ADDED .fossil-settings/ignore-glob Index: .fossil-settings/ignore-glob ================================================================== --- /dev/null +++ .fossil-settings/ignore-glob @@ -0,0 +1,19 @@ +aclocal.m4 +autom4te.cache +configure +config.guess +config.log +config.sub +install-sh +Makefile +config.status +pkgIndex.tcl +tcltls.so +tcltls.a +tls.o +tlsBIO.o +tlsIO.o +tlsX509.o +tls.tcl.h +build/work +dh_params.h ADDED HEADER Index: HEADER ================================================================== --- /dev/null +++ HEADER @@ -0,0 +1,5 @@ +TclTLS @@VERS@@ +========== + +Release Date: @@DATE@@ + Index: Makefile.in ================================================================== --- Makefile.in +++ Makefile.in @@ -1,413 +1,74 @@ -# Makefile.in -- -# -# This file is a Makefile for the tls Tcl extension. If it has the name -# "Makefile.in" then it is a template for a Makefile; to generate the -# actual Makefile, run "./configure", which is a configuration script -# generated by the "autoconf" program (constructs like "@foo@" will get -# replaced in the actual Makefile. -# -# Copyright (c) 1999-2000 Ajuba Solutions. -# All rights reserved. -# -# See the file "license.terms" for information on usage and redistribution -# of this file, and for a DISCLAIMER OF ALL WARRANTIES. -# -# RCS: @(#) $Id: Makefile.in,v 1.29 2010/08/12 01:28:06 hobbs2 Exp $ - - -#======================================================================== -# Enumerate the names of the source files included in this package. -# This will be used when a dist target is added to the Makefile. -#======================================================================== - -PKG_SOURCES = tls.c tlsIO.c tlsBIO.c tlsX509.c fixstrtod.c -PKG_OBJECTS = tls.$(OBJEXT) tlsIO.$(OBJEXT) tlsBIO.$(OBJEXT) \ - tlsX509.$(OBJEXT) fixstrtod.$(OBJEXT) - -#======================================================================== -# RUNTIME_SOURCES identifies Tcl runtime files that are associated with -# this package that need to be installed, if any. -#======================================================================== - -PKG_TCL_SOURCES = tls.tcl - -#======================================================================== -# This is a list of header files to be installed -#======================================================================== - -PKG_HEADERS = tls.h - -#======================================================================== -# Variables and AC_SUBST cases added for tls. -#======================================================================== - -SSL_DIR = @SSL_DIR@ -SSL_LIB_DIR = @SSL_LIB_DIR@ -SSL_INCLUDE_DIR = @SSL_INCLUDE_DIR@ -SSL_INCLUDE_DIR_NATIVE = @SSL_INCLUDE_DIR_NATIVE@ -SSL_INCLUDES = -I$(SSL_INCLUDE_DIR_NATIVE) - -#======================================================================== -# "PKG_LIB_FILE" refers to the library (dynamic or static as per -# configuration options) composed of the named objects. -#======================================================================== - -PKG_LIB_FILE = @PKG_LIB_FILE@ -PKG_STUB_LIB_FILE = @PKG_STUB_LIB_FILE@ - -lib_BINARIES = $(PKG_LIB_FILE) -BINARIES = $(lib_BINARIES) - -SHELL = @SHELL@ - -srcdir = @srcdir@ -prefix = @prefix@ -exec_prefix = @exec_prefix@ - -bindir = @bindir@ -libdir = @libdir@ -datadir = @datadir@ -mandir = @mandir@ -includedir = @includedir@ - -DESTDIR = - -PKG_DIR = $(PACKAGE_NAME)$(PACKAGE_VERSION) -pkgdatadir = $(datadir)/$(PKG_DIR) -pkglibdir = $(libdir)/$(PKG_DIR) -pkgincludedir = $(includedir)/$(PKG_DIR) - -top_builddir = . - -INSTALL = @INSTALL@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ - -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -CC = @CC@ -CFLAGS_DEFAULT = @CFLAGS_DEFAULT@ -CFLAGS_WARNING = @CFLAGS_WARNING@ -CLEANFILES = @CLEANFILES@ -EXEEXT = @EXEEXT@ -LDFLAGS_DEFAULT = @LDFLAGS_DEFAULT@ -MAKE_LIB = @MAKE_LIB@ -MAKE_SHARED_LIB = @MAKE_SHARED_LIB@ -MAKE_STATIC_LIB = @MAKE_STATIC_LIB@ -MAKE_STUB_LIB = @MAKE_STUB_LIB@ -OBJEXT = @OBJEXT@ -RANLIB = @RANLIB@ -RANLIB_STUB = @RANLIB_STUB@ -SHLIB_CFLAGS = @SHLIB_CFLAGS@ -SHLIB_LD = @SHLIB_LD@ -SHLIB_LD_LIBS = @SHLIB_LD_LIBS@ -STLIB_LD = @STLIB_LD@ -TCL_DEFS = @TCL_DEFS@ -TCL_BIN_DIR = @TCL_BIN_DIR@ -TCL_SRC_DIR = @TCL_SRC_DIR@ -# This is necessary for packages that use private Tcl headers -#TCL_TOP_DIR_NATIVE = @TCL_TOP_DIR_NATIVE@ -# Not used, but retained for reference of what libs Tcl required -TCL_LIBS = @TCL_LIBS@ - -#======================================================================== -# TCLLIBPATH seeds the auto_path in Tcl's init.tcl so we can test our -# package without installing. The other environment variables allow us -# to test against an uninstalled Tcl. Add special env vars that you -# require for testing here (like TCLX_LIBRARY). -#======================================================================== - -EXTRA_PATH = $(top_builddir):$(TCL_BIN_DIR) -TCLSH_ENV = TCL_LIBRARY=`@CYGPATH@ $(TCL_SRC_DIR)/library` \ - @LD_LIBRARY_PATH_VAR@="$(EXTRA_PATH):$(@LD_LIBRARY_PATH_VAR@)" \ - PATH="$(EXTRA_PATH):$(PATH)" \ - TCLLIBPATH="$(top_builddir)" -TCLSH_PROG = @TCLSH_PROG@ -TCLSH = $(TCLSH_ENV) $(TCLSH_PROG) -SHARED_BUILD = @SHARED_BUILD@ - -INCLUDES = @PKG_INCLUDES@ @TCL_INCLUDES@ $(SSL_INCLUDES) - -PKG_CFLAGS = @PKG_CFLAGS@ - -#DEFS = $(TCL_DEFS) @DEFS@ $(EXTRA_CFLAGS) -DEFS = @DEFS@ $(PKG_CFLAGS) - -CONFIG_CLEAN_FILES = Makefile pkgIndex.tcl - -CPPFLAGS = @CPPFLAGS@ -LIBS = @PKG_LIBS@ @LIBS@ -AR = ar -CFLAGS = @CFLAGS@ -COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) - -#======================================================================== -# Start of user-definable TARGETS section -#======================================================================== - -#======================================================================== -# TEA TARGETS. Please note that the "libraries:" target refers to platform -# independent files, and the "binaries:" target inclues executable programs and -# platform-dependent libraries. Modify these targets so that they install -# the various pieces of your package. The make and install rules -# for the BINARIES that you specified above have already been done. -#======================================================================== - -all: binaries libraries doc - -#======================================================================== -# The binaries target builds executable programs, Windows .dll's, unix -# shared/static libraries, and any other platform-dependent files. -# The list of targets to build for "binaries:" is specified at the top -# of the Makefile, in the "BINARIES" variable. -#======================================================================== - -binaries: $(BINARIES) pkgIndex.tcl - -libraries: $(PKG_TCL_SOURCES) - -doc: - -install: all install-binaries install-libraries install-doc - -install-binaries: binaries install-lib-binaries install-bin-binaries - -#======================================================================== -# This rule installs platform-independent files, such as header files. -#======================================================================== - -install-libraries: libraries - @mkdir -p $(DESTDIR)$(includedir) - @echo "Installing header files in $(DESTDIR)$(includedir)" - @list='$(PKG_HEADERS)'; for i in $$list; do \ - echo "Installing $(srcdir)/$$i" ; \ - $(INSTALL_DATA) $(srcdir)/$$i $(DESTDIR)$(includedir) ; \ - done; - -#======================================================================== -# Install documentation. Unix manpages should go in the $(mandir) -# directory. -#======================================================================== - -install-doc: doc -# @mkdir -p $(DESTDIR)$(mandir)/mann -# @echo "Installing documentation in $(DESTDIR)$(mandir)" -# @for i in $(srcdir)/doc/*.n; do \ -# echo "Installing $$i"; \ -# rm -f $(DESTDIR)$(mandir)/mann/`basename $$i`; \ -# $(INSTALL_DATA) $$i $(DESTDIR)$(mandir)/mann ; \ -# done - -test: binaries libraries - echo "load $(PKG_LIB_FILE); \ - if {![file exists tls.tcl]} { \ - file copy [file join $(srcdir) tls.tcl] tls.tcl \ - } ;\ - source [file join $(srcdir) tls.tcl]; \ - set argv {$(TESTFLAGS)}; \ - source [file join $(srcdir) tests all.tcl]" | $(TCLSH) - -shell: binaries libraries - @$(TCLSH) $(SCRIPT) - -gdb: - $(TCLSH_ENV) gdb $(TCLSH_PROG) $(SCRIPT) - -depend: - -#======================================================================== -# $(PKG_LIB_FILE) should be listed as part of the BINARIES variable -# mentioned above. That will ensure that this target is built when you -# run "make binaries". -# -# The $(PKG_OBJECTS) objects are created and linked into the final -# library. In most cases these object files will correspond to the -# source files above. -#======================================================================== - -$(PKG_LIB_FILE): $(PKG_OBJECTS) - -rm -f $(PKG_LIB_FILE) - ${MAKE_LIB} - -$(RANLIB) $(PKG_LIB_FILE) - -#======================================================================== -# We need to enumerate the list of .c to .o lines here. -# -# In the following lines, $(srcdir) refers to the toplevel directory -# containing your extension. If your sources are in a subdirectory, -# you will have to modify the paths to reflect this: -# -# sample.$(OBJEXT): $(srcdir)/generic/sample.c -# $(COMPILE) -c `@CYGPATH@ $(srcdir)/generic/sample.c` -o $@ -# -# Setting the VPATH variable to a list of paths will cause the makefile -# to look into these paths when resolving .c to .obj dependencies. -# As necessary, add $(srcdir):$(srcdir)/compat:.... -#======================================================================== - -VPATH = $(srcdir) - -.c.@OBJEXT@: - $(COMPILE) -c `@CYGPATH@ $<` -o $@ - -#======================================================================== -# Create the pkgIndex.tcl file. -# It is usually easiest to let Tcl do this for you with pkg_mkIndex, but -# you may find that you need to customize the package. If so, either -# modify the -hand version, or create a pkgIndex.tcl.in file and have -# the configure script output the pkgIndex.tcl by editing configure.in. -#======================================================================== - -pkgIndex.tcl-auto: - ( echo pkg_mkIndex . $(PKG_LIB_FILE) \; exit; ) | $(TCLSH) - -pkgIndex.tcl: - (echo 'package ifneeded $(PACKAGE_NAME) $(PACKAGE_VERSION) \ - "[list source [file join $$dir tls.tcl]] ; \ - [list tls::initlib $$dir $(PKG_LIB_FILE)]"'\ - ) > pkgIndex.tcl - -#======================================================================== -# End of user-definable section -#======================================================================== - -#======================================================================== -# Don't modify the file to clean here. Instead, set the "CLEANFILES" -# variable in configure.in -#======================================================================== - -clean: - -test -z "$(BINARIES)" || rm -f $(BINARIES) - -rm -f *.$(OBJEXT) core *.core - -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) - -distclean: clean - -rm -f *.tab.c - -rm -f $(CONFIG_CLEAN_FILES) - -rm -f config.cache config.log config.status - -COMPEXE = gzip -COMPEXT = gz -COMPRESS = tar cvf - $(PKG_DIR) | $(COMPEXE) > $(PKG_DIR)-src.tar.$(COMPEXT) -DIST_ROOT = /tmp/dist -DIST_DIR = $(DIST_ROOT)/$(PKG_DIR) - -dist-clean: - rm -rf $(DIST_DIR) $(DIST_ROOT)/$(PKG_DIR).tar.$(COMPEXT) - -dist: dist-clean - mkdir -p $(DIST_DIR) - cp -p $(srcdir)/README.txt $(srcdir)/ChangeLog $(srcdir)/tls.htm \ - $(srcdir)/configure $(srcdir)/configure.in \ - $(srcdir)/Makefile.in $(srcdir)/*.[ch] \ - $(srcdir)/license.terms \ - $(srcdir)/aclocal.m4 $(srcdir)/tls.tcl \ - $(DIST_DIR) - chmod 664 $(DIST_DIR)/Makefile.in $(DIST_DIR)/aclocal.m4 - chmod 775 $(DIST_DIR)/configure $(DIST_DIR)/configure.in - - mkdir $(DIST_DIR)/tclconfig - cp -p $(srcdir)/tclconfig/install-sh $(srcdir)/tclconfig/tcl.m4 \ - $(DIST_DIR)/tclconfig/ - chmod 664 $(DIST_DIR)/tclconfig/tcl.m4 - chmod +x $(DIST_DIR)/tclconfig/install-sh - - mkdir $(DIST_DIR)/tests - cp -p $(srcdir)/tests/*.{tcl,test} $(DIST_DIR)/tests - - mkdir $(DIST_DIR)/tests/certs - cp -p $(srcdir)/tests/certs/*.{pem,key,req,txt,srl} \ - $(DIST_DIR)/tests/certs - - mkdir $(DIST_DIR)/win - cp -p $(srcdir)/win/*.{vc,rc,c} $(DIST_DIR)/win - - (cd $(DIST_ROOT); $(COMPRESS);) - -#======================================================================== -# Install binary object libraries. On Windows this includes both .dll and -# .lib files. Because the .lib files are not explicitly listed anywhere, -# we need to deduce their existence from the .dll file of the same name. -# Additionally, the .dll files go into the bin directory, but the .lib -# files go into the lib directory. On Unix platforms, all library files -# go into the lib directory. In addition, this will generate the pkgIndex.tcl -# file in the install location (assuming it can find a usable tclsh) -# -# You should not have to modify this target. -#======================================================================== - -install-lib-binaries: - @mkdir -p $(DESTDIR)$(pkglibdir) - @list='$(lib_BINARIES)'; for p in $$list; do \ - if test -f $$p; then \ - echo " $(INSTALL_PROGRAM) $$p $(DESTDIR)$(pkglibdir)/$$p"; \ - $(INSTALL_PROGRAM) $$p $(DESTDIR)$(pkglibdir)/$$p; \ - stub=`echo $$p|sed -e "s/.*\(stub\).*/\1/"`; \ - if test "x$$stub" = "xstub"; then \ - echo " $(RANLIB_STUB) $(DESTDIR)$(pkglibdir)/$$p"; \ - $(RANLIB_STUB) $(DESTDIR)$(pkglibdir)/$$p; \ - else \ - echo " $(RANLIB) $(DESTDIR)$(pkglibdir)/$$p"; \ - $(RANLIB) $(DESTDIR)$(pkglibdir)/$$p; \ - fi; \ - ext=`echo $$p|sed -e "s/.*\.//"`; \ - if test "x$$ext" = "xdll"; then \ - lib=`basename $$p|sed -e 's/.[^.]*$$//'`.lib; \ - if test -f $$lib; then \ - echo " $(INSTALL_DATA) $$lib $(DESTDIR)$(pkglibdir)/$$lib"; \ - $(INSTALL_DATA) $$lib $(DESTDIR)$(pkglibdir)/$$lib; \ - fi; \ - fi; \ - fi; \ - done - @list='$(PKG_TCL_SOURCES)'; for p in $$list; do \ - if test -f $(srcdir)/$$p; then \ - destp=`basename $$p`; \ - echo " Install $$destp $(DESTDIR)$(pkglibdir)/$$destp"; \ - $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(pkglibdir)/$$destp; \ - fi; \ - done - @if test "x$(SHARED_BUILD)" = "x1"; then \ - echo " Install pkgIndex.tcl $(DESTDIR)$(pkglibdir)"; \ - $(INSTALL_DATA) pkgIndex.tcl $(DESTDIR)$(pkglibdir); \ - fi - -#======================================================================== -# Install binary executables (e.g. .exe files) -# -# You should not have to modify this target. -#======================================================================== - -install-bin-binaries: - @mkdir -p $(DESTDIR)$(bindir) - @list='$(bin_BINARIES)'; for p in $$list; do \ - if test -f $$p; then \ - echo " $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/$$p"; \ - $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/$$p; \ - fi; \ - done - -.SUFFIXES: .c .$(OBJEXT) - -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - cd $(top_builddir) \ - && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status - -uninstall-binaries: - list='$(lib_BINARIES)'; for p in $$list; do \ - rm -f $(DESTDIR)$(pkglibdir)/$$p; \ - done - list='$(PKG_TCL_SOURCES)'; for p in $$list; do \ - p=`basename $$p`; \ - rm -f $(DESTDIR)$(pkglibdir)/$$p; \ - done - list='$(bin_BINARIES)'; for p in $$list; do \ - rm -f $(DESTDIR)$(bindir)/$$p; \ - done - -.PHONY: all binaries clean depend distclean doc install libraries test - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: +CC = @CC@ +AR = @AR@ +RANLIB = @RANLIB@ +CFLAGS = @CFLAGS@ @SHOBJFLAGS@ +CPPFLAGS = @CPPFLAGS@ -I@srcdir@ -I. @DEFS@ @TCL_DEFS@ +LDFLAGS = @LDFLAGS@ @SHOBJLDFLAGS@ +LIBS = @LIBS@ +INSTALL = @INSTALL@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +TCL_PACKAGE_PATH = @TCL_PACKAGE_PATH@ +PACKAGE_INSTALL_DIR = $(TCL_PACKAGE_PATH)/tcltls$(PACKAGE_VERSION) + +all: @EXTENSION_TARGET@ + +# The shared object target +tcltls.@SHOBJEXT@: tls.o tlsBIO.o tlsIO.o tlsX509.o + $(CC) $(CPPFLAGS) $(CFLAGS) $(LDFLAGS) -o tcltls.@SHOBJEXT@ tls.o tlsBIO.o tlsIO.o tlsX509.o $(LIBS) + +# The static target +tcltls.a: tls.o tlsBIO.o tlsIO.o tlsX509.o + $(AR) rcu tcltls.a.new tls.o tlsBIO.o tlsIO.o tlsX509.o + $(RANLIB) tcltls.a.new + mv tcltls.a.new tcltls.a + +# Dependencies for all our targets +tls.o: @srcdir@/tls.c @srcdir@/tlsInt.h @srcdir@/tclOpts.h @srcdir@/tls.tcl.h dh_params.h +tlsBIO.o: @srcdir@/tlsBIO.c @srcdir@/tlsInt.h +tlsIO.o: @srcdir@/tlsIO.c @srcdir@/tlsInt.h +tlsX509.o: @srcdir@/tlsX509.c @srcdir@/tlsInt.h + +# Create a C-source-ified version of the script resources +# for TclTLS so that we only need a single file to enable +# this extension +@srcdir@/tls.tcl.h: @srcdir@/tls.tcl + xxd -i < '@srcdir@/tls.tcl' > '@srcdir@/tls.tcl.h.new' + mv '@srcdir@/tls.tcl.h.new' '@srcdir@/tls.tcl.h' + +# Create default DH parameters +dh_params.h: @srcdir@/gen_dh_params + @srcdir@/gen_dh_params @GEN_DH_PARAMS_ARGS@ > dh_params.h.new + mv dh_params.h.new dh_params.h + +# Generic target for building files from the "srcdir" +# tree -- the default target will not match paths +%.o: @srcdir@/%.c + $(CC) $(CPPFLAGS) $(CFLAGS) -o "$@" -c "$<" + +# Install the extension +install: @EXTENSION_TARGET@ pkgIndex.tcl + $(INSTALL) -d '$(DESTDIR)$(PACKAGE_INSTALL_DIR)' + $(INSTALL) -t '$(DESTDIR)$(PACKAGE_INSTALL_DIR)' @EXTENSION_TARGET@ pkgIndex.tcl + +# Clean the local build directory for rebuild against the same configuration +clean: + rm -f tls.o tlsBIO.o tlsIO.o tlsX509.o + rm -f tcltls.@SHOBJEXT@ + rm -f tcltls.a.new tcltls.a + +# Clean the local build directory back to what it was after unpacking the +# distribution tarball +distclean: clean + rm -f config.log config.status + rm -f dh_params.h.new dh_params.h + rm -f Makefile pkgIndex.tcl + +# Clean the local build directory back to only thing things that exist in +# version control system +mrproper: distclean + rm -f @srcdir@/tls.tcl.h + rm -f @srcdir@/configure @srcdir@/config.sub @srcdir@/config.guess @srcdir@/install-sh + rm -f @srcdir@/aclocal.m4 + rm -rf @srcdir@/autom4te.cache + +.PHONY: all install clean distclean mrproper Index: README.txt ================================================================== --- README.txt +++ README.txt @@ -1,11 +1,9 @@ Original TLS Copyright (C) 1997-2000 Matt Newman TLS 1.4.1 Copyright (C) 2000 Ajuba Solutions TLS 1.6 Copyright (C) 2008 ActiveState Software Inc. -$Header: /home/rkeene/tmp/cvs2fossil/../tcltls/tls/tls/README.txt,v 1.7 2008/03/19 22:49:12 hobbs2 Exp $ - TLS (aka SSL) Channel - can be layered on any bi-directional Tcl_Channel. Both client and server-side sockets are possible, and this code should work on any platform as it uses a generic mechanism for layering on SSL and Tcl. DELETED aclocal.m4 Index: aclocal.m4 ================================================================== --- aclocal.m4 +++ /dev/null @@ -1,161 +0,0 @@ -builtin(include,tclconfig/tcl.m4) - -#------------------------------------------------------------------------ -# TLS_SSL_DIR -- -# -# Locate the installed ssl files -# -# Arguments: -# None. -# -# Requires: -# CYGPATH must be set -# -# Results: -# -# Adds a --with-ssl-dir switch to configure. -# Result is cached. -# -# Substs the following vars: -# SSL_DIR -#------------------------------------------------------------------------ - -AC_DEFUN(TLS_CHECK_SSL, [ - - #-------------------------------------------------------------------- - # If the variable OPENSSL is set, we will build with the OpenSSL - # libraries. If it is not set, then we will use RSA BSAFE SSL-C - # libraries instead of the default OpenSSL libaries. - #-------------------------------------------------------------------- - - AC_ARG_ENABLE(bsafe, [ --enable-bsafe Use RSA BSAFE SSL-C libs. Default is to use OpenSSL libs], OPENSSL="", OPENSSL="1") - - #-------------------------------------------------------------------- - # Establish the location of the root directory for OpenSSL. - # If we're not using OpenSSL, set the root for BSAFE SSL-C. - # If we're using BSAFE, define the BSAFE compiler flag. - # The "FLAT_INC" flag is used in the BSAFE ssl.h header file and - # doesn't seem to be referenced anywhere else. - #-------------------------------------------------------------------- - if test -n "${OPENSSL}"; then - SSL_DIR='/usr /usr/local' - AC_DEFINE(NO_IDEA) - AC_DEFINE(NO_RC5) - else - SSL_DIR='/usr/sslc /usr/local/sslc' - AC_DEFINE(BSAFE) - AC_DEFINE(FLAT_INC) - fi - - AC_MSG_CHECKING([for SSL directory]) - - AC_ARG_WITH(ssl-dir, [ --with-ssl-dir=DIR SSL root directory], with_ssldir=${withval}) - - AC_CACHE_VAL(ac_cv_c_ssldir, [ - # Use the value from --with-ssl-dir, if it was given - if test x"${with_ssldir}" != x ; then - if test -d "${with_ssldir}" ; then - ac_cv_c_ssldir=${with_ssldir} - else - AC_MSG_ERROR([${with_ssldir} is not a valid directory]) - fi - else - list="`ls -d ${SSL_DIR} 2>/dev/null`" - for i in $list ; do - if test -d "$i" ; then - ac_cv_c_ssldir=$i - break - fi - done - fi - ]) - - # Print a message based on how we determined the include path - - if test x"${ac_cv_c_ssldir}" = x ; then - AC_MSG_ERROR([Could not find SSL directory. -Please specify its location with --with-ssl-dir]) - else - SSL_DIR=${ac_cv_c_ssldir} - AC_MSG_RESULT([${SSL_DIR}]) - fi - - - #-------------------------------------------------------------------- - # The OpenSSL and BSAFE SSL-C directory structures differ. - #-------------------------------------------------------------------- - - if test -n "${OPENSSL}"; then - SSL_LIB_DIR=${SSL_DIR}/lib - SSL_INCLUDE_DIR=${SSL_DIR}/include - if test ! -f "${SSL_INCLUDE_DIR}/openssl/opensslv.h"; then - AC_ERROR([bad ssl-dir: cannot find openssl/opensslv.h under ${SSL_INCLUDE_DIR}]) - fi - else - #-------------------------------------------------------------------- - # If we're using RSA BSAFE SSL-C, we need to establish what platform - # we're running on before we can figure out some paths. - # This step isn't necessary if we're using OpenSSL. - #-------------------------------------------------------------------- - - if test -z "${OPENSSL}"; then - AC_MSG_CHECKING([host type]) - case "`uname -s`" in - *win32* | *WIN32* | *CYGWIN_NT*|*CYGWIN_98*|*CYGWIN_95*) - PLATFORM=WIN32 - ;; - *SunOS*) - PLATFORM=SOLARIS - ;; - HP-UX) - PLATFORM=HPUX - ;; - *) - PLATFORM=LINUX - ;; - esac - AC_MSG_RESULT(${PLATFORM}) - fi - SSL_LIB_DIR=${SSL_DIR}/${PLATFORM}/library/lib - SSL_INCLUDE_DIR=${SSL_DIR}/${PLATFORM}/library/include - if test ! -f "${SSL_INCLUDE_DIR}/crypto.h"; then - AC_ERROR([bad ssl-dir: cannot find crypto.h under ${SSL_INCLUDE_DIR}]) - fi - fi - - AC_SUBST(SSL_DIR) - AC_SUBST(SSL_LIB_DIR) - AC_SUBST(SSL_INCLUDE_DIR) - - SSL_INCLUDE_DIR_NATIVE=\"`${CYGPATH} ${SSL_INCLUDE_DIR}`\" - SSL_LIB_DIR_NATIVE=\"`${CYGPATH} ${SSL_LIB_DIR}`\" - AC_SUBST(SSL_INCLUDE_DIR_NATIVE) - AC_SUBST(SSL_LIB_DIR_NATIVE) - - #-------------------------------------------------------------------- - # If OpenSSL was built with gcc then there may be some symbols that need - # resolving before we can load it into tclsh (__udivd3i on solaris. - # Let the user specify if we need to add libgcc to the link line to - # resolve these symbols. - # - # This doesn't seem to be necessary if the RSA BSAFE SSL-C libraries - # are used instead of OpenSSL. - #-------------------------------------------------------------------- - - if test -n "${OPENSSL}"; then - AC_MSG_CHECKING(if libgcc is needed to resolve openssl symbols) - - AC_ARG_WITH(gcclib, [ --with-gcclib link with libgcc to resolve symbols in a gcc-built openssl library], GCCLIB="-lgcc", GCCLIB="") - - if test "x${GCCLIB}" = "x" ; then - AC_MSG_RESULT(no) - else - AC_MSG_RESULT(yes) - AC_MSG_CHECKING(for gcc library location) - GCCPATH=`${CC} -print-libgcc-file-name | sed -e 's#[^/]*$##'` - GCCPATH="-L${GCCPATH}" - AC_MSG_RESULT(${GCCPATH}) - fi - fi - -]) ADDED aclocal/shobj.m4 Index: aclocal/shobj.m4 ================================================================== --- /dev/null +++ aclocal/shobj.m4 @@ -0,0 +1,199 @@ +dnl Usage: +dnl DC_TEST_SHOBJFLAGS(shobjflags, shobjldflags, action-if-not-found) +dnl +AC_DEFUN([DC_TEST_SHOBJFLAGS], [ + AC_SUBST(SHOBJFLAGS) + AC_SUBST(SHOBJCPPFLAGS) + AC_SUBST(SHOBJLDFLAGS) + + OLD_LDFLAGS="$LDFLAGS" + OLD_CFLAGS="$CFLAGS" + OLD_CPPFLAGS="$CPPFLAGS" + + SHOBJFLAGS="" + SHOBJCPPFLAGS="" + SHOBJLDFLAGS="" + + CFLAGS="$OLD_CFLAGS $1" + CPPFLAGS="$OLD_CPPFLAGS $2" + LDFLAGS="$OLD_LDFLAGS $3" + + AC_TRY_LINK([#include +int unrestst(void);], [ printf("okay\n"); unrestst(); return(0); ], [ SHOBJFLAGS="$1"; SHOBJCPPFLAGS="$2"; SHOBJLDFLAGS="$3" ], [ + LDFLAGS="$OLD_LDFLAGS" + CFLAGS="$OLD_CFLAGS" + CPPFLAGS="$OLD_CPPFLAGS" + $4 + ]) + + LDFLAGS="$OLD_LDFLAGS" + CFLAGS="$OLD_CFLAGS" + CPPFLAGS="$OLD_CPPFLAGS" +]) + +AC_DEFUN([DC_GET_SHOBJFLAGS], [ + AC_SUBST(SHOBJFLAGS) + AC_SUBST(SHOBJCPPFLAGS) + AC_SUBST(SHOBJLDFLAGS) + + DC_CHK_OS_INFO + + AC_MSG_CHECKING(how to create shared objects) + + if test -z "$SHOBJFLAGS" -a -z "$SHOBJLDFLAGS" -a -z "$SHOBJCPPFLAGS"; then + DC_TEST_SHOBJFLAGS([-fPIC], [-DPIC], [-shared -rdynamic], [ + DC_TEST_SHOBJFLAGS([-fPIC], [-DPIC], [-shared], [ + DC_TEST_SHOBJFLAGS([-fPIC], [-DPIC], [-shared -rdynamic -mimpure-text], [ + DC_TEST_SHOBJFLAGS([-fPIC], [-DPIC], [-shared -mimpure-text], [ + DC_TEST_SHOBJFLAGS([-fPIC], [-DPIC], [-shared -rdynamic -Wl,-G,-z,textoff], [ + DC_TEST_SHOBJFLAGS([-fPIC], [-DPIC], [-shared -Wl,-G], [ + DC_TEST_SHOBJFLAGS([-fPIC], [-DPIC], [-shared -dynamiclib -flat_namespace -undefined suppress -bind_at_load], [ + DC_TEST_SHOBJFLAGS([-fPIC], [-DPIC], [-dynamiclib -flat_namespace -undefined suppress -bind_at_load], [ + DC_TEST_SHOBJFLAGS([-fPIC], [-DPIC], [-Wl,-dynamiclib -Wl,-flat_namespace -Wl,-undefined,suppress -Wl,-bind_at_load], [ + DC_TEST_SHOBJFLAGS([-fPIC], [-DPIC], [-dynamiclib -flat_namespace -undefined suppress], [ + DC_TEST_SHOBJFLAGS([-fPIC], [-DPIC], [-dynamiclib], [ + AC_MSG_RESULT(cant) + AC_MSG_ERROR([We are unable to make shared objects.]) + ]) + ]) + ]) + ]) + ]) + ]) + ]) + ]) + ]) + ]) + ]) + fi + + AC_MSG_RESULT($SHOBJCPPFLAGS $SHOBJFLAGS $SHOBJLDFLAGS) + + DC_SYNC_SHLIBOBJS +]) + +AC_DEFUN([DC_SYNC_SHLIBOBJS], [ + AC_SUBST(SHLIBOBJS) + SHLIBOBJS="" + for obj in $LIB@&t@OBJS; do + SHLIBOBJS="$SHLIBOBJS `echo $obj | sed 's/\.o$/_shr.o/g'`" + done +]) + +AC_DEFUN([DC_SYNC_RPATH], [ + OLD_LDFLAGS="$LDFLAGS" + + for tryrpath in "-Wl,-rpath" "-Wl,--rpath" "-Wl,-R"; do + LDFLAGS="$OLD_LDFLAGS $tryrpath -Wl,/tmp" + AC_LINK_IFELSE(AC_LANG_PROGRAM([], [ return(0); ]), [ + rpathldflags="$tryrpath" + break + ]) + done + unset tryrpath + + LDFLAGS="$OLD_LDFLAGS" + unset OLD_LDFLAGS + + ADDLDFLAGS="" + for opt in $LDFLAGS; do + if echo "$opt" | grep '^-L' >/dev/null; then + rpathdir=`echo "$opt" | sed 's@^-L *@@'` + ADDLDFLAGS="$ADDLDFLAGS $rpathldflags -Wl,$rpathdir" + fi + done + unset opt rpathldflags + + LDFLAGS="$LDFLAGS $ADDLDFLAGS" + + unset ADDLDFLAGS +]) + +AC_DEFUN([DC_CHK_OS_INFO], [ + AC_CANONICAL_HOST + AC_SUBST(SHOBJEXT) + AC_SUBST(SHOBJFLAGS) + AC_SUBST(SHOBJCPPFLAGS) + AC_SUBST(SHOBJLDFLAGS) + AC_SUBST(CFLAGS) + AC_SUBST(CPPFLAGS) + AC_SUBST(AREXT) + + if test "$dc_cv_dc_chk_os_info_called" != '1'; then + dc_cv_dc_chk_os_info_called='1' + + AC_MSG_CHECKING(host operating system) + AC_MSG_RESULT($host_os) + + SHOBJEXT="so" + AREXT="a" + + case $host_os in + darwin*) + SHOBJEXT="dylib" + ;; + hpux*) + case "$host_cpu" in + ia64) + SHOBJEXT="so" + ;; + *) + SHOBJEXT="sl" + ;; + esac + ;; + aix[0-9].*) + SHOBJEXT="a" + ;; + mingw32|mingw32msvc*) + SHOBJEXT="dll" + CFLAGS="$CFLAGS -mms-bitfields" + CPPFLAGS="$CPPFLAGS -mms-bitfields" + SHOBJCPPFLAGS="-DPIC" + SHOBJLDFLAGS='-shared -Wl,--dll -Wl,--enable-auto-image-base -Wl,--output-def,$[@].def,--out-implib,$[@].a' + ;; + msvc) + SHOBJEXT="dll" + CFLAGS="$CFLAGS -nologo" + SHOBJCPPFLAGS='-DPIC' + SHOBJLDFLAGS='/LD /LINK /NODEFAULTLIB:MSVCRT' + ;; + cygwin*) + SHOBJEXT="dll" + SHOBJFLAGS="-fPIC" + SHOBJCPPFLAGS="-DPIC" + CFLAGS="$CFLAGS -mms-bitfields" + CPPFLAGS="$CPPFLAGS -mms-bitfields" + SHOBJLDFLAGS='-shared -Wl,--enable-auto-image-base -Wl,--output-def,$[@].def,--out-implib,$[@].a' + ;; + esac + fi +]) + +AC_DEFUN([SHOBJ_SET_SONAME], [ + SAVE_LDFLAGS="$LDFLAGS" + + AC_MSG_CHECKING([how to specify soname]) + + for try in "-Wl,--soname,$1" "Wl,-install_name,$1" '__fail__'; do + LDFLAGS="$SAVE_LDFLAGS" + + if test "${try}" = '__fail__'; then + AC_MSG_RESULT([can't]) + + break + fi + + LDFLAGS="${LDFLAGS} ${try}" + AC_TRY_LINK([void TestTest(void) { return; }], [], [ + LDFLAGS="${SAVE_LDFLAGS}" + SHOBJLDFLAGS="${SHOBJLDFLAGS} ${try}" + + AC_MSG_RESULT([$try]) + + break + ]) + done + + AC_SUBST(SHOBJLDFLAGS) +]) ADDED aclocal/tcl.m4 Index: aclocal/tcl.m4 ================================================================== --- /dev/null +++ aclocal/tcl.m4 @@ -0,0 +1,161 @@ +dnl Tcl M4 Routines + +dnl Find a runnable Tcl +AC_DEFUN([TCLEXT_FIND_TCLSH_PROG], [ + AC_CACHE_CHECK([runnable tclsh], [tcl_cv_tclsh_native_path], [ + dnl Try to find a runnable tclsh + if test -z "$TCLCONFIGPATH"; then + TCLCONFIGPATH=/dev/null/null + fi + + for try_tclsh in "$TCLSH_NATIVE" "$TCLCONFIGPATH/../bin/tclsh" \ + "$TCLCONFIGPATH/../bin/tclsh8.6" \ + "$TCLCONFIGPATH/../bin/tclsh8.5" \ + "$TCLCONFIGPATH/../bin/tclsh8.4" \ + `which tclsh 2>/dev/null` \ + `which tclsh8.6 2>/dev/null` \ + `which tclsh8.5 2>/dev/null` \ + `which tclsh8.4 2>/dev/null` \ + tclsh; do + if test -z "$try_tclsh"; then + continue + fi + if test -x "$try_tclsh"; then + if echo 'exit 0' | "$try_tclsh" 2>/dev/null >/dev/null; then + tcl_cv_tclsh_native_path="$try_tclsh" + + break + fi + fi + done + + if test "$TCLCONFIGPATH" = '/dev/null/null'; then + unset TCLCONFIGPATH + fi + ]) + + TCLSH_PROG="${tcl_cv_tclsh_native_path}" + AC_SUBST(TCLSH_PROG) +]) + + +dnl Must call AC_CANONICAL_HOST before calling us +AC_DEFUN([TCLEXT_FIND_TCLCONFIG], [ + + TCLCONFIGPATH="" + AC_ARG_WITH([tcl], AS_HELP_STRING([--with-tcl], [directory containing tcl configuration (tclConfig.sh)]), [ + if test "x$withval" = "xno"; then + AC_MSG_ERROR([cant build without tcl]) + fi + + TCLCONFIGPATH="$withval" + ], [ + if test "$cross_compiling" = 'no'; then + TCLEXT_FIND_TCLSH_PROG + tclConfigCheckDir="`echo 'puts [[tcl::pkgconfig get libdir,runtime]]' | "$TCLSH_PROG"`" + else + tclConfigCheckDir=/dev/null/null + fi + + if test "$cross_compiling" = 'no'; then + dirs="/usr/$host_alias/lib /usr/lib /usr/lib64 /usr/local/lib /usr/local/lib64" + else + dirs='' + fi + + for dir in "$tclConfigCheckDir" $dirs; do + if test -f "$dir/tclConfig.sh"; then + TCLCONFIGPATH="$dir" + + break + fi + done + ]) + + AC_MSG_CHECKING([for path to tclConfig.sh]) + + if test -z "$TCLCONFIGPATH"; then + AC_MSG_ERROR([unable to locate tclConfig.sh. Try --with-tcl.]) + fi + + AC_SUBST(TCLCONFIGPATH) + + AC_MSG_RESULT([$TCLCONFIGPATH]) + + dnl Find Tcl if we haven't already + if test -z "$TCLSH_PROG"; then + TCLEXT_FIND_TCLSH_PROG + fi +]) + +dnl Must define TCLCONFIGPATH before calling us (i.e., by TCLEXT_FIND_TCLCONFIG) +AC_DEFUN([TCLEXT_LOAD_TCLCONFIG], [ + AC_MSG_CHECKING([for working tclConfig.sh]) + + if test -f "$TCLCONFIGPATH/tclConfig.sh"; then + . "$TCLCONFIGPATH/tclConfig.sh" + else + AC_MSG_ERROR([unable to load tclConfig.sh]) + fi + + + AC_MSG_RESULT([found]) +]) + +AC_DEFUN([TCLEXT_INIT], [ + AC_CANONICAL_HOST + + TCLEXT_FIND_TCLCONFIG + TCLEXT_LOAD_TCLCONFIG + + AC_DEFINE_UNQUOTED([MODULE_SCOPE], [static], [Define how to declare a function should only be visible to the current module]) + + TCLEXT_BUILD='shared' + AC_ARG_ENABLE([static], AS_HELP_STRING([--enable-static], [enable a static build]), [ + if test "$enableval" = "yes"; then + TCLEXT_BUILD='static' + TCL_SUPPORTS_STUBS=0 + fi + ]) + + AC_ARG_ENABLE([stubs], AS_HELP_STRING([--disable-stubs], [disable use of Tcl stubs]), [ + if test "$enableval" = "no"; then + TCL_SUPPORTS_STUBS=0 + else + TCL_SUPPORTS_STUBS=1 + fi + ]) + + if test "$TCL_SUPPORTS_STUBS" = "1"; then + AC_DEFINE([USE_TCL_STUBS], [1], [Define if you are using the Tcl Stubs Mechanism]) + + TCL_STUB_LIB_SPEC="`eval echo "${TCL_STUB_LIB_SPEC}"`" + LIBS="${LIBS} ${TCL_STUB_LIB_SPEC}" + else + TCL_LIB_SPEC="`eval echo "${TCL_LIB_SPEC}"`" + LIBS="${LIBS} ${TCL_LIB_SPEC}" + fi + + TCL_INCLUDE_SPEC="`eval echo "${TCL_INCLUDE_SPEC}"`" + + CFLAGS="${CFLAGS} ${TCL_INCLUDE_SPEC}" + CPPFLAGS="${CPPFLAGS} ${TCL_INCLUDE_SPEC}" + TCL_DEFS_TCL_ONLY=`( + eval "set -- ${TCL_DEFS}" + for flag in "[$]@"; do + case "${flag}" in + -DTCL_*) + AS_ECHO_N("${flag} ") + ;; + esac + done + )` + TCL_DEFS="${TCL_DEFS_TCL_ONLY}" + AC_SUBST(TCL_DEFS) + + dnl Needed for package installation + TCL_PACKAGE_PATH="`echo "${TCL_PACKAGE_PATH}" | sed 's@ *$''@@' | awk '{ print [$]1 }'`" + AC_SUBST(TCL_PACKAGE_PATH) + + AC_SUBST(LIBS) +]) ADDED aclocal/versionscript.m4 Index: aclocal/versionscript.m4 ================================================================== --- /dev/null +++ aclocal/versionscript.m4 @@ -0,0 +1,85 @@ +AC_DEFUN([DC_SETUP_STABLE_API], [ + VERSIONSCRIPT="$1" + SYMFILE="$2" + + DC_FIND_STRIP_AND_REMOVESYMS([$SYMFILE]) + DC_SETVERSIONSCRIPT([$VERSIONSCRIPT], [$SYMFILE]) +]) + + +AC_DEFUN([DC_SETVERSIONSCRIPT], [ + VERSIONSCRIPT="$1" + SYMFILE="$2" + TMPSYMFILE="${SYMFILE}.tmp" + TMPVERSIONSCRIPT="${VERSIONSCRIPT}.tmp" + + echo "${SYMPREFIX}Test_Symbol" > "${TMPSYMFILE}" + + echo '{' > "${TMPVERSIONSCRIPT}" + echo ' local:' >> "${TMPVERSIONSCRIPT}" + echo " ${SYMPREFIX}Test_Symbol;" >> "${TMPVERSIONSCRIPT}" + echo '};' >> "${TMPVERSIONSCRIPT}" + + SAVE_LDFLAGS="${LDFLAGS}" + + AC_MSG_CHECKING([for how to set version script]) + + for tryaddldflags in "-Wl,--version-script,${TMPVERSIONSCRIPT}" "-Wl,-exported_symbols_list,${TMPSYMFILE}"; do + LDFLAGS="${SAVE_LDFLAGS} ${tryaddldflags}" + AC_TRY_LINK([void Test_Symbol(void) { return; }], [], [ + addldflags="`echo "${tryaddldflags}" | sed 's/\.tmp$//'`" + + break + ]) + done + + rm -f "${TMPSYMFILE}" + rm -f "${TMPVERSIONSCRIPT}" + + LDFLAGS="${SAVE_LDFLAGS}" + + if test -n "${addldflags}"; then + SHOBJLDFLAGS="${SHOBJLDFLAGS} ${addldflags}" + + AC_MSG_RESULT($addldflags) + else + AC_MSG_RESULT([don't know]) + fi + + AC_SUBST(SHOBJLDFLAGS) +]) + +AC_DEFUN([DC_FIND_STRIP_AND_REMOVESYMS], [ + SYMFILE="$1" + + dnl Determine how to strip executables + AC_CHECK_TOOLS(OBJCOPY, objcopy gobjcopy, [false]) + AC_CHECK_TOOLS(STRIP, strip gstrip, [false]) + + if test "x${STRIP}" = "xfalse"; then + STRIP="${OBJCOPY}" + fi + + WEAKENSYMS='true' + REMOVESYMS='true' + SYMPREFIX='' + + case $host_os in + darwin*) + SYMPREFIX="_" + REMOVESYMS="${STRIP} -u -x" + ;; + *) + if test "x${OBJCOPY}" != "xfalse"; then + WEAKENSYMS="${OBJCOPY} --keep-global-symbols=${SYMFILE}" + REMOVESYMS="${OBJCOPY} --discard-all" + elif test "x${STRIP}" != "xfalse"; then + REMOVESYMS="${STRIP} -x" + fi + ;; + esac + + AC_SUBST(WEAKENSYMS) + AC_SUBST(REMOVESYMS) + AC_SUBST(SYMPREFIX) +]) ADDED autogen.sh Index: autogen.sh ================================================================== --- /dev/null +++ autogen.sh @@ -0,0 +1,42 @@ +#! /usr/bin/env bash + +urls=( + http://chiselapp.com/user/rkeene/repository/autoconf/doc/trunk/tcl.m4 + http://chiselapp.com/user/rkeene/repository/autoconf/doc/trunk/shobj.m4 + http://chiselapp.com/user/rkeene/repository/autoconf/doc/trunk/versionscript.m4 +) + +cd "$(dirname "$(which "$0")")" || exit 1 + +mkdir aclocal >/dev/null 2>/dev/null + +files=() + +for url in "${urls[@]}"; do + file="aclocal/$(echo "${url}" | sed 's@^.*/@@')" + + curl -lsS "${url}" > "${file}.new" || exit 1 + if diff "${file}.new" "${file}" >/dev/null 2>/dev/null; then + rm -f "${file}.new" + else + mv "${file}.new" "${file}" + fi + + files=("${files[@]}" "${file}") +done + +for file in "${files[@]}"; do + cat "${file}" +done > aclocal.m4.new + +if diff aclocal.m4.new aclocal.m4 >/dev/null 2>/dev/null; then + rm -f aclocal.m4.new +else + mv aclocal.m4.new aclocal.m4 +fi + +automake --add-missing --copy --force-missing >/dev/null 2>/dev/null + +autoconf + +rm -rf autom4te.cache ADDED build/makearch.info Index: build/makearch.info ================================================================== --- /dev/null +++ build/makearch.info @@ -0,0 +1,46 @@ +# This is the name of the utility, it will be prefixed to the tarball name +UTIL="tcltls" + +# This is the name of output files that should exist after configure +# procedures. +BINS="tcltls.so" + +# This lists the name of files that are required to exist +REQS="" + +# Version of utility, if empty it will be guessed. +# If set to "auto" it will be maintained in a file called .version +# in the source directory and the revision will be incremented +# each time a "makearch" is done. +# +# If @@SVNLCR@@ is used anywhere in this version number, it will be +# replaced with the highest last-changed-rev from the output of +# svn info -R (or 0) +VERS="" + +# Space sperated list of documents, if they exist, they will be +# prefixed with the contents of the DOC_HDR file and substitution +# will occur: +# @@UTIL@@ becomes the utility name ${UTIL} +# @@VERS@@ becomes the utility version +# @@DATE@@ becomes the current date +DOCS="README.txt ChangeLog" +DOC_HDR="HEADER" + +# These files follow the same convention as DOCS, but don't have the header +# tacked onto them. +UPDATE_VARS="configure.ac" + +# This script is executed immediately after copying the files +# to a temp directory to attempt to compile +BEFORE="build/pre.sh" + +# This script is executed after updating variables +UPDATED="" + +# This script is executed immediately prior to creation of the +# tarball +AFTER="build/post.sh" + +# Files matching these (space-seperated) patterns are deleted +TMPS="*.out HEADER" ADDED build/post.sh Index: build/post.sh ================================================================== --- /dev/null +++ build/post.sh @@ -0,0 +1,6 @@ +#! /usr/bin/env bash + +rm -rf build +rm -f autogen.sh + +exit 0 ADDED build/pre.sh Index: build/pre.sh ================================================================== --- /dev/null +++ build/pre.sh @@ -0,0 +1,6 @@ +#! /usr/bin/env bash + +./autogen.sh || exit 1 +rm -rf aclocal + +exit 0 DELETED configure Index: configure ================================================================== --- configure +++ /dev/null @@ -1,11405 +0,0 @@ -#! /bin/sh -# Guess values for system-dependent variables and create Makefiles. -# Generated by GNU Autoconf 2.59 for tls 1.6.7. -# -# Copyright (C) 2003 Free Software Foundation, Inc. -# This configure script is free software; the Free Software Foundation -# gives unlimited permission to copy, distribute and modify it. -## --------------------- ## -## M4sh Initialization. ## -## --------------------- ## - -# Be Bourne compatible -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then - emulate sh - NULLCMD=: - # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' -elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then - set -o posix -fi -DUALCASE=1; export DUALCASE # for MKS sh - -# Support unset when possible. -if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then - as_unset=unset -else - as_unset=false -fi - - -# Work around bugs in pre-3.0 UWIN ksh. -$as_unset ENV MAIL MAILPATH -PS1='$ ' -PS2='> ' -PS4='+ ' - -# NLS nuisances. -for as_var in \ - LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ - LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ - LC_TELEPHONE LC_TIME -do - if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then - eval $as_var=C; export $as_var - else - $as_unset $as_var - fi -done - -# Required to use basename. -if expr a : '\(a\)' >/dev/null 2>&1; then - as_expr=expr -else - as_expr=false -fi - -if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then - as_basename=basename -else - as_basename=false -fi - - -# Name of the executable. -as_me=`$as_basename "$0" || -$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ - X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)$' \| \ - . : '\(.\)' 2>/dev/null || -echo X/"$0" | - sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } - /^X\/\(\/\/\)$/{ s//\1/; q; } - /^X\/\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` - - -# PATH needs CR, and LINENO needs CR and PATH. -# Avoid depending upon Character Ranges. -as_cr_letters='abcdefghijklmnopqrstuvwxyz' -as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -as_cr_Letters=$as_cr_letters$as_cr_LETTERS -as_cr_digits='0123456789' -as_cr_alnum=$as_cr_Letters$as_cr_digits - -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - echo "#! /bin/sh" >conf$$.sh - echo "exit 0" >>conf$$.sh - chmod +x conf$$.sh - if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then - PATH_SEPARATOR=';' - else - PATH_SEPARATOR=: - fi - rm -f conf$$.sh -fi - - - as_lineno_1=$LINENO - as_lineno_2=$LINENO - as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` - test "x$as_lineno_1" != "x$as_lineno_2" && - test "x$as_lineno_3" = "x$as_lineno_2" || { - # Find who we are. Look in the path if we contain no path at all - # relative or not. - case $0 in - *[\\/]* ) as_myself=$0 ;; - *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break -done - - ;; - esac - # We did not find ourselves, most probably we were run as `sh COMMAND' - # in which case we are not to be found in the path. - if test "x$as_myself" = x; then - as_myself=$0 - fi - if test ! -f "$as_myself"; then - { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2 - { (exit 1); exit 1; }; } - fi - case $CONFIG_SHELL in - '') - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for as_base in sh bash ksh sh5; do - case $as_dir in - /*) - if ("$as_dir/$as_base" -c ' - as_lineno_1=$LINENO - as_lineno_2=$LINENO - as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` - test "x$as_lineno_1" != "x$as_lineno_2" && - test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then - $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } - $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } - CONFIG_SHELL=$as_dir/$as_base - export CONFIG_SHELL - exec "$CONFIG_SHELL" "$0" ${1+"$@"} - fi;; - esac - done -done -;; - esac - - # Create $as_me.lineno as a copy of $as_myself, but with $LINENO - # uniformly replaced by the line number. The first 'sed' inserts a - # line-number line before each line; the second 'sed' does the real - # work. The second script uses 'N' to pair each line-number line - # with the numbered line, and appends trailing '-' during - # substitution so that $LINENO is not a special case at line end. - # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the - # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) - sed '=' <$as_myself | - sed ' - N - s,$,-, - : loop - s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3, - t loop - s,-$,, - s,^['$as_cr_digits']*\n,, - ' >$as_me.lineno && - chmod +x $as_me.lineno || - { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 - { (exit 1); exit 1; }; } - - # Don't try to exec as it changes $[0], causing all sort of problems - # (the dirname of $[0] is not the place where we might find the - # original and so on. Autoconf is especially sensible to this). - . ./$as_me.lineno - # Exit status is that of the last command. - exit -} - - -case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in - *c*,-n*) ECHO_N= ECHO_C=' -' ECHO_T=' ' ;; - *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; - *) ECHO_N= ECHO_C='\c' ECHO_T= ;; -esac - -if expr a : '\(a\)' >/dev/null 2>&1; then - as_expr=expr -else - as_expr=false -fi - -rm -f conf$$ conf$$.exe conf$$.file -echo >conf$$.file -if ln -s conf$$.file conf$$ 2>/dev/null; then - # We could just check for DJGPP; but this test a) works b) is more generic - # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). - if test -f conf$$.exe; then - # Don't use ln at all; we don't have any links - as_ln_s='cp -p' - else - as_ln_s='ln -s' - fi -elif ln conf$$.file conf$$ 2>/dev/null; then - as_ln_s=ln -else - as_ln_s='cp -p' -fi -rm -f conf$$ conf$$.exe conf$$.file - -if mkdir -p . 2>/dev/null; then - as_mkdir_p=: -else - test -d ./-p && rmdir ./-p - as_mkdir_p=false -fi - -as_executable_p="test -f" - -# Sed expression to map a string onto a valid CPP name. -as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" - -# Sed expression to map a string onto a valid variable name. -as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" - - -# IFS -# We need space, tab and new line, in precisely that order. -as_nl=' -' -IFS=" $as_nl" - -# CDPATH. -$as_unset CDPATH - - -# Name of the host. -# hostname on some systems (SVR3.2, Linux) returns a bogus exit status, -# so uname gets run too. -ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` - -exec 6>&1 - -# -# Initializations. -# -ac_default_prefix=/usr/local -ac_config_libobj_dir=. -cross_compiling=no -subdirs= -MFLAGS= -MAKEFLAGS= -SHELL=${CONFIG_SHELL-/bin/sh} - -# Maximum number of lines to put in a shell here document. -# This variable seems obsolete. It should probably be removed, and -# only ac_max_sed_lines should be used. -: ${ac_max_here_lines=38} - -# Identity of this package. -PACKAGE_NAME='tls' -PACKAGE_TARNAME='tls' -PACKAGE_VERSION='1.6.7' -PACKAGE_STRING='tls 1.6.7' -PACKAGE_BUGREPORT='' - -# Factoring default headers for most tests. -ac_includes_default="\ -#include -#if HAVE_SYS_TYPES_H -# include -#endif -#if HAVE_SYS_STAT_H -# include -#endif -#if STDC_HEADERS -# include -# include -#else -# if HAVE_STDLIB_H -# include -# endif -#endif -#if HAVE_STRING_H -# if !STDC_HEADERS && HAVE_MEMORY_H -# include -# endif -# include -#endif -#if HAVE_STRINGS_H -# include -#endif -#if HAVE_INTTYPES_H -# include -#else -# if HAVE_STDINT_H -# include -# endif -#endif -#if HAVE_UNISTD_H -# include -#endif" - -ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS CYGPATH EXEEXT PKG_LIB_FILE PKG_STUB_LIB_FILE PKG_STUB_SOURCES PKG_STUB_OBJECTS PKG_TCL_SOURCES PKG_HEADERS PKG_INCLUDES PKG_LIBS PKG_CFLAGS TCL_VERSION TCL_PATCH_LEVEL TCL_BIN_DIR TCL_SRC_DIR TCL_LIB_FILE TCL_LIB_FLAG TCL_LIB_SPEC TCL_STUB_LIB_FILE TCL_STUB_LIB_FLAG TCL_STUB_LIB_SPEC TCL_LIBS TCL_DEFS TCL_EXTRA_CFLAGS TCL_LD_FLAGS TCL_SHLIB_LD_LIBS CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC OBJEXT CPP INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA SET_MAKE RANLIB ac_ct_RANLIB EGREP MATH_LIBS PKG_SOURCES PKG_OBJECTS CLEANFILES TCL_INCLUDES TCL_THREADS SHARED_BUILD AR CELIB_DIR DL_LIBS CFLAGS_DEBUG CFLAGS_OPTIMIZE CFLAGS_WARNING STLIB_LD SHLIB_LD SHLIB_LD_LIBS SHLIB_CFLAGS LD_LIBRARY_PATH_VAR CFLAGS_DEFAULT LDFLAGS_DEFAULT TCL_DBGX SSL_DIR SSL_LIB_DIR SSL_INCLUDE_DIR SSL_INCLUDE_DIR_NATIVE SSL_LIB_DIR_NATIVE MAKE_LIB MAKE_SHARED_LIB MAKE_STATIC_LIB MAKE_STUB_LIB RANLIB_STUB TCLSH_PROG LIBOBJS LTLIBOBJS' -ac_subst_files='' - -# Initialize some variables set by options. -ac_init_help= -ac_init_version=false -# The variables have the same names as the options, with -# dashes changed to underlines. -cache_file=/dev/null -exec_prefix=NONE -no_create= -no_recursion= -prefix=NONE -program_prefix=NONE -program_suffix=NONE -program_transform_name=s,x,x, -silent= -site= -srcdir= -verbose= -x_includes=NONE -x_libraries=NONE - -# Installation directory options. -# These are left unexpanded so users can "make install exec_prefix=/foo" -# and all the variables that are supposed to be based on exec_prefix -# by default will actually change. -# Use braces instead of parens because sh, perl, etc. also accept them. -bindir='${exec_prefix}/bin' -sbindir='${exec_prefix}/sbin' -libexecdir='${exec_prefix}/libexec' -datadir='${prefix}/share' -sysconfdir='${prefix}/etc' -sharedstatedir='${prefix}/com' -localstatedir='${prefix}/var' -libdir='${exec_prefix}/lib' -includedir='${prefix}/include' -oldincludedir='/usr/include' -infodir='${prefix}/info' -mandir='${prefix}/man' - -ac_prev= -for ac_option -do - # If the previous option needs an argument, assign it. - if test -n "$ac_prev"; then - eval "$ac_prev=\$ac_option" - ac_prev= - continue - fi - - ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'` - - # Accept the important Cygnus configure options, so we can diagnose typos. - - case $ac_option in - - -bindir | --bindir | --bindi | --bind | --bin | --bi) - ac_prev=bindir ;; - -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) - bindir=$ac_optarg ;; - - -build | --build | --buil | --bui | --bu) - ac_prev=build_alias ;; - -build=* | --build=* | --buil=* | --bui=* | --bu=*) - build_alias=$ac_optarg ;; - - -cache-file | --cache-file | --cache-fil | --cache-fi \ - | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) - ac_prev=cache_file ;; - -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ - | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) - cache_file=$ac_optarg ;; - - --config-cache | -C) - cache_file=config.cache ;; - - -datadir | --datadir | --datadi | --datad | --data | --dat | --da) - ac_prev=datadir ;; - -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \ - | --da=*) - datadir=$ac_optarg ;; - - -disable-* | --disable-*) - ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null && - { echo "$as_me: error: invalid feature name: $ac_feature" >&2 - { (exit 1); exit 1; }; } - ac_feature=`echo $ac_feature | sed 's/-/_/g'` - eval "enable_$ac_feature=no" ;; - - -enable-* | --enable-*) - ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null && - { echo "$as_me: error: invalid feature name: $ac_feature" >&2 - { (exit 1); exit 1; }; } - ac_feature=`echo $ac_feature | sed 's/-/_/g'` - case $ac_option in - *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; - *) ac_optarg=yes ;; - esac - eval "enable_$ac_feature='$ac_optarg'" ;; - - -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ - | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ - | --exec | --exe | --ex) - ac_prev=exec_prefix ;; - -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ - | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ - | --exec=* | --exe=* | --ex=*) - exec_prefix=$ac_optarg ;; - - -gas | --gas | --ga | --g) - # Obsolete; use --with-gas. - with_gas=yes ;; - - -help | --help | --hel | --he | -h) - ac_init_help=long ;; - -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) - ac_init_help=recursive ;; - -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) - ac_init_help=short ;; - - -host | --host | --hos | --ho) - ac_prev=host_alias ;; - -host=* | --host=* | --hos=* | --ho=*) - host_alias=$ac_optarg ;; - - -includedir | --includedir | --includedi | --included | --include \ - | --includ | --inclu | --incl | --inc) - ac_prev=includedir ;; - -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ - | --includ=* | --inclu=* | --incl=* | --inc=*) - includedir=$ac_optarg ;; - - -infodir | --infodir | --infodi | --infod | --info | --inf) - ac_prev=infodir ;; - -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) - infodir=$ac_optarg ;; - - -libdir | --libdir | --libdi | --libd) - ac_prev=libdir ;; - -libdir=* | --libdir=* | --libdi=* | --libd=*) - libdir=$ac_optarg ;; - - -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ - | --libexe | --libex | --libe) - ac_prev=libexecdir ;; - -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ - | --libexe=* | --libex=* | --libe=*) - libexecdir=$ac_optarg ;; - - -localstatedir | --localstatedir | --localstatedi | --localstated \ - | --localstate | --localstat | --localsta | --localst \ - | --locals | --local | --loca | --loc | --lo) - ac_prev=localstatedir ;; - -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ - | --localstate=* | --localstat=* | --localsta=* | --localst=* \ - | --locals=* | --local=* | --loca=* | --loc=* | --lo=*) - localstatedir=$ac_optarg ;; - - -mandir | --mandir | --mandi | --mand | --man | --ma | --m) - ac_prev=mandir ;; - -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) - mandir=$ac_optarg ;; - - -nfp | --nfp | --nf) - # Obsolete; use --without-fp. - with_fp=no ;; - - -no-create | --no-create | --no-creat | --no-crea | --no-cre \ - | --no-cr | --no-c | -n) - no_create=yes ;; - - -no-recursion | --no-recursion | --no-recursio | --no-recursi \ - | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) - no_recursion=yes ;; - - -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ - | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ - | --oldin | --oldi | --old | --ol | --o) - ac_prev=oldincludedir ;; - -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ - | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ - | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) - oldincludedir=$ac_optarg ;; - - -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) - ac_prev=prefix ;; - -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) - prefix=$ac_optarg ;; - - -program-prefix | --program-prefix | --program-prefi | --program-pref \ - | --program-pre | --program-pr | --program-p) - ac_prev=program_prefix ;; - -program-prefix=* | --program-prefix=* | --program-prefi=* \ - | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) - program_prefix=$ac_optarg ;; - - -program-suffix | --program-suffix | --program-suffi | --program-suff \ - | --program-suf | --program-su | --program-s) - ac_prev=program_suffix ;; - -program-suffix=* | --program-suffix=* | --program-suffi=* \ - | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) - program_suffix=$ac_optarg ;; - - -program-transform-name | --program-transform-name \ - | --program-transform-nam | --program-transform-na \ - | --program-transform-n | --program-transform- \ - | --program-transform | --program-transfor \ - | --program-transfo | --program-transf \ - | --program-trans | --program-tran \ - | --progr-tra | --program-tr | --program-t) - ac_prev=program_transform_name ;; - -program-transform-name=* | --program-transform-name=* \ - | --program-transform-nam=* | --program-transform-na=* \ - | --program-transform-n=* | --program-transform-=* \ - | --program-transform=* | --program-transfor=* \ - | --program-transfo=* | --program-transf=* \ - | --program-trans=* | --program-tran=* \ - | --progr-tra=* | --program-tr=* | --program-t=*) - program_transform_name=$ac_optarg ;; - - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil) - silent=yes ;; - - -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) - ac_prev=sbindir ;; - -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ - | --sbi=* | --sb=*) - sbindir=$ac_optarg ;; - - -sharedstatedir | --sharedstatedir | --sharedstatedi \ - | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ - | --sharedst | --shareds | --shared | --share | --shar \ - | --sha | --sh) - ac_prev=sharedstatedir ;; - -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ - | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ - | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ - | --sha=* | --sh=*) - sharedstatedir=$ac_optarg ;; - - -site | --site | --sit) - ac_prev=site ;; - -site=* | --site=* | --sit=*) - site=$ac_optarg ;; - - -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) - ac_prev=srcdir ;; - -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) - srcdir=$ac_optarg ;; - - -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ - | --syscon | --sysco | --sysc | --sys | --sy) - ac_prev=sysconfdir ;; - -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ - | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) - sysconfdir=$ac_optarg ;; - - -target | --target | --targe | --targ | --tar | --ta | --t) - ac_prev=target_alias ;; - -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) - target_alias=$ac_optarg ;; - - -v | -verbose | --verbose | --verbos | --verbo | --verb) - verbose=yes ;; - - -version | --version | --versio | --versi | --vers | -V) - ac_init_version=: ;; - - -with-* | --with-*) - ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null && - { echo "$as_me: error: invalid package name: $ac_package" >&2 - { (exit 1); exit 1; }; } - ac_package=`echo $ac_package| sed 's/-/_/g'` - case $ac_option in - *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; - *) ac_optarg=yes ;; - esac - eval "with_$ac_package='$ac_optarg'" ;; - - -without-* | --without-*) - ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null && - { echo "$as_me: error: invalid package name: $ac_package" >&2 - { (exit 1); exit 1; }; } - ac_package=`echo $ac_package | sed 's/-/_/g'` - eval "with_$ac_package=no" ;; - - --x) - # Obsolete; use --with-x. - with_x=yes ;; - - -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ - | --x-incl | --x-inc | --x-in | --x-i) - ac_prev=x_includes ;; - -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ - | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) - x_includes=$ac_optarg ;; - - -x-libraries | --x-libraries | --x-librarie | --x-librari \ - | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) - ac_prev=x_libraries ;; - -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ - | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) - x_libraries=$ac_optarg ;; - - -*) { echo "$as_me: error: unrecognized option: $ac_option -Try \`$0 --help' for more information." >&2 - { (exit 1); exit 1; }; } - ;; - - *=*) - ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` - # Reject names that are not valid shell variable names. - expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null && - { echo "$as_me: error: invalid variable name: $ac_envvar" >&2 - { (exit 1); exit 1; }; } - ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` - eval "$ac_envvar='$ac_optarg'" - export $ac_envvar ;; - - *) - # FIXME: should be removed in autoconf 3.0. - echo "$as_me: WARNING: you should use --build, --host, --target" >&2 - expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && - echo "$as_me: WARNING: invalid host type: $ac_option" >&2 - : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option} - ;; - - esac -done - -if test -n "$ac_prev"; then - ac_option=--`echo $ac_prev | sed 's/_/-/g'` - { echo "$as_me: error: missing argument to $ac_option" >&2 - { (exit 1); exit 1; }; } -fi - -# Be sure to have absolute paths. -for ac_var in exec_prefix prefix -do - eval ac_val=$`echo $ac_var` - case $ac_val in - [\\/$]* | ?:[\\/]* | NONE | '' ) ;; - *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 - { (exit 1); exit 1; }; };; - esac -done - -# Be sure to have absolute paths. -for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \ - localstatedir libdir includedir oldincludedir infodir mandir -do - eval ac_val=$`echo $ac_var` - case $ac_val in - [\\/$]* | ?:[\\/]* ) ;; - *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 - { (exit 1); exit 1; }; };; - esac -done - -# There might be people who depend on the old broken behavior: `$host' -# used to hold the argument of --host etc. -# FIXME: To remove some day. -build=$build_alias -host=$host_alias -target=$target_alias - -# FIXME: To remove some day. -if test "x$host_alias" != x; then - if test "x$build_alias" = x; then - cross_compiling=maybe - echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host. - If a cross compiler is detected then cross compile mode will be used." >&2 - elif test "x$build_alias" != "x$host_alias"; then - cross_compiling=yes - fi -fi - -ac_tool_prefix= -test -n "$host_alias" && ac_tool_prefix=$host_alias- - -test "$silent" = yes && exec 6>/dev/null - - -# Find the source files, if location was not specified. -if test -z "$srcdir"; then - ac_srcdir_defaulted=yes - # Try the directory containing this script, then its parent. - ac_confdir=`(dirname "$0") 2>/dev/null || -$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$0" : 'X\(//\)[^/]' \| \ - X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || -echo X"$0" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X\(\/\/\)[^/].*/{ s//\1/; q; } - /^X\(\/\/\)$/{ s//\1/; q; } - /^X\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` - srcdir=$ac_confdir - if test ! -r $srcdir/$ac_unique_file; then - srcdir=.. - fi -else - ac_srcdir_defaulted=no -fi -if test ! -r $srcdir/$ac_unique_file; then - if test "$ac_srcdir_defaulted" = yes; then - { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2 - { (exit 1); exit 1; }; } - else - { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 - { (exit 1); exit 1; }; } - fi -fi -(cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null || - { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2 - { (exit 1); exit 1; }; } -srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'` -ac_env_build_alias_set=${build_alias+set} -ac_env_build_alias_value=$build_alias -ac_cv_env_build_alias_set=${build_alias+set} -ac_cv_env_build_alias_value=$build_alias -ac_env_host_alias_set=${host_alias+set} -ac_env_host_alias_value=$host_alias -ac_cv_env_host_alias_set=${host_alias+set} -ac_cv_env_host_alias_value=$host_alias -ac_env_target_alias_set=${target_alias+set} -ac_env_target_alias_value=$target_alias -ac_cv_env_target_alias_set=${target_alias+set} -ac_cv_env_target_alias_value=$target_alias -ac_env_CC_set=${CC+set} -ac_env_CC_value=$CC -ac_cv_env_CC_set=${CC+set} -ac_cv_env_CC_value=$CC -ac_env_CFLAGS_set=${CFLAGS+set} -ac_env_CFLAGS_value=$CFLAGS -ac_cv_env_CFLAGS_set=${CFLAGS+set} -ac_cv_env_CFLAGS_value=$CFLAGS -ac_env_LDFLAGS_set=${LDFLAGS+set} -ac_env_LDFLAGS_value=$LDFLAGS -ac_cv_env_LDFLAGS_set=${LDFLAGS+set} -ac_cv_env_LDFLAGS_value=$LDFLAGS -ac_env_CPPFLAGS_set=${CPPFLAGS+set} -ac_env_CPPFLAGS_value=$CPPFLAGS -ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set} -ac_cv_env_CPPFLAGS_value=$CPPFLAGS -ac_env_CPP_set=${CPP+set} -ac_env_CPP_value=$CPP -ac_cv_env_CPP_set=${CPP+set} -ac_cv_env_CPP_value=$CPP - -# -# Report the --help message. -# -if test "$ac_init_help" = "long"; then - # Omit some internal or obsolete options to make the list less imposing. - # This message is too long to be a string in the A/UX 3.1 sh. - cat <<_ACEOF -\`configure' configures tls 1.6.7 to adapt to many kinds of systems. - -Usage: $0 [OPTION]... [VAR=VALUE]... - -To assign environment variables (e.g., CC, CFLAGS...), specify them as -VAR=VALUE. See below for descriptions of some of the useful variables. - -Defaults for the options are specified in brackets. - -Configuration: - -h, --help display this help and exit - --help=short display options specific to this package - --help=recursive display the short help of all the included packages - -V, --version display version information and exit - -q, --quiet, --silent do not print \`checking...' messages - --cache-file=FILE cache test results in FILE [disabled] - -C, --config-cache alias for \`--cache-file=config.cache' - -n, --no-create do not create output files - --srcdir=DIR find the sources in DIR [configure dir or \`..'] - -_ACEOF - - cat <<_ACEOF -Installation directories: - --prefix=PREFIX install architecture-independent files in PREFIX - [$ac_default_prefix] - --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX - [PREFIX] - -By default, \`make install' will install all the files in -\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify -an installation prefix other than \`$ac_default_prefix' using \`--prefix', -for instance \`--prefix=\$HOME'. - -For better control, use the options below. - -Fine tuning of the installation directories: - --bindir=DIR user executables [EPREFIX/bin] - --sbindir=DIR system admin executables [EPREFIX/sbin] - --libexecdir=DIR program executables [EPREFIX/libexec] - --datadir=DIR read-only architecture-independent data [PREFIX/share] - --sysconfdir=DIR read-only single-machine data [PREFIX/etc] - --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] - --localstatedir=DIR modifiable single-machine data [PREFIX/var] - --libdir=DIR object code libraries [EPREFIX/lib] - --includedir=DIR C header files [PREFIX/include] - --oldincludedir=DIR C header files for non-gcc [/usr/include] - --infodir=DIR info documentation [PREFIX/info] - --mandir=DIR man documentation [PREFIX/man] -_ACEOF - - cat <<\_ACEOF -_ACEOF -fi - -if test -n "$ac_init_help"; then - case $ac_init_help in - short | recursive ) echo "Configuration of tls 1.6.7:";; - esac - cat <<\_ACEOF - -Optional Features: - --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) - --enable-FEATURE[=ARG] include FEATURE [ARG=yes] - --enable-threads build with threads - --enable-shared build and link with shared libraries (default: on) - --enable-64bit enable 64bit support (default: off) - --enable-64bit-vis enable 64bit Sparc VIS support (default: off) - --disable-rpath disable rpath support (default: on) - --enable-wince enable Win/CE support (where applicable) - --enable-load allow dynamic loading and "load" command (default: - on) - --enable-symbols build with debugging symbols (default: off) - --enable-bsafe Use RSA BSAFE SSL-C libs. Default is to use OpenSSL libs - --enable-patents Use patented code. Default is enabled - -Optional Packages: - --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] - --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) - --with-tcl directory containing tcl configuration - (tclConfig.sh) - --with-tclinclude directory containing the public Tcl header files - --with-celib=DIR use Windows/CE support library from DIR - --with-ssl-dir=DIR SSL root directory - --with-gcclib link with libgcc to resolve symbols in a gcc-built openssl library - -Some influential environment variables: - CC C compiler command - CFLAGS C compiler flags - LDFLAGS linker flags, e.g. -L if you have libraries in a - nonstandard directory - CPPFLAGS C/C++ preprocessor flags, e.g. -I if you have - headers in a nonstandard directory - CPP C preprocessor - -Use these variables to override the choices made by `configure' or to help -it to find libraries and programs with nonstandard names/locations. - -_ACEOF -fi - -if test "$ac_init_help" = "recursive"; then - # If there are subdirs, report their specific --help. - ac_popdir=`pwd` - for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue - test -d $ac_dir || continue - ac_builddir=. - -if test "$ac_dir" != .; then - ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` - # A "../" for each directory in $ac_dir_suffix. - ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` -else - ac_dir_suffix= ac_top_builddir= -fi - -case $srcdir in - .) # No --srcdir option. We are building in place. - ac_srcdir=. - if test -z "$ac_top_builddir"; then - ac_top_srcdir=. - else - ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` - fi ;; - [\\/]* | ?:[\\/]* ) # Absolute path. - ac_srcdir=$srcdir$ac_dir_suffix; - ac_top_srcdir=$srcdir ;; - *) # Relative path. - ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix - ac_top_srcdir=$ac_top_builddir$srcdir ;; -esac - -# Do not use `cd foo && pwd` to compute absolute paths, because -# the directories may not exist. -case `pwd` in -.) ac_abs_builddir="$ac_dir";; -*) - case "$ac_dir" in - .) ac_abs_builddir=`pwd`;; - [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; - *) ac_abs_builddir=`pwd`/"$ac_dir";; - esac;; -esac -case $ac_abs_builddir in -.) ac_abs_top_builddir=${ac_top_builddir}.;; -*) - case ${ac_top_builddir}. in - .) ac_abs_top_builddir=$ac_abs_builddir;; - [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; - *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; - esac;; -esac -case $ac_abs_builddir in -.) ac_abs_srcdir=$ac_srcdir;; -*) - case $ac_srcdir in - .) ac_abs_srcdir=$ac_abs_builddir;; - [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; - *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; - esac;; -esac -case $ac_abs_builddir in -.) ac_abs_top_srcdir=$ac_top_srcdir;; -*) - case $ac_top_srcdir in - .) ac_abs_top_srcdir=$ac_abs_builddir;; - [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; - *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; - esac;; -esac - - cd $ac_dir - # Check for guested configure; otherwise get Cygnus style configure. - if test -f $ac_srcdir/configure.gnu; then - echo - $SHELL $ac_srcdir/configure.gnu --help=recursive - elif test -f $ac_srcdir/configure; then - echo - $SHELL $ac_srcdir/configure --help=recursive - elif test -f $ac_srcdir/configure.ac || - test -f $ac_srcdir/configure.in; then - echo - $ac_configure --help - else - echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 - fi - cd $ac_popdir - done -fi - -test -n "$ac_init_help" && exit 0 -if $ac_init_version; then - cat <<\_ACEOF -tls configure 1.6.7 -generated by GNU Autoconf 2.59 - -Copyright (C) 2003 Free Software Foundation, Inc. -This configure script is free software; the Free Software Foundation -gives unlimited permission to copy, distribute and modify it. -_ACEOF - exit 0 -fi -exec 5>config.log -cat >&5 <<_ACEOF -This file contains any messages produced by compilers while -running configure, to aid debugging if configure makes a mistake. - -It was created by tls $as_me 1.6.7, which was -generated by GNU Autoconf 2.59. Invocation command line was - - $ $0 $@ - -_ACEOF -{ -cat <<_ASUNAME -## --------- ## -## Platform. ## -## --------- ## - -hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` -uname -m = `(uname -m) 2>/dev/null || echo unknown` -uname -r = `(uname -r) 2>/dev/null || echo unknown` -uname -s = `(uname -s) 2>/dev/null || echo unknown` -uname -v = `(uname -v) 2>/dev/null || echo unknown` - -/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` -/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` - -/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` -/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` -/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` -hostinfo = `(hostinfo) 2>/dev/null || echo unknown` -/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` -/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` -/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` - -_ASUNAME - -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - echo "PATH: $as_dir" -done - -} >&5 - -cat >&5 <<_ACEOF - - -## ----------- ## -## Core tests. ## -## ----------- ## - -_ACEOF - - -# Keep a trace of the command line. -# Strip out --no-create and --no-recursion so they do not pile up. -# Strip out --silent because we don't want to record it for future runs. -# Also quote any args containing shell meta-characters. -# Make two passes to allow for proper duplicate-argument suppression. -ac_configure_args= -ac_configure_args0= -ac_configure_args1= -ac_sep= -ac_must_keep_next=false -for ac_pass in 1 2 -do - for ac_arg - do - case $ac_arg in - -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil) - continue ;; - *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) - ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; - esac - case $ac_pass in - 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;; - 2) - ac_configure_args1="$ac_configure_args1 '$ac_arg'" - if test $ac_must_keep_next = true; then - ac_must_keep_next=false # Got value, back to normal. - else - case $ac_arg in - *=* | --config-cache | -C | -disable-* | --disable-* \ - | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ - | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ - | -with-* | --with-* | -without-* | --without-* | --x) - case "$ac_configure_args0 " in - "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; - esac - ;; - -* ) ac_must_keep_next=true ;; - esac - fi - ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'" - # Get rid of the leading space. - ac_sep=" " - ;; - esac - done -done -$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; } -$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; } - -# When interrupted or exit'd, cleanup temporary files, and complete -# config.log. We remove comments because anyway the quotes in there -# would cause problems or look ugly. -# WARNING: Be sure not to use single quotes in there, as some shells, -# such as our DU 5.0 friend, will then `close' the trap. -trap 'exit_status=$? - # Save into config.log some information that might help in debugging. - { - echo - - cat <<\_ASBOX -## ---------------- ## -## Cache variables. ## -## ---------------- ## -_ASBOX - echo - # The following way of writing the cache mishandles newlines in values, -{ - (set) 2>&1 | - case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in - *ac_space=\ *) - sed -n \ - "s/'"'"'/'"'"'\\\\'"'"''"'"'/g; - s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p" - ;; - *) - sed -n \ - "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" - ;; - esac; -} - echo - - cat <<\_ASBOX -## ----------------- ## -## Output variables. ## -## ----------------- ## -_ASBOX - echo - for ac_var in $ac_subst_vars - do - eval ac_val=$`echo $ac_var` - echo "$ac_var='"'"'$ac_val'"'"'" - done | sort - echo - - if test -n "$ac_subst_files"; then - cat <<\_ASBOX -## ------------- ## -## Output files. ## -## ------------- ## -_ASBOX - echo - for ac_var in $ac_subst_files - do - eval ac_val=$`echo $ac_var` - echo "$ac_var='"'"'$ac_val'"'"'" - done | sort - echo - fi - - if test -s confdefs.h; then - cat <<\_ASBOX -## ----------- ## -## confdefs.h. ## -## ----------- ## -_ASBOX - echo - sed "/^$/d" confdefs.h | sort - echo - fi - test "$ac_signal" != 0 && - echo "$as_me: caught signal $ac_signal" - echo "$as_me: exit $exit_status" - } >&5 - rm -f core *.core && - rm -rf conftest* confdefs* conf$$* $ac_clean_files && - exit $exit_status - ' 0 -for ac_signal in 1 2 13 15; do - trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal -done -ac_signal=0 - -# confdefs.h avoids OS command line length limits that DEFS can exceed. -rm -rf conftest* confdefs.h -# AIX cpp loses on an empty file, so make sure it contains at least a newline. -echo >confdefs.h - -# Predefined preprocessor variables. - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_NAME "$PACKAGE_NAME" -_ACEOF - - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_TARNAME "$PACKAGE_TARNAME" -_ACEOF - - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_VERSION "$PACKAGE_VERSION" -_ACEOF - - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_STRING "$PACKAGE_STRING" -_ACEOF - - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" -_ACEOF - - -# Let the site file select an alternate cache file if it wants to. -# Prefer explicitly selected file to automatically selected ones. -if test -z "$CONFIG_SITE"; then - if test "x$prefix" != xNONE; then - CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" - else - CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" - fi -fi -for ac_site_file in $CONFIG_SITE; do - if test -r "$ac_site_file"; then - { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5 -echo "$as_me: loading site script $ac_site_file" >&6;} - sed 's/^/| /' "$ac_site_file" >&5 - . "$ac_site_file" - fi -done - -if test -r "$cache_file"; then - # Some versions of bash will fail to source /dev/null (special - # files actually), so we avoid doing that. - if test -f "$cache_file"; then - { echo "$as_me:$LINENO: loading cache $cache_file" >&5 -echo "$as_me: loading cache $cache_file" >&6;} - case $cache_file in - [\\/]* | ?:[\\/]* ) . $cache_file;; - *) . ./$cache_file;; - esac - fi -else - { echo "$as_me:$LINENO: creating cache $cache_file" >&5 -echo "$as_me: creating cache $cache_file" >&6;} - >$cache_file -fi - -# Check that the precious variables saved in the cache have kept the same -# value. -ac_cache_corrupted=false -for ac_var in `(set) 2>&1 | - sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do - eval ac_old_set=\$ac_cv_env_${ac_var}_set - eval ac_new_set=\$ac_env_${ac_var}_set - eval ac_old_val="\$ac_cv_env_${ac_var}_value" - eval ac_new_val="\$ac_env_${ac_var}_value" - case $ac_old_set,$ac_new_set in - set,) - { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 -echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} - ac_cache_corrupted=: ;; - ,set) - { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5 -echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} - ac_cache_corrupted=: ;; - ,);; - *) - if test "x$ac_old_val" != "x$ac_new_val"; then - { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5 -echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} - { echo "$as_me:$LINENO: former value: $ac_old_val" >&5 -echo "$as_me: former value: $ac_old_val" >&2;} - { echo "$as_me:$LINENO: current value: $ac_new_val" >&5 -echo "$as_me: current value: $ac_new_val" >&2;} - ac_cache_corrupted=: - fi;; - esac - # Pass precious variables to config.status. - if test "$ac_new_set" = set; then - case $ac_new_val in - *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) - ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; - *) ac_arg=$ac_var=$ac_new_val ;; - esac - case " $ac_configure_args " in - *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. - *) ac_configure_args="$ac_configure_args '$ac_arg'" ;; - esac - fi -done -if $ac_cache_corrupted; then - { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5 -echo "$as_me: error: changes in the environment can compromise the build" >&2;} - { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5 -echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;} - { (exit 1); exit 1; }; } -fi - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - # TEA extensions pass this us the version of TEA they think they - # are compatible with. - TEA_VERSION="3.8" - - echo "$as_me:$LINENO: checking for correct TEA configuration" >&5 -echo $ECHO_N "checking for correct TEA configuration... $ECHO_C" >&6 - if test x"${PACKAGE_NAME}" = x ; then - { { echo "$as_me:$LINENO: error: -The PACKAGE_NAME variable must be defined by your TEA configure.in" >&5 -echo "$as_me: error: -The PACKAGE_NAME variable must be defined by your TEA configure.in" >&2;} - { (exit 1); exit 1; }; } - fi - if test x"3.8" = x ; then - { { echo "$as_me:$LINENO: error: -TEA version not specified." >&5 -echo "$as_me: error: -TEA version not specified." >&2;} - { (exit 1); exit 1; }; } - elif test "3.8" != "${TEA_VERSION}" ; then - echo "$as_me:$LINENO: result: warning: requested TEA version \"3.8\", have \"${TEA_VERSION}\"" >&5 -echo "${ECHO_T}warning: requested TEA version \"3.8\", have \"${TEA_VERSION}\"" >&6 - else - echo "$as_me:$LINENO: result: ok (TEA ${TEA_VERSION})" >&5 -echo "${ECHO_T}ok (TEA ${TEA_VERSION})" >&6 - fi - case "`uname -s`" in - *win32*|*WIN32*|*MINGW32_*) - # Extract the first word of "cygpath", so it can be a program name with args. -set dummy cygpath; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_CYGPATH+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$CYGPATH"; then - ac_cv_prog_CYGPATH="$CYGPATH" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_CYGPATH="cygpath -w" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - - test -z "$ac_cv_prog_CYGPATH" && ac_cv_prog_CYGPATH="echo" -fi -fi -CYGPATH=$ac_cv_prog_CYGPATH -if test -n "$CYGPATH"; then - echo "$as_me:$LINENO: result: $CYGPATH" >&5 -echo "${ECHO_T}$CYGPATH" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - - EXEEXT=".exe" - if [ -z "${TEA_PLATFORM}" ]; then - TEA_PLATFORM="windows" - fi - ;; - *CYGWIN_*) - CYGPATH=echo - EXEEXT=".exe" - # TEA_PLATFORM is determined later - ;; - *) - CYGPATH=echo - EXEEXT="" - if [ -z "${TEA_PLATFORM}" ]; then - TEA_PLATFORM="unix" - fi - ;; - esac - - # Check if exec_prefix is set. If not use fall back to prefix. - # Note when adjusted, so that TEA_PREFIX can correct for this. - # This is needed for recursive configures, since autoconf propagates - # $prefix, but not $exec_prefix (doh!). - if test x$exec_prefix = xNONE ; then - exec_prefix_default=yes - exec_prefix=$prefix - fi - - - - - # This package name must be replaced statically for AC_SUBST to work - - # Substitute STUB_LIB_FILE in case package creates a stub library too. - - - # We AC_SUBST these here to ensure they are subst'ed, - # in case the user doesn't call TEA_ADD_... - - - - - - - - - -ac_aux_dir= -for ac_dir in tclconfig $srcdir/tclconfig; do - if test -f $ac_dir/install-sh; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/install-sh -c" - break - elif test -f $ac_dir/install.sh; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/install.sh -c" - break - elif test -f $ac_dir/shtool; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/shtool install -c" - break - fi -done -if test -z "$ac_aux_dir"; then - { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in tclconfig $srcdir/tclconfig" >&5 -echo "$as_me: error: cannot find install-sh or install.sh in tclconfig $srcdir/tclconfig" >&2;} - { (exit 1); exit 1; }; } -fi -ac_config_guess="$SHELL $ac_aux_dir/config.guess" -ac_config_sub="$SHELL $ac_aux_dir/config.sub" -ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure. - - -#-------------------------------------------------------------------- -# Load the tclConfig.sh file -#-------------------------------------------------------------------- - - - - # - # Ok, lets find the tcl configuration - # First, look for one uninstalled. - # the alternative search directory is invoked by --with-tcl - # - - if test x"${no_tcl}" = x ; then - # we reset no_tcl in case something fails here - no_tcl=true - -# Check whether --with-tcl or --without-tcl was given. -if test "${with_tcl+set}" = set; then - withval="$with_tcl" - with_tclconfig="${withval}" -fi; - echo "$as_me:$LINENO: checking for Tcl configuration" >&5 -echo $ECHO_N "checking for Tcl configuration... $ECHO_C" >&6 - if test "${ac_cv_c_tclconfig+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - - - # First check to see if --with-tcl was specified. - if test x"${with_tclconfig}" != x ; then - case "${with_tclconfig}" in - */tclConfig.sh ) - if test -f "${with_tclconfig}"; then - { echo "$as_me:$LINENO: WARNING: --with-tcl argument should refer to directory containing tclConfig.sh, not to tclConfig.sh itself" >&5 -echo "$as_me: WARNING: --with-tcl argument should refer to directory containing tclConfig.sh, not to tclConfig.sh itself" >&2;} - with_tclconfig="`echo "${with_tclconfig}" | sed 's!/tclConfig\.sh$!!'`" - fi ;; - esac - if test -f "${with_tclconfig}/tclConfig.sh" ; then - ac_cv_c_tclconfig="`(cd "${with_tclconfig}"; pwd)`" - else - { { echo "$as_me:$LINENO: error: ${with_tclconfig} directory doesn't contain tclConfig.sh" >&5 -echo "$as_me: error: ${with_tclconfig} directory doesn't contain tclConfig.sh" >&2;} - { (exit 1); exit 1; }; } - fi - fi - - # then check for a private Tcl installation - if test x"${ac_cv_c_tclconfig}" = x ; then - for i in \ - ../tcl \ - `ls -dr ../tcl[8-9].[0-9].[0-9]* 2>/dev/null` \ - `ls -dr ../tcl[8-9].[0-9] 2>/dev/null` \ - `ls -dr ../tcl[8-9].[0-9]* 2>/dev/null` \ - ../../tcl \ - `ls -dr ../../tcl[8-9].[0-9].[0-9]* 2>/dev/null` \ - `ls -dr ../../tcl[8-9].[0-9] 2>/dev/null` \ - `ls -dr ../../tcl[8-9].[0-9]* 2>/dev/null` \ - ../../../tcl \ - `ls -dr ../../../tcl[8-9].[0-9].[0-9]* 2>/dev/null` \ - `ls -dr ../../../tcl[8-9].[0-9] 2>/dev/null` \ - `ls -dr ../../../tcl[8-9].[0-9]* 2>/dev/null` ; do - if test "${TEA_PLATFORM}" = "windows" \ - -a -f "$i/win/tclConfig.sh" ; then - ac_cv_c_tclconfig="`(cd $i/win; pwd)`" - break - fi - if test -f "$i/unix/tclConfig.sh" ; then - ac_cv_c_tclconfig="`(cd $i/unix; pwd)`" - break - fi - done - fi - - # on Darwin, check in Framework installation locations - if test "`uname -s`" = "Darwin" -a x"${ac_cv_c_tclconfig}" = x ; then - for i in `ls -d ~/Library/Frameworks 2>/dev/null` \ - `ls -d /Library/Frameworks 2>/dev/null` \ - `ls -d /Network/Library/Frameworks 2>/dev/null` \ - `ls -d /System/Library/Frameworks 2>/dev/null` \ - ; do - if test -f "$i/Tcl.framework/tclConfig.sh" ; then - ac_cv_c_tclconfig="`(cd $i/Tcl.framework; pwd)`" - break - fi - done - fi - - # TEA specific: on Windows, check in common installation locations - if test "${TEA_PLATFORM}" = "windows" \ - -a x"${ac_cv_c_tclconfig}" = x ; then - for i in `ls -d C:/Tcl/lib 2>/dev/null` \ - `ls -d C:/Progra~1/Tcl/lib 2>/dev/null` \ - ; do - if test -f "$i/tclConfig.sh" ; then - ac_cv_c_tclconfig="`(cd $i; pwd)`" - break - fi - done - fi - - # check in a few common install locations - if test x"${ac_cv_c_tclconfig}" = x ; then - for i in `ls -d ${libdir} 2>/dev/null` \ - `ls -d ${exec_prefix}/lib 2>/dev/null` \ - `ls -d ${prefix}/lib 2>/dev/null` \ - `ls -d /usr/local/lib 2>/dev/null` \ - `ls -d /usr/contrib/lib 2>/dev/null` \ - `ls -d /usr/lib 2>/dev/null` \ - ; do - if test -f "$i/tclConfig.sh" ; then - ac_cv_c_tclconfig="`(cd $i; pwd)`" - break - fi - done - fi - - # check in a few other private locations - if test x"${ac_cv_c_tclconfig}" = x ; then - for i in \ - ${srcdir}/../tcl \ - `ls -dr ${srcdir}/../tcl[8-9].[0-9].[0-9]* 2>/dev/null` \ - `ls -dr ${srcdir}/../tcl[8-9].[0-9] 2>/dev/null` \ - `ls -dr ${srcdir}/../tcl[8-9].[0-9]* 2>/dev/null` ; do - if test "${TEA_PLATFORM}" = "windows" \ - -a -f "$i/win/tclConfig.sh" ; then - ac_cv_c_tclconfig="`(cd $i/win; pwd)`" - break - fi - if test -f "$i/unix/tclConfig.sh" ; then - ac_cv_c_tclconfig="`(cd $i/unix; pwd)`" - break - fi - done - fi - -fi - - - if test x"${ac_cv_c_tclconfig}" = x ; then - TCL_BIN_DIR="# no Tcl configs found" - { { echo "$as_me:$LINENO: error: Can't find Tcl configuration definitions" >&5 -echo "$as_me: error: Can't find Tcl configuration definitions" >&2;} - { (exit 1); exit 1; }; } - else - no_tcl= - TCL_BIN_DIR="${ac_cv_c_tclconfig}" - echo "$as_me:$LINENO: result: found ${TCL_BIN_DIR}/tclConfig.sh" >&5 -echo "${ECHO_T}found ${TCL_BIN_DIR}/tclConfig.sh" >&6 - fi - fi - - - echo "$as_me:$LINENO: checking for existence of ${TCL_BIN_DIR}/tclConfig.sh" >&5 -echo $ECHO_N "checking for existence of ${TCL_BIN_DIR}/tclConfig.sh... $ECHO_C" >&6 - - if test -f "${TCL_BIN_DIR}/tclConfig.sh" ; then - echo "$as_me:$LINENO: result: loading" >&5 -echo "${ECHO_T}loading" >&6 - . "${TCL_BIN_DIR}/tclConfig.sh" - else - echo "$as_me:$LINENO: result: could not find ${TCL_BIN_DIR}/tclConfig.sh" >&5 -echo "${ECHO_T}could not find ${TCL_BIN_DIR}/tclConfig.sh" >&6 - fi - - # eval is required to do the TCL_DBGX substitution - eval "TCL_LIB_FILE=\"${TCL_LIB_FILE}\"" - eval "TCL_STUB_LIB_FILE=\"${TCL_STUB_LIB_FILE}\"" - - # If the TCL_BIN_DIR is the build directory (not the install directory), - # then set the common variable name to the value of the build variables. - # For example, the variable TCL_LIB_SPEC will be set to the value - # of TCL_BUILD_LIB_SPEC. An extension should make use of TCL_LIB_SPEC - # instead of TCL_BUILD_LIB_SPEC since it will work with both an - # installed and uninstalled version of Tcl. - if test -f "${TCL_BIN_DIR}/Makefile" ; then - TCL_LIB_SPEC="${TCL_BUILD_LIB_SPEC}" - TCL_STUB_LIB_SPEC="${TCL_BUILD_STUB_LIB_SPEC}" - TCL_STUB_LIB_PATH="${TCL_BUILD_STUB_LIB_PATH}" - elif test "`uname -s`" = "Darwin"; then - # If Tcl was built as a framework, attempt to use the libraries - # from the framework at the given location so that linking works - # against Tcl.framework installed in an arbitrary location. - case ${TCL_DEFS} in - *TCL_FRAMEWORK*) - if test -f "${TCL_BIN_DIR}/${TCL_LIB_FILE}"; then - for i in "`cd "${TCL_BIN_DIR}"; pwd`" \ - "`cd "${TCL_BIN_DIR}"/../..; pwd`"; do - if test "`basename "$i"`" = "${TCL_LIB_FILE}.framework"; then - TCL_LIB_SPEC="-F`dirname "$i" | sed -e 's/ /\\\\ /g'` -framework ${TCL_LIB_FILE}" - break - fi - done - fi - if test -f "${TCL_BIN_DIR}/${TCL_STUB_LIB_FILE}"; then - TCL_STUB_LIB_SPEC="-L`echo "${TCL_BIN_DIR}" | sed -e 's/ /\\\\ /g'` ${TCL_STUB_LIB_FLAG}" - TCL_STUB_LIB_PATH="${TCL_BIN_DIR}/${TCL_STUB_LIB_FILE}" - fi - ;; - esac - fi - - # eval is required to do the TCL_DBGX substitution - eval "TCL_LIB_FLAG=\"${TCL_LIB_FLAG}\"" - eval "TCL_LIB_SPEC=\"${TCL_LIB_SPEC}\"" - eval "TCL_STUB_LIB_FLAG=\"${TCL_STUB_LIB_FLAG}\"" - eval "TCL_STUB_LIB_SPEC=\"${TCL_STUB_LIB_SPEC}\"" - - - - - - - - - - - - - - - case "`uname -s`" in - *CYGWIN_*) - echo "$as_me:$LINENO: checking for cygwin variant" >&5 -echo $ECHO_N "checking for cygwin variant... $ECHO_C" >&6 - case ${TCL_EXTRA_CFLAGS} in - *-mwin32*|*-mno-cygwin*) - if [ -z "${TEA_PLATFORM}" ]; then - TEA_PLATFORM="windows" - fi - CFLAGS="$CFLAGS -mwin32" - echo "$as_me:$LINENO: result: win32" >&5 -echo "${ECHO_T}win32" >&6 - ;; - *) - if [ -z "${TEA_PLATFORM}" ]; then - TEA_PLATFORM="unix" - fi - echo "$as_me:$LINENO: result: unix" >&5 -echo "${ECHO_T}unix" >&6 - ;; - esac - EXEEXT=".exe" - ;; - *) - ;; - esac - - # TEA specific: - - - - - - - -#----------------------------------------------------------------------- -# Handle the --prefix=... option by defaulting to what Tcl gave. -# Must be called after TEA_LOAD_TCLCONFIG and before TEA_SETUP_COMPILER. -#----------------------------------------------------------------------- - - - if test "${prefix}" = "NONE"; then - prefix_default=yes - if test x"${TCL_PREFIX}" != x; then - { echo "$as_me:$LINENO: --prefix defaulting to TCL_PREFIX ${TCL_PREFIX}" >&5 -echo "$as_me: --prefix defaulting to TCL_PREFIX ${TCL_PREFIX}" >&6;} - prefix=${TCL_PREFIX} - else - { echo "$as_me:$LINENO: --prefix defaulting to /usr/local" >&5 -echo "$as_me: --prefix defaulting to /usr/local" >&6;} - prefix=/usr/local - fi - fi - if test "${exec_prefix}" = "NONE" -a x"${prefix_default}" = x"yes" \ - -o x"${exec_prefix_default}" = x"yes" ; then - if test x"${TCL_EXEC_PREFIX}" != x; then - { echo "$as_me:$LINENO: --exec-prefix defaulting to TCL_EXEC_PREFIX ${TCL_EXEC_PREFIX}" >&5 -echo "$as_me: --exec-prefix defaulting to TCL_EXEC_PREFIX ${TCL_EXEC_PREFIX}" >&6;} - exec_prefix=${TCL_EXEC_PREFIX} - else - { echo "$as_me:$LINENO: --exec-prefix defaulting to ${prefix}" >&5 -echo "$as_me: --exec-prefix defaulting to ${prefix}" >&6;} - exec_prefix=$prefix - fi - fi - - -#----------------------------------------------------------------------- -# Standard compiler checks. -# This sets up CC by using the CC env var, or looks for gcc otherwise. -# This also calls AC_PROG_CC, AC_PROG_INSTALL and a few others to create -# the basic setup necessary to compile executables. -#----------------------------------------------------------------------- - - - # Don't put any macros that use the compiler (e.g. AC_TRY_COMPILE) - # in this macro, they need to go into TEA_SETUP_COMPILER instead. - - # If the user did not set CFLAGS, set it now to keep - # the AC_PROG_CC macro from adding "-g -O2". - if test "${CFLAGS+set}" != "set" ; then - CFLAGS="" - fi - - ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. -set dummy ${ac_tool_prefix}gcc; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_CC="${ac_tool_prefix}gcc" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - echo "$as_me:$LINENO: result: $CC" >&5 -echo "${ECHO_T}$CC" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - -fi -if test -z "$ac_cv_prog_CC"; then - ac_ct_CC=$CC - # Extract the first word of "gcc", so it can be a program name with args. -set dummy gcc; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_ac_ct_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_CC="gcc" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -fi -fi -ac_ct_CC=$ac_cv_prog_ac_ct_CC -if test -n "$ac_ct_CC"; then - echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 -echo "${ECHO_T}$ac_ct_CC" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - - CC=$ac_ct_CC -else - CC="$ac_cv_prog_CC" -fi - -if test -z "$CC"; then - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. -set dummy ${ac_tool_prefix}cc; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_CC="${ac_tool_prefix}cc" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - echo "$as_me:$LINENO: result: $CC" >&5 -echo "${ECHO_T}$CC" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - -fi -if test -z "$ac_cv_prog_CC"; then - ac_ct_CC=$CC - # Extract the first word of "cc", so it can be a program name with args. -set dummy cc; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_ac_ct_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_CC="cc" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -fi -fi -ac_ct_CC=$ac_cv_prog_ac_ct_CC -if test -n "$ac_ct_CC"; then - echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 -echo "${ECHO_T}$ac_ct_CC" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - - CC=$ac_ct_CC -else - CC="$ac_cv_prog_CC" -fi - -fi -if test -z "$CC"; then - # Extract the first word of "cc", so it can be a program name with args. -set dummy cc; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else - ac_prog_rejected=no -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then - ac_prog_rejected=yes - continue - fi - ac_cv_prog_CC="cc" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -if test $ac_prog_rejected = yes; then - # We found a bogon in the path, so make sure we never use it. - set dummy $ac_cv_prog_CC - shift - if test $# != 0; then - # We chose a different compiler from the bogus one. - # However, it has the same basename, so the bogon will be chosen - # first if we set CC to just the basename; use the full file name. - shift - ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" - fi -fi -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - echo "$as_me:$LINENO: result: $CC" >&5 -echo "${ECHO_T}$CC" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - -fi -if test -z "$CC"; then - if test -n "$ac_tool_prefix"; then - for ac_prog in cl - do - # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. -set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_CC="$ac_tool_prefix$ac_prog" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - echo "$as_me:$LINENO: result: $CC" >&5 -echo "${ECHO_T}$CC" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - - test -n "$CC" && break - done -fi -if test -z "$CC"; then - ac_ct_CC=$CC - for ac_prog in cl -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_ac_ct_CC+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_CC="$ac_prog" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -fi -fi -ac_ct_CC=$ac_cv_prog_ac_ct_CC -if test -n "$ac_ct_CC"; then - echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 -echo "${ECHO_T}$ac_ct_CC" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - - test -n "$ac_ct_CC" && break -done - - CC=$ac_ct_CC -fi - -fi - - -test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH -See \`config.log' for more details." >&5 -echo "$as_me: error: no acceptable C compiler found in \$PATH -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } - -# Provide some information about the compiler. -echo "$as_me:$LINENO:" \ - "checking for C compiler version" >&5 -ac_compiler=`set X $ac_compile; echo $2` -{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version &5\"") >&5 - (eval $ac_compiler --version &5) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } -{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v &5\"") >&5 - (eval $ac_compiler -v &5) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } -{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V &5\"") >&5 - (eval $ac_compiler -V &5) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } - -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -ac_clean_files_save=$ac_clean_files -ac_clean_files="$ac_clean_files a.out a.exe b.out" -# Try to create an executable without -o first, disregard a.out. -# It will help us diagnose broken compilers, and finding out an intuition -# of exeext. -echo "$as_me:$LINENO: checking for C compiler default output file name" >&5 -echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6 -ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` -if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5 - (eval $ac_link_default) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - # Find the output, starting from the most likely. This scheme is -# not robust to junk in `.', hence go to wildcards (a.*) only as a last -# resort. - -# Be careful to initialize this variable, since it used to be cached. -# Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile. -ac_cv_exeext= -# b.out is created by i960 compilers. -for ac_file in a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out -do - test -f "$ac_file" || continue - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) - ;; - conftest.$ac_ext ) - # This is the source file. - ;; - [ab].out ) - # We found the default executable, but exeext='' is most - # certainly right. - break;; - *.* ) - ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` - # FIXME: I believe we export ac_cv_exeext for Libtool, - # but it would be cool to find out if it's true. Does anybody - # maintain Libtool? --akim. - export ac_cv_exeext - break;; - * ) - break;; - esac -done -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -{ { echo "$as_me:$LINENO: error: C compiler cannot create executables -See \`config.log' for more details." >&5 -echo "$as_me: error: C compiler cannot create executables -See \`config.log' for more details." >&2;} - { (exit 77); exit 77; }; } -fi - -ac_exeext=$ac_cv_exeext -echo "$as_me:$LINENO: result: $ac_file" >&5 -echo "${ECHO_T}$ac_file" >&6 - -# Check the compiler produces executables we can run. If not, either -# the compiler is broken, or we cross compile. -echo "$as_me:$LINENO: checking whether the C compiler works" >&5 -echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6 -# FIXME: These cross compiler hacks should be removed for Autoconf 3.0 -# If not cross compiling, check that we can run a simple program. -if test "$cross_compiling" != yes; then - if { ac_try='./$ac_file' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - cross_compiling=no - else - if test "$cross_compiling" = maybe; then - cross_compiling=yes - else - { { echo "$as_me:$LINENO: error: cannot run C compiled programs. -If you meant to cross compile, use \`--host'. -See \`config.log' for more details." >&5 -echo "$as_me: error: cannot run C compiled programs. -If you meant to cross compile, use \`--host'. -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } - fi - fi -fi -echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 - -rm -f a.out a.exe conftest$ac_cv_exeext b.out -ac_clean_files=$ac_clean_files_save -# Check the compiler produces executables we can run. If not, either -# the compiler is broken, or we cross compile. -echo "$as_me:$LINENO: checking whether we are cross compiling" >&5 -echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6 -echo "$as_me:$LINENO: result: $cross_compiling" >&5 -echo "${ECHO_T}$cross_compiling" >&6 - -echo "$as_me:$LINENO: checking for suffix of executables" >&5 -echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6 -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - # If both `conftest.exe' and `conftest' are `present' (well, observable) -# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will -# work properly (i.e., refer to `conftest.exe'), while it won't with -# `rm'. -for ac_file in conftest.exe conftest conftest.*; do - test -f "$ac_file" || continue - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;; - *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` - export ac_cv_exeext - break;; - * ) break;; - esac -done -else - { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link -See \`config.log' for more details." >&5 -echo "$as_me: error: cannot compute suffix of executables: cannot compile and link -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } -fi - -rm -f conftest$ac_cv_exeext -echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5 -echo "${ECHO_T}$ac_cv_exeext" >&6 - -rm -f conftest.$ac_ext -EXEEXT=$ac_cv_exeext -ac_exeext=$EXEEXT -echo "$as_me:$LINENO: checking for suffix of object files" >&5 -echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6 -if test "${ac_cv_objext+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.o conftest.obj -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; then - for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg ) ;; - *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` - break;; - esac -done -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile -See \`config.log' for more details." >&5 -echo "$as_me: error: cannot compute suffix of object files: cannot compile -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } -fi - -rm -f conftest.$ac_cv_objext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $ac_cv_objext" >&5 -echo "${ECHO_T}$ac_cv_objext" >&6 -OBJEXT=$ac_cv_objext -ac_objext=$OBJEXT -echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 -echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6 -if test "${ac_cv_c_compiler_gnu+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ -#ifndef __GNUC__ - choke me -#endif - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_compiler_gnu=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_compiler_gnu=no -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -ac_cv_c_compiler_gnu=$ac_compiler_gnu - -fi -echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 -echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6 -GCC=`test $ac_compiler_gnu = yes && echo yes` -ac_test_CFLAGS=${CFLAGS+set} -ac_save_CFLAGS=$CFLAGS -CFLAGS="-g" -echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 -echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6 -if test "${ac_cv_prog_cc_g+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_prog_cc_g=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_prog_cc_g=no -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 -echo "${ECHO_T}$ac_cv_prog_cc_g" >&6 -if test "$ac_test_CFLAGS" = set; then - CFLAGS=$ac_save_CFLAGS -elif test $ac_cv_prog_cc_g = yes; then - if test "$GCC" = yes; then - CFLAGS="-g -O2" - else - CFLAGS="-g" - fi -else - if test "$GCC" = yes; then - CFLAGS="-O2" - else - CFLAGS= - fi -fi -echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5 -echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6 -if test "${ac_cv_prog_cc_stdc+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_cv_prog_cc_stdc=no -ac_save_CC=$CC -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -#include -#include -#include -/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ -struct buf { int x; }; -FILE * (*rcsopen) (struct buf *, struct stat *, int); -static char *e (p, i) - char **p; - int i; -{ - return p[i]; -} -static char *f (char * (*g) (char **, int), char **p, ...) -{ - char *s; - va_list v; - va_start (v,p); - s = g (p, va_arg (v,int)); - va_end (v); - return s; -} - -/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has - function prototypes and stuff, but not '\xHH' hex character constants. - These don't provoke an error unfortunately, instead are silently treated - as 'x'. The following induces an error, until -std1 is added to get - proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an - array size at least. It's necessary to write '\x00'==0 to get something - that's true only with -std1. */ -int osf4_cc_array ['\x00' == 0 ? 1 : -1]; - -int test (int i, double x); -struct s1 {int (*f) (int a);}; -struct s2 {int (*f) (double a);}; -int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); -int argc; -char **argv; -int -main () -{ -return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; - ; - return 0; -} -_ACEOF -# Don't try gcc -ansi; that turns off useful extensions and -# breaks some systems' header files. -# AIX -qlanglvl=ansi -# Ultrix and OSF/1 -std1 -# HP-UX 10.20 and later -Ae -# HP-UX older versions -Aa -D_HPUX_SOURCE -# SVR4 -Xc -D__EXTENSIONS__ -for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" -do - CC="$ac_save_CC $ac_arg" - rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_prog_cc_stdc=$ac_arg -break -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -fi -rm -f conftest.err conftest.$ac_objext -done -rm -f conftest.$ac_ext conftest.$ac_objext -CC=$ac_save_CC - -fi - -case "x$ac_cv_prog_cc_stdc" in - x|xno) - echo "$as_me:$LINENO: result: none needed" >&5 -echo "${ECHO_T}none needed" >&6 ;; - *) - echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5 -echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6 - CC="$CC $ac_cv_prog_cc_stdc" ;; -esac - -# Some people use a C++ compiler to compile C. Since we use `exit', -# in C++ we need to declare it. In case someone uses the same compiler -# for both compiling C and C++ we need to have the C++ compiler decide -# the declaration of exit, since it's the most demanding environment. -cat >conftest.$ac_ext <<_ACEOF -#ifndef __cplusplus - choke me -#endif -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - for ac_declaration in \ - '' \ - 'extern "C" void std::exit (int) throw (); using std::exit;' \ - 'extern "C" void std::exit (int); using std::exit;' \ - 'extern "C" void exit (int) throw ();' \ - 'extern "C" void exit (int);' \ - 'void exit (int);' -do - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_declaration -#include -int -main () -{ -exit (42); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - : -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -continue -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_declaration -int -main () -{ -exit (42); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - break -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -done -rm -f conftest* -if test -n "$ac_declaration"; then - echo '#ifdef __cplusplus' >>confdefs.h - echo $ac_declaration >>confdefs.h - echo '#endif' >>confdefs.h -fi - -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5 -echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6 -# On Suns, sometimes $CPP names a directory. -if test -n "$CPP" && test -d "$CPP"; then - CPP= -fi -if test -z "$CPP"; then - if test "${ac_cv_prog_CPP+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - # Double quotes because CPP needs to be expanded - for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" - do - ac_preproc_ok=false -for ac_c_preproc_warn_flag in '' yes -do - # Use a header file that comes with gcc, so configuring glibc - # with a fresh cross-compiler works. - # Prefer to if __STDC__ is defined, since - # exists even on freestanding compilers. - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. "Syntax error" is here to catch this case. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#ifdef __STDC__ -# include -#else -# include -#endif - Syntax error -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_c_preproc_warn_flag - ac_cpp_err=$ac_cpp_err$ac_c_werror_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - : -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - # Broken: fails on valid input. -continue -fi -rm -f conftest.err conftest.$ac_ext - - # OK, works on sane cases. Now check whether non-existent headers - # can be detected and how. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_c_preproc_warn_flag - ac_cpp_err=$ac_cpp_err$ac_c_werror_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - # Broken: success on invalid input. -continue -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - # Passes both tests. -ac_preproc_ok=: -break -fi -rm -f conftest.err conftest.$ac_ext - -done -# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.err conftest.$ac_ext -if $ac_preproc_ok; then - break -fi - - done - ac_cv_prog_CPP=$CPP - -fi - CPP=$ac_cv_prog_CPP -else - ac_cv_prog_CPP=$CPP -fi -echo "$as_me:$LINENO: result: $CPP" >&5 -echo "${ECHO_T}$CPP" >&6 -ac_preproc_ok=false -for ac_c_preproc_warn_flag in '' yes -do - # Use a header file that comes with gcc, so configuring glibc - # with a fresh cross-compiler works. - # Prefer to if __STDC__ is defined, since - # exists even on freestanding compilers. - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. "Syntax error" is here to catch this case. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#ifdef __STDC__ -# include -#else -# include -#endif - Syntax error -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_c_preproc_warn_flag - ac_cpp_err=$ac_cpp_err$ac_c_werror_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - : -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - # Broken: fails on valid input. -continue -fi -rm -f conftest.err conftest.$ac_ext - - # OK, works on sane cases. Now check whether non-existent headers - # can be detected and how. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_c_preproc_warn_flag - ac_cpp_err=$ac_cpp_err$ac_c_werror_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - # Broken: success on invalid input. -continue -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - # Passes both tests. -ac_preproc_ok=: -break -fi -rm -f conftest.err conftest.$ac_ext - -done -# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.err conftest.$ac_ext -if $ac_preproc_ok; then - : -else - { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check -See \`config.log' for more details." >&5 -echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check -See \`config.log' for more details." >&2;} - { (exit 1); exit 1; }; } -fi - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - - # Find a good install program. We prefer a C program (faster), -# so one script is as good as another. But avoid the broken or -# incompatible versions: -# SysV /etc/install, /usr/sbin/install -# SunOS /usr/etc/install -# IRIX /sbin/install -# AIX /bin/install -# AmigaOS /C/install, which installs bootblocks on floppy discs -# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag -# AFS /usr/afsws/bin/install, which mishandles nonexistent args -# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" -# OS/2's system install, which has a completely different semantic -# ./install, which can be erroneously created by make from ./install.sh. -echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 -echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6 -if test -z "$INSTALL"; then -if test "${ac_cv_path_install+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - # Account for people who put trailing slashes in PATH elements. -case $as_dir/ in - ./ | .// | /cC/* | \ - /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ - ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \ - /usr/ucb/* ) ;; - *) - # OSF1 and SCO ODT 3.0 have their own names for install. - # Don't use installbsd from OSF since it installs stuff as root - # by default. - for ac_prog in ginstall scoinst install; do - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then - if test $ac_prog = install && - grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then - # AIX install. It has an incompatible calling convention. - : - elif test $ac_prog = install && - grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then - # program-specific install script used by HP pwplus--don't use. - : - else - ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" - break 3 - fi - fi - done - done - ;; -esac -done - - -fi - if test "${ac_cv_path_install+set}" = set; then - INSTALL=$ac_cv_path_install - else - # As a last resort, use the slow shell script. We don't cache a - # path for INSTALL within a source directory, because that will - # break other packages using the cache if that directory is - # removed, or if the path is relative. - INSTALL=$ac_install_sh - fi -fi -echo "$as_me:$LINENO: result: $INSTALL" >&5 -echo "${ECHO_T}$INSTALL" >&6 - -# Use test -z because SunOS4 sh mishandles braces in ${var-val}. -# It thinks the first close brace ends the variable substitution. -test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' - -test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' - -test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' - - - #-------------------------------------------------------------------- - # Checks to see if the make program sets the $MAKE variable. - #-------------------------------------------------------------------- - - echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 -echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6 -set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,:./+-,___p_,'` -if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.make <<\_ACEOF -all: - @echo 'ac_maketemp="$(MAKE)"' -_ACEOF -# GNU make sometimes prints "make[1]: Entering...", which would confuse us. -eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=` -if test -n "$ac_maketemp"; then - eval ac_cv_prog_make_${ac_make}_set=yes -else - eval ac_cv_prog_make_${ac_make}_set=no -fi -rm -f conftest.make -fi -if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then - echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 - SET_MAKE= -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 - SET_MAKE="MAKE=${MAKE-make}" -fi - - - #-------------------------------------------------------------------- - # Find ranlib - #-------------------------------------------------------------------- - - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. -set dummy ${ac_tool_prefix}ranlib; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_RANLIB+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$RANLIB"; then - ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -fi -fi -RANLIB=$ac_cv_prog_RANLIB -if test -n "$RANLIB"; then - echo "$as_me:$LINENO: result: $RANLIB" >&5 -echo "${ECHO_T}$RANLIB" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - -fi -if test -z "$ac_cv_prog_RANLIB"; then - ac_ct_RANLIB=$RANLIB - # Extract the first word of "ranlib", so it can be a program name with args. -set dummy ranlib; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$ac_ct_RANLIB"; then - ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_RANLIB="ranlib" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - - test -z "$ac_cv_prog_ac_ct_RANLIB" && ac_cv_prog_ac_ct_RANLIB=":" -fi -fi -ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB -if test -n "$ac_ct_RANLIB"; then - echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5 -echo "${ECHO_T}$ac_ct_RANLIB" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - - RANLIB=$ac_ct_RANLIB -else - RANLIB="$ac_cv_prog_RANLIB" -fi - - - #-------------------------------------------------------------------- - # Determines the correct binary file extension (.o, .obj, .exe etc.) - #-------------------------------------------------------------------- - - - - - - -echo "$as_me:$LINENO: checking for egrep" >&5 -echo $ECHO_N "checking for egrep... $ECHO_C" >&6 -if test "${ac_cv_prog_egrep+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if echo a | (grep -E '(a|b)') >/dev/null 2>&1 - then ac_cv_prog_egrep='grep -E' - else ac_cv_prog_egrep='egrep' - fi -fi -echo "$as_me:$LINENO: result: $ac_cv_prog_egrep" >&5 -echo "${ECHO_T}$ac_cv_prog_egrep" >&6 - EGREP=$ac_cv_prog_egrep - - -echo "$as_me:$LINENO: checking for ANSI C header files" >&5 -echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6 -if test "${ac_cv_header_stdc+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -#include -#include -#include - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_header_stdc=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_header_stdc=no -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext - -if test $ac_cv_header_stdc = yes; then - # SunOS 4.x string.h does not declare mem*, contrary to ANSI. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include - -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "memchr" >/dev/null 2>&1; then - : -else - ac_cv_header_stdc=no -fi -rm -f conftest* - -fi - -if test $ac_cv_header_stdc = yes; then - # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include - -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "free" >/dev/null 2>&1; then - : -else - ac_cv_header_stdc=no -fi -rm -f conftest* - -fi - -if test $ac_cv_header_stdc = yes; then - # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. - if test "$cross_compiling" = yes; then - : -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -#if ((' ' & 0x0FF) == 0x020) -# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') -# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) -#else -# define ISLOWER(c) \ - (('a' <= (c) && (c) <= 'i') \ - || ('j' <= (c) && (c) <= 'r') \ - || ('s' <= (c) && (c) <= 'z')) -# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) -#endif - -#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) -int -main () -{ - int i; - for (i = 0; i < 256; i++) - if (XOR (islower (i), ISLOWER (i)) - || toupper (i) != TOUPPER (i)) - exit(2); - exit (0); -} -_ACEOF -rm -f conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { ac_try='./conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - : -else - echo "$as_me: program exited with status $ac_status" >&5 -echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -( exit $ac_status ) -ac_cv_header_stdc=no -fi -rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext -fi -fi -fi -echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 -echo "${ECHO_T}$ac_cv_header_stdc" >&6 -if test $ac_cv_header_stdc = yes; then - -cat >>confdefs.h <<\_ACEOF -#define STDC_HEADERS 1 -_ACEOF - -fi - -# On IRIX 5.3, sys/types and inttypes.h are conflicting. - - - - - - - - - -for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ - inttypes.h stdint.h unistd.h -do -as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` -echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default - -#include <$ac_header> -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - eval "$as_ac_Header=yes" -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -eval "$as_ac_Header=no" -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 -if test `eval echo '${'$as_ac_Header'}'` = yes; then - cat >>confdefs.h <<_ACEOF -#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF - -fi - -done - - - - # Any macros that use the compiler (e.g. AC_TRY_COMPILE) have to go here. - - - #------------------------------------------------------------------------ - # If we're using GCC, see if the compiler understands -pipe. If so, use it. - # It makes compiling go faster. (This is only a performance feature.) - #------------------------------------------------------------------------ - - if test -z "$no_pipe" -a -n "$GCC"; then - echo "$as_me:$LINENO: checking if the compiler understands -pipe" >&5 -echo $ECHO_N "checking if the compiler understands -pipe... $ECHO_C" >&6 -if test "${tcl_cv_cc_pipe+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - - hold_cflags=$CFLAGS; CFLAGS="$CFLAGS -pipe" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - tcl_cv_cc_pipe=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -tcl_cv_cc_pipe=no -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext - CFLAGS=$hold_cflags -fi -echo "$as_me:$LINENO: result: $tcl_cv_cc_pipe" >&5 -echo "${ECHO_T}$tcl_cv_cc_pipe" >&6 - if test $tcl_cv_cc_pipe = yes; then - CFLAGS="$CFLAGS -pipe" - fi - fi - - #-------------------------------------------------------------------- - # Common compiler flag setup - #-------------------------------------------------------------------- - - echo "$as_me:$LINENO: checking whether byte ordering is bigendian" >&5 -echo $ECHO_N "checking whether byte ordering is bigendian... $ECHO_C" >&6 -if test "${ac_cv_c_bigendian+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - # See if sys/param.h defines the BYTE_ORDER macro. -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -#include - -int -main () -{ -#if !BYTE_ORDER || !BIG_ENDIAN || !LITTLE_ENDIAN - bogus endian macros -#endif - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - # It does; now see whether it defined to BIG_ENDIAN or not. -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -#include - -int -main () -{ -#if BYTE_ORDER != BIG_ENDIAN - not big endian -#endif - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_c_bigendian=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_c_bigendian=no -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -# It does not; compile a test program. -if test "$cross_compiling" = yes; then - # try to guess the endianness by grepping values into an object file - ac_cv_c_bigendian=unknown - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -short ascii_mm[] = { 0x4249, 0x4765, 0x6E44, 0x6961, 0x6E53, 0x7953, 0 }; -short ascii_ii[] = { 0x694C, 0x5454, 0x656C, 0x6E45, 0x6944, 0x6E61, 0 }; -void _ascii () { char *s = (char *) ascii_mm; s = (char *) ascii_ii; } -short ebcdic_ii[] = { 0x89D3, 0xE3E3, 0x8593, 0x95C5, 0x89C4, 0x9581, 0 }; -short ebcdic_mm[] = { 0xC2C9, 0xC785, 0x95C4, 0x8981, 0x95E2, 0xA8E2, 0 }; -void _ebcdic () { char *s = (char *) ebcdic_mm; s = (char *) ebcdic_ii; } -int -main () -{ - _ascii (); _ebcdic (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - if grep BIGenDianSyS conftest.$ac_objext >/dev/null ; then - ac_cv_c_bigendian=yes -fi -if grep LiTTleEnDian conftest.$ac_objext >/dev/null ; then - if test "$ac_cv_c_bigendian" = unknown; then - ac_cv_c_bigendian=no - else - # finding both strings is unlikely to happen, but who knows? - ac_cv_c_bigendian=unknown - fi -fi -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -int -main () -{ - /* Are we little or big endian? From Harbison&Steele. */ - union - { - long l; - char c[sizeof (long)]; - } u; - u.l = 1; - exit (u.c[sizeof (long) - 1] == 1); -} -_ACEOF -rm -f conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && { ac_try='./conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_c_bigendian=no -else - echo "$as_me: program exited with status $ac_status" >&5 -echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -( exit $ac_status ) -ac_cv_c_bigendian=yes -fi -rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext -fi -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $ac_cv_c_bigendian" >&5 -echo "${ECHO_T}$ac_cv_c_bigendian" >&6 -case $ac_cv_c_bigendian in - yes) - -cat >>confdefs.h <<\_ACEOF -#define WORDS_BIGENDIAN 1 -_ACEOF - ;; - no) - ;; - *) - { { echo "$as_me:$LINENO: error: unknown endianness -presetting ac_cv_c_bigendian=no (or yes) will help" >&5 -echo "$as_me: error: unknown endianness -presetting ac_cv_c_bigendian=no (or yes) will help" >&2;} - { (exit 1); exit 1; }; } ;; -esac - - if test "${TEA_PLATFORM}" = "unix" ; then - - #-------------------------------------------------------------------- - # On a few very rare systems, all of the libm.a stuff is - # already in libc.a. Set compiler flags accordingly. - # Also, Linux requires the "ieee" library for math to work - # right (and it must appear before "-lm"). - #-------------------------------------------------------------------- - - echo "$as_me:$LINENO: checking for sin" >&5 -echo $ECHO_N "checking for sin... $ECHO_C" >&6 -if test "${ac_cv_func_sin+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -/* Define sin to an innocuous variant, in case declares sin. - For example, HP-UX 11i declares gettimeofday. */ -#define sin innocuous_sin - -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char sin (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ - -#ifdef __STDC__ -# include -#else -# include -#endif - -#undef sin - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -{ -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char sin (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined (__stub_sin) || defined (__stub___sin) -choke me -#else -char (*f) () = sin; -#endif -#ifdef __cplusplus -} -#endif - -int -main () -{ -return f != sin; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_func_sin=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_func_sin=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $ac_cv_func_sin" >&5 -echo "${ECHO_T}$ac_cv_func_sin" >&6 -if test $ac_cv_func_sin = yes; then - MATH_LIBS="" -else - MATH_LIBS="-lm" -fi - - echo "$as_me:$LINENO: checking for main in -lieee" >&5 -echo $ECHO_N "checking for main in -lieee... $ECHO_C" >&6 -if test "${ac_cv_lib_ieee_main+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lieee $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - - -int -main () -{ -main (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_ieee_main=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_lib_ieee_main=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_ieee_main" >&5 -echo "${ECHO_T}$ac_cv_lib_ieee_main" >&6 -if test $ac_cv_lib_ieee_main = yes; then - MATH_LIBS="-lieee $MATH_LIBS" -fi - - - #-------------------------------------------------------------------- - # Interactive UNIX requires -linet instead of -lsocket, plus it - # needs net/errno.h to define the socket-related error codes. - #-------------------------------------------------------------------- - - echo "$as_me:$LINENO: checking for main in -linet" >&5 -echo $ECHO_N "checking for main in -linet... $ECHO_C" >&6 -if test "${ac_cv_lib_inet_main+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-linet $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - - -int -main () -{ -main (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_inet_main=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_lib_inet_main=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_inet_main" >&5 -echo "${ECHO_T}$ac_cv_lib_inet_main" >&6 -if test $ac_cv_lib_inet_main = yes; then - LIBS="$LIBS -linet" -fi - - if test "${ac_cv_header_net_errno_h+set}" = set; then - echo "$as_me:$LINENO: checking for net/errno.h" >&5 -echo $ECHO_N "checking for net/errno.h... $ECHO_C" >&6 -if test "${ac_cv_header_net_errno_h+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -fi -echo "$as_me:$LINENO: result: $ac_cv_header_net_errno_h" >&5 -echo "${ECHO_T}$ac_cv_header_net_errno_h" >&6 -else - # Is the header compilable? -echo "$as_me:$LINENO: checking net/errno.h usability" >&5 -echo $ECHO_N "checking net/errno.h usability... $ECHO_C" >&6 -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -#include -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_header_compiler=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_header_compiler=no -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -echo "${ECHO_T}$ac_header_compiler" >&6 - -# Is the header present? -echo "$as_me:$LINENO: checking net/errno.h presence" >&5 -echo $ECHO_N "checking net/errno.h presence... $ECHO_C" >&6 -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_c_preproc_warn_flag - ac_cpp_err=$ac_cpp_err$ac_c_werror_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - ac_header_preproc=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_header_preproc=no -fi -rm -f conftest.err conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -echo "${ECHO_T}$ac_header_preproc" >&6 - -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in - yes:no: ) - { echo "$as_me:$LINENO: WARNING: net/errno.h: accepted by the compiler, rejected by the preprocessor!" >&5 -echo "$as_me: WARNING: net/errno.h: accepted by the compiler, rejected by the preprocessor!" >&2;} - { echo "$as_me:$LINENO: WARNING: net/errno.h: proceeding with the compiler's result" >&5 -echo "$as_me: WARNING: net/errno.h: proceeding with the compiler's result" >&2;} - ac_header_preproc=yes - ;; - no:yes:* ) - { echo "$as_me:$LINENO: WARNING: net/errno.h: present but cannot be compiled" >&5 -echo "$as_me: WARNING: net/errno.h: present but cannot be compiled" >&2;} - { echo "$as_me:$LINENO: WARNING: net/errno.h: check for missing prerequisite headers?" >&5 -echo "$as_me: WARNING: net/errno.h: check for missing prerequisite headers?" >&2;} - { echo "$as_me:$LINENO: WARNING: net/errno.h: see the Autoconf documentation" >&5 -echo "$as_me: WARNING: net/errno.h: see the Autoconf documentation" >&2;} - { echo "$as_me:$LINENO: WARNING: net/errno.h: section \"Present But Cannot Be Compiled\"" >&5 -echo "$as_me: WARNING: net/errno.h: section \"Present But Cannot Be Compiled\"" >&2;} - { echo "$as_me:$LINENO: WARNING: net/errno.h: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: net/errno.h: proceeding with the preprocessor's result" >&2;} - { echo "$as_me:$LINENO: WARNING: net/errno.h: in the future, the compiler will take precedence" >&5 -echo "$as_me: WARNING: net/errno.h: in the future, the compiler will take precedence" >&2;} - ( - cat <<\_ASBOX -## ------------------------------ ## -## Report this to the tls lists. ## -## ------------------------------ ## -_ASBOX - ) | - sed "s/^/$as_me: WARNING: /" >&2 - ;; -esac -echo "$as_me:$LINENO: checking for net/errno.h" >&5 -echo $ECHO_N "checking for net/errno.h... $ECHO_C" >&6 -if test "${ac_cv_header_net_errno_h+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_cv_header_net_errno_h=$ac_header_preproc -fi -echo "$as_me:$LINENO: result: $ac_cv_header_net_errno_h" >&5 -echo "${ECHO_T}$ac_cv_header_net_errno_h" >&6 - -fi -if test $ac_cv_header_net_errno_h = yes; then - - -cat >>confdefs.h <<\_ACEOF -#define HAVE_NET_ERRNO_H 1 -_ACEOF - -fi - - - - #-------------------------------------------------------------------- - # Check for the existence of the -lsocket and -lnsl libraries. - # The order here is important, so that they end up in the right - # order in the command line generated by make. Here are some - # special considerations: - # 1. Use "connect" and "accept" to check for -lsocket, and - # "gethostbyname" to check for -lnsl. - # 2. Use each function name only once: can't redo a check because - # autoconf caches the results of the last check and won't redo it. - # 3. Use -lnsl and -lsocket only if they supply procedures that - # aren't already present in the normal libraries. This is because - # IRIX 5.2 has libraries, but they aren't needed and they're - # bogus: they goof up name resolution if used. - # 4. On some SVR4 systems, can't use -lsocket without -lnsl too. - # To get around this problem, check for both libraries together - # if -lsocket doesn't work by itself. - #-------------------------------------------------------------------- - - tcl_checkBoth=0 - echo "$as_me:$LINENO: checking for connect" >&5 -echo $ECHO_N "checking for connect... $ECHO_C" >&6 -if test "${ac_cv_func_connect+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -/* Define connect to an innocuous variant, in case declares connect. - For example, HP-UX 11i declares gettimeofday. */ -#define connect innocuous_connect - -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char connect (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ - -#ifdef __STDC__ -# include -#else -# include -#endif - -#undef connect - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -{ -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char connect (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined (__stub_connect) || defined (__stub___connect) -choke me -#else -char (*f) () = connect; -#endif -#ifdef __cplusplus -} -#endif - -int -main () -{ -return f != connect; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_func_connect=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_func_connect=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $ac_cv_func_connect" >&5 -echo "${ECHO_T}$ac_cv_func_connect" >&6 -if test $ac_cv_func_connect = yes; then - tcl_checkSocket=0 -else - tcl_checkSocket=1 -fi - - if test "$tcl_checkSocket" = 1; then - echo "$as_me:$LINENO: checking for setsockopt" >&5 -echo $ECHO_N "checking for setsockopt... $ECHO_C" >&6 -if test "${ac_cv_func_setsockopt+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -/* Define setsockopt to an innocuous variant, in case declares setsockopt. - For example, HP-UX 11i declares gettimeofday. */ -#define setsockopt innocuous_setsockopt - -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char setsockopt (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ - -#ifdef __STDC__ -# include -#else -# include -#endif - -#undef setsockopt - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -{ -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char setsockopt (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined (__stub_setsockopt) || defined (__stub___setsockopt) -choke me -#else -char (*f) () = setsockopt; -#endif -#ifdef __cplusplus -} -#endif - -int -main () -{ -return f != setsockopt; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_func_setsockopt=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_func_setsockopt=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $ac_cv_func_setsockopt" >&5 -echo "${ECHO_T}$ac_cv_func_setsockopt" >&6 -if test $ac_cv_func_setsockopt = yes; then - : -else - echo "$as_me:$LINENO: checking for setsockopt in -lsocket" >&5 -echo $ECHO_N "checking for setsockopt in -lsocket... $ECHO_C" >&6 -if test "${ac_cv_lib_socket_setsockopt+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lsocket $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char setsockopt (); -int -main () -{ -setsockopt (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_socket_setsockopt=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_lib_socket_setsockopt=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_socket_setsockopt" >&5 -echo "${ECHO_T}$ac_cv_lib_socket_setsockopt" >&6 -if test $ac_cv_lib_socket_setsockopt = yes; then - LIBS="$LIBS -lsocket" -else - tcl_checkBoth=1 -fi - -fi - - fi - if test "$tcl_checkBoth" = 1; then - tk_oldLibs=$LIBS - LIBS="$LIBS -lsocket -lnsl" - echo "$as_me:$LINENO: checking for accept" >&5 -echo $ECHO_N "checking for accept... $ECHO_C" >&6 -if test "${ac_cv_func_accept+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -/* Define accept to an innocuous variant, in case declares accept. - For example, HP-UX 11i declares gettimeofday. */ -#define accept innocuous_accept - -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char accept (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ - -#ifdef __STDC__ -# include -#else -# include -#endif - -#undef accept - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -{ -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char accept (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined (__stub_accept) || defined (__stub___accept) -choke me -#else -char (*f) () = accept; -#endif -#ifdef __cplusplus -} -#endif - -int -main () -{ -return f != accept; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_func_accept=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_func_accept=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $ac_cv_func_accept" >&5 -echo "${ECHO_T}$ac_cv_func_accept" >&6 -if test $ac_cv_func_accept = yes; then - tcl_checkNsl=0 -else - LIBS=$tk_oldLibs -fi - - fi - echo "$as_me:$LINENO: checking for gethostbyname" >&5 -echo $ECHO_N "checking for gethostbyname... $ECHO_C" >&6 -if test "${ac_cv_func_gethostbyname+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -/* Define gethostbyname to an innocuous variant, in case declares gethostbyname. - For example, HP-UX 11i declares gettimeofday. */ -#define gethostbyname innocuous_gethostbyname - -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char gethostbyname (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ - -#ifdef __STDC__ -# include -#else -# include -#endif - -#undef gethostbyname - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -{ -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char gethostbyname (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined (__stub_gethostbyname) || defined (__stub___gethostbyname) -choke me -#else -char (*f) () = gethostbyname; -#endif -#ifdef __cplusplus -} -#endif - -int -main () -{ -return f != gethostbyname; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_func_gethostbyname=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_func_gethostbyname=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $ac_cv_func_gethostbyname" >&5 -echo "${ECHO_T}$ac_cv_func_gethostbyname" >&6 -if test $ac_cv_func_gethostbyname = yes; then - : -else - echo "$as_me:$LINENO: checking for gethostbyname in -lnsl" >&5 -echo $ECHO_N "checking for gethostbyname in -lnsl... $ECHO_C" >&6 -if test "${ac_cv_lib_nsl_gethostbyname+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lnsl $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char gethostbyname (); -int -main () -{ -gethostbyname (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_nsl_gethostbyname=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_lib_nsl_gethostbyname=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_nsl_gethostbyname" >&5 -echo "${ECHO_T}$ac_cv_lib_nsl_gethostbyname" >&6 -if test $ac_cv_lib_nsl_gethostbyname = yes; then - LIBS="$LIBS -lnsl" -fi - -fi - - - # TEA specific: Don't perform the eval of the libraries here because - # DL_LIBS won't be set until we call TEA_CONFIG_CFLAGS - - TCL_LIBS='${DL_LIBS} ${LIBS} ${MATH_LIBS}' - - - - - echo "$as_me:$LINENO: checking dirent.h" >&5 -echo $ECHO_N "checking dirent.h... $ECHO_C" >&6 -if test "${tcl_cv_dirent_h+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -#include -int -main () -{ - -#ifndef _POSIX_SOURCE -# ifdef __Lynx__ - /* - * Generate compilation error to make the test fail: Lynx headers - * are only valid if really in the POSIX environment. - */ - - missing_procedure(); -# endif -#endif -DIR *d; -struct dirent *entryPtr; -char *p; -d = opendir("foobar"); -entryPtr = readdir(d); -p = entryPtr->d_name; -closedir(d); - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - tcl_cv_dirent_h=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -tcl_cv_dirent_h=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $tcl_cv_dirent_h" >&5 -echo "${ECHO_T}$tcl_cv_dirent_h" >&6 - - if test $tcl_cv_dirent_h = no; then - -cat >>confdefs.h <<\_ACEOF -#define NO_DIRENT_H 1 -_ACEOF - - fi - - # TEA specific: - if test "${ac_cv_header_errno_h+set}" = set; then - echo "$as_me:$LINENO: checking for errno.h" >&5 -echo $ECHO_N "checking for errno.h... $ECHO_C" >&6 -if test "${ac_cv_header_errno_h+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -fi -echo "$as_me:$LINENO: result: $ac_cv_header_errno_h" >&5 -echo "${ECHO_T}$ac_cv_header_errno_h" >&6 -else - # Is the header compilable? -echo "$as_me:$LINENO: checking errno.h usability" >&5 -echo $ECHO_N "checking errno.h usability... $ECHO_C" >&6 -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -#include -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_header_compiler=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_header_compiler=no -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -echo "${ECHO_T}$ac_header_compiler" >&6 - -# Is the header present? -echo "$as_me:$LINENO: checking errno.h presence" >&5 -echo $ECHO_N "checking errno.h presence... $ECHO_C" >&6 -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_c_preproc_warn_flag - ac_cpp_err=$ac_cpp_err$ac_c_werror_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - ac_header_preproc=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_header_preproc=no -fi -rm -f conftest.err conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -echo "${ECHO_T}$ac_header_preproc" >&6 - -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in - yes:no: ) - { echo "$as_me:$LINENO: WARNING: errno.h: accepted by the compiler, rejected by the preprocessor!" >&5 -echo "$as_me: WARNING: errno.h: accepted by the compiler, rejected by the preprocessor!" >&2;} - { echo "$as_me:$LINENO: WARNING: errno.h: proceeding with the compiler's result" >&5 -echo "$as_me: WARNING: errno.h: proceeding with the compiler's result" >&2;} - ac_header_preproc=yes - ;; - no:yes:* ) - { echo "$as_me:$LINENO: WARNING: errno.h: present but cannot be compiled" >&5 -echo "$as_me: WARNING: errno.h: present but cannot be compiled" >&2;} - { echo "$as_me:$LINENO: WARNING: errno.h: check for missing prerequisite headers?" >&5 -echo "$as_me: WARNING: errno.h: check for missing prerequisite headers?" >&2;} - { echo "$as_me:$LINENO: WARNING: errno.h: see the Autoconf documentation" >&5 -echo "$as_me: WARNING: errno.h: see the Autoconf documentation" >&2;} - { echo "$as_me:$LINENO: WARNING: errno.h: section \"Present But Cannot Be Compiled\"" >&5 -echo "$as_me: WARNING: errno.h: section \"Present But Cannot Be Compiled\"" >&2;} - { echo "$as_me:$LINENO: WARNING: errno.h: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: errno.h: proceeding with the preprocessor's result" >&2;} - { echo "$as_me:$LINENO: WARNING: errno.h: in the future, the compiler will take precedence" >&5 -echo "$as_me: WARNING: errno.h: in the future, the compiler will take precedence" >&2;} - ( - cat <<\_ASBOX -## ------------------------------ ## -## Report this to the tls lists. ## -## ------------------------------ ## -_ASBOX - ) | - sed "s/^/$as_me: WARNING: /" >&2 - ;; -esac -echo "$as_me:$LINENO: checking for errno.h" >&5 -echo $ECHO_N "checking for errno.h... $ECHO_C" >&6 -if test "${ac_cv_header_errno_h+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_cv_header_errno_h=$ac_header_preproc -fi -echo "$as_me:$LINENO: result: $ac_cv_header_errno_h" >&5 -echo "${ECHO_T}$ac_cv_header_errno_h" >&6 - -fi -if test $ac_cv_header_errno_h = yes; then - : -else - -cat >>confdefs.h <<\_ACEOF -#define NO_ERRNO_H 1 -_ACEOF - -fi - - - if test "${ac_cv_header_float_h+set}" = set; then - echo "$as_me:$LINENO: checking for float.h" >&5 -echo $ECHO_N "checking for float.h... $ECHO_C" >&6 -if test "${ac_cv_header_float_h+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -fi -echo "$as_me:$LINENO: result: $ac_cv_header_float_h" >&5 -echo "${ECHO_T}$ac_cv_header_float_h" >&6 -else - # Is the header compilable? -echo "$as_me:$LINENO: checking float.h usability" >&5 -echo $ECHO_N "checking float.h usability... $ECHO_C" >&6 -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -#include -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_header_compiler=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_header_compiler=no -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -echo "${ECHO_T}$ac_header_compiler" >&6 - -# Is the header present? -echo "$as_me:$LINENO: checking float.h presence" >&5 -echo $ECHO_N "checking float.h presence... $ECHO_C" >&6 -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_c_preproc_warn_flag - ac_cpp_err=$ac_cpp_err$ac_c_werror_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - ac_header_preproc=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_header_preproc=no -fi -rm -f conftest.err conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -echo "${ECHO_T}$ac_header_preproc" >&6 - -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in - yes:no: ) - { echo "$as_me:$LINENO: WARNING: float.h: accepted by the compiler, rejected by the preprocessor!" >&5 -echo "$as_me: WARNING: float.h: accepted by the compiler, rejected by the preprocessor!" >&2;} - { echo "$as_me:$LINENO: WARNING: float.h: proceeding with the compiler's result" >&5 -echo "$as_me: WARNING: float.h: proceeding with the compiler's result" >&2;} - ac_header_preproc=yes - ;; - no:yes:* ) - { echo "$as_me:$LINENO: WARNING: float.h: present but cannot be compiled" >&5 -echo "$as_me: WARNING: float.h: present but cannot be compiled" >&2;} - { echo "$as_me:$LINENO: WARNING: float.h: check for missing prerequisite headers?" >&5 -echo "$as_me: WARNING: float.h: check for missing prerequisite headers?" >&2;} - { echo "$as_me:$LINENO: WARNING: float.h: see the Autoconf documentation" >&5 -echo "$as_me: WARNING: float.h: see the Autoconf documentation" >&2;} - { echo "$as_me:$LINENO: WARNING: float.h: section \"Present But Cannot Be Compiled\"" >&5 -echo "$as_me: WARNING: float.h: section \"Present But Cannot Be Compiled\"" >&2;} - { echo "$as_me:$LINENO: WARNING: float.h: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: float.h: proceeding with the preprocessor's result" >&2;} - { echo "$as_me:$LINENO: WARNING: float.h: in the future, the compiler will take precedence" >&5 -echo "$as_me: WARNING: float.h: in the future, the compiler will take precedence" >&2;} - ( - cat <<\_ASBOX -## ------------------------------ ## -## Report this to the tls lists. ## -## ------------------------------ ## -_ASBOX - ) | - sed "s/^/$as_me: WARNING: /" >&2 - ;; -esac -echo "$as_me:$LINENO: checking for float.h" >&5 -echo $ECHO_N "checking for float.h... $ECHO_C" >&6 -if test "${ac_cv_header_float_h+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_cv_header_float_h=$ac_header_preproc -fi -echo "$as_me:$LINENO: result: $ac_cv_header_float_h" >&5 -echo "${ECHO_T}$ac_cv_header_float_h" >&6 - -fi -if test $ac_cv_header_float_h = yes; then - : -else - -cat >>confdefs.h <<\_ACEOF -#define NO_FLOAT_H 1 -_ACEOF - -fi - - - if test "${ac_cv_header_values_h+set}" = set; then - echo "$as_me:$LINENO: checking for values.h" >&5 -echo $ECHO_N "checking for values.h... $ECHO_C" >&6 -if test "${ac_cv_header_values_h+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -fi -echo "$as_me:$LINENO: result: $ac_cv_header_values_h" >&5 -echo "${ECHO_T}$ac_cv_header_values_h" >&6 -else - # Is the header compilable? -echo "$as_me:$LINENO: checking values.h usability" >&5 -echo $ECHO_N "checking values.h usability... $ECHO_C" >&6 -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -#include -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_header_compiler=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_header_compiler=no -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -echo "${ECHO_T}$ac_header_compiler" >&6 - -# Is the header present? -echo "$as_me:$LINENO: checking values.h presence" >&5 -echo $ECHO_N "checking values.h presence... $ECHO_C" >&6 -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_c_preproc_warn_flag - ac_cpp_err=$ac_cpp_err$ac_c_werror_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - ac_header_preproc=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_header_preproc=no -fi -rm -f conftest.err conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -echo "${ECHO_T}$ac_header_preproc" >&6 - -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in - yes:no: ) - { echo "$as_me:$LINENO: WARNING: values.h: accepted by the compiler, rejected by the preprocessor!" >&5 -echo "$as_me: WARNING: values.h: accepted by the compiler, rejected by the preprocessor!" >&2;} - { echo "$as_me:$LINENO: WARNING: values.h: proceeding with the compiler's result" >&5 -echo "$as_me: WARNING: values.h: proceeding with the compiler's result" >&2;} - ac_header_preproc=yes - ;; - no:yes:* ) - { echo "$as_me:$LINENO: WARNING: values.h: present but cannot be compiled" >&5 -echo "$as_me: WARNING: values.h: present but cannot be compiled" >&2;} - { echo "$as_me:$LINENO: WARNING: values.h: check for missing prerequisite headers?" >&5 -echo "$as_me: WARNING: values.h: check for missing prerequisite headers?" >&2;} - { echo "$as_me:$LINENO: WARNING: values.h: see the Autoconf documentation" >&5 -echo "$as_me: WARNING: values.h: see the Autoconf documentation" >&2;} - { echo "$as_me:$LINENO: WARNING: values.h: section \"Present But Cannot Be Compiled\"" >&5 -echo "$as_me: WARNING: values.h: section \"Present But Cannot Be Compiled\"" >&2;} - { echo "$as_me:$LINENO: WARNING: values.h: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: values.h: proceeding with the preprocessor's result" >&2;} - { echo "$as_me:$LINENO: WARNING: values.h: in the future, the compiler will take precedence" >&5 -echo "$as_me: WARNING: values.h: in the future, the compiler will take precedence" >&2;} - ( - cat <<\_ASBOX -## ------------------------------ ## -## Report this to the tls lists. ## -## ------------------------------ ## -_ASBOX - ) | - sed "s/^/$as_me: WARNING: /" >&2 - ;; -esac -echo "$as_me:$LINENO: checking for values.h" >&5 -echo $ECHO_N "checking for values.h... $ECHO_C" >&6 -if test "${ac_cv_header_values_h+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_cv_header_values_h=$ac_header_preproc -fi -echo "$as_me:$LINENO: result: $ac_cv_header_values_h" >&5 -echo "${ECHO_T}$ac_cv_header_values_h" >&6 - -fi -if test $ac_cv_header_values_h = yes; then - : -else - -cat >>confdefs.h <<\_ACEOF -#define NO_VALUES_H 1 -_ACEOF - -fi - - - if test "${ac_cv_header_limits_h+set}" = set; then - echo "$as_me:$LINENO: checking for limits.h" >&5 -echo $ECHO_N "checking for limits.h... $ECHO_C" >&6 -if test "${ac_cv_header_limits_h+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -fi -echo "$as_me:$LINENO: result: $ac_cv_header_limits_h" >&5 -echo "${ECHO_T}$ac_cv_header_limits_h" >&6 -else - # Is the header compilable? -echo "$as_me:$LINENO: checking limits.h usability" >&5 -echo $ECHO_N "checking limits.h usability... $ECHO_C" >&6 -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -#include -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_header_compiler=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_header_compiler=no -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -echo "${ECHO_T}$ac_header_compiler" >&6 - -# Is the header present? -echo "$as_me:$LINENO: checking limits.h presence" >&5 -echo $ECHO_N "checking limits.h presence... $ECHO_C" >&6 -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_c_preproc_warn_flag - ac_cpp_err=$ac_cpp_err$ac_c_werror_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - ac_header_preproc=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_header_preproc=no -fi -rm -f conftest.err conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -echo "${ECHO_T}$ac_header_preproc" >&6 - -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in - yes:no: ) - { echo "$as_me:$LINENO: WARNING: limits.h: accepted by the compiler, rejected by the preprocessor!" >&5 -echo "$as_me: WARNING: limits.h: accepted by the compiler, rejected by the preprocessor!" >&2;} - { echo "$as_me:$LINENO: WARNING: limits.h: proceeding with the compiler's result" >&5 -echo "$as_me: WARNING: limits.h: proceeding with the compiler's result" >&2;} - ac_header_preproc=yes - ;; - no:yes:* ) - { echo "$as_me:$LINENO: WARNING: limits.h: present but cannot be compiled" >&5 -echo "$as_me: WARNING: limits.h: present but cannot be compiled" >&2;} - { echo "$as_me:$LINENO: WARNING: limits.h: check for missing prerequisite headers?" >&5 -echo "$as_me: WARNING: limits.h: check for missing prerequisite headers?" >&2;} - { echo "$as_me:$LINENO: WARNING: limits.h: see the Autoconf documentation" >&5 -echo "$as_me: WARNING: limits.h: see the Autoconf documentation" >&2;} - { echo "$as_me:$LINENO: WARNING: limits.h: section \"Present But Cannot Be Compiled\"" >&5 -echo "$as_me: WARNING: limits.h: section \"Present But Cannot Be Compiled\"" >&2;} - { echo "$as_me:$LINENO: WARNING: limits.h: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: limits.h: proceeding with the preprocessor's result" >&2;} - { echo "$as_me:$LINENO: WARNING: limits.h: in the future, the compiler will take precedence" >&5 -echo "$as_me: WARNING: limits.h: in the future, the compiler will take precedence" >&2;} - ( - cat <<\_ASBOX -## ------------------------------ ## -## Report this to the tls lists. ## -## ------------------------------ ## -_ASBOX - ) | - sed "s/^/$as_me: WARNING: /" >&2 - ;; -esac -echo "$as_me:$LINENO: checking for limits.h" >&5 -echo $ECHO_N "checking for limits.h... $ECHO_C" >&6 -if test "${ac_cv_header_limits_h+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_cv_header_limits_h=$ac_header_preproc -fi -echo "$as_me:$LINENO: result: $ac_cv_header_limits_h" >&5 -echo "${ECHO_T}$ac_cv_header_limits_h" >&6 - -fi -if test $ac_cv_header_limits_h = yes; then - -cat >>confdefs.h <<\_ACEOF -#define HAVE_LIMITS_H 1 -_ACEOF - -else - -cat >>confdefs.h <<\_ACEOF -#define NO_LIMITS_H 1 -_ACEOF - -fi - - - if test "${ac_cv_header_stdlib_h+set}" = set; then - echo "$as_me:$LINENO: checking for stdlib.h" >&5 -echo $ECHO_N "checking for stdlib.h... $ECHO_C" >&6 -if test "${ac_cv_header_stdlib_h+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -fi -echo "$as_me:$LINENO: result: $ac_cv_header_stdlib_h" >&5 -echo "${ECHO_T}$ac_cv_header_stdlib_h" >&6 -else - # Is the header compilable? -echo "$as_me:$LINENO: checking stdlib.h usability" >&5 -echo $ECHO_N "checking stdlib.h usability... $ECHO_C" >&6 -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -#include -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_header_compiler=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_header_compiler=no -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -echo "${ECHO_T}$ac_header_compiler" >&6 - -# Is the header present? -echo "$as_me:$LINENO: checking stdlib.h presence" >&5 -echo $ECHO_N "checking stdlib.h presence... $ECHO_C" >&6 -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_c_preproc_warn_flag - ac_cpp_err=$ac_cpp_err$ac_c_werror_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - ac_header_preproc=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_header_preproc=no -fi -rm -f conftest.err conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -echo "${ECHO_T}$ac_header_preproc" >&6 - -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in - yes:no: ) - { echo "$as_me:$LINENO: WARNING: stdlib.h: accepted by the compiler, rejected by the preprocessor!" >&5 -echo "$as_me: WARNING: stdlib.h: accepted by the compiler, rejected by the preprocessor!" >&2;} - { echo "$as_me:$LINENO: WARNING: stdlib.h: proceeding with the compiler's result" >&5 -echo "$as_me: WARNING: stdlib.h: proceeding with the compiler's result" >&2;} - ac_header_preproc=yes - ;; - no:yes:* ) - { echo "$as_me:$LINENO: WARNING: stdlib.h: present but cannot be compiled" >&5 -echo "$as_me: WARNING: stdlib.h: present but cannot be compiled" >&2;} - { echo "$as_me:$LINENO: WARNING: stdlib.h: check for missing prerequisite headers?" >&5 -echo "$as_me: WARNING: stdlib.h: check for missing prerequisite headers?" >&2;} - { echo "$as_me:$LINENO: WARNING: stdlib.h: see the Autoconf documentation" >&5 -echo "$as_me: WARNING: stdlib.h: see the Autoconf documentation" >&2;} - { echo "$as_me:$LINENO: WARNING: stdlib.h: section \"Present But Cannot Be Compiled\"" >&5 -echo "$as_me: WARNING: stdlib.h: section \"Present But Cannot Be Compiled\"" >&2;} - { echo "$as_me:$LINENO: WARNING: stdlib.h: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: stdlib.h: proceeding with the preprocessor's result" >&2;} - { echo "$as_me:$LINENO: WARNING: stdlib.h: in the future, the compiler will take precedence" >&5 -echo "$as_me: WARNING: stdlib.h: in the future, the compiler will take precedence" >&2;} - ( - cat <<\_ASBOX -## ------------------------------ ## -## Report this to the tls lists. ## -## ------------------------------ ## -_ASBOX - ) | - sed "s/^/$as_me: WARNING: /" >&2 - ;; -esac -echo "$as_me:$LINENO: checking for stdlib.h" >&5 -echo $ECHO_N "checking for stdlib.h... $ECHO_C" >&6 -if test "${ac_cv_header_stdlib_h+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_cv_header_stdlib_h=$ac_header_preproc -fi -echo "$as_me:$LINENO: result: $ac_cv_header_stdlib_h" >&5 -echo "${ECHO_T}$ac_cv_header_stdlib_h" >&6 - -fi -if test $ac_cv_header_stdlib_h = yes; then - tcl_ok=1 -else - tcl_ok=0 -fi - - - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include - -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "strtol" >/dev/null 2>&1; then - : -else - tcl_ok=0 -fi -rm -f conftest* - - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include - -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "strtoul" >/dev/null 2>&1; then - : -else - tcl_ok=0 -fi -rm -f conftest* - - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include - -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "strtod" >/dev/null 2>&1; then - : -else - tcl_ok=0 -fi -rm -f conftest* - - if test $tcl_ok = 0; then - -cat >>confdefs.h <<\_ACEOF -#define NO_STDLIB_H 1 -_ACEOF - - fi - if test "${ac_cv_header_string_h+set}" = set; then - echo "$as_me:$LINENO: checking for string.h" >&5 -echo $ECHO_N "checking for string.h... $ECHO_C" >&6 -if test "${ac_cv_header_string_h+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -fi -echo "$as_me:$LINENO: result: $ac_cv_header_string_h" >&5 -echo "${ECHO_T}$ac_cv_header_string_h" >&6 -else - # Is the header compilable? -echo "$as_me:$LINENO: checking string.h usability" >&5 -echo $ECHO_N "checking string.h usability... $ECHO_C" >&6 -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -#include -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_header_compiler=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_header_compiler=no -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -echo "${ECHO_T}$ac_header_compiler" >&6 - -# Is the header present? -echo "$as_me:$LINENO: checking string.h presence" >&5 -echo $ECHO_N "checking string.h presence... $ECHO_C" >&6 -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_c_preproc_warn_flag - ac_cpp_err=$ac_cpp_err$ac_c_werror_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - ac_header_preproc=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_header_preproc=no -fi -rm -f conftest.err conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -echo "${ECHO_T}$ac_header_preproc" >&6 - -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in - yes:no: ) - { echo "$as_me:$LINENO: WARNING: string.h: accepted by the compiler, rejected by the preprocessor!" >&5 -echo "$as_me: WARNING: string.h: accepted by the compiler, rejected by the preprocessor!" >&2;} - { echo "$as_me:$LINENO: WARNING: string.h: proceeding with the compiler's result" >&5 -echo "$as_me: WARNING: string.h: proceeding with the compiler's result" >&2;} - ac_header_preproc=yes - ;; - no:yes:* ) - { echo "$as_me:$LINENO: WARNING: string.h: present but cannot be compiled" >&5 -echo "$as_me: WARNING: string.h: present but cannot be compiled" >&2;} - { echo "$as_me:$LINENO: WARNING: string.h: check for missing prerequisite headers?" >&5 -echo "$as_me: WARNING: string.h: check for missing prerequisite headers?" >&2;} - { echo "$as_me:$LINENO: WARNING: string.h: see the Autoconf documentation" >&5 -echo "$as_me: WARNING: string.h: see the Autoconf documentation" >&2;} - { echo "$as_me:$LINENO: WARNING: string.h: section \"Present But Cannot Be Compiled\"" >&5 -echo "$as_me: WARNING: string.h: section \"Present But Cannot Be Compiled\"" >&2;} - { echo "$as_me:$LINENO: WARNING: string.h: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: string.h: proceeding with the preprocessor's result" >&2;} - { echo "$as_me:$LINENO: WARNING: string.h: in the future, the compiler will take precedence" >&5 -echo "$as_me: WARNING: string.h: in the future, the compiler will take precedence" >&2;} - ( - cat <<\_ASBOX -## ------------------------------ ## -## Report this to the tls lists. ## -## ------------------------------ ## -_ASBOX - ) | - sed "s/^/$as_me: WARNING: /" >&2 - ;; -esac -echo "$as_me:$LINENO: checking for string.h" >&5 -echo $ECHO_N "checking for string.h... $ECHO_C" >&6 -if test "${ac_cv_header_string_h+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_cv_header_string_h=$ac_header_preproc -fi -echo "$as_me:$LINENO: result: $ac_cv_header_string_h" >&5 -echo "${ECHO_T}$ac_cv_header_string_h" >&6 - -fi -if test $ac_cv_header_string_h = yes; then - tcl_ok=1 -else - tcl_ok=0 -fi - - - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include - -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "strstr" >/dev/null 2>&1; then - : -else - tcl_ok=0 -fi -rm -f conftest* - - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include - -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "strerror" >/dev/null 2>&1; then - : -else - tcl_ok=0 -fi -rm -f conftest* - - - # See also memmove check below for a place where NO_STRING_H can be - # set and why. - - if test $tcl_ok = 0; then - -cat >>confdefs.h <<\_ACEOF -#define NO_STRING_H 1 -_ACEOF - - fi - - if test "${ac_cv_header_sys_wait_h+set}" = set; then - echo "$as_me:$LINENO: checking for sys/wait.h" >&5 -echo $ECHO_N "checking for sys/wait.h... $ECHO_C" >&6 -if test "${ac_cv_header_sys_wait_h+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -fi -echo "$as_me:$LINENO: result: $ac_cv_header_sys_wait_h" >&5 -echo "${ECHO_T}$ac_cv_header_sys_wait_h" >&6 -else - # Is the header compilable? -echo "$as_me:$LINENO: checking sys/wait.h usability" >&5 -echo $ECHO_N "checking sys/wait.h usability... $ECHO_C" >&6 -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -#include -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_header_compiler=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_header_compiler=no -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -echo "${ECHO_T}$ac_header_compiler" >&6 - -# Is the header present? -echo "$as_me:$LINENO: checking sys/wait.h presence" >&5 -echo $ECHO_N "checking sys/wait.h presence... $ECHO_C" >&6 -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_c_preproc_warn_flag - ac_cpp_err=$ac_cpp_err$ac_c_werror_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - ac_header_preproc=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_header_preproc=no -fi -rm -f conftest.err conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -echo "${ECHO_T}$ac_header_preproc" >&6 - -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in - yes:no: ) - { echo "$as_me:$LINENO: WARNING: sys/wait.h: accepted by the compiler, rejected by the preprocessor!" >&5 -echo "$as_me: WARNING: sys/wait.h: accepted by the compiler, rejected by the preprocessor!" >&2;} - { echo "$as_me:$LINENO: WARNING: sys/wait.h: proceeding with the compiler's result" >&5 -echo "$as_me: WARNING: sys/wait.h: proceeding with the compiler's result" >&2;} - ac_header_preproc=yes - ;; - no:yes:* ) - { echo "$as_me:$LINENO: WARNING: sys/wait.h: present but cannot be compiled" >&5 -echo "$as_me: WARNING: sys/wait.h: present but cannot be compiled" >&2;} - { echo "$as_me:$LINENO: WARNING: sys/wait.h: check for missing prerequisite headers?" >&5 -echo "$as_me: WARNING: sys/wait.h: check for missing prerequisite headers?" >&2;} - { echo "$as_me:$LINENO: WARNING: sys/wait.h: see the Autoconf documentation" >&5 -echo "$as_me: WARNING: sys/wait.h: see the Autoconf documentation" >&2;} - { echo "$as_me:$LINENO: WARNING: sys/wait.h: section \"Present But Cannot Be Compiled\"" >&5 -echo "$as_me: WARNING: sys/wait.h: section \"Present But Cannot Be Compiled\"" >&2;} - { echo "$as_me:$LINENO: WARNING: sys/wait.h: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: sys/wait.h: proceeding with the preprocessor's result" >&2;} - { echo "$as_me:$LINENO: WARNING: sys/wait.h: in the future, the compiler will take precedence" >&5 -echo "$as_me: WARNING: sys/wait.h: in the future, the compiler will take precedence" >&2;} - ( - cat <<\_ASBOX -## ------------------------------ ## -## Report this to the tls lists. ## -## ------------------------------ ## -_ASBOX - ) | - sed "s/^/$as_me: WARNING: /" >&2 - ;; -esac -echo "$as_me:$LINENO: checking for sys/wait.h" >&5 -echo $ECHO_N "checking for sys/wait.h... $ECHO_C" >&6 -if test "${ac_cv_header_sys_wait_h+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_cv_header_sys_wait_h=$ac_header_preproc -fi -echo "$as_me:$LINENO: result: $ac_cv_header_sys_wait_h" >&5 -echo "${ECHO_T}$ac_cv_header_sys_wait_h" >&6 - -fi -if test $ac_cv_header_sys_wait_h = yes; then - : -else - -cat >>confdefs.h <<\_ACEOF -#define NO_SYS_WAIT_H 1 -_ACEOF - -fi - - - if test "${ac_cv_header_dlfcn_h+set}" = set; then - echo "$as_me:$LINENO: checking for dlfcn.h" >&5 -echo $ECHO_N "checking for dlfcn.h... $ECHO_C" >&6 -if test "${ac_cv_header_dlfcn_h+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -fi -echo "$as_me:$LINENO: result: $ac_cv_header_dlfcn_h" >&5 -echo "${ECHO_T}$ac_cv_header_dlfcn_h" >&6 -else - # Is the header compilable? -echo "$as_me:$LINENO: checking dlfcn.h usability" >&5 -echo $ECHO_N "checking dlfcn.h usability... $ECHO_C" >&6 -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -#include -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_header_compiler=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_header_compiler=no -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -echo "${ECHO_T}$ac_header_compiler" >&6 - -# Is the header present? -echo "$as_me:$LINENO: checking dlfcn.h presence" >&5 -echo $ECHO_N "checking dlfcn.h presence... $ECHO_C" >&6 -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_c_preproc_warn_flag - ac_cpp_err=$ac_cpp_err$ac_c_werror_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - ac_header_preproc=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_header_preproc=no -fi -rm -f conftest.err conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -echo "${ECHO_T}$ac_header_preproc" >&6 - -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in - yes:no: ) - { echo "$as_me:$LINENO: WARNING: dlfcn.h: accepted by the compiler, rejected by the preprocessor!" >&5 -echo "$as_me: WARNING: dlfcn.h: accepted by the compiler, rejected by the preprocessor!" >&2;} - { echo "$as_me:$LINENO: WARNING: dlfcn.h: proceeding with the compiler's result" >&5 -echo "$as_me: WARNING: dlfcn.h: proceeding with the compiler's result" >&2;} - ac_header_preproc=yes - ;; - no:yes:* ) - { echo "$as_me:$LINENO: WARNING: dlfcn.h: present but cannot be compiled" >&5 -echo "$as_me: WARNING: dlfcn.h: present but cannot be compiled" >&2;} - { echo "$as_me:$LINENO: WARNING: dlfcn.h: check for missing prerequisite headers?" >&5 -echo "$as_me: WARNING: dlfcn.h: check for missing prerequisite headers?" >&2;} - { echo "$as_me:$LINENO: WARNING: dlfcn.h: see the Autoconf documentation" >&5 -echo "$as_me: WARNING: dlfcn.h: see the Autoconf documentation" >&2;} - { echo "$as_me:$LINENO: WARNING: dlfcn.h: section \"Present But Cannot Be Compiled\"" >&5 -echo "$as_me: WARNING: dlfcn.h: section \"Present But Cannot Be Compiled\"" >&2;} - { echo "$as_me:$LINENO: WARNING: dlfcn.h: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: dlfcn.h: proceeding with the preprocessor's result" >&2;} - { echo "$as_me:$LINENO: WARNING: dlfcn.h: in the future, the compiler will take precedence" >&5 -echo "$as_me: WARNING: dlfcn.h: in the future, the compiler will take precedence" >&2;} - ( - cat <<\_ASBOX -## ------------------------------ ## -## Report this to the tls lists. ## -## ------------------------------ ## -_ASBOX - ) | - sed "s/^/$as_me: WARNING: /" >&2 - ;; -esac -echo "$as_me:$LINENO: checking for dlfcn.h" >&5 -echo $ECHO_N "checking for dlfcn.h... $ECHO_C" >&6 -if test "${ac_cv_header_dlfcn_h+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_cv_header_dlfcn_h=$ac_header_preproc -fi -echo "$as_me:$LINENO: result: $ac_cv_header_dlfcn_h" >&5 -echo "${ECHO_T}$ac_cv_header_dlfcn_h" >&6 - -fi -if test $ac_cv_header_dlfcn_h = yes; then - : -else - -cat >>confdefs.h <<\_ACEOF -#define NO_DLFCN_H 1 -_ACEOF - -fi - - - - # OS/390 lacks sys/param.h (and doesn't need it, by chance). - -for ac_header in sys/param.h -do -as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 -else - # Is the header compilable? -echo "$as_me:$LINENO: checking $ac_header usability" >&5 -echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -$ac_includes_default -#include <$ac_header> -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_header_compiler=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_header_compiler=no -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 -echo "${ECHO_T}$ac_header_compiler" >&6 - -# Is the header present? -echo "$as_me:$LINENO: checking $ac_header presence" >&5 -echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include <$ac_header> -_ACEOF -if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 - (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } >/dev/null; then - if test -s conftest.err; then - ac_cpp_err=$ac_c_preproc_warn_flag - ac_cpp_err=$ac_cpp_err$ac_c_werror_flag - else - ac_cpp_err= - fi -else - ac_cpp_err=yes -fi -if test -z "$ac_cpp_err"; then - ac_header_preproc=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_header_preproc=no -fi -rm -f conftest.err conftest.$ac_ext -echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 -echo "${ECHO_T}$ac_header_preproc" >&6 - -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in - yes:no: ) - { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 -echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} - ac_header_preproc=yes - ;; - no:yes:* ) - { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 -echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 -echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 -echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 -echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 -echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} - { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 -echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} - ( - cat <<\_ASBOX -## ------------------------------ ## -## Report this to the tls lists. ## -## ------------------------------ ## -_ASBOX - ) | - sed "s/^/$as_me: WARNING: /" >&2 - ;; -esac -echo "$as_me:$LINENO: checking for $ac_header" >&5 -echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 -if eval "test \"\${$as_ac_Header+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - eval "$as_ac_Header=\$ac_header_preproc" -fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 - -fi -if test `eval echo '${'$as_ac_Header'}'` = yes; then - cat >>confdefs.h <<_ACEOF -#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF - -fi - -done - - - # Let the user call this, because if it triggers, they will - # need a compat/strtod.c that is correct. Users can also - # use Tcl_GetDouble(FromObj) instead. - #TEA_BUGGY_STRTOD - fi - - -#----------------------------------------------------------------------- -# __CHANGE__ -# Specify the C source files to compile in TEA_ADD_SOURCES, -# public headers that need to be installed in TEA_ADD_HEADERS, -# stub library C source files to compile in TEA_ADD_STUB_SOURCES, -# and runtime Tcl library files in TEA_ADD_TCL_SOURCES. -# This defines PKG(_STUB)_SOURCES, PKG(_STUB)_OBJECTS, PKG_HEADERS -# and PKG_TCL_SOURCES. -#----------------------------------------------------------------------- - - - vars="" - for i in $vars; do - case $i in - \$*) - # allow $-var names - PKG_SOURCES="$PKG_SOURCES $i" - PKG_OBJECTS="$PKG_OBJECTS $i" - ;; - *) - # check for existence - allows for generic/win/unix VPATH - # To add more dirs here (like 'src'), you have to update VPATH - # in Makefile.in as well - if test ! -f "${srcdir}/$i" -a ! -f "${srcdir}/generic/$i" \ - -a ! -f "${srcdir}/win/$i" -a ! -f "${srcdir}/unix/$i" \ - ; then - { { echo "$as_me:$LINENO: error: could not find source file '$i'" >&5 -echo "$as_me: error: could not find source file '$i'" >&2;} - { (exit 1); exit 1; }; } - fi - PKG_SOURCES="$PKG_SOURCES $i" - # this assumes it is in a VPATH dir - i=`basename $i` - # handle user calling this before or after TEA_SETUP_COMPILER - if test x"${OBJEXT}" != x ; then - j="`echo $i | sed -e 's/\.[^.]*$//'`.${OBJEXT}" - else - j="`echo $i | sed -e 's/\.[^.]*$//'`.\${OBJEXT}" - fi - PKG_OBJECTS="$PKG_OBJECTS $j" - ;; - esac - done - - - - - vars="" - for i in $vars; do - # check for existence, be strict because it is installed - if test ! -f "${srcdir}/$i" ; then - { { echo "$as_me:$LINENO: error: could not find header file '${srcdir}/$i'" >&5 -echo "$as_me: error: could not find header file '${srcdir}/$i'" >&2;} - { (exit 1); exit 1; }; } - fi - PKG_HEADERS="$PKG_HEADERS $i" - done - - - - vars="" - for i in $vars; do - PKG_INCLUDES="$PKG_INCLUDES $i" - done - - - - vars="" - for i in $vars; do - if test "${TEA_PLATFORM}" = "windows" -a "$GCC" = "yes" ; then - # Convert foo.lib to -lfoo for GCC. No-op if not *.lib - i=`echo "$i" | sed -e 's/^\([^-].*\)\.lib$/-l\1/i'` - fi - PKG_LIBS="$PKG_LIBS $i" - done - - - - PKG_CFLAGS="$PKG_CFLAGS " - - - - vars="" - for i in $vars; do - # check for existence - allows for generic/win/unix VPATH - if test ! -f "${srcdir}/$i" -a ! -f "${srcdir}/generic/$i" \ - -a ! -f "${srcdir}/win/$i" -a ! -f "${srcdir}/unix/$i" \ - ; then - { { echo "$as_me:$LINENO: error: could not find stub source file '$i'" >&5 -echo "$as_me: error: could not find stub source file '$i'" >&2;} - { (exit 1); exit 1; }; } - fi - PKG_STUB_SOURCES="$PKG_STUB_SOURCES $i" - # this assumes it is in a VPATH dir - i=`basename $i` - # handle user calling this before or after TEA_SETUP_COMPILER - if test x"${OBJEXT}" != x ; then - j="`echo $i | sed -e 's/\.[^.]*$//'`.${OBJEXT}" - else - j="`echo $i | sed -e 's/\.[^.]*$//'`.\${OBJEXT}" - fi - PKG_STUB_OBJECTS="$PKG_STUB_OBJECTS $j" - done - - - - - vars="" - for i in $vars; do - # check for existence, be strict because it is installed - if test ! -f "${srcdir}/$i" ; then - { { echo "$as_me:$LINENO: error: could not find tcl source file '${srcdir}/$i'" >&5 -echo "$as_me: error: could not find tcl source file '${srcdir}/$i'" >&2;} - { (exit 1); exit 1; }; } - fi - PKG_TCL_SOURCES="$PKG_TCL_SOURCES $i" - done - - - -#-------------------------------------------------------------------- -# A few miscellaneous platform-specific items: -# -# Define a special symbol for Windows (BUILD_sample in this case) so -# that we create the export library with the dll. See sha1.h on how -# to use this. -# -# Windows creates a few extra files that need to be cleaned up. -# You can add more files to clean if your extension creates any extra -# files. -# -# Define any extra compiler flags in the PACKAGE_CFLAGS variable. -# These will be appended to the current set of compiler flags for -# your system. -#-------------------------------------------------------------------- - -if test "${TEA_PLATFORM}" = "windows" ; then - cat >>confdefs.h <<\_ACEOF -#define BUILD_tls 1 -_ACEOF - - cat >>confdefs.h <<\_ACEOF -#define WINDOWS 1 -_ACEOF - - CLEANFILES="pkgIndex.tcl *.lib *.dll *.exp *.ilk *.pdb vc*.pch" -else - CLEANFILES="pkgIndex.tcl" -fi - - -#-------------------------------------------------------------------- -# Choose which headers you need. Extension authors should try very -# hard to only rely on the Tcl public header files. Internal headers -# contain private data structures and are subject to change without -# notice. -# This MUST be called after TEA_LOAD_TCLCONFIG / TEA_LOAD_TKCONFIG -#-------------------------------------------------------------------- - - - echo "$as_me:$LINENO: checking for Tcl public headers" >&5 -echo $ECHO_N "checking for Tcl public headers... $ECHO_C" >&6 - - -# Check whether --with-tclinclude or --without-tclinclude was given. -if test "${with_tclinclude+set}" = set; then - withval="$with_tclinclude" - with_tclinclude=${withval} -fi; - - if test "${ac_cv_c_tclh+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - - # Use the value from --with-tclinclude, if it was given - - if test x"${with_tclinclude}" != x ; then - if test -f "${with_tclinclude}/tcl.h" ; then - ac_cv_c_tclh=${with_tclinclude} - else - { { echo "$as_me:$LINENO: error: ${with_tclinclude} directory does not contain tcl.h" >&5 -echo "$as_me: error: ${with_tclinclude} directory does not contain tcl.h" >&2;} - { (exit 1); exit 1; }; } - fi - else - list="" - if test "`uname -s`" = "Darwin"; then - # If Tcl was built as a framework, attempt to use - # the framework's Headers directory - case ${TCL_DEFS} in - *TCL_FRAMEWORK*) - list="`ls -d ${TCL_BIN_DIR}/Headers 2>/dev/null`" - ;; - esac - fi - - # Look in the source dir only if Tcl is not installed, - # and in that situation, look there before installed locations. - if test -f "${TCL_BIN_DIR}/Makefile" ; then - list="$list `ls -d ${TCL_SRC_DIR}/generic 2>/dev/null`" - fi - - # Check order: pkg --prefix location, Tcl's --prefix location, - # relative to directory of tclConfig.sh. - - eval "temp_includedir=${includedir}" - list="$list \ - `ls -d ${temp_includedir} 2>/dev/null` \ - `ls -d ${TCL_PREFIX}/include 2>/dev/null` \ - `ls -d ${TCL_BIN_DIR}/../include 2>/dev/null`" - if test "${TEA_PLATFORM}" != "windows" -o "$GCC" = "yes"; then - list="$list /usr/local/include /usr/include" - if test x"${TCL_INCLUDE_SPEC}" != x ; then - d=`echo "${TCL_INCLUDE_SPEC}" | sed -e 's/^-I//'` - list="$list `ls -d ${d} 2>/dev/null`" - fi - fi - for i in $list ; do - if test -f "$i/tcl.h" ; then - ac_cv_c_tclh=$i - break - fi - done - fi - -fi - - - # Print a message based on how we determined the include path - - if test x"${ac_cv_c_tclh}" = x ; then - { { echo "$as_me:$LINENO: error: tcl.h not found. Please specify its location with --with-tclinclude" >&5 -echo "$as_me: error: tcl.h not found. Please specify its location with --with-tclinclude" >&2;} - { (exit 1); exit 1; }; } - else - echo "$as_me:$LINENO: result: ${ac_cv_c_tclh}" >&5 -echo "${ECHO_T}${ac_cv_c_tclh}" >&6 - fi - - # Convert to a native path and substitute into the output files. - - INCLUDE_DIR_NATIVE=`${CYGPATH} ${ac_cv_c_tclh}` - - TCL_INCLUDES=-I\"${INCLUDE_DIR_NATIVE}\" - - - - -#-------------------------------------------------------------------- -# Check whether --enable-threads or --disable-threads was given. -#-------------------------------------------------------------------- - - - # Check whether --enable-threads or --disable-threads was given. -if test "${enable_threads+set}" = set; then - enableval="$enable_threads" - tcl_ok=$enableval -else - tcl_ok=yes -fi; - - if test "${enable_threads+set}" = set; then - enableval="$enable_threads" - tcl_ok=$enableval - else - tcl_ok=yes - fi - - if test "$tcl_ok" = "yes" -o "${TCL_THREADS}" = 1; then - TCL_THREADS=1 - - if test "${TEA_PLATFORM}" != "windows" ; then - # We are always OK on Windows, so check what this platform wants: - - # USE_THREAD_ALLOC tells us to try the special thread-based - # allocator that significantly reduces lock contention - -cat >>confdefs.h <<\_ACEOF -#define USE_THREAD_ALLOC 1 -_ACEOF - - -cat >>confdefs.h <<\_ACEOF -#define _REENTRANT 1 -_ACEOF - - if test "`uname -s`" = "SunOS" ; then - -cat >>confdefs.h <<\_ACEOF -#define _POSIX_PTHREAD_SEMANTICS 1 -_ACEOF - - fi - -cat >>confdefs.h <<\_ACEOF -#define _THREAD_SAFE 1 -_ACEOF - - echo "$as_me:$LINENO: checking for pthread_mutex_init in -lpthread" >&5 -echo $ECHO_N "checking for pthread_mutex_init in -lpthread... $ECHO_C" >&6 -if test "${ac_cv_lib_pthread_pthread_mutex_init+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lpthread $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char pthread_mutex_init (); -int -main () -{ -pthread_mutex_init (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_pthread_pthread_mutex_init=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_lib_pthread_pthread_mutex_init=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_pthread_pthread_mutex_init" >&5 -echo "${ECHO_T}$ac_cv_lib_pthread_pthread_mutex_init" >&6 -if test $ac_cv_lib_pthread_pthread_mutex_init = yes; then - tcl_ok=yes -else - tcl_ok=no -fi - - if test "$tcl_ok" = "no"; then - # Check a little harder for __pthread_mutex_init in the same - # library, as some systems hide it there until pthread.h is - # defined. We could alternatively do an AC_TRY_COMPILE with - # pthread.h, but that will work with libpthread really doesn't - # exist, like AIX 4.2. [Bug: 4359] - echo "$as_me:$LINENO: checking for __pthread_mutex_init in -lpthread" >&5 -echo $ECHO_N "checking for __pthread_mutex_init in -lpthread... $ECHO_C" >&6 -if test "${ac_cv_lib_pthread___pthread_mutex_init+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lpthread $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char __pthread_mutex_init (); -int -main () -{ -__pthread_mutex_init (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_pthread___pthread_mutex_init=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_lib_pthread___pthread_mutex_init=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_pthread___pthread_mutex_init" >&5 -echo "${ECHO_T}$ac_cv_lib_pthread___pthread_mutex_init" >&6 -if test $ac_cv_lib_pthread___pthread_mutex_init = yes; then - tcl_ok=yes -else - tcl_ok=no -fi - - fi - - if test "$tcl_ok" = "yes"; then - # The space is needed - THREADS_LIBS=" -lpthread" - else - echo "$as_me:$LINENO: checking for pthread_mutex_init in -lpthreads" >&5 -echo $ECHO_N "checking for pthread_mutex_init in -lpthreads... $ECHO_C" >&6 -if test "${ac_cv_lib_pthreads_pthread_mutex_init+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lpthreads $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char pthread_mutex_init (); -int -main () -{ -pthread_mutex_init (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_pthreads_pthread_mutex_init=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_lib_pthreads_pthread_mutex_init=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_pthreads_pthread_mutex_init" >&5 -echo "${ECHO_T}$ac_cv_lib_pthreads_pthread_mutex_init" >&6 -if test $ac_cv_lib_pthreads_pthread_mutex_init = yes; then - tcl_ok=yes -else - tcl_ok=no -fi - - if test "$tcl_ok" = "yes"; then - # The space is needed - THREADS_LIBS=" -lpthreads" - else - echo "$as_me:$LINENO: checking for pthread_mutex_init in -lc" >&5 -echo $ECHO_N "checking for pthread_mutex_init in -lc... $ECHO_C" >&6 -if test "${ac_cv_lib_c_pthread_mutex_init+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lc $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char pthread_mutex_init (); -int -main () -{ -pthread_mutex_init (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_c_pthread_mutex_init=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_lib_c_pthread_mutex_init=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_c_pthread_mutex_init" >&5 -echo "${ECHO_T}$ac_cv_lib_c_pthread_mutex_init" >&6 -if test $ac_cv_lib_c_pthread_mutex_init = yes; then - tcl_ok=yes -else - tcl_ok=no -fi - - if test "$tcl_ok" = "no"; then - echo "$as_me:$LINENO: checking for pthread_mutex_init in -lc_r" >&5 -echo $ECHO_N "checking for pthread_mutex_init in -lc_r... $ECHO_C" >&6 -if test "${ac_cv_lib_c_r_pthread_mutex_init+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lc_r $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char pthread_mutex_init (); -int -main () -{ -pthread_mutex_init (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_c_r_pthread_mutex_init=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_lib_c_r_pthread_mutex_init=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_c_r_pthread_mutex_init" >&5 -echo "${ECHO_T}$ac_cv_lib_c_r_pthread_mutex_init" >&6 -if test $ac_cv_lib_c_r_pthread_mutex_init = yes; then - tcl_ok=yes -else - tcl_ok=no -fi - - if test "$tcl_ok" = "yes"; then - # The space is needed - THREADS_LIBS=" -pthread" - else - TCL_THREADS=0 - { echo "$as_me:$LINENO: WARNING: Do not know how to find pthread lib on your system - thread support disabled" >&5 -echo "$as_me: WARNING: Do not know how to find pthread lib on your system - thread support disabled" >&2;} - fi - fi - fi - fi - fi - else - TCL_THREADS=0 - fi - # Do checking message here to not mess up interleaved configure output - echo "$as_me:$LINENO: checking for building with threads" >&5 -echo $ECHO_N "checking for building with threads... $ECHO_C" >&6 - if test "${TCL_THREADS}" = 1; then - -cat >>confdefs.h <<\_ACEOF -#define TCL_THREADS 1 -_ACEOF - - echo "$as_me:$LINENO: result: yes (default)" >&5 -echo "${ECHO_T}yes (default)" >&6 - else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 - fi - # TCL_THREADS sanity checking. See if our request for building with - # threads is the same as the way Tcl was built. If not, warn the user. - case ${TCL_DEFS} in - *THREADS=1*) - if test "${TCL_THREADS}" = "0"; then - { echo "$as_me:$LINENO: WARNING: - Building ${PACKAGE_NAME} without threads enabled, but building against Tcl - that IS thread-enabled. It is recommended to use --enable-threads." >&5 -echo "$as_me: WARNING: - Building ${PACKAGE_NAME} without threads enabled, but building against Tcl - that IS thread-enabled. It is recommended to use --enable-threads." >&2;} - fi - ;; - *) - if test "${TCL_THREADS}" = "1"; then - { echo "$as_me:$LINENO: WARNING: - --enable-threads requested, but building against a Tcl that is NOT - thread-enabled. This is an OK configuration that will also run in - a thread-enabled core." >&5 -echo "$as_me: WARNING: - --enable-threads requested, but building against a Tcl that is NOT - thread-enabled. This is an OK configuration that will also run in - a thread-enabled core." >&2;} - fi - ;; - esac - - - -#-------------------------------------------------------------------- -# The statement below defines a collection of symbols related to -# building as a shared library instead of a static library. -#-------------------------------------------------------------------- - - - echo "$as_me:$LINENO: checking how to build libraries" >&5 -echo $ECHO_N "checking how to build libraries... $ECHO_C" >&6 - # Check whether --enable-shared or --disable-shared was given. -if test "${enable_shared+set}" = set; then - enableval="$enable_shared" - tcl_ok=$enableval -else - tcl_ok=yes -fi; - - if test "${enable_shared+set}" = set; then - enableval="$enable_shared" - tcl_ok=$enableval - else - tcl_ok=yes - fi - - if test "$tcl_ok" = "yes" ; then - echo "$as_me:$LINENO: result: shared" >&5 -echo "${ECHO_T}shared" >&6 - SHARED_BUILD=1 - else - echo "$as_me:$LINENO: result: static" >&5 -echo "${ECHO_T}static" >&6 - SHARED_BUILD=0 - -cat >>confdefs.h <<\_ACEOF -#define STATIC_BUILD 1 -_ACEOF - - fi - - - -#-------------------------------------------------------------------- -# This macro figures out what flags to use with the compiler/linker -# when building shared/static debug/optimized objects. This information -# can be taken from the tclConfig.sh file, but this figures it all out. -#-------------------------------------------------------------------- - - - - - # Step 0.a: Enable 64 bit support? - - echo "$as_me:$LINENO: checking if 64bit support is requested" >&5 -echo $ECHO_N "checking if 64bit support is requested... $ECHO_C" >&6 - # Check whether --enable-64bit or --disable-64bit was given. -if test "${enable_64bit+set}" = set; then - enableval="$enable_64bit" - do64bit=$enableval -else - do64bit=no -fi; - echo "$as_me:$LINENO: result: $do64bit" >&5 -echo "${ECHO_T}$do64bit" >&6 - - # Step 0.b: Enable Solaris 64 bit VIS support? - - echo "$as_me:$LINENO: checking if 64bit Sparc VIS support is requested" >&5 -echo $ECHO_N "checking if 64bit Sparc VIS support is requested... $ECHO_C" >&6 - # Check whether --enable-64bit-vis or --disable-64bit-vis was given. -if test "${enable_64bit_vis+set}" = set; then - enableval="$enable_64bit_vis" - do64bitVIS=$enableval -else - do64bitVIS=no -fi; - echo "$as_me:$LINENO: result: $do64bitVIS" >&5 -echo "${ECHO_T}$do64bitVIS" >&6 - # Force 64bit on with VIS - if test "$do64bitVIS" = "yes"; then - do64bit=yes -fi - - - # Step 0.c: Check if visibility support is available. Do this here so - # that platform specific alternatives can be used below if this fails. - - echo "$as_me:$LINENO: checking if compiler supports visibility \"hidden\"" >&5 -echo $ECHO_N "checking if compiler supports visibility \"hidden\"... $ECHO_C" >&6 -if test "${tcl_cv_cc_visibility_hidden+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - - hold_cflags=$CFLAGS; CFLAGS="$CFLAGS -Werror" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - - extern __attribute__((__visibility__("hidden"))) void f(void); - void f(void) {} -int -main () -{ -f(); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - tcl_cv_cc_visibility_hidden=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -tcl_cv_cc_visibility_hidden=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - CFLAGS=$hold_cflags -fi -echo "$as_me:$LINENO: result: $tcl_cv_cc_visibility_hidden" >&5 -echo "${ECHO_T}$tcl_cv_cc_visibility_hidden" >&6 - if test $tcl_cv_cc_visibility_hidden = yes; then - - -cat >>confdefs.h <<\_ACEOF -#define MODULE_SCOPE extern __attribute__((__visibility__("hidden"))) -_ACEOF - - -fi - - - # Step 0.d: Disable -rpath support? - - echo "$as_me:$LINENO: checking if rpath support is requested" >&5 -echo $ECHO_N "checking if rpath support is requested... $ECHO_C" >&6 - # Check whether --enable-rpath or --disable-rpath was given. -if test "${enable_rpath+set}" = set; then - enableval="$enable_rpath" - doRpath=$enableval -else - doRpath=yes -fi; - echo "$as_me:$LINENO: result: $doRpath" >&5 -echo "${ECHO_T}$doRpath" >&6 - - # TEA specific: Cross-compiling options for Windows/CE builds? - - if test "${TEA_PLATFORM}" = windows; then - - echo "$as_me:$LINENO: checking if Windows/CE build is requested" >&5 -echo $ECHO_N "checking if Windows/CE build is requested... $ECHO_C" >&6 - # Check whether --enable-wince or --disable-wince was given. -if test "${enable_wince+set}" = set; then - enableval="$enable_wince" - doWince=$enableval -else - doWince=no -fi; - echo "$as_me:$LINENO: result: $doWince" >&5 -echo "${ECHO_T}$doWince" >&6 - -fi - - - # Step 1: set the variable "system" to hold the name and version number - # for the system. - - - echo "$as_me:$LINENO: checking system version" >&5 -echo $ECHO_N "checking system version... $ECHO_C" >&6 -if test "${tcl_cv_sys_version+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - - # TEA specific: - if test "${TEA_PLATFORM}" = "windows" ; then - tcl_cv_sys_version=windows - elif test -f /usr/lib/NextStep/software_version; then - tcl_cv_sys_version=NEXTSTEP-`awk '/3/,/3/' /usr/lib/NextStep/software_version` - else - tcl_cv_sys_version=`uname -s`-`uname -r` - if test "$?" -ne 0 ; then - { echo "$as_me:$LINENO: WARNING: can't find uname command" >&5 -echo "$as_me: WARNING: can't find uname command" >&2;} - tcl_cv_sys_version=unknown - else - # Special check for weird MP-RAS system (uname returns weird - # results, and the version is kept in special file). - - if test -r /etc/.relid -a "X`uname -n`" = "X`uname -s`" ; then - tcl_cv_sys_version=MP-RAS-`awk '{print $3}' /etc/.relid` - fi - if test "`uname -s`" = "AIX" ; then - tcl_cv_sys_version=AIX-`uname -v`.`uname -r` - fi - fi - fi - -fi -echo "$as_me:$LINENO: result: $tcl_cv_sys_version" >&5 -echo "${ECHO_T}$tcl_cv_sys_version" >&6 - system=$tcl_cv_sys_version - - - # Step 2: check for existence of -ldl library. This is needed because - # Linux can use either -ldl or -ldld for dynamic loading. - - echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 -echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6 -if test "${ac_cv_lib_dl_dlopen+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldl $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char dlopen (); -int -main () -{ -dlopen (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_dl_dlopen=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_lib_dl_dlopen=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 -echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6 -if test $ac_cv_lib_dl_dlopen = yes; then - have_dl=yes -else - have_dl=no -fi - - - # Require ranlib early so we can override it in special cases below. - - - - # Step 3: set configuration options based on system name and version. - # This is similar to Tcl's unix/tcl.m4 except that we've added a - # "windows" case. - - do64bit_ok=no - LDFLAGS_ORIG="$LDFLAGS" - # When ld needs options to work in 64-bit mode, put them in - # LDFLAGS_ARCH so they eventually end up in LDFLAGS even if [load] - # is disabled by the user. [Bug 1016796] - LDFLAGS_ARCH="" - UNSHARED_LIB_SUFFIX="" - # TEA specific: use PACKAGE_VERSION instead of VERSION - TCL_TRIM_DOTS='`echo ${PACKAGE_VERSION} | tr -d .`' - ECHO_VERSION='`echo ${PACKAGE_VERSION}`' - TCL_LIB_VERSIONS_OK=ok - CFLAGS_DEBUG=-g - CFLAGS_OPTIMIZE=-O - if test "$GCC" = yes; then - - # TEA specific: - CFLAGS_OPTIMIZE=-O2 - CFLAGS_WARNING="-Wall" - -else - CFLAGS_WARNING="" -fi - - # Extract the first word of "ar", so it can be a program name with args. -set dummy ar; ac_word=$2 -echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 -if test "${ac_cv_prog_AR+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$AR"; then - ac_cv_prog_AR="$AR" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_AR="ar" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done - -fi -fi -AR=$ac_cv_prog_AR -if test -n "$AR"; then - echo "$as_me:$LINENO: result: $AR" >&5 -echo "${ECHO_T}$AR" >&6 -else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 -fi - - STLIB_LD='${AR} cr' - LD_LIBRARY_PATH_VAR="LD_LIBRARY_PATH" - if test "x$SHLIB_VERSION" = x; then - SHLIB_VERSION="1.0" -fi - - case $system in - # TEA specific: - windows) - # This is a 2-stage check to make sure we have the 64-bit SDK - # We have to know where the SDK is installed. - # This magic is based on MS Platform SDK for Win2003 SP1 - hobbs - # MACHINE is IX86 for LINK, but this is used by the manifest, - # which requires x86|amd64|ia64. - MACHINE="X86" - if test "$do64bit" != "no" ; then - if test "x${MSSDK}x" = "xx" ; then - MSSDK="C:/Progra~1/Microsoft Platform SDK" - fi - MSSDK=`echo "$MSSDK" | sed -e 's!\\\!/!g'` - PATH64="" - case "$do64bit" in - amd64|x64|yes) - MACHINE="AMD64" ; # default to AMD64 64-bit build - PATH64="${MSSDK}/Bin/Win64/x86/AMD64" - ;; - ia64) - MACHINE="IA64" - PATH64="${MSSDK}/Bin/Win64" - ;; - esac - if test ! -d "${PATH64}" ; then - { echo "$as_me:$LINENO: WARNING: Could not find 64-bit $MACHINE SDK to enable 64bit mode" >&5 -echo "$as_me: WARNING: Could not find 64-bit $MACHINE SDK to enable 64bit mode" >&2;} - { echo "$as_me:$LINENO: WARNING: Ensure latest Platform SDK is installed" >&5 -echo "$as_me: WARNING: Ensure latest Platform SDK is installed" >&2;} - do64bit="no" - else - echo "$as_me:$LINENO: result: Using 64-bit $MACHINE mode" >&5 -echo "${ECHO_T} Using 64-bit $MACHINE mode" >&6 - do64bit_ok="yes" - fi - fi - - if test "$doWince" != "no" ; then - if test "$do64bit" != "no" ; then - { { echo "$as_me:$LINENO: error: Windows/CE and 64-bit builds incompatible" >&5 -echo "$as_me: error: Windows/CE and 64-bit builds incompatible" >&2;} - { (exit 1); exit 1; }; } - fi - if test "$GCC" = "yes" ; then - { { echo "$as_me:$LINENO: error: Windows/CE and GCC builds incompatible" >&5 -echo "$as_me: error: Windows/CE and GCC builds incompatible" >&2;} - { (exit 1); exit 1; }; } - fi - - # First, look for one uninstalled. - # the alternative search directory is invoked by --with-celib - - if test x"${no_celib}" = x ; then - # we reset no_celib in case something fails here - no_celib=true - -# Check whether --with-celib or --without-celib was given. -if test "${with_celib+set}" = set; then - withval="$with_celib" - with_celibconfig=${withval} -fi; - echo "$as_me:$LINENO: checking for Windows/CE celib directory" >&5 -echo $ECHO_N "checking for Windows/CE celib directory... $ECHO_C" >&6 - if test "${ac_cv_c_celibconfig+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - - # First check to see if --with-celibconfig was specified. - if test x"${with_celibconfig}" != x ; then - if test -d "${with_celibconfig}/inc" ; then - ac_cv_c_celibconfig=`(cd ${with_celibconfig}; pwd)` - else - { { echo "$as_me:$LINENO: error: ${with_celibconfig} directory doesn't contain inc directory" >&5 -echo "$as_me: error: ${with_celibconfig} directory doesn't contain inc directory" >&2;} - { (exit 1); exit 1; }; } - fi - fi - - # then check for a celib library - if test x"${ac_cv_c_celibconfig}" = x ; then - for i in \ - ../celib-palm-3.0 \ - ../celib \ - ../../celib-palm-3.0 \ - ../../celib \ - `ls -dr ../celib-*3.[0-9]* 2>/dev/null` \ - ${srcdir}/../celib-palm-3.0 \ - ${srcdir}/../celib \ - `ls -dr ${srcdir}/../celib-*3.[0-9]* 2>/dev/null` \ - ; do - if test -d "$i/inc" ; then - ac_cv_c_celibconfig=`(cd $i; pwd)` - break - fi - done - fi - -fi - - if test x"${ac_cv_c_celibconfig}" = x ; then - { { echo "$as_me:$LINENO: error: Cannot find celib support library directory" >&5 -echo "$as_me: error: Cannot find celib support library directory" >&2;} - { (exit 1); exit 1; }; } - else - no_celib= - CELIB_DIR=${ac_cv_c_celibconfig} - CELIB_DIR=`echo "$CELIB_DIR" | sed -e 's!\\\!/!g'` - echo "$as_me:$LINENO: result: found $CELIB_DIR" >&5 -echo "${ECHO_T}found $CELIB_DIR" >&6 - fi - fi - - # Set defaults for common evc4/PPC2003 setup - # Currently Tcl requires 300+, possibly 420+ for sockets - CEVERSION=420; # could be 211 300 301 400 420 ... - TARGETCPU=ARMV4; # could be ARMV4 ARM MIPS SH3 X86 ... - ARCH=ARM; # could be ARM MIPS X86EM ... - PLATFORM="Pocket PC 2003"; # or "Pocket PC 2002" - if test "$doWince" != "yes"; then - # If !yes then the user specified something - # Reset ARCH to allow user to skip specifying it - ARCH= - eval `echo $doWince | awk -F, '{ \ - if (length($1)) { printf "CEVERSION=\"%s\"\n", $1; \ - if ($1 < 400) { printf "PLATFORM=\"Pocket PC 2002\"\n" } }; \ - if (length($2)) { printf "TARGETCPU=\"%s\"\n", toupper($2) }; \ - if (length($3)) { printf "ARCH=\"%s\"\n", toupper($3) }; \ - if (length($4)) { printf "PLATFORM=\"%s\"\n", $4 }; \ - }'` - if test "x${ARCH}" = "x" ; then - ARCH=$TARGETCPU; - fi - fi - OSVERSION=WCE$CEVERSION; - if test "x${WCEROOT}" = "x" ; then - WCEROOT="C:/Program Files/Microsoft eMbedded C++ 4.0" - if test ! -d "${WCEROOT}" ; then - WCEROOT="C:/Program Files/Microsoft eMbedded Tools" - fi - fi - if test "x${SDKROOT}" = "x" ; then - SDKROOT="C:/Program Files/Windows CE Tools" - if test ! -d "${SDKROOT}" ; then - SDKROOT="C:/Windows CE Tools" - fi - fi - WCEROOT=`echo "$WCEROOT" | sed -e 's!\\\!/!g'` - SDKROOT=`echo "$SDKROOT" | sed -e 's!\\\!/!g'` - if test ! -d "${SDKROOT}/${OSVERSION}/${PLATFORM}/Lib/${TARGETCPU}" \ - -o ! -d "${WCEROOT}/EVC/${OSVERSION}/bin"; then - { { echo "$as_me:$LINENO: error: could not find PocketPC SDK or target compiler to enable WinCE mode $CEVERSION,$TARGETCPU,$ARCH,$PLATFORM" >&5 -echo "$as_me: error: could not find PocketPC SDK or target compiler to enable WinCE mode $CEVERSION,$TARGETCPU,$ARCH,$PLATFORM" >&2;} - { (exit 1); exit 1; }; } - doWince="no" - else - # We could PATH_NOSPACE these, but that's not important, - # as long as we quote them when used. - CEINCLUDE="${SDKROOT}/${OSVERSION}/${PLATFORM}/include" - if test -d "${CEINCLUDE}/${TARGETCPU}" ; then - CEINCLUDE="${CEINCLUDE}/${TARGETCPU}" - fi - CELIBPATH="${SDKROOT}/${OSVERSION}/${PLATFORM}/Lib/${TARGETCPU}" - fi - fi - - if test "$GCC" != "yes" ; then - if test "${SHARED_BUILD}" = "0" ; then - runtime=-MT - else - runtime=-MD - fi - - if test "$do64bit" != "no" ; then - # All this magic is necessary for the Win64 SDK RC1 - hobbs - CC="\"${PATH64}/cl.exe\"" - CFLAGS="${CFLAGS} -I\"${MSSDK}/Include\" -I\"${MSSDK}/Include/crt\" -I\"${MSSDK}/Include/crt/sys\"" - RC="\"${MSSDK}/bin/rc.exe\"" - lflags="-nologo -MACHINE:${MACHINE} -LIBPATH:\"${MSSDK}/Lib/${MACHINE}\"" - LINKBIN="\"${PATH64}/link.exe\"" - CFLAGS_DEBUG="-nologo -Zi -Od -W3 ${runtime}d" - CFLAGS_OPTIMIZE="-nologo -O2 -W2 ${runtime}" - # Avoid 'unresolved external symbol __security_cookie' - # errors, c.f. http://support.microsoft.com/?id=894573 - - vars="bufferoverflowU.lib" - for i in $vars; do - if test "${TEA_PLATFORM}" = "windows" -a "$GCC" = "yes" ; then - # Convert foo.lib to -lfoo for GCC. No-op if not *.lib - i=`echo "$i" | sed -e 's/^\([^-].*\)\.lib$/-l\1/i'` - fi - PKG_LIBS="$PKG_LIBS $i" - done - - - elif test "$doWince" != "no" ; then - CEBINROOT="${WCEROOT}/EVC/${OSVERSION}/bin" - if test "${TARGETCPU}" = "X86"; then - CC="\"${CEBINROOT}/cl.exe\"" - else - CC="\"${CEBINROOT}/cl${ARCH}.exe\"" - fi - CFLAGS="$CFLAGS -I\"${CELIB_DIR}/inc\" -I\"${CEINCLUDE}\"" - RC="\"${WCEROOT}/Common/EVC/bin/rc.exe\"" - arch=`echo ${ARCH} | awk '{print tolower($0)}'` - defs="${ARCH} _${ARCH}_ ${arch} PALM_SIZE _MT _WINDOWS" - if test "${SHARED_BUILD}" = "1" ; then - # Static CE builds require static celib as well - defs="${defs} _DLL" - fi - for i in $defs ; do - -cat >>confdefs.h <<_ACEOF -#define $i 1 -_ACEOF - - done - -cat >>confdefs.h <<_ACEOF -#define _WIN32_WCE $CEVERSION -_ACEOF - - -cat >>confdefs.h <<_ACEOF -#define UNDER_CE $CEVERSION -_ACEOF - - CFLAGS_DEBUG="-nologo -Zi -Od" - CFLAGS_OPTIMIZE="-nologo -Ox" - lversion=`echo ${CEVERSION} | sed -e 's/\(.\)\(..\)/\1\.\2/'` - lflags="-MACHINE:${ARCH} -LIBPATH:\"${CELIBPATH}\" -subsystem:windowsce,${lversion} -nologo" - LINKBIN="\"${CEBINROOT}/link.exe\"" - - else - RC="rc" - lflags="-nologo" - LINKBIN="link" - CFLAGS_DEBUG="-nologo -Z7 -Od -W3 -WX ${runtime}d" - CFLAGS_OPTIMIZE="-nologo -O2 -W2 ${runtime}" - fi - fi - - if test "$GCC" = "yes"; then - # mingw gcc mode - RC="windres" - CFLAGS_DEBUG="-g" - CFLAGS_OPTIMIZE="-O2 -fomit-frame-pointer" - SHLIB_LD="$CC -shared" - UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.a' - LDFLAGS_CONSOLE="-wl,--subsystem,console ${lflags}" - LDFLAGS_WINDOW="-wl,--subsystem,windows ${lflags}" - else - SHLIB_LD="${LINKBIN} -dll ${lflags}" - # link -lib only works when -lib is the first arg - STLIB_LD="${LINKBIN} -lib ${lflags}" - UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.lib' - PATHTYPE=-w - # For information on what debugtype is most useful, see: - # http://msdn.microsoft.com/library/en-us/dnvc60/html/gendepdebug.asp - # and also - # http://msdn2.microsoft.com/en-us/library/y0zzbyt4%28VS.80%29.aspx - # This essentially turns it all on. - LDFLAGS_DEBUG="-debug -debugtype:cv" - LDFLAGS_OPTIMIZE="-release" - if test "$doWince" != "no" ; then - LDFLAGS_CONSOLE="-link ${lflags}" - LDFLAGS_WINDOW=${LDFLAGS_CONSOLE} - else - LDFLAGS_CONSOLE="-link -subsystem:console ${lflags}" - LDFLAGS_WINDOW="-link -subsystem:windows ${lflags}" - fi - fi - - SHLIB_LD_LIBS='${LIBS}' - SHLIB_SUFFIX=".dll" - SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.dll' - - TCL_LIB_VERSIONS_OK=nodots - # Bogus to avoid getting this turned off - DL_OBJS="tclLoadNone.obj" - ;; - AIX-*) - if test "${TCL_THREADS}" = "1" -a "$GCC" != "yes"; then - - # AIX requires the _r compiler when gcc isn't being used - case "${CC}" in - *_r|*_r\ *) - # ok ... - ;; - *) - # Make sure only first arg gets _r - CC=`echo "$CC" | sed -e 's/^\([^ ]*\)/\1_r/'` - ;; - esac - echo "$as_me:$LINENO: result: Using $CC for compiling with threads" >&5 -echo "${ECHO_T}Using $CC for compiling with threads" >&6 - -fi - - LIBS="$LIBS -lc" - SHLIB_CFLAGS="" - SHLIB_LD_LIBS='${LIBS}' - SHLIB_SUFFIX=".so" - - DL_OBJS="tclLoadDl.o" - LD_LIBRARY_PATH_VAR="LIBPATH" - - # Check to enable 64-bit flags for compiler/linker - if test "$do64bit" = yes; then - - if test "$GCC" = yes; then - - { echo "$as_me:$LINENO: WARNING: 64bit mode not supported with GCC on $system" >&5 -echo "$as_me: WARNING: 64bit mode not supported with GCC on $system" >&2;} - -else - - do64bit_ok=yes - CFLAGS="$CFLAGS -q64" - LDFLAGS_ARCH="-q64" - RANLIB="${RANLIB} -X64" - AR="${AR} -X64" - SHLIB_LD_FLAGS="-b64" - -fi - - -fi - - - if test "`uname -m`" = ia64; then - - # AIX-5 uses ELF style dynamic libraries on IA-64, but not PPC - SHLIB_LD="/usr/ccs/bin/ld -G -z text" - # AIX-5 has dl* in libc.so - DL_LIBS="" - if test "$GCC" = yes; then - - CC_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}' - -else - - CC_SEARCH_FLAGS='-R${LIB_RUNTIME_DIR}' - -fi - - LD_SEARCH_FLAGS='-R ${LIB_RUNTIME_DIR}' - -else - - if test "$GCC" = yes; then - - SHLIB_LD='${CC} -shared -Wl,-bexpall' - -else - - SHLIB_LD="/bin/ld -bhalt:4 -bM:SRE -bexpall -H512 -T512 -bnoentry" - LDFLAGS="$LDFLAGS -brtl" - -fi - - SHLIB_LD="${SHLIB_LD} ${SHLIB_LD_FLAGS}" - DL_LIBS="-ldl" - CC_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}' - LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} - -fi - - ;; - BeOS*) - SHLIB_CFLAGS="-fPIC" - SHLIB_LD='${CC} -nostart' - SHLIB_LD_LIBS='${LIBS}' - SHLIB_SUFFIX=".so" - DL_OBJS="tclLoadDl.o" - DL_LIBS="-ldl" - - #----------------------------------------------------------- - # Check for inet_ntoa in -lbind, for BeOS (which also needs - # -lsocket, even if the network functions are in -lnet which - # is always linked to, for compatibility. - #----------------------------------------------------------- - echo "$as_me:$LINENO: checking for inet_ntoa in -lbind" >&5 -echo $ECHO_N "checking for inet_ntoa in -lbind... $ECHO_C" >&6 -if test "${ac_cv_lib_bind_inet_ntoa+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lbind $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char inet_ntoa (); -int -main () -{ -inet_ntoa (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_bind_inet_ntoa=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_lib_bind_inet_ntoa=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_bind_inet_ntoa" >&5 -echo "${ECHO_T}$ac_cv_lib_bind_inet_ntoa" >&6 -if test $ac_cv_lib_bind_inet_ntoa = yes; then - LIBS="$LIBS -lbind -lsocket" -fi - - ;; - BSD/OS-4.*) - SHLIB_CFLAGS="-export-dynamic -fPIC" - SHLIB_LD='${CC} -shared' - SHLIB_LD_LIBS='${LIBS}' - SHLIB_SUFFIX=".so" - DL_OBJS="tclLoadDl.o" - DL_LIBS="-ldl" - LDFLAGS="$LDFLAGS -export-dynamic" - CC_SEARCH_FLAGS="" - LD_SEARCH_FLAGS="" - ;; - CYGWIN_*) - SHLIB_CFLAGS="" - SHLIB_LD='${CC} -shared' - SHLIB_LD_LIBS='${LIBS}' - SHLIB_SUFFIX=".dll" - EXE_SUFFIX=".exe" - DL_OBJS="tclLoadDl.o" - DL_LIBS="-ldl" - CC_SEARCH_FLAGS="" - LD_SEARCH_FLAGS="" - ;; - Haiku*) - LDFLAGS="$LDFLAGS -Wl,--export-dynamic" - SHLIB_CFLAGS="-fPIC" - SHLIB_LD_LIBS='${LIBS}' - SHLIB_SUFFIX=".so" - SHLIB_LD='${CC} -shared ${CFLAGS} ${LDFLAGS}' - DL_OBJS="tclLoadDl.o" - DL_LIBS="-lroot" - echo "$as_me:$LINENO: checking for inet_ntoa in -lnetwork" >&5 -echo $ECHO_N "checking for inet_ntoa in -lnetwork... $ECHO_C" >&6 -if test "${ac_cv_lib_network_inet_ntoa+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lnetwork $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char inet_ntoa (); -int -main () -{ -inet_ntoa (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_network_inet_ntoa=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_lib_network_inet_ntoa=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_network_inet_ntoa" >&5 -echo "${ECHO_T}$ac_cv_lib_network_inet_ntoa" >&6 -if test $ac_cv_lib_network_inet_ntoa = yes; then - LIBS="$LIBS -lnetwork" -fi - - ;; - HP-UX-*.11.*) - # Use updated header definitions where possible - -cat >>confdefs.h <<\_ACEOF -#define _XOPEN_SOURCE_EXTENDED 1 -_ACEOF - - # TEA specific: Needed by Tcl, but not most extensions - #AC_DEFINE(_XOPEN_SOURCE, 1, [Do we want to use the XOPEN network library?]) - #LIBS="$LIBS -lxnet" # Use the XOPEN network library - - if test "`uname -m`" = ia64; then - - SHLIB_SUFFIX=".so" - # Use newer C++ library for C++ extensions - #if test "$GCC" != "yes" ; then - # CPPFLAGS="-AA" - #fi - -else - - SHLIB_SUFFIX=".sl" - -fi - - echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5 -echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6 -if test "${ac_cv_lib_dld_shl_load+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldld $LIBS" -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char shl_load (); -int -main () -{ -shl_load (); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - ac_cv_lib_dld_shl_load=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -ac_cv_lib_dld_shl_load=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5 -echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6 -if test $ac_cv_lib_dld_shl_load = yes; then - tcl_ok=yes -else - tcl_ok=no -fi - - if test "$tcl_ok" = yes; then - - SHLIB_LD_LIBS='${LIBS}' - DL_OBJS="tclLoadShl.o" - DL_LIBS="-ldld" - LDFLAGS="$LDFLAGS -E" - CC_SEARCH_FLAGS='-Wl,+s,+b,${LIB_RUNTIME_DIR}:.' - LD_SEARCH_FLAGS='+s +b ${LIB_RUNTIME_DIR}:.' - LD_LIBRARY_PATH_VAR="SHLIB_PATH" - -fi - - if test "$GCC" = yes; then - - SHLIB_LD='${CC} -shared' - LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} - -else - - CFLAGS="$CFLAGS -z" - # Users may want PA-RISC 1.1/2.0 portable code - needs HP cc - #CFLAGS="$CFLAGS +DAportable" - SHLIB_CFLAGS="+z" - SHLIB_LD="ld -b" - -fi - - - # Check to enable 64-bit flags for compiler/linker - if test "$do64bit" = "yes"; then - - if test "$GCC" = yes; then - - case `${CC} -dumpmachine` in - hppa64*) - # 64-bit gcc in use. Fix flags for GNU ld. - do64bit_ok=yes - SHLIB_LD='${CC} -shared' - SHLIB_LD_LIBS='${LIBS}' - if test $doRpath = yes; then - - CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' -fi - - LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} - ;; - *) - { echo "$as_me:$LINENO: WARNING: 64bit mode not supported with GCC on $system" >&5 -echo "$as_me: WARNING: 64bit mode not supported with GCC on $system" >&2;} - ;; - esac - -else - - do64bit_ok=yes - CFLAGS="$CFLAGS +DD64" - LDFLAGS_ARCH="+DD64" - -fi - - -fi - ;; - IRIX-6.*) - SHLIB_CFLAGS="" - SHLIB_LD="ld -n32 -shared -rdata_shared" - SHLIB_LD_LIBS='${LIBS}' - SHLIB_SUFFIX=".so" - DL_OBJS="tclLoadDl.o" - DL_LIBS="" - if test $doRpath = yes; then - - CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' - LD_SEARCH_FLAGS='-rpath ${LIB_RUNTIME_DIR}' -fi - - if test "$GCC" = yes; then - - CFLAGS="$CFLAGS -mabi=n32" - LDFLAGS="$LDFLAGS -mabi=n32" - -else - - case $system in - IRIX-6.3) - # Use to build 6.2 compatible binaries on 6.3. - CFLAGS="$CFLAGS -n32 -D_OLD_TERMIOS" - ;; - *) - CFLAGS="$CFLAGS -n32" - ;; - esac - LDFLAGS="$LDFLAGS -n32" - -fi - - ;; - IRIX64-6.*) - SHLIB_CFLAGS="" - SHLIB_LD="ld -n32 -shared -rdata_shared" - SHLIB_LD_LIBS='${LIBS}' - SHLIB_SUFFIX=".so" - DL_OBJS="tclLoadDl.o" - DL_LIBS="" - if test $doRpath = yes; then - - CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' - LD_SEARCH_FLAGS='-rpath ${LIB_RUNTIME_DIR}' -fi - - - # Check to enable 64-bit flags for compiler/linker - - if test "$do64bit" = yes; then - - if test "$GCC" = yes; then - - { echo "$as_me:$LINENO: WARNING: 64bit mode not supported by gcc" >&5 -echo "$as_me: WARNING: 64bit mode not supported by gcc" >&2;} - -else - - do64bit_ok=yes - SHLIB_LD="ld -64 -shared -rdata_shared" - CFLAGS="$CFLAGS -64" - LDFLAGS_ARCH="-64" - -fi - - -fi - - ;; - Linux*) - SHLIB_CFLAGS="-fPIC" - SHLIB_LD_LIBS='${LIBS}' - SHLIB_SUFFIX=".so" - - # TEA specific: - CFLAGS_OPTIMIZE="-O2 -fomit-frame-pointer" - # egcs-2.91.66 on Redhat Linux 6.0 generates lots of warnings - # when you inline the string and math operations. Turn this off to - # get rid of the warnings. - #CFLAGS_OPTIMIZE="${CFLAGS_OPTIMIZE} -D__NO_STRING_INLINES -D__NO_MATH_INLINES" - - # TEA specific: use LDFLAGS_DEFAULT instead of LDFLAGS - SHLIB_LD='${CC} -shared ${CFLAGS} ${LDFLAGS_DEFAULT}' - DL_OBJS="tclLoadDl.o" - DL_LIBS="-ldl" - LDFLAGS="$LDFLAGS -Wl,--export-dynamic" - if test $doRpath = yes; then - - CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' -fi - - LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} - if test "`uname -m`" = "alpha"; then - CFLAGS="$CFLAGS -mieee" -fi - - if test $do64bit = yes; then - - echo "$as_me:$LINENO: checking if compiler accepts -m64 flag" >&5 -echo $ECHO_N "checking if compiler accepts -m64 flag... $ECHO_C" >&6 -if test "${tcl_cv_cc_m64+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - - hold_cflags=$CFLAGS - CFLAGS="$CFLAGS -m64" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - tcl_cv_cc_m64=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -tcl_cv_cc_m64=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - CFLAGS=$hold_cflags -fi -echo "$as_me:$LINENO: result: $tcl_cv_cc_m64" >&5 -echo "${ECHO_T}$tcl_cv_cc_m64" >&6 - if test $tcl_cv_cc_m64 = yes; then - - CFLAGS="$CFLAGS -m64" - do64bit_ok=yes - -fi - - -fi - - - # The combo of gcc + glibc has a bug related to inlining of - # functions like strtod(). The -fno-builtin flag should address - # this problem but it does not work. The -fno-inline flag is kind - # of overkill but it works. Disable inlining only when one of the - # files in compat/*.c is being linked in. - - if test x"${USE_COMPAT}" != x; then - CFLAGS="$CFLAGS -fno-inline" -fi - - - ;; - GNU*) - SHLIB_CFLAGS="-fPIC" - SHLIB_LD_LIBS='${LIBS}' - SHLIB_SUFFIX=".so" - - SHLIB_LD='${CC} -shared' - DL_OBJS="" - DL_LIBS="-ldl" - LDFLAGS="$LDFLAGS -Wl,--export-dynamic" - CC_SEARCH_FLAGS="" - LD_SEARCH_FLAGS="" - if test "`uname -m`" = "alpha"; then - CFLAGS="$CFLAGS -mieee" -fi - - ;; - Lynx*) - SHLIB_CFLAGS="-fPIC" - SHLIB_LD_LIBS='${LIBS}' - SHLIB_SUFFIX=".so" - CFLAGS_OPTIMIZE=-02 - SHLIB_LD='${CC} -shared' - DL_OBJS="tclLoadDl.o" - DL_LIBS="-mshared -ldl" - LD_FLAGS="-Wl,--export-dynamic" - if test $doRpath = yes; then - - CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' - LD_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' -fi - - ;; - OpenBSD-*) - SHLIB_CFLAGS="-fPIC" - SHLIB_LD='${CC} -shared ${SHLIB_CFLAGS}' - SHLIB_LD_LIBS='${LIBS}' - SHLIB_SUFFIX=".so" - DL_OBJS="tclLoadDl.o" - DL_LIBS="" - if test $doRpath = yes; then - - CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' -fi - - LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} - SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.so.${SHLIB_VERSION}' - echo "$as_me:$LINENO: checking for ELF" >&5 -echo $ECHO_N "checking for ELF... $ECHO_C" >&6 -if test "${tcl_cv_ld_elf+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -#ifdef __ELF__ - yes -#endif - -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "yes" >/dev/null 2>&1; then - tcl_cv_ld_elf=yes -else - tcl_cv_ld_elf=no -fi -rm -f conftest* - -fi -echo "$as_me:$LINENO: result: $tcl_cv_ld_elf" >&5 -echo "${ECHO_T}$tcl_cv_ld_elf" >&6 - if test $tcl_cv_ld_elf = yes; then - - LDFLAGS=-Wl,-export-dynamic - -else - LDFLAGS="" -fi - - if test "${TCL_THREADS}" = "1"; then - - # OpenBSD builds and links with -pthread, never -lpthread. - LIBS=`echo $LIBS | sed s/-lpthread//` - CFLAGS="$CFLAGS -pthread" - SHLIB_CFLAGS="$SHLIB_CFLAGS -pthread" - -fi - - # OpenBSD doesn't do version numbers with dots. - UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.a' - TCL_LIB_VERSIONS_OK=nodots - ;; - NetBSD-*|FreeBSD-[3-4].*) - # FreeBSD 3.* and greater have ELF. - # NetBSD 2.* has ELF and can use 'cc -shared' to build shared libs - SHLIB_CFLAGS="-fPIC" - SHLIB_LD='${CC} -shared ${SHLIB_CFLAGS}' - SHLIB_LD_LIBS='${LIBS}' - SHLIB_SUFFIX=".so" - DL_OBJS="tclLoadDl.o" - DL_LIBS="" - LDFLAGS="$LDFLAGS -export-dynamic" - if test $doRpath = yes; then - - CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' -fi - - LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} - if test "${TCL_THREADS}" = "1"; then - - # The -pthread needs to go in the CFLAGS, not LIBS - LIBS=`echo $LIBS | sed s/-pthread//` - CFLAGS="$CFLAGS -pthread" - LDFLAGS="$LDFLAGS -pthread" - -fi - - case $system in - FreeBSD-3.*) - # FreeBSD-3 doesn't handle version numbers with dots. - UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.a' - SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.so' - TCL_LIB_VERSIONS_OK=nodots - ;; - esac - ;; - FreeBSD-*) - # This configuration from FreeBSD Ports. - SHLIB_CFLAGS="-fPIC" - SHLIB_LD="${CC} -shared" - TCL_SHLIB_LD_EXTRAS="-soname \$@" - SHLIB_LD_LIBS='${LIBS}' - SHLIB_SUFFIX=".so" - DL_OBJS="tclLoadDl.o" - DL_LIBS="" - LDFLAGS="" - if test $doRpath = yes; then - - CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' - LD_SEARCH_FLAGS='-rpath ${LIB_RUNTIME_DIR}' -fi - - if test "${TCL_THREADS}" = "1"; then - - # The -pthread needs to go in the LDFLAGS, not LIBS - LIBS=`echo $LIBS | sed s/-pthread//` - CFLAGS="$CFLAGS $PTHREAD_CFLAGS" - LDFLAGS="$LDFLAGS $PTHREAD_LIBS" -fi - - # Version numbers are dot-stripped by system policy. - TCL_TRIM_DOTS=`echo ${VERSION} | tr -d .` - UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.a' - SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}\$\{DBGX\}.so.1' - TCL_LIB_VERSIONS_OK=nodots - ;; - Darwin-*) - CFLAGS_OPTIMIZE="-Os" - SHLIB_CFLAGS="-fno-common" - # To avoid discrepancies between what headers configure sees during - # preprocessing tests and compiling tests, move any -isysroot and - # -mmacosx-version-min flags from CFLAGS to CPPFLAGS: - CPPFLAGS="${CPPFLAGS} `echo " ${CFLAGS}" | \ - awk 'BEGIN {FS=" +-";ORS=" "}; {for (i=2;i<=NF;i++) \ - if ($i~/^(isysroot|mmacosx-version-min)/) print "-"$i}'`" - CFLAGS="`echo " ${CFLAGS}" | \ - awk 'BEGIN {FS=" +-";ORS=" "}; {for (i=2;i<=NF;i++) \ - if (!($i~/^(isysroot|mmacosx-version-min)/)) print "-"$i}'`" - if test $do64bit = yes; then - - case `arch` in - ppc) - echo "$as_me:$LINENO: checking if compiler accepts -arch ppc64 flag" >&5 -echo $ECHO_N "checking if compiler accepts -arch ppc64 flag... $ECHO_C" >&6 -if test "${tcl_cv_cc_arch_ppc64+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - - hold_cflags=$CFLAGS - CFLAGS="$CFLAGS -arch ppc64 -mpowerpc64 -mcpu=G5" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - tcl_cv_cc_arch_ppc64=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -tcl_cv_cc_arch_ppc64=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - CFLAGS=$hold_cflags -fi -echo "$as_me:$LINENO: result: $tcl_cv_cc_arch_ppc64" >&5 -echo "${ECHO_T}$tcl_cv_cc_arch_ppc64" >&6 - if test $tcl_cv_cc_arch_ppc64 = yes; then - - CFLAGS="$CFLAGS -arch ppc64 -mpowerpc64 -mcpu=G5" - do64bit_ok=yes - -fi -;; - i386) - echo "$as_me:$LINENO: checking if compiler accepts -arch x86_64 flag" >&5 -echo $ECHO_N "checking if compiler accepts -arch x86_64 flag... $ECHO_C" >&6 -if test "${tcl_cv_cc_arch_x86_64+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - - hold_cflags=$CFLAGS - CFLAGS="$CFLAGS -arch x86_64" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - tcl_cv_cc_arch_x86_64=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -tcl_cv_cc_arch_x86_64=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - CFLAGS=$hold_cflags -fi -echo "$as_me:$LINENO: result: $tcl_cv_cc_arch_x86_64" >&5 -echo "${ECHO_T}$tcl_cv_cc_arch_x86_64" >&6 - if test $tcl_cv_cc_arch_x86_64 = yes; then - - CFLAGS="$CFLAGS -arch x86_64" - do64bit_ok=yes - -fi -;; - *) - { echo "$as_me:$LINENO: WARNING: Don't know how enable 64-bit on architecture \`arch\`" >&5 -echo "$as_me: WARNING: Don't know how enable 64-bit on architecture \`arch\`" >&2;};; - esac - -else - - # Check for combined 32-bit and 64-bit fat build - if echo "$CFLAGS " |grep -E -q -- '-arch (ppc64|x86_64) ' \ - && echo "$CFLAGS " |grep -E -q -- '-arch (ppc|i386) '; then - - fat_32_64=yes -fi - - -fi - - # TEA specific: use LDFLAGS_DEFAULT instead of LDFLAGS - SHLIB_LD='${CC} -dynamiclib ${CFLAGS} ${LDFLAGS_DEFAULT}' - echo "$as_me:$LINENO: checking if ld accepts -single_module flag" >&5 -echo $ECHO_N "checking if ld accepts -single_module flag... $ECHO_C" >&6 -if test "${tcl_cv_ld_single_module+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - - hold_ldflags=$LDFLAGS - LDFLAGS="$LDFLAGS -dynamiclib -Wl,-single_module" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ -int i; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - tcl_cv_ld_single_module=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -tcl_cv_ld_single_module=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - LDFLAGS=$hold_ldflags -fi -echo "$as_me:$LINENO: result: $tcl_cv_ld_single_module" >&5 -echo "${ECHO_T}$tcl_cv_ld_single_module" >&6 - if test $tcl_cv_ld_single_module = yes; then - - SHLIB_LD="${SHLIB_LD} -Wl,-single_module" - -fi - - # TEA specific: link shlib with current and compatiblity version flags - vers=`echo ${PACKAGE_VERSION} | sed -e 's/^\([0-9]\{1,5\}\)\(\(\.[0-9]\{1,3\}\)\{0,2\}\).*$/\1\2/p' -e d` - SHLIB_LD="${SHLIB_LD} -current_version ${vers:-0} -compatibility_version ${vers:-0}" - SHLIB_LD_LIBS='${LIBS}' - SHLIB_SUFFIX=".dylib" - DL_OBJS="tclLoadDyld.o" - DL_LIBS="" - # Don't use -prebind when building for Mac OS X 10.4 or later only: - if test "`echo "${MACOSX_DEPLOYMENT_TARGET}" | awk -F '10\\.' '{print int($2)}'`" -lt 4 -a \ - "`echo "${CPPFLAGS}" | awk -F '-mmacosx-version-min=10\\.' '{print int($2)}'`" -lt 4; then - - LDFLAGS="$LDFLAGS -prebind" -fi - - LDFLAGS="$LDFLAGS -headerpad_max_install_names" - echo "$as_me:$LINENO: checking if ld accepts -search_paths_first flag" >&5 -echo $ECHO_N "checking if ld accepts -search_paths_first flag... $ECHO_C" >&6 -if test "${tcl_cv_ld_search_paths_first+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - - hold_ldflags=$LDFLAGS - LDFLAGS="$LDFLAGS -Wl,-search_paths_first" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ -int i; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - tcl_cv_ld_search_paths_first=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -tcl_cv_ld_search_paths_first=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - LDFLAGS=$hold_ldflags -fi -echo "$as_me:$LINENO: result: $tcl_cv_ld_search_paths_first" >&5 -echo "${ECHO_T}$tcl_cv_ld_search_paths_first" >&6 - if test $tcl_cv_ld_search_paths_first = yes; then - - LDFLAGS="$LDFLAGS -Wl,-search_paths_first" - -fi - - if test "$tcl_cv_cc_visibility_hidden" != yes; then - - -cat >>confdefs.h <<\_ACEOF -#define MODULE_SCOPE __private_extern__ -_ACEOF - - tcl_cv_cc_visibility_hidden=yes - -fi - - CC_SEARCH_FLAGS="" - LD_SEARCH_FLAGS="" - LD_LIBRARY_PATH_VAR="DYLD_LIBRARY_PATH" - # TEA specific: for combined 32 & 64 bit fat builds of Tk - # extensions, verify that 64-bit build is possible. - if test "$fat_32_64" = yes && test -n "${TK_BIN_DIR}"; then - - if test "${TEA_WINDOWINGSYSTEM}" = x11; then - - echo "$as_me:$LINENO: checking for 64-bit X11" >&5 -echo $ECHO_N "checking for 64-bit X11... $ECHO_C" >&6 -if test "${tcl_cv_lib_x11_64+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - - for v in CFLAGS CPPFLAGS LDFLAGS; do - eval 'hold_'$v'="$'$v'";'$v'="`echo "$'$v' "|sed -e "s/-arch ppc / /g" -e "s/-arch i386 / /g"`"' - done - CPPFLAGS="$CPPFLAGS -I/usr/X11R6/include" - LDFLAGS="$LDFLAGS -L/usr/X11R6/lib -lX11" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -int -main () -{ -XrmInitialize(); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - tcl_cv_lib_x11_64=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -tcl_cv_lib_x11_64=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - for v in CFLAGS CPPFLAGS LDFLAGS; do - eval $v'="$hold_'$v'"' - done -fi -echo "$as_me:$LINENO: result: $tcl_cv_lib_x11_64" >&5 -echo "${ECHO_T}$tcl_cv_lib_x11_64" >&6 - -fi - - if test "${TEA_WINDOWINGSYSTEM}" = aqua; then - - echo "$as_me:$LINENO: checking for 64-bit Tk" >&5 -echo $ECHO_N "checking for 64-bit Tk... $ECHO_C" >&6 -if test "${tcl_cv_lib_tk_64+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - - for v in CFLAGS CPPFLAGS LDFLAGS; do - eval 'hold_'$v'="$'$v'";'$v'="`echo "$'$v' "|sed -e "s/-arch ppc / /g" -e "s/-arch i386 / /g"`"' - done - CPPFLAGS="$CPPFLAGS -DUSE_TCL_STUBS=1 -DUSE_TK_STUBS=1 ${TCL_INCLUDES} ${TK_INCLUDES}" - LDFLAGS="$LDFLAGS ${TCL_STUB_LIB_SPEC} ${TK_STUB_LIB_SPEC}" - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -int -main () -{ -Tk_InitStubs(NULL, "", 0); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - tcl_cv_lib_tk_64=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -tcl_cv_lib_tk_64=no -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - for v in CFLAGS CPPFLAGS LDFLAGS; do - eval $v'="$hold_'$v'"' - done -fi -echo "$as_me:$LINENO: result: $tcl_cv_lib_tk_64" >&5 -echo "${ECHO_T}$tcl_cv_lib_tk_64" >&6 - -fi - - # remove 64-bit arch flags from CFLAGS et al. if configuration - # does not support 64-bit. - if test "$tcl_cv_lib_tk_64" = no -o "$tcl_cv_lib_x11_64" = no; then - - { echo "$as_me:$LINENO: Removing 64-bit architectures from compiler & linker flags" >&5 -echo "$as_me: Removing 64-bit architectures from compiler & linker flags" >&6;} - for v in CFLAGS CPPFLAGS LDFLAGS; do - eval $v'="`echo "$'$v' "|sed -e "s/-arch ppc64 / /g" -e "s/-arch x86_64 / /g"`"' - done -fi - - -fi - - ;; - OS/390-*) - CFLAGS_OPTIMIZE="" # Optimizer is buggy - -cat >>confdefs.h <<\_ACEOF -#define _OE_SOCKETS 1 -_ACEOF - - ;; - OSF1-V*) - # Digital OSF/1 - SHLIB_CFLAGS="" - if test "$SHARED_BUILD" = 1; then - - SHLIB_LD='ld -shared -expect_unresolved "*"' - -else - - SHLIB_LD='ld -non_shared -expect_unresolved "*"' - -fi - - SHLIB_LD_LIBS="" - SHLIB_SUFFIX=".so" - DL_OBJS="tclLoadDl.o" - DL_LIBS="" - if test $doRpath = yes; then - - CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' - LD_SEARCH_FLAGS='-rpath ${LIB_RUNTIME_DIR}' -fi - - if test "$GCC" = yes; then - CFLAGS="$CFLAGS -mieee" -else - - CFLAGS="$CFLAGS -DHAVE_TZSET -std1 -ieee" -fi - - # see pthread_intro(3) for pthread support on osf1, k.furukawa - if test "${TCL_THREADS}" = 1; then - - CFLAGS="$CFLAGS -DHAVE_PTHREAD_ATTR_SETSTACKSIZE" - CFLAGS="$CFLAGS -DTCL_THREAD_STACK_MIN=PTHREAD_STACK_MIN*64" - LIBS=`echo $LIBS | sed s/-lpthreads//` - if test "$GCC" = yes; then - - LIBS="$LIBS -lpthread -lmach -lexc" - -else - - CFLAGS="$CFLAGS -pthread" - LDFLAGS="$LDFLAGS -pthread" - -fi - - -fi - - ;; - QNX-6*) - # QNX RTP - # This may work for all QNX, but it was only reported for v6. - SHLIB_CFLAGS="-fPIC" - SHLIB_LD="ld -Bshareable -x" - SHLIB_LD_LIBS="" - SHLIB_SUFFIX=".so" - DL_OBJS="tclLoadDl.o" - # dlopen is in -lc on QNX - DL_LIBS="" - CC_SEARCH_FLAGS="" - LD_SEARCH_FLAGS="" - ;; - SunOS-5.[0-6]) - # Careful to not let 5.10+ fall into this case - - # Note: If _REENTRANT isn't defined, then Solaris - # won't define thread-safe library routines. - - -cat >>confdefs.h <<\_ACEOF -#define _REENTRANT 1 -_ACEOF - - -cat >>confdefs.h <<\_ACEOF -#define _POSIX_PTHREAD_SEMANTICS 1 -_ACEOF - - - SHLIB_CFLAGS="-KPIC" - - # Note: need the LIBS below, otherwise Tk won't find Tcl's - # symbols when dynamically loaded into tclsh. - - SHLIB_LD_LIBS='${LIBS}' - SHLIB_SUFFIX=".so" - DL_OBJS="tclLoadDl.o" - DL_LIBS="-ldl" - if test "$GCC" = yes; then - - SHLIB_LD='${CC} -shared' - CC_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}' - LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} - -else - - SHLIB_LD="/usr/ccs/bin/ld -G -z text" - CC_SEARCH_FLAGS='-R ${LIB_RUNTIME_DIR}' - LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} - -fi - - ;; - SunOS-5*) - # Note: If _REENTRANT isn't defined, then Solaris - # won't define thread-safe library routines. - - -cat >>confdefs.h <<\_ACEOF -#define _REENTRANT 1 -_ACEOF - - -cat >>confdefs.h <<\_ACEOF -#define _POSIX_PTHREAD_SEMANTICS 1 -_ACEOF - - - SHLIB_CFLAGS="-KPIC" - - # Check to enable 64-bit flags for compiler/linker - if test "$do64bit" = yes; then - - arch=`isainfo` - if test "$arch" = "sparcv9 sparc"; then - - if test "$GCC" = yes; then - - if test "`${CC} -dumpversion | awk -F. '{print $1}'`" -lt 3; then - - { echo "$as_me:$LINENO: WARNING: 64bit mode not supported with GCC < 3.2 on $system" >&5 -echo "$as_me: WARNING: 64bit mode not supported with GCC < 3.2 on $system" >&2;} - -else - - do64bit_ok=yes - CFLAGS="$CFLAGS -m64 -mcpu=v9" - LDFLAGS="$LDFLAGS -m64 -mcpu=v9" - SHLIB_CFLAGS="-fPIC" - -fi - - -else - - do64bit_ok=yes - if test "$do64bitVIS" = yes; then - - CFLAGS="$CFLAGS -xarch=v9a" - LDFLAGS_ARCH="-xarch=v9a" - -else - - CFLAGS="$CFLAGS -xarch=v9" - LDFLAGS_ARCH="-xarch=v9" - -fi - - # Solaris 64 uses this as well - #LD_LIBRARY_PATH_VAR="LD_LIBRARY_PATH_64" - -fi - - -else - if test "$arch" = "amd64 i386"; then - - if test "$GCC" = yes; then - - case $system in - SunOS-5.1[1-9]*|SunOS-5.[2-9][0-9]*) - do64bit_ok=yes - CFLAGS="$CFLAGS -m64" - LDFLAGS="$LDFLAGS -m64";; - *) - { echo "$as_me:$LINENO: WARNING: 64bit mode not supported with GCC on $system" >&5 -echo "$as_me: WARNING: 64bit mode not supported with GCC on $system" >&2;};; - esac - -else - - do64bit_ok=yes - case $system in - SunOS-5.1[1-9]*|SunOS-5.[2-9][0-9]*) - CFLAGS="$CFLAGS -m64" - LDFLAGS="$LDFLAGS -m64";; - *) - CFLAGS="$CFLAGS -xarch=amd64" - LDFLAGS="$LDFLAGS -xarch=amd64";; - esac - -fi - - -else - { echo "$as_me:$LINENO: WARNING: 64bit mode not supported for $arch" >&5 -echo "$as_me: WARNING: 64bit mode not supported for $arch" >&2;} -fi - -fi - - -fi - - - # Note: need the LIBS below, otherwise Tk won't find Tcl's - # symbols when dynamically loaded into tclsh. - - SHLIB_LD_LIBS='${LIBS}' - SHLIB_SUFFIX=".so" - DL_OBJS="tclLoadDl.o" - DL_LIBS="-ldl" - if test "$GCC" = yes; then - - SHLIB_LD='${CC} -shared' - CC_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}' - LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} - if test "$do64bit_ok" = yes; then - - if test "$arch" = "sparcv9 sparc"; then - - # We need to specify -static-libgcc or we need to - # add the path to the sparv9 libgcc. - # JH: static-libgcc is necessary for core Tcl, but may - # not be necessary for extensions. - SHLIB_LD="$SHLIB_LD -m64 -mcpu=v9 -static-libgcc" - # for finding sparcv9 libgcc, get the regular libgcc - # path, remove so name and append 'sparcv9' - #v9gcclibdir="`gcc -print-file-name=libgcc_s.so` | ..." - #CC_SEARCH_FLAGS="${CC_SEARCH_FLAGS},-R,$v9gcclibdir" - -else - if test "$arch" = "amd64 i386"; then - - # JH: static-libgcc is necessary for core Tcl, but may - # not be necessary for extensions. - SHLIB_LD="$SHLIB_LD -m64 -static-libgcc" - -fi - -fi - - -fi - - -else - - case $system in - SunOS-5.[1-9][0-9]*) - # TEA specific: use LDFLAGS_DEFAULT instead of LDFLAGS - SHLIB_LD='${CC} -G -z text ${LDFLAGS_DEFAULT}';; - *) - SHLIB_LD='/usr/ccs/bin/ld -G -z text';; - esac - CC_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}' - LD_SEARCH_FLAGS='-R ${LIB_RUNTIME_DIR}' - -fi - - ;; - esac - - if test "$do64bit" = yes -a "$do64bit_ok" = no; then - - { echo "$as_me:$LINENO: WARNING: 64bit support being disabled -- don't know magic for this platform" >&5 -echo "$as_me: WARNING: 64bit support being disabled -- don't know magic for this platform" >&2;} - -fi - - - - - # Step 4: disable dynamic loading if requested via a command-line switch. - - # Check whether --enable-load or --disable-load was given. -if test "${enable_load+set}" = set; then - enableval="$enable_load" - tcl_ok=$enableval -else - tcl_ok=yes -fi; - if test "$tcl_ok" = no; then - DL_OBJS="" -fi - - - if test "x$DL_OBJS" != x; then - BUILD_DLTEST="\$(DLTEST_TARGETS)" -else - - { echo "$as_me:$LINENO: WARNING: Can't figure out how to do dynamic loading or shared libraries on this system." >&5 -echo "$as_me: WARNING: Can't figure out how to do dynamic loading or shared libraries on this system." >&2;} - SHLIB_CFLAGS="" - SHLIB_LD="" - SHLIB_SUFFIX="" - DL_OBJS="tclLoadNone.o" - DL_LIBS="" - LDFLAGS="$LDFLAGS_ORIG" - CC_SEARCH_FLAGS="" - LD_SEARCH_FLAGS="" - BUILD_DLTEST="" - -fi - - LDFLAGS="$LDFLAGS $LDFLAGS_ARCH" - - # If we're running gcc, then change the C flags for compiling shared - # libraries to the right flags for gcc, instead of those for the - # standard manufacturer compiler. - - if test "$DL_OBJS" != "tclLoadNone.o" -a "$GCC" = yes; then - - case $system in - AIX-*) ;; - BSD/OS*) ;; - CYGWIN_*) ;; - IRIX*) ;; - NetBSD-*|FreeBSD-*|OpenBSD-*) ;; - Darwin-*) ;; - SCO_SV-3.2*) ;; - windows) ;; - *) SHLIB_CFLAGS="-fPIC" ;; - esac -fi - - - if test "$tcl_cv_cc_visibility_hidden" != yes; then - - -cat >>confdefs.h <<\_ACEOF -#define MODULE_SCOPE extern -_ACEOF - - cat >>confdefs.h <<\_ACEOF -#define NO_VIZ 1 -_ACEOF - - -fi - - - if test "$SHARED_LIB_SUFFIX" = ""; then - - # TEA specific: use PACKAGE_VERSION instead of VERSION - SHARED_LIB_SUFFIX='${PACKAGE_VERSION}${SHLIB_SUFFIX}' -fi - - if test "$UNSHARED_LIB_SUFFIX" = ""; then - - # TEA specific: use PACKAGE_VERSION instead of VERSION - UNSHARED_LIB_SUFFIX='${PACKAGE_VERSION}.a' -fi - - - - - - - - - - - - - - - - - # These must be called after we do the basic CFLAGS checks and - # verify any possible 64-bit or similar switches are necessary - - echo "$as_me:$LINENO: checking for required early compiler flags" >&5 -echo $ECHO_N "checking for required early compiler flags... $ECHO_C" >&6 - tcl_flags="" - - if test "${tcl_cv_flag__isoc99_source+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -int -main () -{ -char *p = (char *)strtoll; char *q = (char *)strtoull; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - tcl_cv_flag__isoc99_source=no -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#define _ISOC99_SOURCE 1 -#include -int -main () -{ -char *p = (char *)strtoll; char *q = (char *)strtoull; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - tcl_cv_flag__isoc99_source=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -tcl_cv_flag__isoc99_source=no -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -fi - - if test "x${tcl_cv_flag__isoc99_source}" = "xyes" ; then - -cat >>confdefs.h <<\_ACEOF -#define _ISOC99_SOURCE 1 -_ACEOF - - tcl_flags="$tcl_flags _ISOC99_SOURCE" - fi - - - if test "${tcl_cv_flag__largefile64_source+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -int -main () -{ -struct stat64 buf; int i = stat64("/", &buf); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - tcl_cv_flag__largefile64_source=no -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#define _LARGEFILE64_SOURCE 1 -#include -int -main () -{ -struct stat64 buf; int i = stat64("/", &buf); - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - tcl_cv_flag__largefile64_source=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -tcl_cv_flag__largefile64_source=no -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -fi - - if test "x${tcl_cv_flag__largefile64_source}" = "xyes" ; then - -cat >>confdefs.h <<\_ACEOF -#define _LARGEFILE64_SOURCE 1 -_ACEOF - - tcl_flags="$tcl_flags _LARGEFILE64_SOURCE" - fi - - - if test "${tcl_cv_flag__largefile_source64+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -int -main () -{ -char *p = (char *)open64; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - tcl_cv_flag__largefile_source64=no -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#define _LARGEFILE_SOURCE64 1 -#include -int -main () -{ -char *p = (char *)open64; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - tcl_cv_flag__largefile_source64=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -tcl_cv_flag__largefile_source64=no -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -fi - - if test "x${tcl_cv_flag__largefile_source64}" = "xyes" ; then - -cat >>confdefs.h <<\_ACEOF -#define _LARGEFILE_SOURCE64 1 -_ACEOF - - tcl_flags="$tcl_flags _LARGEFILE_SOURCE64" - fi - - if test "x${tcl_flags}" = "x" ; then - echo "$as_me:$LINENO: result: none" >&5 -echo "${ECHO_T}none" >&6 - else - echo "$as_me:$LINENO: result: ${tcl_flags}" >&5 -echo "${ECHO_T}${tcl_flags}" >&6 - fi - - - echo "$as_me:$LINENO: checking for 64-bit integer type" >&5 -echo $ECHO_N "checking for 64-bit integer type... $ECHO_C" >&6 - if test "${tcl_cv_type_64bit+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - - tcl_cv_type_64bit=none - # See if the compiler knows natively about __int64 - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ -__int64 value = (__int64) 0; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - tcl_type_64bit=__int64 -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -tcl_type_64bit="long long" -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext - # See if we should use long anyway Note that we substitute in the - # type that is our current guess for a 64-bit type inside this check - # program, so it should be modified only carefully... - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ - -int -main () -{ -switch (0) { - case 1: case (sizeof(${tcl_type_64bit})==sizeof(long)): ; - } - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - tcl_cv_type_64bit=${tcl_type_64bit} -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -fi - - if test "${tcl_cv_type_64bit}" = none ; then - -cat >>confdefs.h <<\_ACEOF -#define TCL_WIDE_INT_IS_LONG 1 -_ACEOF - - echo "$as_me:$LINENO: result: using long" >&5 -echo "${ECHO_T}using long" >&6 - elif test "${tcl_cv_type_64bit}" = "__int64" \ - -a "${TEA_PLATFORM}" = "windows" ; then - # TEA specific: We actually want to use the default tcl.h checks in - # this case to handle both TCL_WIDE_INT_TYPE and TCL_LL_MODIFIER* - echo "$as_me:$LINENO: result: using Tcl header defaults" >&5 -echo "${ECHO_T}using Tcl header defaults" >&6 - else - -cat >>confdefs.h <<_ACEOF -#define TCL_WIDE_INT_TYPE ${tcl_cv_type_64bit} -_ACEOF - - echo "$as_me:$LINENO: result: ${tcl_cv_type_64bit}" >&5 -echo "${ECHO_T}${tcl_cv_type_64bit}" >&6 - - # Now check for auxiliary declarations - echo "$as_me:$LINENO: checking for struct dirent64" >&5 -echo $ECHO_N "checking for struct dirent64... $ECHO_C" >&6 -if test "${tcl_cv_struct_dirent64+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -#include -int -main () -{ -struct dirent64 p; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - tcl_cv_struct_dirent64=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -tcl_cv_struct_dirent64=no -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $tcl_cv_struct_dirent64" >&5 -echo "${ECHO_T}$tcl_cv_struct_dirent64" >&6 - if test "x${tcl_cv_struct_dirent64}" = "xyes" ; then - -cat >>confdefs.h <<\_ACEOF -#define HAVE_STRUCT_DIRENT64 1 -_ACEOF - - fi - - echo "$as_me:$LINENO: checking for struct stat64" >&5 -echo $ECHO_N "checking for struct stat64... $ECHO_C" >&6 -if test "${tcl_cv_struct_stat64+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -int -main () -{ -struct stat64 p; - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - tcl_cv_struct_stat64=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -tcl_cv_struct_stat64=no -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: $tcl_cv_struct_stat64" >&5 -echo "${ECHO_T}$tcl_cv_struct_stat64" >&6 - if test "x${tcl_cv_struct_stat64}" = "xyes" ; then - -cat >>confdefs.h <<\_ACEOF -#define HAVE_STRUCT_STAT64 1 -_ACEOF - - fi - - - -for ac_func in open64 lseek64 -do -as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` -echo "$as_me:$LINENO: checking for $ac_func" >&5 -echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6 -if eval "test \"\${$as_ac_var+set}\" = set"; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -/* Define $ac_func to an innocuous variant, in case declares $ac_func. - For example, HP-UX 11i declares gettimeofday. */ -#define $ac_func innocuous_$ac_func - -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char $ac_func (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ - -#ifdef __STDC__ -# include -#else -# include -#endif - -#undef $ac_func - -/* Override any gcc2 internal prototype to avoid an error. */ -#ifdef __cplusplus -extern "C" -{ -#endif -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char $ac_func (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined (__stub_$ac_func) || defined (__stub___$ac_func) -choke me -#else -char (*f) () = $ac_func; -#endif -#ifdef __cplusplus -} -#endif - -int -main () -{ -return f != $ac_func; - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext conftest$ac_exeext -if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 - (eval $ac_link) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest$ac_exeext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - eval "$as_ac_var=yes" -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -eval "$as_ac_var=no" -fi -rm -f conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -fi -echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5 -echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6 -if test `eval echo '${'$as_ac_var'}'` = yes; then - cat >>confdefs.h <<_ACEOF -#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 -_ACEOF - -fi -done - - echo "$as_me:$LINENO: checking for off64_t" >&5 -echo $ECHO_N "checking for off64_t... $ECHO_C" >&6 - if test "${tcl_cv_type_off64_t+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - - cat >conftest.$ac_ext <<_ACEOF -/* confdefs.h. */ -_ACEOF -cat confdefs.h >>conftest.$ac_ext -cat >>conftest.$ac_ext <<_ACEOF -/* end confdefs.h. */ -#include -int -main () -{ -off64_t offset; - - ; - return 0; -} -_ACEOF -rm -f conftest.$ac_objext -if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 - (eval $ac_compile) 2>conftest.er1 - ac_status=$? - grep -v '^ *+' conftest.er1 >conftest.err - rm -f conftest.er1 - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } && - { ac_try='test -z "$ac_c_werror_flag" - || test ! -s conftest.err' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; } && - { ac_try='test -s conftest.$ac_objext' - { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 - (eval $ac_try) 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); }; }; then - tcl_cv_type_off64_t=yes -else - echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -tcl_cv_type_off64_t=no -fi -rm -f conftest.err conftest.$ac_objext conftest.$ac_ext -fi - - if test "x${tcl_cv_type_off64_t}" = "xyes" && \ - test "x${ac_cv_func_lseek64}" = "xyes" && \ - test "x${ac_cv_func_open64}" = "xyes" ; then - -cat >>confdefs.h <<\_ACEOF -#define HAVE_TYPE_OFF64_T 1 -_ACEOF - - echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 - else - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 - fi - fi - - - -#-------------------------------------------------------------------- -# Set the default compiler switches based on the --enable-symbols option. -#-------------------------------------------------------------------- - - - - echo "$as_me:$LINENO: checking for build with symbols" >&5 -echo $ECHO_N "checking for build with symbols... $ECHO_C" >&6 - # Check whether --enable-symbols or --disable-symbols was given. -if test "${enable_symbols+set}" = set; then - enableval="$enable_symbols" - tcl_ok=$enableval -else - tcl_ok=no -fi; - DBGX="" - if test "$tcl_ok" = "no"; then - CFLAGS_DEFAULT="${CFLAGS_OPTIMIZE}" - LDFLAGS_DEFAULT="${LDFLAGS_OPTIMIZE}" - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 - else - CFLAGS_DEFAULT="${CFLAGS_DEBUG}" - LDFLAGS_DEFAULT="${LDFLAGS_DEBUG}" - if test "$tcl_ok" = "yes"; then - echo "$as_me:$LINENO: result: yes (standard debugging)" >&5 -echo "${ECHO_T}yes (standard debugging)" >&6 - fi - fi - # TEA specific: - if test "${TEA_PLATFORM}" != "windows" ; then - LDFLAGS_DEFAULT="${LDFLAGS}" - fi - - - - - if test "$tcl_ok" = "mem" -o "$tcl_ok" = "all"; then - -cat >>confdefs.h <<\_ACEOF -#define TCL_MEM_DEBUG 1 -_ACEOF - - fi - - if test "$tcl_ok" != "yes" -a "$tcl_ok" != "no"; then - if test "$tcl_ok" = "all"; then - echo "$as_me:$LINENO: result: enabled symbols mem debugging" >&5 -echo "${ECHO_T}enabled symbols mem debugging" >&6 - else - echo "$as_me:$LINENO: result: enabled $tcl_ok debugging" >&5 -echo "${ECHO_T}enabled $tcl_ok debugging" >&6 - fi - fi - - -#-------------------------------------------------------------------- -# Everyone should be linking against the Tcl stub library. If you -# can't for some reason, remove this definition. If you aren't using -# stubs, you also need to modify the SHLIB_LD_LIBS setting below to -# link against the non-stubbed Tcl library. Add Tk too if necessary. -#-------------------------------------------------------------------- - -cat >>confdefs.h <<\_ACEOF -#define USE_TCL_STUBS 1 -_ACEOF - - -#-------------------------------------------------------------------- -# If the variable OPENSSL is set, we will build with the OpenSSL -# libraries. If it is not set, then we will use RSA BSAFE SSL-C -# libraries instead of the default OpenSSL libaries. -#-------------------------------------------------------------------- - -OPENSSL="1" - - - - #-------------------------------------------------------------------- - # If the variable OPENSSL is set, we will build with the OpenSSL - # libraries. If it is not set, then we will use RSA BSAFE SSL-C - # libraries instead of the default OpenSSL libaries. - #-------------------------------------------------------------------- - - # Check whether --enable-bsafe or --disable-bsafe was given. -if test "${enable_bsafe+set}" = set; then - enableval="$enable_bsafe" - OPENSSL="" -else - OPENSSL="1" -fi; - - #-------------------------------------------------------------------- - # Establish the location of the root directory for OpenSSL. - # If we're not using OpenSSL, set the root for BSAFE SSL-C. - # If we're using BSAFE, define the BSAFE compiler flag. - # The "FLAT_INC" flag is used in the BSAFE ssl.h header file and - # doesn't seem to be referenced anywhere else. - #-------------------------------------------------------------------- - if test -n "${OPENSSL}"; then - SSL_DIR='/usr /usr/local' - cat >>confdefs.h <<\_ACEOF -#define NO_IDEA 1 -_ACEOF - - cat >>confdefs.h <<\_ACEOF -#define NO_RC5 1 -_ACEOF - - else - SSL_DIR='/usr/sslc /usr/local/sslc' - cat >>confdefs.h <<\_ACEOF -#define BSAFE 1 -_ACEOF - - cat >>confdefs.h <<\_ACEOF -#define FLAT_INC 1 -_ACEOF - - fi - - echo "$as_me:$LINENO: checking for SSL directory" >&5 -echo $ECHO_N "checking for SSL directory... $ECHO_C" >&6 - - -# Check whether --with-ssl-dir or --without-ssl-dir was given. -if test "${with_ssl_dir+set}" = set; then - withval="$with_ssl_dir" - with_ssldir=${withval} -fi; - - if test "${ac_cv_c_ssldir+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - - # Use the value from --with-ssl-dir, if it was given - if test x"${with_ssldir}" != x ; then - if test -d "${with_ssldir}" ; then - ac_cv_c_ssldir=${with_ssldir} - else - { { echo "$as_me:$LINENO: error: ${with_ssldir} is not a valid directory" >&5 -echo "$as_me: error: ${with_ssldir} is not a valid directory" >&2;} - { (exit 1); exit 1; }; } - fi - else - list="`ls -d ${SSL_DIR} 2>/dev/null`" - for i in $list ; do - if test -d "$i" ; then - ac_cv_c_ssldir=$i - break - fi - done - fi - -fi - - - # Print a message based on how we determined the include path - - if test x"${ac_cv_c_ssldir}" = x ; then - { { echo "$as_me:$LINENO: error: Could not find SSL directory. -Please specify its location with --with-ssl-dir" >&5 -echo "$as_me: error: Could not find SSL directory. -Please specify its location with --with-ssl-dir" >&2;} - { (exit 1); exit 1; }; } - else - SSL_DIR=${ac_cv_c_ssldir} - echo "$as_me:$LINENO: result: ${SSL_DIR}" >&5 -echo "${ECHO_T}${SSL_DIR}" >&6 - fi - - - #-------------------------------------------------------------------- - # The OpenSSL and BSAFE SSL-C directory structures differ. - #-------------------------------------------------------------------- - - if test -n "${OPENSSL}"; then - SSL_LIB_DIR=${SSL_DIR}/lib - SSL_INCLUDE_DIR=${SSL_DIR}/include - if test ! -f "${SSL_INCLUDE_DIR}/openssl/opensslv.h"; then - { { echo "$as_me:$LINENO: error: bad ssl-dir: cannot find openssl/opensslv.h under ${SSL_INCLUDE_DIR}" >&5 -echo "$as_me: error: bad ssl-dir: cannot find openssl/opensslv.h under ${SSL_INCLUDE_DIR}" >&2;} - { (exit 1); exit 1; }; } - fi - else - #-------------------------------------------------------------------- - # If we're using RSA BSAFE SSL-C, we need to establish what platform - # we're running on before we can figure out some paths. - # This step isn't necessary if we're using OpenSSL. - #-------------------------------------------------------------------- - - if test -z "${OPENSSL}"; then - echo "$as_me:$LINENO: checking host type" >&5 -echo $ECHO_N "checking host type... $ECHO_C" >&6 - case "`uname -s`" in - *win32* | *WIN32* | *CYGWIN_NT*|*CYGWIN_98*|*CYGWIN_95*) - PLATFORM=WIN32 - ;; - *SunOS*) - PLATFORM=SOLARIS - ;; - HP-UX) - PLATFORM=HPUX - ;; - *) - PLATFORM=LINUX - ;; - esac - echo "$as_me:$LINENO: result: ${PLATFORM}" >&5 -echo "${ECHO_T}${PLATFORM}" >&6 - fi - SSL_LIB_DIR=${SSL_DIR}/${PLATFORM}/library/lib - SSL_INCLUDE_DIR=${SSL_DIR}/${PLATFORM}/library/include - if test ! -f "${SSL_INCLUDE_DIR}/crypto.h"; then - { { echo "$as_me:$LINENO: error: bad ssl-dir: cannot find crypto.h under ${SSL_INCLUDE_DIR}" >&5 -echo "$as_me: error: bad ssl-dir: cannot find crypto.h under ${SSL_INCLUDE_DIR}" >&2;} - { (exit 1); exit 1; }; } - fi - fi - - - - - - SSL_INCLUDE_DIR_NATIVE=\"`${CYGPATH} ${SSL_INCLUDE_DIR}`\" - SSL_LIB_DIR_NATIVE=\"`${CYGPATH} ${SSL_LIB_DIR}`\" - - - - #-------------------------------------------------------------------- - # If OpenSSL was built with gcc then there may be some symbols that need - # resolving before we can load it into tclsh (__udivd3i on solaris. - # Let the user specify if we need to add libgcc to the link line to - # resolve these symbols. - # - # This doesn't seem to be necessary if the RSA BSAFE SSL-C libraries - # are used instead of OpenSSL. - #-------------------------------------------------------------------- - - if test -n "${OPENSSL}"; then - echo "$as_me:$LINENO: checking if libgcc is needed to resolve openssl symbols" >&5 -echo $ECHO_N "checking if libgcc is needed to resolve openssl symbols... $ECHO_C" >&6 - - -# Check whether --with-gcclib or --without-gcclib was given. -if test "${with_gcclib+set}" = set; then - withval="$with_gcclib" - GCCLIB="-lgcc" -else - GCCLIB="" -fi; - - if test "x${GCCLIB}" = "x" ; then - echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6 - else - echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6 - echo "$as_me:$LINENO: checking for gcc library location" >&5 -echo $ECHO_N "checking for gcc library location... $ECHO_C" >&6 - GCCPATH=`${CC} -print-libgcc-file-name | sed -e 's#[^/]*0#'` - GCCPATH="-L${GCCPATH}" - echo "$as_me:$LINENO: result: ${GCCPATH}" >&5 -echo "${ECHO_T}${GCCPATH}" >&6 - fi - fi - - - -#-------------------------------------------------------------------- -# Determine if we should use the patented encryption code -#-------------------------------------------------------------------- - -# Check whether --enable-patents or --disable-patents was given. -if test "${enable_patents+set}" = set; then - enableval="$enable_patents" - PATENTS=${enableval} -else - PATENTS=yes -fi; - -if test ${PATENTS} = no; then - cat >>confdefs.h <<\_ACEOF -#define NO_PATENTS 1 -_ACEOF - -fi - -#-------------------------------------------------------------------- -# This macro generates a line to use when building a library. It -# depends on values set by the TEA_ENABLE_SHARED, TEA_ENABLE_SYMBOLS, -# and TEA_LOAD_TCLCONFIG macros above. -#-------------------------------------------------------------------- - - - if test "${TEA_PLATFORM}" = "windows" -a "$GCC" != "yes"; then - MAKE_STATIC_LIB="\${STLIB_LD} -out:\$@ \$(PKG_OBJECTS)" - MAKE_SHARED_LIB="\${SHLIB_LD} \${SHLIB_LD_LIBS} \${LDFLAGS_DEFAULT} -out:\$@ \$(PKG_OBJECTS)" - MAKE_STUB_LIB="\${STLIB_LD} -out:\$@ \$(PKG_STUB_OBJECTS)" - else - MAKE_STATIC_LIB="\${STLIB_LD} \$@ \$(PKG_OBJECTS)" - MAKE_SHARED_LIB="\${SHLIB_LD} -o \$@ \$(PKG_OBJECTS) \${SHLIB_LD_LIBS}" - MAKE_STUB_LIB="\${STLIB_LD} \$@ \$(PKG_STUB_OBJECTS)" - fi - - if test "${SHARED_BUILD}" = "1" ; then - MAKE_LIB="${MAKE_SHARED_LIB} " - else - MAKE_LIB="${MAKE_STATIC_LIB} " - fi - - #-------------------------------------------------------------------- - # Shared libraries and static libraries have different names. - # Use the double eval to make sure any variables in the suffix is - # substituted. (@@@ Might not be necessary anymore) - #-------------------------------------------------------------------- - - if test "${TEA_PLATFORM}" = "windows" ; then - if test "${SHARED_BUILD}" = "1" ; then - # We force the unresolved linking of symbols that are really in - # the private libraries of Tcl and Tk. - SHLIB_LD_LIBS="${SHLIB_LD_LIBS} \"`${CYGPATH} ${TCL_BIN_DIR}/${TCL_STUB_LIB_FILE}`\"" - if test x"${TK_BIN_DIR}" != x ; then - SHLIB_LD_LIBS="${SHLIB_LD_LIBS} \"`${CYGPATH} ${TK_BIN_DIR}/${TK_STUB_LIB_FILE}`\"" - fi - eval eval "PKG_LIB_FILE=${PACKAGE_NAME}${SHARED_LIB_SUFFIX}" - else - eval eval "PKG_LIB_FILE=${PACKAGE_NAME}${UNSHARED_LIB_SUFFIX}" - fi - # Some packages build their own stubs libraries - eval eval "PKG_STUB_LIB_FILE=${PACKAGE_NAME}stub${UNSHARED_LIB_SUFFIX}" - if test "$GCC" = "yes"; then - PKG_STUB_LIB_FILE=lib${PKG_STUB_LIB_FILE} - fi - # These aren't needed on Windows (either MSVC or gcc) - RANLIB=: - RANLIB_STUB=: - else - RANLIB_STUB="${RANLIB}" - if test "${SHARED_BUILD}" = "1" ; then - SHLIB_LD_LIBS="${SHLIB_LD_LIBS} ${TCL_STUB_LIB_SPEC}" - if test x"${TK_BIN_DIR}" != x ; then - SHLIB_LD_LIBS="${SHLIB_LD_LIBS} ${TK_STUB_LIB_SPEC}" - fi - eval eval "PKG_LIB_FILE=lib${PACKAGE_NAME}${SHARED_LIB_SUFFIX}" - RANLIB=: - else - eval eval "PKG_LIB_FILE=lib${PACKAGE_NAME}${UNSHARED_LIB_SUFFIX}" - fi - # Some packages build their own stubs libraries - eval eval "PKG_STUB_LIB_FILE=lib${PACKAGE_NAME}stub${UNSHARED_LIB_SUFFIX}" - fi - - # These are escaped so that only CFLAGS is picked up at configure time. - # The other values will be substituted at make time. - CFLAGS="${CFLAGS} \${CFLAGS_DEFAULT} \${CFLAGS_WARNING}" - if test "${SHARED_BUILD}" = "1" ; then - CFLAGS="${CFLAGS} \${SHLIB_CFLAGS}" - fi - - - - - - - - -#-------------------------------------------------------------------- -# Shared libraries and static libraries have different names. -# Also, windows libraries and unix libraries have different names. -# For the OpenSSL version, I chose to use the same library names that -# OpenSSL uses as its default names. -#-------------------------------------------------------------------- - -if test "${TEA_PLATFORM}" = "windows" ; then - if test "$GCC" = "yes"; then - - vars="-L${SSL_LIB_DIR_NATIVE}" - for i in $vars; do - if test "${TEA_PLATFORM}" = "windows" -a "$GCC" = "yes" ; then - # Convert foo.lib to -lfoo for GCC. No-op if not *.lib - i=`echo "$i" | sed -e 's/^\([^-].*\)\.lib$/-l\1/i'` - fi - PKG_LIBS="$PKG_LIBS $i" - done - - - else - - vars="-libpath:${SSL_LIB_DIR_NATIVE}" - for i in $vars; do - if test "${TEA_PLATFORM}" = "windows" -a "$GCC" = "yes" ; then - # Convert foo.lib to -lfoo for GCC. No-op if not *.lib - i=`echo "$i" | sed -e 's/^\([^-].*\)\.lib$/-l\1/i'` - fi - PKG_LIBS="$PKG_LIBS $i" - done - - - fi - if test -n "${OPENSSL}"; then - - vars="ssl.lib crypto.lib" - for i in $vars; do - if test "${TEA_PLATFORM}" = "windows" -a "$GCC" = "yes" ; then - # Convert foo.lib to -lfoo for GCC. No-op if not *.lib - i=`echo "$i" | sed -e 's/^\([^-].*\)\.lib$/-l\1/i'` - fi - PKG_LIBS="$PKG_LIBS $i" - done - - - else - - vars="sslc32.lib" - for i in $vars; do - if test "${TEA_PLATFORM}" = "windows" -a "$GCC" = "yes" ; then - # Convert foo.lib to -lfoo for GCC. No-op if not *.lib - i=`echo "$i" | sed -e 's/^\([^-].*\)\.lib$/-l\1/i'` - fi - PKG_LIBS="$PKG_LIBS $i" - done - - - fi -else - # Subst runtime dir here, use -R and -L where necessary. [Bug 1742859] - LIB_RUNTIME_DIR=${SSL_LIB_DIR} - eval "LD_SEARCH_FLAGS=\"${LD_SEARCH_FLAGS}\"" - if test -n "${OPENSSL}"; then - - vars="${LD_SEARCH_FLAGS} -L${SSL_LIB_DIR} -lssl -lcrypto ${GCCPATH} ${GCCLIB}" - for i in $vars; do - if test "${TEA_PLATFORM}" = "windows" -a "$GCC" = "yes" ; then - # Convert foo.lib to -lfoo for GCC. No-op if not *.lib - i=`echo "$i" | sed -e 's/^\([^-].*\)\.lib$/-l\1/i'` - fi - PKG_LIBS="$PKG_LIBS $i" - done - - - else - - vars="${LD_SEARCH_FLAGS} -L${SSL_LIB_DIR} -lsslc" - for i in $vars; do - if test "${TEA_PLATFORM}" = "windows" -a "$GCC" = "yes" ; then - # Convert foo.lib to -lfoo for GCC. No-op if not *.lib - i=`echo "$i" | sed -e 's/^\([^-].*\)\.lib$/-l\1/i'` - fi - PKG_LIBS="$PKG_LIBS $i" - done - - - fi -fi - -#-------------------------------------------------------------------- -# Find tclsh so that we can run pkg_mkIndex to generate the pkgIndex.tcl -# file during the install process. Don't run the TCLSH_PROG through -# ${CYGPATH} because it's being used directly by make. -# Require that we use a tclsh shell version 8.2 or later since earlier -# versions have bugs in the pkg_mkIndex routine. -# Add WISH as well if this is a Tk extension. -#-------------------------------------------------------------------- - - - echo "$as_me:$LINENO: checking for tclsh" >&5 -echo $ECHO_N "checking for tclsh... $ECHO_C" >&6 - if test -f "${TCL_BIN_DIR}/Makefile" ; then - # tclConfig.sh is in Tcl build directory - if test "${TEA_PLATFORM}" = "windows"; then - TCLSH_PROG="${TCL_BIN_DIR}/tclsh${TCL_MAJOR_VERSION}${TCL_MINOR_VERSION}${TCL_DBGX}${EXEEXT}" - else - TCLSH_PROG="${TCL_BIN_DIR}/tclsh" - fi - else - # tclConfig.sh is in install location - if test "${TEA_PLATFORM}" = "windows"; then - TCLSH_PROG="tclsh${TCL_MAJOR_VERSION}${TCL_MINOR_VERSION}${TCL_DBGX}${EXEEXT}" - else - TCLSH_PROG="tclsh${TCL_MAJOR_VERSION}.${TCL_MINOR_VERSION}${TCL_DBGX}" - fi - list="`ls -d ${TCL_BIN_DIR}/../bin 2>/dev/null` \ - `ls -d ${TCL_BIN_DIR}/.. 2>/dev/null` \ - `ls -d ${TCL_PREFIX}/bin 2>/dev/null`" - for i in $list ; do - if test -f "$i/${TCLSH_PROG}" ; then - REAL_TCL_BIN_DIR="`cd "$i"; pwd`/" - break - fi - done - TCLSH_PROG="${REAL_TCL_BIN_DIR}${TCLSH_PROG}" - fi - echo "$as_me:$LINENO: result: ${TCLSH_PROG}" >&5 -echo "${ECHO_T}${TCLSH_PROG}" >&6 - - - -#-------------------------------------------------------------------- -# Finally, substitute all of the various values into the Makefile. -#-------------------------------------------------------------------- - - ac_config_files="$ac_config_files Makefile" -cat >confcache <<\_ACEOF -# This file is a shell script that caches the results of configure -# tests run on this system so they can be shared between configure -# scripts and configure runs, see configure's option --config-cache. -# It is not useful on other systems. If it contains results you don't -# want to keep, you may remove or edit it. -# -# config.status only pays attention to the cache file if you give it -# the --recheck option to rerun configure. -# -# `ac_cv_env_foo' variables (set or unset) will be overridden when -# loading this file, other *unset* `ac_cv_foo' will be assigned the -# following values. - -_ACEOF - -# The following way of writing the cache mishandles newlines in values, -# but we know of no workaround that is simple, portable, and efficient. -# So, don't put newlines in cache variables' values. -# Ultrix sh set writes to stderr and can't be redirected directly, -# and sets the high bit in the cache file unless we assign to the vars. -{ - (set) 2>&1 | - case `(ac_space=' '; set | grep ac_space) 2>&1` in - *ac_space=\ *) - # `set' does not quote correctly, so add quotes (double-quote - # substitution turns \\\\ into \\, and sed turns \\ into \). - sed -n \ - "s/'/'\\\\''/g; - s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" - ;; - *) - # `set' quotes correctly as required by POSIX, so do not add quotes. - sed -n \ - "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" - ;; - esac; -} | - sed ' - t clear - : clear - s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ - t end - /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ - : end' >>confcache -if diff $cache_file confcache >/dev/null 2>&1; then :; else - if test -w $cache_file; then - test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file" - cat confcache >$cache_file - else - echo "not updating unwritable cache $cache_file" - fi -fi -rm -f confcache - -test "x$prefix" = xNONE && prefix=$ac_default_prefix -# Let make expand exec_prefix. -test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' - -# VPATH may cause trouble with some makes, so we remove $(srcdir), -# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and -# trailing colons and then remove the whole line if VPATH becomes empty -# (actually we leave an empty line to preserve line numbers). -if test "x$srcdir" = x.; then - ac_vpsub='/^[ ]*VPATH[ ]*=/{ -s/:*\$(srcdir):*/:/; -s/:*\${srcdir}:*/:/; -s/:*@srcdir@:*/:/; -s/^\([^=]*=[ ]*\):*/\1/; -s/:*$//; -s/^[^=]*=[ ]*$//; -}' -fi - -# Transform confdefs.h into DEFS. -# Protect against shell expansion while executing Makefile rules. -# Protect against Makefile macro expansion. -# -# If the first sed substitution is executed (which looks for macros that -# take arguments), then we branch to the quote section. Otherwise, -# look for a macro that doesn't take arguments. -cat >confdef2opt.sed <<\_ACEOF -t clear -: clear -s,^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\),-D\1=\2,g -t quote -s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\),-D\1=\2,g -t quote -d -: quote -s,[ `~#$^&*(){}\\|;'"<>?],\\&,g -s,\[,\\&,g -s,\],\\&,g -s,\$,$$,g -p -_ACEOF -# We use echo to avoid assuming a particular line-breaking character. -# The extra dot is to prevent the shell from consuming trailing -# line-breaks from the sub-command output. A line-break within -# single-quotes doesn't work because, if this script is created in a -# platform that uses two characters for line-breaks (e.g., DOS), tr -# would break. -ac_LF_and_DOT=`echo; echo .` -DEFS=`sed -n -f confdef2opt.sed confdefs.h | tr "$ac_LF_and_DOT" ' .'` -rm -f confdef2opt.sed - - -ac_libobjs= -ac_ltlibobjs= -for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue - # 1. Remove the extension, and $U if already installed. - ac_i=`echo "$ac_i" | - sed 's/\$U\././;s/\.o$//;s/\.obj$//'` - # 2. Add them. - ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext" - ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo' -done -LIBOBJS=$ac_libobjs - -LTLIBOBJS=$ac_ltlibobjs - - -CFLAGS="${CFLAGS} ${CPPFLAGS}"; CPPFLAGS="" - -: ${CONFIG_STATUS=./config.status} -ac_clean_files_save=$ac_clean_files -ac_clean_files="$ac_clean_files $CONFIG_STATUS" -{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5 -echo "$as_me: creating $CONFIG_STATUS" >&6;} -cat >$CONFIG_STATUS <<_ACEOF -#! $SHELL -# Generated by $as_me. -# Run this file to recreate the current configuration. -# Compiler output produced by configure, useful for debugging -# configure, is in config.log if it exists. - -debug=false -ac_cs_recheck=false -ac_cs_silent=false -SHELL=\${CONFIG_SHELL-$SHELL} -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF -## --------------------- ## -## M4sh Initialization. ## -## --------------------- ## - -# Be Bourne compatible -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then - emulate sh - NULLCMD=: - # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' -elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then - set -o posix -fi -DUALCASE=1; export DUALCASE # for MKS sh - -# Support unset when possible. -if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then - as_unset=unset -else - as_unset=false -fi - - -# Work around bugs in pre-3.0 UWIN ksh. -$as_unset ENV MAIL MAILPATH -PS1='$ ' -PS2='> ' -PS4='+ ' - -# NLS nuisances. -for as_var in \ - LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ - LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ - LC_TELEPHONE LC_TIME -do - if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then - eval $as_var=C; export $as_var - else - $as_unset $as_var - fi -done - -# Required to use basename. -if expr a : '\(a\)' >/dev/null 2>&1; then - as_expr=expr -else - as_expr=false -fi - -if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then - as_basename=basename -else - as_basename=false -fi - - -# Name of the executable. -as_me=`$as_basename "$0" || -$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ - X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)$' \| \ - . : '\(.\)' 2>/dev/null || -echo X/"$0" | - sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } - /^X\/\(\/\/\)$/{ s//\1/; q; } - /^X\/\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` - - -# PATH needs CR, and LINENO needs CR and PATH. -# Avoid depending upon Character Ranges. -as_cr_letters='abcdefghijklmnopqrstuvwxyz' -as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -as_cr_Letters=$as_cr_letters$as_cr_LETTERS -as_cr_digits='0123456789' -as_cr_alnum=$as_cr_Letters$as_cr_digits - -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - echo "#! /bin/sh" >conf$$.sh - echo "exit 0" >>conf$$.sh - chmod +x conf$$.sh - if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then - PATH_SEPARATOR=';' - else - PATH_SEPARATOR=: - fi - rm -f conf$$.sh -fi - - - as_lineno_1=$LINENO - as_lineno_2=$LINENO - as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` - test "x$as_lineno_1" != "x$as_lineno_2" && - test "x$as_lineno_3" = "x$as_lineno_2" || { - # Find who we are. Look in the path if we contain no path at all - # relative or not. - case $0 in - *[\\/]* ) as_myself=$0 ;; - *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break -done - - ;; - esac - # We did not find ourselves, most probably we were run as `sh COMMAND' - # in which case we are not to be found in the path. - if test "x$as_myself" = x; then - as_myself=$0 - fi - if test ! -f "$as_myself"; then - { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5 -echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;} - { (exit 1); exit 1; }; } - fi - case $CONFIG_SHELL in - '') - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for as_base in sh bash ksh sh5; do - case $as_dir in - /*) - if ("$as_dir/$as_base" -c ' - as_lineno_1=$LINENO - as_lineno_2=$LINENO - as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` - test "x$as_lineno_1" != "x$as_lineno_2" && - test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then - $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } - $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } - CONFIG_SHELL=$as_dir/$as_base - export CONFIG_SHELL - exec "$CONFIG_SHELL" "$0" ${1+"$@"} - fi;; - esac - done -done -;; - esac - - # Create $as_me.lineno as a copy of $as_myself, but with $LINENO - # uniformly replaced by the line number. The first 'sed' inserts a - # line-number line before each line; the second 'sed' does the real - # work. The second script uses 'N' to pair each line-number line - # with the numbered line, and appends trailing '-' during - # substitution so that $LINENO is not a special case at line end. - # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the - # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) - sed '=' <$as_myself | - sed ' - N - s,$,-, - : loop - s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3, - t loop - s,-$,, - s,^['$as_cr_digits']*\n,, - ' >$as_me.lineno && - chmod +x $as_me.lineno || - { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5 -echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;} - { (exit 1); exit 1; }; } - - # Don't try to exec as it changes $[0], causing all sort of problems - # (the dirname of $[0] is not the place where we might find the - # original and so on. Autoconf is especially sensible to this). - . ./$as_me.lineno - # Exit status is that of the last command. - exit -} - - -case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in - *c*,-n*) ECHO_N= ECHO_C=' -' ECHO_T=' ' ;; - *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; - *) ECHO_N= ECHO_C='\c' ECHO_T= ;; -esac - -if expr a : '\(a\)' >/dev/null 2>&1; then - as_expr=expr -else - as_expr=false -fi - -rm -f conf$$ conf$$.exe conf$$.file -echo >conf$$.file -if ln -s conf$$.file conf$$ 2>/dev/null; then - # We could just check for DJGPP; but this test a) works b) is more generic - # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). - if test -f conf$$.exe; then - # Don't use ln at all; we don't have any links - as_ln_s='cp -p' - else - as_ln_s='ln -s' - fi -elif ln conf$$.file conf$$ 2>/dev/null; then - as_ln_s=ln -else - as_ln_s='cp -p' -fi -rm -f conf$$ conf$$.exe conf$$.file - -if mkdir -p . 2>/dev/null; then - as_mkdir_p=: -else - test -d ./-p && rmdir ./-p - as_mkdir_p=false -fi - -as_executable_p="test -f" - -# Sed expression to map a string onto a valid CPP name. -as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" - -# Sed expression to map a string onto a valid variable name. -as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" - - -# IFS -# We need space, tab and new line, in precisely that order. -as_nl=' -' -IFS=" $as_nl" - -# CDPATH. -$as_unset CDPATH - -exec 6>&1 - -# Open the log real soon, to keep \$[0] and so on meaningful, and to -# report actual input values of CONFIG_FILES etc. instead of their -# values after options handling. Logging --version etc. is OK. -exec 5>>config.log -{ - echo - sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX -## Running $as_me. ## -_ASBOX -} >&5 -cat >&5 <<_CSEOF - -This file was extended by tls $as_me 1.6.7, which was -generated by GNU Autoconf 2.59. Invocation command line was - - CONFIG_FILES = $CONFIG_FILES - CONFIG_HEADERS = $CONFIG_HEADERS - CONFIG_LINKS = $CONFIG_LINKS - CONFIG_COMMANDS = $CONFIG_COMMANDS - $ $0 $@ - -_CSEOF -echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5 -echo >&5 -_ACEOF - -# Files that config.status was made for. -if test -n "$ac_config_files"; then - echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS -fi - -if test -n "$ac_config_headers"; then - echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS -fi - -if test -n "$ac_config_links"; then - echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS -fi - -if test -n "$ac_config_commands"; then - echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS -fi - -cat >>$CONFIG_STATUS <<\_ACEOF - -ac_cs_usage="\ -\`$as_me' instantiates files from templates according to the -current configuration. - -Usage: $0 [OPTIONS] [FILE]... - - -h, --help print this help, then exit - -V, --version print version number, then exit - -q, --quiet do not print progress messages - -d, --debug don't remove temporary files - --recheck update $as_me by reconfiguring in the same conditions - --file=FILE[:TEMPLATE] - instantiate the configuration file FILE - -Configuration files: -$config_files - -Report bugs to ." -_ACEOF - -cat >>$CONFIG_STATUS <<_ACEOF -ac_cs_version="\\ -tls config.status 1.6.7 -configured by $0, generated by GNU Autoconf 2.59, - with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\" - -Copyright (C) 2003 Free Software Foundation, Inc. -This config.status script is free software; the Free Software Foundation -gives unlimited permission to copy, distribute and modify it." -srcdir=$srcdir -INSTALL="$INSTALL" -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF -# If no file are specified by the user, then we need to provide default -# value. By we need to know if files were specified by the user. -ac_need_defaults=: -while test $# != 0 -do - case $1 in - --*=*) - ac_option=`expr "x$1" : 'x\([^=]*\)='` - ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'` - ac_shift=: - ;; - -*) - ac_option=$1 - ac_optarg=$2 - ac_shift=shift - ;; - *) # This is not an option, so the user has probably given explicit - # arguments. - ac_option=$1 - ac_need_defaults=false;; - esac - - case $ac_option in - # Handling of the options. -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF - -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) - ac_cs_recheck=: ;; - --version | --vers* | -V ) - echo "$ac_cs_version"; exit 0 ;; - --he | --h) - # Conflict between --help and --header - { { echo "$as_me:$LINENO: error: ambiguous option: $1 -Try \`$0 --help' for more information." >&5 -echo "$as_me: error: ambiguous option: $1 -Try \`$0 --help' for more information." >&2;} - { (exit 1); exit 1; }; };; - --help | --hel | -h ) - echo "$ac_cs_usage"; exit 0 ;; - --debug | --d* | -d ) - debug=: ;; - --file | --fil | --fi | --f ) - $ac_shift - CONFIG_FILES="$CONFIG_FILES $ac_optarg" - ac_need_defaults=false;; - --header | --heade | --head | --hea ) - $ac_shift - CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg" - ac_need_defaults=false;; - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil | --si | --s) - ac_cs_silent=: ;; - - # This is an error. - -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1 -Try \`$0 --help' for more information." >&5 -echo "$as_me: error: unrecognized option: $1 -Try \`$0 --help' for more information." >&2;} - { (exit 1); exit 1; }; } ;; - - *) ac_config_targets="$ac_config_targets $1" ;; - - esac - shift -done - -ac_configure_extra_args= - -if $ac_cs_silent; then - exec 6>/dev/null - ac_configure_extra_args="$ac_configure_extra_args --silent" -fi - -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF -if \$ac_cs_recheck; then - echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6 - exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion -fi - -_ACEOF - - - - - -cat >>$CONFIG_STATUS <<\_ACEOF -for ac_config_target in $ac_config_targets -do - case "$ac_config_target" in - # Handling of arguments. - "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;; - *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 -echo "$as_me: error: invalid argument: $ac_config_target" >&2;} - { (exit 1); exit 1; }; };; - esac -done - -# If the user did not use the arguments to specify the items to instantiate, -# then the envvar interface is used. Set only those that are not. -# We use the long form for the default assignment because of an extremely -# bizarre bug on SunOS 4.1.3. -if $ac_need_defaults; then - test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files -fi - -# Have a temporary directory for convenience. Make it in the build tree -# simply because there is no reason to put it here, and in addition, -# creating and moving files from /tmp can sometimes cause problems. -# Create a temporary directory, and hook for its removal unless debugging. -$debug || -{ - trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0 - trap '{ (exit 1); exit 1; }' 1 2 13 15 -} - -# Create a (secure) tmp directory for tmp files. - -{ - tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` && - test -n "$tmp" && test -d "$tmp" -} || -{ - tmp=./confstat$$-$RANDOM - (umask 077 && mkdir $tmp) -} || -{ - echo "$me: cannot create a temporary directory in ." >&2 - { (exit 1); exit 1; } -} - -_ACEOF - -cat >>$CONFIG_STATUS <<_ACEOF - -# -# CONFIG_FILES section. -# - -# No need to generate the scripts if there are no CONFIG_FILES. -# This happens for instance when ./config.status config.h -if test -n "\$CONFIG_FILES"; then - # Protect against being on the right side of a sed subst in config.status. - sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g; - s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF -s,@SHELL@,$SHELL,;t t -s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t -s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t -s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t -s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t -s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t -s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t -s,@exec_prefix@,$exec_prefix,;t t -s,@prefix@,$prefix,;t t -s,@program_transform_name@,$program_transform_name,;t t -s,@bindir@,$bindir,;t t -s,@sbindir@,$sbindir,;t t -s,@libexecdir@,$libexecdir,;t t -s,@datadir@,$datadir,;t t -s,@sysconfdir@,$sysconfdir,;t t -s,@sharedstatedir@,$sharedstatedir,;t t -s,@localstatedir@,$localstatedir,;t t -s,@libdir@,$libdir,;t t -s,@includedir@,$includedir,;t t -s,@oldincludedir@,$oldincludedir,;t t -s,@infodir@,$infodir,;t t -s,@mandir@,$mandir,;t t -s,@build_alias@,$build_alias,;t t -s,@host_alias@,$host_alias,;t t -s,@target_alias@,$target_alias,;t t -s,@DEFS@,$DEFS,;t t -s,@ECHO_C@,$ECHO_C,;t t -s,@ECHO_N@,$ECHO_N,;t t -s,@ECHO_T@,$ECHO_T,;t t -s,@LIBS@,$LIBS,;t t -s,@CYGPATH@,$CYGPATH,;t t -s,@EXEEXT@,$EXEEXT,;t t -s,@PKG_LIB_FILE@,$PKG_LIB_FILE,;t t -s,@PKG_STUB_LIB_FILE@,$PKG_STUB_LIB_FILE,;t t -s,@PKG_STUB_SOURCES@,$PKG_STUB_SOURCES,;t t -s,@PKG_STUB_OBJECTS@,$PKG_STUB_OBJECTS,;t t -s,@PKG_TCL_SOURCES@,$PKG_TCL_SOURCES,;t t -s,@PKG_HEADERS@,$PKG_HEADERS,;t t -s,@PKG_INCLUDES@,$PKG_INCLUDES,;t t -s,@PKG_LIBS@,$PKG_LIBS,;t t -s,@PKG_CFLAGS@,$PKG_CFLAGS,;t t -s,@TCL_VERSION@,$TCL_VERSION,;t t -s,@TCL_PATCH_LEVEL@,$TCL_PATCH_LEVEL,;t t -s,@TCL_BIN_DIR@,$TCL_BIN_DIR,;t t -s,@TCL_SRC_DIR@,$TCL_SRC_DIR,;t t -s,@TCL_LIB_FILE@,$TCL_LIB_FILE,;t t -s,@TCL_LIB_FLAG@,$TCL_LIB_FLAG,;t t -s,@TCL_LIB_SPEC@,$TCL_LIB_SPEC,;t t -s,@TCL_STUB_LIB_FILE@,$TCL_STUB_LIB_FILE,;t t -s,@TCL_STUB_LIB_FLAG@,$TCL_STUB_LIB_FLAG,;t t -s,@TCL_STUB_LIB_SPEC@,$TCL_STUB_LIB_SPEC,;t t -s,@TCL_LIBS@,$TCL_LIBS,;t t -s,@TCL_DEFS@,$TCL_DEFS,;t t -s,@TCL_EXTRA_CFLAGS@,$TCL_EXTRA_CFLAGS,;t t -s,@TCL_LD_FLAGS@,$TCL_LD_FLAGS,;t t -s,@TCL_SHLIB_LD_LIBS@,$TCL_SHLIB_LD_LIBS,;t t -s,@CC@,$CC,;t t -s,@CFLAGS@,$CFLAGS,;t t -s,@LDFLAGS@,$LDFLAGS,;t t -s,@CPPFLAGS@,$CPPFLAGS,;t t -s,@ac_ct_CC@,$ac_ct_CC,;t t -s,@OBJEXT@,$OBJEXT,;t t -s,@CPP@,$CPP,;t t -s,@INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t -s,@INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t -s,@INSTALL_DATA@,$INSTALL_DATA,;t t -s,@SET_MAKE@,$SET_MAKE,;t t -s,@RANLIB@,$RANLIB,;t t -s,@ac_ct_RANLIB@,$ac_ct_RANLIB,;t t -s,@EGREP@,$EGREP,;t t -s,@MATH_LIBS@,$MATH_LIBS,;t t -s,@PKG_SOURCES@,$PKG_SOURCES,;t t -s,@PKG_OBJECTS@,$PKG_OBJECTS,;t t -s,@CLEANFILES@,$CLEANFILES,;t t -s,@TCL_INCLUDES@,$TCL_INCLUDES,;t t -s,@TCL_THREADS@,$TCL_THREADS,;t t -s,@SHARED_BUILD@,$SHARED_BUILD,;t t -s,@AR@,$AR,;t t -s,@CELIB_DIR@,$CELIB_DIR,;t t -s,@DL_LIBS@,$DL_LIBS,;t t -s,@CFLAGS_DEBUG@,$CFLAGS_DEBUG,;t t -s,@CFLAGS_OPTIMIZE@,$CFLAGS_OPTIMIZE,;t t -s,@CFLAGS_WARNING@,$CFLAGS_WARNING,;t t -s,@STLIB_LD@,$STLIB_LD,;t t -s,@SHLIB_LD@,$SHLIB_LD,;t t -s,@SHLIB_LD_LIBS@,$SHLIB_LD_LIBS,;t t -s,@SHLIB_CFLAGS@,$SHLIB_CFLAGS,;t t -s,@LD_LIBRARY_PATH_VAR@,$LD_LIBRARY_PATH_VAR,;t t -s,@CFLAGS_DEFAULT@,$CFLAGS_DEFAULT,;t t -s,@LDFLAGS_DEFAULT@,$LDFLAGS_DEFAULT,;t t -s,@TCL_DBGX@,$TCL_DBGX,;t t -s,@SSL_DIR@,$SSL_DIR,;t t -s,@SSL_LIB_DIR@,$SSL_LIB_DIR,;t t -s,@SSL_INCLUDE_DIR@,$SSL_INCLUDE_DIR,;t t -s,@SSL_INCLUDE_DIR_NATIVE@,$SSL_INCLUDE_DIR_NATIVE,;t t -s,@SSL_LIB_DIR_NATIVE@,$SSL_LIB_DIR_NATIVE,;t t -s,@MAKE_LIB@,$MAKE_LIB,;t t -s,@MAKE_SHARED_LIB@,$MAKE_SHARED_LIB,;t t -s,@MAKE_STATIC_LIB@,$MAKE_STATIC_LIB,;t t -s,@MAKE_STUB_LIB@,$MAKE_STUB_LIB,;t t -s,@RANLIB_STUB@,$RANLIB_STUB,;t t -s,@TCLSH_PROG@,$TCLSH_PROG,;t t -s,@LIBOBJS@,$LIBOBJS,;t t -s,@LTLIBOBJS@,$LTLIBOBJS,;t t -CEOF - -_ACEOF - - cat >>$CONFIG_STATUS <<\_ACEOF - # Split the substitutions into bite-sized pieces for seds with - # small command number limits, like on Digital OSF/1 and HP-UX. - ac_max_sed_lines=48 - ac_sed_frag=1 # Number of current file. - ac_beg=1 # First line for current file. - ac_end=$ac_max_sed_lines # Line after last line for current file. - ac_more_lines=: - ac_sed_cmds= - while $ac_more_lines; do - if test $ac_beg -gt 1; then - sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag - else - sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag - fi - if test ! -s $tmp/subs.frag; then - ac_more_lines=false - else - # The purpose of the label and of the branching condition is to - # speed up the sed processing (if there are no `@' at all, there - # is no need to browse any of the substitutions). - # These are the two extra sed commands mentioned above. - (echo ':t - /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed - if test -z "$ac_sed_cmds"; then - ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed" - else - ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed" - fi - ac_sed_frag=`expr $ac_sed_frag + 1` - ac_beg=$ac_end - ac_end=`expr $ac_end + $ac_max_sed_lines` - fi - done - if test -z "$ac_sed_cmds"; then - ac_sed_cmds=cat - fi -fi # test -n "$CONFIG_FILES" - -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF -for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue - # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". - case $ac_file in - - | *:- | *:-:* ) # input from stdin - cat >$tmp/stdin - ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` - ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; - *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` - ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; - * ) ac_file_in=$ac_file.in ;; - esac - - # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories. - ac_dir=`(dirname "$ac_file") 2>/dev/null || -$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$ac_file" : 'X\(//\)[^/]' \| \ - X"$ac_file" : 'X\(//\)$' \| \ - X"$ac_file" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || -echo X"$ac_file" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X\(\/\/\)[^/].*/{ s//\1/; q; } - /^X\(\/\/\)$/{ s//\1/; q; } - /^X\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` - { if $as_mkdir_p; then - mkdir -p "$ac_dir" - else - as_dir="$ac_dir" - as_dirs= - while test ! -d "$as_dir"; do - as_dirs="$as_dir $as_dirs" - as_dir=`(dirname "$as_dir") 2>/dev/null || -$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X\(//\)[^/]' \| \ - X"$as_dir" : 'X\(//\)$' \| \ - X"$as_dir" : 'X\(/\)' \| \ - . : '\(.\)' 2>/dev/null || -echo X"$as_dir" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } - /^X\(\/\/\)[^/].*/{ s//\1/; q; } - /^X\(\/\/\)$/{ s//\1/; q; } - /^X\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` - done - test ! -n "$as_dirs" || mkdir $as_dirs - fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 -echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} - { (exit 1); exit 1; }; }; } - - ac_builddir=. - -if test "$ac_dir" != .; then - ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` - # A "../" for each directory in $ac_dir_suffix. - ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` -else - ac_dir_suffix= ac_top_builddir= -fi - -case $srcdir in - .) # No --srcdir option. We are building in place. - ac_srcdir=. - if test -z "$ac_top_builddir"; then - ac_top_srcdir=. - else - ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` - fi ;; - [\\/]* | ?:[\\/]* ) # Absolute path. - ac_srcdir=$srcdir$ac_dir_suffix; - ac_top_srcdir=$srcdir ;; - *) # Relative path. - ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix - ac_top_srcdir=$ac_top_builddir$srcdir ;; -esac - -# Do not use `cd foo && pwd` to compute absolute paths, because -# the directories may not exist. -case `pwd` in -.) ac_abs_builddir="$ac_dir";; -*) - case "$ac_dir" in - .) ac_abs_builddir=`pwd`;; - [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; - *) ac_abs_builddir=`pwd`/"$ac_dir";; - esac;; -esac -case $ac_abs_builddir in -.) ac_abs_top_builddir=${ac_top_builddir}.;; -*) - case ${ac_top_builddir}. in - .) ac_abs_top_builddir=$ac_abs_builddir;; - [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; - *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; - esac;; -esac -case $ac_abs_builddir in -.) ac_abs_srcdir=$ac_srcdir;; -*) - case $ac_srcdir in - .) ac_abs_srcdir=$ac_abs_builddir;; - [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; - *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; - esac;; -esac -case $ac_abs_builddir in -.) ac_abs_top_srcdir=$ac_top_srcdir;; -*) - case $ac_top_srcdir in - .) ac_abs_top_srcdir=$ac_abs_builddir;; - [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; - *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; - esac;; -esac - - - case $INSTALL in - [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; - *) ac_INSTALL=$ac_top_builddir$INSTALL ;; - esac - - if test x"$ac_file" != x-; then - { echo "$as_me:$LINENO: creating $ac_file" >&5 -echo "$as_me: creating $ac_file" >&6;} - rm -f "$ac_file" - fi - # Let's still pretend it is `configure' which instantiates (i.e., don't - # use $as_me), people would be surprised to read: - # /* config.h. Generated by config.status. */ - if test x"$ac_file" = x-; then - configure_input= - else - configure_input="$ac_file. " - fi - configure_input=$configure_input"Generated from `echo $ac_file_in | - sed 's,.*/,,'` by configure." - - # First look for the input files in the build tree, otherwise in the - # src tree. - ac_file_inputs=`IFS=: - for f in $ac_file_in; do - case $f in - -) echo $tmp/stdin ;; - [\\/$]*) - # Absolute (can't be DOS-style, as IFS=:) - test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 -echo "$as_me: error: cannot find input file: $f" >&2;} - { (exit 1); exit 1; }; } - echo "$f";; - *) # Relative - if test -f "$f"; then - # Build tree - echo "$f" - elif test -f "$srcdir/$f"; then - # Source tree - echo "$srcdir/$f" - else - # /dev/null tree - { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 -echo "$as_me: error: cannot find input file: $f" >&2;} - { (exit 1); exit 1; }; } - fi;; - esac - done` || { (exit 1); exit 1; } -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF - sed "$ac_vpsub -$extrasub -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF -:t -/@[a-zA-Z_][a-zA-Z_0-9]*@/!b -s,@configure_input@,$configure_input,;t t -s,@srcdir@,$ac_srcdir,;t t -s,@abs_srcdir@,$ac_abs_srcdir,;t t -s,@top_srcdir@,$ac_top_srcdir,;t t -s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t -s,@builddir@,$ac_builddir,;t t -s,@abs_builddir@,$ac_abs_builddir,;t t -s,@top_builddir@,$ac_top_builddir,;t t -s,@abs_top_builddir@,$ac_abs_top_builddir,;t t -s,@INSTALL@,$ac_INSTALL,;t t -" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out - rm -f $tmp/stdin - if test x"$ac_file" != x-; then - mv $tmp/out $ac_file - else - cat $tmp/out - rm -f $tmp/out - fi - -done -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF - -{ (exit 0); exit 0; } -_ACEOF -chmod +x $CONFIG_STATUS -ac_clean_files=$ac_clean_files_save - - -# configure is writing to config.log, and then calls config.status. -# config.status does its own redirection, appending to config.log. -# Unfortunately, on DOS this fails, as config.log is still kept open -# by configure, so config.status won't be able to write to it; its -# output is simply discarded. So we exec the FD to /dev/null, -# effectively closing config.log, so it can be properly (re)opened and -# appended to by config.status. When coming back to configure, we -# need to make the FD available again. -if test "$no_create" != yes; then - ac_cs_success=: - ac_config_status_args= - test "$silent" = yes && - ac_config_status_args="$ac_config_status_args --quiet" - exec 5>/dev/null - $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false - exec 5>>config.log - # Use ||, not &&, to avoid exiting from the if with $? = 1, which - # would make configure fail if this is the last instruction. - $ac_cs_success || { (exit 1); exit 1; } -fi - Index: configure.in ================================================================== --- configure.in +++ configure.in @@ -1,211 +1,101 @@ -#!/bin/bash -norc -dnl This file is an input file used by the GNU "autoconf" program to -dnl generate the file "configure", which is run during Tcl installation -dnl to configure the system for the local environment. -dnl -dnl This file contains code to generate "tls" using either the -dnl OpenSSL libraries or libraries from the commercial BSAFE SSL-C -dnl product from RSA Security. In the United States, it is necessary -dnl to use the RSA BSAFE libraries for any product developed for -dnl commercial use. Licensing information for BSAFE SSL-C may be -dnl obtained from RSA Data Scurity Inc., San Mateo, California, USA. -dnl Their home page on the web is "www.rsasecurity.com". -# -# RCS: @(#) $Id: configure.in,v 1.31 2015/07/07 17:16:02 andreas_kupries Exp $ - - -#-------------------------------------------------------------------- -# macro used to verify that the configure script can find the sources -#-------------------------------------------------------------------- - -AC_INIT([tls], [1.6.7]) - -TEA_INIT([3.8]) - -AC_CONFIG_AUX_DIR(tclconfig) - -#-------------------------------------------------------------------- -# Load the tclConfig.sh file -#-------------------------------------------------------------------- - -TEA_PATH_TCLCONFIG -TEA_LOAD_TCLCONFIG - -#----------------------------------------------------------------------- -# Handle the --prefix=... option by defaulting to what Tcl gave. -# Must be called after TEA_LOAD_TCLCONFIG and before TEA_SETUP_COMPILER. -#----------------------------------------------------------------------- - -TEA_PREFIX - -#----------------------------------------------------------------------- -# Standard compiler checks. -# This sets up CC by using the CC env var, or looks for gcc otherwise. -# This also calls AC_PROG_CC, AC_PROG_INSTALL and a few others to create -# the basic setup necessary to compile executables. -#----------------------------------------------------------------------- - -TEA_SETUP_COMPILER - -#----------------------------------------------------------------------- -# __CHANGE__ -# Specify the C source files to compile in TEA_ADD_SOURCES, -# public headers that need to be installed in TEA_ADD_HEADERS, -# stub library C source files to compile in TEA_ADD_STUB_SOURCES, -# and runtime Tcl library files in TEA_ADD_TCL_SOURCES. -# This defines PKG(_STUB)_SOURCES, PKG(_STUB)_OBJECTS, PKG_HEADERS -# and PKG_TCL_SOURCES. -#----------------------------------------------------------------------- - -TEA_ADD_SOURCES([]) -TEA_ADD_HEADERS([]) -TEA_ADD_INCLUDES([]) -TEA_ADD_LIBS([]) -TEA_ADD_CFLAGS([]) -TEA_ADD_STUB_SOURCES([]) -TEA_ADD_TCL_SOURCES([]) - -#-------------------------------------------------------------------- -# A few miscellaneous platform-specific items: -# -# Define a special symbol for Windows (BUILD_sample in this case) so -# that we create the export library with the dll. See sha1.h on how -# to use this. -# -# Windows creates a few extra files that need to be cleaned up. -# You can add more files to clean if your extension creates any extra -# files. -# -# Define any extra compiler flags in the PACKAGE_CFLAGS variable. -# These will be appended to the current set of compiler flags for -# your system. -#-------------------------------------------------------------------- - -if test "${TEA_PLATFORM}" = "windows" ; then - AC_DEFINE(BUILD_tls) - AC_DEFINE(WINDOWS) - CLEANFILES="pkgIndex.tcl *.lib *.dll *.exp *.ilk *.pdb vc*.pch" -else - CLEANFILES="pkgIndex.tcl" -fi -AC_SUBST(CLEANFILES) - -#-------------------------------------------------------------------- -# Choose which headers you need. Extension authors should try very -# hard to only rely on the Tcl public header files. Internal headers -# contain private data structures and are subject to change without -# notice. -# This MUST be called after TEA_LOAD_TCLCONFIG / TEA_LOAD_TKCONFIG -#-------------------------------------------------------------------- - -TEA_PUBLIC_TCL_HEADERS - -#-------------------------------------------------------------------- -# Check whether --enable-threads or --disable-threads was given. -#-------------------------------------------------------------------- - -TEA_ENABLE_THREADS - -#-------------------------------------------------------------------- -# The statement below defines a collection of symbols related to -# building as a shared library instead of a static library. -#-------------------------------------------------------------------- - -TEA_ENABLE_SHARED - -#-------------------------------------------------------------------- -# This macro figures out what flags to use with the compiler/linker -# when building shared/static debug/optimized objects. This information -# can be taken from the tclConfig.sh file, but this figures it all out. -#-------------------------------------------------------------------- - -TEA_CONFIG_CFLAGS - -#-------------------------------------------------------------------- -# Set the default compiler switches based on the --enable-symbols option. -#-------------------------------------------------------------------- - -TEA_ENABLE_SYMBOLS - -#-------------------------------------------------------------------- -# Everyone should be linking against the Tcl stub library. If you -# can't for some reason, remove this definition. If you aren't using -# stubs, you also need to modify the SHLIB_LD_LIBS setting below to -# link against the non-stubbed Tcl library. Add Tk too if necessary. -#-------------------------------------------------------------------- - -AC_DEFINE(USE_TCL_STUBS) - -#-------------------------------------------------------------------- -# If the variable OPENSSL is set, we will build with the OpenSSL -# libraries. If it is not set, then we will use RSA BSAFE SSL-C -# libraries instead of the default OpenSSL libaries. -#-------------------------------------------------------------------- - -OPENSSL="1" - -TLS_CHECK_SSL - -#-------------------------------------------------------------------- -# Determine if we should use the patented encryption code -#-------------------------------------------------------------------- - -AC_ARG_ENABLE(patents, [ --enable-patents Use patented code. Default is enabled], PATENTS=${enableval}, PATENTS=yes) - -if test ${PATENTS} = no; then - AC_DEFINE([NO_PATENTS]) -fi - -#-------------------------------------------------------------------- -# This macro generates a line to use when building a library. It -# depends on values set by the TEA_ENABLE_SHARED, TEA_ENABLE_SYMBOLS, -# and TEA_LOAD_TCLCONFIG macros above. -#-------------------------------------------------------------------- - -TEA_MAKE_LIB - -#-------------------------------------------------------------------- -# Shared libraries and static libraries have different names. -# Also, windows libraries and unix libraries have different names. -# For the OpenSSL version, I chose to use the same library names that -# OpenSSL uses as its default names. -#-------------------------------------------------------------------- - -if test "${TEA_PLATFORM}" = "windows" ; then - if test "$GCC" = "yes"; then - TEA_ADD_LIBS([-L${SSL_LIB_DIR_NATIVE}]) - else - TEA_ADD_LIBS([-libpath:${SSL_LIB_DIR_NATIVE}]) - fi - if test -n "${OPENSSL}"; then - TEA_ADD_LIBS([ssleay32.lib libeay32.lib]) - else - TEA_ADD_LIBS([sslc32.lib]) - fi -else - # Subst runtime dir here, use -R and -L where necessary. [Bug 1742859] - LIB_RUNTIME_DIR=${SSL_LIB_DIR} - eval "LD_SEARCH_FLAGS=\"${LD_SEARCH_FLAGS}\"" - if test -n "${OPENSSL}"; then - TEA_ADD_LIBS([${LD_SEARCH_FLAGS} -L${SSL_LIB_DIR} -lssl -lcrypto ${GCCPATH} ${GCCLIB}]) - else - TEA_ADD_LIBS([${LD_SEARCH_FLAGS} -L${SSL_LIB_DIR} -lsslc]) - fi -fi - -#-------------------------------------------------------------------- -# Find tclsh so that we can run pkg_mkIndex to generate the pkgIndex.tcl -# file during the install process. Don't run the TCLSH_PROG through -# ${CYGPATH} because it's being used directly by make. -# Require that we use a tclsh shell version 8.2 or later since earlier -# versions have bugs in the pkg_mkIndex routine. -# Add WISH as well if this is a Tk extension. -#-------------------------------------------------------------------- - -TEA_PROG_TCLSH - -#-------------------------------------------------------------------- -# Finally, substitute all of the various values into the Makefile. -#-------------------------------------------------------------------- - -AC_OUTPUT([Makefile]) +dnl Define ourselves +AC_INIT(tcltls, 1.256) + +dnl Checks for programs. +AC_PROG_CC +AC_PROG_MAKE_SET +AC_PROG_INSTALL +AC_GNU_SOURCE + +dnl Determine system information +DC_CHK_OS_INFO + +dnl Look for appropriate headers +AC_CHECK_HEADERS(unistd.h stdlib.h string.h strings.h) + +dnl Perform Tcl Extension required stuff +TCLEXT_INIT + +if test "$TCLEXT_BUILD" != 'static'; then + dnl Determine how to make shared objects + DC_GET_SHOBJFLAGS + + EXTENSION_TARGET="tcltls.${SHOBJEXT}" +else + AC_CHECK_TOOL([AR], [ar], [false]) + AC_CHECK_TOOL([RANLIB], [ranlib], [:]) + EXTENSION_TARGET="tcltls.a" +fi +AC_SUBST(EXTENSION_TARGET) +AC_SUBST(TCLEXT_BUILD) + +dnl Determine what SSL library to link with +AC_ARG_WITH([ssl], AS_HELP_STRING([--with-ssl], [name of ssl library to build against (openssl, libressl, nss, auto)]), [ + if test "$withval" = "no"; then + AC_MSG_ERROR([You may not specify --without-ssl]) + fi + + if test "$withval" = "yes"; then + AC_MSG_ERROR([If you specify --with-ssl then you must provide a value]) + fi + + tcltls_ssl_lib="$withval" +], [ + tcltls_ssl_lib='auto' +]) + +dnl Enable support for building the same library every time +tcltls_deterministic='false' +AC_ARG_ENABLE([deterministic], AS_HELP_STRING([--enable-deterministic], [enable deterministic parameters]), [ + if test "$enableval" = "yes"; then + tcltls_deterministic='true' + fi +]) +if test "$tcltls_deterministic" = 'true'; then + GEN_DH_PARAMS_ARGS='fallback' +else + GEN_DH_PARAMS_ARGS='' +fi +AC_SUBST(GEN_DH_PARAMS_ARGS) + +dnl Enable support for a debugging build +tcltls_debug='false' +AC_ARG_ENABLE([debug], AS_HELP_STRING([--enable-debug], [enable debugging parameters]), [ + if test "$enableval" = "yes"; then + tcltls_debug='true' + fi +]) +if test "$tcltls_debug" = 'true'; then + AC_DEFINE(TCLEXT_TCLTLS_DEBUG, [1], [Enable debugging build]) +fi + +AC_CHECK_TOOL([PKGCONFIG], [pkg-config], [false]) + +dnl XXX:TODO: Automatically determine the SSL library to use +dnl defaulting to OpenSSL for compatibility reasons +if test "$tcltls_ssl_lib" = 'auto'; then + tcltls_ssl_lib='openssl' +fi + +AC_MSG_CHECKING([which TLS library to use]) +AS_CASE([$tcltls_ssl_lib], + [openssl], [ + AC_MSG_RESULT([openssl]) + + LIBS="${LIBS} `"${PKGCONFIG}" openssl --libs`" + CFLAGS="${CFLAGS} `"${PKGCONFIG}" openssl --cflags-only-other`" + CPPFLAGS="${CPPFLAGS} `"${PKGCONFIG}" openssl --cflags-only-I`" + ], + [libressl], [ + AC_MSG_RESULT([libressl]) + ], + [nss], [ + AC_MSG_RESULT([nss]) + ], + [ + AC_MSG_ERROR([Unsupported SSL library: $tcltls_ssl_lib]) + ] +) + +dnl Produce output +AC_OUTPUT(Makefile pkgIndex.tcl) DELETED fixstrtod.c Index: fixstrtod.c ================================================================== --- fixstrtod.c +++ /dev/null @@ -1,38 +0,0 @@ -/* - * fixstrtod.c -- - * - * Source code for the "fixstrtod" procedure. This procedure is - * used in place of strtod under Solaris 2.4, in order to fix - * a bug where the "end" pointer gets set incorrectly. - * - * Copyright (c) 1995 Sun Microsystems, Inc. - * - * See the file "license.terms" for information on usage and redistribution - * of this file, and for a DISCLAIMER OF ALL WARRANTIES. - * - * SCCS: @(#) fixstrtod.c 1.5 96/02/15 12:08:21 - */ - -#include - -#undef strtod - -/* - * Declare strtod explicitly rather than including stdlib.h, since in - * somes systems (e.g. SunOS 4.1.4) stdlib.h doesn't declare strtod. - */ - -extern double strtod(); - -double -fixstrtod(string, endPtr) - char *string; - char **endPtr; -{ - double d; - d = strtod(string, endPtr); - if ((endPtr != NULL) && (*endPtr != string) && ((*endPtr)[-1] == 0)) { - *endPtr -= 1; - } - return d; -} ADDED gen_dh_params Index: gen_dh_params ================================================================== --- /dev/null +++ gen_dh_params @@ -0,0 +1,95 @@ +#! /usr/bin/env bash + +bits='2048' + +function openssl_dhparam() { + local output + + if [ -x "$(which openssl 2>/dev/null)" ]; then + output="$(set -o pipefail; openssl dhparam -C "$@" 2>/dev/null | sed '/^-----BEGIN DH PARAMETERS-----$/,/^-----END DH PARAMETERS-----$/ d;/^#/ d')" || return 1 + + echo "${output}" + + return 0 + fi + + return 1 +} + +function gen_dh_params_openssl() { + openssl_dhparam "${bits}" < /dev/null || return 1 + return 0 +} + +function gen_dh_params_remote() { + local input output url + + url="https://2ton.com.au/dhparam/${bits}" + + input="$(curl "${url}")" || \ + input="$(wget -O - -o /dev/null "${url}")" || return 1 + + if output="$(echo "${input}" | openssl_dhparam)"; then + echo "${output}" + + return 0 + fi + + return 1 +} + +function gen_dh_params_fallback() { + cat << \_EOF_ +DH *get_dh2048() + { + static unsigned char dh2048_p[]={ + 0xC1,0x51,0x58,0x69,0xFB,0xE8,0x6C,0x47,0x2B,0x86,0x61,0x4F, + 0x20,0x2E,0xD3,0xFC,0x19,0xEE,0xB8,0xF3,0x35,0x7D,0xBA,0x86, + 0x2A,0xC3,0xC8,0x6E,0xF4,0x99,0x75,0x65,0xD3,0x7A,0x9E,0xDF, + 0xD4,0x1F,0x88,0xE3,0x17,0xFC,0xA1,0xED,0xA2,0xB6,0x77,0x84, + 0xAA,0x08,0xF2,0x97,0x59,0x7A,0xA0,0x03,0x0D,0x3E,0x7E,0x6D, + 0x65,0x6A,0xA4,0xEA,0x54,0xA9,0x52,0x5F,0x63,0xB4,0xBC,0x98, + 0x4E,0xF6,0xE1,0xA4,0xEE,0x16,0x0A,0xB0,0x01,0xBD,0x9F,0xA1, + 0xE8,0x23,0x29,0x56,0x40,0x95,0x13,0xEB,0xCB,0xD5,0xFC,0x76, + 0x1A,0x41,0x26,0xCE,0x20,0xEB,0x30,0x10,0x17,0x07,0xE1,0x8C, + 0xAC,0x57,0x37,0x8B,0xE8,0x01,0xDE,0xA9,0xEF,0xA4,0xC2,0xA4, + 0x6E,0x48,0x25,0x11,0x33,0x11,0xD4,0x52,0x79,0x87,0x9F,0x75, + 0x61,0xF7,0x9C,0x7D,0x36,0x41,0xCB,0xEC,0x8F,0xEA,0x4A,0x47, + 0x6A,0x36,0x37,0x75,0xB9,0x8E,0xF5,0x5F,0x67,0xCF,0x1F,0xD8, + 0xCA,0x70,0x42,0xC7,0xA2,0xED,0x0F,0x7D,0xBE,0x43,0x08,0x28, + 0x66,0x3D,0xDD,0x87,0x0D,0x61,0x6E,0xD0,0xE7,0x49,0xD1,0x70, + 0xA9,0x4D,0xD5,0xFD,0xED,0xF2,0x6D,0x32,0x17,0x97,0x5B,0x06, + 0x60,0x9C,0x5F,0xA3,0x5D,0x34,0x14,0x7E,0x63,0x54,0xE4,0x7E, + 0x09,0x8F,0xBB,0x8E,0xA0,0xD0,0x96,0xAC,0x30,0x20,0x39,0x3B, + 0x8C,0x92,0x65,0x37,0x0A,0x8F,0xEC,0x72,0x8B,0x61,0x7D,0x62, + 0x24,0x54,0xE9,0x1D,0x01,0x68,0x89,0xC4,0x7B,0x3C,0x48,0x62, + 0x9B,0x83,0x11,0x3A,0x0B,0x0D,0xEF,0x5A,0xE4,0x7A,0xA0,0x69, + 0xF4,0x54,0xB5,0x5B, + }; + static unsigned char dh2048_g[]={ + 0x02, + }; + DH *dh; + + if ((dh=DH_new()) == NULL) return(NULL); + dh->p=BN_bin2bn(dh2048_p,sizeof(dh2048_p),NULL); + dh->g=BN_bin2bn(dh2048_g,sizeof(dh2048_g),NULL); + if ((dh->p == NULL) || (dh->g == NULL)) + { DH_free(dh); return(NULL); } + return(dh); + } +_EOF_ +} + +# Enable support for giving the same DH params each time +if [ "$1" = 'fallback' ]; then + gen_dh_params_fallback && exit 0 + + exit 1 +fi + +gen_dh_params_openssl && exit 0 +gen_dh_params_remote && exit 0 +gen_dh_params_fallback && exit 0 + +exit 1 ADDED pkgIndex.tcl.in Index: pkgIndex.tcl.in ================================================================== --- /dev/null +++ pkgIndex.tcl.in @@ -0,0 +1,12 @@ +package ifneeded tls @PACKAGE_VERSION@ [list apply {{dir} { + if {{@TCLEXT_BUILD@} eq "static"} { + load {} Tls + } else { + load [file join $dir tcltls.@SHOBJEXT@] Tls + } + + set tlsTclInitScript [file join $dir tls.tcl] + if {[file exists $tlsTclInitScript]} { + source $tlsTclInitScript + } +}} $dir] Index: tclOpts.h ================================================================== --- tclOpts.h +++ tclOpts.h @@ -1,10 +1,8 @@ /* * Copyright (C) 1997-2000 Matt Newman * - * $Header: /home/rkeene/tmp/cvs2fossil/../tcltls/tls/tls/tclOpts.h,v 1.2 2000/01/20 01:49:31 aborr Exp $ - * * Stylized option processing - requires consitent * external vars: opt, idx, objc, objv */ #ifndef _TCL_OPTS_H #define _TCL_OPTS_H DELETED tclconfig/README.txt Index: tclconfig/README.txt ================================================================== --- tclconfig/README.txt +++ /dev/null @@ -1,26 +0,0 @@ -These files comprise the basic building blocks for a Tcl Extension -Architecture (TEA) extension. For more information on TEA see: - - http://www.tcl.tk/doc/tea/ - -This package is part of the Tcl project at SourceForge, and latest -sources should be available there: - - http://tcl.sourceforge.net/ - -This package is a freely available open source package. You can do -virtually anything you like with it, such as modifying it, redistributing -it, and selling it either in whole or in part. - -CONTENTS -======== -The following is a short description of the files you will find in -the sample extension. - -README.txt This file - -install-sh Program used for copying binaries and script files - to their install locations. - -tcl.m4 Collection of Tcl autoconf macros. Included by a package's - aclocal.m4 to define TEA_* macros. DELETED tclconfig/install-sh Index: tclconfig/install-sh ================================================================== --- tclconfig/install-sh +++ /dev/null @@ -1,119 +0,0 @@ -#!/bin/sh - -# -# install - install a program, script, or datafile -# This comes from X11R5; it is not part of GNU. -# -# $XConsortium: install.sh,v 1.2 89/12/18 14:47:22 jim Exp $ -# -# This script is compatible with the BSD install script, but was written -# from scratch. -# - - -# set DOITPROG to echo to test this script - -# Don't use :- since 4.3BSD and earlier shells don't like it. -doit="${DOITPROG-}" - - -# put in absolute paths if you don't have them in your path; or use env. vars. - -mvprog="${MVPROG-mv}" -cpprog="${CPPROG-cp}" -chmodprog="${CHMODPROG-chmod}" -chownprog="${CHOWNPROG-chown}" -chgrpprog="${CHGRPPROG-chgrp}" -stripprog="${STRIPPROG-strip}" -rmprog="${RMPROG-rm}" - -instcmd="$mvprog" -chmodcmd="" -chowncmd="" -chgrpcmd="" -stripcmd="" -rmcmd="$rmprog -f" -mvcmd="$mvprog" -src="" -dst="" - -while [ x"$1" != x ]; do - case $1 in - -c) instcmd="$cpprog" - shift - continue;; - - -m) chmodcmd="$chmodprog $2" - shift - shift - continue;; - - -o) chowncmd="$chownprog $2" - shift - shift - continue;; - - -g) chgrpcmd="$chgrpprog $2" - shift - shift - continue;; - - -s) stripcmd="$stripprog" - shift - continue;; - - *) if [ x"$src" = x ] - then - src=$1 - else - dst=$1 - fi - shift - continue;; - esac -done - -if [ x"$src" = x ] -then - echo "install: no input file specified" - exit 1 -fi - -if [ x"$dst" = x ] -then - echo "install: no destination specified" - exit 1 -fi - - -# If destination is a directory, append the input filename; if your system -# does not like double slashes in filenames, you may need to add some logic - -if [ -d $dst ] -then - dst="$dst"/`basename $src` -fi - -# Make a temp file name in the proper directory. - -dstdir=`dirname $dst` -dsttmp=$dstdir/#inst.$$# - -# Move or copy the file name to the temp name - -$doit $instcmd $src $dsttmp - -# and set any options; do chmod last to preserve setuid bits - -if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; fi -if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; fi -if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; fi -if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; fi - -# Now rename the file to the real destination. - -$doit $rmcmd $dst -$doit $mvcmd $dsttmp $dst - - -exit 0 DELETED tclconfig/tcl.m4 Index: tclconfig/tcl.m4 ================================================================== --- tclconfig/tcl.m4 +++ /dev/null @@ -1,3998 +0,0 @@ -# tcl.m4 -- -# -# This file provides a set of autoconf macros to help TEA-enable -# a Tcl extension. -# -# Copyright (c) 1999-2000 Ajuba Solutions. -# Copyright (c) 2002-2005 ActiveState Corporation. -# -# See the file "license.terms" for information on usage and redistribution -# of this file, and for a DISCLAIMER OF ALL WARRANTIES. -# -# RCS: @(#) $Id: tcl.m4,v 1.7 2010/08/12 01:30:44 hobbs2 Exp $ - -AC_PREREQ(2.57) - -dnl TEA extensions pass us the version of TEA they think they -dnl are compatible with (must be set in TEA_INIT below) -dnl TEA_VERSION="3.8" - -# Possible values for key variables defined: -# -# TEA_WINDOWINGSYSTEM - win32 aqua x11 (mirrors 'tk windowingsystem') -# TEA_PLATFORM - windows unix -# - -#------------------------------------------------------------------------ -# TEA_PATH_TCLCONFIG -- -# -# Locate the tclConfig.sh file and perform a sanity check on -# the Tcl compile flags -# -# Arguments: -# none -# -# Results: -# -# Adds the following arguments to configure: -# --with-tcl=... -# -# Defines the following vars: -# TCL_BIN_DIR Full path to the directory containing -# the tclConfig.sh file -#------------------------------------------------------------------------ - -AC_DEFUN([TEA_PATH_TCLCONFIG], [ - dnl TEA specific: Make sure we are initialized - AC_REQUIRE([TEA_INIT]) - # - # Ok, lets find the tcl configuration - # First, look for one uninstalled. - # the alternative search directory is invoked by --with-tcl - # - - if test x"${no_tcl}" = x ; then - # we reset no_tcl in case something fails here - no_tcl=true - AC_ARG_WITH(tcl, - AC_HELP_STRING([--with-tcl], - [directory containing tcl configuration (tclConfig.sh)]), - with_tclconfig="${withval}") - AC_MSG_CHECKING([for Tcl configuration]) - AC_CACHE_VAL(ac_cv_c_tclconfig,[ - - # First check to see if --with-tcl was specified. - if test x"${with_tclconfig}" != x ; then - case "${with_tclconfig}" in - */tclConfig.sh ) - if test -f "${with_tclconfig}"; then - AC_MSG_WARN([--with-tcl argument should refer to directory containing tclConfig.sh, not to tclConfig.sh itself]) - with_tclconfig="`echo "${with_tclconfig}" | sed 's!/tclConfig\.sh$!!'`" - fi ;; - esac - if test -f "${with_tclconfig}/tclConfig.sh" ; then - ac_cv_c_tclconfig="`(cd "${with_tclconfig}"; pwd)`" - else - AC_MSG_ERROR([${with_tclconfig} directory doesn't contain tclConfig.sh]) - fi - fi - - # then check for a private Tcl installation - if test x"${ac_cv_c_tclconfig}" = x ; then - for i in \ - ../tcl \ - `ls -dr ../tcl[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \ - `ls -dr ../tcl[[8-9]].[[0-9]] 2>/dev/null` \ - `ls -dr ../tcl[[8-9]].[[0-9]]* 2>/dev/null` \ - ../../tcl \ - `ls -dr ../../tcl[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \ - `ls -dr ../../tcl[[8-9]].[[0-9]] 2>/dev/null` \ - `ls -dr ../../tcl[[8-9]].[[0-9]]* 2>/dev/null` \ - ../../../tcl \ - `ls -dr ../../../tcl[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \ - `ls -dr ../../../tcl[[8-9]].[[0-9]] 2>/dev/null` \ - `ls -dr ../../../tcl[[8-9]].[[0-9]]* 2>/dev/null` ; do - if test "${TEA_PLATFORM}" = "windows" \ - -a -f "$i/win/tclConfig.sh" ; then - ac_cv_c_tclconfig="`(cd $i/win; pwd)`" - break - fi - if test -f "$i/unix/tclConfig.sh" ; then - ac_cv_c_tclconfig="`(cd $i/unix; pwd)`" - break - fi - done - fi - - # on Darwin, check in Framework installation locations - if test "`uname -s`" = "Darwin" -a x"${ac_cv_c_tclconfig}" = x ; then - for i in `ls -d ~/Library/Frameworks 2>/dev/null` \ - `ls -d /Library/Frameworks 2>/dev/null` \ - `ls -d /Network/Library/Frameworks 2>/dev/null` \ - `ls -d /System/Library/Frameworks 2>/dev/null` \ - ; do - if test -f "$i/Tcl.framework/tclConfig.sh" ; then - ac_cv_c_tclconfig="`(cd $i/Tcl.framework; pwd)`" - break - fi - done - fi - - # TEA specific: on Windows, check in common installation locations - if test "${TEA_PLATFORM}" = "windows" \ - -a x"${ac_cv_c_tclconfig}" = x ; then - for i in `ls -d C:/Tcl/lib 2>/dev/null` \ - `ls -d C:/Progra~1/Tcl/lib 2>/dev/null` \ - ; do - if test -f "$i/tclConfig.sh" ; then - ac_cv_c_tclconfig="`(cd $i; pwd)`" - break - fi - done - fi - - # check in a few common install locations - if test x"${ac_cv_c_tclconfig}" = x ; then - for i in `ls -d ${libdir} 2>/dev/null` \ - `ls -d ${exec_prefix}/lib 2>/dev/null` \ - `ls -d ${prefix}/lib 2>/dev/null` \ - `ls -d /usr/local/lib 2>/dev/null` \ - `ls -d /usr/contrib/lib 2>/dev/null` \ - `ls -d /usr/lib 2>/dev/null` \ - ; do - if test -f "$i/tclConfig.sh" ; then - ac_cv_c_tclconfig="`(cd $i; pwd)`" - break - fi - done - fi - - # check in a few other private locations - if test x"${ac_cv_c_tclconfig}" = x ; then - for i in \ - ${srcdir}/../tcl \ - `ls -dr ${srcdir}/../tcl[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \ - `ls -dr ${srcdir}/../tcl[[8-9]].[[0-9]] 2>/dev/null` \ - `ls -dr ${srcdir}/../tcl[[8-9]].[[0-9]]* 2>/dev/null` ; do - if test "${TEA_PLATFORM}" = "windows" \ - -a -f "$i/win/tclConfig.sh" ; then - ac_cv_c_tclconfig="`(cd $i/win; pwd)`" - break - fi - if test -f "$i/unix/tclConfig.sh" ; then - ac_cv_c_tclconfig="`(cd $i/unix; pwd)`" - break - fi - done - fi - ]) - - if test x"${ac_cv_c_tclconfig}" = x ; then - TCL_BIN_DIR="# no Tcl configs found" - AC_MSG_ERROR([Can't find Tcl configuration definitions]) - else - no_tcl= - TCL_BIN_DIR="${ac_cv_c_tclconfig}" - AC_MSG_RESULT([found ${TCL_BIN_DIR}/tclConfig.sh]) - fi - fi -]) - -#------------------------------------------------------------------------ -# TEA_PATH_TKCONFIG -- -# -# Locate the tkConfig.sh file -# -# Arguments: -# none -# -# Results: -# -# Adds the following arguments to configure: -# --with-tk=... -# -# Defines the following vars: -# TK_BIN_DIR Full path to the directory containing -# the tkConfig.sh file -#------------------------------------------------------------------------ - -AC_DEFUN([TEA_PATH_TKCONFIG], [ - # - # Ok, lets find the tk configuration - # First, look for one uninstalled. - # the alternative search directory is invoked by --with-tk - # - - if test x"${no_tk}" = x ; then - # we reset no_tk in case something fails here - no_tk=true - AC_ARG_WITH(tk, - AC_HELP_STRING([--with-tk], - [directory containing tk configuration (tkConfig.sh)]), - with_tkconfig="${withval}") - AC_MSG_CHECKING([for Tk configuration]) - AC_CACHE_VAL(ac_cv_c_tkconfig,[ - - # First check to see if --with-tkconfig was specified. - if test x"${with_tkconfig}" != x ; then - case "${with_tkconfig}" in - */tkConfig.sh ) - if test -f "${with_tkconfig}"; then - AC_MSG_WARN([--with-tk argument should refer to directory containing tkConfig.sh, not to tkConfig.sh itself]) - with_tkconfig="`echo "${with_tkconfig}" | sed 's!/tkConfig\.sh$!!'`" - fi ;; - esac - if test -f "${with_tkconfig}/tkConfig.sh" ; then - ac_cv_c_tkconfig="`(cd "${with_tkconfig}"; pwd)`" - else - AC_MSG_ERROR([${with_tkconfig} directory doesn't contain tkConfig.sh]) - fi - fi - - # then check for a private Tk library - if test x"${ac_cv_c_tkconfig}" = x ; then - for i in \ - ../tk \ - `ls -dr ../tk[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \ - `ls -dr ../tk[[8-9]].[[0-9]] 2>/dev/null` \ - `ls -dr ../tk[[8-9]].[[0-9]]* 2>/dev/null` \ - ../../tk \ - `ls -dr ../../tk[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \ - `ls -dr ../../tk[[8-9]].[[0-9]] 2>/dev/null` \ - `ls -dr ../../tk[[8-9]].[[0-9]]* 2>/dev/null` \ - ../../../tk \ - `ls -dr ../../../tk[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \ - `ls -dr ../../../tk[[8-9]].[[0-9]] 2>/dev/null` \ - `ls -dr ../../../tk[[8-9]].[[0-9]]* 2>/dev/null` ; do - if test "${TEA_PLATFORM}" = "windows" \ - -a -f "$i/win/tkConfig.sh" ; then - ac_cv_c_tkconfig="`(cd $i/win; pwd)`" - break - fi - if test -f "$i/unix/tkConfig.sh" ; then - ac_cv_c_tkconfig="`(cd $i/unix; pwd)`" - break - fi - done - fi - - # on Darwin, check in Framework installation locations - if test "`uname -s`" = "Darwin" -a x"${ac_cv_c_tkconfig}" = x ; then - for i in `ls -d ~/Library/Frameworks 2>/dev/null` \ - `ls -d /Library/Frameworks 2>/dev/null` \ - `ls -d /Network/Library/Frameworks 2>/dev/null` \ - `ls -d /System/Library/Frameworks 2>/dev/null` \ - ; do - if test -f "$i/Tk.framework/tkConfig.sh" ; then - ac_cv_c_tkconfig="`(cd $i/Tk.framework; pwd)`" - break - fi - done - fi - - # check in a few common install locations - if test x"${ac_cv_c_tkconfig}" = x ; then - for i in `ls -d ${libdir} 2>/dev/null` \ - `ls -d ${exec_prefix}/lib 2>/dev/null` \ - `ls -d ${prefix}/lib 2>/dev/null` \ - `ls -d /usr/local/lib 2>/dev/null` \ - `ls -d /usr/contrib/lib 2>/dev/null` \ - `ls -d /usr/lib 2>/dev/null` \ - ; do - if test -f "$i/tkConfig.sh" ; then - ac_cv_c_tkconfig="`(cd $i; pwd)`" - break - fi - done - fi - - # TEA specific: on Windows, check in common installation locations - if test "${TEA_PLATFORM}" = "windows" \ - -a x"${ac_cv_c_tkconfig}" = x ; then - for i in `ls -d C:/Tcl/lib 2>/dev/null` \ - `ls -d C:/Progra~1/Tcl/lib 2>/dev/null` \ - ; do - if test -f "$i/tkConfig.sh" ; then - ac_cv_c_tkconfig="`(cd $i; pwd)`" - break - fi - done - fi - - # check in a few other private locations - if test x"${ac_cv_c_tkconfig}" = x ; then - for i in \ - ${srcdir}/../tk \ - `ls -dr ${srcdir}/../tk[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \ - `ls -dr ${srcdir}/../tk[[8-9]].[[0-9]] 2>/dev/null` \ - `ls -dr ${srcdir}/../tk[[8-9]].[[0-9]]* 2>/dev/null` ; do - if test "${TEA_PLATFORM}" = "windows" \ - -a -f "$i/win/tkConfig.sh" ; then - ac_cv_c_tkconfig="`(cd $i/win; pwd)`" - break - fi - if test -f "$i/unix/tkConfig.sh" ; then - ac_cv_c_tkconfig="`(cd $i/unix; pwd)`" - break - fi - done - fi - ]) - - if test x"${ac_cv_c_tkconfig}" = x ; then - TK_BIN_DIR="# no Tk configs found" - AC_MSG_ERROR([Can't find Tk configuration definitions]) - else - no_tk= - TK_BIN_DIR="${ac_cv_c_tkconfig}" - AC_MSG_RESULT([found ${TK_BIN_DIR}/tkConfig.sh]) - fi - fi -]) - -#------------------------------------------------------------------------ -# TEA_LOAD_TCLCONFIG -- -# -# Load the tclConfig.sh file -# -# Arguments: -# -# Requires the following vars to be set: -# TCL_BIN_DIR -# -# Results: -# -# Subst the following vars: -# TCL_BIN_DIR -# TCL_SRC_DIR -# TCL_LIB_FILE -# -#------------------------------------------------------------------------ - -AC_DEFUN([TEA_LOAD_TCLCONFIG], [ - AC_MSG_CHECKING([for existence of ${TCL_BIN_DIR}/tclConfig.sh]) - - if test -f "${TCL_BIN_DIR}/tclConfig.sh" ; then - AC_MSG_RESULT([loading]) - . "${TCL_BIN_DIR}/tclConfig.sh" - else - AC_MSG_RESULT([could not find ${TCL_BIN_DIR}/tclConfig.sh]) - fi - - # eval is required to do the TCL_DBGX substitution - eval "TCL_LIB_FILE=\"${TCL_LIB_FILE}\"" - eval "TCL_STUB_LIB_FILE=\"${TCL_STUB_LIB_FILE}\"" - - # If the TCL_BIN_DIR is the build directory (not the install directory), - # then set the common variable name to the value of the build variables. - # For example, the variable TCL_LIB_SPEC will be set to the value - # of TCL_BUILD_LIB_SPEC. An extension should make use of TCL_LIB_SPEC - # instead of TCL_BUILD_LIB_SPEC since it will work with both an - # installed and uninstalled version of Tcl. - if test -f "${TCL_BIN_DIR}/Makefile" ; then - TCL_LIB_SPEC="${TCL_BUILD_LIB_SPEC}" - TCL_STUB_LIB_SPEC="${TCL_BUILD_STUB_LIB_SPEC}" - TCL_STUB_LIB_PATH="${TCL_BUILD_STUB_LIB_PATH}" - elif test "`uname -s`" = "Darwin"; then - # If Tcl was built as a framework, attempt to use the libraries - # from the framework at the given location so that linking works - # against Tcl.framework installed in an arbitrary location. - case ${TCL_DEFS} in - *TCL_FRAMEWORK*) - if test -f "${TCL_BIN_DIR}/${TCL_LIB_FILE}"; then - for i in "`cd "${TCL_BIN_DIR}"; pwd`" \ - "`cd "${TCL_BIN_DIR}"/../..; pwd`"; do - if test "`basename "$i"`" = "${TCL_LIB_FILE}.framework"; then - TCL_LIB_SPEC="-F`dirname "$i" | sed -e 's/ /\\\\ /g'` -framework ${TCL_LIB_FILE}" - break - fi - done - fi - if test -f "${TCL_BIN_DIR}/${TCL_STUB_LIB_FILE}"; then - TCL_STUB_LIB_SPEC="-L`echo "${TCL_BIN_DIR}" | sed -e 's/ /\\\\ /g'` ${TCL_STUB_LIB_FLAG}" - TCL_STUB_LIB_PATH="${TCL_BIN_DIR}/${TCL_STUB_LIB_FILE}" - fi - ;; - esac - fi - - # eval is required to do the TCL_DBGX substitution - eval "TCL_LIB_FLAG=\"${TCL_LIB_FLAG}\"" - eval "TCL_LIB_SPEC=\"${TCL_LIB_SPEC}\"" - eval "TCL_STUB_LIB_FLAG=\"${TCL_STUB_LIB_FLAG}\"" - eval "TCL_STUB_LIB_SPEC=\"${TCL_STUB_LIB_SPEC}\"" - - AC_SUBST(TCL_VERSION) - AC_SUBST(TCL_PATCH_LEVEL) - AC_SUBST(TCL_BIN_DIR) - AC_SUBST(TCL_SRC_DIR) - - AC_SUBST(TCL_LIB_FILE) - AC_SUBST(TCL_LIB_FLAG) - AC_SUBST(TCL_LIB_SPEC) - - AC_SUBST(TCL_STUB_LIB_FILE) - AC_SUBST(TCL_STUB_LIB_FLAG) - AC_SUBST(TCL_STUB_LIB_SPEC) - - case "`uname -s`" in - *CYGWIN_*) - AC_MSG_CHECKING([for cygwin variant]) - case ${TCL_EXTRA_CFLAGS} in - *-mwin32*|*-mno-cygwin*) - TEA_PLATFORM="windows" - CFLAGS="$CFLAGS -mwin32" - AC_MSG_RESULT([win32]) - ;; - *) - TEA_PLATFORM="unix" - AC_MSG_RESULT([unix]) - ;; - esac - EXEEXT=".exe" - ;; - *) - ;; - esac - - # TEA specific: - AC_SUBST(TCL_LIBS) - AC_SUBST(TCL_DEFS) - AC_SUBST(TCL_EXTRA_CFLAGS) - AC_SUBST(TCL_LD_FLAGS) - AC_SUBST(TCL_SHLIB_LD_LIBS) -]) - -#------------------------------------------------------------------------ -# TEA_LOAD_TKCONFIG -- -# -# Load the tkConfig.sh file -# -# Arguments: -# -# Requires the following vars to be set: -# TK_BIN_DIR -# -# Results: -# -# Sets the following vars that should be in tkConfig.sh: -# TK_BIN_DIR -#------------------------------------------------------------------------ - -AC_DEFUN([TEA_LOAD_TKCONFIG], [ - AC_MSG_CHECKING([for existence of ${TK_BIN_DIR}/tkConfig.sh]) - - if test -f "${TK_BIN_DIR}/tkConfig.sh" ; then - AC_MSG_RESULT([loading]) - . "${TK_BIN_DIR}/tkConfig.sh" - else - AC_MSG_RESULT([could not find ${TK_BIN_DIR}/tkConfig.sh]) - fi - - # eval is required to do the TK_DBGX substitution - eval "TK_LIB_FILE=\"${TK_LIB_FILE}\"" - eval "TK_STUB_LIB_FILE=\"${TK_STUB_LIB_FILE}\"" - - # If the TK_BIN_DIR is the build directory (not the install directory), - # then set the common variable name to the value of the build variables. - # For example, the variable TK_LIB_SPEC will be set to the value - # of TK_BUILD_LIB_SPEC. An extension should make use of TK_LIB_SPEC - # instead of TK_BUILD_LIB_SPEC since it will work with both an - # installed and uninstalled version of Tcl. - if test -f "${TK_BIN_DIR}/Makefile" ; then - TK_LIB_SPEC="${TK_BUILD_LIB_SPEC}" - TK_STUB_LIB_SPEC="${TK_BUILD_STUB_LIB_SPEC}" - TK_STUB_LIB_PATH="${TK_BUILD_STUB_LIB_PATH}" - elif test "`uname -s`" = "Darwin"; then - # If Tk was built as a framework, attempt to use the libraries - # from the framework at the given location so that linking works - # against Tk.framework installed in an arbitrary location. - case ${TK_DEFS} in - *TK_FRAMEWORK*) - if test -f "${TK_BIN_DIR}/${TK_LIB_FILE}"; then - for i in "`cd "${TK_BIN_DIR}"; pwd`" \ - "`cd "${TK_BIN_DIR}"/../..; pwd`"; do - if test "`basename "$i"`" = "${TK_LIB_FILE}.framework"; then - TK_LIB_SPEC="-F`dirname "$i" | sed -e 's/ /\\\\ /g'` -framework ${TK_LIB_FILE}" - break - fi - done - fi - if test -f "${TK_BIN_DIR}/${TK_STUB_LIB_FILE}"; then - TK_STUB_LIB_SPEC="-L` echo "${TK_BIN_DIR}" | sed -e 's/ /\\\\ /g'` ${TK_STUB_LIB_FLAG}" - TK_STUB_LIB_PATH="${TK_BIN_DIR}/${TK_STUB_LIB_FILE}" - fi - ;; - esac - fi - - # eval is required to do the TK_DBGX substitution - eval "TK_LIB_FLAG=\"${TK_LIB_FLAG}\"" - eval "TK_LIB_SPEC=\"${TK_LIB_SPEC}\"" - eval "TK_STUB_LIB_FLAG=\"${TK_STUB_LIB_FLAG}\"" - eval "TK_STUB_LIB_SPEC=\"${TK_STUB_LIB_SPEC}\"" - - # TEA specific: Ensure windowingsystem is defined - if test "${TEA_PLATFORM}" = "unix" ; then - case ${TK_DEFS} in - *MAC_OSX_TK*) - AC_DEFINE(MAC_OSX_TK, 1, [Are we building against Mac OS X TkAqua?]) - TEA_WINDOWINGSYSTEM="aqua" - ;; - *) - TEA_WINDOWINGSYSTEM="x11" - ;; - esac - elif test "${TEA_PLATFORM}" = "windows" ; then - TEA_WINDOWINGSYSTEM="win32" - fi - - AC_SUBST(TK_VERSION) - AC_SUBST(TK_BIN_DIR) - AC_SUBST(TK_SRC_DIR) - - AC_SUBST(TK_LIB_FILE) - AC_SUBST(TK_LIB_FLAG) - AC_SUBST(TK_LIB_SPEC) - - AC_SUBST(TK_STUB_LIB_FILE) - AC_SUBST(TK_STUB_LIB_FLAG) - AC_SUBST(TK_STUB_LIB_SPEC) - - # TEA specific: - AC_SUBST(TK_LIBS) - AC_SUBST(TK_XINCLUDES) -]) - -#------------------------------------------------------------------------ -# TEA_PROG_TCLSH -# Determine the fully qualified path name of the tclsh executable -# in the Tcl build directory or the tclsh installed in a bin -# directory. This macro will correctly determine the name -# of the tclsh executable even if tclsh has not yet been -# built in the build directory. The tclsh found is always -# associated with a tclConfig.sh file. This tclsh should be used -# only for running extension test cases. It should never be -# or generation of files (like pkgIndex.tcl) at build time. -# -# Arguments -# none -# -# Results -# Subst's the following values: -# TCLSH_PROG -#------------------------------------------------------------------------ - -AC_DEFUN([TEA_PROG_TCLSH], [ - AC_MSG_CHECKING([for tclsh]) - if test -f "${TCL_BIN_DIR}/Makefile" ; then - # tclConfig.sh is in Tcl build directory - if test "${TEA_PLATFORM}" = "windows"; then - TCLSH_PROG="${TCL_BIN_DIR}/tclsh${TCL_MAJOR_VERSION}${TCL_MINOR_VERSION}${TCL_DBGX}${EXEEXT}" - else - TCLSH_PROG="${TCL_BIN_DIR}/tclsh" - fi - else - # tclConfig.sh is in install location - if test "${TEA_PLATFORM}" = "windows"; then - TCLSH_PROG="tclsh${TCL_MAJOR_VERSION}${TCL_MINOR_VERSION}${TCL_DBGX}${EXEEXT}" - else - TCLSH_PROG="tclsh${TCL_MAJOR_VERSION}.${TCL_MINOR_VERSION}${TCL_DBGX}" - fi - list="`ls -d ${TCL_BIN_DIR}/../bin 2>/dev/null` \ - `ls -d ${TCL_BIN_DIR}/.. 2>/dev/null` \ - `ls -d ${TCL_PREFIX}/bin 2>/dev/null`" - for i in $list ; do - if test -f "$i/${TCLSH_PROG}" ; then - REAL_TCL_BIN_DIR="`cd "$i"; pwd`/" - break - fi - done - TCLSH_PROG="${REAL_TCL_BIN_DIR}${TCLSH_PROG}" - fi - AC_MSG_RESULT([${TCLSH_PROG}]) - AC_SUBST(TCLSH_PROG) -]) - -#------------------------------------------------------------------------ -# TEA_PROG_WISH -# Determine the fully qualified path name of the wish executable -# in the Tk build directory or the wish installed in a bin -# directory. This macro will correctly determine the name -# of the wish executable even if wish has not yet been -# built in the build directory. The wish found is always -# associated with a tkConfig.sh file. This wish should be used -# only for running extension test cases. It should never be -# or generation of files (like pkgIndex.tcl) at build time. -# -# Arguments -# none -# -# Results -# Subst's the following values: -# WISH_PROG -#------------------------------------------------------------------------ - -AC_DEFUN([TEA_PROG_WISH], [ - AC_MSG_CHECKING([for wish]) - if test -f "${TK_BIN_DIR}/Makefile" ; then - # tkConfig.sh is in Tk build directory - if test "${TEA_PLATFORM}" = "windows"; then - WISH_PROG="${TK_BIN_DIR}/wish${TK_MAJOR_VERSION}${TK_MINOR_VERSION}${TK_DBGX}${EXEEXT}" - else - WISH_PROG="${TK_BIN_DIR}/wish" - fi - else - # tkConfig.sh is in install location - if test "${TEA_PLATFORM}" = "windows"; then - WISH_PROG="wish${TK_MAJOR_VERSION}${TK_MINOR_VERSION}${TK_DBGX}${EXEEXT}" - else - WISH_PROG="wish${TK_MAJOR_VERSION}.${TK_MINOR_VERSION}${TK_DBGX}" - fi - list="`ls -d ${TK_BIN_DIR}/../bin 2>/dev/null` \ - `ls -d ${TK_BIN_DIR}/.. 2>/dev/null` \ - `ls -d ${TK_PREFIX}/bin 2>/dev/null`" - for i in $list ; do - if test -f "$i/${WISH_PROG}" ; then - REAL_TK_BIN_DIR="`cd "$i"; pwd`/" - break - fi - done - WISH_PROG="${REAL_TK_BIN_DIR}${WISH_PROG}" - fi - AC_MSG_RESULT([${WISH_PROG}]) - AC_SUBST(WISH_PROG) -]) - -#------------------------------------------------------------------------ -# TEA_ENABLE_SHARED -- -# -# Allows the building of shared libraries -# -# Arguments: -# none -# -# Results: -# -# Adds the following arguments to configure: -# --enable-shared=yes|no -# -# Defines the following vars: -# STATIC_BUILD Used for building import/export libraries -# on Windows. -# -# Sets the following vars: -# SHARED_BUILD Value of 1 or 0 -#------------------------------------------------------------------------ - -AC_DEFUN([TEA_ENABLE_SHARED], [ - AC_MSG_CHECKING([how to build libraries]) - AC_ARG_ENABLE(shared, - AC_HELP_STRING([--enable-shared], - [build and link with shared libraries (default: on)]), - [tcl_ok=$enableval], [tcl_ok=yes]) - - if test "${enable_shared+set}" = set; then - enableval="$enable_shared" - tcl_ok=$enableval - else - tcl_ok=yes - fi - - if test "$tcl_ok" = "yes" ; then - AC_MSG_RESULT([shared]) - SHARED_BUILD=1 - else - AC_MSG_RESULT([static]) - SHARED_BUILD=0 - AC_DEFINE(STATIC_BUILD, 1, [Is this a static build?]) - fi - AC_SUBST(SHARED_BUILD) -]) - -#------------------------------------------------------------------------ -# TEA_ENABLE_THREADS -- -# -# Specify if thread support should be enabled. If "yes" is specified -# as an arg (optional), threads are enabled by default, "no" means -# threads are disabled. "yes" is the default. -# -# TCL_THREADS is checked so that if you are compiling an extension -# against a threaded core, your extension must be compiled threaded -# as well. -# -# Note that it is legal to have a thread enabled extension run in a -# threaded or non-threaded Tcl core, but a non-threaded extension may -# only run in a non-threaded Tcl core. -# -# Arguments: -# none -# -# Results: -# -# Adds the following arguments to configure: -# --enable-threads -# -# Sets the following vars: -# THREADS_LIBS Thread library(s) -# -# Defines the following vars: -# TCL_THREADS -# _REENTRANT -# _THREAD_SAFE -# -#------------------------------------------------------------------------ - -AC_DEFUN([TEA_ENABLE_THREADS], [ - AC_ARG_ENABLE(threads, - AC_HELP_STRING([--enable-threads], - [build with threads]), - [tcl_ok=$enableval], [tcl_ok=yes]) - - if test "${enable_threads+set}" = set; then - enableval="$enable_threads" - tcl_ok=$enableval - else - tcl_ok=yes - fi - - if test "$tcl_ok" = "yes" -o "${TCL_THREADS}" = 1; then - TCL_THREADS=1 - - if test "${TEA_PLATFORM}" != "windows" ; then - # We are always OK on Windows, so check what this platform wants: - - # USE_THREAD_ALLOC tells us to try the special thread-based - # allocator that significantly reduces lock contention - AC_DEFINE(USE_THREAD_ALLOC, 1, - [Do we want to use the threaded memory allocator?]) - AC_DEFINE(_REENTRANT, 1, [Do we want the reentrant OS API?]) - if test "`uname -s`" = "SunOS" ; then - AC_DEFINE(_POSIX_PTHREAD_SEMANTICS, 1, - [Do we really want to follow the standard? Yes we do!]) - fi - AC_DEFINE(_THREAD_SAFE, 1, [Do we want the thread-safe OS API?]) - AC_CHECK_LIB(pthread,pthread_mutex_init,tcl_ok=yes,tcl_ok=no) - if test "$tcl_ok" = "no"; then - # Check a little harder for __pthread_mutex_init in the same - # library, as some systems hide it there until pthread.h is - # defined. We could alternatively do an AC_TRY_COMPILE with - # pthread.h, but that will work with libpthread really doesn't - # exist, like AIX 4.2. [Bug: 4359] - AC_CHECK_LIB(pthread, __pthread_mutex_init, - tcl_ok=yes, tcl_ok=no) - fi - - if test "$tcl_ok" = "yes"; then - # The space is needed - THREADS_LIBS=" -lpthread" - else - AC_CHECK_LIB(pthreads, pthread_mutex_init, - tcl_ok=yes, tcl_ok=no) - if test "$tcl_ok" = "yes"; then - # The space is needed - THREADS_LIBS=" -lpthreads" - else - AC_CHECK_LIB(c, pthread_mutex_init, - tcl_ok=yes, tcl_ok=no) - if test "$tcl_ok" = "no"; then - AC_CHECK_LIB(c_r, pthread_mutex_init, - tcl_ok=yes, tcl_ok=no) - if test "$tcl_ok" = "yes"; then - # The space is needed - THREADS_LIBS=" -pthread" - else - TCL_THREADS=0 - AC_MSG_WARN([Do not know how to find pthread lib on your system - thread support disabled]) - fi - fi - fi - fi - fi - else - TCL_THREADS=0 - fi - # Do checking message here to not mess up interleaved configure output - AC_MSG_CHECKING([for building with threads]) - if test "${TCL_THREADS}" = 1; then - AC_DEFINE(TCL_THREADS, 1, [Are we building with threads enabled?]) - AC_MSG_RESULT([yes (default)]) - else - AC_MSG_RESULT([no]) - fi - # TCL_THREADS sanity checking. See if our request for building with - # threads is the same as the way Tcl was built. If not, warn the user. - case ${TCL_DEFS} in - *THREADS=1*) - if test "${TCL_THREADS}" = "0"; then - AC_MSG_WARN([ - Building ${PACKAGE_NAME} without threads enabled, but building against Tcl - that IS thread-enabled. It is recommended to use --enable-threads.]) - fi - ;; - *) - if test "${TCL_THREADS}" = "1"; then - AC_MSG_WARN([ - --enable-threads requested, but building against a Tcl that is NOT - thread-enabled. This is an OK configuration that will also run in - a thread-enabled core.]) - fi - ;; - esac - AC_SUBST(TCL_THREADS) -]) - -#------------------------------------------------------------------------ -# TEA_ENABLE_SYMBOLS -- -# -# Specify if debugging symbols should be used. -# Memory (TCL_MEM_DEBUG) debugging can also be enabled. -# -# Arguments: -# none -# -# TEA varies from core Tcl in that C|LDFLAGS_DEFAULT receives -# the value of C|LDFLAGS_OPTIMIZE|DEBUG already substituted. -# Requires the following vars to be set in the Makefile: -# CFLAGS_DEFAULT -# LDFLAGS_DEFAULT -# -# Results: -# -# Adds the following arguments to configure: -# --enable-symbols -# -# Defines the following vars: -# CFLAGS_DEFAULT Sets to $(CFLAGS_DEBUG) if true -# Sets to $(CFLAGS_OPTIMIZE) if false -# LDFLAGS_DEFAULT Sets to $(LDFLAGS_DEBUG) if true -# Sets to $(LDFLAGS_OPTIMIZE) if false -# DBGX Formerly used as debug library extension; -# always blank now. -# -#------------------------------------------------------------------------ - -AC_DEFUN([TEA_ENABLE_SYMBOLS], [ - dnl TEA specific: Make sure we are initialized - AC_REQUIRE([TEA_CONFIG_CFLAGS]) - AC_MSG_CHECKING([for build with symbols]) - AC_ARG_ENABLE(symbols, - AC_HELP_STRING([--enable-symbols], - [build with debugging symbols (default: off)]), - [tcl_ok=$enableval], [tcl_ok=no]) - DBGX="" - if test "$tcl_ok" = "no"; then - CFLAGS_DEFAULT="${CFLAGS_OPTIMIZE}" - LDFLAGS_DEFAULT="${LDFLAGS_OPTIMIZE}" - AC_MSG_RESULT([no]) - else - CFLAGS_DEFAULT="${CFLAGS_DEBUG}" - LDFLAGS_DEFAULT="${LDFLAGS_DEBUG}" - if test "$tcl_ok" = "yes"; then - AC_MSG_RESULT([yes (standard debugging)]) - fi - fi - # TEA specific: - if test "${TEA_PLATFORM}" != "windows" ; then - LDFLAGS_DEFAULT="${LDFLAGS}" - fi - AC_SUBST(CFLAGS_DEFAULT) - AC_SUBST(LDFLAGS_DEFAULT) - AC_SUBST(TCL_DBGX) - - if test "$tcl_ok" = "mem" -o "$tcl_ok" = "all"; then - AC_DEFINE(TCL_MEM_DEBUG, 1, [Is memory debugging enabled?]) - fi - - if test "$tcl_ok" != "yes" -a "$tcl_ok" != "no"; then - if test "$tcl_ok" = "all"; then - AC_MSG_RESULT([enabled symbols mem debugging]) - else - AC_MSG_RESULT([enabled $tcl_ok debugging]) - fi - fi -]) - -#------------------------------------------------------------------------ -# TEA_ENABLE_LANGINFO -- -# -# Allows use of modern nl_langinfo check for better l10n. -# This is only relevant for Unix. -# -# Arguments: -# none -# -# Results: -# -# Adds the following arguments to configure: -# --enable-langinfo=yes|no (default is yes) -# -# Defines the following vars: -# HAVE_LANGINFO Triggers use of nl_langinfo if defined. -# -#------------------------------------------------------------------------ - -AC_DEFUN([TEA_ENABLE_LANGINFO], [ - AC_ARG_ENABLE(langinfo, - AC_HELP_STRING([--enable-langinfo], - [use nl_langinfo if possible to determine encoding at startup, otherwise use old heuristic (default: on)]), - [langinfo_ok=$enableval], [langinfo_ok=yes]) - - HAVE_LANGINFO=0 - if test "$langinfo_ok" = "yes"; then - AC_CHECK_HEADER(langinfo.h,[langinfo_ok=yes],[langinfo_ok=no]) - fi - AC_MSG_CHECKING([whether to use nl_langinfo]) - if test "$langinfo_ok" = "yes"; then - AC_CACHE_VAL(tcl_cv_langinfo_h, [ - AC_TRY_COMPILE([#include ], [nl_langinfo(CODESET);], - [tcl_cv_langinfo_h=yes],[tcl_cv_langinfo_h=no])]) - AC_MSG_RESULT([$tcl_cv_langinfo_h]) - if test $tcl_cv_langinfo_h = yes; then - AC_DEFINE(HAVE_LANGINFO, 1, [Do we have nl_langinfo()?]) - fi - else - AC_MSG_RESULT([$langinfo_ok]) - fi -]) - -#-------------------------------------------------------------------- -# TEA_CONFIG_SYSTEM -# -# Determine what the system is (some things cannot be easily checked -# on a feature-driven basis, alas). This can usually be done via the -# "uname" command, but there are a few systems, like Next, where -# this doesn't work. -# -# Arguments: -# none -# -# Results: -# Defines the following var: -# -# system - System/platform/version identification code. -# -#-------------------------------------------------------------------- - -AC_DEFUN([TEA_CONFIG_SYSTEM], [ - AC_CACHE_CHECK([system version], tcl_cv_sys_version, [ - # TEA specific: - if test "${TEA_PLATFORM}" = "windows" ; then - tcl_cv_sys_version=windows - elif test -f /usr/lib/NextStep/software_version; then - tcl_cv_sys_version=NEXTSTEP-`awk '/3/,/3/' /usr/lib/NextStep/software_version` - else - tcl_cv_sys_version=`uname -s`-`uname -r` - if test "$?" -ne 0 ; then - AC_MSG_WARN([can't find uname command]) - tcl_cv_sys_version=unknown - else - # Special check for weird MP-RAS system (uname returns weird - # results, and the version is kept in special file). - - if test -r /etc/.relid -a "X`uname -n`" = "X`uname -s`" ; then - tcl_cv_sys_version=MP-RAS-`awk '{print $[3]}' /etc/.relid` - fi - if test "`uname -s`" = "AIX" ; then - tcl_cv_sys_version=AIX-`uname -v`.`uname -r` - fi - fi - fi - ]) - system=$tcl_cv_sys_version -]) - -#-------------------------------------------------------------------- -# TEA_CONFIG_CFLAGS -# -# Try to determine the proper flags to pass to the compiler -# for building shared libraries and other such nonsense. -# -# Arguments: -# none -# -# Results: -# -# Defines and substitutes the following vars: -# -# DL_OBJS - Name of the object file that implements dynamic -# loading for Tcl on this system. -# DL_LIBS - Library file(s) to include in tclsh and other base -# applications in order for the "load" command to work. -# LDFLAGS - Flags to pass to the compiler when linking object -# files into an executable application binary such -# as tclsh. -# LD_SEARCH_FLAGS-Flags to pass to ld, such as "-R /usr/local/tcl/lib", -# that tell the run-time dynamic linker where to look -# for shared libraries such as libtcl.so. Depends on -# the variable LIB_RUNTIME_DIR in the Makefile. Could -# be the same as CC_SEARCH_FLAGS if ${CC} is used to link. -# CC_SEARCH_FLAGS-Flags to pass to ${CC}, such as "-Wl,-rpath,/usr/local/tcl/lib", -# that tell the run-time dynamic linker where to look -# for shared libraries such as libtcl.so. Depends on -# the variable LIB_RUNTIME_DIR in the Makefile. -# SHLIB_CFLAGS - Flags to pass to cc when compiling the components -# of a shared library (may request position-independent -# code, among other things). -# SHLIB_LD - Base command to use for combining object files -# into a shared library. -# SHLIB_LD_LIBS - Dependent libraries for the linker to scan when -# creating shared libraries. This symbol typically -# goes at the end of the "ld" commands that build -# shared libraries. The value of the symbol is -# "${LIBS}" if all of the dependent libraries should -# be specified when creating a shared library. If -# dependent libraries should not be specified (as on -# SunOS 4.x, where they cause the link to fail, or in -# general if Tcl and Tk aren't themselves shared -# libraries), then this symbol has an empty string -# as its value. -# SHLIB_SUFFIX - Suffix to use for the names of dynamically loadable -# extensions. An empty string means we don't know how -# to use shared libraries on this platform. -# LIB_SUFFIX - Specifies everything that comes after the "libfoo" -# in a static or shared library name, using the $VERSION variable -# to put the version in the right place. This is used -# by platforms that need non-standard library names. -# Examples: ${VERSION}.so.1.1 on NetBSD, since it needs -# to have a version after the .so, and ${VERSION}.a -# on AIX, since a shared library needs to have -# a .a extension whereas shared objects for loadable -# extensions have a .so extension. Defaults to -# ${VERSION}${SHLIB_SUFFIX}. -# CFLAGS_DEBUG - -# Flags used when running the compiler in debug mode -# CFLAGS_OPTIMIZE - -# Flags used when running the compiler in optimize mode -# CFLAGS - Additional CFLAGS added as necessary (usually 64-bit) -# -#-------------------------------------------------------------------- - -AC_DEFUN([TEA_CONFIG_CFLAGS], [ - dnl TEA specific: Make sure we are initialized - AC_REQUIRE([TEA_INIT]) - - # Step 0.a: Enable 64 bit support? - - AC_MSG_CHECKING([if 64bit support is requested]) - AC_ARG_ENABLE(64bit, - AC_HELP_STRING([--enable-64bit], - [enable 64bit support (default: off)]), - [do64bit=$enableval], [do64bit=no]) - AC_MSG_RESULT([$do64bit]) - - # Step 0.b: Enable Solaris 64 bit VIS support? - - AC_MSG_CHECKING([if 64bit Sparc VIS support is requested]) - AC_ARG_ENABLE(64bit-vis, - AC_HELP_STRING([--enable-64bit-vis], - [enable 64bit Sparc VIS support (default: off)]), - [do64bitVIS=$enableval], [do64bitVIS=no]) - AC_MSG_RESULT([$do64bitVIS]) - # Force 64bit on with VIS - AS_IF([test "$do64bitVIS" = "yes"], [do64bit=yes]) - - # Step 0.c: Check if visibility support is available. Do this here so - # that platform specific alternatives can be used below if this fails. - - AC_CACHE_CHECK([if compiler supports visibility "hidden"], - tcl_cv_cc_visibility_hidden, [ - hold_cflags=$CFLAGS; CFLAGS="$CFLAGS -Werror" - AC_TRY_LINK([ - extern __attribute__((__visibility__("hidden"))) void f(void); - void f(void) {}], [f();], tcl_cv_cc_visibility_hidden=yes, - tcl_cv_cc_visibility_hidden=no) - CFLAGS=$hold_cflags]) - AS_IF([test $tcl_cv_cc_visibility_hidden = yes], [ - AC_DEFINE(MODULE_SCOPE, - [extern __attribute__((__visibility__("hidden")))], - [Compiler support for module scope symbols]) - ]) - - # Step 0.d: Disable -rpath support? - - AC_MSG_CHECKING([if rpath support is requested]) - AC_ARG_ENABLE(rpath, - AC_HELP_STRING([--disable-rpath], - [disable rpath support (default: on)]), - [doRpath=$enableval], [doRpath=yes]) - AC_MSG_RESULT([$doRpath]) - - # TEA specific: Cross-compiling options for Windows/CE builds? - - AS_IF([test "${TEA_PLATFORM}" = windows], [ - AC_MSG_CHECKING([if Windows/CE build is requested]) - AC_ARG_ENABLE(wince, - AC_HELP_STRING([--enable-wince], - [enable Win/CE support (where applicable)]), - [doWince=$enableval], [doWince=no]) - AC_MSG_RESULT([$doWince]) - ]) - - # Step 1: set the variable "system" to hold the name and version number - # for the system. - - TEA_CONFIG_SYSTEM - - # Step 2: check for existence of -ldl library. This is needed because - # Linux can use either -ldl or -ldld for dynamic loading. - - AC_CHECK_LIB(dl, dlopen, have_dl=yes, have_dl=no) - - # Require ranlib early so we can override it in special cases below. - - AC_REQUIRE([AC_PROG_RANLIB]) - - # Step 3: set configuration options based on system name and version. - # This is similar to Tcl's unix/tcl.m4 except that we've added a - # "windows" case. - - do64bit_ok=no - LDFLAGS_ORIG="$LDFLAGS" - # When ld needs options to work in 64-bit mode, put them in - # LDFLAGS_ARCH so they eventually end up in LDFLAGS even if [load] - # is disabled by the user. [Bug 1016796] - LDFLAGS_ARCH="" - UNSHARED_LIB_SUFFIX="" - # TEA specific: use PACKAGE_VERSION instead of VERSION - TCL_TRIM_DOTS='`echo ${PACKAGE_VERSION} | tr -d .`' - ECHO_VERSION='`echo ${PACKAGE_VERSION}`' - TCL_LIB_VERSIONS_OK=ok - CFLAGS_DEBUG=-g - CFLAGS_OPTIMIZE=-O - AS_IF([test "$GCC" = yes], [ - # TEA specific: - CFLAGS_OPTIMIZE=-O2 - CFLAGS_WARNING="-Wall" - ], [CFLAGS_WARNING=""]) -dnl FIXME: Replace AC_CHECK_PROG with AC_CHECK_TOOL once cross compiling is fixed. -dnl AC_CHECK_TOOL(AR, ar) - AC_CHECK_PROG(AR, ar, ar) - STLIB_LD='${AR} cr' - LD_LIBRARY_PATH_VAR="LD_LIBRARY_PATH" - AS_IF([test "x$SHLIB_VERSION" = x],[SHLIB_VERSION="1.0"]) - case $system in - # TEA specific: - windows) - # This is a 2-stage check to make sure we have the 64-bit SDK - # We have to know where the SDK is installed. - # This magic is based on MS Platform SDK for Win2003 SP1 - hobbs - # MACHINE is IX86 for LINK, but this is used by the manifest, - # which requires x86|amd64|ia64. - MACHINE="X86" - if test "$do64bit" != "no" ; then - if test "x${MSSDK}x" = "xx" ; then - MSSDK="C:/Progra~1/Microsoft Platform SDK" - fi - MSSDK=`echo "$MSSDK" | sed -e 's!\\\!/!g'` - PATH64="" - case "$do64bit" in - amd64|x64|yes) - MACHINE="AMD64" ; # default to AMD64 64-bit build - PATH64="${MSSDK}/Bin/Win64/x86/AMD64" - ;; - ia64) - MACHINE="IA64" - PATH64="${MSSDK}/Bin/Win64" - ;; - esac - if test ! -d "${PATH64}" ; then - AC_MSG_WARN([Could not find 64-bit $MACHINE SDK to enable 64bit mode]) - AC_MSG_WARN([Ensure latest Platform SDK is installed]) - do64bit="no" - else - AC_MSG_RESULT([ Using 64-bit $MACHINE mode]) - do64bit_ok="yes" - fi - fi - - if test "$doWince" != "no" ; then - if test "$do64bit" != "no" ; then - AC_MSG_ERROR([Windows/CE and 64-bit builds incompatible]) - fi - if test "$GCC" = "yes" ; then - AC_MSG_ERROR([Windows/CE and GCC builds incompatible]) - fi - TEA_PATH_CELIB - # Set defaults for common evc4/PPC2003 setup - # Currently Tcl requires 300+, possibly 420+ for sockets - CEVERSION=420; # could be 211 300 301 400 420 ... - TARGETCPU=ARMV4; # could be ARMV4 ARM MIPS SH3 X86 ... - ARCH=ARM; # could be ARM MIPS X86EM ... - PLATFORM="Pocket PC 2003"; # or "Pocket PC 2002" - if test "$doWince" != "yes"; then - # If !yes then the user specified something - # Reset ARCH to allow user to skip specifying it - ARCH= - eval `echo $doWince | awk -F, '{ \ - if (length([$]1)) { printf "CEVERSION=\"%s\"\n", [$]1; \ - if ([$]1 < 400) { printf "PLATFORM=\"Pocket PC 2002\"\n" } }; \ - if (length([$]2)) { printf "TARGETCPU=\"%s\"\n", toupper([$]2) }; \ - if (length([$]3)) { printf "ARCH=\"%s\"\n", toupper([$]3) }; \ - if (length([$]4)) { printf "PLATFORM=\"%s\"\n", [$]4 }; \ - }'` - if test "x${ARCH}" = "x" ; then - ARCH=$TARGETCPU; - fi - fi - OSVERSION=WCE$CEVERSION; - if test "x${WCEROOT}" = "x" ; then - WCEROOT="C:/Program Files/Microsoft eMbedded C++ 4.0" - if test ! -d "${WCEROOT}" ; then - WCEROOT="C:/Program Files/Microsoft eMbedded Tools" - fi - fi - if test "x${SDKROOT}" = "x" ; then - SDKROOT="C:/Program Files/Windows CE Tools" - if test ! -d "${SDKROOT}" ; then - SDKROOT="C:/Windows CE Tools" - fi - fi - WCEROOT=`echo "$WCEROOT" | sed -e 's!\\\!/!g'` - SDKROOT=`echo "$SDKROOT" | sed -e 's!\\\!/!g'` - if test ! -d "${SDKROOT}/${OSVERSION}/${PLATFORM}/Lib/${TARGETCPU}" \ - -o ! -d "${WCEROOT}/EVC/${OSVERSION}/bin"; then - AC_MSG_ERROR([could not find PocketPC SDK or target compiler to enable WinCE mode [$CEVERSION,$TARGETCPU,$ARCH,$PLATFORM]]) - doWince="no" - else - # We could PATH_NOSPACE these, but that's not important, - # as long as we quote them when used. - CEINCLUDE="${SDKROOT}/${OSVERSION}/${PLATFORM}/include" - if test -d "${CEINCLUDE}/${TARGETCPU}" ; then - CEINCLUDE="${CEINCLUDE}/${TARGETCPU}" - fi - CELIBPATH="${SDKROOT}/${OSVERSION}/${PLATFORM}/Lib/${TARGETCPU}" - fi - fi - - if test "$GCC" != "yes" ; then - if test "${SHARED_BUILD}" = "0" ; then - runtime=-MT - else - runtime=-MD - fi - - if test "$do64bit" != "no" ; then - # All this magic is necessary for the Win64 SDK RC1 - hobbs - CC="\"${PATH64}/cl.exe\"" - CFLAGS="${CFLAGS} -I\"${MSSDK}/Include\" -I\"${MSSDK}/Include/crt\" -I\"${MSSDK}/Include/crt/sys\"" - RC="\"${MSSDK}/bin/rc.exe\"" - lflags="-nologo -MACHINE:${MACHINE} -LIBPATH:\"${MSSDK}/Lib/${MACHINE}\"" - LINKBIN="\"${PATH64}/link.exe\"" - CFLAGS_DEBUG="-nologo -Zi -Od -W3 ${runtime}d" - CFLAGS_OPTIMIZE="-nologo -O2 -W2 ${runtime}" - # Avoid 'unresolved external symbol __security_cookie' - # errors, c.f. http://support.microsoft.com/?id=894573 - TEA_ADD_LIBS([bufferoverflowU.lib]) - elif test "$doWince" != "no" ; then - CEBINROOT="${WCEROOT}/EVC/${OSVERSION}/bin" - if test "${TARGETCPU}" = "X86"; then - CC="\"${CEBINROOT}/cl.exe\"" - else - CC="\"${CEBINROOT}/cl${ARCH}.exe\"" - fi - CFLAGS="$CFLAGS -I\"${CELIB_DIR}/inc\" -I\"${CEINCLUDE}\"" - RC="\"${WCEROOT}/Common/EVC/bin/rc.exe\"" - arch=`echo ${ARCH} | awk '{print tolower([$]0)}'` - defs="${ARCH} _${ARCH}_ ${arch} PALM_SIZE _MT _WINDOWS" - if test "${SHARED_BUILD}" = "1" ; then - # Static CE builds require static celib as well - defs="${defs} _DLL" - fi - for i in $defs ; do - AC_DEFINE_UNQUOTED($i, 1, [WinCE def ]$i) - done - AC_DEFINE_UNQUOTED(_WIN32_WCE, $CEVERSION, [_WIN32_WCE version]) - AC_DEFINE_UNQUOTED(UNDER_CE, $CEVERSION, [UNDER_CE version]) - CFLAGS_DEBUG="-nologo -Zi -Od" - CFLAGS_OPTIMIZE="-nologo -Ox" - lversion=`echo ${CEVERSION} | sed -e 's/\(.\)\(..\)/\1\.\2/'` - lflags="-MACHINE:${ARCH} -LIBPATH:\"${CELIBPATH}\" -subsystem:windowsce,${lversion} -nologo" - LINKBIN="\"${CEBINROOT}/link.exe\"" - AC_SUBST(CELIB_DIR) - else - RC="rc" - lflags="-nologo" - LINKBIN="link" - CFLAGS_DEBUG="-nologo -Z7 -Od -W3 -WX ${runtime}d" - CFLAGS_OPTIMIZE="-nologo -O2 -W2 ${runtime}" - fi - fi - - if test "$GCC" = "yes"; then - # mingw gcc mode - RC="windres" - CFLAGS_DEBUG="-g" - CFLAGS_OPTIMIZE="-O2 -fomit-frame-pointer" - SHLIB_LD="$CC -shared" - UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.a' - LDFLAGS_CONSOLE="-wl,--subsystem,console ${lflags}" - LDFLAGS_WINDOW="-wl,--subsystem,windows ${lflags}" - else - SHLIB_LD="${LINKBIN} -dll ${lflags}" - # link -lib only works when -lib is the first arg - STLIB_LD="${LINKBIN} -lib ${lflags}" - UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.lib' - PATHTYPE=-w - # For information on what debugtype is most useful, see: - # http://msdn.microsoft.com/library/en-us/dnvc60/html/gendepdebug.asp - # and also - # http://msdn2.microsoft.com/en-us/library/y0zzbyt4%28VS.80%29.aspx - # This essentially turns it all on. - LDFLAGS_DEBUG="-debug -debugtype:cv" - LDFLAGS_OPTIMIZE="-release" - if test "$doWince" != "no" ; then - LDFLAGS_CONSOLE="-link ${lflags}" - LDFLAGS_WINDOW=${LDFLAGS_CONSOLE} - else - LDFLAGS_CONSOLE="-link -subsystem:console ${lflags}" - LDFLAGS_WINDOW="-link -subsystem:windows ${lflags}" - fi - fi - - SHLIB_LD_LIBS='${LIBS}' - SHLIB_SUFFIX=".dll" - SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.dll' - - TCL_LIB_VERSIONS_OK=nodots - # Bogus to avoid getting this turned off - DL_OBJS="tclLoadNone.obj" - ;; - AIX-*) - AS_IF([test "${TCL_THREADS}" = "1" -a "$GCC" != "yes"], [ - # AIX requires the _r compiler when gcc isn't being used - case "${CC}" in - *_r|*_r\ *) - # ok ... - ;; - *) - # Make sure only first arg gets _r - CC=`echo "$CC" | sed -e 's/^\([[^ ]]*\)/\1_r/'` - ;; - esac - AC_MSG_RESULT([Using $CC for compiling with threads]) - ]) - LIBS="$LIBS -lc" - SHLIB_CFLAGS="" - SHLIB_LD_LIBS='${LIBS}' - SHLIB_SUFFIX=".so" - - DL_OBJS="tclLoadDl.o" - LD_LIBRARY_PATH_VAR="LIBPATH" - - # Check to enable 64-bit flags for compiler/linker - AS_IF([test "$do64bit" = yes], [ - AS_IF([test "$GCC" = yes], [ - AC_MSG_WARN([64bit mode not supported with GCC on $system]) - ], [ - do64bit_ok=yes - CFLAGS="$CFLAGS -q64" - LDFLAGS_ARCH="-q64" - RANLIB="${RANLIB} -X64" - AR="${AR} -X64" - SHLIB_LD_FLAGS="-b64" - ]) - ]) - - AS_IF([test "`uname -m`" = ia64], [ - # AIX-5 uses ELF style dynamic libraries on IA-64, but not PPC - SHLIB_LD="/usr/ccs/bin/ld -G -z text" - # AIX-5 has dl* in libc.so - DL_LIBS="" - AS_IF([test "$GCC" = yes], [ - CC_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}' - ], [ - CC_SEARCH_FLAGS='-R${LIB_RUNTIME_DIR}' - ]) - LD_SEARCH_FLAGS='-R ${LIB_RUNTIME_DIR}' - ], [ - AS_IF([test "$GCC" = yes], [ - SHLIB_LD='${CC} -shared -Wl,-bexpall' - ], [ - SHLIB_LD="/bin/ld -bhalt:4 -bM:SRE -bexpall -H512 -T512 -bnoentry" - LDFLAGS="$LDFLAGS -brtl" - ]) - SHLIB_LD="${SHLIB_LD} ${SHLIB_LD_FLAGS}" - DL_LIBS="-ldl" - CC_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}' - LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} - ]) - ;; - BeOS*) - SHLIB_CFLAGS="-fPIC" - SHLIB_LD='${CC} -nostart' - SHLIB_LD_LIBS='${LIBS}' - SHLIB_SUFFIX=".so" - DL_OBJS="tclLoadDl.o" - DL_LIBS="-ldl" - - #----------------------------------------------------------- - # Check for inet_ntoa in -lbind, for BeOS (which also needs - # -lsocket, even if the network functions are in -lnet which - # is always linked to, for compatibility. - #----------------------------------------------------------- - AC_CHECK_LIB(bind, inet_ntoa, [LIBS="$LIBS -lbind -lsocket"]) - ;; - BSD/OS-4.*) - SHLIB_CFLAGS="-export-dynamic -fPIC" - SHLIB_LD='${CC} -shared' - SHLIB_LD_LIBS='${LIBS}' - SHLIB_SUFFIX=".so" - DL_OBJS="tclLoadDl.o" - DL_LIBS="-ldl" - LDFLAGS="$LDFLAGS -export-dynamic" - CC_SEARCH_FLAGS="" - LD_SEARCH_FLAGS="" - ;; - CYGWIN_*) - SHLIB_CFLAGS="" - SHLIB_LD='${CC} -shared' - SHLIB_LD_LIBS='${LIBS}' - SHLIB_SUFFIX=".dll" - EXE_SUFFIX=".exe" - DL_OBJS="tclLoadDl.o" - DL_LIBS="-ldl" - CC_SEARCH_FLAGS="" - LD_SEARCH_FLAGS="" - ;; - Haiku*) - LDFLAGS="$LDFLAGS -Wl,--export-dynamic" - SHLIB_CFLAGS="-fPIC" - SHLIB_LD_LIBS='${LIBS}' - SHLIB_SUFFIX=".so" - SHLIB_LD='${CC} -shared ${CFLAGS} ${LDFLAGS}' - DL_OBJS="tclLoadDl.o" - DL_LIBS="-lroot" - AC_CHECK_LIB(network, inet_ntoa, [LIBS="$LIBS -lnetwork"]) - ;; - HP-UX-*.11.*) - # Use updated header definitions where possible - AC_DEFINE(_XOPEN_SOURCE_EXTENDED, 1, [Do we want to use the XOPEN network library?]) - # TEA specific: Needed by Tcl, but not most extensions - #AC_DEFINE(_XOPEN_SOURCE, 1, [Do we want to use the XOPEN network library?]) - #LIBS="$LIBS -lxnet" # Use the XOPEN network library - - AS_IF([test "`uname -m`" = ia64], [ - SHLIB_SUFFIX=".so" - # Use newer C++ library for C++ extensions - #if test "$GCC" != "yes" ; then - # CPPFLAGS="-AA" - #fi - ], [ - SHLIB_SUFFIX=".sl" - ]) - AC_CHECK_LIB(dld, shl_load, tcl_ok=yes, tcl_ok=no) - AS_IF([test "$tcl_ok" = yes], [ - SHLIB_LD_LIBS='${LIBS}' - DL_OBJS="tclLoadShl.o" - DL_LIBS="-ldld" - LDFLAGS="$LDFLAGS -E" - CC_SEARCH_FLAGS='-Wl,+s,+b,${LIB_RUNTIME_DIR}:.' - LD_SEARCH_FLAGS='+s +b ${LIB_RUNTIME_DIR}:.' - LD_LIBRARY_PATH_VAR="SHLIB_PATH" - ]) - AS_IF([test "$GCC" = yes], [ - SHLIB_LD='${CC} -shared' - LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} - ], [ - CFLAGS="$CFLAGS -z" - # Users may want PA-RISC 1.1/2.0 portable code - needs HP cc - #CFLAGS="$CFLAGS +DAportable" - SHLIB_CFLAGS="+z" - SHLIB_LD="ld -b" - ]) - - # Check to enable 64-bit flags for compiler/linker - AS_IF([test "$do64bit" = "yes"], [ - AS_IF([test "$GCC" = yes], [ - case `${CC} -dumpmachine` in - hppa64*) - # 64-bit gcc in use. Fix flags for GNU ld. - do64bit_ok=yes - SHLIB_LD='${CC} -shared' - SHLIB_LD_LIBS='${LIBS}' - AS_IF([test $doRpath = yes], [ - CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}']) - LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} - ;; - *) - AC_MSG_WARN([64bit mode not supported with GCC on $system]) - ;; - esac - ], [ - do64bit_ok=yes - CFLAGS="$CFLAGS +DD64" - LDFLAGS_ARCH="+DD64" - ]) - ]) ;; - IRIX-6.*) - SHLIB_CFLAGS="" - SHLIB_LD="ld -n32 -shared -rdata_shared" - SHLIB_LD_LIBS='${LIBS}' - SHLIB_SUFFIX=".so" - DL_OBJS="tclLoadDl.o" - DL_LIBS="" - AS_IF([test $doRpath = yes], [ - CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' - LD_SEARCH_FLAGS='-rpath ${LIB_RUNTIME_DIR}']) - AS_IF([test "$GCC" = yes], [ - CFLAGS="$CFLAGS -mabi=n32" - LDFLAGS="$LDFLAGS -mabi=n32" - ], [ - case $system in - IRIX-6.3) - # Use to build 6.2 compatible binaries on 6.3. - CFLAGS="$CFLAGS -n32 -D_OLD_TERMIOS" - ;; - *) - CFLAGS="$CFLAGS -n32" - ;; - esac - LDFLAGS="$LDFLAGS -n32" - ]) - ;; - IRIX64-6.*) - SHLIB_CFLAGS="" - SHLIB_LD="ld -n32 -shared -rdata_shared" - SHLIB_LD_LIBS='${LIBS}' - SHLIB_SUFFIX=".so" - DL_OBJS="tclLoadDl.o" - DL_LIBS="" - AS_IF([test $doRpath = yes], [ - CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' - LD_SEARCH_FLAGS='-rpath ${LIB_RUNTIME_DIR}']) - - # Check to enable 64-bit flags for compiler/linker - - AS_IF([test "$do64bit" = yes], [ - AS_IF([test "$GCC" = yes], [ - AC_MSG_WARN([64bit mode not supported by gcc]) - ], [ - do64bit_ok=yes - SHLIB_LD="ld -64 -shared -rdata_shared" - CFLAGS="$CFLAGS -64" - LDFLAGS_ARCH="-64" - ]) - ]) - ;; - Linux*) - SHLIB_CFLAGS="-fPIC" - SHLIB_LD_LIBS='${LIBS}' - SHLIB_SUFFIX=".so" - - # TEA specific: - CFLAGS_OPTIMIZE="-O2 -fomit-frame-pointer" - # egcs-2.91.66 on Redhat Linux 6.0 generates lots of warnings - # when you inline the string and math operations. Turn this off to - # get rid of the warnings. - #CFLAGS_OPTIMIZE="${CFLAGS_OPTIMIZE} -D__NO_STRING_INLINES -D__NO_MATH_INLINES" - - # TEA specific: use LDFLAGS_DEFAULT instead of LDFLAGS - SHLIB_LD='${CC} -shared ${CFLAGS} ${LDFLAGS_DEFAULT}' - DL_OBJS="tclLoadDl.o" - DL_LIBS="-ldl" - LDFLAGS="$LDFLAGS -Wl,--export-dynamic" - AS_IF([test $doRpath = yes], [ - CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}']) - LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} - AS_IF([test "`uname -m`" = "alpha"], [CFLAGS="$CFLAGS -mieee"]) - AS_IF([test $do64bit = yes], [ - AC_CACHE_CHECK([if compiler accepts -m64 flag], tcl_cv_cc_m64, [ - hold_cflags=$CFLAGS - CFLAGS="$CFLAGS -m64" - AC_TRY_LINK(,, tcl_cv_cc_m64=yes, tcl_cv_cc_m64=no) - CFLAGS=$hold_cflags]) - AS_IF([test $tcl_cv_cc_m64 = yes], [ - CFLAGS="$CFLAGS -m64" - do64bit_ok=yes - ]) - ]) - - # The combo of gcc + glibc has a bug related to inlining of - # functions like strtod(). The -fno-builtin flag should address - # this problem but it does not work. The -fno-inline flag is kind - # of overkill but it works. Disable inlining only when one of the - # files in compat/*.c is being linked in. - - AS_IF([test x"${USE_COMPAT}" != x],[CFLAGS="$CFLAGS -fno-inline"]) - - ;; - GNU*) - SHLIB_CFLAGS="-fPIC" - SHLIB_LD_LIBS='${LIBS}' - SHLIB_SUFFIX=".so" - - SHLIB_LD='${CC} -shared' - DL_OBJS="" - DL_LIBS="-ldl" - LDFLAGS="$LDFLAGS -Wl,--export-dynamic" - CC_SEARCH_FLAGS="" - LD_SEARCH_FLAGS="" - AS_IF([test "`uname -m`" = "alpha"], [CFLAGS="$CFLAGS -mieee"]) - ;; - Lynx*) - SHLIB_CFLAGS="-fPIC" - SHLIB_LD_LIBS='${LIBS}' - SHLIB_SUFFIX=".so" - CFLAGS_OPTIMIZE=-02 - SHLIB_LD='${CC} -shared' - DL_OBJS="tclLoadDl.o" - DL_LIBS="-mshared -ldl" - LD_FLAGS="-Wl,--export-dynamic" - AS_IF([test $doRpath = yes], [ - CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' - LD_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}']) - ;; - OpenBSD-*) - SHLIB_CFLAGS="-fPIC" - SHLIB_LD='${CC} -shared ${SHLIB_CFLAGS}' - SHLIB_LD_LIBS='${LIBS}' - SHLIB_SUFFIX=".so" - DL_OBJS="tclLoadDl.o" - DL_LIBS="" - AS_IF([test $doRpath = yes], [ - CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}']) - LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} - SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.so.${SHLIB_VERSION}' - AC_CACHE_CHECK([for ELF], tcl_cv_ld_elf, [ - AC_EGREP_CPP(yes, [ -#ifdef __ELF__ - yes -#endif - ], tcl_cv_ld_elf=yes, tcl_cv_ld_elf=no)]) - AS_IF([test $tcl_cv_ld_elf = yes], [ - LDFLAGS=-Wl,-export-dynamic - ], [LDFLAGS=""]) - AS_IF([test "${TCL_THREADS}" = "1"], [ - # OpenBSD builds and links with -pthread, never -lpthread. - LIBS=`echo $LIBS | sed s/-lpthread//` - CFLAGS="$CFLAGS -pthread" - SHLIB_CFLAGS="$SHLIB_CFLAGS -pthread" - ]) - # OpenBSD doesn't do version numbers with dots. - UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.a' - TCL_LIB_VERSIONS_OK=nodots - ;; - NetBSD-*|FreeBSD-[[3-4]].*) - # FreeBSD 3.* and greater have ELF. - # NetBSD 2.* has ELF and can use 'cc -shared' to build shared libs - SHLIB_CFLAGS="-fPIC" - SHLIB_LD='${CC} -shared ${SHLIB_CFLAGS}' - SHLIB_LD_LIBS='${LIBS}' - SHLIB_SUFFIX=".so" - DL_OBJS="tclLoadDl.o" - DL_LIBS="" - LDFLAGS="$LDFLAGS -export-dynamic" - AS_IF([test $doRpath = yes], [ - CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}']) - LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} - AS_IF([test "${TCL_THREADS}" = "1"], [ - # The -pthread needs to go in the CFLAGS, not LIBS - LIBS=`echo $LIBS | sed s/-pthread//` - CFLAGS="$CFLAGS -pthread" - LDFLAGS="$LDFLAGS -pthread" - ]) - case $system in - FreeBSD-3.*) - # FreeBSD-3 doesn't handle version numbers with dots. - UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.a' - SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.so' - TCL_LIB_VERSIONS_OK=nodots - ;; - esac - ;; - FreeBSD-*) - # This configuration from FreeBSD Ports. - SHLIB_CFLAGS="-fPIC" - SHLIB_LD="${CC} -shared" - TCL_SHLIB_LD_EXTRAS="-soname \$[@]" - SHLIB_LD_LIBS='${LIBS}' - SHLIB_SUFFIX=".so" - DL_OBJS="tclLoadDl.o" - DL_LIBS="" - LDFLAGS="" - AS_IF([test $doRpath = yes], [ - CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' - LD_SEARCH_FLAGS='-rpath ${LIB_RUNTIME_DIR}']) - AS_IF([test "${TCL_THREADS}" = "1"], [ - # The -pthread needs to go in the LDFLAGS, not LIBS - LIBS=`echo $LIBS | sed s/-pthread//` - CFLAGS="$CFLAGS $PTHREAD_CFLAGS" - LDFLAGS="$LDFLAGS $PTHREAD_LIBS"]) - # Version numbers are dot-stripped by system policy. - TCL_TRIM_DOTS=`echo ${VERSION} | tr -d .` - UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.a' - SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}\$\{DBGX\}.so.1' - TCL_LIB_VERSIONS_OK=nodots - ;; - Darwin-*) - CFLAGS_OPTIMIZE="-Os" - SHLIB_CFLAGS="-fno-common" - # To avoid discrepancies between what headers configure sees during - # preprocessing tests and compiling tests, move any -isysroot and - # -mmacosx-version-min flags from CFLAGS to CPPFLAGS: - CPPFLAGS="${CPPFLAGS} `echo " ${CFLAGS}" | \ - awk 'BEGIN {FS=" +-";ORS=" "}; {for (i=2;i<=NF;i++) \ - if ([$]i~/^(isysroot|mmacosx-version-min)/) print "-"[$]i}'`" - CFLAGS="`echo " ${CFLAGS}" | \ - awk 'BEGIN {FS=" +-";ORS=" "}; {for (i=2;i<=NF;i++) \ - if (!([$]i~/^(isysroot|mmacosx-version-min)/)) print "-"[$]i}'`" - AS_IF([test $do64bit = yes], [ - case `arch` in - ppc) - AC_CACHE_CHECK([if compiler accepts -arch ppc64 flag], - tcl_cv_cc_arch_ppc64, [ - hold_cflags=$CFLAGS - CFLAGS="$CFLAGS -arch ppc64 -mpowerpc64 -mcpu=G5" - AC_TRY_LINK(,, tcl_cv_cc_arch_ppc64=yes, - tcl_cv_cc_arch_ppc64=no) - CFLAGS=$hold_cflags]) - AS_IF([test $tcl_cv_cc_arch_ppc64 = yes], [ - CFLAGS="$CFLAGS -arch ppc64 -mpowerpc64 -mcpu=G5" - do64bit_ok=yes - ]);; - i386) - AC_CACHE_CHECK([if compiler accepts -arch x86_64 flag], - tcl_cv_cc_arch_x86_64, [ - hold_cflags=$CFLAGS - CFLAGS="$CFLAGS -arch x86_64" - AC_TRY_LINK(,, tcl_cv_cc_arch_x86_64=yes, - tcl_cv_cc_arch_x86_64=no) - CFLAGS=$hold_cflags]) - AS_IF([test $tcl_cv_cc_arch_x86_64 = yes], [ - CFLAGS="$CFLAGS -arch x86_64" - do64bit_ok=yes - ]);; - *) - AC_MSG_WARN([Don't know how enable 64-bit on architecture `arch`]);; - esac - ], [ - # Check for combined 32-bit and 64-bit fat build - AS_IF([echo "$CFLAGS " |grep -E -q -- '-arch (ppc64|x86_64) ' \ - && echo "$CFLAGS " |grep -E -q -- '-arch (ppc|i386) '], [ - fat_32_64=yes]) - ]) - # TEA specific: use LDFLAGS_DEFAULT instead of LDFLAGS - SHLIB_LD='${CC} -dynamiclib ${CFLAGS} ${LDFLAGS_DEFAULT}' - AC_CACHE_CHECK([if ld accepts -single_module flag], tcl_cv_ld_single_module, [ - hold_ldflags=$LDFLAGS - LDFLAGS="$LDFLAGS -dynamiclib -Wl,-single_module" - AC_TRY_LINK(, [int i;], tcl_cv_ld_single_module=yes, tcl_cv_ld_single_module=no) - LDFLAGS=$hold_ldflags]) - AS_IF([test $tcl_cv_ld_single_module = yes], [ - SHLIB_LD="${SHLIB_LD} -Wl,-single_module" - ]) - # TEA specific: link shlib with current and compatiblity version flags - vers=`echo ${PACKAGE_VERSION} | sed -e 's/^\([[0-9]]\{1,5\}\)\(\(\.[[0-9]]\{1,3\}\)\{0,2\}\).*$/\1\2/p' -e d` - SHLIB_LD="${SHLIB_LD} -current_version ${vers:-0} -compatibility_version ${vers:-0}" - SHLIB_LD_LIBS='${LIBS}' - SHLIB_SUFFIX=".dylib" - DL_OBJS="tclLoadDyld.o" - DL_LIBS="" - # Don't use -prebind when building for Mac OS X 10.4 or later only: - AS_IF([test "`echo "${MACOSX_DEPLOYMENT_TARGET}" | awk -F '10\\.' '{print int([$]2)}'`" -lt 4 -a \ - "`echo "${CPPFLAGS}" | awk -F '-mmacosx-version-min=10\\.' '{print int([$]2)}'`" -lt 4], [ - LDFLAGS="$LDFLAGS -prebind"]) - LDFLAGS="$LDFLAGS -headerpad_max_install_names" - AC_CACHE_CHECK([if ld accepts -search_paths_first flag], - tcl_cv_ld_search_paths_first, [ - hold_ldflags=$LDFLAGS - LDFLAGS="$LDFLAGS -Wl,-search_paths_first" - AC_TRY_LINK(, [int i;], tcl_cv_ld_search_paths_first=yes, - tcl_cv_ld_search_paths_first=no) - LDFLAGS=$hold_ldflags]) - AS_IF([test $tcl_cv_ld_search_paths_first = yes], [ - LDFLAGS="$LDFLAGS -Wl,-search_paths_first" - ]) - AS_IF([test "$tcl_cv_cc_visibility_hidden" != yes], [ - AC_DEFINE(MODULE_SCOPE, [__private_extern__], - [Compiler support for module scope symbols]) - tcl_cv_cc_visibility_hidden=yes - ]) - CC_SEARCH_FLAGS="" - LD_SEARCH_FLAGS="" - LD_LIBRARY_PATH_VAR="DYLD_LIBRARY_PATH" - # TEA specific: for combined 32 & 64 bit fat builds of Tk - # extensions, verify that 64-bit build is possible. - AS_IF([test "$fat_32_64" = yes && test -n "${TK_BIN_DIR}"], [ - AS_IF([test "${TEA_WINDOWINGSYSTEM}" = x11], [ - AC_CACHE_CHECK([for 64-bit X11], tcl_cv_lib_x11_64, [ - for v in CFLAGS CPPFLAGS LDFLAGS; do - eval 'hold_'$v'="$'$v'";'$v'="`echo "$'$v' "|sed -e "s/-arch ppc / /g" -e "s/-arch i386 / /g"`"' - done - CPPFLAGS="$CPPFLAGS -I/usr/X11R6/include" - LDFLAGS="$LDFLAGS -L/usr/X11R6/lib -lX11" - AC_TRY_LINK([#include ], [XrmInitialize();], - tcl_cv_lib_x11_64=yes, tcl_cv_lib_x11_64=no) - for v in CFLAGS CPPFLAGS LDFLAGS; do - eval $v'="$hold_'$v'"' - done]) - ]) - AS_IF([test "${TEA_WINDOWINGSYSTEM}" = aqua], [ - AC_CACHE_CHECK([for 64-bit Tk], tcl_cv_lib_tk_64, [ - for v in CFLAGS CPPFLAGS LDFLAGS; do - eval 'hold_'$v'="$'$v'";'$v'="`echo "$'$v' "|sed -e "s/-arch ppc / /g" -e "s/-arch i386 / /g"`"' - done - CPPFLAGS="$CPPFLAGS -DUSE_TCL_STUBS=1 -DUSE_TK_STUBS=1 ${TCL_INCLUDES} ${TK_INCLUDES}" - LDFLAGS="$LDFLAGS ${TCL_STUB_LIB_SPEC} ${TK_STUB_LIB_SPEC}" - AC_TRY_LINK([#include ], [Tk_InitStubs(NULL, "", 0);], - tcl_cv_lib_tk_64=yes, tcl_cv_lib_tk_64=no) - for v in CFLAGS CPPFLAGS LDFLAGS; do - eval $v'="$hold_'$v'"' - done]) - ]) - # remove 64-bit arch flags from CFLAGS et al. if configuration - # does not support 64-bit. - AS_IF([test "$tcl_cv_lib_tk_64" = no -o "$tcl_cv_lib_x11_64" = no], [ - AC_MSG_NOTICE([Removing 64-bit architectures from compiler & linker flags]) - for v in CFLAGS CPPFLAGS LDFLAGS; do - eval $v'="`echo "$'$v' "|sed -e "s/-arch ppc64 / /g" -e "s/-arch x86_64 / /g"`"' - done]) - ]) - ;; - OS/390-*) - CFLAGS_OPTIMIZE="" # Optimizer is buggy - AC_DEFINE(_OE_SOCKETS, 1, # needed in sys/socket.h - [Should OS/390 do the right thing with sockets?]) - ;; - OSF1-V*) - # Digital OSF/1 - SHLIB_CFLAGS="" - AS_IF([test "$SHARED_BUILD" = 1], [ - SHLIB_LD='ld -shared -expect_unresolved "*"' - ], [ - SHLIB_LD='ld -non_shared -expect_unresolved "*"' - ]) - SHLIB_LD_LIBS="" - SHLIB_SUFFIX=".so" - DL_OBJS="tclLoadDl.o" - DL_LIBS="" - AS_IF([test $doRpath = yes], [ - CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' - LD_SEARCH_FLAGS='-rpath ${LIB_RUNTIME_DIR}']) - AS_IF([test "$GCC" = yes], [CFLAGS="$CFLAGS -mieee"], [ - CFLAGS="$CFLAGS -DHAVE_TZSET -std1 -ieee"]) - # see pthread_intro(3) for pthread support on osf1, k.furukawa - AS_IF([test "${TCL_THREADS}" = 1], [ - CFLAGS="$CFLAGS -DHAVE_PTHREAD_ATTR_SETSTACKSIZE" - CFLAGS="$CFLAGS -DTCL_THREAD_STACK_MIN=PTHREAD_STACK_MIN*64" - LIBS=`echo $LIBS | sed s/-lpthreads//` - AS_IF([test "$GCC" = yes], [ - LIBS="$LIBS -lpthread -lmach -lexc" - ], [ - CFLAGS="$CFLAGS -pthread" - LDFLAGS="$LDFLAGS -pthread" - ]) - ]) - ;; - QNX-6*) - # QNX RTP - # This may work for all QNX, but it was only reported for v6. - SHLIB_CFLAGS="-fPIC" - SHLIB_LD="ld -Bshareable -x" - SHLIB_LD_LIBS="" - SHLIB_SUFFIX=".so" - DL_OBJS="tclLoadDl.o" - # dlopen is in -lc on QNX - DL_LIBS="" - CC_SEARCH_FLAGS="" - LD_SEARCH_FLAGS="" - ;; - SunOS-5.[[0-6]]) - # Careful to not let 5.10+ fall into this case - - # Note: If _REENTRANT isn't defined, then Solaris - # won't define thread-safe library routines. - - AC_DEFINE(_REENTRANT, 1, [Do we want the reentrant OS API?]) - AC_DEFINE(_POSIX_PTHREAD_SEMANTICS, 1, - [Do we really want to follow the standard? Yes we do!]) - - SHLIB_CFLAGS="-KPIC" - - # Note: need the LIBS below, otherwise Tk won't find Tcl's - # symbols when dynamically loaded into tclsh. - - SHLIB_LD_LIBS='${LIBS}' - SHLIB_SUFFIX=".so" - DL_OBJS="tclLoadDl.o" - DL_LIBS="-ldl" - AS_IF([test "$GCC" = yes], [ - SHLIB_LD='${CC} -shared' - CC_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}' - LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} - ], [ - SHLIB_LD="/usr/ccs/bin/ld -G -z text" - CC_SEARCH_FLAGS='-R ${LIB_RUNTIME_DIR}' - LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} - ]) - ;; - SunOS-5*) - # Note: If _REENTRANT isn't defined, then Solaris - # won't define thread-safe library routines. - - AC_DEFINE(_REENTRANT, 1, [Do we want the reentrant OS API?]) - AC_DEFINE(_POSIX_PTHREAD_SEMANTICS, 1, - [Do we really want to follow the standard? Yes we do!]) - - SHLIB_CFLAGS="-KPIC" - - # Check to enable 64-bit flags for compiler/linker - AS_IF([test "$do64bit" = yes], [ - arch=`isainfo` - AS_IF([test "$arch" = "sparcv9 sparc"], [ - AS_IF([test "$GCC" = yes], [ - AS_IF([test "`${CC} -dumpversion | awk -F. '{print [$]1}'`" -lt 3], [ - AC_MSG_WARN([64bit mode not supported with GCC < 3.2 on $system]) - ], [ - do64bit_ok=yes - CFLAGS="$CFLAGS -m64 -mcpu=v9" - LDFLAGS="$LDFLAGS -m64 -mcpu=v9" - SHLIB_CFLAGS="-fPIC" - ]) - ], [ - do64bit_ok=yes - AS_IF([test "$do64bitVIS" = yes], [ - CFLAGS="$CFLAGS -xarch=v9a" - LDFLAGS_ARCH="-xarch=v9a" - ], [ - CFLAGS="$CFLAGS -xarch=v9" - LDFLAGS_ARCH="-xarch=v9" - ]) - # Solaris 64 uses this as well - #LD_LIBRARY_PATH_VAR="LD_LIBRARY_PATH_64" - ]) - ], [AS_IF([test "$arch" = "amd64 i386"], [ - AS_IF([test "$GCC" = yes], [ - case $system in - SunOS-5.1[[1-9]]*|SunOS-5.[[2-9]][[0-9]]*) - do64bit_ok=yes - CFLAGS="$CFLAGS -m64" - LDFLAGS="$LDFLAGS -m64";; - *) - AC_MSG_WARN([64bit mode not supported with GCC on $system]);; - esac - ], [ - do64bit_ok=yes - case $system in - SunOS-5.1[[1-9]]*|SunOS-5.[[2-9]][[0-9]]*) - CFLAGS="$CFLAGS -m64" - LDFLAGS="$LDFLAGS -m64";; - *) - CFLAGS="$CFLAGS -xarch=amd64" - LDFLAGS="$LDFLAGS -xarch=amd64";; - esac - ]) - ], [AC_MSG_WARN([64bit mode not supported for $arch])])]) - ]) - - # Note: need the LIBS below, otherwise Tk won't find Tcl's - # symbols when dynamically loaded into tclsh. - - SHLIB_LD_LIBS='${LIBS}' - SHLIB_SUFFIX=".so" - DL_OBJS="tclLoadDl.o" - DL_LIBS="-ldl" - AS_IF([test "$GCC" = yes], [ - SHLIB_LD='${CC} -shared' - CC_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}' - LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} - AS_IF([test "$do64bit_ok" = yes], [ - AS_IF([test "$arch" = "sparcv9 sparc"], [ - # We need to specify -static-libgcc or we need to - # add the path to the sparv9 libgcc. - # JH: static-libgcc is necessary for core Tcl, but may - # not be necessary for extensions. - SHLIB_LD="$SHLIB_LD -m64 -mcpu=v9 -static-libgcc" - # for finding sparcv9 libgcc, get the regular libgcc - # path, remove so name and append 'sparcv9' - #v9gcclibdir="`gcc -print-file-name=libgcc_s.so` | ..." - #CC_SEARCH_FLAGS="${CC_SEARCH_FLAGS},-R,$v9gcclibdir" - ], [AS_IF([test "$arch" = "amd64 i386"], [ - # JH: static-libgcc is necessary for core Tcl, but may - # not be necessary for extensions. - SHLIB_LD="$SHLIB_LD -m64 -static-libgcc" - ])]) - ]) - ], [ - case $system in - SunOS-5.[[1-9]][[0-9]]*) - # TEA specific: use LDFLAGS_DEFAULT instead of LDFLAGS - SHLIB_LD='${CC} -G -z text ${LDFLAGS_DEFAULT}';; - *) - SHLIB_LD='/usr/ccs/bin/ld -G -z text';; - esac - CC_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}' - LD_SEARCH_FLAGS='-R ${LIB_RUNTIME_DIR}' - ]) - ;; - esac - - AS_IF([test "$do64bit" = yes -a "$do64bit_ok" = no], [ - AC_MSG_WARN([64bit support being disabled -- don't know magic for this platform]) - ]) - -dnl # Add any CPPFLAGS set in the environment to our CFLAGS, but delay doing so -dnl # until the end of configure, as configure's compile and link tests use -dnl # both CPPFLAGS and CFLAGS (unlike our compile and link) but configure's -dnl # preprocessing tests use only CPPFLAGS. - AC_CONFIG_COMMANDS_PRE([CFLAGS="${CFLAGS} ${CPPFLAGS}"; CPPFLAGS=""]) - - # Step 4: disable dynamic loading if requested via a command-line switch. - - AC_ARG_ENABLE(load, - AC_HELP_STRING([--enable-load], - [allow dynamic loading and "load" command (default: on)]), - [tcl_ok=$enableval], [tcl_ok=yes]) - AS_IF([test "$tcl_ok" = no], [DL_OBJS=""]) - - AS_IF([test "x$DL_OBJS" != x], [BUILD_DLTEST="\$(DLTEST_TARGETS)"], [ - AC_MSG_WARN([Can't figure out how to do dynamic loading or shared libraries on this system.]) - SHLIB_CFLAGS="" - SHLIB_LD="" - SHLIB_SUFFIX="" - DL_OBJS="tclLoadNone.o" - DL_LIBS="" - LDFLAGS="$LDFLAGS_ORIG" - CC_SEARCH_FLAGS="" - LD_SEARCH_FLAGS="" - BUILD_DLTEST="" - ]) - LDFLAGS="$LDFLAGS $LDFLAGS_ARCH" - - # If we're running gcc, then change the C flags for compiling shared - # libraries to the right flags for gcc, instead of those for the - # standard manufacturer compiler. - - AS_IF([test "$DL_OBJS" != "tclLoadNone.o" -a "$GCC" = yes], [ - case $system in - AIX-*) ;; - BSD/OS*) ;; - CYGWIN_*) ;; - IRIX*) ;; - NetBSD-*|FreeBSD-*|OpenBSD-*) ;; - Darwin-*) ;; - SCO_SV-3.2*) ;; - windows) ;; - *) SHLIB_CFLAGS="-fPIC" ;; - esac]) - - AS_IF([test "$tcl_cv_cc_visibility_hidden" != yes], [ - AC_DEFINE(MODULE_SCOPE, [extern], - [No Compiler support for module scope symbols]) - AC_DEFINE(NO_VIZ) - ]) - - AS_IF([test "$SHARED_LIB_SUFFIX" = ""], [ - # TEA specific: use PACKAGE_VERSION instead of VERSION - SHARED_LIB_SUFFIX='${PACKAGE_VERSION}${SHLIB_SUFFIX}']) - AS_IF([test "$UNSHARED_LIB_SUFFIX" = ""], [ - # TEA specific: use PACKAGE_VERSION instead of VERSION - UNSHARED_LIB_SUFFIX='${PACKAGE_VERSION}.a']) - - AC_SUBST(DL_LIBS) - - AC_SUBST(CFLAGS_DEBUG) - AC_SUBST(CFLAGS_OPTIMIZE) - AC_SUBST(CFLAGS_WARNING) - - AC_SUBST(STLIB_LD) - AC_SUBST(SHLIB_LD) - - AC_SUBST(SHLIB_LD_LIBS) - AC_SUBST(SHLIB_CFLAGS) - - AC_SUBST(LD_LIBRARY_PATH_VAR) - - # These must be called after we do the basic CFLAGS checks and - # verify any possible 64-bit or similar switches are necessary - TEA_TCL_EARLY_FLAGS - TEA_TCL_64BIT_FLAGS -]) - -#-------------------------------------------------------------------- -# TEA_SERIAL_PORT -# -# Determine which interface to use to talk to the serial port. -# Note that #include lines must begin in leftmost column for -# some compilers to recognize them as preprocessor directives, -# and some build environments have stdin not pointing at a -# pseudo-terminal (usually /dev/null instead.) -# -# Arguments: -# none -# -# Results: -# -# Defines only one of the following vars: -# HAVE_SYS_MODEM_H -# USE_TERMIOS -# USE_TERMIO -# USE_SGTTY -# -#-------------------------------------------------------------------- - -AC_DEFUN([TEA_SERIAL_PORT], [ - AC_CHECK_HEADERS(sys/modem.h) - AC_CACHE_CHECK([termios vs. termio vs. sgtty], tcl_cv_api_serial, [ - AC_TRY_RUN([ -#include - -int main() { - struct termios t; - if (tcgetattr(0, &t) == 0) { - cfsetospeed(&t, 0); - t.c_cflag |= PARENB | PARODD | CSIZE | CSTOPB; - return 0; - } - return 1; -}], tcl_cv_api_serial=termios, tcl_cv_api_serial=no, tcl_cv_api_serial=no) - if test $tcl_cv_api_serial = no ; then - AC_TRY_RUN([ -#include - -int main() { - struct termio t; - if (ioctl(0, TCGETA, &t) == 0) { - t.c_cflag |= CBAUD | PARENB | PARODD | CSIZE | CSTOPB; - return 0; - } - return 1; -}], tcl_cv_api_serial=termio, tcl_cv_api_serial=no, tcl_cv_api_serial=no) - fi - if test $tcl_cv_api_serial = no ; then - AC_TRY_RUN([ -#include - -int main() { - struct sgttyb t; - if (ioctl(0, TIOCGETP, &t) == 0) { - t.sg_ospeed = 0; - t.sg_flags |= ODDP | EVENP | RAW; - return 0; - } - return 1; -}], tcl_cv_api_serial=sgtty, tcl_cv_api_serial=no, tcl_cv_api_serial=no) - fi - if test $tcl_cv_api_serial = no ; then - AC_TRY_RUN([ -#include -#include - -int main() { - struct termios t; - if (tcgetattr(0, &t) == 0 - || errno == ENOTTY || errno == ENXIO || errno == EINVAL) { - cfsetospeed(&t, 0); - t.c_cflag |= PARENB | PARODD | CSIZE | CSTOPB; - return 0; - } - return 1; -}], tcl_cv_api_serial=termios, tcl_cv_api_serial=no, tcl_cv_api_serial=no) - fi - if test $tcl_cv_api_serial = no; then - AC_TRY_RUN([ -#include -#include - -int main() { - struct termio t; - if (ioctl(0, TCGETA, &t) == 0 - || errno == ENOTTY || errno == ENXIO || errno == EINVAL) { - t.c_cflag |= CBAUD | PARENB | PARODD | CSIZE | CSTOPB; - return 0; - } - return 1; - }], tcl_cv_api_serial=termio, tcl_cv_api_serial=no, tcl_cv_api_serial=no) - fi - if test $tcl_cv_api_serial = no; then - AC_TRY_RUN([ -#include -#include - -int main() { - struct sgttyb t; - if (ioctl(0, TIOCGETP, &t) == 0 - || errno == ENOTTY || errno == ENXIO || errno == EINVAL) { - t.sg_ospeed = 0; - t.sg_flags |= ODDP | EVENP | RAW; - return 0; - } - return 1; -}], tcl_cv_api_serial=sgtty, tcl_cv_api_serial=none, tcl_cv_api_serial=none) - fi]) - case $tcl_cv_api_serial in - termios) AC_DEFINE(USE_TERMIOS, 1, [Use the termios API for serial lines]);; - termio) AC_DEFINE(USE_TERMIO, 1, [Use the termio API for serial lines]);; - sgtty) AC_DEFINE(USE_SGTTY, 1, [Use the sgtty API for serial lines]);; - esac -]) - -#-------------------------------------------------------------------- -# TEA_MISSING_POSIX_HEADERS -# -# Supply substitutes for missing POSIX header files. Special -# notes: -# - stdlib.h doesn't define strtol, strtoul, or -# strtod in some versions of SunOS -# - some versions of string.h don't declare procedures such -# as strstr -# -# Arguments: -# none -# -# Results: -# -# Defines some of the following vars: -# NO_DIRENT_H -# NO_ERRNO_H -# NO_VALUES_H -# HAVE_LIMITS_H or NO_LIMITS_H -# NO_STDLIB_H -# NO_STRING_H -# NO_SYS_WAIT_H -# NO_DLFCN_H -# HAVE_SYS_PARAM_H -# -# HAVE_STRING_H ? -# -# tkUnixPort.h checks for HAVE_LIMITS_H, so do both HAVE and -# CHECK on limits.h -#-------------------------------------------------------------------- - -AC_DEFUN([TEA_MISSING_POSIX_HEADERS], [ - AC_CACHE_CHECK([dirent.h], tcl_cv_dirent_h, [ - AC_TRY_LINK([#include -#include ], [ -#ifndef _POSIX_SOURCE -# ifdef __Lynx__ - /* - * Generate compilation error to make the test fail: Lynx headers - * are only valid if really in the POSIX environment. - */ - - missing_procedure(); -# endif -#endif -DIR *d; -struct dirent *entryPtr; -char *p; -d = opendir("foobar"); -entryPtr = readdir(d); -p = entryPtr->d_name; -closedir(d); -], tcl_cv_dirent_h=yes, tcl_cv_dirent_h=no)]) - - if test $tcl_cv_dirent_h = no; then - AC_DEFINE(NO_DIRENT_H, 1, [Do we have ?]) - fi - - # TEA specific: - AC_CHECK_HEADER(errno.h, , [AC_DEFINE(NO_ERRNO_H, 1, [Do we have ?])]) - AC_CHECK_HEADER(float.h, , [AC_DEFINE(NO_FLOAT_H, 1, [Do we have ?])]) - AC_CHECK_HEADER(values.h, , [AC_DEFINE(NO_VALUES_H, 1, [Do we have ?])]) - AC_CHECK_HEADER(limits.h, - [AC_DEFINE(HAVE_LIMITS_H, 1, [Do we have ?])], - [AC_DEFINE(NO_LIMITS_H, 1, [Do we have ?])]) - AC_CHECK_HEADER(stdlib.h, tcl_ok=1, tcl_ok=0) - AC_EGREP_HEADER(strtol, stdlib.h, , tcl_ok=0) - AC_EGREP_HEADER(strtoul, stdlib.h, , tcl_ok=0) - AC_EGREP_HEADER(strtod, stdlib.h, , tcl_ok=0) - if test $tcl_ok = 0; then - AC_DEFINE(NO_STDLIB_H, 1, [Do we have ?]) - fi - AC_CHECK_HEADER(string.h, tcl_ok=1, tcl_ok=0) - AC_EGREP_HEADER(strstr, string.h, , tcl_ok=0) - AC_EGREP_HEADER(strerror, string.h, , tcl_ok=0) - - # See also memmove check below for a place where NO_STRING_H can be - # set and why. - - if test $tcl_ok = 0; then - AC_DEFINE(NO_STRING_H, 1, [Do we have ?]) - fi - - AC_CHECK_HEADER(sys/wait.h, , [AC_DEFINE(NO_SYS_WAIT_H, 1, [Do we have ?])]) - AC_CHECK_HEADER(dlfcn.h, , [AC_DEFINE(NO_DLFCN_H, 1, [Do we have ?])]) - - # OS/390 lacks sys/param.h (and doesn't need it, by chance). - AC_HAVE_HEADERS(sys/param.h) -]) - -#-------------------------------------------------------------------- -# TEA_PATH_X -# -# Locate the X11 header files and the X11 library archive. Try -# the ac_path_x macro first, but if it doesn't find the X stuff -# (e.g. because there's no xmkmf program) then check through -# a list of possible directories. Under some conditions the -# autoconf macro will return an include directory that contains -# no include files, so double-check its result just to be safe. -# -# This should be called after TEA_CONFIG_CFLAGS as setting the -# LIBS line can confuse some configure macro magic. -# -# Arguments: -# none -# -# Results: -# -# Sets the following vars: -# XINCLUDES -# XLIBSW -# PKG_LIBS (appends to) -# -#-------------------------------------------------------------------- - -AC_DEFUN([TEA_PATH_X], [ - if test "${TEA_WINDOWINGSYSTEM}" = "x11" ; then - TEA_PATH_UNIX_X - fi -]) - -AC_DEFUN([TEA_PATH_UNIX_X], [ - AC_PATH_X - not_really_there="" - if test "$no_x" = ""; then - if test "$x_includes" = ""; then - AC_TRY_CPP([#include ], , not_really_there="yes") - else - if test ! -r $x_includes/X11/Intrinsic.h; then - not_really_there="yes" - fi - fi - fi - if test "$no_x" = "yes" -o "$not_really_there" = "yes"; then - AC_MSG_CHECKING([for X11 header files]) - found_xincludes="no" - AC_TRY_CPP([#include ], found_xincludes="yes", found_xincludes="no") - if test "$found_xincludes" = "no"; then - dirs="/usr/unsupported/include /usr/local/include /usr/X386/include /usr/X11R6/include /usr/X11R5/include /usr/include/X11R5 /usr/include/X11R4 /usr/openwin/include /usr/X11/include /usr/sww/include" - for i in $dirs ; do - if test -r $i/X11/Intrinsic.h; then - AC_MSG_RESULT([$i]) - XINCLUDES=" -I$i" - found_xincludes="yes" - break - fi - done - fi - else - if test "$x_includes" != ""; then - XINCLUDES="-I$x_includes" - found_xincludes="yes" - fi - fi - if test found_xincludes = "no"; then - AC_MSG_RESULT([couldn't find any!]) - fi - - if test "$no_x" = yes; then - AC_MSG_CHECKING([for X11 libraries]) - XLIBSW=nope - dirs="/usr/unsupported/lib /usr/local/lib /usr/X386/lib /usr/X11R6/lib /usr/X11R5/lib /usr/lib/X11R5 /usr/lib/X11R4 /usr/openwin/lib /usr/X11/lib /usr/sww/X11/lib" - for i in $dirs ; do - if test -r $i/libX11.a -o -r $i/libX11.so -o -r $i/libX11.sl -o -r $i/libX11.dylib; then - AC_MSG_RESULT([$i]) - XLIBSW="-L$i -lX11" - x_libraries="$i" - break - fi - done - else - if test "$x_libraries" = ""; then - XLIBSW=-lX11 - else - XLIBSW="-L$x_libraries -lX11" - fi - fi - if test "$XLIBSW" = nope ; then - AC_CHECK_LIB(Xwindow, XCreateWindow, XLIBSW=-lXwindow) - fi - if test "$XLIBSW" = nope ; then - AC_MSG_RESULT([could not find any! Using -lX11.]) - XLIBSW=-lX11 - fi - # TEA specific: - if test x"${XLIBSW}" != x ; then - PKG_LIBS="${PKG_LIBS} ${XLIBSW}" - fi -]) - -#-------------------------------------------------------------------- -# TEA_BLOCKING_STYLE -# -# The statements below check for systems where POSIX-style -# non-blocking I/O (O_NONBLOCK) doesn't work or is unimplemented. -# On these systems (mostly older ones), use the old BSD-style -# FIONBIO approach instead. -# -# Arguments: -# none -# -# Results: -# -# Defines some of the following vars: -# HAVE_SYS_IOCTL_H -# HAVE_SYS_FILIO_H -# USE_FIONBIO -# O_NONBLOCK -# -#-------------------------------------------------------------------- - -AC_DEFUN([TEA_BLOCKING_STYLE], [ - AC_CHECK_HEADERS(sys/ioctl.h) - AC_CHECK_HEADERS(sys/filio.h) - TEA_CONFIG_SYSTEM - AC_MSG_CHECKING([FIONBIO vs. O_NONBLOCK for nonblocking I/O]) - case $system in - # There used to be code here to use FIONBIO under AIX. However, it - # was reported that FIONBIO doesn't work under AIX 3.2.5. Since - # using O_NONBLOCK seems fine under AIX 4.*, I removed the FIONBIO - # code (JO, 5/31/97). - - OSF*) - AC_DEFINE(USE_FIONBIO, 1, [Should we use FIONBIO?]) - AC_MSG_RESULT([FIONBIO]) - ;; - SunOS-4*) - AC_DEFINE(USE_FIONBIO, 1, [Should we use FIONBIO?]) - AC_MSG_RESULT([FIONBIO]) - ;; - *) - AC_MSG_RESULT([O_NONBLOCK]) - ;; - esac -]) - -#-------------------------------------------------------------------- -# TEA_TIME_HANDLER -# -# Checks how the system deals with time.h, what time structures -# are used on the system, and what fields the structures have. -# -# Arguments: -# none -# -# Results: -# -# Defines some of the following vars: -# USE_DELTA_FOR_TZ -# HAVE_TM_GMTOFF -# HAVE_TM_TZADJ -# HAVE_TIMEZONE_VAR -# -#-------------------------------------------------------------------- - -AC_DEFUN([TEA_TIME_HANDLER], [ - AC_CHECK_HEADERS(sys/time.h) - AC_HEADER_TIME - AC_STRUCT_TIMEZONE - - AC_CHECK_FUNCS(gmtime_r localtime_r) - - AC_CACHE_CHECK([tm_tzadj in struct tm], tcl_cv_member_tm_tzadj, [ - AC_TRY_COMPILE([#include ], [struct tm tm; tm.tm_tzadj;], - tcl_cv_member_tm_tzadj=yes, tcl_cv_member_tm_tzadj=no)]) - if test $tcl_cv_member_tm_tzadj = yes ; then - AC_DEFINE(HAVE_TM_TZADJ, 1, [Should we use the tm_tzadj field of struct tm?]) - fi - - AC_CACHE_CHECK([tm_gmtoff in struct tm], tcl_cv_member_tm_gmtoff, [ - AC_TRY_COMPILE([#include ], [struct tm tm; tm.tm_gmtoff;], - tcl_cv_member_tm_gmtoff=yes, tcl_cv_member_tm_gmtoff=no)]) - if test $tcl_cv_member_tm_gmtoff = yes ; then - AC_DEFINE(HAVE_TM_GMTOFF, 1, [Should we use the tm_gmtoff field of struct tm?]) - fi - - # - # Its important to include time.h in this check, as some systems - # (like convex) have timezone functions, etc. - # - AC_CACHE_CHECK([long timezone variable], tcl_cv_timezone_long, [ - AC_TRY_COMPILE([#include ], - [extern long timezone; - timezone += 1; - exit (0);], - tcl_cv_timezone_long=yes, tcl_cv_timezone_long=no)]) - if test $tcl_cv_timezone_long = yes ; then - AC_DEFINE(HAVE_TIMEZONE_VAR, 1, [Should we use the global timezone variable?]) - else - # - # On some systems (eg IRIX 6.2), timezone is a time_t and not a long. - # - AC_CACHE_CHECK([time_t timezone variable], tcl_cv_timezone_time, [ - AC_TRY_COMPILE([#include ], - [extern time_t timezone; - timezone += 1; - exit (0);], - tcl_cv_timezone_time=yes, tcl_cv_timezone_time=no)]) - if test $tcl_cv_timezone_time = yes ; then - AC_DEFINE(HAVE_TIMEZONE_VAR, 1, [Should we use the global timezone variable?]) - fi - fi -]) - -#-------------------------------------------------------------------- -# TEA_BUGGY_STRTOD -# -# Under Solaris 2.4, strtod returns the wrong value for the -# terminating character under some conditions. Check for this -# and if the problem exists use a substitute procedure -# "fixstrtod" (provided by Tcl) that corrects the error. -# Also, on Compaq's Tru64 Unix 5.0, -# strtod(" ") returns 0.0 instead of a failure to convert. -# -# Arguments: -# none -# -# Results: -# -# Might defines some of the following vars: -# strtod (=fixstrtod) -# -#-------------------------------------------------------------------- - -AC_DEFUN([TEA_BUGGY_STRTOD], [ - AC_CHECK_FUNC(strtod, tcl_strtod=1, tcl_strtod=0) - if test "$tcl_strtod" = 1; then - AC_CACHE_CHECK([for Solaris2.4/Tru64 strtod bugs], tcl_cv_strtod_buggy,[ - AC_TRY_RUN([ - extern double strtod(); - int main() { - char *infString="Inf", *nanString="NaN", *spaceString=" "; - char *term; - double value; - value = strtod(infString, &term); - if ((term != infString) && (term[-1] == 0)) { - exit(1); - } - value = strtod(nanString, &term); - if ((term != nanString) && (term[-1] == 0)) { - exit(1); - } - value = strtod(spaceString, &term); - if (term == (spaceString+1)) { - exit(1); - } - exit(0); - }], tcl_cv_strtod_buggy=ok, tcl_cv_strtod_buggy=buggy, - tcl_cv_strtod_buggy=buggy)]) - if test "$tcl_cv_strtod_buggy" = buggy; then - AC_LIBOBJ([fixstrtod]) - USE_COMPAT=1 - AC_DEFINE(strtod, fixstrtod, [Do we want to use the strtod() in compat?]) - fi - fi -]) - -#-------------------------------------------------------------------- -# TEA_TCL_LINK_LIBS -# -# Search for the libraries needed to link the Tcl shell. -# Things like the math library (-lm) and socket stuff (-lsocket vs. -# -lnsl) are dealt with here. -# -# Arguments: -# Requires the following vars to be set in the Makefile: -# DL_LIBS -# LIBS -# MATH_LIBS -# -# Results: -# -# Subst's the following var: -# TCL_LIBS -# MATH_LIBS -# -# Might append to the following vars: -# LIBS -# -# Might define the following vars: -# HAVE_NET_ERRNO_H -# -#-------------------------------------------------------------------- - -AC_DEFUN([TEA_TCL_LINK_LIBS], [ - #-------------------------------------------------------------------- - # On a few very rare systems, all of the libm.a stuff is - # already in libc.a. Set compiler flags accordingly. - # Also, Linux requires the "ieee" library for math to work - # right (and it must appear before "-lm"). - #-------------------------------------------------------------------- - - AC_CHECK_FUNC(sin, MATH_LIBS="", MATH_LIBS="-lm") - AC_CHECK_LIB(ieee, main, [MATH_LIBS="-lieee $MATH_LIBS"]) - - #-------------------------------------------------------------------- - # Interactive UNIX requires -linet instead of -lsocket, plus it - # needs net/errno.h to define the socket-related error codes. - #-------------------------------------------------------------------- - - AC_CHECK_LIB(inet, main, [LIBS="$LIBS -linet"]) - AC_CHECK_HEADER(net/errno.h, [ - AC_DEFINE(HAVE_NET_ERRNO_H, 1, [Do we have ?])]) - - #-------------------------------------------------------------------- - # Check for the existence of the -lsocket and -lnsl libraries. - # The order here is important, so that they end up in the right - # order in the command line generated by make. Here are some - # special considerations: - # 1. Use "connect" and "accept" to check for -lsocket, and - # "gethostbyname" to check for -lnsl. - # 2. Use each function name only once: can't redo a check because - # autoconf caches the results of the last check and won't redo it. - # 3. Use -lnsl and -lsocket only if they supply procedures that - # aren't already present in the normal libraries. This is because - # IRIX 5.2 has libraries, but they aren't needed and they're - # bogus: they goof up name resolution if used. - # 4. On some SVR4 systems, can't use -lsocket without -lnsl too. - # To get around this problem, check for both libraries together - # if -lsocket doesn't work by itself. - #-------------------------------------------------------------------- - - tcl_checkBoth=0 - AC_CHECK_FUNC(connect, tcl_checkSocket=0, tcl_checkSocket=1) - if test "$tcl_checkSocket" = 1; then - AC_CHECK_FUNC(setsockopt, , [AC_CHECK_LIB(socket, setsockopt, - LIBS="$LIBS -lsocket", tcl_checkBoth=1)]) - fi - if test "$tcl_checkBoth" = 1; then - tk_oldLibs=$LIBS - LIBS="$LIBS -lsocket -lnsl" - AC_CHECK_FUNC(accept, tcl_checkNsl=0, [LIBS=$tk_oldLibs]) - fi - AC_CHECK_FUNC(gethostbyname, , [AC_CHECK_LIB(nsl, gethostbyname, - [LIBS="$LIBS -lnsl"])]) - - # TEA specific: Don't perform the eval of the libraries here because - # DL_LIBS won't be set until we call TEA_CONFIG_CFLAGS - - TCL_LIBS='${DL_LIBS} ${LIBS} ${MATH_LIBS}' - AC_SUBST(TCL_LIBS) - AC_SUBST(MATH_LIBS) -]) - -#-------------------------------------------------------------------- -# TEA_TCL_EARLY_FLAGS -# -# Check for what flags are needed to be passed so the correct OS -# features are available. -# -# Arguments: -# None -# -# Results: -# -# Might define the following vars: -# _ISOC99_SOURCE -# _LARGEFILE64_SOURCE -# _LARGEFILE_SOURCE64 -# -#-------------------------------------------------------------------- - -AC_DEFUN([TEA_TCL_EARLY_FLAG],[ - AC_CACHE_VAL([tcl_cv_flag_]translit($1,[A-Z],[a-z]), - AC_TRY_COMPILE([$2], $3, [tcl_cv_flag_]translit($1,[A-Z],[a-z])=no, - AC_TRY_COMPILE([[#define ]$1[ 1 -]$2], $3, - [tcl_cv_flag_]translit($1,[A-Z],[a-z])=yes, - [tcl_cv_flag_]translit($1,[A-Z],[a-z])=no))) - if test ["x${tcl_cv_flag_]translit($1,[A-Z],[a-z])[}" = "xyes"] ; then - AC_DEFINE($1, 1, [Add the ]$1[ flag when building]) - tcl_flags="$tcl_flags $1" - fi -]) - -AC_DEFUN([TEA_TCL_EARLY_FLAGS],[ - AC_MSG_CHECKING([for required early compiler flags]) - tcl_flags="" - TEA_TCL_EARLY_FLAG(_ISOC99_SOURCE,[#include ], - [char *p = (char *)strtoll; char *q = (char *)strtoull;]) - TEA_TCL_EARLY_FLAG(_LARGEFILE64_SOURCE,[#include ], - [struct stat64 buf; int i = stat64("/", &buf);]) - TEA_TCL_EARLY_FLAG(_LARGEFILE_SOURCE64,[#include ], - [char *p = (char *)open64;]) - if test "x${tcl_flags}" = "x" ; then - AC_MSG_RESULT([none]) - else - AC_MSG_RESULT([${tcl_flags}]) - fi -]) - -#-------------------------------------------------------------------- -# TEA_TCL_64BIT_FLAGS -# -# Check for what is defined in the way of 64-bit features. -# -# Arguments: -# None -# -# Results: -# -# Might define the following vars: -# TCL_WIDE_INT_IS_LONG -# TCL_WIDE_INT_TYPE -# HAVE_STRUCT_DIRENT64 -# HAVE_STRUCT_STAT64 -# HAVE_TYPE_OFF64_T -# -#-------------------------------------------------------------------- - -AC_DEFUN([TEA_TCL_64BIT_FLAGS], [ - AC_MSG_CHECKING([for 64-bit integer type]) - AC_CACHE_VAL(tcl_cv_type_64bit,[ - tcl_cv_type_64bit=none - # See if the compiler knows natively about __int64 - AC_TRY_COMPILE(,[__int64 value = (__int64) 0;], - tcl_type_64bit=__int64, tcl_type_64bit="long long") - # See if we should use long anyway Note that we substitute in the - # type that is our current guess for a 64-bit type inside this check - # program, so it should be modified only carefully... - AC_TRY_COMPILE(,[switch (0) { - case 1: case (sizeof(]${tcl_type_64bit}[)==sizeof(long)): ; - }],tcl_cv_type_64bit=${tcl_type_64bit})]) - if test "${tcl_cv_type_64bit}" = none ; then - AC_DEFINE(TCL_WIDE_INT_IS_LONG, 1, [Are wide integers to be implemented with C 'long's?]) - AC_MSG_RESULT([using long]) - elif test "${tcl_cv_type_64bit}" = "__int64" \ - -a "${TEA_PLATFORM}" = "windows" ; then - # TEA specific: We actually want to use the default tcl.h checks in - # this case to handle both TCL_WIDE_INT_TYPE and TCL_LL_MODIFIER* - AC_MSG_RESULT([using Tcl header defaults]) - else - AC_DEFINE_UNQUOTED(TCL_WIDE_INT_TYPE,${tcl_cv_type_64bit}, - [What type should be used to define wide integers?]) - AC_MSG_RESULT([${tcl_cv_type_64bit}]) - - # Now check for auxiliary declarations - AC_CACHE_CHECK([for struct dirent64], tcl_cv_struct_dirent64,[ - AC_TRY_COMPILE([#include -#include ],[struct dirent64 p;], - tcl_cv_struct_dirent64=yes,tcl_cv_struct_dirent64=no)]) - if test "x${tcl_cv_struct_dirent64}" = "xyes" ; then - AC_DEFINE(HAVE_STRUCT_DIRENT64, 1, [Is 'struct dirent64' in ?]) - fi - - AC_CACHE_CHECK([for struct stat64], tcl_cv_struct_stat64,[ - AC_TRY_COMPILE([#include ],[struct stat64 p; -], - tcl_cv_struct_stat64=yes,tcl_cv_struct_stat64=no)]) - if test "x${tcl_cv_struct_stat64}" = "xyes" ; then - AC_DEFINE(HAVE_STRUCT_STAT64, 1, [Is 'struct stat64' in ?]) - fi - - AC_CHECK_FUNCS(open64 lseek64) - AC_MSG_CHECKING([for off64_t]) - AC_CACHE_VAL(tcl_cv_type_off64_t,[ - AC_TRY_COMPILE([#include ],[off64_t offset; -], - tcl_cv_type_off64_t=yes,tcl_cv_type_off64_t=no)]) - dnl Define HAVE_TYPE_OFF64_T only when the off64_t type and the - dnl functions lseek64 and open64 are defined. - if test "x${tcl_cv_type_off64_t}" = "xyes" && \ - test "x${ac_cv_func_lseek64}" = "xyes" && \ - test "x${ac_cv_func_open64}" = "xyes" ; then - AC_DEFINE(HAVE_TYPE_OFF64_T, 1, [Is off64_t in ?]) - AC_MSG_RESULT([yes]) - else - AC_MSG_RESULT([no]) - fi - fi -]) - -## -## Here ends the standard Tcl configuration bits and starts the -## TEA specific functions -## - -#------------------------------------------------------------------------ -# TEA_INIT -- -# -# Init various Tcl Extension Architecture (TEA) variables. -# This should be the first called TEA_* macro. -# -# Arguments: -# none -# -# Results: -# -# Defines and substs the following vars: -# CYGPATH -# EXEEXT -# Defines only: -# TEA_VERSION -# TEA_INITED -# TEA_PLATFORM (windows or unix) -# -# "cygpath" is used on windows to generate native path names for include -# files. These variables should only be used with the compiler and linker -# since they generate native path names. -# -# EXEEXT -# Select the executable extension based on the host type. This -# is a lightweight replacement for AC_EXEEXT that doesn't require -# a compiler. -#------------------------------------------------------------------------ - -AC_DEFUN([TEA_INIT], [ - # TEA extensions pass this us the version of TEA they think they - # are compatible with. - TEA_VERSION="3.8" - - AC_MSG_CHECKING([for correct TEA configuration]) - if test x"${PACKAGE_NAME}" = x ; then - AC_MSG_ERROR([ -The PACKAGE_NAME variable must be defined by your TEA configure.in]) - fi - if test x"$1" = x ; then - AC_MSG_ERROR([ -TEA version not specified.]) - elif test "$1" != "${TEA_VERSION}" ; then - AC_MSG_RESULT([warning: requested TEA version "$1", have "${TEA_VERSION}"]) - else - AC_MSG_RESULT([ok (TEA ${TEA_VERSION})]) - fi - case "`uname -s`" in - *win32*|*WIN32*|*MINGW32_*) - AC_CHECK_PROG(CYGPATH, cygpath, cygpath -w, echo) - EXEEXT=".exe" - TEA_PLATFORM="windows" - ;; - *CYGWIN_*) - CYGPATH=echo - EXEEXT=".exe" - # TEA_PLATFORM is determined later - ;; - *) - CYGPATH=echo - EXEEXT="" - TEA_PLATFORM="unix" - ;; - esac - - # Check if exec_prefix is set. If not use fall back to prefix. - # Note when adjusted, so that TEA_PREFIX can correct for this. - # This is needed for recursive configures, since autoconf propagates - # $prefix, but not $exec_prefix (doh!). - if test x$exec_prefix = xNONE ; then - exec_prefix_default=yes - exec_prefix=$prefix - fi - - AC_SUBST(EXEEXT) - AC_SUBST(CYGPATH) - - # This package name must be replaced statically for AC_SUBST to work - AC_SUBST(PKG_LIB_FILE) - # Substitute STUB_LIB_FILE in case package creates a stub library too. - AC_SUBST(PKG_STUB_LIB_FILE) - - # We AC_SUBST these here to ensure they are subst'ed, - # in case the user doesn't call TEA_ADD_... - AC_SUBST(PKG_STUB_SOURCES) - AC_SUBST(PKG_STUB_OBJECTS) - AC_SUBST(PKG_TCL_SOURCES) - AC_SUBST(PKG_HEADERS) - AC_SUBST(PKG_INCLUDES) - AC_SUBST(PKG_LIBS) - AC_SUBST(PKG_CFLAGS) -]) - -#------------------------------------------------------------------------ -# TEA_ADD_SOURCES -- -# -# Specify one or more source files. Users should check for -# the right platform before adding to their list. -# It is not important to specify the directory, as long as it is -# in the generic, win or unix subdirectory of $(srcdir). -# -# Arguments: -# one or more file names -# -# Results: -# -# Defines and substs the following vars: -# PKG_SOURCES -# PKG_OBJECTS -#------------------------------------------------------------------------ -AC_DEFUN([TEA_ADD_SOURCES], [ - vars="$@" - for i in $vars; do - case $i in - [\$]*) - # allow $-var names - PKG_SOURCES="$PKG_SOURCES $i" - PKG_OBJECTS="$PKG_OBJECTS $i" - ;; - *) - # check for existence - allows for generic/win/unix VPATH - # To add more dirs here (like 'src'), you have to update VPATH - # in Makefile.in as well - if test ! -f "${srcdir}/$i" -a ! -f "${srcdir}/generic/$i" \ - -a ! -f "${srcdir}/win/$i" -a ! -f "${srcdir}/unix/$i" \ - ; then - AC_MSG_ERROR([could not find source file '$i']) - fi - PKG_SOURCES="$PKG_SOURCES $i" - # this assumes it is in a VPATH dir - i=`basename $i` - # handle user calling this before or after TEA_SETUP_COMPILER - if test x"${OBJEXT}" != x ; then - j="`echo $i | sed -e 's/\.[[^.]]*$//'`.${OBJEXT}" - else - j="`echo $i | sed -e 's/\.[[^.]]*$//'`.\${OBJEXT}" - fi - PKG_OBJECTS="$PKG_OBJECTS $j" - ;; - esac - done - AC_SUBST(PKG_SOURCES) - AC_SUBST(PKG_OBJECTS) -]) - -#------------------------------------------------------------------------ -# TEA_ADD_STUB_SOURCES -- -# -# Specify one or more source files. Users should check for -# the right platform before adding to their list. -# It is not important to specify the directory, as long as it is -# in the generic, win or unix subdirectory of $(srcdir). -# -# Arguments: -# one or more file names -# -# Results: -# -# Defines and substs the following vars: -# PKG_STUB_SOURCES -# PKG_STUB_OBJECTS -#------------------------------------------------------------------------ -AC_DEFUN([TEA_ADD_STUB_SOURCES], [ - vars="$@" - for i in $vars; do - # check for existence - allows for generic/win/unix VPATH - if test ! -f "${srcdir}/$i" -a ! -f "${srcdir}/generic/$i" \ - -a ! -f "${srcdir}/win/$i" -a ! -f "${srcdir}/unix/$i" \ - ; then - AC_MSG_ERROR([could not find stub source file '$i']) - fi - PKG_STUB_SOURCES="$PKG_STUB_SOURCES $i" - # this assumes it is in a VPATH dir - i=`basename $i` - # handle user calling this before or after TEA_SETUP_COMPILER - if test x"${OBJEXT}" != x ; then - j="`echo $i | sed -e 's/\.[[^.]]*$//'`.${OBJEXT}" - else - j="`echo $i | sed -e 's/\.[[^.]]*$//'`.\${OBJEXT}" - fi - PKG_STUB_OBJECTS="$PKG_STUB_OBJECTS $j" - done - AC_SUBST(PKG_STUB_SOURCES) - AC_SUBST(PKG_STUB_OBJECTS) -]) - -#------------------------------------------------------------------------ -# TEA_ADD_TCL_SOURCES -- -# -# Specify one or more Tcl source files. These should be platform -# independent runtime files. -# -# Arguments: -# one or more file names -# -# Results: -# -# Defines and substs the following vars: -# PKG_TCL_SOURCES -#------------------------------------------------------------------------ -AC_DEFUN([TEA_ADD_TCL_SOURCES], [ - vars="$@" - for i in $vars; do - # check for existence, be strict because it is installed - if test ! -f "${srcdir}/$i" ; then - AC_MSG_ERROR([could not find tcl source file '${srcdir}/$i']) - fi - PKG_TCL_SOURCES="$PKG_TCL_SOURCES $i" - done - AC_SUBST(PKG_TCL_SOURCES) -]) - -#------------------------------------------------------------------------ -# TEA_ADD_HEADERS -- -# -# Specify one or more source headers. Users should check for -# the right platform before adding to their list. -# -# Arguments: -# one or more file names -# -# Results: -# -# Defines and substs the following vars: -# PKG_HEADERS -#------------------------------------------------------------------------ -AC_DEFUN([TEA_ADD_HEADERS], [ - vars="$@" - for i in $vars; do - # check for existence, be strict because it is installed - if test ! -f "${srcdir}/$i" ; then - AC_MSG_ERROR([could not find header file '${srcdir}/$i']) - fi - PKG_HEADERS="$PKG_HEADERS $i" - done - AC_SUBST(PKG_HEADERS) -]) - -#------------------------------------------------------------------------ -# TEA_ADD_INCLUDES -- -# -# Specify one or more include dirs. Users should check for -# the right platform before adding to their list. -# -# Arguments: -# one or more file names -# -# Results: -# -# Defines and substs the following vars: -# PKG_INCLUDES -#------------------------------------------------------------------------ -AC_DEFUN([TEA_ADD_INCLUDES], [ - vars="$@" - for i in $vars; do - PKG_INCLUDES="$PKG_INCLUDES $i" - done - AC_SUBST(PKG_INCLUDES) -]) - -#------------------------------------------------------------------------ -# TEA_ADD_LIBS -- -# -# Specify one or more libraries. Users should check for -# the right platform before adding to their list. For Windows, -# libraries provided in "foo.lib" format will be converted to -# "-lfoo" when using GCC (mingw). -# -# Arguments: -# one or more file names -# -# Results: -# -# Defines and substs the following vars: -# PKG_LIBS -#------------------------------------------------------------------------ -AC_DEFUN([TEA_ADD_LIBS], [ - vars="$@" - for i in $vars; do - if test "${TEA_PLATFORM}" = "windows" -a "$GCC" = "yes" ; then - # Convert foo.lib to -lfoo for GCC. No-op if not *.lib - i=`echo "$i" | sed -e 's/^\([[^-]].*\)\.lib[$]/-l\1/i'` - fi - PKG_LIBS="$PKG_LIBS $i" - done - AC_SUBST(PKG_LIBS) -]) - -#------------------------------------------------------------------------ -# TEA_ADD_CFLAGS -- -# -# Specify one or more CFLAGS. Users should check for -# the right platform before adding to their list. -# -# Arguments: -# one or more file names -# -# Results: -# -# Defines and substs the following vars: -# PKG_CFLAGS -#------------------------------------------------------------------------ -AC_DEFUN([TEA_ADD_CFLAGS], [ - PKG_CFLAGS="$PKG_CFLAGS $@" - AC_SUBST(PKG_CFLAGS) -]) - -#------------------------------------------------------------------------ -# TEA_PREFIX -- -# -# Handle the --prefix=... option by defaulting to what Tcl gave -# -# Arguments: -# none -# -# Results: -# -# If --prefix or --exec-prefix was not specified, $prefix and -# $exec_prefix will be set to the values given to Tcl when it was -# configured. -#------------------------------------------------------------------------ -AC_DEFUN([TEA_PREFIX], [ - if test "${prefix}" = "NONE"; then - prefix_default=yes - if test x"${TCL_PREFIX}" != x; then - AC_MSG_NOTICE([--prefix defaulting to TCL_PREFIX ${TCL_PREFIX}]) - prefix=${TCL_PREFIX} - else - AC_MSG_NOTICE([--prefix defaulting to /usr/local]) - prefix=/usr/local - fi - fi - if test "${exec_prefix}" = "NONE" -a x"${prefix_default}" = x"yes" \ - -o x"${exec_prefix_default}" = x"yes" ; then - if test x"${TCL_EXEC_PREFIX}" != x; then - AC_MSG_NOTICE([--exec-prefix defaulting to TCL_EXEC_PREFIX ${TCL_EXEC_PREFIX}]) - exec_prefix=${TCL_EXEC_PREFIX} - else - AC_MSG_NOTICE([--exec-prefix defaulting to ${prefix}]) - exec_prefix=$prefix - fi - fi -]) - -#------------------------------------------------------------------------ -# TEA_SETUP_COMPILER_CC -- -# -# Do compiler checks the way we want. This is just a replacement -# for AC_PROG_CC in TEA configure.in files to make them cleaner. -# -# Arguments: -# none -# -# Results: -# -# Sets up CC var and other standard bits we need to make executables. -#------------------------------------------------------------------------ -AC_DEFUN([TEA_SETUP_COMPILER_CC], [ - # Don't put any macros that use the compiler (e.g. AC_TRY_COMPILE) - # in this macro, they need to go into TEA_SETUP_COMPILER instead. - - # If the user did not set CFLAGS, set it now to keep - # the AC_PROG_CC macro from adding "-g -O2". - if test "${CFLAGS+set}" != "set" ; then - CFLAGS="" - fi - - AC_PROG_CC - AC_PROG_CPP - - AC_PROG_INSTALL - - #-------------------------------------------------------------------- - # Checks to see if the make program sets the $MAKE variable. - #-------------------------------------------------------------------- - - AC_PROG_MAKE_SET - - #-------------------------------------------------------------------- - # Find ranlib - #-------------------------------------------------------------------- - - AC_PROG_RANLIB - - #-------------------------------------------------------------------- - # Determines the correct binary file extension (.o, .obj, .exe etc.) - #-------------------------------------------------------------------- - - AC_OBJEXT - AC_EXEEXT -]) - -#------------------------------------------------------------------------ -# TEA_SETUP_COMPILER -- -# -# Do compiler checks that use the compiler. This must go after -# TEA_SETUP_COMPILER_CC, which does the actual compiler check. -# -# Arguments: -# none -# -# Results: -# -# Sets up CC var and other standard bits we need to make executables. -#------------------------------------------------------------------------ -AC_DEFUN([TEA_SETUP_COMPILER], [ - # Any macros that use the compiler (e.g. AC_TRY_COMPILE) have to go here. - AC_REQUIRE([TEA_SETUP_COMPILER_CC]) - - #------------------------------------------------------------------------ - # If we're using GCC, see if the compiler understands -pipe. If so, use it. - # It makes compiling go faster. (This is only a performance feature.) - #------------------------------------------------------------------------ - - if test -z "$no_pipe" -a -n "$GCC"; then - AC_CACHE_CHECK([if the compiler understands -pipe], - tcl_cv_cc_pipe, [ - hold_cflags=$CFLAGS; CFLAGS="$CFLAGS -pipe" - AC_TRY_COMPILE(,, tcl_cv_cc_pipe=yes, tcl_cv_cc_pipe=no) - CFLAGS=$hold_cflags]) - if test $tcl_cv_cc_pipe = yes; then - CFLAGS="$CFLAGS -pipe" - fi - fi - - #-------------------------------------------------------------------- - # Common compiler flag setup - #-------------------------------------------------------------------- - - AC_C_BIGENDIAN - if test "${TEA_PLATFORM}" = "unix" ; then - TEA_TCL_LINK_LIBS - TEA_MISSING_POSIX_HEADERS - # Let the user call this, because if it triggers, they will - # need a compat/strtod.c that is correct. Users can also - # use Tcl_GetDouble(FromObj) instead. - #TEA_BUGGY_STRTOD - fi -]) - -#------------------------------------------------------------------------ -# TEA_MAKE_LIB -- -# -# Generate a line that can be used to build a shared/unshared library -# in a platform independent manner. -# -# Arguments: -# none -# -# Requires: -# -# Results: -# -# Defines the following vars: -# CFLAGS - Done late here to note disturb other AC macros -# MAKE_LIB - Command to execute to build the Tcl library; -# differs depending on whether or not Tcl is being -# compiled as a shared library. -# MAKE_SHARED_LIB Makefile rule for building a shared library -# MAKE_STATIC_LIB Makefile rule for building a static library -# MAKE_STUB_LIB Makefile rule for building a stub library -#------------------------------------------------------------------------ - -AC_DEFUN([TEA_MAKE_LIB], [ - if test "${TEA_PLATFORM}" = "windows" -a "$GCC" != "yes"; then - MAKE_STATIC_LIB="\${STLIB_LD} -out:\[$]@ \$(PKG_OBJECTS)" - MAKE_SHARED_LIB="\${SHLIB_LD} \${SHLIB_LD_LIBS} \${LDFLAGS_DEFAULT} -out:\[$]@ \$(PKG_OBJECTS)" - MAKE_STUB_LIB="\${STLIB_LD} -out:\[$]@ \$(PKG_STUB_OBJECTS)" - else - MAKE_STATIC_LIB="\${STLIB_LD} \[$]@ \$(PKG_OBJECTS)" - MAKE_SHARED_LIB="\${SHLIB_LD} -o \[$]@ \$(PKG_OBJECTS) \${SHLIB_LD_LIBS}" - MAKE_STUB_LIB="\${STLIB_LD} \[$]@ \$(PKG_STUB_OBJECTS)" - fi - - if test "${SHARED_BUILD}" = "1" ; then - MAKE_LIB="${MAKE_SHARED_LIB} " - else - MAKE_LIB="${MAKE_STATIC_LIB} " - fi - - #-------------------------------------------------------------------- - # Shared libraries and static libraries have different names. - # Use the double eval to make sure any variables in the suffix is - # substituted. (@@@ Might not be necessary anymore) - #-------------------------------------------------------------------- - - if test "${TEA_PLATFORM}" = "windows" ; then - if test "${SHARED_BUILD}" = "1" ; then - # We force the unresolved linking of symbols that are really in - # the private libraries of Tcl and Tk. - SHLIB_LD_LIBS="${SHLIB_LD_LIBS} \"`${CYGPATH} ${TCL_BIN_DIR}/${TCL_STUB_LIB_FILE}`\"" - if test x"${TK_BIN_DIR}" != x ; then - SHLIB_LD_LIBS="${SHLIB_LD_LIBS} \"`${CYGPATH} ${TK_BIN_DIR}/${TK_STUB_LIB_FILE}`\"" - fi - eval eval "PKG_LIB_FILE=${PACKAGE_NAME}${SHARED_LIB_SUFFIX}" - else - eval eval "PKG_LIB_FILE=${PACKAGE_NAME}${UNSHARED_LIB_SUFFIX}" - fi - # Some packages build their own stubs libraries - eval eval "PKG_STUB_LIB_FILE=${PACKAGE_NAME}stub${UNSHARED_LIB_SUFFIX}" - if test "$GCC" = "yes"; then - PKG_STUB_LIB_FILE=lib${PKG_STUB_LIB_FILE} - fi - # These aren't needed on Windows (either MSVC or gcc) - RANLIB=: - RANLIB_STUB=: - else - RANLIB_STUB="${RANLIB}" - if test "${SHARED_BUILD}" = "1" ; then - SHLIB_LD_LIBS="${SHLIB_LD_LIBS} ${TCL_STUB_LIB_SPEC}" - if test x"${TK_BIN_DIR}" != x ; then - SHLIB_LD_LIBS="${SHLIB_LD_LIBS} ${TK_STUB_LIB_SPEC}" - fi - eval eval "PKG_LIB_FILE=lib${PACKAGE_NAME}${SHARED_LIB_SUFFIX}" - RANLIB=: - else - eval eval "PKG_LIB_FILE=lib${PACKAGE_NAME}${UNSHARED_LIB_SUFFIX}" - fi - # Some packages build their own stubs libraries - eval eval "PKG_STUB_LIB_FILE=lib${PACKAGE_NAME}stub${UNSHARED_LIB_SUFFIX}" - fi - - # These are escaped so that only CFLAGS is picked up at configure time. - # The other values will be substituted at make time. - CFLAGS="${CFLAGS} \${CFLAGS_DEFAULT} \${CFLAGS_WARNING}" - if test "${SHARED_BUILD}" = "1" ; then - CFLAGS="${CFLAGS} \${SHLIB_CFLAGS}" - fi - - AC_SUBST(MAKE_LIB) - AC_SUBST(MAKE_SHARED_LIB) - AC_SUBST(MAKE_STATIC_LIB) - AC_SUBST(MAKE_STUB_LIB) - AC_SUBST(RANLIB_STUB) -]) - -#------------------------------------------------------------------------ -# TEA_LIB_SPEC -- -# -# Compute the name of an existing object library located in libdir -# from the given base name and produce the appropriate linker flags. -# -# Arguments: -# basename The base name of the library without version -# numbers, extensions, or "lib" prefixes. -# extra_dir Extra directory in which to search for the -# library. This location is used first, then -# $prefix/$exec-prefix, then some defaults. -# -# Requires: -# TEA_INIT and TEA_PREFIX must be called first. -# -# Results: -# -# Defines the following vars: -# ${basename}_LIB_NAME The computed library name. -# ${basename}_LIB_SPEC The computed linker flags. -#------------------------------------------------------------------------ - -AC_DEFUN([TEA_LIB_SPEC], [ - AC_MSG_CHECKING([for $1 library]) - - # Look in exec-prefix for the library (defined by TEA_PREFIX). - - tea_lib_name_dir="${exec_prefix}/lib" - - # Or in a user-specified location. - - if test x"$2" != x ; then - tea_extra_lib_dir=$2 - else - tea_extra_lib_dir=NONE - fi - - for i in \ - `ls -dr ${tea_extra_lib_dir}/$1[[0-9]]*.lib 2>/dev/null ` \ - `ls -dr ${tea_extra_lib_dir}/lib$1[[0-9]]* 2>/dev/null ` \ - `ls -dr ${tea_lib_name_dir}/$1[[0-9]]*.lib 2>/dev/null ` \ - `ls -dr ${tea_lib_name_dir}/lib$1[[0-9]]* 2>/dev/null ` \ - `ls -dr /usr/lib/$1[[0-9]]*.lib 2>/dev/null ` \ - `ls -dr /usr/lib/lib$1[[0-9]]* 2>/dev/null ` \ - `ls -dr /usr/local/lib/$1[[0-9]]*.lib 2>/dev/null ` \ - `ls -dr /usr/local/lib/lib$1[[0-9]]* 2>/dev/null ` ; do - if test -f "$i" ; then - tea_lib_name_dir=`dirname $i` - $1_LIB_NAME=`basename $i` - $1_LIB_PATH_NAME=$i - break - fi - done - - if test "${TEA_PLATFORM}" = "windows"; then - $1_LIB_SPEC=\"`${CYGPATH} ${$1_LIB_PATH_NAME} 2>/dev/null`\" - else - # Strip off the leading "lib" and trailing ".a" or ".so" - - tea_lib_name_lib=`echo ${$1_LIB_NAME}|sed -e 's/^lib//' -e 's/\.[[^.]]*$//' -e 's/\.so.*//'` - $1_LIB_SPEC="-L${tea_lib_name_dir} -l${tea_lib_name_lib}" - fi - - if test "x${$1_LIB_NAME}" = x ; then - AC_MSG_ERROR([not found]) - else - AC_MSG_RESULT([${$1_LIB_SPEC}]) - fi -]) - -#------------------------------------------------------------------------ -# TEA_PRIVATE_TCL_HEADERS -- -# -# Locate the private Tcl include files -# -# Arguments: -# -# Requires: -# TCL_SRC_DIR Assumes that TEA_LOAD_TCLCONFIG has -# already been called. -# -# Results: -# -# Substs the following vars: -# TCL_TOP_DIR_NATIVE -# TCL_INCLUDES -#------------------------------------------------------------------------ - -AC_DEFUN([TEA_PRIVATE_TCL_HEADERS], [ - # Allow for --with-tclinclude to take effect and define ${ac_cv_c_tclh} - AC_REQUIRE([TEA_PUBLIC_TCL_HEADERS]) - AC_MSG_CHECKING([for Tcl private include files]) - - TCL_SRC_DIR_NATIVE=`${CYGPATH} ${TCL_SRC_DIR}` - TCL_TOP_DIR_NATIVE=\"${TCL_SRC_DIR_NATIVE}\" - - # Check to see if tclPort.h isn't already with the public headers - # Don't look for tclInt.h because that resides with tcl.h in the core - # sources, but the Port headers are in a different directory - if test "${TEA_PLATFORM}" = "windows" -a \ - -f "${ac_cv_c_tclh}/tclWinPort.h"; then - result="private headers found with public headers" - elif test "${TEA_PLATFORM}" = "unix" -a \ - -f "${ac_cv_c_tclh}/tclUnixPort.h"; then - result="private headers found with public headers" - else - TCL_GENERIC_DIR_NATIVE=\"${TCL_SRC_DIR_NATIVE}/generic\" - if test "${TEA_PLATFORM}" = "windows"; then - TCL_PLATFORM_DIR_NATIVE=\"${TCL_SRC_DIR_NATIVE}/win\" - else - TCL_PLATFORM_DIR_NATIVE=\"${TCL_SRC_DIR_NATIVE}/unix\" - fi - # Overwrite the previous TCL_INCLUDES as this should capture both - # public and private headers in the same set. - # We want to ensure these are substituted so as not to require - # any *_NATIVE vars be defined in the Makefile - TCL_INCLUDES="-I${TCL_GENERIC_DIR_NATIVE} -I${TCL_PLATFORM_DIR_NATIVE}" - if test "`uname -s`" = "Darwin"; then - # If Tcl was built as a framework, attempt to use - # the framework's Headers and PrivateHeaders directories - case ${TCL_DEFS} in - *TCL_FRAMEWORK*) - if test -d "${TCL_BIN_DIR}/Headers" -a \ - -d "${TCL_BIN_DIR}/PrivateHeaders"; then - TCL_INCLUDES="-I\"${TCL_BIN_DIR}/Headers\" -I\"${TCL_BIN_DIR}/PrivateHeaders\" ${TCL_INCLUDES}" - else - TCL_INCLUDES="${TCL_INCLUDES} ${TCL_INCLUDE_SPEC} `echo "${TCL_INCLUDE_SPEC}" | sed -e 's/Headers/PrivateHeaders/'`" - fi - ;; - esac - result="Using ${TCL_INCLUDES}" - else - if test ! -f "${TCL_SRC_DIR}/generic/tclInt.h" ; then - AC_MSG_ERROR([Cannot find private header tclInt.h in ${TCL_SRC_DIR}]) - fi - result="Using srcdir found in tclConfig.sh: ${TCL_SRC_DIR}" - fi - fi - - AC_SUBST(TCL_TOP_DIR_NATIVE) - - AC_SUBST(TCL_INCLUDES) - AC_MSG_RESULT([${result}]) -]) - -#------------------------------------------------------------------------ -# TEA_PUBLIC_TCL_HEADERS -- -# -# Locate the installed public Tcl header files -# -# Arguments: -# None. -# -# Requires: -# CYGPATH must be set -# -# Results: -# -# Adds a --with-tclinclude switch to configure. -# Result is cached. -# -# Substs the following vars: -# TCL_INCLUDES -#------------------------------------------------------------------------ - -AC_DEFUN([TEA_PUBLIC_TCL_HEADERS], [ - AC_MSG_CHECKING([for Tcl public headers]) - - AC_ARG_WITH(tclinclude, [ --with-tclinclude directory containing the public Tcl header files], with_tclinclude=${withval}) - - AC_CACHE_VAL(ac_cv_c_tclh, [ - # Use the value from --with-tclinclude, if it was given - - if test x"${with_tclinclude}" != x ; then - if test -f "${with_tclinclude}/tcl.h" ; then - ac_cv_c_tclh=${with_tclinclude} - else - AC_MSG_ERROR([${with_tclinclude} directory does not contain tcl.h]) - fi - else - list="" - if test "`uname -s`" = "Darwin"; then - # If Tcl was built as a framework, attempt to use - # the framework's Headers directory - case ${TCL_DEFS} in - *TCL_FRAMEWORK*) - list="`ls -d ${TCL_BIN_DIR}/Headers 2>/dev/null`" - ;; - esac - fi - - # Look in the source dir only if Tcl is not installed, - # and in that situation, look there before installed locations. - if test -f "${TCL_BIN_DIR}/Makefile" ; then - list="$list `ls -d ${TCL_SRC_DIR}/generic 2>/dev/null`" - fi - - # Check order: pkg --prefix location, Tcl's --prefix location, - # relative to directory of tclConfig.sh. - - eval "temp_includedir=${includedir}" - list="$list \ - `ls -d ${temp_includedir} 2>/dev/null` \ - `ls -d ${TCL_PREFIX}/include 2>/dev/null` \ - `ls -d ${TCL_BIN_DIR}/../include 2>/dev/null`" - if test "${TEA_PLATFORM}" != "windows" -o "$GCC" = "yes"; then - list="$list /usr/local/include /usr/include" - if test x"${TCL_INCLUDE_SPEC}" != x ; then - d=`echo "${TCL_INCLUDE_SPEC}" | sed -e 's/^-I//'` - list="$list `ls -d ${d} 2>/dev/null`" - fi - fi - for i in $list ; do - if test -f "$i/tcl.h" ; then - ac_cv_c_tclh=$i - break - fi - done - fi - ]) - - # Print a message based on how we determined the include path - - if test x"${ac_cv_c_tclh}" = x ; then - AC_MSG_ERROR([tcl.h not found. Please specify its location with --with-tclinclude]) - else - AC_MSG_RESULT([${ac_cv_c_tclh}]) - fi - - # Convert to a native path and substitute into the output files. - - INCLUDE_DIR_NATIVE=`${CYGPATH} ${ac_cv_c_tclh}` - - TCL_INCLUDES=-I\"${INCLUDE_DIR_NATIVE}\" - - AC_SUBST(TCL_INCLUDES) -]) - -#------------------------------------------------------------------------ -# TEA_PRIVATE_TK_HEADERS -- -# -# Locate the private Tk include files -# -# Arguments: -# -# Requires: -# TK_SRC_DIR Assumes that TEA_LOAD_TKCONFIG has -# already been called. -# -# Results: -# -# Substs the following vars: -# TK_INCLUDES -#------------------------------------------------------------------------ - -AC_DEFUN([TEA_PRIVATE_TK_HEADERS], [ - # Allow for --with-tkinclude to take effect and define ${ac_cv_c_tkh} - AC_REQUIRE([TEA_PUBLIC_TK_HEADERS]) - AC_MSG_CHECKING([for Tk private include files]) - - TK_SRC_DIR_NATIVE=`${CYGPATH} ${TK_SRC_DIR}` - TK_TOP_DIR_NATIVE=\"${TK_SRC_DIR_NATIVE}\" - - # Check to see if tkPort.h isn't already with the public headers - # Don't look for tkInt.h because that resides with tk.h in the core - # sources, but the Port headers are in a different directory - if test "${TEA_PLATFORM}" = "windows" -a \ - -f "${ac_cv_c_tkh}/tkWinPort.h"; then - result="private headers found with public headers" - elif test "${TEA_PLATFORM}" = "unix" -a \ - -f "${ac_cv_c_tkh}/tkUnixPort.h"; then - result="private headers found with public headers" - else - TK_GENERIC_DIR_NATIVE=\"${TK_SRC_DIR_NATIVE}/generic\" - TK_XLIB_DIR_NATIVE=\"${TK_SRC_DIR_NATIVE}/xlib\" - if test "${TEA_PLATFORM}" = "windows"; then - TK_PLATFORM_DIR_NATIVE=\"${TK_SRC_DIR_NATIVE}/win\" - else - TK_PLATFORM_DIR_NATIVE=\"${TK_SRC_DIR_NATIVE}/unix\" - fi - # Overwrite the previous TK_INCLUDES as this should capture both - # public and private headers in the same set. - # We want to ensure these are substituted so as not to require - # any *_NATIVE vars be defined in the Makefile - TK_INCLUDES="-I${TK_GENERIC_DIR_NATIVE} -I${TK_PLATFORM_DIR_NATIVE}" - # Detect and add ttk subdir - if test -d "${TK_SRC_DIR}/generic/ttk"; then - TK_INCLUDES="${TK_INCLUDES} -I\"${TK_SRC_DIR_NATIVE}/generic/ttk\"" - fi - if test "${TEA_WINDOWINGSYSTEM}" != "x11"; then - TK_INCLUDES="${TK_INCLUDES} -I\"${TK_XLIB_DIR_NATIVE}\"" - fi - if test "${TEA_WINDOWINGSYSTEM}" = "aqua"; then - TK_INCLUDES="${TK_INCLUDES} -I\"${TK_SRC_DIR_NATIVE}/macosx\"" - fi - if test "`uname -s`" = "Darwin"; then - # If Tk was built as a framework, attempt to use - # the framework's Headers and PrivateHeaders directories - case ${TK_DEFS} in - *TK_FRAMEWORK*) - if test -d "${TK_BIN_DIR}/Headers" -a \ - -d "${TK_BIN_DIR}/PrivateHeaders"; then - TK_INCLUDES="-I\"${TK_BIN_DIR}/Headers\" -I\"${TK_BIN_DIR}/PrivateHeaders\" ${TK_INCLUDES}" - else - TK_INCLUDES="${TK_INCLUDES} ${TK_INCLUDE_SPEC} `echo "${TK_INCLUDE_SPEC}" | sed -e 's/Headers/PrivateHeaders/'`" - fi - ;; - esac - result="Using ${TK_INCLUDES}" - else - if test ! -f "${TK_SRC_DIR}/generic/tkInt.h" ; then - AC_MSG_ERROR([Cannot find private header tkInt.h in ${TK_SRC_DIR}]) - fi - result="Using srcdir found in tkConfig.sh: ${TK_SRC_DIR}" - fi - fi - - AC_SUBST(TK_TOP_DIR_NATIVE) - AC_SUBST(TK_XLIB_DIR_NATIVE) - - AC_SUBST(TK_INCLUDES) - AC_MSG_RESULT([${result}]) -]) - -#------------------------------------------------------------------------ -# TEA_PUBLIC_TK_HEADERS -- -# -# Locate the installed public Tk header files -# -# Arguments: -# None. -# -# Requires: -# CYGPATH must be set -# -# Results: -# -# Adds a --with-tkinclude switch to configure. -# Result is cached. -# -# Substs the following vars: -# TK_INCLUDES -#------------------------------------------------------------------------ - -AC_DEFUN([TEA_PUBLIC_TK_HEADERS], [ - AC_MSG_CHECKING([for Tk public headers]) - - AC_ARG_WITH(tkinclude, [ --with-tkinclude directory containing the public Tk header files], with_tkinclude=${withval}) - - AC_CACHE_VAL(ac_cv_c_tkh, [ - # Use the value from --with-tkinclude, if it was given - - if test x"${with_tkinclude}" != x ; then - if test -f "${with_tkinclude}/tk.h" ; then - ac_cv_c_tkh=${with_tkinclude} - else - AC_MSG_ERROR([${with_tkinclude} directory does not contain tk.h]) - fi - else - list="" - if test "`uname -s`" = "Darwin"; then - # If Tk was built as a framework, attempt to use - # the framework's Headers directory. - case ${TK_DEFS} in - *TK_FRAMEWORK*) - list="`ls -d ${TK_BIN_DIR}/Headers 2>/dev/null`" - ;; - esac - fi - - # Look in the source dir only if Tk is not installed, - # and in that situation, look there before installed locations. - if test -f "${TK_BIN_DIR}/Makefile" ; then - list="$list `ls -d ${TK_SRC_DIR}/generic 2>/dev/null`" - fi - - # Check order: pkg --prefix location, Tk's --prefix location, - # relative to directory of tkConfig.sh, Tcl's --prefix location, - # relative to directory of tclConfig.sh. - - eval "temp_includedir=${includedir}" - list="$list \ - `ls -d ${temp_includedir} 2>/dev/null` \ - `ls -d ${TK_PREFIX}/include 2>/dev/null` \ - `ls -d ${TK_BIN_DIR}/../include 2>/dev/null` \ - `ls -d ${TCL_PREFIX}/include 2>/dev/null` \ - `ls -d ${TCL_BIN_DIR}/../include 2>/dev/null`" - if test "${TEA_PLATFORM}" != "windows" -o "$GCC" = "yes"; then - list="$list /usr/local/include /usr/include" - if test x"${TK_INCLUDE_SPEC}" != x ; then - d=`echo "${TK_INCLUDE_SPEC}" | sed -e 's/^-I//'` - list="$list `ls -d ${d} 2>/dev/null`" - fi - fi - for i in $list ; do - if test -f "$i/tk.h" ; then - ac_cv_c_tkh=$i - break - fi - done - fi - ]) - - # Print a message based on how we determined the include path - - if test x"${ac_cv_c_tkh}" = x ; then - AC_MSG_ERROR([tk.h not found. Please specify its location with --with-tkinclude]) - else - AC_MSG_RESULT([${ac_cv_c_tkh}]) - fi - - # Convert to a native path and substitute into the output files. - - INCLUDE_DIR_NATIVE=`${CYGPATH} ${ac_cv_c_tkh}` - - TK_INCLUDES=-I\"${INCLUDE_DIR_NATIVE}\" - - AC_SUBST(TK_INCLUDES) - - if test "${TEA_WINDOWINGSYSTEM}" != "x11"; then - # On Windows and Aqua, we need the X compat headers - AC_MSG_CHECKING([for X11 header files]) - if test ! -r "${INCLUDE_DIR_NATIVE}/X11/Xlib.h"; then - INCLUDE_DIR_NATIVE="`${CYGPATH} ${TK_SRC_DIR}/xlib`" - TK_XINCLUDES=-I\"${INCLUDE_DIR_NATIVE}\" - AC_SUBST(TK_XINCLUDES) - fi - AC_MSG_RESULT([${INCLUDE_DIR_NATIVE}]) - fi -]) - -#------------------------------------------------------------------------ -# TEA_PATH_CONFIG -- -# -# Locate the ${1}Config.sh file and perform a sanity check on -# the ${1} compile flags. These are used by packages like -# [incr Tk] that load *Config.sh files from more than Tcl and Tk. -# -# Arguments: -# none -# -# Results: -# -# Adds the following arguments to configure: -# --with-$1=... -# -# Defines the following vars: -# $1_BIN_DIR Full path to the directory containing -# the $1Config.sh file -#------------------------------------------------------------------------ - -AC_DEFUN([TEA_PATH_CONFIG], [ - # - # Ok, lets find the $1 configuration - # First, look for one uninstalled. - # the alternative search directory is invoked by --with-$1 - # - - if test x"${no_$1}" = x ; then - # we reset no_$1 in case something fails here - no_$1=true - AC_ARG_WITH($1, [ --with-$1 directory containing $1 configuration ($1Config.sh)], with_$1config=${withval}) - AC_MSG_CHECKING([for $1 configuration]) - AC_CACHE_VAL(ac_cv_c_$1config,[ - - # First check to see if --with-$1 was specified. - if test x"${with_$1config}" != x ; then - case ${with_$1config} in - */$1Config.sh ) - if test -f ${with_$1config}; then - AC_MSG_WARN([--with-$1 argument should refer to directory containing $1Config.sh, not to $1Config.sh itself]) - with_$1config=`echo ${with_$1config} | sed 's!/$1Config\.sh$!!'` - fi;; - esac - if test -f "${with_$1config}/$1Config.sh" ; then - ac_cv_c_$1config=`(cd ${with_$1config}; pwd)` - else - AC_MSG_ERROR([${with_$1config} directory doesn't contain $1Config.sh]) - fi - fi - - # then check for a private $1 installation - if test x"${ac_cv_c_$1config}" = x ; then - for i in \ - ../$1 \ - `ls -dr ../$1*[[0-9]].[[0-9]]*.[[0-9]]* 2>/dev/null` \ - `ls -dr ../$1*[[0-9]].[[0-9]][[0-9]] 2>/dev/null` \ - `ls -dr ../$1*[[0-9]].[[0-9]] 2>/dev/null` \ - `ls -dr ../$1*[[0-9]].[[0-9]]* 2>/dev/null` \ - ../../$1 \ - `ls -dr ../../$1*[[0-9]].[[0-9]]*.[[0-9]]* 2>/dev/null` \ - `ls -dr ../../$1*[[0-9]].[[0-9]][[0-9]] 2>/dev/null` \ - `ls -dr ../../$1*[[0-9]].[[0-9]] 2>/dev/null` \ - `ls -dr ../../$1*[[0-9]].[[0-9]]* 2>/dev/null` \ - ../../../$1 \ - `ls -dr ../../../$1*[[0-9]].[[0-9]]*.[[0-9]]* 2>/dev/null` \ - `ls -dr ../../../$1*[[0-9]].[[0-9]][[0-9]] 2>/dev/null` \ - `ls -dr ../../../$1*[[0-9]].[[0-9]] 2>/dev/null` \ - `ls -dr ../../../$1*[[0-9]].[[0-9]]* 2>/dev/null` \ - ${srcdir}/../$1 \ - `ls -dr ${srcdir}/../$1*[[0-9]].[[0-9]]*.[[0-9]]* 2>/dev/null` \ - `ls -dr ${srcdir}/../$1*[[0-9]].[[0-9]][[0-9]] 2>/dev/null` \ - `ls -dr ${srcdir}/../$1*[[0-9]].[[0-9]] 2>/dev/null` \ - `ls -dr ${srcdir}/../$1*[[0-9]].[[0-9]]* 2>/dev/null` \ - ; do - if test -f "$i/$1Config.sh" ; then - ac_cv_c_$1config=`(cd $i; pwd)` - break - fi - if test -f "$i/unix/$1Config.sh" ; then - ac_cv_c_$1config=`(cd $i/unix; pwd)` - break - fi - done - fi - - # check in a few common install locations - if test x"${ac_cv_c_$1config}" = x ; then - for i in `ls -d ${libdir} 2>/dev/null` \ - `ls -d ${exec_prefix}/lib 2>/dev/null` \ - `ls -d ${prefix}/lib 2>/dev/null` \ - `ls -d /usr/local/lib 2>/dev/null` \ - `ls -d /usr/contrib/lib 2>/dev/null` \ - `ls -d /usr/lib 2>/dev/null` \ - ; do - if test -f "$i/$1Config.sh" ; then - ac_cv_c_$1config=`(cd $i; pwd)` - break - fi - done - fi - ]) - - if test x"${ac_cv_c_$1config}" = x ; then - $1_BIN_DIR="# no $1 configs found" - AC_MSG_WARN([Cannot find $1 configuration definitions]) - exit 0 - else - no_$1= - $1_BIN_DIR=${ac_cv_c_$1config} - AC_MSG_RESULT([found $$1_BIN_DIR/$1Config.sh]) - fi - fi -]) - -#------------------------------------------------------------------------ -# TEA_LOAD_CONFIG -- -# -# Load the $1Config.sh file -# -# Arguments: -# -# Requires the following vars to be set: -# $1_BIN_DIR -# -# Results: -# -# Subst the following vars: -# $1_SRC_DIR -# $1_LIB_FILE -# $1_LIB_SPEC -# -#------------------------------------------------------------------------ - -AC_DEFUN([TEA_LOAD_CONFIG], [ - AC_MSG_CHECKING([for existence of ${$1_BIN_DIR}/$1Config.sh]) - - if test -f "${$1_BIN_DIR}/$1Config.sh" ; then - AC_MSG_RESULT([loading]) - . "${$1_BIN_DIR}/$1Config.sh" - else - AC_MSG_RESULT([file not found]) - fi - - # - # If the $1_BIN_DIR is the build directory (not the install directory), - # then set the common variable name to the value of the build variables. - # For example, the variable $1_LIB_SPEC will be set to the value - # of $1_BUILD_LIB_SPEC. An extension should make use of $1_LIB_SPEC - # instead of $1_BUILD_LIB_SPEC since it will work with both an - # installed and uninstalled version of Tcl. - # - - if test -f "${$1_BIN_DIR}/Makefile" ; then - AC_MSG_WARN([Found Makefile - using build library specs for $1]) - $1_LIB_SPEC=${$1_BUILD_LIB_SPEC} - $1_STUB_LIB_SPEC=${$1_BUILD_STUB_LIB_SPEC} - $1_STUB_LIB_PATH=${$1_BUILD_STUB_LIB_PATH} - fi - - AC_SUBST($1_VERSION) - AC_SUBST($1_BIN_DIR) - AC_SUBST($1_SRC_DIR) - - AC_SUBST($1_LIB_FILE) - AC_SUBST($1_LIB_SPEC) - - AC_SUBST($1_STUB_LIB_FILE) - AC_SUBST($1_STUB_LIB_SPEC) - AC_SUBST($1_STUB_LIB_PATH) -]) - -#------------------------------------------------------------------------ -# TEA_PATH_CELIB -- -# -# Locate Keuchel's celib emulation layer for targeting Win/CE -# -# Arguments: -# none -# -# Results: -# -# Adds the following arguments to configure: -# --with-celib=... -# -# Defines the following vars: -# CELIB_DIR Full path to the directory containing -# the include and platform lib files -#------------------------------------------------------------------------ - -AC_DEFUN([TEA_PATH_CELIB], [ - # First, look for one uninstalled. - # the alternative search directory is invoked by --with-celib - - if test x"${no_celib}" = x ; then - # we reset no_celib in case something fails here - no_celib=true - AC_ARG_WITH(celib,[ --with-celib=DIR use Windows/CE support library from DIR], with_celibconfig=${withval}) - AC_MSG_CHECKING([for Windows/CE celib directory]) - AC_CACHE_VAL(ac_cv_c_celibconfig,[ - # First check to see if --with-celibconfig was specified. - if test x"${with_celibconfig}" != x ; then - if test -d "${with_celibconfig}/inc" ; then - ac_cv_c_celibconfig=`(cd ${with_celibconfig}; pwd)` - else - AC_MSG_ERROR([${with_celibconfig} directory doesn't contain inc directory]) - fi - fi - - # then check for a celib library - if test x"${ac_cv_c_celibconfig}" = x ; then - for i in \ - ../celib-palm-3.0 \ - ../celib \ - ../../celib-palm-3.0 \ - ../../celib \ - `ls -dr ../celib-*3.[[0-9]]* 2>/dev/null` \ - ${srcdir}/../celib-palm-3.0 \ - ${srcdir}/../celib \ - `ls -dr ${srcdir}/../celib-*3.[[0-9]]* 2>/dev/null` \ - ; do - if test -d "$i/inc" ; then - ac_cv_c_celibconfig=`(cd $i; pwd)` - break - fi - done - fi - ]) - if test x"${ac_cv_c_celibconfig}" = x ; then - AC_MSG_ERROR([Cannot find celib support library directory]) - else - no_celib= - CELIB_DIR=${ac_cv_c_celibconfig} - CELIB_DIR=`echo "$CELIB_DIR" | sed -e 's!\\\!/!g'` - AC_MSG_RESULT([found $CELIB_DIR]) - fi - fi -]) - - -# Local Variables: -# mode: autoconf -# End: Index: tests/all.tcl ================================================================== --- tests/all.tcl +++ tests/all.tcl @@ -6,10 +6,12 @@ # # Copyright (c) 1998-2000 by Ajuba Solutions. # All rights reserved. # # RCS: @(#) $Id: all.tcl,v 1.5 2000/08/15 18:45:01 hobbs Exp $ + +set auto_path [linsert $auto_path 0 [file normalize [file join [file dirname [info script]] ..]]] if {[lsearch [namespace children] ::tcltest] == -1} { package require tcltest namespace import ::tcltest::* } Index: tests/ciphers.test ================================================================== --- tests/ciphers.test +++ tests/ciphers.test @@ -15,12 +15,10 @@ package require tcltest namespace import ::tcltest::* } # The build dir is added as the first element of $PATH -set auto_path [linsert $auto_path 0 [lindex [split $env(PATH) ";:"] 0]] - package require tls # One of these should == 1, depending on what type of ssl library # tls was compiled against. (RSA BSAFE SSL-C or OpenSSL). # Index: tests/keytest1.tcl ================================================================== --- tests/keytest1.tcl +++ tests/keytest1.tcl @@ -1,23 +1,26 @@ -#!/bin/sh -# The next line is executed by /bin/sh, but not tcl \ -exec tclsh "$0" ${1+"$@"} - -package require tls - -proc creadable {s} { - puts "LINE=[gets $s]" - after 2000 - exit -} - -proc myserv {s args} { - fileevent $s readable [list creadable $s] -} - -tls::misc req 1024 $keyfile $certfile [list C CCC ST STTT L LLLL O OOOO OU OUUUU CN CNNNN Email some@email.com days 730 serial 12] - -tls::socket -keyfile $keyfile -certfile $certfile -server myserv 12300 - -puts "Now run keytest2.tcl" -vwait forever - +#!/bin/sh +# The next line is executed by /bin/sh, but not tcl \ +exec tclsh "$0" ${1+"$@"} + +set auto_path [linsert $auto_path 0 [file normalize [file join [file dirname [info script]] ..]]] +package require tls + +proc creadable {s} { + puts "LINE=[gets $s]" + after 2000 + exit +} + +proc myserv {s args} { + fileevent $s readable [list creadable $s] +} + +close [file tempfile keyfile] +close [file tempfile certfile] +tls::misc req 1024 $keyfile $certfile [list C CCC ST STTT L LLLL O OOOO OU OUUUU CN CNNNN Email some@email.com days 730 serial 12] + +tls::socket -keyfile $keyfile -certfile $certfile -server myserv 12300 + +puts "Now run keytest2.tcl" +vwait forever + Index: tests/keytest2.tcl ================================================================== --- tests/keytest2.tcl +++ tests/keytest2.tcl @@ -1,8 +1,10 @@ +#! /usr/bin/env tclsh + +set auto_path [linsert $auto_path 0 [file normalize [file join [file dirname [info script]] ..]]] package require tls set s [tls::socket 127.0.0.1 12300] puts $s "A line" flush $s puts [join [tls::status $s] \n] exit - Index: tests/oldTests/tls.tcl ================================================================== --- tests/oldTests/tls.tcl +++ tests/oldTests/tls.tcl @@ -1,10 +1,8 @@ # # Copyright (C) 1997-2000 Matt Newman # -# $Header: /home/rkeene/tmp/cvs2fossil/../tcltls/tls/tls/tests/oldTests/tls.tcl,v 1.2 2000/06/06 18:24:33 aborr Exp $ -# set dir [file dirname [info script]] regsub {\.} [info tclversion] {} vshort if {$tcl_platform(platform) == "windows"} { if {[info exists tcl_platform(debug)]} { load $dir/../win/Debug$vshort/tls.dll Index: tests/oldTests/tlsAuto.tcl ================================================================== --- tests/oldTests/tlsAuto.tcl +++ tests/oldTests/tlsAuto.tcl @@ -1,10 +1,8 @@ # # Copyright (C) 1997-2000 Matt Newman # -# $Header: /home/rkeene/tmp/cvs2fossil/../tcltls/tls/tls/tests/oldTests/tlsAuto.tcl,v 1.1 2000/06/06 18:13:20 aborr Exp $ -# set dir [file dirname [info script]] cd $dir source tls.tcl Index: tests/oldTests/tlsBlocking.tcl ================================================================== --- tests/oldTests/tlsBlocking.tcl +++ tests/oldTests/tlsBlocking.tcl @@ -1,10 +1,8 @@ # # Copyright (C) 1997-2000 Matt Newman # -# $Header: /home/rkeene/tmp/cvs2fossil/../tcltls/tls/tls/tests/oldTests/tlsBlocking.tcl,v 1.1 2000/06/06 18:13:21 aborr Exp $ -# set dir [file dirname [info script]] cd $dir source tls.tcl Index: tests/oldTests/tlsCiphers.tcl ================================================================== --- tests/oldTests/tlsCiphers.tcl +++ tests/oldTests/tlsCiphers.tcl @@ -1,10 +1,8 @@ # # Copyright (C) 1997-2000 Matt Newman # -# $Header: /home/rkeene/tmp/cvs2fossil/../tcltls/tls/tls/tests/oldTests/tlsCiphers.tcl,v 1.1 2000/06/06 18:13:21 aborr Exp $ -# set dir [file dirname [info script]] cd $dir source tls.tcl Index: tests/oldTests/tlsHttp.tcl ================================================================== --- tests/oldTests/tlsHttp.tcl +++ tests/oldTests/tlsHttp.tcl @@ -1,10 +1,8 @@ # # Copyright (C) 1997-2000 Matt Newman # -# $Header: /home/rkeene/tmp/cvs2fossil/../tcltls/tls/tls/tests/oldTests/tlsHttp.tcl,v 1.1 2000/06/06 18:13:21 aborr Exp $ -# package require base64 set dir [file dirname [info script]] cd $dir source tls.tcl Index: tests/oldTests/tlsSrv.tcl ================================================================== --- tests/oldTests/tlsSrv.tcl +++ tests/oldTests/tlsSrv.tcl @@ -1,10 +1,8 @@ # # Copyright (C) 1997-2000 Matt Newman # -# $Header: /home/rkeene/tmp/cvs2fossil/../tcltls/tls/tls/tests/oldTests/tlsSrv.tcl,v 1.1 2000/06/06 18:13:21 aborr Exp $ -# # Sample Tls-enabled server # set dir [file dirname [info script]] cd $dir source tls.tcl Index: tests/oldTests/tlsSrv2.tcl ================================================================== --- tests/oldTests/tlsSrv2.tcl +++ tests/oldTests/tlsSrv2.tcl @@ -1,10 +1,8 @@ # # Copyright (C) 1997-2000 Matt Newman # -# $Header: /home/rkeene/tmp/cvs2fossil/../tcltls/tls/tls/tests/oldTests/tlsSrv2.tcl,v 1.1 2000/06/06 18:13:21 aborr Exp $ -# # Sample Tls-enabled server # set dir [file dirname [info script]] cd $dir source tls.tcl Index: tests/oldTests/tlsUpload.tcl ================================================================== --- tests/oldTests/tlsUpload.tcl +++ tests/oldTests/tlsUpload.tcl @@ -1,10 +1,8 @@ # # Copyright (C) 1997-2000 Matt Newman # -# $Header: /home/rkeene/tmp/cvs2fossil/../tcltls/tls/tls/tests/oldTests/tlsUpload.tcl,v 1.1 2000/06/06 18:13:21 aborr Exp $ -# set dir [file dirname [info script]] cd $dir source tls.tcl Index: tests/tlsIO.test ================================================================== --- tests/tlsIO.test +++ tests/tlsIO.test @@ -68,13 +68,12 @@ package require tcltest namespace import -force ::tcltest::* } # The build dir is added as the first element of $PATH -set auto_path [linsert $auto_path 0 [lindex [split $env(PATH) ";:"] 0]] # Load the tls package -package require tls 1.6 +package require tls set tlsServerPort 8048 # Specify where the certificates are @@ -302,12 +301,12 @@ } {1 {expected integer but got "badport"}} test tlsIO-2.1 {tcp connection} {socket stdio} { removeFile script set f [open script w] + puts $f [list set auto_path $auto_path] puts $f { - set auto_path [linsert $auto_path 0 [lindex [split $env(PATH) ";:"] 0]] package require tls set timer [after 2000 "set x timed_out"] } puts $f "set f \[tls::socket -server accept -certfile $serverCert -cafile $caCert -keyfile $serverKey 8828 \]" puts $f { @@ -344,12 +343,12 @@ } test tlsIO-2.2 {tcp connection with client port specified} {socket stdio} { removeFile script set f [open script w] + puts $f [list set auto_path $auto_path] puts $f { - set auto_path [linsert $auto_path 0 [lindex [split $env(PATH) ";:"] 0]] package require tls set timer [after 2000 "set x done"] } puts $f "set f \[tls::socket -server accept -certfile $serverCert -cafile $caCert -keyfile $serverKey 8829 \]" puts $f { @@ -384,12 +383,12 @@ } [list ready "hello $port"] test tlsIO-2.3 {tcp connection with client interface specified} {socket stdio} { removeFile script set f [open script w] + puts $f [list set auto_path $auto_path] puts $f { - set auto_path [linsert $auto_path 0 [lindex [split $env(PATH) ";:"] 0]] package require tls set timer [after 2000 "set x done"] } puts $f "set f \[tls::socket -server accept -certfile $serverCert -cafile $caCert -keyfile $serverKey 8830 \]" puts $f { @@ -422,12 +421,12 @@ } {ready {hello 127.0.0.1}} test tlsIO-2.4 {tcp connection with server interface specified} {socket stdio} { removeFile script set f [open script w] + puts $f [list set auto_path $auto_path] puts $f { - set auto_path [linsert $auto_path 0 [lindex [split $env(PATH) ";:"] 0]] package require tls set timer [after 2000 "set x done"] } puts $f "set f \[tls::socket -server accept -certfile $serverCert -cafile $caCert -keyfile $serverKey -myaddr [info hostname] 8831 \]" puts $f { @@ -459,12 +458,12 @@ } {ready hello} test tlsIO-2.5 {tcp connection with redundant server port} {socket stdio} { removeFile script set f [open script w] + puts $f [list set auto_path $auto_path] puts $f { - set auto_path [linsert $auto_path 0 [lindex [split $env(PATH) ";:"] 0]] package require tls set timer [after 2000 "set x done"] } puts $f "set f \[tls::socket -server accept -certfile $serverCert -cafile $caCert -keyfile $serverKey 8832 \]" puts $f { @@ -506,12 +505,12 @@ } ok test tlsIO-2.7 {echo server, one line} {socket stdio} { removeFile script set f [open script w] + puts $f [list set auto_path $auto_path] puts $f { - set auto_path [linsert $auto_path 0 [lindex [split $env(PATH) ";:"] 0]] package require tls set timer [after 2000 "set x done"] } puts $f "set f \[tls::socket -server accept -certfile $serverCert -cafile $caCert -keyfile $serverKey 8834 \]" puts $f { @@ -550,12 +549,12 @@ list $x $y } {{hello abcdefghijklmnop} done} test tlsIO-2.8 {echo server, loop 50 times, single connection} {socket stdio} { set f [open script w] + puts $f [list set auto_path $auto_path] puts $f { - set auto_path [linsert $auto_path 0 [lindex [split $env(PATH) ";:"] 0]] package require tls } puts $f "set f \[tls::socket -server accept -certfile $serverCert -cafile $caCert -keyfile $serverKey 8835 \]" puts $f { proc accept {s a p} { @@ -602,12 +601,12 @@ test tlsIO-2.9 {socket conflict} {socket stdio} { set s [tls::socket -server accept 8828] removeFile script set f [open script w] + puts $f [list set auto_path $auto_path] puts -nonewline $f { - set auto_path [linsert $auto_path 0 [lindex [split $env(PATH) ";:"] 0]] package require tls tls::socket -server accept 8828 } close $f set f [open "|[list $::tcltest::tcltest script]" r] @@ -689,12 +688,12 @@ {socket stdio unixOnly} { # There is a debug assertion on Windows/SSL that causes a crash when the # certificate isn't specified. removeFile script set f [open script w] + puts $f [list set auto_path $auto_path] puts $f { - set auto_path [linsert $auto_path 0 [lindex [split $env(PATH) ";:"] 0]] package require tls set timer [after 2000 "set x timed_out"] set f [tls::socket -server accept 8828] proc accept {file addr port} { global x @@ -722,12 +721,12 @@ } {ready done {}} test tlsIO-3.1 {socket conflict} {socket stdio} { removeFile script set f [open script w] + puts $f [list set auto_path $auto_path] puts $f { - set auto_path [linsert $auto_path 0 [lindex [split $env(PATH) ";:"] 0]] package require tls } puts $f "set f \[tls::socket -server accept -certfile $serverCert -cafile $caCert -keyfile $serverKey 8828 \]" puts $f { puts ready @@ -747,12 +746,12 @@ } {1 {couldn't open socket: address already in use}} test tlsIO-3.2 {server with several clients} {socket stdio} { removeFile script set f [open script w] + puts $f [list set auto_path $auto_path] puts $f { - set auto_path [linsert $auto_path 0 [lindex [split $env(PATH) ";:"] 0]] package require tls set t1 [after 30000 "set x timed_out"] set t2 [after 31000 "set x timed_out"] set t3 [after 32000 "set x timed_out"] set counter 0 @@ -816,12 +815,12 @@ test tlsIO-4.1 {server with several clients} {socket stdio} { # have seen intermittent hangs on Windows removeFile script set f [open script w] + puts $f [list set auto_path $auto_path] puts $f { - set auto_path [linsert $auto_path 0 [lindex [split $env(PATH) ";:"] 0]] package require tls gets stdin } puts $f "set s \[tls::socket -certfile $clientCert -cafile $caCert -keyfile $clientKey 127.0.0.1 8828 \]" puts $f { @@ -924,12 +923,12 @@ test tlsIO-6.1 {accept callback error} {socket stdio} { # There is a debug assertion on Windows/SSL that causes a crash when the # certificate isn't specified. removeFile script set f [open script w] + puts $f [list set auto_path $auto_path] puts $f { - set auto_path [linsert $auto_path 0 [lindex [split $env(PATH) ";:"] 0]] package require tls gets stdin } puts $f [list tls::socket -cafile $caCert 127.0.0.1 8848] close $f @@ -952,12 +951,12 @@ } {{divide by zero}} test tlsIO-7.1 {testing socket specific options} {socket stdio} { removeFile script set f [open script w] + puts $f [list set auto_path $auto_path] puts $f { - set auto_path [linsert $auto_path 0 [lindex [split $env(PATH) ";:"] 0]] package require tls } puts $f [list tls::socket -server accept \ -certfile $serverCert -cafile $caCert -keyfile $serverKey 8820] puts $f { @@ -986,12 +985,12 @@ } {0 0 3} test tlsIO-7.2 {testing socket specific options} {socket stdio} { removeFile script set f [open script w] + puts $f [list set auto_path $auto_path] puts $f { - set auto_path [linsert $auto_path 0 [lindex [split $env(PATH) ";:"] 0]] package require tls } puts $f "tls::socket -server accept -certfile $serverCert -cafile $caCert -keyfile $serverKey 8821" puts $f { proc accept args { @@ -1758,12 +1757,12 @@ # waits a second, and exits. The server socket will now # be closed unless script1 inherited it. set f [open script2 w] puts $f [list set tclsh $::tcltest::tcltest] + puts $f [list set auto_path $auto_path] puts $f { - set auto_path [linsert $auto_path 0 [lindex [split $env(PATH) ";:"] 0]] package require tls } puts $f "set f \[tls::socket -server accept \ -certfile $serverCert -cafile $caCert -keyfile $serverKey 8828\]" puts $f { @@ -1815,12 +1814,12 @@ # launches script1 and exits. If the child process inherited the # client socket, the socket will still be open. set f [open script2 w] puts $f [list set tclsh $::tcltest::tcltest] + puts $f [list set auto_path $auto_path] puts $f { - set auto_path [linsert $auto_path 0 [lindex [split $env(PATH) ";:"] 0]] package require tls } puts $f "set f \[tls::socket -certfile $clientCert -cafile $caCert \ -keyfile $clientKey 127.0.0.1 8829\]" puts $f { @@ -1876,12 +1875,12 @@ } close $f set f [open script2 w] puts $f [list set tclsh $::tcltest::tcltest] + puts $f [list set auto_path $auto_path] puts $f { - set auto_path [linsert $auto_path 0 [lindex [split $env(PATH) ";:"] 0]] package require tls } puts $f "set f \[tls::socket -server accept \ -certfile $serverCert -cafile $caCert -keyfile $serverKey 8930\]" puts $f { @@ -1928,11 +1927,10 @@ # HOBBS: never tested removeFile script threadReap makeFile { - set auto_path [linsert $auto_path 0 [lindex [split $env(PATH) ";:"] 0]] package require tls set f [tls::socket -server accept 8828] proc accept {s a p} { fileevent $s readable [list echo $s] fconfigure $s -buffering line Index: tls.c ================================================================== --- tls.c +++ tls.c @@ -3,12 +3,10 @@ * some modifications: * Copyright (C) 2000 Ajuba Solutions * Copyright (C) 2002 ActiveState Corporation * Copyright (C) 2004 Starfish Systems * - * $Header: /home/rkeene/tmp/cvs2fossil/../tcltls/tls/tls/tls.c,v 1.37 2015/07/07 17:16:02 andreas_kupries Exp $ - * * TLS (aka SSL) Channel - can be layered on any bi-directional * Tcl_Channel (Note: Requires Trf Core Patch) * * This was built (almost) from scratch based upon observation of * OpenSSL 0.9.2B @@ -65,11 +63,11 @@ static SSL_CTX *CTX_Init _ANSI_ARGS_((State *statePtr, int proto, char *key, char *cert, char *CAdir, char *CAfile, char *ciphers, char *DHparams)); -static int TlsLibInit _ANSI_ARGS_ (()) ; +static int TlsLibInit _ANSI_ARGS_ ((void)) ; #define TLS_PROTO_SSL2 0x01 #define TLS_PROTO_SSL3 0x02 #define TLS_PROTO_TLS1 0x04 #define TLS_PROTO_TLS1_1 0x08 @@ -79,54 +77,11 @@ /* * Static data structures */ #ifndef OPENSSL_NO_DH -/* code derived from output of 'openssl dhparam -C 2048' */ - -static unsigned char dh2048_p[]={ - 0xEC,0xFD,0x6F,0x66,0xD8,0xBC,0xB4,0xCB,0xD7,0xE7,0xB4,0xAE, - 0xEC,0xC0,0x06,0x25,0x40,0x9F,0x3F,0xC4,0xAC,0x34,0x19,0x36, - 0x8A,0xAB,0xA9,0xF6,0x45,0x36,0x87,0x1F,0x10,0x35,0x3F,0x90, - 0x00,0xC6,0x7A,0xE8,0x51,0xF4,0x7F,0x50,0x0F,0xC2,0x82,0x91, - 0xAD,0x60,0x1B,0x49,0xB1,0x0B,0x23,0xC3,0x37,0xAE,0x0D,0x2C, - 0x49,0xC6,0xFB,0x60,0x9D,0x50,0x2F,0x8C,0x2F,0xDE,0xE6,0x5F, - 0x53,0x8B,0x5F,0xF9,0x70,0x16,0xEE,0x51,0xD1,0xAB,0x02,0x48, - 0x61,0xF1,0xA0,0xD7,0xBD,0x04,0x24,0xF0,0xE4,0xD1,0x0A,0x4C, - 0x28,0xDC,0x22,0x78,0x7C,0xED,0x2A,0xFA,0xF4,0x57,0x7C,0xAE, - 0xDF,0x52,0xC6,0xA2,0x11,0x28,0xC5,0x3B,0xB8,0x2F,0x95,0x3F, - 0x1E,0x05,0x66,0xFE,0x7D,0x1A,0x73,0xA0,0x45,0xF8,0xBB,0x8C, - 0x64,0xB9,0xA9,0x4D,0x23,0xBE,0x20,0x60,0xA2,0xF7,0xC7,0xD8, - 0xD8,0x49,0x28,0x9A,0x81,0xAC,0xF9,0x7F,0x3C,0xFC,0xBE,0x25, - 0x5B,0x1D,0xB6,0xAB,0x08,0x06,0x11,0x8D,0x94,0x69,0x3C,0x68, - 0x98,0x5A,0x90,0xF8,0xEB,0x19,0xCA,0x9F,0x1C,0x50,0x96,0x53, - 0xEF,0xEC,0x1B,0x93,0x4F,0x53,0xB7,0xD9,0x04,0x8E,0x48,0x99, - 0x6E,0x24,0xFF,0x66,0xF5,0xB0,0xDF,0x00,0xBA,0x22,0xE2,0xB6, - 0xE3,0x3A,0xC2,0x95,0xB1,0x14,0x68,0xFB,0xA5,0x37,0x22,0x78, - 0x56,0x5C,0xA4,0x23,0x31,0x02,0x97,0x7D,0xA9,0x84,0x0B,0x12, - 0x26,0x58,0x2F,0x86,0x10,0xAD,0xB0,0xAB,0xB9,0x7B,0x05,0x9A, - 0xDE,0x11,0xF1,0xE7,0x34,0xC7,0x95,0x42,0x1C,0x4F,0xA9,0xA8, - 0x92,0xDF,0x3F,0x7B, - }; -static unsigned char dh2048_g[]={ - 0x02, -}; - - -static DH *get_dh2048() -{ - DH *dh=NULL; - - if ((dh=DH_new()) == NULL) return(NULL); - - dh->p=BN_bin2bn(dh2048_p,sizeof(dh2048_p),NULL); - dh->g=BN_bin2bn(dh2048_g,sizeof(dh2048_g),NULL); - - if ((dh->p == NULL) || (dh->g == NULL)) - return(NULL); - return(dh); -} +#include "dh_params.h" #endif /* * Defined in Tls_Init to determine what kind of channels we are using * (old-style 8.2.0-8.3.1 or new-style 8.3.2+). @@ -168,11 +123,10 @@ * Based from /crypto/cryptlib.c of OpenSSL and NSOpenSSL. */ static Tcl_Mutex locks[CRYPTO_NUM_LOCKS]; static Tcl_Mutex init_mx; -static int initialized; static void CryptoThreadLockCallback (int mode, int n, const char *file, int line); static unsigned long CryptoThreadIdCallback (void); static void @@ -314,11 +268,11 @@ X509 *cert = X509_STORE_CTX_get_current_cert(ctx); State *statePtr = (State*)SSL_get_app_data(ssl); int depth = X509_STORE_CTX_get_error_depth(ctx); int err = X509_STORE_CTX_get_error(ctx); - dprintf(stderr, "Verify: %d\n", ok); + dprintf("Verify: %d", ok); if (!ok) { errStr = (char*)X509_verify_cert_error_string(err); } else { errStr = (char *)0; @@ -363,11 +317,11 @@ ok = 0; } else { result = Tcl_GetObjResult(statePtr->interp); string = Tcl_GetStringFromObj(result, &length); /* An empty result leaves verification unchanged. */ - if (length > 0) { + if (string != NULL && length > 0) { if (Tcl_GetIntFromObj(statePtr->interp, result, &ok) != TCL_OK) { Tcl_BackgroundError(statePtr->interp); ok = 0; } } @@ -1617,16 +1571,16 @@ statePtr->timer = NULL; } if (statePtr->bio) { /* This will call SSL_shutdown. Bug 1414045 */ - dprintf(stderr, "BIO_free_all(%p)\n", statePtr->bio); + dprintf("BIO_free_all(%p)", statePtr->bio); BIO_free_all(statePtr->bio); statePtr->bio = NULL; } if (statePtr->ssl) { - dprintf(stderr, "SSL_free(%p)\n", statePtr->ssl); + dprintf("SSL_free(%p)", statePtr->ssl); SSL_free(statePtr->ssl); statePtr->ssl = NULL; } if (statePtr->ctx) { SSL_CTX_free(statePtr->ctx); @@ -1660,10 +1614,14 @@ int Tls_Init(Tcl_Interp *interp) /* Interpreter in which the package is * to be made available. */ { + const char tlsTclInitScript[] = { +#include "tls.tcl.h" + }; + int major, minor, patchlevel, release; /* * The original 8.2.0 stacked channel implementation (and the patch * that preceded it) had problems with scalability and robustness. @@ -1719,11 +1677,15 @@ (ClientData) 0, (Tcl_CmdDeleteProc *) NULL); Tcl_CreateObjCommand(interp, "tls::misc", MiscObjCmd, (ClientData) 0, (Tcl_CmdDeleteProc *) NULL); - return Tcl_PkgProvide(interp, PACKAGE_NAME, PACKAGE_VERSION); + if (interp) { + Tcl_Eval(interp, tlsTclInitScript); + } + + return Tcl_PkgProvide(interp, "tls", PACKAGE_VERSION); } /* *------------------------------------------------------* * @@ -1765,23 +1727,25 @@ * Result: * none * *------------------------------------------------------* */ -static int -TlsLibInit () -{ +static int TlsLibInit (void) { + static int initialized = 0; int i; char rnd_seed[16] = "GrzSlplKqUdnnzP!"; /* 16 bytes */ int status=TCL_OK; + + if (initialized) { + return status; + } + initialized = 1; + #if defined(OPENSSL_THREADS) && defined(TCL_THREADS) size_t num_locks; - if (!initialized) { - Tcl_MutexLock(&init_mx); - if (!initialized) { - initialized = 1; + Tcl_MutexLock(&init_mx); #endif if (CRYPTO_set_mem_functions((void *(*)(size_t))Tcl_Alloc, (void *(*)(void *, size_t))Tcl_Realloc, (void(*)(void *))Tcl_Free) == 0) { @@ -1822,14 +1786,12 @@ for (i = 0; i < 16; i++) { rnd_seed[i] = 1 + (char) (255.0 * rand()/(RAND_MAX+1.0)); } RAND_seed(rnd_seed, sizeof(rnd_seed)); } while (RAND_status() != 1); - } - done: +done: #if defined(OPENSSL_THREADS) && defined(TCL_THREADS) Tcl_MutexUnlock(&init_mx); #endif - } return status; } Index: tls.h ================================================================== --- tls.h +++ tls.h @@ -1,10 +1,8 @@ /* * Copyright (C) 1997-2000 Matt Newman * - * $Header: /home/rkeene/tmp/cvs2fossil/../tcltls/tls/tls/tls.h,v 1.2 2000/01/20 01:59:38 aborr Exp $ - * * TLS (aka SSL) Channel - can be layered on any bi-directional * Tcl_Channel (Note: Requires Trf Core Patch) * * This was built from scratch based upon observation of OpenSSL 0.9.2B * Index: tls.tcl ================================================================== --- tls.tcl +++ tls.tcl @@ -1,10 +1,8 @@ # # Copyright (C) 1997-2000 Matt Newman # -# $Header: /home/rkeene/tmp/cvs2fossil/../tcltls/tls/tls/tls.tcl,v 1.14 2015/07/07 17:16:03 andreas_kupries Exp $ -# namespace eval tls { variable logcmd tclLog variable debug 0 # Default flags passed to tls::import Index: tlsBIO.c ================================================================== --- tlsBIO.c +++ tlsBIO.c @@ -1,10 +1,8 @@ /* * Copyright (C) 1997-2000 Matt Newman * - * $Header: /home/rkeene/tmp/cvs2fossil/../tcltls/tls/tls/tlsBIO.c,v 1.8 2004/03/24 05:22:53 razzell Exp $ - * * Provides BIO layer to interface openssl to Tcl. */ #include "tlsInt.h" @@ -59,21 +57,21 @@ int bufLen; { Tcl_Channel chan = Tls_GetParent((State*)(bio->ptr)); int ret; - dprintf(stderr,"\nBioWrite(0x%x, , %d) [0x%x]", - (unsigned int) bio, bufLen, (unsigned int) chan); + dprintf("BioWrite(%p, , %d) [%p]", + (void *) bio, bufLen, (void *) chan); if (channelTypeVersion == TLS_CHANNEL_VERSION_2) { ret = Tcl_WriteRaw(chan, buf, bufLen); } else { ret = Tcl_Write(chan, buf, bufLen); } - dprintf(stderr,"\n[0x%x] BioWrite(%d) -> %d [%d.%d]", - (unsigned int) chan, bufLen, ret, Tcl_Eof(chan), Tcl_GetErrno()); + dprintf("[%p] BioWrite(%d) -> %d [%d.%d]", + (void *) chan, bufLen, ret, Tcl_Eof(chan), Tcl_GetErrno()); BIO_clear_flags(bio, BIO_FLAGS_WRITE|BIO_FLAGS_SHOULD_RETRY); if (ret == 0) { if (!Tcl_Eof(chan)) { @@ -94,23 +92,23 @@ int bufLen; { Tcl_Channel chan = Tls_GetParent((State*)bio->ptr); int ret = 0; - dprintf(stderr,"\nBioRead(0x%x, , %d) [0x%x]", - (unsigned int) bio, bufLen, (unsigned int) chan); + dprintf("BioRead(%p, , %d) [%p]", + (void *) bio, bufLen, (void *) chan); if (buf == NULL) return 0; if (channelTypeVersion == TLS_CHANNEL_VERSION_2) { ret = Tcl_ReadRaw(chan, buf, bufLen); } else { ret = Tcl_Read(chan, buf, bufLen); } - dprintf(stderr,"\n[0x%x] BioRead(%d) -> %d [%d.%d]", - (unsigned int) chan, bufLen, ret, Tcl_Eof(chan), Tcl_GetErrno()); + dprintf("[%p] BioRead(%d) -> %d [%d.%d]", + (void *) chan, bufLen, ret, Tcl_Eof(chan), Tcl_GetErrno()); BIO_clear_flags(bio, BIO_FLAGS_READ|BIO_FLAGS_SHOULD_RETRY); if (ret == 0) { if (!Tcl_Eof(chan)) { @@ -141,13 +139,13 @@ { Tcl_Channel chan = Tls_GetParent((State*)bio->ptr); long ret = 1; int *ip; - dprintf(stderr,"\nBioCtrl(0x%x, 0x%x, 0x%x, 0x%x)", - (unsigned int) bio, (unsigned int) cmd, (unsigned int) num, - (unsigned int) ptr); + dprintf("BioCtrl(%p, 0x%x, 0x%x, %p)", + (void *) bio, (unsigned int) cmd, (unsigned int) num, + (void *) ptr); switch (cmd) { case BIO_CTRL_RESET: num = 0; case BIO_C_FILE_SEEK: @@ -180,24 +178,24 @@ break; case BIO_CTRL_SET_CLOSE: bio->shutdown = (int)num; break; case BIO_CTRL_EOF: - dprintf(stderr, "BIO_CTRL_EOF\n"); + dprintf("BIO_CTRL_EOF"); ret = Tcl_Eof(chan); break; case BIO_CTRL_PENDING: ret = (Tcl_InputBuffered(chan) ? 1 : 0); - dprintf(stderr, "BIO_CTRL_PENDING(%d)\n", (int) ret); + dprintf("BIO_CTRL_PENDING(%d)", (int) ret); break; case BIO_CTRL_WPENDING: ret = 0; break; case BIO_CTRL_DUP: break; case BIO_CTRL_FLUSH: - dprintf(stderr, "BIO_CTRL_FLUSH\n"); + dprintf("BIO_CTRL_FLUSH"); if (channelTypeVersion == TLS_CHANNEL_VERSION_2) { ret = ((Tcl_WriteRaw(chan, "", 0) >= 0) ? 1 : -1); } else { ret = ((Tcl_Flush(chan) == TCL_OK) ? 1 : -1); } Index: tlsIO.c ================================================================== --- tlsIO.c +++ tlsIO.c @@ -1,11 +1,9 @@ /* * Copyright (C) 1997-2000 Matt Newman * Copyright (C) 2000 Ajuba Solutions * - * $Header: /home/rkeene/tmp/cvs2fossil/../tcltls/tls/tls/tlsIO.c,v 1.19 2015/06/06 09:07:08 apnadkarni Exp $ - * * TLS (aka SSL) Channel - can be layered on any bi-directional * Tcl_Channel (Note: Requires Trf Core Patch) * * This was built from scratch based upon observation of OpenSSL 0.9.2B * @@ -284,11 +282,11 @@ TlsCloseProc(ClientData instanceData, /* The socket to close. */ Tcl_Interp *interp) /* For error reporting - unused. */ { State *statePtr = (State *) instanceData; - dprintf(stderr,"\nTlsCloseProc(0x%x)", (unsigned int) statePtr); + dprintf("TlsCloseProc(%p)", (void *) statePtr); if (channelTypeVersion == TLS_CHANNEL_VERSION_1) { /* * Remove event handler to underlying channel, this could * be because we are closing for real, or being "unstacked". @@ -332,11 +330,11 @@ State *statePtr = (State *) instanceData; int bytesRead; /* How many bytes were read? */ *errorCodePtr = 0; - dprintf(stderr,"\nBIO_read(%d)", bufSize); + dprintf("BIO_read(%d)", bufSize); if (statePtr->flags & TLS_TCL_CALLBACK) { /* don't process any bytes while verify callback is running */ bytesRead = 0; goto input; @@ -367,20 +365,20 @@ * functions play with the retry flags though, and this seems to work * correctly. Similar fix in TlsOutputProc. - hobbs */ ERR_clear_error(); bytesRead = BIO_read(statePtr->bio, buf, bufSize); - dprintf(stderr,"\nBIO_read -> %d", bytesRead); + dprintf("BIO_read -> %d", bytesRead); if (bytesRead < 0) { int err = SSL_get_error(statePtr->ssl, bytesRead); if (err == SSL_ERROR_SSL) { Tls_Error(statePtr, SSL_ERROR(statePtr->ssl, bytesRead)); *errorCodePtr = ECONNABORTED; } else if (BIO_should_retry(statePtr->bio)) { - dprintf(stderr,"RE! "); + dprintf("RE! "); *errorCodePtr = EAGAIN; } else { *errorCodePtr = Tcl_GetErrno(); if (*errorCodePtr == ECONNRESET) { /* Soft EOF */ @@ -388,11 +386,11 @@ bytesRead = 0; } } } input: - dprintf(stderr, "\nInput(%d) -> %d [%d]", bufSize, bytesRead, *errorCodePtr); + dprintf("Input(%d) -> %d [%d]", bufSize, bytesRead, *errorCodePtr); return bytesRead; } /* *------------------------------------------------------------------- @@ -421,11 +419,11 @@ State *statePtr = (State *) instanceData; int written, err; *errorCodePtr = 0; - dprintf(stderr,"\nBIO_write(0x%x, %d)", (unsigned int) statePtr, toWrite); + dprintf("BIO_write(%p, %d)", (void *) statePtr, toWrite); if (statePtr->flags & TLS_TCL_CALLBACK) { /* don't process any bytes while verify callback is running */ written = -1; *errorCodePtr = EAGAIN; @@ -440,11 +438,11 @@ } if (statePtr->flags & TLS_TCL_INIT) { statePtr->flags &= ~(TLS_TCL_INIT); } if (toWrite == 0) { - dprintf(stderr, "zero-write\n"); + dprintf("zero-write"); BIO_flush(statePtr->bio); written = 0; goto output; } else { /* @@ -458,51 +456,51 @@ * BIO functions play with the retry flags though, and this seems to * work correctly. Similar fix in TlsInputProc. - hobbs */ ERR_clear_error(); written = BIO_write(statePtr->bio, buf, toWrite); - dprintf(stderr,"\nBIO_write(0x%x, %d) -> [%d]", - (unsigned int) statePtr, toWrite, written); + dprintf("BIO_write(%p, %d) -> [%d]", + (void *) statePtr, toWrite, written); } if (written <= 0) { switch ((err = SSL_get_error(statePtr->ssl, written))) { case SSL_ERROR_NONE: if (written < 0) { written = 0; } break; case SSL_ERROR_WANT_WRITE: - dprintf(stderr," write W BLOCK"); + dprintf(" write W BLOCK"); break; case SSL_ERROR_WANT_READ: - dprintf(stderr," write R BLOCK"); + dprintf(" write R BLOCK"); break; case SSL_ERROR_WANT_X509_LOOKUP: - dprintf(stderr," write X BLOCK"); + dprintf(" write X BLOCK"); break; case SSL_ERROR_ZERO_RETURN: - dprintf(stderr," closed\n"); + dprintf(" closed"); written = 0; break; case SSL_ERROR_SYSCALL: *errorCodePtr = Tcl_GetErrno(); - dprintf(stderr," [%d] syscall errr: %d", + dprintf(" [%d] syscall errr: %d", written, *errorCodePtr); written = -1; break; case SSL_ERROR_SSL: Tls_Error(statePtr, SSL_ERROR(statePtr->ssl, written)); *errorCodePtr = ECONNABORTED; written = -1; break; default: - dprintf(stderr," unknown err: %d\n", err); + dprintf(" unknown err: %d", err); break; } } output: - dprintf(stderr, "\nOutput(%d) -> %d", toWrite, written); + dprintf("Output(%d) -> %d", toWrite, written); return written; } /* *------------------------------------------------------------------- @@ -551,16 +549,16 @@ /* * Request for a specific option has to fail, we don't have any. */ return TCL_ERROR; } else { +#if 0 size_t len = 0; if (optionName != (char *) NULL) { len = strlen(optionName); } -#if 0 if ((len == 0) || ((len > 1) && (optionName[1] == 'c') && (strncmp(optionName, "-cipher", len) == 0))) { if (len == 0) { Tcl_DStringAppendElement(dsPtr, "-cipher"); } @@ -597,11 +595,11 @@ * combination of TCL_READABLE, * TCL_WRITABLE and TCL_EXCEPTION. */ { State *statePtr = (State *) instanceData; - dprintf(stderr, "TlsWatchProc(0x%x)\n", mask); + dprintf("TlsWatchProc(0x%x)", mask); /* Pretend to be dead as long as the verify callback is running. * Otherwise that callback could be invoked recursively. */ if (statePtr->flags & TLS_TCL_CALLBACK) { return; } @@ -776,11 +774,11 @@ ClientData clientData; int mask; { State *statePtr = (State *) clientData; -dprintf(stderr, "HANDLER(0x%x)\n", mask); + dprintf("HANDLER(0x%x)", mask); Tcl_Preserve( (ClientData)statePtr); if (mask & TCL_READABLE) { BIO_set_flags(statePtr->p_bio, BIO_FLAGS_READ); } else { @@ -885,11 +883,11 @@ State *statePtr; int *errorCodePtr; /* Where to store error code. */ { int err; - dprintf(stderr,"\nWaitForConnect(0x%x)", (unsigned int) statePtr); + dprintf("WaitForConnect(%p)", (void *) statePtr); if (statePtr->flags & TLS_TCL_HANDSHAKE_FAILED) { /* * We choose ECONNRESET over ECONNABORTED here because some server * side code, on the wiki for example, sets up a read handler that @@ -924,21 +922,21 @@ statePtr->flags |= TLS_TCL_HANDSHAKE_FAILED; *errorCodePtr = ECONNABORTED; return -1; } else if (BIO_should_retry(statePtr->bio)) { if (statePtr->flags & TLS_TCL_ASYNC) { - dprintf(stderr,"E! "); + dprintf("E! "); *errorCodePtr = EAGAIN; return -1; } else { continue; } } else if (err == 0) { if (Tcl_Eof(statePtr->self)) { return 0; } - dprintf(stderr,"CR! "); + dprintf("CR! "); *errorCodePtr = ECONNRESET; return -1; } if (statePtr->flags & TLS_TCL_SERVER) { err = SSL_get_verify_result(statePtr->ssl); @@ -949,14 +947,14 @@ *errorCodePtr = ECONNABORTED; return -1; } } *errorCodePtr = Tcl_GetErrno(); - dprintf(stderr,"ERR(%d, %d) ", rc, *errorCodePtr); + dprintf("ERR(%d, %d) ", rc, *errorCodePtr); return -1; } - dprintf(stderr,"R0! "); + dprintf("R0! "); return 1; } } Tcl_Channel Index: tlsInt.h ================================================================== --- tlsInt.h +++ tlsInt.h @@ -1,10 +1,8 @@ /* * Copyright (C) 1997-2000 Matt Newman * - * $Header: /home/rkeene/tmp/cvs2fossil/../tcltls/tls/tls/tlsInt.h,v 1.17 2015/06/06 09:07:08 apnadkarni Exp $ - * * TLS (aka SSL) Channel - can be layered on any bi-directional * Tcl_Channel (Note: Requires Trf Core Patch) * * This was built from scratch based upon observation of OpenSSL 0.9.2B * @@ -76,14 +74,14 @@ #endif #ifndef ECONNRESET #define ECONNRESET 131 /* Connection reset by peer */ #endif -#ifdef DEBUG -#define dprintf fprintf +#ifdef TCLEXT_TCLTLS_DEBUG +#define dprintf(...) { fprintf(stderr, "%s:%i:", __func__, __LINE__); fprintf(stderr, __VA_ARGS__); fprintf(stderr, "\n"); } #else -#define dprintf if (0) fprintf +#define dprintf(...) if (0) { fprintf(stderr, __VA_ARGS__); } #endif #define SSL_ERROR(ssl,err) \ ((char*)ERR_reason_error_string((unsigned long)SSL_get_error((ssl),(err)))) /* Index: tlsX509.c ================================================================== --- tlsX509.c +++ tlsX509.c @@ -1,10 +1,8 @@ /* * Copyright (C) 1997-2000 Sensus Consulting Ltd. * Matt Newman - * - * $Header: /home/rkeene/tmp/cvs2fossil/../tcltls/tls/tls/tlsX509.c,v 1.5 2004/06/29 10:58:08 patthoyts Exp $ */ #include "tlsInt.h" /* * Ensure these are not macros - known to be defined on Win32 DELETED win/makefile.vc Index: win/makefile.vc ================================================================== --- win/makefile.vc +++ /dev/null @@ -1,496 +0,0 @@ -# makefile.vc -- -*- Makefile -*- -# -# Microsoft Visual C++ makefile for use with nmake.exe v1.62+ (VC++ 5.0+) -# -# This makefile is based upon the Tcl 8.4 Makefile.vc and modified to -# make it suitable as a general package makefile. Look for the word EDIT -# which marks sections that may need modification. As a minumum you will -# need to change the PROJECT, DOTVERSION and DLLOBJS variables to values -# relevant to your package. -# -# See the file "license.terms" for information on usage and redistribution -# of this file, and for a DISCLAIMER OF ALL WARRANTIES. -# -# Copyright (c) 1995-1996 Sun Microsystems, Inc. -# Copyright (c) 1998-2000 Ajuba Solutions. -# Copyright (c) 2001 ActiveState Corporation. -# Copyright (c) 2001-2002 David Gravereaux. -# Copyright (c) 2003-2006 Pat Thoyts -# -#------------------------------------------------------------------------- -# RCS: @(#)$Id: makefile.vc,v 1.14 2015/06/06 09:07:08 apnadkarni Exp $ -#------------------------------------------------------------------------- - -# Check to see we are configured to build with MSVC (MSDEVDIR or MSVCDIR) -# or with the MS Platform SDK (MSSDK). Visual Studio .NET 2003 and 2005 define -# VCINSTALLDIR instead. The MSVC Toolkit release defines yet another. -!if !defined(MSDEVDIR) && !defined(MSVCDIR) && !defined(MSSDK) && !defined(VCINSTALLDIR) && !defined(VCToolkitInstallDir) -MSG = ^ -You need to run vcvars32.bat from Developer Studio or setenv.bat from the^ -Platform SDK first to setup the environment. Jump to this line to read^ -the build instructions. -!error $(MSG) -!endif - -#------------------------------------------------------------------------------ -# HOW TO USE this makefile: -# -# 1) It is now necessary to have %MSVCDir% set in the environment. This is -# used as a check to see if vcvars32.bat had been run prior to running -# nmake or during the installation of Microsoft Visual C++, MSVCDir had -# been set globally and the PATH adjusted. Either way is valid. -# -# You'll need to run vcvars32.bat contained in the MsDev's vc(98)/bin -# directory to setup the proper environment, if needed, for your current -# setup. This is a needed bootstrap requirement and allows the swapping of -# different environments to be easier. -# -# 2) To use the Platform SDK (not expressly needed), run setenv.bat after -# vcvars32.bat according to the instructions for it. This can also turn on -# the 64-bit compiler, if your SDK has it. -# -# 3) Targets are: -# all -- Builds everything. -# -- Builds the project (eg: nmake sample) -# test -- Builds and runs the test suite. -# install -- Installs the built binaries and libraries to $(INSTALLDIR) -# in an appropriate subdirectory. -# clean/realclean/distclean -- varying levels of cleaning. -# -# 4) Macros usable on the commandline: -# INSTALLDIR= -# Sets where to install Tcl from the built binaries. -# C:\Progra~1\Tcl is assumed when not specified. -# -# OPTS=static,msvcrt,staticpkg,threads,symbols,profile,loimpact,none -# Sets special options for the core. The default is for none. -# Any combination of the above may be used (comma separated). -# 'none' will over-ride everything to nothing. -# -# static = Builds a static library of the core instead of a -# dll. The shell will be static (and large), as well. -# msvcrt = Effects the static option only to switch it from -# using libcmt(d) as the C runtime [by default] to -# msvcrt(d). This is useful for static embedding -# support. -# staticpkg = Effects the static option only to switch -# tclshXX.exe to have the dde and reg extension linked -# inside it. -# nothreads = Turns off multithreading support (not recommended) -# thrdalloc = Use the thread allocator (shared global free pool). -# symbols = Adds symbols for step debugging. -# profile = Adds profiling hooks. Map file is assumed. -# loimpact = Adds a flag for how NT treats the heap to keep memory -# in use, low. This is said to impact alloc performance. -# -# STATS=memdbg,compdbg,none -# Sets optional memory and bytecode compiler debugging code added -# to the core. The default is for none. Any combination of the -# above may be used (comma separated). 'none' will over-ride -# everything to nothing. -# -# memdbg = Enables the debugging memory allocator. -# compdbg = Enables byte compilation logging. -# -# MACHINE=(IX86|IA64|ALPHA|AMD64) -# Set the machine type used for the compiler, linker, and -# resource compiler. This hook is needed to tell the tools -# when alternate platforms are requested. IX86 is the default -# when not specified. If the CPU environment variable has been -# set (ie: recent Platform SDK) then MACHINE is set from CPU. -# -# TMP_DIR= -# OUT_DIR= -# Hooks to allow the intermediate and output directories to be -# changed. $(OUT_DIR) is assumed to be -# $(BINROOT)\(Release|Debug) based on if symbols are requested. -# $(TMP_DIR) will de $(OUT_DIR)\ by default. -# -# TESTPAT= -# Reads the tests requested to be run from this file. -# -# CFG_ENCODING=encoding -# name of encoding for configuration information. Defaults -# to cp1252 -# -# 5) Examples: -# -# Basic syntax of calling nmake looks like this: -# nmake [-nologo] -f makefile.vc [target|macrodef [target|macrodef] [...]] -# -# Standard (no frills) -# c:\tcl_src\win\>c:\progra~1\micros~1\vc98\bin\vcvars32.bat -# Setting environment for using Microsoft Visual C++ tools. -# c:\tcl_src\win\>nmake -f makefile.vc all -# c:\tcl_src\win\>nmake -f makefile.vc install INSTALLDIR=c:\progra~1\tcl -# -# Building for Win64 -# c:\tcl_src\win\>c:\progra~1\micros~1\vc98\bin\vcvars32.bat -# Setting environment for using Microsoft Visual C++ tools. -# c:\tcl_src\win\>c:\progra~1\platfo~1\setenv.bat /pre64 /RETAIL -# Targeting Windows pre64 RETAIL -# c:\tcl_src\win\>nmake -f makefile.vc MACHINE=IA64 -# -#------------------------------------------------------------------------------ -#============================================================================== -############################################################################### -#------------------------------------------------------------------------------ - -!if !exist("makefile.vc") -MSG = ^ -You must run this makefile only from the directory it is in.^ -Please `cd` to its location first. -!error $(MSG) -!endif - -#------------------------------------------------------------------------- -# Project specific information (EDIT) -# -# You should edit this with the name and version of your project. This -# information is used to generate the name of the package library and -# it's install location. -# -# For example, the sample extension is going to build sample04.dll and -# would install it into $(INSTALLDIR)\lib\sample04 -# -# You need to specify the object files that need to be linked into your -# binary here. -# -#------------------------------------------------------------------------- - -PROJECT = tls - -# Uncomment the following line if this is a Tk extension. -#PROJECT_REQUIRES_TK=1 -!include "rules.vc" - -DOTVERSION = 1.6.6 -VERSION = $(DOTVERSION:.=) -STUBPREFIX = $(PROJECT)stub - -DLLOBJS = \ - $(TMP_DIR)\tls.obj \ - $(TMP_DIR)\tlsBIO.obj \ - $(TMP_DIR)\tlsIO.obj \ - $(TMP_DIR)\tlsX509.obj \ -!if !$(STATIC_BUILD) - $(TMP_DIR)\tls.res -!endif - -#------------------------------------------------------------------------- -# Locate the OpenSSL library and headers -#------------------------------------------------------------------------- - -!ifndef OPENSSL -OPENSSL = c:\opt\openssl -!endif - -!ifndef SSL_INCLUDE_DIR -SSL_INCLUDE_DIR = $(OPENSSL)\include -!endif -!ifndef SSL_LIB_DIR -SSL_LIB_DIR = $(OPENSSL)\lib -!endif - -SSL_LIBS =-libpath:"$(SSL_LIB_DIR)" ssleay32.lib libeay32.lib - -SSL_CFLAGS =-DNO_IDEA=1 -DNO_RC5=1 - -!if !exist("$(SSL_LIB_DIR)\ssleay32.lib") -MSG = ^ -Failed to locate "$(SSL_LIB_DIR)\ssleay32.lib" -You must provide the path to your OpenSSL library.... -!error $(MSG) -!endif - -#------------------------------------------------------------------------- -# Target names and paths ( shouldn't need changing ) -#------------------------------------------------------------------------- - -BINROOT = . -ROOT = .. - -PRJIMPLIB = $(OUT_DIR)\$(PROJECT)$(VERSION)$(SUFX).lib -PRJLIBNAME = $(PROJECT)$(VERSION)$(SUFX).$(EXT) -PRJLIB = $(OUT_DIR)\$(PRJLIBNAME) - -PRJSTUBLIBNAME = $(STUBPREFIX)$(VERSION).lib -PRJSTUBLIB = $(OUT_DIR)\$(PRJSTUBLIBNAME) - -### Make sure we use backslash only. -PRJ_INSTALL_DIR = $(_INSTALLDIR)\$(PROJECT)$(DOTVERSION) -LIB_INSTALL_DIR = $(PRJ_INSTALL_DIR) -BIN_INSTALL_DIR = $(PRJ_INSTALL_DIR) -DOC_INSTALL_DIR = $(PRJ_INSTALL_DIR) -SCRIPT_INSTALL_DIR = $(PRJ_INSTALL_DIR) -INCLUDE_INSTALL_DIR = $(_TCLDIR)\include - -### The following paths CANNOT have spaces in them. -GENERICDIR = $(ROOT) -WINDIR = $(ROOT)\win -LIBDIR = $(ROOT) -DOCDIR = $(ROOT) -TOOLSDIR = $(ROOT)\tools -COMPATDIR = $(ROOT)\compat - -#--------------------------------------------------------------------- -# Compile flags -#--------------------------------------------------------------------- - -!if !$(DEBUG) -!if $(OPTIMIZING) -### This cranks the optimization level to maximize speed -cdebug = $(OPTIMIZATIONS) -!else -cdebug = -!endif -!else if "$(MACHINE)" == "IA64" #|| "$(MACHINE)" == "AMD64" -### Warnings are too many, can't support warnings into errors. -cdebug = -Zi -Od $(DEBUGFLAGS) -!else -cdebug = -Zi -WX $(DEBUGFLAGS) -!endif - -### Declarations common to all compiler options -cwarn = $(WARNINGS) -D _CRT_SECURE_NO_DEPRECATE -D _CRT_NONSTDC_NO_DEPRECATE -cflags = -nologo -c $(COMPILERFLAGS) $(cwarn) -Fp$(TMP_DIR)^\ - -!if $(MSVCRT) -!if $(DEBUG) && !$(UNCHECKED) -crt = -MDd -!else -crt = -MD -!endif -!else -!if $(DEBUG) && !$(UNCHECKED) -crt = -MTd -!else -crt = -MT -!endif -!endif - -!if !$(STATIC_BUILD) -cflags = $(cflags) -DUSE_TCL_STUBS -!if defined(TKSTUBLIB) -cflags = $(cflags) -DUSE_TK_STUBS -!endif -!endif - -INCLUDES = $(TCL_INCLUDES) -I"$(WINDIR)" -I"$(GENERICDIR)" \ - -I"$(SSL_INCLUDE_DIR)" -BASE_CFLAGS = $(cflags) $(cdebug) $(crt) $(INCLUDES) -CON_CFLAGS = $(cflags) $(cdebug) $(crt) -DCONSOLE -TCL_CFLAGS = -DPACKAGE_NAME="\"$(PROJECT)\"" \ - -DPACKAGE_VERSION="\"$(DOTVERSION)\"" \ - $(SSL_CFLAGS) \ - $(BASE_CFLAGS) $(OPTDEFINES) - -#--------------------------------------------------------------------- -# Link flags -#--------------------------------------------------------------------- - -!if $(DEBUG) -ldebug = -debug:full -debugtype:cv -!if $(MSVCRT) -ldebug = $(ldebug) -nodefaultlib:msvcrt -!endif -!else -ldebug = -release -opt:ref -opt:icf,3 -!endif - -### Declarations common to all linker options -lflags = -nologo -machine:$(MACHINE) $(LINKERFLAGS) $(ldebug) - -!if $(PROFILE) -lflags = $(lflags) -profile -!endif - -!if $(ALIGN98_HACK) && !$(STATIC_BUILD) -### Align sections for PE size savings. -lflags = $(lflags) -opt:nowin98 -!else if !$(ALIGN98_HACK) && $(STATIC_BUILD) -### Align sections for speed in loading by choosing the virtual page size. -lflags = $(lflags) -align:4096 -!endif - -!if $(LOIMPACT) -lflags = $(lflags) -ws:aggressive -!endif - -dlllflags = $(lflags) -dll -conlflags = $(lflags) -subsystem:console -guilflags = $(lflags) -subsystem:windows -!if !$(STATIC_BUILD) -baselibs = $(TCLSTUBLIB) -!if defined(TKSTUBLIB) -baselibs = $(baselibs) $(TKSTUBLIB) -!endif -!endif - -# Avoid 'unresolved external symbol __security_cookie' errors. -# c.f. http://support.microsoft.com/?id=894573 -!if "$(MACHINE)" == "IA64" || "$(MACHINE)" == "AMD64" -!if $(VCVERSION) >= 1400 && $(VCVERSION) < 1500 -baselibs = $(baselibs) bufferoverflowU.lib -!endif -!endif - -baselibs = $(baselibs) $(SSL_LIBS) ws2_32.lib user32.lib gdi32.lib advapi32.lib - -#--------------------------------------------------------------------- -# TclTest flags -#--------------------------------------------------------------------- - -!IF "$(TESTPAT)" != "" -TESTFLAGS = $(TESTFLAGS) -file $(TESTPAT) -!ENDIF - -#--------------------------------------------------------------------- -# Project specific targets (EDIT) -#--------------------------------------------------------------------- - -all: setup $(PROJECT) -$(PROJECT): setup $(OUT_DIR)\pkgIndex.tcl $(OUT_DIR)\tls.tcl $(PRJLIB) -install: install-binaries install-libraries install-docs - -test: setup $(PROJECT) - @set TCL_LIBRARY=$(TCL_LIBRARY:\=/) - @set TCLLIBPATH=$(OUT_DIR_PATH:\=/) -!if $(TCLINSTALL) - @set PATH=$(_TCLDIR)\bin;$(PATH) -!else - @set PATH=$(_TCLDIR)\win\$(BUILDDIRTOP);$(PATH) -!endif -!if "$(OS)" == "Windows_NT" || "$(MSVCDIR)" == "IDE" - $(DEBUGGER) $(TCLSH) "$(ROOT)/tests/all.tcl" $(TESTFLAGS) -!else - @echo Please wait while the tests are collected... - $(DEBUGGER) $(TCLSH) "$(ROOT)/tests/all.tcl" $(TESTFLAGS) > tests.log - type tests.log | more -!endif - -shell: setup $(PROJECT) - @set TCL_LIBRARY=$(TCL_LIBRARY:\=/) - @set TCLLIBPATH=$(OUT_DIR_PATH:\=/) -!if $(TCLINSTALL) - @set PATH=$(_TCLDIR)\bin;$(PATH) -!else - @set PATH=$(_TCLDIR)\win\$(BUILDDIRTOP);$(PATH) -!endif - $(DEBUGGER) $(TCLSH) $(SCRIPT) - -setup: - @if not exist $(OUT_DIR)\nul mkdir $(OUT_DIR) - @if not exist $(TMP_DIR)\nul mkdir $(TMP_DIR) - -# See /win/coffbase.txt for extension base addresses. -$(PRJLIB): $(DLLOBJS) -!if $(STATIC_BUILD) - $(lib32) -nologo -out:$@ @<< -$** -<< -!else - $(link32) $(dlllflags) -base:0x10780000 -out:$@ $(baselibs) @<< -$** -<< - $(_VC_MANIFEST_EMBED_DLL) - -@del $*.exp -!endif - -$(PRJSTUBLIB): $(PRJSTUBOBJS) - $(lib32) -nologo -out:$@ $(PRJSTUBOBJS) - -#--------------------------------------------------------------------- -# Implicit rules -#--------------------------------------------------------------------- - -{$(WINDIR)}.c{$(TMP_DIR)}.obj:: - $(cc32) $(TCL_CFLAGS) -DBUILD_$(PROJECT) -Fo$(TMP_DIR)\ @<< -$< -<< - -{$(GENERICDIR)}.c{$(TMP_DIR)}.obj:: - $(cc32) $(TCL_CFLAGS) -DBUILD_$(PROJECT) -Fo$(TMP_DIR)\ @<< -$< -<< - -{$(COMPATDIR)}.c{$(TMP_DIR)}.obj:: - $(cc32) $(TCL_CFLAGS) -DBUILD_$(PROJECT) -Fo$(TMP_DIR)\ @<< -$< -<< - -{$(WINDIR)}.rc{$(TMP_DIR)}.res: - $(rc32) -fo $@ -r -i "$(GENERICDIR)" -D__WIN32__ \ - -DCOMMAVERSION=$(DOTVERSION:.=,),0 \ - -DDOTVERSION=\"$(DOTVERSION)\" \ - -DVERSION=\"$(VERSION)$(SUFX)\" \ -!if $(DEBUG) - -d DEBUG \ -!endif -!if $(TCL_THREADS) - -d TCL_THREADS \ -!endif -!if $(STATIC_BUILD) - -d STATIC_BUILD \ -!endif - $< - -.SUFFIXES: -.SUFFIXES:.c .rc - -#------------------------------------------------------------------------- -# Explicit dependency rules -# -#------------------------------------------------------------------------- - -.PHONY: $(OUT_DIR)\pkgIndex.tcl $(OUT_DIR)\tls.tcl - -$(OUT_DIR)\tls.tcl: $(GENERICDIR)\tls.tcl - @$(COPY) $** $@ - -$(OUT_DIR)\pkgIndex.tcl: - @type << > $@ -if {![package vsatisfies [package provide Tcl] 8.3]} {return} -package ifneeded $(PROJECT) $(DOTVERSION) "source \[file join [list $$dir] tls.tcl\] ; tls::initlib [list $$dir] $(PRJLIBNAME)" -<< - -#--------------------------------------------------------------------- -# Installation. (EDIT) -# -# You may need to modify this section to reflect the final distribution -# of your files and possibly to generate documentation. -# -#--------------------------------------------------------------------- - -install-binaries: - @echo Installing binaries to '$(SCRIPT_INSTALL_DIR)' - @if not exist "$(SCRIPT_INSTALL_DIR)" mkdir "$(SCRIPT_INSTALL_DIR)" - @$(CPY) $(PRJLIB) "$(SCRIPT_INSTALL_DIR)" >NUL - -install-libraries: - @echo Installing libraries to '$(SCRIPT_INSTALL_DIR)' - @if exist $(LIBDIR) $(CPY) $(LIBDIR)\tls.tcl "$(SCRIPT_INSTALL_DIR)" > NUL - @echo Installing package index in '$(SCRIPT_INSTALL_DIR)' - @$(CPY) $(OUT_DIR)\pkgIndex.tcl "$(SCRIPT_INSTALL_DIR)" - -install-docs: - @echo Installing documentation files to '$(DOC_INSTALL_DIR)' - @if exist $(DOCDIR) $(CPY) $(DOCDIR)\tls.htm "$(DOC_INSTALL_DIR)" >NUL - -#--------------------------------------------------------------------- -# Clean up -#--------------------------------------------------------------------- - -clean: - @if exist $(TMP_DIR)\nul $(RMDIR) $(TMP_DIR) - @if exist $(WINDIR)\version.vc del $(WINDIR)\version.vc - @if exist $(WINDIR)\vercl.i del $(WINDIR)\vercl.i - @if exist $(WINDIR)\vercl.x del $(WINDIR)\vercl.x - @if exist $(WINDIR)\_junk.pch del $(WINDIR)\_junk.pch - -realclean: clean - @if exist $(OUT_DIR)\nul $(RMDIR) $(OUT_DIR) - -distclean: realclean - @if exist $(WINDIR)\nmakehlp.exe del $(WINDIR)\nmakehlp.exe - @if exist $(WINDIR)\nmakehlp.obj del $(WINDIR)\nmakehlp.obj DELETED win/nmakehlp.c Index: win/nmakehlp.c ================================================================== --- win/nmakehlp.c +++ /dev/null @@ -1,767 +0,0 @@ -/* - * ---------------------------------------------------------------------------- - * nmakehlp.c -- - * - * This is used to fix limitations within nmake and the environment. - * - * Copyright (c) 2002 by David Gravereaux. - * Copyright (c) 2006 by Pat Thoyts - * - * See the file "license.terms" for information on usage and redistribution of - * this file, and for a DISCLAIMER OF ALL WARRANTIES. - * - * ---------------------------------------------------------------------------- - * RCS: @(#) $Id: nmakehlp.c,v 1.4 2008/06/18 11:29:37 patthoyts Exp $ - * ---------------------------------------------------------------------------- - */ - -#define _CRT_SECURE_NO_DEPRECATE -#include -#define NO_SHLWAPI_GDI -#define NO_SHLWAPI_STREAM -#define NO_SHLWAPI_REG -#include -#pragma comment (lib, "user32.lib") -#pragma comment (lib, "kernel32.lib") -#pragma comment (lib, "shlwapi.lib") -#include -#include - -/* - * This library is required for x64 builds with _some_ versions of MSVC - */ -#if defined(_M_IA64) || defined(_M_AMD64) -#if _MSC_VER >= 1400 && _MSC_VER < 1500 -#pragma comment(lib, "bufferoverflowU") -#endif -#endif - -/* ISO hack for dumb VC++ */ -#ifdef _MSC_VER -#define snprintf _snprintf -#endif - - - -/* protos */ - -int CheckForCompilerFeature(const char *option); -int CheckForLinkerFeature(const char *option); -int IsIn(const char *string, const char *substring); -int GrepForDefine(const char *file, const char *string); -int SubstituteFile(const char *substs, const char *filename); -int QualifyPath(const char *path); -const char * GetVersionFromFile(const char *filename, const char *match); -DWORD WINAPI ReadFromPipe(LPVOID args); - -/* globals */ - -#define CHUNK 25 -#define STATICBUFFERSIZE 1000 -typedef struct { - HANDLE pipe; - char buffer[STATICBUFFERSIZE]; -} pipeinfo; - -pipeinfo Out = {INVALID_HANDLE_VALUE, '\0'}; -pipeinfo Err = {INVALID_HANDLE_VALUE, '\0'}; - -/* - * exitcodes: 0 == no, 1 == yes, 2 == error - */ - -int -main( - int argc, - char *argv[]) -{ - char msg[300]; - DWORD dwWritten; - int chars; - - /* - * Make sure children (cl.exe and link.exe) are kept quiet. - */ - - SetErrorMode(SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX); - - /* - * Make sure the compiler and linker aren't effected by the outside world. - */ - - SetEnvironmentVariable("CL", ""); - SetEnvironmentVariable("LINK", ""); - - if (argc > 1 && *argv[1] == '-') { - switch (*(argv[1]+1)) { - case 'c': - if (argc != 3) { - chars = snprintf(msg, sizeof(msg) - 1, - "usage: %s -c \n" - "Tests for whether cl.exe supports an option\n" - "exitcodes: 0 == no, 1 == yes, 2 == error\n", argv[0]); - WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, chars, - &dwWritten, NULL); - return 2; - } - return CheckForCompilerFeature(argv[2]); - case 'l': - if (argc != 3) { - chars = snprintf(msg, sizeof(msg) - 1, - "usage: %s -l \n" - "Tests for whether link.exe supports an option\n" - "exitcodes: 0 == no, 1 == yes, 2 == error\n", argv[0]); - WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, chars, - &dwWritten, NULL); - return 2; - } - return CheckForLinkerFeature(argv[2]); - case 'f': - if (argc == 2) { - chars = snprintf(msg, sizeof(msg) - 1, - "usage: %s -f \n" - "Find a substring within another\n" - "exitcodes: 0 == no, 1 == yes, 2 == error\n", argv[0]); - WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, chars, - &dwWritten, NULL); - return 2; - } else if (argc == 3) { - /* - * If the string is blank, there is no match. - */ - - return 0; - } else { - return IsIn(argv[2], argv[3]); - } - case 'g': - if (argc == 2) { - chars = snprintf(msg, sizeof(msg) - 1, - "usage: %s -g \n" - "grep for a #define\n" - "exitcodes: integer of the found string (no decimals)\n", - argv[0]); - WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, chars, - &dwWritten, NULL); - return 2; - } - return GrepForDefine(argv[2], argv[3]); - case 's': - if (argc == 2) { - chars = snprintf(msg, sizeof(msg) - 1, - "usage: %s -s \n" - "Perform a set of string map type substutitions on a file\n" - "exitcodes: 0\n", - argv[0]); - WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, chars, - &dwWritten, NULL); - return 2; - } - return SubstituteFile(argv[2], argv[3]); - case 'V': - if (argc != 4) { - chars = snprintf(msg, sizeof(msg) - 1, - "usage: %s -V filename matchstring\n" - "Extract a version from a file:\n" - "eg: pkgIndex.tcl \"package ifneeded http\"", - argv[0]); - WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, chars, - &dwWritten, NULL); - return 0; - } - printf("%s\n", GetVersionFromFile(argv[2], argv[3])); - return 0; - case 'Q': - if (argc != 3) { - chars = snprintf(msg, sizeof(msg) - 1, - "usage: %s -q path\n" - "Emit the fully qualified path\n" - "exitcodes: 0 == no, 1 == yes, 2 == error\n", argv[0]); - WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, chars, - &dwWritten, NULL); - return 2; - } - return QualifyPath(argv[2]); - } - } - chars = snprintf(msg, sizeof(msg) - 1, - "usage: %s -c|-l|-f|-g|-V|-s|-Q ...\n" - "This is a little helper app to equalize shell differences between WinNT and\n" - "Win9x and get nmake.exe to accomplish its job.\n", - argv[0]); - WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, chars, &dwWritten, NULL); - return 2; -} - -int -CheckForCompilerFeature( - const char *option) -{ - STARTUPINFO si; - PROCESS_INFORMATION pi; - SECURITY_ATTRIBUTES sa; - DWORD threadID; - char msg[300]; - BOOL ok; - HANDLE hProcess, h, pipeThreads[2]; - char cmdline[100]; - - hProcess = GetCurrentProcess(); - - ZeroMemory(&pi, sizeof(PROCESS_INFORMATION)); - ZeroMemory(&si, sizeof(STARTUPINFO)); - si.cb = sizeof(STARTUPINFO); - si.dwFlags = STARTF_USESTDHANDLES; - si.hStdInput = INVALID_HANDLE_VALUE; - - ZeroMemory(&sa, sizeof(SECURITY_ATTRIBUTES)); - sa.nLength = sizeof(SECURITY_ATTRIBUTES); - sa.lpSecurityDescriptor = NULL; - sa.bInheritHandle = FALSE; - - /* - * Create a non-inheritible pipe. - */ - - CreatePipe(&Out.pipe, &h, &sa, 0); - - /* - * Dupe the write side, make it inheritible, and close the original. - */ - - DuplicateHandle(hProcess, h, hProcess, &si.hStdOutput, 0, TRUE, - DUPLICATE_SAME_ACCESS | DUPLICATE_CLOSE_SOURCE); - - /* - * Same as above, but for the error side. - */ - - CreatePipe(&Err.pipe, &h, &sa, 0); - DuplicateHandle(hProcess, h, hProcess, &si.hStdError, 0, TRUE, - DUPLICATE_SAME_ACCESS | DUPLICATE_CLOSE_SOURCE); - - /* - * Base command line. - */ - - lstrcpy(cmdline, "cl.exe -nologo -c -TC -Zs -X -Fp.\\_junk.pch "); - - /* - * Append our option for testing - */ - - lstrcat(cmdline, option); - - /* - * Filename to compile, which exists, but is nothing and empty. - */ - - lstrcat(cmdline, " .\\nul"); - - ok = CreateProcess( - NULL, /* Module name. */ - cmdline, /* Command line. */ - NULL, /* Process handle not inheritable. */ - NULL, /* Thread handle not inheritable. */ - TRUE, /* yes, inherit handles. */ - DETACHED_PROCESS, /* No console for you. */ - NULL, /* Use parent's environment block. */ - NULL, /* Use parent's starting directory. */ - &si, /* Pointer to STARTUPINFO structure. */ - &pi); /* Pointer to PROCESS_INFORMATION structure. */ - - if (!ok) { - DWORD err = GetLastError(); - int chars = snprintf(msg, sizeof(msg) - 1, - "Tried to launch: \"%s\", but got error [%u]: ", cmdline, err); - - FormatMessage(FORMAT_MESSAGE_FROM_SYSTEM|FORMAT_MESSAGE_IGNORE_INSERTS| - FORMAT_MESSAGE_MAX_WIDTH_MASK, 0L, err, 0, (LPVOID)&msg[chars], - (300-chars), 0); - WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg,lstrlen(msg), &err,NULL); - return 2; - } - - /* - * Close our references to the write handles that have now been inherited. - */ - - CloseHandle(si.hStdOutput); - CloseHandle(si.hStdError); - - WaitForInputIdle(pi.hProcess, 5000); - CloseHandle(pi.hThread); - - /* - * Start the pipe reader threads. - */ - - pipeThreads[0] = CreateThread(NULL, 0, ReadFromPipe, &Out, 0, &threadID); - pipeThreads[1] = CreateThread(NULL, 0, ReadFromPipe, &Err, 0, &threadID); - - /* - * Block waiting for the process to end. - */ - - WaitForSingleObject(pi.hProcess, INFINITE); - CloseHandle(pi.hProcess); - - /* - * Wait for our pipe to get done reading, should it be a little slow. - */ - - WaitForMultipleObjects(2, pipeThreads, TRUE, 500); - CloseHandle(pipeThreads[0]); - CloseHandle(pipeThreads[1]); - - /* - * Look for the commandline warning code in both streams. - * - in MSVC 6 & 7 we get D4002, in MSVC 8 we get D9002. - */ - - return !(strstr(Out.buffer, "D4002") != NULL - || strstr(Err.buffer, "D4002") != NULL - || strstr(Out.buffer, "D9002") != NULL - || strstr(Err.buffer, "D9002") != NULL - || strstr(Out.buffer, "D2021") != NULL - || strstr(Err.buffer, "D2021") != NULL); -} - -int -CheckForLinkerFeature( - const char *option) -{ - STARTUPINFO si; - PROCESS_INFORMATION pi; - SECURITY_ATTRIBUTES sa; - DWORD threadID; - char msg[300]; - BOOL ok; - HANDLE hProcess, h, pipeThreads[2]; - char cmdline[100]; - - hProcess = GetCurrentProcess(); - - ZeroMemory(&pi, sizeof(PROCESS_INFORMATION)); - ZeroMemory(&si, sizeof(STARTUPINFO)); - si.cb = sizeof(STARTUPINFO); - si.dwFlags = STARTF_USESTDHANDLES; - si.hStdInput = INVALID_HANDLE_VALUE; - - ZeroMemory(&sa, sizeof(SECURITY_ATTRIBUTES)); - sa.nLength = sizeof(SECURITY_ATTRIBUTES); - sa.lpSecurityDescriptor = NULL; - sa.bInheritHandle = TRUE; - - /* - * Create a non-inheritible pipe. - */ - - CreatePipe(&Out.pipe, &h, &sa, 0); - - /* - * Dupe the write side, make it inheritible, and close the original. - */ - - DuplicateHandle(hProcess, h, hProcess, &si.hStdOutput, 0, TRUE, - DUPLICATE_SAME_ACCESS | DUPLICATE_CLOSE_SOURCE); - - /* - * Same as above, but for the error side. - */ - - CreatePipe(&Err.pipe, &h, &sa, 0); - DuplicateHandle(hProcess, h, hProcess, &si.hStdError, 0, TRUE, - DUPLICATE_SAME_ACCESS | DUPLICATE_CLOSE_SOURCE); - - /* - * Base command line. - */ - - lstrcpy(cmdline, "link.exe -nologo "); - - /* - * Append our option for testing. - */ - - lstrcat(cmdline, option); - - ok = CreateProcess( - NULL, /* Module name. */ - cmdline, /* Command line. */ - NULL, /* Process handle not inheritable. */ - NULL, /* Thread handle not inheritable. */ - TRUE, /* yes, inherit handles. */ - DETACHED_PROCESS, /* No console for you. */ - NULL, /* Use parent's environment block. */ - NULL, /* Use parent's starting directory. */ - &si, /* Pointer to STARTUPINFO structure. */ - &pi); /* Pointer to PROCESS_INFORMATION structure. */ - - if (!ok) { - DWORD err = GetLastError(); - int chars = snprintf(msg, sizeof(msg) - 1, - "Tried to launch: \"%s\", but got error [%u]: ", cmdline, err); - - FormatMessage(FORMAT_MESSAGE_FROM_SYSTEM|FORMAT_MESSAGE_IGNORE_INSERTS| - FORMAT_MESSAGE_MAX_WIDTH_MASK, 0L, err, 0, (LPVOID)&msg[chars], - (300-chars), 0); - WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg,lstrlen(msg), &err,NULL); - return 2; - } - - /* - * Close our references to the write handles that have now been inherited. - */ - - CloseHandle(si.hStdOutput); - CloseHandle(si.hStdError); - - WaitForInputIdle(pi.hProcess, 5000); - CloseHandle(pi.hThread); - - /* - * Start the pipe reader threads. - */ - - pipeThreads[0] = CreateThread(NULL, 0, ReadFromPipe, &Out, 0, &threadID); - pipeThreads[1] = CreateThread(NULL, 0, ReadFromPipe, &Err, 0, &threadID); - - /* - * Block waiting for the process to end. - */ - - WaitForSingleObject(pi.hProcess, INFINITE); - CloseHandle(pi.hProcess); - - /* - * Wait for our pipe to get done reading, should it be a little slow. - */ - - WaitForMultipleObjects(2, pipeThreads, TRUE, 500); - CloseHandle(pipeThreads[0]); - CloseHandle(pipeThreads[1]); - - /* - * Look for the commandline warning code in the stderr stream. - */ - - return !(strstr(Out.buffer, "LNK1117") != NULL || - strstr(Err.buffer, "LNK1117") != NULL || - strstr(Out.buffer, "LNK4044") != NULL || - strstr(Err.buffer, "LNK4044") != NULL); -} - -DWORD WINAPI -ReadFromPipe( - LPVOID args) -{ - pipeinfo *pi = (pipeinfo *) args; - char *lastBuf = pi->buffer; - DWORD dwRead; - BOOL ok; - - again: - if (lastBuf - pi->buffer + CHUNK > STATICBUFFERSIZE) { - CloseHandle(pi->pipe); - return (DWORD)-1; - } - ok = ReadFile(pi->pipe, lastBuf, CHUNK, &dwRead, 0L); - if (!ok || dwRead == 0) { - CloseHandle(pi->pipe); - return 0; - } - lastBuf += dwRead; - goto again; - - return 0; /* makes the compiler happy */ -} - -int -IsIn( - const char *string, - const char *substring) -{ - return (strstr(string, substring) != NULL); -} - -/* - * Find a specified #define by name. - * - * If the line is '#define TCL_VERSION "8.5"', it returns 85 as the result. - */ - -int -GrepForDefine( - const char *file, - const char *string) -{ - char s1[51], s2[51], s3[51]; - FILE *f = fopen(file, "rt"); - - if (f == NULL) { - return 0; - } - - do { - int r = fscanf(f, "%50s", s1); - - if (r == 1 && !strcmp(s1, "#define")) { - /* - * Get next two words. - */ - - r = fscanf(f, "%50s %50s", s2, s3); - if (r != 2) { - continue; - } - - /* - * Is the first word what we're looking for? - */ - - if (!strcmp(s2, string)) { - double d1; - - fclose(f); - - /* - * Add 1 past first double quote char. "8.5" - */ - - d1 = atof(s3 + 1); /* 8.5 */ - while (floor(d1) != d1) { - d1 *= 10.0; - } - return ((int) d1); /* 85 */ - } - } - } while (!feof(f)); - - fclose(f); - return 0; -} - -/* - * GetVersionFromFile -- - * Looks for a match string in a file and then returns the version - * following the match where a version is anything acceptable to - * package provide or package ifneeded. - */ - -const char * -GetVersionFromFile( - const char *filename, - const char *match) -{ - size_t cbBuffer = 100; - static char szBuffer[100]; - char *szResult = NULL; - FILE *fp = fopen(filename, "rt"); - - if (fp != NULL) { - /* - * Read data until we see our match string. - */ - - while (fgets(szBuffer, cbBuffer, fp) != NULL) { - LPSTR p, q; - - p = strstr(szBuffer, match); - if (p != NULL) { - /* - * Skip to first digit. - */ - - while (*p && !isdigit(*p)) { - ++p; - } - - /* - * Find ending whitespace. - */ - - q = p; - while (*q && (isalnum(*q) || *q == '.')) { - ++q; - } - - memcpy(szBuffer, p, q - p); - szBuffer[q-p] = 0; - szResult = szBuffer; - break; - } - } - fclose(fp); - } - return szResult; -} - -/* - * List helpers for the SubstituteFile function - */ - -typedef struct list_item_t { - struct list_item_t *nextPtr; - char * key; - char * value; -} list_item_t; - -/* insert a list item into the list (list may be null) */ -static list_item_t * -list_insert(list_item_t **listPtrPtr, const char *key, const char *value) -{ - list_item_t *itemPtr = malloc(sizeof(list_item_t)); - if (itemPtr) { - itemPtr->key = strdup(key); - itemPtr->value = strdup(value); - itemPtr->nextPtr = NULL; - - while(*listPtrPtr) { - listPtrPtr = &(*listPtrPtr)->nextPtr; - } - *listPtrPtr = itemPtr; - } - return itemPtr; -} - -static void -list_free(list_item_t **listPtrPtr) -{ - list_item_t *tmpPtr, *listPtr = *listPtrPtr; - while (listPtr) { - tmpPtr = listPtr; - listPtr = listPtr->nextPtr; - free(tmpPtr->key); - free(tmpPtr->value); - free(tmpPtr); - } -} - -/* - * SubstituteFile -- - * As windows doesn't provide anything useful like sed and it's unreliable - * to use the tclsh you are building against (consider x-platform builds - - * eg compiling AMD64 target from IX86) we provide a simple substitution - * option here to handle autoconf style substitutions. - * The substitution file is whitespace and line delimited. The file should - * consist of lines matching the regular expression: - * \s*\S+\s+\S*$ - * - * Usage is something like: - * nmakehlp -S << $** > $@ - * @PACKAGE_NAME@ $(PACKAGE_NAME) - * @PACKAGE_VERSION@ $(PACKAGE_VERSION) - * << - */ - -int -SubstituteFile( - const char *substitutions, - const char *filename) -{ - size_t cbBuffer = 1024; - static char szBuffer[1024], szCopy[1024]; - char *szResult = NULL; - list_item_t *substPtr = NULL; - FILE *fp, *sp; - - fp = fopen(filename, "rt"); - if (fp != NULL) { - - /* - * Build a list of substutitions from the first filename - */ - - sp = fopen(substitutions, "rt"); - if (sp != NULL) { - while (fgets(szBuffer, cbBuffer, sp) != NULL) { - char *ks, *ke, *vs, *ve; - ks = szBuffer; - while (ks && *ks && isspace(*ks)) ++ks; - ke = ks; - while (ke && *ke && !isspace(*ke)) ++ke; - vs = ke; - while (vs && *vs && isspace(*vs)) ++vs; - ve = vs; - while (ve && *ve && !(*ve == '\r' || *ve == '\n')) ++ve; - *ke = 0, *ve = 0; - list_insert(&substPtr, ks, vs); - } - fclose(sp); - } - - /* debug: dump the list */ -#ifdef _DEBUG - { - int n = 0; - list_item_t *p = NULL; - for (p = substPtr; p != NULL; p = p->nextPtr, ++n) { - fprintf(stderr, "% 3d '%s' => '%s'\n", n, p->key, p->value); - } - } -#endif - - /* - * Run the substitutions over each line of the input - */ - - while (fgets(szBuffer, cbBuffer, fp) != NULL) { - list_item_t *p = NULL; - for (p = substPtr; p != NULL; p = p->nextPtr) { - char *m = strstr(szBuffer, p->key); - if (m) { - char *cp, *op, *sp; - cp = szCopy; - op = szBuffer; - while (op != m) *cp++ = *op++; - sp = p->value; - while (sp && *sp) *cp++ = *sp++; - op += strlen(p->key); - while (*op) *cp++ = *op++; - *cp = 0; - memcpy(szBuffer, szCopy, sizeof(szCopy)); - } - } - printf(szBuffer); - } - - list_free(&substPtr); - } - fclose(fp); - return 0; -} - -/* - * QualifyPath -- - * - * This composes the current working directory with a provided path - * and returns the fully qualified and normalized path. - * Mostly needed to setup paths for testing. - */ - -int -QualifyPath( - const char *szPath) -{ - char szCwd[MAX_PATH + 1]; - char szTmp[MAX_PATH + 1]; - char *p; - GetCurrentDirectory(MAX_PATH, szCwd); - while ((p = strchr(szPath, '/')) && *p) - *p = '\\'; - PathCombine(szTmp, szCwd, szPath); - PathCanonicalize(szCwd, szTmp); - printf("%s\n", szCwd); - return 0; -} - -/* - * Local variables: - * mode: c - * c-basic-offset: 4 - * fill-column: 78 - * indent-tabs-mode: t - * tab-width: 8 - * End: - */ DELETED win/rules.vc Index: win/rules.vc ================================================================== --- win/rules.vc +++ /dev/null @@ -1,622 +0,0 @@ -#------------------------------------------------------------------------------ -# rules.vc -- -# -# Microsoft Visual C++ makefile include for decoding the commandline -# macros. This file does not need editing to build Tcl. -# -# This version is modified from the Tcl source version to support -# building extensions using nmake. -# -# See the file "license.terms" for information on usage and redistribution -# of this file, and for a DISCLAIMER OF ALL WARRANTIES. -# -# Copyright (c) 2001-2002 David Gravereaux. -# Copyright (c) 2003-2008 Patrick Thoyts -# -#------------------------------------------------------------------------------ -# RCS: @(#) $Id: rules.vc,v 1.4 2008/06/18 11:29:37 patthoyts Exp $ -#------------------------------------------------------------------------------ - -!ifndef _RULES_VC -_RULES_VC = 1 - -cc32 = $(CC) # built-in default. -link32 = link -lib32 = lib -rc32 = $(RC) # built-in default. - -!ifndef INSTALLDIR -### Assume the normal default. -_INSTALLDIR = C:\Program Files\Tcl -!else -### Fix the path separators. -_INSTALLDIR = $(INSTALLDIR:/=\) -!endif - -!ifndef MACHINE -!if "$(CPU)" == "" || "$(CPU)" == "i386" -MACHINE = IX86 -!else -MACHINE = $(CPU) -!endif -!endif - -!ifndef CFG_ENCODING -CFG_ENCODING = \"cp1252\" -!endif - -#---------------------------------------------------------- -# Set the proper copy method to avoid overwrite questions -# to the user when copying files and selecting the right -# "delete all" method. -#---------------------------------------------------------- - -!if "$(OS)" == "Windows_NT" -RMDIR = rmdir /S /Q -ERRNULL = 2>NUL -!if ![ver | find "4.0" > nul] -CPY = echo y | xcopy /i >NUL -COPY = copy >NUL -!else -CPY = xcopy /i /y >NUL -COPY = copy /y >NUL -!endif -!else # "$(OS)" != "Windows_NT" -CPY = xcopy /i >_JUNK.OUT # On Win98 NUL does not work here. -COPY = copy >_JUNK.OUT # On Win98 NUL does not work here. -RMDIR = deltree /Y -NULL = \NUL # Used in testing directory existence -ERRNULL = >NUL # Win9x shell cannot redirect stderr -!endif -MKDIR = mkdir - -!message =============================================================================== - -#---------------------------------------------------------- -# build the helper app we need to overcome nmake's limiting -# environment. -#---------------------------------------------------------- - -!if !exist(nmakehlp.exe) -!if [$(cc32) -nologo nmakehlp.c -link -subsystem:console > nul] -!endif -!endif - -#---------------------------------------------------------- -# Test for compiler features -#---------------------------------------------------------- - -### test for optimizations -!if [nmakehlp -c -Ot] -!message *** Compiler has 'Optimizations' -OPTIMIZING = 1 -!else -!message *** Compiler does not have 'Optimizations' -OPTIMIZING = 0 -!endif - -OPTIMIZATIONS = - -!if [nmakehlp -c -Ot] -OPTIMIZATIONS = $(OPTIMIZATIONS) -Ot -!endif - -!if [nmakehlp -c -Oi] -OPTIMIZATIONS = $(OPTIMIZATIONS) -Oi -!endif - -!if [nmakehlp -c -Op] -OPTIMIZATIONS = $(OPTIMIZATIONS) -Op -!endif - -!if [nmakehlp -c -fp:strict] -OPTIMIZATIONS = $(OPTIMIZATIONS) -fp:strict -!endif - -!if [nmakehlp -c -Gs] -OPTIMIZATIONS = $(OPTIMIZATIONS) -Gs -!endif - -!if [nmakehlp -c -GS] -OPTIMIZATIONS = $(OPTIMIZATIONS) -GS -!endif - -!if [nmakehlp -c -GL] -OPTIMIZATIONS = $(OPTIMIZATIONS) -GL -!endif - -DEBUGFLAGS = - -!if [nmakehlp -c -RTC1] -DEBUGFLAGS = $(DEBUGFLAGS) -RTC1 -!elseif [nmakehlp -c -GZ] -DEBUGFLAGS = $(DEBUGFLAGS) -GZ -!endif - -COMPILERFLAGS =-W3 - -# In v13 -GL and -YX are incompatible. -!if [nmakehlp -c -YX] -!if ![nmakehlp -c -GL] -OPTIMIZATIONS = $(OPTIMIZATIONS) -YX -!endif -!endif - -!if "$(MACHINE)" == "IX86" -### test for pentium errata -!if [nmakehlp -c -QI0f] -!message *** Compiler has 'Pentium 0x0f fix' -COMPILERFLAGS = $(COMPILERFLAGSS) -QI0f -!else -!message *** Compiler does not have 'Pentium 0x0f fix' -!endif -!endif - -!if "$(MACHINE)" == "IA64" -### test for Itanium errata -!if [nmakehlp -c -QIA64_Bx] -!message *** Compiler has 'B-stepping errata workarounds' -COMPILERFLAGS = $(COMPILERFLAGS) -QIA64_Bx -!else -!message *** Compiler does not have 'B-stepping errata workarounds' -!endif -!endif - -!if "$(MACHINE)" == "IX86" -### test for -align:4096, when align:512 will do. -!if [nmakehlp -l -opt:nowin98] -!message *** Linker has 'Win98 alignment problem' -ALIGN98_HACK = 1 -!else -!message *** Linker does not have 'Win98 alignment problem' -ALIGN98_HACK = 0 -!endif -!else -ALIGN98_HACK = 0 -!endif - -LINKERFLAGS = - -!if [nmakehlp -l -ltcg] -LINKERFLAGS =-ltcg -!endif - -#---------------------------------------------------------- -# MSVC8 (ships with Visual Studio 2005) generates a manifest -# file that we should link into the binaries. This is how. -#---------------------------------------------------------- - -_VC_MANIFEST_EMBED_EXE= -_VC_MANIFEST_EMBED_DLL= -VCVER=0 -!if ![echo VCVERSION=_MSC_VER > vercl.x] \ - && ![cl -nologo -TC -P vercl.x $(ERRNULL)] -!include vercl.i -!if $(VCVERSION) >= 1500 -VCVER=9 -!elseif $(VCVERSION) >= 1400 -VCVER=8 -!elseif $(VCVERSION) >= 1300 -VCVER=7 -!elseif $(VCVERSION) >= 1200 -VCVER=6 -!endif -!endif - -# Since MSVC8 we must deal with manifest resources. -!if $(VCVERSION) >= 1400 -_VC_MANIFEST_EMBED_EXE=if exist $@.manifest mt -nologo -manifest $@.manifest -outputresource:$@;1 -_VC_MANIFEST_EMBED_DLL=if exist $@.manifest mt -nologo -manifest $@.manifest -outputresource:$@;2 -!endif - -#---------------------------------------------------------- -# Decode the options requested. -#---------------------------------------------------------- - -!if "$(OPTS)" == "" || [nmakehlp -f "$(OPTS)" "none"] -STATIC_BUILD = 0 -TCL_THREADS = 1 -DEBUG = 0 -PROFILE = 0 -MSVCRT = 0 -LOIMPACT = 0 -TCL_USE_STATIC_PACKAGES = 0 -USE_THREAD_ALLOC = 1 -USE_THREAD_STORAGE = 1 -UNCHECKED = 0 -!else -!if [nmakehlp -f $(OPTS) "static"] -!message *** Doing static -STATIC_BUILD = 1 -!else -STATIC_BUILD = 0 -!endif -!if [nmakehlp -f $(OPTS) "msvcrt"] -!message *** Doing msvcrt -MSVCRT = 1 -!else -MSVCRT = 0 -!endif -!if [nmakehlp -f $(OPTS) "staticpkg"] -!message *** Doing staticpkg -TCL_USE_STATIC_PACKAGES = 1 -!else -TCL_USE_STATIC_PACKAGES = 0 -!endif -!if [nmakehlp -f $(OPTS) "nothreads"] -!message *** Compile explicitly for non-threaded tcl -TCL_THREADS = 0 -!else -TCL_THREADS = 1 -!endif -!if [nmakehlp -f $(OPTS) "symbols"] -!message *** Doing symbols -DEBUG = 1 -!else -DEBUG = 0 -!endif -!if [nmakehlp -f $(OPTS) "profile"] -!message *** Doing profile -PROFILE = 1 -!else -PROFILE = 0 -!endif -!if [nmakehlp -f $(OPTS) "loimpact"] -!message *** Doing loimpact -LOIMPACT = 1 -!else -LOIMPACT = 0 -!endif -!if [nmakehlp -f $(OPTS) "thrdalloc"] -!message *** Doing thrdalloc -USE_THREAD_ALLOC = 1 -!else -USE_THREAD_ALLOC = 0 -!endif -!if [nmakehlp -f $(OPTS) "thrdstorage"] -!message *** Doing thrdstorage -USE_THREAD_STORAGE = 1 -!else -USE_THREAD_STORAGE = 0 -!endif -!if [nmakehlp -f $(OPTS) "unchecked"] -!message *** Doing unchecked -UNCHECKED = 1 -!else -UNCHECKED = 0 -!endif -!endif - - -!if !$(STATIC_BUILD) -# Make sure we don't build overly fat DLLs. -MSVCRT = 1 -# We shouldn't statically put the extensions inside the shell when dynamic. -TCL_USE_STATIC_PACKAGES = 0 -!endif - - -#---------------------------------------------------------- -# Figure-out how to name our intermediate and output directories. -# We wouldn't want different builds to use the same .obj files -# by accident. -#---------------------------------------------------------- - -#---------------------------------------- -# Naming convention: -# t = full thread support. -# s = static library (as opposed to an -# import library) -# g = linked to the debug enabled C -# run-time. -# x = special static build when it -# links to the dynamic C run-time. -#---------------------------------------- -SUFX = sgx - -!if $(DEBUG) -BUILDDIRTOP = Debug -!else -BUILDDIRTOP = Release -!endif - -!if "$(MACHINE)" != "IX86" -BUILDDIRTOP =$(BUILDDIRTOP)_$(MACHINE) -!endif -!if $(VCVER) > 6 -BUILDDIRTOP =$(BUILDDIRTOP)_VC$(VCVER) -!endif - -!if !$(DEBUG) || $(DEBUG) && $(UNCHECKED) -SUFX = $(SUFX:g=) -!endif - -TMP_DIRFULL = .\$(BUILDDIRTOP)\$(PROJECT)_ThreadedDynamicStaticX - -!if !$(STATIC_BUILD) -TMP_DIRFULL = $(TMP_DIRFULL:Static=) -SUFX = $(SUFX:s=) -EXT = dll -!if $(MSVCRT) -TMP_DIRFULL = $(TMP_DIRFULL:X=) -SUFX = $(SUFX:x=) -!endif -!else -TMP_DIRFULL = $(TMP_DIRFULL:Dynamic=) -EXT = lib -!if !$(MSVCRT) -TMP_DIRFULL = $(TMP_DIRFULL:X=) -SUFX = $(SUFX:x=) -!endif -!endif - -!if !$(TCL_THREADS) -TMP_DIRFULL = $(TMP_DIRFULL:Threaded=) -SUFX = $(SUFX:t=) -!endif - -!ifndef TMP_DIR -TMP_DIR = $(TMP_DIRFULL) -!ifndef OUT_DIR -OUT_DIR = .\$(BUILDDIRTOP) -!endif -!else -!ifndef OUT_DIR -OUT_DIR = $(TMP_DIR) -!endif -!endif - - -#---------------------------------------------------------- -# Decode the statistics requested. -#---------------------------------------------------------- - -!if "$(STATS)" == "" || [nmakehlp -f "$(STATS)" "none"] -TCL_MEM_DEBUG = 0 -TCL_COMPILE_DEBUG = 0 -!else -!if [nmakehlp -f $(STATS) "memdbg"] -!message *** Doing memdbg -TCL_MEM_DEBUG = 1 -!else -TCL_MEM_DEBUG = 0 -!endif -!if [nmakehlp -f $(STATS) "compdbg"] -!message *** Doing compdbg -TCL_COMPILE_DEBUG = 1 -!else -TCL_COMPILE_DEBUG = 0 -!endif -!endif - - -#---------------------------------------------------------- -# Decode the checks requested. -#---------------------------------------------------------- - -!if "$(CHECKS)" == "" || [nmakehlp -f "$(CHECKS)" "none"] -TCL_NO_DEPRECATED = 0 -WARNINGS = -W3 -!else -!if [nmakehlp -f $(CHECKS) "nodep"] -!message *** Doing nodep check -TCL_NO_DEPRECATED = 1 -!else -TCL_NO_DEPRECATED = 0 -!endif -!if [nmakehlp -f $(CHECKS) "fullwarn"] -!message *** Doing full warnings check -WARNINGS = -W4 -!if [nmakehlp -l -warn:3] -LINKERFLAGS = $(LINKERFLAGS) -warn:3 -!endif -!else -WARNINGS = -W3 -!endif -!if [nmakehlp -f $(CHECKS) "64bit"] && [nmakehlp -c -Wp64] -!message *** Doing 64bit portability warnings -WARNINGS = $(WARNINGS) -Wp64 -!endif -!endif - -#---------------------------------------------------------- -# Set our defines now armed with our options. -#---------------------------------------------------------- - -OPTDEFINES = -DTCL_CFGVAL_ENCODING=$(CFG_ENCODING) -DSTDC_HEADERS - -!if $(TCL_MEM_DEBUG) -OPTDEFINES = $(OPTDEFINES) -DTCL_MEM_DEBUG -!endif -!if $(TCL_COMPILE_DEBUG) -OPTDEFINES = $(OPTDEFINES) -DTCL_COMPILE_DEBUG -DTCL_COMPILE_STATS -!endif -!if $(TCL_THREADS) -OPTDEFINES = $(OPTDEFINES) -DTCL_THREADS=1 -!if $(USE_THREAD_ALLOC) -OPTDEFINES = $(OPTDEFINES) -DUSE_THREAD_ALLOC=1 -!endif -!if $(USE_THREAD_STORAGE) -OPTDEFINES = $(OPTDEFINES) -DUSE_THREAD_STORAGE=1 -!endif -!endif -!if $(STATIC_BUILD) -OPTDEFINES = $(OPTDEFINES) -DSTATIC_BUILD -!endif -!if $(TCL_NO_DEPRECATED) -OPTDEFINES = $(OPTDEFINES) -DTCL_NO_DEPRECATED -!endif - -!if $(DEBUG) -OPTDEFINES = $(OPTDEFINES) -DTCL_CFG_DEBUG -!elseif $(OPTIMIZING) -OPTDEFINES = $(OPTDEFINES) -DTCL_CFG_OPTIMIZED -!endif -!if $(PROFILE) -OPTDEFINES = $(OPTDEFINES) -DTCL_CFG_PROFILED -!endif -!if "$(MACHINE)" == "IA64" || "$(MACHINE)" == "AMD64" -OPTDEFINES = $(OPTDEFINES) -DTCL_CFG_DO64BIT -!endif - - -#---------------------------------------------------------- -# Get common info used when building extensions. -#---------------------------------------------------------- - -!if "$(PROJECT)" != "tcl" - -# If INSTALLDIR set to tcl root dir then reset to the lib dir. -!if exist("$(_INSTALLDIR)\include\tcl.h") -_INSTALLDIR=$(_INSTALLDIR)\lib -!endif - -!if !defined(TCLDIR) -!if exist("$(_INSTALLDIR)\..\include\tcl.h") -TCLINSTALL = 1 -_TCLDIR = $(_INSTALLDIR)\.. -_TCL_H = $(_INSTALLDIR)\..\include\tcl.h -TCLDIR = $(_INSTALLDIR)\.. -!else -MSG=^ -Failed to find tcl.h. Set the TCLDIR macro. -!error $(MSG) -!endif -!else -_TCLDIR = $(TCLDIR:/=\) -!if exist("$(_TCLDIR)\include\tcl.h") -TCLINSTALL = 1 -_TCL_H = $(_TCLDIR)\include\tcl.h -!elseif exist("$(_TCLDIR)\generic\tcl.h") -TCLINSTALL = 0 -_TCL_H = $(_TCLDIR)\generic\tcl.h -!else -MSG =^ -Failed to find tcl.h. The TCLDIR macro does not appear correct. -!error $(MSG) -!endif -!endif - -!if [echo REM = This file is generated from rules.vc > version.vc] -!endif -!if exist("$(_TCL_H)") -!if [echo TCL_DOTVERSION = \>> version.vc] \ - && [nmakehlp -V "$(_TCL_H)" TCL_VERSION >> version.vc] -!endif -!endif -!include version.vc -TCL_VERSION = $(TCL_DOTVERSION:.=) - -!if $(TCLINSTALL) -TCLSH = "$(_TCLDIR)\bin\tclsh$(TCL_VERSION)$(SUFX).exe" -!if !exist($(TCLSH)) && $(TCL_THREADS) -TCLSH = "$(_TCLDIR)\bin\tclsh$(TCL_VERSION)t$(SUFX).exe" -!endif -TCLSTUBLIB = "$(_TCLDIR)\lib\tclstub$(TCL_VERSION).lib" -TCLIMPLIB = "$(_TCLDIR)\lib\tcl$(TCL_VERSION)$(SUFX).lib" -TCL_LIBRARY = $(_TCLDIR)\lib -TCL_INCLUDES = -I"$(_TCLDIR)\include" -!else -TCLSH = "$(_TCLDIR)\win\$(BUILDDIRTOP)\tclsh$(TCL_VERSION)$(SUFX).exe" -!if !exist($(TCLSH)) && $(TCL_THREADS) -TCLSH = "$(_TCLDIR)\win\$(BUILDDIRTOP)\tclsh$(TCL_VERSION)t$(SUFX).exe" -!endif -TCLSTUBLIB = "$(_TCLDIR)\win\$(BUILDDIRTOP)\tclstub$(TCL_VERSION).lib" -TCLIMPLIB = "$(_TCLDIR)\win\$(BUILDDIRTOP)\tcl$(TCL_VERSION)$(SUFX).lib" -TCL_LIBRARY = $(_TCLDIR)\library -TCL_INCLUDES = -I"$(_TCLDIR)\generic" -I"$(_TCLDIR)\win" -!endif - -!endif - -#---------------------------------------------------------- -# Optionally check for Tk info for building extensions. -#---------------------------------------------------------- - -!ifdef PROJECT_REQUIRES_TK -!if "$(PROJECT)" != "tcl" && "$(PROJECT)" != "tk" - -!if !defined(TKDIR) -!if exist("$(_INSTALLDIR)\..\include\tk.h") -TKINSTALL = 1 -_TKDIR = $(_INSTALLDIR)\.. -_TK_H = $(_TKDIR)\include\tk.h -TKDIR = $(_TKDIR) -!elseif exist("$(_TCLDIR)\include\tk.h") -TKINSTALL = 1 -_TKDIR = $(_TCLDIR) -_TK_H = $(_TKDIR)\include\tk.h -TKDIR = $(_TKDIR) -!endif -!else -_TKDIR = $(TKDIR:/=\) -!if exist("$(_TKDIR)\include\tk.h") -TKINSTALL = 1 -_TK_H = $(_TKDIR)\include\tk.h -!elseif exist("$(_TKDIR)\generic\tk.h") -TKINSTALL = 0 -_TK_H = $(_TKDIR)\generic\tk.h -!else -MSG =^ -Failed to find tk.h. The TKDIR macro does not appear correct. -!error $(MSG) -!endif -!endif - -!if defined(TKDIR) -TK_DOTVERSION = 8.4 -!if exist("$(_TK_H)") -!if [echo TK_DOTVERSION = \>> version.vc] \ - && [nmakehlp -V "$(_TK_H)" TK_VERSION >> version.vc] -!endif -!endif -!include version.vc -TK_VERSION = $(TK_DOTVERSION:.=) - -!if $(TKINSTALL) -WISH = "$(_TKDIR)\bin\wish$(TK_VERSION)$(SUFX).exe" -!if !exist($(WISH)) && $(TCL_THREADS) -WISH = "$(_TKDIR)\bin\wish$(TK_VERSION)t$(SUFX).exe" -!endif -TKSTUBLIB = "$(_TKDIR)\lib\tkstub$(TK_VERSION).lib" -TKIMPLIB = "$(_TKDIR)\lib\tk$(TK_VERSION)$(SUFX).lib" -TK_INCLUDES = -I"$(_TKDIR)\include" -TK_LIBRARY = $(_TKDIR)\lib -!else -WISH = "$(_TKDIR)\win\$(BUILDDIRTOP)\wish$(TCL_VERSION)$(SUFX).exe" -!if !exist($(WISH)) && $(TCL_THREADS) -WISH = "$(_TKDIR)\win\$(BUILDDIRTOP)\wish$(TCL_VERSION)t$(SUFX).exe" -!endif -TKSTUBLIB = "$(_TKDIR)\win\$(BUILDDIRTOP)\tkstub$(TCL_VERSION).lib" -TKIMPLIB = "$(_TKDIR)\win\$(BUILDDIRTOP)\tk$(TCL_VERSION)$(SUFX).lib" -TK_INCLUDES = -I"$(_TKDIR)\generic" -I"$(_TKDIR)\win" -I"$(_TKDIR)\xlib" -TK_LIBRARY = $(_TKDIR)\library -!endif - -!endif -!endif -!endif - - -#---------------------------------------------------------- -# Setup the fully qualified OUT_DIR path as OUT_DIR_PATH -#---------------------------------------------------------- -!if [echo OUT_DIR_PATH = \>> version.vc] \ - && [nmakehlp -Q "$(OUT_DIR)" >> version.vc] -!endif -!include version.vc - - -#---------------------------------------------------------- -# Display stats being used. -#---------------------------------------------------------- - -!message *** Intermediate directory will be '$(TMP_DIR)' -!message *** Output directory will be '$(OUT_DIR)' -!message *** Suffix for binaries will be '$(SUFX)' -!message *** Optional defines are '$(OPTDEFINES)' -!message *** Compiler version $(VCVER). Target machine is $(MACHINE) -!message *** Compiler options '$(COMPILERFLAGS) $(OPTIMIZATIONS) $(DEBUGFLAGS) $(WARNINGS)' -!message *** Link options '$(LINKERFLAGS)' - -!endif DELETED win/tls.rc Index: win/tls.rc ================================================================== --- win/tls.rc +++ /dev/null @@ -1,40 +0,0 @@ -// tls.rc - Copyright (C) 2004 Pat Thoyts -// -// Note: the version numbers in here are all provided from the makefile. -// No editing required. -// -// $Id: tls.rc,v 1.1 2004/12/17 16:02:06 patthoyts Exp $ - -#include - -VS_VERSION_INFO VERSIONINFO - FILEVERSION COMMAVERSION - PRODUCTVERSION COMMAVERSION - FILEFLAGSMASK 0x3fL -#ifdef DEBUG - FILEFLAGS VS_FF_DEBUG -#else - FILEFLAGS 0x0L -#endif - FILEOS VOS__WINDOWS32 - FILETYPE VFT_DLL - FILESUBTYPE 0x0L -BEGIN - BLOCK "StringFileInfo" - BEGIN - BLOCK "040904b0" /* LANG_ENGLISH/SUBLANG_ENGLISH_US, Unicode CP */ - BEGIN - VALUE "FileDescription", "SSL and TLS support for Tcl\0" - VALUE "OriginalFilename", "tls" VERSION ".dll\0" - VALUE "FileVersion", DOTVERSION "\0" - VALUE "LegalCopyright", "Copyright \251 1997-1999 Matt Newman, et al.\0" - VALUE "ProductName", "TLS " DOTVERSION " for Windows\0" - VALUE "ProductVersion", DOTVERSION "\0" - VALUE "Comments", "http://sourceforge.net/projects/tls\0" - END - END - BLOCK "VarFileInfo" - BEGIN - VALUE "Translation", 0x409, 1200 - END -END