TDBC

Check-in [8a460b3726]
Login

Many hyperlinks are disabled.
Use anonymous login to enable hyperlinks.

Overview
Comment:Make sure that tdbc_LIB_DIR is always a canonical absolute path. Improve formatting in Makefile.in, adapted from latest sampleextension.
Downloads: Tarball | ZIP archive
Timelines: family | ancestors | descendants | both | trunk
Files: files | file ages | folders
SHA1: 8a460b37260c1a98dac8d0cced8daebafde0ff42
User & Date: jan.nijtmans 2015-06-15 10:09:11.218
References
2015-06-26
22:13 Review ticket [68607299f7]: tdbc_LIB_DIR not being substituted properly in tdbcConfig.sh plus 4 other changes artifact: e396bc913d user: jan.nijtmans
2015-06-23
20:11 New ticket [625f0ee464] Disable writing to build-dir at install time. artifact: fb9d952f2a user: erikleunissen
Context
2015-06-26
13:01
Make stub table pointer a 'const'ant, because Tcl_LoadFile is the only function that is allowed to fill the table. check-in: b8fd487e3f user: jan.nijtmans tags: trunk
2015-06-15
10:09
Make sure that tdbc_LIB_DIR is always a canonical absolute path. Improve formatting in Makefile.in, adapted from latest sampleextension. check-in: 8a460b3726 user: jan.nijtmans tags: trunk
2015-05-08
14:17
repair check-in: 8e963150b5 user: dgp tags: trunk
Changes
Unified Diff Ignore Whitespace Patch
Changes to Makefile.in.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
# Makefile.in --
#
#	This file is a Makefile for Sample TEA Extension.  If it has the name
#	"Makefile.in" then it is a template for a Makefile;  to generate the
#	actual Makefile, run "./configure", which is a configuration script
#	generated by the "autoconf" program (constructs like "@foo@" will get
#	replaced in the actual Makefile.
#
# Copyright (c) 1999 Scriptics Corporation.
# Copyright (c) 2002-2005 ActiveState Corporation.
#
# See the file "license.terms" for information on usage and redistribution
# of this file, and for a DISCLAIMER OF ALL WARRANTIES.
#
# RCS: @(#) $Id$

#========================================================================
# Add additional lines to handle any additional AC_SUBST cases that
# have been added in a customized configure script.
#========================================================================

#SAMPLE_NEW_VAR	= @SAMPLE_NEW_VAR@













<
<







1
2
3
4
5
6
7
8
9
10
11
12
13


14
15
16
17
18
19
20
# Makefile.in --
#
#	This file is a Makefile for Sample TEA Extension.  If it has the name
#	"Makefile.in" then it is a template for a Makefile;  to generate the
#	actual Makefile, run "./configure", which is a configuration script
#	generated by the "autoconf" program (constructs like "@foo@" will get
#	replaced in the actual Makefile.
#
# Copyright (c) 1999 Scriptics Corporation.
# Copyright (c) 2002-2005 ActiveState Corporation.
#
# See the file "license.terms" for information on usage and redistribution
# of this file, and for a DISCLAIMER OF ALL WARRANTIES.



#========================================================================
# Add additional lines to handle any additional AC_SUBST cases that
# have been added in a customized configure script.
#========================================================================

#SAMPLE_NEW_VAR	= @SAMPLE_NEW_VAR@
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
srcdir		= @srcdir@
prefix		= @prefix@
exec_prefix	= @exec_prefix@

bindir		= @bindir@
libdir		= @libdir@
includedir	= @includedir@
datarootdir     = @datarootdir@
datadir		= @datadir@
mandir		= @mandir@

DESTDIR		=

PKG_DIR		= $(PACKAGE_NAME)$(PACKAGE_VERSION)
pkgdatadir	= $(datadir)/$(PKG_DIR)
pkglibdir	= $(libdir)/$(PKG_DIR)
pkgincludedir	= $(includedir)/$(PKG_DIR)

top_builddir	= .

INSTALL_OPTIONS =
INSTALL         = $(SHELL) $(srcdir)/tclconfig/install-sh -c ${INSTALL_OPTIONS}
INSTALL_DATA_DIR = ${INSTALL} -d -m 755
INSTALL_PROGRAM = ${INSTALL} -m 755
INSTALL_DATA    = ${INSTALL} -m 444
INSTALL_SCRIPT  = ${INSTALL_PROGRAM}
INSTALL_LIBRARY = ${INSTALL_DATA}

PACKAGE_NAME	= @PACKAGE_NAME@
PACKAGE_VERSION	= @PACKAGE_VERSION@
CC		= @CC@
CFLAGS_DEFAULT	= @CFLAGS_DEFAULT@
CFLAGS_WARNING	= @CFLAGS_WARNING@
EXEEXT		= @EXEEXT@







|












|
|
|
|
|
|
|







68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
srcdir		= @srcdir@
prefix		= @prefix@
exec_prefix	= @exec_prefix@

bindir		= @bindir@
libdir		= @libdir@
includedir	= @includedir@
datarootdir	= @datarootdir@
datadir		= @datadir@
mandir		= @mandir@

DESTDIR		=

PKG_DIR		= $(PACKAGE_NAME)$(PACKAGE_VERSION)
pkgdatadir	= $(datadir)/$(PKG_DIR)
pkglibdir	= $(libdir)/$(PKG_DIR)
pkgincludedir	= $(includedir)/$(PKG_DIR)

top_builddir	= .

INSTALL_OPTIONS	=
INSTALL		= @INSTALL@ ${INSTALL_OPTIONS}
INSTALL_DATA_DIR = @INSTALL_DATA_DIR@
INSTALL_DATA	= @INSTALL_DATA@
INSTALL_PROGRAM	= @INSTALL_PROGRAM@
INSTALL_SCRIPT	= @INSTALL_SCRIPT@
INSTALL_LIBRARY	= @INSTALL_LIBRARY@

PACKAGE_NAME	= @PACKAGE_NAME@
PACKAGE_VERSION	= @PACKAGE_VERSION@
CC		= @CC@
CFLAGS_DEFAULT	= @CFLAGS_DEFAULT@
CFLAGS_WARNING	= @CFLAGS_WARNING@
EXEEXT		= @EXEEXT@
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171


172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
EXTRA_PATH	= $(top_builddir):$(TCL_BIN_DIR)
#EXTRA_PATH	= $(top_builddir):$(TCL_BIN_DIR):$(TK_BIN_DIR)
TCLLIBPATH	= $(top_builddir)
TCLSH_ENV	= TCL_LIBRARY=`@CYGPATH@ $(TCL_SRC_DIR)/library`
PKG_ENV		= @LD_LIBRARY_PATH_VAR@="$(EXTRA_PATH):$(@LD_LIBRARY_PATH_VAR@)" \
		  PATH="$(EXTRA_PATH):$(PATH)" \
		  TCLLIBPATH="$(TCLLIBPATH)" \
                  TDBC_LIBRARY=`@CYGPATH@ $(srcdir)/library` 

TCLSH_PROG	= @TCLSH_PROG@
TCLSH   	= $(PKG_ENV) $(TCLSH_ENV) $(TCLSH_PROG)

#WISH_ENV	= TK_LIBRARY=`@CYGPATH@ $(TK_SRC_DIR)/library`
#WISH_PROG	= @WISH_PROG@
#WISH   	= $(PKG_ENV) $(TCLSH_ENV) $(WISH_ENV) $(WISH_PROG)

SHARED_BUILD	= @SHARED_BUILD@

INCLUDES	= @PKG_INCLUDES@ @TCL_INCLUDES@
#INCLUDES	= @PKG_INCLUDES@ @TCL_INCLUDES@ @TK_INCLUDES@ @TK_XINCLUDES@

PKG_CFLAGS	= @PKG_CFLAGS@

# TCL_DEFS is not strictly need here, but if you remove it, then you
# must make sure that configure.ac checks for the necessary components
# that your library may use.  TCL_DEFS can actually be a problem if
# you do not compile with a similar machine setup as the Tcl core was
# compiled with.
#DEFS		= $(TCL_DEFS) @DEFS@ $(PKG_CFLAGS)
DEFS		= @DEFS@ $(PKG_CFLAGS)

# Move pkgIndex.tcl to 'BINARIES' var if it is generated in the Makefile
CONFIGURE_OUTPUTS = @CONFIGURE_OUTPUTS@
CLEANFILES	= @CLEANFILES@

CPPFLAGS	= @CPPFLAGS@
LIBS		= @PKG_LIBS@ @LIBS@
AR		= @AR@
CFLAGS		= @CFLAGS@
COMPILE		= $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)



#========================================================================
# Start of user-definable TARGETS section
#========================================================================

#========================================================================
# TEA TARGETS.  Please note that the "libraries:" target refers to platform
# independent files, and the "binaries:" target inclues executable programs and
# platform-dependent libraries.  Modify these targets so that they install
# the various pieces of your package.  The make and install rules
# for the BINARIES that you specified above have already been done.
#========================================================================

all: binaries libraries doc








|


|



|

















|







>
>







|







130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
EXTRA_PATH	= $(top_builddir):$(TCL_BIN_DIR)
#EXTRA_PATH	= $(top_builddir):$(TCL_BIN_DIR):$(TK_BIN_DIR)
TCLLIBPATH	= $(top_builddir)
TCLSH_ENV	= TCL_LIBRARY=`@CYGPATH@ $(TCL_SRC_DIR)/library`
PKG_ENV		= @LD_LIBRARY_PATH_VAR@="$(EXTRA_PATH):$(@LD_LIBRARY_PATH_VAR@)" \
		  PATH="$(EXTRA_PATH):$(PATH)" \
		  TCLLIBPATH="$(TCLLIBPATH)" \
		  TDBC_LIBRARY=`@CYGPATH@ $(srcdir)/library` 

TCLSH_PROG	= @TCLSH_PROG@
TCLSH		= $(PKG_ENV) $(TCLSH_ENV) $(TCLSH_PROG)

#WISH_ENV	= TK_LIBRARY=`@CYGPATH@ $(TK_SRC_DIR)/library`
#WISH_PROG	= @WISH_PROG@
#WISH		= $(PKG_ENV) $(TCLSH_ENV) $(WISH_ENV) $(WISH_PROG)

SHARED_BUILD	= @SHARED_BUILD@

INCLUDES	= @PKG_INCLUDES@ @TCL_INCLUDES@
#INCLUDES	= @PKG_INCLUDES@ @TCL_INCLUDES@ @TK_INCLUDES@ @TK_XINCLUDES@

PKG_CFLAGS	= @PKG_CFLAGS@

# TCL_DEFS is not strictly need here, but if you remove it, then you
# must make sure that configure.ac checks for the necessary components
# that your library may use.  TCL_DEFS can actually be a problem if
# you do not compile with a similar machine setup as the Tcl core was
# compiled with.
#DEFS		= $(TCL_DEFS) @DEFS@ $(PKG_CFLAGS)
DEFS		= @DEFS@ $(PKG_CFLAGS)

# Move pkgIndex.tcl to 'BINARIES' var if it is generated in the Makefile
CONFIG_CLEAN_FILES = Makefile pkgIndex.tcl
CLEANFILES	= @CLEANFILES@

CPPFLAGS	= @CPPFLAGS@
LIBS		= @PKG_LIBS@ @LIBS@
AR		= @AR@
CFLAGS		= @CFLAGS@
COMPILE		= $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)

.SUFFIXES: .c .$(OBJEXT)

#========================================================================
# Start of user-definable TARGETS section
#========================================================================

#========================================================================
# TEA TARGETS.  Please note that the "libraries:" target refers to platform
# independent files, and the "binaries:" target includes executable programs and
# platform-dependent libraries.  Modify these targets so that they install
# the various pieces of your package.  The make and install rules
# for the BINARIES that you specified above have already been done.
#========================================================================

all: binaries libraries doc

247
248
249
250
251
252
253










254
255
256
257
258
259
260

shell: binaries libraries
	@$(TCLSH) $(SCRIPT)

gdb:
	$(TCLSH_ENV) gdb $(TCLSH_PROG) $(SCRIPT)











depend:

#========================================================================
# $(PKG_LIB_FILE) should be listed as part of the BINARIES variable
# mentioned above.  That will ensure that this target is built when you
# run "make binaries".
#







>
>
>
>
>
>
>
>
>
>







247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270

shell: binaries libraries
	@$(TCLSH) $(SCRIPT)

gdb:
	$(TCLSH_ENV) gdb $(TCLSH_PROG) $(SCRIPT)

VALGRINDARGS =	--tool=memcheck --num-callers=8 --leak-resolution=high \
		--leak-check=yes --show-reachable=yes -v

valgrind: binaries libraries
	$(TCLSH_ENV) valgrind $(VALGRINDARGS) $(TCLSH_PROG) \
		`@CYGPATH@ $(srcdir)/tests/all.tcl` $(TESTFLAGS)

valgrindshell: binaries libraries
	$(TCLSH_ENV) valgrind $(VALGRINDARGS) $(TCLSH_PROG) $(SCRIPT)

depend:

#========================================================================
# $(PKG_LIB_FILE) should be listed as part of the BINARIES variable
# mentioned above.  That will ensure that this target is built when you
# run "make binaries".
#
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300

301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
# 	$(COMPILE) -c `@CYGPATH@ $(srcdir)/generic/sample.c` -o $@
#
# Setting the VPATH variable to a list of paths will cause the makefile
# to look into these paths when resolving .c to .obj dependencies.
# As necessary, add $(srcdir):$(srcdir)/compat:....
#========================================================================

VPATH = $(srcdir):$(srcdir)/generic:$(srcdir)/unix:$(srcdir)/win

.c.@OBJEXT@:
	$(COMPILE) -c `@CYGPATH@ $<` -o $@

#========================================================================
# Distribution creation
# You may need to tweak this target to make it work correctly.
#========================================================================


COMPRESS	= tar zcvf $(PKG_DIR).tar.gz $(PKG_DIR)
DIST_ROOT	= /tmp/dist
DIST_DIR	= $(DIST_ROOT)/$(PKG_DIR)

dist-clean:
	rm -rf $(DIST_DIR) $(DIST_ROOT)/$(PKG_DIR).tar.*

dist: dist-clean
	mkdir -p $(DIST_DIR)
	cp -p $(srcdir)/ChangeLog $(srcdir)/README* $(srcdir)/license* \
		$(srcdir)/aclocal.m4 $(srcdir)/configure $(srcdir)/*.in \
		$(srcdir)/configure.ac $(DIST_DIR)/
	chmod 664 $(DIST_DIR)/Makefile.in $(DIST_DIR)/aclocal.m4
	chmod 775 $(DIST_DIR)/configure $(DIST_DIR)/configure.ac

	for i in $(srcdir)/*.[ch]; do \
	    if [ -f $$i ]; then \
		cp -p $$i $(DIST_DIR)/ ; \
	    fi; \
	done;

	mkdir $(DIST_DIR)/tclconfig
	cp -p $(srcdir)/tclconfig/install-sh $(srcdir)/tclconfig/tcl.m4 \
		$(srcdir)/tclconfig/ChangeLog $(srcdir)/tclconfig/README.txt \
		$(DIST_DIR)/tclconfig/
	chmod 664 $(DIST_DIR)/tclconfig/tcl.m4
	chmod +x $(DIST_DIR)/tclconfig/install-sh

	mkdir $(DIST_DIR)/doc







|









>








|












|







294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
# 	$(COMPILE) -c `@CYGPATH@ $(srcdir)/generic/sample.c` -o $@
#
# Setting the VPATH variable to a list of paths will cause the makefile
# to look into these paths when resolving .c to .obj dependencies.
# As necessary, add $(srcdir):$(srcdir)/compat:....
#========================================================================

VPATH = $(srcdir):$(srcdir)/generic:$(srcdir)/unix:$(srcdir)/win:$(srcdir)/macosx

.c.@OBJEXT@:
	$(COMPILE) -c `@CYGPATH@ $<` -o $@

#========================================================================
# Distribution creation
# You may need to tweak this target to make it work correctly.
#========================================================================

#COMPRESS	= tar cvf $(PKG_DIR).tar $(PKG_DIR); compress $(PKG_DIR).tar
COMPRESS	= tar zcvf $(PKG_DIR).tar.gz $(PKG_DIR)
DIST_ROOT	= /tmp/dist
DIST_DIR	= $(DIST_ROOT)/$(PKG_DIR)

dist-clean:
	rm -rf $(DIST_DIR) $(DIST_ROOT)/$(PKG_DIR).tar.*

dist: dist-clean
	$(INSTALL_DATA_DIR) $(DIST_DIR)
	cp -p $(srcdir)/ChangeLog $(srcdir)/README* $(srcdir)/license* \
		$(srcdir)/aclocal.m4 $(srcdir)/configure $(srcdir)/*.in \
		$(srcdir)/configure.ac $(DIST_DIR)/
	chmod 664 $(DIST_DIR)/Makefile.in $(DIST_DIR)/aclocal.m4
	chmod 775 $(DIST_DIR)/configure $(DIST_DIR)/configure.ac

	for i in $(srcdir)/*.[ch]; do \
	    if [ -f $$i ]; then \
		cp -p $$i $(DIST_DIR)/ ; \
	    fi; \
	done;

	$(INSTALL_DATA_DIR) $(DIST_DIR)/tclconfig
	cp -p $(srcdir)/tclconfig/install-sh $(srcdir)/tclconfig/tcl.m4 \
		$(srcdir)/tclconfig/ChangeLog $(srcdir)/tclconfig/README.txt \
		$(DIST_DIR)/tclconfig/
	chmod 664 $(DIST_DIR)/tclconfig/tcl.m4
	chmod +x $(DIST_DIR)/tclconfig/install-sh

	mkdir $(DIST_DIR)/doc
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392

393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
#========================================================================

#========================================================================
# Don't modify the file to clean here.  Instead, set the "CLEANFILES"
# variable in configure.ac
#========================================================================

clean:  
	-test -z "$(BINARIES)" || rm -f $(BINARIES)
	-rm -f *.$(OBJEXT) core *.core
	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
	-rm -f tdbc.tcl

distclean: clean
	-rm -f *.tab.c
	-rm -f $(CONFIGURE_OUTPUTS)


#========================================================================
# Install binary object libraries.  On Windows this includes both .dll and
# .lib files.  Because the .lib files are not explicitly listed anywhere,
# we need to deduce their existence from the .dll file of the same name.
# Library files go into the lib directory.
# In addition, this will generate the pkgIndex.tcl
# file in the install location (assuming it can find a usable tclsh shell)
#
# You should not have to modify this target.
#========================================================================

install-lib-binaries: binaries
	@$(INSTALL_DATA_DIR) $(DESTDIR)$(pkglibdir)
	@list='$(lib_BINARIES)'; for p in $$list; do \
	  if test -f $$p; then \
	    echo " $(INSTALL_PROGRAM) $$p $(DESTDIR)$(pkglibdir)/$$p"; \
	    $(INSTALL_PROGRAM) $$p $(DESTDIR)$(pkglibdir)/$$p; \
	    stub=`echo $$p|sed -e "s/.*\(stub\).*/\1/"`; \
	    if test "x$$stub" = "xstub"; then \
		echo " $(RANLIB_STUB) $(DESTDIR)$(pkglibdir)/$$p"; \
		$(RANLIB_STUB) $(DESTDIR)$(pkglibdir)/$$p; \
	    else \
		echo " $(RANLIB) $(DESTDIR)$(pkglibdir)/$$p"; \
		$(RANLIB) $(DESTDIR)$(pkglibdir)/$$p; \







|







|
>
















|
|







388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
#========================================================================

#========================================================================
# Don't modify the file to clean here.  Instead, set the "CLEANFILES"
# variable in configure.ac
#========================================================================

clean:
	-test -z "$(BINARIES)" || rm -f $(BINARIES)
	-rm -f *.$(OBJEXT) core *.core
	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
	-rm -f tdbc.tcl

distclean: clean
	-rm -f *.tab.c
	-rm -f $(CONFIG_CLEAN_FILES)
	-rm -f config.cache config.log config.status

#========================================================================
# Install binary object libraries.  On Windows this includes both .dll and
# .lib files.  Because the .lib files are not explicitly listed anywhere,
# we need to deduce their existence from the .dll file of the same name.
# Library files go into the lib directory.
# In addition, this will generate the pkgIndex.tcl
# file in the install location (assuming it can find a usable tclsh shell)
#
# You should not have to modify this target.
#========================================================================

install-lib-binaries: binaries
	@$(INSTALL_DATA_DIR) $(DESTDIR)$(pkglibdir)
	@list='$(lib_BINARIES)'; for p in $$list; do \
	  if test -f $$p; then \
	    echo " $(INSTALL_LIBRARY) $$p $(DESTDIR)$(pkglibdir)/$$p"; \
	    $(INSTALL_LIBRARY) $$p $(DESTDIR)$(pkglibdir)/$$p; \
	    stub=`echo $$p|sed -e "s/.*\(stub\).*/\1/"`; \
	    if test "x$$stub" = "xstub"; then \
		echo " $(RANLIB_STUB) $(DESTDIR)$(pkglibdir)/$$p"; \
		$(RANLIB_STUB) $(DESTDIR)$(pkglibdir)/$$p; \
	    else \
		echo " $(RANLIB) $(DESTDIR)$(pkglibdir)/$$p"; \
		$(RANLIB) $(DESTDIR)$(pkglibdir)/$$p; \
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
	@list='$(bin_BINARIES)'; for p in $$list; do \
	  if test -f $$p; then \
	    echo " $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/$$p"; \
	    $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/$$p; \
	  fi; \
	done

.SUFFIXES: .c .$(OBJEXT)

Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
	cd $(top_builddir) \
	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status

uninstall-binaries:
	list='$(lib_BINARIES)'; for p in $$list; do \
	  rm -f $(DESTDIR)$(pkglibdir)/$$p; \







<
<







466
467
468
469
470
471
472


473
474
475
476
477
478
479
	@list='$(bin_BINARIES)'; for p in $$list; do \
	  if test -f $$p; then \
	    echo " $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/$$p"; \
	    $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/$$p; \
	  fi; \
	done



Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
	cd $(top_builddir) \
	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status

uninstall-binaries:
	list='$(lib_BINARIES)'; for p in $$list; do \
	  rm -f $(DESTDIR)$(pkglibdir)/$$p; \
Changes to configure.
5729
5730
5731
5732
5733
5734
5735
5736
5737
5738
5739
5740
5741
5742
5743
5744
5745
5746
5747
5748
	fi
	PKG_TCL_SOURCES="$PKG_TCL_SOURCES $i"
    done



#--------------------------------------------------------------------
# A few miscellaneous platform-specific items:
#
# Define a special symbol for Windows (BUILD_sample in this case) so
# that we create the export library with the dll.
#
# Windows creates a few extra files that need to be cleaned up.
# You can add more files to clean if your extension creates any extra
# files by extending CLEANFILES.
# Add pkgIndex.tcl if it is generated in the Makefile instead of ./configure
# and change Makefile.in to move it from CONFIG_CLEAN_FILES to BINARIES var.
#
# A few miscellaneous platform-specific items:
# TEA_ADD_* any platform specific compiler/build info here.







<

<
<
<
<







5729
5730
5731
5732
5733
5734
5735

5736




5737
5738
5739
5740
5741
5742
5743
	fi
	PKG_TCL_SOURCES="$PKG_TCL_SOURCES $i"
    done



#--------------------------------------------------------------------

#




# You can add more files to clean if your extension creates any extra
# files by extending CLEANFILES.
# Add pkgIndex.tcl if it is generated in the Makefile instead of ./configure
# and change Makefile.in to move it from CONFIG_CLEAN_FILES to BINARIES var.
#
# A few miscellaneous platform-specific items:
# TEA_ADD_* any platform specific compiler/build info here.
8937
8938
8939
8940
8941
8942
8943
8944

8945
8946
8947
8948
8949
8950
8951


    eval "tdbc_BUILD_INCLUDE_SPEC=\"-I`${CYGPATH} ${tdbc_SRC_DIR}/generic`\""


# Develop a fully qualified path for where .tcl files for the tdbc package
# appear at run time.
tdbc_LIB_DIR="${libdir}/${PACKAGE_NAME}${PACKAGE_VERSION}"



# Make the export configuration for the TDBC package


    #--------------------------------------------------------------------
    # These are for tdbcConfig.sh







|
>







8932
8933
8934
8935
8936
8937
8938
8939
8940
8941
8942
8943
8944
8945
8946
8947


    eval "tdbc_BUILD_INCLUDE_SPEC=\"-I`${CYGPATH} ${tdbc_SRC_DIR}/generic`\""


# Develop a fully qualified path for where .tcl files for the tdbc package
# appear at run time.
eval tdbc_LIB_DIR="${libdir}/${PACKAGE_NAME}${PACKAGE_VERSION}"
tdbc_LIB_DIR=`cd "${tdbc_LIB_DIR}"; pwd`


# Make the export configuration for the TDBC package


    #--------------------------------------------------------------------
    # These are for tdbcConfig.sh
Changes to configure.ac.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
#!/bin/bash -norc
dnl	This file is an input file used by the GNU "autoconf" program to
dnl	generate the file "configure", which is run during Tcl installation
dnl	to configure the system for the local environment.

#-----------------------------------------------------------------------
# Set your package name and version numbers here.
#
# This initializes the environment with PACKAGE_NAME and PACKAGE_VERSION
# set as provided.  These will also be added as -D defs in your Makefile
# so you can encode the package version directly into the source files.
# This will also define a special symbol for Windows (BUILD_<PACKAGE_NAME>
# so that we create the export library with the dll.
#-----------------------------------------------------------------------

AC_INIT([tdbc], [1.0.3])

#--------------------------------------------------------------------
# Call TEA_INIT as the first TEA_ macro to set up initial vars.
# This will define a ${TEA_PLATFORM} variable == "unix" or "windows"











<
<







1
2
3
4
5
6
7
8
9
10
11


12
13
14
15
16
17
18
#!/bin/bash -norc
dnl	This file is an input file used by the GNU "autoconf" program to
dnl	generate the file "configure", which is run during Tcl installation
dnl	to configure the system for the local environment.

#-----------------------------------------------------------------------
# Set your package name and version numbers here.
#
# This initializes the environment with PACKAGE_NAME and PACKAGE_VERSION
# set as provided.  These will also be added as -D defs in your Makefile
# so you can encode the package version directly into the source files.


#-----------------------------------------------------------------------

AC_INIT([tdbc], [1.0.3])

#--------------------------------------------------------------------
# Call TEA_INIT as the first TEA_ macro to set up initial vars.
# This will define a ${TEA_PLATFORM} variable == "unix" or "windows"
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
  fi
fi
TEA_ADD_CFLAGS([${TCLOO_CFLAGS}])
TEA_ADD_STUB_SOURCES([tdbcStubLib.c])
TEA_ADD_TCL_SOURCES([library/tdbc.tcl])

#--------------------------------------------------------------------
# A few miscellaneous platform-specific items:
#
# Define a special symbol for Windows (BUILD_sample in this case) so
# that we create the export library with the dll.
#
# Windows creates a few extra files that need to be cleaned up.
# You can add more files to clean if your extension creates any extra
# files by extending CLEANFILES.
# Add pkgIndex.tcl if it is generated in the Makefile instead of ./configure
# and change Makefile.in to move it from CONFIG_CLEAN_FILES to BINARIES var.
#
# A few miscellaneous platform-specific items:
# TEA_ADD_* any platform specific compiler/build info here.







<

<
<
<
<







98
99
100
101
102
103
104

105




106
107
108
109
110
111
112
  fi
fi
TEA_ADD_CFLAGS([${TCLOO_CFLAGS}])
TEA_ADD_STUB_SOURCES([tdbcStubLib.c])
TEA_ADD_TCL_SOURCES([library/tdbc.tcl])

#--------------------------------------------------------------------

#




# You can add more files to clean if your extension creates any extra
# files by extending CLEANFILES.
# Add pkgIndex.tcl if it is generated in the Makefile instead of ./configure
# and change Makefile.in to move it from CONFIG_CLEAN_FILES to BINARIES var.
#
# A few miscellaneous platform-specific items:
# TEA_ADD_* any platform specific compiler/build info here.
200
201
202
203
204
205
206
207

208
209
210
211
212
213
214
215
216
217
# Develop -I specifications for the build and installed directories where
# tdbc.h may be found.
TEAX_INCLUDE_LINE(tdbc_INCLUDE_SPEC, [${includedir}])
TEAX_INCLUDE_LINE(tdbc_BUILD_INCLUDE_SPEC, [${tdbc_SRC_DIR}/generic])

# Develop a fully qualified path for where .tcl files for the tdbc package
# appear at run time.
tdbc_LIB_DIR="${libdir}/${PACKAGE_NAME}${PACKAGE_VERSION}"

AC_SUBST(tdbc_LIB_DIR)

# Make the export configuration for the TDBC package

TEA_EXPORT_CONFIG([tdbc])

# Set up to produce Makefile from Makefile.in and tdbcConfig.sh from
# tdbcConfig.sh.in.

AC_OUTPUT([Makefile pkgIndex.tcl tdbcConfig.sh])







|
>










193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
# Develop -I specifications for the build and installed directories where
# tdbc.h may be found.
TEAX_INCLUDE_LINE(tdbc_INCLUDE_SPEC, [${includedir}])
TEAX_INCLUDE_LINE(tdbc_BUILD_INCLUDE_SPEC, [${tdbc_SRC_DIR}/generic])

# Develop a fully qualified path for where .tcl files for the tdbc package
# appear at run time.
eval tdbc_LIB_DIR="${libdir}/${PACKAGE_NAME}${PACKAGE_VERSION}"
tdbc_LIB_DIR=`cd "${tdbc_LIB_DIR}"; pwd`
AC_SUBST(tdbc_LIB_DIR)

# Make the export configuration for the TDBC package

TEA_EXPORT_CONFIG([tdbc])

# Set up to produce Makefile from Makefile.in and tdbcConfig.sh from
# tdbcConfig.sh.in.

AC_OUTPUT([Makefile pkgIndex.tcl tdbcConfig.sh])