Index: ChangeLog ================================================================== --- ChangeLog +++ ChangeLog @@ -1,5 +1,13 @@ +2004-03-19 Jeff Hobbs + + * tls.c (Tls_Init): replaced older TEA config with newer + * config/* (removed): + * pkgIndex.tcl.in, strncasecmp.c (removed): + * Makefile.in, aclocal.m4, configure, configure.in: + * tclconfig/README.txt, tclconfig/install-sh, tclconfig/tcl.m4: + 2004-03-17 Dan Razzell * tlsX509.c: Add support for long serial numbers per RFC 3280. Format is now hexadecimal. [Request #915313] Index: Makefile.in ================================================================== --- Makefile.in +++ Makefile.in @@ -10,172 +10,140 @@ # All rights reserved. # # See the file "license.terms" for information on usage and redistribution # of this file, and for a DISCLAIMER OF ALL WARRANTIES. # -# RCS: @(#) $Id: Makefile.in,v 1.19 2004/02/04 04:02:17 razzell Exp $ +# RCS: @(#) $Id: Makefile.in,v 1.20 2004/03/19 21:05:16 hobbs Exp $ -lib_BINARIES=$(tls_LIB_FILE) -BINARIES=$(lib_BINARIES) - #======================================================================== # Enumerate the names of the source files included in this package. # This will be used when a dist target is added to the Makefile. #======================================================================== -tls_SOURCES = tls.c tlsIO.c tlsBIO.c \ - tlsX509.c fixstrtod.c -# strncasecmp.c -SOURCES = $(tls_SOURCES) - -tls_SCRIPT_FILES = tls.tcl - -#======================================================================== -# Enumerate the names of the object files included in this package. -# These objects are created and linked into the final library. -#======================================================================== - -tls_OBJECTS = tls.$(OBJEXT) tlsIO.$(OBJEXT) tlsBIO.$(OBJEXT) \ - tlsX509.$(OBJEXT) fixstrtod.$(OBJEXT) -# strncasecmp.$(OBJEXT) -OBJECTS = $(tls_OBJECTS) - -#======================================================================== -# The substitution of "tls_LIB_FILE" into the variable name below -# allows us to refer to the objects for the library without knowing the name -# of the library in advance. It also lets us use the "$@" variable in -# the rule for building the library, so we can refer to both the list of -# objects and the library itself in a platform-independent manner. -#======================================================================== - -tls_LIB_FILE = @tls_LIB_FILE@ -$(tls_LIB_FILE)_OBJECTS = $(tls_OBJECTS) +PKG_SOURCES = tls.c tlsIO.c tlsBIO.c tlsX509.c fixstrtod.c +PKG_OBJECTS = tls.$(OBJEXT) tlsIO.$(OBJEXT) tlsBIO.$(OBJEXT) \ + tlsX509.$(OBJEXT) fixstrtod.$(OBJEXT) + +#======================================================================== +# RUNTIME_SOURCES identifies Tcl runtime files that are associated with +# this package that need to be installed, if any. +#======================================================================== + +PKG_TCL_SOURCES = tls.tcl #======================================================================== # This is a list of header files to be installed #======================================================================== -GENERIC_HDRS= \ - $(srcdir)/tls.h +PKG_HEADERS = $(srcdir)/tls.h #======================================================================== # Variables and AC_SUBST cases added for tls. #======================================================================== -SSL_DIR = @SSL_DIR@ -SSL_LIB_DIR = @SSL_LIB_DIR@ -SSL_INCLUDE_DIR = @SSL_INCLUDE_DIR@ -SSL_INCLUDE_DIR_NATIVE = @SSL_INCLUDE_DIR_NATIVE@ -SSL_INCLUDES = -I$(SSL_INCLUDE_DIR_NATIVE) - - -#======================================================================== -# This is boilerplate from the sample tcl extension Makefile.in: -# Nothing of the variables below this line need to be changed. Please -# check the TARGETS section below to make sure the make targets are -# correct. -#======================================================================== - -SHELL = @SHELL@ - -srcdir = @srcdir@ -top_srcdir = @top_srcdir@ -prefix = @prefix@ -exec_prefix = @exec_prefix@ - -bindir = @bindir@ -sbindir = @sbindir@ -libexecdir = @libexecdir@ -datadir = @datadir@ -sysconfdir = @sysconfdir@ -sharedstatedir = @sharedstatedir@ -localstatedir = @localstatedir@ -libdir = @libdir@ -infodir = @infodir@ -mandir = @mandir@ -includedir = @includedir@ -oldincludedir = /usr/include - -DESTDIR = -RELPATH = @RELPATH@ - -pkgdatadir = $(datadir)/@PACKAGE@@VERSION@ -pkglibdir = $(libdir)/@PACKAGE@@VERSION@ -pkgincludedir = $(includedir)/@PACKAGE@@VERSION@ - -top_builddir = . - -INSTALL = @INSTALL@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_FLAG = -transform = @program_transform_name@ - -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : - -PACKAGE = @PACKAGE@ -VERSION = @VERSION@ -CC = @CC@ -CFLAGS_DEBUG = @CFLAGS_DEBUG@ -CFLAGS_DEFAULT = @CFLAGS_DEFAULT@ -CFLAGS_OPTIMIZE = @CFLAGS_OPTIMIZE@ -CLEANFILES = @CLEANFILES@ -EXEEXT = @EXEEXT@ -LDFLAGS_DEBUG = @LDFLAGS_DEBUG@ -LDFLAGS_DEFAULT = @LDFLAGS_DEFAULT@ -LDFLAGS_OPTIMIZE = @LDFLAGS_OPTIMIZE@ -MAKE_LIB = @MAKE_LIB@ -MAKE_SHARED_LIB = @MAKE_SHARED_LIB@ -MAKE_STATIC_LIB = @MAKE_STATIC_LIB@ -OBJEXT = @OBJEXT@ -RANLIB = @RANLIB@ -SHLIB_CFLAGS = @SHLIB_CFLAGS@ -SHLIB_LD = @SHLIB_LD@ -SHLIB_LDFLAGS = @SHLIB_LDFLAGS@ -SHLIB_LD_LIBS = @SHLIB_LD_LIBS@ -STLIB_LD = @STLIB_LD@ -TCL_BIN_DIR = @TCL_BIN_DIR@ -TCL_DEFS = @TCL_DEFS@ -TCL_EXTRA_CFLAGS = @TCL_EXTRA_CFLAGS@ -TCL_LD_FLAGS = @TCL_LD_FLAGS@ -TCL_LIBS = @TCL_LIBS@ -TCL_SHLIB_LD_LIBS = @TCL_SHLIB_LD_LIBS@ -TCL_SRC_DIR = @TCL_SRC_DIR@ -TCL_DBGX = @TCL_DBGX@ -TCL_STUB_LIB_FILE = @TCL_STUB_LIB_FILE@ -TCL_STUB_LIB_SPEC = @TCL_STUB_LIB_SPEC@ -TCLSH_PROG = @TCLSH_PROG@ - -AUTOCONF = autoconf - -LDFLAGS = $(LDFLAGS_DEFAULT) - -INCLUDES = @TCL_INCLUDES@ $(SSL_INCLUDES) - -EXTRA_CFLAGS = $(TCL_DEFS) $(PROTO_FLAGS) $(SECURITY_FLAGS) $(MEM_DEBUG_FLAGS) $(KEYSYM_FLAGS) $(NO_DEPRECATED_FLAGS) - -DEFS = @DEFS@ $(EXTRA_CFLAGS) - -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -CONFIGDIR = @CONFIGDIR@ -mkinstalldirs = $(SHELL) $(CONFIGDIR)/mkinstalldirs -CONFIG_CLEAN_FILES = - -CPPFLAGS = @CPPFLAGS@ -LIBS = @LIBS@ -AR = ar -CFLAGS = @CFLAGS@ -COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -CCLD = $(CC) -LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@ +SSL_DIR = @SSL_DIR@ +SSL_LIB_DIR = @SSL_LIB_DIR@ +SSL_INCLUDE_DIR = @SSL_INCLUDE_DIR@ +SSL_INCLUDE_DIR_NATIVE = @SSL_INCLUDE_DIR_NATIVE@ +SSL_INCLUDES = -I$(SSL_INCLUDE_DIR_NATIVE) + +#======================================================================== +# "PKG_LIB_FILE" refers to the library (dynamic or static as per +# configuration options) composed of the named objects. +#======================================================================== + +PKG_LIB_FILE = @PKG_LIB_FILE@ +PKG_STUB_LIB_FILE = @PKG_STUB_LIB_FILE@ + +lib_BINARIES = $(PKG_LIB_FILE) +BINARIES = $(lib_BINARIES) + +SHELL = @SHELL@ + +srcdir = @srcdir@ +prefix = @prefix@ +exec_prefix = @exec_prefix@ + +bindir = @bindir@ +libdir = @libdir@ +datadir = @datadir@ +mandir = @mandir@ +includedir = @includedir@ + +DESTDIR = + +PKG_DIR = $(PACKAGE_NAME)$(PACKAGE_VERSION) +pkgdatadir = $(datadir)/$(PKG_DIR) +pkglibdir = $(libdir)/$(PKG_DIR) +pkgincludedir = $(includedir)/$(PKG_DIR) + +top_builddir = . + +INSTALL = @INSTALL@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ + +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +CC = @CC@ +CFLAGS_DEFAULT = @CFLAGS_DEFAULT@ +CFLAGS_WARNING = @CFLAGS_WARNING@ +CLEANFILES = @CLEANFILES@ +EXEEXT = @EXEEXT@ +LDFLAGS_DEFAULT = @LDFLAGS_DEFAULT@ +MAKE_LIB = @MAKE_LIB@ +MAKE_SHARED_LIB = @MAKE_SHARED_LIB@ +MAKE_STATIC_LIB = @MAKE_STATIC_LIB@ +MAKE_STUB_LIB = @MAKE_STUB_LIB@ +OBJEXT = @OBJEXT@ +RANLIB = @RANLIB@ +RANLIB_STUB = @RANLIB_STUB@ +SHLIB_CFLAGS = @SHLIB_CFLAGS@ +SHLIB_LD = @SHLIB_LD@ +SHLIB_LD_FLAGS = @SHLIB_LD_FLAGS@ +SHLIB_LD_LIBS = @SHLIB_LD_LIBS@ +STLIB_LD = @STLIB_LD@ +TCL_DEFS = @TCL_DEFS@ +TCL_BIN_DIR = @TCL_BIN_DIR@ +TCL_SRC_DIR = @TCL_SRC_DIR@ +# This is necessary for packages that use private Tcl headers +#TCL_TOP_DIR_NATIVE = @TCL_TOP_DIR_NATIVE@ +# Not used, but retained for reference of what libs Tcl required +TCL_LIBS = @TCL_LIBS@ + +#======================================================================== +# TCLLIBPATH seeds the auto_path in Tcl's init.tcl so we can test our +# package without installing. The other environment variables allow us +# to test against an uninstalled Tcl. Add special env vars that you +# require for testing here (like TCLX_LIBRARY). +#======================================================================== + +EXTRA_PATH = $(top_builddir):$(TCL_BIN_DIR) +TCLSH_ENV = TCL_LIBRARY=`@CYGPATH@ $(TCL_SRC_DIR)/library` \ + @LD_LIBRARY_PATH_VAR@="$(EXTRA_PATH):$(@LD_LIBRARY_PATH_VAR@)" \ + PATH="$(EXTRA_PATH):$(PATH)" \ + TCLLIBPATH="$(top_builddir)" +TCLSH_PROG = @TCLSH_PROG@ +TCLSH = $(TCLSH_ENV) $(TCLSH_PROG) +SHARED_BUILD = @SHARED_BUILD@ + +INCLUDES = @TCL_INCLUDES@ @PKG_INCLUDES@ $(SSL_INCLUDES) + +EXTRA_CFLAGS = @EXTRA_CFLAGS@ @PKG_CFLAGS@ + +#DEFS = $(TCL_DEFS) @DEFS@ $(EXTRA_CFLAGS) +DEFS = @DEFS@ $(EXTRA_CFLAGS) + +CONFIG_CLEAN_FILES = Makefile + +CPPFLAGS = @CPPFLAGS@ +LIBS = @PKG_LIBS@ @LIBS@ +AR = ar +CFLAGS = @CFLAGS@ +COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) #======================================================================== # Start of user-definable TARGETS section #======================================================================== @@ -194,113 +162,111 @@ # shared/static libraries, and any other platform-dependent files. # The list of targets to build for "binaries:" is specified at the top # of the Makefile, in the "BINARIES" variable. #======================================================================== -binaries: $(BINARIES) +binaries: $(BINARIES) pkgIndex.tcl -libraries: $(tls_SCRIPT_FILES) +libraries: $(PKG_TCL_SOURCES) doc: install: all install-binaries install-libraries install-doc install-binaries: binaries install-lib-binaries install-bin-binaries - sed -e "s#\@RELPATH\@#$(RELPATH)#" \ - -e "s#\@tls_LIB_FILE\@#$(tls_LIB_FILE)#" \ - < $(srcdir)/pkgIndex.tcl.in > pkgIndex.tcl - $(INSTALL_DATA) pkgIndex.tcl $(pkglibdir) + if test "x$(SHARED_BUILD)" = "x1"; then \ + $(INSTALL_DATA) pkgIndex.tcl $(DESTDIR)$(pkglibdir); \ + fi #======================================================================== # This rule installs platform-independent files, such as header files. #======================================================================== install-libraries: libraries - $(mkinstalldirs) $(includedir) - @echo "Installing header files in $(includedir)" - @for i in $(GENERIC_HDRS) ; do \ + @mkdir -p $(DESTDIR)$(includedir) + @echo "Installing header files in $(DESTDIR)$(includedir)" + @for i in $(PKG_HEADERS) ; do \ echo "Installing $$i" ; \ - $(INSTALL_DATA) $$i $(includedir) ; \ + $(INSTALL_DATA) $$i $(DESTDIR)$(includedir) ; \ done; - $(INSTALL_DATA) $(srcdir)/tls.tcl $(pkglibdir) #======================================================================== # Install documentation. Unix manpages should go in the $(mandir) # directory. #======================================================================== install-doc: doc -# $(mkinstalldirs) $(mandir)/man1 -# $(mkinstalldirs) $(mandir)/man3 -# $(mkinstalldirs) $(mandir)/mann -# @echo "Installing documentation in $(mandir)" -# @for i in $(srcdir)/*.n; \ -# do \ -# echo "Installing $$i"; \ -# rm -f $(mandir)/mann/$$i; \ -# $(INSTALL_DATA) $$i $(mandir)/mann ; \ -# done +# @mkdir -p $(DESTDIR)$(mandir)/mann +# @echo "Installing documentation in $(DESTDIR)$(mandir)" +# @for i in $(srcdir)/doc/*.n; do \ +# echo "Installing $$i"; \ +# rm -f $(DESTDIR)$(mandir)/mann/`basename $$i`; \ +# $(INSTALL_DATA) $$i $(DESTDIR)$(mandir)/mann ; \ +# done test: binaries libraries - sed -e "s#\@RELPATH\@#.#" -e "s#\@tls_LIB_FILE\@#$(tls_LIB_FILE)#" \ - < $(srcdir)/pkgIndex.tcl.in > pkgIndex.tcl - LD_LIBRARY_PATH=$(BUILD_DIR):$(TCL_BIN_DIR):$(LD_LIBRARY_PATH) \ - PATH="$(BUILD_DIR)":"$(TCL_BIN_DIR)":"$(PATH)" \ - $(TCLSH_PROG) `@CYGPATH@ $(srcdir)/tests/all.tcl` $(TESTFLAGS) + $(TCLSH) `@CYGPATH@ $(srcdir)/tests/all.tcl` $(TESTFLAGS) + +shell: binaries libraries + @$(TCLSH) $(SCRIPT) + +gdb: + $(TCLSH_ENV) gdb $(TCLSH_PROG) $(SCRIPT) depend: #======================================================================== -# Enumerate the names of the object files included in this package. -# These objects are created and linked into the final library. In -# most cases these object files will correspond to the source files -# above. -# -# $(exampleA_LIB_FILE) should be listed as part of the BINARIES variable -# at the top of the Makefile. That will ensure that this target is built -# when you run "make binaries". -# -# You shouldn't need to modify this target, except to change the package -# name from "exampleA" to your package's name. +# $(PKG_LIB_FILE) should be listed as part of the BINARIES variable +# mentioned above. That will ensure that this target is built when you +# run "make binaries". +# +# The $(PKG_OBJECTS) objects are created and linked into the final +# library. In most cases these object files will correspond to the +# source files above. #======================================================================== -$(tls_LIB_FILE): $(tls_OBJECTS) - -rm -f $(tls_LIB_FILE) - @MAKE_LIB@ - $(RANLIB) $(tls_LIB_FILE) +$(PKG_LIB_FILE): $(PKG_OBJECTS) + -rm -f $(PKG_LIB_FILE) + ${MAKE_LIB} + $(RANLIB) $(PKG_LIB_FILE) #======================================================================== # We need to enumerate the list of .c to .o lines here. -# Unfortunately, there does not seem to be any other way to do this -# in a Makefile-independent way. We can't use VPATH because it picks up -# object files that may be located in the source directory. # # In the following lines, $(srcdir) refers to the toplevel directory # containing your extension. If your sources are in a subdirectory, # you will have to modify the paths to reflect this: # -# exampleA.$(OBJEXT): $(srcdir)/src/win/exampleA.c -# $(COMPILE) -c `@CYGPATH@ $(srcdir)/src/win/exampleA.c` -o $@ +# sample.$(OBJEXT): $(srcdir)/generic/sample.c +# $(COMPILE) -c `@CYGPATH@ $(srcdir)/generic/sample.c` -o $@ +# +# Setting the VPATH variable to a list of paths will cause the makefile +# to look into these paths when resolving .c to .obj dependencies. +# As necessary, add $(srcdir):$(srcdir)/compat:.... +#======================================================================== + +VPATH = $(srcdir) + +.c.$(OBJEXT): + $(COMPILE) -c `@CYGPATH@ $<` -o $@ + +#======================================================================== +# Create the pkgIndex.tcl file. +# It is usually easiest to let Tcl do this for you with pkg_mkIndex, but +# you may find that you need to customize the package. If so, either +# modify the -hand version, or create a pkgIndex.tcl.in file and have +# the configure script output the pkgIndex.tcl by editing configure.in. #======================================================================== -tls.$(OBJEXT): $(srcdir)/tls.c - $(COMPILE) -c `@CYGPATH@ $(srcdir)/tls.c` -o $@ - -tlsIO.$(OBJEXT): $(srcdir)/tlsIO.c - $(COMPILE) -c `@CYGPATH@ $(srcdir)/tlsIO.c` -o $@ - -tlsBIO.$(OBJEXT): $(srcdir)/tlsBIO.c - $(COMPILE) -c `@CYGPATH@ $(srcdir)/tlsBIO.c` -o $@ - -tlsX509.$(OBJEXT): $(srcdir)/tlsX509.c - $(COMPILE) -c `@CYGPATH@ $(srcdir)/tlsX509.c` -o $@ - -fixstrtod.$(OBJEXT): $(srcdir)/fixstrtod.c - $(COMPILE) -c `@CYGPATH@ $(srcdir)/fixstrtod.c` -o $@ - -strncasecmp.$(OBJEXT): $(srcdir)/strncasecmp.c - $(COMPILE) -c `@CYGPATH@ $(srcdir)/strncasecmp.c` -o $@ +pkgIndex.tcl-auto: + ( echo pkg_mkIndex . $(PKG_LIB_FILE) \; exit; ) | $(TCLSH) + +pkgIndex.tcl: + (echo 'package ifneeded $(PACKAGE_NAME) $(PACKAGE_VERSION) \ + "[list load [file join $$dir $(PKG_LIB_FILE)]] ; \ + [list source [file join $$dir tls.tcl]]"'\ + ) > pkgIndex.tcl #======================================================================== # End of user-definable section #======================================================================== @@ -309,54 +275,50 @@ # variable in configure.in #======================================================================== clean: -test -z "$(BINARIES)" || rm -f $(BINARIES) - -rm -f *.o core *.core - -rm -f *.$(OBJEXT) + -rm -f *.$(OBJEXT) core *.core -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) distclean: clean -rm -f *.tab.c - -rm -f Makefile $(CONFIG_CLEAN_FILES) - -rm -f config.cache config.log stamp-h stamp-h[0-9]* - -rm -f config.status + -rm -f $(CONFIG_CLEAN_FILES) + -rm -f config.cache config.log config.status -PKG_DIR = $(PACKAGE)$(VERSION) COMPEXE = gzip COMPEXT = gz COMPRESS = tar cvf - $(PKG_DIR) | $(COMPEXE) > $(PKG_DIR).tar.$(COMPEXT) DIST_ROOT = /tmp/dist DIST_DIR = $(DIST_ROOT)/$(PKG_DIR) dist-clean: rm -rf $(DIST_DIR) $(DIST_ROOT)/$(PKG_DIR).tar.$(COMPEXT) -dist: dist-clean $(srcdir)/configure +dist: dist-clean mkdir -p $(DIST_DIR) cp -p $(srcdir)/README.txt $(srcdir)/ChangeLog $(srcdir)/tls.htm \ $(srcdir)/configure $(srcdir)/configure.in \ - $(srcdir)/Makefile.in $(srcdir)/*.c $(srcdir)/*.h \ - $(srcdir)/pkgIndex.tcl.in $(srcdir)/license.terms \ + $(srcdir)/Makefile.in $(srcdir)/*.[ch] \ + $(srcdir)/license.terms \ $(srcdir)/aclocal.m4 $(srcdir)/tls.tcl \ $(DIST_DIR) + chmod 664 $(DIST_DIR)/Makefile.in $(DIST_DIR)/aclocal.m4 + chmod 775 $(DIST_DIR)/configure $(DIST_DIR)/configure.in - mkdir $(DIST_DIR)/config - cp -p $(srcdir)/config/install-sh $(srcdir)/config/mkinstalldirs \ - $(srcdir)/config/tcl.m4 \ - $(DIST_DIR)/config + mkdir $(DIST_DIR)/tclconfig + cp -p $(srcdir)/tclconfig/install-sh $(srcdir)/tclconfig/tcl.m4 \ + $(DIST_DIR)/tclconfig/ + chmod 664 $(DIST_DIR)/tclconfig/tcl.m4 + chmod +x $(DIST_DIR)/tclconfig/install-sh mkdir $(DIST_DIR)/tests cp -p $(srcdir)/tests/*.{tcl,test} $(DIST_DIR)/tests mkdir $(DIST_DIR)/tests/certs cp -p $(srcdir)/tests/certs/*.{pem,key,req,txt} $(DIST_DIR)/tests/certs - chmod 664 $(DIST_DIR)/Makefile.in - chmod 775 $(DIST_DIR)/configure $(DIST_DIR)/configure.in - chmod +x $(DIST_DIR)/config/install-sh - (cd $(DIST_ROOT); $(COMPRESS);) #======================================================================== # Install binary object libraries. On Windows this includes both .dll and # .lib files. Because the .lib files are not explicitly listed anywhere, @@ -367,67 +329,75 @@ # file in the install location (assuming it can find a usable tclsh8.2 shell) # # You should not have to modify this target. #======================================================================== -install-lib-binaries: installdirs - @list='$(lib_BINARIES)'; for p in $$list; do \ - if test -f $$p; then \ - ext=`echo $$p|sed -e "s/.*\.//"`; \ - if test "x$$ext" = "xdll"; then \ - echo " $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/$$p"; \ - $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/$$p; \ - lib=`basename $$p|sed -e 's/.[^.]*$$//'`.lib; \ - if test -f $$lib; then \ - echo " $(INSTALL_PROGRAM) $$lib $(DESTDIR)$(libdir)/$$lib"; \ - $(INSTALL_PROGRAM) $$lib $(DESTDIR)$(libdir)/$$lib; \ - fi; \ - else \ - echo " $(INSTALL_PROGRAM) $$p $(DESTDIR)$(libdir)/$$p"; \ - $(INSTALL_PROGRAM) $$p $(DESTDIR)$(libdir)/$$p; \ - fi; \ - else :; fi; \ - done - @list='$(lib_BINARIES)'; for p in $$list; do \ - if test -f $$p; then \ - echo " $(RANLIB) $(DESTDIR)$(bindir)/$$p"; \ - $(RANLIB) $(DESTDIR)$(bindir)/$$p; \ - else :; fi; \ +install-lib-binaries: + @mkdir -p $(DESTDIR)$(pkglibdir) + @list='$(lib_BINARIES)'; for p in $$list; do \ + if test -f $$p; then \ + echo " $(INSTALL_PROGRAM) $$p $(DESTDIR)$(pkglibdir)/$$p"; \ + $(INSTALL_PROGRAM) $$p $(DESTDIR)$(pkglibdir)/$$p; \ + stub=`echo $$p|sed -e "s/.*\(stub\).*/\1/"`; \ + if test "x$$stub" = "xstub"; then \ + echo " $(RANLIB_STUB) $(DESTDIR)$(pkglibdir)/$$p"; \ + $(RANLIB_STUB) $(DESTDIR)$(pkglibdir)/$$p; \ + else \ + echo " $(RANLIB) $(DESTDIR)$(pkglibdir)/$$p"; \ + $(RANLIB) $(DESTDIR)$(pkglibdir)/$$p; \ + fi; \ + ext=`echo $$p|sed -e "s/.*\.//"`; \ + if test "x$$ext" = "xdll"; then \ + lib=`basename $$p|sed -e 's/.[^.]*$$//'`.lib; \ + if test -f $$lib; then \ + echo " $(INSTALL_DATA) $$lib $(DESTDIR)$(pkglibdir)/$$lib"; \ + $(INSTALL_DATA) $$lib $(DESTDIR)$(pkglibdir)/$$lib; \ + fi; \ + fi; \ + fi; \ + done + @list='$(PKG_TCL_SOURCES)'; for p in $$list; do \ + if test -f $(srcdir)/$$p; then \ + destp=`basename $$p`; \ + echo " Install $$destp $(DESTDIR)$(pkglibdir)/$$destp"; \ + $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(pkglibdir)/$$destp; \ + fi; \ done #======================================================================== # Install binary executables (e.g. .exe files) # # You should not have to modify this target. #======================================================================== -install-bin-binaries: installdirs +install-bin-binaries: + @mkdir -p $(DESTDIR)$(bindir) @list='$(bin_BINARIES)'; for p in $$list; do \ if test -f $$p; then \ - echo " $(INSTALL_DATA) $$p $(DESTDIR)$(bindir)/$$p"; \ - $(INSTALL_DATA) $$p $(DESTDIR)$(bindir)/$$p; \ - else :; fi; \ + echo " $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/$$p"; \ + $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/$$p; \ + fi; \ done -.SUFFIXES: .c .o .obj +.SUFFIXES: .c .$(OBJEXT) Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) \ && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status uninstall-binaries: - @$(NORMAL_UNINSTALL) - list='$(BINARIES)'; for p in $$list; do \ - rm -f $(DESTDIR)$(libdir)/$$p; \ + list='$(lib_BINARIES)'; for p in $$list; do \ + rm -f $(DESTDIR)$(pkglibdir)/$$p; \ + done + list='$(PKG_TCL_SOURCES)'; for p in $$list; do \ + p=`basename $$p`; \ + rm -f $(DESTDIR)$(pkglibdir)/$$p; \ + done + list='$(bin_BINARIES)'; for p in $$list; do \ + rm -f $(DESTDIR)$(bindir)/$$p; \ done -installdirs: - $(mkinstalldirs) $(DESTDIR)$(libdir) - $(mkinstalldirs) $(DESTDIR)$(bindir) - $(mkinstalldirs) $(DESTDIR)$(pkglibdir) - -.PHONY: all binaries clean depend distclean doc install installdirs \ -libraries test +.PHONY: all binaries clean depend distclean doc install libraries test # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: Index: aclocal.m4 ================================================================== --- aclocal.m4 +++ aclocal.m4 @@ -1,1 +1,160 @@ -builtin(include,config/tcl.m4) +builtin(include,tclconfig/tcl.m4) + +#------------------------------------------------------------------------ +# TLS_SSL_DIR -- +# +# Locate the installed ssl files +# +# Arguments: +# None. +# +# Requires: +# CYGPATH must be set +# +# Results: +# +# Adds a --with-ss-dir switch to configure. +# Result is cached. +# +# Substs the following vars: +# SSL_DIR +#------------------------------------------------------------------------ + +AC_DEFUN(TLS_CHECK_SSL, [ + +#-------------------------------------------------------------------- +# If the variable OPENSSL is set, we will build with the OpenSSL +# libraries. If it is not set, then we will use RSA BSAFE SSL-C +# libraries instead of the default OpenSSL libaries. +#-------------------------------------------------------------------- + + AC_ARG_ENABLE(bsafe, [ --enable-bsafe Use RSA BSAFE SSL-C libs. Default is to use OpenSSL libs], OPENSSL="", OPENSSL="1") + +#-------------------------------------------------------------------- +# Establish the location of the root directory for OpenSSL. +# If we're not using OpenSSL, set the root for BSAFE SSL-C. +# If we're using BSAFE, define the BSAFE compiler flag. +# The "FLAT_INC" flag is used in the BSAFE ssl.h header file and +# doesn't seem to be referenced anywhere else. +#-------------------------------------------------------------------- + if test -n "${OPENSSL}"; then + SSL_DIR='/usr/local/ssl' + AC_DEFINE(NO_IDEA) + AC_DEFINE(NO_RC5) + else + SSL_DIR='/use/local/sslc' + AC_DEFINE(BSAFE) + AC_DEFINE(FLAT_INC) + fi + + AC_MSG_CHECKING([for SSL directory]) + + AC_ARG_WITH(ssl-dir, [ --with-ssl-dir=DIR SSL root directory], with_ssldir=${withval}) + + AC_CACHE_VAL(ac_cv_c_ssldir, [ + # Use the value from --with-ssl-dir, if it was given + if test x"${with_ssldir}" != x ; then + if test -d "${with_ssldir}" ; then + ac_cv_c_ssldir=${with_ssldir} + else + AC_MSG_ERROR([${with_ssldir} is not a valid directory]) + fi + else + list="`ls -d ${SSL_DIR} 2>/dev/null`" + for i in $list ; do + if test -d "$i" ; then + ac_cv_c_ssldir=$i + break + fi + done + fi + ]) + + # Print a message based on how we determined the include path + + if test x"${ac_cv_c_ssldir}" = x ; then + AC_MSG_ERROR([Could not find SSL directory. +Please specify its location with --with-ssl-dir]) + else + SSL_DIR=${ac_cv_c_ssldir} + AC_MSG_RESULT([${SSL_DIR}]) + fi + + #-------------------------------------------------------------------- + # If we're using RSA BSAFE SSL-C, we need to establish what platform + # we're running on before we can figure out some paths. + # This step isn't necessary if we're using OpenSSL. + #-------------------------------------------------------------------- + + if test -z "${OPENSSL}"; then + AC_MSG_CHECKING(host type) + case "`uname -s`" in + *win32* | *WIN32* | *CYGWIN_NT*|*CYGWIN_98*|*CYGWIN_95*) + PLATFORM=WIN32 + ;; + *SunOS*) + PLATFORM=SOLARIS + ;; + HP-UX) + PLATFORM=HPUX + ;; + *) + PLATFORM=LINUX + ;; + esac + AC_MSG_RESULT(${PLATFORM}) + fi + + #-------------------------------------------------------------------- + # The OpenSSL and BSAFE SSL-C directory structures differ. + #-------------------------------------------------------------------- + + if test -n "${OPENSSL}"; then + SSL_LIB_DIR=${SSL_DIR}/lib + SSL_INCLUDE_DIR=${SSL_DIR}/include + if test ! -f "${SSL_INCLUDE_DIR}/openssl/opensslv.h"; then + AC_ERROR([bad ssl-dir: cannot find openssl/opensslv.h under ${SSL_INCLUDE_DIR}]) + fi + else + SSL_LIB_DIR=${SSL_DIR}/${PLATFORM}/library/lib + SSL_INCLUDE_DIR=${SSL_DIR}/${PLATFORM}/library/include + if test ! -f "${SSL_INCLUDE_DIR}/crypto.h"; then + AC_ERROR([bad ssl-dir: cannot find crypto.h under ${SSL_INCLUDE_DIR}]) + fi + fi + + AC_SUBST(SSL_DIR) + AC_SUBST(SSL_LIB_DIR) + AC_SUBST(SSL_INCLUDE_DIR) + + SSL_INCLUDE_DIR_NATIVE=\"`${CYGPATH} ${SSL_INCLUDE_DIR}`\" + AC_SUBST(SSL_INCLUDE_DIR_NATIVE) + + #-------------------------------------------------------------------- + # If OpenSSL was built with gcc then there may be some symbols that need + # resolving before we can load it into tclsh (__udivd3i on solaris. + # Let the user specify if we need to add libgcc to the link line to + # resolve these symbols. + # + # This doesn't seem to be necessary if the RSA BSAFE SSL-C libraries + # are used instead of OpenSSL. + #-------------------------------------------------------------------- + + if test -n "${OPENSSL}"; then + + AC_MSG_CHECKING(if libgcc is needed to resolve openssl symbols) + + AC_ARG_WITH(gcclib, [ --with-gcclib link with libgcc to resolve symbols in a gcc-built openssl library], GCCLIB="-lgcc", GCCLIB="") + + if test "x${GCCLIB}" = "x" ; then + AC_MSG_RESULT(no) + else + AC_MSG_RESULT(yes) + AC_MSG_CHECKING(for gcc library location) + GCCPATH=`${CC} -print-libgcc-file-name | sed -e 's#[^/]*$##'` + GCCPATH="-L${GCCPATH}" + AC_MSG_RESULT(${GCCPATH}) + fi + fi + +]) Index: configure ================================================================== --- configure +++ configure @@ -1,60 +1,342 @@ #! /bin/sh - # Guess values for system-dependent variables and create Makefiles. -# Generated automatically using autoconf version 2.13 -# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc. +# Generated by GNU Autoconf 2.57 for tls 1.5.0. # +# Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, 2002 +# Free Software Foundation, Inc. # This configure script is free software; the Free Software Foundation # gives unlimited permission to copy, distribute and modify it. +## --------------------- ## +## M4sh Initialization. ## +## --------------------- ## -# Defaults: -ac_help= +# Be Bourne compatible +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' +elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then + set -o posix +fi + +# Support unset when possible. +if (FOO=FOO; unset FOO) >/dev/null 2>&1; then + as_unset=unset +else + as_unset=false +fi + + +# Work around bugs in pre-3.0 UWIN ksh. +$as_unset ENV MAIL MAILPATH +PS1='$ ' +PS2='> ' +PS4='+ ' + +# NLS nuisances. +for as_var in \ + LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ + LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ + LC_TELEPHONE LC_TIME +do + if (set +x; test -n "`(eval $as_var=C; export $as_var) 2>&1`"); then + eval $as_var=C; export $as_var + else + $as_unset $as_var + fi +done + +# Required to use basename. +if expr a : '\(a\)' >/dev/null 2>&1; then + as_expr=expr +else + as_expr=false +fi + +if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false +fi + + +# Name of the executable. +as_me=`$as_basename "$0" || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)$' \| \ + . : '\(.\)' 2>/dev/null || +echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } + /^X\/\(\/\/\)$/{ s//\1/; q; } + /^X\/\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + + +# PATH needs CR, and LINENO needs CR and PATH. +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + echo "#! /bin/sh" >conf$$.sh + echo "exit 0" >>conf$$.sh + chmod +x conf$$.sh + if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then + PATH_SEPARATOR=';' + else + PATH_SEPARATOR=: + fi + rm -f conf$$.sh +fi + + + as_lineno_1=$LINENO + as_lineno_2=$LINENO + as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x$as_lineno_3" = "x$as_lineno_2" || { + # Find who we are. Look in the path if we contain no path at all + # relative or not. + case $0 in + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break +done + + ;; + esac + # We did not find ourselves, most probably we were run as `sh COMMAND' + # in which case we are not to be found in the path. + if test "x$as_myself" = x; then + as_myself=$0 + fi + if test ! -f "$as_myself"; then + { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2 + { (exit 1); exit 1; }; } + fi + case $CONFIG_SHELL in + '') + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for as_base in sh bash ksh sh5; do + case $as_dir in + /*) + if ("$as_dir/$as_base" -c ' + as_lineno_1=$LINENO + as_lineno_2=$LINENO + as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then + $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } + $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } + CONFIG_SHELL=$as_dir/$as_base + export CONFIG_SHELL + exec "$CONFIG_SHELL" "$0" ${1+"$@"} + fi;; + esac + done +done +;; + esac + + # Create $as_me.lineno as a copy of $as_myself, but with $LINENO + # uniformly replaced by the line number. The first 'sed' inserts a + # line-number line before each line; the second 'sed' does the real + # work. The second script uses 'N' to pair each line-number line + # with the numbered line, and appends trailing '-' during + # substitution so that $LINENO is not a special case at line end. + # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the + # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) + sed '=' <$as_myself | + sed ' + N + s,$,-, + : loop + s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3, + t loop + s,-$,, + s,^['$as_cr_digits']*\n,, + ' >$as_me.lineno && + chmod +x $as_me.lineno || + { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 + { (exit 1); exit 1; }; } + + # Don't try to exec as it changes $[0], causing all sort of problems + # (the dirname of $[0] is not the place where we might find the + # original and so on. Autoconf is especially sensible to this). + . ./$as_me.lineno + # Exit status is that of the last command. + exit +} + + +case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in + *c*,-n*) ECHO_N= ECHO_C=' +' ECHO_T=' ' ;; + *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; + *) ECHO_N= ECHO_C='\c' ECHO_T= ;; +esac + +if expr a : '\(a\)' >/dev/null 2>&1; then + as_expr=expr +else + as_expr=false +fi + +rm -f conf$$ conf$$.exe conf$$.file +echo >conf$$.file +if ln -s conf$$.file conf$$ 2>/dev/null; then + # We could just check for DJGPP; but this test a) works b) is more generic + # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). + if test -f conf$$.exe; then + # Don't use ln at all; we don't have any links + as_ln_s='cp -p' + else + as_ln_s='ln -s' + fi +elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln +else + as_ln_s='cp -p' +fi +rm -f conf$$ conf$$.exe conf$$.file + +if mkdir -p . 2>/dev/null; then + as_mkdir_p=: +else + as_mkdir_p=false +fi + +as_executable_p="test -f" + +# Sed expression to map a string onto a valid CPP name. +as_tr_cpp="sed y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g" + +# Sed expression to map a string onto a valid variable name. +as_tr_sh="sed y%*+%pp%;s%[^_$as_cr_alnum]%_%g" + + +# IFS +# We need space, tab and new line, in precisely that order. +as_nl=' +' +IFS=" $as_nl" + +# CDPATH. +$as_unset CDPATH + + +# Name of the host. +# hostname on some systems (SVR3.2, Linux) returns a bogus exit status, +# so uname gets run too. +ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` + +exec 6>&1 + +# +# Initializations. +# ac_default_prefix=/usr/local -# Any additions from configure.in: -ac_help="$ac_help - --enable-bsafe Use RSA BSAFE SSL-C libs. Default is to use OpenSSL libs" -ac_help="$ac_help - --with-ssl-dir=DIR SSL root directory" -ac_help="$ac_help - --enable-patents Use patented code. Default is enabled" -ac_help="$ac_help - --enable-gcc allow use of gcc if available [--disable-gcc]" -ac_help="$ac_help - --with-gcclib link with libgcc to resolve symbols in a gcc-built openssl library" -ac_help="$ac_help - --with-tcl directory containing tcl configuration (tclConfig.sh)" -ac_help="$ac_help - --with-tclinclude directory containing the public Tcl header files." -ac_help="$ac_help - --enable-threads build with threads" -ac_help="$ac_help - --enable-shared build and link with shared libraries [--enable-shared]" -ac_help="$ac_help - --enable-symbols build with debugging symbols [--disable-symbols]" +ac_config_libobj_dir=. +cross_compiling=no +subdirs= +MFLAGS= +MAKEFLAGS= +SHELL=${CONFIG_SHELL-/bin/sh} + +# Maximum number of lines to put in a shell here document. +# This variable seems obsolete. It should probably be removed, and +# only ac_max_sed_lines should be used. +: ${ac_max_here_lines=38} + +# Identity of this package. +PACKAGE_NAME='tls' +PACKAGE_TARNAME='tls' +PACKAGE_VERSION='1.5.0' +PACKAGE_STRING='tls 1.5.0' +PACKAGE_BUGREPORT='' + +# Factoring default headers for most tests. +ac_includes_default="\ +#include +#if HAVE_SYS_TYPES_H +# include +#endif +#if HAVE_SYS_STAT_H +# include +#endif +#if STDC_HEADERS +# include +# include +#else +# if HAVE_STDLIB_H +# include +# endif +#endif +#if HAVE_STRING_H +# if !STDC_HEADERS && HAVE_MEMORY_H +# include +# endif +# include +#endif +#if HAVE_STRINGS_H +# include +#endif +#if HAVE_INTTYPES_H +# include +#else +# if HAVE_STDINT_H +# include +# endif +#endif +#if HAVE_UNISTD_H +# include +#endif" + +ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS CYGPATH EXEEXT PKG_LIB_FILE PKG_STUB_LIB_FILE PKG_STUB_SOURCES PKG_STUB_OBJECTS PKG_TCL_SOURCES PKG_HEADERS PKG_INCLUDES PKG_LIBS PKG_CFLAGS TCL_VERSION TCL_BIN_DIR TCL_SRC_DIR TCL_LIB_FILE TCL_LIB_FLAG TCL_LIB_SPEC TCL_STUB_LIB_FILE TCL_STUB_LIB_FLAG TCL_STUB_LIB_SPEC TCL_LIBS TCL_DEFS TCL_EXTRA_CFLAGS TCL_LD_FLAGS TCL_SHLIB_LD_LIBS CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC OBJEXT CPP INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA SET_MAKE RANLIB ac_ct_RANLIB EGREP MATH_LIBS PKG_SOURCES PKG_OBJECTS CLEANFILES TCL_INCLUDES TCL_THREADS SHARED_BUILD AR LIBOBJS DL_LIBS CFLAGS_DEBUG CFLAGS_OPTIMIZE CFLAGS_WARNING EXTRA_CFLAGS STLIB_LD SHLIB_LD SHLIB_CFLAGS SHLIB_LD_FLAGS SHLIB_LD_LIBS LDFLAGS_DEBUG LDFLAGS_OPTIMIZE LD_LIBRARY_PATH_VAR TCL_DBGX CFLAGS_DEFAULT LDFLAGS_DEFAULT SSL_DIR SSL_LIB_DIR SSL_INCLUDE_DIR SSL_INCLUDE_DIR_NATIVE MAKE_LIB MAKE_SHARED_LIB MAKE_STATIC_LIB MAKE_STUB_LIB RANLIB_STUB TCLSH_PROG LTLIBOBJS' +ac_subst_files='' # Initialize some variables set by options. +ac_init_help= +ac_init_version=false # The variables have the same names as the options, with # dashes changed to underlines. -build=NONE -cache_file=./config.cache +cache_file=/dev/null exec_prefix=NONE -host=NONE no_create= -nonopt=NONE no_recursion= prefix=NONE program_prefix=NONE program_suffix=NONE program_transform_name=s,x,x, silent= site= srcdir= -target=NONE verbose= x_includes=NONE x_libraries=NONE + +# Installation directory options. +# These are left unexpanded so users can "make install exec_prefix=/foo" +# and all the variables that are supposed to be based on exec_prefix +# by default will actually change. +# Use braces instead of parens because sh, perl, etc. also accept them. bindir='${exec_prefix}/bin' sbindir='${exec_prefix}/sbin' libexecdir='${exec_prefix}/libexec' datadir='${prefix}/share' sysconfdir='${prefix}/etc' @@ -64,199 +346,143 @@ includedir='${prefix}/include' oldincludedir='/usr/include' infodir='${prefix}/info' mandir='${prefix}/man' -# Initialize some other variables. -subdirs= -MFLAGS= MAKEFLAGS= -SHELL=${CONFIG_SHELL-/bin/sh} -# Maximum number of lines to put in a shell here document. -ac_max_here_lines=12 - ac_prev= for ac_option do - # If the previous option needs an argument, assign it. if test -n "$ac_prev"; then eval "$ac_prev=\$ac_option" ac_prev= continue fi - case "$ac_option" in - -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;; - *) ac_optarg= ;; - esac + ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'` # Accept the important Cygnus configure options, so we can diagnose typos. - case "$ac_option" in + case $ac_option in -bindir | --bindir | --bindi | --bind | --bin | --bi) ac_prev=bindir ;; -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) - bindir="$ac_optarg" ;; + bindir=$ac_optarg ;; -build | --build | --buil | --bui | --bu) - ac_prev=build ;; + ac_prev=build_alias ;; -build=* | --build=* | --buil=* | --bui=* | --bu=*) - build="$ac_optarg" ;; + build_alias=$ac_optarg ;; -cache-file | --cache-file | --cache-fil | --cache-fi \ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) ac_prev=cache_file ;; -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) - cache_file="$ac_optarg" ;; + cache_file=$ac_optarg ;; + + --config-cache | -C) + cache_file=config.cache ;; -datadir | --datadir | --datadi | --datad | --data | --dat | --da) ac_prev=datadir ;; -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \ | --da=*) - datadir="$ac_optarg" ;; + datadir=$ac_optarg ;; -disable-* | --disable-*) - ac_feature=`echo $ac_option|sed -e 's/-*disable-//'` + ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'` # Reject names that are not valid shell variable names. - if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then - { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; } - fi - ac_feature=`echo $ac_feature| sed 's/-/_/g'` - eval "enable_${ac_feature}=no" ;; + expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid feature name: $ac_feature" >&2 + { (exit 1); exit 1; }; } + ac_feature=`echo $ac_feature | sed 's/-/_/g'` + eval "enable_$ac_feature=no" ;; -enable-* | --enable-*) - ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'` + ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` # Reject names that are not valid shell variable names. - if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then - { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; } - fi - ac_feature=`echo $ac_feature| sed 's/-/_/g'` - case "$ac_option" in - *=*) ;; + expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid feature name: $ac_feature" >&2 + { (exit 1); exit 1; }; } + ac_feature=`echo $ac_feature | sed 's/-/_/g'` + case $ac_option in + *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; *) ac_optarg=yes ;; esac - eval "enable_${ac_feature}='$ac_optarg'" ;; + eval "enable_$ac_feature='$ac_optarg'" ;; -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ | --exec | --exe | --ex) ac_prev=exec_prefix ;; -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ | --exec=* | --exe=* | --ex=*) - exec_prefix="$ac_optarg" ;; + exec_prefix=$ac_optarg ;; -gas | --gas | --ga | --g) # Obsolete; use --with-gas. with_gas=yes ;; - -help | --help | --hel | --he) - # Omit some internal or obsolete options to make the list less imposing. - # This message is too long to be a string in the A/UX 3.1 sh. - cat << EOF -Usage: configure [options] [host] -Options: [defaults in brackets after descriptions] -Configuration: - --cache-file=FILE cache test results in FILE - --help print this message - --no-create do not create output files - --quiet, --silent do not print \`checking...' messages - --version print the version of autoconf that created configure -Directory and file names: - --prefix=PREFIX install architecture-independent files in PREFIX - [$ac_default_prefix] - --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX - [same as prefix] - --bindir=DIR user executables in DIR [EPREFIX/bin] - --sbindir=DIR system admin executables in DIR [EPREFIX/sbin] - --libexecdir=DIR program executables in DIR [EPREFIX/libexec] - --datadir=DIR read-only architecture-independent data in DIR - [PREFIX/share] - --sysconfdir=DIR read-only single-machine data in DIR [PREFIX/etc] - --sharedstatedir=DIR modifiable architecture-independent data in DIR - [PREFIX/com] - --localstatedir=DIR modifiable single-machine data in DIR [PREFIX/var] - --libdir=DIR object code libraries in DIR [EPREFIX/lib] - --includedir=DIR C header files in DIR [PREFIX/include] - --oldincludedir=DIR C header files for non-gcc in DIR [/usr/include] - --infodir=DIR info documentation in DIR [PREFIX/info] - --mandir=DIR man documentation in DIR [PREFIX/man] - --srcdir=DIR find the sources in DIR [configure dir or ..] - --program-prefix=PREFIX prepend PREFIX to installed program names - --program-suffix=SUFFIX append SUFFIX to installed program names - --program-transform-name=PROGRAM - run sed PROGRAM on installed program names -EOF - cat << EOF -Host type: - --build=BUILD configure for building on BUILD [BUILD=HOST] - --host=HOST configure for HOST [guessed] - --target=TARGET configure for TARGET [TARGET=HOST] -Features and packages: - --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) - --enable-FEATURE[=ARG] include FEATURE [ARG=yes] - --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] - --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) - --x-includes=DIR X include files are in DIR - --x-libraries=DIR X library files are in DIR -EOF - if test -n "$ac_help"; then - echo "--enable and --with options recognized:$ac_help" - fi - exit 0 ;; + -help | --help | --hel | --he | -h) + ac_init_help=long ;; + -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) + ac_init_help=recursive ;; + -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) + ac_init_help=short ;; -host | --host | --hos | --ho) - ac_prev=host ;; + ac_prev=host_alias ;; -host=* | --host=* | --hos=* | --ho=*) - host="$ac_optarg" ;; + host_alias=$ac_optarg ;; -includedir | --includedir | --includedi | --included | --include \ | --includ | --inclu | --incl | --inc) ac_prev=includedir ;; -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ | --includ=* | --inclu=* | --incl=* | --inc=*) - includedir="$ac_optarg" ;; + includedir=$ac_optarg ;; -infodir | --infodir | --infodi | --infod | --info | --inf) ac_prev=infodir ;; -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) - infodir="$ac_optarg" ;; + infodir=$ac_optarg ;; -libdir | --libdir | --libdi | --libd) ac_prev=libdir ;; -libdir=* | --libdir=* | --libdi=* | --libd=*) - libdir="$ac_optarg" ;; + libdir=$ac_optarg ;; -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ | --libexe | --libex | --libe) ac_prev=libexecdir ;; -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ | --libexe=* | --libex=* | --libe=*) - libexecdir="$ac_optarg" ;; + libexecdir=$ac_optarg ;; -localstatedir | --localstatedir | --localstatedi | --localstated \ | --localstate | --localstat | --localsta | --localst \ | --locals | --local | --loca | --loc | --lo) ac_prev=localstatedir ;; -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ | --localstate=* | --localstat=* | --localsta=* | --localst=* \ | --locals=* | --local=* | --loca=* | --loc=* | --lo=*) - localstatedir="$ac_optarg" ;; + localstatedir=$ac_optarg ;; -mandir | --mandir | --mandi | --mand | --man | --ma | --m) ac_prev=mandir ;; -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) - mandir="$ac_optarg" ;; + mandir=$ac_optarg ;; -nfp | --nfp | --nf) # Obsolete; use --without-fp. with_fp=no ;; -no-create | --no-create | --no-creat | --no-crea | --no-cre \ - | --no-cr | --no-c) + | --no-cr | --no-c | -n) no_create=yes ;; -no-recursion | --no-recursion | --no-recursio | --no-recursi \ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) no_recursion=yes ;; @@ -266,30 +492,30 @@ | --oldin | --oldi | --old | --ol | --o) ac_prev=oldincludedir ;; -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) - oldincludedir="$ac_optarg" ;; + oldincludedir=$ac_optarg ;; -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) ac_prev=prefix ;; -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) - prefix="$ac_optarg" ;; + prefix=$ac_optarg ;; -program-prefix | --program-prefix | --program-prefi | --program-pref \ | --program-pre | --program-pr | --program-p) ac_prev=program_prefix ;; -program-prefix=* | --program-prefix=* | --program-prefi=* \ | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) - program_prefix="$ac_optarg" ;; + program_prefix=$ac_optarg ;; -program-suffix | --program-suffix | --program-suffi | --program-suff \ | --program-suf | --program-su | --program-s) ac_prev=program_suffix ;; -program-suffix=* | --program-suffix=* | --program-suffi=* \ | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) - program_suffix="$ac_optarg" ;; + program_suffix=$ac_optarg ;; -program-transform-name | --program-transform-name \ | --program-transform-nam | --program-transform-na \ | --program-transform-n | --program-transform- \ | --program-transform | --program-transfor \ @@ -302,21 +528,21 @@ | --program-transform-n=* | --program-transform-=* \ | --program-transform=* | --program-transfor=* \ | --program-transfo=* | --program-transf=* \ | --program-trans=* | --program-tran=* \ | --progr-tra=* | --program-tr=* | --program-t=*) - program_transform_name="$ac_optarg" ;; + program_transform_name=$ac_optarg ;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil) silent=yes ;; -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) ac_prev=sbindir ;; -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ | --sbi=* | --sb=*) - sbindir="$ac_optarg" ;; + sbindir=$ac_optarg ;; -sharedstatedir | --sharedstatedir | --sharedstatedi \ | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ | --sharedst | --shareds | --shared | --share | --shar \ | --sha | --sh) @@ -323,62 +549,61 @@ ac_prev=sharedstatedir ;; -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ | --sha=* | --sh=*) - sharedstatedir="$ac_optarg" ;; + sharedstatedir=$ac_optarg ;; -site | --site | --sit) ac_prev=site ;; -site=* | --site=* | --sit=*) - site="$ac_optarg" ;; + site=$ac_optarg ;; -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) ac_prev=srcdir ;; -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) - srcdir="$ac_optarg" ;; + srcdir=$ac_optarg ;; -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ | --syscon | --sysco | --sysc | --sys | --sy) ac_prev=sysconfdir ;; -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) - sysconfdir="$ac_optarg" ;; + sysconfdir=$ac_optarg ;; -target | --target | --targe | --targ | --tar | --ta | --t) - ac_prev=target ;; + ac_prev=target_alias ;; -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) - target="$ac_optarg" ;; + target_alias=$ac_optarg ;; -v | -verbose | --verbose | --verbos | --verbo | --verb) verbose=yes ;; - -version | --version | --versio | --versi | --vers) - echo "configure generated by autoconf version 2.13" - exit 0 ;; + -version | --version | --versio | --versi | --vers | -V) + ac_init_version=: ;; -with-* | --with-*) - ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'` + ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` # Reject names that are not valid shell variable names. - if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then - { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; } - fi + expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid package name: $ac_package" >&2 + { (exit 1); exit 1; }; } ac_package=`echo $ac_package| sed 's/-/_/g'` - case "$ac_option" in - *=*) ;; + case $ac_option in + *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; *) ac_optarg=yes ;; esac - eval "with_${ac_package}='$ac_optarg'" ;; + eval "with_$ac_package='$ac_optarg'" ;; -without-* | --without-*) - ac_package=`echo $ac_option|sed -e 's/-*without-//'` + ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'` # Reject names that are not valid shell variable names. - if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then - { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; } - fi - ac_package=`echo $ac_package| sed 's/-/_/g'` - eval "with_${ac_package}=no" ;; + expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid package name: $ac_package" >&2 + { (exit 1); exit 1; }; } + ac_package=`echo $ac_package | sed 's/-/_/g'` + eval "with_$ac_package=no" ;; --x) # Obsolete; use --with-x. with_x=yes ;; @@ -385,119 +610,565 @@ -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ | --x-incl | --x-inc | --x-in | --x-i) ac_prev=x_includes ;; -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) - x_includes="$ac_optarg" ;; + x_includes=$ac_optarg ;; -x-libraries | --x-libraries | --x-librarie | --x-librari \ | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) ac_prev=x_libraries ;; -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) - x_libraries="$ac_optarg" ;; + x_libraries=$ac_optarg ;; - -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; } + -*) { echo "$as_me: error: unrecognized option: $ac_option +Try \`$0 --help' for more information." >&2 + { (exit 1); exit 1; }; } ;; + *=*) + ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` + # Reject names that are not valid shell variable names. + expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid variable name: $ac_envvar" >&2 + { (exit 1); exit 1; }; } + ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` + eval "$ac_envvar='$ac_optarg'" + export $ac_envvar ;; + *) - if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then - echo "configure: warning: $ac_option: invalid host type" 1>&2 - fi - if test "x$nonopt" != xNONE; then - { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } - fi - nonopt="$ac_option" + # FIXME: should be removed in autoconf 3.0. + echo "$as_me: WARNING: you should use --build, --host, --target" >&2 + expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && + echo "$as_me: WARNING: invalid host type: $ac_option" >&2 + : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option} ;; esac done if test -n "$ac_prev"; then - { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; } -fi - -trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15 - -# File descriptor usage: -# 0 standard input -# 1 file creation -# 2 errors and warnings -# 3 some systems may open it to /dev/tty -# 4 used on the Kubota Titan -# 6 checking for... messages and results -# 5 compiler messages saved in config.log -if test "$silent" = yes; then - exec 6>/dev/null -else - exec 6>&1 -fi -exec 5>./config.log - -echo "\ -This file contains any messages produced by compilers while -running configure, to aid debugging if configure makes a mistake. -" 1>&5 - -# Strip out --no-create and --no-recursion so they do not pile up. -# Also quote any args containing shell metacharacters. -ac_configure_args= -for ac_arg + ac_option=--`echo $ac_prev | sed 's/_/-/g'` + { echo "$as_me: error: missing argument to $ac_option" >&2 + { (exit 1); exit 1; }; } +fi + +# Be sure to have absolute paths. +for ac_var in exec_prefix prefix +do + eval ac_val=$`echo $ac_var` + case $ac_val in + [\\/$]* | ?:[\\/]* | NONE | '' ) ;; + *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 + { (exit 1); exit 1; }; };; + esac +done + +# Be sure to have absolute paths. +for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \ + localstatedir libdir includedir oldincludedir infodir mandir do - case "$ac_arg" in - -no-create | --no-create | --no-creat | --no-crea | --no-cre \ - | --no-cr | --no-c) ;; - -no-recursion | --no-recursion | --no-recursio | --no-recursi \ - | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;; - *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*) - ac_configure_args="$ac_configure_args '$ac_arg'" ;; - *) ac_configure_args="$ac_configure_args $ac_arg" ;; + eval ac_val=$`echo $ac_var` + case $ac_val in + [\\/$]* | ?:[\\/]* ) ;; + *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 + { (exit 1); exit 1; }; };; esac done -# NLS nuisances. -# Only set these to C if already set. These must not be set unconditionally -# because not all systems understand e.g. LANG=C (notably SCO). -# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'! -# Non-C LC_CTYPE values break the ctype check. -if test "${LANG+set}" = set; then LANG=C; export LANG; fi -if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi -if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi -if test "${LC_CTYPE+set}" = set; then LC_CTYPE=C; export LC_CTYPE; fi - -# confdefs.h avoids OS command line length limits that DEFS can exceed. -rm -rf conftest* confdefs.h -# AIX cpp loses on an empty file, so make sure it contains at least a newline. -echo > confdefs.h - -# A filename unique to this package, relative to the directory that -# configure is in, which we can look for to find out if srcdir is correct. -ac_unique_file=tls.h +# There might be people who depend on the old broken behavior: `$host' +# used to hold the argument of --host etc. +# FIXME: To remove some day. +build=$build_alias +host=$host_alias +target=$target_alias + +# FIXME: To remove some day. +if test "x$host_alias" != x; then + if test "x$build_alias" = x; then + cross_compiling=maybe + echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host. + If a cross compiler is detected then cross compile mode will be used." >&2 + elif test "x$build_alias" != "x$host_alias"; then + cross_compiling=yes + fi +fi + +ac_tool_prefix= +test -n "$host_alias" && ac_tool_prefix=$host_alias- + +test "$silent" = yes && exec 6>/dev/null + # Find the source files, if location was not specified. if test -z "$srcdir"; then ac_srcdir_defaulted=yes # Try the directory containing this script, then its parent. - ac_prog=$0 - ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'` - test "x$ac_confdir" = "x$ac_prog" && ac_confdir=. + ac_confdir=`(dirname "$0") 2>/dev/null || +$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$0" : 'X\(//\)[^/]' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)' \| \ + . : '\(.\)' 2>/dev/null || +echo X"$0" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } + /^X\(\/\/\)[^/].*/{ s//\1/; q; } + /^X\(\/\/\)$/{ s//\1/; q; } + /^X\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` srcdir=$ac_confdir if test ! -r $srcdir/$ac_unique_file; then srcdir=.. fi else ac_srcdir_defaulted=no fi if test ! -r $srcdir/$ac_unique_file; then if test "$ac_srcdir_defaulted" = yes; then - { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; } + { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2 + { (exit 1); exit 1; }; } else - { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; } + { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 + { (exit 1); exit 1; }; } fi fi -srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'` +(cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null || + { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2 + { (exit 1); exit 1; }; } +srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'` +ac_env_build_alias_set=${build_alias+set} +ac_env_build_alias_value=$build_alias +ac_cv_env_build_alias_set=${build_alias+set} +ac_cv_env_build_alias_value=$build_alias +ac_env_host_alias_set=${host_alias+set} +ac_env_host_alias_value=$host_alias +ac_cv_env_host_alias_set=${host_alias+set} +ac_cv_env_host_alias_value=$host_alias +ac_env_target_alias_set=${target_alias+set} +ac_env_target_alias_value=$target_alias +ac_cv_env_target_alias_set=${target_alias+set} +ac_cv_env_target_alias_value=$target_alias +ac_env_CC_set=${CC+set} +ac_env_CC_value=$CC +ac_cv_env_CC_set=${CC+set} +ac_cv_env_CC_value=$CC +ac_env_CFLAGS_set=${CFLAGS+set} +ac_env_CFLAGS_value=$CFLAGS +ac_cv_env_CFLAGS_set=${CFLAGS+set} +ac_cv_env_CFLAGS_value=$CFLAGS +ac_env_LDFLAGS_set=${LDFLAGS+set} +ac_env_LDFLAGS_value=$LDFLAGS +ac_cv_env_LDFLAGS_set=${LDFLAGS+set} +ac_cv_env_LDFLAGS_value=$LDFLAGS +ac_env_CPPFLAGS_set=${CPPFLAGS+set} +ac_env_CPPFLAGS_value=$CPPFLAGS +ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set} +ac_cv_env_CPPFLAGS_value=$CPPFLAGS +ac_env_CPP_set=${CPP+set} +ac_env_CPP_value=$CPP +ac_cv_env_CPP_set=${CPP+set} +ac_cv_env_CPP_value=$CPP +# +# Report the --help message. +# +if test "$ac_init_help" = "long"; then + # Omit some internal or obsolete options to make the list less imposing. + # This message is too long to be a string in the A/UX 3.1 sh. + cat <<_ACEOF +\`configure' configures tls 1.5.0 to adapt to many kinds of systems. + +Usage: $0 [OPTION]... [VAR=VALUE]... + +To assign environment variables (e.g., CC, CFLAGS...), specify them as +VAR=VALUE. See below for descriptions of some of the useful variables. + +Defaults for the options are specified in brackets. + +Configuration: + -h, --help display this help and exit + --help=short display options specific to this package + --help=recursive display the short help of all the included packages + -V, --version display version information and exit + -q, --quiet, --silent do not print \`checking...' messages + --cache-file=FILE cache test results in FILE [disabled] + -C, --config-cache alias for \`--cache-file=config.cache' + -n, --no-create do not create output files + --srcdir=DIR find the sources in DIR [configure dir or \`..'] + +_ACEOF + + cat <<_ACEOF +Installation directories: + --prefix=PREFIX install architecture-independent files in PREFIX + [$ac_default_prefix] + --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX + [PREFIX] + +By default, \`make install' will install all the files in +\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify +an installation prefix other than \`$ac_default_prefix' using \`--prefix', +for instance \`--prefix=\$HOME'. + +For better control, use the options below. + +Fine tuning of the installation directories: + --bindir=DIR user executables [EPREFIX/bin] + --sbindir=DIR system admin executables [EPREFIX/sbin] + --libexecdir=DIR program executables [EPREFIX/libexec] + --datadir=DIR read-only architecture-independent data [PREFIX/share] + --sysconfdir=DIR read-only single-machine data [PREFIX/etc] + --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] + --localstatedir=DIR modifiable single-machine data [PREFIX/var] + --libdir=DIR object code libraries [EPREFIX/lib] + --includedir=DIR C header files [PREFIX/include] + --oldincludedir=DIR C header files for non-gcc [/usr/include] + --infodir=DIR info documentation [PREFIX/info] + --mandir=DIR man documentation [PREFIX/man] +_ACEOF + + cat <<\_ACEOF +_ACEOF +fi + +if test -n "$ac_init_help"; then + case $ac_init_help in + short | recursive ) echo "Configuration of tls 1.5.0:";; + esac + cat <<\_ACEOF + +Optional Features: + --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) + --enable-FEATURE[=ARG] include FEATURE [ARG=yes] + --enable-threads build with threads + --enable-shared build and link with shared libraries --enable-shared + --enable-64bit enable 64bit support (where applicable) + --enable-64bit-vis enable 64bit Sparc VIS support + --enable-wince enable Win/CE support (where applicable) + --disable-load disallow dynamic loading and "load" command + --enable-symbols build with debugging symbols --disable-symbols + --enable-bsafe Use RSA BSAFE SSL-C libs. Default is to use OpenSSL libs + --enable-patents Use patented code. Default is enabled + +Optional Packages: + --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] + --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) + --with-tcl directory containing tcl configuration (tclConfig.sh) + --with-tclinclude directory containing the public Tcl header files + --with-celib=DIR use Windows/CE support library from DIR + --with-ssl-dir=DIR SSL root directory + --with-gcclib link with libgcc to resolve symbols in a gcc-built openssl library + +Some influential environment variables: + CC C compiler command + CFLAGS C compiler flags + LDFLAGS linker flags, e.g. -L if you have libraries in a + nonstandard directory + CPPFLAGS C/C++ preprocessor flags, e.g. -I if you have + headers in a nonstandard directory + CPP C preprocessor + +Use these variables to override the choices made by `configure' or to help +it to find libraries and programs with nonstandard names/locations. + +_ACEOF +fi + +if test "$ac_init_help" = "recursive"; then + # If there are subdirs, report their specific --help. + ac_popdir=`pwd` + for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue + test -d $ac_dir || continue + ac_builddir=. + +if test "$ac_dir" != .; then + ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` + # A "../" for each directory in $ac_dir_suffix. + ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` +else + ac_dir_suffix= ac_top_builddir= +fi + +case $srcdir in + .) # No --srcdir option. We are building in place. + ac_srcdir=. + if test -z "$ac_top_builddir"; then + ac_top_srcdir=. + else + ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` + fi ;; + [\\/]* | ?:[\\/]* ) # Absolute path. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir ;; + *) # Relative path. + ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_builddir$srcdir ;; +esac +# Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be +# absolute. +ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd` +ac_abs_top_builddir=`cd "$ac_dir" && cd ${ac_top_builddir}. && pwd` +ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd` +ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd` + + cd $ac_dir + # Check for guested configure; otherwise get Cygnus style configure. + if test -f $ac_srcdir/configure.gnu; then + echo + $SHELL $ac_srcdir/configure.gnu --help=recursive + elif test -f $ac_srcdir/configure; then + echo + $SHELL $ac_srcdir/configure --help=recursive + elif test -f $ac_srcdir/configure.ac || + test -f $ac_srcdir/configure.in; then + echo + $ac_configure --help + else + echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 + fi + cd $ac_popdir + done +fi + +test -n "$ac_init_help" && exit 0 +if $ac_init_version; then + cat <<\_ACEOF +tls configure 1.5.0 +generated by GNU Autoconf 2.57 + +Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, 2002 +Free Software Foundation, Inc. +This configure script is free software; the Free Software Foundation +gives unlimited permission to copy, distribute and modify it. +_ACEOF + exit 0 +fi +exec 5>config.log +cat >&5 <<_ACEOF +This file contains any messages produced by compilers while +running configure, to aid debugging if configure makes a mistake. + +It was created by tls $as_me 1.5.0, which was +generated by GNU Autoconf 2.57. Invocation command line was + + $ $0 $@ + +_ACEOF +{ +cat <<_ASUNAME +## --------- ## +## Platform. ## +## --------- ## + +hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` +uname -m = `(uname -m) 2>/dev/null || echo unknown` +uname -r = `(uname -r) 2>/dev/null || echo unknown` +uname -s = `(uname -s) 2>/dev/null || echo unknown` +uname -v = `(uname -v) 2>/dev/null || echo unknown` + +/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` +/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` + +/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` +/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` +/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` +hostinfo = `(hostinfo) 2>/dev/null || echo unknown` +/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` +/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` +/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` + +_ASUNAME + +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + echo "PATH: $as_dir" +done + +} >&5 + +cat >&5 <<_ACEOF + + +## ----------- ## +## Core tests. ## +## ----------- ## + +_ACEOF + + +# Keep a trace of the command line. +# Strip out --no-create and --no-recursion so they do not pile up. +# Strip out --silent because we don't want to record it for future runs. +# Also quote any args containing shell meta-characters. +# Make two passes to allow for proper duplicate-argument suppression. +ac_configure_args= +ac_configure_args0= +ac_configure_args1= +ac_sep= +ac_must_keep_next=false +for ac_pass in 1 2 +do + for ac_arg + do + case $ac_arg in + -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + continue ;; + *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) + ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + case $ac_pass in + 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;; + 2) + ac_configure_args1="$ac_configure_args1 '$ac_arg'" + if test $ac_must_keep_next = true; then + ac_must_keep_next=false # Got value, back to normal. + else + case $ac_arg in + *=* | --config-cache | -C | -disable-* | --disable-* \ + | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ + | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ + | -with-* | --with-* | -without-* | --without-* | --x) + case "$ac_configure_args0 " in + "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; + esac + ;; + -* ) ac_must_keep_next=true ;; + esac + fi + ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'" + # Get rid of the leading space. + ac_sep=" " + ;; + esac + done +done +$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; } +$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; } + +# When interrupted or exit'd, cleanup temporary files, and complete +# config.log. We remove comments because anyway the quotes in there +# would cause problems or look ugly. +# WARNING: Be sure not to use single quotes in there, as some shells, +# such as our DU 5.0 friend, will then `close' the trap. +trap 'exit_status=$? + # Save into config.log some information that might help in debugging. + { + echo + + cat <<\_ASBOX +## ---------------- ## +## Cache variables. ## +## ---------------- ## +_ASBOX + echo + # The following way of writing the cache mishandles newlines in values, +{ + (set) 2>&1 | + case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in + *ac_space=\ *) + sed -n \ + "s/'"'"'/'"'"'\\\\'"'"''"'"'/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p" + ;; + *) + sed -n \ + "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" + ;; + esac; +} + echo + + cat <<\_ASBOX +## ----------------- ## +## Output variables. ## +## ----------------- ## +_ASBOX + echo + for ac_var in $ac_subst_vars + do + eval ac_val=$`echo $ac_var` + echo "$ac_var='"'"'$ac_val'"'"'" + done | sort + echo + + if test -n "$ac_subst_files"; then + cat <<\_ASBOX +## ------------- ## +## Output files. ## +## ------------- ## +_ASBOX + echo + for ac_var in $ac_subst_files + do + eval ac_val=$`echo $ac_var` + echo "$ac_var='"'"'$ac_val'"'"'" + done | sort + echo + fi + + if test -s confdefs.h; then + cat <<\_ASBOX +## ----------- ## +## confdefs.h. ## +## ----------- ## +_ASBOX + echo + sed "/^$/d" confdefs.h | sort + echo + fi + test "$ac_signal" != 0 && + echo "$as_me: caught signal $ac_signal" + echo "$as_me: exit $exit_status" + } >&5 + rm -f core core.* *.core && + rm -rf conftest* confdefs* conf$$* $ac_clean_files && + exit $exit_status + ' 0 +for ac_signal in 1 2 13 15; do + trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal +done +ac_signal=0 + +# confdefs.h avoids OS command line length limits that DEFS can exceed. +rm -rf conftest* confdefs.h +# AIX cpp loses on an empty file, so make sure it contains at least a newline. +echo >confdefs.h + +# Predefined preprocessor variables. + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_NAME "$PACKAGE_NAME" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_TARNAME "$PACKAGE_TARNAME" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_VERSION "$PACKAGE_VERSION" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_STRING "$PACKAGE_STRING" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" +_ACEOF + + +# Let the site file select an alternate cache file if it wants to. # Prefer explicitly selected file to automatically selected ones. if test -z "$CONFIG_SITE"; then if test "x$prefix" != xNONE; then CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" else @@ -504,815 +1175,243 @@ CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" fi fi for ac_site_file in $CONFIG_SITE; do if test -r "$ac_site_file"; then - echo "loading site script $ac_site_file" + { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5 +echo "$as_me: loading site script $ac_site_file" >&6;} + sed 's/^/| /' "$ac_site_file" >&5 . "$ac_site_file" fi done if test -r "$cache_file"; then - echo "loading cache $cache_file" - . $cache_file + # Some versions of bash will fail to source /dev/null (special + # files actually), so we avoid doing that. + if test -f "$cache_file"; then + { echo "$as_me:$LINENO: loading cache $cache_file" >&5 +echo "$as_me: loading cache $cache_file" >&6;} + case $cache_file in + [\\/]* | ?:[\\/]* ) . $cache_file;; + *) . ./$cache_file;; + esac + fi else - echo "creating cache $cache_file" - > $cache_file + { echo "$as_me:$LINENO: creating cache $cache_file" >&5 +echo "$as_me: creating cache $cache_file" >&6;} + >$cache_file +fi + +# Check that the precious variables saved in the cache have kept the same +# value. +ac_cache_corrupted=false +for ac_var in `(set) 2>&1 | + sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do + eval ac_old_set=\$ac_cv_env_${ac_var}_set + eval ac_new_set=\$ac_env_${ac_var}_set + eval ac_old_val="\$ac_cv_env_${ac_var}_value" + eval ac_new_val="\$ac_env_${ac_var}_value" + case $ac_old_set,$ac_new_set in + set,) + { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 +echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,set) + { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5 +echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,);; + *) + if test "x$ac_old_val" != "x$ac_new_val"; then + { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5 +echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} + { echo "$as_me:$LINENO: former value: $ac_old_val" >&5 +echo "$as_me: former value: $ac_old_val" >&2;} + { echo "$as_me:$LINENO: current value: $ac_new_val" >&5 +echo "$as_me: current value: $ac_new_val" >&2;} + ac_cache_corrupted=: + fi;; + esac + # Pass precious variables to config.status. + if test "$ac_new_set" = set; then + case $ac_new_val in + *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) + ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; + *) ac_arg=$ac_var=$ac_new_val ;; + esac + case " $ac_configure_args " in + *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. + *) ac_configure_args="$ac_configure_args '$ac_arg'" ;; + esac + fi +done +if $ac_cache_corrupted; then + { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5 +echo "$as_me: error: changes in the environment can compromise the build" >&2;} + { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5 +echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;} + { (exit 1); exit 1; }; } fi ac_ext=c -# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' -ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' -ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' -cross_compiling=$ac_cv_prog_cc_cross - -ac_exeext= -ac_objext=o -if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then - # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu. - if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then - ac_n= ac_c=' -' ac_t=' ' - else - ac_n=-n ac_c= ac_t= - fi -else - ac_n= ac_c='\c' ac_t= -fi +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + TEA_VERSION="3.0" + + echo "$as_me:$LINENO: checking for correct TEA configuration" >&5 +echo $ECHO_N "checking for correct TEA configuration... $ECHO_C" >&6 + if test x"${PACKAGE_NAME}" = x ; then + { { echo "$as_me:$LINENO: error: +The PACKAGE_NAME variable must be defined by your TEA configure.in" >&5 +echo "$as_me: error: +The PACKAGE_NAME variable must be defined by your TEA configure.in" >&2;} + { (exit 1); exit 1; }; } + fi + if test x"3.0" = x ; then + { { echo "$as_me:$LINENO: error: +TEA version not specified." >&5 +echo "$as_me: error: +TEA version not specified." >&2;} + { (exit 1); exit 1; }; } + elif test "3.0" != "${TEA_VERSION}" ; then + echo "$as_me:$LINENO: result: warning: TEA version \"3.0\" != ${TEA_VERSION}" >&5 +echo "${ECHO_T}warning: TEA version \"3.0\" != ${TEA_VERSION}" >&6 + else + echo "$as_me:$LINENO: result: ok" >&5 +echo "${ECHO_T}ok" >&6 + fi + case "`uname -s`" in + *win32*|*WIN32*|*CYGWIN_NT*|*CYGWIN_9*|*CYGWIN_ME*|*MINGW32_*) + # Extract the first word of "cygpath", so it can be a program name with args. +set dummy cygpath; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_CYGPATH+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$CYGPATH"; then + ac_cv_prog_CYGPATH="$CYGPATH" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CYGPATH="cygpath -w" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + + test -z "$ac_cv_prog_CYGPATH" && ac_cv_prog_CYGPATH="echo" +fi +fi +CYGPATH=$ac_cv_prog_CYGPATH +if test -n "$CYGPATH"; then + echo "$as_me:$LINENO: result: $CYGPATH" >&5 +echo "${ECHO_T}$CYGPATH" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + EXEEXT=".exe" + TEA_PLATFORM="windows" + ;; + *) + CYGPATH=echo + EXEEXT="" + TEA_PLATFORM="unix" + ;; + esac + + # Check if exec_prefix is set. If not use fall back to prefix + if test x$exec_prefix = xNONE ; then exec_prefix=$prefix ; fi + + + + + # This package name must be replaced statically for AC_SUBST to work + + # Substitute STUB_LIB_FILE in case package creates a stub library too. + + + # We AC_SUBST these here to ensure they are subst'ed, + # in case the user doesn't call TEA_ADD_... + + + + + + ac_aux_dir= -for ac_dir in config $srcdir/config; do +for ac_dir in tclconfig $srcdir/tclconfig; do if test -f $ac_dir/install-sh; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/install-sh -c" break elif test -f $ac_dir/install.sh; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/install.sh -c" break + elif test -f $ac_dir/shtool; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/shtool install -c" + break fi done if test -z "$ac_aux_dir"; then - { echo "configure: error: can not find install-sh or install.sh in config $srcdir/config" 1>&2; exit 1; } -fi -ac_config_guess=$ac_aux_dir/config.guess -ac_config_sub=$ac_aux_dir/config.sub -ac_configure=$ac_aux_dir/configure # This should be Cygnus configure. - -CONFIGDIR=${srcdir}/config - - -#-------------------------------------------------------------------- -# Set package name and version numbers here. The NODOT_VERSION is -# required for constructing the library name on systems that don't -# like dots in # library names (Windows). The VERSION variable is -# used on the other systems. -#-------------------------------------------------------------------- - -PACKAGE=tls - -MAJOR_VERSION=1 -MINOR_VERSION=5 -PATCHLEVEL=0 - -VERSION=${MAJOR_VERSION}.${MINOR_VERSION}${PATCHLEVEL} -NODOT_VERSION=${MAJOR_VERSION}${MINOR_VERSION} - - - - - -#-------------------------------------------------------------------- -# We put this here so that you can compile with -DVERSION="1.2" to -# encode the package version directly into the source files. -#-------------------------------------------------------------------- - -eval cat >> confdefs.h <> confdefs.h <> confdefs.h <<\EOF -#define NO_IDEA 1 -EOF - - cat >> confdefs.h <<\EOF -#define NO_RC5 1 -EOF - -else - SSL_DIR='/use/local/sslc' - cat >> confdefs.h <<\EOF -#define BSAFE 1 -EOF - - cat >> confdefs.h <<\EOF -#define FLAT_INC 1 -EOF - -fi - -#-------------------------------------------------------------------- -# If we're using RSA BSAFE SSL-C, we need to establish what platform -# we're running on before we can figure out some paths. -# This step isn't necessary if we're using OpenSSL. -#-------------------------------------------------------------------- - - -if test -z "${OPENSSL}"; then - echo $ac_n "checking host type""... $ac_c" 1>&6 -echo "configure:658: checking host type" >&5 - case "`uname -s`" in - *win32* | *WIN32* | *CYGWIN_NT*|*CYGWIN_98*|*CYGWIN_95*) - PLATFORM=WIN32 - cat >> confdefs.h <<\EOF -#define WINDOWS 1 -EOF - - ;; - *SunOS*) - PLATFORM=SOLARIS - ;; - HP-UX) - PLATFORM=HPUX - ;; - *) - PLATFORM=LINUX - ;; - esac - echo "$ac_t""${PLATFORM}" 1>&6 -fi - -# Check whether --with-ssl-dir or --without-ssl-dir was given. -if test "${with_ssl_dir+set}" = set; then - withval="$with_ssl_dir" - SSL_DIR=$withval -fi - - -if test ! -d "${SSL_DIR}"; then - { echo "configure: error: ${SSL_DIR} is not a valid directory" 1>&2; exit 1; } -fi - -#-------------------------------------------------------------------- -# The OpenSSL and BSAFE SSL-C directory structures differ. -#-------------------------------------------------------------------- - -if test -n "${OPENSSL}"; then - SSL_LIB_DIR=${SSL_DIR}/lib - SSL_INCLUDE_DIR=${SSL_DIR}/include - if test ! -f "${SSL_INCLUDE_DIR}/openssl/opensslv.h"; then - { echo "configure: error: bad ssl-dir: cannot find openssl/opensslv.h under ${SSL_INCLUDE_DIR}" 1>&2; exit 1; } - fi -else - SSL_LIB_DIR=${SSL_DIR}/${PLATFORM}/library/lib - SSL_INCLUDE_DIR=${SSL_DIR}/${PLATFORM}/library/include - if test ! -f "${SSL_INCLUDE_DIR}/crypto.h"; then - { echo "configure: error: bad ssl-dir: cannot find crypto.h under ${SSL_INCLUDE_DIR}" 1>&2; exit 1; } - fi -fi - - - - - -#-------------------------------------------------------------------- -# Determine if we should use the patented encryption code -#-------------------------------------------------------------------- - -# Check whether --enable-patents or --disable-patents was given. -if test "${enable_patents+set}" = set; then - enableval="$enable_patents" - PATENTS=${enableval} -else - PATENTS=yes -fi - - -if test ${PATENTS} = no; then - cat >> confdefs.h <<\EOF -#define "NO_PATENTS" 1 -EOF - -fi - -#-------------------------------------------------------------------- -# Check whether --enable-gcc or --disable-gcc was given. Do this -# before AC_CYGWIN is called so the compiler can be fully tested by -# built-in autoconf tools. This macro also calls AC_PROG_CC to set -# the compiler if --enable-gcc was not used. -#-------------------------------------------------------------------- - - - # Check whether --enable-gcc or --disable-gcc was given. -if test "${enable_gcc+set}" = set; then - enableval="$enable_gcc" - ok=$enableval -else - ok=no -fi - - if test "$ok" = "yes"; then - CC=gcc - else - case "`uname -s`" in - *win32* | *WIN32* | *CYGWIN_NT* | *CYGWIN_98* | *CYGWIN_95*) - CC=cl - ;; - *) - CC=${CC-cc} - ;; - esac - fi - # Extract the first word of "gcc", so it can be a program name with args. -set dummy gcc; ac_word=$2 -echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:764: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - ac_dummy="$PATH" - for ac_dir in $ac_dummy; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - ac_cv_prog_CC="gcc" - break - fi - done - IFS="$ac_save_ifs" -fi -fi -CC="$ac_cv_prog_CC" -if test -n "$CC"; then - echo "$ac_t""$CC" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - -if test -z "$CC"; then - # Extract the first word of "cc", so it can be a program name with args. -set dummy cc; ac_word=$2 -echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:794: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - ac_prog_rejected=no - ac_dummy="$PATH" - for ac_dir in $ac_dummy; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then - ac_prog_rejected=yes - continue - fi - ac_cv_prog_CC="cc" - break - fi - done - IFS="$ac_save_ifs" -if test $ac_prog_rejected = yes; then - # We found a bogon in the path, so make sure we never use it. - set dummy $ac_cv_prog_CC - shift - if test $# -gt 0; then - # We chose a different compiler from the bogus one. - # However, it has the same basename, so the bogon will be chosen - # first if we set CC to just the basename; use the full file name. - shift - set dummy "$ac_dir/$ac_word" "$@" - shift - ac_cv_prog_CC="$@" - fi -fi -fi -fi -CC="$ac_cv_prog_CC" -if test -n "$CC"; then - echo "$ac_t""$CC" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - - if test -z "$CC"; then - case "`uname -s`" in - *win32* | *WIN32*) - # Extract the first word of "cl", so it can be a program name with args. -set dummy cl; ac_word=$2 -echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:845: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - ac_dummy="$PATH" - for ac_dir in $ac_dummy; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - ac_cv_prog_CC="cl" - break - fi - done - IFS="$ac_save_ifs" -fi -fi -CC="$ac_cv_prog_CC" -if test -n "$CC"; then - echo "$ac_t""$CC" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - ;; - esac - fi - test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; } -fi - -echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 -echo "configure:877: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 - -ac_ext=c -# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. -ac_cpp='$CPP $CPPFLAGS' -ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' -ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' -cross_compiling=$ac_cv_prog_cc_cross - -cat > conftest.$ac_ext << EOF - -#line 888 "configure" -#include "confdefs.h" - -main(){return(0);} -EOF -if { (eval echo configure:893: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then - ac_cv_prog_cc_works=yes - # If we can't run a trivial program, we are probably using a cross compiler. - if (./conftest; exit) 2>/dev/null; then - ac_cv_prog_cc_cross=no - else - ac_cv_prog_cc_cross=yes - fi -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - ac_cv_prog_cc_works=no -fi -rm -fr conftest* -ac_ext=c -# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. -ac_cpp='$CPP $CPPFLAGS' -ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' -ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' -cross_compiling=$ac_cv_prog_cc_cross - -echo "$ac_t""$ac_cv_prog_cc_works" 1>&6 -if test $ac_cv_prog_cc_works = no; then - { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } -fi -echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 -echo "configure:919: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 -echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 -cross_compiling=$ac_cv_prog_cc_cross - -echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 -echo "configure:924: checking whether we are using GNU C" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.c <&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then - ac_cv_prog_gcc=yes -else - ac_cv_prog_gcc=no -fi -fi - -echo "$ac_t""$ac_cv_prog_gcc" 1>&6 - -if test $ac_cv_prog_gcc = yes; then - GCC=yes -else - GCC= -fi - -ac_test_CFLAGS="${CFLAGS+set}" -ac_save_CFLAGS="$CFLAGS" -CFLAGS= -echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 -echo "configure:952: checking whether ${CC-cc} accepts -g" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - echo 'void f(){}' > conftest.c -if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then - ac_cv_prog_cc_g=yes -else - ac_cv_prog_cc_g=no -fi -rm -f conftest* - -fi - -echo "$ac_t""$ac_cv_prog_cc_g" 1>&6 -if test "$ac_test_CFLAGS" = set; then - CFLAGS="$ac_save_CFLAGS" -elif test $ac_cv_prog_cc_g = yes; then - if test "$GCC" = yes; then - CFLAGS="-g -O2" - else - CFLAGS="-g" - fi -else - if test "$GCC" = yes; then - CFLAGS="-O2" - else - CFLAGS= - fi -fi - - -# Find a good install program. We prefer a C program (faster), -# so one script is as good as another. But avoid the broken or -# incompatible versions: -# SysV /etc/install, /usr/sbin/install -# SunOS /usr/etc/install -# IRIX /sbin/install -# AIX /bin/install -# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag -# AFS /usr/afsws/bin/install, which mishandles nonexistent args -# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" -# ./install, which can be erroneously created by make from ./install.sh. -echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 -echo "configure:996: checking for a BSD compatible install" >&5 -if test -z "$INSTALL"; then -if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS=":" - for ac_dir in $PATH; do - # Account for people who put trailing slashes in PATH elements. - case "$ac_dir/" in - /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;; - *) - # OSF1 and SCO ODT 3.0 have their own names for install. - # Don't use installbsd from OSF since it installs stuff as root - # by default. - for ac_prog in ginstall scoinst install; do - if test -f $ac_dir/$ac_prog; then - if test $ac_prog = install && - grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then - # AIX install. It has an incompatible calling convention. - : - else - ac_cv_path_install="$ac_dir/$ac_prog -c" - break 2 - fi - fi - done - ;; - esac - done - IFS="$ac_save_IFS" - -fi - if test "${ac_cv_path_install+set}" = set; then - INSTALL="$ac_cv_path_install" - else - # As a last resort, use the slow shell script. We don't cache a - # path for INSTALL within a source directory, because that will - # break other packages using the cache if that directory is - # removed, or if the path is relative. - INSTALL="$ac_install_sh" - fi -fi -echo "$ac_t""$INSTALL" 1>&6 - -# Use test -z because SunOS4 sh mishandles braces in ${var-val}. -# It thinks the first close brace ends the variable substitution. -test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' - -test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}' - -test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' - - -#-------------------------------------------------------------------- -# If OpenSSL was built with gcc then there may be some symbols that need -# resolving before we can load it into tclsh (__udivd3i on solaris. Let the -# user specify if we need to add libgcc to the link line to resolve these -# symbols. -# -# This doesn't seem to be necessary if the RSA BSAFE SSL-C libraries -# are used instead of OpenSSL. -#-------------------------------------------------------------------- - -if test -n "${OPENSSL}"; then - - echo $ac_n "checking if libgcc is needed to resolve openssl symbols""... $ac_c" 1>&6 -echo "configure:1062: checking if libgcc is needed to resolve openssl symbols" >&5 - - # Check whether --with-gcclib or --without-gcclib was given. -if test "${with_gcclib+set}" = set; then - withval="$with_gcclib" - GCCLIB="-lgcc" -else - GCCLIB="" -fi - - - if test "x${GCCLIB}" = "x" ; then - echo "$ac_t""no" 1>&6 - else - echo "$ac_t""yes" 1>&6 - echo $ac_n "checking for gcc library location""... $ac_c" 1>&6 -echo "configure:1078: checking for gcc library location" >&5 - GCCPATH=`${CC} -print-libgcc-file-name | sed -e 's#[^/]*$##'` - GCCPATH="-L${GCCPATH}" - echo "$ac_t""${GCCPATH}" 1>&6 - fi -fi - -#-------------------------------------------------------------------- -# Checks to see if the make program sets the $MAKE variable. -#-------------------------------------------------------------------- - -echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6 -echo "configure:1090: checking whether ${MAKE-make} sets \${MAKE}" >&5 -set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'` -if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftestmake <<\EOF -all: - @echo 'ac_maketemp="${MAKE}"' -EOF -# GNU make sometimes prints "make[1]: Entering...", which would confuse us. -eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=` -if test -n "$ac_maketemp"; then - eval ac_cv_prog_make_${ac_make}_set=yes -else - eval ac_cv_prog_make_${ac_make}_set=no -fi -rm -f conftestmake -fi -if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then - echo "$ac_t""yes" 1>&6 - SET_MAKE= -else - echo "$ac_t""no" 1>&6 - SET_MAKE="MAKE=${MAKE-make}" -fi - - -#-------------------------------------------------------------------- -# Find ranlib -#-------------------------------------------------------------------- - -# Extract the first word of "ranlib", so it can be a program name with args. -set dummy ranlib; ac_word=$2 -echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1124: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - if test -n "$RANLIB"; then - ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. -else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - ac_dummy="$PATH" - for ac_dir in $ac_dummy; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - ac_cv_prog_RANLIB="ranlib" - break - fi - done - IFS="$ac_save_ifs" - test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":" -fi -fi -RANLIB="$ac_cv_prog_RANLIB" -if test -n "$RANLIB"; then - echo "$ac_t""$RANLIB" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - - -#-------------------------------------------------------------------- -# This macro performs additional compiler tests. -#-------------------------------------------------------------------- - -echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6 -echo "configure:1157: checking for Cygwin environment" >&5 -if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then - rm -rf conftest* - ac_cv_cygwin=yes -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - ac_cv_cygwin=no -fi -rm -f conftest* -rm -f conftest* -fi - -echo "$ac_t""$ac_cv_cygwin" 1>&6 -CYGWIN= -test "$ac_cv_cygwin" = yes && CYGWIN=yes - -#-------------------------------------------------------------------- -# Determines the correct binary file extension (.o, .obj, .exe etc.) -#-------------------------------------------------------------------- - -echo $ac_n "checking for object suffix""... $ac_c" 1>&6 -echo "configure:1195: checking for object suffix" >&5 -if eval "test \"`echo '$''{'ac_cv_objext'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - rm -f conftest* -echo 'int i = 1;' > conftest.$ac_ext -if { (eval echo configure:1201: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then - for ac_file in conftest.*; do - case $ac_file in - *.c) ;; - *) ac_cv_objext=`echo $ac_file | sed -e s/conftest.//` ;; - esac - done -else - { echo "configure: error: installation or configuration problem; compiler does not work" 1>&2; exit 1; } -fi -rm -f conftest* -fi - -echo "$ac_t""$ac_cv_objext" 1>&6 -OBJEXT=$ac_cv_objext -ac_objext=$ac_cv_objext - -echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6 -echo "configure:1219: checking for mingw32 environment" >&5 -if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then - rm -rf conftest* - ac_cv_mingw32=yes -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - ac_cv_mingw32=no -fi -rm -f conftest* -rm -f conftest* -fi - -echo "$ac_t""$ac_cv_mingw32" 1>&6 -MINGW32= -test "$ac_cv_mingw32" = yes && MINGW32=yes - - -echo $ac_n "checking for executable suffix""... $ac_c" 1>&6 -echo "configure:1250: checking for executable suffix" >&5 -if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - if test "$CYGWIN" = yes || test "$MINGW32" = yes; then - ac_cv_exeext=.exe -else - rm -f conftest* - echo 'int main () { return 0; }' > conftest.$ac_ext - ac_cv_exeext= - if { (eval echo configure:1260: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then - for file in conftest.*; do - case $file in - *.c | *.o | *.obj) ;; - *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;; - esac - done - else - { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; } - fi - rm -f conftest* - test x"${ac_cv_exeext}" = x && ac_cv_exeext=no -fi -fi - -EXEEXT="" -test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext} -echo "$ac_t""${ac_cv_exeext}" 1>&6 -ac_exeext=$EXEEXT - - -#-------------------------------------------------------------------- -# "cygpath" is used on windows to generate native path names for -# include files. These variables should only be used with the -# compiler and linker since # they generate native path names. -# -# Unix tclConfig.sh points SRC_DIR at the top-level directory of -# the Tcl sources, while the Windows tclConfig.sh points SRC_DIR at -# the win subdirectory. Hence the different usages of SRC_DIR below. -# -# This must be done before calling SC_PUBLIC_TCL_HEADERS or -# SC_PRIVATE_TCL_HEADERS. -#-------------------------------------------------------------------- - -case "`uname -s`" in - *win32* | *WIN32* | *CYGWIN_NT*|*CYGWIN_98*|*CYGWIN_95*) - CYGPATH="cygpath -w" - RELPATH=".. .. bin" - ;; - *) - CYGPATH=echo - RELPATH=".." - ;; -esac - - - - -SSL_INCLUDE_DIR_NATIVE=\"`${CYGPATH} ${SSL_INCLUDE_DIR}`\" - + { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in tclconfig $srcdir/tclconfig" >&5 +echo "$as_me: error: cannot find install-sh or install.sh in tclconfig $srcdir/tclconfig" >&2;} + { (exit 1); exit 1; }; } +fi +ac_config_guess="$SHELL $ac_aux_dir/config.guess" +ac_config_sub="$SHELL $ac_aux_dir/config.sub" +ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure. #-------------------------------------------------------------------- # Load the tclConfig.sh file #-------------------------------------------------------------------- + # # Ok, lets find the tcl configuration # First, look for one uninstalled. @@ -1320,29 +1419,31 @@ # if test x"${no_tcl}" = x ; then # we reset no_tcl in case something fails here no_tcl=true - # Check whether --with-tcl or --without-tcl was given. + +# Check whether --with-tcl or --without-tcl was given. if test "${with_tcl+set}" = set; then withval="$with_tcl" with_tclconfig=${withval} -fi - - echo $ac_n "checking for Tcl configuration""... $ac_c" 1>&6 -echo "configure:1333: checking for Tcl configuration" >&5 - if eval "test \"`echo '$''{'ac_cv_c_tclconfig'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - +fi; + echo "$as_me:$LINENO: checking for Tcl configuration" >&5 +echo $ECHO_N "checking for Tcl configuration... $ECHO_C" >&6 + if test "${ac_cv_c_tclconfig+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + # First check to see if --with-tcl was specified. if test x"${with_tclconfig}" != x ; then if test -f "${with_tclconfig}/tclConfig.sh" ; then ac_cv_c_tclconfig=`(cd ${with_tclconfig}; pwd)` else - { echo "configure: error: ${with_tclconfig} directory doesn't contain tclConfig.sh" 1>&2; exit 1; } + { { echo "$as_me:$LINENO: error: ${with_tclconfig} directory doesn't contain tclConfig.sh" >&5 +echo "$as_me: error: ${with_tclconfig} directory doesn't contain tclConfig.sh" >&2;} + { (exit 1); exit 1; }; } fi fi # then check for a private Tcl installation if test x"${ac_cv_c_tclconfig}" = x ; then @@ -1360,13 +1461,16 @@ done fi # check in a few common install locations if test x"${ac_cv_c_tclconfig}" = x ; then - for i in `ls -d ${prefix}/lib 2>/dev/null` \ + for i in `ls -d ${exec_prefix}/lib 2>/dev/null` \ + `ls -d ${prefix}/lib 2>/dev/null` \ + `ls -d /usr/local/lib 2>/dev/null` \ + `ls -d /usr/contrib/lib 2>/dev/null` \ `ls -d /usr/lib 2>/dev/null` \ - `ls -d /usr/local/lib 2>/dev/null` ; do + ; do if test -f "$i/tclConfig.sh" ; then ac_cv_c_tclconfig=`(cd $i; pwd)` break fi done @@ -1381,473 +1485,7979 @@ ac_cv_c_tclconfig=`(cd $i/unix; pwd)` break fi done fi - + fi if test x"${ac_cv_c_tclconfig}" = x ; then TCL_BIN_DIR="# no Tcl configs found" - echo "configure: warning: Can't find Tcl configuration definitions" 1>&2 + { echo "$as_me:$LINENO: WARNING: \"Cannot find Tcl configuration definitions\"" >&5 +echo "$as_me: WARNING: \"Cannot find Tcl configuration definitions\"" >&2;} exit 0 else no_tcl= TCL_BIN_DIR=${ac_cv_c_tclconfig} - echo "$ac_t""found $TCL_BIN_DIR/tclConfig.sh" 1>&6 + echo "$as_me:$LINENO: result: found $TCL_BIN_DIR/tclConfig.sh" >&5 +echo "${ECHO_T}found $TCL_BIN_DIR/tclConfig.sh" >&6 fi fi - echo $ac_n "checking for existence of $TCL_BIN_DIR/tclConfig.sh""... $ac_c" 1>&6 -echo "configure:1404: checking for existence of $TCL_BIN_DIR/tclConfig.sh" >&5 + echo "$as_me:$LINENO: checking for existence of $TCL_BIN_DIR/tclConfig.sh" >&5 +echo $ECHO_N "checking for existence of $TCL_BIN_DIR/tclConfig.sh... $ECHO_C" >&6 if test -f "$TCL_BIN_DIR/tclConfig.sh" ; then - echo "$ac_t""loading" 1>&6 + echo "$as_me:$LINENO: result: loading" >&5 +echo "${ECHO_T}loading" >&6 . $TCL_BIN_DIR/tclConfig.sh else - echo "$ac_t""file not found" 1>&6 - fi - - # - # The eval is required to do the TCL_DBGX substitution in the - # TCL_LIB_FILE variable - # - - eval TCL_LIB_FILE=${TCL_LIB_FILE} - eval TCL_LIB_FLAG=${TCL_LIB_FLAG} - - - - - - - - - - - - - - - - - - - - echo $ac_n "checking for Tcl public headers""... $ac_c" 1>&6 -echo "configure:1440: checking for Tcl public headers" >&5 - - # Check whether --with-tclinclude or --without-tclinclude was given. + echo "$as_me:$LINENO: result: file not found" >&5 +echo "${ECHO_T}file not found" >&6 + fi + + # + # If the TCL_BIN_DIR is the build directory (not the install directory), + # then set the common variable name to the value of the build variables. + # For example, the variable TCL_LIB_SPEC will be set to the value + # of TCL_BUILD_LIB_SPEC. An extension should make use of TCL_LIB_SPEC + # instead of TCL_BUILD_LIB_SPEC since it will work with both an + # installed and uninstalled version of Tcl. + # + + if test -f $TCL_BIN_DIR/Makefile ; then + TCL_LIB_SPEC=${TCL_BUILD_LIB_SPEC} + TCL_STUB_LIB_SPEC=${TCL_BUILD_STUB_LIB_SPEC} + TCL_STUB_LIB_PATH=${TCL_BUILD_STUB_LIB_PATH} + fi + + # + # eval is required to do the TCL_DBGX substitution + # + + eval "TCL_LIB_FILE=\"${TCL_LIB_FILE}\"" + eval "TCL_LIB_FLAG=\"${TCL_LIB_FLAG}\"" + eval "TCL_LIB_SPEC=\"${TCL_LIB_SPEC}\"" + + eval "TCL_STUB_LIB_FILE=\"${TCL_STUB_LIB_FILE}\"" + eval "TCL_STUB_LIB_FLAG=\"${TCL_STUB_LIB_FLAG}\"" + eval "TCL_STUB_LIB_SPEC=\"${TCL_STUB_LIB_SPEC}\"" + + + + + + + + + + + + + + #AC_SUBST(TCL_DBGX) + + + + + + #AC_SUBST(TCL_BUILD_LIB_SPEC) + #AC_SUBST(TCL_BUILD_STUB_LIB_SPEC) + + +#----------------------------------------------------------------------- +# Handle the --prefix=... option by defaulting to what Tcl gave. +# Must be called after TEA_LOAD_TCLCONFIG and before TEA_SETUP_COMPILER. +#----------------------------------------------------------------------- + + + # Should be AC_MSG_NOTICE, but that requires autoconf 2.50 + if test "${prefix}" = "NONE"; then + prefix_default=yes + if test x"${TCL_PREFIX}" != x; then + { echo "$as_me:$LINENO: WARNING: --prefix defaulting to TCL_PREFIX ${TCL_PREFIX}" >&5 +echo "$as_me: WARNING: --prefix defaulting to TCL_PREFIX ${TCL_PREFIX}" >&2;} + prefix=${TCL_PREFIX} + else + prefix=/usr/local + fi + fi + if test "${exec_prefix}" = "NONE" -a x"${prefix_default}" = x"yes" ; then + if test x"${TCL_EXEC_PREFIX}" != x; then + { echo "$as_me:$LINENO: WARNING: --exec-prefix defaulting to TCL_EXEC_PREFIX ${TCL_EXEC_PREFIX}" >&5 +echo "$as_me: WARNING: --exec-prefix defaulting to TCL_EXEC_PREFIX ${TCL_EXEC_PREFIX}" >&2;} + exec_prefix=${TCL_EXEC_PREFIX} + else + exec_prefix=$prefix + fi + fi + + +#----------------------------------------------------------------------- +# Standard compiler checks. +# This sets up CC by using the CC env var, or looks for gcc otherwise. +# This also calls AC_PROG_CC, AC_PROG_INSTALL and a few others to create +# the basic setup necessary to compile executables. +#----------------------------------------------------------------------- + + + # Don't put any macros that use the compiler (e.g. AC_TRY_COMPILE) + # in this macro, they need to go into TEA_SETUP_COMPILER instead. + + # If the user did not set CFLAGS, set it now to keep + # the AC_PROG_CC macro from adding "-g -O2". + if test "${CFLAGS+set}" != "set" ; then + CFLAGS="" + fi + + ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. +set dummy ${ac_tool_prefix}gcc; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="${ac_tool_prefix}gcc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + echo "$as_me:$LINENO: result: $CC" >&5 +echo "${ECHO_T}$CC" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + +fi +if test -z "$ac_cv_prog_CC"; then + ac_ct_CC=$CC + # Extract the first word of "gcc", so it can be a program name with args. +set dummy gcc; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_ac_ct_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CC="gcc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 +echo "${ECHO_T}$ac_ct_CC" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + CC=$ac_ct_CC +else + CC="$ac_cv_prog_CC" +fi + +if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. +set dummy ${ac_tool_prefix}cc; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="${ac_tool_prefix}cc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + echo "$as_me:$LINENO: result: $CC" >&5 +echo "${ECHO_T}$CC" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + +fi +if test -z "$ac_cv_prog_CC"; then + ac_ct_CC=$CC + # Extract the first word of "cc", so it can be a program name with args. +set dummy cc; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_ac_ct_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CC="cc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 +echo "${ECHO_T}$ac_ct_CC" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + CC=$ac_ct_CC +else + CC="$ac_cv_prog_CC" +fi + +fi +if test -z "$CC"; then + # Extract the first word of "cc", so it can be a program name with args. +set dummy cc; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else + ac_prog_rejected=no +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then + ac_prog_rejected=yes + continue + fi + ac_cv_prog_CC="cc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +if test $ac_prog_rejected = yes; then + # We found a bogon in the path, so make sure we never use it. + set dummy $ac_cv_prog_CC + shift + if test $# != 0; then + # We chose a different compiler from the bogus one. + # However, it has the same basename, so the bogon will be chosen + # first if we set CC to just the basename; use the full file name. + shift + ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" + fi +fi +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + echo "$as_me:$LINENO: result: $CC" >&5 +echo "${ECHO_T}$CC" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + +fi +if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then + for ac_prog in cl + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. +set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="$ac_tool_prefix$ac_prog" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + echo "$as_me:$LINENO: result: $CC" >&5 +echo "${ECHO_T}$CC" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + test -n "$CC" && break + done +fi +if test -z "$CC"; then + ac_ct_CC=$CC + for ac_prog in cl +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_ac_ct_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CC="$ac_prog" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 +echo "${ECHO_T}$ac_ct_CC" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + test -n "$ac_ct_CC" && break +done + + CC=$ac_ct_CC +fi + +fi + + +test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH +See \`config.log' for more details." >&5 +echo "$as_me: error: no acceptable C compiler found in \$PATH +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } + +# Provide some information about the compiler. +echo "$as_me:$LINENO:" \ + "checking for C compiler version" >&5 +ac_compiler=`set X $ac_compile; echo $2` +{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version &5\"") >&5 + (eval $ac_compiler --version &5) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v &5\"") >&5 + (eval $ac_compiler -v &5) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V &5\"") >&5 + (eval $ac_compiler -V &5) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } + +cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +ac_clean_files_save=$ac_clean_files +ac_clean_files="$ac_clean_files a.out a.exe b.out" +# Try to create an executable without -o first, disregard a.out. +# It will help us diagnose broken compilers, and finding out an intuition +# of exeext. +echo "$as_me:$LINENO: checking for C compiler default output" >&5 +echo $ECHO_N "checking for C compiler default output... $ECHO_C" >&6 +ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` +if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5 + (eval $ac_link_default) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + # Find the output, starting from the most likely. This scheme is +# not robust to junk in `.', hence go to wildcards (a.*) only as a last +# resort. + +# Be careful to initialize this variable, since it used to be cached. +# Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile. +ac_cv_exeext= +# b.out is created by i960 compilers. +for ac_file in a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out +do + test -f "$ac_file" || continue + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) + ;; + conftest.$ac_ext ) + # This is the source file. + ;; + [ab].out ) + # We found the default executable, but exeext='' is most + # certainly right. + break;; + *.* ) + ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` + # FIXME: I believe we export ac_cv_exeext for Libtool, + # but it would be cool to find out if it's true. Does anybody + # maintain Libtool? --akim. + export ac_cv_exeext + break;; + * ) + break;; + esac +done +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +{ { echo "$as_me:$LINENO: error: C compiler cannot create executables +See \`config.log' for more details." >&5 +echo "$as_me: error: C compiler cannot create executables +See \`config.log' for more details." >&2;} + { (exit 77); exit 77; }; } +fi + +ac_exeext=$ac_cv_exeext +echo "$as_me:$LINENO: result: $ac_file" >&5 +echo "${ECHO_T}$ac_file" >&6 + +# Check the compiler produces executables we can run. If not, either +# the compiler is broken, or we cross compile. +echo "$as_me:$LINENO: checking whether the C compiler works" >&5 +echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6 +# FIXME: These cross compiler hacks should be removed for Autoconf 3.0 +# If not cross compiling, check that we can run a simple program. +if test "$cross_compiling" != yes; then + if { ac_try='./$ac_file' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + cross_compiling=no + else + if test "$cross_compiling" = maybe; then + cross_compiling=yes + else + { { echo "$as_me:$LINENO: error: cannot run C compiled programs. +If you meant to cross compile, use \`--host'. +See \`config.log' for more details." >&5 +echo "$as_me: error: cannot run C compiled programs. +If you meant to cross compile, use \`--host'. +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } + fi + fi +fi +echo "$as_me:$LINENO: result: yes" >&5 +echo "${ECHO_T}yes" >&6 + +rm -f a.out a.exe conftest$ac_cv_exeext b.out +ac_clean_files=$ac_clean_files_save +# Check the compiler produces executables we can run. If not, either +# the compiler is broken, or we cross compile. +echo "$as_me:$LINENO: checking whether we are cross compiling" >&5 +echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6 +echo "$as_me:$LINENO: result: $cross_compiling" >&5 +echo "${ECHO_T}$cross_compiling" >&6 + +echo "$as_me:$LINENO: checking for suffix of executables" >&5 +echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6 +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + # If both `conftest.exe' and `conftest' are `present' (well, observable) +# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will +# work properly (i.e., refer to `conftest.exe'), while it won't with +# `rm'. +for ac_file in conftest.exe conftest conftest.*; do + test -f "$ac_file" || continue + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;; + *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` + export ac_cv_exeext + break;; + * ) break;; + esac +done +else + { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link +See \`config.log' for more details." >&5 +echo "$as_me: error: cannot compute suffix of executables: cannot compile and link +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } +fi + +rm -f conftest$ac_cv_exeext +echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5 +echo "${ECHO_T}$ac_cv_exeext" >&6 + +rm -f conftest.$ac_ext +EXEEXT=$ac_cv_exeext +ac_exeext=$EXEEXT +echo "$as_me:$LINENO: checking for suffix of object files" >&5 +echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6 +if test "${ac_cv_objext+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.o conftest.obj +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg ) ;; + *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` + break;; + esac +done +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile +See \`config.log' for more details." >&5 +echo "$as_me: error: cannot compute suffix of object files: cannot compile +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } +fi + +rm -f conftest.$ac_cv_objext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_objext" >&5 +echo "${ECHO_T}$ac_cv_objext" >&6 +OBJEXT=$ac_cv_objext +ac_objext=$OBJEXT +echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 +echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6 +if test "${ac_cv_c_compiler_gnu+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ +#ifndef __GNUC__ + choke me +#endif + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_compiler_gnu=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_compiler_gnu=no +fi +rm -f conftest.$ac_objext conftest.$ac_ext +ac_cv_c_compiler_gnu=$ac_compiler_gnu + +fi +echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 +echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6 +GCC=`test $ac_compiler_gnu = yes && echo yes` +ac_test_CFLAGS=${CFLAGS+set} +ac_save_CFLAGS=$CFLAGS +CFLAGS="-g" +echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 +echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6 +if test "${ac_cv_prog_cc_g+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_prog_cc_g=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_prog_cc_g=no +fi +rm -f conftest.$ac_objext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 +echo "${ECHO_T}$ac_cv_prog_cc_g" >&6 +if test "$ac_test_CFLAGS" = set; then + CFLAGS=$ac_save_CFLAGS +elif test $ac_cv_prog_cc_g = yes; then + if test "$GCC" = yes; then + CFLAGS="-g -O2" + else + CFLAGS="-g" + fi +else + if test "$GCC" = yes; then + CFLAGS="-O2" + else + CFLAGS= + fi +fi +echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5 +echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6 +if test "${ac_cv_prog_cc_stdc+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_cv_prog_cc_stdc=no +ac_save_CC=$CC +cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +#include +#include +#include +/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ +struct buf { int x; }; +FILE * (*rcsopen) (struct buf *, struct stat *, int); +static char *e (p, i) + char **p; + int i; +{ + return p[i]; +} +static char *f (char * (*g) (char **, int), char **p, ...) +{ + char *s; + va_list v; + va_start (v,p); + s = g (p, va_arg (v,int)); + va_end (v); + return s; +} +int test (int i, double x); +struct s1 {int (*f) (int a);}; +struct s2 {int (*f) (double a);}; +int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); +int argc; +char **argv; +int +main () +{ +return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; + ; + return 0; +} +_ACEOF +# Don't try gcc -ansi; that turns off useful extensions and +# breaks some systems' header files. +# AIX -qlanglvl=ansi +# Ultrix and OSF/1 -std1 +# HP-UX 10.20 and later -Ae +# HP-UX older versions -Aa -D_HPUX_SOURCE +# SVR4 -Xc -D__EXTENSIONS__ +for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" +do + CC="$ac_save_CC $ac_arg" + rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_prog_cc_stdc=$ac_arg +break +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +fi +rm -f conftest.$ac_objext +done +rm -f conftest.$ac_ext conftest.$ac_objext +CC=$ac_save_CC + +fi + +case "x$ac_cv_prog_cc_stdc" in + x|xno) + echo "$as_me:$LINENO: result: none needed" >&5 +echo "${ECHO_T}none needed" >&6 ;; + *) + echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5 +echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6 + CC="$CC $ac_cv_prog_cc_stdc" ;; +esac + +# Some people use a C++ compiler to compile C. Since we use `exit', +# in C++ we need to declare it. In case someone uses the same compiler +# for both compiling C and C++ we need to have the C++ compiler decide +# the declaration of exit, since it's the most demanding environment. +cat >conftest.$ac_ext <<_ACEOF +#ifndef __cplusplus + choke me +#endif +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + for ac_declaration in \ + ''\ + '#include ' \ + 'extern "C" void std::exit (int) throw (); using std::exit;' \ + 'extern "C" void std::exit (int); using std::exit;' \ + 'extern "C" void exit (int) throw ();' \ + 'extern "C" void exit (int);' \ + 'void exit (int);' +do + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +$ac_declaration +int +main () +{ +exit (42); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + : +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +continue +fi +rm -f conftest.$ac_objext conftest.$ac_ext + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_declaration +int +main () +{ +exit (42); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + break +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +fi +rm -f conftest.$ac_objext conftest.$ac_ext +done +rm -f conftest* +if test -n "$ac_declaration"; then + echo '#ifdef __cplusplus' >>confdefs.h + echo $ac_declaration >>confdefs.h + echo '#endif' >>confdefs.h +fi + +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +fi +rm -f conftest.$ac_objext conftest.$ac_ext +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5 +echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6 +# On Suns, sometimes $CPP names a directory. +if test -n "$CPP" && test -d "$CPP"; then + CPP= +fi +if test -z "$CPP"; then + if test "${ac_cv_prog_CPP+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + # Double quotes because CPP needs to be expanded + for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" + do + ac_preproc_ok=false +for ac_c_preproc_warn_flag in '' yes +do + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer to if __STDC__ is defined, since + # exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#ifdef __STDC__ +# include +#else +# include +#endif + Syntax error +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + : +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + # Broken: fails on valid input. +continue +fi +rm -f conftest.err conftest.$ac_ext + + # OK, works on sane cases. Now check whether non-existent headers + # can be detected and how. + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + # Broken: success on invalid input. +continue +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + # Passes both tests. +ac_preproc_ok=: +break +fi +rm -f conftest.err conftest.$ac_ext + +done +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.err conftest.$ac_ext +if $ac_preproc_ok; then + break +fi + + done + ac_cv_prog_CPP=$CPP + +fi + CPP=$ac_cv_prog_CPP +else + ac_cv_prog_CPP=$CPP +fi +echo "$as_me:$LINENO: result: $CPP" >&5 +echo "${ECHO_T}$CPP" >&6 +ac_preproc_ok=false +for ac_c_preproc_warn_flag in '' yes +do + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer to if __STDC__ is defined, since + # exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#ifdef __STDC__ +# include +#else +# include +#endif + Syntax error +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + : +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + # Broken: fails on valid input. +continue +fi +rm -f conftest.err conftest.$ac_ext + + # OK, works on sane cases. Now check whether non-existent headers + # can be detected and how. + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + # Broken: success on invalid input. +continue +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + # Passes both tests. +ac_preproc_ok=: +break +fi +rm -f conftest.err conftest.$ac_ext + +done +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.err conftest.$ac_ext +if $ac_preproc_ok; then + : +else + { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check +See \`config.log' for more details." >&5 +echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } +fi + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + + # Find a good install program. We prefer a C program (faster), +# so one script is as good as another. But avoid the broken or +# incompatible versions: +# SysV /etc/install, /usr/sbin/install +# SunOS /usr/etc/install +# IRIX /sbin/install +# AIX /bin/install +# AmigaOS /C/install, which installs bootblocks on floppy discs +# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag +# AFS /usr/afsws/bin/install, which mishandles nonexistent args +# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" +# ./install, which can be erroneously created by make from ./install.sh. +echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 +echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6 +if test -z "$INSTALL"; then +if test "${ac_cv_path_install+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + # Account for people who put trailing slashes in PATH elements. +case $as_dir/ in + ./ | .// | /cC/* | \ + /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ + /usr/ucb/* ) ;; + *) + # OSF1 and SCO ODT 3.0 have their own names for install. + # Don't use installbsd from OSF since it installs stuff as root + # by default. + for ac_prog in ginstall scoinst install; do + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then + if test $ac_prog = install && + grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # AIX install. It has an incompatible calling convention. + : + elif test $ac_prog = install && + grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # program-specific install script used by HP pwplus--don't use. + : + else + ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" + break 3 + fi + fi + done + done + ;; +esac +done + + +fi + if test "${ac_cv_path_install+set}" = set; then + INSTALL=$ac_cv_path_install + else + # As a last resort, use the slow shell script. We don't cache a + # path for INSTALL within a source directory, because that will + # break other packages using the cache if that directory is + # removed, or if the path is relative. + INSTALL=$ac_install_sh + fi +fi +echo "$as_me:$LINENO: result: $INSTALL" >&5 +echo "${ECHO_T}$INSTALL" >&6 + +# Use test -z because SunOS4 sh mishandles braces in ${var-val}. +# It thinks the first close brace ends the variable substitution. +test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' + +test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' + +test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' + + + #-------------------------------------------------------------------- + # Checks to see if the make program sets the $MAKE variable. + #-------------------------------------------------------------------- + + echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 +echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6 +set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,./+-,__p_,'` +if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.make <<\_ACEOF +all: + @echo 'ac_maketemp="$(MAKE)"' +_ACEOF +# GNU make sometimes prints "make[1]: Entering...", which would confuse us. +eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=` +if test -n "$ac_maketemp"; then + eval ac_cv_prog_make_${ac_make}_set=yes +else + eval ac_cv_prog_make_${ac_make}_set=no +fi +rm -f conftest.make +fi +if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then + echo "$as_me:$LINENO: result: yes" >&5 +echo "${ECHO_T}yes" >&6 + SET_MAKE= +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 + SET_MAKE="MAKE=${MAKE-make}" +fi + + + #-------------------------------------------------------------------- + # Find ranlib + #-------------------------------------------------------------------- + + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. +set dummy ${ac_tool_prefix}ranlib; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_RANLIB+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$RANLIB"; then + ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +RANLIB=$ac_cv_prog_RANLIB +if test -n "$RANLIB"; then + echo "$as_me:$LINENO: result: $RANLIB" >&5 +echo "${ECHO_T}$RANLIB" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + +fi +if test -z "$ac_cv_prog_RANLIB"; then + ac_ct_RANLIB=$RANLIB + # Extract the first word of "ranlib", so it can be a program name with args. +set dummy ranlib; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$ac_ct_RANLIB"; then + ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_RANLIB="ranlib" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + + test -z "$ac_cv_prog_ac_ct_RANLIB" && ac_cv_prog_ac_ct_RANLIB=":" +fi +fi +ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB +if test -n "$ac_ct_RANLIB"; then + echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5 +echo "${ECHO_T}$ac_ct_RANLIB" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + RANLIB=$ac_ct_RANLIB +else + RANLIB="$ac_cv_prog_RANLIB" +fi + + + #-------------------------------------------------------------------- + # Determines the correct binary file extension (.o, .obj, .exe etc.) + #-------------------------------------------------------------------- + + + + + + +echo "$as_me:$LINENO: checking for egrep" >&5 +echo $ECHO_N "checking for egrep... $ECHO_C" >&6 +if test "${ac_cv_prog_egrep+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if echo a | (grep -E '(a|b)') >/dev/null 2>&1 + then ac_cv_prog_egrep='grep -E' + else ac_cv_prog_egrep='egrep' + fi +fi +echo "$as_me:$LINENO: result: $ac_cv_prog_egrep" >&5 +echo "${ECHO_T}$ac_cv_prog_egrep" >&6 + EGREP=$ac_cv_prog_egrep + + +echo "$as_me:$LINENO: checking for ANSI C header files" >&5 +echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6 +if test "${ac_cv_header_stdc+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +#include +#include +#include + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_header_stdc=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_header_stdc=no +fi +rm -f conftest.$ac_objext conftest.$ac_ext + +if test $ac_cv_header_stdc = yes; then + # SunOS 4.x string.h does not declare mem*, contrary to ANSI. + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "memchr" >/dev/null 2>&1; then + : +else + ac_cv_header_stdc=no +fi +rm -f conftest* + +fi + +if test $ac_cv_header_stdc = yes; then + # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "free" >/dev/null 2>&1; then + : +else + ac_cv_header_stdc=no +fi +rm -f conftest* + +fi + +if test $ac_cv_header_stdc = yes; then + # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. + if test "$cross_compiling" = yes; then + : +else + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +#if ((' ' & 0x0FF) == 0x020) +# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') +# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) +#else +# define ISLOWER(c) \ + (('a' <= (c) && (c) <= 'i') \ + || ('j' <= (c) && (c) <= 'r') \ + || ('s' <= (c) && (c) <= 'z')) +# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) +#endif + +#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) +int +main () +{ + int i; + for (i = 0; i < 256; i++) + if (XOR (islower (i), ISLOWER (i)) + || toupper (i) != TOUPPER (i)) + exit(2); + exit (0); +} +_ACEOF +rm -f conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { ac_try='./conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + : +else + echo "$as_me: program exited with status $ac_status" >&5 +echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +( exit $ac_status ) +ac_cv_header_stdc=no +fi +rm -f core core.* *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +fi +fi +fi +echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 +echo "${ECHO_T}$ac_cv_header_stdc" >&6 +if test $ac_cv_header_stdc = yes; then + +cat >>confdefs.h <<\_ACEOF +#define STDC_HEADERS 1 +_ACEOF + +fi + +# On IRIX 5.3, sys/types and inttypes.h are conflicting. + + + + + + + + + +for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ + inttypes.h stdint.h unistd.h +do +as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` +echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 +if eval "test \"\${$as_ac_Header+set}\" = set"; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default + +#include <$ac_header> +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + eval "$as_ac_Header=yes" +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +eval "$as_ac_Header=no" +fi +rm -f conftest.$ac_objext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 +if test `eval echo '${'$as_ac_Header'}'` = yes; then + cat >>confdefs.h <<_ACEOF +#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF + +fi + +done + + + + # Any macros that use the compiler (e.g. AC_TRY_COMPILE) have to go here. + + + #------------------------------------------------------------------------ + # If we're using GCC, see if the compiler understands -pipe. If so, use it. + # It makes compiling go faster. (This is only a performance feature.) + #------------------------------------------------------------------------ + + if test -z "$no_pipe" -a -n "$GCC"; then + echo "$as_me:$LINENO: checking if the compiler understands -pipe" >&5 +echo $ECHO_N "checking if the compiler understands -pipe... $ECHO_C" >&6 + OLDCC="$CC" + CC="$CC -pipe" + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + echo "$as_me:$LINENO: result: yes" >&5 +echo "${ECHO_T}yes" >&6 +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +CC="$OLDCC" + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi +rm -f conftest.$ac_objext conftest.$ac_ext + fi + + #-------------------------------------------------------------------- + # Common compiler flag setup + #-------------------------------------------------------------------- + + + echo "$as_me:$LINENO: checking for required early compiler flags" >&5 +echo $ECHO_N "checking for required early compiler flags... $ECHO_C" >&6 + tcl_flags="" + + if test "${tcl_cv_flag__isoc99_source+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +int +main () +{ +char *p = (char *)strtoll; char *q = (char *)strtoull; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + tcl_cv_flag__isoc99_source=no +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#define _ISOC99_SOURCE 1 +#include +int +main () +{ +char *p = (char *)strtoll; char *q = (char *)strtoull; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + tcl_cv_flag__isoc99_source=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +tcl_cv_flag__isoc99_source=no +fi +rm -f conftest.$ac_objext conftest.$ac_ext +fi +rm -f conftest.$ac_objext conftest.$ac_ext +fi + + if test "x${tcl_cv_flag__isoc99_source}" = "xyes" ; then + cat >>confdefs.h <<\_ACEOF +#define _ISOC99_SOURCE 1 +_ACEOF + + tcl_flags="$tcl_flags _ISOC99_SOURCE" + fi + + + if test "${tcl_cv_flag__largefile64_source+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +int +main () +{ +struct stat64 buf; int i = stat64("/", &buf); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + tcl_cv_flag__largefile64_source=no +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#define _LARGEFILE64_SOURCE 1 +#include +int +main () +{ +struct stat64 buf; int i = stat64("/", &buf); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + tcl_cv_flag__largefile64_source=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +tcl_cv_flag__largefile64_source=no +fi +rm -f conftest.$ac_objext conftest.$ac_ext +fi +rm -f conftest.$ac_objext conftest.$ac_ext +fi + + if test "x${tcl_cv_flag__largefile64_source}" = "xyes" ; then + cat >>confdefs.h <<\_ACEOF +#define _LARGEFILE64_SOURCE 1 +_ACEOF + + tcl_flags="$tcl_flags _LARGEFILE64_SOURCE" + fi + + if test "x${tcl_flags}" = "x" ; then + echo "$as_me:$LINENO: result: none" >&5 +echo "${ECHO_T}none" >&6 + else + echo "$as_me:$LINENO: result: ${tcl_flags}" >&5 +echo "${ECHO_T}${tcl_flags}" >&6 + fi + + + echo "$as_me:$LINENO: checking for 64-bit integer type" >&5 +echo $ECHO_N "checking for 64-bit integer type... $ECHO_C" >&6 + if test "${tcl_cv_type_64bit+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ +__int64 value = (__int64) 0; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + tcl_cv_type_64bit=__int64 +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +tcl_cv_type_64bit=none + if test "$cross_compiling" = yes; then + { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling +See \`config.log' for more details." >&5 +echo "$as_me: error: cannot run test program while cross compiling +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } +else + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include + int main() {exit(!(sizeof(long long) > sizeof(long)));} + +_ACEOF +rm -f conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { ac_try='./conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + tcl_cv_type_64bit="long long" +else + echo "$as_me: program exited with status $ac_status" >&5 +echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +fi +rm -f core core.* *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +fi +fi +rm -f conftest.$ac_objext conftest.$ac_ext +fi + + if test "${tcl_cv_type_64bit}" = none ; then + echo "$as_me:$LINENO: result: using long" >&5 +echo "${ECHO_T}using long" >&6 + elif test "${tcl_cv_type_64bit}" = "__int64" ; then + # We actually want to use the default tcl.h checks in this + # case to handle both TCL_WIDE_INT_TYPE and TCL_LL_MODIFIER* + echo "$as_me:$LINENO: result: using Tcl header defaults" >&5 +echo "${ECHO_T}using Tcl header defaults" >&6 + else + cat >>confdefs.h <<_ACEOF +#define TCL_WIDE_INT_TYPE ${tcl_cv_type_64bit} +_ACEOF + + echo "$as_me:$LINENO: result: ${tcl_cv_type_64bit}" >&5 +echo "${ECHO_T}${tcl_cv_type_64bit}" >&6 + + # Now check for auxiliary declarations + echo "$as_me:$LINENO: checking for struct dirent64" >&5 +echo $ECHO_N "checking for struct dirent64... $ECHO_C" >&6 + if test "${tcl_cv_struct_dirent64+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +#include +int +main () +{ +struct dirent64 p; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + tcl_cv_struct_dirent64=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +tcl_cv_struct_dirent64=no +fi +rm -f conftest.$ac_objext conftest.$ac_ext +fi + + if test "x${tcl_cv_struct_dirent64}" = "xyes" ; then + cat >>confdefs.h <<\_ACEOF +#define HAVE_STRUCT_DIRENT64 1 +_ACEOF + + fi + echo "$as_me:$LINENO: result: ${tcl_cv_struct_dirent64}" >&5 +echo "${ECHO_T}${tcl_cv_struct_dirent64}" >&6 + + echo "$as_me:$LINENO: checking for struct stat64" >&5 +echo $ECHO_N "checking for struct stat64... $ECHO_C" >&6 + if test "${tcl_cv_struct_stat64+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +int +main () +{ +struct stat64 p; + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + tcl_cv_struct_stat64=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +tcl_cv_struct_stat64=no +fi +rm -f conftest.$ac_objext conftest.$ac_ext +fi + + if test "x${tcl_cv_struct_stat64}" = "xyes" ; then + cat >>confdefs.h <<\_ACEOF +#define HAVE_STRUCT_STAT64 1 +_ACEOF + + fi + echo "$as_me:$LINENO: result: ${tcl_cv_struct_stat64}" >&5 +echo "${ECHO_T}${tcl_cv_struct_stat64}" >&6 + + echo "$as_me:$LINENO: checking for off64_t" >&5 +echo $ECHO_N "checking for off64_t... $ECHO_C" >&6 + if test "${tcl_cv_type_off64_t+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +int +main () +{ +off64_t offset; + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + tcl_cv_type_off64_t=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +tcl_cv_type_off64_t=no +fi +rm -f conftest.$ac_objext conftest.$ac_ext +fi + + if test "x${tcl_cv_type_off64_t}" = "xyes" ; then + cat >>confdefs.h <<\_ACEOF +#define HAVE_TYPE_OFF64_T 1 +_ACEOF + + fi + echo "$as_me:$LINENO: result: ${tcl_cv_type_off64_t}" >&5 +echo "${ECHO_T}${tcl_cv_type_off64_t}" >&6 + fi + + echo "$as_me:$LINENO: checking whether byte ordering is bigendian" >&5 +echo $ECHO_N "checking whether byte ordering is bigendian... $ECHO_C" >&6 +if test "${ac_cv_c_bigendian+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + # See if sys/param.h defines the BYTE_ORDER macro. +cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +#include + +int +main () +{ +#if !BYTE_ORDER || !BIG_ENDIAN || !LITTLE_ENDIAN + bogus endian macros +#endif + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + # It does; now see whether it defined to BIG_ENDIAN or not. +cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +#include + +int +main () +{ +#if BYTE_ORDER != BIG_ENDIAN + not big endian +#endif + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_c_bigendian=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_c_bigendian=no +fi +rm -f conftest.$ac_objext conftest.$ac_ext +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +# It does not; compile a test program. +if test "$cross_compiling" = yes; then + # try to guess the endianness by grepping values into an object file + ac_cv_c_bigendian=unknown + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +short ascii_mm[] = { 0x4249, 0x4765, 0x6E44, 0x6961, 0x6E53, 0x7953, 0 }; +short ascii_ii[] = { 0x694C, 0x5454, 0x656C, 0x6E45, 0x6944, 0x6E61, 0 }; +void _ascii () { char *s = (char *) ascii_mm; s = (char *) ascii_ii; } +short ebcdic_ii[] = { 0x89D3, 0xE3E3, 0x8593, 0x95C5, 0x89C4, 0x9581, 0 }; +short ebcdic_mm[] = { 0xC2C9, 0xC785, 0x95C4, 0x8981, 0x95E2, 0xA8E2, 0 }; +void _ebcdic () { char *s = (char *) ebcdic_mm; s = (char *) ebcdic_ii; } +int +main () +{ + _ascii (); _ebcdic (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + if grep BIGenDianSyS conftest.$ac_objext >/dev/null ; then + ac_cv_c_bigendian=yes +fi +if grep LiTTleEnDian conftest.$ac_objext >/dev/null ; then + if test "$ac_cv_c_bigendian" = unknown; then + ac_cv_c_bigendian=no + else + # finding both strings is unlikely to happen, but who knows? + ac_cv_c_bigendian=unknown + fi +fi +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +fi +rm -f conftest.$ac_objext conftest.$ac_ext +else + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +int +main () +{ + /* Are we little or big endian? From Harbison&Steele. */ + union + { + long l; + char c[sizeof (long)]; + } u; + u.l = 1; + exit (u.c[sizeof (long) - 1] == 1); +} +_ACEOF +rm -f conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { ac_try='./conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_c_bigendian=no +else + echo "$as_me: program exited with status $ac_status" >&5 +echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +( exit $ac_status ) +ac_cv_c_bigendian=yes +fi +rm -f core core.* *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +fi +fi +rm -f conftest.$ac_objext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_c_bigendian" >&5 +echo "${ECHO_T}$ac_cv_c_bigendian" >&6 +case $ac_cv_c_bigendian in + yes) + +cat >>confdefs.h <<\_ACEOF +#define WORDS_BIGENDIAN 1 +_ACEOF + ;; + no) + ;; + *) + { { echo "$as_me:$LINENO: error: unknown endianness +presetting ac_cv_c_bigendian=no (or yes) will help" >&5 +echo "$as_me: error: unknown endianness +presetting ac_cv_c_bigendian=no (or yes) will help" >&2;} + { (exit 1); exit 1; }; } ;; +esac + + if test "${TEA_PLATFORM}" = "unix" ; then + + #-------------------------------------------------------------------- + # On a few very rare systems, all of the libm.a stuff is + # already in libc.a. Set compiler flags accordingly. + # Also, Linux requires the "ieee" library for math to work + # right (and it must appear before "-lm"). + #-------------------------------------------------------------------- + + echo "$as_me:$LINENO: checking for sin" >&5 +echo $ECHO_N "checking for sin... $ECHO_C" >&6 +if test "${ac_cv_func_sin+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char sin (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ +#ifdef __STDC__ +# include +#else +# include +#endif +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +{ +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char sin (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined (__stub_sin) || defined (__stub___sin) +choke me +#else +char (*f) () = sin; +#endif +#ifdef __cplusplus +} +#endif + +int +main () +{ +return f != sin; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_func_sin=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_func_sin=no +fi +rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_func_sin" >&5 +echo "${ECHO_T}$ac_cv_func_sin" >&6 +if test $ac_cv_func_sin = yes; then + MATH_LIBS="" +else + MATH_LIBS="-lm" +fi + + echo "$as_me:$LINENO: checking for main in -lieee" >&5 +echo $ECHO_N "checking for main in -lieee... $ECHO_C" >&6 +if test "${ac_cv_lib_ieee_main+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lieee $LIBS" +cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + + +int +main () +{ +main (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_lib_ieee_main=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_lib_ieee_main=no +fi +rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +echo "$as_me:$LINENO: result: $ac_cv_lib_ieee_main" >&5 +echo "${ECHO_T}$ac_cv_lib_ieee_main" >&6 +if test $ac_cv_lib_ieee_main = yes; then + MATH_LIBS="-lieee $MATH_LIBS" +fi + + + #-------------------------------------------------------------------- + # Interactive UNIX requires -linet instead of -lsocket, plus it + # needs net/errno.h to define the socket-related error codes. + #-------------------------------------------------------------------- + + echo "$as_me:$LINENO: checking for main in -linet" >&5 +echo $ECHO_N "checking for main in -linet... $ECHO_C" >&6 +if test "${ac_cv_lib_inet_main+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-linet $LIBS" +cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + + +int +main () +{ +main (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_lib_inet_main=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_lib_inet_main=no +fi +rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +echo "$as_me:$LINENO: result: $ac_cv_lib_inet_main" >&5 +echo "${ECHO_T}$ac_cv_lib_inet_main" >&6 +if test $ac_cv_lib_inet_main = yes; then + LIBS="$LIBS -linet" +fi + + if test "${ac_cv_header_net_errno_h+set}" = set; then + echo "$as_me:$LINENO: checking for net/errno.h" >&5 +echo $ECHO_N "checking for net/errno.h... $ECHO_C" >&6 +if test "${ac_cv_header_net_errno_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +fi +echo "$as_me:$LINENO: result: $ac_cv_header_net_errno_h" >&5 +echo "${ECHO_T}$ac_cv_header_net_errno_h" >&6 +else + # Is the header compilable? +echo "$as_me:$LINENO: checking net/errno.h usability" >&5 +echo $ECHO_N "checking net/errno.h usability... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +#include +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_header_compiler=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_header_compiler=no +fi +rm -f conftest.$ac_objext conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +echo "${ECHO_T}$ac_header_compiler" >&6 + +# Is the header present? +echo "$as_me:$LINENO: checking net/errno.h presence" >&5 +echo $ECHO_N "checking net/errno.h presence... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + ac_header_preproc=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no +fi +rm -f conftest.err conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +echo "${ECHO_T}$ac_header_preproc" >&6 + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc in + yes:no ) + { echo "$as_me:$LINENO: WARNING: net/errno.h: accepted by the compiler, rejected by the preprocessor!" >&5 +echo "$as_me: WARNING: net/errno.h: accepted by the compiler, rejected by the preprocessor!" >&2;} + { echo "$as_me:$LINENO: WARNING: net/errno.h: proceeding with the preprocessor's result" >&5 +echo "$as_me: WARNING: net/errno.h: proceeding with the preprocessor's result" >&2;} + ( + cat <<\_ASBOX +## ------------------------------------ ## +## Report this to bug-autoconf@gnu.org. ## +## ------------------------------------ ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; + no:yes ) + { echo "$as_me:$LINENO: WARNING: net/errno.h: present but cannot be compiled" >&5 +echo "$as_me: WARNING: net/errno.h: present but cannot be compiled" >&2;} + { echo "$as_me:$LINENO: WARNING: net/errno.h: check for missing prerequisite headers?" >&5 +echo "$as_me: WARNING: net/errno.h: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: net/errno.h: proceeding with the preprocessor's result" >&5 +echo "$as_me: WARNING: net/errno.h: proceeding with the preprocessor's result" >&2;} + ( + cat <<\_ASBOX +## ------------------------------------ ## +## Report this to bug-autoconf@gnu.org. ## +## ------------------------------------ ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; +esac +echo "$as_me:$LINENO: checking for net/errno.h" >&5 +echo $ECHO_N "checking for net/errno.h... $ECHO_C" >&6 +if test "${ac_cv_header_net_errno_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_cv_header_net_errno_h=$ac_header_preproc +fi +echo "$as_me:$LINENO: result: $ac_cv_header_net_errno_h" >&5 +echo "${ECHO_T}$ac_cv_header_net_errno_h" >&6 + +fi +if test $ac_cv_header_net_errno_h = yes; then + cat >>confdefs.h <<\_ACEOF +#define HAVE_NET_ERRNO_H 1 +_ACEOF + +fi + + + + #-------------------------------------------------------------------- + # Check for the existence of the -lsocket and -lnsl libraries. + # The order here is important, so that they end up in the right + # order in the command line generated by make. Here are some + # special considerations: + # 1. Use "connect" and "accept" to check for -lsocket, and + # "gethostbyname" to check for -lnsl. + # 2. Use each function name only once: can't redo a check because + # autoconf caches the results of the last check and won't redo it. + # 3. Use -lnsl and -lsocket only if they supply procedures that + # aren't already present in the normal libraries. This is because + # IRIX 5.2 has libraries, but they aren't needed and they're + # bogus: they goof up name resolution if used. + # 4. On some SVR4 systems, can't use -lsocket without -lnsl too. + # To get around this problem, check for both libraries together + # if -lsocket doesn't work by itself. + #-------------------------------------------------------------------- + + tcl_checkBoth=0 + echo "$as_me:$LINENO: checking for connect" >&5 +echo $ECHO_N "checking for connect... $ECHO_C" >&6 +if test "${ac_cv_func_connect+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char connect (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ +#ifdef __STDC__ +# include +#else +# include +#endif +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +{ +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char connect (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined (__stub_connect) || defined (__stub___connect) +choke me +#else +char (*f) () = connect; +#endif +#ifdef __cplusplus +} +#endif + +int +main () +{ +return f != connect; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_func_connect=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_func_connect=no +fi +rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_func_connect" >&5 +echo "${ECHO_T}$ac_cv_func_connect" >&6 +if test $ac_cv_func_connect = yes; then + tcl_checkSocket=0 +else + tcl_checkSocket=1 +fi + + if test "$tcl_checkSocket" = 1; then + echo "$as_me:$LINENO: checking for setsockopt" >&5 +echo $ECHO_N "checking for setsockopt... $ECHO_C" >&6 +if test "${ac_cv_func_setsockopt+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char setsockopt (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ +#ifdef __STDC__ +# include +#else +# include +#endif +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +{ +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char setsockopt (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined (__stub_setsockopt) || defined (__stub___setsockopt) +choke me +#else +char (*f) () = setsockopt; +#endif +#ifdef __cplusplus +} +#endif + +int +main () +{ +return f != setsockopt; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_func_setsockopt=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_func_setsockopt=no +fi +rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_func_setsockopt" >&5 +echo "${ECHO_T}$ac_cv_func_setsockopt" >&6 +if test $ac_cv_func_setsockopt = yes; then + : +else + echo "$as_me:$LINENO: checking for setsockopt in -lsocket" >&5 +echo $ECHO_N "checking for setsockopt in -lsocket... $ECHO_C" >&6 +if test "${ac_cv_lib_socket_setsockopt+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lsocket $LIBS" +cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char setsockopt (); +int +main () +{ +setsockopt (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_lib_socket_setsockopt=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_lib_socket_setsockopt=no +fi +rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +echo "$as_me:$LINENO: result: $ac_cv_lib_socket_setsockopt" >&5 +echo "${ECHO_T}$ac_cv_lib_socket_setsockopt" >&6 +if test $ac_cv_lib_socket_setsockopt = yes; then + LIBS="$LIBS -lsocket" +else + tcl_checkBoth=1 +fi + +fi + + fi + if test "$tcl_checkBoth" = 1; then + tk_oldLibs=$LIBS + LIBS="$LIBS -lsocket -lnsl" + echo "$as_me:$LINENO: checking for accept" >&5 +echo $ECHO_N "checking for accept... $ECHO_C" >&6 +if test "${ac_cv_func_accept+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char accept (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ +#ifdef __STDC__ +# include +#else +# include +#endif +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +{ +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char accept (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined (__stub_accept) || defined (__stub___accept) +choke me +#else +char (*f) () = accept; +#endif +#ifdef __cplusplus +} +#endif + +int +main () +{ +return f != accept; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_func_accept=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_func_accept=no +fi +rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_func_accept" >&5 +echo "${ECHO_T}$ac_cv_func_accept" >&6 +if test $ac_cv_func_accept = yes; then + tcl_checkNsl=0 +else + LIBS=$tk_oldLibs +fi + + fi + echo "$as_me:$LINENO: checking for gethostbyname" >&5 +echo $ECHO_N "checking for gethostbyname... $ECHO_C" >&6 +if test "${ac_cv_func_gethostbyname+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char gethostbyname (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ +#ifdef __STDC__ +# include +#else +# include +#endif +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +{ +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char gethostbyname (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined (__stub_gethostbyname) || defined (__stub___gethostbyname) +choke me +#else +char (*f) () = gethostbyname; +#endif +#ifdef __cplusplus +} +#endif + +int +main () +{ +return f != gethostbyname; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_func_gethostbyname=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_func_gethostbyname=no +fi +rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $ac_cv_func_gethostbyname" >&5 +echo "${ECHO_T}$ac_cv_func_gethostbyname" >&6 +if test $ac_cv_func_gethostbyname = yes; then + : +else + echo "$as_me:$LINENO: checking for gethostbyname in -lnsl" >&5 +echo $ECHO_N "checking for gethostbyname in -lnsl... $ECHO_C" >&6 +if test "${ac_cv_lib_nsl_gethostbyname+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lnsl $LIBS" +cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char gethostbyname (); +int +main () +{ +gethostbyname (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_lib_nsl_gethostbyname=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_lib_nsl_gethostbyname=no +fi +rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +echo "$as_me:$LINENO: result: $ac_cv_lib_nsl_gethostbyname" >&5 +echo "${ECHO_T}$ac_cv_lib_nsl_gethostbyname" >&6 +if test $ac_cv_lib_nsl_gethostbyname = yes; then + LIBS="$LIBS -lnsl" +fi + +fi + + + # Don't perform the eval of the libraries here because DL_LIBS + # won't be set until we call TEA_CONFIG_CFLAGS + + TCL_LIBS='${DL_LIBS} ${LIBS} ${MATH_LIBS}' + + + + + echo "$as_me:$LINENO: checking dirent.h" >&5 +echo $ECHO_N "checking dirent.h... $ECHO_C" >&6 + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +#include +int +main () +{ + +#ifndef _POSIX_SOURCE +# ifdef __Lynx__ + /* + * Generate compilation error to make the test fail: Lynx headers + * are only valid if really in the POSIX environment. + */ + + missing_procedure(); +# endif +#endif +DIR *d; +struct dirent *entryPtr; +char *p; +d = opendir("foobar"); +entryPtr = readdir(d); +p = entryPtr->d_name; +closedir(d); + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + tcl_ok=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +tcl_ok=no +fi +rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext + + if test $tcl_ok = no; then + cat >>confdefs.h <<\_ACEOF +#define NO_DIRENT_H 1 +_ACEOF + + fi + + echo "$as_me:$LINENO: result: $tcl_ok" >&5 +echo "${ECHO_T}$tcl_ok" >&6 + if test "${ac_cv_header_errno_h+set}" = set; then + echo "$as_me:$LINENO: checking for errno.h" >&5 +echo $ECHO_N "checking for errno.h... $ECHO_C" >&6 +if test "${ac_cv_header_errno_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +fi +echo "$as_me:$LINENO: result: $ac_cv_header_errno_h" >&5 +echo "${ECHO_T}$ac_cv_header_errno_h" >&6 +else + # Is the header compilable? +echo "$as_me:$LINENO: checking errno.h usability" >&5 +echo $ECHO_N "checking errno.h usability... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +#include +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_header_compiler=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_header_compiler=no +fi +rm -f conftest.$ac_objext conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +echo "${ECHO_T}$ac_header_compiler" >&6 + +# Is the header present? +echo "$as_me:$LINENO: checking errno.h presence" >&5 +echo $ECHO_N "checking errno.h presence... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + ac_header_preproc=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no +fi +rm -f conftest.err conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +echo "${ECHO_T}$ac_header_preproc" >&6 + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc in + yes:no ) + { echo "$as_me:$LINENO: WARNING: errno.h: accepted by the compiler, rejected by the preprocessor!" >&5 +echo "$as_me: WARNING: errno.h: accepted by the compiler, rejected by the preprocessor!" >&2;} + { echo "$as_me:$LINENO: WARNING: errno.h: proceeding with the preprocessor's result" >&5 +echo "$as_me: WARNING: errno.h: proceeding with the preprocessor's result" >&2;} + ( + cat <<\_ASBOX +## ------------------------------------ ## +## Report this to bug-autoconf@gnu.org. ## +## ------------------------------------ ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; + no:yes ) + { echo "$as_me:$LINENO: WARNING: errno.h: present but cannot be compiled" >&5 +echo "$as_me: WARNING: errno.h: present but cannot be compiled" >&2;} + { echo "$as_me:$LINENO: WARNING: errno.h: check for missing prerequisite headers?" >&5 +echo "$as_me: WARNING: errno.h: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: errno.h: proceeding with the preprocessor's result" >&5 +echo "$as_me: WARNING: errno.h: proceeding with the preprocessor's result" >&2;} + ( + cat <<\_ASBOX +## ------------------------------------ ## +## Report this to bug-autoconf@gnu.org. ## +## ------------------------------------ ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; +esac +echo "$as_me:$LINENO: checking for errno.h" >&5 +echo $ECHO_N "checking for errno.h... $ECHO_C" >&6 +if test "${ac_cv_header_errno_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_cv_header_errno_h=$ac_header_preproc +fi +echo "$as_me:$LINENO: result: $ac_cv_header_errno_h" >&5 +echo "${ECHO_T}$ac_cv_header_errno_h" >&6 + +fi +if test $ac_cv_header_errno_h = yes; then + : +else + cat >>confdefs.h <<\_ACEOF +#define NO_ERRNO_H 1 +_ACEOF + +fi + + + if test "${ac_cv_header_float_h+set}" = set; then + echo "$as_me:$LINENO: checking for float.h" >&5 +echo $ECHO_N "checking for float.h... $ECHO_C" >&6 +if test "${ac_cv_header_float_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +fi +echo "$as_me:$LINENO: result: $ac_cv_header_float_h" >&5 +echo "${ECHO_T}$ac_cv_header_float_h" >&6 +else + # Is the header compilable? +echo "$as_me:$LINENO: checking float.h usability" >&5 +echo $ECHO_N "checking float.h usability... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +#include +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_header_compiler=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_header_compiler=no +fi +rm -f conftest.$ac_objext conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +echo "${ECHO_T}$ac_header_compiler" >&6 + +# Is the header present? +echo "$as_me:$LINENO: checking float.h presence" >&5 +echo $ECHO_N "checking float.h presence... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + ac_header_preproc=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no +fi +rm -f conftest.err conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +echo "${ECHO_T}$ac_header_preproc" >&6 + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc in + yes:no ) + { echo "$as_me:$LINENO: WARNING: float.h: accepted by the compiler, rejected by the preprocessor!" >&5 +echo "$as_me: WARNING: float.h: accepted by the compiler, rejected by the preprocessor!" >&2;} + { echo "$as_me:$LINENO: WARNING: float.h: proceeding with the preprocessor's result" >&5 +echo "$as_me: WARNING: float.h: proceeding with the preprocessor's result" >&2;} + ( + cat <<\_ASBOX +## ------------------------------------ ## +## Report this to bug-autoconf@gnu.org. ## +## ------------------------------------ ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; + no:yes ) + { echo "$as_me:$LINENO: WARNING: float.h: present but cannot be compiled" >&5 +echo "$as_me: WARNING: float.h: present but cannot be compiled" >&2;} + { echo "$as_me:$LINENO: WARNING: float.h: check for missing prerequisite headers?" >&5 +echo "$as_me: WARNING: float.h: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: float.h: proceeding with the preprocessor's result" >&5 +echo "$as_me: WARNING: float.h: proceeding with the preprocessor's result" >&2;} + ( + cat <<\_ASBOX +## ------------------------------------ ## +## Report this to bug-autoconf@gnu.org. ## +## ------------------------------------ ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; +esac +echo "$as_me:$LINENO: checking for float.h" >&5 +echo $ECHO_N "checking for float.h... $ECHO_C" >&6 +if test "${ac_cv_header_float_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_cv_header_float_h=$ac_header_preproc +fi +echo "$as_me:$LINENO: result: $ac_cv_header_float_h" >&5 +echo "${ECHO_T}$ac_cv_header_float_h" >&6 + +fi +if test $ac_cv_header_float_h = yes; then + : +else + cat >>confdefs.h <<\_ACEOF +#define NO_FLOAT_H 1 +_ACEOF + +fi + + + if test "${ac_cv_header_values_h+set}" = set; then + echo "$as_me:$LINENO: checking for values.h" >&5 +echo $ECHO_N "checking for values.h... $ECHO_C" >&6 +if test "${ac_cv_header_values_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +fi +echo "$as_me:$LINENO: result: $ac_cv_header_values_h" >&5 +echo "${ECHO_T}$ac_cv_header_values_h" >&6 +else + # Is the header compilable? +echo "$as_me:$LINENO: checking values.h usability" >&5 +echo $ECHO_N "checking values.h usability... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +#include +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_header_compiler=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_header_compiler=no +fi +rm -f conftest.$ac_objext conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +echo "${ECHO_T}$ac_header_compiler" >&6 + +# Is the header present? +echo "$as_me:$LINENO: checking values.h presence" >&5 +echo $ECHO_N "checking values.h presence... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + ac_header_preproc=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no +fi +rm -f conftest.err conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +echo "${ECHO_T}$ac_header_preproc" >&6 + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc in + yes:no ) + { echo "$as_me:$LINENO: WARNING: values.h: accepted by the compiler, rejected by the preprocessor!" >&5 +echo "$as_me: WARNING: values.h: accepted by the compiler, rejected by the preprocessor!" >&2;} + { echo "$as_me:$LINENO: WARNING: values.h: proceeding with the preprocessor's result" >&5 +echo "$as_me: WARNING: values.h: proceeding with the preprocessor's result" >&2;} + ( + cat <<\_ASBOX +## ------------------------------------ ## +## Report this to bug-autoconf@gnu.org. ## +## ------------------------------------ ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; + no:yes ) + { echo "$as_me:$LINENO: WARNING: values.h: present but cannot be compiled" >&5 +echo "$as_me: WARNING: values.h: present but cannot be compiled" >&2;} + { echo "$as_me:$LINENO: WARNING: values.h: check for missing prerequisite headers?" >&5 +echo "$as_me: WARNING: values.h: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: values.h: proceeding with the preprocessor's result" >&5 +echo "$as_me: WARNING: values.h: proceeding with the preprocessor's result" >&2;} + ( + cat <<\_ASBOX +## ------------------------------------ ## +## Report this to bug-autoconf@gnu.org. ## +## ------------------------------------ ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; +esac +echo "$as_me:$LINENO: checking for values.h" >&5 +echo $ECHO_N "checking for values.h... $ECHO_C" >&6 +if test "${ac_cv_header_values_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_cv_header_values_h=$ac_header_preproc +fi +echo "$as_me:$LINENO: result: $ac_cv_header_values_h" >&5 +echo "${ECHO_T}$ac_cv_header_values_h" >&6 + +fi +if test $ac_cv_header_values_h = yes; then + : +else + cat >>confdefs.h <<\_ACEOF +#define NO_VALUES_H 1 +_ACEOF + +fi + + + if test "${ac_cv_header_limits_h+set}" = set; then + echo "$as_me:$LINENO: checking for limits.h" >&5 +echo $ECHO_N "checking for limits.h... $ECHO_C" >&6 +if test "${ac_cv_header_limits_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +fi +echo "$as_me:$LINENO: result: $ac_cv_header_limits_h" >&5 +echo "${ECHO_T}$ac_cv_header_limits_h" >&6 +else + # Is the header compilable? +echo "$as_me:$LINENO: checking limits.h usability" >&5 +echo $ECHO_N "checking limits.h usability... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +#include +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_header_compiler=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_header_compiler=no +fi +rm -f conftest.$ac_objext conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +echo "${ECHO_T}$ac_header_compiler" >&6 + +# Is the header present? +echo "$as_me:$LINENO: checking limits.h presence" >&5 +echo $ECHO_N "checking limits.h presence... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + ac_header_preproc=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no +fi +rm -f conftest.err conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +echo "${ECHO_T}$ac_header_preproc" >&6 + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc in + yes:no ) + { echo "$as_me:$LINENO: WARNING: limits.h: accepted by the compiler, rejected by the preprocessor!" >&5 +echo "$as_me: WARNING: limits.h: accepted by the compiler, rejected by the preprocessor!" >&2;} + { echo "$as_me:$LINENO: WARNING: limits.h: proceeding with the preprocessor's result" >&5 +echo "$as_me: WARNING: limits.h: proceeding with the preprocessor's result" >&2;} + ( + cat <<\_ASBOX +## ------------------------------------ ## +## Report this to bug-autoconf@gnu.org. ## +## ------------------------------------ ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; + no:yes ) + { echo "$as_me:$LINENO: WARNING: limits.h: present but cannot be compiled" >&5 +echo "$as_me: WARNING: limits.h: present but cannot be compiled" >&2;} + { echo "$as_me:$LINENO: WARNING: limits.h: check for missing prerequisite headers?" >&5 +echo "$as_me: WARNING: limits.h: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: limits.h: proceeding with the preprocessor's result" >&5 +echo "$as_me: WARNING: limits.h: proceeding with the preprocessor's result" >&2;} + ( + cat <<\_ASBOX +## ------------------------------------ ## +## Report this to bug-autoconf@gnu.org. ## +## ------------------------------------ ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; +esac +echo "$as_me:$LINENO: checking for limits.h" >&5 +echo $ECHO_N "checking for limits.h... $ECHO_C" >&6 +if test "${ac_cv_header_limits_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_cv_header_limits_h=$ac_header_preproc +fi +echo "$as_me:$LINENO: result: $ac_cv_header_limits_h" >&5 +echo "${ECHO_T}$ac_cv_header_limits_h" >&6 + +fi +if test $ac_cv_header_limits_h = yes; then + : +else + cat >>confdefs.h <<\_ACEOF +#define NO_LIMITS_H 1 +_ACEOF + +fi + + + if test "${ac_cv_header_stdlib_h+set}" = set; then + echo "$as_me:$LINENO: checking for stdlib.h" >&5 +echo $ECHO_N "checking for stdlib.h... $ECHO_C" >&6 +if test "${ac_cv_header_stdlib_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +fi +echo "$as_me:$LINENO: result: $ac_cv_header_stdlib_h" >&5 +echo "${ECHO_T}$ac_cv_header_stdlib_h" >&6 +else + # Is the header compilable? +echo "$as_me:$LINENO: checking stdlib.h usability" >&5 +echo $ECHO_N "checking stdlib.h usability... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +#include +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_header_compiler=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_header_compiler=no +fi +rm -f conftest.$ac_objext conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +echo "${ECHO_T}$ac_header_compiler" >&6 + +# Is the header present? +echo "$as_me:$LINENO: checking stdlib.h presence" >&5 +echo $ECHO_N "checking stdlib.h presence... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + ac_header_preproc=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no +fi +rm -f conftest.err conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +echo "${ECHO_T}$ac_header_preproc" >&6 + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc in + yes:no ) + { echo "$as_me:$LINENO: WARNING: stdlib.h: accepted by the compiler, rejected by the preprocessor!" >&5 +echo "$as_me: WARNING: stdlib.h: accepted by the compiler, rejected by the preprocessor!" >&2;} + { echo "$as_me:$LINENO: WARNING: stdlib.h: proceeding with the preprocessor's result" >&5 +echo "$as_me: WARNING: stdlib.h: proceeding with the preprocessor's result" >&2;} + ( + cat <<\_ASBOX +## ------------------------------------ ## +## Report this to bug-autoconf@gnu.org. ## +## ------------------------------------ ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; + no:yes ) + { echo "$as_me:$LINENO: WARNING: stdlib.h: present but cannot be compiled" >&5 +echo "$as_me: WARNING: stdlib.h: present but cannot be compiled" >&2;} + { echo "$as_me:$LINENO: WARNING: stdlib.h: check for missing prerequisite headers?" >&5 +echo "$as_me: WARNING: stdlib.h: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: stdlib.h: proceeding with the preprocessor's result" >&5 +echo "$as_me: WARNING: stdlib.h: proceeding with the preprocessor's result" >&2;} + ( + cat <<\_ASBOX +## ------------------------------------ ## +## Report this to bug-autoconf@gnu.org. ## +## ------------------------------------ ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; +esac +echo "$as_me:$LINENO: checking for stdlib.h" >&5 +echo $ECHO_N "checking for stdlib.h... $ECHO_C" >&6 +if test "${ac_cv_header_stdlib_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_cv_header_stdlib_h=$ac_header_preproc +fi +echo "$as_me:$LINENO: result: $ac_cv_header_stdlib_h" >&5 +echo "${ECHO_T}$ac_cv_header_stdlib_h" >&6 + +fi +if test $ac_cv_header_stdlib_h = yes; then + tcl_ok=1 +else + tcl_ok=0 +fi + + + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "strtol" >/dev/null 2>&1; then + : +else + tcl_ok=0 +fi +rm -f conftest* + + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "strtoul" >/dev/null 2>&1; then + : +else + tcl_ok=0 +fi +rm -f conftest* + + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "strtod" >/dev/null 2>&1; then + : +else + tcl_ok=0 +fi +rm -f conftest* + + if test $tcl_ok = 0; then + cat >>confdefs.h <<\_ACEOF +#define NO_STDLIB_H 1 +_ACEOF + + fi + if test "${ac_cv_header_string_h+set}" = set; then + echo "$as_me:$LINENO: checking for string.h" >&5 +echo $ECHO_N "checking for string.h... $ECHO_C" >&6 +if test "${ac_cv_header_string_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +fi +echo "$as_me:$LINENO: result: $ac_cv_header_string_h" >&5 +echo "${ECHO_T}$ac_cv_header_string_h" >&6 +else + # Is the header compilable? +echo "$as_me:$LINENO: checking string.h usability" >&5 +echo $ECHO_N "checking string.h usability... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +#include +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_header_compiler=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_header_compiler=no +fi +rm -f conftest.$ac_objext conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +echo "${ECHO_T}$ac_header_compiler" >&6 + +# Is the header present? +echo "$as_me:$LINENO: checking string.h presence" >&5 +echo $ECHO_N "checking string.h presence... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + ac_header_preproc=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no +fi +rm -f conftest.err conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +echo "${ECHO_T}$ac_header_preproc" >&6 + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc in + yes:no ) + { echo "$as_me:$LINENO: WARNING: string.h: accepted by the compiler, rejected by the preprocessor!" >&5 +echo "$as_me: WARNING: string.h: accepted by the compiler, rejected by the preprocessor!" >&2;} + { echo "$as_me:$LINENO: WARNING: string.h: proceeding with the preprocessor's result" >&5 +echo "$as_me: WARNING: string.h: proceeding with the preprocessor's result" >&2;} + ( + cat <<\_ASBOX +## ------------------------------------ ## +## Report this to bug-autoconf@gnu.org. ## +## ------------------------------------ ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; + no:yes ) + { echo "$as_me:$LINENO: WARNING: string.h: present but cannot be compiled" >&5 +echo "$as_me: WARNING: string.h: present but cannot be compiled" >&2;} + { echo "$as_me:$LINENO: WARNING: string.h: check for missing prerequisite headers?" >&5 +echo "$as_me: WARNING: string.h: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: string.h: proceeding with the preprocessor's result" >&5 +echo "$as_me: WARNING: string.h: proceeding with the preprocessor's result" >&2;} + ( + cat <<\_ASBOX +## ------------------------------------ ## +## Report this to bug-autoconf@gnu.org. ## +## ------------------------------------ ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; +esac +echo "$as_me:$LINENO: checking for string.h" >&5 +echo $ECHO_N "checking for string.h... $ECHO_C" >&6 +if test "${ac_cv_header_string_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_cv_header_string_h=$ac_header_preproc +fi +echo "$as_me:$LINENO: result: $ac_cv_header_string_h" >&5 +echo "${ECHO_T}$ac_cv_header_string_h" >&6 + +fi +if test $ac_cv_header_string_h = yes; then + tcl_ok=1 +else + tcl_ok=0 +fi + + + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "strstr" >/dev/null 2>&1; then + : +else + tcl_ok=0 +fi +rm -f conftest* + + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "strerror" >/dev/null 2>&1; then + : +else + tcl_ok=0 +fi +rm -f conftest* + + + # See also memmove check below for a place where NO_STRING_H can be + # set and why. + + if test $tcl_ok = 0; then + cat >>confdefs.h <<\_ACEOF +#define NO_STRING_H 1 +_ACEOF + + fi + + if test "${ac_cv_header_sys_wait_h+set}" = set; then + echo "$as_me:$LINENO: checking for sys/wait.h" >&5 +echo $ECHO_N "checking for sys/wait.h... $ECHO_C" >&6 +if test "${ac_cv_header_sys_wait_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +fi +echo "$as_me:$LINENO: result: $ac_cv_header_sys_wait_h" >&5 +echo "${ECHO_T}$ac_cv_header_sys_wait_h" >&6 +else + # Is the header compilable? +echo "$as_me:$LINENO: checking sys/wait.h usability" >&5 +echo $ECHO_N "checking sys/wait.h usability... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +#include +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_header_compiler=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_header_compiler=no +fi +rm -f conftest.$ac_objext conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +echo "${ECHO_T}$ac_header_compiler" >&6 + +# Is the header present? +echo "$as_me:$LINENO: checking sys/wait.h presence" >&5 +echo $ECHO_N "checking sys/wait.h presence... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + ac_header_preproc=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no +fi +rm -f conftest.err conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +echo "${ECHO_T}$ac_header_preproc" >&6 + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc in + yes:no ) + { echo "$as_me:$LINENO: WARNING: sys/wait.h: accepted by the compiler, rejected by the preprocessor!" >&5 +echo "$as_me: WARNING: sys/wait.h: accepted by the compiler, rejected by the preprocessor!" >&2;} + { echo "$as_me:$LINENO: WARNING: sys/wait.h: proceeding with the preprocessor's result" >&5 +echo "$as_me: WARNING: sys/wait.h: proceeding with the preprocessor's result" >&2;} + ( + cat <<\_ASBOX +## ------------------------------------ ## +## Report this to bug-autoconf@gnu.org. ## +## ------------------------------------ ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; + no:yes ) + { echo "$as_me:$LINENO: WARNING: sys/wait.h: present but cannot be compiled" >&5 +echo "$as_me: WARNING: sys/wait.h: present but cannot be compiled" >&2;} + { echo "$as_me:$LINENO: WARNING: sys/wait.h: check for missing prerequisite headers?" >&5 +echo "$as_me: WARNING: sys/wait.h: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: sys/wait.h: proceeding with the preprocessor's result" >&5 +echo "$as_me: WARNING: sys/wait.h: proceeding with the preprocessor's result" >&2;} + ( + cat <<\_ASBOX +## ------------------------------------ ## +## Report this to bug-autoconf@gnu.org. ## +## ------------------------------------ ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; +esac +echo "$as_me:$LINENO: checking for sys/wait.h" >&5 +echo $ECHO_N "checking for sys/wait.h... $ECHO_C" >&6 +if test "${ac_cv_header_sys_wait_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_cv_header_sys_wait_h=$ac_header_preproc +fi +echo "$as_me:$LINENO: result: $ac_cv_header_sys_wait_h" >&5 +echo "${ECHO_T}$ac_cv_header_sys_wait_h" >&6 + +fi +if test $ac_cv_header_sys_wait_h = yes; then + : +else + cat >>confdefs.h <<\_ACEOF +#define NO_SYS_WAIT_H 1 +_ACEOF + +fi + + + if test "${ac_cv_header_dlfcn_h+set}" = set; then + echo "$as_me:$LINENO: checking for dlfcn.h" >&5 +echo $ECHO_N "checking for dlfcn.h... $ECHO_C" >&6 +if test "${ac_cv_header_dlfcn_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +fi +echo "$as_me:$LINENO: result: $ac_cv_header_dlfcn_h" >&5 +echo "${ECHO_T}$ac_cv_header_dlfcn_h" >&6 +else + # Is the header compilable? +echo "$as_me:$LINENO: checking dlfcn.h usability" >&5 +echo $ECHO_N "checking dlfcn.h usability... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +#include +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_header_compiler=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_header_compiler=no +fi +rm -f conftest.$ac_objext conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +echo "${ECHO_T}$ac_header_compiler" >&6 + +# Is the header present? +echo "$as_me:$LINENO: checking dlfcn.h presence" >&5 +echo $ECHO_N "checking dlfcn.h presence... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + ac_header_preproc=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no +fi +rm -f conftest.err conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +echo "${ECHO_T}$ac_header_preproc" >&6 + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc in + yes:no ) + { echo "$as_me:$LINENO: WARNING: dlfcn.h: accepted by the compiler, rejected by the preprocessor!" >&5 +echo "$as_me: WARNING: dlfcn.h: accepted by the compiler, rejected by the preprocessor!" >&2;} + { echo "$as_me:$LINENO: WARNING: dlfcn.h: proceeding with the preprocessor's result" >&5 +echo "$as_me: WARNING: dlfcn.h: proceeding with the preprocessor's result" >&2;} + ( + cat <<\_ASBOX +## ------------------------------------ ## +## Report this to bug-autoconf@gnu.org. ## +## ------------------------------------ ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; + no:yes ) + { echo "$as_me:$LINENO: WARNING: dlfcn.h: present but cannot be compiled" >&5 +echo "$as_me: WARNING: dlfcn.h: present but cannot be compiled" >&2;} + { echo "$as_me:$LINENO: WARNING: dlfcn.h: check for missing prerequisite headers?" >&5 +echo "$as_me: WARNING: dlfcn.h: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: dlfcn.h: proceeding with the preprocessor's result" >&5 +echo "$as_me: WARNING: dlfcn.h: proceeding with the preprocessor's result" >&2;} + ( + cat <<\_ASBOX +## ------------------------------------ ## +## Report this to bug-autoconf@gnu.org. ## +## ------------------------------------ ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; +esac +echo "$as_me:$LINENO: checking for dlfcn.h" >&5 +echo $ECHO_N "checking for dlfcn.h... $ECHO_C" >&6 +if test "${ac_cv_header_dlfcn_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_cv_header_dlfcn_h=$ac_header_preproc +fi +echo "$as_me:$LINENO: result: $ac_cv_header_dlfcn_h" >&5 +echo "${ECHO_T}$ac_cv_header_dlfcn_h" >&6 + +fi +if test $ac_cv_header_dlfcn_h = yes; then + : +else + cat >>confdefs.h <<\_ACEOF +#define NO_DLFCN_H 1 +_ACEOF + +fi + + + + # OS/390 lacks sys/param.h (and doesn't need it, by chance). + # tkUnixPort.h checks for HAVE_LIMITS_H, so do both HAVE and + # CHECK on limits.h + + + + +for ac_header in limits.h unistd.h sys/param.h +do +as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` +if eval "test \"\${$as_ac_Header+set}\" = set"; then + echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 +if eval "test \"\${$as_ac_Header+set}\" = set"; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +fi +echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 +else + # Is the header compilable? +echo "$as_me:$LINENO: checking $ac_header usability" >&5 +echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +#include <$ac_header> +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_header_compiler=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_header_compiler=no +fi +rm -f conftest.$ac_objext conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +echo "${ECHO_T}$ac_header_compiler" >&6 + +# Is the header present? +echo "$as_me:$LINENO: checking $ac_header presence" >&5 +echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <$ac_header> +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + ac_header_preproc=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no +fi +rm -f conftest.err conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +echo "${ECHO_T}$ac_header_preproc" >&6 + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc in + yes:no ) + { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 +echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 +echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} + ( + cat <<\_ASBOX +## ------------------------------------ ## +## Report this to bug-autoconf@gnu.org. ## +## ------------------------------------ ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; + no:yes ) + { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 +echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 +echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 +echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} + ( + cat <<\_ASBOX +## ------------------------------------ ## +## Report this to bug-autoconf@gnu.org. ## +## ------------------------------------ ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; +esac +echo "$as_me:$LINENO: checking for $ac_header" >&5 +echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 +if eval "test \"\${$as_ac_Header+set}\" = set"; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + eval "$as_ac_Header=$ac_header_preproc" +fi +echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 + +fi +if test `eval echo '${'$as_ac_Header'}'` = yes; then + cat >>confdefs.h <<_ACEOF +#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF + +fi + +done + + + + # Let the user call this, because if it triggers, they will + # need a compat/strtod.c that is correct. Users can also + # use Tcl_GetDouble(FromObj) instead. + #TEA_BUGGY_STRTOD + fi + + +#----------------------------------------------------------------------- +# __CHANGE__ +# Specify the C source files to compile in TEA_ADD_SOURCES, +# public headers that need to be installed in TEA_ADD_HEADERS, +# stub library C source files to compile in TEA_ADD_STUB_SOURCES, +# and runtime Tcl library files in TEA_ADD_TCL_SOURCES. +# This defines PKG(_STUB)_SOURCES, PKG(_STUB)_OBJECTS, PKG_HEADERS +# and PKG_TCL_SOURCES. +#----------------------------------------------------------------------- + + + vars="" + for i in $vars; do + case $i in + \$*) + # allow $-var names + PKG_SOURCES="$PKG_SOURCES $i" + PKG_OBJECTS="$PKG_OBJECTS $i" + ;; + *) + # check for existence - allows for generic/win/unix VPATH + if test ! -f "${srcdir}/$i" -a ! -f "${srcdir}/generic/$i" \ + -a ! -f "${srcdir}/win/$i" -a ! -f "${srcdir}/unix/$i" \ + ; then + { { echo "$as_me:$LINENO: error: could not find source file '$i'" >&5 +echo "$as_me: error: could not find source file '$i'" >&2;} + { (exit 1); exit 1; }; } + fi + PKG_SOURCES="$PKG_SOURCES $i" + # this assumes it is in a VPATH dir + i=`basename $i` + # handle user calling this before or after TEA_SETUP_COMPILER + if test x"${OBJEXT}" != x ; then + j="`echo $i | sed -e 's/\.[^.]*$//'`.${OBJEXT}" + else + j="`echo $i | sed -e 's/\.[^.]*$//'`.\${OBJEXT}" + fi + PKG_OBJECTS="$PKG_OBJECTS $j" + ;; + esac + done + + + + + vars="" + for i in $vars; do + # check for existence, be strict because it is installed + if test ! -f "${srcdir}/$i" ; then + { { echo "$as_me:$LINENO: error: could not find header file '${srcdir}/$i'" >&5 +echo "$as_me: error: could not find header file '${srcdir}/$i'" >&2;} + { (exit 1); exit 1; }; } + fi + PKG_HEADERS="$PKG_HEADERS $i" + done + + + + vars="" + for i in $vars; do + PKG_INCLUDES="$PKG_INCLUDES $i" + done + + + + vars="" + for i in $vars; do + PKG_LIBS="$PKG_LIBS $i" + done + + + + PKG_CFLAGS="$PKG_CFLAGS " + + + + vars="" + for i in $vars; do + # check for existence - allows for generic/win/unix VPATH + if test ! -f "${srcdir}/$i" -a ! -f "${srcdir}/generic/$i" \ + -a ! -f "${srcdir}/win/$i" -a ! -f "${srcdir}/unix/$i" \ + ; then + { { echo "$as_me:$LINENO: error: could not find stub source file '$i'" >&5 +echo "$as_me: error: could not find stub source file '$i'" >&2;} + { (exit 1); exit 1; }; } + fi + PKG_STUB_SOURCES="$PKG_STUB_SOURCES $i" + # this assumes it is in a VPATH dir + i=`basename $i` + # handle user calling this before or after TEA_SETUP_COMPILER + if test x"${OBJEXT}" != x ; then + j="`echo $i | sed -e 's/\.[^.]*$//'`.${OBJEXT}" + else + j="`echo $i | sed -e 's/\.[^.]*$//'`.\${OBJEXT}" + fi + PKG_STUB_OBJECTS="$PKG_STUB_OBJECTS $j" + done + + + + + vars="" + for i in $vars; do + # check for existence, be strict because it is installed + if test ! -f "${srcdir}/$i" ; then + { { echo "$as_me:$LINENO: error: could not find tcl source file '${srcdir}/$i'" >&5 +echo "$as_me: error: could not find tcl source file '${srcdir}/$i'" >&2;} + { (exit 1); exit 1; }; } + fi + PKG_TCL_SOURCES="$PKG_TCL_SOURCES $i" + done + + + +#-------------------------------------------------------------------- +# A few miscellaneous platform-specific items: +# +# Define a special symbol for Windows (BUILD_sample in this case) so +# that we create the export library with the dll. See sha1.h on how +# to use this. +# +# Windows creates a few extra files that need to be cleaned up. +# You can add more files to clean if your extension creates any extra +# files. +# +# Define any extra compiler flags in the PACKAGE_CFLAGS variable. +# These will be appended to the current set of compiler flags for +# your system. +#-------------------------------------------------------------------- + +if test "${TEA_PLATFORM}" = "windows" ; then + cat >>confdefs.h <<\_ACEOF +#define BUILD_tls 1 +_ACEOF + + cat >>confdefs.h <<\_ACEOF +#define WINDOWS 1 +_ACEOF + + CLEANFILES="pkgIndex.tcl *.lib *.dll *.exp *.ilk *.pdb vc*.pch" +else + CLEANFILES="pkgIndex.tcl" +fi + + +#-------------------------------------------------------------------- +# Choose which headers you need. Extension authors should try very +# hard to only rely on the Tcl public header files. Internal headers +# contain private data structures and are subject to change without +# notice. +# This MUST be called after TEA_LOAD_TCLCONFIG / TEA_LOAD_TKCONFIG +#-------------------------------------------------------------------- + + + echo "$as_me:$LINENO: checking for Tcl public headers" >&5 +echo $ECHO_N "checking for Tcl public headers... $ECHO_C" >&6 + + +# Check whether --with-tclinclude or --without-tclinclude was given. if test "${with_tclinclude+set}" = set; then withval="$with_tclinclude" with_tclinclude=${withval} -fi - - - if test x"${with_tclinclude}" != x ; then - if test -f "${with_tclinclude}/tcl.h" ; then - ac_cv_c_tclh=${with_tclinclude} - else - { echo "configure: error: ${with_tclinclude} directory does not contain Tcl public header file tcl.h" 1>&2; exit 1; } - fi - else - if eval "test \"`echo '$''{'ac_cv_c_tclh'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - - # Use the value from --with-tclinclude, if it was given - - if test x"${with_tclinclude}" != x ; then - ac_cv_c_tclh=${with_tclinclude} - else - # Check in the includedir, if --prefix was specified - - eval "temp_includedir=${includedir}" - for i in \ - `ls -d ${TCL_PREFIX}/include 2>/dev/null` \ - `ls -d ${temp_includedir} 2>/dev/null` \ - `ls -d ${TCL_BIN_DIR}/../include 2>/dev/null` \ - /usr/local/include /usr/include ; do - if test -f "$i/tcl.h" ; then - ac_cv_c_tclh=$i - break - fi - done - fi - -fi - - fi +fi; + + if test "${ac_cv_c_tclh+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + + # Use the value from --with-tclinclude, if it was given + + if test x"${with_tclinclude}" != x ; then + if test -f "${with_tclinclude}/tcl.h" ; then + ac_cv_c_tclh=${with_tclinclude} + else + { { echo "$as_me:$LINENO: error: ${with_tclinclude} directory does not contain tcl.h" >&5 +echo "$as_me: error: ${with_tclinclude} directory does not contain tcl.h" >&2;} + { (exit 1); exit 1; }; } + fi + else + # Check order: pkg --prefix location, Tcl's --prefix location, + # directory of tclConfig.sh, and Tcl source directory. + # Looking in the source dir is not ideal, but OK. + + eval "temp_includedir=${includedir}" + list="`ls -d ${temp_includedir} 2>/dev/null` \ + `ls -d ${TCL_PREFIX}/include 2>/dev/null` \ + `ls -d ${TCL_BIN_DIR}/../include 2>/dev/null` \ + `ls -d ${TCL_SRC_DIR}/generic 2>/dev/null`" + if test "${TEA_PLATFORM}" != "windows" -o "$GCC" = "yes"; then + list="$list /usr/local/include /usr/include" + fi + for i in $list ; do + if test -f "$i/tcl.h" ; then + ac_cv_c_tclh=$i + break + fi + done + fi + +fi + # Print a message based on how we determined the include path if test x"${ac_cv_c_tclh}" = x ; then - { echo "configure: error: tcl.h not found. Please specify its location with --with-tclinclude" 1>&2; exit 1; } + { { echo "$as_me:$LINENO: error: tcl.h not found. Please specify its location with --with-tclinclude" >&5 +echo "$as_me: error: tcl.h not found. Please specify its location with --with-tclinclude" >&2;} + { (exit 1); exit 1; }; } else - echo "$ac_t""${ac_cv_c_tclh}" 1>&6 + echo "$as_me:$LINENO: result: ${ac_cv_c_tclh}" >&5 +echo "${ECHO_T}${ac_cv_c_tclh}" >&6 fi # Convert to a native path and substitute into the output files. INCLUDE_DIR_NATIVE=`${CYGPATH} ${ac_cv_c_tclh}` TCL_INCLUDES=-I\"${INCLUDE_DIR_NATIVE}\" - - - -#-------------------------------------------------------------------- -# A few miscellaneous platform-specific items: -# -# Define a special symbol for Windows (BUILD_tls in this case) so -# that we create the export library with the dll. -# -# Clean up any extra files that Windows creates. -# -# Define any extra compiler flags in the PACKAGE_CFLAGS variable. -# These will be appended to the current set of compiler flags for -# your system. -#-------------------------------------------------------------------- - -case "`uname -s`" in - *win32* | *WIN32* | *CYGWIN_NT*|*CYGWIN_98*|*CYGWIN_95*) - cat >> confdefs.h <&6 -echo "configure:1535: checking for building with threads" >&5 # Check whether --enable-threads or --disable-threads was given. if test "${enable_threads+set}" = set; then enableval="$enable_threads" tcl_ok=$enableval else - tcl_ok=no -fi - + tcl_ok= +fi; if test "$tcl_ok" = "yes"; then TCL_THREADS=1 - cat >> confdefs.h <<\EOF -#define TCL_THREADS 1 -EOF - cat >> confdefs.h <<\EOF + if test "${TEA_PLATFORM}" != "windows" ; then + # We are always OK on Windows, so check what this platform wants. + cat >>confdefs.h <<\_ACEOF +#define USE_THREAD_ALLOC 1 +_ACEOF + + cat >>confdefs.h <<\_ACEOF #define _REENTRANT 1 -EOF - - - case "`uname -s`" in - *win32* | *WIN32* | *CYGWIN_NT* | *CYGWIN_98* | *CYGWIN_95*) - echo "$ac_t""yes" 1>&6 - ;; - *) - echo $ac_n "checking for pthread_mutex_init in -lpthread""... $ac_c" 1>&6 -echo "configure:1562: checking for pthread_mutex_init in -lpthread" >&5 -ac_lib_var=`echo pthread'_'pthread_mutex_init | sed 'y%./+-%__p_%'` -if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - ac_save_LIBS="$LIBS" +_ACEOF + + cat >>confdefs.h <<\_ACEOF +#define _THREAD_SAFE 1 +_ACEOF + + echo "$as_me:$LINENO: checking for pthread_mutex_init in -lpthread" >&5 +echo $ECHO_N "checking for pthread_mutex_init in -lpthread... $ECHO_C" >&6 +if test "${ac_cv_lib_pthread_pthread_mutex_init+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lpthread $LIBS" +cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char pthread_mutex_init (); +int +main () +{ +pthread_mutex_init (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_lib_pthread_pthread_mutex_init=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_lib_pthread_pthread_mutex_init=no +fi +rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +echo "$as_me:$LINENO: result: $ac_cv_lib_pthread_pthread_mutex_init" >&5 +echo "${ECHO_T}$ac_cv_lib_pthread_pthread_mutex_init" >&6 +if test $ac_cv_lib_pthread_pthread_mutex_init = yes; then + tcl_ok=yes +else + tcl_ok=no +fi + + if test "$tcl_ok" = "no"; then + # Check a little harder for __pthread_mutex_init in the + # same library, as some systems hide it there until + # pthread.h is defined. We could alternatively do an + # AC_TRY_COMPILE with pthread.h, but that will work with + # libpthread really doesn't exist, like AIX 4.2. + # [Bug: 4359] + echo "$as_me:$LINENO: checking for __pthread_mutex_init in -lpthread" >&5 +echo $ECHO_N "checking for __pthread_mutex_init in -lpthread... $ECHO_C" >&6 +if test "${ac_cv_lib_pthread___pthread_mutex_init+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_check_lib_save_LIBS=$LIBS LIBS="-lpthread $LIBS" -cat > conftest.$ac_ext <conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char __pthread_mutex_init (); +int +main () +{ +__pthread_mutex_init (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_lib_pthread___pthread_mutex_init=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_lib_pthread___pthread_mutex_init=no +fi +rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +echo "$as_me:$LINENO: result: $ac_cv_lib_pthread___pthread_mutex_init" >&5 +echo "${ECHO_T}$ac_cv_lib_pthread___pthread_mutex_init" >&6 +if test $ac_cv_lib_pthread___pthread_mutex_init = yes; then + tcl_ok=yes +else + tcl_ok=no +fi + + fi + + if test "$tcl_ok" = "yes"; then + # The space is needed + THREADS_LIBS=" -lpthread" + else + echo "$as_me:$LINENO: checking for pthread_mutex_init in -lpthreads" >&5 +echo $ECHO_N "checking for pthread_mutex_init in -lpthreads... $ECHO_C" >&6 +if test "${ac_cv_lib_pthreads_pthread_mutex_init+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lpthreads $LIBS" +cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + /* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif /* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char pthread_mutex_init(); - -int main() { -pthread_mutex_init() -; return 0; } -EOF -if { (eval echo configure:1581: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then - rm -rf conftest* - eval "ac_cv_lib_$ac_lib_var=yes" -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_lib_$ac_lib_var=no" -fi -rm -f conftest* -LIBS="$ac_save_LIBS" - -fi -if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then - echo "$ac_t""yes" 1>&6 + builtin and then its argument prototype would still apply. */ +char pthread_mutex_init (); +int +main () +{ +pthread_mutex_init (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_lib_pthreads_pthread_mutex_init=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_lib_pthreads_pthread_mutex_init=no +fi +rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +echo "$as_me:$LINENO: result: $ac_cv_lib_pthreads_pthread_mutex_init" >&5 +echo "${ECHO_T}$ac_cv_lib_pthreads_pthread_mutex_init" >&6 +if test $ac_cv_lib_pthreads_pthread_mutex_init = yes; then tcl_ok=yes else - echo "$ac_t""no" 1>&6 -tcl_ok=no + tcl_ok=no fi if test "$tcl_ok" = "yes"; then # The space is needed - THREADS_LIBS=" -lpthread" - echo "$ac_t""yes" 1>&6 + THREADS_LIBS=" -lpthreads" else - TCL_THREADS=0 - echo "$ac_t""no" 1>&6 - echo "configure: warning: "Don t know how to find pthread lib on your system - you must disable thread support or edit the LIBS in the Makefile..."" 1>&2 + echo "$as_me:$LINENO: checking for pthread_mutex_init in -lc" >&5 +echo $ECHO_N "checking for pthread_mutex_init in -lc... $ECHO_C" >&6 +if test "${ac_cv_lib_c_pthread_mutex_init+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lc $LIBS" +cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char pthread_mutex_init (); +int +main () +{ +pthread_mutex_init (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_lib_c_pthread_mutex_init=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_lib_c_pthread_mutex_init=no +fi +rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +echo "$as_me:$LINENO: result: $ac_cv_lib_c_pthread_mutex_init" >&5 +echo "${ECHO_T}$ac_cv_lib_c_pthread_mutex_init" >&6 +if test $ac_cv_lib_c_pthread_mutex_init = yes; then + tcl_ok=yes +else + tcl_ok=no +fi + + if test "$tcl_ok" = "no"; then + echo "$as_me:$LINENO: checking for pthread_mutex_init in -lc_r" >&5 +echo $ECHO_N "checking for pthread_mutex_init in -lc_r... $ECHO_C" >&6 +if test "${ac_cv_lib_c_r_pthread_mutex_init+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lc_r $LIBS" +cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char pthread_mutex_init (); +int +main () +{ +pthread_mutex_init (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_lib_c_r_pthread_mutex_init=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_lib_c_r_pthread_mutex_init=no +fi +rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +echo "$as_me:$LINENO: result: $ac_cv_lib_c_r_pthread_mutex_init" >&5 +echo "${ECHO_T}$ac_cv_lib_c_r_pthread_mutex_init" >&6 +if test $ac_cv_lib_c_r_pthread_mutex_init = yes; then + tcl_ok=yes +else + tcl_ok=no +fi + + if test "$tcl_ok" = "yes"; then + # The space is needed + THREADS_LIBS=" -pthread" + else + TCL_THREADS=0 + { echo "$as_me:$LINENO: WARNING: \"Don t know how to find pthread lib on your system - thread support disabled\"" >&5 +echo "$as_me: WARNING: \"Don t know how to find pthread lib on your system - thread support disabled\"" >&2;} + fi + fi fi - ;; - esac + fi + + # Does the pthread-implementation provide + # 'pthread_attr_setstacksize' ? + + ac_saved_libs=$LIBS + LIBS="$LIBS $THREADS_LIBS" + +for ac_func in pthread_attr_setstacksize +do +as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` +echo "$as_me:$LINENO: checking for $ac_func" >&5 +echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6 +if eval "test \"\${$as_ac_var+set}\" = set"; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char $ac_func (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ +#ifdef __STDC__ +# include +#else +# include +#endif +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +{ +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char $ac_func (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined (__stub_$ac_func) || defined (__stub___$ac_func) +choke me +#else +char (*f) () = $ac_func; +#endif +#ifdef __cplusplus +} +#endif + +int +main () +{ +return f != $ac_func; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + eval "$as_ac_var=yes" +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +eval "$as_ac_var=no" +fi +rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5 +echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6 +if test `eval echo '${'$as_ac_var'}'` = yes; then + cat >>confdefs.h <<_ACEOF +#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 +_ACEOF + +fi +done + + LIBS=$ac_saved_libs + +for ac_func in readdir_r +do +as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` +echo "$as_me:$LINENO: checking for $ac_func" >&5 +echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6 +if eval "test \"\${$as_ac_var+set}\" = set"; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char $ac_func (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ +#ifdef __STDC__ +# include +#else +# include +#endif +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +{ +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char $ac_func (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined (__stub_$ac_func) || defined (__stub___$ac_func) +choke me +#else +char (*f) () = $ac_func; +#endif +#ifdef __cplusplus +} +#endif + +int +main () +{ +return f != $ac_func; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + eval "$as_ac_var=yes" +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +eval "$as_ac_var=no" +fi +rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_var'}'`" >&5 +echo "${ECHO_T}`eval echo '${'$as_ac_var'}'`" >&6 +if test `eval echo '${'$as_ac_var'}'` = yes; then + cat >>confdefs.h <<_ACEOF +#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1 +_ACEOF + +fi +done + + fi else TCL_THREADS=0 - echo "$ac_t""no (default)" 1>&6 + fi + # Do checking message here to not mess up interleaved configure output + echo "$as_me:$LINENO: checking for building with threads" >&5 +echo $ECHO_N "checking for building with threads... $ECHO_C" >&6 + if test "${TCL_THREADS}" = "1"; then + cat >>confdefs.h <<\_ACEOF +#define TCL_THREADS 1 +_ACEOF + + echo "$as_me:$LINENO: result: yes" >&5 +echo "${ECHO_T}yes" >&6 + else + echo "$as_me:$LINENO: result: no (default)" >&5 +echo "${ECHO_T}no (default)" >&6 fi + # TCL_THREADS sanity checking. See if our request for building with + # threads is the same as the way Tcl was built. If not, warn the user. + case ${TCL_DEFS} in + *THREADS=1*) + if test "${TCL_THREADS}" = "0"; then + { echo "$as_me:$LINENO: WARNING: + Building ${PACKAGE_NAME} without threads enabled, but building against a Tcl + that IS thread-enabled." >&5 +echo "$as_me: WARNING: + Building ${PACKAGE_NAME} without threads enabled, but building against a Tcl + that IS thread-enabled." >&2;} + fi + ;; + *) + if test "${TCL_THREADS}" = "1"; then + { echo "$as_me:$LINENO: WARNING: + --enable-threads requested, but attempting building against a Tcl + that is NOT thread-enabled." >&5 +echo "$as_me: WARNING: + --enable-threads requested, but attempting building against a Tcl + that is NOT thread-enabled." >&2;} + fi + ;; + esac #-------------------------------------------------------------------- # The statement below defines a collection of symbols related to # building as a shared library instead of a static library. #-------------------------------------------------------------------- - echo $ac_n "checking how to build libraries""... $ac_c" 1>&6 -echo "configure:1627: checking how to build libraries" >&5 + echo "$as_me:$LINENO: checking how to build libraries" >&5 +echo $ECHO_N "checking how to build libraries... $ECHO_C" >&6 # Check whether --enable-shared or --disable-shared was given. if test "${enable_shared+set}" = set; then enableval="$enable_shared" tcl_ok=$enableval else tcl_ok=yes -fi - +fi; if test "${enable_shared+set}" = set; then enableval="$enable_shared" tcl_ok=$enableval else tcl_ok=yes fi if test "$tcl_ok" = "yes" ; then - echo "$ac_t""shared" 1>&6 + echo "$as_me:$LINENO: result: shared" >&5 +echo "${ECHO_T}shared" >&6 SHARED_BUILD=1 else - echo "$ac_t""static" 1>&6 + echo "$as_me:$LINENO: result: static" >&5 +echo "${ECHO_T}static" >&6 SHARED_BUILD=0 - cat >> confdefs.h <<\EOF + cat >>confdefs.h <<\_ACEOF #define STATIC_BUILD 1 -EOF +_ACEOF fi + #-------------------------------------------------------------------- # This macro figures out what flags to use with the compiler/linker # when building shared/static debug/optimized objects. This information -# is all taken from the tclConfig.sh file. -#-------------------------------------------------------------------- - -CFLAGS_DEBUG=${TCL_CFLAGS_DEBUG} -CFLAGS_OPTIMIZE=${TCL_CFLAGS_OPTIMIZE} -LDFLAGS_DEBUG=${TCL_LDFLAGS_DEBUG} -LDFLAGS_OPTIMIZE=${TCL_LDFLAGS_OPTIMIZE} -SHLIB_LD=${TCL_SHLIB_LD} -STLIB_LD=${TCL_STLIB_LD} -SHLIB_CFLAGS=${TCL_SHLIB_CFLAGS} - - - - - - - - -#-------------------------------------------------------------------- -# Set the default compiler switches based on the --enable-symbols -# option. -#-------------------------------------------------------------------- - - - case "`uname -s`" in - *win32* | *WIN32* | *CYGWIN_NT* | *CYGWIN_98* | *CYGWIN_95*) - tcl_dbgx=d - ;; - *) - tcl_dbgx=g - ;; +# can be taken from the tclConfig.sh file, but this figures it all out. +#-------------------------------------------------------------------- + + + + + # Step 0: Enable 64 bit support? + + echo "$as_me:$LINENO: checking if 64bit support is enabled" >&5 +echo $ECHO_N "checking if 64bit support is enabled... $ECHO_C" >&6 + # Check whether --enable-64bit or --disable-64bit was given. +if test "${enable_64bit+set}" = set; then + enableval="$enable_64bit" + do64bit=$enableval +else + do64bit=no +fi; + echo "$as_me:$LINENO: result: $do64bit" >&5 +echo "${ECHO_T}$do64bit" >&6 + + # Step 0.b: Enable Solaris 64 bit VIS support? + + echo "$as_me:$LINENO: checking if 64bit Sparc VIS support is requested" >&5 +echo $ECHO_N "checking if 64bit Sparc VIS support is requested... $ECHO_C" >&6 + # Check whether --enable-64bit-vis or --disable-64bit-vis was given. +if test "${enable_64bit_vis+set}" = set; then + enableval="$enable_64bit_vis" + do64bitVIS=$enableval +else + do64bitVIS=no +fi; + echo "$as_me:$LINENO: result: $do64bitVIS" >&5 +echo "${ECHO_T}$do64bitVIS" >&6 + + if test "$do64bitVIS" = "yes"; then + # Force 64bit on with VIS + do64bit=yes + fi + + # Step 0.c: Cross-compiling options for Windows/CE builds? + + if test "${TEA_PLATFORM}" = "windows" ; then + echo "$as_me:$LINENO: checking if Windows/CE build is requested" >&5 +echo $ECHO_N "checking if Windows/CE build is requested... $ECHO_C" >&6 + # Check whether --enable-wince or --disable-wince was given. +if test "${enable_wince+set}" = set; then + enableval="$enable_wince" + doWince=$enableval +else + doWince=no +fi; + echo "$as_me:$LINENO: result: $doWince" >&5 +echo "${ECHO_T}$doWince" >&6 + fi + + # Step 1: set the variable "system" to hold the name and version number + # for the system. This can usually be done via the "uname" command, but + # there are a few systems, like Next, where this doesn't work. + + echo "$as_me:$LINENO: checking system version (for dynamic loading)" >&5 +echo $ECHO_N "checking system version (for dynamic loading)... $ECHO_C" >&6 + if test -f /usr/lib/NextStep/software_version; then + system=NEXTSTEP-`awk '/3/,/3/' /usr/lib/NextStep/software_version` + else + system=`uname -s`-`uname -r` + if test "$?" -ne 0 ; then + echo "$as_me:$LINENO: result: unknown (can't find uname command)" >&5 +echo "${ECHO_T}unknown (can't find uname command)" >&6 + system=unknown + else + # Special check for weird MP-RAS system (uname returns weird + # results, and the version is kept in special file). + + if test -r /etc/.relid -a "X`uname -n`" = "X`uname -s`" ; then + system=MP-RAS-`awk '{print }' /etc/.relid'` + fi + if test "`uname -s`" = "AIX" ; then + system=AIX-`uname -v`.`uname -r` + fi + if test "${TEA_PLATFORM}" = "windows" ; then + system=windows + fi + echo "$as_me:$LINENO: result: $system" >&5 +echo "${ECHO_T}$system" >&6 + fi + fi + + # Step 2: check for existence of -ldl library. This is needed because + # Linux can use either -ldl or -ldld for dynamic loading. + + echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 +echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6 +if test "${ac_cv_lib_dl_dlopen+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldl $LIBS" +cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char dlopen (); +int +main () +{ +dlopen (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_lib_dl_dlopen=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_lib_dl_dlopen=no +fi +rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 +echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6 +if test $ac_cv_lib_dl_dlopen = yes; then + have_dl=yes +else + have_dl=no +fi + + + # Step 3: set configuration options based on system name and version. + + do64bit_ok=no + EXTRA_CFLAGS="" + TCL_EXPORT_FILE_SUFFIX="" + UNSHARED_LIB_SUFFIX="" + TCL_TRIM_DOTS='`echo ${PACKAGE_VERSION} | tr -d .`' + ECHO_VERSION='`echo ${PACKAGE_VERSION}`' + TCL_LIB_VERSIONS_OK=ok + CFLAGS_DEBUG=-g + CFLAGS_OPTIMIZE=-O + if test "$GCC" = "yes" ; then + CFLAGS_WARNING="-Wall -Wconversion -Wno-implicit-int" + else + CFLAGS_WARNING="" + fi + TCL_NEEDS_EXP_FILE=0 + TCL_BUILD_EXP_FILE="" + TCL_EXP_FILE="" + # Extract the first word of "ar", so it can be a program name with args. +set dummy ar; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_AR+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$AR"; then + ac_cv_prog_AR="$AR" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_AR="ar" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +AR=$ac_cv_prog_AR +if test -n "$AR"; then + echo "$as_me:$LINENO: result: $AR" >&5 +echo "${ECHO_T}$AR" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + STLIB_LD='${AR} cr' + LD_LIBRARY_PATH_VAR="LD_LIBRARY_PATH" + case $system in + windows) + # This is a 2-stage check to make sure we have the 64-bit SDK + # We have to know where the SDK is installed. + if test "$do64bit" = "yes" ; then + if test "x${MSSDK}x" = "xx" ; then + MSSDK="C:/Progra~1/Microsoft SDK" + fi + # In order to work in the tortured autoconf environment, + # we need to ensure that this path has no spaces + MSSDK=`cygpath -w -s "$MSSDK" | sed -e 's!\\\!/!g'` + if test ! -d "${MSSDK}/bin/win64" ; then + { echo "$as_me:$LINENO: WARNING: \"could not find 64-bit SDK to enable 64bit mode\"" >&5 +echo "$as_me: WARNING: \"could not find 64-bit SDK to enable 64bit mode\"" >&2;} + do64bit="no" + else + do64bit_ok="yes" + fi + fi + + if test "$doWince" != "no" ; then + if test "$do64bit" = "yes" ; then + { { echo "$as_me:$LINENO: error: Windows/CE and 64-bit builds incompatible" >&5 +echo "$as_me: error: Windows/CE and 64-bit builds incompatible" >&2;} + { (exit 1); exit 1; }; } + fi + if test "$GCC" = "yes" ; then + { { echo "$as_me:$LINENO: error: Windows/CE and GCC builds incompatible" >&5 +echo "$as_me: error: Windows/CE and GCC builds incompatible" >&2;} + { (exit 1); exit 1; }; } + fi + + # First, look for one uninstalled. + # the alternative search directory is invoked by --with-celib + + if test x"${no_celib}" = x ; then + # we reset no_celib in case something fails here + no_celib=true + +# Check whether --with-celib or --without-celib was given. +if test "${with_celib+set}" = set; then + withval="$with_celib" + with_celibconfig=${withval} +fi; + echo "$as_me:$LINENO: checking for Windows/CE celib directory" >&5 +echo $ECHO_N "checking for Windows/CE celib directory... $ECHO_C" >&6 + if test "${ac_cv_c_celibconfig+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + + # First check to see if --with-celibconfig was specified. + if test x"${with_celibconfig}" != x ; then + if test -d "${with_celibconfig}/inc" ; then + ac_cv_c_celibconfig=`(cd ${with_celibconfig}; pwd)` + else + { { echo "$as_me:$LINENO: error: ${with_celibconfig} directory doesn't contain inc directory" >&5 +echo "$as_me: error: ${with_celibconfig} directory doesn't contain inc directory" >&2;} + { (exit 1); exit 1; }; } + fi + fi + + # then check for a celib library + if test x"${ac_cv_c_celibconfig}" = x ; then + for i in \ + ../celib-palm-3.0 \ + ../celib \ + ../../celib-palm-3.0 \ + ../../celib \ + `ls -dr ../celib-*3.[0-9]* 2>/dev/null` \ + ${srcdir}/../celib-palm-3.0 \ + ${srcdir}/../celib \ + `ls -dr ${srcdir}/../celib-*3.[0-9]* 2>/dev/null` \ + ; do + if test -d "$i/inc" ; then + ac_cv_c_celibconfig=`(cd $i; pwd)` + break + fi + done + fi + +fi + + if test x"${ac_cv_c_celibconfig}" = x ; then + CELIB_DIR="# no Celib configs found" + { { echo "$as_me:$LINENO: error: Cannot find celib support library directory" >&5 +echo "$as_me: error: Cannot find celib support library directory" >&2;} + { (exit 1); exit 1; }; } + else + no_celib= + CELIB_DIR=${ac_cv_c_celibconfig} + echo "$as_me:$LINENO: result: found $CELIB_DIR" >&5 +echo "${ECHO_T}found $CELIB_DIR" >&6 + fi + fi + + # set defaults + # Currently Tcl requires 300+ + CEVERSION=300; # could be 211 300 301 ... + TARGETCPU=ARM; # could be ARM MIPS SH3 X86 ... + PLATFORM="Pocket PC 2002" + if test "$doWince" = "yes"; then + doWince="300,ARM,ARM,Pocket PC 2002" + fi + eval `echo $doWince | awk -F "," '{ \ + if (length($1)) { printf "CEVERSION=%s\n", $1 }; \ + if (length($2)) { printf "TARGETCPU=%s\n", toupper($2) }; \ + if (length($3)) { printf "ARCH=%s\n", toupper($3) }; \ + if (length($4)) { printf "PLATFORM=%s\n", $4 }; \ + }'` + OSVERSION=WCE$CEVERSION; + if test "x${ARCH}" = "x" ; then + ARCH=$TARGETCPU; # could be ARM MIPS SH3 X86 X86EM ... + fi + if test "x${WCEROOT}" = "x" ; then + WCEROOT="C:/Program Files/Microsoft eMbedded Tools" + fi + if test "x${SDKROOT}" = "x" ; then + SDKROOT="C:/Windows CE Tools" + fi + # In order to work in the tortured autoconf environment, + # we need to ensure that this path has no spaces + WCEROOT=`cygpath -w -s "$WCEROOT" | sed -e 's!\\\!/!g'` + SDKROOT=`cygpath -w -s "$SDKROOT" | sed -e 's!\\\!/!g'` + CELIB_DIR=`cygpath -w -s "$CELIB_DIR" | sed -e 's!\\\!/!g'` + if test ! -d "${SDKROOT}/${OSVERSION}/${PLATFORM}/Lib/${TARGETCPU}" \ + -o ! -d "${WCEROOT}/EVC/${OSVERSION}/bin"; then + { { echo "$as_me:$LINENO: error: could not find PocketPC SDK or target compiler to enable WinCE mode $CEVERSION,$TARGETCPU,$ARCH,$PLATFORM" >&5 +echo "$as_me: error: could not find PocketPC SDK or target compiler to enable WinCE mode $CEVERSION,$TARGETCPU,$ARCH,$PLATFORM" >&2;} + { (exit 1); exit 1; }; } + doWince="no" + else + CEINCLUDE=`cygpath -w -s "${SDKROOT}/${OSVERSION}/${PLATFORM}/include" | sed -e 's!\\\!/!g'` + CELIBPATH=`cygpath -w -s "${SDKROOT}/${OSVERSION}/${PLATFORM}/Lib/${TARGETCPU}" | sed -e 's!\\\!/!g'` + fi + fi + + if test "$GCC" != "yes" ; then + if test "${SHARED_BUILD}" = "0" ; then + runtime=-MT + else + runtime=-MD + fi + + if test "$do64bit" = "yes" ; then + # All this magic is necessary for the Win64 SDK RC1 - hobbs + export CC="${MSSDK}/Bin/Win64/cl.exe \ + -I${MSSDK}/Include/prerelease \ + -I${MSSDK}/Include/Win64/crt \ + -I${MSSDK}/Include" + export RC="${MSSDK}/bin/rc.exe" + export lflags="-MACHINE:IA64 -LIBPATH:${MSSDK}/Lib/IA64 \ + -LIBPATH:${MSSDK}/Lib/Prerelease/IA64" + export STLIB_LD="${MSSDK}/bin/win64/lib.exe -nologo ${lflags}" + export LINKBIN="${MSSDK}/bin/win64/link.exe ${lflags}" + CFLAGS_DEBUG="-nologo -Zi -Od -W3 ${runtime}d" + CFLAGS_OPTIMIZE="-nologo -O2 -Gs -W2 ${runtime}" + elif test "$doWince" != "no" ; then + if test "${TARGETCPU}" = "X86"; then + CC="${WCEROOT}/EVC/${OSVERSION}/bin/cl.exe -I\"${CELIB_DIR}/inc\" -I\"${CEINCLUDE}\"" + else + CC="${WCEROOT}/EVC/${OSVERSION}/bin/cl${TARGETCPU}.exe -I\"${CELIB_DIR}/inc\" -I\"${CEINCLUDE}\"" + fi + RC="${WCEROOT}/Common/EVC/bin/rc.exe" + cpulower=`echo ${TARGETCPU} | awk '{print tolower($0)}'` + defs="${TARGETCPU} _${TARGETCPU}_ ${cpulower} _${cpulower}_ POCKET_SIZE PALM_SIZE _MT _DLL _WINDOWS" + for i in $defs ; do + cat >>confdefs.h <<_ACEOF +#define $i 1 +_ACEOF + + done + cat >>confdefs.h <<_ACEOF +#define _WIN32_WCE $CEVERSION +_ACEOF + + cat >>confdefs.h <<_ACEOF +#define UNDER_CE $CEVERSION +_ACEOF + + CFLAGS_DEBUG="-nologo -Zi -Od" + CFLAGS_OPTIMIZE="-nologo -Ox" + lflags="-MACHINE:${TARGETCPU} -LIBPATH:\"${CELIBPATH}\" -subsystem:windowsce,3.00" + STLIB_LD="${WCEROOT}/EVC/${OSVERSION}/bin/lib.exe -nologo ${lflags}" + LINKBIN="${WCEROOT}/EVC/${OSVERSION}/bin/link.exe ${lflags}" + else + RC="rc" + STLIB_LD="lib -nologo" + LINKBIN="link -link50compat" + CFLAGS_DEBUG="-nologo -Z7 -Od -W3 -WX ${runtime}d" + CFLAGS_OPTIMIZE="-nologo -O2 -Gs -GD -W2 ${runtime}" + fi + fi + + if test "$GCC" = "yes"; then + # mingw gcc mode + RC="windres" + CFLAGS_DEBUG="-g" + CFLAGS_OPTIMIZE="-O2" + SHLIB_LD="$CC -shared" + UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}\$\{DBGX\}.a' + LDFLAGS_CONSOLE="-wl,--subsystem,console ${lflags}" + LDFLAGS_WINDOW="-wl,--subsystem,windows ${lflags}" + else + SHLIB_LD="${LINKBIN} -dll -nologo" + UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}\$\{DBGX\}.lib' + EXTRA_CFLAGS="-YX" + PATHTYPE=-w + # For information on what debugtype is most useful, see: + # http://msdn.microsoft.com/library/en-us/dnvc60/html/gendepdebug.asp + # This essentially turns it all on. + LDFLAGS_DEBUG="-debug:full -debugtype:both -warn:2" + LDFLAGS_OPTIMIZE="-release" + if test "$doWince" != "no" ; then + LDFLAGS_CONSOLE="-link ${lflags}" + LDFLAGS_WINDOW=${LDFLAGS_CONSOLE} + else + LDFLAGS_CONSOLE="-link -subsystem:console ${lflags}" + LDFLAGS_WINDOW="-link -subsystem:windows ${lflags}" + fi + fi + + SHLIB_LD_LIBS='${LIBS}' + SHLIB_SUFFIX=".dll" + SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}\$\{DBGX\}.dll' + + TCL_LIB_VERSIONS_OK=nodots + # Bogus to avoid getting this turned off + DL_OBJS="tclLoadNone.obj" + ;; + AIX-*) + if test "${TCL_THREADS}" = "1" -a "$GCC" != "yes" ; then + # AIX requires the _r compiler when gcc isn't being used + if test "${CC}" != "cc_r" ; then + CC=${CC}_r + fi + echo "$as_me:$LINENO: result: Using $CC for compiling with threads" >&5 +echo "${ECHO_T}Using $CC for compiling with threads" >&6 + fi + LIBS="$LIBS -lc" + SHLIB_CFLAGS="" + SHLIB_SUFFIX=".so" + SHLIB_LD_LIBS='${LIBS}' + + DL_OBJS="tclLoadDl.o" + LDFLAGS="" + LD_LIBRARY_PATH_VAR="LIBPATH" + + # AIX v<=4.1 has some different flags than 4.2+ + if test "$system" = "AIX-4.1" -o "`uname -v`" -lt "4" ; then + #LIBOBJS="$LIBOBJS tclLoadAix.o" + LIBOBJS="$LIBOBJS tclLoadAix.$ac_objext" + DL_LIBS="-lld" + fi + + # Check to enable 64-bit flags for compiler/linker on AIX 4+ + if test "$do64bit" = "yes" -a "`uname -v`" -gt "3" ; then + if test "$GCC" = "yes" ; then + { echo "$as_me:$LINENO: WARNING: \"64bit mode not supported with GCC on $system\"" >&5 +echo "$as_me: WARNING: \"64bit mode not supported with GCC on $system\"" >&2;} + else + do64bit_ok=yes + EXTRA_CFLAGS="-q64" + LDFLAGS="-q64" + RANLIB="${RANLIB} -X64" + AR="${AR} -X64" + SHLIB_LD_FLAGS="-b64" + fi + fi + + if test "`uname -m`" = "ia64" ; then + # AIX-5 uses ELF style dynamic libraries on IA-64, but not PPC + SHLIB_LD="/usr/ccs/bin/ld -G -z text" + # AIX-5 has dl* in libc.so + DL_LIBS="" + if test "$GCC" = "yes" ; then + LD_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}' + else + LD_SEARCH_FLAGS='-R${LIB_RUNTIME_DIR}' + fi + else + SHLIB_LD="${TCL_SRC_DIR}/unix/ldAix /bin/ld -bhalt:4 -bM:SRE -bE:lib.exp -H512 -T512 -bnoentry ${SHLIB_LD_FLAGS}" + DL_LIBS="-ldl" + LD_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}' + TCL_NEEDS_EXP_FILE=1 + TCL_EXPORT_FILE_SUFFIX='${PACKAGE_VERSION}\$\{DBGX\}.exp' + fi + + # On AIX <=v4 systems, libbsd.a has to be linked in to support + # non-blocking file IO. This library has to be linked in after + # the MATH_LIBS or it breaks the pow() function. The way to + # insure proper sequencing, is to add it to the tail of MATH_LIBS. + # This library also supplies gettimeofday. + # + # AIX does not have a timezone field in struct tm. When the AIX + # bsd library is used, the timezone global and the gettimeofday + # methods are to be avoided for timezone deduction instead, we + # deduce the timezone by comparing the localtime result on a + # known GMT value. + + echo "$as_me:$LINENO: checking for gettimeofday in -lbsd" >&5 +echo $ECHO_N "checking for gettimeofday in -lbsd... $ECHO_C" >&6 +if test "${ac_cv_lib_bsd_gettimeofday+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lbsd $LIBS" +cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char gettimeofday (); +int +main () +{ +gettimeofday (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_lib_bsd_gettimeofday=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_lib_bsd_gettimeofday=no +fi +rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +echo "$as_me:$LINENO: result: $ac_cv_lib_bsd_gettimeofday" >&5 +echo "${ECHO_T}$ac_cv_lib_bsd_gettimeofday" >&6 +if test $ac_cv_lib_bsd_gettimeofday = yes; then + libbsd=yes +else + libbsd=no +fi + + if test $libbsd = yes; then + MATH_LIBS="$MATH_LIBS -lbsd" + cat >>confdefs.h <<\_ACEOF +#define USE_DELTA_FOR_TZ 1 +_ACEOF + + fi + ;; + BSD/OS-2.1*|BSD/OS-3*) + SHLIB_CFLAGS="" + SHLIB_LD="shlicc -r" + SHLIB_LD_LIBS='${LIBS}' + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="-ldl" + LDFLAGS="" + LD_SEARCH_FLAGS="" + ;; + BSD/OS-4.*) + SHLIB_CFLAGS="-export-dynamic -fPIC" + SHLIB_LD="cc -shared" + SHLIB_LD_LIBS='${LIBS}' + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="-ldl" + LDFLAGS="-export-dynamic" + LD_SEARCH_FLAGS="" + ;; + dgux*) + SHLIB_CFLAGS="-K PIC" + SHLIB_LD="cc -G" + SHLIB_LD_LIBS="" + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="-ldl" + LDFLAGS="" + LD_SEARCH_FLAGS="" + ;; + HP-UX-*.11.*) + # Use updated header definitions where possible + cat >>confdefs.h <<\_ACEOF +#define _XOPEN_SOURCE_EXTENDED 1 +_ACEOF + + + SHLIB_SUFFIX=".sl" + echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5 +echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6 +if test "${ac_cv_lib_dld_shl_load+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldld $LIBS" +cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char shl_load (); +int +main () +{ +shl_load (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_lib_dld_shl_load=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_lib_dld_shl_load=no +fi +rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5 +echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6 +if test $ac_cv_lib_dld_shl_load = yes; then + tcl_ok=yes +else + tcl_ok=no +fi + + if test "$tcl_ok" = yes; then + SHLIB_CFLAGS="+z" + SHLIB_LD="ld -b" + SHLIB_LD_LIBS='${LIBS}' + DL_OBJS="tclLoadShl.o" + DL_LIBS="-ldld" + LDFLAGS="-Wl,-E" + LD_SEARCH_FLAGS='-Wl,+s,+b,${LIB_RUNTIME_DIR}:.' + fi + LD_LIBRARY_PATH_VAR="SHLIB_PATH" + + # Users may want PA-RISC 1.1/2.0 portable code - needs HP cc + #EXTRA_CFLAGS="+DAportable" + + # Check to enable 64-bit flags for compiler/linker + if test "$do64bit" = "yes" ; then + if test "$GCC" = "yes" ; then + hpux_arch=`${CC} -dumpmachine` + case $hpux_arch in + hppa64*) + # 64-bit gcc in use. Fix flags for GNU ld. + do64bit_ok=yes + SHLIB_LD="${CC} -shared" + SHLIB_LD_LIBS="" + LD_SEARCH_FLAGS='' + ;; + *) + { echo "$as_me:$LINENO: WARNING: \"64bit mode not supported with GCC on $system\"" >&5 +echo "$as_me: WARNING: \"64bit mode not supported with GCC on $system\"" >&2;} + ;; + esac + else + do64bit_ok=yes + if test "`uname -m`" = "ia64" ; then + EXTRA_CFLAGS="+DD64" + LDFLAGS="+DD64 $LDFLAGS" + else + EXTRA_CFLAGS="+DA2.0W" + LDFLAGS="+DA2.0W $LDFLAGS" + fi + fi + fi + ;; + HP-UX-*.08.*|HP-UX-*.09.*|HP-UX-*.10.*) + SHLIB_SUFFIX=".sl" + echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5 +echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6 +if test "${ac_cv_lib_dld_shl_load+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldld $LIBS" +cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any gcc2 internal prototype to avoid an error. */ +#ifdef __cplusplus +extern "C" +#endif +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char shl_load (); +int +main () +{ +shl_load (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_lib_dld_shl_load=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_cv_lib_dld_shl_load=no +fi +rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5 +echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6 +if test $ac_cv_lib_dld_shl_load = yes; then + tcl_ok=yes +else + tcl_ok=no +fi + + if test "$tcl_ok" = yes; then + SHLIB_CFLAGS="+z" + SHLIB_LD="ld -b" + SHLIB_LD_LIBS="" + DL_OBJS="tclLoadShl.o" + DL_LIBS="-ldld" + LDFLAGS="-Wl,-E" + LD_SEARCH_FLAGS='-Wl,+s,+b,${LIB_RUNTIME_DIR}:.' + fi + LD_LIBRARY_PATH_VAR="SHLIB_PATH" + ;; + IRIX-4.*) + SHLIB_CFLAGS="-G 0" + SHLIB_SUFFIX=".a" + SHLIB_LD="echo tclLdAout $CC \{$SHLIB_CFLAGS\} | `pwd`/tclsh -r -G 0" + SHLIB_LD_LIBS='${LIBS}' + DL_OBJS="tclLoadAout.o" + DL_LIBS="" + LDFLAGS="-Wl,-D,08000000" + LD_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}' + SHARED_LIB_SUFFIX='${PACKAGE_VERSION}\$\{DBGX\}.a' + ;; + IRIX-5.*) + SHLIB_CFLAGS="" + SHLIB_LD="ld -shared -rdata_shared" + SHLIB_LD_LIBS='${LIBS}' + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="" + LD_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' + EXTRA_CFLAGS="" + LDFLAGS="" + ;; + IRIX-6.*|IRIX64-6.5*) + SHLIB_CFLAGS="" + SHLIB_LD="ld -n32 -shared -rdata_shared" + SHLIB_LD_LIBS='${LIBS}' + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="" + LD_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' + if test "$GCC" = "yes" ; then + EXTRA_CFLAGS="-mabi=n32" + LDFLAGS="-mabi=n32" + else + case $system in + IRIX-6.3) + # Use to build 6.2 compatible binaries on 6.3. + EXTRA_CFLAGS="-n32 -D_OLD_TERMIOS" + ;; + *) + EXTRA_CFLAGS="-n32" + ;; + esac + LDFLAGS="-n32" + fi + ;; + IRIX64-6.*) + SHLIB_CFLAGS="" + SHLIB_LD="ld -n32 -shared -rdata_shared" + SHLIB_LD_LIBS='${LIBS}' + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="" + LDFLAGS="" + LD_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' + + # Check to enable 64-bit flags for compiler/linker + + if test "$do64bit" = "yes" ; then + if test "$GCC" = "yes" ; then + { echo "$as_me:$LINENO: WARNING: 64bit mode not supported by gcc" >&5 +echo "$as_me: WARNING: 64bit mode not supported by gcc" >&2;} + else + do64bit_ok=yes + SHLIB_LD="ld -64 -shared -rdata_shared" + EXTRA_CFLAGS="-64" + LDFLAGS="-64" + fi + fi + ;; + Linux*) + SHLIB_CFLAGS="-fPIC" + SHLIB_LD_LIBS='${LIBS}' + SHLIB_SUFFIX=".so" + + # egcs-2.91.66 on Redhat Linux 6.0 generates lots of warnings + # when you inline the string and math operations. Turn this off to + # get rid of the warnings. + + #CFLAGS_OPTIMIZE="${CFLAGS_OPTIMIZE} -D__NO_STRING_INLINES -D__NO_MATH_INLINES" + + if test "$have_dl" = yes; then + SHLIB_LD="${CC} -shared" + DL_OBJS="tclLoadDl.o" + DL_LIBS="-ldl" + LDFLAGS="-rdynamic" + LD_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' + else + if test "${ac_cv_header_dld_h+set}" = set; then + echo "$as_me:$LINENO: checking for dld.h" >&5 +echo $ECHO_N "checking for dld.h... $ECHO_C" >&6 +if test "${ac_cv_header_dld_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +fi +echo "$as_me:$LINENO: result: $ac_cv_header_dld_h" >&5 +echo "${ECHO_T}$ac_cv_header_dld_h" >&6 +else + # Is the header compilable? +echo "$as_me:$LINENO: checking dld.h usability" >&5 +echo $ECHO_N "checking dld.h usability... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +#include +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_header_compiler=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_header_compiler=no +fi +rm -f conftest.$ac_objext conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +echo "${ECHO_T}$ac_header_compiler" >&6 + +# Is the header present? +echo "$as_me:$LINENO: checking dld.h presence" >&5 +echo $ECHO_N "checking dld.h presence... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + ac_header_preproc=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no +fi +rm -f conftest.err conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +echo "${ECHO_T}$ac_header_preproc" >&6 + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc in + yes:no ) + { echo "$as_me:$LINENO: WARNING: dld.h: accepted by the compiler, rejected by the preprocessor!" >&5 +echo "$as_me: WARNING: dld.h: accepted by the compiler, rejected by the preprocessor!" >&2;} + { echo "$as_me:$LINENO: WARNING: dld.h: proceeding with the preprocessor's result" >&5 +echo "$as_me: WARNING: dld.h: proceeding with the preprocessor's result" >&2;} + ( + cat <<\_ASBOX +## ------------------------------------ ## +## Report this to bug-autoconf@gnu.org. ## +## ------------------------------------ ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; + no:yes ) + { echo "$as_me:$LINENO: WARNING: dld.h: present but cannot be compiled" >&5 +echo "$as_me: WARNING: dld.h: present but cannot be compiled" >&2;} + { echo "$as_me:$LINENO: WARNING: dld.h: check for missing prerequisite headers?" >&5 +echo "$as_me: WARNING: dld.h: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: dld.h: proceeding with the preprocessor's result" >&5 +echo "$as_me: WARNING: dld.h: proceeding with the preprocessor's result" >&2;} + ( + cat <<\_ASBOX +## ------------------------------------ ## +## Report this to bug-autoconf@gnu.org. ## +## ------------------------------------ ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; +esac +echo "$as_me:$LINENO: checking for dld.h" >&5 +echo $ECHO_N "checking for dld.h... $ECHO_C" >&6 +if test "${ac_cv_header_dld_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_cv_header_dld_h=$ac_header_preproc +fi +echo "$as_me:$LINENO: result: $ac_cv_header_dld_h" >&5 +echo "${ECHO_T}$ac_cv_header_dld_h" >&6 + +fi +if test $ac_cv_header_dld_h = yes; then + + SHLIB_LD="ld -shared" + DL_OBJS="tclLoadDld.o" + DL_LIBS="-ldld" + LDFLAGS="" + LD_SEARCH_FLAGS="" +fi + + + fi + if test "`uname -m`" = "alpha" ; then + EXTRA_CFLAGS="-mieee" + fi + + # The combo of gcc + glibc has a bug related + # to inlining of functions like strtod(). The + # -fno-builtin flag should address this problem + # but it does not work. The -fno-inline flag + # is kind of overkill but it works. + # Disable inlining only when one of the + # files in compat/*.c is being linked in. + if test x"${USE_COMPAT}" != x ; then + EXTRA_CFLAGS="${EXTRA_CFLAGS} -fno-inline" + fi + + ;; + GNU*) + SHLIB_CFLAGS="-fPIC" + SHLIB_LD_LIBS='${LIBS}' + SHLIB_SUFFIX=".so" + + if test "$have_dl" = yes; then + SHLIB_LD="${CC} -shared" + DL_OBJS="" + DL_LIBS="-ldl" + LDFLAGS="-rdynamic" + LD_SEARCH_FLAGS="" + else + if test "${ac_cv_header_dld_h+set}" = set; then + echo "$as_me:$LINENO: checking for dld.h" >&5 +echo $ECHO_N "checking for dld.h... $ECHO_C" >&6 +if test "${ac_cv_header_dld_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +fi +echo "$as_me:$LINENO: result: $ac_cv_header_dld_h" >&5 +echo "${ECHO_T}$ac_cv_header_dld_h" >&6 +else + # Is the header compilable? +echo "$as_me:$LINENO: checking dld.h usability" >&5 +echo $ECHO_N "checking dld.h usability... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +#include +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_header_compiler=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_header_compiler=no +fi +rm -f conftest.$ac_objext conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +echo "${ECHO_T}$ac_header_compiler" >&6 + +# Is the header present? +echo "$as_me:$LINENO: checking dld.h presence" >&5 +echo $ECHO_N "checking dld.h presence... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + ac_header_preproc=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no +fi +rm -f conftest.err conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +echo "${ECHO_T}$ac_header_preproc" >&6 + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc in + yes:no ) + { echo "$as_me:$LINENO: WARNING: dld.h: accepted by the compiler, rejected by the preprocessor!" >&5 +echo "$as_me: WARNING: dld.h: accepted by the compiler, rejected by the preprocessor!" >&2;} + { echo "$as_me:$LINENO: WARNING: dld.h: proceeding with the preprocessor's result" >&5 +echo "$as_me: WARNING: dld.h: proceeding with the preprocessor's result" >&2;} + ( + cat <<\_ASBOX +## ------------------------------------ ## +## Report this to bug-autoconf@gnu.org. ## +## ------------------------------------ ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; + no:yes ) + { echo "$as_me:$LINENO: WARNING: dld.h: present but cannot be compiled" >&5 +echo "$as_me: WARNING: dld.h: present but cannot be compiled" >&2;} + { echo "$as_me:$LINENO: WARNING: dld.h: check for missing prerequisite headers?" >&5 +echo "$as_me: WARNING: dld.h: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: dld.h: proceeding with the preprocessor's result" >&5 +echo "$as_me: WARNING: dld.h: proceeding with the preprocessor's result" >&2;} + ( + cat <<\_ASBOX +## ------------------------------------ ## +## Report this to bug-autoconf@gnu.org. ## +## ------------------------------------ ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; +esac +echo "$as_me:$LINENO: checking for dld.h" >&5 +echo $ECHO_N "checking for dld.h... $ECHO_C" >&6 +if test "${ac_cv_header_dld_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_cv_header_dld_h=$ac_header_preproc +fi +echo "$as_me:$LINENO: result: $ac_cv_header_dld_h" >&5 +echo "${ECHO_T}$ac_cv_header_dld_h" >&6 + +fi +if test $ac_cv_header_dld_h = yes; then + + SHLIB_LD="ld -shared" + DL_OBJS="" + DL_LIBS="-ldld" + LDFLAGS="" + LD_SEARCH_FLAGS="" +fi + + + fi + if test "`uname -m`" = "alpha" ; then + EXTRA_CFLAGS="-mieee" + fi + ;; + MP-RAS-02*) + SHLIB_CFLAGS="-K PIC" + SHLIB_LD="cc -G" + SHLIB_LD_LIBS="" + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="-ldl" + LDFLAGS="" + LD_SEARCH_FLAGS="" + ;; + MP-RAS-*) + SHLIB_CFLAGS="-K PIC" + SHLIB_LD="cc -G" + SHLIB_LD_LIBS="" + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="-ldl" + LDFLAGS="-Wl,-Bexport" + LD_SEARCH_FLAGS="" + ;; + NetBSD-*|FreeBSD-[1-2].*) + # Not available on all versions: check for include file. + if test "${ac_cv_header_dlfcn_h+set}" = set; then + echo "$as_me:$LINENO: checking for dlfcn.h" >&5 +echo $ECHO_N "checking for dlfcn.h... $ECHO_C" >&6 +if test "${ac_cv_header_dlfcn_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +fi +echo "$as_me:$LINENO: result: $ac_cv_header_dlfcn_h" >&5 +echo "${ECHO_T}$ac_cv_header_dlfcn_h" >&6 +else + # Is the header compilable? +echo "$as_me:$LINENO: checking dlfcn.h usability" >&5 +echo $ECHO_N "checking dlfcn.h usability... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +#include +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_header_compiler=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +ac_header_compiler=no +fi +rm -f conftest.$ac_objext conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +echo "${ECHO_T}$ac_header_compiler" >&6 + +# Is the header present? +echo "$as_me:$LINENO: checking dlfcn.h presence" >&5 +echo $ECHO_N "checking dlfcn.h presence... $ECHO_C" >&6 +cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_c_preproc_warn_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + ac_header_preproc=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no +fi +rm -f conftest.err conftest.$ac_ext +echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +echo "${ECHO_T}$ac_header_preproc" >&6 + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc in + yes:no ) + { echo "$as_me:$LINENO: WARNING: dlfcn.h: accepted by the compiler, rejected by the preprocessor!" >&5 +echo "$as_me: WARNING: dlfcn.h: accepted by the compiler, rejected by the preprocessor!" >&2;} + { echo "$as_me:$LINENO: WARNING: dlfcn.h: proceeding with the preprocessor's result" >&5 +echo "$as_me: WARNING: dlfcn.h: proceeding with the preprocessor's result" >&2;} + ( + cat <<\_ASBOX +## ------------------------------------ ## +## Report this to bug-autoconf@gnu.org. ## +## ------------------------------------ ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; + no:yes ) + { echo "$as_me:$LINENO: WARNING: dlfcn.h: present but cannot be compiled" >&5 +echo "$as_me: WARNING: dlfcn.h: present but cannot be compiled" >&2;} + { echo "$as_me:$LINENO: WARNING: dlfcn.h: check for missing prerequisite headers?" >&5 +echo "$as_me: WARNING: dlfcn.h: check for missing prerequisite headers?" >&2;} + { echo "$as_me:$LINENO: WARNING: dlfcn.h: proceeding with the preprocessor's result" >&5 +echo "$as_me: WARNING: dlfcn.h: proceeding with the preprocessor's result" >&2;} + ( + cat <<\_ASBOX +## ------------------------------------ ## +## Report this to bug-autoconf@gnu.org. ## +## ------------------------------------ ## +_ASBOX + ) | + sed "s/^/$as_me: WARNING: /" >&2 + ;; +esac +echo "$as_me:$LINENO: checking for dlfcn.h" >&5 +echo $ECHO_N "checking for dlfcn.h... $ECHO_C" >&6 +if test "${ac_cv_header_dlfcn_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_cv_header_dlfcn_h=$ac_header_preproc +fi +echo "$as_me:$LINENO: result: $ac_cv_header_dlfcn_h" >&5 +echo "${ECHO_T}$ac_cv_header_dlfcn_h" >&6 + +fi +if test $ac_cv_header_dlfcn_h = yes; then + + # NetBSD/SPARC needs -fPIC, -fpic will not do. + SHLIB_CFLAGS="-fPIC" + SHLIB_LD="ld -Bshareable -x" + SHLIB_LD_LIBS="" + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="" + LDFLAGS="" + LD_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' + echo "$as_me:$LINENO: checking for ELF" >&5 +echo $ECHO_N "checking for ELF... $ECHO_C" >&6 + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +#ifdef __ELF__ + yes +#endif + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "yes" >/dev/null 2>&1; then + echo "$as_me:$LINENO: result: yes" >&5 +echo "${ECHO_T}yes" >&6 + SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}\$\{DBGX\}.so' +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 + SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}\$\{DBGX\}.so.1.0' + +fi +rm -f conftest* + + +else + + SHLIB_CFLAGS="" + SHLIB_LD="echo tclLdAout $CC \{$SHLIB_CFLAGS\} | `pwd`/tclsh -r" + SHLIB_LD_LIBS='${LIBS}' + SHLIB_SUFFIX=".a" + DL_OBJS="tclLoadAout.o" + DL_LIBS="" + LDFLAGS="" + LD_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}' + SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}\$\{DBGX\}.a' + +fi + + + + # FreeBSD doesn't handle version numbers with dots. + + UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}\$\{DBGX\}.a' + TCL_LIB_VERSIONS_OK=nodots + ;; + OpenBSD-*) + SHLIB_LD="${CC} -shared" + SHLIB_LD_LIBS='${LIBS}' + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="" + LDFLAGS="" + LD_SEARCH_FLAGS="" + echo "$as_me:$LINENO: checking for ELF" >&5 +echo $ECHO_N "checking for ELF... $ECHO_C" >&6 + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +#ifdef __ELF__ + yes +#endif + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "yes" >/dev/null 2>&1; then + echo "$as_me:$LINENO: result: yes" >&5 +echo "${ECHO_T}yes" >&6 + SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}\$\{DBGX\}.so.1.0' +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 + SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}\$\{DBGX\}.so.1.0' + +fi +rm -f conftest* + + + # OpenBSD doesn't do version numbers with dots. + UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}\$\{DBGX\}.a' + TCL_LIB_VERSIONS_OK=nodots + ;; + FreeBSD-*) + # FreeBSD 3.* and greater have ELF. + SHLIB_CFLAGS="-fPIC" + SHLIB_LD="ld -Bshareable -x" + SHLIB_LD_LIBS='${LIBS}' + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="" + LDFLAGS="-export-dynamic" + LD_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' + if test "${TCL_THREADS}" = "1" ; then + # The -pthread needs to go in the CFLAGS, not LIBS + LIBS=`echo $LIBS | sed s/-pthread//` + EXTRA_CFLAGS="-pthread" + LDFLAGS="$LDFLAGS -pthread" + fi + case $system in + FreeBSD-3.*) + # FreeBSD-3 doesn't handle version numbers with dots. + UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}\$\{DBGX\}.a' + SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}\$\{DBGX\}.so' + TCL_LIB_VERSIONS_OK=nodots + ;; + esac + ;; + Rhapsody-*|Darwin-*) + SHLIB_CFLAGS="-fno-common" + SHLIB_LD="cc -dynamiclib \${LDFLAGS}" + TCL_SHLIB_LD_EXTRAS="-compatibility_version ${TCL_MAJOR_VERSION} -current_version \${PACKAGE_VERSION} -install_name \${LIB_RUNTIME_DIR}/\${TCL_LIB_FILE} -prebind -seg1addr 0xa000000" + SHLIB_LD_LIBS='${LIBS}' + SHLIB_SUFFIX=".dylib" + DL_OBJS="tclLoadDyld.o" + DL_LIBS="" + LDFLAGS="-prebind" + LD_SEARCH_FLAGS="" + LD_LIBRARY_PATH_VAR="DYLD_LIBRARY_PATH" + CFLAGS_OPTIMIZE="-O3" + EXTRA_CFLAGS="-arch ppc -pipe" + ;; + NEXTSTEP-*) + SHLIB_CFLAGS="" + SHLIB_LD="cc -nostdlib -r" + SHLIB_LD_LIBS="" + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadNext.o" + DL_LIBS="" + LDFLAGS="" + LD_SEARCH_FLAGS="" + ;; + OS/390-*) + CFLAGS_OPTIMIZE="" # Optimizer is buggy + cat >>confdefs.h <<\_ACEOF +#define _OE_SOCKETS 1 +_ACEOF + # needed in sys/socket.h + ;; + OSF1-1.0|OSF1-1.1|OSF1-1.2) + # OSF/1 1.[012] from OSF, and derivatives, including Paragon OSF/1 + SHLIB_CFLAGS="" + # Hack: make package name same as library name + SHLIB_LD='ld -R -export :' + SHLIB_LD_LIBS="" + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadOSF.o" + DL_LIBS="" + LDFLAGS="" + LD_SEARCH_FLAGS="" + ;; + OSF1-1.*) + # OSF/1 1.3 from OSF using ELF, and derivatives, including AD2 + SHLIB_CFLAGS="-fPIC" + if test "$SHARED_BUILD" = "1" ; then + SHLIB_LD="ld -shared" + else + SHLIB_LD="ld -non_shared" + fi + SHLIB_LD_LIBS="" + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="" + LDFLAGS="" + LD_SEARCH_FLAGS="" + ;; + OSF1-V*) + # Digital OSF/1 + SHLIB_CFLAGS="" + if test "$SHARED_BUILD" = "1" ; then + SHLIB_LD='ld -shared -expect_unresolved "*"' + else + SHLIB_LD='ld -non_shared -expect_unresolved "*"' + fi + SHLIB_LD_LIBS="" + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="" + LDFLAGS="" + LD_SEARCH_FLAGS='-rpath ${LIB_RUNTIME_DIR}' + if test "$GCC" != "yes" ; then + EXTRA_CFLAGS="-DHAVE_TZSET -std1" + fi + # see pthread_intro(3) for pthread support on osf1, k.furukawa + if test "${TCL_THREADS}" = "1" ; then + EXTRA_CFLAGS="${EXTRA_CFLAGS} -DHAVE_PTHREAD_ATTR_SETSTACKSIZE" + EXTRA_CFLAGS="${EXTRA_CFLAGS} -DTCL_THREAD_STACK_MIN=PTHREAD_STACK_MIN*64" + LIBS=`echo $LIBS | sed s/-lpthreads//` + if test "$GCC" = "yes" ; then + LIBS="$LIBS -lpthread -lmach -lexc" + else + EXTRA_CFLAGS="${EXTRA_CFLAGS} -pthread" + LDFLAGS="-pthread" + fi + fi + + ;; + QNX-6*) + # QNX RTP + # This may work for all QNX, but it was only reported for v6. + SHLIB_CFLAGS="-fPIC" + SHLIB_LD="ld -Bshareable -x" + SHLIB_LD_LIBS="" + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + # dlopen is in -lc on QNX + DL_LIBS="" + LDFLAGS="" + LD_SEARCH_FLAGS="" + ;; + RISCos-*) + SHLIB_CFLAGS="-G 0" + SHLIB_LD="echo tclLdAout $CC \{$SHLIB_CFLAGS\} | `pwd`/tclsh -r -G 0" + SHLIB_LD_LIBS='${LIBS}' + SHLIB_SUFFIX=".a" + DL_OBJS="tclLoadAout.o" + DL_LIBS="" + LDFLAGS="-Wl,-D,08000000" + LD_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}' + ;; + SCO_SV-3.2*) + # Note, dlopen is available only on SCO 3.2.5 and greater. However, + # this test works, since "uname -s" was non-standard in 3.2.4 and + # below. + if test "$GCC" = "yes" ; then + SHLIB_CFLAGS="-fPIC -melf" + LDFLAGS="-melf -Wl,-Bexport" + else + SHLIB_CFLAGS="-Kpic -belf" + LDFLAGS="-belf -Wl,-Bexport" + fi + SHLIB_LD="ld -G" + SHLIB_LD_LIBS="" + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="" + LD_SEARCH_FLAGS="" + ;; + SINIX*5.4*) + SHLIB_CFLAGS="-K PIC" + SHLIB_LD="cc -G" + SHLIB_LD_LIBS="" + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="-ldl" + LDFLAGS="" + LD_SEARCH_FLAGS="" + ;; + SunOS-4*) + SHLIB_CFLAGS="-PIC" + SHLIB_LD="ld" + SHLIB_LD_LIBS="" + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="-ldl" + LDFLAGS="" + LD_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}' + + # SunOS can't handle version numbers with dots in them in library + # specs, like -ltcl7.5, so use -ltcl75 instead. Also, it + # requires an extra version number at the end of .so file names. + # So, the library has to have a name like libtcl75.so.1.0 + + SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}\$\{DBGX\}.so.1.0' + UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}\$\{DBGX\}.a' + TCL_LIB_VERSIONS_OK=nodots + ;; + SunOS-5.[0-6]*) + + # Note: If _REENTRANT isn't defined, then Solaris + # won't define thread-safe library routines. + + cat >>confdefs.h <<\_ACEOF +#define _REENTRANT 1 +_ACEOF + + cat >>confdefs.h <<\_ACEOF +#define _POSIX_PTHREAD_SEMANTICS 1 +_ACEOF + + + SHLIB_CFLAGS="-KPIC" + + # Note: need the LIBS below, otherwise Tk won't find Tcl's + # symbols when dynamically loaded into tclsh. + + SHLIB_LD_LIBS='${LIBS}' + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="-ldl" + LDFLAGS="" + if test "$GCC" = "yes" ; then + SHLIB_LD="$CC -shared" + LD_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}' + else + SHLIB_LD="/usr/ccs/bin/ld -G -z text" + LD_SEARCH_FLAGS='-R ${LIB_RUNTIME_DIR}' + fi + ;; + SunOS-5*) + + # Note: If _REENTRANT isn't defined, then Solaris + # won't define thread-safe library routines. + + cat >>confdefs.h <<\_ACEOF +#define _REENTRANT 1 +_ACEOF + + cat >>confdefs.h <<\_ACEOF +#define _POSIX_PTHREAD_SEMANTICS 1 +_ACEOF + + + SHLIB_CFLAGS="-KPIC" + LDFLAGS="" + + # Check to enable 64-bit flags for compiler/linker + if test "$do64bit" = "yes" ; then + arch=`isainfo` + if test "$arch" = "sparcv9 sparc" ; then + if test "$GCC" = "yes" ; then + { echo "$as_me:$LINENO: WARNING: \"64bit mode not supported with GCC on $system\"" >&5 +echo "$as_me: WARNING: \"64bit mode not supported with GCC on $system\"" >&2;} + else + do64bit_ok=yes + if test "$do64bitVIS" = "yes" ; then + EXTRA_CFLAGS="-xarch=v9a" + LDFLAGS="-xarch=v9a" + else + EXTRA_CFLAGS="-xarch=v9" + LDFLAGS="-xarch=v9" + fi + fi + else + { echo "$as_me:$LINENO: WARNING: \"64bit mode only supported sparcv9 system\"" >&5 +echo "$as_me: WARNING: \"64bit mode only supported sparcv9 system\"" >&2;} + fi + fi + + # Note: need the LIBS below, otherwise Tk won't find Tcl's + # symbols when dynamically loaded into tclsh. + + SHLIB_LD_LIBS='${LIBS}' + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="-ldl" + if test "$GCC" = "yes" ; then + SHLIB_LD="$CC -shared" + LD_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}' + else + SHLIB_LD="/usr/ccs/bin/ld -G -z text" + LD_SEARCH_FLAGS='-R ${LIB_RUNTIME_DIR}' + fi + ;; + ULTRIX-4.*) + SHLIB_CFLAGS="-G 0" + SHLIB_SUFFIX=".a" + SHLIB_LD="echo tclLdAout $CC \{$SHLIB_CFLAGS\} | `pwd`/tclsh -r -G 0" + SHLIB_LD_LIBS='${LIBS}' + DL_OBJS="tclLoadAout.o" + DL_LIBS="" + LDFLAGS="-Wl,-D,08000000" + LD_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}' + if test "$GCC" != "yes" ; then + EXTRA_CFLAGS="-DHAVE_TZSET -std1" + fi + ;; + UNIX_SV* | UnixWare-5*) + SHLIB_CFLAGS="-KPIC" + SHLIB_LD="cc -G" + SHLIB_LD_LIBS="" + SHLIB_SUFFIX=".so" + DL_OBJS="tclLoadDl.o" + DL_LIBS="-ldl" + # Some UNIX_SV* systems (unixware 1.1.2 for example) have linkers + # that don't grok the -Bexport option. Test that it does. + hold_ldflags=$LDFLAGS + echo "$as_me:$LINENO: checking for ld accepts -Bexport flag" >&5 +echo $ECHO_N "checking for ld accepts -Bexport flag... $ECHO_C" >&6 + LDFLAGS="${LDFLAGS} -Wl,-Bexport" + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ +int i; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + found=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +found=no +fi +rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext + LDFLAGS=$hold_ldflags + echo "$as_me:$LINENO: result: $found" >&5 +echo "${ECHO_T}$found" >&6 + if test $found = yes; then + LDFLAGS="-Wl,-Bexport" + else + LDFLAGS="" + fi + LD_SEARCH_FLAGS="" + ;; esac - echo $ac_n "checking for build with symbols""... $ac_c" 1>&6 -echo "configure:1694: checking for build with symbols" >&5 + if test "$do64bit" = "yes" -a "$do64bit_ok" = "no" ; then + { echo "$as_me:$LINENO: WARNING: \"64bit support being disabled -- don\'t know magic for this platform\"" >&5 +echo "$as_me: WARNING: \"64bit support being disabled -- don\'t know magic for this platform\"" >&2;} + fi + + # Step 4: If pseudo-static linking is in use (see K. B. Kenny, "Dynamic + # Loading for Tcl -- What Became of It?". Proc. 2nd Tcl/Tk Workshop, + # New Orleans, LA, Computerized Processes Unlimited, 1994), then we need + # to determine which of several header files defines the a.out file + # format (a.out.h, sys/exec.h, or sys/exec_aout.h). At present, we + # support only a file format that is more or less version-7-compatible. + # In particular, + # - a.out files must begin with `struct exec'. + # - the N_TXTOFF on the `struct exec' must compute the seek address + # of the text segment + # - The `struct exec' must contain a_magic, a_text, a_data, a_bss + # and a_entry fields. + # The following compilation should succeed if and only if either sys/exec.h + # or a.out.h is usable for the purpose. + # + # Note that the modified COFF format used on MIPS Ultrix 4.x is usable; the + # `struct exec' includes a second header that contains information that + # duplicates the v7 fields that are needed. + + if test "x$DL_OBJS" = "xtclLoadAout.o" ; then + echo "$as_me:$LINENO: checking sys/exec.h" >&5 +echo $ECHO_N "checking sys/exec.h... $ECHO_C" >&6 + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +int +main () +{ + + struct exec foo; + unsigned long seek; + int flag; +#if defined(__mips) || defined(mips) + seek = N_TXTOFF (foo.ex_f, foo.ex_o); +#else + seek = N_TXTOFF (foo); +#endif + flag = (foo.a_magic == OMAGIC); + return foo.a_text + foo.a_data + foo.a_bss + foo.a_entry; + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + tcl_ok=usable +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +tcl_ok=unusable +fi +rm -f conftest.$ac_objext conftest.$ac_ext + echo "$as_me:$LINENO: result: $tcl_ok" >&5 +echo "${ECHO_T}$tcl_ok" >&6 + if test $tcl_ok = usable; then + cat >>confdefs.h <<\_ACEOF +#define USE_SYS_EXEC_H 1 +_ACEOF + + else + echo "$as_me:$LINENO: checking a.out.h" >&5 +echo $ECHO_N "checking a.out.h... $ECHO_C" >&6 + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +int +main () +{ + + struct exec foo; + unsigned long seek; + int flag; +#if defined(__mips) || defined(mips) + seek = N_TXTOFF (foo.ex_f, foo.ex_o); +#else + seek = N_TXTOFF (foo); +#endif + flag = (foo.a_magic == OMAGIC); + return foo.a_text + foo.a_data + foo.a_bss + foo.a_entry; + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + tcl_ok=usable +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +tcl_ok=unusable +fi +rm -f conftest.$ac_objext conftest.$ac_ext + echo "$as_me:$LINENO: result: $tcl_ok" >&5 +echo "${ECHO_T}$tcl_ok" >&6 + if test $tcl_ok = usable; then + cat >>confdefs.h <<\_ACEOF +#define USE_A_OUT_H 1 +_ACEOF + + else + echo "$as_me:$LINENO: checking sys/exec_aout.h" >&5 +echo $ECHO_N "checking sys/exec_aout.h... $ECHO_C" >&6 + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +int +main () +{ + + struct exec foo; + unsigned long seek; + int flag; +#if defined(__mips) || defined(mips) + seek = N_TXTOFF (foo.ex_f, foo.ex_o); +#else + seek = N_TXTOFF (foo); +#endif + flag = (foo.a_midmag == OMAGIC); + return foo.a_text + foo.a_data + foo.a_bss + foo.a_entry; + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest.$ac_objext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + tcl_ok=usable +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +tcl_ok=unusable +fi +rm -f conftest.$ac_objext conftest.$ac_ext + echo "$as_me:$LINENO: result: $tcl_ok" >&5 +echo "${ECHO_T}$tcl_ok" >&6 + if test $tcl_ok = usable; then + cat >>confdefs.h <<\_ACEOF +#define USE_SYS_EXEC_AOUT_H 1 +_ACEOF + + else + DL_OBJS="" + fi + fi + fi + fi + + # Step 5: disable dynamic loading if requested via a command-line switch. + + # Check whether --enable-load or --disable-load was given. +if test "${enable_load+set}" = set; then + enableval="$enable_load" + tcl_ok=$enableval +else + tcl_ok=yes +fi; + if test "$tcl_ok" = "no"; then + DL_OBJS="" + fi + + if test "x$DL_OBJS" != "x" ; then + BUILD_DLTEST="\$(DLTEST_TARGETS)" + else + echo "Can't figure out how to do dynamic loading or shared libraries" + echo "on this system." + SHLIB_CFLAGS="" + SHLIB_LD="" + SHLIB_SUFFIX="" + DL_OBJS="tclLoadNone.o" + DL_LIBS="" + LDFLAGS="" + LD_SEARCH_FLAGS="" + BUILD_DLTEST="" + fi + + # If we're running gcc, then change the C flags for compiling shared + # libraries to the right flags for gcc, instead of those for the + # standard manufacturer compiler. + + if test "$DL_OBJS" != "tclLoadNone.o" ; then + if test "$GCC" = "yes" ; then + case $system in + AIX-*) + ;; + BSD/OS*) + ;; + IRIX*) + ;; + NetBSD-*|FreeBSD-*) + ;; + Rhapsody-*|Darwin-*) + ;; + RISCos-*) + ;; + SCO_SV-3.2*) + ;; + ULTRIX-4.*) + ;; + windows) + ;; + *) + SHLIB_CFLAGS="-fPIC" + ;; + esac + fi + fi + + if test "$SHARED_LIB_SUFFIX" = "" ; then + SHARED_LIB_SUFFIX='${PACKAGE_VERSION}\$\{DBGX\}${SHLIB_SUFFIX}' + fi + if test "$UNSHARED_LIB_SUFFIX" = "" ; then + UNSHARED_LIB_SUFFIX='${PACKAGE_VERSION}\$\{DBGX\}.a' + fi + + + + + + + + + + + + + + + + + +#-------------------------------------------------------------------- +# Set the default compiler switches based on the --enable-symbols option. +#-------------------------------------------------------------------- + + + + + if test "${TEA_PLATFORM}" = "windows" ; then + tcl_dbgx=d + else + tcl_dbgx=g + fi + + echo "$as_me:$LINENO: checking for build with symbols" >&5 +echo $ECHO_N "checking for build with symbols... $ECHO_C" >&6 # Check whether --enable-symbols or --disable-symbols was given. if test "${enable_symbols+set}" = set; then enableval="$enable_symbols" tcl_ok=$enableval else tcl_ok=no -fi - - if test "$tcl_ok" = "yes"; then - CFLAGS_DEFAULT="${CFLAGS_DEBUG}" - LDFLAGS_DEFAULT="${LDFLAGS_DEBUG}" - DBGX=${tcl_dbgx} - TCL_DBGX=${tcl_dbgx} - echo "$ac_t""yes" 1>&6 - else +fi; + if test "$tcl_ok" = "no"; then CFLAGS_DEFAULT="${CFLAGS_OPTIMIZE}" LDFLAGS_DEFAULT="${LDFLAGS_OPTIMIZE}" DBGX="" TCL_DBGX="" - echo "$ac_t""no" 1>&6 + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 + else + CFLAGS_DEFAULT="${CFLAGS_DEBUG}" + LDFLAGS_DEFAULT="${LDFLAGS_DEBUG}" + DBGX=${tcl_dbgx} + TCL_DBGX=${tcl_dbgx} + if test "$tcl_ok" = "yes"; then + echo "$as_me:$LINENO: result: yes (standard debugging)" >&5 +echo "${ECHO_T}yes (standard debugging)" >&6 + fi + fi + if test "${TEA_PLATFORM}" != "windows" ; then + LDFLAGS_DEFAULT="${LDFLAGS}" + fi + + + + + + if test "$tcl_ok" = "mem" -o "$tcl_ok" = "all"; then + cat >>confdefs.h <<\_ACEOF +#define TCL_MEM_DEBUG 1 +_ACEOF + + fi + + if test "$tcl_ok" != "yes" -a "$tcl_ok" != "no"; then + if test "$tcl_ok" = "all"; then + echo "$as_me:$LINENO: result: enabled symbols mem debugging" >&5 +echo "${ECHO_T}enabled symbols mem debugging" >&6 + else + echo "$as_me:$LINENO: result: enabled $tcl_ok debugging" >&5 +echo "${ECHO_T}enabled $tcl_ok debugging" >&6 + fi fi - - - - - -if test "${SHARED_BUILD}" = "1" ; then - CFLAGS='${CFLAGS_DEFAULT} ${CFLAGS_WARNING} ${SHLIB_CFLAGS}' -else - CFLAGS='${CFLAGS_DEFAULT} ${CFLAGS_WARNING}' -fi #-------------------------------------------------------------------- # Everyone should be linking against the Tcl stub library. If you # can't for some reason, remove this definition. If you aren't using # stubs, you also need to modify the SHLIB_LD_LIBS setting below to -# link against the non-stubbed Tcl library. +# link against the non-stubbed Tcl library. Add Tk too if necessary. #-------------------------------------------------------------------- -cat >> confdefs.h <<\EOF +cat >>confdefs.h <<\_ACEOF #define USE_TCL_STUBS 1 -EOF +_ACEOF + +#-------------------------------------------------------------------- +# If the variable OPENSSL is set, we will build with the OpenSSL +# libraries. If it is not set, then we will use RSA BSAFE SSL-C +# libraries instead of the default OpenSSL libaries. +#-------------------------------------------------------------------- + +OPENSSL="1" + + + +#-------------------------------------------------------------------- +# If the variable OPENSSL is set, we will build with the OpenSSL +# libraries. If it is not set, then we will use RSA BSAFE SSL-C +# libraries instead of the default OpenSSL libaries. +#-------------------------------------------------------------------- + + # Check whether --enable-bsafe or --disable-bsafe was given. +if test "${enable_bsafe+set}" = set; then + enableval="$enable_bsafe" + OPENSSL="" +else + OPENSSL="1" +fi; + +#-------------------------------------------------------------------- +# Establish the location of the root directory for OpenSSL. +# If we're not using OpenSSL, set the root for BSAFE SSL-C. +# If we're using BSAFE, define the BSAFE compiler flag. +# The "FLAT_INC" flag is used in the BSAFE ssl.h header file and +# doesn't seem to be referenced anywhere else. +#-------------------------------------------------------------------- + if test -n "${OPENSSL}"; then + SSL_DIR='/usr/local/ssl' + cat >>confdefs.h <<\_ACEOF +#define NO_IDEA 1 +_ACEOF + + cat >>confdefs.h <<\_ACEOF +#define NO_RC5 1 +_ACEOF + + else + SSL_DIR='/use/local/sslc' + cat >>confdefs.h <<\_ACEOF +#define BSAFE 1 +_ACEOF + + cat >>confdefs.h <<\_ACEOF +#define FLAT_INC 1 +_ACEOF + + fi + + echo "$as_me:$LINENO: checking for SSL directory" >&5 +echo $ECHO_N "checking for SSL directory... $ECHO_C" >&6 + + +# Check whether --with-ssl-dir or --without-ssl-dir was given. +if test "${with_ssl_dir+set}" = set; then + withval="$with_ssl_dir" + with_ssldir=${withval} +fi; + + if test "${ac_cv_c_ssldir+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + + # Use the value from --with-ssl-dir, if it was given + if test x"${with_ssldir}" != x ; then + if test -d "${with_ssldir}" ; then + ac_cv_c_ssldir=${with_ssldir} + else + { { echo "$as_me:$LINENO: error: ${with_ssldir} is not a valid directory" >&5 +echo "$as_me: error: ${with_ssldir} is not a valid directory" >&2;} + { (exit 1); exit 1; }; } + fi + else + list="`ls -d ${SSL_DIR} 2>/dev/null`" + for i in $list ; do + if test -d "$i" ; then + ac_cv_c_ssldir=$i + break + fi + done + fi + +fi + + + # Print a message based on how we determined the include path + + if test x"${ac_cv_c_ssldir}" = x ; then + { { echo "$as_me:$LINENO: error: Could not find SSL directory. +Please specify its location with --with-ssl-dir" >&5 +echo "$as_me: error: Could not find SSL directory. +Please specify its location with --with-ssl-dir" >&2;} + { (exit 1); exit 1; }; } + else + SSL_DIR=${ac_cv_c_ssldir} + echo "$as_me:$LINENO: result: ${SSL_DIR}" >&5 +echo "${ECHO_T}${SSL_DIR}" >&6 + fi + + #-------------------------------------------------------------------- + # If we're using RSA BSAFE SSL-C, we need to establish what platform + # we're running on before we can figure out some paths. + # This step isn't necessary if we're using OpenSSL. + #-------------------------------------------------------------------- + + if test -z "${OPENSSL}"; then + echo "$as_me:$LINENO: checking host type" >&5 +echo $ECHO_N "checking host type... $ECHO_C" >&6 + case "`uname -s`" in + *win32* | *WIN32* | *CYGWIN_NT*|*CYGWIN_98*|*CYGWIN_95*) + PLATFORM=WIN32 + ;; + *SunOS*) + PLATFORM=SOLARIS + ;; + HP-UX) + PLATFORM=HPUX + ;; + *) + PLATFORM=LINUX + ;; + esac + echo "$as_me:$LINENO: result: ${PLATFORM}" >&5 +echo "${ECHO_T}${PLATFORM}" >&6 + fi + + #-------------------------------------------------------------------- + # The OpenSSL and BSAFE SSL-C directory structures differ. + #-------------------------------------------------------------------- + + if test -n "${OPENSSL}"; then + SSL_LIB_DIR=${SSL_DIR}/lib + SSL_INCLUDE_DIR=${SSL_DIR}/include + if test ! -f "${SSL_INCLUDE_DIR}/openssl/opensslv.h"; then + { { echo "$as_me:$LINENO: error: bad ssl-dir: cannot find openssl/opensslv.h under ${SSL_INCLUDE_DIR}" >&5 +echo "$as_me: error: bad ssl-dir: cannot find openssl/opensslv.h under ${SSL_INCLUDE_DIR}" >&2;} + { (exit 1); exit 1; }; } + fi + else + SSL_LIB_DIR=${SSL_DIR}/${PLATFORM}/library/lib + SSL_INCLUDE_DIR=${SSL_DIR}/${PLATFORM}/library/include + if test ! -f "${SSL_INCLUDE_DIR}/crypto.h"; then + { { echo "$as_me:$LINENO: error: bad ssl-dir: cannot find crypto.h under ${SSL_INCLUDE_DIR}" >&5 +echo "$as_me: error: bad ssl-dir: cannot find crypto.h under ${SSL_INCLUDE_DIR}" >&2;} + { (exit 1); exit 1; }; } + fi + fi + + + + + + SSL_INCLUDE_DIR_NATIVE=\"`${CYGPATH} ${SSL_INCLUDE_DIR}`\" + + + #-------------------------------------------------------------------- + # If OpenSSL was built with gcc then there may be some symbols that need + # resolving before we can load it into tclsh (__udivd3i on solaris. + # Let the user specify if we need to add libgcc to the link line to + # resolve these symbols. + # + # This doesn't seem to be necessary if the RSA BSAFE SSL-C libraries + # are used instead of OpenSSL. + #-------------------------------------------------------------------- + + if test -n "${OPENSSL}"; then + + echo "$as_me:$LINENO: checking if libgcc is needed to resolve openssl symbols" >&5 +echo $ECHO_N "checking if libgcc is needed to resolve openssl symbols... $ECHO_C" >&6 + + +# Check whether --with-gcclib or --without-gcclib was given. +if test "${with_gcclib+set}" = set; then + withval="$with_gcclib" + GCCLIB="-lgcc" +else + GCCLIB="" +fi; + + if test "x${GCCLIB}" = "x" ; then + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 + else + echo "$as_me:$LINENO: result: yes" >&5 +echo "${ECHO_T}yes" >&6 + echo "$as_me:$LINENO: checking for gcc library location" >&5 +echo $ECHO_N "checking for gcc library location... $ECHO_C" >&6 + GCCPATH=`${CC} -print-libgcc-file-name | sed -e 's#[^/]*0#'` + GCCPATH="-L${GCCPATH}" + echo "$as_me:$LINENO: result: ${GCCPATH}" >&5 +echo "${ECHO_T}${GCCPATH}" >&6 + fi + fi + + + +#-------------------------------------------------------------------- +# Determine if we should use the patented encryption code +#-------------------------------------------------------------------- + +# Check whether --enable-patents or --disable-patents was given. +if test "${enable_patents+set}" = set; then + enableval="$enable_patents" + PATENTS=${enableval} +else + PATENTS=yes +fi; + +if test ${PATENTS} = no; then + cat >>confdefs.h <<\_ACEOF +#define NO_PATENTS 1 +_ACEOF + +fi #-------------------------------------------------------------------- # This macro generates a line to use when building a library. It -# depends on values set by the SC_ENABLE_SHARED, SC_ENABLE_SYMBOLS, -# and SC_LOAD_TCLCONFIG macros above. -#-------------------------------------------------------------------- - - - case "`uname -s`" in - *win32* | *WIN32* | *CYGWIN_NT* |*CYGWIN_98*|*CYGWIN_95*) - if test "${CC-cc}" = "cl"; then - MAKE_STATIC_LIB="\${STLIB_LD} -out:\$@ \$(\$@_OBJECTS) " - MAKE_SHARED_LIB="\${SHLIB_LD} \${SHLIB_LDFLAGS} \${SHLIB_LD_LIBS} \$(LDFLAGS) -out:\$@ \$(\$@_OBJECTS) " - fi - ;; - *) - MAKE_STATIC_LIB="\${STLIB_LD} \$@ \$(\$@_OBJECTS)" - MAKE_SHARED_LIB="\${SHLIB_LD} -o \$@ \$(\$@_OBJECTS) \${SHLIB_LDFLAGS} \${SHLIB_LD_LIBS}" - ;; - esac - - if test "${SHARED_BUILD}" = "1" ; then - MAKE_LIB=${MAKE_SHARED_LIB} - else - MAKE_LIB=${MAKE_STATIC_LIB} - fi - - - - - - -#-------------------------------------------------------------------- -# eval these two values to dereference the ${DBGX} variable. -#-------------------------------------------------------------------- - -eval "SHARED_LIB_SUFFIX=${TCL_SHARED_LIB_SUFFIX}" -eval "UNSHARED_LIB_SUFFIX=${TCL_UNSHARED_LIB_SUFFIX}" +# depends on values set by the TEA_ENABLE_SHARED, TEA_ENABLE_SYMBOLS, +# and TEA_LOAD_TCLCONFIG macros above. +#-------------------------------------------------------------------- + + + if test "${TEA_PLATFORM}" = "windows" -a "$GCC" != "yes"; then + MAKE_STATIC_LIB="\${STLIB_LD} -out:\$@ \$(PKG_OBJECTS)" + MAKE_SHARED_LIB="\${SHLIB_LD} \${SHLIB_LD_FLAGS} \${SHLIB_LD_LIBS} \$(LDFLAGS) -out:\$@ \$(PKG_OBJECTS)" + MAKE_STUB_LIB="\${STLIB_LD} -out:\$@ \$(PKG_STUB_OBJECTS)" + else + MAKE_STATIC_LIB="\${STLIB_LD} \$@ \$(PKG_OBJECTS)" + MAKE_SHARED_LIB="\${SHLIB_LD} -o \$@ \$(PKG_OBJECTS) \${SHLIB_LD_FLAGS} \${SHLIB_LD_LIBS}" + MAKE_STUB_LIB="\${STLIB_LD} \$@ \$(PKG_STUB_OBJECTS)" + fi + + if test "${SHARED_BUILD}" = "1" ; then + MAKE_LIB="${MAKE_SHARED_LIB} " + else + MAKE_LIB="${MAKE_STATIC_LIB} " + fi + + #-------------------------------------------------------------------- + # Shared libraries and static libraries have different names. + # Use the double eval to make sure the ${DBGX} in the suffix is + # substituted. + #-------------------------------------------------------------------- + + RANLIB_STUB="${RANLIB}" + if test "${TEA_PLATFORM}" = "windows" ; then + if test "${SHARED_BUILD}" = "1" ; then + # We force the unresolved linking of symbols that are really in + # the private libraries of Tcl and Tk. + SHLIB_LD_LIBS="${SHLIB_LD_LIBS} \"`${CYGPATH} ${TCL_BIN_DIR}/${TCL_STUB_LIB_FILE}`\"" + if test x"${TK_BIN_DIR}" != x ; then + SHLIB_LD_LIBS="${SHLIB_LD_LIBS} \"`${CYGPATH} ${TK_BIN_DIR}/${TK_STUB_LIB_FILE}`\"" + fi + eval eval "PKG_LIB_FILE=${PACKAGE_NAME}${SHARED_LIB_SUFFIX}" + RANLIB=: + else + eval eval "PKG_LIB_FILE=${PACKAGE_NAME}${UNSHARED_LIB_SUFFIX}" + fi + # Some packages build there own stubs libraries + eval eval "PKG_STUB_LIB_FILE=${PACKAGE_NAME}stub${UNSHARED_LIB_SUFFIX}" + else + if test "${SHARED_BUILD}" = "1" ; then + SHLIB_LD_LIBS="${SHLIB_LD_LIBS} ${TCL_STUB_LIB_SPEC}" + if test x"${TK_BIN_DIR}" != x ; then + SHLIB_LD_LIBS="${SHLIB_LD_LIBS} ${TK_STUB_LIB_SPEC}" + fi + eval eval "PKG_LIB_FILE=lib${PACKAGE_NAME}${SHARED_LIB_SUFFIX}" + RANLIB=: + else + eval eval "PKG_LIB_FILE=lib${PACKAGE_NAME}${UNSHARED_LIB_SUFFIX}" + fi + # Some packages build there own stubs libraries + eval eval "PKG_STUB_LIB_FILE=lib${PACKAGE_NAME}stub${UNSHARED_LIB_SUFFIX}" + fi + + # These are escaped so that only CFLAGS is picked up at configure time. + # The other values will be substituted at make time. + CFLAGS="${CFLAGS} \${CFLAGS_DEFAULT} \${CFLAGS_WARNING}" + if test "${SHARED_BUILD}" = "1" ; then + CFLAGS="${CFLAGS} \${SHLIB_CFLAGS}" + fi + + + + + + + #-------------------------------------------------------------------- # Shared libraries and static libraries have different names. # Also, windows libraries and unix libraries have different names. # For the OpenSSL version, I chose to use the same library names that # OpenSSL uses as its default names. #-------------------------------------------------------------------- if test -n "${OPENSSL}"; then - - case "`uname -s`" in - *win32* | *WIN32* | *CYGWIN_NT*|*CYGWIN_98*|*CYGWIN_95*) - if test "${SHARED_BUILD}" = "1" ; then - SHLIB_LD_LIBS="\"`${CYGPATH} ${TCL_BIN_DIR}/${TCL_STUB_LIB_FILE}`\" ${TCL_SHLIB_LD_LIBS} \"`${CYGPATH} ${SSL_LIB_DIR}/ssleay32.lib`\" \"`${CYGPATH} ${SSL_LIB_DIR}/libeay32.lib`\"" - eval "${PACKAGE}_LIB_FILE=${PACKAGE}${SHARED_LIB_SUFFIX}" - RANLIB=: - else - eval "${PACKAGE}_LIB_FILE=${PACKAGE}${UNSHARED_LIB_SUFFIX}" - fi - ;; - *) - if test "${SHARED_BUILD}" = "1" ; then - SHLIB_LD_LIBS="${TCL_STUB_LIB_SPEC} -L${SSL_LIB_DIR} -lssl -L${SSL_LIB_DIR} -lcrypto ${GCCPATH} ${GCCLIB}" - eval "${PACKAGE}_LIB_FILE=lib${PACKAGE}${SHARED_LIB_SUFFIX}" - RANLIB=: - else - eval "${PACKAGE}_LIB_FILE=lib${PACKAGE}${UNSHARED_LIB_SUFFIX}" - fi - ;; - esac -else - case "`uname -s`" in - *win32* | *WIN32* | *CYGWIN_NT*|*CYGWIN_98*|*CYGWIN_95*) - if test "${SHARED_BUILD}" = "1" ; then - SHLIB_LD_LIBS="\"`${CYGPATH} ${TCL_BIN_DIR}/${TCL_STUB_LIB_FILE}`\" ${TCL_SHLIB_LD_LIBS} \"`${CYGPATH} ${SSL_LIB_DIR}/sslc32.lib`\"" - eval "${PACKAGE}_LIB_FILE=${PACKAGE}${SHARED_LIB_SUFFIX}" - RANLIB=: - else - eval "${PACKAGE}_LIB_FILE=${PACKAGE}${UNSHARED_LIB_SUFFIX}" - fi - ;; - *) - if test "${SHARED_BUILD}" = "1" ; then - SHLIB_LD_LIBS="${TCL_STUB_LIB_SPEC} -L${SSL_LIB_DIR} -lsslc" - eval "${PACKAGE}_LIB_FILE=lib${PACKAGE}${SHARED_LIB_SUFFIX}" - RANLIB=: - else - eval "${PACKAGE}_LIB_FILE=lib${PACKAGE}${UNSHARED_LIB_SUFFIX}" - fi - ;; - esac -fi - - - + if test "${TEA_PLATFORM}" = "windows" ; then + + vars="-L\"`${CYGPATH} ${SSL_LIB_DIR}`\" -lssleay32.lib -llibeay32.lib" + for i in $vars; do + PKG_LIBS="$PKG_LIBS $i" + done + + + else + + vars="-L${SSL_LIB_DIR} -lssl -lcrypto ${GCCPATH} ${GCCLIB}" + for i in $vars; do + PKG_LIBS="$PKG_LIBS $i" + done + + + fi +else + if test "${TEA_PLATFORM}" = "windows" ; then + + vars="-L\"`${CYGPATH} ${SSL_LIB_DIR}`\" -lsslc32.lib" + for i in $vars; do + PKG_LIBS="$PKG_LIBS $i" + done + + + else + + vars="-L${SSL_LIB_DIR} -lsslc" + for i in $vars; do + PKG_LIBS="$PKG_LIBS $i" + done + + + fi +fi #-------------------------------------------------------------------- # Find tclsh so that we can run pkg_mkIndex to generate the pkgIndex.tcl # file during the install process. Don't run the TCLSH_PROG through # ${CYGPATH} because it's being used directly by make. # Require that we use a tclsh shell version 8.2 or later since earlier # versions have bugs in the pkg_mkIndex routine. +# Add WISH as well if this is a Tk extension. #-------------------------------------------------------------------- - echo $ac_n "checking for tclsh""... $ac_c" 1>&6 -echo "configure:1843: checking for tclsh" >&5 + echo "$as_me:$LINENO: checking for tclsh" >&5 +echo $ECHO_N "checking for tclsh... $ECHO_C" >&6 - if eval "test \"`echo '$''{'ac_cv_path_tclsh'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 + if test "${ac_cv_path_tclsh+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 else - - search_path=`echo ${exec_prefix}/bin:${prefix}/bin:${TCL_BIN_DIR}:${TCL_BIN_DIR}/../bin:${PATH} | sed -e 's/:/ /g'` + + if test "x${CELIB_DIR}" != "x" ; then + # If CELIB_DIR is defined, assume Windows/CE target is requested + # which means target tclsh cannot be run (cross-compile) + search_path=`echo ${PATH} | sed -e 's/:/ /g'` + else + search_path=`echo ${TCL_BIN_DIR}:${TCL_BIN_DIR}/../bin:${exec_prefix}/bin:${prefix}/bin:${PATH} | sed -e 's/:/ /g'` + fi for dir in $search_path ; do for j in `ls -r $dir/tclsh[8-9]*${EXEEXT} 2> /dev/null` \ `ls -r $dir/tclsh*${EXEEXT} 2> /dev/null` ; do if test x"$ac_cv_path_tclsh" = x ; then if test -f "$j" ; then @@ -1855,328 +9465,970 @@ break fi fi done done - + fi if test -f "$ac_cv_path_tclsh" ; then TCLSH_PROG=$ac_cv_path_tclsh - echo "$ac_t""$TCLSH_PROG" 1>&6 + echo "$as_me:$LINENO: result: $TCLSH_PROG" >&5 +echo "${ECHO_T}$TCLSH_PROG" >&6 else - { echo "configure: error: No tclsh found in PATH: $search_path" 1>&2; exit 1; } + { { echo "$as_me:$LINENO: error: No tclsh found in PATH: $search_path" >&5 +echo "$as_me: error: No tclsh found in PATH: $search_path" >&2;} + { (exit 1); exit 1; }; } fi - + #-------------------------------------------------------------------- # Finally, substitute all of the various values into the Makefile. #-------------------------------------------------------------------- -trap '' 1 2 15 -cat > confcache <<\EOF + ac_config_files="$ac_config_files Makefile" +cat >confcache <<\_ACEOF # This file is a shell script that caches the results of configure # tests run on this system so they can be shared between configure -# scripts and configure runs. It is not useful on other systems. -# If it contains results you don't want to keep, you may remove or edit it. -# -# By default, configure uses ./config.cache as the cache file, -# creating it if it does not exist already. You can give configure -# the --cache-file=FILE option to use a different cache file; that is -# what configure does when it calls configure scripts in -# subdirectories, so they share the cache. -# Giving --cache-file=/dev/null disables caching, for debugging configure. -# config.status only pays attention to the cache file if you give it the -# --recheck option to rerun configure. -# -EOF +# scripts and configure runs, see configure's option --config-cache. +# It is not useful on other systems. If it contains results you don't +# want to keep, you may remove or edit it. +# +# config.status only pays attention to the cache file if you give it +# the --recheck option to rerun configure. +# +# `ac_cv_env_foo' variables (set or unset) will be overridden when +# loading this file, other *unset* `ac_cv_foo' will be assigned the +# following values. + +_ACEOF + # The following way of writing the cache mishandles newlines in values, # but we know of no workaround that is simple, portable, and efficient. # So, don't put newlines in cache variables' values. # Ultrix sh set writes to stderr and can't be redirected directly, # and sets the high bit in the cache file unless we assign to the vars. -(set) 2>&1 | - case `(ac_space=' '; set | grep ac_space) 2>&1` in - *ac_space=\ *) - # `set' does not quote correctly, so add quotes (double-quote substitution - # turns \\\\ into \\, and sed turns \\ into \). - sed -n \ - -e "s/'/'\\\\''/g" \ - -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p" - ;; - *) - # `set' quotes correctly as required by POSIX, so do not add quotes. - sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p' - ;; - esac >> confcache -if cmp -s $cache_file confcache; then - : -else +{ + (set) 2>&1 | + case `(ac_space=' '; set | grep ac_space) 2>&1` in + *ac_space=\ *) + # `set' does not quote correctly, so add quotes (double-quote + # substitution turns \\\\ into \\, and sed turns \\ into \). + sed -n \ + "s/'/'\\\\''/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" + ;; + *) + # `set' quotes correctly as required by POSIX, so do not add quotes. + sed -n \ + "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" + ;; + esac; +} | + sed ' + t clear + : clear + s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ + t end + /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ + : end' >>confcache +if diff $cache_file confcache >/dev/null 2>&1; then :; else if test -w $cache_file; then - echo "updating cache $cache_file" - cat confcache > $cache_file + test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file" + cat confcache >$cache_file else echo "not updating unwritable cache $cache_file" fi fi rm -f confcache -trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15 - test "x$prefix" = xNONE && prefix=$ac_default_prefix # Let make expand exec_prefix. test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' -# Any assignment to VPATH causes Sun make to only execute -# the first set of double-colon rules, so remove it if not needed. -# If there is a colon in the path, we need to keep it. +# VPATH may cause trouble with some makes, so we remove $(srcdir), +# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and +# trailing colons and then remove the whole line if VPATH becomes empty +# (actually we leave an empty line to preserve line numbers). if test "x$srcdir" = x.; then - ac_vpsub='/^[ ]*VPATH[ ]*=[^:]*$/d' + ac_vpsub='/^[ ]*VPATH[ ]*=/{ +s/:*\$(srcdir):*/:/; +s/:*\${srcdir}:*/:/; +s/:*@srcdir@:*/:/; +s/^\([^=]*=[ ]*\):*/\1/; +s/:*$//; +s/^[^=]*=[ ]*$//; +}' fi -trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15 - # Transform confdefs.h into DEFS. # Protect against shell expansion while executing Makefile rules. # Protect against Makefile macro expansion. -cat > conftest.defs <<\EOF -s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g -s%[ `~#$^&*(){}\\|;'"<>?]%\\&%g -s%\[%\\&%g -s%\]%\\&%g -s%\$%$$%g -EOF -DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '` -rm -f conftest.defs - - -# Without the "./", some shells look in PATH for config.status. -: ${CONFIG_STATUS=./config.status} - -echo creating $CONFIG_STATUS -rm -f $CONFIG_STATUS -cat > $CONFIG_STATUS </dev/null | sed 1q`: -# -# $0 $ac_configure_args -# -# Compiler output produced by configure, useful for debugging -# configure, is in ./config.log if it exists. - -ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]" -for ac_option -do - case "\$ac_option" in - -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) - echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion" - exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;; - -version | --version | --versio | --versi | --vers | --ver | --ve | --v) - echo "$CONFIG_STATUS generated by autoconf version 2.13" - exit 0 ;; - -help | --help | --hel | --he | --h) - echo "\$ac_cs_usage"; exit 0 ;; - *) echo "\$ac_cs_usage"; exit 1 ;; - esac -done - -ac_given_srcdir=$srcdir -ac_given_INSTALL="$INSTALL" - -trap 'rm -fr `echo "Makefile \ - pkgIndex.tcl" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15 -EOF -cat >> $CONFIG_STATUS < conftest.subs <<\\CEOF -$ac_vpsub -$extrasub -s%@SHELL@%$SHELL%g -s%@CFLAGS@%$CFLAGS%g -s%@CPPFLAGS@%$CPPFLAGS%g -s%@CXXFLAGS@%$CXXFLAGS%g -s%@FFLAGS@%$FFLAGS%g -s%@DEFS@%$DEFS%g -s%@LDFLAGS@%$LDFLAGS%g -s%@LIBS@%$LIBS%g -s%@exec_prefix@%$exec_prefix%g -s%@prefix@%$prefix%g -s%@program_transform_name@%$program_transform_name%g -s%@bindir@%$bindir%g -s%@sbindir@%$sbindir%g -s%@libexecdir@%$libexecdir%g -s%@datadir@%$datadir%g -s%@sysconfdir@%$sysconfdir%g -s%@sharedstatedir@%$sharedstatedir%g -s%@localstatedir@%$localstatedir%g -s%@libdir@%$libdir%g -s%@includedir@%$includedir%g -s%@oldincludedir@%$oldincludedir%g -s%@infodir@%$infodir%g -s%@mandir@%$mandir%g -s%@CONFIGDIR@%$CONFIGDIR%g -s%@PACKAGE@%$PACKAGE%g -s%@VERSION@%$VERSION%g -s%@SSL_DIR@%$SSL_DIR%g -s%@SSL_LIB_DIR@%$SSL_LIB_DIR%g -s%@SSL_INCLUDE_DIR@%$SSL_INCLUDE_DIR%g -s%@CC@%$CC%g -s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g -s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g -s%@INSTALL_DATA@%$INSTALL_DATA%g -s%@SET_MAKE@%$SET_MAKE%g -s%@RANLIB@%$RANLIB%g -s%@OBJEXT@%$OBJEXT%g -s%@EXEEXT@%$EXEEXT%g -s%@CYGPATH@%$CYGPATH%g -s%@RELPATH@%$RELPATH%g -s%@SSL_INCLUDE_DIR_NATIVE@%$SSL_INCLUDE_DIR_NATIVE%g -s%@TCL_DBGX@%$TCL_DBGX%g -s%@TCL_BIN_DIR@%$TCL_BIN_DIR%g -s%@TCL_SRC_DIR@%$TCL_SRC_DIR%g -s%@TCL_LIB_FILE@%$TCL_LIB_FILE%g -s%@TCL_LIBS@%$TCL_LIBS%g -s%@TCL_DEFS@%$TCL_DEFS%g -s%@TCL_SHLIB_LD_LIBS@%$TCL_SHLIB_LD_LIBS%g -s%@TCL_EXTRA_CFLAGS@%$TCL_EXTRA_CFLAGS%g -s%@TCL_LD_FLAGS@%$TCL_LD_FLAGS%g -s%@TCL_STUB_LIB_FILE@%$TCL_STUB_LIB_FILE%g -s%@TCL_LIB_SPEC@%$TCL_LIB_SPEC%g -s%@TCL_BUILD_LIB_SPEC@%$TCL_BUILD_LIB_SPEC%g -s%@TCL_STUB_LIB_SPEC@%$TCL_STUB_LIB_SPEC%g -s%@TCL_BUILD_STUB_LIB_SPEC@%$TCL_BUILD_STUB_LIB_SPEC%g -s%@TCL_INCLUDES@%$TCL_INCLUDES%g -s%@CLEANFILES@%$CLEANFILES%g -s%@CFLAGS_DEBUG@%$CFLAGS_DEBUG%g -s%@CFLAGS_OPTIMIZE@%$CFLAGS_OPTIMIZE%g -s%@STLIB_LD@%$STLIB_LD%g -s%@SHLIB_LD@%$SHLIB_LD%g -s%@SHLIB_CFLAGS@%$SHLIB_CFLAGS%g -s%@SHLIB_LDFLAGS@%$SHLIB_LDFLAGS%g -s%@CFLAGS_DEFAULT@%$CFLAGS_DEFAULT%g -s%@LDFLAGS_DEFAULT@%$LDFLAGS_DEFAULT%g -s%@MAKE_LIB@%$MAKE_LIB%g -s%@MAKE_SHARED_LIB@%$MAKE_SHARED_LIB%g -s%@MAKE_STATIC_LIB@%$MAKE_STATIC_LIB%g -s%@tls_LIB_FILE@%$tls_LIB_FILE%g -s%@SHLIB_LD_LIBS@%$SHLIB_LD_LIBS%g -s%@TCLSH_PROG@%$TCLSH_PROG%g - -CEOF -EOF - -cat >> $CONFIG_STATUS <<\EOF - -# Split the substitutions into bite-sized pieces for seds with -# small command number limits, like on Digital OSF/1 and HP-UX. -ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script. -ac_file=1 # Number of current file. -ac_beg=1 # First line for current file. -ac_end=$ac_max_sed_cmds # Line after last line for current file. -ac_more_lines=: -ac_sed_cmds="" -while $ac_more_lines; do - if test $ac_beg -gt 1; then - sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file - else - sed "${ac_end}q" conftest.subs > conftest.s$ac_file - fi - if test ! -s conftest.s$ac_file; then - ac_more_lines=false - rm -f conftest.s$ac_file - else - if test -z "$ac_sed_cmds"; then - ac_sed_cmds="sed -f conftest.s$ac_file" - else - ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file" - fi - ac_file=`expr $ac_file + 1` - ac_beg=$ac_end - ac_end=`expr $ac_end + $ac_max_sed_cmds` - fi -done -if test -z "$ac_sed_cmds"; then - ac_sed_cmds=cat -fi -EOF - -cat >> $CONFIG_STATUS <> $CONFIG_STATUS <<\EOF -for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then - # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". - case "$ac_file" in - *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'` - ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; - *) ac_file_in="${ac_file}.in" ;; - esac - - # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories. - - # Remove last slash and all that follows it. Not all systems have dirname. - ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'` - if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then - # The file is in a subdirectory. - test ! -d "$ac_dir" && mkdir "$ac_dir" - ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`" - # A "../" for each directory in $ac_dir_suffix. - ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'` - else - ac_dir_suffix= ac_dots= - fi - - case "$ac_given_srcdir" in - .) srcdir=. - if test -z "$ac_dots"; then top_srcdir=. - else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;; - /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;; - *) # Relative path. - srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix" - top_srcdir="$ac_dots$ac_given_srcdir" ;; - esac - - case "$ac_given_INSTALL" in - [/$]*) INSTALL="$ac_given_INSTALL" ;; - *) INSTALL="$ac_dots$ac_given_INSTALL" ;; - esac - - echo creating "$ac_file" - rm -f "$ac_file" - configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure." - case "$ac_file" in - *Makefile*) ac_comsub="1i\\ -# $configure_input" ;; - *) ac_comsub= ;; - esac - - ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"` - sed -e "$ac_comsub -s%@configure_input@%$configure_input%g -s%@srcdir@%$srcdir%g -s%@top_srcdir@%$top_srcdir%g -s%@INSTALL@%$INSTALL%g -" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file -fi; done -rm -f conftest.s* - -EOF -cat >> $CONFIG_STATUS <> $CONFIG_STATUS <<\EOF - -exit 0 -EOF -chmod +x $CONFIG_STATUS -rm -fr confdefs* $ac_clean_files -test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1 +# +# If the first sed substitution is executed (which looks for macros that +# take arguments), then we branch to the quote section. Otherwise, +# look for a macro that doesn't take arguments. +cat >confdef2opt.sed <<\_ACEOF +t clear +: clear +s,^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\),-D\1=\2,g +t quote +s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\),-D\1=\2,g +t quote +d +: quote +s,[ `~#$^&*(){}\\|;'"<>?],\\&,g +s,\[,\\&,g +s,\],\\&,g +s,\$,$$,g +p +_ACEOF +# We use echo to avoid assuming a particular line-breaking character. +# The extra dot is to prevent the shell from consuming trailing +# line-breaks from the sub-command output. A line-break within +# single-quotes doesn't work because, if this script is created in a +# platform that uses two characters for line-breaks (e.g., DOS), tr +# would break. +ac_LF_and_DOT=`echo; echo .` +DEFS=`sed -n -f confdef2opt.sed confdefs.h | tr "$ac_LF_and_DOT" ' .'` +rm -f confdef2opt.sed + + +ac_libobjs= +ac_ltlibobjs= +for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue + # 1. Remove the extension, and $U if already installed. + ac_i=`echo "$ac_i" | + sed 's/\$U\././;s/\.o$//;s/\.obj$//'` + # 2. Add them. + ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext" + ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo' +done +LIBOBJS=$ac_libobjs + +LTLIBOBJS=$ac_ltlibobjs + + + +: ${CONFIG_STATUS=./config.status} +ac_clean_files_save=$ac_clean_files +ac_clean_files="$ac_clean_files $CONFIG_STATUS" +{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5 +echo "$as_me: creating $CONFIG_STATUS" >&6;} +cat >$CONFIG_STATUS <<_ACEOF +#! $SHELL +# Generated by $as_me. +# Run this file to recreate the current configuration. +# Compiler output produced by configure, useful for debugging +# configure, is in config.log if it exists. + +debug=false +ac_cs_recheck=false +ac_cs_silent=false +SHELL=\${CONFIG_SHELL-$SHELL} +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF +## --------------------- ## +## M4sh Initialization. ## +## --------------------- ## + +# Be Bourne compatible +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' +elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then + set -o posix +fi + +# Support unset when possible. +if (FOO=FOO; unset FOO) >/dev/null 2>&1; then + as_unset=unset +else + as_unset=false +fi + + +# Work around bugs in pre-3.0 UWIN ksh. +$as_unset ENV MAIL MAILPATH +PS1='$ ' +PS2='> ' +PS4='+ ' + +# NLS nuisances. +for as_var in \ + LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ + LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ + LC_TELEPHONE LC_TIME +do + if (set +x; test -n "`(eval $as_var=C; export $as_var) 2>&1`"); then + eval $as_var=C; export $as_var + else + $as_unset $as_var + fi +done + +# Required to use basename. +if expr a : '\(a\)' >/dev/null 2>&1; then + as_expr=expr +else + as_expr=false +fi + +if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false +fi + + +# Name of the executable. +as_me=`$as_basename "$0" || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)$' \| \ + . : '\(.\)' 2>/dev/null || +echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } + /^X\/\(\/\/\)$/{ s//\1/; q; } + /^X\/\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + + +# PATH needs CR, and LINENO needs CR and PATH. +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + echo "#! /bin/sh" >conf$$.sh + echo "exit 0" >>conf$$.sh + chmod +x conf$$.sh + if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then + PATH_SEPARATOR=';' + else + PATH_SEPARATOR=: + fi + rm -f conf$$.sh +fi + + + as_lineno_1=$LINENO + as_lineno_2=$LINENO + as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x$as_lineno_3" = "x$as_lineno_2" || { + # Find who we are. Look in the path if we contain no path at all + # relative or not. + case $0 in + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break +done + + ;; + esac + # We did not find ourselves, most probably we were run as `sh COMMAND' + # in which case we are not to be found in the path. + if test "x$as_myself" = x; then + as_myself=$0 + fi + if test ! -f "$as_myself"; then + { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5 +echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;} + { (exit 1); exit 1; }; } + fi + case $CONFIG_SHELL in + '') + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for as_base in sh bash ksh sh5; do + case $as_dir in + /*) + if ("$as_dir/$as_base" -c ' + as_lineno_1=$LINENO + as_lineno_2=$LINENO + as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then + $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } + $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } + CONFIG_SHELL=$as_dir/$as_base + export CONFIG_SHELL + exec "$CONFIG_SHELL" "$0" ${1+"$@"} + fi;; + esac + done +done +;; + esac + + # Create $as_me.lineno as a copy of $as_myself, but with $LINENO + # uniformly replaced by the line number. The first 'sed' inserts a + # line-number line before each line; the second 'sed' does the real + # work. The second script uses 'N' to pair each line-number line + # with the numbered line, and appends trailing '-' during + # substitution so that $LINENO is not a special case at line end. + # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the + # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) + sed '=' <$as_myself | + sed ' + N + s,$,-, + : loop + s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3, + t loop + s,-$,, + s,^['$as_cr_digits']*\n,, + ' >$as_me.lineno && + chmod +x $as_me.lineno || + { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5 +echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;} + { (exit 1); exit 1; }; } + + # Don't try to exec as it changes $[0], causing all sort of problems + # (the dirname of $[0] is not the place where we might find the + # original and so on. Autoconf is especially sensible to this). + . ./$as_me.lineno + # Exit status is that of the last command. + exit +} + + +case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in + *c*,-n*) ECHO_N= ECHO_C=' +' ECHO_T=' ' ;; + *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; + *) ECHO_N= ECHO_C='\c' ECHO_T= ;; +esac + +if expr a : '\(a\)' >/dev/null 2>&1; then + as_expr=expr +else + as_expr=false +fi + +rm -f conf$$ conf$$.exe conf$$.file +echo >conf$$.file +if ln -s conf$$.file conf$$ 2>/dev/null; then + # We could just check for DJGPP; but this test a) works b) is more generic + # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). + if test -f conf$$.exe; then + # Don't use ln at all; we don't have any links + as_ln_s='cp -p' + else + as_ln_s='ln -s' + fi +elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln +else + as_ln_s='cp -p' +fi +rm -f conf$$ conf$$.exe conf$$.file + +if mkdir -p . 2>/dev/null; then + as_mkdir_p=: +else + as_mkdir_p=false +fi + +as_executable_p="test -f" + +# Sed expression to map a string onto a valid CPP name. +as_tr_cpp="sed y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g" + +# Sed expression to map a string onto a valid variable name. +as_tr_sh="sed y%*+%pp%;s%[^_$as_cr_alnum]%_%g" + + +# IFS +# We need space, tab and new line, in precisely that order. +as_nl=' +' +IFS=" $as_nl" + +# CDPATH. +$as_unset CDPATH + +exec 6>&1 + +# Open the log real soon, to keep \$[0] and so on meaningful, and to +# report actual input values of CONFIG_FILES etc. instead of their +# values after options handling. Logging --version etc. is OK. +exec 5>>config.log +{ + echo + sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX +## Running $as_me. ## +_ASBOX +} >&5 +cat >&5 <<_CSEOF + +This file was extended by tls $as_me 1.5.0, which was +generated by GNU Autoconf 2.57. Invocation command line was + + CONFIG_FILES = $CONFIG_FILES + CONFIG_HEADERS = $CONFIG_HEADERS + CONFIG_LINKS = $CONFIG_LINKS + CONFIG_COMMANDS = $CONFIG_COMMANDS + $ $0 $@ + +_CSEOF +echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5 +echo >&5 +_ACEOF + +# Files that config.status was made for. +if test -n "$ac_config_files"; then + echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS +fi + +if test -n "$ac_config_headers"; then + echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS +fi + +if test -n "$ac_config_links"; then + echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS +fi + +if test -n "$ac_config_commands"; then + echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS +fi + +cat >>$CONFIG_STATUS <<\_ACEOF + +ac_cs_usage="\ +\`$as_me' instantiates files from templates according to the +current configuration. + +Usage: $0 [OPTIONS] [FILE]... + + -h, --help print this help, then exit + -V, --version print version number, then exit + -q, --quiet do not print progress messages + -d, --debug don't remove temporary files + --recheck update $as_me by reconfiguring in the same conditions + --file=FILE[:TEMPLATE] + instantiate the configuration file FILE + +Configuration files: +$config_files + +Report bugs to ." +_ACEOF + +cat >>$CONFIG_STATUS <<_ACEOF +ac_cs_version="\\ +tls config.status 1.5.0 +configured by $0, generated by GNU Autoconf 2.57, + with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\" + +Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001 +Free Software Foundation, Inc. +This config.status script is free software; the Free Software Foundation +gives unlimited permission to copy, distribute and modify it." +srcdir=$srcdir +INSTALL="$INSTALL" +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF +# If no file are specified by the user, then we need to provide default +# value. By we need to know if files were specified by the user. +ac_need_defaults=: +while test $# != 0 +do + case $1 in + --*=*) + ac_option=`expr "x$1" : 'x\([^=]*\)='` + ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'` + ac_shift=: + ;; + -*) + ac_option=$1 + ac_optarg=$2 + ac_shift=shift + ;; + *) # This is not an option, so the user has probably given explicit + # arguments. + ac_option=$1 + ac_need_defaults=false;; + esac + + case $ac_option in + # Handling of the options. +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF + -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) + ac_cs_recheck=: ;; + --version | --vers* | -V ) + echo "$ac_cs_version"; exit 0 ;; + --he | --h) + # Conflict between --help and --header + { { echo "$as_me:$LINENO: error: ambiguous option: $1 +Try \`$0 --help' for more information." >&5 +echo "$as_me: error: ambiguous option: $1 +Try \`$0 --help' for more information." >&2;} + { (exit 1); exit 1; }; };; + --help | --hel | -h ) + echo "$ac_cs_usage"; exit 0 ;; + --debug | --d* | -d ) + debug=: ;; + --file | --fil | --fi | --f ) + $ac_shift + CONFIG_FILES="$CONFIG_FILES $ac_optarg" + ac_need_defaults=false;; + --header | --heade | --head | --hea ) + $ac_shift + CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg" + ac_need_defaults=false;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil | --si | --s) + ac_cs_silent=: ;; + + # This is an error. + -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1 +Try \`$0 --help' for more information." >&5 +echo "$as_me: error: unrecognized option: $1 +Try \`$0 --help' for more information." >&2;} + { (exit 1); exit 1; }; } ;; + + *) ac_config_targets="$ac_config_targets $1" ;; + + esac + shift +done + +ac_configure_extra_args= + +if $ac_cs_silent; then + exec 6>/dev/null + ac_configure_extra_args="$ac_configure_extra_args --silent" +fi + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF +if \$ac_cs_recheck; then + echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6 + exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion +fi + +_ACEOF + + + + + +cat >>$CONFIG_STATUS <<\_ACEOF +for ac_config_target in $ac_config_targets +do + case "$ac_config_target" in + # Handling of arguments. + "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;; + *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 +echo "$as_me: error: invalid argument: $ac_config_target" >&2;} + { (exit 1); exit 1; }; };; + esac +done + +# If the user did not use the arguments to specify the items to instantiate, +# then the envvar interface is used. Set only those that are not. +# We use the long form for the default assignment because of an extremely +# bizarre bug on SunOS 4.1.3. +if $ac_need_defaults; then + test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files +fi + +# Have a temporary directory for convenience. Make it in the build tree +# simply because there is no reason to put it here, and in addition, +# creating and moving files from /tmp can sometimes cause problems. +# Create a temporary directory, and hook for its removal unless debugging. +$debug || +{ + trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0 + trap '{ (exit 1); exit 1; }' 1 2 13 15 +} + +# Create a (secure) tmp directory for tmp files. + +{ + tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` && + test -n "$tmp" && test -d "$tmp" +} || +{ + tmp=./confstat$$-$RANDOM + (umask 077 && mkdir $tmp) +} || +{ + echo "$me: cannot create a temporary directory in ." >&2 + { (exit 1); exit 1; } +} + +_ACEOF + +cat >>$CONFIG_STATUS <<_ACEOF + +# +# CONFIG_FILES section. +# + +# No need to generate the scripts if there are no CONFIG_FILES. +# This happens for instance when ./config.status config.h +if test -n "\$CONFIG_FILES"; then + # Protect against being on the right side of a sed subst in config.status. + sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g; + s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF +s,@SHELL@,$SHELL,;t t +s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t +s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t +s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t +s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t +s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t +s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t +s,@exec_prefix@,$exec_prefix,;t t +s,@prefix@,$prefix,;t t +s,@program_transform_name@,$program_transform_name,;t t +s,@bindir@,$bindir,;t t +s,@sbindir@,$sbindir,;t t +s,@libexecdir@,$libexecdir,;t t +s,@datadir@,$datadir,;t t +s,@sysconfdir@,$sysconfdir,;t t +s,@sharedstatedir@,$sharedstatedir,;t t +s,@localstatedir@,$localstatedir,;t t +s,@libdir@,$libdir,;t t +s,@includedir@,$includedir,;t t +s,@oldincludedir@,$oldincludedir,;t t +s,@infodir@,$infodir,;t t +s,@mandir@,$mandir,;t t +s,@build_alias@,$build_alias,;t t +s,@host_alias@,$host_alias,;t t +s,@target_alias@,$target_alias,;t t +s,@DEFS@,$DEFS,;t t +s,@ECHO_C@,$ECHO_C,;t t +s,@ECHO_N@,$ECHO_N,;t t +s,@ECHO_T@,$ECHO_T,;t t +s,@LIBS@,$LIBS,;t t +s,@CYGPATH@,$CYGPATH,;t t +s,@EXEEXT@,$EXEEXT,;t t +s,@PKG_LIB_FILE@,$PKG_LIB_FILE,;t t +s,@PKG_STUB_LIB_FILE@,$PKG_STUB_LIB_FILE,;t t +s,@PKG_STUB_SOURCES@,$PKG_STUB_SOURCES,;t t +s,@PKG_STUB_OBJECTS@,$PKG_STUB_OBJECTS,;t t +s,@PKG_TCL_SOURCES@,$PKG_TCL_SOURCES,;t t +s,@PKG_HEADERS@,$PKG_HEADERS,;t t +s,@PKG_INCLUDES@,$PKG_INCLUDES,;t t +s,@PKG_LIBS@,$PKG_LIBS,;t t +s,@PKG_CFLAGS@,$PKG_CFLAGS,;t t +s,@TCL_VERSION@,$TCL_VERSION,;t t +s,@TCL_BIN_DIR@,$TCL_BIN_DIR,;t t +s,@TCL_SRC_DIR@,$TCL_SRC_DIR,;t t +s,@TCL_LIB_FILE@,$TCL_LIB_FILE,;t t +s,@TCL_LIB_FLAG@,$TCL_LIB_FLAG,;t t +s,@TCL_LIB_SPEC@,$TCL_LIB_SPEC,;t t +s,@TCL_STUB_LIB_FILE@,$TCL_STUB_LIB_FILE,;t t +s,@TCL_STUB_LIB_FLAG@,$TCL_STUB_LIB_FLAG,;t t +s,@TCL_STUB_LIB_SPEC@,$TCL_STUB_LIB_SPEC,;t t +s,@TCL_LIBS@,$TCL_LIBS,;t t +s,@TCL_DEFS@,$TCL_DEFS,;t t +s,@TCL_EXTRA_CFLAGS@,$TCL_EXTRA_CFLAGS,;t t +s,@TCL_LD_FLAGS@,$TCL_LD_FLAGS,;t t +s,@TCL_SHLIB_LD_LIBS@,$TCL_SHLIB_LD_LIBS,;t t +s,@CC@,$CC,;t t +s,@CFLAGS@,$CFLAGS,;t t +s,@LDFLAGS@,$LDFLAGS,;t t +s,@CPPFLAGS@,$CPPFLAGS,;t t +s,@ac_ct_CC@,$ac_ct_CC,;t t +s,@OBJEXT@,$OBJEXT,;t t +s,@CPP@,$CPP,;t t +s,@INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t +s,@INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t +s,@INSTALL_DATA@,$INSTALL_DATA,;t t +s,@SET_MAKE@,$SET_MAKE,;t t +s,@RANLIB@,$RANLIB,;t t +s,@ac_ct_RANLIB@,$ac_ct_RANLIB,;t t +s,@EGREP@,$EGREP,;t t +s,@MATH_LIBS@,$MATH_LIBS,;t t +s,@PKG_SOURCES@,$PKG_SOURCES,;t t +s,@PKG_OBJECTS@,$PKG_OBJECTS,;t t +s,@CLEANFILES@,$CLEANFILES,;t t +s,@TCL_INCLUDES@,$TCL_INCLUDES,;t t +s,@TCL_THREADS@,$TCL_THREADS,;t t +s,@SHARED_BUILD@,$SHARED_BUILD,;t t +s,@AR@,$AR,;t t +s,@LIBOBJS@,$LIBOBJS,;t t +s,@DL_LIBS@,$DL_LIBS,;t t +s,@CFLAGS_DEBUG@,$CFLAGS_DEBUG,;t t +s,@CFLAGS_OPTIMIZE@,$CFLAGS_OPTIMIZE,;t t +s,@CFLAGS_WARNING@,$CFLAGS_WARNING,;t t +s,@EXTRA_CFLAGS@,$EXTRA_CFLAGS,;t t +s,@STLIB_LD@,$STLIB_LD,;t t +s,@SHLIB_LD@,$SHLIB_LD,;t t +s,@SHLIB_CFLAGS@,$SHLIB_CFLAGS,;t t +s,@SHLIB_LD_FLAGS@,$SHLIB_LD_FLAGS,;t t +s,@SHLIB_LD_LIBS@,$SHLIB_LD_LIBS,;t t +s,@LDFLAGS_DEBUG@,$LDFLAGS_DEBUG,;t t +s,@LDFLAGS_OPTIMIZE@,$LDFLAGS_OPTIMIZE,;t t +s,@LD_LIBRARY_PATH_VAR@,$LD_LIBRARY_PATH_VAR,;t t +s,@TCL_DBGX@,$TCL_DBGX,;t t +s,@CFLAGS_DEFAULT@,$CFLAGS_DEFAULT,;t t +s,@LDFLAGS_DEFAULT@,$LDFLAGS_DEFAULT,;t t +s,@SSL_DIR@,$SSL_DIR,;t t +s,@SSL_LIB_DIR@,$SSL_LIB_DIR,;t t +s,@SSL_INCLUDE_DIR@,$SSL_INCLUDE_DIR,;t t +s,@SSL_INCLUDE_DIR_NATIVE@,$SSL_INCLUDE_DIR_NATIVE,;t t +s,@MAKE_LIB@,$MAKE_LIB,;t t +s,@MAKE_SHARED_LIB@,$MAKE_SHARED_LIB,;t t +s,@MAKE_STATIC_LIB@,$MAKE_STATIC_LIB,;t t +s,@MAKE_STUB_LIB@,$MAKE_STUB_LIB,;t t +s,@RANLIB_STUB@,$RANLIB_STUB,;t t +s,@TCLSH_PROG@,$TCLSH_PROG,;t t +s,@LTLIBOBJS@,$LTLIBOBJS,;t t +CEOF + +_ACEOF + + cat >>$CONFIG_STATUS <<\_ACEOF + # Split the substitutions into bite-sized pieces for seds with + # small command number limits, like on Digital OSF/1 and HP-UX. + ac_max_sed_lines=48 + ac_sed_frag=1 # Number of current file. + ac_beg=1 # First line for current file. + ac_end=$ac_max_sed_lines # Line after last line for current file. + ac_more_lines=: + ac_sed_cmds= + while $ac_more_lines; do + if test $ac_beg -gt 1; then + sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag + else + sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag + fi + if test ! -s $tmp/subs.frag; then + ac_more_lines=false + else + # The purpose of the label and of the branching condition is to + # speed up the sed processing (if there are no `@' at all, there + # is no need to browse any of the substitutions). + # These are the two extra sed commands mentioned above. + (echo ':t + /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed + if test -z "$ac_sed_cmds"; then + ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed" + else + ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed" + fi + ac_sed_frag=`expr $ac_sed_frag + 1` + ac_beg=$ac_end + ac_end=`expr $ac_end + $ac_max_sed_lines` + fi + done + if test -z "$ac_sed_cmds"; then + ac_sed_cmds=cat + fi +fi # test -n "$CONFIG_FILES" + +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF +for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue + # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". + case $ac_file in + - | *:- | *:-:* ) # input from stdin + cat >$tmp/stdin + ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` + ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; + *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` + ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; + * ) ac_file_in=$ac_file.in ;; + esac + + # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories. + ac_dir=`(dirname "$ac_file") 2>/dev/null || +$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$ac_file" : 'X\(//\)[^/]' \| \ + X"$ac_file" : 'X\(//\)$' \| \ + X"$ac_file" : 'X\(/\)' \| \ + . : '\(.\)' 2>/dev/null || +echo X"$ac_file" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } + /^X\(\/\/\)[^/].*/{ s//\1/; q; } + /^X\(\/\/\)$/{ s//\1/; q; } + /^X\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + { if $as_mkdir_p; then + mkdir -p "$ac_dir" + else + as_dir="$ac_dir" + as_dirs= + while test ! -d "$as_dir"; do + as_dirs="$as_dir $as_dirs" + as_dir=`(dirname "$as_dir") 2>/dev/null || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| \ + . : '\(.\)' 2>/dev/null || +echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } + /^X\(\/\/\)[^/].*/{ s//\1/; q; } + /^X\(\/\/\)$/{ s//\1/; q; } + /^X\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + done + test ! -n "$as_dirs" || mkdir $as_dirs + fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 +echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} + { (exit 1); exit 1; }; }; } + + ac_builddir=. + +if test "$ac_dir" != .; then + ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` + # A "../" for each directory in $ac_dir_suffix. + ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` +else + ac_dir_suffix= ac_top_builddir= +fi + +case $srcdir in + .) # No --srcdir option. We are building in place. + ac_srcdir=. + if test -z "$ac_top_builddir"; then + ac_top_srcdir=. + else + ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` + fi ;; + [\\/]* | ?:[\\/]* ) # Absolute path. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir ;; + *) # Relative path. + ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_builddir$srcdir ;; +esac +# Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be +# absolute. +ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd` +ac_abs_top_builddir=`cd "$ac_dir" && cd ${ac_top_builddir}. && pwd` +ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd` +ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd` + + + case $INSTALL in + [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; + *) ac_INSTALL=$ac_top_builddir$INSTALL ;; + esac + + if test x"$ac_file" != x-; then + { echo "$as_me:$LINENO: creating $ac_file" >&5 +echo "$as_me: creating $ac_file" >&6;} + rm -f "$ac_file" + fi + # Let's still pretend it is `configure' which instantiates (i.e., don't + # use $as_me), people would be surprised to read: + # /* config.h. Generated by config.status. */ + if test x"$ac_file" = x-; then + configure_input= + else + configure_input="$ac_file. " + fi + configure_input=$configure_input"Generated from `echo $ac_file_in | + sed 's,.*/,,'` by configure." + + # First look for the input files in the build tree, otherwise in the + # src tree. + ac_file_inputs=`IFS=: + for f in $ac_file_in; do + case $f in + -) echo $tmp/stdin ;; + [\\/$]*) + # Absolute (can't be DOS-style, as IFS=:) + test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 +echo "$as_me: error: cannot find input file: $f" >&2;} + { (exit 1); exit 1; }; } + echo $f;; + *) # Relative + if test -f "$f"; then + # Build tree + echo $f + elif test -f "$srcdir/$f"; then + # Source tree + echo $srcdir/$f + else + # /dev/null tree + { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 +echo "$as_me: error: cannot find input file: $f" >&2;} + { (exit 1); exit 1; }; } + fi;; + esac + done` || { (exit 1); exit 1; } +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF + sed "$ac_vpsub +$extrasub +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF +:t +/@[a-zA-Z_][a-zA-Z_0-9]*@/!b +s,@configure_input@,$configure_input,;t t +s,@srcdir@,$ac_srcdir,;t t +s,@abs_srcdir@,$ac_abs_srcdir,;t t +s,@top_srcdir@,$ac_top_srcdir,;t t +s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t +s,@builddir@,$ac_builddir,;t t +s,@abs_builddir@,$ac_abs_builddir,;t t +s,@top_builddir@,$ac_top_builddir,;t t +s,@abs_top_builddir@,$ac_abs_top_builddir,;t t +s,@INSTALL@,$ac_INSTALL,;t t +" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out + rm -f $tmp/stdin + if test x"$ac_file" != x-; then + mv $tmp/out $ac_file + else + cat $tmp/out + rm -f $tmp/out + fi + +done +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF + +{ (exit 0); exit 0; } +_ACEOF +chmod +x $CONFIG_STATUS +ac_clean_files=$ac_clean_files_save + + +# configure is writing to config.log, and then calls config.status. +# config.status does its own redirection, appending to config.log. +# Unfortunately, on DOS this fails, as config.log is still kept open +# by configure, so config.status won't be able to write to it; its +# output is simply discarded. So we exec the FD to /dev/null, +# effectively closing config.log, so it can be properly (re)opened and +# appended to by config.status. When coming back to configure, we +# need to make the FD available again. +if test "$no_create" != yes; then + ac_cs_success=: + ac_config_status_args= + test "$silent" = yes && + ac_config_status_args="$ac_config_status_args --quiet" + exec 5>/dev/null + $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false + exec 5>>config.log + # Use ||, not &&, to avoid exiting from the if with $? = 1, which + # would make configure fail if this is the last instruction. + $ac_cs_success || { (exit 1); exit 1; } +fi Index: configure.in ================================================================== --- configure.in +++ configure.in @@ -1,416 +1,203 @@ - -dnl "configure.in" for the "tls" Tcl extension. -dnl -dnl This file is an input file used by the GNU "autoconf" program to -dnl generate the file "configure", which is run during Tcl -dnl installation to configure the system for the local environment. +#!/bin/bash -norc +dnl This file is an input file used by the GNU "autoconf" program to +dnl generate the file "configure", which is run during Tcl installation +dnl to configure the system for the local environment. dnl dnl This file contains code to generate "tls" using either the dnl OpenSSL libraries or libraries from the commercial BSAFE SSL-C dnl product from RSA Security. In the United States, it is necessary dnl to use the RSA BSAFE libraries for any product developed for dnl commercial use. Licensing information for BSAFE SSL-C may be dnl obtained from RSA Data Scurity Inc., San Mateo, California, USA. dnl Their home page on the web is "www.rsasecurity.com". +# +# RCS: @(#) $Id: configure.in,v 1.18 2004/03/19 21:05:16 hobbs Exp $ #-------------------------------------------------------------------- # macro used to verify that the configure script can find the sources #-------------------------------------------------------------------- -AC_INIT(tls.h) - -AC_CONFIG_AUX_DIR(config) -CONFIGDIR=${srcdir}/config -AC_SUBST(CONFIGDIR) - -#-------------------------------------------------------------------- -# Set package name and version numbers here. The NODOT_VERSION is -# required for constructing the library name on systems that don't -# like dots in # library names (Windows). The VERSION variable is -# used on the other systems. -#-------------------------------------------------------------------- - -PACKAGE=tls - -MAJOR_VERSION=1 -MINOR_VERSION=5 -PATCHLEVEL=0 - -VERSION=${MAJOR_VERSION}.${MINOR_VERSION}${PATCHLEVEL} -NODOT_VERSION=${MAJOR_VERSION}${MINOR_VERSION} - -AC_SUBST(PACKAGE) -AC_SUBST(VERSION) - - -#-------------------------------------------------------------------- -# We put this here so that you can compile with -DVERSION="1.2" to -# encode the package version directly into the source files. -#-------------------------------------------------------------------- - -eval AC_DEFINE_UNQUOTED(VERSION, "${VERSION}") -eval AC_DEFINE_UNQUOTED(PACKAGE, "${PACKAGE}") +AC_INIT([tls], [1.5.0]) + +TEA_INIT([3.0]) + +AC_CONFIG_AUX_DIR(tclconfig) + +#-------------------------------------------------------------------- +# Load the tclConfig.sh file +#-------------------------------------------------------------------- + +TEA_PATH_TCLCONFIG +TEA_LOAD_TCLCONFIG + +#----------------------------------------------------------------------- +# Handle the --prefix=... option by defaulting to what Tcl gave. +# Must be called after TEA_LOAD_TCLCONFIG and before TEA_SETUP_COMPILER. +#----------------------------------------------------------------------- + +TEA_PREFIX + +#----------------------------------------------------------------------- +# Standard compiler checks. +# This sets up CC by using the CC env var, or looks for gcc otherwise. +# This also calls AC_PROG_CC, AC_PROG_INSTALL and a few others to create +# the basic setup necessary to compile executables. +#----------------------------------------------------------------------- + +TEA_SETUP_COMPILER + +#----------------------------------------------------------------------- +# __CHANGE__ +# Specify the C source files to compile in TEA_ADD_SOURCES, +# public headers that need to be installed in TEA_ADD_HEADERS, +# stub library C source files to compile in TEA_ADD_STUB_SOURCES, +# and runtime Tcl library files in TEA_ADD_TCL_SOURCES. +# This defines PKG(_STUB)_SOURCES, PKG(_STUB)_OBJECTS, PKG_HEADERS +# and PKG_TCL_SOURCES. +#----------------------------------------------------------------------- + +TEA_ADD_SOURCES([]) +TEA_ADD_HEADERS([]) +TEA_ADD_INCLUDES([]) +TEA_ADD_LIBS([]) +TEA_ADD_CFLAGS([]) +TEA_ADD_STUB_SOURCES([]) +TEA_ADD_TCL_SOURCES([]) + +#-------------------------------------------------------------------- +# A few miscellaneous platform-specific items: +# +# Define a special symbol for Windows (BUILD_sample in this case) so +# that we create the export library with the dll. See sha1.h on how +# to use this. +# +# Windows creates a few extra files that need to be cleaned up. +# You can add more files to clean if your extension creates any extra +# files. +# +# Define any extra compiler flags in the PACKAGE_CFLAGS variable. +# These will be appended to the current set of compiler flags for +# your system. +#-------------------------------------------------------------------- + +if test "${TEA_PLATFORM}" = "windows" ; then + AC_DEFINE(BUILD_tls) + AC_DEFINE(WINDOWS) + CLEANFILES="pkgIndex.tcl *.lib *.dll *.exp *.ilk *.pdb vc*.pch" +else + CLEANFILES="pkgIndex.tcl" +fi +AC_SUBST(CLEANFILES) + +#-------------------------------------------------------------------- +# Choose which headers you need. Extension authors should try very +# hard to only rely on the Tcl public header files. Internal headers +# contain private data structures and are subject to change without +# notice. +# This MUST be called after TEA_LOAD_TCLCONFIG / TEA_LOAD_TKCONFIG +#-------------------------------------------------------------------- + +TEA_PUBLIC_TCL_HEADERS + +#-------------------------------------------------------------------- +# Check whether --enable-threads or --disable-threads was given. +#-------------------------------------------------------------------- + +TEA_ENABLE_THREADS + +#-------------------------------------------------------------------- +# The statement below defines a collection of symbols related to +# building as a shared library instead of a static library. +#-------------------------------------------------------------------- + +TEA_ENABLE_SHARED + +#-------------------------------------------------------------------- +# This macro figures out what flags to use with the compiler/linker +# when building shared/static debug/optimized objects. This information +# can be taken from the tclConfig.sh file, but this figures it all out. +#-------------------------------------------------------------------- + +TEA_CONFIG_CFLAGS + +#-------------------------------------------------------------------- +# Set the default compiler switches based on the --enable-symbols option. +#-------------------------------------------------------------------- + +TEA_ENABLE_SYMBOLS + +#-------------------------------------------------------------------- +# Everyone should be linking against the Tcl stub library. If you +# can't for some reason, remove this definition. If you aren't using +# stubs, you also need to modify the SHLIB_LD_LIBS setting below to +# link against the non-stubbed Tcl library. Add Tk too if necessary. +#-------------------------------------------------------------------- + +AC_DEFINE(USE_TCL_STUBS) #-------------------------------------------------------------------- # If the variable OPENSSL is set, we will build with the OpenSSL # libraries. If it is not set, then we will use RSA BSAFE SSL-C # libraries instead of the default OpenSSL libaries. #-------------------------------------------------------------------- OPENSSL="1" -AC_ARG_ENABLE(bsafe, [ --enable-bsafe Use RSA BSAFE SSL-C libs. Default is to use OpenSSL libs], OPENSSL="", OPENSSL="1") - -#-------------------------------------------------------------------- -# Establish the location of the root directory for OpenSSL. -# If we're not using OpenSSL, set the root for BSAFE SSL-C. -# If we're using BSAFE, define the BSAFE compiler flag. -# The "FLAT_INC" flag is used in the BSAFE ssl.h header file and -# doesn't seem to be referenced anywhere else. -#-------------------------------------------------------------------- - -if test -n "${OPENSSL}"; then - SSL_DIR='/usr/local/ssl' - AC_DEFINE(NO_IDEA) - AC_DEFINE(NO_RC5) -else - SSL_DIR='/use/local/sslc' - AC_DEFINE(BSAFE) - AC_DEFINE(FLAT_INC) -fi - -#-------------------------------------------------------------------- -# If we're using RSA BSAFE SSL-C, we need to establish what platform -# we're running on before we can figure out some paths. -# This step isn't necessary if we're using OpenSSL. -#-------------------------------------------------------------------- - - -if test -z "${OPENSSL}"; then - AC_MSG_CHECKING(host type) - case "`uname -s`" in - *win32* | *WIN32* | *CYGWIN_NT*|*CYGWIN_98*|*CYGWIN_95*) - PLATFORM=WIN32 - AC_DEFINE(WINDOWS) - ;; - *SunOS*) - PLATFORM=SOLARIS - ;; - HP-UX) - PLATFORM=HPUX - ;; - *) - PLATFORM=LINUX - ;; - esac - AC_MSG_RESULT(${PLATFORM}) -fi - -AC_ARG_WITH(ssl-dir, [ --with-ssl-dir=DIR SSL root directory], SSL_DIR=$withval) - -if test ! -d "${SSL_DIR}"; then - AC_ERROR(${SSL_DIR} is not a valid directory) -fi - -#-------------------------------------------------------------------- -# The OpenSSL and BSAFE SSL-C directory structures differ. -#-------------------------------------------------------------------- - -if test -n "${OPENSSL}"; then - SSL_LIB_DIR=${SSL_DIR}/lib - SSL_INCLUDE_DIR=${SSL_DIR}/include - if test ! -f "${SSL_INCLUDE_DIR}/openssl/opensslv.h"; then - AC_ERROR(bad ssl-dir: cannot find openssl/opensslv.h under ${SSL_INCLUDE_DIR}) - fi -else - SSL_LIB_DIR=${SSL_DIR}/${PLATFORM}/library/lib - SSL_INCLUDE_DIR=${SSL_DIR}/${PLATFORM}/library/include - if test ! -f "${SSL_INCLUDE_DIR}/crypto.h"; then - AC_ERROR(bad ssl-dir: cannot find crypto.h under ${SSL_INCLUDE_DIR}) - fi -fi - -AC_SUBST(SSL_DIR) -AC_SUBST(SSL_LIB_DIR) -AC_SUBST(SSL_INCLUDE_DIR) +TLS_CHECK_SSL #-------------------------------------------------------------------- # Determine if we should use the patented encryption code #-------------------------------------------------------------------- AC_ARG_ENABLE(patents, [ --enable-patents Use patented code. Default is enabled], PATENTS=${enableval}, PATENTS=yes) if test ${PATENTS} = no; then - AC_DEFINE("NO_PATENTS") -fi - -#-------------------------------------------------------------------- -# Check whether --enable-gcc or --disable-gcc was given. Do this -# before AC_CYGWIN is called so the compiler can be fully tested by -# built-in autoconf tools. This macro also calls AC_PROG_CC to set -# the compiler if --enable-gcc was not used. -#-------------------------------------------------------------------- - -SC_ENABLE_GCC -AC_PROG_INSTALL - -#-------------------------------------------------------------------- -# If OpenSSL was built with gcc then there may be some symbols that need -# resolving before we can load it into tclsh (__udivd3i on solaris. Let the -# user specify if we need to add libgcc to the link line to resolve these -# symbols. -# -# This doesn't seem to be necessary if the RSA BSAFE SSL-C libraries -# are used instead of OpenSSL. -#-------------------------------------------------------------------- - -if test -n "${OPENSSL}"; then - - AC_MSG_CHECKING(if libgcc is needed to resolve openssl symbols) - - AC_ARG_WITH(gcclib, [ --with-gcclib link with libgcc to resolve symbols in a gcc-built openssl library], GCCLIB="-lgcc", GCCLIB="") - - if test "x${GCCLIB}" = "x" ; then - AC_MSG_RESULT(no) - else - AC_MSG_RESULT(yes) - AC_MSG_CHECKING(for gcc library location) - GCCPATH=`${CC} -print-libgcc-file-name | sed -e 's#[^/]*$##'` - GCCPATH="-L${GCCPATH}" - AC_MSG_RESULT(${GCCPATH}) - fi -fi - -#-------------------------------------------------------------------- -# Checks to see if the make program sets the $MAKE variable. -#-------------------------------------------------------------------- - -AC_PROG_MAKE_SET - -#-------------------------------------------------------------------- -# Find ranlib -#-------------------------------------------------------------------- - -AC_PROG_RANLIB - -#-------------------------------------------------------------------- -# This macro performs additional compiler tests. -#-------------------------------------------------------------------- - -AC_CYGWIN - -#-------------------------------------------------------------------- -# Determines the correct binary file extension (.o, .obj, .exe etc.) -#-------------------------------------------------------------------- - -AC_OBJEXT -AC_EXEEXT - -#-------------------------------------------------------------------- -# "cygpath" is used on windows to generate native path names for -# include files. These variables should only be used with the -# compiler and linker since # they generate native path names. -# -# Unix tclConfig.sh points SRC_DIR at the top-level directory of -# the Tcl sources, while the Windows tclConfig.sh points SRC_DIR at -# the win subdirectory. Hence the different usages of SRC_DIR below. -# -# This must be done before calling SC_PUBLIC_TCL_HEADERS or -# SC_PRIVATE_TCL_HEADERS. -#-------------------------------------------------------------------- - -case "`uname -s`" in - *win32* | *WIN32* | *CYGWIN_NT*|*CYGWIN_98*|*CYGWIN_95*) - CYGPATH="cygpath -w" - RELPATH=".. .. bin" - ;; - *) - CYGPATH=echo - RELPATH=".." - ;; -esac - -AC_SUBST(CYGPATH) -AC_SUBST(RELPATH) - -SSL_INCLUDE_DIR_NATIVE=\"`${CYGPATH} ${SSL_INCLUDE_DIR}`\" -AC_SUBST(SSL_INCLUDE_DIR_NATIVE) - - -#-------------------------------------------------------------------- -# Load the tclConfig.sh file -#-------------------------------------------------------------------- - -SC_PATH_TCLCONFIG -SC_LOAD_TCLCONFIG - -SC_PUBLIC_TCL_HEADERS - -#-------------------------------------------------------------------- -# A few miscellaneous platform-specific items: -# -# Define a special symbol for Windows (BUILD_tls in this case) so -# that we create the export library with the dll. -# -# Clean up any extra files that Windows creates. -# -# Define any extra compiler flags in the PACKAGE_CFLAGS variable. -# These will be appended to the current set of compiler flags for -# your system. -#-------------------------------------------------------------------- - -case "`uname -s`" in - *win32* | *WIN32* | *CYGWIN_NT*|*CYGWIN_98*|*CYGWIN_95*) - AC_DEFINE_UNQUOTED(BUILD_${PACKAGE}) - CLEANFILES="*.lib *.dll *.exp *.ilk *.pdb vc50.pch" - AC_SUBST(CLEANFILES) - ;; - *) - CLEANFILES= - ;; -esac - -#-------------------------------------------------------------------- -# Check whether --enable-threads or --disable-threads was given. -# So far only Tcl responds to this one. -#-------------------------------------------------------------------- - -SC_ENABLE_THREADS - -#-------------------------------------------------------------------- -# The statement below defines a collection of symbols related to -# building as a shared library instead of a static library. -#-------------------------------------------------------------------- - -SC_ENABLE_SHARED - -#-------------------------------------------------------------------- -# This macro figures out what flags to use with the compiler/linker -# when building shared/static debug/optimized objects. This information -# is all taken from the tclConfig.sh file. -#-------------------------------------------------------------------- - -CFLAGS_DEBUG=${TCL_CFLAGS_DEBUG} -CFLAGS_OPTIMIZE=${TCL_CFLAGS_OPTIMIZE} -LDFLAGS_DEBUG=${TCL_LDFLAGS_DEBUG} -LDFLAGS_OPTIMIZE=${TCL_LDFLAGS_OPTIMIZE} -SHLIB_LD=${TCL_SHLIB_LD} -STLIB_LD=${TCL_STLIB_LD} -SHLIB_CFLAGS=${TCL_SHLIB_CFLAGS} - -AC_SUBST(CFLAGS_DEBUG) -AC_SUBST(CFLAGS_OPTIMIZE) -AC_SUBST(STLIB_LD) -AC_SUBST(SHLIB_LD) -AC_SUBST(SHLIB_CFLAGS) -AC_SUBST(SHLIB_LDFLAGS) - -#-------------------------------------------------------------------- -# Set the default compiler switches based on the --enable-symbols -# option. -#-------------------------------------------------------------------- - -SC_ENABLE_SYMBOLS - -if test "${SHARED_BUILD}" = "1" ; then - CFLAGS='${CFLAGS_DEFAULT} ${CFLAGS_WARNING} ${SHLIB_CFLAGS}' -else - CFLAGS='${CFLAGS_DEFAULT} ${CFLAGS_WARNING}' -fi - -#-------------------------------------------------------------------- -# Everyone should be linking against the Tcl stub library. If you -# can't for some reason, remove this definition. If you aren't using -# stubs, you also need to modify the SHLIB_LD_LIBS setting below to -# link against the non-stubbed Tcl library. -#-------------------------------------------------------------------- - -AC_DEFINE(USE_TCL_STUBS) - -#-------------------------------------------------------------------- -# This macro generates a line to use when building a library. It -# depends on values set by the SC_ENABLE_SHARED, SC_ENABLE_SYMBOLS, -# and SC_LOAD_TCLCONFIG macros above. -#-------------------------------------------------------------------- - -SC_MAKE_LIB - -#-------------------------------------------------------------------- -# eval these two values to dereference the ${DBGX} variable. -#-------------------------------------------------------------------- - -eval "SHARED_LIB_SUFFIX=${TCL_SHARED_LIB_SUFFIX}" -eval "UNSHARED_LIB_SUFFIX=${TCL_UNSHARED_LIB_SUFFIX}" + AC_DEFINE([NO_PATENTS]) +fi + +#-------------------------------------------------------------------- +# This macro generates a line to use when building a library. It +# depends on values set by the TEA_ENABLE_SHARED, TEA_ENABLE_SYMBOLS, +# and TEA_LOAD_TCLCONFIG macros above. +#-------------------------------------------------------------------- + +TEA_MAKE_LIB #-------------------------------------------------------------------- # Shared libraries and static libraries have different names. # Also, windows libraries and unix libraries have different names. # For the OpenSSL version, I chose to use the same library names that # OpenSSL uses as its default names. #-------------------------------------------------------------------- if test -n "${OPENSSL}"; then - - case "`uname -s`" in - *win32* | *WIN32* | *CYGWIN_NT*|*CYGWIN_98*|*CYGWIN_95*) - if test "${SHARED_BUILD}" = "1" ; then - SHLIB_LD_LIBS="\"`${CYGPATH} ${TCL_BIN_DIR}/${TCL_STUB_LIB_FILE}`\" ${TCL_SHLIB_LD_LIBS} \"`${CYGPATH} ${SSL_LIB_DIR}/ssleay32.lib`\" \"`${CYGPATH} ${SSL_LIB_DIR}/libeay32.lib`\"" - eval "${PACKAGE}_LIB_FILE=${PACKAGE}${SHARED_LIB_SUFFIX}" - RANLIB=: - else - eval "${PACKAGE}_LIB_FILE=${PACKAGE}${UNSHARED_LIB_SUFFIX}" - fi - ;; - *) - if test "${SHARED_BUILD}" = "1" ; then - SHLIB_LD_LIBS="${TCL_STUB_LIB_SPEC} -L${SSL_LIB_DIR} -lssl -L${SSL_LIB_DIR} -lcrypto ${GCCPATH} ${GCCLIB}" - eval "${PACKAGE}_LIB_FILE=lib${PACKAGE}${SHARED_LIB_SUFFIX}" - RANLIB=: - else - eval "${PACKAGE}_LIB_FILE=lib${PACKAGE}${UNSHARED_LIB_SUFFIX}" - fi - ;; - esac -else - case "`uname -s`" in - *win32* | *WIN32* | *CYGWIN_NT*|*CYGWIN_98*|*CYGWIN_95*) - if test "${SHARED_BUILD}" = "1" ; then - SHLIB_LD_LIBS="\"`${CYGPATH} ${TCL_BIN_DIR}/${TCL_STUB_LIB_FILE}`\" ${TCL_SHLIB_LD_LIBS} \"`${CYGPATH} ${SSL_LIB_DIR}/sslc32.lib`\"" - eval "${PACKAGE}_LIB_FILE=${PACKAGE}${SHARED_LIB_SUFFIX}" - RANLIB=: - else - eval "${PACKAGE}_LIB_FILE=${PACKAGE}${UNSHARED_LIB_SUFFIX}" - fi - ;; - *) - if test "${SHARED_BUILD}" = "1" ; then - SHLIB_LD_LIBS="${TCL_STUB_LIB_SPEC} -L${SSL_LIB_DIR} -lsslc" - eval "${PACKAGE}_LIB_FILE=lib${PACKAGE}${SHARED_LIB_SUFFIX}" - RANLIB=: - else - eval "${PACKAGE}_LIB_FILE=lib${PACKAGE}${UNSHARED_LIB_SUFFIX}" - fi - ;; - esac -fi - -AC_SUBST(tls_LIB_FILE) -AC_SUBST(SHLIB_LD_LIBS) + if test "${TEA_PLATFORM}" = "windows" ; then + TEA_ADD_LIBS([-L\"`${CYGPATH} ${SSL_LIB_DIR}`\" -lssleay32.lib -llibeay32.lib]) + else + TEA_ADD_LIBS([-L${SSL_LIB_DIR} -lssl -lcrypto ${GCCPATH} ${GCCLIB}]) + fi +else + if test "${TEA_PLATFORM}" = "windows" ; then + TEA_ADD_LIBS([-L\"`${CYGPATH} ${SSL_LIB_DIR}`\" -lsslc32.lib]) + else + TEA_ADD_LIBS([-L${SSL_LIB_DIR} -lsslc]) + fi +fi #-------------------------------------------------------------------- # Find tclsh so that we can run pkg_mkIndex to generate the pkgIndex.tcl # file during the install process. Don't run the TCLSH_PROG through # ${CYGPATH} because it's being used directly by make. # Require that we use a tclsh shell version 8.2 or later since earlier # versions have bugs in the pkg_mkIndex routine. +# Add WISH as well if this is a Tk extension. #-------------------------------------------------------------------- -SC_PROG_TCLSH +TEA_PROG_TCLSH #-------------------------------------------------------------------- # Finally, substitute all of the various values into the Makefile. #-------------------------------------------------------------------- -AC_OUTPUT([Makefile \ - pkgIndex.tcl]) +AC_OUTPUT([Makefile]) DELETED pkgIndex.tcl.in Index: pkgIndex.tcl.in ================================================================== --- pkgIndex.tcl.in +++ /dev/null @@ -1,9 +0,0 @@ - -# pkgIndex.tcl - -# -# A new manually generated "pkgIndex.tcl" file for tls to -# replace the original which didn't include the commands from "tls.tcl". -# - -package ifneeded tls 1.5 "[list load [file join $dir @RELPATH@ @tls_LIB_FILE@] ] ; [list source [file join $dir tls.tcl] ]" - DELETED strncasecmp.c Index: strncasecmp.c ================================================================== --- strncasecmp.c +++ /dev/null @@ -1,142 +0,0 @@ -/* - * strncasecmp.c -- - * - * Source code for the "strncasecmp" library routine. - * - * Copyright (c) 1988-1993 The Regents of the University of California. - * Copyright (c) 1995-1996 Sun Microsystems, Inc. - * - * See the file "license.terms" for information on usage and redistribution - * of this file, and for a DISCLAIMER OF ALL WARRANTIES. - * - * SCCS: @(#) strncasecmp.c 1.7 96/10/24 15:23:36 - */ - -#include "tclPort.h" - -/* - * This array is designed for mapping upper and lower case letter - * together for a case independent comparison. The mappings are - * based upon ASCII character sequences. - */ - -static unsigned char charmap[] = { - 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, - 0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, - 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17, - 0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, 0x1e, 0x1f, - 0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26, 0x27, - 0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2d, 0x2e, 0x2f, - 0x30, 0x31, 0x32, 0x33, 0x34, 0x35, 0x36, 0x37, - 0x38, 0x39, 0x3a, 0x3b, 0x3c, 0x3d, 0x3e, 0x3f, - 0x40, 0x61, 0x62, 0x63, 0x64, 0x65, 0x66, 0x67, - 0x68, 0x69, 0x6a, 0x6b, 0x6c, 0x6d, 0x6e, 0x6f, - 0x70, 0x71, 0x72, 0x73, 0x74, 0x75, 0x76, 0x77, - 0x78, 0x79, 0x7a, 0x5b, 0x5c, 0x5d, 0x5e, 0x5f, - 0x60, 0x61, 0x62, 0x63, 0x64, 0x65, 0x66, 0x67, - 0x68, 0x69, 0x6a, 0x6b, 0x6c, 0x6d, 0x6e, 0x6f, - 0x70, 0x71, 0x72, 0x73, 0x74, 0x75, 0x76, 0x77, - 0x78, 0x79, 0x7a, 0x7b, 0x7c, 0x7d, 0x7e, 0x7f, - 0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, - 0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f, - 0x90, 0x91, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97, - 0x98, 0x99, 0x9a, 0x9b, 0x9c, 0x9d, 0x9e, 0x9f, - 0xa0, 0xa1, 0xa2, 0xa3, 0xa4, 0xa5, 0xa6, 0xa7, - 0xa8, 0xa9, 0xaa, 0xab, 0xac, 0xad, 0xae, 0xaf, - 0xb0, 0xb1, 0xb2, 0xb3, 0xb4, 0xb5, 0xb6, 0xb7, - 0xb8, 0xb9, 0xba, 0xbb, 0xbc, 0xbd, 0xbe, 0xbf, - 0xc0, 0xe1, 0xe2, 0xe3, 0xe4, 0xc5, 0xe6, 0xe7, - 0xe8, 0xe9, 0xea, 0xeb, 0xec, 0xed, 0xee, 0xef, - 0xf0, 0xf1, 0xf2, 0xf3, 0xf4, 0xf5, 0xf6, 0xf7, - 0xf8, 0xf9, 0xfa, 0xdb, 0xdc, 0xdd, 0xde, 0xdf, - 0xe0, 0xe1, 0xe2, 0xe3, 0xe4, 0xe5, 0xe6, 0xe7, - 0xe8, 0xe9, 0xea, 0xeb, 0xec, 0xed, 0xee, 0xef, - 0xf0, 0xf1, 0xf2, 0xf3, 0xf4, 0xf5, 0xf6, 0xf7, - 0xf8, 0xf9, 0xfa, 0xfb, 0xfc, 0xfd, 0xfe, 0xff, -}; - -/* - * Here are the prototypes just in case they are not included - * in tclPort.h. - */ -int strncasecmp _ANSI_ARGS_((CONST char *s1, - CONST char *s2, size_t n)); - -int strcasecmp _ANSI_ARGS_((CONST char *s1, - CONST char *s2)); - -/* - *---------------------------------------------------------------------- - * - * strcasecmp -- - * - * Compares two strings, ignoring case differences. - * - * Results: - * Compares two null-terminated strings s1 and s2, returning -1, 0, - * or 1 if s1 is lexicographically less than, equal to, or greater - * than s2. - * - * Side effects: - * None. - * - *---------------------------------------------------------------------- - */ - -int -strcasecmp(s1, s2) - CONST char *s1; /* First string. */ - CONST char *s2; /* Second string. */ -{ - unsigned char u1, u2; - - for ( ; ; s1++, s2++) { - u1 = (unsigned char) *s1; - u2 = (unsigned char) *s2; - if ((u1 == '\0') || (charmap[u1] != charmap[u2])) { - break; - } - } - return charmap[u1] - charmap[u2]; -} - -/* - *---------------------------------------------------------------------- - * - * strncasecmp -- - * - * Compares two strings, ignoring case differences. - * - * Results: - * Compares up to length chars of s1 and s2, returning -1, 0, or 1 - * if s1 is lexicographically less than, equal to, or greater - * than s2 over those characters. - * - * Side effects: - * None. - * - *---------------------------------------------------------------------- - */ - -int -strncasecmp(s1, s2, length) - CONST char *s1; /* First string. */ - CONST char *s2; /* Second string. */ - size_t length; /* Maximum number of characters to compare - * (stop earlier if the end of either string - * is reached). */ -{ - unsigned char u1, u2; - - for (; length != 0; length--, s1++, s2++) { - u1 = (unsigned char) *s1; - u2 = (unsigned char) *s2; - if (charmap[u1] != charmap[u2]) { - return charmap[u1] - charmap[u2]; - } - if (u1 == '\0') { - return 0; - } - } - return 0; -} Index: tls.c ================================================================== --- tls.c +++ tls.c @@ -3,11 +3,11 @@ * some modifications: * Copyright (C) 2000 Ajuba Solutions * Copyright (C) 2002 ActiveState Corporation * Copyright (C) 2004 Starfish Systems * - * $Header: /home/rkeene/tmp/cvs2fossil/../tcltls/tls/tls/tls.c,v 1.20 2004/02/13 02:09:21 razzell Exp $ + * $Header: /home/rkeene/tmp/cvs2fossil/../tcltls/tls/tls/tls.c,v 1.21 2004/03/19 21:05:16 hobbs Exp $ * * TLS (aka SSL) Channel - can be layered on any bi-directional * Tcl_Channel (Note: Requires Trf Core Patch) * * This was built (almost) from scratch based upon observation of @@ -1475,11 +1475,11 @@ (ClientData) 0, (Tcl_CmdDeleteProc *) NULL); Tcl_CreateObjCommand(interp, "tls::misc", MiscObjCmd, (ClientData) 0, (Tcl_CmdDeleteProc *) NULL); - return Tcl_PkgProvide(interp, PACKAGE, VERSION); + return Tcl_PkgProvide(interp, PACKAGE_NAME, PACKAGE_VERSION); } /* *------------------------------------------------------* *