DELETED config/install-sh Index: config/install-sh ================================================================== --- config/install-sh +++ /dev/null @@ -1,119 +0,0 @@ -#!/bin/sh - -# -# install - install a program, script, or datafile -# This comes from X11R5; it is not part of GNU. -# -# $XConsortium: install.sh,v 1.2 89/12/18 14:47:22 jim Exp $ -# -# This script is compatible with the BSD install script, but was written -# from scratch. -# - - -# set DOITPROG to echo to test this script - -# Don't use :- since 4.3BSD and earlier shells don't like it. -doit="${DOITPROG-}" - - -# put in absolute paths if you don't have them in your path; or use env. vars. - -mvprog="${MVPROG-mv}" -cpprog="${CPPROG-cp}" -chmodprog="${CHMODPROG-chmod}" -chownprog="${CHOWNPROG-chown}" -chgrpprog="${CHGRPPROG-chgrp}" -stripprog="${STRIPPROG-strip}" -rmprog="${RMPROG-rm}" - -instcmd="$mvprog" -chmodcmd="" -chowncmd="" -chgrpcmd="" -stripcmd="" -rmcmd="$rmprog -f" -mvcmd="$mvprog" -src="" -dst="" - -while [ x"$1" != x ]; do - case $1 in - -c) instcmd="$cpprog" - shift - continue;; - - -m) chmodcmd="$chmodprog $2" - shift - shift - continue;; - - -o) chowncmd="$chownprog $2" - shift - shift - continue;; - - -g) chgrpcmd="$chgrpprog $2" - shift - shift - continue;; - - -s) stripcmd="$stripprog" - shift - continue;; - - *) if [ x"$src" = x ] - then - src=$1 - else - dst=$1 - fi - shift - continue;; - esac -done - -if [ x"$src" = x ] -then - echo "install: no input file specified" - exit 1 -fi - -if [ x"$dst" = x ] -then - echo "install: no destination specified" - exit 1 -fi - - -# If destination is a directory, append the input filename; if your system -# does not like double slashes in filenames, you may need to add some logic - -if [ -d $dst ] -then - dst="$dst"/`basename $src` -fi - -# Make a temp file name in the proper directory. - -dstdir=`dirname $dst` -dsttmp=$dstdir/#inst.$$# - -# Move or copy the file name to the temp name - -$doit $instcmd $src $dsttmp - -# and set any options; do chmod last to preserve setuid bits - -if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; fi -if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; fi -if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; fi -if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; fi - -# Now rename the file to the real destination. - -$doit $rmcmd $dst -$doit $mvcmd $dsttmp $dst - - -exit 0 DELETED config/mkinstalldirs Index: config/mkinstalldirs ================================================================== --- config/mkinstalldirs +++ /dev/null @@ -1,40 +0,0 @@ -#! /bin/sh -# mkinstalldirs --- make directory hierarchy -# Author: Noah Friedman -# Created: 1993-05-16 -# Public domain - -# $Id: mkinstalldirs,v 1.1 2003/05/16 17:33:19 razzell Exp $ - -errstatus=0 - -for file -do - set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'` - shift - - pathcomp= - for d - do - pathcomp="$pathcomp$d" - case "$pathcomp" in - -* ) pathcomp=./$pathcomp ;; - esac - - if test ! -d "$pathcomp"; then - echo "mkdir $pathcomp" - - mkdir "$pathcomp" || lasterr=$? - - if test ! -d "$pathcomp"; then - errstatus=$lasterr - fi - fi - - pathcomp="$pathcomp/" - done -done - -exit $errstatus - -# mkinstalldirs ends here DELETED config/tcl.m4 Index: config/tcl.m4 ================================================================== --- config/tcl.m4 +++ /dev/null @@ -1,2709 +0,0 @@ -# tcl.m4 -- -# -# This file provides a set of autoconf macros to help TEA-enable -# a Tcl extension. -# -# Copyright (c) 1999-2000 Ajuba Solutions. -# -# See the file "license.terms" for information on usage and redistribution -# of this file, and for a DISCLAIMER OF ALL WARRANTIES. - -#------------------------------------------------------------------------ -# SC_PATH_TCLCONFIG -- -# -# Locate the tclConfig.sh file and perform a sanity check on -# the Tcl compile flags -# -# Arguments: -# none -# -# Results: -# -# Adds the following arguments to configure: -# --with-tcl=... -# -# Defines the following vars: -# TCL_BIN_DIR Full path to the directory containing -# the tclConfig.sh file -#------------------------------------------------------------------------ - -AC_DEFUN(SC_PATH_TCLCONFIG, [ - # - # Ok, lets find the tcl configuration - # First, look for one uninstalled. - # the alternative search directory is invoked by --with-tcl - # - - if test x"${no_tcl}" = x ; then - # we reset no_tcl in case something fails here - no_tcl=true - AC_ARG_WITH(tcl, [ --with-tcl directory containing tcl configuration (tclConfig.sh)], with_tclconfig=${withval}) - AC_MSG_CHECKING([for Tcl configuration]) - AC_CACHE_VAL(ac_cv_c_tclconfig,[ - - # First check to see if --with-tcl was specified. - if test x"${with_tclconfig}" != x ; then - if test -f "${with_tclconfig}/tclConfig.sh" ; then - ac_cv_c_tclconfig=`(cd ${with_tclconfig}; pwd)` - else - AC_MSG_ERROR([${with_tclconfig} directory doesn't contain tclConfig.sh]) - fi - fi - - # then check for a private Tcl installation - if test x"${ac_cv_c_tclconfig}" = x ; then - for i in \ - ../tcl \ - `ls -dr ../tcl[[8-9]].[[0-9]]* 2>/dev/null` \ - ../../tcl \ - `ls -dr ../../tcl[[8-9]].[[0-9]]* 2>/dev/null` \ - ../../../tcl \ - `ls -dr ../../../tcl[[8-9]].[[0-9]]* 2>/dev/null` ; do - if test -f "$i/unix/tclConfig.sh" ; then - ac_cv_c_tclconfig=`(cd $i/unix; pwd)` - break - fi - done - fi - - # check in a few common install locations - if test x"${ac_cv_c_tclconfig}" = x ; then - for i in `ls -d ${prefix}/lib 2>/dev/null` \ - `ls -d /usr/lib 2>/dev/null` \ - `ls -d /usr/local/lib 2>/dev/null` ; do - if test -f "$i/tclConfig.sh" ; then - ac_cv_c_tclconfig=`(cd $i; pwd)` - break - fi - done - fi - - # check in a few other private locations - if test x"${ac_cv_c_tclconfig}" = x ; then - for i in \ - ${srcdir}/../tcl \ - `ls -dr ${srcdir}/../tcl[[8-9]].[[0-9]]* 2>/dev/null` ; do - if test -f "$i/unix/tclConfig.sh" ; then - ac_cv_c_tclconfig=`(cd $i/unix; pwd)` - break - fi - done - fi - ]) - - if test x"${ac_cv_c_tclconfig}" = x ; then - TCL_BIN_DIR="# no Tcl configs found" - AC_MSG_WARN(Can't find Tcl configuration definitions) - exit 0 - else - no_tcl= - TCL_BIN_DIR=${ac_cv_c_tclconfig} - AC_MSG_RESULT(found $TCL_BIN_DIR/tclConfig.sh) - fi - fi -]) - -#------------------------------------------------------------------------ -# SC_PATH_TKCONFIG -- -# -# Locate the tkConfig.sh file -# -# Arguments: -# none -# -# Results: -# -# Adds the following arguments to configure: -# --with-tk=... -# -# Defines the following vars: -# TK_BIN_DIR Full path to the directory containing -# the tkConfig.sh file -#------------------------------------------------------------------------ - -AC_DEFUN(SC_PATH_TKCONFIG, [ - # - # Ok, lets find the tk configuration - # First, look for one uninstalled. - # the alternative search directory is invoked by --with-tk - # - - if test x"${no_tk}" = x ; then - # we reset no_tk in case something fails here - no_tk=true - AC_ARG_WITH(tk, [ --with-tk directory containing tk configuration (tkConfig.sh)], with_tkconfig=${withval}) - AC_MSG_CHECKING([for Tk configuration]) - AC_CACHE_VAL(ac_cv_c_tkconfig,[ - - # First check to see if --with-tkconfig was specified. - if test x"${with_tkconfig}" != x ; then - if test -f "${with_tkconfig}/tkConfig.sh" ; then - ac_cv_c_tkconfig=`(cd ${with_tkconfig}; pwd)` - else - AC_MSG_ERROR([${with_tkconfig} directory doesn't contain tkConfig.sh]) - fi - fi - - # then check for a private Tk library - if test x"${ac_cv_c_tkconfig}" = x ; then - for i in \ - ../tk \ - `ls -dr ../tk[[8-9]].[[0-9]]* 2>/dev/null` \ - ../../tk \ - `ls -dr ../../tk[[8-9]].[[0-9]]* 2>/dev/null` \ - ../../../tk \ - `ls -dr ../../../tk[[8-9]].[[0-9]]* 2>/dev/null` ; do - if test -f "$i/unix/tkConfig.sh" ; then - ac_cv_c_tkconfig=`(cd $i/unix; pwd)` - break - fi - done - fi - # check in a few common install locations - if test x"${ac_cv_c_tkconfig}" = x ; then - for i in `ls -d ${prefix}/lib 2>/dev/null` \ - `ls -d /usr/lib 2>/dev/null` \ - `ls -d /usr/local/lib 2>/dev/null` ; do - if test -f "$i/tkConfig.sh" ; then - ac_cv_c_tkconfig=`(cd $i; pwd)` - break - fi - done - fi - # check in a few other private locations - if test x"${ac_cv_c_tkconfig}" = x ; then - for i in \ - ${srcdir}/../tk \ - `ls -dr ${srcdir}/../tk[[8-9]].[[0-9]]* 2>/dev/null` ; do - if test -f "$i/unix/tkConfig.sh" ; then - ac_cv_c_tkconfig=`(cd $i/unix; pwd)` - break - fi - done - fi - ]) - if test x"${ac_cv_c_tkconfig}" = x ; then - TK_BIN_DIR="# no Tk configs found" - AC_MSG_WARN(Can't find Tk configuration definitions) - exit 0 - else - no_tk= - TK_BIN_DIR=${ac_cv_c_tkconfig} - AC_MSG_RESULT(found $TK_BIN_DIR/tkConfig.sh) - fi - fi - -]) - -#------------------------------------------------------------------------ -# SC_LOAD_TCLCONFIG -- -# -# Load the tclConfig.sh file -# -# Arguments: -# -# Requires the following vars to be set: -# TCL_BIN_DIR -# -# Results: -# -# Subst the following vars: -# TCL_BIN_DIR -# TCL_SRC_DIR -# TCL_LIB_FILE -# -#------------------------------------------------------------------------ - -AC_DEFUN(SC_LOAD_TCLCONFIG, [ - AC_MSG_CHECKING([for existence of $TCL_BIN_DIR/tclConfig.sh]) - - if test -f "$TCL_BIN_DIR/tclConfig.sh" ; then - AC_MSG_RESULT([loading]) - . $TCL_BIN_DIR/tclConfig.sh - else - AC_MSG_RESULT([file not found]) - fi - - # - # The eval is required to do the TCL_DBGX substitution in the - # TCL_LIB_FILE variable - # - - eval TCL_LIB_FILE=${TCL_LIB_FILE} - eval TCL_LIB_FLAG=${TCL_LIB_FLAG} - - AC_SUBST(TCL_DBGX) - AC_SUBST(TCL_BIN_DIR) - AC_SUBST(TCL_SRC_DIR) - AC_SUBST(TCL_LIB_FILE) - AC_SUBST(TCL_LIBS) - AC_SUBST(TCL_DEFS) - AC_SUBST(TCL_SHLIB_LD_LIBS) - AC_SUBST(TCL_EXTRA_CFLAGS) - AC_SUBST(TCL_LD_FLAGS) - AC_SUBST(TCL_LIB_FILE) - AC_SUBST(TCL_STUB_LIB_FILE) - AC_SUBST(TCL_LIB_SPEC) - AC_SUBST(TCL_BUILD_LIB_SPEC) - AC_SUBST(TCL_STUB_LIB_SPEC) - AC_SUBST(TCL_BUILD_STUB_LIB_SPEC) -]) - -#------------------------------------------------------------------------ -# SC_LOAD_TKCONFIG -- -# -# Load the tkConfig.sh file -# -# Arguments: -# -# Requires the following vars to be set: -# TK_BIN_DIR -# -# Results: -# -# Sets the following vars that should be in tkConfig.sh: -# TK_BIN_DIR -#------------------------------------------------------------------------ - -AC_DEFUN(SC_LOAD_TKCONFIG, [ - AC_MSG_CHECKING([for existence of $TK_BIN_DIR/tkConfig.sh]) - - if test -f "$TK_BIN_DIR/tkConfig.sh" ; then - AC_MSG_RESULT([loading]) - . $TK_BIN_DIR/tkConfig.sh - else - AC_MSG_RESULT([could not find $TK_BIN_DIR/tkConfig.sh]) - fi - - AC_SUBST(TK_BIN_DIR) - AC_SUBST(TK_SRC_DIR) - AC_SUBST(TK_LIB_FILE) - AC_SUBST(TK_XINCLUDES) -]) - -#------------------------------------------------------------------------ -# SC_ENABLE_GCC -- -# -# Allows the use of GCC if available -# -# Arguments: -# none -# -# Results: -# -# Adds the following arguments to configure: -# --enable-gcc -# -# Sets the following vars: -# CC Command to use for the compiler -#------------------------------------------------------------------------ - -AC_DEFUN(SC_ENABLE_GCC, [ - AC_ARG_ENABLE(gcc, [ --enable-gcc allow use of gcc if available [--disable-gcc]], - [ok=$enableval], [ok=no]) - if test "$ok" = "yes"; then - CC=gcc - else - case "`uname -s`" in - *win32* | *WIN32* | *CYGWIN_NT* | *CYGWIN_98* | *CYGWIN_95*) - CC=cl - ;; - *) - CC=${CC-cc} - ;; - esac - fi - AC_PROG_CC -]) - -#------------------------------------------------------------------------ -# SC_ENABLE_SHARED -- -# -# Allows the building of shared libraries -# -# Arguments: -# none -# -# Results: -# -# Adds the following arguments to configure: -# --enable-shared=yes|no -# -# Defines the following vars: -# STATIC_BUILD Used for building import/export libraries -# on Windows. -# -# Sets the following vars: -# SHARED_BUILD Value of 1 or 0 -#------------------------------------------------------------------------ - -AC_DEFUN(SC_ENABLE_SHARED, [ - AC_MSG_CHECKING([how to build libraries]) - AC_ARG_ENABLE(shared, - [ --enable-shared build and link with shared libraries [--enable-shared]], - [tcl_ok=$enableval], [tcl_ok=yes]) - - if test "${enable_shared+set}" = set; then - enableval="$enable_shared" - tcl_ok=$enableval - else - tcl_ok=yes - fi - - if test "$tcl_ok" = "yes" ; then - AC_MSG_RESULT([shared]) - SHARED_BUILD=1 - else - AC_MSG_RESULT([static]) - SHARED_BUILD=0 - AC_DEFINE(STATIC_BUILD) - fi -]) - -#------------------------------------------------------------------------ -# SC_ENABLE_THREADS -- -# -# Specify if thread support should be enabled -# -# Arguments: -# none -# -# Results: -# -# Adds the following arguments to configure: -# --enable-threads -# -# Sets the following vars: -# THREADS_LIBS Thread library(s) -# -# Defines the following vars: -# TCL_THREADS -# _REENTRANT -# -#------------------------------------------------------------------------ - -AC_DEFUN(SC_ENABLE_THREADS, [ - AC_MSG_CHECKING(for building with threads) - AC_ARG_ENABLE(threads, [ --enable-threads build with threads], - [tcl_ok=$enableval], [tcl_ok=no]) - - if test "$tcl_ok" = "yes"; then - TCL_THREADS=1 - AC_DEFINE(TCL_THREADS) - AC_DEFINE(_REENTRANT) - - case "`uname -s`" in - *win32* | *WIN32* | *CYGWIN_NT* | *CYGWIN_98* | *CYGWIN_95*) - AC_MSG_RESULT(yes) - ;; - *) - AC_CHECK_LIB(pthread,pthread_mutex_init,tcl_ok=yes,tcl_ok=no) - if test "$tcl_ok" = "yes"; then - # The space is needed - THREADS_LIBS=" -lpthread" - AC_MSG_RESULT(yes) - else - TCL_THREADS=0 - AC_MSG_RESULT(no) - AC_MSG_WARN("Don t know how to find pthread lib on your system - you must disable thread support or edit the LIBS in the Makefile...") - fi - ;; - esac - else - TCL_THREADS=0 - AC_MSG_RESULT(no (default)) - fi - -]) - -#------------------------------------------------------------------------ -# SC_ENABLE_SYMBOLS -- -# -# Specify if debugging symbols should be used -# -# Arguments: -# none -# -# Requires the following vars to be set: -# CFLAGS_DEBUG -# CFLAGS_OPTIMIZE -# LDFLAGS_DEBUG -# LDFLAGS_OPTIMIZE -# -# Results: -# -# Adds the following arguments to configure: -# --enable-symbols -# -# Defines the following vars: -# CFLAGS_DEFAULT Sets to CFLAGS_DEBUG if true -# Sets to CFLAGS_OPTIMIZE if false -# LDFLAGS_DEFAULT Sets to LDFLAGS_DEBUG if true -# Sets to LDFLAGS_OPTIMIZE if false -# DBGX Debug library extension -# -#------------------------------------------------------------------------ - -AC_DEFUN(SC_ENABLE_SYMBOLS, [ - case "`uname -s`" in - *win32* | *WIN32* | *CYGWIN_NT* | *CYGWIN_98* | *CYGWIN_95*) - tcl_dbgx=d - ;; - *) - tcl_dbgx=g - ;; - esac - - AC_MSG_CHECKING([for build with symbols]) - AC_ARG_ENABLE(symbols, [ --enable-symbols build with debugging symbols [--disable-symbols]], [tcl_ok=$enableval], [tcl_ok=no]) - if test "$tcl_ok" = "yes"; then - CFLAGS_DEFAULT="${CFLAGS_DEBUG}" - LDFLAGS_DEFAULT="${LDFLAGS_DEBUG}" - DBGX=${tcl_dbgx} - TCL_DBGX=${tcl_dbgx} - AC_MSG_RESULT([yes]) - else - CFLAGS_DEFAULT="${CFLAGS_OPTIMIZE}" - LDFLAGS_DEFAULT="${LDFLAGS_OPTIMIZE}" - DBGX="" - TCL_DBGX="" - AC_MSG_RESULT([no]) - fi - - AC_SUBST(TCL_DBGX) - AC_SUBST(CFLAGS_DEFAULT) - AC_SUBST(LDFLAGS_DEFAULT) -]) - -#-------------------------------------------------------------------- -# SC_CONFIG_CFLAGS -# -# Try to determine the proper flags to pass to the compiler -# for building shared libraries and other such nonsense. -# -# Arguments: -# none -# -# Results: -# -# Defines the following vars: -# -# DL_OBJS - Name of the object file that implements dynamic -# loading for Tcl on this system. -# DL_LIBS - Library file(s) to include in tclsh and other base -# applications in order for the "load" command to work. -# LDFLAGS - Flags to pass to the compiler when linking object -# files into an executable application binary such -# as tclsh. -# LD_SEARCH_FLAGS-Flags to pass to ld, such as "-R /usr/local/tcl/lib", -# that tell the run-time dynamic linker where to look -# for shared libraries such as libtcl.so. Depends on -# the variable LIB_RUNTIME_DIR in the Makefile. -# MAKE_LIB - Command to execute to build the Tcl library; -# differs depending on whether or not Tcl is being -# compiled as a shared library. -# SHLIB_CFLAGS - Flags to pass to cc when compiling the components -# of a shared library (may request position-independent -# code, among other things). -# SHLIB_LD - Base command to use for combining object files -# into a shared library. -# SHLIB_LD_LIBS - Dependent libraries for the linker to scan when -# creating shared libraries. This symbol typically -# goes at the end of the "ld" commands that build -# shared libraries. The value of the symbol is -# "${LIBS}" if all of the dependent libraries should -# be specified when creating a shared library. If -# dependent libraries should not be specified (as on -# SunOS 4.x, where they cause the link to fail, or in -# general if Tcl and Tk aren't themselves shared -# libraries), then this symbol has an empty string -# as its value. -# SHLIB_SUFFIX - Suffix to use for the names of dynamically loadable -# extensions. An empty string means we don't know how -# to use shared libraries on this platform. -# TCL_LIB_FILE - Name of the file that contains the Tcl library, such -# as libtcl7.8.so or libtcl7.8.a. -# TCL_LIB_SUFFIX -Specifies everything that comes after the "libtcl" -# in the shared library name, using the $VERSION variable -# to put the version in the right place. This is used -# by platforms that need non-standard library names. -# Examples: ${VERSION}.so.1.1 on NetBSD, since it needs -# to have a version after the .so, and ${VERSION}.a -# on AIX, since the Tcl shared library needs to have -# a .a extension whereas shared objects for loadable -# extensions have a .so extension. Defaults to -# ${VERSION}${SHLIB_SUFFIX}. -# TCL_NEEDS_EXP_FILE - -# 1 means that an export file is needed to link to a -# shared library. -# TCL_EXP_FILE - The name of the installed export / import file which -# should be used to link to the Tcl shared library. -# Empty if Tcl is unshared. -# TCL_BUILD_EXP_FILE - -# The name of the built export / import file which -# should be used to link to the Tcl shared library. -# Empty if Tcl is unshared. -# CFLAGS_DEBUG - -# Flags used when running the compiler in debug mode -# CFLAGS_OPTIMIZE - -# Flags used when running the compiler in optimize mode -# -# EXTRA_CFLAGS -# -# Subst's the following vars: -# DL_LIBS -# CFLAGS_DEBUG -# CFLAGS_OPTIMIZE -#-------------------------------------------------------------------- - -AC_DEFUN(SC_CONFIG_CFLAGS, [ - - # Step 0: Enable 64 bit support? - - AC_MSG_CHECKING([if 64bit support is enabled]) - AC_ARG_ENABLE(64bit,[ --enable-64bit enable 64bit support],,enableval="no") - - if test "$enableval" = "yes"; then - AC_MSG_RESULT(Will compile with 64bit support) - do64bit=yes - else - do64bit=no - fi - AC_MSG_RESULT($do64bit) - - # Step 1: set the variable "system" to hold the name and version number - # for the system. This can usually be done via the "uname" command, but - # there are a few systems, like Next, where this doesn't work. - - AC_MSG_CHECKING([system version (for dynamic loading)]) - if test -f /usr/lib/NextStep/software_version; then - system=NEXTSTEP-`awk '/3/,/3/' /usr/lib/NextStep/software_version` - else - system=`uname -s`-`uname -r` - if test "$?" -ne 0 ; then - AC_MSG_RESULT([unknown (can't find uname command)]) - system=unknown - else - # Special check for weird MP-RAS system (uname returns weird - # results, and the version is kept in special file). - - if test -r /etc/.relid -a "X`uname -n`" = "X`uname -s`" ; then - system=MP-RAS-`awk '{print $3}' /etc/.relid'` - fi - if test "`uname -s`" = "AIX" ; then - system=AIX-`uname -v`.`uname -r` - fi - AC_MSG_RESULT($system) - fi - fi - - # Step 2: check for existence of -ldl library. This is needed because - # Linux can use either -ldl or -ldld for dynamic loading. - - AC_CHECK_LIB(dl, dlopen, have_dl=yes, have_dl=no) - - # Step 3: set configuration options based on system name and version. - - do64bit_ok=no - fullSrcDir=`cd $srcdir; pwd` - EXTRA_CFLAGS="" - TCL_EXPORT_FILE_SUFFIX="" - UNSHARED_LIB_SUFFIX="" - TCL_TRIM_DOTS='`echo ${VERSION} | tr -d .`' - ECHO_VERSION='`echo ${VERSION}`' - TCL_LIB_VERSIONS_OK=ok - CFLAGS_DEBUG=-g - CFLAGS_OPTIMIZE=-O - TCL_NEEDS_EXP_FILE=0 - TCL_BUILD_EXP_FILE="" - TCL_EXP_FILE="" - STLIB_LD="ar cr" - case $system in - AIX-5.*) - if test "${TCL_THREADS}" = "1" -a "$using_gcc" = "no" ; then - # AIX requires the _r compiler when gcc isn't being used - if test "${CC}" != "cc_r" ; then - CC=${CC}_r - fi - AC_MSG_RESULT(Using $CC for compiling with threads) - fi - # AIX-5 uses ELF style dynamic libraries - SHLIB_CFLAGS="" - SHLIB_LD="/usr/ccs/bin/ld -G -z text" - - # Note: need the LIBS below, otherwise Tk won't find Tcl's - # symbols when dynamically loaded into tclsh. - - SHLIB_LD_LIBS='${LIBS}' - SHLIB_SUFFIX=".so" - DL_OBJS="tclLoadDl.o" - # AIX-5 has dl* in libc.so - DL_LIBS="" - LDFLAGS="" - if test "$using_gcc" = "yes" ; then - LD_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}' - else - LD_SEARCH_FLAGS='-R${LIB_RUNTIME_DIR}' - fi - - if test "$do64bit" = "yes" ; then - if test "$using_gcc" = "no" ; then - do64bit_ok=yes - EXTRA_CFLAGS="-q64" - LDFLAGS="-q64" - else - AC_MSG_WARN("64bit mode not supported with GCC on $system") - fi - fi - ;; - AIX-*) - if test "${TCL_THREADS}" = "1" -a "$using_gcc" = "no" ; then - # AIX requires the _r compiler when gcc isn't being used - if test "${CC}" != "cc_r" ; then - CC=${CC}_r - fi - AC_MSG_RESULT(Using $CC for compiling with threads) - fi - SHLIB_CFLAGS="" - SHLIB_LD="$fullSrcDir/ldAix /bin/ld -bhalt:4 -bM:SRE -bE:lib.exp -H512 -T512 -bnoentry" - SHLIB_LD_LIBS='${LIBS}' - SHLIB_SUFFIX=".so" - DL_OBJS="tclLoadDl.o" - DL_LIBS="-ldl" - LDFLAGS="" - LD_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}' - TCL_NEEDS_EXP_FILE=1 - TCL_EXPORT_FILE_SUFFIX='${VERSION}\$\{DBGX\}.exp' - - # AIX v<=4.1 has some different flags than 4.2+ - if test "$system" = "AIX-4.1" -o "`uname -v`" -lt "4" ; then - LIBOBJS="$LIBOBJS tclLoadAix.o" - DL_LIBS="-lld" - fi - - # On AIX <=v4 systems, libbsd.a has to be linked in to support - # non-blocking file IO. This library has to be linked in after - # the MATH_LIBS or it breaks the pow() function. The way to - # insure proper sequencing, is to add it to the tail of MATH_LIBS. - # This library also supplies gettimeofday. - # - # AIX does not have a timezone field in struct tm. When the AIX - # bsd library is used, the timezone global and the gettimeofday - # methods are to be avoided for timezone deduction instead, we - # deduce the timezone by comparing the localtime result on a - # known GMT value. - - AC_CHECK_LIB(bsd, gettimeofday, libbsd=yes, libbsd=no) - if test $libbsd = yes; then - MATH_LIBS="$MATH_LIBS -lbsd" - AC_DEFINE(USE_DELTA_FOR_TZ) - fi - ;; - BSD/OS-2.1*|BSD/OS-3*) - SHLIB_CFLAGS="" - SHLIB_LD="shlicc -r" - SHLIB_LD_LIBS='${LIBS}' - SHLIB_SUFFIX=".so" - DL_OBJS="tclLoadDl.o" - DL_LIBS="-ldl" - LDFLAGS="" - LD_SEARCH_FLAGS="" - ;; - BSD/OS-4.*) - SHLIB_CFLAGS="-export-dynamic -fPIC" - SHLIB_LD="cc -shared" - SHLIB_LD_LIBS='${LIBS}' - SHLIB_SUFFIX=".so" - DL_OBJS="tclLoadDl.o" - DL_LIBS="-ldl" - LDFLAGS="-export-dynamic" - LD_SEARCH_FLAGS="" - ;; - *win32*|*WIN32*|CYGWIN_NT*|cygwin_nt*|*CYGWIN_98*|*CYGWIN_95*) - CFLAGS_DEBUG="-nologo -Z7 -Od -WX ${runtime}d" - CFLAGS_OPTIMIZE="-nologo -Oti -Gs -GD ${runtime}" - LDFLAGS_CONSOLE="-subsystem:console" - LDFLAGS_WINDOW="-subsystem:windows" - LDFLAGS_DEBUG="-debug:full -debugtype:cv" - LDFLAGS_OPTIMIZE="-release" - EXTRA_CFLAGS="-YX" - PATHTYPE=-w - STLIB_LD="lib -nologo" - SHLIB_LD="link -dll -nologo -incremental:no" - SHLIB_LD_LIBS="user32.lib advapi32.lib" - RC="rc" - ;; - dgux*) - SHLIB_CFLAGS="-K PIC" - SHLIB_LD="cc -G" - SHLIB_LD_LIBS="" - SHLIB_SUFFIX=".so" - DL_OBJS="tclLoadDl.o" - DL_LIBS="-ldl" - LDFLAGS="" - LD_SEARCH_FLAGS="" - ;; - HP-UX-*.08.*|HP-UX-*.09.*|HP-UX-*.10.*|HP-UX-*.11.*) - SHLIB_SUFFIX=".sl" - AC_CHECK_LIB(dld, shl_load, tcl_ok=yes, tcl_ok=no) - if test "$tcl_ok" = yes; then - SHLIB_CFLAGS="+z" - SHLIB_LD="ld -b" - SHLIB_LD_LIBS="" - DL_OBJS="tclLoadShl.o" - DL_LIBS="-ldld" - LDFLAGS="-Wl,-E" - LD_SEARCH_FLAGS='-Wl,+s,+b,${LIB_RUNTIME_DIR}:.' - fi - ;; - IRIX-4.*) - SHLIB_CFLAGS="-G 0" - SHLIB_SUFFIX=".a" - SHLIB_LD="echo tclLdAout $CC \{$SHLIB_CFLAGS\} | `pwd`/tclsh -r -G 0" - SHLIB_LD_LIBS='${LIBS}' - DL_OBJS="tclLoadAout.o" - DL_LIBS="" - LDFLAGS="-Wl,-D,08000000" - LD_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}' - SHARED_LIB_SUFFIX='${VERSION}\$\{DBGX\}.a' - ;; - IRIX-5.*) - SHLIB_CFLAGS="" - SHLIB_LD="ld -shared -rdata_shared" - SHLIB_LD_LIBS='${LIBS}' - SHLIB_SUFFIX=".so" - DL_OBJS="tclLoadDl.o" - DL_LIBS="" - LD_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' - EXTRA_CFLAGS="" - LDFLAGS="" - ;; - IRIX-6.*|IRIX64-6.5*) - SHLIB_CFLAGS="" - SHLIB_LD="ld -n32 -shared -rdata_shared" - SHLIB_LD_LIBS='${LIBS}' - SHLIB_SUFFIX=".so" - DL_OBJS="tclLoadDl.o" - DL_LIBS="" - LD_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' - if test "$using_gcc" = "yes" ; then - EXTRA_CFLAGS="-mabi=n32" - LDFLAGS="-mabi=n32" - else - case $system in - IRIX-6.3) - # Use to build 6.2 compatible binaries on 6.3. - EXTRA_CFLAGS="-n32 -D_OLD_TERMIOS" - ;; - *) - EXTRA_CFLAGS="-n32" - ;; - esac - LDFLAGS="-n32" - fi - ;; - IRIX64-6.*) - SHLIB_CFLAGS="" - SHLIB_LD="ld -32 -shared -rdata_shared" - SHLIB_LD_LIBS='${LIBS}' - SHLIB_SUFFIX=".so" - DL_OBJS="tclLoadDl.o" - DL_LIBS="" - LDFLAGS="" - LD_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' - ;; - Linux*) - SHLIB_CFLAGS="-fPIC" - SHLIB_LD_LIBS='${LIBS}' - SHLIB_SUFFIX=".so" - - # egcs-2.91.66 on Redhat Linux 6.0 generates lots of warnings - # when you inline the string and math operations. Turn this off to - # get rid of the warnings. - - CFLAGS_OPTIMIZE="${CFLAGS_OPTIMIZE} -D__NO_STRING_INLINES -D__NO_MATH_INLINES" - - if test "$have_dl" = yes; then - SHLIB_LD="${CC} -shared" - DL_OBJS="tclLoadDl.o" - DL_LIBS="-ldl" - LDFLAGS="-rdynamic" - LD_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' - else - AC_CHECK_HEADER(dld.h, [ - SHLIB_LD="ld -shared" - DL_OBJS="tclLoadDld.o" - DL_LIBS="-ldld" - LDFLAGS="" - LD_SEARCH_FLAGS=""]) - fi - if test "`uname -m`" = "alpha" ; then - EXTRA_CFLAGS="-mieee" - fi - ;; - MP-RAS-02*) - SHLIB_CFLAGS="-K PIC" - SHLIB_LD="cc -G" - SHLIB_LD_LIBS="" - SHLIB_SUFFIX=".so" - DL_OBJS="tclLoadDl.o" - DL_LIBS="-ldl" - LDFLAGS="" - LD_SEARCH_FLAGS="" - ;; - MP-RAS-*) - SHLIB_CFLAGS="-K PIC" - SHLIB_LD="cc -G" - SHLIB_LD_LIBS="" - SHLIB_SUFFIX=".so" - DL_OBJS="tclLoadDl.o" - DL_LIBS="-ldl" - LDFLAGS="-Wl,-Bexport" - LD_SEARCH_FLAGS="" - ;; - NetBSD-*|FreeBSD-[[12]].*|OpenBSD-*) - # Not available on all versions: check for include file. - AC_CHECK_HEADER(dlfcn.h, [ - SHLIB_CFLAGS="-fpic" - SHLIB_LD="ld -Bshareable -x" - SHLIB_LD_LIBS="" - SHLIB_SUFFIX=".so" - DL_OBJS="tclLoadDl.o" - DL_LIBS="" - LDFLAGS="" - LD_SEARCH_FLAGS="" - SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}\$\{DBGX\}.so.1.0' - ], [ - SHLIB_CFLAGS="" - SHLIB_LD="echo tclLdAout $CC \{$SHLIB_CFLAGS\} | `pwd`/tclsh -r" - SHLIB_LD_LIBS='${LIBS}' - SHLIB_SUFFIX=".a" - DL_OBJS="tclLoadAout.o" - DL_LIBS="" - LDFLAGS="" - LD_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}' - SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}\$\{DBGX\}.a' - ]) - - # FreeBSD doesn't handle version numbers with dots. - - UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}\$\{DBGX\}.a' - TCL_LIB_VERSIONS_OK=nodots - ;; - FreeBSD-*) - # FreeBSD 3.* and greater have ELF. - SHLIB_CFLAGS="-fpic" - SHLIB_LD="ld -Bshareable -x" - SHLIB_LD_LIBS="" - SHLIB_SUFFIX=".so" - DL_OBJS="tclLoadDl.o" - DL_LIBS="" - LDFLAGS="" - LD_SEARCH_FLAGS="" - ;; - NEXTSTEP-*) - SHLIB_CFLAGS="" - SHLIB_LD="cc -nostdlib -r" - SHLIB_LD_LIBS="" - SHLIB_SUFFIX=".so" - DL_OBJS="tclLoadNext.o" - DL_LIBS="" - LDFLAGS="" - LD_SEARCH_FLAGS="" - ;; - OS/390-*) - CFLAGS_OPTIMIZE="" # Optimizer is buggy - AC_DEFINE(_OE_SOCKETS) # needed in sys/socket.h - ;; - OSF1-1.0|OSF1-1.1|OSF1-1.2) - # OSF/1 1.[012] from OSF, and derivatives, including Paragon OSF/1 - SHLIB_CFLAGS="" - # Hack: make package name same as library name - SHLIB_LD='ld -R -export $@:' - SHLIB_LD_LIBS="" - SHLIB_SUFFIX=".so" - DL_OBJS="tclLoadOSF.o" - DL_LIBS="" - LDFLAGS="" - LD_SEARCH_FLAGS="" - ;; - OSF1-1.*) - # OSF/1 1.3 from OSF using ELF, and derivatives, including AD2 - SHLIB_CFLAGS="-fpic" - SHLIB_LD="ld -shared" - SHLIB_LD_LIBS="" - SHLIB_SUFFIX=".so" - DL_OBJS="tclLoadDl.o" - DL_LIBS="" - LDFLAGS="" - LD_SEARCH_FLAGS="" - ;; - OSF1-V*) - # Digital OSF/1 - SHLIB_CFLAGS="" - SHLIB_LD='ld -shared -expect_unresolved "*"' - SHLIB_LD_LIBS="" - SHLIB_SUFFIX=".so" - DL_OBJS="tclLoadDl.o" - DL_LIBS="" - LDFLAGS="" - LD_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' - ;; - RISCos-*) - SHLIB_CFLAGS="-G 0" - SHLIB_LD="echo tclLdAout $CC \{$SHLIB_CFLAGS\} | `pwd`/tclsh -r -G 0" - SHLIB_LD_LIBS='${LIBS}' - SHLIB_SUFFIX=".a" - DL_OBJS="tclLoadAout.o" - DL_LIBS="" - LDFLAGS="-Wl,-D,08000000" - LD_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}' - ;; - SCO_SV-3.2*) - # Note, dlopen is available only on SCO 3.2.5 and greater. However, - # this test works, since "uname -s" was non-standard in 3.2.4 and - # below. - SHLIB_CFLAGS="-Kpic -belf" - SHLIB_LD="ld -G" - SHLIB_LD_LIBS="" - SHLIB_SUFFIX=".so" - DL_OBJS="tclLoadDl.o" - DL_LIBS="" - LDFLAGS="-belf -Wl,-Bexport" - LD_SEARCH_FLAGS="" - ;; - SINIX*5.4*) - SHLIB_CFLAGS="-K PIC" - SHLIB_LD="cc -G" - SHLIB_LD_LIBS="" - SHLIB_SUFFIX=".so" - DL_OBJS="tclLoadDl.o" - DL_LIBS="-ldl" - LDFLAGS="" - LD_SEARCH_FLAGS="" - ;; - SunOS-4*) - SHLIB_CFLAGS="-PIC" - SHLIB_LD="ld" - SHLIB_LD_LIBS="" - SHLIB_SUFFIX=".so" - DL_OBJS="tclLoadDl.o" - DL_LIBS="-ldl" - LDFLAGS="" - LD_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}' - - # SunOS can't handle version numbers with dots in them in library - # specs, like -ltcl7.5, so use -ltcl75 instead. Also, it - # requires an extra version number at the end of .so file names. - # So, the library has to have a name like libtcl75.so.1.0 - - SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}\$\{DBGX\}.so.1.0' - UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}\$\{DBGX\}.a' - TCL_LIB_VERSIONS_OK=nodots - ;; - SunOS-5.[[0-6]]*) - SHLIB_CFLAGS="-KPIC" - SHLIB_LD="/usr/ccs/bin/ld -G -z text" - - # Note: need the LIBS below, otherwise Tk won't find Tcl's - # symbols when dynamically loaded into tclsh. - - SHLIB_LD_LIBS='${LIBS}' - SHLIB_SUFFIX=".so" - DL_OBJS="tclLoadDl.o" - DL_LIBS="-ldl" - LDFLAGS="" - LD_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}' - ;; - SunOS-5*) - SHLIB_CFLAGS="-KPIC" - SHLIB_LD="/usr/ccs/bin/ld -G -z text" - LDFLAGS="" - - do64bit_ok=no - if test "$do64bit" = "yes" ; then - arch=`isainfo` - if test "$arch" = "sparcv9 sparc" ; then - if test "$CC" != "gcc" -a `$CC -v 2>&1 | grep -c gcc` = "0" ; then - do64bit_ok=yes - EXTRA_CFLAGS="-xarch=v9" - LDFLAGS="-xarch=v9" - else - AC_MSG_WARN("64bit mode not supported using GCC on $system") - fi - else - AC_MSG_WARN("64bit mode only supported sparcv9 system") - fi - fi - - # Note: need the LIBS below, otherwise Tk won't find Tcl's - # symbols when dynamically loaded into tclsh. - - SHLIB_LD_LIBS='${LIBS}' - SHLIB_SUFFIX=".so" - DL_OBJS="tclLoadDl.o" - DL_LIBS="-ldl" - if test "$CC" = "gcc" -o `$CC -v 2>&1 | grep -c gcc` != "0" ; then - LD_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}' - else - LD_SEARCH_FLAGS='-R ${LIB_RUNTIME_DIR}' - fi - ;; - ULTRIX-4.*) - SHLIB_CFLAGS="-G 0" - SHLIB_SUFFIX=".a" - SHLIB_LD="echo tclLdAout $CC \{$SHLIB_CFLAGS\} | `pwd`/tclsh -r -G 0" - SHLIB_LD_LIBS='${LIBS}' - DL_OBJS="tclLoadAout.o" - DL_LIBS="" - LDFLAGS="-Wl,-D,08000000" - LD_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}' - ;; - UNIX_SV* | UnixWare-5*) - SHLIB_CFLAGS="-KPIC" - SHLIB_LD="cc -G" - SHLIB_LD_LIBS="" - SHLIB_SUFFIX=".so" - DL_OBJS="tclLoadDl.o" - DL_LIBS="-ldl" - # Some UNIX_SV* systems (unixware 1.1.2 for example) have linkers - # that don't grok the -Bexport option. Test that it does. - hold_ldflags=$LDFLAGS - AC_MSG_CHECKING(for ld accepts -Bexport flag) - LDFLAGS="${LDFLAGS} -Wl,-Bexport" - AC_TRY_LINK(, [int i;], found=yes, found=no) - LDFLAGS=$hold_ldflags - AC_MSG_RESULT($found) - if test $found = yes; then - LDFLAGS="-Wl,-Bexport" - else - LDFLAGS="" - fi - LD_SEARCH_FLAGS="" - ;; - esac - - if test "$do64bit" = "yes" -a "$do64bit_ok" = "no" ; then - AC_MSG_WARN("64bit support being disabled -- not supported on this platform") - fi - - # Step 4: If pseudo-static linking is in use (see K. B. Kenny, "Dynamic - # Loading for Tcl -- What Became of It?". Proc. 2nd Tcl/Tk Workshop, - # New Orleans, LA, Computerized Processes Unlimited, 1994), then we need - # to determine which of several header files defines the a.out file - # format (a.out.h, sys/exec.h, or sys/exec_aout.h). At present, we - # support only a file format that is more or less version-7-compatible. - # In particular, - # - a.out files must begin with `struct exec'. - # - the N_TXTOFF on the `struct exec' must compute the seek address - # of the text segment - # - The `struct exec' must contain a_magic, a_text, a_data, a_bss - # and a_entry fields. - # The following compilation should succeed if and only if either sys/exec.h - # or a.out.h is usable for the purpose. - # - # Note that the modified COFF format used on MIPS Ultrix 4.x is usable; the - # `struct exec' includes a second header that contains information that - # duplicates the v7 fields that are needed. - - if test "x$DL_OBJS" = "xtclLoadAout.o" ; then - AC_MSG_CHECKING(sys/exec.h) - AC_TRY_COMPILE([#include ],[ - struct exec foo; - unsigned long seek; - int flag; -#if defined(__mips) || defined(mips) - seek = N_TXTOFF (foo.ex_f, foo.ex_o); -#else - seek = N_TXTOFF (foo); -#endif - flag = (foo.a_magic == OMAGIC); - return foo.a_text + foo.a_data + foo.a_bss + foo.a_entry; - ], tcl_ok=usable, tcl_ok=unusable) - AC_MSG_RESULT($tcl_ok) - if test $tcl_ok = usable; then - AC_DEFINE(USE_SYS_EXEC_H) - else - AC_MSG_CHECKING(a.out.h) - AC_TRY_COMPILE([#include ],[ - struct exec foo; - unsigned long seek; - int flag; -#if defined(__mips) || defined(mips) - seek = N_TXTOFF (foo.ex_f, foo.ex_o); -#else - seek = N_TXTOFF (foo); -#endif - flag = (foo.a_magic == OMAGIC); - return foo.a_text + foo.a_data + foo.a_bss + foo.a_entry; - ], tcl_ok=usable, tcl_ok=unusable) - AC_MSG_RESULT($tcl_ok) - if test $tcl_ok = usable; then - AC_DEFINE(USE_A_OUT_H) - else - AC_MSG_CHECKING(sys/exec_aout.h) - AC_TRY_COMPILE([#include ],[ - struct exec foo; - unsigned long seek; - int flag; -#if defined(__mips) || defined(mips) - seek = N_TXTOFF (foo.ex_f, foo.ex_o); -#else - seek = N_TXTOFF (foo); -#endif - flag = (foo.a_midmag == OMAGIC); - return foo.a_text + foo.a_data + foo.a_bss + foo.a_entry; - ], tcl_ok=usable, tcl_ok=unusable) - AC_MSG_RESULT($tcl_ok) - if test $tcl_ok = usable; then - AC_DEFINE(USE_SYS_EXEC_AOUT_H) - else - DL_OBJS="" - fi - fi - fi - fi - - # Step 5: disable dynamic loading if requested via a command-line switch. - - AC_ARG_ENABLE(load, [ --disable-load disallow dynamic loading and "load" command], - [tcl_ok=$enableval], [tcl_ok=yes]) - if test "$tcl_ok" = "no"; then - DL_OBJS="" - fi - - if test "x$DL_OBJS" != "x" ; then - BUILD_DLTEST="\$(DLTEST_TARGETS)" - else - echo "Can't figure out how to do dynamic loading or shared libraries" - echo "on this system." - SHLIB_CFLAGS="" - SHLIB_LD="" - SHLIB_SUFFIX="" - DL_OBJS="tclLoadNone.o" - DL_LIBS="" - LDFLAGS="" - LD_SEARCH_FLAGS="" - BUILD_DLTEST="" - fi - - # If we're running gcc, then change the C flags for compiling shared - # libraries to the right flags for gcc, instead of those for the - # standard manufacturer compiler. - - if test "$DL_OBJS" != "tclLoadNone.o" ; then - if test "$CC" = "gcc" -o `$CC -v 2>&1 | grep -c gcc` != "0" ; then - case $system in - AIX-*) - ;; - BSD/OS*) - ;; - IRIX*) - ;; - NetBSD-*|FreeBSD-*|OpenBSD-*) - ;; - RISCos-*) - ;; - ULTRIX-4.*) - ;; - *) - SHLIB_CFLAGS="-fPIC" - ;; - esac - fi - fi - - if test "$SHARED_LIB_SUFFIX" = "" ; then - SHARED_LIB_SUFFIX='${VERSION}\$\{DBGX\}${SHLIB_SUFFIX}' - fi - if test "$UNSHARED_LIB_SUFFIX" = "" ; then - UNSHARED_LIB_SUFFIX='${VERSION}\$\{DBGX\}.a' - fi - - AC_SUBST(STLIB_LD) - AC_SUBST(SHLIB_LD) - AC_SUBST(SHLIB_CFLAGS) - AC_SUBST(SHLIB_LDFLAGS) - AC_SUBST(DL_LIBS) - AC_SUBST(CFLAGS_DEBUG) - AC_SUBST(CFLAGS_OPTIMIZE) - AC_SUBST(LDFLAGS_DEBUG) - AC_SUBST(LDFLAGS_OPTIMIZE) -]) - -#-------------------------------------------------------------------- -# SC_SERIAL_PORT -# -# Determine which interface to use to talk to the serial port. -# Note that #include lines must begin in leftmost column for -# some compilers to recognize them as preprocessor directives. -# -# Arguments: -# none -# -# Results: -# -# Defines only one of the following vars: -# USE_TERMIOS -# USE_TERMIO -# USE_SGTTY -# -#-------------------------------------------------------------------- - -AC_DEFUN(SC_SERIAL_PORT, [ - AC_MSG_CHECKING([termios vs. termio vs. sgtty]) - - AC_TRY_RUN([ -#include - -main() -{ - struct termios t; - if (tcgetattr(0, &t) == 0) { - cfsetospeed(&t, 0); - t.c_cflag |= PARENB | PARODD | CSIZE | CSTOPB; - return 0; - } - return 1; -}], tk_ok=termios, tk_ok=no, tk_ok=no) - - if test $tk_ok = termios; then - AC_DEFINE(USE_TERMIOS) - else - AC_TRY_RUN([ -#include - -main() -{ - struct termio t; - if (ioctl(0, TCGETA, &t) == 0) { - t.c_cflag |= CBAUD | PARENB | PARODD | CSIZE | CSTOPB; - return 0; - } - return 1; - }], tk_ok=termio, tk_ok=no, tk_ok=no) - - if test $tk_ok = termio; then - AC_DEFINE(USE_TERMIO) - else - AC_TRY_RUN([ -#include - -main() -{ - struct sgttyb t; - if (ioctl(0, TIOCGETP, &t) == 0) { - t.sg_ospeed = 0; - t.sg_flags |= ODDP | EVENP | RAW; - return 0; - } - return 1; -}], tk_ok=sgtty, tk_ok=none, tk_ok=none) - - if test $tk_ok = sgtty; then - AC_DEFINE(USE_SGTTY) - else - AC_TRY_RUN([ -#include -#include - -main() -{ - struct termios t; - if (tcgetattr(0, &t) == 0 - || errno == ENOTTY || errno == ENXIO || errno == EINVAL) { - cfsetospeed(&t, 0); - t.c_cflag |= PARENB | PARODD | CSIZE | CSTOPB; - return 0; - } - return 1; -}], tk_ok=termios, tk_ok=no, tk_ok=no) - - if test $tk_ok = termios; then - AC_DEFINE(USE_TERMIOS) - else - AC_TRY_RUN([ -#include -#include - -main() -{ - struct termio t; - if (ioctl(0, TCGETA, &t) == 0 - || errno == ENOTTY || errno == ENXIO || errno == EINVAL) { - t.c_cflag |= CBAUD | PARENB | PARODD | CSIZE | CSTOPB; - return 0; - } - return 1; - }], tk_ok=termio, tk_ok=no, tk_ok=no) - - if test $tk_ok = termio; then - AC_DEFINE(USE_TERMIO) - else - AC_TRY_RUN([ -#include -#include - -main() -{ - struct sgttyb t; - if (ioctl(0, TIOCGETP, &t) == 0 - || errno == ENOTTY || errno == ENXIO || errno == EINVAL) { - t.sg_ospeed = 0; - t.sg_flags |= ODDP | EVENP | RAW; - return 0; - } - return 1; -}], tk_ok=sgtty, tk_ok=none, tk_ok=none) - - if test $tk_ok = sgtty; then - AC_DEFINE(USE_SGTTY) - fi - fi - fi - fi - fi - fi - AC_MSG_RESULT($tk_ok) -]) - -#-------------------------------------------------------------------- -# SC_MISSING_POSIX_HEADERS -# -# Supply substitutes for missing POSIX header files. Special -# notes: -# - stdlib.h doesn't define strtol, strtoul, or -# strtod insome versions of SunOS -# - some versions of string.h don't declare procedures such -# as strstr -# -# Arguments: -# none -# -# Results: -# -# Defines some of the following vars: -# NO_DIRENT_H -# NO_ERRNO_H -# NO_VALUES_H -# NO_LIMITS_H -# NO_STDLIB_H -# NO_STRING_H -# NO_SYS_WAIT_H -# NO_DLFCN_H -# HAVE_UNISTD_H -# HAVE_SYS_PARAM_H -# -# HAVE_STRING_H ? -# -#-------------------------------------------------------------------- - -AC_DEFUN(SC_MISSING_POSIX_HEADERS, [ - - AC_MSG_CHECKING(dirent.h) - AC_TRY_LINK([#include -#include ], [ -#ifndef _POSIX_SOURCE -# ifdef __Lynx__ - /* - * Generate compilation error to make the test fail: Lynx headers - * are only valid if really in the POSIX environment. - */ - - missing_procedure(); -# endif -#endif -DIR *d; -struct dirent *entryPtr; -char *p; -d = opendir("foobar"); -entryPtr = readdir(d); -p = entryPtr->d_name; -closedir(d); -], tcl_ok=yes, tcl_ok=no) - - if test $tcl_ok = no; then - AC_DEFINE(NO_DIRENT_H) - fi - - AC_MSG_RESULT($tcl_ok) - AC_CHECK_HEADER(errno.h, , AC_DEFINE(NO_ERRNO_H)) - AC_CHECK_HEADER(float.h, , AC_DEFINE(NO_FLOAT_H)) - AC_CHECK_HEADER(values.h, , AC_DEFINE(NO_VALUES_H)) - AC_CHECK_HEADER(limits.h, , AC_DEFINE(NO_LIMITS_H)) - AC_CHECK_HEADER(stdlib.h, tcl_ok=1, tcl_ok=0) - AC_EGREP_HEADER(strtol, stdlib.h, , tcl_ok=0) - AC_EGREP_HEADER(strtoul, stdlib.h, , tcl_ok=0) - AC_EGREP_HEADER(strtod, stdlib.h, , tcl_ok=0) - if test $tcl_ok = 0; then - AC_DEFINE(NO_STDLIB_H) - fi - AC_CHECK_HEADER(string.h, tcl_ok=1, tcl_ok=0) - AC_EGREP_HEADER(strstr, string.h, , tcl_ok=0) - AC_EGREP_HEADER(strerror, string.h, , tcl_ok=0) - - # See also memmove check below for a place where NO_STRING_H can be - # set and why. - - if test $tcl_ok = 0; then - AC_DEFINE(NO_STRING_H) - fi - - AC_CHECK_HEADER(sys/wait.h, , AC_DEFINE(NO_SYS_WAIT_H)) - AC_CHECK_HEADER(dlfcn.h, , AC_DEFINE(NO_DLFCN_H)) - - # OS/390 lacks sys/param.h (and doesn't need it, by chance). - - AC_HAVE_HEADERS(unistd.h sys/param.h) - -]) - -#-------------------------------------------------------------------- -# SC_PATH_X -# -# Locate the X11 header files and the X11 library archive. Try -# the ac_path_x macro first, but if it doesn't find the X stuff -# (e.g. because there's no xmkmf program) then check through -# a list of possible directories. Under some conditions the -# autoconf macro will return an include directory that contains -# no include files, so double-check its result just to be safe. -# -# Arguments: -# none -# -# Results: -# -# Sets the the following vars: -# XINCLUDES -# XLIBSW -# -#-------------------------------------------------------------------- - -AC_DEFUN(SC_PATH_X, [ - AC_PATH_X - not_really_there="" - if test "$no_x" = ""; then - if test "$x_includes" = ""; then - AC_TRY_CPP([#include ], , not_really_there="yes") - else - if test ! -r $x_includes/X11/Intrinsic.h; then - not_really_there="yes" - fi - fi - fi - if test "$no_x" = "yes" -o "$not_really_there" = "yes"; then - AC_MSG_CHECKING(for X11 header files) - XINCLUDES="# no special path needed" - AC_TRY_CPP([#include ], , XINCLUDES="nope") - if test "$XINCLUDES" = nope; then - dirs="/usr/unsupported/include /usr/local/include /usr/X386/include /usr/X11R6/include /usr/X11R5/include /usr/include/X11R5 /usr/include/X11R4 /usr/openwin/include /usr/X11/include /usr/sww/include" - for i in $dirs ; do - if test -r $i/X11/Intrinsic.h; then - AC_MSG_RESULT($i) - XINCLUDES=" -I$i" - break - fi - done - fi - else - if test "$x_includes" != ""; then - XINCLUDES=-I$x_includes - else - XINCLUDES="# no special path needed" - fi - fi - if test "$XINCLUDES" = nope; then - AC_MSG_RESULT(couldn't find any!) - XINCLUDES="# no include files found" - fi - - if test "$no_x" = yes; then - AC_MSG_CHECKING(for X11 libraries) - XLIBSW=nope - dirs="/usr/unsupported/lib /usr/local/lib /usr/X386/lib /usr/X11R6/lib /usr/X11R5/lib /usr/lib/X11R5 /usr/lib/X11R4 /usr/openwin/lib /usr/X11/lib /usr/sww/X11/lib" - for i in $dirs ; do - if test -r $i/libX11.a -o -r $i/libX11.so -o -r $i/libX11.sl; then - AC_MSG_RESULT($i) - XLIBSW="-L$i -lX11" - x_libraries="$i" - break - fi - done - else - if test "$x_libraries" = ""; then - XLIBSW=-lX11 - else - XLIBSW="-L$x_libraries -lX11" - fi - fi - if test "$XLIBSW" = nope ; then - AC_CHECK_LIB(Xwindow, XCreateWindow, XLIBSW=-lXwindow) - fi - if test "$XLIBSW" = nope ; then - AC_MSG_RESULT(couldn't find any! Using -lX11.) - XLIBSW=-lX11 - fi -]) -#-------------------------------------------------------------------- -# SC_BLOCKING_STYLE -# -# The statements below check for systems where POSIX-style -# non-blocking I/O (O_NONBLOCK) doesn't work or is unimplemented. -# On these systems (mostly older ones), use the old BSD-style -# FIONBIO approach instead. -# -# Arguments: -# none -# -# Results: -# -# Defines some of the following vars: -# HAVE_SYS_IOCTL_H -# HAVE_SYS_FILIO_H -# USE_FIONBIO -# O_NONBLOCK -# -#-------------------------------------------------------------------- - -AC_DEFUN(SC_BLOCKING_STYLE, [ - AC_CHECK_HEADERS(sys/ioctl.h) - AC_CHECK_HEADERS(sys/filio.h) - AC_MSG_CHECKING([FIONBIO vs. O_NONBLOCK for nonblocking I/O]) - if test -f /usr/lib/NextStep/software_version; then - system=NEXTSTEP-`awk '/3/,/3/' /usr/lib/NextStep/software_version` - else - system=`uname -s`-`uname -r` - if test "$?" -ne 0 ; then - system=unknown - else - # Special check for weird MP-RAS system (uname returns weird - # results, and the version is kept in special file). - - if test -r /etc/.relid -a "X`uname -n`" = "X`uname -s`" ; then - system=MP-RAS-`awk '{print $3}' /etc/.relid'` - fi - if test "`uname -s`" = "AIX" ; then - system=AIX-`uname -v`.`uname -r` - fi - fi - fi - case $system in - # There used to be code here to use FIONBIO under AIX. However, it - # was reported that FIONBIO doesn't work under AIX 3.2.5. Since - # using O_NONBLOCK seems fine under AIX 4.*, I removed the FIONBIO - # code (JO, 5/31/97). - - OSF*) - AC_DEFINE(USE_FIONBIO) - AC_MSG_RESULT(FIONBIO) - ;; - SunOS-4*) - AC_DEFINE(USE_FIONBIO) - AC_MSG_RESULT(FIONBIO) - ;; - ULTRIX-4.*) - AC_DEFINE(USE_FIONBIO) - AC_MSG_RESULT(FIONBIO) - ;; - *) - AC_MSG_RESULT(O_NONBLOCK) - ;; - esac -]) - -#-------------------------------------------------------------------- -# SC_HAVE_VFORK -# -# Check to see whether the system provides a vfork kernel call. -# If not, then use fork instead. Also, check for a problem with -# vforks and signals that can cause core dumps if a vforked child -# resets a signal handler. If the problem exists, then use fork -# instead of vfork. -# -# Arguments: -# none -# -# Results: -# -# Defines some of the following vars: -# vfork (=fork) -# -#-------------------------------------------------------------------- - -AC_DEFUN(SC_HAVE_VFORK, [ - AC_TYPE_SIGNAL() - AC_CHECK_FUNC(vfork, tcl_ok=1, tcl_ok=0) - if test "$tcl_ok" = 1; then - AC_MSG_CHECKING([vfork/signal bug]); - AC_TRY_RUN([ -#include -#include -#include -int gotSignal = 0; -sigProc(sig) - int sig; -{ - gotSignal = 1; -} -main() -{ - int pid, sts; - (void) signal(SIGCHLD, sigProc); - pid = vfork(); - if (pid < 0) { - exit(1); - } else if (pid == 0) { - (void) signal(SIGCHLD, SIG_DFL); - _exit(0); - } else { - (void) wait(&sts); - } - exit((gotSignal) ? 0 : 1); -}], tcl_ok=1, tcl_ok=0, tcl_ok=0) - - if test "$tcl_ok" = 1; then - AC_MSG_RESULT(ok) - else - AC_MSG_RESULT([buggy, using fork instead]) - fi - fi - rm -f core - if test "$tcl_ok" = 0; then - AC_DEFINE(vfork, fork) - fi -]) - -#-------------------------------------------------------------------- -# SC_TIME_HANLDER -# -# Checks how the system deals with time.h, what time structures -# are used on the system, and what fields the structures have. -# -# Arguments: -# none -# -# Results: -# -# Defines some of the following vars: -# USE_DELTA_FOR_TZ -# HAVE_TM_GMTOFF -# HAVE_TM_TZADJ -# HAVE_TIMEZONE_VAR -# -#-------------------------------------------------------------------- - -AC_DEFUN(SC_TIME_HANDLER, [ - AC_CHECK_HEADERS(sys/time.h) - AC_HEADER_TIME - AC_STRUCT_TIMEZONE - - AC_MSG_CHECKING([tm_tzadj in struct tm]) - AC_TRY_COMPILE([#include ], [struct tm tm; tm.tm_tzadj;], - [AC_DEFINE(HAVE_TM_TZADJ) - AC_MSG_RESULT(yes)], - AC_MSG_RESULT(no)) - - AC_MSG_CHECKING([tm_gmtoff in struct tm]) - AC_TRY_COMPILE([#include ], [struct tm tm; tm.tm_gmtoff;], - [AC_DEFINE(HAVE_TM_GMTOFF) - AC_MSG_RESULT(yes)], - AC_MSG_RESULT(no)) - - # - # Its important to include time.h in this check, as some systems - # (like convex) have timezone functions, etc. - # - have_timezone=no - AC_MSG_CHECKING([long timezone variable]) - AC_TRY_COMPILE([#include ], - [extern long timezone; - timezone += 1; - exit (0);], - [have_timezone=yes - AC_DEFINE(HAVE_TIMEZONE_VAR) - AC_MSG_RESULT(yes)], - AC_MSG_RESULT(no)) - - # - # On some systems (eg IRIX 6.2), timezone is a time_t and not a long. - # - if test "$have_timezone" = no; then - AC_MSG_CHECKING([time_t timezone variable]) - AC_TRY_COMPILE([#include ], - [extern time_t timezone; - timezone += 1; - exit (0);], - [AC_DEFINE(HAVE_TIMEZONE_VAR) - AC_MSG_RESULT(yes)], - AC_MSG_RESULT(no)) - fi - - # - # AIX does not have a timezone field in struct tm. When the AIX bsd - # library is used, the timezone global and the gettimeofday methods are - # to be avoided for timezone deduction instead, we deduce the timezone - # by comparing the localtime result on a known GMT value. - # - - if test "`uname -s`" = "AIX" ; then - AC_CHECK_LIB(bsd, gettimeofday, libbsd=yes) - if test $libbsd = yes; then - AC_DEFINE(USE_DELTA_FOR_TZ) - fi - fi -]) - -#-------------------------------------------------------------------- -# SC_BUGGY_STRTOD -# -# Under Solaris 2.4, strtod returns the wrong value for the -# terminating character under some conditions. Check for this -# and if the problem exists use a substitute procedure -# "fixstrtod" (provided by Tcl) that corrects the error. -# -# Arguments: -# none -# -# Results: -# -# Might defines some of the following vars: -# strtod (=fixstrtod) -# -#-------------------------------------------------------------------- - -AC_DEFUN(SC_BUGGY_STRTOD, [ - AC_CHECK_FUNC(strtod, tcl_strtod=1, tcl_strtod=0) - if test "$tcl_strtod" = 1; then - AC_MSG_CHECKING([for Solaris2.4/Tru64 strtod bugs]) - AC_TRY_RUN([ - extern double strtod(); - int main() - { - char *string = "NaN", *spaceString = " "; - char *term; - double value; - value = strtod(string, &term); - if ((term != string) && (term[-1] == 0)) { - exit(1); - } - value = strtod(spaceString, &term); - if (term == (spaceString+1)) { - exit(1); - } - exit(0); - }], tcl_ok=1, tcl_ok=0, tcl_ok=0) - if test "$tcl_ok" = 1; then - AC_MSG_RESULT(ok) - else - AC_MSG_RESULT(buggy) - LIBOBJS="$LIBOBJS fixstrtod.o" - AC_DEFINE(strtod, fixstrtod) - fi - fi -]) - -#-------------------------------------------------------------------- -# SC_TCL_LINK_LIBS -# -# Search for the libraries needed to link the Tcl shell. -# Things like the math library (-lm) and socket stuff (-lsocket vs. -# -lnsl) are dealt with here. -# -# Arguments: -# Requires the following vars to be set in the Makefile: -# DL_LIBS -# LIBS -# MATH_LIBS -# -# Results: -# -# Subst's the following var: -# TCL_LIBS -# MATH_LIBS -# -# Might append to the following vars: -# LIBS -# -# Might define the following vars: -# HAVE_NET_ERRNO_H -# -#-------------------------------------------------------------------- - -AC_DEFUN(SC_TCL_LINK_LIBS, [ - #-------------------------------------------------------------------- - # On a few very rare systems, all of the libm.a stuff is - # already in libc.a. Set compiler flags accordingly. - # Also, Linux requires the "ieee" library for math to work - # right (and it must appear before "-lm"). - #-------------------------------------------------------------------- - - AC_CHECK_FUNC(sin, MATH_LIBS="", MATH_LIBS="-lm") - AC_CHECK_LIB(ieee, main, [MATH_LIBS="-lieee $MATH_LIBS"]) - - #-------------------------------------------------------------------- - # On AIX systems, libbsd.a has to be linked in to support - # non-blocking file IO. This library has to be linked in after - # the MATH_LIBS or it breaks the pow() function. The way to - # insure proper sequencing, is to add it to the tail of MATH_LIBS. - # This library also supplies gettimeofday. - #-------------------------------------------------------------------- - - libbsd=no - if test "`uname -s`" = "AIX" ; then - AC_CHECK_LIB(bsd, gettimeofday, libbsd=yes) - if test $libbsd = yes; then - MATH_LIBS="$MATH_LIBS -lbsd" - fi - fi - - - #-------------------------------------------------------------------- - # Interactive UNIX requires -linet instead of -lsocket, plus it - # needs net/errno.h to define the socket-related error codes. - #-------------------------------------------------------------------- - - AC_CHECK_LIB(inet, main, [LIBS="$LIBS -linet"]) - AC_CHECK_HEADER(net/errno.h, AC_DEFINE(HAVE_NET_ERRNO_H)) - - #-------------------------------------------------------------------- - # Check for the existence of the -lsocket and -lnsl libraries. - # The order here is important, so that they end up in the right - # order in the command line generated by make. Here are some - # special considerations: - # 1. Use "connect" and "accept" to check for -lsocket, and - # "gethostbyname" to check for -lnsl. - # 2. Use each function name only once: can't redo a check because - # autoconf caches the results of the last check and won't redo it. - # 3. Use -lnsl and -lsocket only if they supply procedures that - # aren't already present in the normal libraries. This is because - # IRIX 5.2 has libraries, but they aren't needed and they're - # bogus: they goof up name resolution if used. - # 4. On some SVR4 systems, can't use -lsocket without -lnsl too. - # To get around this problem, check for both libraries together - # if -lsocket doesn't work by itself. - #-------------------------------------------------------------------- - - tcl_checkBoth=0 - AC_CHECK_FUNC(connect, tcl_checkSocket=0, tcl_checkSocket=1) - if test "$tcl_checkSocket" = 1; then - AC_CHECK_LIB(socket, main, LIBS="$LIBS -lsocket", tcl_checkBoth=1) - fi - if test "$tcl_checkBoth" = 1; then - tk_oldLibs=$LIBS - LIBS="$LIBS -lsocket -lnsl" - AC_CHECK_FUNC(accept, tcl_checkNsl=0, [LIBS=$tk_oldLibs]) - fi - AC_CHECK_FUNC(gethostbyname, , AC_CHECK_LIB(nsl, main, - [LIBS="$LIBS -lnsl"])) - - # Don't perform the eval of the libraries here because DL_LIBS - # won't be set until we call SC_CONFIG_CFLAGS - - TCL_LIBS='${DL_LIBS} ${LIBS} ${MATH_LIBS}' - AC_SUBST(TCL_LIBS) - AC_SUBST(MATH_LIBS) -]) - -#------------------------------------------------------------------------ -# SC_MAKE_LIB -- -# -# Generate a line that can be used to build a shared/unshared library -# in a platform independent manner. -# -# Arguments: -# none -# -# Requires: -# -# Results: -# -# Defines the following vars: -# MAKE_LIB Makefile rule for building a library -# MAKE_SHARED_LIB Makefile rule for building a shared library -# MAKE_UNSHARED_LIB Makefile rule for building a static -# library -#------------------------------------------------------------------------ - -AC_DEFUN(SC_MAKE_LIB, [ - case "`uname -s`" in - *win32* | *WIN32* | *CYGWIN_NT* |*CYGWIN_98*|*CYGWIN_95*) - if test "${CC-cc}" = "cl"; then - MAKE_STATIC_LIB="\${STLIB_LD} -out:\[$]@ \$(\[$]@_OBJECTS) " - MAKE_SHARED_LIB="\${SHLIB_LD} \${SHLIB_LDFLAGS} \${SHLIB_LD_LIBS} \$(LDFLAGS) -out:\[$]@ \$(\[$]@_OBJECTS) " - fi - ;; - *) - MAKE_STATIC_LIB="\${STLIB_LD} \[$]@ \$(\[$]@_OBJECTS)" - MAKE_SHARED_LIB="\${SHLIB_LD} -o \[$]@ \$(\[$]@_OBJECTS) \${SHLIB_LDFLAGS} \${SHLIB_LD_LIBS}" - ;; - esac - - if test "${SHARED_BUILD}" = "1" ; then - MAKE_LIB=${MAKE_SHARED_LIB} - else - MAKE_LIB=${MAKE_STATIC_LIB} - fi - - AC_SUBST(MAKE_LIB) - AC_SUBST(MAKE_SHARED_LIB) - AC_SUBST(MAKE_STATIC_LIB) -]) - -#------------------------------------------------------------------------ -# SC_LIB_SPEC -- -# -# Compute the name of an existing object library located in libdir -# from the given base name and produce the appropriate linker flags. -# -# Arguments: -# basename The base name of the library without version -# numbers, extensions, or "lib" prefixes. -# extra_dir Extra directory in which to search for the -# library. This location is used first, then -# $prefix/$exec-prefix, then some defaults. -# -# Requires: -# CYGPATH command used to generate native style paths -# -# Results: -# -# Defines the following vars: -# ${basename}_LIB_NAME The computed library name. -# ${basename}_LIB_SPEC The computed linker flags. -#------------------------------------------------------------------------ - -AC_DEFUN(SC_LIB_SPEC, [ - AC_MSG_CHECKING(for $1 library) - - # Look in exec-prefix and prefix for the library. If neither of - # these were specified, look in libdir. It doesn't matter if libdir - # wasn't specified since a search in the unspecified directory will - # fail (NONE/lib) - - if test x"${exec_prefix}" != x"NONE" ; then - sc_lib_name_dir="${exec_prefix}/lib" - elif test x"${prefix}" != x"NONE" ; then - sc_lib_name_dir="${prefix}/lib" - else - eval "sc_lib_name_dir=${libdir}" - fi - - if test x"$2" != x ; then - sc_extra_lib_dir=$2 - else - sc_extra_lib_dir=NONE - fi - - for i in \ - `ls -dr ${sc_extra_lib_dir}/$1[[0-9]]*.lib 2>/dev/null ` \ - `ls -dr ${sc_extra_lib_dir}/$1.lib 2>/dev/null ` \ - `ls -dr ${sc_extra_lib_dir}/lib$1[[0-9]]* 2>/dev/null ` \ - `ls -dr ${sc_extra_lib_dir}/lib$1.* 2>/dev/null ` \ - `ls -dr ${sc_lib_name_dir}/$1[[0-9]]*.lib 2>/dev/null ` \ - `ls -dr ${sc_lib_name_dir}/$1.lib 2>/dev/null ` \ - `ls -dr ${sc_lib_name_dir}/lib$1[[0-9]]* 2>/dev/null ` \ - `ls -dr ${sc_lib_name_dir}/lib$1.* 2>/dev/null ` \ - `ls -dr /usr/lib/$1[[0-9]]*.lib 2>/dev/null ` \ - `ls -dr /usr/lib/$1.lib 2>/dev/null ` \ - `ls -dr /usr/lib/lib$1[[0-9]]* 2>/dev/null ` \ - `ls -dr /usr/lib/lib$1.* 2>/dev/null ` \ - `ls -dr /usr/local/lib/$1[[0-9]]*.lib 2>/dev/null ` \ - `ls -dr /usr/local/lib/$1.lib 2>/dev/null ` \ - `ls -dr /usr/local/lib/lib$1[[0-9]]* 2>/dev/null ` \ - `ls -dr /usr/local/lib/lib$1.* 2>/dev/null ` ; do - if test -f "$i" ; then - - sc_lib_name_dir=`dirname $i` - $1_LIB_NAME=`basename $i` - $1_LIB_PATH_NAME=$i - break - fi - done - - case "`uname -s`" in - *win32* | *WIN32* | *CYGWIN_NT* |*CYGWIN_98*|*CYGWIN_95*) - $1_LIB_SPEC=\"`${CYGPATH} ${$1_LIB_PATH_NAME}`\" - ;; - *) - # Strip off the leading "lib" and trailing ".a" or ".so" - - sc_lib_name_lib=`echo ${$1_LIB_NAME}|sed -e 's/^lib//' -e 's/\.[[^.]]*$//' -e 's/\.so.*//'` - $1_LIB_SPEC="-L${sc_lib_name_dir} -l${sc_lib_name_lib}" - ;; - esac - - if test "x${$1_LIB_NAME}" = x ; then - AC_MSG_ERROR(not found) - else - AC_MSG_RESULT(${$1_LIB_SPEC}) - fi -]) - -#------------------------------------------------------------------------ -# SC_PRIVATE_TCL_HEADERS -- -# -# Locate the private Tcl include files -# -# Arguments: -# -# Requires: -# TCL_SRC_DIR Assumes that SC_LOAD_TCLCONFIG has -# already been called. -# -# Results: -# -# Substs the following vars: -# TCL_TOP_DIR_NATIVE -# TCL_GENERIC_DIR_NATIVE -# TCL_UNIX_DIR_NATIVE -# TCL_WIN_DIR_NATIVE -# TCL_BMAP_DIR_NATIVE -# TCL_TOOL_DIR_NATIVE -# TCL_PLATFORM_DIR_NATIVE -# TCL_BIN_DIR_NATIVE -# TCL_INCLUDES -#------------------------------------------------------------------------ - -AC_DEFUN(SC_PRIVATE_TCL_HEADERS, [ - AC_MSG_CHECKING(for Tcl private include files) - - case "`uname -s`" in - *win32* | *WIN32* | *CYGWIN_NT* |*CYGWIN_98*|*CYGWIN_95*) - TCL_TOP_DIR_NATIVE=\"`${CYGPATH} ${TCL_SRC_DIR}`\" - TCL_GENERIC_DIR_NATIVE=\"`${CYGPATH} ${TCL_SRC_DIR}/generic`\" - TCL_UNIX_DIR_NATIVE=\"`${CYGPATH} ${TCL_SRC_DIR}/unix`\" - TCL_WIN_DIR_NATIVE=\"`${CYGPATH} ${TCL_SRC_DIR}/win`\" - TCL_BMAP_DIR_NATIVE=\"`${CYGPATH} ${TCL_SRC_DIR}/bitmaps`\" - TCL_TOOL_DIR_NATIVE=\"`${CYGPATH} ${TCL_SRC_DIR}/tools`\" - TCL_COMPAT_DIR_NATIVE=\"`${CYGPATH} ${TCL_SRC_DIR}/compat`\" - TCL_PLATFORM_DIR_NATIVE=${TCL_WIN_DIR_NATIVE} - ;; - *) - TCL_TOP_DIR_NATIVE='$(TCL_SRC_DIR)' - TCL_GENERIC_DIR_NATIVE='$(TCL_TOP_DIR_NATIVE)/generic' - TCL_UNIX_DIR_NATIVE='$(TCL_TOP_DIR_NATIVE)/unix' - TCL_WIN_DIR_NATIVE='$(TCL_TOP_DIR_NATIVE)/win' - TCL_BMAP_DIR_NATIVE='$(TCL_TOP_DIR_NATIVE)/bitmaps' - TCL_TOOL_DIR_NATIVE='$(TCL_TOP_DIR_NATIVE)/tools' - TCL_COMPAT_DIR_NATIVE='$(TCL_TOP_DIR_NATIVE)/compat' - TCL_PLATFORM_DIR_NATIVE=${TCL_UNIX_DIR_NATIVE} - ;; - esac - - AC_SUBST(TCL_TOP_DIR_NATIVE) - AC_SUBST(TCL_GENERIC_DIR_NATIVE) - AC_SUBST(TCL_UNIX_DIR_NATIVE) - AC_SUBST(TCL_WIN_DIR_NATIVE) - AC_SUBST(TCL_BMAP_DIR_NATIVE) - AC_SUBST(TCL_TOOL_DIR_NATIVE) - AC_SUBST(TCL_PLATFORM_DIR_NATIVE) - - TCL_INCLUDES="-I${TCL_GENERIC_DIR_NATIVE} -I${TCL_PLATFORM_DIR_NATIVE}" - AC_SUBST(TCL_INCLUDES) - AC_MSG_RESULT(Using srcdir found in tclConfig.sh) -]) - -#------------------------------------------------------------------------ -# SC_PUBLIC_TCL_HEADERS -- -# -# Locate the installed public Tcl header files -# -# Arguments: -# None. -# -# Requires: -# CYGPATH must be set -# -# Results: -# -# Adds a --with-tclinclude switch to configure. -# Result is cached. -# -# Substs the following vars: -# TCL_INCLUDES -#------------------------------------------------------------------------ - -AC_DEFUN(SC_PUBLIC_TCL_HEADERS, [ - AC_MSG_CHECKING(for Tcl public headers) - - AC_ARG_WITH(tclinclude, [ --with-tclinclude directory containing the public Tcl header files.], with_tclinclude=${withval}) - - if test x"${with_tclinclude}" != x ; then - if test -f "${with_tclinclude}/tcl.h" ; then - ac_cv_c_tclh=${with_tclinclude} - else - AC_MSG_ERROR([${with_tclinclude} directory does not contain Tcl public header file tcl.h]) - fi - else - AC_CACHE_VAL(ac_cv_c_tclh, [ - # Use the value from --with-tclinclude, if it was given - - if test x"${with_tclinclude}" != x ; then - ac_cv_c_tclh=${with_tclinclude} - else - # Check in the includedir, if --prefix was specified - - eval "temp_includedir=${includedir}" - for i in \ - `ls -d ${TCL_PREFIX}/include 2>/dev/null` \ - `ls -d ${temp_includedir} 2>/dev/null` \ - `ls -d ${TCL_BIN_DIR}/../include 2>/dev/null` \ - /usr/local/include /usr/include ; do - if test -f "$i/tcl.h" ; then - ac_cv_c_tclh=$i - break - fi - done - fi - ]) - fi - - # Print a message based on how we determined the include path - - if test x"${ac_cv_c_tclh}" = x ; then - AC_MSG_ERROR(tcl.h not found. Please specify its location with --with-tclinclude) - else - AC_MSG_RESULT(${ac_cv_c_tclh}) - fi - - # Convert to a native path and substitute into the output files. - - INCLUDE_DIR_NATIVE=`${CYGPATH} ${ac_cv_c_tclh}` - - TCL_INCLUDES=-I\"${INCLUDE_DIR_NATIVE}\" - - AC_SUBST(TCL_INCLUDES) -]) - -#------------------------------------------------------------------------ -# SC_PRIVATE_TK_HEADERS -- -# -# Locate the private Tk include files -# -# Arguments: -# -# Requires: -# TK_SRC_DIR Assumes that SC_LOAD_TKCONFIG has -# already been called. -# -# Results: -# -# Substs the following vars: -# TK_INCLUDES -#------------------------------------------------------------------------ - -AC_DEFUN(SC_PRIVATE_TK_HEADERS, [ - AC_MSG_CHECKING(for Tk private include files) - - case "`uname -s`" in - *win32* | *WIN32* | *CYGWIN_NT* |*CYGWIN_98*|*CYGWIN_95*) - TK_TOP_DIR_NATIVE=\"`${CYGPATH} ${TK_SRC_DIR}`\" - TK_UNIX_DIR_NATIVE=\"`${CYGPATH} ${TK_SRC_DIR}/unix`\" - TK_WIN_DIR_NATIVE=\"`${CYGPATH} ${TK_SRC_DIR}/win`\" - TK_GENERIC_DIR_NATIVE=\"`${CYGPATH} ${TK_SRC_DIR}/generic`\" - TK_XLIB_DIR_NATIVE=\"`${CYGPATH} ${TK_SRC_DIR}/xlib`\" - TK_PLATFORM_DIR_NATIVE=${TK_WIN_DIR_NATIVE} - - TK_INCLUDES="-I${TK_GENERIC_DIR_NATIVE} -I${TK_PLATFORM_DIR_NATIVE} -I${TK_XLIB_DIR_NATIVE}" - ;; - *) - TK_TOP_DIR_NATIVE='$(TK_SRC_DIR)' - TK_GENERIC_DIR_NATIVE='$(TK_TOP_DIR_NATIVE)/generic' - TK_UNIX_DIR_NATIVE='$(TK_TOP_DIR_NATIVE)/unix' - TK_WIN_DIR_NATIVE='$(TK_TOP_DIR_NATIVE)/win' - TK_PLATFORM_DIR_NATIVE=${TK_UNIX_DIR_NATIVE} - - TK_INCLUDES="-I${TK_GENERIC_DIR_NATIVE} -I${TK_PLATFORM_DIR_NATIVE}" - ;; - esac - - AC_SUBST(TK_TOP_DIR_NATIVE) - AC_SUBST(TK_UNIX_DIR_NATIVE) - AC_SUBST(TK_WIN_DIR_NATIVE) - AC_SUBST(TK_GENERIC_DIR_NATIVE) - AC_SUBST(TK_XLIB_DIR_NATIVE) - AC_SUBST(TK_PLATFORM_DIR_NATIVE) - - AC_SUBST(TK_INCLUDES) - AC_MSG_RESULT(Using srcdir found in tkConfig.sh) -]) - -#------------------------------------------------------------------------ -# SC_PUBLIC_TK_HEADERS -- -# -# Locate the installed public Tk header files -# -# Arguments: -# None. -# -# Requires: -# CYGPATH must be set -# -# Results: -# -# Adds a --with-tkinclude switch to configure. -# Result is cached. -# -# Substs the following vars: -# TK_INCLUDES -#------------------------------------------------------------------------ - -AC_DEFUN(SC_PUBLIC_TK_HEADERS, [ - AC_MSG_CHECKING(for Tk public headers) - - AC_ARG_WITH(tkinclude, [ --with-tkinclude directory containing the public Tk header files.], with_tkinclude=${withval}) - - if test x"${with_tkinclude}" != x ; then - if test -f "${with_tkinclude}/tk.h" ; then - ac_cv_c_tkh=${with_tkinclude} - else - AC_MSG_ERROR([${with_tkinclude} directory does not contain Tk public header file tk.h]) - fi - else - AC_CACHE_VAL(ac_cv_c_tkh, [ - # Use the value from --with-tkinclude, if it was given - - if test x"${with_tkinclude}" != x ; then - ac_cv_c_tkh=${with_tkinclude} - else - # Check in the includedir, if --prefix was specified - - eval "temp_includedir=${includedir}" - for i in \ - `ls -d ${TCL_PREFIX}/include 2>/dev/null` \ - `ls -d ${temp_includedir} 2>/dev/null` \ - `ls -d ${TCL_BIN_DIR}/../include 2>/dev/null` \ - /usr/local/include /usr/include ; do - if test -f "$i/tk.h" ; then - ac_cv_c_tkh=$i - break - fi - done - fi - ]) - fi - - # Print a message based on how we determined the include path - - if test x"${ac_cv_c_tkh}" = x ; then - AC_MSG_ERROR(tk.h not found. Please specify its location with --with-tkinclude) - else - AC_MSG_RESULT(${ac_cv_c_tkh}) - fi - - # Convert to a native path and substitute into the output files. - - INCLUDE_DIR_NATIVE=`${CYGPATH} ${ac_cv_c_tkh}` - - TK_INCLUDES=-I\"${INCLUDE_DIR_NATIVE}\" - - AC_SUBST(TK_INCLUDES) -]) - -#------------------------------------------------------------------------ -# SC_SIMPLE_EXEEXT -# Select the executable extension based on the host type. This -# is a lightweight replacement for AC_EXEEXT that doesn't require -# a compiler. -# -# Arguments -# none -# -# Results -# Subst's the following values: -# EXEEXT -#------------------------------------------------------------------------ - -AC_DEFUN(SC_SIMPLE_EXEEXT, [ - AC_MSG_CHECKING(executable extension based on host type) - - case "`uname -s`" in - *win32* | *WIN32* | *CYGWIN_NT* |*CYGWIN_98*|*CYGWIN_95*) - EXEEXT=".exe" - ;; - *) - EXEEXT="" - ;; - esac - - AC_MSG_RESULT(${EXEEXT}) - AC_SUBST(EXEEXT) -]) - -#------------------------------------------------------------------------ -# SC_PROG_TCLSH -# Locate a tclsh shell in the following directories: -# ${exec_prefix}/bin -# ${prefix}/bin -# ${TCL_BIN_DIR} -# ${TCL_BIN_DIR}/../bin -# ${PATH} -# -# Arguments -# none -# -# Results -# Subst's the following values: -# TCLSH_PROG -#------------------------------------------------------------------------ - -AC_DEFUN(SC_PROG_TCLSH, [ - AC_MSG_CHECKING([for tclsh]) - - AC_CACHE_VAL(ac_cv_path_tclsh, [ - search_path=`echo ${exec_prefix}/bin:${prefix}/bin:${TCL_BIN_DIR}:${TCL_BIN_DIR}/../bin:${PATH} | sed -e 's/:/ /g'` - for dir in $search_path ; do - for j in `ls -r $dir/tclsh[[8-9]]*${EXEEXT} 2> /dev/null` \ - `ls -r $dir/tclsh*${EXEEXT} 2> /dev/null` ; do - if test x"$ac_cv_path_tclsh" = x ; then - if test -f "$j" ; then - ac_cv_path_tclsh=$j - break - fi - fi - done - done - ]) - - if test -f "$ac_cv_path_tclsh" ; then - TCLSH_PROG=$ac_cv_path_tclsh - AC_MSG_RESULT($TCLSH_PROG) - else - AC_MSG_ERROR(No tclsh found in PATH: $search_path) - fi - AC_SUBST(TCLSH_PROG) -]) - -#------------------------------------------------------------------------ -# SC_PROG_WISH -# Locate a wish shell in the following directories: -# ${exec_prefix}/bin -# ${prefix}/bin -# ${TCL_BIN_DIR} -# ${TCL_BIN_DIR}/../bin -# ${PATH} -# -# Arguments -# none -# -# Results -# Subst's the following values: -# WISH_PROG -#------------------------------------------------------------------------ - -AC_DEFUN(SC_PROG_WISH, [ - AC_MSG_CHECKING([for wish]) - - AC_CACHE_VAL(ac_cv_path_wish, [ - search_path=`echo ${exec_prefix}/bin:${prefix}/bin:${TCL_BIN_DIR}:${TCL_BIN_DIR}/../bin:${PATH} | sed -e 's/:/ /g'` - for dir in $search_path ; do - for j in `ls -r $dir/wish[[8-9]]*${EXEEXT} 2> /dev/null` \ - `ls -r $dir/wish*${EXEEXT} 2> /dev/null` ; do - if test x"$ac_cv_path_wish" = x ; then - if test -f "$j" ; then - ac_cv_path_wish=$j - break - fi - fi - done - done - ]) - - if test -f "$ac_cv_path_wish" ; then - WISH_PROG=$ac_cv_path_wish - AC_MSG_RESULT($WISH_PROG) - else - AC_MSG_ERROR(No wish found in PATH: $search_path) - fi - AC_SUBST(WISH_PROG) -]) - -#------------------------------------------------------------------------ -# SC_SET_PLATFORM -# Determine the common name of the platform we are using -# -# Arguments -# none -# -# Results -# Subst's the following values: -# PLATFORM -# CYGPATH -#------------------------------------------------------------------------ - -AC_DEFUN(SC_SET_PLATFORM, [ - AC_MSG_CHECKING(host platform) - - case "`uname -s`" in - *win32* | *WIN32* | *CYGWIN_NT* | *CYGWIN_98* | *CYGWIN_95*) - CYGPATH="cygpath -w" - PLATFORM=win32-ix86 - ;; - SunOS) - CYGPATH=echo - PLATFORM=solaris-sparc - ;; - Linux) - CYGPATH=echo - PLATFORM=linux-ix86 - ;; - FreeBSD) - CYGPATH=echo - PLATFORM=freebsd-ix86 - ;; - AIX) - CYGPATH=echo - PLATFORM=aix-risc - ;; - HP-UX) - CYGPATH=echo - PLATFORM=hpux-parisc - ;; - IRIX) - CYGPATH=echo - PLATFORM=irix-mips - ;; - *) - CYGPATH=echo - PLATFORM=UNSUPPORTED - ;; - esac - - if test x"${PLATFORM}" = x"UNSUPPORTED" ; then - AC_MSG_ERROR(Can't figure out what platform you are using) - else - AC_MSG_RESULT(${PLATFORM}) - fi - - AC_SUBST(PLATFORM) - AC_SUBST(CYGPATH) -]) - -#------------------------------------------------------------------------ -# SC_PATH_MODULE -# Add a --with-foodir flag for locating sources for an external module -# Search order: -# --with-foodir configure switch value -# cached configure value -# $2 argument -# ${srcdir}/modules/$1 -# ${srcdir}/../$1 -# ${srcdir}/../$1[0-9]* -# -# Arguments -# $1 Name of module to locate -# $2 Default directory where module can be found. If not specified, -# the macro looks in some well-known locations. This argument -# is mainly used for internal modules. -# -# Results -# sets MODULE_DIR_$1 to point to the top level directory of -# the module. -#------------------------------------------------------------------------ - -AC_DEFUN(SC_PATH_MODULE, [ - - if test x"${CYGPATH}" = x ; then - SC_SET_PLATFORM - fi - - modsrcdir=$1 - - AC_ARG_WITH($1dir, [ --with-$1dir directory containing sources for $1], with_module=${withval}, with_module="") - AC_MSG_CHECKING([for $1dir]) - - if test x"${with_module}" = x ; then - AC_CACHE_VAL(ac_cv_module_$1dir,[ - if test x"${with_module}" != x ; then - # Sanity check. Look for this module dir - if test -d "${with_module}" ; then - ac_cv_module_$1dir=`(cd ${with_module} ; pwd)` - fi - fi - - - # If not found, look in a few standard places for this module. - # Look in the default location (as specified by the argument(s) - # to this macro) first - - if test x"$2" != x ; then - for i in \ - `ls -dr $2 2>/dev/null` \ - `ls -dr ${srcdir}/$2 2>/dev/null` \ - `ls -dr ${srcdir}/../$2 2>/dev/null` \ - `ls -dr ${srcdir}/../$2[[0-9]]* 2>/dev/null` ; do - if test -d $i ; then - ac_cv_module_$1dir=`(cd $i; pwd)` - break - fi - done - fi - - # Make sure not to require a specific version number. - - if test x"${ac_cv_module_$1dir}" = x ; then - for i in \ - `ls -dr ${srcdir}/modules/$modsrcdir 2>/dev/null` \ - `ls -dr ${srcdir}/../$modsrcdir 2>/dev/null` \ - `ls -dr ${srcdir}/../$modsrcdir[[0-9]]* 2>/dev/null` ; do - if test -d $i ; then - ac_cv_module_$1dir=`(cd $i; pwd)` - break - fi - done - fi - - - ]) - else - if test -d "${with_module}" ; then - ac_cv_module_$1dir=`(cd ${with_module} ; pwd)` - else - AC_MSG_ERROR("Directory ${with_module} does not exist!") - fi - fi - - if test x"${ac_cv_module_$1dir}" = x ; then - AC_MSG_WARN(MISSING. Use --with-$1dir to specify location of $1 or make sure you have checked out the sources from cvs.) - MISSING_MODULE_LIST="${MISSING_MODULE_LIST} $1" - MODULE_LIST="${MODULE_LIST} $1" - else - # Strip off any trailing \ from the path - MODULE_DIR_$1=`${CYGPATH} ${ac_cv_module_$1dir} | sed -e 's%\\\\$%%'` - AC_MSG_RESULT(${MODULE_DIR_$1}) - AC_SUBST(MODULE_DIR_$1) - if test x"$1" != x"${PACKAGE}" ; then - MODULE_LIST="${MODULE_LIST} $1" - fi - fi -]) - -#------------------------------------------------------------------------ -# SC_PATH_TOOLS -# Add a --with-toolsdir flag for locating sources for an external module -# -# Arguments -# none -# -# Results -# sets MODULE_DIR_tools to point to the top level directory of -# the module. -#------------------------------------------------------------------------ - -AC_DEFUN(SC_PATH_TOOLS, [ - AC_ARG_WITH(toolsdir, [ --with-toolsdir directory containing sources for tools], with_module=${withval}, with_module="") - AC_MSG_CHECKING([for toolsdir]) - - if test x"${with_module}" = x ; then - AC_CACHE_VAL(ac_cv_module_toolsdir,[ - if test x"${with_module}" != x ; then - # Sanity check. Look for configure.in in this module dir - if test -d "${with_module}" ; then - ac_cv_module_toolsdir=`(cd ${with_module} ; pwd)` - fi - fi - - - - # If not found, look in a few standard places for this module. - # Make sure not to require a specific version number. - - if test x"${ac_cv_module_toolsdir}" = x ; then - for i in \ - `ls -dr /tools/1.[[1-5]] 2>/dev/null` \ - `ls -dr /tools/TclPro1.[[1-5]] 2>/dev/null` \ - `ls -dr //t/tools/1.[[1-5]] 2>/dev/null` \ - `ls -dr //t/tools/TclPro1.[[1-5]] 2>/dev/null` \ - `ls -dr //pop/tools/1.[[1-5]] 2>/dev/null` \ - `ls -dr //pop/tools/TclPro1.[[1-5]] 2>/dev/null` ; do - if test -d $i ; then - ac_cv_module_toolsdir=`(cd $i; pwd)` - break - fi - done - fi - - - ]) - else - if test -d "${with_module}" ; then - ac_cv_module_toolsdir=`(cd ${with_module} ; pwd)` - else - AC_MSG_WARN(Directory ${with_module} does not exist!) - fi - fi - - if test x"${ac_cv_module_toolsdir}" = x ; then - AC_MSG_WARN(No tools directory - pressing forward with bogus value.) - MODULE_DIR_tools=no_tools_dir - AC_SUBST(MODULE_DIR_tools) -# AC_MSG_ERROR("Use --with-toolsdir to specify location of tools") -# exit 1 - else - MODULE_DIR_tools=${ac_cv_module_toolsdir} - AC_MSG_RESULT(${ac_cv_module_toolsdir}) - AC_SUBST(MODULE_DIR_tools) - fi -]) - -#------------------------------------------------------------------------ -# SC_PATH_PROTOOLS -# Path to a valid Tclpro installation. You must call SC_ SET_PLATFORM -# before calling this macro. -# -# Arguments -# none -# -# Results -# Subst's the following values: -# PROTOOLSDIR -#------------------------------------------------------------------------ - -AC_DEFUN(SC_PATH_PROTOOLS, [ - if test x"${PLATFORM}" = x ; then - SC_SET_PLATFORM - fi - - AC_ARG_WITH(protools, [ --with-protools directory containing the Tclpro installation], protools_dir=${withval}) - - AC_MSG_CHECKING(for protclsh in a TclPro installation) - - if test x"${protools_dir}" != x ; then - # Look for protclsh - - for i in `ls -r ${protools_dir}/${PLATFORM}/bin/protclsh* 2>/dev/null` ; do - if test -f $i ; then - PROTCLSH=$i - break - fi - done - else - for i in `ls -dr /tools/TclPro1.[[3-4]] 2>/dev/null` \ - `ls -dr //t/tools/TclPro1.[[3-4]] 2>/dev/null ` ; do - - # Look for protclsh - - for j in `ls $i/${PLATFORM}/bin/protclsh* 2>/dev/null` ; do - if test -f $j ; then - PROTCLSH=$j - break - fi - done - - if test x"${PROTCLSH}" != x ; then - protools_dir=$i - break - fi - done - fi - - if test x"${PROTCLSH}" = x ; then - AC_MSG_WARN(Could not locate a TclPro installation containing protclsh. Use --with-protoolsdir to specify a valid TclPro installation.) - protools_dir=BOGUS_protools_dir - else - AC_MSG_RESULT("found ${PROTCLSH}") - fi - - PROTOOLSDIR=${protools_dir} - AC_SUBST(PROTOOLSDIR) -]) ADDED tclconfig/README.txt Index: tclconfig/README.txt ================================================================== --- /dev/null +++ tclconfig/README.txt @@ -0,0 +1,26 @@ +These files comprise the basic building blocks for a Tcl Extension +Architecture (TEA) extension. For more information on TEA see: + + http://www.tcl.tk/doc/tea/ + +This package is part of the Tcl project at SourceForge, and latest +sources should be available there: + + http://tcl.sourceforge.net/ + +This package is a freely available open source package. You can do +virtually anything you like with it, such as modifying it, redistributing +it, and selling it either in whole or in part. + +CONTENTS +======== +The following is a short description of the files you will find in +the sample extension. + +README.txt This file + +install-sh Program used for copying binaries and script files + to their install locations. + +tcl.m4 Collection of Tcl autoconf macros. Included by a package's + aclocal.m4 to define SC_* macros. ADDED tclconfig/install-sh Index: tclconfig/install-sh ================================================================== --- /dev/null +++ tclconfig/install-sh @@ -0,0 +1,119 @@ +#!/bin/sh + +# +# install - install a program, script, or datafile +# This comes from X11R5; it is not part of GNU. +# +# $XConsortium: install.sh,v 1.2 89/12/18 14:47:22 jim Exp $ +# +# This script is compatible with the BSD install script, but was written +# from scratch. +# + + +# set DOITPROG to echo to test this script + +# Don't use :- since 4.3BSD and earlier shells don't like it. +doit="${DOITPROG-}" + + +# put in absolute paths if you don't have them in your path; or use env. vars. + +mvprog="${MVPROG-mv}" +cpprog="${CPPROG-cp}" +chmodprog="${CHMODPROG-chmod}" +chownprog="${CHOWNPROG-chown}" +chgrpprog="${CHGRPPROG-chgrp}" +stripprog="${STRIPPROG-strip}" +rmprog="${RMPROG-rm}" + +instcmd="$mvprog" +chmodcmd="" +chowncmd="" +chgrpcmd="" +stripcmd="" +rmcmd="$rmprog -f" +mvcmd="$mvprog" +src="" +dst="" + +while [ x"$1" != x ]; do + case $1 in + -c) instcmd="$cpprog" + shift + continue;; + + -m) chmodcmd="$chmodprog $2" + shift + shift + continue;; + + -o) chowncmd="$chownprog $2" + shift + shift + continue;; + + -g) chgrpcmd="$chgrpprog $2" + shift + shift + continue;; + + -s) stripcmd="$stripprog" + shift + continue;; + + *) if [ x"$src" = x ] + then + src=$1 + else + dst=$1 + fi + shift + continue;; + esac +done + +if [ x"$src" = x ] +then + echo "install: no input file specified" + exit 1 +fi + +if [ x"$dst" = x ] +then + echo "install: no destination specified" + exit 1 +fi + + +# If destination is a directory, append the input filename; if your system +# does not like double slashes in filenames, you may need to add some logic + +if [ -d $dst ] +then + dst="$dst"/`basename $src` +fi + +# Make a temp file name in the proper directory. + +dstdir=`dirname $dst` +dsttmp=$dstdir/#inst.$$# + +# Move or copy the file name to the temp name + +$doit $instcmd $src $dsttmp + +# and set any options; do chmod last to preserve setuid bits + +if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; fi +if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; fi +if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; fi +if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; fi + +# Now rename the file to the real destination. + +$doit $rmcmd $dst +$doit $mvcmd $dsttmp $dst + + +exit 0 ADDED tclconfig/tcl.m4 Index: tclconfig/tcl.m4 ================================================================== --- /dev/null +++ tclconfig/tcl.m4 @@ -0,0 +1,3675 @@ +# tcl.m4 -- +# +# This file provides a set of autoconf macros to help TEA-enable +# a Tcl extension. +# +# Copyright (c) 1999-2000 Ajuba Solutions. +# Copyright (c) 2002-2003 ActiveState Corporation. +# +# See the file "license.terms" for information on usage and redistribution +# of this file, and for a DISCLAIMER OF ALL WARRANTIES. +# +# RCS: @(#) $Id: tcl.m4,v 1.1 2004/03/20 01:16:42 hobbs Exp $ + +AC_PREREQ(2.50) + +#------------------------------------------------------------------------ +# TEA_PATH_TCLCONFIG -- +# +# Locate the tclConfig.sh file and perform a sanity check on +# the Tcl compile flags +# +# Arguments: +# none +# +# Results: +# +# Adds the following arguments to configure: +# --with-tcl=... +# +# Defines the following vars: +# TCL_BIN_DIR Full path to the directory containing +# the tclConfig.sh file +#------------------------------------------------------------------------ + +AC_DEFUN(TEA_PATH_TCLCONFIG, [ + dnl Make sure we are initialized + AC_REQUIRE([TEA_INIT]) + # + # Ok, lets find the tcl configuration + # First, look for one uninstalled. + # the alternative search directory is invoked by --with-tcl + # + + if test x"${no_tcl}" = x ; then + # we reset no_tcl in case something fails here + no_tcl=true + AC_ARG_WITH(tcl, [ --with-tcl directory containing tcl configuration (tclConfig.sh)], with_tclconfig=${withval}) + AC_MSG_CHECKING([for Tcl configuration]) + AC_CACHE_VAL(ac_cv_c_tclconfig,[ + + # First check to see if --with-tcl was specified. + if test x"${with_tclconfig}" != x ; then + if test -f "${with_tclconfig}/tclConfig.sh" ; then + ac_cv_c_tclconfig=`(cd ${with_tclconfig}; pwd)` + else + AC_MSG_ERROR([${with_tclconfig} directory doesn't contain tclConfig.sh]) + fi + fi + + # then check for a private Tcl installation + if test x"${ac_cv_c_tclconfig}" = x ; then + for i in \ + ../tcl \ + `ls -dr ../tcl[[8-9]].[[0-9]]* 2>/dev/null` \ + ../../tcl \ + `ls -dr ../../tcl[[8-9]].[[0-9]]* 2>/dev/null` \ + ../../../tcl \ + `ls -dr ../../../tcl[[8-9]].[[0-9]]* 2>/dev/null` ; do + if test -f "$i/unix/tclConfig.sh" ; then + ac_cv_c_tclconfig=`(cd $i/unix; pwd)` + break + fi + done + fi + + # check in a few common install locations + if test x"${ac_cv_c_tclconfig}" = x ; then + for i in `ls -d ${exec_prefix}/lib 2>/dev/null` \ + `ls -d ${prefix}/lib 2>/dev/null` \ + `ls -d /usr/local/lib 2>/dev/null` \ + `ls -d /usr/contrib/lib 2>/dev/null` \ + `ls -d /usr/lib 2>/dev/null` \ + ; do + if test -f "$i/tclConfig.sh" ; then + ac_cv_c_tclconfig=`(cd $i; pwd)` + break + fi + done + fi + + # check in a few other private locations + if test x"${ac_cv_c_tclconfig}" = x ; then + for i in \ + ${srcdir}/../tcl \ + `ls -dr ${srcdir}/../tcl[[8-9]].[[0-9]]* 2>/dev/null` ; do + if test -f "$i/unix/tclConfig.sh" ; then + ac_cv_c_tclconfig=`(cd $i/unix; pwd)` + break + fi + done + fi + ]) + + if test x"${ac_cv_c_tclconfig}" = x ; then + TCL_BIN_DIR="# no Tcl configs found" + AC_MSG_WARN("Cannot find Tcl configuration definitions") + exit 0 + else + no_tcl= + TCL_BIN_DIR=${ac_cv_c_tclconfig} + AC_MSG_RESULT([found $TCL_BIN_DIR/tclConfig.sh]) + fi + fi +]) + +#------------------------------------------------------------------------ +# TEA_PATH_TKCONFIG -- +# +# Locate the tkConfig.sh file +# +# Arguments: +# none +# +# Results: +# +# Adds the following arguments to configure: +# --with-tk=... +# +# Defines the following vars: +# TK_BIN_DIR Full path to the directory containing +# the tkConfig.sh file +#------------------------------------------------------------------------ + +AC_DEFUN(TEA_PATH_TKCONFIG, [ + # + # Ok, lets find the tk configuration + # First, look for one uninstalled. + # the alternative search directory is invoked by --with-tk + # + + if test x"${no_tk}" = x ; then + # we reset no_tk in case something fails here + no_tk=true + AC_ARG_WITH(tk, [ --with-tk directory containing tk configuration (tkConfig.sh)], with_tkconfig=${withval}) + AC_MSG_CHECKING([for Tk configuration]) + AC_CACHE_VAL(ac_cv_c_tkconfig,[ + + # First check to see if --with-tkconfig was specified. + if test x"${with_tkconfig}" != x ; then + if test -f "${with_tkconfig}/tkConfig.sh" ; then + ac_cv_c_tkconfig=`(cd ${with_tkconfig}; pwd)` + else + AC_MSG_ERROR([${with_tkconfig} directory doesn't contain tkConfig.sh]) + fi + fi + + # then check for a private Tk library + if test x"${ac_cv_c_tkconfig}" = x ; then + for i in \ + ../tk \ + `ls -dr ../tk[[8-9]].[[0-9]]* 2>/dev/null` \ + ../../tk \ + `ls -dr ../../tk[[8-9]].[[0-9]]* 2>/dev/null` \ + ../../../tk \ + `ls -dr ../../../tk[[8-9]].[[0-9]]* 2>/dev/null` ; do + if test -f "$i/unix/tkConfig.sh" ; then + ac_cv_c_tkconfig=`(cd $i/unix; pwd)` + break + fi + done + fi + # check in a few common install locations + if test x"${ac_cv_c_tkconfig}" = x ; then + for i in `ls -d ${exec_prefix}/lib 2>/dev/null` \ + `ls -d ${prefix}/lib 2>/dev/null` \ + `ls -d /usr/local/lib 2>/dev/null` \ + `ls -d /usr/contrib/lib 2>/dev/null` \ + `ls -d /usr/lib 2>/dev/null` \ + ; do + if test -f "$i/tkConfig.sh" ; then + ac_cv_c_tkconfig=`(cd $i; pwd)` + break + fi + done + fi + # check in a few other private locations + if test x"${ac_cv_c_tkconfig}" = x ; then + for i in \ + ${srcdir}/../tk \ + `ls -dr ${srcdir}/../tk[[8-9]].[[0-9]]* 2>/dev/null` ; do + if test -f "$i/unix/tkConfig.sh" ; then + ac_cv_c_tkconfig=`(cd $i/unix; pwd)` + break + fi + done + fi + ]) + if test x"${ac_cv_c_tkconfig}" = x ; then + TK_BIN_DIR="# no Tk configs found" + AC_MSG_WARN("Cannot find Tk configuration definitions") + exit 0 + else + no_tk= + TK_BIN_DIR=${ac_cv_c_tkconfig} + AC_MSG_RESULT([found $TK_BIN_DIR/tkConfig.sh]) + fi + fi + +]) + +#------------------------------------------------------------------------ +# TEA_LOAD_TCLCONFIG -- +# +# Load the tclConfig.sh file +# +# Arguments: +# +# Requires the following vars to be set: +# TCL_BIN_DIR +# +# Results: +# +# Subst the following vars: +# TCL_BIN_DIR +# TCL_SRC_DIR +# TCL_LIB_FILE +# +#------------------------------------------------------------------------ + +AC_DEFUN(TEA_LOAD_TCLCONFIG, [ + AC_MSG_CHECKING([for existence of $TCL_BIN_DIR/tclConfig.sh]) + + if test -f "$TCL_BIN_DIR/tclConfig.sh" ; then + AC_MSG_RESULT([loading]) + . $TCL_BIN_DIR/tclConfig.sh + else + AC_MSG_RESULT([file not found]) + fi + + # + # If the TCL_BIN_DIR is the build directory (not the install directory), + # then set the common variable name to the value of the build variables. + # For example, the variable TCL_LIB_SPEC will be set to the value + # of TCL_BUILD_LIB_SPEC. An extension should make use of TCL_LIB_SPEC + # instead of TCL_BUILD_LIB_SPEC since it will work with both an + # installed and uninstalled version of Tcl. + # + + if test -f $TCL_BIN_DIR/Makefile ; then + TCL_LIB_SPEC=${TCL_BUILD_LIB_SPEC} + TCL_STUB_LIB_SPEC=${TCL_BUILD_STUB_LIB_SPEC} + TCL_STUB_LIB_PATH=${TCL_BUILD_STUB_LIB_PATH} + fi + + # + # eval is required to do the TCL_DBGX substitution + # + + eval "TCL_LIB_FILE=\"${TCL_LIB_FILE}\"" + eval "TCL_LIB_FLAG=\"${TCL_LIB_FLAG}\"" + eval "TCL_LIB_SPEC=\"${TCL_LIB_SPEC}\"" + + eval "TCL_STUB_LIB_FILE=\"${TCL_STUB_LIB_FILE}\"" + eval "TCL_STUB_LIB_FLAG=\"${TCL_STUB_LIB_FLAG}\"" + eval "TCL_STUB_LIB_SPEC=\"${TCL_STUB_LIB_SPEC}\"" + + AC_SUBST(TCL_VERSION) + AC_SUBST(TCL_BIN_DIR) + AC_SUBST(TCL_SRC_DIR) + + AC_SUBST(TCL_LIB_FILE) + AC_SUBST(TCL_LIB_FLAG) + AC_SUBST(TCL_LIB_SPEC) + + AC_SUBST(TCL_STUB_LIB_FILE) + AC_SUBST(TCL_STUB_LIB_FLAG) + AC_SUBST(TCL_STUB_LIB_SPEC) + + #AC_SUBST(TCL_DBGX) + AC_SUBST(TCL_LIBS) + AC_SUBST(TCL_DEFS) + AC_SUBST(TCL_EXTRA_CFLAGS) + AC_SUBST(TCL_LD_FLAGS) + AC_SUBST(TCL_SHLIB_LD_LIBS) + #AC_SUBST(TCL_BUILD_LIB_SPEC) + #AC_SUBST(TCL_BUILD_STUB_LIB_SPEC) +]) + +#------------------------------------------------------------------------ +# TEA_LOAD_TKCONFIG -- +# +# Load the tkConfig.sh file +# +# Arguments: +# +# Requires the following vars to be set: +# TK_BIN_DIR +# +# Results: +# +# Sets the following vars that should be in tkConfig.sh: +# TK_BIN_DIR +#------------------------------------------------------------------------ + +AC_DEFUN(TEA_LOAD_TKCONFIG, [ + AC_MSG_CHECKING([for existence of ${TK_BIN_DIR}/tkConfig.sh]) + + if test -f "${TK_BIN_DIR}/tkConfig.sh" ; then + AC_MSG_RESULT([loading]) + . $TK_BIN_DIR/tkConfig.sh + else + AC_MSG_RESULT([could not find ${TK_BIN_DIR}/tkConfig.sh]) + fi + + # + # If the TK_BIN_DIR is the build directory (not the install directory), + # then set the common variable name to the value of the build variables. + # For example, the variable TK_LIB_SPEC will be set to the value + # of TK_BUILD_LIB_SPEC. An extension should make use of TK_LIB_SPEC + # instead of TK_BUILD_LIB_SPEC since it will work with both an + # installed and uninstalled version of Tcl. + # + + if test -f $TK_BIN_DIR/Makefile ; then + TK_LIB_SPEC=${TK_BUILD_LIB_SPEC} + TK_STUB_LIB_SPEC=${TK_BUILD_STUB_LIB_SPEC} + TK_STUB_LIB_PATH=${TK_BUILD_STUB_LIB_PATH} + fi + + # + # eval is required to do the TK_DBGX substitution + # + + eval "TK_LIB_FILE=\"${TK_LIB_FILE}\"" + eval "TK_LIB_FLAG=\"${TK_LIB_FLAG}\"" + eval "TK_LIB_SPEC=\"${TK_LIB_SPEC}\"" + + eval "TK_STUB_LIB_FILE=\"${TK_STUB_LIB_FILE}\"" + eval "TK_STUB_LIB_FLAG=\"${TK_STUB_LIB_FLAG}\"" + eval "TK_STUB_LIB_SPEC=\"${TK_STUB_LIB_SPEC}\"" + + AC_SUBST(TK_VERSION) + AC_SUBST(TK_BIN_DIR) + AC_SUBST(TK_SRC_DIR) + + AC_SUBST(TK_LIB_FILE) + AC_SUBST(TK_LIB_FLAG) + AC_SUBST(TK_LIB_SPEC) + + AC_SUBST(TK_STUB_LIB_FILE) + AC_SUBST(TK_STUB_LIB_FLAG) + AC_SUBST(TK_STUB_LIB_SPEC) + + AC_SUBST(TK_LIBS) + AC_SUBST(TK_XINCLUDES) +]) + +#------------------------------------------------------------------------ +# TEA_ENABLE_SHARED -- +# +# Allows the building of shared libraries +# +# Arguments: +# none +# +# Results: +# +# Adds the following arguments to configure: +# --enable-shared=yes|no +# +# Defines the following vars: +# STATIC_BUILD Used for building import/export libraries +# on Windows. +# +# Sets the following vars: +# SHARED_BUILD Value of 1 or 0 +#------------------------------------------------------------------------ + +AC_DEFUN(TEA_ENABLE_SHARED, [ + AC_MSG_CHECKING([how to build libraries]) + AC_ARG_ENABLE(shared, + [ --enable-shared build and link with shared libraries [--enable-shared]], + [tcl_ok=$enableval], [tcl_ok=yes]) + + if test "${enable_shared+set}" = set; then + enableval="$enable_shared" + tcl_ok=$enableval + else + tcl_ok=yes + fi + + if test "$tcl_ok" = "yes" ; then + AC_MSG_RESULT([shared]) + SHARED_BUILD=1 + else + AC_MSG_RESULT([static]) + SHARED_BUILD=0 + AC_DEFINE(STATIC_BUILD) + fi + AC_SUBST(SHARED_BUILD) +]) + +#------------------------------------------------------------------------ +# TEA_ENABLE_THREADS -- +# +# Specify if thread support should be enabled. If "yes" is +# specified as an arg (optional), threads are enabled by default. +# +# Arguments: +# none +# +# Results: +# +# Adds the following arguments to configure: +# --enable-threads +# +# Sets the following vars: +# THREADS_LIBS Thread library(s) +# +# Defines the following vars: +# TCL_THREADS +# _REENTRANT +# +#------------------------------------------------------------------------ + +AC_DEFUN(TEA_ENABLE_THREADS, [ + AC_ARG_ENABLE(threads, [ --enable-threads build with threads], + [tcl_ok=$enableval], [tcl_ok=$1]) + + if test "$tcl_ok" = "yes"; then + TCL_THREADS=1 + + if test "${TEA_PLATFORM}" != "windows" ; then + # We are always OK on Windows, so check what this platform wants. + AC_DEFINE(USE_THREAD_ALLOC) + AC_DEFINE(_REENTRANT) + AC_DEFINE(_THREAD_SAFE) + AC_CHECK_LIB(pthread,pthread_mutex_init,tcl_ok=yes,tcl_ok=no) + if test "$tcl_ok" = "no"; then + # Check a little harder for __pthread_mutex_init in the + # same library, as some systems hide it there until + # pthread.h is defined. We could alternatively do an + # AC_TRY_COMPILE with pthread.h, but that will work with + # libpthread really doesn't exist, like AIX 4.2. + # [Bug: 4359] + AC_CHECK_LIB(pthread, __pthread_mutex_init, + tcl_ok=yes, tcl_ok=no) + fi + + if test "$tcl_ok" = "yes"; then + # The space is needed + THREADS_LIBS=" -lpthread" + else + AC_CHECK_LIB(pthreads, pthread_mutex_init, + tcl_ok=yes, tcl_ok=no) + if test "$tcl_ok" = "yes"; then + # The space is needed + THREADS_LIBS=" -lpthreads" + else + AC_CHECK_LIB(c, pthread_mutex_init, + tcl_ok=yes, tcl_ok=no) + if test "$tcl_ok" = "no"; then + AC_CHECK_LIB(c_r, pthread_mutex_init, + tcl_ok=yes, tcl_ok=no) + if test "$tcl_ok" = "yes"; then + # The space is needed + THREADS_LIBS=" -pthread" + else + TCL_THREADS=0 + AC_MSG_WARN("Don t know how to find pthread lib on your system - thread support disabled") + fi + fi + fi + fi + + # Does the pthread-implementation provide + # 'pthread_attr_setstacksize' ? + + ac_saved_libs=$LIBS + LIBS="$LIBS $THREADS_LIBS" + AC_CHECK_FUNCS(pthread_attr_setstacksize) + LIBS=$ac_saved_libs + AC_CHECK_FUNCS(readdir_r) + fi + else + TCL_THREADS=0 + fi + # Do checking message here to not mess up interleaved configure output + AC_MSG_CHECKING([for building with threads]) + if test "${TCL_THREADS}" = "1"; then + AC_DEFINE(TCL_THREADS) + AC_MSG_RESULT([yes]) + else + AC_MSG_RESULT([no (default)]) + fi + # TCL_THREADS sanity checking. See if our request for building with + # threads is the same as the way Tcl was built. If not, warn the user. + case ${TCL_DEFS} in + *THREADS=1*) + if test "${TCL_THREADS}" = "0"; then + AC_MSG_WARN([ + Building ${PACKAGE_NAME} without threads enabled, but building against a Tcl + that IS thread-enabled.]) + fi + ;; + *) + if test "${TCL_THREADS}" = "1"; then + AC_MSG_WARN([ + --enable-threads requested, but attempting building against a Tcl + that is NOT thread-enabled.]) + fi + ;; + esac + AC_SUBST(TCL_THREADS) +]) + +#------------------------------------------------------------------------ +# TEA_ENABLE_SYMBOLS -- +# +# Specify if debugging symbols should be used +# Memory (TCL_MEM_DEBUG) debugging can also be enabled. +# +# Arguments: +# none +# +# Requires the following vars to be set: +# CFLAGS_DEBUG +# CFLAGS_OPTIMIZE +# LDFLAGS_DEBUG +# LDFLAGS_OPTIMIZE +# +# Results: +# +# Adds the following arguments to configure: +# --enable-symbols +# +# Defines the following vars: +# CFLAGS_DEFAULT Sets to CFLAGS_DEBUG if true +# Sets to CFLAGS_OPTIMIZE if false +# LDFLAGS_DEFAULT Sets to LDFLAGS_DEBUG if true +# Sets to LDFLAGS_OPTIMIZE if false +# DBGX Debug library extension +# +#------------------------------------------------------------------------ + +AC_DEFUN(TEA_ENABLE_SYMBOLS, [ + dnl Make sure we are initialized + AC_REQUIRE([TEA_CONFIG_CFLAGS]) + + if test "${TEA_PLATFORM}" = "windows" ; then + tcl_dbgx=d + else + tcl_dbgx=g + fi + + AC_MSG_CHECKING([for build with symbols]) + AC_ARG_ENABLE(symbols, [ --enable-symbols build with debugging symbols [--disable-symbols]], [tcl_ok=$enableval], [tcl_ok=no]) + if test "$tcl_ok" = "no"; then + CFLAGS_DEFAULT="${CFLAGS_OPTIMIZE}" + LDFLAGS_DEFAULT="${LDFLAGS_OPTIMIZE}" + DBGX="" + TCL_DBGX="" + AC_MSG_RESULT([no]) + else + CFLAGS_DEFAULT="${CFLAGS_DEBUG}" + LDFLAGS_DEFAULT="${LDFLAGS_DEBUG}" + DBGX=${tcl_dbgx} + TCL_DBGX=${tcl_dbgx} + if test "$tcl_ok" = "yes"; then + AC_MSG_RESULT([yes (standard debugging)]) + fi + fi + if test "${TEA_PLATFORM}" != "windows" ; then + LDFLAGS_DEFAULT="${LDFLAGS}" + fi + + AC_SUBST(TCL_DBGX) + AC_SUBST(CFLAGS_DEFAULT) + AC_SUBST(LDFLAGS_DEFAULT) + + if test "$tcl_ok" = "mem" -o "$tcl_ok" = "all"; then + AC_DEFINE(TCL_MEM_DEBUG) + fi + + if test "$tcl_ok" != "yes" -a "$tcl_ok" != "no"; then + if test "$tcl_ok" = "all"; then + AC_MSG_RESULT([enabled symbols mem debugging]) + else + AC_MSG_RESULT([enabled $tcl_ok debugging]) + fi + fi +]) + +#------------------------------------------------------------------------ +# TEA_ENABLE_LANGINFO -- +# +# Allows use of modern nl_langinfo check for better l10n. +# This is only relevant for Unix. +# +# Arguments: +# none +# +# Results: +# +# Adds the following arguments to configure: +# --enable-langinfo=yes|no (default is yes) +# +# Defines the following vars: +# HAVE_LANGINFO Triggers use of nl_langinfo if defined. +# +#------------------------------------------------------------------------ + +AC_DEFUN(TEA_ENABLE_LANGINFO, [ + AC_ARG_ENABLE(langinfo, + [ --enable-langinfo use nl_langinfo if possible to determine + encoding at startup, otherwise use old heuristic], + [langinfo_ok=$enableval], [langinfo_ok=yes]) + + HAVE_LANGINFO=0 + if test "$langinfo_ok" = "yes"; then + if test "$langinfo_ok" = "yes"; then + AC_CHECK_HEADER(langinfo.h,[langinfo_ok=yes],[langinfo_ok=no]) + fi + fi + AC_MSG_CHECKING([whether to use nl_langinfo]) + if test "$langinfo_ok" = "yes"; then + AC_TRY_COMPILE([#include ], + [nl_langinfo(CODESET);],[langinfo_ok=yes],[langinfo_ok=no]) + if test "$langinfo_ok" = "no"; then + langinfo_ok="no (could not compile with nl_langinfo)"; + fi + if test "$langinfo_ok" = "yes"; then + AC_DEFINE(HAVE_LANGINFO) + fi + fi + AC_MSG_RESULT([$langinfo_ok]) +]) + +#-------------------------------------------------------------------- +# TEA_CONFIG_CFLAGS +# +# Try to determine the proper flags to pass to the compiler +# for building shared libraries and other such nonsense. +# +# Arguments: +# none +# +# Results: +# +# Defines the following vars: +# +# DL_OBJS - Name of the object file that implements dynamic +# loading for Tcl on this system. +# DL_LIBS - Library file(s) to include in tclsh and other base +# applications in order for the "load" command to work. +# LDFLAGS - Flags to pass to the compiler when linking object +# files into an executable application binary such +# as tclsh. +# LD_SEARCH_FLAGS-Flags to pass to ld, such as "-R /usr/local/tcl/lib", +# that tell the run-time dynamic linker where to look +# for shared libraries such as libtcl.so. Depends on +# the variable LIB_RUNTIME_DIR in the Makefile. +# SHLIB_CFLAGS - Flags to pass to cc when compiling the components +# of a shared library (may request position-independent +# code, among other things). +# SHLIB_LD - Base command to use for combining object files +# into a shared library. +# SHLIB_LD_LIBS - Dependent libraries for the linker to scan when +# creating shared libraries. This symbol typically +# goes at the end of the "ld" commands that build +# shared libraries. The value of the symbol is +# "${LIBS}" if all of the dependent libraries should +# be specified when creating a shared library. If +# dependent libraries should not be specified (as on +# SunOS 4.x, where they cause the link to fail, or in +# general if Tcl and Tk aren't themselves shared +# libraries), then this symbol has an empty string +# as its value. +# SHLIB_SUFFIX - Suffix to use for the names of dynamically loadable +# extensions. An empty string means we don't know how +# to use shared libraries on this platform. +# TCL_LIB_FILE - Name of the file that contains the Tcl library, such +# as libtcl7.8.so or libtcl7.8.a. +# TCL_LIB_SUFFIX -Specifies everything that comes after the "libtcl" +# in the shared library name, using the +# ${PACKAGE_VERSION} variable to put the version in +# the right place. This is used by platforms that +# need non-standard library names. +# Examples: ${PACKAGE_VERSION}.so.1.1 on NetBSD, +# since it needs to have a version after the .so, and +# ${PACKAGE_VERSION}.a on AIX, since the Tcl shared +# library needs to have a .a extension whereas shared +# objects for loadable extensions have a .so +# extension. Defaults to +# ${PACKAGE_VERSION}${SHLIB_SUFFIX}. +# TCL_NEEDS_EXP_FILE - +# 1 means that an export file is needed to link to a +# shared library. +# TCL_EXP_FILE - The name of the installed export / import file which +# should be used to link to the Tcl shared library. +# Empty if Tcl is unshared. +# TCL_BUILD_EXP_FILE - +# The name of the built export / import file which +# should be used to link to the Tcl shared library. +# Empty if Tcl is unshared. +# CFLAGS_DEBUG - +# Flags used when running the compiler in debug mode +# CFLAGS_OPTIMIZE - +# Flags used when running the compiler in optimize mode +# EXTRA_CFLAGS - +# Extra CFLAGS to pass to the compiler +# +# Subst's the following vars: +# DL_LIBS +# CFLAGS_DEBUG +# CFLAGS_OPTIMIZE +# CFLAGS_WARNING +# +# STLIB_LD +# SHLIB_LD +# SHLIB_CFLAGS +# SHLIB_LD_FLAGS +# LDFLAGS_DEBUG +# LDFLAGS_OPTIMIZE +#-------------------------------------------------------------------- + +AC_DEFUN(TEA_CONFIG_CFLAGS, [ + dnl Make sure we are initialized + AC_REQUIRE([TEA_INIT]) + + # Step 0: Enable 64 bit support? + + AC_MSG_CHECKING([if 64bit support is enabled]) + AC_ARG_ENABLE(64bit,[ --enable-64bit enable 64bit support (where applicable)], [do64bit=$enableval], [do64bit=no]) + AC_MSG_RESULT([$do64bit]) + + # Step 0.b: Enable Solaris 64 bit VIS support? + + AC_MSG_CHECKING([if 64bit Sparc VIS support is requested]) + AC_ARG_ENABLE(64bit-vis,[ --enable-64bit-vis enable 64bit Sparc VIS support], [do64bitVIS=$enableval], [do64bitVIS=no]) + AC_MSG_RESULT([$do64bitVIS]) + + if test "$do64bitVIS" = "yes"; then + # Force 64bit on with VIS + do64bit=yes + fi + + # Step 0.c: Cross-compiling options for Windows/CE builds? + + if test "${TEA_PLATFORM}" = "windows" ; then + AC_MSG_CHECKING([if Windows/CE build is requested]) + AC_ARG_ENABLE(wince,[ --enable-wince enable Win/CE support (where applicable)], [doWince=$enableval], [doWince=no]) + AC_MSG_RESULT($doWince) + fi + + # Step 1: set the variable "system" to hold the name and version number + # for the system. This can usually be done via the "uname" command, but + # there are a few systems, like Next, where this doesn't work. + + AC_MSG_CHECKING([system version (for dynamic loading)]) + if test -f /usr/lib/NextStep/software_version; then + system=NEXTSTEP-`awk '/3/,/3/' /usr/lib/NextStep/software_version` + else + system=`uname -s`-`uname -r` + if test "$?" -ne 0 ; then + AC_MSG_RESULT([unknown (can't find uname command)]) + system=unknown + else + # Special check for weird MP-RAS system (uname returns weird + # results, and the version is kept in special file). + + if test -r /etc/.relid -a "X`uname -n`" = "X`uname -s`" ; then + system=MP-RAS-`awk '{print $3}' /etc/.relid'` + fi + if test "`uname -s`" = "AIX" ; then + system=AIX-`uname -v`.`uname -r` + fi + if test "${TEA_PLATFORM}" = "windows" ; then + system=windows + fi + AC_MSG_RESULT([$system]) + fi + fi + + # Step 2: check for existence of -ldl library. This is needed because + # Linux can use either -ldl or -ldld for dynamic loading. + + AC_CHECK_LIB(dl, dlopen, have_dl=yes, have_dl=no) + + # Step 3: set configuration options based on system name and version. + + do64bit_ok=no + EXTRA_CFLAGS="" + TCL_EXPORT_FILE_SUFFIX="" + UNSHARED_LIB_SUFFIX="" + TCL_TRIM_DOTS='`echo ${PACKAGE_VERSION} | tr -d .`' + ECHO_VERSION='`echo ${PACKAGE_VERSION}`' + TCL_LIB_VERSIONS_OK=ok + CFLAGS_DEBUG=-g + CFLAGS_OPTIMIZE=-O + if test "$GCC" = "yes" ; then + CFLAGS_WARNING="-Wall -Wconversion -Wno-implicit-int" + else + CFLAGS_WARNING="" + fi + TCL_NEEDS_EXP_FILE=0 + TCL_BUILD_EXP_FILE="" + TCL_EXP_FILE="" +dnl FIXME: Replace AC_CHECK_PROG with AC_CHECK_TOOL once cross compiling is fixed. +dnl AC_CHECK_TOOL(AR, ar, :) + AC_CHECK_PROG(AR, ar, ar) + STLIB_LD='${AR} cr' + LD_LIBRARY_PATH_VAR="LD_LIBRARY_PATH" + case $system in + windows) + # This is a 2-stage check to make sure we have the 64-bit SDK + # We have to know where the SDK is installed. + if test "$do64bit" = "yes" ; then + if test "x${MSSDK}x" = "xx" ; then + MSSDK="C:/Progra~1/Microsoft SDK" + fi + # In order to work in the tortured autoconf environment, + # we need to ensure that this path has no spaces + MSSDK=`cygpath -w -s "$MSSDK" | sed -e 's!\\\!/!g'` + if test ! -d "${MSSDK}/bin/win64" ; then + AC_MSG_WARN("could not find 64-bit SDK to enable 64bit mode") + do64bit="no" + else + do64bit_ok="yes" + fi + fi + + if test "$doWince" != "no" ; then + if test "$do64bit" = "yes" ; then + AC_MSG_ERROR([Windows/CE and 64-bit builds incompatible]) + fi + if test "$GCC" = "yes" ; then + AC_MSG_ERROR([Windows/CE and GCC builds incompatible]) + fi + TEA_PATH_CELIB + # set defaults + # Currently Tcl requires 300+ + CEVERSION=300; # could be 211 300 301 ... + TARGETCPU=ARM; # could be ARM MIPS SH3 X86 ... + PLATFORM="Pocket PC 2002" + if test "$doWince" = "yes"; then + doWince="300,ARM,ARM,Pocket PC 2002" + fi + eval `echo $doWince | awk -F "," '{ \ + if (length([$]1)) { printf "CEVERSION=%s\n", [$]1 }; \ + if (length([$]2)) { printf "TARGETCPU=%s\n", toupper([$]2) }; \ + if (length([$]3)) { printf "ARCH=%s\n", toupper([$]3) }; \ + if (length([$]4)) { printf "PLATFORM=%s\n", [$]4 }; \ + }'` + OSVERSION=WCE$CEVERSION; + if test "x${ARCH}" = "x" ; then + ARCH=$TARGETCPU; # could be ARM MIPS SH3 X86 X86EM ... + fi + if test "x${WCEROOT}" = "x" ; then + WCEROOT="C:/Program Files/Microsoft eMbedded Tools" + fi + if test "x${SDKROOT}" = "x" ; then + SDKROOT="C:/Windows CE Tools" + fi + # In order to work in the tortured autoconf environment, + # we need to ensure that this path has no spaces + WCEROOT=`cygpath -w -s "$WCEROOT" | sed -e 's!\\\!/!g'` + SDKROOT=`cygpath -w -s "$SDKROOT" | sed -e 's!\\\!/!g'` + CELIB_DIR=`cygpath -w -s "$CELIB_DIR" | sed -e 's!\\\!/!g'` + if test ! -d "${SDKROOT}/${OSVERSION}/${PLATFORM}/Lib/${TARGETCPU}" \ + -o ! -d "${WCEROOT}/EVC/${OSVERSION}/bin"; then + AC_MSG_ERROR([could not find PocketPC SDK or target compiler to enable WinCE mode [$CEVERSION,$TARGETCPU,$ARCH,$PLATFORM]]) + doWince="no" + else + CEINCLUDE=`cygpath -w -s "${SDKROOT}/${OSVERSION}/${PLATFORM}/include" | sed -e 's!\\\!/!g'` + CELIBPATH=`cygpath -w -s "${SDKROOT}/${OSVERSION}/${PLATFORM}/Lib/${TARGETCPU}" | sed -e 's!\\\!/!g'` + fi + fi + + if test "$GCC" != "yes" ; then + if test "${SHARED_BUILD}" = "0" ; then + runtime=-MT + else + runtime=-MD + fi + + if test "$do64bit" = "yes" ; then + # All this magic is necessary for the Win64 SDK RC1 - hobbs + export CC="${MSSDK}/Bin/Win64/cl.exe \ + -I${MSSDK}/Include/prerelease \ + -I${MSSDK}/Include/Win64/crt \ + -I${MSSDK}/Include" + export RC="${MSSDK}/bin/rc.exe" + export lflags="-MACHINE:IA64 -LIBPATH:${MSSDK}/Lib/IA64 \ + -LIBPATH:${MSSDK}/Lib/Prerelease/IA64" + export STLIB_LD="${MSSDK}/bin/win64/lib.exe -nologo ${lflags}" + export LINKBIN="${MSSDK}/bin/win64/link.exe ${lflags}" + CFLAGS_DEBUG="-nologo -Zi -Od -W3 ${runtime}d" + CFLAGS_OPTIMIZE="-nologo -O2 -Gs -W2 ${runtime}" + elif test "$doWince" != "no" ; then + if test "${TARGETCPU}" = "X86"; then + CC="${WCEROOT}/EVC/${OSVERSION}/bin/cl.exe -I\"${CELIB_DIR}/inc\" -I\"${CEINCLUDE}\"" + else + CC="${WCEROOT}/EVC/${OSVERSION}/bin/cl${TARGETCPU}.exe -I\"${CELIB_DIR}/inc\" -I\"${CEINCLUDE}\"" + fi + RC="${WCEROOT}/Common/EVC/bin/rc.exe" + cpulower=`echo ${TARGETCPU} | awk '{print tolower([$]0)}'` + defs="${TARGETCPU} _${TARGETCPU}_ ${cpulower} _${cpulower}_ POCKET_SIZE PALM_SIZE _MT _DLL _WINDOWS" + for i in $defs ; do + AC_DEFINE_UNQUOTED($i) + done + AC_DEFINE_UNQUOTED(_WIN32_WCE, $CEVERSION) + AC_DEFINE_UNQUOTED(UNDER_CE, $CEVERSION) + CFLAGS_DEBUG="-nologo -Zi -Od" + CFLAGS_OPTIMIZE="-nologo -Ox" + lflags="-MACHINE:${TARGETCPU} -LIBPATH:\"${CELIBPATH}\" -subsystem:windowsce,3.00" + STLIB_LD="${WCEROOT}/EVC/${OSVERSION}/bin/lib.exe -nologo ${lflags}" + LINKBIN="${WCEROOT}/EVC/${OSVERSION}/bin/link.exe ${lflags}" + else + RC="rc" + STLIB_LD="lib -nologo" + LINKBIN="link -link50compat" + CFLAGS_DEBUG="-nologo -Z7 -Od -W3 -WX ${runtime}d" + CFLAGS_OPTIMIZE="-nologo -O2 -Gs -GD -W2 ${runtime}" + fi + fi + + if test "$GCC" = "yes"; then + # mingw gcc mode + RC="windres" + CFLAGS_DEBUG="-g" + CFLAGS_OPTIMIZE="-O2" + SHLIB_LD="$CC -shared" + UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}\$\{DBGX\}.a' + LDFLAGS_CONSOLE="-wl,--subsystem,console ${lflags}" + LDFLAGS_WINDOW="-wl,--subsystem,windows ${lflags}" + else + SHLIB_LD="${LINKBIN} -dll -nologo" + UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}\$\{DBGX\}.lib' + EXTRA_CFLAGS="-YX" + PATHTYPE=-w + # For information on what debugtype is most useful, see: + # http://msdn.microsoft.com/library/en-us/dnvc60/html/gendepdebug.asp + # This essentially turns it all on. + LDFLAGS_DEBUG="-debug:full -debugtype:both -warn:2" + LDFLAGS_OPTIMIZE="-release" + if test "$doWince" != "no" ; then + LDFLAGS_CONSOLE="-link ${lflags}" + LDFLAGS_WINDOW=${LDFLAGS_CONSOLE} + else + LDFLAGS_CONSOLE="-link -subsystem:console ${lflags}" + LDFLAGS_WINDOW="-link -subsystem:windows ${lflags}" + fi + fi + + SHLIB_LD_LIBS='${LIBS}' + SHLIB_SUFFIX=".dll" + SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}\$\{DBGX\}.dll' + + TCL_LIB_VERSIONS_OK=nodots + # Bogus to avoid getting this turned off + DL_OBJS="tclLoadNone.obj" + ;; + AIX-*) + if test "${TCL_THREADS}" = "1" -a "$GCC" != "yes" ; then + # AIX requires the _r compiler when gcc isn't being used + if test "${CC}" != "cc_r" ; then + CC=${CC}_r + fi + AC_MSG_RESULT([Using $CC for compiling with threads]) + fi + LIBS="$LIBS -lc" + SHLIB_CFLAGS="" + SHLIB_SUFFIX=".so" + SHLIB_LD_LIBS='${LIBS}' + + DL_OBJS="tclLoadDl.o" + LDFLAGS="" + LD_LIBRARY_PATH_VAR="LIBPATH" + + # AIX v<=4.1 has some different flags than 4.2+ + if test "$system" = "AIX-4.1" -o "`uname -v`" -lt "4" ; then + #LIBOBJS="$LIBOBJS tclLoadAix.o" + AC_LIBOBJ([tclLoadAix]) + DL_LIBS="-lld" + fi + + # Check to enable 64-bit flags for compiler/linker on AIX 4+ + if test "$do64bit" = "yes" -a "`uname -v`" -gt "3" ; then + if test "$GCC" = "yes" ; then + AC_MSG_WARN("64bit mode not supported with GCC on $system") + else + do64bit_ok=yes + EXTRA_CFLAGS="-q64" + LDFLAGS="-q64" + RANLIB="${RANLIB} -X64" + AR="${AR} -X64" + SHLIB_LD_FLAGS="-b64" + fi + fi + + if test "`uname -m`" = "ia64" ; then + # AIX-5 uses ELF style dynamic libraries on IA-64, but not PPC + SHLIB_LD="/usr/ccs/bin/ld -G -z text" + # AIX-5 has dl* in libc.so + DL_LIBS="" + if test "$GCC" = "yes" ; then + LD_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}' + else + LD_SEARCH_FLAGS='-R${LIB_RUNTIME_DIR}' + fi + else + SHLIB_LD="${TCL_SRC_DIR}/unix/ldAix /bin/ld -bhalt:4 -bM:SRE -bE:lib.exp -H512 -T512 -bnoentry ${SHLIB_LD_FLAGS}" + DL_LIBS="-ldl" + LD_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}' + TCL_NEEDS_EXP_FILE=1 + TCL_EXPORT_FILE_SUFFIX='${PACKAGE_VERSION}\$\{DBGX\}.exp' + fi + + # On AIX <=v4 systems, libbsd.a has to be linked in to support + # non-blocking file IO. This library has to be linked in after + # the MATH_LIBS or it breaks the pow() function. The way to + # insure proper sequencing, is to add it to the tail of MATH_LIBS. + # This library also supplies gettimeofday. + # + # AIX does not have a timezone field in struct tm. When the AIX + # bsd library is used, the timezone global and the gettimeofday + # methods are to be avoided for timezone deduction instead, we + # deduce the timezone by comparing the localtime result on a + # known GMT value. + + AC_CHECK_LIB(bsd, gettimeofday, libbsd=yes, libbsd=no) + if test $libbsd = yes; then + MATH_LIBS="$MATH_LIBS -lbsd" + AC_DEFINE(USE_DELTA_FOR_TZ) + fi + ;; + BSD/OS-2.1*|BSD/OS-3*) + SHLIB_CFLAGS="" + SHLIB_LD="shlicc -r" + SHLIB_LD_LIBS='${LIBS}' + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="-ldl" + LDFLAGS="" + LD_SEARCH_FLAGS="" + ;; + BSD/OS-4.*) + SHLIB_CFLAGS="-export-dynamic -fPIC" + SHLIB_LD="cc -shared" + SHLIB_LD_LIBS='${LIBS}' + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="-ldl" + LDFLAGS="-export-dynamic" + LD_SEARCH_FLAGS="" + ;; + dgux*) + SHLIB_CFLAGS="-K PIC" + SHLIB_LD="cc -G" + SHLIB_LD_LIBS="" + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="-ldl" + LDFLAGS="" + LD_SEARCH_FLAGS="" + ;; + HP-UX-*.11.*) + # Use updated header definitions where possible + AC_DEFINE(_XOPEN_SOURCE_EXTENDED) + + SHLIB_SUFFIX=".sl" + AC_CHECK_LIB(dld, shl_load, tcl_ok=yes, tcl_ok=no) + if test "$tcl_ok" = yes; then + SHLIB_CFLAGS="+z" + SHLIB_LD="ld -b" + SHLIB_LD_LIBS='${LIBS}' + DL_OBJS="tclLoadShl.o" + DL_LIBS="-ldld" + LDFLAGS="-Wl,-E" + LD_SEARCH_FLAGS='-Wl,+s,+b,${LIB_RUNTIME_DIR}:.' + fi + LD_LIBRARY_PATH_VAR="SHLIB_PATH" + + # Users may want PA-RISC 1.1/2.0 portable code - needs HP cc + #EXTRA_CFLAGS="+DAportable" + + # Check to enable 64-bit flags for compiler/linker + if test "$do64bit" = "yes" ; then + if test "$GCC" = "yes" ; then + hpux_arch=`${CC} -dumpmachine` + case $hpux_arch in + hppa64*) + # 64-bit gcc in use. Fix flags for GNU ld. + do64bit_ok=yes + SHLIB_LD="${CC} -shared" + SHLIB_LD_LIBS="" + LD_SEARCH_FLAGS='' + ;; + *) + AC_MSG_WARN("64bit mode not supported with GCC on $system") + ;; + esac + else + do64bit_ok=yes + if test "`uname -m`" = "ia64" ; then + EXTRA_CFLAGS="+DD64" + LDFLAGS="+DD64 $LDFLAGS" + else + EXTRA_CFLAGS="+DA2.0W" + LDFLAGS="+DA2.0W $LDFLAGS" + fi + fi + fi + ;; + HP-UX-*.08.*|HP-UX-*.09.*|HP-UX-*.10.*) + SHLIB_SUFFIX=".sl" + AC_CHECK_LIB(dld, shl_load, tcl_ok=yes, tcl_ok=no) + if test "$tcl_ok" = yes; then + SHLIB_CFLAGS="+z" + SHLIB_LD="ld -b" + SHLIB_LD_LIBS="" + DL_OBJS="tclLoadShl.o" + DL_LIBS="-ldld" + LDFLAGS="-Wl,-E" + LD_SEARCH_FLAGS='-Wl,+s,+b,${LIB_RUNTIME_DIR}:.' + fi + LD_LIBRARY_PATH_VAR="SHLIB_PATH" + ;; + IRIX-4.*) + SHLIB_CFLAGS="-G 0" + SHLIB_SUFFIX=".a" + SHLIB_LD="echo tclLdAout $CC \{$SHLIB_CFLAGS\} | `pwd`/tclsh -r -G 0" + SHLIB_LD_LIBS='${LIBS}' + DL_OBJS="tclLoadAout.o" + DL_LIBS="" + LDFLAGS="-Wl,-D,08000000" + LD_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}' + SHARED_LIB_SUFFIX='${PACKAGE_VERSION}\$\{DBGX\}.a' + ;; + IRIX-5.*) + SHLIB_CFLAGS="" + SHLIB_LD="ld -shared -rdata_shared" + SHLIB_LD_LIBS='${LIBS}' + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="" + LD_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' + EXTRA_CFLAGS="" + LDFLAGS="" + ;; + IRIX-6.*|IRIX64-6.5*) + SHLIB_CFLAGS="" + SHLIB_LD="ld -n32 -shared -rdata_shared" + SHLIB_LD_LIBS='${LIBS}' + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="" + LD_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' + if test "$GCC" = "yes" ; then + EXTRA_CFLAGS="-mabi=n32" + LDFLAGS="-mabi=n32" + else + case $system in + IRIX-6.3) + # Use to build 6.2 compatible binaries on 6.3. + EXTRA_CFLAGS="-n32 -D_OLD_TERMIOS" + ;; + *) + EXTRA_CFLAGS="-n32" + ;; + esac + LDFLAGS="-n32" + fi + ;; + IRIX64-6.*) + SHLIB_CFLAGS="" + SHLIB_LD="ld -n32 -shared -rdata_shared" + SHLIB_LD_LIBS='${LIBS}' + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="" + LDFLAGS="" + LD_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' + + # Check to enable 64-bit flags for compiler/linker + + if test "$do64bit" = "yes" ; then + if test "$GCC" = "yes" ; then + AC_MSG_WARN([64bit mode not supported by gcc]) + else + do64bit_ok=yes + SHLIB_LD="ld -64 -shared -rdata_shared" + EXTRA_CFLAGS="-64" + LDFLAGS="-64" + fi + fi + ;; + Linux*) + SHLIB_CFLAGS="-fPIC" + SHLIB_LD_LIBS='${LIBS}' + SHLIB_SUFFIX=".so" + + # egcs-2.91.66 on Redhat Linux 6.0 generates lots of warnings + # when you inline the string and math operations. Turn this off to + # get rid of the warnings. + + #CFLAGS_OPTIMIZE="${CFLAGS_OPTIMIZE} -D__NO_STRING_INLINES -D__NO_MATH_INLINES" + + if test "$have_dl" = yes; then + SHLIB_LD="${CC} -shared" + DL_OBJS="tclLoadDl.o" + DL_LIBS="-ldl" + LDFLAGS="-rdynamic" + LD_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' + else + AC_CHECK_HEADER(dld.h, [ + SHLIB_LD="ld -shared" + DL_OBJS="tclLoadDld.o" + DL_LIBS="-ldld" + LDFLAGS="" + LD_SEARCH_FLAGS=""]) + fi + if test "`uname -m`" = "alpha" ; then + EXTRA_CFLAGS="-mieee" + fi + + # The combo of gcc + glibc has a bug related + # to inlining of functions like strtod(). The + # -fno-builtin flag should address this problem + # but it does not work. The -fno-inline flag + # is kind of overkill but it works. + # Disable inlining only when one of the + # files in compat/*.c is being linked in. + if test x"${USE_COMPAT}" != x ; then + EXTRA_CFLAGS="${EXTRA_CFLAGS} -fno-inline" + fi + + ;; + GNU*) + SHLIB_CFLAGS="-fPIC" + SHLIB_LD_LIBS='${LIBS}' + SHLIB_SUFFIX=".so" + + if test "$have_dl" = yes; then + SHLIB_LD="${CC} -shared" + DL_OBJS="" + DL_LIBS="-ldl" + LDFLAGS="-rdynamic" + LD_SEARCH_FLAGS="" + else + AC_CHECK_HEADER(dld.h, [ + SHLIB_LD="ld -shared" + DL_OBJS="" + DL_LIBS="-ldld" + LDFLAGS="" + LD_SEARCH_FLAGS=""]) + fi + if test "`uname -m`" = "alpha" ; then + EXTRA_CFLAGS="-mieee" + fi + ;; + MP-RAS-02*) + SHLIB_CFLAGS="-K PIC" + SHLIB_LD="cc -G" + SHLIB_LD_LIBS="" + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="-ldl" + LDFLAGS="" + LD_SEARCH_FLAGS="" + ;; + MP-RAS-*) + SHLIB_CFLAGS="-K PIC" + SHLIB_LD="cc -G" + SHLIB_LD_LIBS="" + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="-ldl" + LDFLAGS="-Wl,-Bexport" + LD_SEARCH_FLAGS="" + ;; + NetBSD-*|FreeBSD-[[1-2]].*) + # Not available on all versions: check for include file. + AC_CHECK_HEADER(dlfcn.h, [ + # NetBSD/SPARC needs -fPIC, -fpic will not do. + SHLIB_CFLAGS="-fPIC" + SHLIB_LD="ld -Bshareable -x" + SHLIB_LD_LIBS="" + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="" + LDFLAGS="" + LD_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' + AC_MSG_CHECKING([for ELF]) + AC_EGREP_CPP(yes, [ +#ifdef __ELF__ + yes +#endif + ], + AC_MSG_RESULT([yes]) + SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}\$\{DBGX\}.so', + AC_MSG_RESULT([no]) + SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}\$\{DBGX\}.so.1.0' + ) + ], [ + SHLIB_CFLAGS="" + SHLIB_LD="echo tclLdAout $CC \{$SHLIB_CFLAGS\} | `pwd`/tclsh -r" + SHLIB_LD_LIBS='${LIBS}' + SHLIB_SUFFIX=".a" + DL_OBJS="tclLoadAout.o" + DL_LIBS="" + LDFLAGS="" + LD_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}' + SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}\$\{DBGX\}.a' + ]) + + # FreeBSD doesn't handle version numbers with dots. + + UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}\$\{DBGX\}.a' + TCL_LIB_VERSIONS_OK=nodots + ;; + OpenBSD-*) + SHLIB_LD="${CC} -shared" + SHLIB_LD_LIBS='${LIBS}' + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="" + LDFLAGS="" + LD_SEARCH_FLAGS="" + AC_MSG_CHECKING(for ELF) + AC_EGREP_CPP(yes, [ +#ifdef __ELF__ + yes +#endif + ], + [AC_MSG_RESULT(yes) + SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}\$\{DBGX\}.so.1.0'], + [AC_MSG_RESULT(no) + SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}\$\{DBGX\}.so.1.0'] + ) + + # OpenBSD doesn't do version numbers with dots. + UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}\$\{DBGX\}.a' + TCL_LIB_VERSIONS_OK=nodots + ;; + FreeBSD-*) + # FreeBSD 3.* and greater have ELF. + SHLIB_CFLAGS="-fPIC" + SHLIB_LD="ld -Bshareable -x" + SHLIB_LD_LIBS='${LIBS}' + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="" + LDFLAGS="-export-dynamic" + LD_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' + if test "${TCL_THREADS}" = "1" ; then + # The -pthread needs to go in the CFLAGS, not LIBS + LIBS=`echo $LIBS | sed s/-pthread//` + EXTRA_CFLAGS="-pthread" + LDFLAGS="$LDFLAGS -pthread" + fi + case $system in + FreeBSD-3.*) + # FreeBSD-3 doesn't handle version numbers with dots. + UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}\$\{DBGX\}.a' + SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}\$\{DBGX\}.so' + TCL_LIB_VERSIONS_OK=nodots + ;; + esac + ;; + Rhapsody-*|Darwin-*) + SHLIB_CFLAGS="-fno-common" + SHLIB_LD="cc -dynamiclib \${LDFLAGS}" + TCL_SHLIB_LD_EXTRAS="-compatibility_version ${TCL_MAJOR_VERSION} -current_version \${PACKAGE_VERSION} -install_name \${LIB_RUNTIME_DIR}/\${TCL_LIB_FILE} -prebind -seg1addr 0xa000000" + SHLIB_LD_LIBS='${LIBS}' + SHLIB_SUFFIX=".dylib" + DL_OBJS="tclLoadDyld.o" + DL_LIBS="" + LDFLAGS="-prebind" + LD_SEARCH_FLAGS="" + LD_LIBRARY_PATH_VAR="DYLD_LIBRARY_PATH" + CFLAGS_OPTIMIZE="-O3" + EXTRA_CFLAGS="-arch ppc -pipe" + ;; + NEXTSTEP-*) + SHLIB_CFLAGS="" + SHLIB_LD="cc -nostdlib -r" + SHLIB_LD_LIBS="" + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadNext.o" + DL_LIBS="" + LDFLAGS="" + LD_SEARCH_FLAGS="" + ;; + OS/390-*) + CFLAGS_OPTIMIZE="" # Optimizer is buggy + AC_DEFINE(_OE_SOCKETS) # needed in sys/socket.h + ;; + OSF1-1.0|OSF1-1.1|OSF1-1.2) + # OSF/1 1.[012] from OSF, and derivatives, including Paragon OSF/1 + SHLIB_CFLAGS="" + # Hack: make package name same as library name + SHLIB_LD='ld -R -export $@:' + SHLIB_LD_LIBS="" + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadOSF.o" + DL_LIBS="" + LDFLAGS="" + LD_SEARCH_FLAGS="" + ;; + OSF1-1.*) + # OSF/1 1.3 from OSF using ELF, and derivatives, including AD2 + SHLIB_CFLAGS="-fPIC" + if test "$SHARED_BUILD" = "1" ; then + SHLIB_LD="ld -shared" + else + SHLIB_LD="ld -non_shared" + fi + SHLIB_LD_LIBS="" + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="" + LDFLAGS="" + LD_SEARCH_FLAGS="" + ;; + OSF1-V*) + # Digital OSF/1 + SHLIB_CFLAGS="" + if test "$SHARED_BUILD" = "1" ; then + SHLIB_LD='ld -shared -expect_unresolved "*"' + else + SHLIB_LD='ld -non_shared -expect_unresolved "*"' + fi + SHLIB_LD_LIBS="" + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="" + LDFLAGS="" + LD_SEARCH_FLAGS='-rpath ${LIB_RUNTIME_DIR}' + if test "$GCC" != "yes" ; then + EXTRA_CFLAGS="-DHAVE_TZSET -std1" + fi + # see pthread_intro(3) for pthread support on osf1, k.furukawa + if test "${TCL_THREADS}" = "1" ; then + EXTRA_CFLAGS="${EXTRA_CFLAGS} -DHAVE_PTHREAD_ATTR_SETSTACKSIZE" + EXTRA_CFLAGS="${EXTRA_CFLAGS} -DTCL_THREAD_STACK_MIN=PTHREAD_STACK_MIN*64" + LIBS=`echo $LIBS | sed s/-lpthreads//` + if test "$GCC" = "yes" ; then + LIBS="$LIBS -lpthread -lmach -lexc" + else + EXTRA_CFLAGS="${EXTRA_CFLAGS} -pthread" + LDFLAGS="-pthread" + fi + fi + + ;; + QNX-6*) + # QNX RTP + # This may work for all QNX, but it was only reported for v6. + SHLIB_CFLAGS="-fPIC" + SHLIB_LD="ld -Bshareable -x" + SHLIB_LD_LIBS="" + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + # dlopen is in -lc on QNX + DL_LIBS="" + LDFLAGS="" + LD_SEARCH_FLAGS="" + ;; + RISCos-*) + SHLIB_CFLAGS="-G 0" + SHLIB_LD="echo tclLdAout $CC \{$SHLIB_CFLAGS\} | `pwd`/tclsh -r -G 0" + SHLIB_LD_LIBS='${LIBS}' + SHLIB_SUFFIX=".a" + DL_OBJS="tclLoadAout.o" + DL_LIBS="" + LDFLAGS="-Wl,-D,08000000" + LD_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}' + ;; + SCO_SV-3.2*) + # Note, dlopen is available only on SCO 3.2.5 and greater. However, + # this test works, since "uname -s" was non-standard in 3.2.4 and + # below. + if test "$GCC" = "yes" ; then + SHLIB_CFLAGS="-fPIC -melf" + LDFLAGS="-melf -Wl,-Bexport" + else + SHLIB_CFLAGS="-Kpic -belf" + LDFLAGS="-belf -Wl,-Bexport" + fi + SHLIB_LD="ld -G" + SHLIB_LD_LIBS="" + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="" + LD_SEARCH_FLAGS="" + ;; + SINIX*5.4*) + SHLIB_CFLAGS="-K PIC" + SHLIB_LD="cc -G" + SHLIB_LD_LIBS="" + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="-ldl" + LDFLAGS="" + LD_SEARCH_FLAGS="" + ;; + SunOS-4*) + SHLIB_CFLAGS="-PIC" + SHLIB_LD="ld" + SHLIB_LD_LIBS="" + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="-ldl" + LDFLAGS="" + LD_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}' + + # SunOS can't handle version numbers with dots in them in library + # specs, like -ltcl7.5, so use -ltcl75 instead. Also, it + # requires an extra version number at the end of .so file names. + # So, the library has to have a name like libtcl75.so.1.0 + + SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}\$\{DBGX\}.so.1.0' + UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}\$\{DBGX\}.a' + TCL_LIB_VERSIONS_OK=nodots + ;; + SunOS-5.[[0-6]]*) + + # Note: If _REENTRANT isn't defined, then Solaris + # won't define thread-safe library routines. + + AC_DEFINE(_REENTRANT) + AC_DEFINE(_POSIX_PTHREAD_SEMANTICS) + + SHLIB_CFLAGS="-KPIC" + + # Note: need the LIBS below, otherwise Tk won't find Tcl's + # symbols when dynamically loaded into tclsh. + + SHLIB_LD_LIBS='${LIBS}' + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="-ldl" + LDFLAGS="" + if test "$GCC" = "yes" ; then + SHLIB_LD="$CC -shared" + LD_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}' + else + SHLIB_LD="/usr/ccs/bin/ld -G -z text" + LD_SEARCH_FLAGS='-R ${LIB_RUNTIME_DIR}' + fi + ;; + SunOS-5*) + + # Note: If _REENTRANT isn't defined, then Solaris + # won't define thread-safe library routines. + + AC_DEFINE(_REENTRANT) + AC_DEFINE(_POSIX_PTHREAD_SEMANTICS) + + SHLIB_CFLAGS="-KPIC" + LDFLAGS="" + + # Check to enable 64-bit flags for compiler/linker + if test "$do64bit" = "yes" ; then + arch=`isainfo` + if test "$arch" = "sparcv9 sparc" ; then + if test "$GCC" = "yes" ; then + AC_MSG_WARN("64bit mode not supported with GCC on $system") + else + do64bit_ok=yes + if test "$do64bitVIS" = "yes" ; then + EXTRA_CFLAGS="-xarch=v9a" + LDFLAGS="-xarch=v9a" + else + EXTRA_CFLAGS="-xarch=v9" + LDFLAGS="-xarch=v9" + fi + fi + else + AC_MSG_WARN("64bit mode only supported sparcv9 system") + fi + fi + + # Note: need the LIBS below, otherwise Tk won't find Tcl's + # symbols when dynamically loaded into tclsh. + + SHLIB_LD_LIBS='${LIBS}' + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="-ldl" + if test "$GCC" = "yes" ; then + SHLIB_LD="$CC -shared" + LD_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}' + else + SHLIB_LD="/usr/ccs/bin/ld -G -z text" + LD_SEARCH_FLAGS='-R ${LIB_RUNTIME_DIR}' + fi + ;; + ULTRIX-4.*) + SHLIB_CFLAGS="-G 0" + SHLIB_SUFFIX=".a" + SHLIB_LD="echo tclLdAout $CC \{$SHLIB_CFLAGS\} | `pwd`/tclsh -r -G 0" + SHLIB_LD_LIBS='${LIBS}' + DL_OBJS="tclLoadAout.o" + DL_LIBS="" + LDFLAGS="-Wl,-D,08000000" + LD_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}' + if test "$GCC" != "yes" ; then + EXTRA_CFLAGS="-DHAVE_TZSET -std1" + fi + ;; + UNIX_SV* | UnixWare-5*) + SHLIB_CFLAGS="-KPIC" + SHLIB_LD="cc -G" + SHLIB_LD_LIBS="" + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="-ldl" + # Some UNIX_SV* systems (unixware 1.1.2 for example) have linkers + # that don't grok the -Bexport option. Test that it does. + hold_ldflags=$LDFLAGS + AC_MSG_CHECKING([for ld accepts -Bexport flag]) + LDFLAGS="${LDFLAGS} -Wl,-Bexport" + AC_TRY_LINK(, [int i;], found=yes, found=no) + LDFLAGS=$hold_ldflags + AC_MSG_RESULT([$found]) + if test $found = yes; then + LDFLAGS="-Wl,-Bexport" + else + LDFLAGS="" + fi + LD_SEARCH_FLAGS="" + ;; + esac + + if test "$do64bit" = "yes" -a "$do64bit_ok" = "no" ; then + AC_MSG_WARN("64bit support being disabled -- don\'t know magic for this platform") + fi + + # Step 4: If pseudo-static linking is in use (see K. B. Kenny, "Dynamic + # Loading for Tcl -- What Became of It?". Proc. 2nd Tcl/Tk Workshop, + # New Orleans, LA, Computerized Processes Unlimited, 1994), then we need + # to determine which of several header files defines the a.out file + # format (a.out.h, sys/exec.h, or sys/exec_aout.h). At present, we + # support only a file format that is more or less version-7-compatible. + # In particular, + # - a.out files must begin with `struct exec'. + # - the N_TXTOFF on the `struct exec' must compute the seek address + # of the text segment + # - The `struct exec' must contain a_magic, a_text, a_data, a_bss + # and a_entry fields. + # The following compilation should succeed if and only if either sys/exec.h + # or a.out.h is usable for the purpose. + # + # Note that the modified COFF format used on MIPS Ultrix 4.x is usable; the + # `struct exec' includes a second header that contains information that + # duplicates the v7 fields that are needed. + + if test "x$DL_OBJS" = "xtclLoadAout.o" ; then + AC_MSG_CHECKING([sys/exec.h]) + AC_TRY_COMPILE([#include ],[ + struct exec foo; + unsigned long seek; + int flag; +#if defined(__mips) || defined(mips) + seek = N_TXTOFF (foo.ex_f, foo.ex_o); +#else + seek = N_TXTOFF (foo); +#endif + flag = (foo.a_magic == OMAGIC); + return foo.a_text + foo.a_data + foo.a_bss + foo.a_entry; + ], tcl_ok=usable, tcl_ok=unusable) + AC_MSG_RESULT([$tcl_ok]) + if test $tcl_ok = usable; then + AC_DEFINE(USE_SYS_EXEC_H) + else + AC_MSG_CHECKING([a.out.h]) + AC_TRY_COMPILE([#include ],[ + struct exec foo; + unsigned long seek; + int flag; +#if defined(__mips) || defined(mips) + seek = N_TXTOFF (foo.ex_f, foo.ex_o); +#else + seek = N_TXTOFF (foo); +#endif + flag = (foo.a_magic == OMAGIC); + return foo.a_text + foo.a_data + foo.a_bss + foo.a_entry; + ], tcl_ok=usable, tcl_ok=unusable) + AC_MSG_RESULT([$tcl_ok]) + if test $tcl_ok = usable; then + AC_DEFINE(USE_A_OUT_H) + else + AC_MSG_CHECKING([sys/exec_aout.h]) + AC_TRY_COMPILE([#include ],[ + struct exec foo; + unsigned long seek; + int flag; +#if defined(__mips) || defined(mips) + seek = N_TXTOFF (foo.ex_f, foo.ex_o); +#else + seek = N_TXTOFF (foo); +#endif + flag = (foo.a_midmag == OMAGIC); + return foo.a_text + foo.a_data + foo.a_bss + foo.a_entry; + ], tcl_ok=usable, tcl_ok=unusable) + AC_MSG_RESULT([$tcl_ok]) + if test $tcl_ok = usable; then + AC_DEFINE(USE_SYS_EXEC_AOUT_H) + else + DL_OBJS="" + fi + fi + fi + fi + + # Step 5: disable dynamic loading if requested via a command-line switch. + + AC_ARG_ENABLE(load, [ --disable-load disallow dynamic loading and "load" command], + [tcl_ok=$enableval], [tcl_ok=yes]) + if test "$tcl_ok" = "no"; then + DL_OBJS="" + fi + + if test "x$DL_OBJS" != "x" ; then + BUILD_DLTEST="\$(DLTEST_TARGETS)" + else + echo "Can't figure out how to do dynamic loading or shared libraries" + echo "on this system." + SHLIB_CFLAGS="" + SHLIB_LD="" + SHLIB_SUFFIX="" + DL_OBJS="tclLoadNone.o" + DL_LIBS="" + LDFLAGS="" + LD_SEARCH_FLAGS="" + BUILD_DLTEST="" + fi + + # If we're running gcc, then change the C flags for compiling shared + # libraries to the right flags for gcc, instead of those for the + # standard manufacturer compiler. + + if test "$DL_OBJS" != "tclLoadNone.o" ; then + if test "$GCC" = "yes" ; then + case $system in + AIX-*) + ;; + BSD/OS*) + ;; + IRIX*) + ;; + NetBSD-*|FreeBSD-*) + ;; + Rhapsody-*|Darwin-*) + ;; + RISCos-*) + ;; + SCO_SV-3.2*) + ;; + ULTRIX-4.*) + ;; + windows) + ;; + *) + SHLIB_CFLAGS="-fPIC" + ;; + esac + fi + fi + + if test "$SHARED_LIB_SUFFIX" = "" ; then + SHARED_LIB_SUFFIX='${PACKAGE_VERSION}\$\{DBGX\}${SHLIB_SUFFIX}' + fi + if test "$UNSHARED_LIB_SUFFIX" = "" ; then + UNSHARED_LIB_SUFFIX='${PACKAGE_VERSION}\$\{DBGX\}.a' + fi + + AC_SUBST(DL_LIBS) + AC_SUBST(CFLAGS_DEBUG) + AC_SUBST(CFLAGS_OPTIMIZE) + AC_SUBST(CFLAGS_WARNING) + AC_SUBST(EXTRA_CFLAGS) + + AC_SUBST(STLIB_LD) + AC_SUBST(SHLIB_LD) + AC_SUBST(SHLIB_CFLAGS) + AC_SUBST(SHLIB_LD_FLAGS) + AC_SUBST(SHLIB_LD_LIBS) + AC_SUBST(LDFLAGS_DEBUG) + AC_SUBST(LDFLAGS_OPTIMIZE) + AC_SUBST(LD_LIBRARY_PATH_VAR) +]) + +#-------------------------------------------------------------------- +# TEA_SERIAL_PORT +# +# Determine which interface to use to talk to the serial port. +# Note that #include lines must begin in leftmost column for +# some compilers to recognize them as preprocessor directives, +# and some build environments have stdin not pointing at a +# pseudo-terminal (usually /dev/null instead.) +# +# Arguments: +# none +# +# Results: +# +# Defines only one of the following vars: +# HAVE_SYS_MODEM_H +# USE_TERMIOS +# USE_TERMIO +# USE_SGTTY +# +#-------------------------------------------------------------------- + +AC_DEFUN(TEA_SERIAL_PORT, [ + AC_CHECK_HEADERS(sys/modem.h) + AC_MSG_CHECKING([termios vs. termio vs. sgtty]) + AC_CACHE_VAL(tcl_cv_api_serial, [ + AC_TRY_RUN([ +#include + +int main() { + struct termios t; + if (tcgetattr(0, &t) == 0) { + cfsetospeed(&t, 0); + t.c_cflag |= PARENB | PARODD | CSIZE | CSTOPB; + return 0; + } + return 1; +}], tcl_cv_api_serial=termios, tcl_cv_api_serial=no, tcl_cv_api_serial=no) + if test $tcl_cv_api_serial = no ; then + AC_TRY_RUN([ +#include + +int main() { + struct termio t; + if (ioctl(0, TCGETA, &t) == 0) { + t.c_cflag |= CBAUD | PARENB | PARODD | CSIZE | CSTOPB; + return 0; + } + return 1; +}], tcl_cv_api_serial=termio, tcl_cv_api_serial=no, tcl_cv_api_serial=no) + fi + if test $tcl_cv_api_serial = no ; then + AC_TRY_RUN([ +#include + +int main() { + struct sgttyb t; + if (ioctl(0, TIOCGETP, &t) == 0) { + t.sg_ospeed = 0; + t.sg_flags |= ODDP | EVENP | RAW; + return 0; + } + return 1; +}], tcl_cv_api_serial=sgtty, tcl_cv_api_serial=none, tcl_cv_api_serial=none) + fi + if test $tcl_cv_api_serial = no ; then + AC_TRY_RUN([ +#include +#include + +int main() { + struct termios t; + if (tcgetattr(0, &t) == 0 + || errno == ENOTTY || errno == ENXIO || errno == EINVAL) { + cfsetospeed(&t, 0); + t.c_cflag |= PARENB | PARODD | CSIZE | CSTOPB; + return 0; + } + return 1; +}], tcl_cv_api_serial=termios, tcl_cv_api_serial=no, tcl_cv_api_serial=no) + fi + if test $tcl_cv_api_serial = no; then + AC_TRY_RUN([ +#include +#include + +int main() { + struct termio t; + if (ioctl(0, TCGETA, &t) == 0 + || errno == ENOTTY || errno == ENXIO || errno == EINVAL) { + t.c_cflag |= CBAUD | PARENB | PARODD | CSIZE | CSTOPB; + return 0; + } + return 1; + }], tcl_cv_api_serial=termio, tcl_cv_api_serial=no, tcl_cv_api_serial=no) + fi + if test $tcl_cv_api_serial = no; then + AC_TRY_RUN([ +#include +#include + +int main() { + struct sgttyb t; + if (ioctl(0, TIOCGETP, &t) == 0 + || errno == ENOTTY || errno == ENXIO || errno == EINVAL) { + t.sg_ospeed = 0; + t.sg_flags |= ODDP | EVENP | RAW; + return 0; + } + return 1; +}], tcl_cv_api_serial=sgtty, tcl_cv_api_serial=none, tcl_cv_api_serial=none) + fi]) + case $tcl_cv_api_serial in + termios) AC_DEFINE(USE_TERMIOS);; + termio) AC_DEFINE(USE_TERMIO);; + sgtty) AC_DEFINE(USE_SGTTY);; + esac + AC_MSG_RESULT([$tcl_cv_api_serial]) +]) + +#-------------------------------------------------------------------- +# TEA_MISSING_POSIX_HEADERS +# +# Supply substitutes for missing POSIX header files. Special +# notes: +# - stdlib.h doesn't define strtol, strtoul, or +# strtod insome versions of SunOS +# - some versions of string.h don't declare procedures such +# as strstr +# +# Arguments: +# none +# +# Results: +# +# Defines some of the following vars: +# NO_DIRENT_H +# NO_ERRNO_H +# NO_VALUES_H +# NO_LIMITS_H +# NO_STDLIB_H +# NO_STRING_H +# NO_SYS_WAIT_H +# NO_DLFCN_H +# HAVE_UNISTD_H +# HAVE_SYS_PARAM_H +# +# HAVE_STRING_H ? +# +#-------------------------------------------------------------------- + +AC_DEFUN(TEA_MISSING_POSIX_HEADERS, [ + AC_MSG_CHECKING([dirent.h]) + AC_TRY_LINK([#include +#include ], [ +#ifndef _POSIX_SOURCE +# ifdef __Lynx__ + /* + * Generate compilation error to make the test fail: Lynx headers + * are only valid if really in the POSIX environment. + */ + + missing_procedure(); +# endif +#endif +DIR *d; +struct dirent *entryPtr; +char *p; +d = opendir("foobar"); +entryPtr = readdir(d); +p = entryPtr->d_name; +closedir(d); +], tcl_ok=yes, tcl_ok=no) + + if test $tcl_ok = no; then + AC_DEFINE(NO_DIRENT_H) + fi + + AC_MSG_RESULT([$tcl_ok]) + AC_CHECK_HEADER(errno.h, , [AC_DEFINE(NO_ERRNO_H)]) + AC_CHECK_HEADER(float.h, , [AC_DEFINE(NO_FLOAT_H)]) + AC_CHECK_HEADER(values.h, , [AC_DEFINE(NO_VALUES_H)]) + AC_CHECK_HEADER(limits.h, , [AC_DEFINE(NO_LIMITS_H)]) + AC_CHECK_HEADER(stdlib.h, tcl_ok=1, tcl_ok=0) + AC_EGREP_HEADER(strtol, stdlib.h, , tcl_ok=0) + AC_EGREP_HEADER(strtoul, stdlib.h, , tcl_ok=0) + AC_EGREP_HEADER(strtod, stdlib.h, , tcl_ok=0) + if test $tcl_ok = 0; then + AC_DEFINE(NO_STDLIB_H) + fi + AC_CHECK_HEADER(string.h, tcl_ok=1, tcl_ok=0) + AC_EGREP_HEADER(strstr, string.h, , tcl_ok=0) + AC_EGREP_HEADER(strerror, string.h, , tcl_ok=0) + + # See also memmove check below for a place where NO_STRING_H can be + # set and why. + + if test $tcl_ok = 0; then + AC_DEFINE(NO_STRING_H) + fi + + AC_CHECK_HEADER(sys/wait.h, , [AC_DEFINE(NO_SYS_WAIT_H)]) + AC_CHECK_HEADER(dlfcn.h, , [AC_DEFINE(NO_DLFCN_H)]) + + # OS/390 lacks sys/param.h (and doesn't need it, by chance). + # tkUnixPort.h checks for HAVE_LIMITS_H, so do both HAVE and + # CHECK on limits.h + + AC_HAVE_HEADERS(limits.h unistd.h sys/param.h) + +]) + +#-------------------------------------------------------------------- +# TEA_PATH_X +# +# Locate the X11 header files and the X11 library archive. Try +# the ac_path_x macro first, but if it doesn't find the X stuff +# (e.g. because there's no xmkmf program) then check through +# a list of possible directories. Under some conditions the +# autoconf macro will return an include directory that contains +# no include files, so double-check its result just to be safe. +# +# This should be called after TEA_CONFIG_CFLAGS as setting the +# LIBS line can confuse some configure macro magic. +# +# Arguments: +# none +# +# Results: +# +# Sets the following vars: +# XINCLUDES +# XLIBSW +# LIBS (appends to) +# +#-------------------------------------------------------------------- + +AC_DEFUN(TEA_PATH_X, [ + if test "${TEA_PLATFORM}" = "unix" ; then + TEA_PATH_UNIX_X + fi +]) + +AC_DEFUN(TEA_PATH_UNIX_X, [ + AC_PATH_X + not_really_there="" + if test "$no_x" = ""; then + if test "$x_includes" = ""; then + AC_TRY_CPP([#include ], , not_really_there="yes") + else + if test ! -r $x_includes/X11/Intrinsic.h; then + not_really_there="yes" + fi + fi + fi + if test "$no_x" = "yes" -o "$not_really_there" = "yes"; then + AC_MSG_CHECKING([for X11 header files]) + XINCLUDES="# no special path needed" + AC_TRY_CPP([#include ], , XINCLUDES="nope") + if test "$XINCLUDES" = nope; then + dirs="/usr/unsupported/include /usr/local/include /usr/X386/include /usr/X11R6/include /usr/X11R5/include /usr/include/X11R5 /usr/include/X11R4 /usr/openwin/include /usr/X11/include /usr/sww/include" + for i in $dirs ; do + if test -r $i/X11/Intrinsic.h; then + AC_MSG_RESULT([$i]) + XINCLUDES=" -I$i" + break + fi + done + fi + else + if test "$x_includes" != ""; then + XINCLUDES=-I$x_includes + else + XINCLUDES="# no special path needed" + fi + fi + if test "$XINCLUDES" = nope; then + AC_MSG_RESULT([could not find any!]) + XINCLUDES="# no include files found" + fi + + if test "$no_x" = yes; then + AC_MSG_CHECKING([for X11 libraries]) + XLIBSW=nope + dirs="/usr/unsupported/lib /usr/local/lib /usr/X386/lib /usr/X11R6/lib /usr/X11R5/lib /usr/lib/X11R5 /usr/lib/X11R4 /usr/openwin/lib /usr/X11/lib /usr/sww/X11/lib" + for i in $dirs ; do + if test -r $i/libX11.a -o -r $i/libX11.so -o -r $i/libX11.sl; then + AC_MSG_RESULT([$i]) + XLIBSW="-L$i -lX11" + x_libraries="$i" + break + fi + done + else + if test "$x_libraries" = ""; then + XLIBSW=-lX11 + else + XLIBSW="-L$x_libraries -lX11" + fi + fi + if test "$XLIBSW" = nope ; then + AC_CHECK_LIB(Xwindow, XCreateWindow, XLIBSW=-lXwindow) + fi + if test "$XLIBSW" = nope ; then + AC_MSG_RESULT([could not find any! Using -lX11.]) + XLIBSW=-lX11 + fi + if test x"${XLIBSW}" != x ; then + PKG_LIBS="${PKG_LIBS} ${XLIBSW}" + fi +]) + +#-------------------------------------------------------------------- +# TEA_BLOCKING_STYLE +# +# The statements below check for systems where POSIX-style +# non-blocking I/O (O_NONBLOCK) doesn't work or is unimplemented. +# On these systems (mostly older ones), use the old BSD-style +# FIONBIO approach instead. +# +# Arguments: +# none +# +# Results: +# +# Defines some of the following vars: +# HAVE_SYS_IOCTL_H +# HAVE_SYS_FILIO_H +# USE_FIONBIO +# O_NONBLOCK +# +#-------------------------------------------------------------------- + +AC_DEFUN(TEA_BLOCKING_STYLE, [ + AC_CHECK_HEADERS(sys/ioctl.h) + AC_CHECK_HEADERS(sys/filio.h) + AC_MSG_CHECKING([FIONBIO vs. O_NONBLOCK for nonblocking I/O]) + if test -f /usr/lib/NextStep/software_version; then + system=NEXTSTEP-`awk '/3/,/3/' /usr/lib/NextStep/software_version` + else + system=`uname -s`-`uname -r` + if test "$?" -ne 0 ; then + system=unknown + else + # Special check for weird MP-RAS system (uname returns weird + # results, and the version is kept in special file). + + if test -r /etc/.relid -a "X`uname -n`" = "X`uname -s`" ; then + system=MP-RAS-`awk '{print $3}' /etc/.relid'` + fi + if test "`uname -s`" = "AIX" ; then + system=AIX-`uname -v`.`uname -r` + fi + fi + fi + case $system in + # There used to be code here to use FIONBIO under AIX. However, it + # was reported that FIONBIO doesn't work under AIX 3.2.5. Since + # using O_NONBLOCK seems fine under AIX 4.*, I removed the FIONBIO + # code (JO, 5/31/97). + + OSF*) + AC_DEFINE(USE_FIONBIO) + AC_MSG_RESULT([FIONBIO]) + ;; + SunOS-4*) + AC_DEFINE(USE_FIONBIO) + AC_MSG_RESULT([FIONBIO]) + ;; + ULTRIX-4.*) + AC_DEFINE(USE_FIONBIO) + AC_MSG_RESULT([FIONBIO]) + ;; + *) + AC_MSG_RESULT([O_NONBLOCK]) + ;; + esac +]) + +#-------------------------------------------------------------------- +# TEA_TIME_HANLDER +# +# Checks how the system deals with time.h, what time structures +# are used on the system, and what fields the structures have. +# +# Arguments: +# none +# +# Results: +# +# Defines some of the following vars: +# USE_DELTA_FOR_TZ +# HAVE_TM_GMTOFF +# HAVE_TM_TZADJ +# HAVE_TIMEZONE_VAR +# +#-------------------------------------------------------------------- + +AC_DEFUN(TEA_TIME_HANDLER, [ + AC_CHECK_HEADERS(sys/time.h) + AC_HEADER_TIME + AC_STRUCT_TIMEZONE + + AC_CHECK_FUNCS(gmtime_r localtime_r) + + AC_MSG_CHECKING([tm_tzadj in struct tm]) + AC_CACHE_VAL(tcl_cv_member_tm_tzadj, + AC_TRY_COMPILE([#include ], [struct tm tm; tm.tm_tzadj;], + tcl_cv_member_tm_tzadj=yes, tcl_cv_member_tm_tzadj=no)) + AC_MSG_RESULT([$tcl_cv_member_tm_tzadj]) + if test $tcl_cv_member_tm_tzadj = yes ; then + AC_DEFINE(HAVE_TM_TZADJ) + fi + + AC_MSG_CHECKING([tm_gmtoff in struct tm]) + AC_CACHE_VAL(tcl_cv_member_tm_gmtoff, + AC_TRY_COMPILE([#include ], [struct tm tm; tm.tm_gmtoff;], + tcl_cv_member_tm_gmtoff=yes, tcl_cv_member_tm_gmtoff=no)) + AC_MSG_RESULT([$tcl_cv_member_tm_gmtoff]) + if test $tcl_cv_member_tm_gmtoff = yes ; then + AC_DEFINE(HAVE_TM_GMTOFF) + fi + + # + # Its important to include time.h in this check, as some systems + # (like convex) have timezone functions, etc. + # + AC_MSG_CHECKING([long timezone variable]) + AC_CACHE_VAL(tcl_cv_var_timezone, + AC_TRY_COMPILE([#include ], + [extern long timezone; + timezone += 1; + exit (0);], + tcl_cv_timezone_long=yes, tcl_cv_timezone_long=no)) + AC_MSG_RESULT([$tcl_cv_timezone_long]) + if test $tcl_cv_timezone_long = yes ; then + AC_DEFINE(HAVE_TIMEZONE_VAR) + else + # + # On some systems (eg IRIX 6.2), timezone is a time_t and not a long. + # + AC_MSG_CHECKING([time_t timezone variable]) + AC_CACHE_VAL(tcl_cv_timezone_time, + AC_TRY_COMPILE([#include ], + [extern time_t timezone; + timezone += 1; + exit (0);], + tcl_cv_timezone_time=yes, tcl_cv_timezone_time=no)) + AC_MSG_RESULT([$tcl_cv_timezone_time]) + if test $tcl_cv_timezone_time = yes ; then + AC_DEFINE(HAVE_TIMEZONE_VAR) + fi + fi +]) + +#-------------------------------------------------------------------- +# TEA_BUGGY_STRTOD +# +# Under Solaris 2.4, strtod returns the wrong value for the +# terminating character under some conditions. Check for this +# and if the problem exists use a substitute procedure +# "fixstrtod" (provided by Tcl) that corrects the error. +# Also, on Compaq's Tru64 Unix 5.0, +# strtod(" ") returns 0.0 instead of a failure to convert. +# +# Arguments: +# none +# +# Results: +# +# Might defines some of the following vars: +# strtod (=fixstrtod) +# +#-------------------------------------------------------------------- + +AC_DEFUN(TEA_BUGGY_STRTOD, [ + AC_CHECK_FUNC(strtod, tcl_strtod=1, tcl_strtod=0) + if test "$tcl_strtod" = 1; then + AC_MSG_CHECKING([for Solaris2.4/Tru64 strtod bugs]) + AC_TRY_RUN([ + extern double strtod(); + int main() + { + char *string = "NaN", *spaceString = " "; + char *term; + double value; + value = strtod(string, &term); + if ((term != string) && (term[-1] == 0)) { + exit(1); + } + value = strtod(spaceString, &term); + if (term == (spaceString+1)) { + exit(1); + } + exit(0); + }], tcl_ok=1, tcl_ok=0, tcl_ok=0) + if test "$tcl_ok" = 1; then + AC_MSG_RESULT([ok]) + else + AC_MSG_RESULT([buggy]) + #LIBOBJS="$LIBOBJS fixstrtod.o" + AC_LIBOBJ([fixstrtod]) + USE_COMPAT=1 + AC_DEFINE(strtod, fixstrtod) + fi + fi +]) + +#-------------------------------------------------------------------- +# TEA_TCL_LINK_LIBS +# +# Search for the libraries needed to link the Tcl shell. +# Things like the math library (-lm) and socket stuff (-lsocket vs. +# -lnsl) are dealt with here. +# +# Arguments: +# Requires the following vars to be set in the Makefile: +# DL_LIBS +# LIBS +# MATH_LIBS +# +# Results: +# +# Subst's the following var: +# TCL_LIBS +# MATH_LIBS +# +# Might append to the following vars: +# LIBS +# +# Might define the following vars: +# HAVE_NET_ERRNO_H +# +#-------------------------------------------------------------------- + +AC_DEFUN(TEA_TCL_LINK_LIBS, [ + #-------------------------------------------------------------------- + # On a few very rare systems, all of the libm.a stuff is + # already in libc.a. Set compiler flags accordingly. + # Also, Linux requires the "ieee" library for math to work + # right (and it must appear before "-lm"). + #-------------------------------------------------------------------- + + AC_CHECK_FUNC(sin, MATH_LIBS="", MATH_LIBS="-lm") + AC_CHECK_LIB(ieee, main, [MATH_LIBS="-lieee $MATH_LIBS"]) + + #-------------------------------------------------------------------- + # Interactive UNIX requires -linet instead of -lsocket, plus it + # needs net/errno.h to define the socket-related error codes. + #-------------------------------------------------------------------- + + AC_CHECK_LIB(inet, main, [LIBS="$LIBS -linet"]) + AC_CHECK_HEADER(net/errno.h, AC_DEFINE(HAVE_NET_ERRNO_H)) + + #-------------------------------------------------------------------- + # Check for the existence of the -lsocket and -lnsl libraries. + # The order here is important, so that they end up in the right + # order in the command line generated by make. Here are some + # special considerations: + # 1. Use "connect" and "accept" to check for -lsocket, and + # "gethostbyname" to check for -lnsl. + # 2. Use each function name only once: can't redo a check because + # autoconf caches the results of the last check and won't redo it. + # 3. Use -lnsl and -lsocket only if they supply procedures that + # aren't already present in the normal libraries. This is because + # IRIX 5.2 has libraries, but they aren't needed and they're + # bogus: they goof up name resolution if used. + # 4. On some SVR4 systems, can't use -lsocket without -lnsl too. + # To get around this problem, check for both libraries together + # if -lsocket doesn't work by itself. + #-------------------------------------------------------------------- + + tcl_checkBoth=0 + AC_CHECK_FUNC(connect, tcl_checkSocket=0, tcl_checkSocket=1) + if test "$tcl_checkSocket" = 1; then + AC_CHECK_FUNC(setsockopt, , [AC_CHECK_LIB(socket, setsockopt, + LIBS="$LIBS -lsocket", tcl_checkBoth=1)]) + fi + if test "$tcl_checkBoth" = 1; then + tk_oldLibs=$LIBS + LIBS="$LIBS -lsocket -lnsl" + AC_CHECK_FUNC(accept, tcl_checkNsl=0, [LIBS=$tk_oldLibs]) + fi + AC_CHECK_FUNC(gethostbyname, , [AC_CHECK_LIB(nsl, gethostbyname, + [LIBS="$LIBS -lnsl"])]) + + # Don't perform the eval of the libraries here because DL_LIBS + # won't be set until we call TEA_CONFIG_CFLAGS + + TCL_LIBS='${DL_LIBS} ${LIBS} ${MATH_LIBS}' + AC_SUBST(TCL_LIBS) + AC_SUBST(MATH_LIBS) +]) + +#-------------------------------------------------------------------- +# TEA_TCL_EARLY_FLAGS +# +# Check for what flags are needed to be passed so the correct OS +# features are available. +# +# Arguments: +# None +# +# Results: +# +# Might define the following vars: +# _ISOC99_SOURCE +# _LARGEFILE64_SOURCE +# +#-------------------------------------------------------------------- + +AC_DEFUN(TEA_TCL_EARLY_FLAG,[ + AC_CACHE_VAL([tcl_cv_flag_]translit($1,[A-Z],[a-z]), + AC_TRY_COMPILE([$2], $3, [tcl_cv_flag_]translit($1,[A-Z],[a-z])=no, + AC_TRY_COMPILE([[#define ]$1[ 1 +]$2], $3, + [tcl_cv_flag_]translit($1,[A-Z],[a-z])=yes, + [tcl_cv_flag_]translit($1,[A-Z],[a-z])=no))) + if test ["x${tcl_cv_flag_]translit($1,[A-Z],[a-z])[}" = "xyes"] ; then + AC_DEFINE($1) + tcl_flags="$tcl_flags $1" + fi +]) + +AC_DEFUN(TEA_TCL_EARLY_FLAGS,[ + AC_MSG_CHECKING([for required early compiler flags]) + tcl_flags="" + TEA_TCL_EARLY_FLAG(_ISOC99_SOURCE,[#include ], + [char *p = (char *)strtoll; char *q = (char *)strtoull;]) + TEA_TCL_EARLY_FLAG(_LARGEFILE64_SOURCE,[#include ], + [struct stat64 buf; int i = stat64("/", &buf);]) + if test "x${tcl_flags}" = "x" ; then + AC_MSG_RESULT([none]) + else + AC_MSG_RESULT([${tcl_flags}]) + fi +]) + +#-------------------------------------------------------------------- +# TEA_TCL_64BIT_FLAGS +# +# Check for what is defined in the way of 64-bit features. +# +# Arguments: +# None +# +# Results: +# +# Might define the following vars: +# TCL_WIDE_INT_IS_LONG +# TCL_WIDE_INT_TYPE +# HAVE_STRUCT_DIRENT64 +# HAVE_STRUCT_STAT64 +# HAVE_TYPE_OFF64_T +# +#-------------------------------------------------------------------- + +AC_DEFUN(TEA_TCL_64BIT_FLAGS, [ + AC_MSG_CHECKING([for 64-bit integer type]) + AC_CACHE_VAL(tcl_cv_type_64bit,[ + AC_TRY_COMPILE(,[__int64 value = (__int64) 0;], + tcl_cv_type_64bit=__int64,tcl_cv_type_64bit=none + AC_TRY_RUN([#include + int main() {exit(!(sizeof(long long) > sizeof(long)));} + ], tcl_cv_type_64bit="long long"))]) + if test "${tcl_cv_type_64bit}" = none ; then + AC_MSG_RESULT([using long]) + elif test "${tcl_cv_type_64bit}" = "__int64" ; then + # We actually want to use the default tcl.h checks in this + # case to handle both TCL_WIDE_INT_TYPE and TCL_LL_MODIFIER* + AC_MSG_RESULT([using Tcl header defaults]) + else + AC_DEFINE_UNQUOTED(TCL_WIDE_INT_TYPE,${tcl_cv_type_64bit}) + AC_MSG_RESULT([${tcl_cv_type_64bit}]) + + # Now check for auxiliary declarations + AC_MSG_CHECKING([for struct dirent64]) + AC_CACHE_VAL(tcl_cv_struct_dirent64,[ + AC_TRY_COMPILE([#include +#include ],[struct dirent64 p;], + tcl_cv_struct_dirent64=yes,tcl_cv_struct_dirent64=no)]) + if test "x${tcl_cv_struct_dirent64}" = "xyes" ; then + AC_DEFINE(HAVE_STRUCT_DIRENT64) + fi + AC_MSG_RESULT([${tcl_cv_struct_dirent64}]) + + AC_MSG_CHECKING([for struct stat64]) + AC_CACHE_VAL(tcl_cv_struct_stat64,[ + AC_TRY_COMPILE([#include ],[struct stat64 p; +], + tcl_cv_struct_stat64=yes,tcl_cv_struct_stat64=no)]) + if test "x${tcl_cv_struct_stat64}" = "xyes" ; then + AC_DEFINE(HAVE_STRUCT_STAT64) + fi + AC_MSG_RESULT([${tcl_cv_struct_stat64}]) + + AC_MSG_CHECKING([for off64_t]) + AC_CACHE_VAL(tcl_cv_type_off64_t,[ + AC_TRY_COMPILE([#include ],[off64_t offset; +], + tcl_cv_type_off64_t=yes,tcl_cv_type_off64_t=no)]) + if test "x${tcl_cv_type_off64_t}" = "xyes" ; then + AC_DEFINE(HAVE_TYPE_OFF64_T) + fi + AC_MSG_RESULT([${tcl_cv_type_off64_t}]) + fi +]) + +## +## Here ends the standard Tcl configuration bits and starts the +## TEA specific functions +## + +#------------------------------------------------------------------------ +# TEA_INIT -- +# +# Init various Tcl Extension Architecture (TEA) variables. +# This should be the first called TEA_* macro. +# +# Arguments: +# none +# +# Results: +# +# Defines and substs the following vars: +# CYGPATH +# EXEEXT +# Defines only: +# TEA_INITED +# TEA_PLATFORM (windows or unix) +# +# "cygpath" is used on windows to generate native path names for include +# files. These variables should only be used with the compiler and linker +# since they generate native path names. +# +# EXEEXT +# Select the executable extension based on the host type. This +# is a lightweight replacement for AC_EXEEXT that doesn't require +# a compiler. +#------------------------------------------------------------------------ + +AC_DEFUN(TEA_INIT, [ + TEA_VERSION="3.0" + + AC_MSG_CHECKING([for correct TEA configuration]) + if test x"${PACKAGE_NAME}" = x ; then + AC_MSG_ERROR([ +The PACKAGE_NAME variable must be defined by your TEA configure.in]) + fi + if test x"$1" = x ; then + AC_MSG_ERROR([ +TEA version not specified.]) + elif test "$1" != "${TEA_VERSION}" ; then + AC_MSG_RESULT([warning: TEA version "$1" != ${TEA_VERSION}]) + else + AC_MSG_RESULT([ok]) + fi + case "`uname -s`" in + *win32*|*WIN32*|*CYGWIN_NT*|*CYGWIN_9*|*CYGWIN_ME*|*MINGW32_*) + AC_CHECK_PROG(CYGPATH, cygpath, cygpath -w, echo) + EXEEXT=".exe" + TEA_PLATFORM="windows" + ;; + *) + CYGPATH=echo + EXEEXT="" + TEA_PLATFORM="unix" + ;; + esac + + # Check if exec_prefix is set. If not use fall back to prefix + if test x$exec_prefix = xNONE ; then exec_prefix=$prefix ; fi + + AC_SUBST(EXEEXT) + AC_SUBST(CYGPATH) + + # This package name must be replaced statically for AC_SUBST to work + AC_SUBST(PKG_LIB_FILE) + # Substitute STUB_LIB_FILE in case package creates a stub library too. + AC_SUBST(PKG_STUB_LIB_FILE) + + # We AC_SUBST these here to ensure they are subst'ed, + # in case the user doesn't call TEA_ADD_... + AC_SUBST(PKG_STUB_SOURCES) + AC_SUBST(PKG_STUB_OBJECTS) + AC_SUBST(PKG_TCL_SOURCES) + AC_SUBST(PKG_HEADERS) + AC_SUBST(PKG_INCLUDES) + AC_SUBST(PKG_LIBS) + AC_SUBST(PKG_CFLAGS) +]) + +#------------------------------------------------------------------------ +# TEA_ADD_SOURCES -- +# +# Specify one or more source files. Users should check for +# the right platform before adding to their list. +# It is not important to specify the directory, as long as it is +# in the generic, win or unix subdirectory of $(srcdir). +# +# Arguments: +# one or more file names +# +# Results: +# +# Defines and substs the following vars: +# PKG_SOURCES +# PKG_OBJECTS +#------------------------------------------------------------------------ +AC_DEFUN(TEA_ADD_SOURCES, [ + vars="$@" + for i in $vars; do + case $i in + [\$]*) + # allow $-var names + PKG_SOURCES="$PKG_SOURCES $i" + PKG_OBJECTS="$PKG_OBJECTS $i" + ;; + *) + # check for existence - allows for generic/win/unix VPATH + if test ! -f "${srcdir}/$i" -a ! -f "${srcdir}/generic/$i" \ + -a ! -f "${srcdir}/win/$i" -a ! -f "${srcdir}/unix/$i" \ + ; then + AC_MSG_ERROR([could not find source file '$i']) + fi + PKG_SOURCES="$PKG_SOURCES $i" + # this assumes it is in a VPATH dir + i=`basename $i` + # handle user calling this before or after TEA_SETUP_COMPILER + if test x"${OBJEXT}" != x ; then + j="`echo $i | sed -e 's/\.[[^.]]*$//'`.${OBJEXT}" + else + j="`echo $i | sed -e 's/\.[[^.]]*$//'`.\${OBJEXT}" + fi + PKG_OBJECTS="$PKG_OBJECTS $j" + ;; + esac + done + AC_SUBST(PKG_SOURCES) + AC_SUBST(PKG_OBJECTS) +]) + +#------------------------------------------------------------------------ +# TEA_ADD_STUB_SOURCES -- +# +# Specify one or more source files. Users should check for +# the right platform before adding to their list. +# It is not important to specify the directory, as long as it is +# in the generic, win or unix subdirectory of $(srcdir). +# +# Arguments: +# one or more file names +# +# Results: +# +# Defines and substs the following vars: +# PKG_STUB_SOURCES +# PKG_STUB_OBJECTS +#------------------------------------------------------------------------ +AC_DEFUN(TEA_ADD_STUB_SOURCES, [ + vars="$@" + for i in $vars; do + # check for existence - allows for generic/win/unix VPATH + if test ! -f "${srcdir}/$i" -a ! -f "${srcdir}/generic/$i" \ + -a ! -f "${srcdir}/win/$i" -a ! -f "${srcdir}/unix/$i" \ + ; then + AC_MSG_ERROR([could not find stub source file '$i']) + fi + PKG_STUB_SOURCES="$PKG_STUB_SOURCES $i" + # this assumes it is in a VPATH dir + i=`basename $i` + # handle user calling this before or after TEA_SETUP_COMPILER + if test x"${OBJEXT}" != x ; then + j="`echo $i | sed -e 's/\.[[^.]]*$//'`.${OBJEXT}" + else + j="`echo $i | sed -e 's/\.[[^.]]*$//'`.\${OBJEXT}" + fi + PKG_STUB_OBJECTS="$PKG_STUB_OBJECTS $j" + done + AC_SUBST(PKG_STUB_SOURCES) + AC_SUBST(PKG_STUB_OBJECTS) +]) + +#------------------------------------------------------------------------ +# TEA_ADD_TCL_SOURCES -- +# +# Specify one or more Tcl source files. These should be platform +# independent runtime files. +# +# Arguments: +# one or more file names +# +# Results: +# +# Defines and substs the following vars: +# PKG_TCL_SOURCES +#------------------------------------------------------------------------ +AC_DEFUN(TEA_ADD_TCL_SOURCES, [ + vars="$@" + for i in $vars; do + # check for existence, be strict because it is installed + if test ! -f "${srcdir}/$i" ; then + AC_MSG_ERROR([could not find tcl source file '${srcdir}/$i']) + fi + PKG_TCL_SOURCES="$PKG_TCL_SOURCES $i" + done + AC_SUBST(PKG_TCL_SOURCES) +]) + +#------------------------------------------------------------------------ +# TEA_ADD_HEADERS -- +# +# Specify one or more source headers. Users should check for +# the right platform before adding to their list. +# +# Arguments: +# one or more file names +# +# Results: +# +# Defines and substs the following vars: +# PKG_HEADERS +#------------------------------------------------------------------------ +AC_DEFUN(TEA_ADD_HEADERS, [ + vars="$@" + for i in $vars; do + # check for existence, be strict because it is installed + if test ! -f "${srcdir}/$i" ; then + AC_MSG_ERROR([could not find header file '${srcdir}/$i']) + fi + PKG_HEADERS="$PKG_HEADERS $i" + done + AC_SUBST(PKG_HEADERS) +]) + +#------------------------------------------------------------------------ +# TEA_ADD_INCLUDES -- +# +# Specify one or more include dirs. Users should check for +# the right platform before adding to their list. +# +# Arguments: +# one or more file names +# +# Results: +# +# Defines and substs the following vars: +# PKG_INCLUDES +#------------------------------------------------------------------------ +AC_DEFUN(TEA_ADD_INCLUDES, [ + vars="$@" + for i in $vars; do + PKG_INCLUDES="$PKG_INCLUDES $i" + done + AC_SUBST(PKG_INCLUDES) +]) + +#------------------------------------------------------------------------ +# TEA_ADD_LIBS -- +# +# Specify one or more libraries. Users should check for +# the right platform before adding to their list. +# +# Arguments: +# one or more file names +# +# Results: +# +# Defines and substs the following vars: +# PKG_LIBS +#------------------------------------------------------------------------ +AC_DEFUN(TEA_ADD_LIBS, [ + vars="$@" + for i in $vars; do + PKG_LIBS="$PKG_LIBS $i" + done + AC_SUBST(PKG_LIBS) +]) + +#------------------------------------------------------------------------ +# TEA_ADD_CFLAGS -- +# +# Specify one or more CFLAGS. Users should check for +# the right platform before adding to their list. +# +# Arguments: +# one or more file names +# +# Results: +# +# Defines and substs the following vars: +# PKG_CFLAGS +#------------------------------------------------------------------------ +AC_DEFUN(TEA_ADD_CFLAGS, [ + PKG_CFLAGS="$PKG_CFLAGS $@" + AC_SUBST(PKG_CFLAGS) +]) + +#------------------------------------------------------------------------ +# TEA_PREFIX -- +# +# Handle the --prefix=... option by defaulting to what Tcl gave +# +# Arguments: +# none +# +# Results: +# +# If --prefix or --exec-prefix was not specified, $prefix and +# $exec_prefix will be set to the values given to Tcl when it was +# configured. +#------------------------------------------------------------------------ +AC_DEFUN(TEA_PREFIX, [ + # Should be AC_MSG_NOTICE, but that requires autoconf 2.50 + if test "${prefix}" = "NONE"; then + prefix_default=yes + if test x"${TCL_PREFIX}" != x; then + AC_MSG_WARN([--prefix defaulting to TCL_PREFIX ${TCL_PREFIX}]) + prefix=${TCL_PREFIX} + else + prefix=/usr/local + fi + fi + if test "${exec_prefix}" = "NONE" -a x"${prefix_default}" = x"yes" ; then + if test x"${TCL_EXEC_PREFIX}" != x; then + AC_MSG_WARN([--exec-prefix defaulting to TCL_EXEC_PREFIX ${TCL_EXEC_PREFIX}]) + exec_prefix=${TCL_EXEC_PREFIX} + else + exec_prefix=$prefix + fi + fi +]) + +#------------------------------------------------------------------------ +# TEA_SETUP_COMPILER_CC -- +# +# Do compiler checks the way we want. This is just a replacement +# for AC_PROG_CC in TEA configure.in files to make them cleaner. +# +# Arguments: +# none +# +# Results: +# +# Sets up CC var and other standard bits we need to make executables. +#------------------------------------------------------------------------ +AC_DEFUN(TEA_SETUP_COMPILER_CC, [ + # Don't put any macros that use the compiler (e.g. AC_TRY_COMPILE) + # in this macro, they need to go into TEA_SETUP_COMPILER instead. + + # If the user did not set CFLAGS, set it now to keep + # the AC_PROG_CC macro from adding "-g -O2". + if test "${CFLAGS+set}" != "set" ; then + CFLAGS="" + fi + + AC_PROG_CC + AC_PROG_CPP + + AC_PROG_INSTALL + + #-------------------------------------------------------------------- + # Checks to see if the make program sets the $MAKE variable. + #-------------------------------------------------------------------- + + AC_PROG_MAKE_SET + + #-------------------------------------------------------------------- + # Find ranlib + #-------------------------------------------------------------------- + + AC_PROG_RANLIB + + #-------------------------------------------------------------------- + # Determines the correct binary file extension (.o, .obj, .exe etc.) + #-------------------------------------------------------------------- + + AC_OBJEXT + AC_EXEEXT +]) + +#------------------------------------------------------------------------ +# TEA_SETUP_COMPILER -- +# +# Do compiler checks that use the compiler. This must go after +# TEA_SETUP_COMPILER_CC, which does the actual compiler check. +# +# Arguments: +# none +# +# Results: +# +# Sets up CC var and other standard bits we need to make executables. +#------------------------------------------------------------------------ +AC_DEFUN(TEA_SETUP_COMPILER, [ + # Any macros that use the compiler (e.g. AC_TRY_COMPILE) have to go here. + AC_REQUIRE([TEA_SETUP_COMPILER_CC]) + + #------------------------------------------------------------------------ + # If we're using GCC, see if the compiler understands -pipe. If so, use it. + # It makes compiling go faster. (This is only a performance feature.) + #------------------------------------------------------------------------ + + if test -z "$no_pipe" -a -n "$GCC"; then + AC_MSG_CHECKING([if the compiler understands -pipe]) + OLDCC="$CC" + CC="$CC -pipe" + AC_TRY_COMPILE(,, AC_MSG_RESULT([yes]), CC="$OLDCC" + AC_MSG_RESULT([no])) + fi + + #-------------------------------------------------------------------- + # Common compiler flag setup + #-------------------------------------------------------------------- + + TEA_TCL_EARLY_FLAGS + TEA_TCL_64BIT_FLAGS + AC_C_BIGENDIAN + if test "${TEA_PLATFORM}" = "unix" ; then + TEA_TCL_LINK_LIBS + TEA_MISSING_POSIX_HEADERS + # Let the user call this, because if it triggers, they will + # need a compat/strtod.c that is correct. Users can also + # use Tcl_GetDouble(FromObj) instead. + #TEA_BUGGY_STRTOD + fi +]) + +#------------------------------------------------------------------------ +# TEA_MAKE_LIB -- +# +# Generate a line that can be used to build a shared/unshared library +# in a platform independent manner. +# +# Arguments: +# none +# +# Requires: +# +# Results: +# +# Defines the following vars: +# CFLAGS - Done late here to note disturb other AC macros +# MAKE_LIB - Command to execute to build the Tcl library; +# differs depending on whether or not Tcl is being +# compiled as a shared library. +# MAKE_SHARED_LIB Makefile rule for building a shared library +# MAKE_STATIC_LIB Makefile rule for building a static library +# MAKE_STUB_LIB Makefile rule for building a stub library +#------------------------------------------------------------------------ + +AC_DEFUN(TEA_MAKE_LIB, [ + if test "${TEA_PLATFORM}" = "windows" -a "$GCC" != "yes"; then + MAKE_STATIC_LIB="\${STLIB_LD} -out:\[$]@ \$(PKG_OBJECTS)" + MAKE_SHARED_LIB="\${SHLIB_LD} \${SHLIB_LD_FLAGS} \${SHLIB_LD_LIBS} \$(LDFLAGS) -out:\[$]@ \$(PKG_OBJECTS)" + MAKE_STUB_LIB="\${STLIB_LD} -out:\[$]@ \$(PKG_STUB_OBJECTS)" + else + MAKE_STATIC_LIB="\${STLIB_LD} \[$]@ \$(PKG_OBJECTS)" + MAKE_SHARED_LIB="\${SHLIB_LD} -o \[$]@ \$(PKG_OBJECTS) \${SHLIB_LD_FLAGS} \${SHLIB_LD_LIBS}" + MAKE_STUB_LIB="\${STLIB_LD} \[$]@ \$(PKG_STUB_OBJECTS)" + fi + + if test "${SHARED_BUILD}" = "1" ; then + MAKE_LIB="${MAKE_SHARED_LIB} " + else + MAKE_LIB="${MAKE_STATIC_LIB} " + fi + + #-------------------------------------------------------------------- + # Shared libraries and static libraries have different names. + # Use the double eval to make sure the ${DBGX} in the suffix is + # substituted. + #-------------------------------------------------------------------- + + RANLIB_STUB="${RANLIB}" + if test "${TEA_PLATFORM}" = "windows" ; then + if test "${SHARED_BUILD}" = "1" ; then + # We force the unresolved linking of symbols that are really in + # the private libraries of Tcl and Tk. + SHLIB_LD_LIBS="${SHLIB_LD_LIBS} \"`${CYGPATH} ${TCL_BIN_DIR}/${TCL_STUB_LIB_FILE}`\"" + if test x"${TK_BIN_DIR}" != x ; then + SHLIB_LD_LIBS="${SHLIB_LD_LIBS} \"`${CYGPATH} ${TK_BIN_DIR}/${TK_STUB_LIB_FILE}`\"" + fi + eval eval "PKG_LIB_FILE=${PACKAGE_NAME}${SHARED_LIB_SUFFIX}" + RANLIB=: + else + eval eval "PKG_LIB_FILE=${PACKAGE_NAME}${UNSHARED_LIB_SUFFIX}" + fi + # Some packages build there own stubs libraries + eval eval "PKG_STUB_LIB_FILE=${PACKAGE_NAME}stub${UNSHARED_LIB_SUFFIX}" + else + if test "${SHARED_BUILD}" = "1" ; then + SHLIB_LD_LIBS="${SHLIB_LD_LIBS} ${TCL_STUB_LIB_SPEC}" + if test x"${TK_BIN_DIR}" != x ; then + SHLIB_LD_LIBS="${SHLIB_LD_LIBS} ${TK_STUB_LIB_SPEC}" + fi + eval eval "PKG_LIB_FILE=lib${PACKAGE_NAME}${SHARED_LIB_SUFFIX}" + RANLIB=: + else + eval eval "PKG_LIB_FILE=lib${PACKAGE_NAME}${UNSHARED_LIB_SUFFIX}" + fi + # Some packages build there own stubs libraries + eval eval "PKG_STUB_LIB_FILE=lib${PACKAGE_NAME}stub${UNSHARED_LIB_SUFFIX}" + fi + + # These are escaped so that only CFLAGS is picked up at configure time. + # The other values will be substituted at make time. + CFLAGS="${CFLAGS} \${CFLAGS_DEFAULT} \${CFLAGS_WARNING}" + if test "${SHARED_BUILD}" = "1" ; then + CFLAGS="${CFLAGS} \${SHLIB_CFLAGS}" + fi + + AC_SUBST(MAKE_LIB) + AC_SUBST(MAKE_SHARED_LIB) + AC_SUBST(MAKE_STATIC_LIB) + AC_SUBST(MAKE_STUB_LIB) + AC_SUBST(RANLIB_STUB) +]) + +#------------------------------------------------------------------------ +# TEA_LIB_SPEC -- +# +# Compute the name of an existing object library located in libdir +# from the given base name and produce the appropriate linker flags. +# +# Arguments: +# basename The base name of the library without version +# numbers, extensions, or "lib" prefixes. +# extra_dir Extra directory in which to search for the +# library. This location is used first, then +# $prefix/$exec-prefix, then some defaults. +# +# Requires: +# TEA_INIT and TEA_PREFIX must be called first. +# +# Results: +# +# Defines the following vars: +# ${basename}_LIB_NAME The computed library name. +# ${basename}_LIB_SPEC The computed linker flags. +#------------------------------------------------------------------------ + +AC_DEFUN(TEA_LIB_SPEC, [ + AC_MSG_CHECKING([for $1 library]) + + # Look in exec-prefix for the library (defined by TEA_PREFIX). + + tea_lib_name_dir="${exec_prefix}/lib" + + # Or in a user-specified location. + + if test x"$2" != x ; then + tea_extra_lib_dir=$2 + else + tea_extra_lib_dir=NONE + fi + + for i in \ + `ls -dr ${tea_extra_lib_dir}/$1[[0-9]]*.lib 2>/dev/null ` \ + `ls -dr ${tea_extra_lib_dir}/lib$1[[0-9]]* 2>/dev/null ` \ + `ls -dr ${tea_lib_name_dir}/$1[[0-9]]*.lib 2>/dev/null ` \ + `ls -dr ${tea_lib_name_dir}/lib$1[[0-9]]* 2>/dev/null ` \ + `ls -dr /usr/lib/$1[[0-9]]*.lib 2>/dev/null ` \ + `ls -dr /usr/lib/lib$1[[0-9]]* 2>/dev/null ` \ + `ls -dr /usr/local/lib/$1[[0-9]]*.lib 2>/dev/null ` \ + `ls -dr /usr/local/lib/lib$1[[0-9]]* 2>/dev/null ` ; do + if test -f "$i" ; then + tea_lib_name_dir=`dirname $i` + $1_LIB_NAME=`basename $i` + $1_LIB_PATH_NAME=$i + break + fi + done + + if test "${TEA_PLATFORM}" = "windows"; then + $1_LIB_SPEC=\"`${CYGPATH} ${$1_LIB_PATH_NAME} 2>/dev/null`\" + else + # Strip off the leading "lib" and trailing ".a" or ".so" + + tea_lib_name_lib=`echo ${$1_LIB_NAME}|sed -e 's/^lib//' -e 's/\.[[^.]]*$//' -e 's/\.so.*//'` + $1_LIB_SPEC="-L${tea_lib_name_dir} -l${tea_lib_name_lib}" + fi + + if test "x${$1_LIB_NAME}" = x ; then + AC_MSG_ERROR([not found]) + else + AC_MSG_RESULT([${$1_LIB_SPEC}]) + fi +]) + +#------------------------------------------------------------------------ +# TEA_PRIVATE_TCL_HEADERS -- +# +# Locate the private Tcl include files +# +# Arguments: +# +# Requires: +# TCL_SRC_DIR Assumes that TEA_LOAD_TCLCONFIG has +# already been called. +# +# Results: +# +# Substs the following vars: +# TCL_TOP_DIR_NATIVE +# TCL_GENERIC_DIR_NATIVE +# TCL_UNIX_DIR_NATIVE +# TCL_WIN_DIR_NATIVE +# TCL_BMAP_DIR_NATIVE +# TCL_TOOL_DIR_NATIVE +# TCL_PLATFORM_DIR_NATIVE +# TCL_BIN_DIR_NATIVE +# TCL_INCLUDES +#------------------------------------------------------------------------ + +AC_DEFUN(TEA_PRIVATE_TCL_HEADERS, [ + AC_MSG_CHECKING([for Tcl private include files]) + + if test "${TEA_PLATFORM}" = "windows"; then + TCL_TOP_DIR_NATIVE=\"`${CYGPATH} ${TCL_SRC_DIR}`\" + TCL_GENERIC_DIR_NATIVE=\"`${CYGPATH} ${TCL_SRC_DIR}/generic`\" + TCL_UNIX_DIR_NATIVE=\"`${CYGPATH} ${TCL_SRC_DIR}/unix`\" + TCL_WIN_DIR_NATIVE=\"`${CYGPATH} ${TCL_SRC_DIR}/win`\" + TCL_BMAP_DIR_NATIVE=\"`${CYGPATH} ${TCL_SRC_DIR}/bitmaps`\" + TCL_TOOL_DIR_NATIVE=\"`${CYGPATH} ${TCL_SRC_DIR}/tools`\" + TCL_COMPAT_DIR_NATIVE=\"`${CYGPATH} ${TCL_SRC_DIR}/compat`\" + TCL_PLATFORM_DIR_NATIVE=${TCL_WIN_DIR_NATIVE} + + TCL_INCLUDES="-I${TCL_GENERIC_DIR_NATIVE} -I${TCL_PLATFORM_DIR_NATIVE}" + else + TCL_TOP_DIR_NATIVE='$(TCL_SRC_DIR)' + TCL_GENERIC_DIR_NATIVE='${TCL_TOP_DIR_NATIVE}/generic' + TCL_UNIX_DIR_NATIVE='${TCL_TOP_DIR_NATIVE}/unix' + TCL_WIN_DIR_NATIVE='${TCL_TOP_DIR_NATIVE}/win' + TCL_BMAP_DIR_NATIVE='${TCL_TOP_DIR_NATIVE}/bitmaps' + TCL_TOOL_DIR_NATIVE='${TCL_TOP_DIR_NATIVE}/tools' + TCL_COMPAT_DIR_NATIVE='${TCL_TOP_DIR_NATIVE}/compat' + TCL_PLATFORM_DIR_NATIVE=${TCL_UNIX_DIR_NATIVE} + + # substitute these in "relaxed" so that TCL_INCLUDES still works + # without requiring the other vars to be defined in the Makefile + eval "TCL_INCLUDES=\"-I${TCL_GENERIC_DIR_NATIVE} -I${TCL_PLATFORM_DIR_NATIVE}\"" + fi + + AC_SUBST(TCL_TOP_DIR_NATIVE) + AC_SUBST(TCL_GENERIC_DIR_NATIVE) + AC_SUBST(TCL_UNIX_DIR_NATIVE) + AC_SUBST(TCL_WIN_DIR_NATIVE) + AC_SUBST(TCL_BMAP_DIR_NATIVE) + AC_SUBST(TCL_TOOL_DIR_NATIVE) + AC_SUBST(TCL_PLATFORM_DIR_NATIVE) + + AC_SUBST(TCL_INCLUDES) + AC_MSG_RESULT([Using srcdir found in tclConfig.sh: ${TCL_SRC_DIR}]) +]) + +#------------------------------------------------------------------------ +# TEA_PUBLIC_TCL_HEADERS -- +# +# Locate the installed public Tcl header files +# +# Arguments: +# None. +# +# Requires: +# CYGPATH must be set +# +# Results: +# +# Adds a --with-tclinclude switch to configure. +# Result is cached. +# +# Substs the following vars: +# TCL_INCLUDES +#------------------------------------------------------------------------ + +AC_DEFUN(TEA_PUBLIC_TCL_HEADERS, [ + AC_MSG_CHECKING([for Tcl public headers]) + + AC_ARG_WITH(tclinclude, [ --with-tclinclude directory containing the public Tcl header files], with_tclinclude=${withval}) + + AC_CACHE_VAL(ac_cv_c_tclh, [ + # Use the value from --with-tclinclude, if it was given + + if test x"${with_tclinclude}" != x ; then + if test -f "${with_tclinclude}/tcl.h" ; then + ac_cv_c_tclh=${with_tclinclude} + else + AC_MSG_ERROR([${with_tclinclude} directory does not contain tcl.h]) + fi + else + # Check order: pkg --prefix location, Tcl's --prefix location, + # directory of tclConfig.sh, and Tcl source directory. + # Looking in the source dir is not ideal, but OK. + + eval "temp_includedir=${includedir}" + list="`ls -d ${temp_includedir} 2>/dev/null` \ + `ls -d ${TCL_PREFIX}/include 2>/dev/null` \ + `ls -d ${TCL_BIN_DIR}/../include 2>/dev/null` \ + `ls -d ${TCL_SRC_DIR}/generic 2>/dev/null`" + if test "${TEA_PLATFORM}" != "windows" -o "$GCC" = "yes"; then + list="$list /usr/local/include /usr/include" + fi + for i in $list ; do + if test -f "$i/tcl.h" ; then + ac_cv_c_tclh=$i + break + fi + done + fi + ]) + + # Print a message based on how we determined the include path + + if test x"${ac_cv_c_tclh}" = x ; then + AC_MSG_ERROR([tcl.h not found. Please specify its location with --with-tclinclude]) + else + AC_MSG_RESULT([${ac_cv_c_tclh}]) + fi + + # Convert to a native path and substitute into the output files. + + INCLUDE_DIR_NATIVE=`${CYGPATH} ${ac_cv_c_tclh}` + + TCL_INCLUDES=-I\"${INCLUDE_DIR_NATIVE}\" + + AC_SUBST(TCL_INCLUDES) +]) + +#------------------------------------------------------------------------ +# TEA_PRIVATE_TK_HEADERS -- +# +# Locate the private Tk include files +# +# Arguments: +# +# Requires: +# TK_SRC_DIR Assumes that TEA_LOAD_TKCONFIG has +# already been called. +# +# Results: +# +# Substs the following vars: +# TK_INCLUDES +#------------------------------------------------------------------------ + +AC_DEFUN(TEA_PRIVATE_TK_HEADERS, [ + AC_MSG_CHECKING([for Tk private include files]) + + if test "${TEA_PLATFORM}" = "windows"; then + TK_TOP_DIR_NATIVE=\"`${CYGPATH} ${TK_SRC_DIR}`\" + TK_UNIX_DIR_NATIVE=\"`${CYGPATH} ${TK_SRC_DIR}/unix`\" + TK_WIN_DIR_NATIVE=\"`${CYGPATH} ${TK_SRC_DIR}/win`\" + TK_GENERIC_DIR_NATIVE=\"`${CYGPATH} ${TK_SRC_DIR}/generic`\" + TK_XLIB_DIR_NATIVE=\"`${CYGPATH} ${TK_SRC_DIR}/xlib`\" + TK_PLATFORM_DIR_NATIVE=${TK_WIN_DIR_NATIVE} + + TK_INCLUDES="-I${TK_GENERIC_DIR_NATIVE} -I${TK_PLATFORM_DIR_NATIVE} -I${TK_XLIB_DIR_NATIVE}" + else + TK_TOP_DIR_NATIVE='${TK_SRC_DIR}' + TK_GENERIC_DIR_NATIVE='${TK_TOP_DIR_NATIVE}/generic' + TK_UNIX_DIR_NATIVE='${TK_TOP_DIR_NATIVE}/unix' + TK_WIN_DIR_NATIVE='${TK_TOP_DIR_NATIVE}/win' + TK_PLATFORM_DIR_NATIVE=${TK_UNIX_DIR_NATIVE} + + # substitute these in "relaxed" so that TK_INCLUDES still works + # without requiring the other vars to be defined in the Makefile + eval "TK_INCLUDES=\"-I${TK_GENERIC_DIR_NATIVE} -I${TK_PLATFORM_DIR_NATIVE}\"" + fi + + AC_SUBST(TK_TOP_DIR_NATIVE) + AC_SUBST(TK_UNIX_DIR_NATIVE) + AC_SUBST(TK_WIN_DIR_NATIVE) + AC_SUBST(TK_GENERIC_DIR_NATIVE) + AC_SUBST(TK_XLIB_DIR_NATIVE) + AC_SUBST(TK_PLATFORM_DIR_NATIVE) + + AC_SUBST(TK_INCLUDES) + AC_MSG_RESULT([Using srcdir found in tkConfig.sh: ${TK_SRC_DIR}]) +]) + +#------------------------------------------------------------------------ +# TEA_PUBLIC_TK_HEADERS -- +# +# Locate the installed public Tk header files +# +# Arguments: +# None. +# +# Requires: +# CYGPATH must be set +# +# Results: +# +# Adds a --with-tkinclude switch to configure. +# Result is cached. +# +# Substs the following vars: +# TK_INCLUDES +#------------------------------------------------------------------------ + +AC_DEFUN(TEA_PUBLIC_TK_HEADERS, [ + AC_MSG_CHECKING([for Tk public headers]) + + AC_ARG_WITH(tkinclude, [ --with-tkinclude directory containing the public Tk header files.], with_tkinclude=${withval}) + + AC_CACHE_VAL(ac_cv_c_tkh, [ + # Use the value from --with-tkinclude, if it was given + + if test x"${with_tkinclude}" != x ; then + if test -f "${with_tkinclude}/tk.h" ; then + ac_cv_c_tkh=${with_tkinclude} + else + AC_MSG_ERROR([${with_tkinclude} directory does not contain tk.h]) + fi + else + # Check order: pkg --prefix location, Tcl's --prefix location, + # directory of tclConfig.sh, and Tcl source directory. + # Looking in the source dir is not ideal, but OK. + + eval "temp_includedir=${includedir}" + list="`ls -d ${temp_includedir} 2>/dev/null` \ + `ls -d ${TK_PREFIX}/include 2>/dev/null` \ + `ls -d ${TCL_PREFIX}/include 2>/dev/null` \ + `ls -d ${TCL_BIN_DIR}/../include 2>/dev/null` \ + `ls -d ${TK_SRC_DIR}/generic 2>/dev/null`" + if test "${TEA_PLATFORM}" != "windows" -o "$GCC" = "yes"; then + list="$list /usr/local/include /usr/include" + fi + for i in $list ; do + if test -f "$i/tk.h" ; then + ac_cv_c_tkh=$i + break + fi + done + fi + ]) + + # Print a message based on how we determined the include path + + if test x"${ac_cv_c_tkh}" = x ; then + AC_MSG_ERROR([tk.h not found. Please specify its location with --with-tkinclude]) + else + AC_MSG_RESULT([${ac_cv_c_tkh}]) + fi + + # Convert to a native path and substitute into the output files. + + INCLUDE_DIR_NATIVE=`${CYGPATH} ${ac_cv_c_tkh}` + + TK_INCLUDES=-I\"${INCLUDE_DIR_NATIVE}\" + + AC_SUBST(TK_INCLUDES) + + if test "${TEA_PLATFORM}" = "windows" ; then + # On Windows, we need the X compat headers + AC_MSG_CHECKING([for X11 header files]) + if test ! -r "${INCLUDE_DIR_NATIVE}/X11/Xlib.h"; then + INCLUDE_DIR_NATIVE="`${CYGPATH} ${TK_SRC_DIR}/xlib`" + TK_XINCLUDES=-I\"${INCLUDE_DIR_NATIVE}\" + AC_SUBST(TK_XINCLUDES) + fi + AC_MSG_RESULT([${INCLUDE_DIR_NATIVE}]) + fi +]) + +#------------------------------------------------------------------------ +# TEA_PROG_TCLSH +# Locate a tclsh shell in the following directories: +# ${TCL_BIN_DIR} ${TCL_BIN_DIR}/../bin +# ${exec_prefix}/bin ${prefix}/bin +# ${PATH} +# +# Arguments +# none +# +# Results +# Subst's the following values: +# TCLSH_PROG +#------------------------------------------------------------------------ + +AC_DEFUN(TEA_PROG_TCLSH, [ + AC_MSG_CHECKING([for tclsh]) + + AC_CACHE_VAL(ac_cv_path_tclsh, [ + if test "x${CELIB_DIR}" != "x" ; then + # If CELIB_DIR is defined, assume Windows/CE target is requested + # which means target tclsh cannot be run (cross-compile) + search_path=`echo ${PATH} | sed -e 's/:/ /g'` + else + search_path=`echo ${TCL_BIN_DIR}:${TCL_BIN_DIR}/../bin:${exec_prefix}/bin:${prefix}/bin:${PATH} | sed -e 's/:/ /g'` + fi + for dir in $search_path ; do + for j in `ls -r $dir/tclsh[[8-9]]*${EXEEXT} 2> /dev/null` \ + `ls -r $dir/tclsh*${EXEEXT} 2> /dev/null` ; do + if test x"$ac_cv_path_tclsh" = x ; then + if test -f "$j" ; then + ac_cv_path_tclsh=$j + break + fi + fi + done + done + ]) + + if test -f "$ac_cv_path_tclsh" ; then + TCLSH_PROG=$ac_cv_path_tclsh + AC_MSG_RESULT([$TCLSH_PROG]) + else + AC_MSG_ERROR([No tclsh found in PATH: $search_path]) + fi + AC_SUBST(TCLSH_PROG) +]) + +#------------------------------------------------------------------------ +# TEA_PROG_WISH +# Locate a wish shell in the following directories: +# ${TK_BIN_DIR} ${TK_BIN_DIR}/../bin +# ${TCL_BIN_DIR} ${TCL_BIN_DIR}/../bin +# ${exec_prefix}/bin ${prefix}/bin +# ${PATH} +# +# Arguments +# none +# +# Results +# Subst's the following values: +# WISH_PROG +#------------------------------------------------------------------------ + +AC_DEFUN(TEA_PROG_WISH, [ + AC_MSG_CHECKING([for wish]) + + AC_CACHE_VAL(ac_cv_path_wish, [ + if test "x${CELIB_DIR}" != "x" ; then + # If CELIB_DIR is defined, assume Windows/CE target is requested + # which means target wish cannot be run (cross-compile) + search_path=`echo ${PATH} | sed -e 's/:/ /g'` + else + search_path=`echo ${TK_BIN_DIR}:${TK_BIN_DIR}/../bin:${TCL_BIN_DIR}:${TCL_BIN_DIR}/../bin:${exec_prefix}/bin:${prefix}/bin:${PATH} | sed -e 's/:/ /g'` + fi + for dir in $search_path ; do + for j in `ls -r $dir/wish[[8-9]]*${EXEEXT} 2> /dev/null` \ + `ls -r $dir/wish*${EXEEXT} 2> /dev/null` ; do + if test x"$ac_cv_path_wish" = x ; then + if test -f "$j" ; then + ac_cv_path_wish=$j + break + fi + fi + done + done + ]) + + if test -f "$ac_cv_path_wish" ; then + WISH_PROG=$ac_cv_path_wish + AC_MSG_RESULT([$WISH_PROG]) + else + AC_MSG_ERROR([No wish found in PATH: $search_path]) + fi + AC_SUBST(WISH_PROG) +]) + +#------------------------------------------------------------------------ +# TEA_PATH_CONFIG -- +# +# Locate the ${1}Config.sh file and perform a sanity check on +# the ${1} compile flags. These are used by packages like +# [incr Tk] that load *Config.sh files from more than Tcl and Tk. +# +# Arguments: +# none +# +# Results: +# +# Adds the following arguments to configure: +# --with-$1=... +# +# Defines the following vars: +# $1_BIN_DIR Full path to the directory containing +# the $1Config.sh file +#------------------------------------------------------------------------ + +AC_DEFUN(TEA_PATH_CONFIG, [ + # + # Ok, lets find the $1 configuration + # First, look for one uninstalled. + # the alternative search directory is invoked by --with-$1 + # + + if test x"${no_$1}" = x ; then + # we reset no_$1 in case something fails here + no_$1=true + AC_ARG_WITH($1, [ --with-$1 directory containing $1 configuration ($1Config.sh)], with_$1config=${withval}) + AC_MSG_CHECKING([for $1 configuration]) + AC_CACHE_VAL(ac_cv_c_$1config,[ + + # First check to see if --with-$1 was specified. + if test x"${with_$1config}" != x ; then + if test -f "${with_$1config}/$1Config.sh" ; then + ac_cv_c_$1config=`(cd ${with_$1config}; pwd)` + else + AC_MSG_ERROR([${with_$1config} directory doesn't contain $1Config.sh]) + fi + fi + + # then check for a private $1 installation + if test x"${ac_cv_c_$1config}" = x ; then + for i in \ + ../$1 \ + `ls -dr ../$1[[8-9]].[[0-9]]* 2>/dev/null` \ + ../../$1 \ + `ls -dr ../../$1[[8-9]].[[0-9]]* 2>/dev/null` \ + ../../../$1 \ + `ls -dr ../../../$1[[8-9]].[[0-9]]* 2>/dev/null` \ + ${srcdir}/../$1 \ + `ls -dr ${srcdir}/../$1[[8-9]].[[0-9]]* 2>/dev/null` \ + ; do + if test -f "$i/$1Config.sh" ; then + ac_cv_c_$1config=`(cd $i; pwd)` + break + fi + if test -f "$i/unix/$1Config.sh" ; then + ac_cv_c_$1config=`(cd $i/unix; pwd)` + break + fi + done + fi + + # check in a few common install locations + if test x"${ac_cv_c_$1config}" = x ; then + for i in `ls -d ${exec_prefix}/lib 2>/dev/null` \ + `ls -d ${prefix}/lib 2>/dev/null` \ + `ls -d /usr/local/lib 2>/dev/null` \ + `ls -d /usr/contrib/lib 2>/dev/null` \ + `ls -d /usr/lib 2>/dev/null` \ + ; do + if test -f "$i/$1Config.sh" ; then + ac_cv_c_$1config=`(cd $i; pwd)` + break + fi + done + fi + ]) + + if test x"${ac_cv_c_$1config}" = x ; then + $1_BIN_DIR="# no $1 configs found" + AC_MSG_WARN("Cannot find $1 configuration definitions") + exit 0 + else + no_$1= + $1_BIN_DIR=${ac_cv_c_$1config} + AC_MSG_RESULT([found $$1_BIN_DIR/$1Config.sh]) + fi + fi +]) + +#------------------------------------------------------------------------ +# TEA_LOAD_CONFIG -- +# +# Load the $1Config.sh file +# +# Arguments: +# +# Requires the following vars to be set: +# $1_BIN_DIR +# +# Results: +# +# Subst the following vars: +# $1_SRC_DIR +# $1_LIB_FILE +# $1_LIB_SPEC +# +#------------------------------------------------------------------------ + +AC_DEFUN(TEA_LOAD_CONFIG, [ + AC_MSG_CHECKING([for existence of ${$1_BIN_DIR}/$1Config.sh]) + + if test -f "${$1_BIN_DIR}/$1Config.sh" ; then + AC_MSG_RESULT([loading]) + . ${$1_BIN_DIR}/$1Config.sh + else + AC_MSG_RESULT([file not found]) + fi + + # + # If the $1_BIN_DIR is the build directory (not the install directory), + # then set the common variable name to the value of the build variables. + # For example, the variable $1_LIB_SPEC will be set to the value + # of $1_BUILD_LIB_SPEC. An extension should make use of $1_LIB_SPEC + # instead of $1_BUILD_LIB_SPEC since it will work with both an + # installed and uninstalled version of Tcl. + # + + if test -f ${$1_BIN_DIR}/Makefile ; then + AC_MSG_WARN([Found Makefile - using build library specs for $1]) + $1_LIB_SPEC=${$1_BUILD_LIB_SPEC} + $1_STUB_LIB_SPEC=${$1_BUILD_STUB_LIB_SPEC} + $1_STUB_LIB_PATH=${$1_BUILD_STUB_LIB_PATH} + fi + + AC_SUBST($1_VERSION) + AC_SUBST($1_SRC_DIR) + + AC_SUBST($1_LIB_FILE) + AC_SUBST($1_LIB_SPEC) + + AC_SUBST($1_STUB_LIB_FILE) + AC_SUBST($1_STUB_LIB_SPEC) + AC_SUBST($1_STUB_LIB_PATH) +]) + +#------------------------------------------------------------------------ +# TEA_PATH_CELIB -- +# +# Locate Keuchel's celib emulation layer for targeting Win/CE +# +# Arguments: +# none +# +# Results: +# +# Adds the following arguments to configure: +# --with-celib=... +# +# Defines the following vars: +# CELIB_DIR Full path to the directory containing +# the include and platform lib files +#------------------------------------------------------------------------ + +AC_DEFUN(TEA_PATH_CELIB, [ + # First, look for one uninstalled. + # the alternative search directory is invoked by --with-celib + + if test x"${no_celib}" = x ; then + # we reset no_celib in case something fails here + no_celib=true + AC_ARG_WITH(celib,[ --with-celib=DIR use Windows/CE support library from DIR], with_celibconfig=${withval}) + AC_MSG_CHECKING([for Windows/CE celib directory]) + AC_CACHE_VAL(ac_cv_c_celibconfig,[ + # First check to see if --with-celibconfig was specified. + if test x"${with_celibconfig}" != x ; then + if test -d "${with_celibconfig}/inc" ; then + ac_cv_c_celibconfig=`(cd ${with_celibconfig}; pwd)` + else + AC_MSG_ERROR([${with_celibconfig} directory doesn't contain inc directory]) + fi + fi + + # then check for a celib library + if test x"${ac_cv_c_celibconfig}" = x ; then + for i in \ + ../celib-palm-3.0 \ + ../celib \ + ../../celib-palm-3.0 \ + ../../celib \ + `ls -dr ../celib-*3.[[0-9]]* 2>/dev/null` \ + ${srcdir}/../celib-palm-3.0 \ + ${srcdir}/../celib \ + `ls -dr ${srcdir}/../celib-*3.[[0-9]]* 2>/dev/null` \ + ; do + if test -d "$i/inc" ; then + ac_cv_c_celibconfig=`(cd $i; pwd)` + break + fi + done + fi + ]) + if test x"${ac_cv_c_celibconfig}" = x ; then + CELIB_DIR="# no Celib configs found" + AC_MSG_ERROR([Cannot find celib support library directory]) + else + no_celib= + CELIB_DIR=${ac_cv_c_celibconfig} + AC_MSG_RESULT([found $CELIB_DIR]) + fi + fi +])