'\"
'\" Copyright (c) 1993-1998 Lucent Technologies, Inc.
'\" Copyright (c) 2008 Jos Decoster
'\"
'\" Permission to use, copy, modify, and distribute this software and its
'\" documentation for any purpose and without fee is hereby granted, provided
'\" that the above copyright notice appear in all copies and that both that
'\" the copyright notice and warranty disclaimer appear in supporting
'\" documentation, and that the names of Lucent Technologies any of their
'\" entities not be used in advertising or publicity pertaining to
'\" distribution of the software without specific, written prior permission.
'\"
'\" Lucent Technologies disclaims all warranties with regard to this software,
'\" including all implied warranties of merchantability and fitness. In no
'\" event shall Lucent Technologies be liable for any special, indirect or
'\" consequential damages or any damages whatsoever resulting from loss of
'\" use, data or profits, whether in an action of contract, negligence or
'\" other tortuous action, arising out of or in connection with the use or
'\" performance of this software.
'\"
'\" BLT::busy command created by George Howlett.
'\"
'\" See the file "license.terms" for information on usage and redistribution
'\" of this file, and for a DISCLAIMER OF ALL WARRANTIES.
'\"
.TH busy n "" Tk "Tk Built-In Commands"
.so man.macros
.BS
'\" Note:  do not modify the .SH NAME line immediately below!
.SH NAME
busy \- Make Tk widgets busy, temporarily blocking user interactions
.SH SYNOPSIS
\fBtk busy\fR \fIwindow \fR?\fIoptions\fR?
.sp
\fBtk busy busywindow \fIwindow\fR
.sp
\fBtk busy hold\fR \fIwindow \fR?\fIoptions\fR?
.sp
\fBtk busy configure \fIwindow\fR ?\fIoption value\fR?...
.sp
\fBtk busy forget\fR \fIwindow \fR?\fIwindow \fR?...
.sp
\fBtk busy current\fR ?\fIpattern\fR?
.sp
\fBtk busy status \fIwindow\fR
.BE
.SH DESCRIPTION
.PP
The \fBtk busy\fR command provides a simple means to block mouse pointer events
from Tk widgets, while overriding the widget's cursor with a configurable busy
cursor. Note this command does not prevent keyboard events from being sent to
the widgets made busy.
.SH INTRODUCTION
.PP
There are many times in applications where you want to temporarily restrict
what actions the user can take. For example, an application could have a
.QW Run
button that when pressed causes some processing to occur. However, while the
application is busy processing, you probably don't want the user to be
able to click the
.QW Run
button again. You may also want restrict the user from other tasks such as
clicking a
.QW Print
button.
.PP
The \fBtk busy\fR command lets you make Tk widgets busy. This means that user
interactions such as button clicks, moving the mouse, typing at the keyboard,
etc.\0are ignored by the widget. You can set a special cursor (like a watch)
that overrides the widget's normal cursor, providing feedback that the
application (widget) is temporarily busy.
.PP
When a widget is made busy, the widget and all of its descendants will ignore
pointer events. It's easy to make an entire panel of widgets busy. You can
simply make the toplevel widget (such as
.QW . )
busy. This is easier and far much more efficient than recursively traversing
the widget hierarchy, disabling each widget and re-configuring its cursor.
.PP
Often, the \fBtk busy\fR command can be used instead of Tk's \fBgrab\fR
command. Unlike \fBgrab\fR which restricts all user interactions to one
widget, with the \fBtk busy\fR command you can have more than one widget
active (for example, a
.QW Cancel
dialog and a
.QW Help
button).
.SS EXAMPLE
.PP
You can make several widgets busy by simply making its ancestor widget busy
using the \fBhold\fR operation.
.PP
.CS
frame .top
button .top.button; canvas .top.canvas
pack .top.button .top.canvas
pack .top
# . . .
\fBtk busy\fR hold .top
update
.CE
.PP
All the widgets within \fB.top\fR (including \fB.top\fR) are now busy. Using
\fBupdate\fR insures that \fBtk busy\fR command will take effect before any
other user events can occur.
.PP
When the application is no longer busy processing, you can allow user
interactions again and free any resources it allocated by the \fBforget\fR
operation.
.PP
.CS
\fBtk busy\fR forget .top
.CE
.PP
The busy window has a configurable cursor. You can change the busy cursor
using the \fBconfigure\fR operation.
.PP
.CS
\fBtk busy\fR configure .top \-cursor "watch"
.CE
.PP
Destroying the widget will also clean up any resources allocated by the \fBtk
busy\fR command.
.PP
.SH OPERATIONS
.PP
The following operations are available for the \fBtk busy\fR command:
.TP
\fBtk busy \fIwindow\fR ?\fIoption value\fR?...
.
Shortcut for \fBtk busy hold\fR command.
.TP
\fBtk busy busywindow \fIwindow\fR
.
Returns the pathname of the busy window (i.e. the transparent window
shielding the window appearing busy) created by the \fBtk busy hold\fR
command for \fIwindow\fR, or the empty string if \fIwindow\fR is not busy.
.TP
\fBtk busy cget \fIwindow\fR \fIoption\fR
.
Queries the \fBtk busy\fR command configuration options for \fIwindow\fR.
\fIWindow\fR must be the path name of a widget previously made busy by the
\fBhold\fR operation. The command returns the present value of the specified
\fIoption\fR. \fIOption\fR may have any of the values accepted by the
\fBhold\fR operation.
.TP
\fBtk busy configure \fIwindow\fR ?\fIoption value\fR?...
.
Queries or modifies the \fBtk busy\fR command configuration options for
\fIwindow\fR. \fIWindow\fR must be the path name of a widget previously made
busy by the \fBhold\fR operation.  If no options are specified, a list
describing all of the available options for \fIwindow\fR (see
\fBTk_ConfigureInfo\fR for information on the format of this list) is
returned. If \fIoption\fR is specified with no \fIvalue\fR, then the command
returns a list describing the one named option (this list will be identical to
the corresponding sublist of the value returned if no \fIoption\fR is
specified). If one or more \fIoption\-value\fR pairs are specified, then the
command modifies the given widget option(s) to have the given value(s); in
this case the command returns the empty string. \fIOption\fR may have any of
the values accepted by the \fBhold\fR operation.
.RS
.PP
Please note that the option database is referenced through \fIwindow\fR. For
example, if the widget \fB.frame\fR is to be made busy, the busy cursor can be
specified for it by either \fBoption\fR command:
.PP
.CS
option add *frame.busyCursor gumby
option add *Frame.BusyCursor gumby
.CE
.RE
.TP
\fBtk busy current \fR?\fIpattern\fR?
.
Returns the pathnames of all widgets that are currently busy. If a
\fIpattern\fR is given, only the path names of busy widgets matching
\fIpattern\fR are returned.
.TP
\fBtk busy forget \fIwindow\fR ?\fIwindow\fR?...
.
Releases resources allocated by the \fBtk busy\fR command for \fIwindow\fR,
including the transparent window. User events will again be received by
\fIwindow\fR. Resources are also released when \fIwindow\fR is destroyed.
\fIWindow\fR must be the name of a widget specified in the \fBhold\fR
operation, otherwise an error is reported.
.TP
\fBtk busy hold \fIwindow\fR ?\fIoption value\fR?...
.
Makes the specified \fIwindow\fR (and its descendants in the Tk window
hierarchy) appear busy. \fIWindow\fR must be a valid path name of a Tk widget.
A transparent window is put in front of the specified window. This transparent
window is mapped the next time idle tasks are processed, and the specified
window and its descendants will be blocked from user interactions. Normally
\fBupdate\fR should be called immediately afterward to insure that the hold
operation is in effect before the application starts its processing. The
command returns the pathname of the busy window that was created (i.e. the
transparent window shielding the window appearing busy). The following
configuration options are valid:
.RS
.TP
\fB\-cursor \fIcursorName\fR
.
Specifies the cursor to be displayed when the widget is made busy.
\fICursorName\fR can be in any form accepted by \fBTk_GetCursor\fR. The
default cursor is \fBwait\fR on Windows and \fBwatch\fR on other platforms.
.RE
.TP
\fBtk busy status \fIwindow\fR
.
Returns the status of a widget \fIwindow\fR. If \fIwindow\fR presently can not
receive user interactions, \fB1\fR is returned, otherwise \fB0\fR.
.SH "EVENT HANDLING"
.SS BINDINGS
.PP
The event blocking feature is implemented by creating and mapping a
transparent window that completely covers the widget. When the busy window is
mapped, it invisibly shields the widget and its hierarchy from all events that
may be sent. Like Tk widgets, busy windows have widget names in the Tk window
hierarchy. This means that you can use the \fBbind\fR command to handle
events in the busy window:
.PP
.CS
\fBtk busy\fR hold .frame.canvas
bind [\fBtk busy\fR busywindow .frame.canvas] <Enter> { ... }
.CE
.PP
or
.CS
set busyWin [\fBtk busy\fR hold .frame.canvas]
bind $busyWin <Enter> { ... }
.CE
.SS "ENTER/LEAVE EVENTS"
.PP
Mapping and unmapping busy windows generates Enter/Leave events for all
widgets they cover. Please note this if you are tracking Enter/Leave events in
widgets.
.SS "KEYBOARD EVENTS"
.PP
When a widget is made busy, the widget is prevented from gaining the keyboard
focus by a user clicking on it by the busy window. But if the widget already had
focus, it still may receive keyboard events. The widget can also still receive
focus through keyboard traversal. To prevent this, you must move
focus to another window and make sure the focus can not go back to the widgets
made busy (e.g. but restricting focus to a cancel button).
.PP
.CS
pack [frame .frame]
pack [text .frame.text]
\fBtk busy\fR hold .frame
pack [button .cancel -text "Cancel" -command exit]
focus .cancel
bind .cancel <Tab> {break}
bind .cancel <Shift-Tab> {break}
update
.CE
.PP
The above example moves the focus from .frame immediately after invoking the
\fBhold\fR so that no keyboard events will be sent to \fB.frame\fR or any of
its descendants. It also makes sure it's not possible to leave button
\fB.cancel\fR using the keyboard.
.SH PORTABILITY
.PP
Note that the \fBtk busy\fR command does not currently have any effect on OSX
when Tk is built using Aqua support.
.SH "SEE ALSO"
grab(n)
.SH KEYWORDS
busy, keyboard events, pointer events, window
'\" Local Variables:
'\" mode: nroff
'\" End:
