ADDED .fossil-settings/manifest Index: .fossil-settings/manifest ================================================================== --- /dev/null +++ .fossil-settings/manifest @@ -0,0 +1,1 @@ +u Index: configure.ac ================================================================== --- configure.ac +++ configure.ac @@ -1,7 +1,7 @@ dnl Define ourselves -AC_INIT(tcltls, 1.8.0) +AC_INIT([tcltls],[1.8.0]) dnl Checks for programs. AC_PROG_CC AC_PROG_MAKE_SET AC_PROG_INSTALL @@ -251,6 +251,7 @@ WEAKENSYMS=':' REMOVESYMS=':' fi dnl Produce output -AC_OUTPUT(Makefile pkgIndex.tcl tcltls.syms) +AC_CONFIG_FILES([Makefile pkgIndex.tcl tcltls.syms]) +AC_OUTPUT Index: tls.c ================================================================== --- tls.c +++ tls.c @@ -36,32 +36,32 @@ #define F2N( key, dsp) \ (((key) == NULL) ? (char *) NULL : \ Tcl_TranslateFileName(interp, (key), (dsp))) #define REASON() ERR_reason_error_string(ERR_get_error()) -static void InfoCallback(CONST SSL *ssl, int where, int ret); +static void InfoCallback(const SSL *ssl, int where, int ret); static int CiphersObjCmd(ClientData clientData, - Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[]); + Tcl_Interp *interp, int objc, Tcl_Obj *const objv[]); static int HandshakeObjCmd(ClientData clientData, - Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[]); + Tcl_Interp *interp, int objc, Tcl_Obj *const objv[]); static int ImportObjCmd(ClientData clientData, - Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[]); + Tcl_Interp *interp, int objc, Tcl_Obj *const objv[]); static int StatusObjCmd(ClientData clientData, - Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[]); + Tcl_Interp *interp, int objc, Tcl_Obj *const objv[]); static int VersionObjCmd(ClientData clientData, - Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[]); + Tcl_Interp *interp, int objc, Tcl_Obj *const objv[]); static int MiscObjCmd(ClientData clientData, - Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[]); + Tcl_Interp *interp, int objc, Tcl_Obj *const objv[]); static int UnimportObjCmd(ClientData clientData, - Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[]); + Tcl_Interp *interp, int objc, Tcl_Obj *const objv[]); static SSL_CTX *CTX_Init(State *statePtr, int isServer, int proto, char *key, char *certfile, unsigned char *key_asn1, unsigned char *cert_asn1, int key_asn1_len, int cert_asn1_len, char *CAdir, char *CAfile, char *ciphers, char *DHparams); @@ -169,11 +169,11 @@ * Side effects: * Calls callback (if defined) *------------------------------------------------------------------- */ static void -InfoCallback(CONST SSL *ssl, int where, int ret) +InfoCallback(const SSL *ssl, int where, int ret) { State *statePtr = (State*)SSL_get_app_data((SSL *)ssl); Tcl_Obj *cmdPtr; char *major; char *minor; @@ -226,11 +226,11 @@ if (where & (SSL_CB_LOOP|SSL_CB_EXIT)) { Tcl_ListObjAppendElement( statePtr->interp, cmdPtr, Tcl_NewStringObj( SSL_state_string_long(ssl), -1) ); } else if (where & SSL_CB_ALERT) { - CONST char *cp = (char *) SSL_alert_desc_string_long(ret); + const char *cp = (char *) SSL_alert_desc_string_long(ret); Tcl_ListObjAppendElement( statePtr->interp, cmdPtr, Tcl_NewStringObj( cp, -1) ); } else { Tcl_ListObjAppendElement( statePtr->interp, cmdPtr, @@ -495,13 +495,13 @@ static int CiphersObjCmd(clientData, interp, objc, objv) ClientData clientData; /* Not used. */ Tcl_Interp *interp; int objc; - Tcl_Obj *CONST objv[]; + Tcl_Obj *const objv[]; { - static CONST84 char *protocols[] = { + static const char *protocols[] = { "ssl2", "ssl3", "tls1", "tls1.1", "tls1.2", "tls1.3", NULL }; enum protocol { TLS_SSL2, TLS_SSL3, TLS_TLS1, TLS_TLS1_1, TLS_TLS1_2, TLS_TLS1_3, TLS_NONE }; @@ -635,14 +635,14 @@ * May force SSL negotiation to take place. * *------------------------------------------------------------------- */ -static int HandshakeObjCmd(ClientData clientData, Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[]) { +static int HandshakeObjCmd(ClientData clientData, Tcl_Interp *interp, int objc, Tcl_Obj *const objv[]) { Tcl_Channel chan; /* The channel to set a mode on. */ State *statePtr; /* client state for ssl socket */ - CONST char *errStr = NULL; + const char *errStr = NULL; int ret = 1; int err = 0; dprintf("Called"); @@ -724,11 +724,11 @@ static int ImportObjCmd(clientData, interp, objc, objv) ClientData clientData; /* Not used. */ Tcl_Interp *interp; int objc; - Tcl_Obj *CONST objv[]; + Tcl_Obj *const objv[]; { Tcl_Channel chan; /* The channel to set a mode on. */ State *statePtr; /* client state for ssl socket */ SSL_CTX *ctx = NULL; Tcl_Obj *script = NULL; @@ -964,11 +964,11 @@ /* * SSL Callbacks */ - SSL_set_app_data(statePtr->ssl, (VOID *)statePtr); /* point back to us */ + SSL_set_app_data(statePtr->ssl, (void *)statePtr); /* point back to us */ SSL_set_verify(statePtr->ssl, verify, VerifyCallback); SSL_CTX_set_info_callback(statePtr->ctx, InfoCallback); @@ -1014,11 +1014,11 @@ static int UnimportObjCmd(clientData, interp, objc, objv) ClientData clientData; /* Not used. */ Tcl_Interp *interp; int objc; - Tcl_Obj *CONST objv[]; + Tcl_Obj *const objv[]; { Tcl_Channel chan; /* The channel to set a mode on. */ dprintf("Called"); @@ -1209,11 +1209,11 @@ SSL_CTX_set_min_proto_version (ctx, TLS1_3_VERSION); SSL_CTX_set_max_proto_version (ctx, TLS1_3_VERSION); } #endif - SSL_CTX_set_app_data( ctx, (VOID*)interp); /* remember the interpreter */ + SSL_CTX_set_app_data( ctx, (void*)interp); /* remember the interpreter */ SSL_CTX_set_options( ctx, SSL_OP_ALL); /* all SSL bug workarounds */ SSL_CTX_set_options( ctx, off); /* all SSL bug workarounds */ SSL_CTX_sess_set_cache_size( ctx, 128); if (ciphers != NULL) @@ -1401,11 +1401,11 @@ static int StatusObjCmd(clientData, interp, objc, objv) ClientData clientData; /* Not used. */ Tcl_Interp *interp; int objc; - Tcl_Obj *CONST objv[]; + Tcl_Obj *const objv[]; { State *statePtr; X509 *peer; Tcl_Obj *objPtr; Tcl_Channel chan; @@ -1495,11 +1495,11 @@ static int VersionObjCmd(clientData, interp, objc, objv) ClientData clientData; /* Not used. */ Tcl_Interp *interp; int objc; - Tcl_Obj *CONST objv[]; + Tcl_Obj *const objv[]; { Tcl_Obj *objPtr; dprintf("Called"); @@ -1528,13 +1528,13 @@ static int MiscObjCmd(clientData, interp, objc, objv) ClientData clientData; /* Not used. */ Tcl_Interp *interp; int objc; - Tcl_Obj *CONST objv[]; + Tcl_Obj *const objv[]; { - static CONST84 char *commands [] = { "req", NULL }; + static const char *commands [] = { "req", NULL }; enum command { C_REQ, C_DUMMY }; int cmd; dprintf("Called"); Index: tlsBIO.c ================================================================== --- tlsBIO.c +++ tlsBIO.c @@ -29,16 +29,16 @@ /* * Forward declarations */ -static int BioWrite _ANSI_ARGS_((BIO *h, CONST char *buf, int num)); -static int BioRead _ANSI_ARGS_((BIO *h, char *buf, int num)); -static int BioPuts _ANSI_ARGS_((BIO *h, CONST char *str)); -static long BioCtrl _ANSI_ARGS_((BIO *h, int cmd, long arg1, void *ptr)); -static int BioNew _ANSI_ARGS_((BIO *h)); -static int BioFree _ANSI_ARGS_((BIO *h)); +static int BioWrite (BIO *h, const char *buf, int num); +static int BioRead (BIO *h, char *buf, int num); +static int BioPuts (BIO *h, const char *str); +static long BioCtrl (BIO *h, int cmd, long arg1, void *ptr); +static int BioNew (BIO *h); +static int BioFree (BIO *h); BIO *BIO_new_tcl(State *statePtr, int flags) { BIO *bio; static BIO_METHOD *BioMethods = NULL; #ifdef TCLTLS_SSL_USE_FASTPATH @@ -108,11 +108,11 @@ BIO_set_init(bio, 1); return(bio); } -static int BioWrite(BIO *bio, CONST char *buf, int bufLen) { +static int BioWrite(BIO *bio, const char *buf, int bufLen) { Tcl_Channel chan; int ret; int tclEofChan, tclErrno; chan = Tls_GetParent((State *) BIO_get_data(bio), 0); @@ -212,11 +212,11 @@ dprintf("BioRead(%p, , %d) [%p] returning %i", (void *) bio, bufLen, (void *) chan, ret); return(ret); } -static int BioPuts(BIO *bio, CONST char *str) { +static int BioPuts(BIO *bio, const char *str) { dprintf("BioPuts(%p, ) called", bio, str); return BioWrite(bio, str, (int) strlen(str)); } Index: tlsIO.c ================================================================== --- tlsIO.c +++ tlsIO.c @@ -20,22 +20,22 @@ #include "tlsInt.h" /* * Forward declarations */ -static int TlsBlockModeProc _ANSI_ARGS_((ClientData instanceData, int mode)); -static int TlsCloseProc _ANSI_ARGS_((ClientData instanceData, Tcl_Interp *interp)); -static int TlsInputProc _ANSI_ARGS_((ClientData instanceData, char *buf, int bufSize, int *errorCodePtr)); -static int TlsOutputProc _ANSI_ARGS_((ClientData instanceData, CONST char *buf, int toWrite, int *errorCodePtr)); -static int TlsGetOptionProc _ANSI_ARGS_((ClientData instanceData, Tcl_Interp *interp, CONST84 char *optionName, Tcl_DString *dsPtr)); -static void TlsWatchProc _ANSI_ARGS_((ClientData instanceData, int mask)); -static int TlsGetHandleProc _ANSI_ARGS_((ClientData instanceData, int direction, ClientData *handlePtr)); -static int TlsNotifyProc _ANSI_ARGS_((ClientData instanceData, int mask)); +static int TlsBlockModeProc (ClientData instanceData, int mode); +static int TlsCloseProc (ClientData instanceData, Tcl_Interp *interp); +static int TlsInputProc (ClientData instanceData, char *buf, int bufSize, int *errorCodePtr); +static int TlsOutputProc (ClientData instanceData, const char *buf, int toWrite, int *errorCodePtr); +static int TlsGetOptionProc (ClientData instanceData, Tcl_Interp *interp, const char *optionName, Tcl_DString *dsPtr); +static void TlsWatchProc (ClientData instanceData, int mask); +static int TlsGetHandleProc (ClientData instanceData, int direction, ClientData *handlePtr); +static int TlsNotifyProc (ClientData instanceData, int mask); #if 0 -static void TlsChannelHandler _ANSI_ARGS_((ClientData clientData, int mask)); +static void TlsChannelHandler (ClientData clientData, int mask); #endif -static void TlsChannelHandlerTimer _ANSI_ARGS_((ClientData clientData)); +static void TlsChannelHandlerTimer (ClientData clientData); /* * TLS Channel Type */ static Tcl_ChannelType *tlsChannelType = NULL; @@ -78,11 +78,11 @@ * against an older variant. */ size = sizeof(Tcl_ChannelType); /* Base size */ tlsChannelType = (Tcl_ChannelType *) ckalloc(size); - memset((VOID *) tlsChannelType, 0, size); + memset(tlsChannelType, 0, size); /* * Common elements of the structure (no changes in location or name) * close2Proc, seekProc, setOptionProc stay NULL. */ @@ -104,11 +104,11 @@ * For the 8.3.2 core we present ourselves as a version 2 * driver. This means a special value in version (ex * blockModeProc), blockModeProc in a different place and of * course usage of the handlerProc. */ - tlsChannelType->version = TCL_CHANNEL_VERSION_2; + tlsChannelType->version = TCL_CHANNEL_VERSION_5; tlsChannelType->blockModeProc = TlsBlockModeProc; tlsChannelType->handlerProc = TlsNotifyProc; } return(tlsChannelType); @@ -499,11 +499,11 @@ * Writes output on the output device of the channel. * *------------------------------------------------------------------- */ -static int TlsOutputProc(ClientData instanceData, CONST char *buf, int toWrite, int *errorCodePtr) { +static int TlsOutputProc(ClientData instanceData, const char *buf, int toWrite, int *errorCodePtr) { unsigned long backingError; State *statePtr = (State *) instanceData; int written, err; int tlsConnect; @@ -641,11 +641,11 @@ *------------------------------------------------------------------- */ static int TlsGetOptionProc(ClientData instanceData, /* Socket state. */ Tcl_Interp *interp, /* For errors - can be NULL. */ - CONST84 char *optionName, /* Name of the option to + const char *optionName, /* Name of the option to * retrieve the value for, or * NULL to get all options and * their values. */ Tcl_DString *dsPtr) /* Where to store the computed value * initialized by caller. */ Index: tlsInt.h ================================================================== --- tlsInt.h +++ tlsInt.h @@ -27,15 +27,10 @@ #define WIN32_LEAN_AND_MEAN #include #include /* OpenSSL needs this on Windows */ #endif -/* Handle tcl8.3->tcl8.4 CONST changes */ -#ifndef CONST84 -#define CONST84 -#endif - #ifdef NO_PATENTS # define NO_IDEA # define NO_RC2 # define NO_RC4 # define NO_RC5 Index: win/README.txt ================================================================== --- win/README.txt +++ win/README.txt @@ -1,64 +1,64 @@ - Windows DLL Build instructions using nmake build system - 2020-10-15 Harald.Oehlmann@elmicron.de - -Properties: -- 32 bit DLL -- VisualStudio 2015 -Note: Vuisual C++ 6 does not build OpenSSL (long long syntax error) -- Cygwin32 (temporary helper, please help to replace by tclsh) -- OpenSSL statically linked to TCLTLS DLL. -Note: Dynamic linking also works but results in a DLL dependeny on OPENSSL DLL's - -1) Build OpenSSL static libraries: - -OpenSSL source distribtution unpacked in: -c:\test\tcltls\Openssl_1_1_1h - -- Install Perl from http://strawberryperl.com/download/5.32.0.1/strawberry-perl-5.32.0.1-32bit.msi - to C:\perl - (ActivePerl failed due to missing 32 bit console module) -- Install NASM Assembler: - -https://www.nasm.us/pub/nasm/releasebuilds/2.15.05/win32/nasm-2.15.05-installer-x86.exe - to C:\Program Files (x86)\NASM - --> Visual Studio x86 native prompt. - -set Path=%PATH%;C:\Program Files (x86)\NASM;C:\Perl\perl\bin - -perl Configure VC-WIN32 --prefix=c:\test\tcltls\openssl --openssldir=c:\test\tcltls\openssldir no-shared no-filenames threads - -nmake -nmake test -namke install - -2) Build TCLTLS - -Unzip distribution in: -c:\test\tcltls\tcltls-1.7.22 - --> start cygwin bash prompt - -cd /cygdrive/c/test/tcltls/tcltls-1.7.22 -./gen_dh_params > dh_params.h - -od -A n -v -t xC < 'tls.tcl' > tls.tcl.h.new.1 -sed 's@[^0-9A-Fa-f]@@g;s@..@0x&, @g' < tls.tcl.h.new.1 > tls.tcl.h -rm -f tls.tcl.h.new.1 - --> Visual Studio x86 native prompt. - -cd C:\test\tcltls\tcltls-1.7.22\win - -nmake -f makefile.vc TCLDIR=c:\test\tcl8610 SSL_INSTALL_FOLDER=C:\test\tcltls\openssl - -nmake -f makefile.vc install TCLDIR=c:\test\tcl8610 INSTALLDIR=c:\test\tcltls SSL_INSTALL_FOLDER=C:\test\tcltls\openssl - -3) Test - -Start tclsh or wish - -lappend auto_path {C:\test\tcltls\tls1.7.22} -package require tls - -A small "1.7.22" showing up is hopefully the end of this long way... + Windows DLL Build instructions using nmake build system + 2020-10-15 Harald.Oehlmann@elmicron.de + +Properties: +- 32 bit DLL +- VisualStudio 2015 +Note: Visual C++ 6 does not build OpenSSL (long long syntax error) +- Cygwin32 (temporary helper, please help to replace by tclsh) +- OpenSSL statically linked to TCLTLS DLL. +Note: Dynamic linking also works but results in a DLL dependeny on OPENSSL DLL's + +1) Build OpenSSL static libraries: + +OpenSSL source distribtution unpacked in: +c:\test\tcltls\Openssl_1_1_1h + +- Install Perl from http://strawberryperl.com/download/5.32.0.1/strawberry-perl-5.32.0.1-32bit.msi + to C:\perl + (ActivePerl failed due to missing 32 bit console module) +- Install NASM Assembler: + +https://www.nasm.us/pub/nasm/releasebuilds/2.15.05/win32/nasm-2.15.05-installer-x86.exe + to C:\Program Files (x86)\NASM + +-> Visual Studio x86 native prompt. + +set Path=%PATH%;C:\Program Files (x86)\NASM;C:\Perl\perl\bin + +perl Configure VC-WIN32 --prefix=c:\test\tcltls\openssl --openssldir=c:\test\tcltls\openssldir no-shared no-filenames threads + +nmake +nmake test +namke install + +2) Build TCLTLS + +Unzip distribution in: +c:\test\tcltls\tcltls-1.8.0 + +-> start cygwin bash prompt + +cd /cygdrive/c/test/tcltls/tcltls-1.8.0 +./gen_dh_params > dh_params.h + +od -A n -v -t xC < 'tls.tcl' > tls.tcl.h.new.1 +sed 's@[^0-9A-Fa-f]@@g;s@..@0x&, @g' < tls.tcl.h.new.1 > tls.tcl.h +rm -f tls.tcl.h.new.1 + +-> Visual Studio x86 native prompt. + +cd C:\test\tcltls\tcltls-1.8.0\win + +nmake -f makefile.vc TCLDIR=c:\test\tcl8610 SSL_INSTALL_FOLDER=C:\test\tcltls\openssl + +nmake -f makefile.vc install TCLDIR=c:\test\tcl8610 INSTALLDIR=c:\test\tcltls SSL_INSTALL_FOLDER=C:\test\tcltls\openssl + +3) Test + +Start tclsh or wish + +lappend auto_path {C:\test\tcltls\tls1.8.0} +package require tls + +A small "1.8.0" showing up is hopefully the end of this long way... ADDED win/gitmanifest.in Index: win/gitmanifest.in ================================================================== --- /dev/null +++ win/gitmanifest.in @@ -0,0 +1,1 @@ +git- Index: win/makefile.vc ================================================================== --- win/makefile.vc +++ win/makefile.vc @@ -1,10 +1,10 @@ # call nmake with additional parameter SSL_INSTALL_FOLDER= with the # OpenSSL instalation folder following. PROJECT=tls -DOTVERSION = 1.7.22 +DOTVERSION = 1.8.0 PRJ_INCLUDES = -I"$(SSL_INSTALL_FOLDER)\include" PRJ_DEFINES = -D NO_SSL2 -D NO_SSL3 -D _CRT_SECURE_NO_WARNINGS PRJ_LIBS = \ ADDED win/rules-ext.vc Index: win/rules-ext.vc ================================================================== --- /dev/null +++ win/rules-ext.vc @@ -0,0 +1,123 @@ +# This file should only be included in makefiles for Tcl extensions, +# NOT in the makefile for Tcl itself. + +!ifndef _RULES_EXT_VC + +# We need to run from the directory the parent makefile is located in. +# nmake does not tell us what makefile was used to invoke it so parent +# makefile has to set the MAKEFILEVC macro or we just make a guess and +# warn if we think that is not the case. +!if "$(MAKEFILEVC)" == "" + +!if exist("$(PROJECT).vc") +MAKEFILEVC = $(PROJECT).vc +!elseif exist("makefile.vc") +MAKEFILEVC = makefile.vc +!endif +!endif # "$(MAKEFILEVC)" == "" + +!if !exist("$(MAKEFILEVC)") +MSG = ^ +You must run nmake from the directory containing the project makefile.^ +If you are doing that and getting this message, set the MAKEFILEVC^ +macro to the name of the project makefile. +!message WARNING: $(MSG) +!endif + +!if "$(PROJECT)" == "tcl" +!error The rules-ext.vc file is not intended for Tcl itself. +!endif + +# We extract version numbers using the nmakehlp program. For now use +# the local copy of nmakehlp. Once we locate Tcl, we will use that +# one if it is newer. +!if "$(MACHINE)" == "IX86" || "$(MACHINE)" == "$(NATIVE_ARCH)" +!if [$(CC) -nologo -DNDEBUG "nmakehlp.c" -link -subsystem:console > nul] +!endif +!else +!if [copy x86_64-w64-mingw32-nmakehlp.exe nmakehlp.exe >NUL] +!endif +!endif + +# First locate the Tcl directory that we are working with. +!if "$(TCLDIR)" != "" + +_RULESDIR = $(TCLDIR:/=\) + +!else + +# If an installation path is specified, that is also the Tcl directory. +# Also Tk never builds against an installed Tcl, it needs Tcl sources +!if defined(INSTALLDIR) && "$(PROJECT)" != "tk" +_RULESDIR=$(INSTALLDIR:/=\) +!else +# Locate Tcl sources +!if [echo _RULESDIR = \> nmakehlp.out] \ + || [nmakehlp -L generic\tcl.h >> nmakehlp.out] +_RULESDIR = ..\..\tcl +!else +!include nmakehlp.out +!endif + +!endif # defined(INSTALLDIR).... + +!endif # ifndef TCLDIR + +# Now look for the targets.vc file under the Tcl root. Note we check this +# file and not rules.vc because the latter also exists on older systems. +!if exist("$(_RULESDIR)\lib\nmake\targets.vc") # Building against installed Tcl +_RULESDIR = $(_RULESDIR)\lib\nmake +!elseif exist("$(_RULESDIR)\win\targets.vc") # Building against Tcl sources +_RULESDIR = $(_RULESDIR)\win +!else +# If we have not located Tcl's targets file, most likely we are compiling +# against an older version of Tcl and so must use our own support files. +_RULESDIR = . +!endif + +!if "$(_RULESDIR)" != "." +# Potentially using Tcl's support files. If this extension has its own +# nmake support files, need to compare the versions and pick newer. + +!if exist("rules.vc") # The extension has its own copy + +!if [echo TCL_RULES_MAJOR = \> versions.vc] \ + && [nmakehlp -V "$(_RULESDIR)\rules.vc" RULES_VERSION_MAJOR >> versions.vc] +!endif +!if [echo TCL_RULES_MINOR = \>> versions.vc] \ + && [nmakehlp -V "$(_RULESDIR)\rules.vc" RULES_VERSION_MINOR >> versions.vc] +!endif + +!if [echo OUR_RULES_MAJOR = \>> versions.vc] \ + && [nmakehlp -V "rules.vc" RULES_VERSION_MAJOR >> versions.vc] +!endif +!if [echo OUR_RULES_MINOR = \>> versions.vc] \ + && [nmakehlp -V "rules.vc" RULES_VERSION_MINOR >> versions.vc] +!endif +!include versions.vc +# We have a newer version of the support files, use them +!if ($(TCL_RULES_MAJOR) != $(OUR_RULES_MAJOR)) || ($(TCL_RULES_MINOR) < $(OUR_RULES_MINOR)) +_RULESDIR = . +!endif + +!endif # if exist("rules.vc") + +!endif # if $(_RULESDIR) != "." + +# Let rules.vc know what copy of nmakehlp.c to use. +NMAKEHLPC = $(_RULESDIR)\nmakehlp.c + +# Get rid of our internal defines before calling rules.vc +!undef TCL_RULES_MAJOR +!undef TCL_RULES_MINOR +!undef OUR_RULES_MAJOR +!undef OUR_RULES_MINOR + +!if exist("$(_RULESDIR)\rules.vc") +!message *** Using $(_RULESDIR)\rules.vc +!include "$(_RULESDIR)\rules.vc" +!else +!error *** Could not locate rules.vc in $(_RULESDIR) +!endif + +!endif # _RULES_EXT_VC ADDED win/rules.vc Index: win/rules.vc ================================================================== --- /dev/null +++ win/rules.vc @@ -0,0 +1,1915 @@ +#------------------------------------------------------------- -*- makefile -*- +# rules.vc -- +# +# Part of the nmake based build system for Tcl and its extensions. +# This file does all the hard work in terms of parsing build options, +# compiler switches, defining common targets and macros. The Tcl makefile +# directly includes this. Extensions include it via "rules-ext.vc". +# +# See TIP 477 (https://core.tcl-lang.org/tips/doc/main/tip/477.md) for +# detailed documentation. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# +# Copyright (c) 2001-2003 David Gravereaux. +# Copyright (c) 2003-2008 Patrick Thoyts +# Copyright (c) 2017 Ashok P. Nadkarni +#------------------------------------------------------------------------------ + +!ifndef _RULES_VC +_RULES_VC = 1 + +# The following macros define the version of the rules.vc nmake build system +# For modifications that are not backward-compatible, you *must* change +# the major version. +RULES_VERSION_MAJOR = 1 +RULES_VERSION_MINOR = 11 + +# The PROJECT macro must be defined by parent makefile. +!if "$(PROJECT)" == "" +!error *** Error: Macro PROJECT not defined! Please define it before including rules.vc +!endif + +!if "$(PRJ_PACKAGE_TCLNAME)" == "" +PRJ_PACKAGE_TCLNAME = $(PROJECT) +!endif + +# Also special case Tcl and Tk to save some typing later +DOING_TCL = 0 +DOING_TK = 0 +!if "$(PROJECT)" == "tcl" +DOING_TCL = 1 +!elseif "$(PROJECT)" == "tk" +DOING_TK = 1 +!endif + +!ifndef NEED_TK +# Backwards compatibility +!ifdef PROJECT_REQUIRES_TK +NEED_TK = $(PROJECT_REQUIRES_TK) +!else +NEED_TK = 0 +!endif +!endif + +!ifndef NEED_TCL_SOURCE +NEED_TCL_SOURCE = 0 +!endif + +!ifdef NEED_TK_SOURCE +!if $(NEED_TK_SOURCE) +NEED_TK = 1 +!endif +!else +NEED_TK_SOURCE = 0 +!endif + +################################################################ +# Nmake is a pretty weak environment in syntax and capabilities +# so this file is necessarily verbose. It's broken down into +# the following parts. +# +# 0. Sanity check that compiler environment is set up and initialize +# any built-in settings from the parent makefile +# 1. First define the external tools used for compiling, copying etc. +# as this is independent of everything else. +# 2. Figure out our build structure in terms of the directory, whether +# we are building Tcl or an extension, etc. +# 3. Determine the compiler and linker versions +# 4. Build the nmakehlp helper application +# 5. Determine the supported compiler options and features +# 6. Extract Tcl, Tk, and possibly extensions, version numbers from the +# headers +# 7. Parse the OPTS macro value for user-specified build configuration +# 8. Parse the STATS macro value for statistics instrumentation +# 9. Parse the CHECKS macro for additional compilation checks +# 10. Based on this selected configuration, construct the output +# directory and file paths +# 11. Construct the paths where the package is to be installed +# 12. Set up the actual options passed to compiler and linker based +# on the information gathered above. +# 13. Define some standard build targets and implicit rules. These may +# be optionally disabled by the parent makefile. +# 14. (For extensions only.) Compare the configuration of the target +# Tcl and the extensions and warn against discrepancies. +# +# One final note about the macro names used. They are as they are +# for historical reasons. We would like legacy extensions to +# continue to work with this make include file so be wary of +# changing them for consistency or clarity. + +# 0. Sanity check compiler environment + +# Check to see we are configured to build with MSVC (MSDEVDIR, MSVCDIR or +# VCINSTALLDIR) or with the MS Platform SDK (MSSDK or WindowsSDKDir) + +!if !defined(MSDEVDIR) && !defined(MSVCDIR) && !defined(VCINSTALLDIR) && !defined(MSSDK) && !defined(WINDOWSSDKDIR) +MSG = ^ +Visual C++ compiler environment not initialized. +!error $(MSG) +!endif + +# We need to run from the directory the parent makefile is located in. +# nmake does not tell us what makefile was used to invoke it so parent +# makefile has to set the MAKEFILEVC macro or we just make a guess and +# warn if we think that is not the case. +!if "$(MAKEFILEVC)" == "" + +!if exist("$(PROJECT).vc") +MAKEFILEVC = $(PROJECT).vc +!elseif exist("makefile.vc") +MAKEFILEVC = makefile.vc +!endif +!endif # "$(MAKEFILEVC)" == "" + +!if !exist("$(MAKEFILEVC)") +MSG = ^ +You must run nmake from the directory containing the project makefile.^ +If you are doing that and getting this message, set the MAKEFILEVC^ +macro to the name of the project makefile. +!message WARNING: $(MSG) +!endif + + +################################################################ +# 1. Define external programs being used + +#---------------------------------------------------------- +# Set the proper copy method to avoid overwrite questions +# to the user when copying files and selecting the right +# "delete all" method. +#---------------------------------------------------------- + +RMDIR = rmdir /S /Q +CPY = xcopy /i /y >NUL +CPYDIR = xcopy /e /i /y >NUL +COPY = copy /y >NUL +MKDIR = mkdir + +###################################################################### +# 2. Figure out our build environment in terms of what we're building. +# +# (a) Tcl itself +# (b) Tk +# (c) a Tcl extension using libraries/includes from an *installed* Tcl +# (d) a Tcl extension using libraries/includes from Tcl source directory +# +# This last is needed because some extensions still need +# some Tcl interfaces that are not publicly exposed. +# +# The fragment will set the following macros: +# ROOT - root of this module sources +# COMPATDIR - source directory that holds compatibility sources +# DOCDIR - source directory containing documentation files +# GENERICDIR - platform-independent source directory +# WIN_DIR - Windows-specific source directory +# TESTDIR - directory containing test files +# TOOLSDIR - directory containing build tools +# _TCLDIR - root of the Tcl installation OR the Tcl sources. Not set +# when building Tcl itself. +# _INSTALLDIR - native form of the installation path. For Tcl +# this will be the root of the Tcl installation. For extensions +# this will be the lib directory under the root. +# TCLINSTALL - set to 1 if _TCLDIR refers to +# headers and libraries from an installed Tcl, and 0 if built against +# Tcl sources. Not set when building Tcl itself. Yes, not very well +# named. +# _TCL_H - native path to the tcl.h file +# +# If Tk is involved, also sets the following +# _TKDIR - native form Tk installation OR Tk source. Not set if building +# Tk itself. +# TKINSTALL - set 1 if _TKDIR refers to installed Tk and 0 if Tk sources +# _TK_H - native path to the tk.h file + +# Root directory for sources and assumed subdirectories +ROOT = $(MAKEDIR)\.. +# The following paths CANNOT have spaces in them as they appear on the +# left side of implicit rules. +!ifndef COMPATDIR +COMPATDIR = $(ROOT)\compat +!endif +!ifndef DOCDIR +DOCDIR = $(ROOT)\doc +!endif +!ifndef GENERICDIR +GENERICDIR = $(ROOT)\generic +!endif +!ifndef TOOLSDIR +TOOLSDIR = $(ROOT)\tools +!endif +!ifndef TESTDIR +TESTDIR = $(ROOT)\tests +!endif +!ifndef LIBDIR +!if exist("$(ROOT)\library") +LIBDIR = $(ROOT)\library +!else +LIBDIR = $(ROOT)\lib +!endif +!endif +!ifndef DEMODIR +!if exist("$(LIBDIR)\demos") +DEMODIR = $(LIBDIR)\demos +!else +DEMODIR = $(ROOT)\demos +!endif +!endif # ifndef DEMODIR +# Do NOT use WINDIR because it is Windows internal environment +# variable to point to c:\windows! +WIN_DIR = $(ROOT)\win + +!ifndef RCDIR +!if exist("$(WIN_DIR)\rc") +RCDIR = $(WIN_DIR)\rc +!else +RCDIR = $(WIN_DIR) +!endif +!endif +RCDIR = $(RCDIR:/=\) + +# The target directory where the built packages and binaries will be installed. +# INSTALLDIR is the (optional) path specified by the user. +# _INSTALLDIR is INSTALLDIR using the backslash separator syntax +!ifdef INSTALLDIR +### Fix the path separators. +_INSTALLDIR = $(INSTALLDIR:/=\) +!else +### Assume the normal default. +_INSTALLDIR = $(HOMEDRIVE)\Tcl +!endif + +!if $(DOING_TCL) + +# BEGIN Case 2(a) - Building Tcl itself + +# Only need to define _TCL_H +_TCL_H = ..\generic\tcl.h + +# END Case 2(a) - Building Tcl itself + +!elseif $(DOING_TK) + +# BEGIN Case 2(b) - Building Tk + +TCLINSTALL = 0 # Tk always builds against Tcl source, not an installed Tcl +!if "$(TCLDIR)" == "" +!if [echo TCLDIR = \> nmakehlp.out] \ + || [nmakehlp -L generic\tcl.h >> nmakehlp.out] +!error *** Could not locate Tcl source directory. +!endif +!include nmakehlp.out +!endif # TCLDIR == "" + +_TCLDIR = $(TCLDIR:/=\) +_TCL_H = $(_TCLDIR)\generic\tcl.h +!if !exist("$(_TCL_H)") +!error Could not locate tcl.h. Please set the TCLDIR macro to point to the Tcl *source* directory. +!endif + +_TK_H = ..\generic\tk.h + +# END Case 2(b) - Building Tk + +!else + +# BEGIN Case 2(c) or (d) - Building an extension other than Tk + +# If command line has specified Tcl location through TCLDIR, use it +# else default to the INSTALLDIR setting +!if "$(TCLDIR)" != "" + +_TCLDIR = $(TCLDIR:/=\) +!if exist("$(_TCLDIR)\include\tcl.h") # Case 2(c) with TCLDIR defined +TCLINSTALL = 1 +_TCL_H = $(_TCLDIR)\include\tcl.h +!elseif exist("$(_TCLDIR)\generic\tcl.h") # Case 2(d) with TCLDIR defined +TCLINSTALL = 0 +_TCL_H = $(_TCLDIR)\generic\tcl.h +!endif + +!else # # Case 2(c) for extensions with TCLDIR undefined + +# Need to locate Tcl depending on whether it needs Tcl source or not. +# If we don't, check the INSTALLDIR for an installed Tcl first + +!if exist("$(_INSTALLDIR)\include\tcl.h") && !$(NEED_TCL_SOURCE) + +TCLINSTALL = 1 +TCLDIR = $(_INSTALLDIR)\.. +# NOTE: we will be resetting _INSTALLDIR to _INSTALLDIR/lib for extensions +# later so the \.. accounts for the /lib +_TCLDIR = $(_INSTALLDIR)\.. +_TCL_H = $(_TCLDIR)\include\tcl.h + +!else # exist(...) && !$(NEED_TCL_SOURCE) + +!if [echo _TCLDIR = \> nmakehlp.out] \ + || [nmakehlp -L generic\tcl.h >> nmakehlp.out] +!error *** Could not locate Tcl source directory. +!endif +!include nmakehlp.out +TCLINSTALL = 0 +TCLDIR = $(_TCLDIR) +_TCL_H = $(_TCLDIR)\generic\tcl.h + +!endif # exist(...) && !$(NEED_TCL_SOURCE) + +!endif # TCLDIR + +!ifndef _TCL_H +MSG =^ +Failed to find tcl.h. The TCLDIR macro is set incorrectly or is not set and default path does not contain tcl.h. +!error $(MSG) +!endif + +# Now do the same to locate Tk headers and libs if project requires Tk +!if $(NEED_TK) + +!if "$(TKDIR)" != "" + +_TKDIR = $(TKDIR:/=\) +!if exist("$(_TKDIR)\include\tk.h") +TKINSTALL = 1 +_TK_H = $(_TKDIR)\include\tk.h +!elseif exist("$(_TKDIR)\generic\tk.h") +TKINSTALL = 0 +_TK_H = $(_TKDIR)\generic\tk.h +!endif + +!else # TKDIR not defined + +# Need to locate Tcl depending on whether it needs Tcl source or not. +# If we don't, check the INSTALLDIR for an installed Tcl first + +!if exist("$(_INSTALLDIR)\include\tk.h") && !$(NEED_TK_SOURCE) + +TKINSTALL = 1 +# NOTE: we will be resetting _INSTALLDIR to _INSTALLDIR/lib for extensions +# later so the \.. accounts for the /lib +_TKDIR = $(_INSTALLDIR)\.. +_TK_H = $(_TKDIR)\include\tk.h +TKDIR = $(_TKDIR) + +!else # exist("$(_INSTALLDIR)\include\tk.h") && !$(NEED_TK_SOURCE) + +!if [echo _TKDIR = \> nmakehlp.out] \ + || [nmakehlp -L generic\tk.h >> nmakehlp.out] +!error *** Could not locate Tk source directory. +!endif +!include nmakehlp.out +TKINSTALL = 0 +TKDIR = $(_TKDIR) +_TK_H = $(_TKDIR)\generic\tk.h + +!endif # exist("$(_INSTALLDIR)\include\tk.h") && !$(NEED_TK_SOURCE) + +!endif # TKDIR + +!ifndef _TK_H +MSG =^ +Failed to find tk.h. The TKDIR macro is set incorrectly or is not set and default path does not contain tk.h. +!error $(MSG) +!endif + +!endif # NEED_TK + +!if $(NEED_TCL_SOURCE) && $(TCLINSTALL) +MSG = ^ +*** Warning: This extension requires the source distribution of Tcl.^ +*** Please set the TCLDIR macro to point to the Tcl sources. +!error $(MSG) +!endif + +!if $(NEED_TK_SOURCE) +!if $(TKINSTALL) +MSG = ^ +*** Warning: This extension requires the source distribution of Tk.^ +*** Please set the TKDIR macro to point to the Tk sources. +!error $(MSG) +!endif +!endif + + +# If INSTALLDIR set to Tcl installation root dir then reset to the +# lib dir for installing extensions +!if exist("$(_INSTALLDIR)\include\tcl.h") +_INSTALLDIR=$(_INSTALLDIR)\lib +!endif + +# END Case 2(c) or (d) - Building an extension +!endif # if $(DOING_TCL) + +################################################################ +# 3. Determine compiler version and architecture +# In this section, we figure out the compiler version and the +# architecture for which we are building. This sets the +# following macros: +# VCVERSION - the internal compiler version as 1200, 1400, 1910 etc. +# This is also printed by the compiler in dotted form 19.10 etc. +# VCVER - the "marketing version", for example Visual C++ 6 for internal +# compiler version 1200. This is kept only for legacy reasons as it +# does not make sense for recent Microsoft compilers. Only used for +# output directory names. +# ARCH - set to IX86, ARM64 or AMD64 depending on 32- or 64-bit target +# NATIVE_ARCH - set to IX86, ARM64 or AMD64 for the host machine +# MACHINE - same as $(ARCH) - legacy +# _VC_MANIFEST_EMBED_{DLL,EXE} - commands for embedding a manifest if needed + +cc32 = $(CC) # built-in default. +link32 = link +lib32 = lib +rc32 = $(RC) # built-in default. + +#---------------------------------------------------------------- +# Figure out the compiler architecture and version by writing +# the C macros to a file, preprocessing them with the C +# preprocessor and reading back the created file + +_HASH=^# +_VC_MANIFEST_EMBED_EXE= +_VC_MANIFEST_EMBED_DLL= +VCVER=0 +!if ![echo VCVERSION=_MSC_VER > vercl.x] \ + && ![echo $(_HASH)if defined(_M_IX86) >> vercl.x] \ + && ![echo ARCH=IX86 >> vercl.x] \ + && ![echo $(_HASH)elif defined(_M_AMD64) >> vercl.x] \ + && ![echo ARCH=AMD64 >> vercl.x] \ + && ![echo $(_HASH)elif defined(_M_ARM64) >> vercl.x] \ + && ![echo ARCH=ARM64 >> vercl.x] \ + && ![echo $(_HASH)endif >> vercl.x] \ + && ![$(cc32) -nologo -TC -P vercl.x 2>NUL] +!include vercl.i +!if $(VCVERSION) < 1900 +!if ![echo VCVER= ^\> vercl.vc] \ + && ![set /a $(VCVERSION) / 100 - 6 >> vercl.vc] +!include vercl.vc +!endif +!else +# The simple calculation above does not apply to new Visual Studio releases +# Keep the compiler version in its native form. +VCVER = $(VCVERSION) +!endif +!endif + +!if ![del 2>NUL /q/f vercl.x vercl.i vercl.vc] +!endif + +#---------------------------------------------------------------- +# The MACHINE macro is used by legacy makefiles so set it as well +!ifdef MACHINE +!if "$(MACHINE)" == "x86" +!undef MACHINE +MACHINE = IX86 +!elseif "$(MACHINE)" == "arm64" +!undef MACHINE +MACHINE = ARM64 +!elseif "$(MACHINE)" == "x64" +!undef MACHINE +MACHINE = AMD64 +!endif +!if "$(MACHINE)" != "$(ARCH)" +!error Specified MACHINE macro $(MACHINE) does not match detected target architecture $(ARCH). +!endif +!else +MACHINE=$(ARCH) +!endif + +#--------------------------------------------------------------- +# The PLATFORM_IDENTIFY macro matches the values returned by +# the Tcl platform::identify command +!if "$(MACHINE)" == "AMD64" +PLATFORM_IDENTIFY = win32-x86_64 +!elseif "$(MACHINE)" == "ARM64" +PLATFORM_IDENTIFY = win32-arm +!else +PLATFORM_IDENTIFY = win32-ix86 +!endif + +# The MULTIPLATFORM macro controls whether binary extensions are installed +# in platform-specific directories. Intended to be set/used by extensions. +!ifndef MULTIPLATFORM_INSTALL +MULTIPLATFORM_INSTALL = 0 +!endif + +#------------------------------------------------------------ +# Figure out the *host* architecture by reading the registry + +!if ![reg query HKLM\Hardware\Description\System\CentralProcessor\0 /v Identifier | findstr /i x86] +NATIVE_ARCH=IX86 +!elseif ![reg query HKLM\Hardware\Description\System\CentralProcessor\0 /v Identifier | findstr /i ARM | findstr /i 64-bit] +NATIVE_ARCH=ARM64 +!else +NATIVE_ARCH=AMD64 +!endif + +# Since MSVC8 we must deal with manifest resources. +!if $(VCVERSION) >= 1400 +_VC_MANIFEST_EMBED_EXE=if exist $@.manifest mt -nologo -manifest $@.manifest -outputresource:$@;1 +_VC_MANIFEST_EMBED_DLL=if exist $@.manifest mt -nologo -manifest $@.manifest -outputresource:$@;2 +!endif + +################################################################ +# 4. Build the nmakehlp program +# This is a helper app we need to overcome nmake's limiting +# environment. We will call out to it to get various bits of +# information about supported compiler options etc. +# +# Tcl itself will always use the nmakehlp.c program which is +# in its own source. It will be kept updated there. +# +# Extensions built against an installed Tcl will use the installed +# copy of Tcl's nmakehlp.c if there is one and their own version +# otherwise. In the latter case, they would also be using their own +# rules.vc. Note that older versions of Tcl do not install nmakehlp.c +# or rules.vc. +# +# Extensions built against Tcl sources will use the one from the Tcl source. +# +# When building an extension using a sufficiently new version of Tcl, +# rules-ext.vc will define NMAKEHLPC appropriately to point to the +# copy of nmakehlp.c to be used. + +!ifndef NMAKEHLPC +# Default to the one in the current directory (the extension's own nmakehlp.c) +NMAKEHLPC = nmakehlp.c + +!if !$(DOING_TCL) +!if $(TCLINSTALL) +!if exist("$(_TCLDIR)\lib\nmake\nmakehlp.c") +NMAKEHLPC = $(_TCLDIR)\lib\nmake\nmakehlp.c +!endif +!else # !$(TCLINSTALL) +!if exist("$(_TCLDIR)\win\nmakehlp.c") +NMAKEHLPC = $(_TCLDIR)\win\nmakehlp.c +!endif +!endif # $(TCLINSTALL) +!endif # !$(DOING_TCL) + +!endif # NMAKEHLPC + +# We always build nmakehlp even if it exists since we do not know +# what source it was built from. +!if "$(MACHINE)" == "IX86" || "$(MACHINE)" == "$(NATIVE_ARCH)" +!if [$(cc32) -nologo "$(NMAKEHLPC)" -link -subsystem:console > nul] +!endif +!else +!if [copy $(NMAKEHLPC:nmakehlp.c=x86_64-w64-mingw32-nmakehlp.exe) nmakehlp.exe >NUL] +!endif +!endif + +################################################################ +# 5. Test for compiler features +# Visual C++ compiler options have changed over the years. Check +# which options are supported by the compiler in use. +# +# The following macros are set: +# OPTIMIZATIONS - the compiler flags to be used for optimized builds +# DEBUGFLAGS - the compiler flags to be used for debug builds +# LINKERFLAGS - Flags passed to the linker +# +# Note that these are the compiler settings *available*, not those +# that will be *used*. The latter depends on the OPTS macro settings +# which we have not yet parsed. +# +# Also note that some of the flags in OPTIMIZATIONS are not really +# related to optimization. They are placed there only for legacy reasons +# as some extensions expect them to be included in that macro. + +# -Op improves float consistency. Note only needed for older compilers +# Newer compilers do not need or support this option. +!if [nmakehlp -c -Op] +FPOPTS = -Op +!endif + +# Strict floating point semantics - present in newer compilers in lieu of -Op +!if [nmakehlp -c -fp:strict] +FPOPTS = $(FPOPTS) -fp:strict +!endif + +!if "$(MACHINE)" == "IX86" +### test for pentium errata +!if [nmakehlp -c -QI0f] +!message *** Compiler has 'Pentium 0x0f fix' +FPOPTS = $(FPOPTS) -QI0f +!else +!message *** Compiler does not have 'Pentium 0x0f fix' +!endif +!endif + +### test for optimizations +# /O2 optimization includes /Og /Oi /Ot /Oy /Ob2 /Gs /GF /Gy as per +# documentation. Note we do NOT want /Gs as that inserts a _chkstk +# stack probe at *every* function entry, not just those with more than +# a page of stack allocation resulting in a performance hit. However, +# /O2 documentation is misleading as its stack probes are simply the +# default page size locals allocation probes and not what is implied +# by an explicit /Gs option. + +OPTIMIZATIONS = $(FPOPTS) + +!if [nmakehlp -c -O2] +OPTIMIZING = 1 +OPTIMIZATIONS = $(OPTIMIZATIONS) -O2 +!else +# Legacy, really. All modern compilers support this +!message *** Compiler does not have 'Optimizations' +OPTIMIZING = 0 +!endif + +# Checks for buffer overflows in local arrays +!if [nmakehlp -c -GS] +OPTIMIZATIONS = $(OPTIMIZATIONS) -GS +!endif + +# Link time optimization. Note that this option (potentially) makes +# generated libraries only usable by the specific VC++ version that +# created it. Requires /LTCG linker option +!if [nmakehlp -c -GL] +OPTIMIZATIONS = $(OPTIMIZATIONS) -GL +CC_GL_OPT_ENABLED = 1 +!else +# In newer compilers -GL and -YX are incompatible. +!if [nmakehlp -c -YX] +OPTIMIZATIONS = $(OPTIMIZATIONS) -YX +!endif +!endif # [nmakehlp -c -GL] + +DEBUGFLAGS = $(FPOPTS) + +# Run time error checks. Not available or valid in a release, non-debug build +# RTC is for modern compilers, -GZ is legacy +!if [nmakehlp -c -RTC1] +DEBUGFLAGS = $(DEBUGFLAGS) -RTC1 +!elseif [nmakehlp -c -GZ] +DEBUGFLAGS = $(DEBUGFLAGS) -GZ +!endif + +#---------------------------------------------------------------- +# Linker flags + +# LINKER_TESTFLAGS are for internal use when we call nmakehlp to test +# if the linker supports a specific option. Without these flags link will +# return "LNK1561: entry point must be defined" error compiling from VS-IDE: +# They are not passed through to the actual application / extension +# link rules. +!ifndef LINKER_TESTFLAGS +LINKER_TESTFLAGS = /DLL /NOENTRY /OUT:nmakehlp.out +!endif + +LINKERFLAGS = + +# If compiler has enabled link time optimization, linker must too with -ltcg +!ifdef CC_GL_OPT_ENABLED +!if [nmakehlp -l -ltcg $(LINKER_TESTFLAGS)] +LINKERFLAGS = $(LINKERFLAGS) -ltcg +!endif +!endif + + +################################################################ +# 6. Extract various version numbers from headers +# For Tcl and Tk, version numbers are extracted from tcl.h and tk.h +# respectively. For extensions, versions are extracted from the +# configure.in or configure.ac from the TEA configuration if it +# exists, and unset otherwise. +# Sets the following macros: +# TCL_MAJOR_VERSION +# TCL_MINOR_VERSION +# TCL_RELEASE_SERIAL +# TCL_PATCH_LEVEL +# TCL_PATCH_LETTER +# TCL_VERSION +# TK_MAJOR_VERSION +# TK_MINOR_VERSION +# TK_RELEASE_SERIAL +# TK_PATCH_LEVEL +# TK_PATCH_LETTER +# TK_VERSION +# DOTVERSION - set as (for example) 2.5 +# VERSION - set as (for example 25) +#-------------------------------------------------------------- + +!if [echo REM = This file is generated from rules.vc > versions.vc] +!endif +!if [echo TCL_MAJOR_VERSION = \>> versions.vc] \ + && [nmakehlp -V "$(_TCL_H)" "define TCL_MAJOR_VERSION" >> versions.vc] +!endif +!if [echo TCL_MINOR_VERSION = \>> versions.vc] \ + && [nmakehlp -V "$(_TCL_H)" TCL_MINOR_VERSION >> versions.vc] +!endif +!if [echo TCL_RELEASE_SERIAL = \>> versions.vc] \ + && [nmakehlp -V "$(_TCL_H)" TCL_RELEASE_SERIAL >> versions.vc] +!endif +!if [echo TCL_PATCH_LEVEL = \>> versions.vc] \ + && [nmakehlp -V "$(_TCL_H)" TCL_PATCH_LEVEL >> versions.vc] +!endif + +!if defined(_TK_H) +!if [echo TK_MAJOR_VERSION = \>> versions.vc] \ + && [nmakehlp -V $(_TK_H) "define TK_MAJOR_VERSION" >> versions.vc] +!endif +!if [echo TK_MINOR_VERSION = \>> versions.vc] \ + && [nmakehlp -V $(_TK_H) TK_MINOR_VERSION >> versions.vc] +!endif +!if [echo TK_RELEASE_SERIAL = \>> versions.vc] \ + && [nmakehlp -V "$(_TK_H)" TK_RELEASE_SERIAL >> versions.vc] +!endif +!if [echo TK_PATCH_LEVEL = \>> versions.vc] \ + && [nmakehlp -V $(_TK_H) TK_PATCH_LEVEL >> versions.vc] +!endif +!endif # _TK_H + +!include versions.vc + +TCL_VERSION = $(TCL_MAJOR_VERSION)$(TCL_MINOR_VERSION) +TCL_DOTVERSION = $(TCL_MAJOR_VERSION).$(TCL_MINOR_VERSION) +!if [nmakehlp -f $(TCL_PATCH_LEVEL) "a"] +TCL_PATCH_LETTER = a +!elseif [nmakehlp -f $(TCL_PATCH_LEVEL) "b"] +TCL_PATCH_LETTER = b +!else +TCL_PATCH_LETTER = . +!endif + +!if defined(_TK_H) + +TK_VERSION = $(TK_MAJOR_VERSION)$(TK_MINOR_VERSION) +TK_DOTVERSION = $(TK_MAJOR_VERSION).$(TK_MINOR_VERSION) +!if [nmakehlp -f $(TK_PATCH_LEVEL) "a"] +TK_PATCH_LETTER = a +!elseif [nmakehlp -f $(TK_PATCH_LEVEL) "b"] +TK_PATCH_LETTER = b +!else +TK_PATCH_LETTER = . +!endif + +!endif + +# Set DOTVERSION and VERSION +!if $(DOING_TCL) + +DOTVERSION = $(TCL_MAJOR_VERSION).$(TCL_MINOR_VERSION) +VERSION = $(TCL_VERSION) + +!elseif $(DOING_TK) + +DOTVERSION = $(TK_DOTVERSION) +VERSION = $(TK_VERSION) + +!else # Doing a non-Tk extension + +# If parent makefile has not defined DOTVERSION, try to get it from TEA +# first from a configure.in file, and then from configure.ac +!ifndef DOTVERSION +!if [echo DOTVERSION = \> versions.vc] \ + || [nmakehlp -V $(ROOT)\configure.in ^[$(PROJECT)^] >> versions.vc] +!if [echo DOTVERSION = \> versions.vc] \ + || [nmakehlp -V $(ROOT)\configure.ac ^[$(PROJECT)^] >> versions.vc] +!error *** Could not figure out extension version. Please define DOTVERSION in parent makefile before including rules.vc. +!endif +!endif +!include versions.vc +!endif # DOTVERSION +VERSION = $(DOTVERSION:.=) + +!endif # $(DOING_TCL) ... etc. + +# Windows RC files have 3 version components. Ensure this irrespective +# of how many components the package has specified. Basically, ensure +# minimum 4 components by appending 4 0's and then pick out the first 4. +# Also take care of the fact that DOTVERSION may have "a" or "b" instead +# of "." separating the version components. +DOTSEPARATED=$(DOTVERSION:a=.) +DOTSEPARATED=$(DOTSEPARATED:b=.) +!if [echo RCCOMMAVERSION = \> versions.vc] \ + || [for /f "tokens=1,2,3,4,5* delims=." %a in ("$(DOTSEPARATED).0.0.0.0") do echo %a,%b,%c,%d >> versions.vc] +!error *** Could not generate RCCOMMAVERSION *** +!endif +!include versions.vc + +######################################################################## +# 7. Parse the OPTS macro to work out the requested build configuration. +# Based on this, we will construct the actual switches to be passed to the +# compiler and linker using the macros defined in the previous section. +# The following macros are defined by this section based on OPTS +# STATIC_BUILD - 0 -> Tcl is to be built as a shared library +# 1 -> build as a static library and shell +# TCL_THREADS - legacy but always 1 on Windows since winsock requires it. +# DEBUG - 1 -> debug build, 0 -> release builds +# SYMBOLS - 1 -> generate PDB's, 0 -> no PDB's +# PROFILE - 1 -> generate profiling info, 0 -> no profiling +# PGO - 1 -> profile based optimization, 0 -> no +# MSVCRT - 1 -> link to dynamic C runtime even when building static Tcl build +# 0 -> link to static C runtime for static Tcl build. +# Does not impact shared Tcl builds (STATIC_BUILD == 0) +# Default: 1 for Tcl 8.7 and up, 0 otherwise. +# TCL_USE_STATIC_PACKAGES - 1 -> statically link the registry and dde extensions +# in the Tcl and Wish shell. 0 -> keep them as shared libraries. Does +# not impact shared Tcl builds. Implied by STATIC_BUILD since Tcl 8.7. +# USE_THREAD_ALLOC - 1 -> Use a shared global free pool for allocation. +# 0 -> Use the non-thread allocator. +# UNCHECKED - 1 -> when doing a debug build with symbols, use the release +# C runtime, 0 -> use the debug C runtime. +# USE_STUBS - 1 -> compile to use stubs interfaces, 0 -> direct linking +# CONFIG_CHECK - 1 -> check current build configuration against Tcl +# configuration (ignored for Tcl itself) +# _USE_64BIT_TIME_T - forces a build using 64-bit time_t for 32-bit build +# (CRT library should support this, not needed for Tcl 9.x) +# Further, LINKERFLAGS are modified based on above. + +# Default values for all the above +STATIC_BUILD = 0 +TCL_THREADS = 1 +DEBUG = 0 +SYMBOLS = 0 +PROFILE = 0 +PGO = 0 +MSVCRT = 1 +TCL_USE_STATIC_PACKAGES = 0 +USE_THREAD_ALLOC = 1 +UNCHECKED = 0 +CONFIG_CHECK = 1 +!if $(DOING_TCL) +USE_STUBS = 0 +!else +USE_STUBS = 1 +!endif + +# If OPTS is not empty AND does not contain "none" which turns off all OPTS +# set the above macros based on OPTS content +!if "$(OPTS)" != "" && ![nmakehlp -f "$(OPTS)" "none"] + +# OPTS are specified, parse them + +!if [nmakehlp -f $(OPTS) "static"] +!message *** Doing static +STATIC_BUILD = 1 +!endif + +!if [nmakehlp -f $(OPTS) "nostubs"] +!message *** Not using stubs +USE_STUBS = 0 +!endif + +!if [nmakehlp -f $(OPTS) "nomsvcrt"] +!message *** Doing nomsvcrt +MSVCRT = 0 +!else +!if [nmakehlp -f $(OPTS) "msvcrt"] +!message *** Doing msvcrt +!else +!if $(TCL_MAJOR_VERSION) == 8 && $(TCL_MINOR_VERSION) < 7 && $(STATIC_BUILD) +MSVCRT = 0 +!endif +!endif +!endif # [nmakehlp -f $(OPTS) "nomsvcrt"] + +!if [nmakehlp -f $(OPTS) "staticpkg"] && $(STATIC_BUILD) +!message *** Doing staticpkg +TCL_USE_STATIC_PACKAGES = 1 +!endif + +!if [nmakehlp -f $(OPTS) "nothreads"] +!message *** Compile explicitly for non-threaded tcl +TCL_THREADS = 0 +USE_THREAD_ALLOC= 0 +!endif + +!if [nmakehlp -f $(OPTS) "tcl8"] +!message *** Build for Tcl8 +TCL_BUILD_FOR = 8 +!endif + +!if $(TCL_MAJOR_VERSION) == 8 +!if [nmakehlp -f $(OPTS) "time64bit"] +!message *** Force 64-bit time_t +_USE_64BIT_TIME_T = 1 +!endif +!endif + +# Yes, it's weird that the "symbols" option controls DEBUG and +# the "pdbs" option controls SYMBOLS. That's historical. +!if [nmakehlp -f $(OPTS) "symbols"] +!message *** Doing symbols +DEBUG = 1 +!else +DEBUG = 0 +!endif + +!if [nmakehlp -f $(OPTS) "pdbs"] +!message *** Doing pdbs +SYMBOLS = 1 +!else +SYMBOLS = 0 +!endif + +!if [nmakehlp -f $(OPTS) "profile"] +!message *** Doing profile +PROFILE = 1 +!else +PROFILE = 0 +!endif + +!if [nmakehlp -f $(OPTS) "pgi"] +!message *** Doing profile guided optimization instrumentation +PGO = 1 +!elseif [nmakehlp -f $(OPTS) "pgo"] +!message *** Doing profile guided optimization +PGO = 2 +!else +PGO = 0 +!endif + +!if [nmakehlp -f $(OPTS) "loimpact"] +!message *** Warning: ignoring option "loimpact" - deprecated on modern Windows. +!endif + +# TBD - should get rid of this option +!if [nmakehlp -f $(OPTS) "thrdalloc"] +!message *** Doing thrdalloc +USE_THREAD_ALLOC = 1 +!endif + +!if [nmakehlp -f $(OPTS) "tclalloc"] +USE_THREAD_ALLOC = 0 +!endif + +!if [nmakehlp -f $(OPTS) "unchecked"] +!message *** Doing unchecked +UNCHECKED = 1 +!else +UNCHECKED = 0 +!endif + +!if [nmakehlp -f $(OPTS) "noconfigcheck"] +CONFIG_CHECK = 1 +!else +CONFIG_CHECK = 0 +!endif + +!endif # "$(OPTS)" != "" && ... parsing of OPTS + +# Set linker flags based on above + +!if $(PGO) > 1 +!if [nmakehlp -l -ltcg:pgoptimize $(LINKER_TESTFLAGS)] +LINKERFLAGS = $(LINKERFLAGS:-ltcg=) -ltcg:pgoptimize +!else +MSG=^ +This compiler does not support profile guided optimization. +!error $(MSG) +!endif +!elseif $(PGO) > 0 +!if [nmakehlp -l -ltcg:pginstrument $(LINKER_TESTFLAGS)] +LINKERFLAGS = $(LINKERFLAGS:-ltcg=) -ltcg:pginstrument +!else +MSG=^ +This compiler does not support profile guided optimization. +!error $(MSG) +!endif +!endif + +################################################################ +# 8. Parse the STATS macro to configure code instrumentation +# The following macros are set by this section: +# TCL_MEM_DEBUG - 1 -> enables memory allocation instrumentation +# 0 -> disables +# TCL_COMPILE_DEBUG - 1 -> enables byte compiler logging +# 0 -> disables + +# Default both are off +TCL_MEM_DEBUG = 0 +TCL_COMPILE_DEBUG = 0 + +!if "$(STATS)" != "" && ![nmakehlp -f "$(STATS)" "none"] + +!if [nmakehlp -f $(STATS) "memdbg"] +!message *** Doing memdbg +TCL_MEM_DEBUG = 1 +!else +TCL_MEM_DEBUG = 0 +!endif + +!if [nmakehlp -f $(STATS) "compdbg"] +!message *** Doing compdbg +TCL_COMPILE_DEBUG = 1 +!else +TCL_COMPILE_DEBUG = 0 +!endif + +!endif + +#################################################################### +# 9. Parse the CHECKS macro to configure additional compiler checks +# The following macros are set by this section: +# WARNINGS - compiler switches that control the warnings level +# TCL_NO_DEPRECATED - 1 -> disable support for deprecated functions +# 0 -> enable deprecated functions + +# Defaults - Permit deprecated functions and warning level 3 +TCL_NO_DEPRECATED = 0 +WARNINGS = -W3 + +!if "$(CHECKS)" != "" && ![nmakehlp -f "$(CHECKS)" "none"] + +!if [nmakehlp -f $(CHECKS) "nodep"] +!message *** Doing nodep check +TCL_NO_DEPRECATED = 1 +!endif + +!if [nmakehlp -f $(CHECKS) "fullwarn"] +!message *** Doing full warnings check +WARNINGS = -W4 +!if [nmakehlp -l -warn:3 $(LINKER_TESTFLAGS)] +LINKERFLAGS = $(LINKERFLAGS) -warn:3 +!endif +!endif + +!if [nmakehlp -f $(CHECKS) "64bit"] && [nmakehlp -c -Wp64] +!message *** Doing 64bit portability warnings +WARNINGS = $(WARNINGS) -Wp64 +!endif + +!endif + + +################################################################ +# 10. Construct output directory and file paths +# Figure-out how to name our intermediate and output directories. +# In order to avoid inadvertent mixing of object files built using +# different compilers, build configurations etc., +# +# Naming convention (suffixes): +# t = full thread support. (Not used for Tcl >= 8.7) +# s = static library (as opposed to an import library) +# g = linked to the debug enabled C run-time. +# x = special static build when it links to the dynamic C run-time. +# +# The following macros are set in this section: +# SUFX - the suffix to use for binaries based on above naming convention +# BUILDDIRTOP - the toplevel default output directory +# is of the form {Release,Debug}[_AMD64][_COMPILERVERSION] +# TMP_DIR - directory where object files are created +# OUT_DIR - directory where output executables are created +# Both TMP_DIR and OUT_DIR are defaulted only if not defined by the +# parent makefile (or command line). The default values are +# based on BUILDDIRTOP. +# STUBPREFIX - name of the stubs library for this project +# PRJIMPLIB - output path of the generated project import library +# PRJLIBNAME - name of generated project library +# PRJLIB - output path of generated project library +# PRJSTUBLIBNAME - name of the generated project stubs library +# PRJSTUBLIB - output path of the generated project stubs library +# RESFILE - output resource file (only if not static build) + +SUFX = tsgx + +!if $(DEBUG) +BUILDDIRTOP = Debug +!else +BUILDDIRTOP = Release +!endif + +!if "$(MACHINE)" != "IX86" +BUILDDIRTOP =$(BUILDDIRTOP)_$(MACHINE) +!endif +!if $(VCVER) > 6 +BUILDDIRTOP =$(BUILDDIRTOP)_VC$(VCVER) +!endif + +!if !$(DEBUG) || $(TCL_VERSION) > 86 || $(DEBUG) && $(UNCHECKED) +SUFX = $(SUFX:g=) +!endif + +TMP_DIRFULL = .\$(BUILDDIRTOP)\$(PROJECT)_ThreadedDynamicStaticX + +!if !$(STATIC_BUILD) +TMP_DIRFULL = $(TMP_DIRFULL:Static=) +SUFX = $(SUFX:s=) +EXT = dll +TMP_DIRFULL = $(TMP_DIRFULL:X=) +SUFX = $(SUFX:x=) +!else +TMP_DIRFULL = $(TMP_DIRFULL:Dynamic=) +EXT = lib +!if $(MSVCRT) && $(TCL_VERSION) > 86 || !$(MSVCRT) && $(TCL_VERSION) < 87 +TMP_DIRFULL = $(TMP_DIRFULL:X=) +SUFX = $(SUFX:x=) +!endif +!endif + +!if !$(TCL_THREADS) || $(TCL_VERSION) > 86 +TMP_DIRFULL = $(TMP_DIRFULL:Threaded=) +SUFX = $(SUFX:t=) +!endif + +!ifndef TMP_DIR +TMP_DIR = $(TMP_DIRFULL) +!ifndef OUT_DIR +OUT_DIR = .\$(BUILDDIRTOP) +!endif +!else +!ifndef OUT_DIR +OUT_DIR = $(TMP_DIR) +!endif +!endif + +# Relative paths -> absolute +!if [echo OUT_DIR = \> nmakehlp.out] \ + || [nmakehlp -Q "$(OUT_DIR)" >> nmakehlp.out] +!error *** Could not fully qualify path OUT_DIR=$(OUT_DIR) +!endif +!if [echo TMP_DIR = \>> nmakehlp.out] \ + || [nmakehlp -Q "$(TMP_DIR)" >> nmakehlp.out] +!error *** Could not fully qualify path TMP_DIR=$(TMP_DIR) +!endif +!include nmakehlp.out + +# The name of the stubs library for the project being built +STUBPREFIX = $(PROJECT)stub + +# +# Set up paths to various Tcl executables and libraries needed by extensions +# + +# TIP 430. Unused for 8.6 but no harm defining it to allow a common rules.vc +TCLSCRIPTZIPNAME = libtcl$(TCL_MAJOR_VERSION).$(TCL_MINOR_VERSION)$(TCL_PATCH_LETTER)$(TCL_RELEASE_SERIAL).zip +TKSCRIPTZIPNAME = libtk$(TK_MAJOR_VERSION).$(TK_MINOR_VERSION)$(TK_PATCH_LETTER)$(TK_RELEASE_SERIAL).zip + +!if $(DOING_TCL) +TCLSHNAME = $(PROJECT)sh$(VERSION)$(SUFX).exe +TCLSH = $(OUT_DIR)\$(TCLSHNAME) +TCLIMPLIB = $(OUT_DIR)\$(PROJECT)$(VERSION)$(SUFX).lib +TCLLIBNAME = $(PROJECT)$(VERSION)$(SUFX).$(EXT) +TCLLIB = $(OUT_DIR)\$(TCLLIBNAME) +TCLSCRIPTZIP = $(OUT_DIR)\$(TCLSCRIPTZIPNAME) + +!if $(TCL_MAJOR_VERSION) == 8 +TCLSTUBLIBNAME = $(STUBPREFIX)$(VERSION).lib +!else +TCLSTUBLIBNAME = $(STUBPREFIX).lib +!endif +TCLSTUBLIB = $(OUT_DIR)\$(TCLSTUBLIBNAME) +TCL_INCLUDES = -I"$(WIN_DIR)" -I"$(GENERICDIR)" + +!else # !$(DOING_TCL) + +!if $(TCLINSTALL) # Building against an installed Tcl + +# When building extensions, we need to locate tclsh. Depending on version +# of Tcl we are building against, this may or may not have a "t" suffix. +# Try various possibilities in turn. +TCLSH = $(_TCLDIR)\bin\tclsh$(TCL_VERSION)$(SUFX:t=).exe +!if !exist("$(TCLSH)") +TCLSH = $(_TCLDIR)\bin\tclsh$(TCL_VERSION)t$(SUFX:t=).exe +!endif + +!if $(TCL_MAJOR_VERSION) == 8 +TCLSTUBLIB = $(_TCLDIR)\lib\tclstub$(TCL_VERSION).lib +!else +TCLSTUBLIB = $(_TCLDIR)\lib\tclstub.lib +!endif +TCLIMPLIB = $(_TCLDIR)\lib\tcl$(TCL_VERSION)$(SUFX:t=).lib +# When building extensions, may be linking against Tcl that does not add +# "t" suffix (e.g. 8.5 or 8.7). If lib not found check for that possibility. +!if !exist("$(TCLIMPLIB)") +TCLIMPLIB = $(_TCLDIR)\lib\tcl$(TCL_VERSION)t$(SUFX:t=).lib +!endif +TCL_LIBRARY = $(_TCLDIR)\lib +TCLREGLIB = $(_TCLDIR)\lib\tclreg13$(SUFX:t=).lib +TCLDDELIB = $(_TCLDIR)\lib\tcldde14$(SUFX:t=).lib +TCLSCRIPTZIP = $(_TCLDIR)\lib\$(TCLSCRIPTZIPNAME) +TCLTOOLSDIR = \must\have\tcl\sources\to\build\this\target +TCL_INCLUDES = -I"$(_TCLDIR)\include" + +!else # Building against Tcl sources + +TCLSH = $(_TCLDIR)\win\$(BUILDDIRTOP)\tclsh$(TCL_VERSION)$(SUFX:t=).exe +!if !exist($(TCLSH)) +TCLSH = $(_TCLDIR)\win\$(BUILDDIRTOP)\tclsh$(TCL_VERSION)t$(SUFX:t=).exe +!endif +!if $(TCL_MAJOR_VERSION) == 8 +TCLSTUBLIB = $(_TCLDIR)\win\$(BUILDDIRTOP)\tclstub$(TCL_VERSION).lib +!else +TCLSTUBLIB = $(_TCLDIR)\win\$(BUILDDIRTOP)\tclstub.lib +!endif +TCLIMPLIB = $(_TCLDIR)\win\$(BUILDDIRTOP)\tcl$(TCL_VERSION)$(SUFX:t=).lib +# When building extensions, may be linking against Tcl that does not add +# "t" suffix (e.g. 8.5 or 8.7). If lib not found check for that possibility. +!if !exist("$(TCLIMPLIB)") +TCLIMPLIB = $(_TCLDIR)\win\$(BUILDDIRTOP)\tcl$(TCL_VERSION)t$(SUFX:t=).lib +!endif +TCL_LIBRARY = $(_TCLDIR)\library +TCLREGLIB = $(_TCLDIR)\win\$(BUILDDIRTOP)\tclreg13$(SUFX:t=).lib +TCLDDELIB = $(_TCLDIR)\win\$(BUILDDIRTOP)\tcldde14$(SUFX:t=).lib +TCLSCRIPTZIP = $(_TCLDIR)\win\$(BUILDDIRTOP)\$(TCLSCRIPTZIPNAME) +TCLTOOLSDIR = $(_TCLDIR)\tools +TCL_INCLUDES = -I"$(_TCLDIR)\generic" -I"$(_TCLDIR)\win" + +!endif # TCLINSTALL + +!if !$(STATIC_BUILD) && "$(TCL_BUILD_FOR)" == "8" +tcllibs = "$(TCLSTUBLIB)" +!else +tcllibs = "$(TCLSTUBLIB)" "$(TCLIMPLIB)" +!endif + +!endif # $(DOING_TCL) + +# We need a tclsh that will run on the host machine as part of the build. +# IX86 runs on all architectures. +!ifndef TCLSH_NATIVE +!if "$(MACHINE)" == "IX86" || "$(MACHINE)" == "$(NATIVE_ARCH)" +TCLSH_NATIVE = $(TCLSH) +!else +!error You must explicitly set TCLSH_NATIVE for cross-compilation +!endif +!endif + +# Do the same for Tk and Tk extensions that require the Tk libraries +!if $(DOING_TK) || $(NEED_TK) +WISHNAMEPREFIX = wish +WISHNAME = $(WISHNAMEPREFIX)$(TK_VERSION)$(SUFX).exe +TKLIBNAME8 = tk$(TK_VERSION)$(SUFX).$(EXT) +TKLIBNAME9 = tcl9tk$(TK_VERSION)$(SUFX).$(EXT) +!if $(TCL_MAJOR_VERSION) == 8 || "$(TCL_BUILD_FOR)" == "8" +TKLIBNAME = tk$(TK_VERSION)$(SUFX).$(EXT) +TKIMPLIBNAME = tk$(TK_VERSION)$(SUFX).lib +!else +TKLIBNAME = tcl9tk$(TK_VERSION)$(SUFX).$(EXT) +TKIMPLIBNAME = tcl9tk$(TK_VERSION)$(SUFX).lib +!endif +!if $(TK_MAJOR_VERSION) == 8 +TKSTUBLIBNAME = tkstub$(TK_VERSION).lib +!else +TKSTUBLIBNAME = tkstub.lib +!endif + +!if $(DOING_TK) +WISH = $(OUT_DIR)\$(WISHNAME) +TKSTUBLIB = $(OUT_DIR)\$(TKSTUBLIBNAME) +TKIMPLIB = $(OUT_DIR)\$(TKIMPLIBNAME) +TKLIB = $(OUT_DIR)\$(TKLIBNAME) +TK_INCLUDES = -I"$(WIN_DIR)" -I"$(GENERICDIR)" +TKSCRIPTZIP = $(OUT_DIR)\$(TKSCRIPTZIPNAME) + +!else # effectively NEED_TK + +!if $(TKINSTALL) # Building against installed Tk +WISH = $(_TKDIR)\bin\$(WISHNAME) +TKSTUBLIB = $(_TKDIR)\lib\$(TKSTUBLIBNAME) +TKIMPLIB = $(_TKDIR)\lib\$(TKIMPLIBNAME) +# When building extensions, may be linking against Tk that does not add +# "t" suffix (e.g. 8.5 or 8.7). If lib not found check for that possibility. +!if !exist("$(TKIMPLIB)") +TKIMPLIBNAME = tk$(TK_VERSION)$(SUFX:t=).lib +TKIMPLIB = $(_TKDIR)\lib\$(TKIMPLIBNAME) +!endif +TK_INCLUDES = -I"$(_TKDIR)\include" +TKSCRIPTZIP = $(_TKDIR)\lib\$(TKSCRIPTZIPNAME) + +!else # Building against Tk sources + +WISH = $(_TKDIR)\win\$(BUILDDIRTOP)\$(WISHNAME) +TKSTUBLIB = $(_TKDIR)\win\$(BUILDDIRTOP)\$(TKSTUBLIBNAME) +TKIMPLIB = $(_TKDIR)\win\$(BUILDDIRTOP)\$(TKIMPLIBNAME) +# When building extensions, may be linking against Tk that does not add +# "t" suffix (e.g. 8.5 or 8.7). If lib not found check for that possibility. +!if !exist("$(TKIMPLIB)") +TKIMPLIBNAME = tk$(TK_VERSION)$(SUFX:t=).lib +TKIMPLIB = $(_TKDIR)\win\$(BUILDDIRTOP)\$(TKIMPLIBNAME) +!endif +TK_INCLUDES = -I"$(_TKDIR)\generic" -I"$(_TKDIR)\win" -I"$(_TKDIR)\xlib" +TKSCRIPTZIP = $(_TKDIR)\win\$(BUILDDIRTOP)\$(TKSCRIPTZIPNAME) + +!endif # TKINSTALL + +tklibs = "$(TKSTUBLIB)" "$(TKIMPLIB)" + +!endif # $(DOING_TK) +!endif # $(DOING_TK) || $(NEED_TK) + +# Various output paths +PRJIMPLIB = $(OUT_DIR)\$(PROJECT)$(VERSION)$(SUFX).lib +PRJLIBNAME8 = $(PROJECT)$(VERSION)$(SUFX).$(EXT) +PRJLIBNAME9 = tcl9$(PROJECT)$(VERSION)$(SUFX).$(EXT) +!if $(TCL_MAJOR_VERSION) == 8 || "$(TCL_BUILD_FOR)" == "8" +PRJLIBNAME = $(PRJLIBNAME8) +!else +PRJLIBNAME = $(PRJLIBNAME9) +!endif +PRJLIB = $(OUT_DIR)\$(PRJLIBNAME) + +!if $(TCL_MAJOR_VERSION) == 8 +PRJSTUBLIBNAME = $(STUBPREFIX)$(VERSION).lib +!else +PRJSTUBLIBNAME = $(STUBPREFIX).lib +!endif +PRJSTUBLIB = $(OUT_DIR)\$(PRJSTUBLIBNAME) + +# If extension parent makefile has not defined a resource definition file, +# we will generate one from standard template. +!if !$(DOING_TCL) && !$(DOING_TK) && !$(STATIC_BUILD) +!ifdef RCFILE +RESFILE = $(TMP_DIR)\$(RCFILE:.rc=.res) +!else +RESFILE = $(TMP_DIR)\$(PROJECT).res +!endif +!endif + +################################################################### +# 11. Construct the paths for the installation directories +# The following macros get defined in this section: +# LIB_INSTALL_DIR - where libraries should be installed +# BIN_INSTALL_DIR - where the executables should be installed +# DOC_INSTALL_DIR - where documentation should be installed +# SCRIPT_INSTALL_DIR - where scripts should be installed +# INCLUDE_INSTALL_DIR - where C include files should be installed +# DEMO_INSTALL_DIR - where demos should be installed +# PRJ_INSTALL_DIR - where package will be installed (not set for Tcl and Tk) + +!if $(DOING_TCL) || $(DOING_TK) +LIB_INSTALL_DIR = $(_INSTALLDIR)\lib +BIN_INSTALL_DIR = $(_INSTALLDIR)\bin +DOC_INSTALL_DIR = $(_INSTALLDIR)\doc +!if $(DOING_TCL) +SCRIPT_INSTALL_DIR = $(_INSTALLDIR)\lib\$(PROJECT)$(TCL_MAJOR_VERSION).$(TCL_MINOR_VERSION) +MODULE_INSTALL_DIR = $(_INSTALLDIR)\lib\tcl$(TCL_MAJOR_VERSION) +!else # DOING_TK +SCRIPT_INSTALL_DIR = $(_INSTALLDIR)\lib\$(PROJECT)$(TK_MAJOR_VERSION).$(TK_MINOR_VERSION) +!endif +DEMO_INSTALL_DIR = $(SCRIPT_INSTALL_DIR)\demos +INCLUDE_INSTALL_DIR = $(_INSTALLDIR)\include + +!else # extension other than Tk + +PRJ_INSTALL_DIR = $(_INSTALLDIR)\$(PROJECT)$(DOTVERSION) +!if $(MULTIPLATFORM_INSTALL) +LIB_INSTALL_DIR = $(PRJ_INSTALL_DIR)\$(PLATFORM_IDENTIFY) +BIN_INSTALL_DIR = $(PRJ_INSTALL_DIR)\$(PLATFORM_IDENTIFY) +!else +LIB_INSTALL_DIR = $(PRJ_INSTALL_DIR) +BIN_INSTALL_DIR = $(PRJ_INSTALL_DIR) +!endif +DOC_INSTALL_DIR = $(PRJ_INSTALL_DIR) +SCRIPT_INSTALL_DIR = $(PRJ_INSTALL_DIR) +DEMO_INSTALL_DIR = $(PRJ_INSTALL_DIR)\demos +INCLUDE_INSTALL_DIR = $(_INSTALLDIR)\..\include + +!endif + +################################################################### +# 12. Set up actual options to be passed to the compiler and linker +# Now we have all the information we need, set up the actual flags and +# options that we will pass to the compiler and linker. The main +# makefile should use these in combination with whatever other flags +# and switches are specific to it. +# The following macros are defined, names are for historical compatibility: +# OPTDEFINES - /Dxxx C macro flags based on user-specified OPTS +# COMPILERFLAGS - /Dxxx C macro flags independent of any configuration options +# crt - Compiler switch that selects the appropriate C runtime +# cdebug - Compiler switches related to debug AND optimizations +# cwarn - Compiler switches that set warning levels +# cflags - complete compiler switches (subsumes cdebug and cwarn) +# ldebug - Linker switches controlling debug information and optimization +# lflags - complete linker switches (subsumes ldebug) except subsystem type +# dlllflags - complete linker switches to build DLLs (subsumes lflags) +# conlflags - complete linker switches for console program (subsumes lflags) +# guilflags - complete linker switches for GUI program (subsumes lflags) +# baselibs - minimum Windows libraries required. Parent makefile can +# define PRJ_LIBS before including rules.rc if additional libs are needed + +OPTDEFINES = /DSTDC_HEADERS /DUSE_NMAKE=1 +!if $(VCVERSION) > 1600 +OPTDEFINES = $(OPTDEFINES) /DHAVE_STDINT_H=1 +!else +OPTDEFINES = $(OPTDEFINES) /DMP_NO_STDINT=1 +!endif +!if $(VCVERSION) >= 1800 +OPTDEFINES = $(OPTDEFINES) /DHAVE_INTTYPES_H=1 /DHAVE_STDBOOL_H=1 +!endif + +!if $(TCL_MEM_DEBUG) +OPTDEFINES = $(OPTDEFINES) /DTCL_MEM_DEBUG +!endif +!if $(TCL_COMPILE_DEBUG) +OPTDEFINES = $(OPTDEFINES) /DTCL_COMPILE_DEBUG /DTCL_COMPILE_STATS +!endif +!if $(TCL_THREADS) && $(TCL_VERSION) < 87 +OPTDEFINES = $(OPTDEFINES) /DTCL_THREADS=1 +!if $(USE_THREAD_ALLOC) && $(TCL_VERSION) < 87 +OPTDEFINES = $(OPTDEFINES) /DUSE_THREAD_ALLOC=1 +!endif +!endif +!if $(STATIC_BUILD) +OPTDEFINES = $(OPTDEFINES) /DSTATIC_BUILD +!elseif $(TCL_VERSION) > 86 +OPTDEFINES = $(OPTDEFINES) /DTCL_WITH_EXTERNAL_TOMMATH +!if "$(MACHINE)" == "AMD64" || "$(MACHINE)" == "ARM64" +OPTDEFINES = $(OPTDEFINES) /DMP_64BIT +!endif +!endif +!if $(TCL_NO_DEPRECATED) +OPTDEFINES = $(OPTDEFINES) /DTCL_NO_DEPRECATED +!endif + +!if $(USE_STUBS) +# Note we do not define USE_TCL_STUBS even when building tk since some +# test targets in tk do not use stubs +!if !$(DOING_TCL) +USE_STUBS_DEFS = /DUSE_TCL_STUBS /DUSE_TCLOO_STUBS +!if $(NEED_TK) +USE_STUBS_DEFS = $(USE_STUBS_DEFS) /DUSE_TK_STUBS +!endif +!endif +!endif # USE_STUBS + +!if !$(DEBUG) +OPTDEFINES = $(OPTDEFINES) /DNDEBUG +!if $(OPTIMIZING) +OPTDEFINES = $(OPTDEFINES) /DTCL_CFG_OPTIMIZED +!endif +!endif +!if $(PROFILE) +OPTDEFINES = $(OPTDEFINES) /DTCL_CFG_PROFILED +!endif +!if "$(MACHINE)" == "AMD64" || "$(MACHINE)" == "ARM64" +OPTDEFINES = $(OPTDEFINES) /DTCL_CFG_DO64BIT +!endif +!if $(VCVERSION) < 1300 +OPTDEFINES = $(OPTDEFINES) /DNO_STRTOI64=1 +!endif + +!if $(TCL_MAJOR_VERSION) == 8 +!if "$(_USE_64BIT_TIME_T)" == "1" +OPTDEFINES = $(OPTDEFINES) /D_USE_64BIT_TIME_T=1 +!endif + +# _ATL_XP_TARGETING - Newer SDK's need this to build for XP +COMPILERFLAGS = /D_ATL_XP_TARGETING +!endif +!if "$(TCL_BUILD_FOR)" == "8" +OPTDEFINES = $(OPTDEFINES) /DTCL_MAJOR_VERSION=8 +!endif + +# Like the TEA system only set this non empty for non-Tk extensions +# Note: some extensions use PACKAGE_NAME and others use PACKAGE_TCLNAME +# so we pass both +!if !$(DOING_TCL) && !$(DOING_TK) +PKGNAMEFLAGS = /DPACKAGE_NAME="\"$(PRJ_PACKAGE_TCLNAME)\"" \ + /DPACKAGE_TCLNAME="\"$(PRJ_PACKAGE_TCLNAME)\"" \ + /DPACKAGE_VERSION="\"$(DOTVERSION)\"" \ + /DMODULE_SCOPE=extern +!endif + +# crt picks the C run time based on selected OPTS +!if $(MSVCRT) +!if $(DEBUG) && !$(UNCHECKED) +crt = -MDd +!else +crt = -MD +!endif +!else +!if $(DEBUG) && !$(UNCHECKED) +crt = -MTd +!else +crt = -MT +!endif +!endif + +# cdebug includes compiler options for debugging as well as optimization. +!if $(DEBUG) + +# In debugging mode, optimizations need to be disabled +cdebug = -Zi -Od $(DEBUGFLAGS) + +!else + +cdebug = $(OPTIMIZATIONS) +!if $(SYMBOLS) +cdebug = $(cdebug) -Zi +!endif + +!endif # $(DEBUG) + +# cwarn includes default warning levels, also C4090 (buggy) and C4146 is useless. +cwarn = $(WARNINGS) -wd4090 -wd4146 + +!if "$(MACHINE)" == "AMD64" || "$(MACHINE)" == "ARM64" +# Disable pointer<->int warnings related to cast between different sizes +# There are a gadzillion of these due to use of ClientData and +# clutter up compiler +# output increasing chance of a real warning getting lost. So disable them. +# Eventually some day, Tcl will be 64-bit clean. +cwarn = $(cwarn) -wd4311 -wd4312 +!endif + +### Common compiler options that are architecture specific +!if "$(MACHINE)" == "ARM" +carch = /D_ARM_WINAPI_PARTITION_DESKTOP_SDK_AVAILABLE +!else +carch = +!endif + +# cpuid is only available on intel machines +!if "$(MACHINE)" == "IX86" || "$(MACHINE)" == "AMD64" +carch = $(carch) /DHAVE_CPUID=1 +!endif + +!if $(DEBUG) +# Turn warnings into errors +cwarn = $(cwarn) -WX +!endif + +INCLUDES = $(TCL_INCLUDES) $(TK_INCLUDES) $(PRJ_INCLUDES) +!if !$(DOING_TCL) && !$(DOING_TK) +INCLUDES = $(INCLUDES) -I"$(GENERICDIR)" -I"$(WIN_DIR)" -I"$(COMPATDIR)" +!endif + +# These flags are defined roughly in the order of the pre-reform +# rules.vc/makefile.vc to help visually compare that the pre- and +# post-reform build logs + +# cflags contains generic flags used for building practically all object files +cflags = -nologo -c $(COMPILERFLAGS) $(carch) $(cwarn) -Fp$(TMP_DIR)^\ $(cdebug) + +!if $(TCL_MAJOR_VERSION) == 8 && $(TCL_MINOR_VERSION) < 7 +cflags = $(cflags) -DTcl_Size=int +!endif + +# appcflags contains $(cflags) and flags for building the application +# object files (e.g. tclsh, or wish) pkgcflags contains $(cflags) plus +# flags used for building shared object files The two differ in the +# BUILD_$(PROJECT) macro which should be defined only for the shared +# library *implementation* and not for its caller interface + +appcflags_nostubs = $(cflags) $(crt) $(INCLUDES) $(TCL_DEFINES) $(PRJ_DEFINES) $(OPTDEFINES) +appcflags = $(appcflags_nostubs) $(USE_STUBS_DEFS) +pkgcflags = $(appcflags) $(PKGNAMEFLAGS) /DBUILD_$(PROJECT) +pkgcflags_nostubs = $(appcflags_nostubs) $(PKGNAMEFLAGS) /DBUILD_$(PROJECT) + +# stubscflags contains $(cflags) plus flags used for building a stubs +# library for the package. Note: /DSTATIC_BUILD is defined in +# $(OPTDEFINES) only if the OPTS configuration indicates a static +# library. However the stubs library is ALWAYS static hence included +# here irrespective of the OPTS setting. +# +# TBD - tclvfs has a comment that stubs libs should not be compiled with -GL +# without stating why. Tcl itself compiled stubs libs with this flag. +# so we do not remove it from cflags. -GL may prevent extensions +# compiled with one VC version to fail to link against stubs library +# compiled with another VC version. Check for this and fix accordingly. +stubscflags = $(cflags) $(PKGNAMEFLAGS) $(PRJ_DEFINES) $(OPTDEFINES) /Zl /GL- /DSTATIC_BUILD $(INCLUDES) $(USE_STUBS_DEFS) + +# Link flags + +!if $(DEBUG) +ldebug = -debug -debugtype:cv +!else +ldebug = -release -opt:ref -opt:icf,3 +!if $(SYMBOLS) +ldebug = $(ldebug) -debug -debugtype:cv +!endif +!endif + +# Note: Profiling is currently only possible with the Visual Studio Enterprise +!if $(PROFILE) +ldebug= $(ldebug) -profile +!endif + +### Declarations common to all linker versions +lflags = -nologo -machine:$(MACHINE) $(LINKERFLAGS) $(ldebug) + +!if $(MSVCRT) && !($(DEBUG) && !$(UNCHECKED)) && $(VCVERSION) >= 1900 +lflags = $(lflags) -nodefaultlib:libucrt.lib +!endif + +dlllflags = $(lflags) -dll +conlflags = $(lflags) -subsystem:console +guilflags = $(lflags) -subsystem:windows + +# Libraries that are required for every image. +# Extensions should define any additional libraries with $(PRJ_LIBS) +winlibs = kernel32.lib advapi32.lib + +!if $(NEED_TK) +winlibs = $(winlibs) gdi32.lib user32.lib uxtheme.lib +!endif + +# Avoid 'unresolved external symbol __security_cookie' errors. +# c.f. http://support.microsoft.com/?id=894573 +!if "$(MACHINE)" == "AMD64" +!if $(VCVERSION) > 1399 && $(VCVERSION) < 1500 +winlibs = $(winlibs) bufferoverflowU.lib +!endif +!endif + +baselibs = $(winlibs) $(PRJ_LIBS) + +!if $(MSVCRT) && !($(DEBUG) && !$(UNCHECKED)) && $(VCVERSION) >= 1900 +baselibs = $(baselibs) ucrt.lib +!endif + +################################################################ +# 13. Define standard commands, common make targets and implicit rules + +CCPKGCMD = $(cc32) $(pkgcflags) -Fo$(TMP_DIR)^\ +CCAPPCMD = $(cc32) $(appcflags) -Fo$(TMP_DIR)^\ +CCSTUBSCMD = $(cc32) $(stubscflags) -Fo$(TMP_DIR)^\ + +LIBCMD = $(lib32) -nologo $(LINKERFLAGS) -out:$@ +DLLCMD = $(link32) $(dlllflags) -out:$@ $(baselibs) $(tcllibs) $(tklibs) + +CONEXECMD = $(link32) $(conlflags) -out:$@ $(baselibs) $(tcllibs) $(tklibs) +GUIEXECMD = $(link32) $(guilflags) -out:$@ $(baselibs) $(tcllibs) $(tklibs) +RESCMD = $(rc32) -fo $@ -r -i "$(GENERICDIR)" -i "$(TMP_DIR)" \ + $(TCL_INCLUDES) /DSTATIC_BUILD=$(STATIC_BUILD) \ + /DDEBUG=$(DEBUG) -d UNCHECKED=$(UNCHECKED) \ + /DCOMMAVERSION=$(RCCOMMAVERSION) \ + /DDOTVERSION=\"$(DOTVERSION)\" \ + /DVERSION=\"$(VERSION)\" \ + /DSUFX=\"$(SUFX)\" \ + /DPROJECT=\"$(PROJECT)\" \ + /DPRJLIBNAME=\"$(PRJLIBNAME)\" + +!ifndef DEFAULT_BUILD_TARGET +DEFAULT_BUILD_TARGET = $(PROJECT) +!endif + +default-target: $(DEFAULT_BUILD_TARGET) + +!if $(MULTIPLATFORM_INSTALL) +default-pkgindex: + @echo if {[package vsatisfies [package provide Tcl] 9.0-]} { > $(OUT_DIR)\pkgIndex.tcl + @echo package ifneeded $(PRJ_PACKAGE_TCLNAME) $(DOTVERSION) \ + [list load [file join $$dir $(PLATFORM_IDENTIFY) $(PRJLIBNAME9)]] >> $(OUT_DIR)\pkgIndex.tcl + @echo } else { >> $(OUT_DIR)\pkgIndex.tcl + @echo package ifneeded $(PRJ_PACKAGE_TCLNAME) $(DOTVERSION) \ + [list load [file join $$dir $(PLATFORM_IDENTIFY) $(PRJLIBNAME8)]] >> $(OUT_DIR)\pkgIndex.tcl + @echo } >> $(OUT_DIR)\pkgIndex.tcl +!else +default-pkgindex: + @echo if {[package vsatisfies [package provide Tcl] 9.0-]} { > $(OUT_DIR)\pkgIndex.tcl + @echo package ifneeded $(PRJ_PACKAGE_TCLNAME) $(DOTVERSION) \ + [list load [file join $$dir $(PRJLIBNAME9)]] >> $(OUT_DIR)\pkgIndex.tcl + @echo } else { >> $(OUT_DIR)\pkgIndex.tcl + @echo package ifneeded $(PRJ_PACKAGE_TCLNAME) $(DOTVERSION) \ + [list load [file join $$dir $(PRJLIBNAME8)]] >> $(OUT_DIR)\pkgIndex.tcl + @echo } >> $(OUT_DIR)\pkgIndex.tcl +!endif + +default-pkgindex-tea: + @if exist $(ROOT)\pkgIndex.tcl.in nmakehlp -s << $(ROOT)\pkgIndex.tcl.in > $(OUT_DIR)\pkgIndex.tcl +@PACKAGE_VERSION@ $(DOTVERSION) +@PACKAGE_NAME@ $(PRJ_PACKAGE_TCLNAME) +@PACKAGE_TCLNAME@ $(PRJ_PACKAGE_TCLNAME) +@PKG_LIB_FILE@ $(PRJLIBNAME) +@PKG_LIB_FILE8@ $(PRJLIBNAME8) +@PKG_LIB_FILE9@ $(PRJLIBNAME9) +<< + +default-install: default-install-binaries default-install-libraries +!if $(SYMBOLS) +default-install: default-install-pdbs +!endif + +# Again to deal with historical brokenness, there is some confusion +# in terminlogy. For extensions, the "install-binaries" was used to +# locate target directory for *binary shared libraries* and thus +# the appropriate macro is LIB_INSTALL_DIR since BIN_INSTALL_DIR is +# for executables (exes). On the other hand the "install-libraries" +# target is for *scripts* and should have been called "install-scripts". +default-install-binaries: $(PRJLIB) + @echo Installing binaries to '$(LIB_INSTALL_DIR)' + @if not exist "$(LIB_INSTALL_DIR)" mkdir "$(LIB_INSTALL_DIR)" + @$(CPY) $(PRJLIB) "$(LIB_INSTALL_DIR)" >NUL + +# Alias for default-install-scripts +default-install-libraries: default-install-scripts + +default-install-scripts: $(OUT_DIR)\pkgIndex.tcl + @echo Installing libraries to '$(SCRIPT_INSTALL_DIR)' + @if exist $(LIBDIR) $(CPY) $(LIBDIR)\*.tcl "$(SCRIPT_INSTALL_DIR)" + @echo Installing package index in '$(SCRIPT_INSTALL_DIR)' + @$(CPY) $(OUT_DIR)\pkgIndex.tcl $(SCRIPT_INSTALL_DIR) + +default-install-stubs: + @echo Installing stubs library to '$(SCRIPT_INSTALL_DIR)' + @if not exist "$(SCRIPT_INSTALL_DIR)" mkdir "$(SCRIPT_INSTALL_DIR)" + @$(CPY) $(PRJSTUBLIB) "$(SCRIPT_INSTALL_DIR)" >NUL + +default-install-pdbs: + @echo Installing PDBs to '$(LIB_INSTALL_DIR)' + @if not exist "$(LIB_INSTALL_DIR)" mkdir "$(LIB_INSTALL_DIR)" + @$(CPY) "$(OUT_DIR)\*.pdb" "$(LIB_INSTALL_DIR)\" + +# "emacs font-lock highlighting fix + +default-install-docs-html: + @echo Installing documentation files to '$(DOC_INSTALL_DIR)' + @if not exist "$(DOC_INSTALL_DIR)" mkdir "$(DOC_INSTALL_DIR)" + @if exist $(DOCDIR) for %f in ("$(DOCDIR)\*.html" "$(DOCDIR)\*.css" "$(DOCDIR)\*.png") do @$(COPY) %f "$(DOC_INSTALL_DIR)" + +default-install-docs-n: + @echo Installing documentation files to '$(DOC_INSTALL_DIR)' + @if not exist "$(DOC_INSTALL_DIR)" mkdir "$(DOC_INSTALL_DIR)" + @if exist $(DOCDIR) for %f in ("$(DOCDIR)\*.n") do @$(COPY) %f "$(DOC_INSTALL_DIR)" + +default-install-demos: + @echo Installing demos to '$(DEMO_INSTALL_DIR)' + @if not exist "$(DEMO_INSTALL_DIR)" mkdir "$(DEMO_INSTALL_DIR)" + @if exist $(DEMODIR) $(CPYDIR) "$(DEMODIR)" "$(DEMO_INSTALL_DIR)" + +default-clean: + @echo Cleaning $(TMP_DIR)\* ... + @if exist $(TMP_DIR)\nul $(RMDIR) $(TMP_DIR) + @echo Cleaning $(WIN_DIR)\nmakehlp.obj, nmakehlp.exe ... + @if exist $(WIN_DIR)\nmakehlp.obj del $(WIN_DIR)\nmakehlp.obj + @if exist $(WIN_DIR)\nmakehlp.exe del $(WIN_DIR)\nmakehlp.exe + @if exist $(WIN_DIR)\nmakehlp.out del $(WIN_DIR)\nmakehlp.out + @echo Cleaning $(WIN_DIR)\nmhlp-out.txt ... + @if exist $(WIN_DIR)\nmhlp-out.txt del $(WIN_DIR)\nmhlp-out.txt + @echo Cleaning $(WIN_DIR)\_junk.pch ... + @if exist $(WIN_DIR)\_junk.pch del $(WIN_DIR)\_junk.pch + @echo Cleaning $(WIN_DIR)\vercl.x, vercl.i ... + @if exist $(WIN_DIR)\vercl.x del $(WIN_DIR)\vercl.x + @if exist $(WIN_DIR)\vercl.i del $(WIN_DIR)\vercl.i + @echo Cleaning $(WIN_DIR)\versions.vc, version.vc ... + @if exist $(WIN_DIR)\versions.vc del $(WIN_DIR)\versions.vc + @if exist $(WIN_DIR)\version.vc del $(WIN_DIR)\version.vc + +default-hose: default-clean + @echo Hosing $(OUT_DIR)\* ... + @if exist $(OUT_DIR)\nul $(RMDIR) $(OUT_DIR) + +# Only for backward compatibility +default-distclean: default-hose + +default-setup: + @if not exist $(OUT_DIR)\nul mkdir $(OUT_DIR) + @if not exist $(TMP_DIR)\nul mkdir $(TMP_DIR) + +!if "$(TESTPAT)" != "" +TESTFLAGS = $(TESTFLAGS) -file $(TESTPAT) +!endif + +default-test: default-setup $(PROJECT) + @set TCLLIBPATH=$(OUT_DIR:\=/) + @if exist $(LIBDIR) for %f in ("$(LIBDIR)\*.tcl") do @$(COPY) %f "$(OUT_DIR)" + cd "$(TESTDIR)" && $(DEBUGGER) $(TCLSH) all.tcl $(TESTFLAGS) + +default-shell: default-setup $(PROJECT) + @set TCLLIBPATH=$(OUT_DIR:\=/) + @if exist $(LIBDIR) for %f in ("$(LIBDIR)\*.tcl") do @$(COPY) %f "$(OUT_DIR)" + $(DEBUGGER) $(TCLSH) + +# Generation of Windows version resource +!ifdef RCFILE + +# Note: don't use $** in below rule because there may be other dependencies +# and only the "main" rc must be passed to the resource compiler +$(TMP_DIR)\$(PROJECT).res: $(RCDIR)\$(PROJECT).rc + $(RESCMD) $(RCDIR)\$(PROJECT).rc + +!else + +# If parent makefile has not defined a resource definition file, +# we will generate one from standard template. +$(TMP_DIR)\$(PROJECT).res: $(TMP_DIR)\$(PROJECT).rc + +$(TMP_DIR)\$(PROJECT).rc: + @$(COPY) << $(TMP_DIR)\$(PROJECT).rc +#include + +VS_VERSION_INFO VERSIONINFO + FILEVERSION COMMAVERSION + PRODUCTVERSION COMMAVERSION + FILEFLAGSMASK 0x3fL +#ifdef DEBUG + FILEFLAGS VS_FF_DEBUG +#else + FILEFLAGS 0x0L +#endif + FILEOS VOS_NT_WINDOWS32 + FILETYPE VFT_DLL + FILESUBTYPE 0x0L +BEGIN + BLOCK "StringFileInfo" + BEGIN + BLOCK "040904b0" + BEGIN + VALUE "FileDescription", "Tcl extension " PROJECT + VALUE "OriginalFilename", PRJLIBNAME + VALUE "FileVersion", DOTVERSION + VALUE "ProductName", "Package " PROJECT " for Tcl" + VALUE "ProductVersion", DOTVERSION + END + END + BLOCK "VarFileInfo" + BEGIN + VALUE "Translation", 0x409, 1200 + END +END + +<< + +!endif # ifdef RCFILE + +!ifndef DISABLE_IMPLICIT_RULES +DISABLE_IMPLICIT_RULES = 0 +!endif + +!if !$(DISABLE_IMPLICIT_RULES) +# Implicit rule definitions - only for building library objects. For stubs and +# main application, the makefile should define explicit rules. + +{$(ROOT)}.c{$(TMP_DIR)}.obj:: + $(CCPKGCMD) @<< +$< +<< + +{$(WIN_DIR)}.c{$(TMP_DIR)}.obj:: + $(CCPKGCMD) @<< +$< +<< + +{$(GENERICDIR)}.c{$(TMP_DIR)}.obj:: + $(CCPKGCMD) @<< +$< +<< + +{$(COMPATDIR)}.c{$(TMP_DIR)}.obj:: + $(CCPKGCMD) @<< +$< +<< + +{$(RCDIR)}.rc{$(TMP_DIR)}.res: + $(RESCMD) $< + +{$(WIN_DIR)}.rc{$(TMP_DIR)}.res: + $(RESCMD) $< + +{$(TMP_DIR)}.rc{$(TMP_DIR)}.res: + $(RESCMD) $< + +.SUFFIXES: +.SUFFIXES:.c .rc + +!endif + +################################################################ +# 14. Sanity check selected options against Tcl build options +# When building an extension, certain configuration options should +# match the ones used when Tcl was built. Here we check and +# warn on a mismatch. +!if !$(DOING_TCL) + +!if $(TCLINSTALL) # Building against an installed Tcl +!if exist("$(_TCLDIR)\lib\nmake\tcl.nmake") +TCLNMAKECONFIG = "$(_TCLDIR)\lib\nmake\tcl.nmake" +!endif +!else # !$(TCLINSTALL) - building against Tcl source +!if exist("$(_TCLDIR)\win\$(BUILDDIRTOP)\tcl.nmake") +TCLNMAKECONFIG = "$(_TCLDIR)\win\$(BUILDDIRTOP)\tcl.nmake" +!endif +!endif # TCLINSTALL + +!if $(CONFIG_CHECK) +!ifdef TCLNMAKECONFIG +!include $(TCLNMAKECONFIG) + +!if defined(CORE_MACHINE) && "$(CORE_MACHINE)" != "$(MACHINE)" +!error ERROR: Build target ($(MACHINE)) does not match the Tcl library architecture ($(CORE_MACHINE)). +!endif +!if $(TCL_VERSION) < 87 && defined(CORE_USE_THREAD_ALLOC) && $(CORE_USE_THREAD_ALLOC) != $(USE_THREAD_ALLOC) +!message WARNING: Value of USE_THREAD_ALLOC ($(USE_THREAD_ALLOC)) does not match its Tcl core value ($(CORE_USE_THREAD_ALLOC)). +!endif +!if defined(CORE_DEBUG) && $(CORE_DEBUG) != $(DEBUG) +!message WARNING: Value of DEBUG ($(DEBUG)) does not match its Tcl library configuration ($(DEBUG)). +!endif +!endif + +!endif # TCLNMAKECONFIG + +!endif # !$(DOING_TCL) + + +#---------------------------------------------------------- +# Display stats being used. +#---------------------------------------------------------- + +!if !$(DOING_TCL) +!message *** Building against Tcl at '$(_TCLDIR)' +!endif +!if !$(DOING_TK) && $(NEED_TK) +!message *** Building against Tk at '$(_TKDIR)' +!endif +!message *** Intermediate directory will be '$(TMP_DIR)' +!message *** Output directory will be '$(OUT_DIR)' +!message *** Installation, if selected, will be in '$(_INSTALLDIR)' +!message *** Suffix for binaries will be '$(SUFX)' +!message *** Compiler version $(VCVER). Target $(MACHINE), host $(NATIVE_ARCH). + +!endif # ifdef _RULES_VC ADDED win/svnmanifest.in Index: win/svnmanifest.in ================================================================== --- /dev/null +++ win/svnmanifest.in @@ -0,0 +1,1 @@ +svn-r Index: win/targets.vc ================================================================== --- win/targets.vc +++ win/targets.vc @@ -2,11 +2,11 @@ # targets.vc -- # # Part of the nmake based build system for Tcl and its extensions. # This file defines some standard targets for the convenience of extensions # and can be optionally included by the extension makefile. -# See TIP 477 (https://core.tcl-lang.org/tips/doc/trunk/tip/477.md) for docs. +# See TIP 477 (https://core.tcl-lang.org/tips/doc/main/tip/477.md) for docs. $(PROJECT): setup pkgindex $(PRJLIB) !ifdef PRJ_STUBOBJS $(PROJECT): $(PRJSTUBLIB) ADDED win/x86_64-w64-mingw32-nmakehlp.exe Index: win/x86_64-w64-mingw32-nmakehlp.exe ================================================================== --- /dev/null +++ win/x86_64-w64-mingw32-nmakehlp.exe cannot compute difference between binary files