# This file is a Tcl script to test out the "pack" command
# of Tk.  It is organized in the standard fashion for Tcl tests.
#
# Copyright (c) 1993 The Regents of the University of California.
# Copyright (c) 1994 Sun Microsystems, Inc.
# Copyright (c) 1998-1999 by Scriptics Corporation.
# All rights reserved.
#
# RCS: @(#) $Id: pack.test,v 1.14 2006/04/05 18:04:39 dgp Exp $

package require tcltest 2.1
eval tcltest::configure $argv
tcltest::loadTestedCommands

# Utility procedures:

proc pack1 {args} {
    pack forget .pack.a .pack.b .pack.c .pack.d
    eval pack .pack.a $args
    pack .pack.b -expand yes -fill both
    update
    list [winfo geometry .pack.a] [winfo geometry .pack.b]
}
proc pack2 {args} {
    pack forget .pack.a .pack.b .pack.c .pack.d
    eval pack .pack.a $args
    update
    winfo geometry .pack.a
}
proc pack3 {args} {
    pack forget .pack.a .pack.b .pack.c .pack.d
    pack .pack.a -side  top
    pack .pack.c -side left
    eval pack .pack.b $args
    update
    winfo geometry .pack.b
}
proc pack4 {option value} {
    pack forget .pack.a .pack.b .pack.c .pack.d
    pack .pack.a $option $value
    set i [pack info .pack.a]
    lindex $i [expr [lsearch -exact $i $option]+1]
}

# Create some test windows.

catch {destroy .pack}
toplevel .pack
wm geom .pack 300x200+0+0
wm minsize .pack 1 1
update idletasks
foreach i {a b c d} {
    frame .pack.$i
    label .pack.$i.label -text $i -relief raised
    place .pack.$i.label -relwidth 1.0 -relheight 1.0
}
.pack.a config -width 20 -height 40
.pack.b config -width 50 -height 30
.pack.c config -width 80 -height 80
.pack.d config -width 40 -height 30

test pack-1.1 {-side option} {
    pack1 -side top
} {20x40+140+0 300x160+0+40}
test pack-1.2 {-side option} {
    pack1 -side bottom
} {20x40+140+160 300x160+0+0}
test pack-1.3 {-side option} {
    pack1 -side left
} {20x40+0+80 280x200+20+0}
test pack-1.4 {-side option} {
    pack1 -side right
} {20x40+280+80 280x200+0+0}

test pack-2.1 {x padding and filling} {
    pack1 -side right -padx 20
} {20x40+260+80 240x200+0+0}
test pack-2.1.1 {x padding and filling} {
    pack1 -side right -padx {10 30}
} {20x40+250+80 240x200+0+0}
test pack-2.1.2 {x padding and filling} {
    pack1 -side right -padx {35 5}
} {20x40+275+80 240x200+0+0}
test pack-2.2 {x padding and filling} {
    pack1 -side right -ipadx 20
} {60x40+240+80 240x200+0+0}
test pack-2.3 {x padding and filling} {
    pack1 -side right -ipadx 5 -padx 10
} {30x40+260+80 250x200+0+0}
test pack-2.4 {x padding and filling} {
    pack1 -side right -padx 20 -fill x
} {20x40+260+80 240x200+0+0}
test pack-2.4.1 {x padding and filling} {
    pack1 -side right -padx {9 31} -fill x
} {20x40+249+80 240x200+0+0}
test pack-2.5 {x padding and filling} {
    pack1 -side right -ipadx 20 -fill x
} {60x40+240+80 240x200+0+0}
test pack-2.6 {x padding and filling} {
    pack1 -side right -ipadx 5 -padx 10 -fill x
} {30x40+260+80 250x200+0+0}
test pack-2.6.1 {x padding and filling} {
    pack1 -side right -ipadx 5 -padx {5 15} -fill x
} {30x40+255+80 250x200+0+0}
test pack-2.7 {x padding and filling} {
    pack1 -side top -padx 20
} {20x40+140+0 300x160+0+40}
test pack-2.7.1 {x padding and filling} {
    pack1 -side top -padx {0 40}
} {20x40+120+0 300x160+0+40}
test pack-2.7.2 {x padding and filling} {
    pack1 -side top -padx {31 9}
} {20x40+151+0 300x160+0+40}
test pack-2.8 {x padding and filling} {
    pack1 -side top -ipadx 20
} {60x40+120+0 300x160+0+40}
test pack-2.9 {x padding and filling} {
    pack1 -side top -ipadx 5 -padx 10
} {30x40+135+0 300x160+0+40}
test pack-2.9.1 {x padding and filling} {
    pack1 -side top -ipadx 5 -padx {5 15}
} {30x40+130+0 300x160+0+40}
test pack-2.10 {x padding and filling} {
    pack1 -side top -padx 20 -fill x
} {260x40+20+0 300x160+0+40}
test pack-2.10.1 {x padding and filling} {
    pack1 -side top -padx {25 15} -fill x
} {260x40+25+0 300x160+0+40}
test pack-2.11 {x padding and filling} {
    pack1 -side top -ipadx 20 -fill x
} {300x40+0+0 300x160+0+40}
test pack-2.12 {x padding and filling} {
    pack1 -side top -ipadx 5 -padx 10 -fill x
} {280x40+10+0 300x160+0+40}
test pack-2.12a {x padding and filling} {
    pack1 -side top -ipadx 5 -padx {5 15} -fill x
} {280x40+5+0 300x160+0+40}
set pad [winfo pixels .pack 1c]
test pack-2.13 {x padding and filling} {
    pack forget .pack.a .pack.b .pack.c .pack.d
    pack .pack.a -padx 1c
    set x [pack info .pack.a]
    lindex $x [expr [lsearch -exact $x -padx]+1]
} $pad
test pack-2.14 {x padding and filling} {
    pack forget .pack.a .pack.b .pack.c .pack.d
    pack .pack.a -ipadx 1c
    set x [pack info .pack.a]
    lindex $x [expr [lsearch -exact $x -ipadx]+1]
} $pad

test pack-3.1 {y padding and filling} {
    pack1 -side right -pady 20
} {20x40+280+80 280x200+0+0}
test pack-3.1.1 {y padding and filling} {
    pack1 -side right -pady {5 35}
} {20x40+280+65 280x200+0+0}
test pack-3.1.2 {y padding and filling} {
    pack1 -side right -pady {40 0}
} {20x40+280+100 280x200+0+0}
test pack-3.2 {y padding and filling} {
    pack1 -side right -ipady 20
} {20x80+280+60 280x200+0+0}
test pack-3.3 {y padding and filling} {
    pack1 -side right -ipady 5 -pady 10
} {20x50+280+75 280x200+0+0}
test pack-3.3.1 {y padding and filling} {
    pack1 -side right -ipady 5 -pady {5 15}
} {20x50+280+70 280x200+0+0}
test pack-3.4 {y padding and filling} {
    pack1 -side right -pady 20 -fill y
} {20x160+280+20 280x200+0+0}
test pack-3.4.1 {y padding and filling} {
    pack1 -side right -pady {35 5} -fill y
} {20x160+280+35 280x200+0+0}
test pack-3.5 {y padding and filling} {
    pack1 -side right -ipady 20 -fill y
} {20x200+280+0 280x200+0+0}
test pack-3.6 {y padding and filling} {
    pack1 -side right -ipady 5 -pady 10 -fill y
} {20x180+280+10 280x200+0+0}
test pack-3.6.1 {y padding and filling} {
    pack1 -side right -ipady 5 -pady {0 20} -fill y
} {20x180+280+0 280x200+0+0}
test pack-3.7 {y padding and filling} {
    pack1 -side top -pady 20
} {20x40+140+20 300x120+0+80}
test pack-3.7.1 {y padding and filling} {
    pack1 -side top -pady {40 0}
} {20x40+140+40 300x120+0+80}
test pack-3.8 {y padding and filling} {
    pack1 -side top -ipady 20
} {20x80+140+0 300x120+0+80}
test pack-3.9 {y padding and filling} {
    pack1 -side top -ipady 5 -pady 10
} {20x50+140+10 300x130+0+70}
test pack-3.9.1 {y padding and filling} {
    pack1 -side top -ipady 5 -pady {3 17}
} {20x50+140+3 300x130+0+70}
test pack-3.10 {y padding and filling} {
    pack1 -side top -pady 20 -fill y
} {20x40+140+20 300x120+0+80}
test pack-3.10.1 {y padding and filling} {
    pack1 -side top -pady {39 1} -fill y
} {20x40+140+39 300x120+0+80}
test pack-3.11 {y padding and filling} {
    pack1 -side top -ipady 20 -fill y
} {20x80+140+0 300x120+0+80}
test pack-3.12 {y padding and filling} {
    pack1 -side top -ipady 5 -pady 10 -fill y
} {20x50+140+10 300x130+0+70}
test pack-3.12.1 {y padding and filling} {
    pack1 -side top -ipady 5 -pady {1 19} -fill y
} {20x50+140+1 300x130+0+70}
set pad [winfo pixels .pack 1c]
test pack-3.13 {y padding and filling} {
    pack forget .pack.a .pack.b .pack.c .pack.d
    pack .pack.a -pady 1c
    set x [pack info .pack.a]
    lindex $x [expr [lsearch -exact $x -pady]+1]
} $pad
test pack-3.14 {y padding and filling} {
    pack forget .pack.a .pack.b .pack.c .pack.d
    pack .pack.a -ipady 1c
    set x [pack info .pack.a]
    lindex $x [expr [lsearch -exact $x -ipady]+1]
} $pad

test pack-4.1 {anchors} {
    pack2 -side top -ipadx 5 -padx 10 -ipady 15 -pady 20 -expand y -anchor n
} {30x70+135+20}
test pack-4.2 {anchors} {
    pack2 -side top -ipadx 5 -padx 10 -ipady 15 -pady 20 -expand y -anchor ne
} {30x70+260+20}
test pack-4.3 {anchors} {
    pack2 -side top -ipadx 5 -padx 10 -ipady 15 -pady 20 -expand y -anchor e
} {30x70+260+65}
test pack-4.4 {anchors} {
    pack2 -side top -ipadx 5 -padx 10 -ipady 15 -pady 20 -expand y -anchor se
} {30x70+260+110}
test pack-4.5 {anchors} {
    pack2 -side top -ipadx 5 -padx 10 -ipady 15 -pady 20 -expand y -anchor s
} {30x70+135+110}
test pack-4.6 {anchors} {
    pack2 -side top -ipadx 5 -padx 10 -ipady 15 -pady 20 -expand y -anchor sw
} {30x70+10+110}
test pack-4.7 {anchors} {
    pack2 -side top -ipadx 5 -padx 10 -ipady 15 -pady 20 -expand y -anchor w
} {30x70+10+65}
test pack-4.8 {anchors} {
    pack2 -side top -ipadx 5 -padx 10 -ipady 15 -pady 20 -expand y -anchor nw
} {30x70+10+20}
test pack-4.9 {anchors} {
    pack2 -side top -ipadx 5 -padx 10 -ipady 15 -pady 20 -expand y -anchor center
} {30x70+135+65}

# Repeat above tests, but with a frame that isn't at (0,0), so that
# we can be sure that the frame offset is being added in correctly.

test pack-5.1 {more anchors} {
    pack3 -side top -ipadx 5 -padx 10 -ipady 15 -pady 20 -expand y -anchor n
} {60x60+160+60}
test pack-5.2 {more anchors} {
    pack3 -side top -ipadx 5 -padx 10 -ipady 15 -pady 20 -expand y -anchor ne
} {60x60+230+60}
test pack-5.3 {more anchors} {
    pack3 -side top -ipadx 5 -padx 10 -ipady 15 -pady 20 -expand y -anchor e
} {60x60+230+90}
test pack-5.4 {more anchors} {
    pack3 -side top -ipadx 5 -padx 10 -ipady 15 -pady 20 -expand y -anchor se
} {60x60+230+120}
test pack-5.5 {more anchors} {
    pack3 -side top -ipadx 5 -padx 10 -ipady 15 -pady 20 -expand y -anchor s
} {60x60+160+120}
test pack-5.6 {more anchors} {
    pack3 -side top -ipadx 5 -padx 10 -ipady 15 -pady 20 -expand y -anchor sw
} {60x60+90+120}
test pack-5.7 {more anchors} {
    pack3 -side top -ipadx 5 -padx 10 -ipady 15 -pady 20 -expand y -anchor w
} {60x60+90+90}
test pack-5.8 {more anchors} {
    pack3 -side top -ipadx 5 -padx 10 -ipady 15 -pady 20 -expand y -anchor nw
} {60x60+90+60}
test pack-5.9 {more anchors} {
    pack3 -side top -ipadx 5 -padx 10 -ipady 15 -pady 20 -expand y -anchor center
} {60x60+160+90}

test pack-6.1 {-expand option} {
    pack forget .pack.a .pack.b .pack.c .pack.d
    pack .pack.a .pack.b .pack.c .pack.d -side left
    update
    list [winfo geometry .pack.a] [winfo geometry .pack.b] \
	    [winfo geometry .pack.c] [winfo geometry .pack.d]
} {20x40+0+80 50x30+20+85 80x80+70+60 40x30+150+85}
test pack-6.2 {-expand option} {
    pack forget .pack.a .pack.b .pack.c .pack.d
    pack .pack.a -side left -expand yes
    pack .pack.b -side left
    pack .pack.c .pack.d -side left -expand 1
    update
    list [winfo geometry .pack.a] [winfo geometry .pack.b] \
	    [winfo geometry .pack.c] [winfo geometry .pack.d]
} {20x40+18+80 50x30+56+85 80x80+124+60 40x30+241+85}
test pack-6.3 {-expand option} {
    pack forget .pack.a .pack.b .pack.c .pack.d
    pack .pack.a .pack.b .pack.c .pack.d -side top
    update
    list [winfo geometry .pack.a] [winfo geometry .pack.b] \
	    [winfo geometry .pack.c] [winfo geometry .pack.d]
} {20x40+140+0 50x30+125+40 80x80+110+70 40x30+130+150}
test pack-6.4 {-expand option} {
    pack forget .pack.a .pack.b .pack.c .pack.d
    pack .pack.a -side top -expand yes
    pack .pack.b -side top
    pack .pack.c .pack.d -side top -expand 1
    update
    list [winfo geometry .pack.a] [winfo geometry .pack.b] \
	    [winfo geometry .pack.c] [winfo geometry .pack.d]
} {20x40+140+3 50x30+125+46 80x80+110+79 40x30+130+166}
test pack-6.5 {-expand option} {
    pack forget .pack.a .pack.b .pack.c .pack.d
    pack .pack.a .pack.b .pack.c .pack.d -side right
    update
    list [winfo geometry .pack.a] [winfo geometry .pack.b] \
	    [winfo geometry .pack.c] [winfo geometry .pack.d]
} {20x40+280+80 50x30+230+85 80x80+150+60 40x30+110+85}
test pack-6.6 {-expand option} {
    pack forget .pack.a .pack.b .pack.c .pack.d
    pack .pack.a -side right -expand yes
    pack .pack.b -side right
    pack .pack.c .pack.d -side right -expand 1
    update
    list [winfo geometry .pack.a] [winfo geometry .pack.b] \
	    [winfo geometry .pack.c] [winfo geometry .pack.d]
} {20x40+262+80 50x30+194+85 80x80+95+60 40x30+18+85}
test pack-6.7 {-expand option} {
    pack forget .pack.a .pack.b .pack.c .pack.d
    pack .pack.a .pack.b .pack.c .pack.d -side bottom
    update
    list [winfo geometry .pack.a] [winfo geometry .pack.b] \
	    [winfo geometry .pack.c] [winfo geometry .pack.d]
} {20x40+140+160 50x30+125+130 80x80+110+50 40x30+130+20}
test pack-6.8 {-expand option} {
    pack forget .pack.a .pack.b .pack.c .pack.d
    pack .pack.a -side bottom -expand yes
    pack .pack.b -side bottom
    pack .pack.c .pack.d -side bottom -expand 1
    update
    list [winfo geometry .pack.a] [winfo geometry .pack.b] \
	    [winfo geometry .pack.c] [winfo geometry .pack.d]
} {20x40+140+157 50x30+125+124 80x80+110+40 40x30+130+3}
test pack-6.9 {-expand option} {
    pack forget .pack.a .pack.b .pack.c .pack.d
    pack .pack.a -side bottom -expand yes -fill both
    pack .pack.b -side right
    pack .pack.c -side top -expand 1 -fill both
    pack .pack.d -side left
    update
    list [winfo geometry .pack.a] [winfo geometry .pack.b] \
	    [winfo geometry .pack.c] [winfo geometry .pack.d]
} {300x65+0+135 50x30+250+52 250x105+0+0 40x30+0+105}
test pack-6.10 {-expand option} {
    pack forget .pack.a .pack.b .pack.c .pack.d
    pack .pack.a -side left -expand yes -fill both
    pack .pack.b -side top
    pack .pack.c -side right -expand 1 -fill both
    pack .pack.d -side bottom
    update
    list [winfo geometry .pack.a] [winfo geometry .pack.b] \
	    [winfo geometry .pack.c] [winfo geometry .pack.d]
} {100x200+0+0 50x30+175+0 160x170+140+30 40x30+100+170}
test pack-6.11 {-expand option} {
    pack forget .pack.a .pack.b .pack.c .pack.d
    pack .pack.a -side left -expand yes -fill both
    pack .pack.b -side top -expand yes -fill both
    pack .pack.c -side right -expand 1 -fill both
    pack .pack.d -side bottom -expand yes -fill both
    update
    list [winfo geometry .pack.a] [winfo geometry .pack.b] \
	    [winfo geometry .pack.c] [winfo geometry .pack.d]
} {100x200+0+0 200x100+100+0 160x100+140+100 40x100+100+100}
catch {destroy .pack2}
toplevel .pack2 -height 400 -width 400
wm geometry .pack2 +0+0
pack propagate .pack2 0
pack forget .pack2.a .pack2.b .pack2.c .pack2.d
foreach i {w1 w2 w3} {
    frame .pack2.$i -width 30 -height 30 -bd 2 -relief raised
    label .pack2.$i.l -text $i
    place .pack2.$i.l -relwidth 1.0 -relheight 1.0
}
test pack-6.12 {-expand option} {
    pack .pack2.w1 .pack2.w2 .pack2.w3 -padx 5 -ipadx 4 -pady 2 -ipady 6 -expand 1 -side left
    update
    list [winfo geometry .pack2.w1] [winfo geometry .pack2.w2] [winfo geometry .pack2.w3]
} {38x42+47+179 38x42+180+179 38x42+314+179}
test pack-6.13 {-expand option} {
    pack forget .pack2.w1 .pack2.w2 .pack2.w3
    pack .pack2.w1 .pack2.w2 .pack2.w3 -padx 5 -ipadx 4 -pady 2 \
	    -ipady 6 -expand 1 -side top
    update
    list [winfo geometry .pack2.w1] [winfo geometry .pack2.w2] [winfo geometry .pack2.w3]
} {38x42+181+45 38x42+181+178 38x42+181+312}
catch {destroy .pack2}

wm geometry .pack {}
test pack-7.1 {requesting size for parent} {
    pack forget .pack.a .pack.b .pack.c .pack.d
    pack .pack.a .pack.b .pack.c .pack.d -side left -padx 5 -pady 10
    update
    list [winfo reqwidth .pack] [winfo reqheight .pack]
} {230 100}
test pack-7.2 {requesting size for parent} {
    pack forget .pack.a .pack.b .pack.c .pack.d
    pack .pack.a .pack.b .pack.c .pack.d -side top -padx 5 -pady 10
    update
    list [winfo reqwidth .pack] [winfo reqheight .pack]
} {90 260}
test pack-7.3 {requesting size for parent} {
    pack forget .pack.a .pack.b .pack.c .pack.d
    pack .pack.a .pack.b .pack.c .pack.d -side right -padx 5 -pady 10
    update
    list [winfo reqwidth .pack] [winfo reqheight .pack]
} {230 100}
test pack-7.4 {requesting size for parent} {
    pack forget .pack.a .pack.b .pack.c .pack.d
    pack .pack.a .pack.b .pack.c .pack.d -side bottom -padx 5 -pady 10
    update
    list [winfo reqwidth .pack] [winfo reqheight .pack]
} {90 260}
test pack-7.5 {requesting size for parent} {
    pack forget .pack.a .pack.b .pack.c .pack.d
    pack .pack.a -side top -padx 5 -pady 10
    pack .pack.b -side right -padx 5 -pady 10
    pack .pack.c -side bottom -padx 5 -pady 10
    pack .pack.d -side left -padx 5 -pady 10
    update
    list [winfo reqwidth .pack] [winfo reqheight .pack]
} {150 210}
test pack-7.6 {requesting size for parent} {
    pack forget .pack.a .pack.b .pack.c .pack.d
    pack .pack.a -side top
    pack .pack.c -side left
    pack .pack.d -side bottom
    update
    list [winfo reqwidth .pack] [winfo reqheight .pack]
} {120 120}
test pack-7.7 {requesting size for parent} {
    pack forget .pack.a .pack.b .pack.c .pack.d
    pack .pack.a -side right
    pack .pack.c -side bottom
    pack .pack.d -side top
    update
    list [winfo reqwidth .pack] [winfo reqheight .pack]
} {100 110}


# For the tests below, create a couple of "pad" windows to shrink
# the available space for the remaining windows.  The tests have to
# be done this way rather than shrinking the whole window, because
# some window managers like mwm won't let a top-level window get
# very small.

pack forget .pack.a .pack.b .pack.c .pack.d
frame .pack.right -width 200 -height 10 -bd 2 -relief raised
frame .pack.bottom -width 10 -height 150 -bd 2 -relief raised
pack .pack.right -side right
pack .pack.bottom -side bottom
pack .pack.a .pack.b .pack.c -side top
update
test pack-8.1 {insufficient space} {
    list [winfo geometry .pack.a] [winfo ismapped .pack.a] \
	    [winfo geometry .pack.b] [winfo ismapped .pack.b] \
	    [winfo geometry .pack.c] [winfo ismapped .pack.c]
} {20x40+30+0 1 50x30+15+40 1 80x80+0+70 1}
wm geom .pack 270x250
update
test pack-8.2 {insufficient space} {
    list [winfo geometry .pack.a] [winfo ismapped .pack.a] \
	    [winfo geometry .pack.b] [winfo ismapped .pack.b] \
	    [winfo geometry .pack.c] [winfo ismapped .pack.c]
} {20x40+25+0 1 50x30+10+40 1 70x30+0+70 1}
wm geom .pack 240x220
update
test pack-8.3 {insufficient space} {
    list [winfo geometry .pack.a] [winfo ismapped .pack.a] \
	    [winfo geometry .pack.b] [winfo ismapped .pack.b] \
	    [winfo geometry .pack.c] [winfo ismapped .pack.c]
} {20x40+10+0 1 40x30+0+40 1 70x30+0+70 0}
wm geom .pack 350x350
update
test pack-8.4 {insufficient space} {
    list [winfo geometry .pack.a] [winfo ismapped .pack.a] \
	    [winfo geometry .pack.b] [winfo ismapped .pack.b] \
	    [winfo geometry .pack.c] [winfo ismapped .pack.c]
} {20x40+65+0 1 50x30+50+40 1 80x80+35+70 1}
wm geom .pack {}
pack .pack.a -side left
pack .pack.b -side right
pack .pack.c -side left
update
test pack-8.5 {insufficient space} {
    list [winfo geometry .pack.a] [winfo ismapped .pack.a] \
	    [winfo geometry .pack.b] [winfo ismapped .pack.b] \
	    [winfo geometry .pack.c] [winfo ismapped .pack.c]
} {20x40+0+20 1 50x30+100+25 1 80x80+20+0 1}
wm geom .pack 320x180
update
test pack-8.6 {insufficient space} {
    list [winfo geometry .pack.a] [winfo ismapped .pack.a] \
	    [winfo geometry .pack.b] [winfo ismapped .pack.b] \
	    [winfo geometry .pack.c] [winfo ismapped .pack.c]
} {20x30+0+0 1 50x30+70+0 1 50x30+20+0 1}
wm geom .pack 250x180
update
test pack-8.7 {insufficient space} {
    list [winfo geometry .pack.a] [winfo ismapped .pack.a] \
	    [winfo geometry .pack.b] [winfo ismapped .pack.b] \
	    [winfo geometry .pack.c] [winfo ismapped .pack.c]
} {20x30+0+0 1 30x30+20+0 1 50x30+20+0 0}
pack forget .pack.b
update
test pack-8.8 {insufficient space} {
    list [winfo geometry .pack.a] [winfo ismapped .pack.a] \
	    [winfo geometry .pack.b] [winfo ismapped .pack.b] \
	    [winfo geometry .pack.c] [winfo ismapped .pack.c]
} {20x30+0+0 1 30x30+20+0 0 30x30+20+0 1}
pack .pack.b -side right -after .pack.a
wm geom .pack {}
update
test pack-8.9 {insufficient space} {
    list [winfo geometry .pack.a] [winfo ismapped .pack.a] \
	    [winfo geometry .pack.b] [winfo ismapped .pack.b] \
	    [winfo geometry .pack.c] [winfo ismapped .pack.c]
} {20x40+0+20 1 50x30+100+25 1 80x80+20+0 1}
pack forget .pack.right .pack.bottom

test pack-9.1 {window ordering} {
    pack forget .pack.a .pack.b .pack.c .pack.d
    pack .pack.a .pack.b .pack.c .pack.d -side top
    pack .pack.a -after .pack.b
    pack slaves .pack
} {.pack.b .pack.a .pack.c .pack.d}
test pack-9.2 {window ordering} {
    pack forget .pack.a .pack.b .pack.c .pack.d
    pack .pack.a .pack.b .pack.c .pack.d -side top
    pack .pack.a -after .pack.a
    pack slaves .pack
} {.pack.a .pack.b .pack.c .pack.d}
test pack-9.3 {window ordering} {
    pack forget .pack.a .pack.b .pack.c .pack.d
    pack .pack.a .pack.b .pack.c .pack.d -side top
    pack .pack.a -before .pack.d
    pack slaves .pack
} {.pack.b .pack.c .pack.a .pack.d}
test pack-9.4 {window ordering} {
    pack forget .pack.a .pack.b .pack.c .pack.d
    pack .pack.a .pack.b .pack.c .pack.d -side top
    pack .pack.d -before .pack.a
    pack slaves .pack
} {.pack.d .pack.a .pack.b .pack.c}
test pack-9.5 {window ordering} {
    pack forget .pack.a .pack.b .pack.c .pack.d
    pack .pack.a .pack.b .pack.c .pack.d -side top
    pack propagate .pack.c 0
    pack .pack.a -in .pack.c
    list [pack slaves .pack] [pack slaves .pack.c]
} {{.pack.b .pack.c .pack.d} .pack.a}
test pack-9.6 {window ordering} {
    pack forget .pack.a .pack.b .pack.c .pack.d
    pack .pack.a .pack.b .pack.c .pack.d -side top
    pack .pack.a -in .pack
    pack slaves .pack
} {.pack.b .pack.c .pack.d .pack.a}
test pack-9.7 {window ordering} {
    pack forget .pack.a .pack.b .pack.c .pack.d
    pack .pack.a .pack.b .pack.c .pack.d -side top
    pack .pack.a -padx 0
    pack slaves .pack
} {.pack.a .pack.b .pack.c .pack.d}
test pack-9.8 {window ordering} {
    pack forget .pack.a .pack.b .pack.c .pack.d
    pack .pack.a .pack.b .pack.c
    pack .pack.d
    pack slaves .pack
} {.pack.a .pack.b .pack.c .pack.d}
test pack-9.9 {window ordering} {
    pack forget .pack.a .pack.b .pack.c .pack.d
    pack .pack.a .pack.b .pack.c .pack.d
    pack .pack.b .pack.d .pack.c -before .pack.a
    pack slaves .pack
} {.pack.b .pack.d .pack.c .pack.a}
test pack-9.10 {window ordering} {
    pack forget .pack.a .pack.b .pack.c .pack.d
    pack .pack.a .pack.b .pack.c .pack.d
    pack .pack.a .pack.c .pack.d .pack.b -after .pack.a
    pack slaves .pack
} {.pack.a .pack.c .pack.d .pack.b}

test pack-10.1 {retaining/clearing configuration state} {
    pack forget .pack.a .pack.b .pack.c .pack.d
    pack .pack.a -side bottom -anchor n -padx 1 -pady 2 -ipadx 3 -ipady 4 \
	-fill both -expand 1
    pack forget .pack.a
    pack .pack.a
    pack info .pack.a
} {-in .pack -anchor center -expand 0 -fill none -ipadx 0 -ipady 0 -padx 0 -pady 0 -side top}
test pack-10.2 {retaining/clearing configuration state} {
    pack forget .pack.a .pack.b .pack.c .pack.d
    pack .pack.a -side bottom -anchor n -padx 1 -pady 2 -ipadx 3 -ipady 4 \
	-fill both -expand 1
    pack .pack.a -pady 14
    pack info .pack.a
} {-in .pack -anchor n -expand 1 -fill both -ipadx 3 -ipady 4 -padx 1 -pady 14 -side bottom}
test pack-10.3 {bad -in window does not change master} {
    pack forget .pack.a .pack.b .pack.c .pack.d
    list [winfo manager .pack.a] \
         [catch {pack .pack.a -in .pack.a} err] $err \
         [winfo manager .pack.a]
} {{} 1 {can't pack .pack.a inside itself} {}}

test pack-11.1 {info option} {
    pack4 -in .pack
} .pack
test pack-11.2 {info option} {
    pack4 -anchor n
} n
test pack-11.3 {info option} {
    pack4 -anchor sw
} sw
test pack-11.4 {info option} {
    pack4 -expand yes
} 1
test pack-11.5 {info option} {
    pack4 -expand no
} 0
test pack-11.6 {info option} {
    pack4 -fill x
} x
test pack-11.7 {info option} {
    pack4 -fill y
} y
test pack-11.8 {info option} {
    pack4 -fill both
} both
test pack-11.9 {info option} {
    pack4 -fill none
} none
test pack-11.10 {info option} {
    pack4 -ipadx 14
} 14
test pack-11.11 {info option} {
    pack4 -ipady 22
} 22
test pack-11.12 {info option} {
    pack4 -padx 2
} 2
test pack-11.12.1 {info option} {
    pack4 -padx {2 9}
} {2 9}
test pack-11.13 {info option} {
    pack4 -pady 3
} 3
test pack-11.13.1 {info option} {
    pack4 -pady {3 11}
} {3 11}
test pack-11.14 {info option} {
    pack4 -side top
} top
test pack-11.15 {info option} {
    pack4 -side bottom
} bottom
test pack-11.16 {info option} {
    pack4 -side left
} left
test pack-11.17 {info option} {
    pack4 -side right
} right

test pack-12.1 {command options and errors} {
    list [catch {pack} msg] $msg
} {1 {wrong # args: should be "pack option arg ?arg ...?"}}
test pack-12.2 {command options and errors} {
    list [catch {pack foo} msg] $msg
} {1 {wrong # args: should be "pack option arg ?arg ...?"}}
test pack-12.3 {command options and errors} {
    list [catch {pack configure x} msg] $msg
} {1 {bad argument "x": must be name of window}}
test pack-12.4 {command options and errors} {
    pack forget .pack.a .pack.b .pack.c .pack.d
    pack configure .pack.b .pack.c
    pack slaves .pack
} {.pack.b .pack.c}
test pack-12.5 {command options and errors} {
    pack forget .pack.a .pack.b .pack.c .pack.d
    list [catch {pack .foo} msg] $msg
} {1 {bad window path name ".foo"}}
test pack-12.6 {command options and errors} {
    pack forget .pack.a .pack.b .pack.c .pack.d
    list [catch {pack .pack} msg] $msg
} {1 {can't pack ".pack": it's a top-level window}}
test pack-12.7 {command options and errors} {
    pack forget .pack.a .pack.b .pack.c .pack.d
    list [catch {pack .pack.a -after .foo} msg] $msg
} {1 {bad window path name ".foo"}}
test pack-12.8 {command options and errors} {
    pack forget .pack.a .pack.b .pack.c .pack.d
    list [catch {pack .pack.a -after .pack.b} msg] $msg
} {1 {window ".pack.b" isn't packed}}
test pack-12.9 {command options and errors} {
    pack forget .pack.a .pack.b .pack.c .pack.d
    list [catch {pack .pack.a -anchor gorp} msg] $msg
} {1 {bad anchor "gorp": must be n, ne, e, se, s, sw, w, nw, or center}}
test pack-12.10 {command options and errors} {
    pack forget .pack.a .pack.b .pack.c .pack.d
    list [catch {pack .pack.a -before gorp} msg] $msg
} {1 {bad window path name "gorp"}}
test pack-12.11 {command options and errors} {
    pack forget .pack.a .pack.b .pack.c .pack.d
    list [catch {pack .pack.a -before .pack.b} msg] $msg
} {1 {window ".pack.b" isn't packed}}
test pack-12.12 {command options and errors} {
    pack forget .pack.a .pack.b .pack.c .pack.d
    list [catch {pack .pack.a -expand "who cares?"} msg] $msg
} {1 {expected boolean value but got "who cares?"}}
test pack-12.13 {command options and errors} {
    pack forget .pack.a .pack.b .pack.c .pack.d
    list [catch {pack .pack.a -fill z} msg] $msg
} {1 {bad fill style "z": must be none, x, y, or both}}
test pack-12.14 {command options and errors} {
    pack forget .pack.a .pack.b .pack.c .pack.d
    list [catch {pack .pack.a -in z} msg] $msg
} {1 {bad window path name "z"}}
set pad [winfo pixels .pack 1c]
test pack-12.15 {command options and errors} {
    pack forget .pack.a .pack.b .pack.c .pack.d
    list [catch {pack .pack.a -padx abc} msg] $msg
} {1 {bad pad value "abc": must be positive screen distance}}
test pack-12.15.1 {command options and errors} {
    pack forget .pack.a .pack.b .pack.c .pack.d
    list [catch {pack .pack.a -padx {5 abc}} msg] $msg
} {1 {bad 2nd pad value "abc": must be positive screen distance}}
test pack-12.16 {command options and errors} {
    pack forget .pack.a .pack.b .pack.c .pack.d
    list [catch {pack .pack.a -padx -1} msg] $msg
} {1 {bad pad value "-1": must be positive screen distance}}
test pack-12.16.1 {command options and errors} {
    pack forget .pack.a .pack.b .pack.c .pack.d
    list [catch {pack .pack.a -padx {5 -1}} msg] $msg
} {1 {bad 2nd pad value "-1": must be positive screen distance}}
test pack-12.17 {command options and errors} {
    pack forget .pack.a .pack.b .pack.c .pack.d
    list [catch {pack .pack.a -pady abc} msg] $msg
} {1 {bad pad value "abc": must be positive screen distance}}
test pack-12.17.1 {command options and errors} {
    pack forget .pack.a .pack.b .pack.c .pack.d
    list [catch {pack .pack.a -pady {0 abc}} msg] $msg
} {1 {bad 2nd pad value "abc": must be positive screen distance}}
test pack-12.18 {command options and errors} {
    pack forget .pack.a .pack.b .pack.c .pack.d
    list [catch {pack .pack.a -pady -1} msg] $msg
} {1 {bad pad value "-1": must be positive screen distance}}
test pack-12.18.1 {command options and errors} {
    pack forget .pack.a .pack.b .pack.c .pack.d
    list [catch {pack .pack.a -pady {0 -1}} msg] $msg
} {1 {bad 2nd pad value "-1": must be positive screen distance}}
test pack-12.19 {command options and errors} {
    pack forget .pack.a .pack.b .pack.c .pack.d
    list [catch {pack .pack.a -ipadx abc} msg] $msg
} {1 {bad ipadx value "abc": must be positive screen distance}}
test pack-12.20 {command options and errors} {
    pack forget .pack.a .pack.b .pack.c .pack.d
    list [catch {pack .pack.a -ipadx -1} msg] $msg
} {1 {bad ipadx value "-1": must be positive screen distance}}
test pack-12.20.1 {command options and errors} {
    pack forget .pack.a .pack.b .pack.c .pack.d
    list [catch {pack .pack.a -ipadx {5 5}} msg] $msg
} {1 {bad ipadx value "5 5": must be positive screen distance}}
test pack-12.21 {command options and errors} {
    pack forget .pack.a .pack.b .pack.c .pack.d
    list [catch {pack .pack.a -ipady abc} msg] $msg
} {1 {bad ipady value "abc": must be positive screen distance}}
test pack-12.22 {command options and errors} {
    pack forget .pack.a .pack.b .pack.c .pack.d
    list [catch {pack .pack.a -ipady -1} msg] $msg
} {1 {bad ipady value "-1": must be positive screen distance}}
test pack-12.22.1 {command options and errors} {
    pack forget .pack.a .pack.b .pack.c .pack.d
    list [catch {pack .pack.a -ipady {5 5}} msg] $msg
} {1 {bad ipady value "5 5": must be positive screen distance}}
test pack-12.23 {command options and errors} {
    pack forget .pack.a .pack.b .pack.c .pack.d
    list [catch {pack .pack.a -side bac} msg] $msg
} {1 {bad side "bac": must be top, bottom, left, or right}}
test pack-12.24 {command options and errors} {
    pack forget .pack.a .pack.b .pack.c .pack.d
    list [catch {pack .pack.a -lousy bac} msg] $msg
} {1 {bad option "-lousy": must be -after, -anchor, -before, -expand, -fill, -in, -ipadx, -ipady, -padx, -pady, or -side}}
test pack-12.25 {command options and errors} {
    pack forget .pack.a .pack.b .pack.c .pack.d
    list [catch {pack .pack.a -padx} msg] $msg
} {1 {extra option "-padx" (option with no value?)}}
test pack-12.26 {command options and errors} {
    pack forget .pack.a .pack.b .pack.c .pack.d
    list [catch {pack .pack.a ? 22} msg] $msg
} {1 {bad option "?": must be -after, -anchor, -before, -expand, -fill, -in, -ipadx, -ipady, -padx, -pady, or -side}}
test pack-12.27 {command options and errors} {
    pack forget .pack.a .pack.b .pack.c .pack.d
    list [catch {pack .pack.a -in .} msg] $msg
} {1 {can't pack .pack.a inside .}}
test pack-12.28 {command options and errors} {
    pack forget .pack.a .pack.b .pack.c .pack.d
    frame .pack.a.a
    list [catch {pack .pack.a.a -in .pack.b} msg] $msg
} {1 {can't pack .pack.a.a inside .pack.b}}
test pack-12.29 {command options and errors} {
    pack forget .pack.a .pack.b .pack.c .pack.d
    list [catch {pack .pack.a -in .pack.a} msg] $msg
} {1 {can't pack .pack.a inside itself}}
test pack-12.30 {command options and errors} {
    pack forget .pack.a .pack.b .pack.c .pack.d
    pack .pack.a .pack.b .pack.c .pack.d
    pack forget .pack.a .pack.d
    pack slaves .pack
} {.pack.b .pack.c}
test pack-12.31 {command options and errors} {
    pack forget .pack.a .pack.b .pack.c .pack.d
    .pack configure -width 300 -height 200
    pack propagate .pack 0
    pack .pack.a
    update
    set result [list [winfo reqwidth .pack] [winfo reqheight .pack]]
    pack propagate .pack 1
    update
    lappend result [winfo reqwidth .pack] [winfo reqheight .pack]
    set result
} {300 200 20 40}
test pack-12.32 {command options and errors} {
    set result [pack propagate .pack.d]
    pack propagate .pack.d 0
    lappend result [pack propagate .pack.d]
    pack propagate .pack.d 1
    lappend result [pack propagate .pack.d]
    set result
} {1 0 1}
test pack-12.33 {command options and errors} {
    pack forget .pack.a .pack.b .pack.c .pack.d
    list [catch {pack propagate .dum} msg] $msg
} {1 {bad window path name ".dum"}}
test pack-12.34 {command options and errors} {
    pack forget .pack.a .pack.b .pack.c .pack.d
    list [catch {pack propagate .pack foo} msg] $msg
} {1 {expected boolean value but got "foo"}}
test pack-12.35 {command options and errors} {
    pack forget .pack.a .pack.b .pack.c .pack.d
    list [catch {pack propagate .pack foo bar} msg] $msg
} {1 {wrong # args: should be "pack propagate window ?boolean?"}}
test pack-12.36 {command options and errors} {
    pack forget .pack.a .pack.b .pack.c .pack.d
    list [catch {pack slaves} msg] $msg
} {1 {wrong # args: should be "pack option arg ?arg ...?"}}
test pack-12.37 {command options and errors} {
    pack forget .pack.a .pack.b .pack.c .pack.d
    list [catch {pack slaves a b} msg] $msg
} {1 {wrong # args: should be "pack slaves window"}}
test pack-12.38 {command options and errors} {
    pack forget .pack.a .pack.b .pack.c .pack.d
    list [catch {pack slaves .x} msg] $msg
} {1 {bad window path name ".x"}}
test pack-12.39 {command options and errors} {
    pack forget .pack.a .pack.b .pack.c .pack.d
    list [catch {pack slaves .pack.a} msg] $msg
} {0 {}}
test pack-12.40 {command options and errors} {
    pack forget .pack.a .pack.b .pack.c .pack.d
    list [catch {pack lousy .pack} msg] $msg
} {1 {bad option "lousy": must be configure, forget, info, propagate, or slaves}}

pack .pack.right -side right
pack .pack.bottom -side bottom
test pack-13.1 {window deletion} {
    pack forget .pack.a .pack.b .pack.c .pack.d
    pack .pack.a .pack.d .pack.b .pack.c -side top
    update
    destroy .pack.d
    update
    set result [list [pack slaves .pack] [winfo geometry .pack.a] \
	    [winfo geometry .pack.b] [winfo geometry .pack.c]]
} {{.pack.right .pack.bottom .pack.a .pack.b .pack.c} 20x40+30+0 50x30+15+40 80x80+0+70}

test pack-14.1 {respond to changes in expansion} {
    pack forget .pack.a .pack.b .pack.c .pack.d
    wm geom .pack {}
    pack .pack.a
    update
    set result [winfo geom .pack.a]
    wm geom .pack 400x300
    update
    lappend result [winfo geom .pack.a]
    pack .pack.a -expand true -fill both
    update
    lappend result [winfo geom .pack.a]
} {20x40+0+0 20x40+90+0 200x150+0+0}
wm geom .pack {}

test pack-15.1 {managing geometry with -in option} {
    pack forget .pack.a .pack.b .pack.c .pack.d
    pack .pack.a -side top
    frame .pack.f
    lower .pack.f
    pack .pack.f -side top
    frame .pack.f.f2
    lower .pack.f.f2
    pack .pack.f.f2 -side top
    pack .pack.b -in .pack.f.f2
    update
    set result [winfo geom .pack.b]
    pack unpack .pack.a
    update
    lappend result [winfo geom .pack.b]
} {50x30+0+40 50x30+0+0}
catch {destroy .pack.f}
test pack-15.2 {managing geometry with -in option} {
    pack forget .pack.a .pack.b .pack.c .pack.d
    frame .pack.f
    lower .pack.f
    pack .pack.a -in .pack.f -side top
    update
    set result [winfo ismapped .pack.a]
    place .pack.f -x 30 -y 45
    update
    lappend result [winfo ismapped .pack.a] [winfo geometry .pack.a]
    place forget .pack.f
    update
    lappend result [winfo ismapped .pack.a]
} {0 1 20x40+30+45 0}
catch {destroy .pack.f}
test pack-15.3 {managing geometry with -in option} {
    pack forget .pack.a .pack.b .pack.c .pack.d
    pack .pack.a -side top
    frame .pack.f
    lower .pack.f
    pack .pack.f -side top
    frame .pack.f.f2
    lower .pack.f.f2
    pack .pack.f.f2 -side top
    pack .pack.b -in .pack.f.f2
    update
    set result [winfo ismapped .pack.b]
    pack unpack .pack.f
    update
    lappend result [winfo ismapped .pack.b]
} {1 0}
catch {destroy .pack.f}
test pack-15.4 {managing geometry with -in option} {
    pack forget .pack.a .pack.b .pack.c .pack.d
    foreach i {1 2} {
	frame .pack.f$i -width 100 -height 40 -bd 2 -relief raised
	lower .pack.f$i
	pack propagate .pack.f$i 0
	pack .pack.f$i -side top
    }
    pack .pack.b -in .pack.f1 -side right
    update
    set result {}
    lappend result [winfo geometry .pack.b] [winfo ismapped .pack.b]
    pack .pack.b -in .pack.f2 -side bottom
    update
    lappend result [winfo geometry .pack.b] [winfo ismapped .pack.b]
    .pack.f1 configure -width 50 -height 20
    update
    lappend result [winfo geometry .pack.b] [winfo ismapped .pack.b]
    pack forget .pack.b
    update
    lappend result [winfo geometry .pack.b] [winfo ismapped .pack.b]
} {50x30+48+5 1 50x30+25+48 1 50x30+25+28 1 50x30+25+28 0}
catch {destroy .pack.f1 .pack.f2}
test pack-15.5 {managing geometry with -in option} {
    pack forget .pack.a .pack.b .pack.c .pack.d
    foreach i {1 2} {
	frame .pack.f$i -width 100 -height 20 -bd 2 -relief raised
	lower .pack.f$i
	pack propagate .pack.f$i 0
	pack .pack.f$i -side top
    }
    pack .pack.b -in .pack.f2 -side top
    update
    set result {}
    lappend result [winfo geometry .pack.b] [winfo ismapped .pack.b]
    pack .pack.a -before .pack.b -side top
    update
    lappend result [winfo geometry .pack.b] [winfo ismapped .pack.b]
} {50x16+25+22 1 50x16+25+22 0}
catch {destroy .pack.f1 .pack.f2}

test pack-16.1 {geometry manager name} {
    pack forget .pack.a .pack.b .pack.c .pack.d
    set result {}
    lappend result [winfo manager .pack.a]
    pack .pack.a
    lappend result [winfo manager .pack.a]
    pack forget .pack.a
    lappend result [winfo manager .pack.a]
} {{} pack {}}

test pack-17.1 {PackLostSlaveProc procedure} {
    pack forget .pack.a .pack.b .pack.c .pack.d
    pack .pack.a
    update
    place .pack.a -x 40 -y 10
    update
    list [winfo manager .pack.a] [winfo geometry .pack.a] \
	[catch {pack info .pack.a} msg] $msg
} {place 20x40+40+10 1 {window ".pack.a" isn't packed}}

test pack-18.1 {unmap slaves when master unmapped} {tempNotPc} {

    # adjust the position of .pack before test to avoid a screen switch
    # that occurs with window managers that have desktops four times as big
    # as the screen (screen switch causes scale and other tests to fail).

    wm geometry .pack +100+100

    # On the PC, when the width/height is configured while the window is 
    # unmapped, the changes don't take effect until the window is remapped.
    # Who knows why?

    eval destroy [winfo child .pack]
    frame .pack.a -width 100 -height 50 -relief raised -bd 2
    pack .pack.a
    update
    set result [winfo ismapped .pack.a]
    wm iconify .pack
    update
    lappend result [winfo ismapped .pack.a]
    .pack.a configure -width 200 -height 75
    update
    lappend result [winfo width .pack.a ] [winfo height .pack.a] \
	[winfo ismapped .pack.a]
    wm deiconify .pack
    update
    lappend result [winfo ismapped .pack.a]
} {1 0 200 75 0 1}
test pack-18.2 {unmap slaves when master unmapped} {

    # adjust the position of .pack before test to avoid a screen switch
    # that occurs with window managers that have desktops four times as big
    # as the screen (screen switch causes scale and other tests to fail).

    wm geometry .pack +100+100
    eval destroy [winfo child .pack]
    frame .pack.a -relief raised -bd 2
    frame .pack.b -width 70 -height 30 -relief sunken -bd 2
    pack .pack.a
    pack .pack.b -in .pack.a
    update
    set result [winfo ismapped .pack.b]
    wm iconify .pack
    update
    lappend result [winfo ismapped .pack.b]
    .pack.b configure -width 100 -height 30
    update
    lappend result [winfo width .pack.b ] [winfo height .pack.b] \
	[winfo ismapped .pack.b]
    wm deiconify .pack
    update
    lappend result [winfo ismapped .pack.b]
} {1 0 100 30 0 1}

test pack-19.1 {test respect for internalborder} {
    catch {eval pack forget [pack slaves .pack]}
    destroy .pack.l .pack.lf
    wm geometry .pack 200x200
    frame .pack.l -width 15 -height 10
    labelframe .pack.lf -labelwidget .pack.l
    pack .pack.lf -fill both -expand 1
    frame .pack.lf.f
    pack .pack.lf.f -fill both -expand 1
    update
    set res [list [winfo geometry .pack.lf.f]]
    .pack.lf configure -labelanchor e -padx 3 -pady 5
    update
    lappend res [winfo geometry .pack.lf.f]
    destroy .pack.l .pack.lf
    set res
} {196x188+2+10 177x186+5+7}
test pack-19.2 {test support for minreqsize} {
    catch {eval pack forget [pack slaves .pack]}
    destroy .pack.l .pack.lf
    wm geometry .pack {}
    frame .pack.l -width 150 -height 100
    labelframe .pack.lf -labelwidget .pack.l
    pack .pack.lf -fill both -expand 1
    frame .pack.lf.f -width 20 -height 25
    pack .pack.lf.f
    update
    set res [list [winfo geometry .pack.lf]]
    .pack.lf configure -labelanchor ws
    update
    lappend res [winfo geometry .pack.lf]
    destroy .pack.l .pack.lf
    set res
} {162x127+0+0 172x112+0+0}

destroy .pack
foreach i {pack1 pack2 pack3 pack4} {
    rename $i {}
}

# cleanup
cleanupTests
return
