ADDED .fossil-settings/ignore-glob Index: .fossil-settings/ignore-glob ================================================================== --- /dev/null +++ .fossil-settings/ignore-glob @@ -0,0 +1,2 @@ +aclocal +aclocal.m4 DELETED aclocal.m4 Index: aclocal.m4 ================================================================== --- aclocal.m4 +++ /dev/null @@ -1,161 +0,0 @@ -builtin(include,tclconfig/tcl.m4) - -#------------------------------------------------------------------------ -# TLS_SSL_DIR -- -# -# Locate the installed ssl files -# -# Arguments: -# None. -# -# Requires: -# CYGPATH must be set -# -# Results: -# -# Adds a --with-ssl-dir switch to configure. -# Result is cached. -# -# Substs the following vars: -# SSL_DIR -#------------------------------------------------------------------------ - -AC_DEFUN(TLS_CHECK_SSL, [ - - #-------------------------------------------------------------------- - # If the variable OPENSSL is set, we will build with the OpenSSL - # libraries. If it is not set, then we will use RSA BSAFE SSL-C - # libraries instead of the default OpenSSL libaries. - #-------------------------------------------------------------------- - - AC_ARG_ENABLE(bsafe, [ --enable-bsafe Use RSA BSAFE SSL-C libs. Default is to use OpenSSL libs], OPENSSL="", OPENSSL="1") - - #-------------------------------------------------------------------- - # Establish the location of the root directory for OpenSSL. - # If we're not using OpenSSL, set the root for BSAFE SSL-C. - # If we're using BSAFE, define the BSAFE compiler flag. - # The "FLAT_INC" flag is used in the BSAFE ssl.h header file and - # doesn't seem to be referenced anywhere else. - #-------------------------------------------------------------------- - if test -n "${OPENSSL}"; then - SSL_DIR='/usr /usr/local' - AC_DEFINE(NO_IDEA) - AC_DEFINE(NO_RC5) - else - SSL_DIR='/usr/sslc /usr/local/sslc' - AC_DEFINE(BSAFE) - AC_DEFINE(FLAT_INC) - fi - - AC_MSG_CHECKING([for SSL directory]) - - AC_ARG_WITH(ssl-dir, [ --with-ssl-dir=DIR SSL root directory], with_ssldir=${withval}) - - AC_CACHE_VAL(ac_cv_c_ssldir, [ - # Use the value from --with-ssl-dir, if it was given - if test x"${with_ssldir}" != x ; then - if test -d "${with_ssldir}" ; then - ac_cv_c_ssldir=${with_ssldir} - else - AC_MSG_ERROR([${with_ssldir} is not a valid directory]) - fi - else - list="`ls -d ${SSL_DIR} 2>/dev/null`" - for i in $list ; do - if test -d "$i" ; then - ac_cv_c_ssldir=$i - break - fi - done - fi - ]) - - # Print a message based on how we determined the include path - - if test x"${ac_cv_c_ssldir}" = x ; then - AC_MSG_ERROR([Could not find SSL directory. -Please specify its location with --with-ssl-dir]) - else - SSL_DIR=${ac_cv_c_ssldir} - AC_MSG_RESULT([${SSL_DIR}]) - fi - - - #-------------------------------------------------------------------- - # The OpenSSL and BSAFE SSL-C directory structures differ. - #-------------------------------------------------------------------- - - if test -n "${OPENSSL}"; then - SSL_LIB_DIR=${SSL_DIR}/lib - SSL_INCLUDE_DIR=${SSL_DIR}/include - if test ! -f "${SSL_INCLUDE_DIR}/openssl/opensslv.h"; then - AC_ERROR([bad ssl-dir: cannot find openssl/opensslv.h under ${SSL_INCLUDE_DIR}]) - fi - else - #-------------------------------------------------------------------- - # If we're using RSA BSAFE SSL-C, we need to establish what platform - # we're running on before we can figure out some paths. - # This step isn't necessary if we're using OpenSSL. - #-------------------------------------------------------------------- - - if test -z "${OPENSSL}"; then - AC_MSG_CHECKING([host type]) - case "`uname -s`" in - *win32* | *WIN32* | *CYGWIN_NT*|*CYGWIN_98*|*CYGWIN_95*) - PLATFORM=WIN32 - ;; - *SunOS*) - PLATFORM=SOLARIS - ;; - HP-UX) - PLATFORM=HPUX - ;; - *) - PLATFORM=LINUX - ;; - esac - AC_MSG_RESULT(${PLATFORM}) - fi - SSL_LIB_DIR=${SSL_DIR}/${PLATFORM}/library/lib - SSL_INCLUDE_DIR=${SSL_DIR}/${PLATFORM}/library/include - if test ! -f "${SSL_INCLUDE_DIR}/crypto.h"; then - AC_ERROR([bad ssl-dir: cannot find crypto.h under ${SSL_INCLUDE_DIR}]) - fi - fi - - AC_SUBST(SSL_DIR) - AC_SUBST(SSL_LIB_DIR) - AC_SUBST(SSL_INCLUDE_DIR) - - SSL_INCLUDE_DIR_NATIVE=\"`${CYGPATH} ${SSL_INCLUDE_DIR}`\" - SSL_LIB_DIR_NATIVE=\"`${CYGPATH} ${SSL_LIB_DIR}`\" - AC_SUBST(SSL_INCLUDE_DIR_NATIVE) - AC_SUBST(SSL_LIB_DIR_NATIVE) - - #-------------------------------------------------------------------- - # If OpenSSL was built with gcc then there may be some symbols that need - # resolving before we can load it into tclsh (__udivd3i on solaris. - # Let the user specify if we need to add libgcc to the link line to - # resolve these symbols. - # - # This doesn't seem to be necessary if the RSA BSAFE SSL-C libraries - # are used instead of OpenSSL. - #-------------------------------------------------------------------- - - if test -n "${OPENSSL}"; then - AC_MSG_CHECKING(if libgcc is needed to resolve openssl symbols) - - AC_ARG_WITH(gcclib, [ --with-gcclib link with libgcc to resolve symbols in a gcc-built openssl library], GCCLIB="-lgcc", GCCLIB="") - - if test "x${GCCLIB}" = "x" ; then - AC_MSG_RESULT(no) - else - AC_MSG_RESULT(yes) - AC_MSG_CHECKING(for gcc library location) - GCCPATH=`${CC} -print-libgcc-file-name | sed -e 's#[^/]*$##'` - GCCPATH="-L${GCCPATH}" - AC_MSG_RESULT(${GCCPATH}) - fi - fi - -]) ADDED autogen.sh Index: autogen.sh ================================================================== --- /dev/null +++ autogen.sh @@ -0,0 +1,36 @@ +#! /usr/bin/env bash + +urls=( + http://chiselapp.com/user/rkeene/repository/autoconf/doc/trunk/tcl.m4 + http://chiselapp.com/user/rkeene/repository/autoconf/doc/trunk/shobj.m4 + http://chiselapp.com/user/rkeene/repository/autoconf/doc/trunk/versionscript.m4 +) + +cd "$(dirname "$(which "$0")")" || exit 1 + +mkdir aclocal >/dev/null 2>/dev/null + +files=() + +for url in "${urls[@]}"; do + file="aclocal/$(echo "${url}" | sed 's@^.*/@@')" + + curl -lsS "${url}" > "${file}.new" || exit 1 + if diff "${file}.new" "${file}" >/dev/null 2>/dev/null; then + rm -f "${file}.new" + else + mv "${file}.new" "${file}" + fi + + files=("${files[@]}" "${file}") +done + +for file in "${files[@]}"; do + cat "${file}" +done > aclocal.m4.new + +if diff aclocal.m4.new aclocal.m4 >/dev/null 2>/dev/null; then + rm -f aclocal.m4.new +else + mv aclocal.m4.new aclocal.m4 +fi DELETED tclconfig/README.txt Index: tclconfig/README.txt ================================================================== --- tclconfig/README.txt +++ /dev/null @@ -1,26 +0,0 @@ -These files comprise the basic building blocks for a Tcl Extension -Architecture (TEA) extension. For more information on TEA see: - - http://www.tcl.tk/doc/tea/ - -This package is part of the Tcl project at SourceForge, and latest -sources should be available there: - - http://tcl.sourceforge.net/ - -This package is a freely available open source package. You can do -virtually anything you like with it, such as modifying it, redistributing -it, and selling it either in whole or in part. - -CONTENTS -======== -The following is a short description of the files you will find in -the sample extension. - -README.txt This file - -install-sh Program used for copying binaries and script files - to their install locations. - -tcl.m4 Collection of Tcl autoconf macros. Included by a package's - aclocal.m4 to define TEA_* macros. DELETED tclconfig/install-sh Index: tclconfig/install-sh ================================================================== --- tclconfig/install-sh +++ /dev/null @@ -1,119 +0,0 @@ -#!/bin/sh - -# -# install - install a program, script, or datafile -# This comes from X11R5; it is not part of GNU. -# -# $XConsortium: install.sh,v 1.2 89/12/18 14:47:22 jim Exp $ -# -# This script is compatible with the BSD install script, but was written -# from scratch. -# - - -# set DOITPROG to echo to test this script - -# Don't use :- since 4.3BSD and earlier shells don't like it. -doit="${DOITPROG-}" - - -# put in absolute paths if you don't have them in your path; or use env. vars. - -mvprog="${MVPROG-mv}" -cpprog="${CPPROG-cp}" -chmodprog="${CHMODPROG-chmod}" -chownprog="${CHOWNPROG-chown}" -chgrpprog="${CHGRPPROG-chgrp}" -stripprog="${STRIPPROG-strip}" -rmprog="${RMPROG-rm}" - -instcmd="$mvprog" -chmodcmd="" -chowncmd="" -chgrpcmd="" -stripcmd="" -rmcmd="$rmprog -f" -mvcmd="$mvprog" -src="" -dst="" - -while [ x"$1" != x ]; do - case $1 in - -c) instcmd="$cpprog" - shift - continue;; - - -m) chmodcmd="$chmodprog $2" - shift - shift - continue;; - - -o) chowncmd="$chownprog $2" - shift - shift - continue;; - - -g) chgrpcmd="$chgrpprog $2" - shift - shift - continue;; - - -s) stripcmd="$stripprog" - shift - continue;; - - *) if [ x"$src" = x ] - then - src=$1 - else - dst=$1 - fi - shift - continue;; - esac -done - -if [ x"$src" = x ] -then - echo "install: no input file specified" - exit 1 -fi - -if [ x"$dst" = x ] -then - echo "install: no destination specified" - exit 1 -fi - - -# If destination is a directory, append the input filename; if your system -# does not like double slashes in filenames, you may need to add some logic - -if [ -d $dst ] -then - dst="$dst"/`basename $src` -fi - -# Make a temp file name in the proper directory. - -dstdir=`dirname $dst` -dsttmp=$dstdir/#inst.$$# - -# Move or copy the file name to the temp name - -$doit $instcmd $src $dsttmp - -# and set any options; do chmod last to preserve setuid bits - -if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; fi -if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; fi -if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; fi -if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; fi - -# Now rename the file to the real destination. - -$doit $rmcmd $dst -$doit $mvcmd $dsttmp $dst - - -exit 0 DELETED tclconfig/tcl.m4 Index: tclconfig/tcl.m4 ================================================================== --- tclconfig/tcl.m4 +++ /dev/null @@ -1,3998 +0,0 @@ -# tcl.m4 -- -# -# This file provides a set of autoconf macros to help TEA-enable -# a Tcl extension. -# -# Copyright (c) 1999-2000 Ajuba Solutions. -# Copyright (c) 2002-2005 ActiveState Corporation. -# -# See the file "license.terms" for information on usage and redistribution -# of this file, and for a DISCLAIMER OF ALL WARRANTIES. -# -# RCS: @(#) $Id: tcl.m4,v 1.7 2010/08/12 01:30:44 hobbs2 Exp $ - -AC_PREREQ(2.57) - -dnl TEA extensions pass us the version of TEA they think they -dnl are compatible with (must be set in TEA_INIT below) -dnl TEA_VERSION="3.8" - -# Possible values for key variables defined: -# -# TEA_WINDOWINGSYSTEM - win32 aqua x11 (mirrors 'tk windowingsystem') -# TEA_PLATFORM - windows unix -# - -#------------------------------------------------------------------------ -# TEA_PATH_TCLCONFIG -- -# -# Locate the tclConfig.sh file and perform a sanity check on -# the Tcl compile flags -# -# Arguments: -# none -# -# Results: -# -# Adds the following arguments to configure: -# --with-tcl=... -# -# Defines the following vars: -# TCL_BIN_DIR Full path to the directory containing -# the tclConfig.sh file -#------------------------------------------------------------------------ - -AC_DEFUN([TEA_PATH_TCLCONFIG], [ - dnl TEA specific: Make sure we are initialized - AC_REQUIRE([TEA_INIT]) - # - # Ok, lets find the tcl configuration - # First, look for one uninstalled. - # the alternative search directory is invoked by --with-tcl - # - - if test x"${no_tcl}" = x ; then - # we reset no_tcl in case something fails here - no_tcl=true - AC_ARG_WITH(tcl, - AC_HELP_STRING([--with-tcl], - [directory containing tcl configuration (tclConfig.sh)]), - with_tclconfig="${withval}") - AC_MSG_CHECKING([for Tcl configuration]) - AC_CACHE_VAL(ac_cv_c_tclconfig,[ - - # First check to see if --with-tcl was specified. - if test x"${with_tclconfig}" != x ; then - case "${with_tclconfig}" in - */tclConfig.sh ) - if test -f "${with_tclconfig}"; then - AC_MSG_WARN([--with-tcl argument should refer to directory containing tclConfig.sh, not to tclConfig.sh itself]) - with_tclconfig="`echo "${with_tclconfig}" | sed 's!/tclConfig\.sh$!!'`" - fi ;; - esac - if test -f "${with_tclconfig}/tclConfig.sh" ; then - ac_cv_c_tclconfig="`(cd "${with_tclconfig}"; pwd)`" - else - AC_MSG_ERROR([${with_tclconfig} directory doesn't contain tclConfig.sh]) - fi - fi - - # then check for a private Tcl installation - if test x"${ac_cv_c_tclconfig}" = x ; then - for i in \ - ../tcl \ - `ls -dr ../tcl[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \ - `ls -dr ../tcl[[8-9]].[[0-9]] 2>/dev/null` \ - `ls -dr ../tcl[[8-9]].[[0-9]]* 2>/dev/null` \ - ../../tcl \ - `ls -dr ../../tcl[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \ - `ls -dr ../../tcl[[8-9]].[[0-9]] 2>/dev/null` \ - `ls -dr ../../tcl[[8-9]].[[0-9]]* 2>/dev/null` \ - ../../../tcl \ - `ls -dr ../../../tcl[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \ - `ls -dr ../../../tcl[[8-9]].[[0-9]] 2>/dev/null` \ - `ls -dr ../../../tcl[[8-9]].[[0-9]]* 2>/dev/null` ; do - if test "${TEA_PLATFORM}" = "windows" \ - -a -f "$i/win/tclConfig.sh" ; then - ac_cv_c_tclconfig="`(cd $i/win; pwd)`" - break - fi - if test -f "$i/unix/tclConfig.sh" ; then - ac_cv_c_tclconfig="`(cd $i/unix; pwd)`" - break - fi - done - fi - - # on Darwin, check in Framework installation locations - if test "`uname -s`" = "Darwin" -a x"${ac_cv_c_tclconfig}" = x ; then - for i in `ls -d ~/Library/Frameworks 2>/dev/null` \ - `ls -d /Library/Frameworks 2>/dev/null` \ - `ls -d /Network/Library/Frameworks 2>/dev/null` \ - `ls -d /System/Library/Frameworks 2>/dev/null` \ - ; do - if test -f "$i/Tcl.framework/tclConfig.sh" ; then - ac_cv_c_tclconfig="`(cd $i/Tcl.framework; pwd)`" - break - fi - done - fi - - # TEA specific: on Windows, check in common installation locations - if test "${TEA_PLATFORM}" = "windows" \ - -a x"${ac_cv_c_tclconfig}" = x ; then - for i in `ls -d C:/Tcl/lib 2>/dev/null` \ - `ls -d C:/Progra~1/Tcl/lib 2>/dev/null` \ - ; do - if test -f "$i/tclConfig.sh" ; then - ac_cv_c_tclconfig="`(cd $i; pwd)`" - break - fi - done - fi - - # check in a few common install locations - if test x"${ac_cv_c_tclconfig}" = x ; then - for i in `ls -d ${libdir} 2>/dev/null` \ - `ls -d ${exec_prefix}/lib 2>/dev/null` \ - `ls -d ${prefix}/lib 2>/dev/null` \ - `ls -d /usr/local/lib 2>/dev/null` \ - `ls -d /usr/contrib/lib 2>/dev/null` \ - `ls -d /usr/lib 2>/dev/null` \ - ; do - if test -f "$i/tclConfig.sh" ; then - ac_cv_c_tclconfig="`(cd $i; pwd)`" - break - fi - done - fi - - # check in a few other private locations - if test x"${ac_cv_c_tclconfig}" = x ; then - for i in \ - ${srcdir}/../tcl \ - `ls -dr ${srcdir}/../tcl[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \ - `ls -dr ${srcdir}/../tcl[[8-9]].[[0-9]] 2>/dev/null` \ - `ls -dr ${srcdir}/../tcl[[8-9]].[[0-9]]* 2>/dev/null` ; do - if test "${TEA_PLATFORM}" = "windows" \ - -a -f "$i/win/tclConfig.sh" ; then - ac_cv_c_tclconfig="`(cd $i/win; pwd)`" - break - fi - if test -f "$i/unix/tclConfig.sh" ; then - ac_cv_c_tclconfig="`(cd $i/unix; pwd)`" - break - fi - done - fi - ]) - - if test x"${ac_cv_c_tclconfig}" = x ; then - TCL_BIN_DIR="# no Tcl configs found" - AC_MSG_ERROR([Can't find Tcl configuration definitions]) - else - no_tcl= - TCL_BIN_DIR="${ac_cv_c_tclconfig}" - AC_MSG_RESULT([found ${TCL_BIN_DIR}/tclConfig.sh]) - fi - fi -]) - -#------------------------------------------------------------------------ -# TEA_PATH_TKCONFIG -- -# -# Locate the tkConfig.sh file -# -# Arguments: -# none -# -# Results: -# -# Adds the following arguments to configure: -# --with-tk=... -# -# Defines the following vars: -# TK_BIN_DIR Full path to the directory containing -# the tkConfig.sh file -#------------------------------------------------------------------------ - -AC_DEFUN([TEA_PATH_TKCONFIG], [ - # - # Ok, lets find the tk configuration - # First, look for one uninstalled. - # the alternative search directory is invoked by --with-tk - # - - if test x"${no_tk}" = x ; then - # we reset no_tk in case something fails here - no_tk=true - AC_ARG_WITH(tk, - AC_HELP_STRING([--with-tk], - [directory containing tk configuration (tkConfig.sh)]), - with_tkconfig="${withval}") - AC_MSG_CHECKING([for Tk configuration]) - AC_CACHE_VAL(ac_cv_c_tkconfig,[ - - # First check to see if --with-tkconfig was specified. - if test x"${with_tkconfig}" != x ; then - case "${with_tkconfig}" in - */tkConfig.sh ) - if test -f "${with_tkconfig}"; then - AC_MSG_WARN([--with-tk argument should refer to directory containing tkConfig.sh, not to tkConfig.sh itself]) - with_tkconfig="`echo "${with_tkconfig}" | sed 's!/tkConfig\.sh$!!'`" - fi ;; - esac - if test -f "${with_tkconfig}/tkConfig.sh" ; then - ac_cv_c_tkconfig="`(cd "${with_tkconfig}"; pwd)`" - else - AC_MSG_ERROR([${with_tkconfig} directory doesn't contain tkConfig.sh]) - fi - fi - - # then check for a private Tk library - if test x"${ac_cv_c_tkconfig}" = x ; then - for i in \ - ../tk \ - `ls -dr ../tk[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \ - `ls -dr ../tk[[8-9]].[[0-9]] 2>/dev/null` \ - `ls -dr ../tk[[8-9]].[[0-9]]* 2>/dev/null` \ - ../../tk \ - `ls -dr ../../tk[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \ - `ls -dr ../../tk[[8-9]].[[0-9]] 2>/dev/null` \ - `ls -dr ../../tk[[8-9]].[[0-9]]* 2>/dev/null` \ - ../../../tk \ - `ls -dr ../../../tk[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \ - `ls -dr ../../../tk[[8-9]].[[0-9]] 2>/dev/null` \ - `ls -dr ../../../tk[[8-9]].[[0-9]]* 2>/dev/null` ; do - if test "${TEA_PLATFORM}" = "windows" \ - -a -f "$i/win/tkConfig.sh" ; then - ac_cv_c_tkconfig="`(cd $i/win; pwd)`" - break - fi - if test -f "$i/unix/tkConfig.sh" ; then - ac_cv_c_tkconfig="`(cd $i/unix; pwd)`" - break - fi - done - fi - - # on Darwin, check in Framework installation locations - if test "`uname -s`" = "Darwin" -a x"${ac_cv_c_tkconfig}" = x ; then - for i in `ls -d ~/Library/Frameworks 2>/dev/null` \ - `ls -d /Library/Frameworks 2>/dev/null` \ - `ls -d /Network/Library/Frameworks 2>/dev/null` \ - `ls -d /System/Library/Frameworks 2>/dev/null` \ - ; do - if test -f "$i/Tk.framework/tkConfig.sh" ; then - ac_cv_c_tkconfig="`(cd $i/Tk.framework; pwd)`" - break - fi - done - fi - - # check in a few common install locations - if test x"${ac_cv_c_tkconfig}" = x ; then - for i in `ls -d ${libdir} 2>/dev/null` \ - `ls -d ${exec_prefix}/lib 2>/dev/null` \ - `ls -d ${prefix}/lib 2>/dev/null` \ - `ls -d /usr/local/lib 2>/dev/null` \ - `ls -d /usr/contrib/lib 2>/dev/null` \ - `ls -d /usr/lib 2>/dev/null` \ - ; do - if test -f "$i/tkConfig.sh" ; then - ac_cv_c_tkconfig="`(cd $i; pwd)`" - break - fi - done - fi - - # TEA specific: on Windows, check in common installation locations - if test "${TEA_PLATFORM}" = "windows" \ - -a x"${ac_cv_c_tkconfig}" = x ; then - for i in `ls -d C:/Tcl/lib 2>/dev/null` \ - `ls -d C:/Progra~1/Tcl/lib 2>/dev/null` \ - ; do - if test -f "$i/tkConfig.sh" ; then - ac_cv_c_tkconfig="`(cd $i; pwd)`" - break - fi - done - fi - - # check in a few other private locations - if test x"${ac_cv_c_tkconfig}" = x ; then - for i in \ - ${srcdir}/../tk \ - `ls -dr ${srcdir}/../tk[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \ - `ls -dr ${srcdir}/../tk[[8-9]].[[0-9]] 2>/dev/null` \ - `ls -dr ${srcdir}/../tk[[8-9]].[[0-9]]* 2>/dev/null` ; do - if test "${TEA_PLATFORM}" = "windows" \ - -a -f "$i/win/tkConfig.sh" ; then - ac_cv_c_tkconfig="`(cd $i/win; pwd)`" - break - fi - if test -f "$i/unix/tkConfig.sh" ; then - ac_cv_c_tkconfig="`(cd $i/unix; pwd)`" - break - fi - done - fi - ]) - - if test x"${ac_cv_c_tkconfig}" = x ; then - TK_BIN_DIR="# no Tk configs found" - AC_MSG_ERROR([Can't find Tk configuration definitions]) - else - no_tk= - TK_BIN_DIR="${ac_cv_c_tkconfig}" - AC_MSG_RESULT([found ${TK_BIN_DIR}/tkConfig.sh]) - fi - fi -]) - -#------------------------------------------------------------------------ -# TEA_LOAD_TCLCONFIG -- -# -# Load the tclConfig.sh file -# -# Arguments: -# -# Requires the following vars to be set: -# TCL_BIN_DIR -# -# Results: -# -# Subst the following vars: -# TCL_BIN_DIR -# TCL_SRC_DIR -# TCL_LIB_FILE -# -#------------------------------------------------------------------------ - -AC_DEFUN([TEA_LOAD_TCLCONFIG], [ - AC_MSG_CHECKING([for existence of ${TCL_BIN_DIR}/tclConfig.sh]) - - if test -f "${TCL_BIN_DIR}/tclConfig.sh" ; then - AC_MSG_RESULT([loading]) - . "${TCL_BIN_DIR}/tclConfig.sh" - else - AC_MSG_RESULT([could not find ${TCL_BIN_DIR}/tclConfig.sh]) - fi - - # eval is required to do the TCL_DBGX substitution - eval "TCL_LIB_FILE=\"${TCL_LIB_FILE}\"" - eval "TCL_STUB_LIB_FILE=\"${TCL_STUB_LIB_FILE}\"" - - # If the TCL_BIN_DIR is the build directory (not the install directory), - # then set the common variable name to the value of the build variables. - # For example, the variable TCL_LIB_SPEC will be set to the value - # of TCL_BUILD_LIB_SPEC. An extension should make use of TCL_LIB_SPEC - # instead of TCL_BUILD_LIB_SPEC since it will work with both an - # installed and uninstalled version of Tcl. - if test -f "${TCL_BIN_DIR}/Makefile" ; then - TCL_LIB_SPEC="${TCL_BUILD_LIB_SPEC}" - TCL_STUB_LIB_SPEC="${TCL_BUILD_STUB_LIB_SPEC}" - TCL_STUB_LIB_PATH="${TCL_BUILD_STUB_LIB_PATH}" - elif test "`uname -s`" = "Darwin"; then - # If Tcl was built as a framework, attempt to use the libraries - # from the framework at the given location so that linking works - # against Tcl.framework installed in an arbitrary location. - case ${TCL_DEFS} in - *TCL_FRAMEWORK*) - if test -f "${TCL_BIN_DIR}/${TCL_LIB_FILE}"; then - for i in "`cd "${TCL_BIN_DIR}"; pwd`" \ - "`cd "${TCL_BIN_DIR}"/../..; pwd`"; do - if test "`basename "$i"`" = "${TCL_LIB_FILE}.framework"; then - TCL_LIB_SPEC="-F`dirname "$i" | sed -e 's/ /\\\\ /g'` -framework ${TCL_LIB_FILE}" - break - fi - done - fi - if test -f "${TCL_BIN_DIR}/${TCL_STUB_LIB_FILE}"; then - TCL_STUB_LIB_SPEC="-L`echo "${TCL_BIN_DIR}" | sed -e 's/ /\\\\ /g'` ${TCL_STUB_LIB_FLAG}" - TCL_STUB_LIB_PATH="${TCL_BIN_DIR}/${TCL_STUB_LIB_FILE}" - fi - ;; - esac - fi - - # eval is required to do the TCL_DBGX substitution - eval "TCL_LIB_FLAG=\"${TCL_LIB_FLAG}\"" - eval "TCL_LIB_SPEC=\"${TCL_LIB_SPEC}\"" - eval "TCL_STUB_LIB_FLAG=\"${TCL_STUB_LIB_FLAG}\"" - eval "TCL_STUB_LIB_SPEC=\"${TCL_STUB_LIB_SPEC}\"" - - AC_SUBST(TCL_VERSION) - AC_SUBST(TCL_PATCH_LEVEL) - AC_SUBST(TCL_BIN_DIR) - AC_SUBST(TCL_SRC_DIR) - - AC_SUBST(TCL_LIB_FILE) - AC_SUBST(TCL_LIB_FLAG) - AC_SUBST(TCL_LIB_SPEC) - - AC_SUBST(TCL_STUB_LIB_FILE) - AC_SUBST(TCL_STUB_LIB_FLAG) - AC_SUBST(TCL_STUB_LIB_SPEC) - - case "`uname -s`" in - *CYGWIN_*) - AC_MSG_CHECKING([for cygwin variant]) - case ${TCL_EXTRA_CFLAGS} in - *-mwin32*|*-mno-cygwin*) - TEA_PLATFORM="windows" - CFLAGS="$CFLAGS -mwin32" - AC_MSG_RESULT([win32]) - ;; - *) - TEA_PLATFORM="unix" - AC_MSG_RESULT([unix]) - ;; - esac - EXEEXT=".exe" - ;; - *) - ;; - esac - - # TEA specific: - AC_SUBST(TCL_LIBS) - AC_SUBST(TCL_DEFS) - AC_SUBST(TCL_EXTRA_CFLAGS) - AC_SUBST(TCL_LD_FLAGS) - AC_SUBST(TCL_SHLIB_LD_LIBS) -]) - -#------------------------------------------------------------------------ -# TEA_LOAD_TKCONFIG -- -# -# Load the tkConfig.sh file -# -# Arguments: -# -# Requires the following vars to be set: -# TK_BIN_DIR -# -# Results: -# -# Sets the following vars that should be in tkConfig.sh: -# TK_BIN_DIR -#------------------------------------------------------------------------ - -AC_DEFUN([TEA_LOAD_TKCONFIG], [ - AC_MSG_CHECKING([for existence of ${TK_BIN_DIR}/tkConfig.sh]) - - if test -f "${TK_BIN_DIR}/tkConfig.sh" ; then - AC_MSG_RESULT([loading]) - . "${TK_BIN_DIR}/tkConfig.sh" - else - AC_MSG_RESULT([could not find ${TK_BIN_DIR}/tkConfig.sh]) - fi - - # eval is required to do the TK_DBGX substitution - eval "TK_LIB_FILE=\"${TK_LIB_FILE}\"" - eval "TK_STUB_LIB_FILE=\"${TK_STUB_LIB_FILE}\"" - - # If the TK_BIN_DIR is the build directory (not the install directory), - # then set the common variable name to the value of the build variables. - # For example, the variable TK_LIB_SPEC will be set to the value - # of TK_BUILD_LIB_SPEC. An extension should make use of TK_LIB_SPEC - # instead of TK_BUILD_LIB_SPEC since it will work with both an - # installed and uninstalled version of Tcl. - if test -f "${TK_BIN_DIR}/Makefile" ; then - TK_LIB_SPEC="${TK_BUILD_LIB_SPEC}" - TK_STUB_LIB_SPEC="${TK_BUILD_STUB_LIB_SPEC}" - TK_STUB_LIB_PATH="${TK_BUILD_STUB_LIB_PATH}" - elif test "`uname -s`" = "Darwin"; then - # If Tk was built as a framework, attempt to use the libraries - # from the framework at the given location so that linking works - # against Tk.framework installed in an arbitrary location. - case ${TK_DEFS} in - *TK_FRAMEWORK*) - if test -f "${TK_BIN_DIR}/${TK_LIB_FILE}"; then - for i in "`cd "${TK_BIN_DIR}"; pwd`" \ - "`cd "${TK_BIN_DIR}"/../..; pwd`"; do - if test "`basename "$i"`" = "${TK_LIB_FILE}.framework"; then - TK_LIB_SPEC="-F`dirname "$i" | sed -e 's/ /\\\\ /g'` -framework ${TK_LIB_FILE}" - break - fi - done - fi - if test -f "${TK_BIN_DIR}/${TK_STUB_LIB_FILE}"; then - TK_STUB_LIB_SPEC="-L` echo "${TK_BIN_DIR}" | sed -e 's/ /\\\\ /g'` ${TK_STUB_LIB_FLAG}" - TK_STUB_LIB_PATH="${TK_BIN_DIR}/${TK_STUB_LIB_FILE}" - fi - ;; - esac - fi - - # eval is required to do the TK_DBGX substitution - eval "TK_LIB_FLAG=\"${TK_LIB_FLAG}\"" - eval "TK_LIB_SPEC=\"${TK_LIB_SPEC}\"" - eval "TK_STUB_LIB_FLAG=\"${TK_STUB_LIB_FLAG}\"" - eval "TK_STUB_LIB_SPEC=\"${TK_STUB_LIB_SPEC}\"" - - # TEA specific: Ensure windowingsystem is defined - if test "${TEA_PLATFORM}" = "unix" ; then - case ${TK_DEFS} in - *MAC_OSX_TK*) - AC_DEFINE(MAC_OSX_TK, 1, [Are we building against Mac OS X TkAqua?]) - TEA_WINDOWINGSYSTEM="aqua" - ;; - *) - TEA_WINDOWINGSYSTEM="x11" - ;; - esac - elif test "${TEA_PLATFORM}" = "windows" ; then - TEA_WINDOWINGSYSTEM="win32" - fi - - AC_SUBST(TK_VERSION) - AC_SUBST(TK_BIN_DIR) - AC_SUBST(TK_SRC_DIR) - - AC_SUBST(TK_LIB_FILE) - AC_SUBST(TK_LIB_FLAG) - AC_SUBST(TK_LIB_SPEC) - - AC_SUBST(TK_STUB_LIB_FILE) - AC_SUBST(TK_STUB_LIB_FLAG) - AC_SUBST(TK_STUB_LIB_SPEC) - - # TEA specific: - AC_SUBST(TK_LIBS) - AC_SUBST(TK_XINCLUDES) -]) - -#------------------------------------------------------------------------ -# TEA_PROG_TCLSH -# Determine the fully qualified path name of the tclsh executable -# in the Tcl build directory or the tclsh installed in a bin -# directory. This macro will correctly determine the name -# of the tclsh executable even if tclsh has not yet been -# built in the build directory. The tclsh found is always -# associated with a tclConfig.sh file. This tclsh should be used -# only for running extension test cases. It should never be -# or generation of files (like pkgIndex.tcl) at build time. -# -# Arguments -# none -# -# Results -# Subst's the following values: -# TCLSH_PROG -#------------------------------------------------------------------------ - -AC_DEFUN([TEA_PROG_TCLSH], [ - AC_MSG_CHECKING([for tclsh]) - if test -f "${TCL_BIN_DIR}/Makefile" ; then - # tclConfig.sh is in Tcl build directory - if test "${TEA_PLATFORM}" = "windows"; then - TCLSH_PROG="${TCL_BIN_DIR}/tclsh${TCL_MAJOR_VERSION}${TCL_MINOR_VERSION}${TCL_DBGX}${EXEEXT}" - else - TCLSH_PROG="${TCL_BIN_DIR}/tclsh" - fi - else - # tclConfig.sh is in install location - if test "${TEA_PLATFORM}" = "windows"; then - TCLSH_PROG="tclsh${TCL_MAJOR_VERSION}${TCL_MINOR_VERSION}${TCL_DBGX}${EXEEXT}" - else - TCLSH_PROG="tclsh${TCL_MAJOR_VERSION}.${TCL_MINOR_VERSION}${TCL_DBGX}" - fi - list="`ls -d ${TCL_BIN_DIR}/../bin 2>/dev/null` \ - `ls -d ${TCL_BIN_DIR}/.. 2>/dev/null` \ - `ls -d ${TCL_PREFIX}/bin 2>/dev/null`" - for i in $list ; do - if test -f "$i/${TCLSH_PROG}" ; then - REAL_TCL_BIN_DIR="`cd "$i"; pwd`/" - break - fi - done - TCLSH_PROG="${REAL_TCL_BIN_DIR}${TCLSH_PROG}" - fi - AC_MSG_RESULT([${TCLSH_PROG}]) - AC_SUBST(TCLSH_PROG) -]) - -#------------------------------------------------------------------------ -# TEA_PROG_WISH -# Determine the fully qualified path name of the wish executable -# in the Tk build directory or the wish installed in a bin -# directory. This macro will correctly determine the name -# of the wish executable even if wish has not yet been -# built in the build directory. The wish found is always -# associated with a tkConfig.sh file. This wish should be used -# only for running extension test cases. It should never be -# or generation of files (like pkgIndex.tcl) at build time. -# -# Arguments -# none -# -# Results -# Subst's the following values: -# WISH_PROG -#------------------------------------------------------------------------ - -AC_DEFUN([TEA_PROG_WISH], [ - AC_MSG_CHECKING([for wish]) - if test -f "${TK_BIN_DIR}/Makefile" ; then - # tkConfig.sh is in Tk build directory - if test "${TEA_PLATFORM}" = "windows"; then - WISH_PROG="${TK_BIN_DIR}/wish${TK_MAJOR_VERSION}${TK_MINOR_VERSION}${TK_DBGX}${EXEEXT}" - else - WISH_PROG="${TK_BIN_DIR}/wish" - fi - else - # tkConfig.sh is in install location - if test "${TEA_PLATFORM}" = "windows"; then - WISH_PROG="wish${TK_MAJOR_VERSION}${TK_MINOR_VERSION}${TK_DBGX}${EXEEXT}" - else - WISH_PROG="wish${TK_MAJOR_VERSION}.${TK_MINOR_VERSION}${TK_DBGX}" - fi - list="`ls -d ${TK_BIN_DIR}/../bin 2>/dev/null` \ - `ls -d ${TK_BIN_DIR}/.. 2>/dev/null` \ - `ls -d ${TK_PREFIX}/bin 2>/dev/null`" - for i in $list ; do - if test -f "$i/${WISH_PROG}" ; then - REAL_TK_BIN_DIR="`cd "$i"; pwd`/" - break - fi - done - WISH_PROG="${REAL_TK_BIN_DIR}${WISH_PROG}" - fi - AC_MSG_RESULT([${WISH_PROG}]) - AC_SUBST(WISH_PROG) -]) - -#------------------------------------------------------------------------ -# TEA_ENABLE_SHARED -- -# -# Allows the building of shared libraries -# -# Arguments: -# none -# -# Results: -# -# Adds the following arguments to configure: -# --enable-shared=yes|no -# -# Defines the following vars: -# STATIC_BUILD Used for building import/export libraries -# on Windows. -# -# Sets the following vars: -# SHARED_BUILD Value of 1 or 0 -#------------------------------------------------------------------------ - -AC_DEFUN([TEA_ENABLE_SHARED], [ - AC_MSG_CHECKING([how to build libraries]) - AC_ARG_ENABLE(shared, - AC_HELP_STRING([--enable-shared], - [build and link with shared libraries (default: on)]), - [tcl_ok=$enableval], [tcl_ok=yes]) - - if test "${enable_shared+set}" = set; then - enableval="$enable_shared" - tcl_ok=$enableval - else - tcl_ok=yes - fi - - if test "$tcl_ok" = "yes" ; then - AC_MSG_RESULT([shared]) - SHARED_BUILD=1 - else - AC_MSG_RESULT([static]) - SHARED_BUILD=0 - AC_DEFINE(STATIC_BUILD, 1, [Is this a static build?]) - fi - AC_SUBST(SHARED_BUILD) -]) - -#------------------------------------------------------------------------ -# TEA_ENABLE_THREADS -- -# -# Specify if thread support should be enabled. If "yes" is specified -# as an arg (optional), threads are enabled by default, "no" means -# threads are disabled. "yes" is the default. -# -# TCL_THREADS is checked so that if you are compiling an extension -# against a threaded core, your extension must be compiled threaded -# as well. -# -# Note that it is legal to have a thread enabled extension run in a -# threaded or non-threaded Tcl core, but a non-threaded extension may -# only run in a non-threaded Tcl core. -# -# Arguments: -# none -# -# Results: -# -# Adds the following arguments to configure: -# --enable-threads -# -# Sets the following vars: -# THREADS_LIBS Thread library(s) -# -# Defines the following vars: -# TCL_THREADS -# _REENTRANT -# _THREAD_SAFE -# -#------------------------------------------------------------------------ - -AC_DEFUN([TEA_ENABLE_THREADS], [ - AC_ARG_ENABLE(threads, - AC_HELP_STRING([--enable-threads], - [build with threads]), - [tcl_ok=$enableval], [tcl_ok=yes]) - - if test "${enable_threads+set}" = set; then - enableval="$enable_threads" - tcl_ok=$enableval - else - tcl_ok=yes - fi - - if test "$tcl_ok" = "yes" -o "${TCL_THREADS}" = 1; then - TCL_THREADS=1 - - if test "${TEA_PLATFORM}" != "windows" ; then - # We are always OK on Windows, so check what this platform wants: - - # USE_THREAD_ALLOC tells us to try the special thread-based - # allocator that significantly reduces lock contention - AC_DEFINE(USE_THREAD_ALLOC, 1, - [Do we want to use the threaded memory allocator?]) - AC_DEFINE(_REENTRANT, 1, [Do we want the reentrant OS API?]) - if test "`uname -s`" = "SunOS" ; then - AC_DEFINE(_POSIX_PTHREAD_SEMANTICS, 1, - [Do we really want to follow the standard? Yes we do!]) - fi - AC_DEFINE(_THREAD_SAFE, 1, [Do we want the thread-safe OS API?]) - AC_CHECK_LIB(pthread,pthread_mutex_init,tcl_ok=yes,tcl_ok=no) - if test "$tcl_ok" = "no"; then - # Check a little harder for __pthread_mutex_init in the same - # library, as some systems hide it there until pthread.h is - # defined. We could alternatively do an AC_TRY_COMPILE with - # pthread.h, but that will work with libpthread really doesn't - # exist, like AIX 4.2. [Bug: 4359] - AC_CHECK_LIB(pthread, __pthread_mutex_init, - tcl_ok=yes, tcl_ok=no) - fi - - if test "$tcl_ok" = "yes"; then - # The space is needed - THREADS_LIBS=" -lpthread" - else - AC_CHECK_LIB(pthreads, pthread_mutex_init, - tcl_ok=yes, tcl_ok=no) - if test "$tcl_ok" = "yes"; then - # The space is needed - THREADS_LIBS=" -lpthreads" - else - AC_CHECK_LIB(c, pthread_mutex_init, - tcl_ok=yes, tcl_ok=no) - if test "$tcl_ok" = "no"; then - AC_CHECK_LIB(c_r, pthread_mutex_init, - tcl_ok=yes, tcl_ok=no) - if test "$tcl_ok" = "yes"; then - # The space is needed - THREADS_LIBS=" -pthread" - else - TCL_THREADS=0 - AC_MSG_WARN([Do not know how to find pthread lib on your system - thread support disabled]) - fi - fi - fi - fi - fi - else - TCL_THREADS=0 - fi - # Do checking message here to not mess up interleaved configure output - AC_MSG_CHECKING([for building with threads]) - if test "${TCL_THREADS}" = 1; then - AC_DEFINE(TCL_THREADS, 1, [Are we building with threads enabled?]) - AC_MSG_RESULT([yes (default)]) - else - AC_MSG_RESULT([no]) - fi - # TCL_THREADS sanity checking. See if our request for building with - # threads is the same as the way Tcl was built. If not, warn the user. - case ${TCL_DEFS} in - *THREADS=1*) - if test "${TCL_THREADS}" = "0"; then - AC_MSG_WARN([ - Building ${PACKAGE_NAME} without threads enabled, but building against Tcl - that IS thread-enabled. It is recommended to use --enable-threads.]) - fi - ;; - *) - if test "${TCL_THREADS}" = "1"; then - AC_MSG_WARN([ - --enable-threads requested, but building against a Tcl that is NOT - thread-enabled. This is an OK configuration that will also run in - a thread-enabled core.]) - fi - ;; - esac - AC_SUBST(TCL_THREADS) -]) - -#------------------------------------------------------------------------ -# TEA_ENABLE_SYMBOLS -- -# -# Specify if debugging symbols should be used. -# Memory (TCL_MEM_DEBUG) debugging can also be enabled. -# -# Arguments: -# none -# -# TEA varies from core Tcl in that C|LDFLAGS_DEFAULT receives -# the value of C|LDFLAGS_OPTIMIZE|DEBUG already substituted. -# Requires the following vars to be set in the Makefile: -# CFLAGS_DEFAULT -# LDFLAGS_DEFAULT -# -# Results: -# -# Adds the following arguments to configure: -# --enable-symbols -# -# Defines the following vars: -# CFLAGS_DEFAULT Sets to $(CFLAGS_DEBUG) if true -# Sets to $(CFLAGS_OPTIMIZE) if false -# LDFLAGS_DEFAULT Sets to $(LDFLAGS_DEBUG) if true -# Sets to $(LDFLAGS_OPTIMIZE) if false -# DBGX Formerly used as debug library extension; -# always blank now. -# -#------------------------------------------------------------------------ - -AC_DEFUN([TEA_ENABLE_SYMBOLS], [ - dnl TEA specific: Make sure we are initialized - AC_REQUIRE([TEA_CONFIG_CFLAGS]) - AC_MSG_CHECKING([for build with symbols]) - AC_ARG_ENABLE(symbols, - AC_HELP_STRING([--enable-symbols], - [build with debugging symbols (default: off)]), - [tcl_ok=$enableval], [tcl_ok=no]) - DBGX="" - if test "$tcl_ok" = "no"; then - CFLAGS_DEFAULT="${CFLAGS_OPTIMIZE}" - LDFLAGS_DEFAULT="${LDFLAGS_OPTIMIZE}" - AC_MSG_RESULT([no]) - else - CFLAGS_DEFAULT="${CFLAGS_DEBUG}" - LDFLAGS_DEFAULT="${LDFLAGS_DEBUG}" - if test "$tcl_ok" = "yes"; then - AC_MSG_RESULT([yes (standard debugging)]) - fi - fi - # TEA specific: - if test "${TEA_PLATFORM}" != "windows" ; then - LDFLAGS_DEFAULT="${LDFLAGS}" - fi - AC_SUBST(CFLAGS_DEFAULT) - AC_SUBST(LDFLAGS_DEFAULT) - AC_SUBST(TCL_DBGX) - - if test "$tcl_ok" = "mem" -o "$tcl_ok" = "all"; then - AC_DEFINE(TCL_MEM_DEBUG, 1, [Is memory debugging enabled?]) - fi - - if test "$tcl_ok" != "yes" -a "$tcl_ok" != "no"; then - if test "$tcl_ok" = "all"; then - AC_MSG_RESULT([enabled symbols mem debugging]) - else - AC_MSG_RESULT([enabled $tcl_ok debugging]) - fi - fi -]) - -#------------------------------------------------------------------------ -# TEA_ENABLE_LANGINFO -- -# -# Allows use of modern nl_langinfo check for better l10n. -# This is only relevant for Unix. -# -# Arguments: -# none -# -# Results: -# -# Adds the following arguments to configure: -# --enable-langinfo=yes|no (default is yes) -# -# Defines the following vars: -# HAVE_LANGINFO Triggers use of nl_langinfo if defined. -# -#------------------------------------------------------------------------ - -AC_DEFUN([TEA_ENABLE_LANGINFO], [ - AC_ARG_ENABLE(langinfo, - AC_HELP_STRING([--enable-langinfo], - [use nl_langinfo if possible to determine encoding at startup, otherwise use old heuristic (default: on)]), - [langinfo_ok=$enableval], [langinfo_ok=yes]) - - HAVE_LANGINFO=0 - if test "$langinfo_ok" = "yes"; then - AC_CHECK_HEADER(langinfo.h,[langinfo_ok=yes],[langinfo_ok=no]) - fi - AC_MSG_CHECKING([whether to use nl_langinfo]) - if test "$langinfo_ok" = "yes"; then - AC_CACHE_VAL(tcl_cv_langinfo_h, [ - AC_TRY_COMPILE([#include ], [nl_langinfo(CODESET);], - [tcl_cv_langinfo_h=yes],[tcl_cv_langinfo_h=no])]) - AC_MSG_RESULT([$tcl_cv_langinfo_h]) - if test $tcl_cv_langinfo_h = yes; then - AC_DEFINE(HAVE_LANGINFO, 1, [Do we have nl_langinfo()?]) - fi - else - AC_MSG_RESULT([$langinfo_ok]) - fi -]) - -#-------------------------------------------------------------------- -# TEA_CONFIG_SYSTEM -# -# Determine what the system is (some things cannot be easily checked -# on a feature-driven basis, alas). This can usually be done via the -# "uname" command, but there are a few systems, like Next, where -# this doesn't work. -# -# Arguments: -# none -# -# Results: -# Defines the following var: -# -# system - System/platform/version identification code. -# -#-------------------------------------------------------------------- - -AC_DEFUN([TEA_CONFIG_SYSTEM], [ - AC_CACHE_CHECK([system version], tcl_cv_sys_version, [ - # TEA specific: - if test "${TEA_PLATFORM}" = "windows" ; then - tcl_cv_sys_version=windows - elif test -f /usr/lib/NextStep/software_version; then - tcl_cv_sys_version=NEXTSTEP-`awk '/3/,/3/' /usr/lib/NextStep/software_version` - else - tcl_cv_sys_version=`uname -s`-`uname -r` - if test "$?" -ne 0 ; then - AC_MSG_WARN([can't find uname command]) - tcl_cv_sys_version=unknown - else - # Special check for weird MP-RAS system (uname returns weird - # results, and the version is kept in special file). - - if test -r /etc/.relid -a "X`uname -n`" = "X`uname -s`" ; then - tcl_cv_sys_version=MP-RAS-`awk '{print $[3]}' /etc/.relid` - fi - if test "`uname -s`" = "AIX" ; then - tcl_cv_sys_version=AIX-`uname -v`.`uname -r` - fi - fi - fi - ]) - system=$tcl_cv_sys_version -]) - -#-------------------------------------------------------------------- -# TEA_CONFIG_CFLAGS -# -# Try to determine the proper flags to pass to the compiler -# for building shared libraries and other such nonsense. -# -# Arguments: -# none -# -# Results: -# -# Defines and substitutes the following vars: -# -# DL_OBJS - Name of the object file that implements dynamic -# loading for Tcl on this system. -# DL_LIBS - Library file(s) to include in tclsh and other base -# applications in order for the "load" command to work. -# LDFLAGS - Flags to pass to the compiler when linking object -# files into an executable application binary such -# as tclsh. -# LD_SEARCH_FLAGS-Flags to pass to ld, such as "-R /usr/local/tcl/lib", -# that tell the run-time dynamic linker where to look -# for shared libraries such as libtcl.so. Depends on -# the variable LIB_RUNTIME_DIR in the Makefile. Could -# be the same as CC_SEARCH_FLAGS if ${CC} is used to link. -# CC_SEARCH_FLAGS-Flags to pass to ${CC}, such as "-Wl,-rpath,/usr/local/tcl/lib", -# that tell the run-time dynamic linker where to look -# for shared libraries such as libtcl.so. Depends on -# the variable LIB_RUNTIME_DIR in the Makefile. -# SHLIB_CFLAGS - Flags to pass to cc when compiling the components -# of a shared library (may request position-independent -# code, among other things). -# SHLIB_LD - Base command to use for combining object files -# into a shared library. -# SHLIB_LD_LIBS - Dependent libraries for the linker to scan when -# creating shared libraries. This symbol typically -# goes at the end of the "ld" commands that build -# shared libraries. The value of the symbol is -# "${LIBS}" if all of the dependent libraries should -# be specified when creating a shared library. If -# dependent libraries should not be specified (as on -# SunOS 4.x, where they cause the link to fail, or in -# general if Tcl and Tk aren't themselves shared -# libraries), then this symbol has an empty string -# as its value. -# SHLIB_SUFFIX - Suffix to use for the names of dynamically loadable -# extensions. An empty string means we don't know how -# to use shared libraries on this platform. -# LIB_SUFFIX - Specifies everything that comes after the "libfoo" -# in a static or shared library name, using the $VERSION variable -# to put the version in the right place. This is used -# by platforms that need non-standard library names. -# Examples: ${VERSION}.so.1.1 on NetBSD, since it needs -# to have a version after the .so, and ${VERSION}.a -# on AIX, since a shared library needs to have -# a .a extension whereas shared objects for loadable -# extensions have a .so extension. Defaults to -# ${VERSION}${SHLIB_SUFFIX}. -# CFLAGS_DEBUG - -# Flags used when running the compiler in debug mode -# CFLAGS_OPTIMIZE - -# Flags used when running the compiler in optimize mode -# CFLAGS - Additional CFLAGS added as necessary (usually 64-bit) -# -#-------------------------------------------------------------------- - -AC_DEFUN([TEA_CONFIG_CFLAGS], [ - dnl TEA specific: Make sure we are initialized - AC_REQUIRE([TEA_INIT]) - - # Step 0.a: Enable 64 bit support? - - AC_MSG_CHECKING([if 64bit support is requested]) - AC_ARG_ENABLE(64bit, - AC_HELP_STRING([--enable-64bit], - [enable 64bit support (default: off)]), - [do64bit=$enableval], [do64bit=no]) - AC_MSG_RESULT([$do64bit]) - - # Step 0.b: Enable Solaris 64 bit VIS support? - - AC_MSG_CHECKING([if 64bit Sparc VIS support is requested]) - AC_ARG_ENABLE(64bit-vis, - AC_HELP_STRING([--enable-64bit-vis], - [enable 64bit Sparc VIS support (default: off)]), - [do64bitVIS=$enableval], [do64bitVIS=no]) - AC_MSG_RESULT([$do64bitVIS]) - # Force 64bit on with VIS - AS_IF([test "$do64bitVIS" = "yes"], [do64bit=yes]) - - # Step 0.c: Check if visibility support is available. Do this here so - # that platform specific alternatives can be used below if this fails. - - AC_CACHE_CHECK([if compiler supports visibility "hidden"], - tcl_cv_cc_visibility_hidden, [ - hold_cflags=$CFLAGS; CFLAGS="$CFLAGS -Werror" - AC_TRY_LINK([ - extern __attribute__((__visibility__("hidden"))) void f(void); - void f(void) {}], [f();], tcl_cv_cc_visibility_hidden=yes, - tcl_cv_cc_visibility_hidden=no) - CFLAGS=$hold_cflags]) - AS_IF([test $tcl_cv_cc_visibility_hidden = yes], [ - AC_DEFINE(MODULE_SCOPE, - [extern __attribute__((__visibility__("hidden")))], - [Compiler support for module scope symbols]) - ]) - - # Step 0.d: Disable -rpath support? - - AC_MSG_CHECKING([if rpath support is requested]) - AC_ARG_ENABLE(rpath, - AC_HELP_STRING([--disable-rpath], - [disable rpath support (default: on)]), - [doRpath=$enableval], [doRpath=yes]) - AC_MSG_RESULT([$doRpath]) - - # TEA specific: Cross-compiling options for Windows/CE builds? - - AS_IF([test "${TEA_PLATFORM}" = windows], [ - AC_MSG_CHECKING([if Windows/CE build is requested]) - AC_ARG_ENABLE(wince, - AC_HELP_STRING([--enable-wince], - [enable Win/CE support (where applicable)]), - [doWince=$enableval], [doWince=no]) - AC_MSG_RESULT([$doWince]) - ]) - - # Step 1: set the variable "system" to hold the name and version number - # for the system. - - TEA_CONFIG_SYSTEM - - # Step 2: check for existence of -ldl library. This is needed because - # Linux can use either -ldl or -ldld for dynamic loading. - - AC_CHECK_LIB(dl, dlopen, have_dl=yes, have_dl=no) - - # Require ranlib early so we can override it in special cases below. - - AC_REQUIRE([AC_PROG_RANLIB]) - - # Step 3: set configuration options based on system name and version. - # This is similar to Tcl's unix/tcl.m4 except that we've added a - # "windows" case. - - do64bit_ok=no - LDFLAGS_ORIG="$LDFLAGS" - # When ld needs options to work in 64-bit mode, put them in - # LDFLAGS_ARCH so they eventually end up in LDFLAGS even if [load] - # is disabled by the user. [Bug 1016796] - LDFLAGS_ARCH="" - UNSHARED_LIB_SUFFIX="" - # TEA specific: use PACKAGE_VERSION instead of VERSION - TCL_TRIM_DOTS='`echo ${PACKAGE_VERSION} | tr -d .`' - ECHO_VERSION='`echo ${PACKAGE_VERSION}`' - TCL_LIB_VERSIONS_OK=ok - CFLAGS_DEBUG=-g - CFLAGS_OPTIMIZE=-O - AS_IF([test "$GCC" = yes], [ - # TEA specific: - CFLAGS_OPTIMIZE=-O2 - CFLAGS_WARNING="-Wall" - ], [CFLAGS_WARNING=""]) -dnl FIXME: Replace AC_CHECK_PROG with AC_CHECK_TOOL once cross compiling is fixed. -dnl AC_CHECK_TOOL(AR, ar) - AC_CHECK_PROG(AR, ar, ar) - STLIB_LD='${AR} cr' - LD_LIBRARY_PATH_VAR="LD_LIBRARY_PATH" - AS_IF([test "x$SHLIB_VERSION" = x],[SHLIB_VERSION="1.0"]) - case $system in - # TEA specific: - windows) - # This is a 2-stage check to make sure we have the 64-bit SDK - # We have to know where the SDK is installed. - # This magic is based on MS Platform SDK for Win2003 SP1 - hobbs - # MACHINE is IX86 for LINK, but this is used by the manifest, - # which requires x86|amd64|ia64. - MACHINE="X86" - if test "$do64bit" != "no" ; then - if test "x${MSSDK}x" = "xx" ; then - MSSDK="C:/Progra~1/Microsoft Platform SDK" - fi - MSSDK=`echo "$MSSDK" | sed -e 's!\\\!/!g'` - PATH64="" - case "$do64bit" in - amd64|x64|yes) - MACHINE="AMD64" ; # default to AMD64 64-bit build - PATH64="${MSSDK}/Bin/Win64/x86/AMD64" - ;; - ia64) - MACHINE="IA64" - PATH64="${MSSDK}/Bin/Win64" - ;; - esac - if test ! -d "${PATH64}" ; then - AC_MSG_WARN([Could not find 64-bit $MACHINE SDK to enable 64bit mode]) - AC_MSG_WARN([Ensure latest Platform SDK is installed]) - do64bit="no" - else - AC_MSG_RESULT([ Using 64-bit $MACHINE mode]) - do64bit_ok="yes" - fi - fi - - if test "$doWince" != "no" ; then - if test "$do64bit" != "no" ; then - AC_MSG_ERROR([Windows/CE and 64-bit builds incompatible]) - fi - if test "$GCC" = "yes" ; then - AC_MSG_ERROR([Windows/CE and GCC builds incompatible]) - fi - TEA_PATH_CELIB - # Set defaults for common evc4/PPC2003 setup - # Currently Tcl requires 300+, possibly 420+ for sockets - CEVERSION=420; # could be 211 300 301 400 420 ... - TARGETCPU=ARMV4; # could be ARMV4 ARM MIPS SH3 X86 ... - ARCH=ARM; # could be ARM MIPS X86EM ... - PLATFORM="Pocket PC 2003"; # or "Pocket PC 2002" - if test "$doWince" != "yes"; then - # If !yes then the user specified something - # Reset ARCH to allow user to skip specifying it - ARCH= - eval `echo $doWince | awk -F, '{ \ - if (length([$]1)) { printf "CEVERSION=\"%s\"\n", [$]1; \ - if ([$]1 < 400) { printf "PLATFORM=\"Pocket PC 2002\"\n" } }; \ - if (length([$]2)) { printf "TARGETCPU=\"%s\"\n", toupper([$]2) }; \ - if (length([$]3)) { printf "ARCH=\"%s\"\n", toupper([$]3) }; \ - if (length([$]4)) { printf "PLATFORM=\"%s\"\n", [$]4 }; \ - }'` - if test "x${ARCH}" = "x" ; then - ARCH=$TARGETCPU; - fi - fi - OSVERSION=WCE$CEVERSION; - if test "x${WCEROOT}" = "x" ; then - WCEROOT="C:/Program Files/Microsoft eMbedded C++ 4.0" - if test ! -d "${WCEROOT}" ; then - WCEROOT="C:/Program Files/Microsoft eMbedded Tools" - fi - fi - if test "x${SDKROOT}" = "x" ; then - SDKROOT="C:/Program Files/Windows CE Tools" - if test ! -d "${SDKROOT}" ; then - SDKROOT="C:/Windows CE Tools" - fi - fi - WCEROOT=`echo "$WCEROOT" | sed -e 's!\\\!/!g'` - SDKROOT=`echo "$SDKROOT" | sed -e 's!\\\!/!g'` - if test ! -d "${SDKROOT}/${OSVERSION}/${PLATFORM}/Lib/${TARGETCPU}" \ - -o ! -d "${WCEROOT}/EVC/${OSVERSION}/bin"; then - AC_MSG_ERROR([could not find PocketPC SDK or target compiler to enable WinCE mode [$CEVERSION,$TARGETCPU,$ARCH,$PLATFORM]]) - doWince="no" - else - # We could PATH_NOSPACE these, but that's not important, - # as long as we quote them when used. - CEINCLUDE="${SDKROOT}/${OSVERSION}/${PLATFORM}/include" - if test -d "${CEINCLUDE}/${TARGETCPU}" ; then - CEINCLUDE="${CEINCLUDE}/${TARGETCPU}" - fi - CELIBPATH="${SDKROOT}/${OSVERSION}/${PLATFORM}/Lib/${TARGETCPU}" - fi - fi - - if test "$GCC" != "yes" ; then - if test "${SHARED_BUILD}" = "0" ; then - runtime=-MT - else - runtime=-MD - fi - - if test "$do64bit" != "no" ; then - # All this magic is necessary for the Win64 SDK RC1 - hobbs - CC="\"${PATH64}/cl.exe\"" - CFLAGS="${CFLAGS} -I\"${MSSDK}/Include\" -I\"${MSSDK}/Include/crt\" -I\"${MSSDK}/Include/crt/sys\"" - RC="\"${MSSDK}/bin/rc.exe\"" - lflags="-nologo -MACHINE:${MACHINE} -LIBPATH:\"${MSSDK}/Lib/${MACHINE}\"" - LINKBIN="\"${PATH64}/link.exe\"" - CFLAGS_DEBUG="-nologo -Zi -Od -W3 ${runtime}d" - CFLAGS_OPTIMIZE="-nologo -O2 -W2 ${runtime}" - # Avoid 'unresolved external symbol __security_cookie' - # errors, c.f. http://support.microsoft.com/?id=894573 - TEA_ADD_LIBS([bufferoverflowU.lib]) - elif test "$doWince" != "no" ; then - CEBINROOT="${WCEROOT}/EVC/${OSVERSION}/bin" - if test "${TARGETCPU}" = "X86"; then - CC="\"${CEBINROOT}/cl.exe\"" - else - CC="\"${CEBINROOT}/cl${ARCH}.exe\"" - fi - CFLAGS="$CFLAGS -I\"${CELIB_DIR}/inc\" -I\"${CEINCLUDE}\"" - RC="\"${WCEROOT}/Common/EVC/bin/rc.exe\"" - arch=`echo ${ARCH} | awk '{print tolower([$]0)}'` - defs="${ARCH} _${ARCH}_ ${arch} PALM_SIZE _MT _WINDOWS" - if test "${SHARED_BUILD}" = "1" ; then - # Static CE builds require static celib as well - defs="${defs} _DLL" - fi - for i in $defs ; do - AC_DEFINE_UNQUOTED($i, 1, [WinCE def ]$i) - done - AC_DEFINE_UNQUOTED(_WIN32_WCE, $CEVERSION, [_WIN32_WCE version]) - AC_DEFINE_UNQUOTED(UNDER_CE, $CEVERSION, [UNDER_CE version]) - CFLAGS_DEBUG="-nologo -Zi -Od" - CFLAGS_OPTIMIZE="-nologo -Ox" - lversion=`echo ${CEVERSION} | sed -e 's/\(.\)\(..\)/\1\.\2/'` - lflags="-MACHINE:${ARCH} -LIBPATH:\"${CELIBPATH}\" -subsystem:windowsce,${lversion} -nologo" - LINKBIN="\"${CEBINROOT}/link.exe\"" - AC_SUBST(CELIB_DIR) - else - RC="rc" - lflags="-nologo" - LINKBIN="link" - CFLAGS_DEBUG="-nologo -Z7 -Od -W3 -WX ${runtime}d" - CFLAGS_OPTIMIZE="-nologo -O2 -W2 ${runtime}" - fi - fi - - if test "$GCC" = "yes"; then - # mingw gcc mode - RC="windres" - CFLAGS_DEBUG="-g" - CFLAGS_OPTIMIZE="-O2 -fomit-frame-pointer" - SHLIB_LD="$CC -shared" - UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.a' - LDFLAGS_CONSOLE="-wl,--subsystem,console ${lflags}" - LDFLAGS_WINDOW="-wl,--subsystem,windows ${lflags}" - else - SHLIB_LD="${LINKBIN} -dll ${lflags}" - # link -lib only works when -lib is the first arg - STLIB_LD="${LINKBIN} -lib ${lflags}" - UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.lib' - PATHTYPE=-w - # For information on what debugtype is most useful, see: - # http://msdn.microsoft.com/library/en-us/dnvc60/html/gendepdebug.asp - # and also - # http://msdn2.microsoft.com/en-us/library/y0zzbyt4%28VS.80%29.aspx - # This essentially turns it all on. - LDFLAGS_DEBUG="-debug -debugtype:cv" - LDFLAGS_OPTIMIZE="-release" - if test "$doWince" != "no" ; then - LDFLAGS_CONSOLE="-link ${lflags}" - LDFLAGS_WINDOW=${LDFLAGS_CONSOLE} - else - LDFLAGS_CONSOLE="-link -subsystem:console ${lflags}" - LDFLAGS_WINDOW="-link -subsystem:windows ${lflags}" - fi - fi - - SHLIB_LD_LIBS='${LIBS}' - SHLIB_SUFFIX=".dll" - SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.dll' - - TCL_LIB_VERSIONS_OK=nodots - # Bogus to avoid getting this turned off - DL_OBJS="tclLoadNone.obj" - ;; - AIX-*) - AS_IF([test "${TCL_THREADS}" = "1" -a "$GCC" != "yes"], [ - # AIX requires the _r compiler when gcc isn't being used - case "${CC}" in - *_r|*_r\ *) - # ok ... - ;; - *) - # Make sure only first arg gets _r - CC=`echo "$CC" | sed -e 's/^\([[^ ]]*\)/\1_r/'` - ;; - esac - AC_MSG_RESULT([Using $CC for compiling with threads]) - ]) - LIBS="$LIBS -lc" - SHLIB_CFLAGS="" - SHLIB_LD_LIBS='${LIBS}' - SHLIB_SUFFIX=".so" - - DL_OBJS="tclLoadDl.o" - LD_LIBRARY_PATH_VAR="LIBPATH" - - # Check to enable 64-bit flags for compiler/linker - AS_IF([test "$do64bit" = yes], [ - AS_IF([test "$GCC" = yes], [ - AC_MSG_WARN([64bit mode not supported with GCC on $system]) - ], [ - do64bit_ok=yes - CFLAGS="$CFLAGS -q64" - LDFLAGS_ARCH="-q64" - RANLIB="${RANLIB} -X64" - AR="${AR} -X64" - SHLIB_LD_FLAGS="-b64" - ]) - ]) - - AS_IF([test "`uname -m`" = ia64], [ - # AIX-5 uses ELF style dynamic libraries on IA-64, but not PPC - SHLIB_LD="/usr/ccs/bin/ld -G -z text" - # AIX-5 has dl* in libc.so - DL_LIBS="" - AS_IF([test "$GCC" = yes], [ - CC_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}' - ], [ - CC_SEARCH_FLAGS='-R${LIB_RUNTIME_DIR}' - ]) - LD_SEARCH_FLAGS='-R ${LIB_RUNTIME_DIR}' - ], [ - AS_IF([test "$GCC" = yes], [ - SHLIB_LD='${CC} -shared -Wl,-bexpall' - ], [ - SHLIB_LD="/bin/ld -bhalt:4 -bM:SRE -bexpall -H512 -T512 -bnoentry" - LDFLAGS="$LDFLAGS -brtl" - ]) - SHLIB_LD="${SHLIB_LD} ${SHLIB_LD_FLAGS}" - DL_LIBS="-ldl" - CC_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}' - LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} - ]) - ;; - BeOS*) - SHLIB_CFLAGS="-fPIC" - SHLIB_LD='${CC} -nostart' - SHLIB_LD_LIBS='${LIBS}' - SHLIB_SUFFIX=".so" - DL_OBJS="tclLoadDl.o" - DL_LIBS="-ldl" - - #----------------------------------------------------------- - # Check for inet_ntoa in -lbind, for BeOS (which also needs - # -lsocket, even if the network functions are in -lnet which - # is always linked to, for compatibility. - #----------------------------------------------------------- - AC_CHECK_LIB(bind, inet_ntoa, [LIBS="$LIBS -lbind -lsocket"]) - ;; - BSD/OS-4.*) - SHLIB_CFLAGS="-export-dynamic -fPIC" - SHLIB_LD='${CC} -shared' - SHLIB_LD_LIBS='${LIBS}' - SHLIB_SUFFIX=".so" - DL_OBJS="tclLoadDl.o" - DL_LIBS="-ldl" - LDFLAGS="$LDFLAGS -export-dynamic" - CC_SEARCH_FLAGS="" - LD_SEARCH_FLAGS="" - ;; - CYGWIN_*) - SHLIB_CFLAGS="" - SHLIB_LD='${CC} -shared' - SHLIB_LD_LIBS='${LIBS}' - SHLIB_SUFFIX=".dll" - EXE_SUFFIX=".exe" - DL_OBJS="tclLoadDl.o" - DL_LIBS="-ldl" - CC_SEARCH_FLAGS="" - LD_SEARCH_FLAGS="" - ;; - Haiku*) - LDFLAGS="$LDFLAGS -Wl,--export-dynamic" - SHLIB_CFLAGS="-fPIC" - SHLIB_LD_LIBS='${LIBS}' - SHLIB_SUFFIX=".so" - SHLIB_LD='${CC} -shared ${CFLAGS} ${LDFLAGS}' - DL_OBJS="tclLoadDl.o" - DL_LIBS="-lroot" - AC_CHECK_LIB(network, inet_ntoa, [LIBS="$LIBS -lnetwork"]) - ;; - HP-UX-*.11.*) - # Use updated header definitions where possible - AC_DEFINE(_XOPEN_SOURCE_EXTENDED, 1, [Do we want to use the XOPEN network library?]) - # TEA specific: Needed by Tcl, but not most extensions - #AC_DEFINE(_XOPEN_SOURCE, 1, [Do we want to use the XOPEN network library?]) - #LIBS="$LIBS -lxnet" # Use the XOPEN network library - - AS_IF([test "`uname -m`" = ia64], [ - SHLIB_SUFFIX=".so" - # Use newer C++ library for C++ extensions - #if test "$GCC" != "yes" ; then - # CPPFLAGS="-AA" - #fi - ], [ - SHLIB_SUFFIX=".sl" - ]) - AC_CHECK_LIB(dld, shl_load, tcl_ok=yes, tcl_ok=no) - AS_IF([test "$tcl_ok" = yes], [ - SHLIB_LD_LIBS='${LIBS}' - DL_OBJS="tclLoadShl.o" - DL_LIBS="-ldld" - LDFLAGS="$LDFLAGS -E" - CC_SEARCH_FLAGS='-Wl,+s,+b,${LIB_RUNTIME_DIR}:.' - LD_SEARCH_FLAGS='+s +b ${LIB_RUNTIME_DIR}:.' - LD_LIBRARY_PATH_VAR="SHLIB_PATH" - ]) - AS_IF([test "$GCC" = yes], [ - SHLIB_LD='${CC} -shared' - LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} - ], [ - CFLAGS="$CFLAGS -z" - # Users may want PA-RISC 1.1/2.0 portable code - needs HP cc - #CFLAGS="$CFLAGS +DAportable" - SHLIB_CFLAGS="+z" - SHLIB_LD="ld -b" - ]) - - # Check to enable 64-bit flags for compiler/linker - AS_IF([test "$do64bit" = "yes"], [ - AS_IF([test "$GCC" = yes], [ - case `${CC} -dumpmachine` in - hppa64*) - # 64-bit gcc in use. Fix flags for GNU ld. - do64bit_ok=yes - SHLIB_LD='${CC} -shared' - SHLIB_LD_LIBS='${LIBS}' - AS_IF([test $doRpath = yes], [ - CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}']) - LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} - ;; - *) - AC_MSG_WARN([64bit mode not supported with GCC on $system]) - ;; - esac - ], [ - do64bit_ok=yes - CFLAGS="$CFLAGS +DD64" - LDFLAGS_ARCH="+DD64" - ]) - ]) ;; - IRIX-6.*) - SHLIB_CFLAGS="" - SHLIB_LD="ld -n32 -shared -rdata_shared" - SHLIB_LD_LIBS='${LIBS}' - SHLIB_SUFFIX=".so" - DL_OBJS="tclLoadDl.o" - DL_LIBS="" - AS_IF([test $doRpath = yes], [ - CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' - LD_SEARCH_FLAGS='-rpath ${LIB_RUNTIME_DIR}']) - AS_IF([test "$GCC" = yes], [ - CFLAGS="$CFLAGS -mabi=n32" - LDFLAGS="$LDFLAGS -mabi=n32" - ], [ - case $system in - IRIX-6.3) - # Use to build 6.2 compatible binaries on 6.3. - CFLAGS="$CFLAGS -n32 -D_OLD_TERMIOS" - ;; - *) - CFLAGS="$CFLAGS -n32" - ;; - esac - LDFLAGS="$LDFLAGS -n32" - ]) - ;; - IRIX64-6.*) - SHLIB_CFLAGS="" - SHLIB_LD="ld -n32 -shared -rdata_shared" - SHLIB_LD_LIBS='${LIBS}' - SHLIB_SUFFIX=".so" - DL_OBJS="tclLoadDl.o" - DL_LIBS="" - AS_IF([test $doRpath = yes], [ - CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' - LD_SEARCH_FLAGS='-rpath ${LIB_RUNTIME_DIR}']) - - # Check to enable 64-bit flags for compiler/linker - - AS_IF([test "$do64bit" = yes], [ - AS_IF([test "$GCC" = yes], [ - AC_MSG_WARN([64bit mode not supported by gcc]) - ], [ - do64bit_ok=yes - SHLIB_LD="ld -64 -shared -rdata_shared" - CFLAGS="$CFLAGS -64" - LDFLAGS_ARCH="-64" - ]) - ]) - ;; - Linux*) - SHLIB_CFLAGS="-fPIC" - SHLIB_LD_LIBS='${LIBS}' - SHLIB_SUFFIX=".so" - - # TEA specific: - CFLAGS_OPTIMIZE="-O2 -fomit-frame-pointer" - # egcs-2.91.66 on Redhat Linux 6.0 generates lots of warnings - # when you inline the string and math operations. Turn this off to - # get rid of the warnings. - #CFLAGS_OPTIMIZE="${CFLAGS_OPTIMIZE} -D__NO_STRING_INLINES -D__NO_MATH_INLINES" - - # TEA specific: use LDFLAGS_DEFAULT instead of LDFLAGS - SHLIB_LD='${CC} -shared ${CFLAGS} ${LDFLAGS_DEFAULT}' - DL_OBJS="tclLoadDl.o" - DL_LIBS="-ldl" - LDFLAGS="$LDFLAGS -Wl,--export-dynamic" - AS_IF([test $doRpath = yes], [ - CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}']) - LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} - AS_IF([test "`uname -m`" = "alpha"], [CFLAGS="$CFLAGS -mieee"]) - AS_IF([test $do64bit = yes], [ - AC_CACHE_CHECK([if compiler accepts -m64 flag], tcl_cv_cc_m64, [ - hold_cflags=$CFLAGS - CFLAGS="$CFLAGS -m64" - AC_TRY_LINK(,, tcl_cv_cc_m64=yes, tcl_cv_cc_m64=no) - CFLAGS=$hold_cflags]) - AS_IF([test $tcl_cv_cc_m64 = yes], [ - CFLAGS="$CFLAGS -m64" - do64bit_ok=yes - ]) - ]) - - # The combo of gcc + glibc has a bug related to inlining of - # functions like strtod(). The -fno-builtin flag should address - # this problem but it does not work. The -fno-inline flag is kind - # of overkill but it works. Disable inlining only when one of the - # files in compat/*.c is being linked in. - - AS_IF([test x"${USE_COMPAT}" != x],[CFLAGS="$CFLAGS -fno-inline"]) - - ;; - GNU*) - SHLIB_CFLAGS="-fPIC" - SHLIB_LD_LIBS='${LIBS}' - SHLIB_SUFFIX=".so" - - SHLIB_LD='${CC} -shared' - DL_OBJS="" - DL_LIBS="-ldl" - LDFLAGS="$LDFLAGS -Wl,--export-dynamic" - CC_SEARCH_FLAGS="" - LD_SEARCH_FLAGS="" - AS_IF([test "`uname -m`" = "alpha"], [CFLAGS="$CFLAGS -mieee"]) - ;; - Lynx*) - SHLIB_CFLAGS="-fPIC" - SHLIB_LD_LIBS='${LIBS}' - SHLIB_SUFFIX=".so" - CFLAGS_OPTIMIZE=-02 - SHLIB_LD='${CC} -shared' - DL_OBJS="tclLoadDl.o" - DL_LIBS="-mshared -ldl" - LD_FLAGS="-Wl,--export-dynamic" - AS_IF([test $doRpath = yes], [ - CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' - LD_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}']) - ;; - OpenBSD-*) - SHLIB_CFLAGS="-fPIC" - SHLIB_LD='${CC} -shared ${SHLIB_CFLAGS}' - SHLIB_LD_LIBS='${LIBS}' - SHLIB_SUFFIX=".so" - DL_OBJS="tclLoadDl.o" - DL_LIBS="" - AS_IF([test $doRpath = yes], [ - CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}']) - LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} - SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.so.${SHLIB_VERSION}' - AC_CACHE_CHECK([for ELF], tcl_cv_ld_elf, [ - AC_EGREP_CPP(yes, [ -#ifdef __ELF__ - yes -#endif - ], tcl_cv_ld_elf=yes, tcl_cv_ld_elf=no)]) - AS_IF([test $tcl_cv_ld_elf = yes], [ - LDFLAGS=-Wl,-export-dynamic - ], [LDFLAGS=""]) - AS_IF([test "${TCL_THREADS}" = "1"], [ - # OpenBSD builds and links with -pthread, never -lpthread. - LIBS=`echo $LIBS | sed s/-lpthread//` - CFLAGS="$CFLAGS -pthread" - SHLIB_CFLAGS="$SHLIB_CFLAGS -pthread" - ]) - # OpenBSD doesn't do version numbers with dots. - UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.a' - TCL_LIB_VERSIONS_OK=nodots - ;; - NetBSD-*|FreeBSD-[[3-4]].*) - # FreeBSD 3.* and greater have ELF. - # NetBSD 2.* has ELF and can use 'cc -shared' to build shared libs - SHLIB_CFLAGS="-fPIC" - SHLIB_LD='${CC} -shared ${SHLIB_CFLAGS}' - SHLIB_LD_LIBS='${LIBS}' - SHLIB_SUFFIX=".so" - DL_OBJS="tclLoadDl.o" - DL_LIBS="" - LDFLAGS="$LDFLAGS -export-dynamic" - AS_IF([test $doRpath = yes], [ - CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}']) - LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} - AS_IF([test "${TCL_THREADS}" = "1"], [ - # The -pthread needs to go in the CFLAGS, not LIBS - LIBS=`echo $LIBS | sed s/-pthread//` - CFLAGS="$CFLAGS -pthread" - LDFLAGS="$LDFLAGS -pthread" - ]) - case $system in - FreeBSD-3.*) - # FreeBSD-3 doesn't handle version numbers with dots. - UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.a' - SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.so' - TCL_LIB_VERSIONS_OK=nodots - ;; - esac - ;; - FreeBSD-*) - # This configuration from FreeBSD Ports. - SHLIB_CFLAGS="-fPIC" - SHLIB_LD="${CC} -shared" - TCL_SHLIB_LD_EXTRAS="-soname \$[@]" - SHLIB_LD_LIBS='${LIBS}' - SHLIB_SUFFIX=".so" - DL_OBJS="tclLoadDl.o" - DL_LIBS="" - LDFLAGS="" - AS_IF([test $doRpath = yes], [ - CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' - LD_SEARCH_FLAGS='-rpath ${LIB_RUNTIME_DIR}']) - AS_IF([test "${TCL_THREADS}" = "1"], [ - # The -pthread needs to go in the LDFLAGS, not LIBS - LIBS=`echo $LIBS | sed s/-pthread//` - CFLAGS="$CFLAGS $PTHREAD_CFLAGS" - LDFLAGS="$LDFLAGS $PTHREAD_LIBS"]) - # Version numbers are dot-stripped by system policy. - TCL_TRIM_DOTS=`echo ${VERSION} | tr -d .` - UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.a' - SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}\$\{DBGX\}.so.1' - TCL_LIB_VERSIONS_OK=nodots - ;; - Darwin-*) - CFLAGS_OPTIMIZE="-Os" - SHLIB_CFLAGS="-fno-common" - # To avoid discrepancies between what headers configure sees during - # preprocessing tests and compiling tests, move any -isysroot and - # -mmacosx-version-min flags from CFLAGS to CPPFLAGS: - CPPFLAGS="${CPPFLAGS} `echo " ${CFLAGS}" | \ - awk 'BEGIN {FS=" +-";ORS=" "}; {for (i=2;i<=NF;i++) \ - if ([$]i~/^(isysroot|mmacosx-version-min)/) print "-"[$]i}'`" - CFLAGS="`echo " ${CFLAGS}" | \ - awk 'BEGIN {FS=" +-";ORS=" "}; {for (i=2;i<=NF;i++) \ - if (!([$]i~/^(isysroot|mmacosx-version-min)/)) print "-"[$]i}'`" - AS_IF([test $do64bit = yes], [ - case `arch` in - ppc) - AC_CACHE_CHECK([if compiler accepts -arch ppc64 flag], - tcl_cv_cc_arch_ppc64, [ - hold_cflags=$CFLAGS - CFLAGS="$CFLAGS -arch ppc64 -mpowerpc64 -mcpu=G5" - AC_TRY_LINK(,, tcl_cv_cc_arch_ppc64=yes, - tcl_cv_cc_arch_ppc64=no) - CFLAGS=$hold_cflags]) - AS_IF([test $tcl_cv_cc_arch_ppc64 = yes], [ - CFLAGS="$CFLAGS -arch ppc64 -mpowerpc64 -mcpu=G5" - do64bit_ok=yes - ]);; - i386) - AC_CACHE_CHECK([if compiler accepts -arch x86_64 flag], - tcl_cv_cc_arch_x86_64, [ - hold_cflags=$CFLAGS - CFLAGS="$CFLAGS -arch x86_64" - AC_TRY_LINK(,, tcl_cv_cc_arch_x86_64=yes, - tcl_cv_cc_arch_x86_64=no) - CFLAGS=$hold_cflags]) - AS_IF([test $tcl_cv_cc_arch_x86_64 = yes], [ - CFLAGS="$CFLAGS -arch x86_64" - do64bit_ok=yes - ]);; - *) - AC_MSG_WARN([Don't know how enable 64-bit on architecture `arch`]);; - esac - ], [ - # Check for combined 32-bit and 64-bit fat build - AS_IF([echo "$CFLAGS " |grep -E -q -- '-arch (ppc64|x86_64) ' \ - && echo "$CFLAGS " |grep -E -q -- '-arch (ppc|i386) '], [ - fat_32_64=yes]) - ]) - # TEA specific: use LDFLAGS_DEFAULT instead of LDFLAGS - SHLIB_LD='${CC} -dynamiclib ${CFLAGS} ${LDFLAGS_DEFAULT}' - AC_CACHE_CHECK([if ld accepts -single_module flag], tcl_cv_ld_single_module, [ - hold_ldflags=$LDFLAGS - LDFLAGS="$LDFLAGS -dynamiclib -Wl,-single_module" - AC_TRY_LINK(, [int i;], tcl_cv_ld_single_module=yes, tcl_cv_ld_single_module=no) - LDFLAGS=$hold_ldflags]) - AS_IF([test $tcl_cv_ld_single_module = yes], [ - SHLIB_LD="${SHLIB_LD} -Wl,-single_module" - ]) - # TEA specific: link shlib with current and compatiblity version flags - vers=`echo ${PACKAGE_VERSION} | sed -e 's/^\([[0-9]]\{1,5\}\)\(\(\.[[0-9]]\{1,3\}\)\{0,2\}\).*$/\1\2/p' -e d` - SHLIB_LD="${SHLIB_LD} -current_version ${vers:-0} -compatibility_version ${vers:-0}" - SHLIB_LD_LIBS='${LIBS}' - SHLIB_SUFFIX=".dylib" - DL_OBJS="tclLoadDyld.o" - DL_LIBS="" - # Don't use -prebind when building for Mac OS X 10.4 or later only: - AS_IF([test "`echo "${MACOSX_DEPLOYMENT_TARGET}" | awk -F '10\\.' '{print int([$]2)}'`" -lt 4 -a \ - "`echo "${CPPFLAGS}" | awk -F '-mmacosx-version-min=10\\.' '{print int([$]2)}'`" -lt 4], [ - LDFLAGS="$LDFLAGS -prebind"]) - LDFLAGS="$LDFLAGS -headerpad_max_install_names" - AC_CACHE_CHECK([if ld accepts -search_paths_first flag], - tcl_cv_ld_search_paths_first, [ - hold_ldflags=$LDFLAGS - LDFLAGS="$LDFLAGS -Wl,-search_paths_first" - AC_TRY_LINK(, [int i;], tcl_cv_ld_search_paths_first=yes, - tcl_cv_ld_search_paths_first=no) - LDFLAGS=$hold_ldflags]) - AS_IF([test $tcl_cv_ld_search_paths_first = yes], [ - LDFLAGS="$LDFLAGS -Wl,-search_paths_first" - ]) - AS_IF([test "$tcl_cv_cc_visibility_hidden" != yes], [ - AC_DEFINE(MODULE_SCOPE, [__private_extern__], - [Compiler support for module scope symbols]) - tcl_cv_cc_visibility_hidden=yes - ]) - CC_SEARCH_FLAGS="" - LD_SEARCH_FLAGS="" - LD_LIBRARY_PATH_VAR="DYLD_LIBRARY_PATH" - # TEA specific: for combined 32 & 64 bit fat builds of Tk - # extensions, verify that 64-bit build is possible. - AS_IF([test "$fat_32_64" = yes && test -n "${TK_BIN_DIR}"], [ - AS_IF([test "${TEA_WINDOWINGSYSTEM}" = x11], [ - AC_CACHE_CHECK([for 64-bit X11], tcl_cv_lib_x11_64, [ - for v in CFLAGS CPPFLAGS LDFLAGS; do - eval 'hold_'$v'="$'$v'";'$v'="`echo "$'$v' "|sed -e "s/-arch ppc / /g" -e "s/-arch i386 / /g"`"' - done - CPPFLAGS="$CPPFLAGS -I/usr/X11R6/include" - LDFLAGS="$LDFLAGS -L/usr/X11R6/lib -lX11" - AC_TRY_LINK([#include ], [XrmInitialize();], - tcl_cv_lib_x11_64=yes, tcl_cv_lib_x11_64=no) - for v in CFLAGS CPPFLAGS LDFLAGS; do - eval $v'="$hold_'$v'"' - done]) - ]) - AS_IF([test "${TEA_WINDOWINGSYSTEM}" = aqua], [ - AC_CACHE_CHECK([for 64-bit Tk], tcl_cv_lib_tk_64, [ - for v in CFLAGS CPPFLAGS LDFLAGS; do - eval 'hold_'$v'="$'$v'";'$v'="`echo "$'$v' "|sed -e "s/-arch ppc / /g" -e "s/-arch i386 / /g"`"' - done - CPPFLAGS="$CPPFLAGS -DUSE_TCL_STUBS=1 -DUSE_TK_STUBS=1 ${TCL_INCLUDES} ${TK_INCLUDES}" - LDFLAGS="$LDFLAGS ${TCL_STUB_LIB_SPEC} ${TK_STUB_LIB_SPEC}" - AC_TRY_LINK([#include ], [Tk_InitStubs(NULL, "", 0);], - tcl_cv_lib_tk_64=yes, tcl_cv_lib_tk_64=no) - for v in CFLAGS CPPFLAGS LDFLAGS; do - eval $v'="$hold_'$v'"' - done]) - ]) - # remove 64-bit arch flags from CFLAGS et al. if configuration - # does not support 64-bit. - AS_IF([test "$tcl_cv_lib_tk_64" = no -o "$tcl_cv_lib_x11_64" = no], [ - AC_MSG_NOTICE([Removing 64-bit architectures from compiler & linker flags]) - for v in CFLAGS CPPFLAGS LDFLAGS; do - eval $v'="`echo "$'$v' "|sed -e "s/-arch ppc64 / /g" -e "s/-arch x86_64 / /g"`"' - done]) - ]) - ;; - OS/390-*) - CFLAGS_OPTIMIZE="" # Optimizer is buggy - AC_DEFINE(_OE_SOCKETS, 1, # needed in sys/socket.h - [Should OS/390 do the right thing with sockets?]) - ;; - OSF1-V*) - # Digital OSF/1 - SHLIB_CFLAGS="" - AS_IF([test "$SHARED_BUILD" = 1], [ - SHLIB_LD='ld -shared -expect_unresolved "*"' - ], [ - SHLIB_LD='ld -non_shared -expect_unresolved "*"' - ]) - SHLIB_LD_LIBS="" - SHLIB_SUFFIX=".so" - DL_OBJS="tclLoadDl.o" - DL_LIBS="" - AS_IF([test $doRpath = yes], [ - CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' - LD_SEARCH_FLAGS='-rpath ${LIB_RUNTIME_DIR}']) - AS_IF([test "$GCC" = yes], [CFLAGS="$CFLAGS -mieee"], [ - CFLAGS="$CFLAGS -DHAVE_TZSET -std1 -ieee"]) - # see pthread_intro(3) for pthread support on osf1, k.furukawa - AS_IF([test "${TCL_THREADS}" = 1], [ - CFLAGS="$CFLAGS -DHAVE_PTHREAD_ATTR_SETSTACKSIZE" - CFLAGS="$CFLAGS -DTCL_THREAD_STACK_MIN=PTHREAD_STACK_MIN*64" - LIBS=`echo $LIBS | sed s/-lpthreads//` - AS_IF([test "$GCC" = yes], [ - LIBS="$LIBS -lpthread -lmach -lexc" - ], [ - CFLAGS="$CFLAGS -pthread" - LDFLAGS="$LDFLAGS -pthread" - ]) - ]) - ;; - QNX-6*) - # QNX RTP - # This may work for all QNX, but it was only reported for v6. - SHLIB_CFLAGS="-fPIC" - SHLIB_LD="ld -Bshareable -x" - SHLIB_LD_LIBS="" - SHLIB_SUFFIX=".so" - DL_OBJS="tclLoadDl.o" - # dlopen is in -lc on QNX - DL_LIBS="" - CC_SEARCH_FLAGS="" - LD_SEARCH_FLAGS="" - ;; - SunOS-5.[[0-6]]) - # Careful to not let 5.10+ fall into this case - - # Note: If _REENTRANT isn't defined, then Solaris - # won't define thread-safe library routines. - - AC_DEFINE(_REENTRANT, 1, [Do we want the reentrant OS API?]) - AC_DEFINE(_POSIX_PTHREAD_SEMANTICS, 1, - [Do we really want to follow the standard? Yes we do!]) - - SHLIB_CFLAGS="-KPIC" - - # Note: need the LIBS below, otherwise Tk won't find Tcl's - # symbols when dynamically loaded into tclsh. - - SHLIB_LD_LIBS='${LIBS}' - SHLIB_SUFFIX=".so" - DL_OBJS="tclLoadDl.o" - DL_LIBS="-ldl" - AS_IF([test "$GCC" = yes], [ - SHLIB_LD='${CC} -shared' - CC_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}' - LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} - ], [ - SHLIB_LD="/usr/ccs/bin/ld -G -z text" - CC_SEARCH_FLAGS='-R ${LIB_RUNTIME_DIR}' - LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} - ]) - ;; - SunOS-5*) - # Note: If _REENTRANT isn't defined, then Solaris - # won't define thread-safe library routines. - - AC_DEFINE(_REENTRANT, 1, [Do we want the reentrant OS API?]) - AC_DEFINE(_POSIX_PTHREAD_SEMANTICS, 1, - [Do we really want to follow the standard? Yes we do!]) - - SHLIB_CFLAGS="-KPIC" - - # Check to enable 64-bit flags for compiler/linker - AS_IF([test "$do64bit" = yes], [ - arch=`isainfo` - AS_IF([test "$arch" = "sparcv9 sparc"], [ - AS_IF([test "$GCC" = yes], [ - AS_IF([test "`${CC} -dumpversion | awk -F. '{print [$]1}'`" -lt 3], [ - AC_MSG_WARN([64bit mode not supported with GCC < 3.2 on $system]) - ], [ - do64bit_ok=yes - CFLAGS="$CFLAGS -m64 -mcpu=v9" - LDFLAGS="$LDFLAGS -m64 -mcpu=v9" - SHLIB_CFLAGS="-fPIC" - ]) - ], [ - do64bit_ok=yes - AS_IF([test "$do64bitVIS" = yes], [ - CFLAGS="$CFLAGS -xarch=v9a" - LDFLAGS_ARCH="-xarch=v9a" - ], [ - CFLAGS="$CFLAGS -xarch=v9" - LDFLAGS_ARCH="-xarch=v9" - ]) - # Solaris 64 uses this as well - #LD_LIBRARY_PATH_VAR="LD_LIBRARY_PATH_64" - ]) - ], [AS_IF([test "$arch" = "amd64 i386"], [ - AS_IF([test "$GCC" = yes], [ - case $system in - SunOS-5.1[[1-9]]*|SunOS-5.[[2-9]][[0-9]]*) - do64bit_ok=yes - CFLAGS="$CFLAGS -m64" - LDFLAGS="$LDFLAGS -m64";; - *) - AC_MSG_WARN([64bit mode not supported with GCC on $system]);; - esac - ], [ - do64bit_ok=yes - case $system in - SunOS-5.1[[1-9]]*|SunOS-5.[[2-9]][[0-9]]*) - CFLAGS="$CFLAGS -m64" - LDFLAGS="$LDFLAGS -m64";; - *) - CFLAGS="$CFLAGS -xarch=amd64" - LDFLAGS="$LDFLAGS -xarch=amd64";; - esac - ]) - ], [AC_MSG_WARN([64bit mode not supported for $arch])])]) - ]) - - # Note: need the LIBS below, otherwise Tk won't find Tcl's - # symbols when dynamically loaded into tclsh. - - SHLIB_LD_LIBS='${LIBS}' - SHLIB_SUFFIX=".so" - DL_OBJS="tclLoadDl.o" - DL_LIBS="-ldl" - AS_IF([test "$GCC" = yes], [ - SHLIB_LD='${CC} -shared' - CC_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}' - LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS} - AS_IF([test "$do64bit_ok" = yes], [ - AS_IF([test "$arch" = "sparcv9 sparc"], [ - # We need to specify -static-libgcc or we need to - # add the path to the sparv9 libgcc. - # JH: static-libgcc is necessary for core Tcl, but may - # not be necessary for extensions. - SHLIB_LD="$SHLIB_LD -m64 -mcpu=v9 -static-libgcc" - # for finding sparcv9 libgcc, get the regular libgcc - # path, remove so name and append 'sparcv9' - #v9gcclibdir="`gcc -print-file-name=libgcc_s.so` | ..." - #CC_SEARCH_FLAGS="${CC_SEARCH_FLAGS},-R,$v9gcclibdir" - ], [AS_IF([test "$arch" = "amd64 i386"], [ - # JH: static-libgcc is necessary for core Tcl, but may - # not be necessary for extensions. - SHLIB_LD="$SHLIB_LD -m64 -static-libgcc" - ])]) - ]) - ], [ - case $system in - SunOS-5.[[1-9]][[0-9]]*) - # TEA specific: use LDFLAGS_DEFAULT instead of LDFLAGS - SHLIB_LD='${CC} -G -z text ${LDFLAGS_DEFAULT}';; - *) - SHLIB_LD='/usr/ccs/bin/ld -G -z text';; - esac - CC_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}' - LD_SEARCH_FLAGS='-R ${LIB_RUNTIME_DIR}' - ]) - ;; - esac - - AS_IF([test "$do64bit" = yes -a "$do64bit_ok" = no], [ - AC_MSG_WARN([64bit support being disabled -- don't know magic for this platform]) - ]) - -dnl # Add any CPPFLAGS set in the environment to our CFLAGS, but delay doing so -dnl # until the end of configure, as configure's compile and link tests use -dnl # both CPPFLAGS and CFLAGS (unlike our compile and link) but configure's -dnl # preprocessing tests use only CPPFLAGS. - AC_CONFIG_COMMANDS_PRE([CFLAGS="${CFLAGS} ${CPPFLAGS}"; CPPFLAGS=""]) - - # Step 4: disable dynamic loading if requested via a command-line switch. - - AC_ARG_ENABLE(load, - AC_HELP_STRING([--enable-load], - [allow dynamic loading and "load" command (default: on)]), - [tcl_ok=$enableval], [tcl_ok=yes]) - AS_IF([test "$tcl_ok" = no], [DL_OBJS=""]) - - AS_IF([test "x$DL_OBJS" != x], [BUILD_DLTEST="\$(DLTEST_TARGETS)"], [ - AC_MSG_WARN([Can't figure out how to do dynamic loading or shared libraries on this system.]) - SHLIB_CFLAGS="" - SHLIB_LD="" - SHLIB_SUFFIX="" - DL_OBJS="tclLoadNone.o" - DL_LIBS="" - LDFLAGS="$LDFLAGS_ORIG" - CC_SEARCH_FLAGS="" - LD_SEARCH_FLAGS="" - BUILD_DLTEST="" - ]) - LDFLAGS="$LDFLAGS $LDFLAGS_ARCH" - - # If we're running gcc, then change the C flags for compiling shared - # libraries to the right flags for gcc, instead of those for the - # standard manufacturer compiler. - - AS_IF([test "$DL_OBJS" != "tclLoadNone.o" -a "$GCC" = yes], [ - case $system in - AIX-*) ;; - BSD/OS*) ;; - CYGWIN_*) ;; - IRIX*) ;; - NetBSD-*|FreeBSD-*|OpenBSD-*) ;; - Darwin-*) ;; - SCO_SV-3.2*) ;; - windows) ;; - *) SHLIB_CFLAGS="-fPIC" ;; - esac]) - - AS_IF([test "$tcl_cv_cc_visibility_hidden" != yes], [ - AC_DEFINE(MODULE_SCOPE, [extern], - [No Compiler support for module scope symbols]) - AC_DEFINE(NO_VIZ) - ]) - - AS_IF([test "$SHARED_LIB_SUFFIX" = ""], [ - # TEA specific: use PACKAGE_VERSION instead of VERSION - SHARED_LIB_SUFFIX='${PACKAGE_VERSION}${SHLIB_SUFFIX}']) - AS_IF([test "$UNSHARED_LIB_SUFFIX" = ""], [ - # TEA specific: use PACKAGE_VERSION instead of VERSION - UNSHARED_LIB_SUFFIX='${PACKAGE_VERSION}.a']) - - AC_SUBST(DL_LIBS) - - AC_SUBST(CFLAGS_DEBUG) - AC_SUBST(CFLAGS_OPTIMIZE) - AC_SUBST(CFLAGS_WARNING) - - AC_SUBST(STLIB_LD) - AC_SUBST(SHLIB_LD) - - AC_SUBST(SHLIB_LD_LIBS) - AC_SUBST(SHLIB_CFLAGS) - - AC_SUBST(LD_LIBRARY_PATH_VAR) - - # These must be called after we do the basic CFLAGS checks and - # verify any possible 64-bit or similar switches are necessary - TEA_TCL_EARLY_FLAGS - TEA_TCL_64BIT_FLAGS -]) - -#-------------------------------------------------------------------- -# TEA_SERIAL_PORT -# -# Determine which interface to use to talk to the serial port. -# Note that #include lines must begin in leftmost column for -# some compilers to recognize them as preprocessor directives, -# and some build environments have stdin not pointing at a -# pseudo-terminal (usually /dev/null instead.) -# -# Arguments: -# none -# -# Results: -# -# Defines only one of the following vars: -# HAVE_SYS_MODEM_H -# USE_TERMIOS -# USE_TERMIO -# USE_SGTTY -# -#-------------------------------------------------------------------- - -AC_DEFUN([TEA_SERIAL_PORT], [ - AC_CHECK_HEADERS(sys/modem.h) - AC_CACHE_CHECK([termios vs. termio vs. sgtty], tcl_cv_api_serial, [ - AC_TRY_RUN([ -#include - -int main() { - struct termios t; - if (tcgetattr(0, &t) == 0) { - cfsetospeed(&t, 0); - t.c_cflag |= PARENB | PARODD | CSIZE | CSTOPB; - return 0; - } - return 1; -}], tcl_cv_api_serial=termios, tcl_cv_api_serial=no, tcl_cv_api_serial=no) - if test $tcl_cv_api_serial = no ; then - AC_TRY_RUN([ -#include - -int main() { - struct termio t; - if (ioctl(0, TCGETA, &t) == 0) { - t.c_cflag |= CBAUD | PARENB | PARODD | CSIZE | CSTOPB; - return 0; - } - return 1; -}], tcl_cv_api_serial=termio, tcl_cv_api_serial=no, tcl_cv_api_serial=no) - fi - if test $tcl_cv_api_serial = no ; then - AC_TRY_RUN([ -#include - -int main() { - struct sgttyb t; - if (ioctl(0, TIOCGETP, &t) == 0) { - t.sg_ospeed = 0; - t.sg_flags |= ODDP | EVENP | RAW; - return 0; - } - return 1; -}], tcl_cv_api_serial=sgtty, tcl_cv_api_serial=no, tcl_cv_api_serial=no) - fi - if test $tcl_cv_api_serial = no ; then - AC_TRY_RUN([ -#include -#include - -int main() { - struct termios t; - if (tcgetattr(0, &t) == 0 - || errno == ENOTTY || errno == ENXIO || errno == EINVAL) { - cfsetospeed(&t, 0); - t.c_cflag |= PARENB | PARODD | CSIZE | CSTOPB; - return 0; - } - return 1; -}], tcl_cv_api_serial=termios, tcl_cv_api_serial=no, tcl_cv_api_serial=no) - fi - if test $tcl_cv_api_serial = no; then - AC_TRY_RUN([ -#include -#include - -int main() { - struct termio t; - if (ioctl(0, TCGETA, &t) == 0 - || errno == ENOTTY || errno == ENXIO || errno == EINVAL) { - t.c_cflag |= CBAUD | PARENB | PARODD | CSIZE | CSTOPB; - return 0; - } - return 1; - }], tcl_cv_api_serial=termio, tcl_cv_api_serial=no, tcl_cv_api_serial=no) - fi - if test $tcl_cv_api_serial = no; then - AC_TRY_RUN([ -#include -#include - -int main() { - struct sgttyb t; - if (ioctl(0, TIOCGETP, &t) == 0 - || errno == ENOTTY || errno == ENXIO || errno == EINVAL) { - t.sg_ospeed = 0; - t.sg_flags |= ODDP | EVENP | RAW; - return 0; - } - return 1; -}], tcl_cv_api_serial=sgtty, tcl_cv_api_serial=none, tcl_cv_api_serial=none) - fi]) - case $tcl_cv_api_serial in - termios) AC_DEFINE(USE_TERMIOS, 1, [Use the termios API for serial lines]);; - termio) AC_DEFINE(USE_TERMIO, 1, [Use the termio API for serial lines]);; - sgtty) AC_DEFINE(USE_SGTTY, 1, [Use the sgtty API for serial lines]);; - esac -]) - -#-------------------------------------------------------------------- -# TEA_MISSING_POSIX_HEADERS -# -# Supply substitutes for missing POSIX header files. Special -# notes: -# - stdlib.h doesn't define strtol, strtoul, or -# strtod in some versions of SunOS -# - some versions of string.h don't declare procedures such -# as strstr -# -# Arguments: -# none -# -# Results: -# -# Defines some of the following vars: -# NO_DIRENT_H -# NO_ERRNO_H -# NO_VALUES_H -# HAVE_LIMITS_H or NO_LIMITS_H -# NO_STDLIB_H -# NO_STRING_H -# NO_SYS_WAIT_H -# NO_DLFCN_H -# HAVE_SYS_PARAM_H -# -# HAVE_STRING_H ? -# -# tkUnixPort.h checks for HAVE_LIMITS_H, so do both HAVE and -# CHECK on limits.h -#-------------------------------------------------------------------- - -AC_DEFUN([TEA_MISSING_POSIX_HEADERS], [ - AC_CACHE_CHECK([dirent.h], tcl_cv_dirent_h, [ - AC_TRY_LINK([#include -#include ], [ -#ifndef _POSIX_SOURCE -# ifdef __Lynx__ - /* - * Generate compilation error to make the test fail: Lynx headers - * are only valid if really in the POSIX environment. - */ - - missing_procedure(); -# endif -#endif -DIR *d; -struct dirent *entryPtr; -char *p; -d = opendir("foobar"); -entryPtr = readdir(d); -p = entryPtr->d_name; -closedir(d); -], tcl_cv_dirent_h=yes, tcl_cv_dirent_h=no)]) - - if test $tcl_cv_dirent_h = no; then - AC_DEFINE(NO_DIRENT_H, 1, [Do we have ?]) - fi - - # TEA specific: - AC_CHECK_HEADER(errno.h, , [AC_DEFINE(NO_ERRNO_H, 1, [Do we have ?])]) - AC_CHECK_HEADER(float.h, , [AC_DEFINE(NO_FLOAT_H, 1, [Do we have ?])]) - AC_CHECK_HEADER(values.h, , [AC_DEFINE(NO_VALUES_H, 1, [Do we have ?])]) - AC_CHECK_HEADER(limits.h, - [AC_DEFINE(HAVE_LIMITS_H, 1, [Do we have ?])], - [AC_DEFINE(NO_LIMITS_H, 1, [Do we have ?])]) - AC_CHECK_HEADER(stdlib.h, tcl_ok=1, tcl_ok=0) - AC_EGREP_HEADER(strtol, stdlib.h, , tcl_ok=0) - AC_EGREP_HEADER(strtoul, stdlib.h, , tcl_ok=0) - AC_EGREP_HEADER(strtod, stdlib.h, , tcl_ok=0) - if test $tcl_ok = 0; then - AC_DEFINE(NO_STDLIB_H, 1, [Do we have ?]) - fi - AC_CHECK_HEADER(string.h, tcl_ok=1, tcl_ok=0) - AC_EGREP_HEADER(strstr, string.h, , tcl_ok=0) - AC_EGREP_HEADER(strerror, string.h, , tcl_ok=0) - - # See also memmove check below for a place where NO_STRING_H can be - # set and why. - - if test $tcl_ok = 0; then - AC_DEFINE(NO_STRING_H, 1, [Do we have ?]) - fi - - AC_CHECK_HEADER(sys/wait.h, , [AC_DEFINE(NO_SYS_WAIT_H, 1, [Do we have ?])]) - AC_CHECK_HEADER(dlfcn.h, , [AC_DEFINE(NO_DLFCN_H, 1, [Do we have ?])]) - - # OS/390 lacks sys/param.h (and doesn't need it, by chance). - AC_HAVE_HEADERS(sys/param.h) -]) - -#-------------------------------------------------------------------- -# TEA_PATH_X -# -# Locate the X11 header files and the X11 library archive. Try -# the ac_path_x macro first, but if it doesn't find the X stuff -# (e.g. because there's no xmkmf program) then check through -# a list of possible directories. Under some conditions the -# autoconf macro will return an include directory that contains -# no include files, so double-check its result just to be safe. -# -# This should be called after TEA_CONFIG_CFLAGS as setting the -# LIBS line can confuse some configure macro magic. -# -# Arguments: -# none -# -# Results: -# -# Sets the following vars: -# XINCLUDES -# XLIBSW -# PKG_LIBS (appends to) -# -#-------------------------------------------------------------------- - -AC_DEFUN([TEA_PATH_X], [ - if test "${TEA_WINDOWINGSYSTEM}" = "x11" ; then - TEA_PATH_UNIX_X - fi -]) - -AC_DEFUN([TEA_PATH_UNIX_X], [ - AC_PATH_X - not_really_there="" - if test "$no_x" = ""; then - if test "$x_includes" = ""; then - AC_TRY_CPP([#include ], , not_really_there="yes") - else - if test ! -r $x_includes/X11/Intrinsic.h; then - not_really_there="yes" - fi - fi - fi - if test "$no_x" = "yes" -o "$not_really_there" = "yes"; then - AC_MSG_CHECKING([for X11 header files]) - found_xincludes="no" - AC_TRY_CPP([#include ], found_xincludes="yes", found_xincludes="no") - if test "$found_xincludes" = "no"; then - dirs="/usr/unsupported/include /usr/local/include /usr/X386/include /usr/X11R6/include /usr/X11R5/include /usr/include/X11R5 /usr/include/X11R4 /usr/openwin/include /usr/X11/include /usr/sww/include" - for i in $dirs ; do - if test -r $i/X11/Intrinsic.h; then - AC_MSG_RESULT([$i]) - XINCLUDES=" -I$i" - found_xincludes="yes" - break - fi - done - fi - else - if test "$x_includes" != ""; then - XINCLUDES="-I$x_includes" - found_xincludes="yes" - fi - fi - if test found_xincludes = "no"; then - AC_MSG_RESULT([couldn't find any!]) - fi - - if test "$no_x" = yes; then - AC_MSG_CHECKING([for X11 libraries]) - XLIBSW=nope - dirs="/usr/unsupported/lib /usr/local/lib /usr/X386/lib /usr/X11R6/lib /usr/X11R5/lib /usr/lib/X11R5 /usr/lib/X11R4 /usr/openwin/lib /usr/X11/lib /usr/sww/X11/lib" - for i in $dirs ; do - if test -r $i/libX11.a -o -r $i/libX11.so -o -r $i/libX11.sl -o -r $i/libX11.dylib; then - AC_MSG_RESULT([$i]) - XLIBSW="-L$i -lX11" - x_libraries="$i" - break - fi - done - else - if test "$x_libraries" = ""; then - XLIBSW=-lX11 - else - XLIBSW="-L$x_libraries -lX11" - fi - fi - if test "$XLIBSW" = nope ; then - AC_CHECK_LIB(Xwindow, XCreateWindow, XLIBSW=-lXwindow) - fi - if test "$XLIBSW" = nope ; then - AC_MSG_RESULT([could not find any! Using -lX11.]) - XLIBSW=-lX11 - fi - # TEA specific: - if test x"${XLIBSW}" != x ; then - PKG_LIBS="${PKG_LIBS} ${XLIBSW}" - fi -]) - -#-------------------------------------------------------------------- -# TEA_BLOCKING_STYLE -# -# The statements below check for systems where POSIX-style -# non-blocking I/O (O_NONBLOCK) doesn't work or is unimplemented. -# On these systems (mostly older ones), use the old BSD-style -# FIONBIO approach instead. -# -# Arguments: -# none -# -# Results: -# -# Defines some of the following vars: -# HAVE_SYS_IOCTL_H -# HAVE_SYS_FILIO_H -# USE_FIONBIO -# O_NONBLOCK -# -#-------------------------------------------------------------------- - -AC_DEFUN([TEA_BLOCKING_STYLE], [ - AC_CHECK_HEADERS(sys/ioctl.h) - AC_CHECK_HEADERS(sys/filio.h) - TEA_CONFIG_SYSTEM - AC_MSG_CHECKING([FIONBIO vs. O_NONBLOCK for nonblocking I/O]) - case $system in - # There used to be code here to use FIONBIO under AIX. However, it - # was reported that FIONBIO doesn't work under AIX 3.2.5. Since - # using O_NONBLOCK seems fine under AIX 4.*, I removed the FIONBIO - # code (JO, 5/31/97). - - OSF*) - AC_DEFINE(USE_FIONBIO, 1, [Should we use FIONBIO?]) - AC_MSG_RESULT([FIONBIO]) - ;; - SunOS-4*) - AC_DEFINE(USE_FIONBIO, 1, [Should we use FIONBIO?]) - AC_MSG_RESULT([FIONBIO]) - ;; - *) - AC_MSG_RESULT([O_NONBLOCK]) - ;; - esac -]) - -#-------------------------------------------------------------------- -# TEA_TIME_HANDLER -# -# Checks how the system deals with time.h, what time structures -# are used on the system, and what fields the structures have. -# -# Arguments: -# none -# -# Results: -# -# Defines some of the following vars: -# USE_DELTA_FOR_TZ -# HAVE_TM_GMTOFF -# HAVE_TM_TZADJ -# HAVE_TIMEZONE_VAR -# -#-------------------------------------------------------------------- - -AC_DEFUN([TEA_TIME_HANDLER], [ - AC_CHECK_HEADERS(sys/time.h) - AC_HEADER_TIME - AC_STRUCT_TIMEZONE - - AC_CHECK_FUNCS(gmtime_r localtime_r) - - AC_CACHE_CHECK([tm_tzadj in struct tm], tcl_cv_member_tm_tzadj, [ - AC_TRY_COMPILE([#include ], [struct tm tm; tm.tm_tzadj;], - tcl_cv_member_tm_tzadj=yes, tcl_cv_member_tm_tzadj=no)]) - if test $tcl_cv_member_tm_tzadj = yes ; then - AC_DEFINE(HAVE_TM_TZADJ, 1, [Should we use the tm_tzadj field of struct tm?]) - fi - - AC_CACHE_CHECK([tm_gmtoff in struct tm], tcl_cv_member_tm_gmtoff, [ - AC_TRY_COMPILE([#include ], [struct tm tm; tm.tm_gmtoff;], - tcl_cv_member_tm_gmtoff=yes, tcl_cv_member_tm_gmtoff=no)]) - if test $tcl_cv_member_tm_gmtoff = yes ; then - AC_DEFINE(HAVE_TM_GMTOFF, 1, [Should we use the tm_gmtoff field of struct tm?]) - fi - - # - # Its important to include time.h in this check, as some systems - # (like convex) have timezone functions, etc. - # - AC_CACHE_CHECK([long timezone variable], tcl_cv_timezone_long, [ - AC_TRY_COMPILE([#include ], - [extern long timezone; - timezone += 1; - exit (0);], - tcl_cv_timezone_long=yes, tcl_cv_timezone_long=no)]) - if test $tcl_cv_timezone_long = yes ; then - AC_DEFINE(HAVE_TIMEZONE_VAR, 1, [Should we use the global timezone variable?]) - else - # - # On some systems (eg IRIX 6.2), timezone is a time_t and not a long. - # - AC_CACHE_CHECK([time_t timezone variable], tcl_cv_timezone_time, [ - AC_TRY_COMPILE([#include ], - [extern time_t timezone; - timezone += 1; - exit (0);], - tcl_cv_timezone_time=yes, tcl_cv_timezone_time=no)]) - if test $tcl_cv_timezone_time = yes ; then - AC_DEFINE(HAVE_TIMEZONE_VAR, 1, [Should we use the global timezone variable?]) - fi - fi -]) - -#-------------------------------------------------------------------- -# TEA_BUGGY_STRTOD -# -# Under Solaris 2.4, strtod returns the wrong value for the -# terminating character under some conditions. Check for this -# and if the problem exists use a substitute procedure -# "fixstrtod" (provided by Tcl) that corrects the error. -# Also, on Compaq's Tru64 Unix 5.0, -# strtod(" ") returns 0.0 instead of a failure to convert. -# -# Arguments: -# none -# -# Results: -# -# Might defines some of the following vars: -# strtod (=fixstrtod) -# -#-------------------------------------------------------------------- - -AC_DEFUN([TEA_BUGGY_STRTOD], [ - AC_CHECK_FUNC(strtod, tcl_strtod=1, tcl_strtod=0) - if test "$tcl_strtod" = 1; then - AC_CACHE_CHECK([for Solaris2.4/Tru64 strtod bugs], tcl_cv_strtod_buggy,[ - AC_TRY_RUN([ - extern double strtod(); - int main() { - char *infString="Inf", *nanString="NaN", *spaceString=" "; - char *term; - double value; - value = strtod(infString, &term); - if ((term != infString) && (term[-1] == 0)) { - exit(1); - } - value = strtod(nanString, &term); - if ((term != nanString) && (term[-1] == 0)) { - exit(1); - } - value = strtod(spaceString, &term); - if (term == (spaceString+1)) { - exit(1); - } - exit(0); - }], tcl_cv_strtod_buggy=ok, tcl_cv_strtod_buggy=buggy, - tcl_cv_strtod_buggy=buggy)]) - if test "$tcl_cv_strtod_buggy" = buggy; then - AC_LIBOBJ([fixstrtod]) - USE_COMPAT=1 - AC_DEFINE(strtod, fixstrtod, [Do we want to use the strtod() in compat?]) - fi - fi -]) - -#-------------------------------------------------------------------- -# TEA_TCL_LINK_LIBS -# -# Search for the libraries needed to link the Tcl shell. -# Things like the math library (-lm) and socket stuff (-lsocket vs. -# -lnsl) are dealt with here. -# -# Arguments: -# Requires the following vars to be set in the Makefile: -# DL_LIBS -# LIBS -# MATH_LIBS -# -# Results: -# -# Subst's the following var: -# TCL_LIBS -# MATH_LIBS -# -# Might append to the following vars: -# LIBS -# -# Might define the following vars: -# HAVE_NET_ERRNO_H -# -#-------------------------------------------------------------------- - -AC_DEFUN([TEA_TCL_LINK_LIBS], [ - #-------------------------------------------------------------------- - # On a few very rare systems, all of the libm.a stuff is - # already in libc.a. Set compiler flags accordingly. - # Also, Linux requires the "ieee" library for math to work - # right (and it must appear before "-lm"). - #-------------------------------------------------------------------- - - AC_CHECK_FUNC(sin, MATH_LIBS="", MATH_LIBS="-lm") - AC_CHECK_LIB(ieee, main, [MATH_LIBS="-lieee $MATH_LIBS"]) - - #-------------------------------------------------------------------- - # Interactive UNIX requires -linet instead of -lsocket, plus it - # needs net/errno.h to define the socket-related error codes. - #-------------------------------------------------------------------- - - AC_CHECK_LIB(inet, main, [LIBS="$LIBS -linet"]) - AC_CHECK_HEADER(net/errno.h, [ - AC_DEFINE(HAVE_NET_ERRNO_H, 1, [Do we have ?])]) - - #-------------------------------------------------------------------- - # Check for the existence of the -lsocket and -lnsl libraries. - # The order here is important, so that they end up in the right - # order in the command line generated by make. Here are some - # special considerations: - # 1. Use "connect" and "accept" to check for -lsocket, and - # "gethostbyname" to check for -lnsl. - # 2. Use each function name only once: can't redo a check because - # autoconf caches the results of the last check and won't redo it. - # 3. Use -lnsl and -lsocket only if they supply procedures that - # aren't already present in the normal libraries. This is because - # IRIX 5.2 has libraries, but they aren't needed and they're - # bogus: they goof up name resolution if used. - # 4. On some SVR4 systems, can't use -lsocket without -lnsl too. - # To get around this problem, check for both libraries together - # if -lsocket doesn't work by itself. - #-------------------------------------------------------------------- - - tcl_checkBoth=0 - AC_CHECK_FUNC(connect, tcl_checkSocket=0, tcl_checkSocket=1) - if test "$tcl_checkSocket" = 1; then - AC_CHECK_FUNC(setsockopt, , [AC_CHECK_LIB(socket, setsockopt, - LIBS="$LIBS -lsocket", tcl_checkBoth=1)]) - fi - if test "$tcl_checkBoth" = 1; then - tk_oldLibs=$LIBS - LIBS="$LIBS -lsocket -lnsl" - AC_CHECK_FUNC(accept, tcl_checkNsl=0, [LIBS=$tk_oldLibs]) - fi - AC_CHECK_FUNC(gethostbyname, , [AC_CHECK_LIB(nsl, gethostbyname, - [LIBS="$LIBS -lnsl"])]) - - # TEA specific: Don't perform the eval of the libraries here because - # DL_LIBS won't be set until we call TEA_CONFIG_CFLAGS - - TCL_LIBS='${DL_LIBS} ${LIBS} ${MATH_LIBS}' - AC_SUBST(TCL_LIBS) - AC_SUBST(MATH_LIBS) -]) - -#-------------------------------------------------------------------- -# TEA_TCL_EARLY_FLAGS -# -# Check for what flags are needed to be passed so the correct OS -# features are available. -# -# Arguments: -# None -# -# Results: -# -# Might define the following vars: -# _ISOC99_SOURCE -# _LARGEFILE64_SOURCE -# _LARGEFILE_SOURCE64 -# -#-------------------------------------------------------------------- - -AC_DEFUN([TEA_TCL_EARLY_FLAG],[ - AC_CACHE_VAL([tcl_cv_flag_]translit($1,[A-Z],[a-z]), - AC_TRY_COMPILE([$2], $3, [tcl_cv_flag_]translit($1,[A-Z],[a-z])=no, - AC_TRY_COMPILE([[#define ]$1[ 1 -]$2], $3, - [tcl_cv_flag_]translit($1,[A-Z],[a-z])=yes, - [tcl_cv_flag_]translit($1,[A-Z],[a-z])=no))) - if test ["x${tcl_cv_flag_]translit($1,[A-Z],[a-z])[}" = "xyes"] ; then - AC_DEFINE($1, 1, [Add the ]$1[ flag when building]) - tcl_flags="$tcl_flags $1" - fi -]) - -AC_DEFUN([TEA_TCL_EARLY_FLAGS],[ - AC_MSG_CHECKING([for required early compiler flags]) - tcl_flags="" - TEA_TCL_EARLY_FLAG(_ISOC99_SOURCE,[#include ], - [char *p = (char *)strtoll; char *q = (char *)strtoull;]) - TEA_TCL_EARLY_FLAG(_LARGEFILE64_SOURCE,[#include ], - [struct stat64 buf; int i = stat64("/", &buf);]) - TEA_TCL_EARLY_FLAG(_LARGEFILE_SOURCE64,[#include ], - [char *p = (char *)open64;]) - if test "x${tcl_flags}" = "x" ; then - AC_MSG_RESULT([none]) - else - AC_MSG_RESULT([${tcl_flags}]) - fi -]) - -#-------------------------------------------------------------------- -# TEA_TCL_64BIT_FLAGS -# -# Check for what is defined in the way of 64-bit features. -# -# Arguments: -# None -# -# Results: -# -# Might define the following vars: -# TCL_WIDE_INT_IS_LONG -# TCL_WIDE_INT_TYPE -# HAVE_STRUCT_DIRENT64 -# HAVE_STRUCT_STAT64 -# HAVE_TYPE_OFF64_T -# -#-------------------------------------------------------------------- - -AC_DEFUN([TEA_TCL_64BIT_FLAGS], [ - AC_MSG_CHECKING([for 64-bit integer type]) - AC_CACHE_VAL(tcl_cv_type_64bit,[ - tcl_cv_type_64bit=none - # See if the compiler knows natively about __int64 - AC_TRY_COMPILE(,[__int64 value = (__int64) 0;], - tcl_type_64bit=__int64, tcl_type_64bit="long long") - # See if we should use long anyway Note that we substitute in the - # type that is our current guess for a 64-bit type inside this check - # program, so it should be modified only carefully... - AC_TRY_COMPILE(,[switch (0) { - case 1: case (sizeof(]${tcl_type_64bit}[)==sizeof(long)): ; - }],tcl_cv_type_64bit=${tcl_type_64bit})]) - if test "${tcl_cv_type_64bit}" = none ; then - AC_DEFINE(TCL_WIDE_INT_IS_LONG, 1, [Are wide integers to be implemented with C 'long's?]) - AC_MSG_RESULT([using long]) - elif test "${tcl_cv_type_64bit}" = "__int64" \ - -a "${TEA_PLATFORM}" = "windows" ; then - # TEA specific: We actually want to use the default tcl.h checks in - # this case to handle both TCL_WIDE_INT_TYPE and TCL_LL_MODIFIER* - AC_MSG_RESULT([using Tcl header defaults]) - else - AC_DEFINE_UNQUOTED(TCL_WIDE_INT_TYPE,${tcl_cv_type_64bit}, - [What type should be used to define wide integers?]) - AC_MSG_RESULT([${tcl_cv_type_64bit}]) - - # Now check for auxiliary declarations - AC_CACHE_CHECK([for struct dirent64], tcl_cv_struct_dirent64,[ - AC_TRY_COMPILE([#include -#include ],[struct dirent64 p;], - tcl_cv_struct_dirent64=yes,tcl_cv_struct_dirent64=no)]) - if test "x${tcl_cv_struct_dirent64}" = "xyes" ; then - AC_DEFINE(HAVE_STRUCT_DIRENT64, 1, [Is 'struct dirent64' in ?]) - fi - - AC_CACHE_CHECK([for struct stat64], tcl_cv_struct_stat64,[ - AC_TRY_COMPILE([#include ],[struct stat64 p; -], - tcl_cv_struct_stat64=yes,tcl_cv_struct_stat64=no)]) - if test "x${tcl_cv_struct_stat64}" = "xyes" ; then - AC_DEFINE(HAVE_STRUCT_STAT64, 1, [Is 'struct stat64' in ?]) - fi - - AC_CHECK_FUNCS(open64 lseek64) - AC_MSG_CHECKING([for off64_t]) - AC_CACHE_VAL(tcl_cv_type_off64_t,[ - AC_TRY_COMPILE([#include ],[off64_t offset; -], - tcl_cv_type_off64_t=yes,tcl_cv_type_off64_t=no)]) - dnl Define HAVE_TYPE_OFF64_T only when the off64_t type and the - dnl functions lseek64 and open64 are defined. - if test "x${tcl_cv_type_off64_t}" = "xyes" && \ - test "x${ac_cv_func_lseek64}" = "xyes" && \ - test "x${ac_cv_func_open64}" = "xyes" ; then - AC_DEFINE(HAVE_TYPE_OFF64_T, 1, [Is off64_t in ?]) - AC_MSG_RESULT([yes]) - else - AC_MSG_RESULT([no]) - fi - fi -]) - -## -## Here ends the standard Tcl configuration bits and starts the -## TEA specific functions -## - -#------------------------------------------------------------------------ -# TEA_INIT -- -# -# Init various Tcl Extension Architecture (TEA) variables. -# This should be the first called TEA_* macro. -# -# Arguments: -# none -# -# Results: -# -# Defines and substs the following vars: -# CYGPATH -# EXEEXT -# Defines only: -# TEA_VERSION -# TEA_INITED -# TEA_PLATFORM (windows or unix) -# -# "cygpath" is used on windows to generate native path names for include -# files. These variables should only be used with the compiler and linker -# since they generate native path names. -# -# EXEEXT -# Select the executable extension based on the host type. This -# is a lightweight replacement for AC_EXEEXT that doesn't require -# a compiler. -#------------------------------------------------------------------------ - -AC_DEFUN([TEA_INIT], [ - # TEA extensions pass this us the version of TEA they think they - # are compatible with. - TEA_VERSION="3.8" - - AC_MSG_CHECKING([for correct TEA configuration]) - if test x"${PACKAGE_NAME}" = x ; then - AC_MSG_ERROR([ -The PACKAGE_NAME variable must be defined by your TEA configure.in]) - fi - if test x"$1" = x ; then - AC_MSG_ERROR([ -TEA version not specified.]) - elif test "$1" != "${TEA_VERSION}" ; then - AC_MSG_RESULT([warning: requested TEA version "$1", have "${TEA_VERSION}"]) - else - AC_MSG_RESULT([ok (TEA ${TEA_VERSION})]) - fi - case "`uname -s`" in - *win32*|*WIN32*|*MINGW32_*) - AC_CHECK_PROG(CYGPATH, cygpath, cygpath -w, echo) - EXEEXT=".exe" - TEA_PLATFORM="windows" - ;; - *CYGWIN_*) - CYGPATH=echo - EXEEXT=".exe" - # TEA_PLATFORM is determined later - ;; - *) - CYGPATH=echo - EXEEXT="" - TEA_PLATFORM="unix" - ;; - esac - - # Check if exec_prefix is set. If not use fall back to prefix. - # Note when adjusted, so that TEA_PREFIX can correct for this. - # This is needed for recursive configures, since autoconf propagates - # $prefix, but not $exec_prefix (doh!). - if test x$exec_prefix = xNONE ; then - exec_prefix_default=yes - exec_prefix=$prefix - fi - - AC_SUBST(EXEEXT) - AC_SUBST(CYGPATH) - - # This package name must be replaced statically for AC_SUBST to work - AC_SUBST(PKG_LIB_FILE) - # Substitute STUB_LIB_FILE in case package creates a stub library too. - AC_SUBST(PKG_STUB_LIB_FILE) - - # We AC_SUBST these here to ensure they are subst'ed, - # in case the user doesn't call TEA_ADD_... - AC_SUBST(PKG_STUB_SOURCES) - AC_SUBST(PKG_STUB_OBJECTS) - AC_SUBST(PKG_TCL_SOURCES) - AC_SUBST(PKG_HEADERS) - AC_SUBST(PKG_INCLUDES) - AC_SUBST(PKG_LIBS) - AC_SUBST(PKG_CFLAGS) -]) - -#------------------------------------------------------------------------ -# TEA_ADD_SOURCES -- -# -# Specify one or more source files. Users should check for -# the right platform before adding to their list. -# It is not important to specify the directory, as long as it is -# in the generic, win or unix subdirectory of $(srcdir). -# -# Arguments: -# one or more file names -# -# Results: -# -# Defines and substs the following vars: -# PKG_SOURCES -# PKG_OBJECTS -#------------------------------------------------------------------------ -AC_DEFUN([TEA_ADD_SOURCES], [ - vars="$@" - for i in $vars; do - case $i in - [\$]*) - # allow $-var names - PKG_SOURCES="$PKG_SOURCES $i" - PKG_OBJECTS="$PKG_OBJECTS $i" - ;; - *) - # check for existence - allows for generic/win/unix VPATH - # To add more dirs here (like 'src'), you have to update VPATH - # in Makefile.in as well - if test ! -f "${srcdir}/$i" -a ! -f "${srcdir}/generic/$i" \ - -a ! -f "${srcdir}/win/$i" -a ! -f "${srcdir}/unix/$i" \ - ; then - AC_MSG_ERROR([could not find source file '$i']) - fi - PKG_SOURCES="$PKG_SOURCES $i" - # this assumes it is in a VPATH dir - i=`basename $i` - # handle user calling this before or after TEA_SETUP_COMPILER - if test x"${OBJEXT}" != x ; then - j="`echo $i | sed -e 's/\.[[^.]]*$//'`.${OBJEXT}" - else - j="`echo $i | sed -e 's/\.[[^.]]*$//'`.\${OBJEXT}" - fi - PKG_OBJECTS="$PKG_OBJECTS $j" - ;; - esac - done - AC_SUBST(PKG_SOURCES) - AC_SUBST(PKG_OBJECTS) -]) - -#------------------------------------------------------------------------ -# TEA_ADD_STUB_SOURCES -- -# -# Specify one or more source files. Users should check for -# the right platform before adding to their list. -# It is not important to specify the directory, as long as it is -# in the generic, win or unix subdirectory of $(srcdir). -# -# Arguments: -# one or more file names -# -# Results: -# -# Defines and substs the following vars: -# PKG_STUB_SOURCES -# PKG_STUB_OBJECTS -#------------------------------------------------------------------------ -AC_DEFUN([TEA_ADD_STUB_SOURCES], [ - vars="$@" - for i in $vars; do - # check for existence - allows for generic/win/unix VPATH - if test ! -f "${srcdir}/$i" -a ! -f "${srcdir}/generic/$i" \ - -a ! -f "${srcdir}/win/$i" -a ! -f "${srcdir}/unix/$i" \ - ; then - AC_MSG_ERROR([could not find stub source file '$i']) - fi - PKG_STUB_SOURCES="$PKG_STUB_SOURCES $i" - # this assumes it is in a VPATH dir - i=`basename $i` - # handle user calling this before or after TEA_SETUP_COMPILER - if test x"${OBJEXT}" != x ; then - j="`echo $i | sed -e 's/\.[[^.]]*$//'`.${OBJEXT}" - else - j="`echo $i | sed -e 's/\.[[^.]]*$//'`.\${OBJEXT}" - fi - PKG_STUB_OBJECTS="$PKG_STUB_OBJECTS $j" - done - AC_SUBST(PKG_STUB_SOURCES) - AC_SUBST(PKG_STUB_OBJECTS) -]) - -#------------------------------------------------------------------------ -# TEA_ADD_TCL_SOURCES -- -# -# Specify one or more Tcl source files. These should be platform -# independent runtime files. -# -# Arguments: -# one or more file names -# -# Results: -# -# Defines and substs the following vars: -# PKG_TCL_SOURCES -#------------------------------------------------------------------------ -AC_DEFUN([TEA_ADD_TCL_SOURCES], [ - vars="$@" - for i in $vars; do - # check for existence, be strict because it is installed - if test ! -f "${srcdir}/$i" ; then - AC_MSG_ERROR([could not find tcl source file '${srcdir}/$i']) - fi - PKG_TCL_SOURCES="$PKG_TCL_SOURCES $i" - done - AC_SUBST(PKG_TCL_SOURCES) -]) - -#------------------------------------------------------------------------ -# TEA_ADD_HEADERS -- -# -# Specify one or more source headers. Users should check for -# the right platform before adding to their list. -# -# Arguments: -# one or more file names -# -# Results: -# -# Defines and substs the following vars: -# PKG_HEADERS -#------------------------------------------------------------------------ -AC_DEFUN([TEA_ADD_HEADERS], [ - vars="$@" - for i in $vars; do - # check for existence, be strict because it is installed - if test ! -f "${srcdir}/$i" ; then - AC_MSG_ERROR([could not find header file '${srcdir}/$i']) - fi - PKG_HEADERS="$PKG_HEADERS $i" - done - AC_SUBST(PKG_HEADERS) -]) - -#------------------------------------------------------------------------ -# TEA_ADD_INCLUDES -- -# -# Specify one or more include dirs. Users should check for -# the right platform before adding to their list. -# -# Arguments: -# one or more file names -# -# Results: -# -# Defines and substs the following vars: -# PKG_INCLUDES -#------------------------------------------------------------------------ -AC_DEFUN([TEA_ADD_INCLUDES], [ - vars="$@" - for i in $vars; do - PKG_INCLUDES="$PKG_INCLUDES $i" - done - AC_SUBST(PKG_INCLUDES) -]) - -#------------------------------------------------------------------------ -# TEA_ADD_LIBS -- -# -# Specify one or more libraries. Users should check for -# the right platform before adding to their list. For Windows, -# libraries provided in "foo.lib" format will be converted to -# "-lfoo" when using GCC (mingw). -# -# Arguments: -# one or more file names -# -# Results: -# -# Defines and substs the following vars: -# PKG_LIBS -#------------------------------------------------------------------------ -AC_DEFUN([TEA_ADD_LIBS], [ - vars="$@" - for i in $vars; do - if test "${TEA_PLATFORM}" = "windows" -a "$GCC" = "yes" ; then - # Convert foo.lib to -lfoo for GCC. No-op if not *.lib - i=`echo "$i" | sed -e 's/^\([[^-]].*\)\.lib[$]/-l\1/i'` - fi - PKG_LIBS="$PKG_LIBS $i" - done - AC_SUBST(PKG_LIBS) -]) - -#------------------------------------------------------------------------ -# TEA_ADD_CFLAGS -- -# -# Specify one or more CFLAGS. Users should check for -# the right platform before adding to their list. -# -# Arguments: -# one or more file names -# -# Results: -# -# Defines and substs the following vars: -# PKG_CFLAGS -#------------------------------------------------------------------------ -AC_DEFUN([TEA_ADD_CFLAGS], [ - PKG_CFLAGS="$PKG_CFLAGS $@" - AC_SUBST(PKG_CFLAGS) -]) - -#------------------------------------------------------------------------ -# TEA_PREFIX -- -# -# Handle the --prefix=... option by defaulting to what Tcl gave -# -# Arguments: -# none -# -# Results: -# -# If --prefix or --exec-prefix was not specified, $prefix and -# $exec_prefix will be set to the values given to Tcl when it was -# configured. -#------------------------------------------------------------------------ -AC_DEFUN([TEA_PREFIX], [ - if test "${prefix}" = "NONE"; then - prefix_default=yes - if test x"${TCL_PREFIX}" != x; then - AC_MSG_NOTICE([--prefix defaulting to TCL_PREFIX ${TCL_PREFIX}]) - prefix=${TCL_PREFIX} - else - AC_MSG_NOTICE([--prefix defaulting to /usr/local]) - prefix=/usr/local - fi - fi - if test "${exec_prefix}" = "NONE" -a x"${prefix_default}" = x"yes" \ - -o x"${exec_prefix_default}" = x"yes" ; then - if test x"${TCL_EXEC_PREFIX}" != x; then - AC_MSG_NOTICE([--exec-prefix defaulting to TCL_EXEC_PREFIX ${TCL_EXEC_PREFIX}]) - exec_prefix=${TCL_EXEC_PREFIX} - else - AC_MSG_NOTICE([--exec-prefix defaulting to ${prefix}]) - exec_prefix=$prefix - fi - fi -]) - -#------------------------------------------------------------------------ -# TEA_SETUP_COMPILER_CC -- -# -# Do compiler checks the way we want. This is just a replacement -# for AC_PROG_CC in TEA configure.in files to make them cleaner. -# -# Arguments: -# none -# -# Results: -# -# Sets up CC var and other standard bits we need to make executables. -#------------------------------------------------------------------------ -AC_DEFUN([TEA_SETUP_COMPILER_CC], [ - # Don't put any macros that use the compiler (e.g. AC_TRY_COMPILE) - # in this macro, they need to go into TEA_SETUP_COMPILER instead. - - # If the user did not set CFLAGS, set it now to keep - # the AC_PROG_CC macro from adding "-g -O2". - if test "${CFLAGS+set}" != "set" ; then - CFLAGS="" - fi - - AC_PROG_CC - AC_PROG_CPP - - AC_PROG_INSTALL - - #-------------------------------------------------------------------- - # Checks to see if the make program sets the $MAKE variable. - #-------------------------------------------------------------------- - - AC_PROG_MAKE_SET - - #-------------------------------------------------------------------- - # Find ranlib - #-------------------------------------------------------------------- - - AC_PROG_RANLIB - - #-------------------------------------------------------------------- - # Determines the correct binary file extension (.o, .obj, .exe etc.) - #-------------------------------------------------------------------- - - AC_OBJEXT - AC_EXEEXT -]) - -#------------------------------------------------------------------------ -# TEA_SETUP_COMPILER -- -# -# Do compiler checks that use the compiler. This must go after -# TEA_SETUP_COMPILER_CC, which does the actual compiler check. -# -# Arguments: -# none -# -# Results: -# -# Sets up CC var and other standard bits we need to make executables. -#------------------------------------------------------------------------ -AC_DEFUN([TEA_SETUP_COMPILER], [ - # Any macros that use the compiler (e.g. AC_TRY_COMPILE) have to go here. - AC_REQUIRE([TEA_SETUP_COMPILER_CC]) - - #------------------------------------------------------------------------ - # If we're using GCC, see if the compiler understands -pipe. If so, use it. - # It makes compiling go faster. (This is only a performance feature.) - #------------------------------------------------------------------------ - - if test -z "$no_pipe" -a -n "$GCC"; then - AC_CACHE_CHECK([if the compiler understands -pipe], - tcl_cv_cc_pipe, [ - hold_cflags=$CFLAGS; CFLAGS="$CFLAGS -pipe" - AC_TRY_COMPILE(,, tcl_cv_cc_pipe=yes, tcl_cv_cc_pipe=no) - CFLAGS=$hold_cflags]) - if test $tcl_cv_cc_pipe = yes; then - CFLAGS="$CFLAGS -pipe" - fi - fi - - #-------------------------------------------------------------------- - # Common compiler flag setup - #-------------------------------------------------------------------- - - AC_C_BIGENDIAN - if test "${TEA_PLATFORM}" = "unix" ; then - TEA_TCL_LINK_LIBS - TEA_MISSING_POSIX_HEADERS - # Let the user call this, because if it triggers, they will - # need a compat/strtod.c that is correct. Users can also - # use Tcl_GetDouble(FromObj) instead. - #TEA_BUGGY_STRTOD - fi -]) - -#------------------------------------------------------------------------ -# TEA_MAKE_LIB -- -# -# Generate a line that can be used to build a shared/unshared library -# in a platform independent manner. -# -# Arguments: -# none -# -# Requires: -# -# Results: -# -# Defines the following vars: -# CFLAGS - Done late here to note disturb other AC macros -# MAKE_LIB - Command to execute to build the Tcl library; -# differs depending on whether or not Tcl is being -# compiled as a shared library. -# MAKE_SHARED_LIB Makefile rule for building a shared library -# MAKE_STATIC_LIB Makefile rule for building a static library -# MAKE_STUB_LIB Makefile rule for building a stub library -#------------------------------------------------------------------------ - -AC_DEFUN([TEA_MAKE_LIB], [ - if test "${TEA_PLATFORM}" = "windows" -a "$GCC" != "yes"; then - MAKE_STATIC_LIB="\${STLIB_LD} -out:\[$]@ \$(PKG_OBJECTS)" - MAKE_SHARED_LIB="\${SHLIB_LD} \${SHLIB_LD_LIBS} \${LDFLAGS_DEFAULT} -out:\[$]@ \$(PKG_OBJECTS)" - MAKE_STUB_LIB="\${STLIB_LD} -out:\[$]@ \$(PKG_STUB_OBJECTS)" - else - MAKE_STATIC_LIB="\${STLIB_LD} \[$]@ \$(PKG_OBJECTS)" - MAKE_SHARED_LIB="\${SHLIB_LD} -o \[$]@ \$(PKG_OBJECTS) \${SHLIB_LD_LIBS}" - MAKE_STUB_LIB="\${STLIB_LD} \[$]@ \$(PKG_STUB_OBJECTS)" - fi - - if test "${SHARED_BUILD}" = "1" ; then - MAKE_LIB="${MAKE_SHARED_LIB} " - else - MAKE_LIB="${MAKE_STATIC_LIB} " - fi - - #-------------------------------------------------------------------- - # Shared libraries and static libraries have different names. - # Use the double eval to make sure any variables in the suffix is - # substituted. (@@@ Might not be necessary anymore) - #-------------------------------------------------------------------- - - if test "${TEA_PLATFORM}" = "windows" ; then - if test "${SHARED_BUILD}" = "1" ; then - # We force the unresolved linking of symbols that are really in - # the private libraries of Tcl and Tk. - SHLIB_LD_LIBS="${SHLIB_LD_LIBS} \"`${CYGPATH} ${TCL_BIN_DIR}/${TCL_STUB_LIB_FILE}`\"" - if test x"${TK_BIN_DIR}" != x ; then - SHLIB_LD_LIBS="${SHLIB_LD_LIBS} \"`${CYGPATH} ${TK_BIN_DIR}/${TK_STUB_LIB_FILE}`\"" - fi - eval eval "PKG_LIB_FILE=${PACKAGE_NAME}${SHARED_LIB_SUFFIX}" - else - eval eval "PKG_LIB_FILE=${PACKAGE_NAME}${UNSHARED_LIB_SUFFIX}" - fi - # Some packages build their own stubs libraries - eval eval "PKG_STUB_LIB_FILE=${PACKAGE_NAME}stub${UNSHARED_LIB_SUFFIX}" - if test "$GCC" = "yes"; then - PKG_STUB_LIB_FILE=lib${PKG_STUB_LIB_FILE} - fi - # These aren't needed on Windows (either MSVC or gcc) - RANLIB=: - RANLIB_STUB=: - else - RANLIB_STUB="${RANLIB}" - if test "${SHARED_BUILD}" = "1" ; then - SHLIB_LD_LIBS="${SHLIB_LD_LIBS} ${TCL_STUB_LIB_SPEC}" - if test x"${TK_BIN_DIR}" != x ; then - SHLIB_LD_LIBS="${SHLIB_LD_LIBS} ${TK_STUB_LIB_SPEC}" - fi - eval eval "PKG_LIB_FILE=lib${PACKAGE_NAME}${SHARED_LIB_SUFFIX}" - RANLIB=: - else - eval eval "PKG_LIB_FILE=lib${PACKAGE_NAME}${UNSHARED_LIB_SUFFIX}" - fi - # Some packages build their own stubs libraries - eval eval "PKG_STUB_LIB_FILE=lib${PACKAGE_NAME}stub${UNSHARED_LIB_SUFFIX}" - fi - - # These are escaped so that only CFLAGS is picked up at configure time. - # The other values will be substituted at make time. - CFLAGS="${CFLAGS} \${CFLAGS_DEFAULT} \${CFLAGS_WARNING}" - if test "${SHARED_BUILD}" = "1" ; then - CFLAGS="${CFLAGS} \${SHLIB_CFLAGS}" - fi - - AC_SUBST(MAKE_LIB) - AC_SUBST(MAKE_SHARED_LIB) - AC_SUBST(MAKE_STATIC_LIB) - AC_SUBST(MAKE_STUB_LIB) - AC_SUBST(RANLIB_STUB) -]) - -#------------------------------------------------------------------------ -# TEA_LIB_SPEC -- -# -# Compute the name of an existing object library located in libdir -# from the given base name and produce the appropriate linker flags. -# -# Arguments: -# basename The base name of the library without version -# numbers, extensions, or "lib" prefixes. -# extra_dir Extra directory in which to search for the -# library. This location is used first, then -# $prefix/$exec-prefix, then some defaults. -# -# Requires: -# TEA_INIT and TEA_PREFIX must be called first. -# -# Results: -# -# Defines the following vars: -# ${basename}_LIB_NAME The computed library name. -# ${basename}_LIB_SPEC The computed linker flags. -#------------------------------------------------------------------------ - -AC_DEFUN([TEA_LIB_SPEC], [ - AC_MSG_CHECKING([for $1 library]) - - # Look in exec-prefix for the library (defined by TEA_PREFIX). - - tea_lib_name_dir="${exec_prefix}/lib" - - # Or in a user-specified location. - - if test x"$2" != x ; then - tea_extra_lib_dir=$2 - else - tea_extra_lib_dir=NONE - fi - - for i in \ - `ls -dr ${tea_extra_lib_dir}/$1[[0-9]]*.lib 2>/dev/null ` \ - `ls -dr ${tea_extra_lib_dir}/lib$1[[0-9]]* 2>/dev/null ` \ - `ls -dr ${tea_lib_name_dir}/$1[[0-9]]*.lib 2>/dev/null ` \ - `ls -dr ${tea_lib_name_dir}/lib$1[[0-9]]* 2>/dev/null ` \ - `ls -dr /usr/lib/$1[[0-9]]*.lib 2>/dev/null ` \ - `ls -dr /usr/lib/lib$1[[0-9]]* 2>/dev/null ` \ - `ls -dr /usr/local/lib/$1[[0-9]]*.lib 2>/dev/null ` \ - `ls -dr /usr/local/lib/lib$1[[0-9]]* 2>/dev/null ` ; do - if test -f "$i" ; then - tea_lib_name_dir=`dirname $i` - $1_LIB_NAME=`basename $i` - $1_LIB_PATH_NAME=$i - break - fi - done - - if test "${TEA_PLATFORM}" = "windows"; then - $1_LIB_SPEC=\"`${CYGPATH} ${$1_LIB_PATH_NAME} 2>/dev/null`\" - else - # Strip off the leading "lib" and trailing ".a" or ".so" - - tea_lib_name_lib=`echo ${$1_LIB_NAME}|sed -e 's/^lib//' -e 's/\.[[^.]]*$//' -e 's/\.so.*//'` - $1_LIB_SPEC="-L${tea_lib_name_dir} -l${tea_lib_name_lib}" - fi - - if test "x${$1_LIB_NAME}" = x ; then - AC_MSG_ERROR([not found]) - else - AC_MSG_RESULT([${$1_LIB_SPEC}]) - fi -]) - -#------------------------------------------------------------------------ -# TEA_PRIVATE_TCL_HEADERS -- -# -# Locate the private Tcl include files -# -# Arguments: -# -# Requires: -# TCL_SRC_DIR Assumes that TEA_LOAD_TCLCONFIG has -# already been called. -# -# Results: -# -# Substs the following vars: -# TCL_TOP_DIR_NATIVE -# TCL_INCLUDES -#------------------------------------------------------------------------ - -AC_DEFUN([TEA_PRIVATE_TCL_HEADERS], [ - # Allow for --with-tclinclude to take effect and define ${ac_cv_c_tclh} - AC_REQUIRE([TEA_PUBLIC_TCL_HEADERS]) - AC_MSG_CHECKING([for Tcl private include files]) - - TCL_SRC_DIR_NATIVE=`${CYGPATH} ${TCL_SRC_DIR}` - TCL_TOP_DIR_NATIVE=\"${TCL_SRC_DIR_NATIVE}\" - - # Check to see if tclPort.h isn't already with the public headers - # Don't look for tclInt.h because that resides with tcl.h in the core - # sources, but the Port headers are in a different directory - if test "${TEA_PLATFORM}" = "windows" -a \ - -f "${ac_cv_c_tclh}/tclWinPort.h"; then - result="private headers found with public headers" - elif test "${TEA_PLATFORM}" = "unix" -a \ - -f "${ac_cv_c_tclh}/tclUnixPort.h"; then - result="private headers found with public headers" - else - TCL_GENERIC_DIR_NATIVE=\"${TCL_SRC_DIR_NATIVE}/generic\" - if test "${TEA_PLATFORM}" = "windows"; then - TCL_PLATFORM_DIR_NATIVE=\"${TCL_SRC_DIR_NATIVE}/win\" - else - TCL_PLATFORM_DIR_NATIVE=\"${TCL_SRC_DIR_NATIVE}/unix\" - fi - # Overwrite the previous TCL_INCLUDES as this should capture both - # public and private headers in the same set. - # We want to ensure these are substituted so as not to require - # any *_NATIVE vars be defined in the Makefile - TCL_INCLUDES="-I${TCL_GENERIC_DIR_NATIVE} -I${TCL_PLATFORM_DIR_NATIVE}" - if test "`uname -s`" = "Darwin"; then - # If Tcl was built as a framework, attempt to use - # the framework's Headers and PrivateHeaders directories - case ${TCL_DEFS} in - *TCL_FRAMEWORK*) - if test -d "${TCL_BIN_DIR}/Headers" -a \ - -d "${TCL_BIN_DIR}/PrivateHeaders"; then - TCL_INCLUDES="-I\"${TCL_BIN_DIR}/Headers\" -I\"${TCL_BIN_DIR}/PrivateHeaders\" ${TCL_INCLUDES}" - else - TCL_INCLUDES="${TCL_INCLUDES} ${TCL_INCLUDE_SPEC} `echo "${TCL_INCLUDE_SPEC}" | sed -e 's/Headers/PrivateHeaders/'`" - fi - ;; - esac - result="Using ${TCL_INCLUDES}" - else - if test ! -f "${TCL_SRC_DIR}/generic/tclInt.h" ; then - AC_MSG_ERROR([Cannot find private header tclInt.h in ${TCL_SRC_DIR}]) - fi - result="Using srcdir found in tclConfig.sh: ${TCL_SRC_DIR}" - fi - fi - - AC_SUBST(TCL_TOP_DIR_NATIVE) - - AC_SUBST(TCL_INCLUDES) - AC_MSG_RESULT([${result}]) -]) - -#------------------------------------------------------------------------ -# TEA_PUBLIC_TCL_HEADERS -- -# -# Locate the installed public Tcl header files -# -# Arguments: -# None. -# -# Requires: -# CYGPATH must be set -# -# Results: -# -# Adds a --with-tclinclude switch to configure. -# Result is cached. -# -# Substs the following vars: -# TCL_INCLUDES -#------------------------------------------------------------------------ - -AC_DEFUN([TEA_PUBLIC_TCL_HEADERS], [ - AC_MSG_CHECKING([for Tcl public headers]) - - AC_ARG_WITH(tclinclude, [ --with-tclinclude directory containing the public Tcl header files], with_tclinclude=${withval}) - - AC_CACHE_VAL(ac_cv_c_tclh, [ - # Use the value from --with-tclinclude, if it was given - - if test x"${with_tclinclude}" != x ; then - if test -f "${with_tclinclude}/tcl.h" ; then - ac_cv_c_tclh=${with_tclinclude} - else - AC_MSG_ERROR([${with_tclinclude} directory does not contain tcl.h]) - fi - else - list="" - if test "`uname -s`" = "Darwin"; then - # If Tcl was built as a framework, attempt to use - # the framework's Headers directory - case ${TCL_DEFS} in - *TCL_FRAMEWORK*) - list="`ls -d ${TCL_BIN_DIR}/Headers 2>/dev/null`" - ;; - esac - fi - - # Look in the source dir only if Tcl is not installed, - # and in that situation, look there before installed locations. - if test -f "${TCL_BIN_DIR}/Makefile" ; then - list="$list `ls -d ${TCL_SRC_DIR}/generic 2>/dev/null`" - fi - - # Check order: pkg --prefix location, Tcl's --prefix location, - # relative to directory of tclConfig.sh. - - eval "temp_includedir=${includedir}" - list="$list \ - `ls -d ${temp_includedir} 2>/dev/null` \ - `ls -d ${TCL_PREFIX}/include 2>/dev/null` \ - `ls -d ${TCL_BIN_DIR}/../include 2>/dev/null`" - if test "${TEA_PLATFORM}" != "windows" -o "$GCC" = "yes"; then - list="$list /usr/local/include /usr/include" - if test x"${TCL_INCLUDE_SPEC}" != x ; then - d=`echo "${TCL_INCLUDE_SPEC}" | sed -e 's/^-I//'` - list="$list `ls -d ${d} 2>/dev/null`" - fi - fi - for i in $list ; do - if test -f "$i/tcl.h" ; then - ac_cv_c_tclh=$i - break - fi - done - fi - ]) - - # Print a message based on how we determined the include path - - if test x"${ac_cv_c_tclh}" = x ; then - AC_MSG_ERROR([tcl.h not found. Please specify its location with --with-tclinclude]) - else - AC_MSG_RESULT([${ac_cv_c_tclh}]) - fi - - # Convert to a native path and substitute into the output files. - - INCLUDE_DIR_NATIVE=`${CYGPATH} ${ac_cv_c_tclh}` - - TCL_INCLUDES=-I\"${INCLUDE_DIR_NATIVE}\" - - AC_SUBST(TCL_INCLUDES) -]) - -#------------------------------------------------------------------------ -# TEA_PRIVATE_TK_HEADERS -- -# -# Locate the private Tk include files -# -# Arguments: -# -# Requires: -# TK_SRC_DIR Assumes that TEA_LOAD_TKCONFIG has -# already been called. -# -# Results: -# -# Substs the following vars: -# TK_INCLUDES -#------------------------------------------------------------------------ - -AC_DEFUN([TEA_PRIVATE_TK_HEADERS], [ - # Allow for --with-tkinclude to take effect and define ${ac_cv_c_tkh} - AC_REQUIRE([TEA_PUBLIC_TK_HEADERS]) - AC_MSG_CHECKING([for Tk private include files]) - - TK_SRC_DIR_NATIVE=`${CYGPATH} ${TK_SRC_DIR}` - TK_TOP_DIR_NATIVE=\"${TK_SRC_DIR_NATIVE}\" - - # Check to see if tkPort.h isn't already with the public headers - # Don't look for tkInt.h because that resides with tk.h in the core - # sources, but the Port headers are in a different directory - if test "${TEA_PLATFORM}" = "windows" -a \ - -f "${ac_cv_c_tkh}/tkWinPort.h"; then - result="private headers found with public headers" - elif test "${TEA_PLATFORM}" = "unix" -a \ - -f "${ac_cv_c_tkh}/tkUnixPort.h"; then - result="private headers found with public headers" - else - TK_GENERIC_DIR_NATIVE=\"${TK_SRC_DIR_NATIVE}/generic\" - TK_XLIB_DIR_NATIVE=\"${TK_SRC_DIR_NATIVE}/xlib\" - if test "${TEA_PLATFORM}" = "windows"; then - TK_PLATFORM_DIR_NATIVE=\"${TK_SRC_DIR_NATIVE}/win\" - else - TK_PLATFORM_DIR_NATIVE=\"${TK_SRC_DIR_NATIVE}/unix\" - fi - # Overwrite the previous TK_INCLUDES as this should capture both - # public and private headers in the same set. - # We want to ensure these are substituted so as not to require - # any *_NATIVE vars be defined in the Makefile - TK_INCLUDES="-I${TK_GENERIC_DIR_NATIVE} -I${TK_PLATFORM_DIR_NATIVE}" - # Detect and add ttk subdir - if test -d "${TK_SRC_DIR}/generic/ttk"; then - TK_INCLUDES="${TK_INCLUDES} -I\"${TK_SRC_DIR_NATIVE}/generic/ttk\"" - fi - if test "${TEA_WINDOWINGSYSTEM}" != "x11"; then - TK_INCLUDES="${TK_INCLUDES} -I\"${TK_XLIB_DIR_NATIVE}\"" - fi - if test "${TEA_WINDOWINGSYSTEM}" = "aqua"; then - TK_INCLUDES="${TK_INCLUDES} -I\"${TK_SRC_DIR_NATIVE}/macosx\"" - fi - if test "`uname -s`" = "Darwin"; then - # If Tk was built as a framework, attempt to use - # the framework's Headers and PrivateHeaders directories - case ${TK_DEFS} in - *TK_FRAMEWORK*) - if test -d "${TK_BIN_DIR}/Headers" -a \ - -d "${TK_BIN_DIR}/PrivateHeaders"; then - TK_INCLUDES="-I\"${TK_BIN_DIR}/Headers\" -I\"${TK_BIN_DIR}/PrivateHeaders\" ${TK_INCLUDES}" - else - TK_INCLUDES="${TK_INCLUDES} ${TK_INCLUDE_SPEC} `echo "${TK_INCLUDE_SPEC}" | sed -e 's/Headers/PrivateHeaders/'`" - fi - ;; - esac - result="Using ${TK_INCLUDES}" - else - if test ! -f "${TK_SRC_DIR}/generic/tkInt.h" ; then - AC_MSG_ERROR([Cannot find private header tkInt.h in ${TK_SRC_DIR}]) - fi - result="Using srcdir found in tkConfig.sh: ${TK_SRC_DIR}" - fi - fi - - AC_SUBST(TK_TOP_DIR_NATIVE) - AC_SUBST(TK_XLIB_DIR_NATIVE) - - AC_SUBST(TK_INCLUDES) - AC_MSG_RESULT([${result}]) -]) - -#------------------------------------------------------------------------ -# TEA_PUBLIC_TK_HEADERS -- -# -# Locate the installed public Tk header files -# -# Arguments: -# None. -# -# Requires: -# CYGPATH must be set -# -# Results: -# -# Adds a --with-tkinclude switch to configure. -# Result is cached. -# -# Substs the following vars: -# TK_INCLUDES -#------------------------------------------------------------------------ - -AC_DEFUN([TEA_PUBLIC_TK_HEADERS], [ - AC_MSG_CHECKING([for Tk public headers]) - - AC_ARG_WITH(tkinclude, [ --with-tkinclude directory containing the public Tk header files], with_tkinclude=${withval}) - - AC_CACHE_VAL(ac_cv_c_tkh, [ - # Use the value from --with-tkinclude, if it was given - - if test x"${with_tkinclude}" != x ; then - if test -f "${with_tkinclude}/tk.h" ; then - ac_cv_c_tkh=${with_tkinclude} - else - AC_MSG_ERROR([${with_tkinclude} directory does not contain tk.h]) - fi - else - list="" - if test "`uname -s`" = "Darwin"; then - # If Tk was built as a framework, attempt to use - # the framework's Headers directory. - case ${TK_DEFS} in - *TK_FRAMEWORK*) - list="`ls -d ${TK_BIN_DIR}/Headers 2>/dev/null`" - ;; - esac - fi - - # Look in the source dir only if Tk is not installed, - # and in that situation, look there before installed locations. - if test -f "${TK_BIN_DIR}/Makefile" ; then - list="$list `ls -d ${TK_SRC_DIR}/generic 2>/dev/null`" - fi - - # Check order: pkg --prefix location, Tk's --prefix location, - # relative to directory of tkConfig.sh, Tcl's --prefix location, - # relative to directory of tclConfig.sh. - - eval "temp_includedir=${includedir}" - list="$list \ - `ls -d ${temp_includedir} 2>/dev/null` \ - `ls -d ${TK_PREFIX}/include 2>/dev/null` \ - `ls -d ${TK_BIN_DIR}/../include 2>/dev/null` \ - `ls -d ${TCL_PREFIX}/include 2>/dev/null` \ - `ls -d ${TCL_BIN_DIR}/../include 2>/dev/null`" - if test "${TEA_PLATFORM}" != "windows" -o "$GCC" = "yes"; then - list="$list /usr/local/include /usr/include" - if test x"${TK_INCLUDE_SPEC}" != x ; then - d=`echo "${TK_INCLUDE_SPEC}" | sed -e 's/^-I//'` - list="$list `ls -d ${d} 2>/dev/null`" - fi - fi - for i in $list ; do - if test -f "$i/tk.h" ; then - ac_cv_c_tkh=$i - break - fi - done - fi - ]) - - # Print a message based on how we determined the include path - - if test x"${ac_cv_c_tkh}" = x ; then - AC_MSG_ERROR([tk.h not found. Please specify its location with --with-tkinclude]) - else - AC_MSG_RESULT([${ac_cv_c_tkh}]) - fi - - # Convert to a native path and substitute into the output files. - - INCLUDE_DIR_NATIVE=`${CYGPATH} ${ac_cv_c_tkh}` - - TK_INCLUDES=-I\"${INCLUDE_DIR_NATIVE}\" - - AC_SUBST(TK_INCLUDES) - - if test "${TEA_WINDOWINGSYSTEM}" != "x11"; then - # On Windows and Aqua, we need the X compat headers - AC_MSG_CHECKING([for X11 header files]) - if test ! -r "${INCLUDE_DIR_NATIVE}/X11/Xlib.h"; then - INCLUDE_DIR_NATIVE="`${CYGPATH} ${TK_SRC_DIR}/xlib`" - TK_XINCLUDES=-I\"${INCLUDE_DIR_NATIVE}\" - AC_SUBST(TK_XINCLUDES) - fi - AC_MSG_RESULT([${INCLUDE_DIR_NATIVE}]) - fi -]) - -#------------------------------------------------------------------------ -# TEA_PATH_CONFIG -- -# -# Locate the ${1}Config.sh file and perform a sanity check on -# the ${1} compile flags. These are used by packages like -# [incr Tk] that load *Config.sh files from more than Tcl and Tk. -# -# Arguments: -# none -# -# Results: -# -# Adds the following arguments to configure: -# --with-$1=... -# -# Defines the following vars: -# $1_BIN_DIR Full path to the directory containing -# the $1Config.sh file -#------------------------------------------------------------------------ - -AC_DEFUN([TEA_PATH_CONFIG], [ - # - # Ok, lets find the $1 configuration - # First, look for one uninstalled. - # the alternative search directory is invoked by --with-$1 - # - - if test x"${no_$1}" = x ; then - # we reset no_$1 in case something fails here - no_$1=true - AC_ARG_WITH($1, [ --with-$1 directory containing $1 configuration ($1Config.sh)], with_$1config=${withval}) - AC_MSG_CHECKING([for $1 configuration]) - AC_CACHE_VAL(ac_cv_c_$1config,[ - - # First check to see if --with-$1 was specified. - if test x"${with_$1config}" != x ; then - case ${with_$1config} in - */$1Config.sh ) - if test -f ${with_$1config}; then - AC_MSG_WARN([--with-$1 argument should refer to directory containing $1Config.sh, not to $1Config.sh itself]) - with_$1config=`echo ${with_$1config} | sed 's!/$1Config\.sh$!!'` - fi;; - esac - if test -f "${with_$1config}/$1Config.sh" ; then - ac_cv_c_$1config=`(cd ${with_$1config}; pwd)` - else - AC_MSG_ERROR([${with_$1config} directory doesn't contain $1Config.sh]) - fi - fi - - # then check for a private $1 installation - if test x"${ac_cv_c_$1config}" = x ; then - for i in \ - ../$1 \ - `ls -dr ../$1*[[0-9]].[[0-9]]*.[[0-9]]* 2>/dev/null` \ - `ls -dr ../$1*[[0-9]].[[0-9]][[0-9]] 2>/dev/null` \ - `ls -dr ../$1*[[0-9]].[[0-9]] 2>/dev/null` \ - `ls -dr ../$1*[[0-9]].[[0-9]]* 2>/dev/null` \ - ../../$1 \ - `ls -dr ../../$1*[[0-9]].[[0-9]]*.[[0-9]]* 2>/dev/null` \ - `ls -dr ../../$1*[[0-9]].[[0-9]][[0-9]] 2>/dev/null` \ - `ls -dr ../../$1*[[0-9]].[[0-9]] 2>/dev/null` \ - `ls -dr ../../$1*[[0-9]].[[0-9]]* 2>/dev/null` \ - ../../../$1 \ - `ls -dr ../../../$1*[[0-9]].[[0-9]]*.[[0-9]]* 2>/dev/null` \ - `ls -dr ../../../$1*[[0-9]].[[0-9]][[0-9]] 2>/dev/null` \ - `ls -dr ../../../$1*[[0-9]].[[0-9]] 2>/dev/null` \ - `ls -dr ../../../$1*[[0-9]].[[0-9]]* 2>/dev/null` \ - ${srcdir}/../$1 \ - `ls -dr ${srcdir}/../$1*[[0-9]].[[0-9]]*.[[0-9]]* 2>/dev/null` \ - `ls -dr ${srcdir}/../$1*[[0-9]].[[0-9]][[0-9]] 2>/dev/null` \ - `ls -dr ${srcdir}/../$1*[[0-9]].[[0-9]] 2>/dev/null` \ - `ls -dr ${srcdir}/../$1*[[0-9]].[[0-9]]* 2>/dev/null` \ - ; do - if test -f "$i/$1Config.sh" ; then - ac_cv_c_$1config=`(cd $i; pwd)` - break - fi - if test -f "$i/unix/$1Config.sh" ; then - ac_cv_c_$1config=`(cd $i/unix; pwd)` - break - fi - done - fi - - # check in a few common install locations - if test x"${ac_cv_c_$1config}" = x ; then - for i in `ls -d ${libdir} 2>/dev/null` \ - `ls -d ${exec_prefix}/lib 2>/dev/null` \ - `ls -d ${prefix}/lib 2>/dev/null` \ - `ls -d /usr/local/lib 2>/dev/null` \ - `ls -d /usr/contrib/lib 2>/dev/null` \ - `ls -d /usr/lib 2>/dev/null` \ - ; do - if test -f "$i/$1Config.sh" ; then - ac_cv_c_$1config=`(cd $i; pwd)` - break - fi - done - fi - ]) - - if test x"${ac_cv_c_$1config}" = x ; then - $1_BIN_DIR="# no $1 configs found" - AC_MSG_WARN([Cannot find $1 configuration definitions]) - exit 0 - else - no_$1= - $1_BIN_DIR=${ac_cv_c_$1config} - AC_MSG_RESULT([found $$1_BIN_DIR/$1Config.sh]) - fi - fi -]) - -#------------------------------------------------------------------------ -# TEA_LOAD_CONFIG -- -# -# Load the $1Config.sh file -# -# Arguments: -# -# Requires the following vars to be set: -# $1_BIN_DIR -# -# Results: -# -# Subst the following vars: -# $1_SRC_DIR -# $1_LIB_FILE -# $1_LIB_SPEC -# -#------------------------------------------------------------------------ - -AC_DEFUN([TEA_LOAD_CONFIG], [ - AC_MSG_CHECKING([for existence of ${$1_BIN_DIR}/$1Config.sh]) - - if test -f "${$1_BIN_DIR}/$1Config.sh" ; then - AC_MSG_RESULT([loading]) - . "${$1_BIN_DIR}/$1Config.sh" - else - AC_MSG_RESULT([file not found]) - fi - - # - # If the $1_BIN_DIR is the build directory (not the install directory), - # then set the common variable name to the value of the build variables. - # For example, the variable $1_LIB_SPEC will be set to the value - # of $1_BUILD_LIB_SPEC. An extension should make use of $1_LIB_SPEC - # instead of $1_BUILD_LIB_SPEC since it will work with both an - # installed and uninstalled version of Tcl. - # - - if test -f "${$1_BIN_DIR}/Makefile" ; then - AC_MSG_WARN([Found Makefile - using build library specs for $1]) - $1_LIB_SPEC=${$1_BUILD_LIB_SPEC} - $1_STUB_LIB_SPEC=${$1_BUILD_STUB_LIB_SPEC} - $1_STUB_LIB_PATH=${$1_BUILD_STUB_LIB_PATH} - fi - - AC_SUBST($1_VERSION) - AC_SUBST($1_BIN_DIR) - AC_SUBST($1_SRC_DIR) - - AC_SUBST($1_LIB_FILE) - AC_SUBST($1_LIB_SPEC) - - AC_SUBST($1_STUB_LIB_FILE) - AC_SUBST($1_STUB_LIB_SPEC) - AC_SUBST($1_STUB_LIB_PATH) -]) - -#------------------------------------------------------------------------ -# TEA_PATH_CELIB -- -# -# Locate Keuchel's celib emulation layer for targeting Win/CE -# -# Arguments: -# none -# -# Results: -# -# Adds the following arguments to configure: -# --with-celib=... -# -# Defines the following vars: -# CELIB_DIR Full path to the directory containing -# the include and platform lib files -#------------------------------------------------------------------------ - -AC_DEFUN([TEA_PATH_CELIB], [ - # First, look for one uninstalled. - # the alternative search directory is invoked by --with-celib - - if test x"${no_celib}" = x ; then - # we reset no_celib in case something fails here - no_celib=true - AC_ARG_WITH(celib,[ --with-celib=DIR use Windows/CE support library from DIR], with_celibconfig=${withval}) - AC_MSG_CHECKING([for Windows/CE celib directory]) - AC_CACHE_VAL(ac_cv_c_celibconfig,[ - # First check to see if --with-celibconfig was specified. - if test x"${with_celibconfig}" != x ; then - if test -d "${with_celibconfig}/inc" ; then - ac_cv_c_celibconfig=`(cd ${with_celibconfig}; pwd)` - else - AC_MSG_ERROR([${with_celibconfig} directory doesn't contain inc directory]) - fi - fi - - # then check for a celib library - if test x"${ac_cv_c_celibconfig}" = x ; then - for i in \ - ../celib-palm-3.0 \ - ../celib \ - ../../celib-palm-3.0 \ - ../../celib \ - `ls -dr ../celib-*3.[[0-9]]* 2>/dev/null` \ - ${srcdir}/../celib-palm-3.0 \ - ${srcdir}/../celib \ - `ls -dr ${srcdir}/../celib-*3.[[0-9]]* 2>/dev/null` \ - ; do - if test -d "$i/inc" ; then - ac_cv_c_celibconfig=`(cd $i; pwd)` - break - fi - done - fi - ]) - if test x"${ac_cv_c_celibconfig}" = x ; then - AC_MSG_ERROR([Cannot find celib support library directory]) - else - no_celib= - CELIB_DIR=${ac_cv_c_celibconfig} - CELIB_DIR=`echo "$CELIB_DIR" | sed -e 's!\\\!/!g'` - AC_MSG_RESULT([found $CELIB_DIR]) - fi - fi -]) - - -# Local Variables: -# mode: autoconf -# End: