Index: Makefile.in
==================================================================
--- Makefile.in
+++ Makefile.in
@@ -9,11 +9,11 @@
 # Copyright (c) 1999-2000 Scriptics Corporation.
 #
 # See the file "license.terms" for information on usage and redistribution
 # of this file, and for a DISCLAIMER OF ALL WARRANTIES.
 #
-# RCS: @(#) $Id: Makefile.in,v 1.4 2000/02/05 00:32:37 aborr Exp $
+# RCS: @(#) $Id: Makefile.in,v 1.5 2000/02/06 00:57:35 wart Exp $
 
 
 lib_BINARIES=$(tls_LIB_FILE)
 BINARIES=$(lib_BINARIES)
 
@@ -164,11 +164,12 @@
 EXTRA_CFLAGS = $(TCL_DEFS) $(PROTO_FLAGS) $(SECURITY_FLAGS) $(MEM_DEBUG_FLAGS) $(KEYSYM_FLAGS) $(NO_DEPRECATED_FLAGS) $(SSL_CFLAGS)
 
 DEFS = @DEFS@ $(EXTRA_CFLAGS)
 
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
+CONFIGDIR = @CONFIGDIR@
+mkinstalldirs = $(SHELL) $(CONFIGDIR)/mkinstalldirs
 CONFIG_CLEAN_FILES =
 
 CPPFLAGS = @CPPFLAGS@
 LIBS = @LIBS@
 AR = ar

Index: aclocal.m4
==================================================================
--- aclocal.m4
+++ aclocal.m4
@@ -1,1 +1,1 @@
-builtin(include,tcl.m4)
+builtin(include,config/tcl.m4)

Index: configure.in
==================================================================
--- configure.in
+++ configure.in
@@ -10,10 +10,13 @@
 # macro used to verify that the configure script can find the sources
 #--------------------------------------------------------------------
 
 AC_INIT(tls.h)
 
+AC_CONFIG_AUX_DIR(config)
+CONFIGDIR=${srcdir}/config
+AC_SUBST(CONFIGDIR)
 
 #--------------------------------------------------------------------
 # Set package name and version numbers here.  The NODOT_VERSION is
 # required for constructing the library name on systems that don't
 # like dots in # library names (Windows).  The VERSION variable is

DELETED install-sh
Index: install-sh
==================================================================
--- install-sh
+++ /dev/null
@@ -1,119 +0,0 @@
-#!/bin/sh
-
-#
-# install - install a program, script, or datafile
-# This comes from X11R5; it is not part of GNU.
-#
-# $XConsortium: install.sh,v 1.2 89/12/18 14:47:22 jim Exp $
-#
-# This script is compatible with the BSD install script, but was written
-# from scratch.
-#
-
-
-# set DOITPROG to echo to test this script
-
-# Don't use :- since 4.3BSD and earlier shells don't like it.
-doit="${DOITPROG-}"
-
-
-# put in absolute paths if you don't have them in your path; or use env. vars.
-
-mvprog="${MVPROG-mv}"
-cpprog="${CPPROG-cp}"
-chmodprog="${CHMODPROG-chmod}"
-chownprog="${CHOWNPROG-chown}"
-chgrpprog="${CHGRPPROG-chgrp}"
-stripprog="${STRIPPROG-strip}"
-rmprog="${RMPROG-rm}"
-
-instcmd="$mvprog"
-chmodcmd=""
-chowncmd=""
-chgrpcmd=""
-stripcmd=""
-rmcmd="$rmprog -f"
-mvcmd="$mvprog"
-src=""
-dst=""
-
-while [ x"$1" != x ]; do
-    case $1 in
-	-c) instcmd="$cpprog"
-	    shift
-	    continue;;
-
-	-m) chmodcmd="$chmodprog $2"
-	    shift
-	    shift
-	    continue;;
-
-	-o) chowncmd="$chownprog $2"
-	    shift
-	    shift
-	    continue;;
-
-	-g) chgrpcmd="$chgrpprog $2"
-	    shift
-	    shift
-	    continue;;
-
-	-s) stripcmd="$stripprog"
-	    shift
-	    continue;;
-
-	*)  if [ x"$src" = x ]
-	    then
-		src=$1
-	    else
-		dst=$1
-	    fi
-	    shift
-	    continue;;
-    esac
-done
-
-if [ x"$src" = x ]
-then
-	echo "install:  no input file specified"
-	exit 1
-fi
-
-if [ x"$dst" = x ]
-then
-	echo "install:  no destination specified"
-	exit 1
-fi
-
-
-# If destination is a directory, append the input filename; if your system
-# does not like double slashes in filenames, you may need to add some logic
-
-if [ -d $dst ]
-then
-	dst="$dst"/`basename $src`
-fi
-
-# Make a temp file name in the proper directory.
-
-dstdir=`dirname $dst`
-dsttmp=$dstdir/#inst.$$#
-
-# Move or copy the file name to the temp name
-
-$doit $instcmd $src $dsttmp
-
-# and set any options; do chmod last to preserve setuid bits
-
-if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; fi
-if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; fi
-if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; fi
-if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; fi
-
-# Now rename the file to the real destination.
-
-$doit $rmcmd $dst
-$doit $mvcmd $dsttmp $dst
-
-
-exit 0

DELETED mkinstalldirs
Index: mkinstalldirs
==================================================================
--- mkinstalldirs
+++ /dev/null
@@ -1,41 +0,0 @@
-#! /bin/sh
-# mkinstalldirs --- make directory hierarchy
-# Author: Noah Friedman <friedman@prep.ai.mit.edu>
-# Created: 1993-05-16
-# Public domain
-
-# $Id: mkinstalldirs,v 1.2 2000/01/20 02:01:17 aborr Exp $
-
-
-errstatus=0
-
-for file
-do
-   set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'`
-   shift
-
-   pathcomp=
-   for d
-   do
-     pathcomp="$pathcomp$d"
-     case "$pathcomp" in
-       -* ) pathcomp=./$pathcomp ;;
-     esac
-
-     if test ! -d "$pathcomp"; then
-        echo "mkdir $pathcomp"
-
-        mkdir "$pathcomp" || lasterr=$?
-
-        if test ! -d "$pathcomp"; then
-  	  errstatus=$lasterr
-        fi
-     fi
-
-     pathcomp="$pathcomp/"
-   done
-done
-
-exit $errstatus
-
-# mkinstalldirs ends here

DELETED tcl.m4
Index: tcl.m4
==================================================================
--- tcl.m4
+++ /dev/null
@@ -1,2270 +0,0 @@
-# tcl.m4 --
-#
-#	This file provides a set of autoconf macros to help TEA-enable
-#	a Tcl extension.
-#
-# Copyright (c) 1999 Scriptics Corporation.
-#
-# See the file "license.terms" for information on usage and redistribution
-# of this file, and for a DISCLAIMER OF ALL WARRANTIES.
-
-#------------------------------------------------------------------------
-# SC_PATH_TCLCONFIG --
-#
-#	Locate the tclConfig.sh file and perform a sanity check on
-#	the Tcl compile flags
-#
-# Arguments:
-#	none
-#
-# Results:
-#
-#	Adds the following arguments to configure:
-#		--with-tcl=...
-#
-#	Defines the following vars:
-#		TCL_BIN_DIR	Full path to the directory containing
-#				the tclConfig.sh file
-#------------------------------------------------------------------------
-
-AC_DEFUN(SC_PATH_TCLCONFIG, [
-    #
-    # Ok, lets find the tcl configuration
-    # First, look for one uninstalled.
-    # the alternative search directory is invoked by --with-tcl
-    #
-
-    if test x"${no_tcl}" = x ; then
-	# we reset no_tcl in case something fails here
-	no_tcl=true
-	AC_ARG_WITH(tcl, [  --with-tcl              directory containing tcl configuration (tclConfig.sh)], with_tclconfig=${withval})
-	AC_MSG_CHECKING([for Tcl configuration])
-	AC_CACHE_VAL(ac_cv_c_tclconfig,[
-
-	    # First check to see if --with-tcl was specified.
-	    if test x"${with_tclconfig}" != x ; then
-		if test -f "${with_tclconfig}/tclConfig.sh" ; then
-		    ac_cv_c_tclconfig=`(cd ${with_tclconfig}; pwd)`
-		else
-		    AC_MSG_ERROR([${with_tclconfig} directory doesn't contain tclConfig.sh])
-		fi
-	    fi
-
-	    # then check for a private Tcl installation
-	    if test x"${ac_cv_c_tclconfig}" = x ; then
-		for i in \
-			../tcl \
-			`ls -dr ../tcl[[8-9]].[[0-9]]* 2>/dev/null` \
-			../../tcl \
-			`ls -dr ../../tcl[[8-9]].[[0-9]]* 2>/dev/null` \
-			../../../tcl \
-			`ls -dr ../../../tcl[[8-9]].[[0-9]]* 2>/dev/null` ; do
-		    if test -f "$i/unix/tclConfig.sh" ; then
-			ac_cv_c_tclconfig=`(cd $i/unix; pwd)`
-			break
-		    fi
-		done
-	    fi
-
-	    # check in a few common install locations
-	    if test x"${ac_cv_c_tclconfig}" = x ; then
-		for i in `ls -d ${prefix}/lib 2>/dev/null` \
-			`ls -d /usr/local/lib 2>/dev/null` ; do
-		    if test -f "$i/tclConfig.sh" ; then
-			ac_cv_c_tclconfig=`(cd $i; pwd)`
-			break
-		    fi
-		done
-	    fi
-
-	    # check in a few other private locations
-	    if test x"${ac_cv_c_tclconfig}" = x ; then
-		for i in \
-			${srcdir}/../tcl \
-			`ls -dr ${srcdir}/../tcl[[8-9]].[[0-9]]* 2>/dev/null` ; do
-		    if test -f "$i/unix/tclConfig.sh" ; then
-		    ac_cv_c_tclconfig=`(cd $i/unix; pwd)`
-		    break
-		fi
-		done
-	    fi
-	])
-
-	if test x"${ac_cv_c_tclconfig}" = x ; then
-	    TCL_BIN_DIR="# no Tcl configs found"
-	    AC_MSG_WARN(Can't find Tcl configuration definitions)
-	    exit 0
-	else
-	    no_tcl=
-	    TCL_BIN_DIR=${ac_cv_c_tclconfig}
-	    AC_MSG_RESULT(found $TCL_BIN_DIR/tclConfig.sh)
-	fi
-    fi
-])
-
-#------------------------------------------------------------------------
-# SC_PATH_TKCONFIG --
-#
-#	Locate the tkConfig.sh file
-#
-# Arguments:
-#	none
-#
-# Results:
-#
-#	Adds the following arguments to configure:
-#		--with-tk=...
-#
-#	Defines the following vars:
-#		TK_BIN_DIR	Full path to the directory containing
-#				the tkConfig.sh file
-#------------------------------------------------------------------------
-
-AC_DEFUN(SC_PATH_TKCONFIG, [
-    #
-    # Ok, lets find the tk configuration
-    # First, look for one uninstalled.
-    # the alternative search directory is invoked by --with-tk
-    #
-
-    if test x"${no_tk}" = x ; then
-	# we reset no_tk in case something fails here
-	no_tk=true
-	AC_ARG_WITH(tk, [  --with-tk               directory containing tk configuration (tkConfig.sh)], with_tkconfig=${withval})
-	AC_MSG_CHECKING([for Tk configuration])
-	AC_CACHE_VAL(ac_cv_c_tkconfig,[
-
-	    # First check to see if --with-tkconfig was specified.
-	    if test x"${with_tkconfig}" != x ; then
-		if test -f "${with_tkconfig}/tkConfig.sh" ; then
-		    ac_cv_c_tkconfig=`(cd ${with_tkconfig}; pwd)`
-		else
-		    AC_MSG_ERROR([${with_tkconfig} directory doesn't contain tkConfig.sh])
-		fi
-	    fi
-
-	    # then check for a private Tk library
-	    if test x"${ac_cv_c_tkconfig}" = x ; then
-		for i in \
-			../tk \
-			`ls -dr ../tk[[8-9]].[[0-9]]* 2>/dev/null` \
-			../../tk \
-			`ls -dr ../../tk[[8-9]].[[0-9]]* 2>/dev/null` \
-			../../../tk \
-			`ls -dr ../../../tk[[8-9]].[[0-9]]* 2>/dev/null` ; do
-		    if test -f "$i/unix/tkConfig.sh" ; then
-			ac_cv_c_tkconfig=`(cd $i/unix; pwd)`
-			break
-		    fi
-		done
-	    fi
-	    # check in a few common install locations
-	    if test x"${ac_cv_c_tkconfig}" = x ; then
-		for i in `ls -d ${prefix}/lib 2>/dev/null` \
-			`ls -d /usr/local/lib 2>/dev/null` ; do
-		    if test -f "$i/tkConfig.sh" ; then
-			ac_cv_c_tkconfig=`(cd $i; pwd)`
-			break
-		    fi
-		done
-	    fi
-	    # check in a few other private locations
-	    if test x"${ac_cv_c_tkconfig}" = x ; then
-		for i in \
-			${srcdir}/../tk \
-			`ls -dr ${srcdir}/../tk[[8-9]].[[0-9]]* 2>/dev/null` ; do
-		    if test -f "$i/unix/tkConfig.sh" ; then
-			ac_cv_c_tkconfig=`(cd $i/unix; pwd)`
-			break
-		    fi
-		done
-	    fi
-	])
-	if test x"${ac_cv_c_tkconfig}" = x ; then
-	    TK_BIN_DIR="# no Tk configs found"
-	    AC_MSG_WARN(Can't find Tk configuration definitions)
-	    exit 0
-	else
-	    no_tk=
-	    TK_BIN_DIR=${ac_cv_c_tkconfig}
-	    AC_MSG_RESULT(found $TK_BIN_DIR/tkConfig.sh)
-	fi
-    fi
-
-])
-
-#------------------------------------------------------------------------
-# SC_LOAD_TCLCONFIG --
-#
-#	Load the tclConfig.sh file
-#
-# Arguments:
-#	
-#	Requires the following vars to be set:
-#		TCL_BIN_DIR
-#
-# Results:
-#
-#	Subst the following vars:
-#		TCL_BIN_DIR
-#		TCL_SRC_DIR
-#		TCL_LIB_FILE
-#
-#------------------------------------------------------------------------
-
-AC_DEFUN(SC_LOAD_TCLCONFIG, [
-    AC_MSG_CHECKING([for existence of $TCL_BIN_DIR/tclConfig.sh])
-
-    if test -f "$TCL_BIN_DIR/tclConfig.sh" ; then
-        AC_MSG_RESULT([loading])
-	. $TCL_BIN_DIR/tclConfig.sh
-    else
-        AC_MSG_RESULT([file not found])
-    fi
-
-    #
-    # The eval is required to do the TCL_DBGX substitution in the
-    # TCL_LIB_FILE variable
-    #
-
-    eval TCL_LIB_FILE=${TCL_LIB_FILE}
-    eval TCL_LIB_FLAG=${TCL_LIB_FLAG}
-
-    AC_SUBST(TCL_DBGX)
-    AC_SUBST(TCL_BIN_DIR)
-    AC_SUBST(TCL_SRC_DIR)
-    AC_SUBST(TCL_LIB_FILE)
-    AC_SUBST(TCL_LIBS)
-    AC_SUBST(TCL_DEFS)
-    AC_SUBST(TCL_SHLIB_LD_LIBS)
-    AC_SUBST(TCL_EXTRA_CFLAGS)
-    AC_SUBST(TCL_LD_FLAGS)
-    AC_SUBST(TCL_LIB_FILE)
-    AC_SUBST(TCL_STUB_LIB_FILE)
-    AC_SUBST(TCL_LIB_SPEC)
-    AC_SUBST(TCL_BUILD_LIB_SPEC)
-    AC_SUBST(TCL_STUB_LIB_SPEC)
-    AC_SUBST(TCL_BUILD_STUB_LIB_SPEC)
-])
-
-#------------------------------------------------------------------------
-# SC_LOAD_TKCONFIG --
-#
-#	Load the tkConfig.sh file
-#
-# Arguments:
-#	
-#	Requires the following vars to be set:
-#		TK_BIN_DIR
-#
-# Results:
-#
-#	Sets the following vars that should be in tkConfig.sh:
-#		TK_BIN_DIR
-#------------------------------------------------------------------------
-
-AC_DEFUN(SC_LOAD_TKCONFIG, [
-    AC_MSG_CHECKING([for existence of $TK_BIN_DIR/tkConfig.sh])
-
-    if test -f "$TK_BIN_DIR/tkConfig.sh" ; then
-        AC_MSG_RESULT([loading])
-	. $TK_BIN_DIR/tkConfig.sh
-    else
-        AC_MSG_RESULT([could not find $TK_BIN_DIR/tkConfig.sh])
-    fi
-
-    AC_SUBST(TK_BIN_DIR)
-    AC_SUBST(TK_SRC_DIR)
-    AC_SUBST(TK_LIB_FILE)
-    AC_SUBST(TK_XINCLUDES)
-])
-
-#------------------------------------------------------------------------
-# SC_ENABLE_GCC --
-#
-#	Allows the use of GCC if available
-#
-# Arguments:
-#	none
-#	
-# Results:
-#
-#	Adds the following arguments to configure:
-#		--enable-gcc
-#
-#	Sets the following vars:
-#		CC	Command to use for the compiler
-#------------------------------------------------------------------------
-
-AC_DEFUN(SC_ENABLE_GCC, [
-    AC_ARG_ENABLE(gcc, [  --enable-gcc            allow use of gcc if available [--disable-gcc]],
-	[ok=$enableval], [ok=no])
-    if test "$ok" = "yes"; then
-	CC=gcc
-    else
-	case "`uname -s`" in
-	    *win32* | *WIN32* | *CYGWIN_NT* | *CYGWIN_98* | *CYGWIN_95*)
-		CC=cl
-	    ;;
-	    *)
-		CC=${CC-cc}
-	    ;;
-	esac
-    fi
-    AC_PROG_CC
-])
-
-#------------------------------------------------------------------------
-# SC_ENABLE_SHARED --
-#
-#	Allows the building of shared libraries
-#
-# Arguments:
-#	none
-#	
-# Results:
-#
-#	Adds the following arguments to configure:
-#		--enable-shared=yes|no
-#
-#	Defines the following vars:
-#		STATIC_BUILD	Used for building import/export libraries
-#				on Windows.
-#
-#	Sets the following vars:
-#		SHARED_BUILD	Value of 1 or 0
-#------------------------------------------------------------------------
-
-AC_DEFUN(SC_ENABLE_SHARED, [
-    AC_MSG_CHECKING([how to build libraries])
-    AC_ARG_ENABLE(shared,
-	[  --enable-shared         build and link with shared libraries [--enable-shared]],
-	[tcl_ok=$enableval], [tcl_ok=yes])
-
-    if test "${enable_shared+set}" = set; then
-	enableval="$enable_shared"
-	tcl_ok=$enableval
-    else
-	tcl_ok=yes
-    fi
-
-    if test "$tcl_ok" = "yes" ; then
-	AC_MSG_RESULT([shared])
-	SHARED_BUILD=1
-    else
-	AC_MSG_RESULT([static])
-	SHARED_BUILD=0
-	AC_DEFINE(STATIC_BUILD)
-    fi
-])
-
-#------------------------------------------------------------------------
-# SC_ENABLE_THREADS --
-#
-#	Specify if thread support should be enabled
-#
-# Arguments:
-#	none
-#	
-# Results:
-#
-#	Adds the following arguments to configure:
-#		--enable-threads
-#
-#	Sets the following vars:
-#		THREADS_LIBS	Thread library(s)
-#
-#	Defines the following vars:
-#		TCL_THREADS
-#		_REENTRANT
-#
-#------------------------------------------------------------------------
-
-AC_DEFUN(SC_ENABLE_THREADS, [
-    AC_MSG_CHECKING(for building with threads)
-    AC_ARG_ENABLE(threads, [  --enable-threads        build with threads],
-	[tcl_ok=$enableval], [tcl_ok=no])
-
-    if test "$tcl_ok" = "yes"; then
-	TCL_THREADS=1
-	AC_DEFINE(TCL_THREADS)
-	AC_DEFINE(_REENTRANT)
-
-	case "`uname -s`" in
-	    *win32* | *WIN32* | *CYGWIN_NT* | *CYGWIN_98* | *CYGWIN_95*)
-		    AC_MSG_RESULT(yes)
-		;;
-	    *)
-		AC_CHECK_LIB(pthread,pthread_mutex_init,tcl_ok=yes,tcl_ok=no)
-		if test "$tcl_ok" = "yes"; then
-		    # The space is needed
-		    THREADS_LIBS=" -lpthread"
-		    AC_MSG_RESULT(yes)
-		else
-		    TCL_THREADS=0
-		    AC_MSG_RESULT(no)
-		    AC_MSG_WARN("Don t know how to find pthread lib on your system - you must disable thread support or edit the LIBS in the Makefile...")
-		fi
-		;;
-	esac
-    else
-	TCL_THREADS=0
-	AC_MSG_RESULT(no (default))
-    fi
-
-])
-
-#------------------------------------------------------------------------
-# SC_ENABLE_SYMBOLS --
-#
-#	Specify if debugging symbols should be used
-#
-# Arguments:
-#	none
-#	
-#	Requires the following vars to be set:
-#		CFLAGS_DEBUG
-#		CFLAGS_OPTIMIZE
-#		LDFLAGS_DEBUG
-#		LDFLAGS_OPTIMIZE
-#	
-# Results:
-#
-#	Adds the following arguments to configure:
-#		--enable-symbols
-#
-#	Defines the following vars:
-#		CFLAGS_DEFAULT	Sets to CFLAGS_DEBUG if true
-#				Sets to CFLAGS_OPTIMIZE if false
-#		LDFLAGS_DEFAULT	Sets to LDFLAGS_DEBUG if true
-#				Sets to LDFLAGS_OPTIMIZE if false
-#		DBGX		Debug library extension
-#
-#------------------------------------------------------------------------
-
-AC_DEFUN(SC_ENABLE_SYMBOLS, [
-    case "`uname -s`" in
-	*win32* | *WIN32* | *CYGWIN_NT* | *CYGWIN_98* | *CYGWIN_95*)
-	    tcl_dbgx=d
-	;;
-	*)
-	    tcl_dbgx=g
-	;;
-    esac
-
-    AC_MSG_CHECKING([for build with symbols])
-    AC_ARG_ENABLE(symbols, [  --enable-symbols        build with debugging symbols [--disable-symbols]],    [tcl_ok=$enableval], [tcl_ok=no])
-    if test "$tcl_ok" = "yes"; then
-	CFLAGS_DEFAULT="${CFLAGS_DEBUG}"
-	LDFLAGS_DEFAULT="${LDFLAGS_DEBUG}"
-	DBGX=${tcl_dbgx}
-	TCL_DBGX=${tcl_dbgx}
-	AC_MSG_RESULT([yes])
-    else
-	CFLAGS_DEFAULT="${CFLAGS_OPTIMIZE}"
-	LDFLAGS_DEFAULT="${LDFLAGS_OPTIMIZE}"
-	DBGX=""
-	TCL_DBGX=""
-	AC_MSG_RESULT([no])
-    fi
-
-    AC_SUBST(TCL_DBGX)
-    AC_SUBST(CFLAGS_DEFAULT)
-    AC_SUBST(LDFLAGS_DEFAULT)
-])
-
-#--------------------------------------------------------------------
-# SC_CONFIG_CFLAGS
-#
-#	Try to determine the proper flags to pass to the compiler
-#	for building shared libraries and other such nonsense.
-#
-# Arguments:
-#	none
-#
-# Results:
-#
-#	Defines the following vars:
-#
-#       DL_OBJS -       Name of the object file that implements dynamic
-#                       loading for Tcl on this system.
-#       DL_LIBS -       Library file(s) to include in tclsh and other base
-#                       applications in order for the "load" command to work.
-#       LDFLAGS -      Flags to pass to the compiler when linking object
-#                       files into an executable application binary such
-#                       as tclsh.
-#       LD_SEARCH_FLAGS-Flags to pass to ld, such as "-R /usr/local/tcl/lib",
-#                       that tell the run-time dynamic linker where to look
-#                       for shared libraries such as libtcl.so.  Depends on
-#                       the variable LIB_RUNTIME_DIR in the Makefile.
-#       MAKE_LIB -      Command to execute to build the Tcl library;
-#                       differs depending on whether or not Tcl is being
-#                       compiled as a shared library.
-#       SHLIB_CFLAGS -  Flags to pass to cc when compiling the components
-#                       of a shared library (may request position-independent
-#                       code, among other things).
-#       SHLIB_LD -      Base command to use for combining object files
-#                       into a shared library.
-#       SHLIB_LD_LIBS - Dependent libraries for the linker to scan when
-#                       creating shared libraries.  This symbol typically
-#                       goes at the end of the "ld" commands that build
-#                       shared libraries. The value of the symbol is
-#                       "${LIBS}" if all of the dependent libraries should
-#                       be specified when creating a shared library.  If
-#                       dependent libraries should not be specified (as on
-#                       SunOS 4.x, where they cause the link to fail, or in
-#                       general if Tcl and Tk aren't themselves shared
-#                       libraries), then this symbol has an empty string
-#                       as its value.
-#       SHLIB_SUFFIX -  Suffix to use for the names of dynamically loadable
-#                       extensions.  An empty string means we don't know how
-#                       to use shared libraries on this platform.
-#       TCL_LIB_FILE -  Name of the file that contains the Tcl library, such
-#                       as libtcl7.8.so or libtcl7.8.a.
-#       TCL_LIB_SUFFIX -Specifies everything that comes after the "libtcl"
-#                       in the shared library name, using the $VERSION variable
-#                       to put the version in the right place.  This is used
-#                       by platforms that need non-standard library names.
-#                       Examples:  ${VERSION}.so.1.1 on NetBSD, since it needs
-#                       to have a version after the .so, and ${VERSION}.a
-#                       on AIX, since the Tcl shared library needs to have
-#                       a .a extension whereas shared objects for loadable
-#                       extensions have a .so extension.  Defaults to
-#                       ${VERSION}${SHLIB_SUFFIX}.
-#       TCL_NEEDS_EXP_FILE -
-#                       1 means that an export file is needed to link to a
-#                       shared library.
-#       TCL_EXP_FILE -  The name of the installed export / import file which
-#                       should be used to link to the Tcl shared library.
-#                       Empty if Tcl is unshared.
-#       TCL_BUILD_EXP_FILE -
-#                       The name of the built export / import file which
-#                       should be used to link to the Tcl shared library.
-#                       Empty if Tcl is unshared.
-#	CFLAGS_DEBUG -
-#			Flags used when running the compiler in debug mode
-#	CFLAGS_OPTIMIZE -
-#			Flags used when running the compiler in optimize mode
-#
-#	EXTRA_CFLAGS
-#
-#	Subst's the following vars:
-#		DL_LIBS
-#		CFLAGS_DEBUG
-#		CFLAGS_OPTIMIZE
-#--------------------------------------------------------------------
-
-AC_DEFUN(SC_CONFIG_CFLAGS, [
-
-    # Step 0: Enable 64 bit support?
-
-    AC_MSG_CHECKING([if 64bit support is enabled])
-    AC_ARG_ENABLE(64bit,[  --enable-64bit          enable 64bit support],,enableval="no")
-
-    if test "$enableval" = "yes"; then
-	AC_MSG_RESULT(Will compile with 64bit support)
-	do64bit=yes
-    else
-	do64bit=no
-    fi
-    AC_MSG_RESULT($do64bit)
- 
-    # Step 1: set the variable "system" to hold the name and version number
-    # for the system.  This can usually be done via the "uname" command, but
-    # there are a few systems, like Next, where this doesn't work.
-
-    AC_MSG_CHECKING([system version (for dynamic loading)])
-    if test -f /usr/lib/NextStep/software_version; then
-	system=NEXTSTEP-`awk '/3/,/3/' /usr/lib/NextStep/software_version`
-    else
-	system=`uname -s`-`uname -r`
-	if test "$?" -ne 0 ; then
-	    AC_MSG_RESULT([unknown (can't find uname command)])
-	    system=unknown
-	else
-	    # Special check for weird MP-RAS system (uname returns weird
-	    # results, and the version is kept in special file).
-	
-	    if test -r /etc/.relid -a "X`uname -n`" = "X`uname -s`" ; then
-		system=MP-RAS-`awk '{print $3}' /etc/.relid'`
-	    fi
-	    if test "`uname -s`" = "AIX" ; then
-		system=AIX-`uname -v`.`uname -r`
-	    fi
-	    AC_MSG_RESULT($system)
-	fi
-    fi
-
-    # Step 2: check for existence of -ldl library.  This is needed because
-    # Linux can use either -ldl or -ldld for dynamic loading.
-
-    AC_CHECK_LIB(dl, dlopen, have_dl=yes, have_dl=no)
-
-    # Step 3: set configuration options based on system name and version.
-
-    do64bit_ok=no
-    fullSrcDir=`cd $srcdir; pwd`
-    EXTRA_CFLAGS=""
-    TCL_EXPORT_FILE_SUFFIX=""
-    UNSHARED_LIB_SUFFIX=""
-    TCL_TRIM_DOTS='`echo ${VERSION} | tr -d .`'
-    ECHO_VERSION='`echo ${VERSION}`'
-    TCL_LIB_VERSIONS_OK=ok
-    CFLAGS_DEBUG=-g
-    CFLAGS_OPTIMIZE=-O
-    TCL_NEEDS_EXP_FILE=0
-    TCL_BUILD_EXP_FILE=""
-    TCL_EXP_FILE=""
-    STLIB_LD="ar cr"
-    case $system in
-	AIX-4.[[2-9]])
-	    SHLIB_CFLAGS=""
-	    SHLIB_LD="$fullSrcDir/ldAix /bin/ld -bhalt:4 -bM:SRE -bE:lib.exp -H512 -T512 -bnoentry"
-	    SHLIB_LD_LIBS='${LIBS}'
-	    SHLIB_SUFFIX=".so"
-	    DL_OBJS="tclLoadDl.o"
-	    DL_LIBS="-ldl"
-	    LDFLAGS=""
-	    LD_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}'
-	    TCL_NEEDS_EXP_FILE=1
-	    TCL_EXPORT_FILE_SUFFIX='${VERSION}\$\{DBGX\}.exp'
-	    ;;
-	AIX-*)
-	    SHLIB_CFLAGS=""
-	    SHLIB_LD="$fullSrcDir/ldAix /bin/ld -bhalt:4 -bM:SRE -bE:lib.exp -H512 -T512"
-	    SHLIB_LD_LIBS='${LIBS}'
-	    SHLIB_SUFFIX=".so"
-	    DL_OBJS="tclLoadDl.o"
-	    LIBOBJS="$LIBOBJS tclLoadAix.o"
-	    DL_LIBS="-lld"
-	    LDFLAGS=""
-	    LD_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}'
-	    TCL_NEEDS_EXP_FILE=1
-	    TCL_EXPORT_FILE_SUFFIX='${VERSION}\$\{DBGX\}.exp'
-	    ;;
-	BSD/OS-2.1*|BSD/OS-3*)
-	    SHLIB_CFLAGS=""
-	    SHLIB_LD="shlicc -r"
-	    SHLIB_LD_LIBS='${LIBS}'
-	    SHLIB_SUFFIX=".so"
-	    DL_OBJS="tclLoadDl.o"
-	    DL_LIBS="-ldl"
-	    LDFLAGS=""
-	    LD_SEARCH_FLAGS=""
-	    ;;
-	BSD/OS-4.*)
-	    SHLIB_CFLAGS="-export-dynamic -fPIC"
-	    SHLIB_LD="cc -shared"
-	    SHLIB_LD_LIBS='${LIBS}'
-	    SHLIB_SUFFIX=".so"
-	    DL_OBJS="tclLoadDl.o"
-	    DL_LIBS="-ldl"
-	    LDFLAGS="-export-dynamic"
-	    LD_SEARCH_FLAGS=""
-	    ;;
-	*win32*|*WIN32*|CYGWIN_NT*|cygwin_nt*|*CYGWIN_98*|*CYGWIN_95*)
-	    CFLAGS_DEBUG="-nologo -Z7 -Od -WX ${runtime}d"
-	    CFLAGS_OPTIMIZE="-nologo -Oti -Gs -GD ${runtime}"
-	    LDFLAGS_CONSOLE="-subsystem:console"
-	    LDFLAGS_WINDOW="-subsystem:windows"
-	    LDFLAGS_DEBUG="-debug:full -debugtype:cv"
-	    LDFLAGS_OPTIMIZE="-release"
-	    EXTRA_CFLAGS="-YX"
-	    PATHTYPE=-w
-	    STLIB_LD="lib -nologo"
-	    SHLIB_LD="link -dll -nologo"
-	    SHLIB_LD_LIBS="user32.lib advapi32.lib"
-	    RC="rc"
-	    ;;
-	dgux*)
-	    SHLIB_CFLAGS="-K PIC"
-	    SHLIB_LD="cc -G"
-	    SHLIB_LD_LIBS=""
-	    SHLIB_SUFFIX=".so"
-	    DL_OBJS="tclLoadDl.o"
-	    DL_LIBS="-ldl"
-	    LDFLAGS=""
-	    LD_SEARCH_FLAGS=""
-	    ;;
-	HP-UX-*.08.*|HP-UX-*.09.*|HP-UX-*.10.*|HP-UX-*.11.*)
-	    SHLIB_SUFFIX=".sl"
-	    AC_CHECK_LIB(dld, shl_load, tcl_ok=yes, tcl_ok=no)
-	    if test "$tcl_ok" = yes; then
-		SHLIB_CFLAGS="+z"
-		SHLIB_LD="ld -b"
-		SHLIB_LD_LIBS=""
-		DL_OBJS="tclLoadShl.o"
-		DL_LIBS="-ldld"
-		LDFLAGS="-Wl,-E"
-		LD_SEARCH_FLAGS='-Wl,+s,+b,${LIB_RUNTIME_DIR}:.'
-	    fi
-	    ;;
-	IRIX-4.*)
-	    SHLIB_CFLAGS="-G 0"
-	    SHLIB_SUFFIX=".a"
-	    SHLIB_LD="echo tclLdAout $CC \{$SHLIB_CFLAGS\} | `pwd`/tclsh -r -G 0"
-	    SHLIB_LD_LIBS='${LIBS}'
-	    DL_OBJS="tclLoadAout.o"
-	    DL_LIBS=""
-	    LDFLAGS="-Wl,-D,08000000"
-	    LD_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}'
-	    SHARED_LIB_SUFFIX='${VERSION}\$\{DBGX\}.a'
-	    ;;
-	IRIX-5.*|IRIX-6.*|IRIX64-6.5*)
-	    SHLIB_CFLAGS=""
-	    SHLIB_LD="ld -n32 -shared -rdata_shared"
-	    SHLIB_LD_LIBS=""
-	    SHLIB_SUFFIX=".so"
-	    DL_OBJS="tclLoadDl.o"
-	    DL_LIBS=""
-	    LD_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}'
-	    if test "$CC" = "gcc" -o `$CC -v 2>&1 | grep -c gcc` != "0" ; then
-		EXTRA_CFLAGS="-mabi=n32"
-		LDFLAGS="-mabi=n32"
-	    else
-		case $system in
-		    IRIX-6.3)
-			# Use to build 6.2 compatible binaries on 6.3.
-			EXTRA_CFLAGS="-n32 -D_OLD_TERMIOS"
-			;;
-		    *)
-			EXTRA_CFLAGS="-n32"
-			;;
-		esac
-		LDFLAGS="-n32"
-	    fi
-	    ;;
-	IRIX64-6.*)
-	    SHLIB_CFLAGS=""
-	    SHLIB_LD="ld -32 -shared -rdata_shared"
-	    SHLIB_LD_LIBS='${LIBS}'
-	    SHLIB_SUFFIX=".so"
-	    DL_OBJS="tclLoadDl.o"
-	    DL_LIBS=""
-	    LDFLAGS=""
-	    LD_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}'
-	    ;;
-	Linux*)
-	    SHLIB_CFLAGS="-fPIC"
-	    SHLIB_LD_LIBS='${LIBS}'
-	    SHLIB_SUFFIX=".so"
-
-	    # egcs-2.91.66 on Redhat Linux 6.0 generates lots of warnings 
-	    # when you inline the string and math operations.  Turn this off to
-	    # get rid of the warnings.
-
-	    CFLAGS_OPTIMIZE="${CFLAGS_OPTIMIZE} -D__NO_STRING_INLINES -D__NO_MATH_INLINES"
-
-	    if test "$have_dl" = yes; then
-		SHLIB_LD="${CC} -shared"
-		DL_OBJS="tclLoadDl.o"
-		DL_LIBS="-ldl"
-		LDFLAGS="-rdynamic"
-		LD_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}'
-	    else
-		AC_CHECK_HEADER(dld.h, [
-		    SHLIB_LD="ld -shared"
-		    DL_OBJS="tclLoadDld.o"
-		    DL_LIBS="-ldld"
-		    LDFLAGS=""
-		    LD_SEARCH_FLAGS=""])
-	    fi
-	    if test "`uname -m`" = "alpha" ; then
-		EXTRA_CFLAGS="-mieee"
-	    fi
-	    ;;
-	MP-RAS-02*)
-	    SHLIB_CFLAGS="-K PIC"
-	    SHLIB_LD="cc -G"
-	    SHLIB_LD_LIBS=""
-	    SHLIB_SUFFIX=".so"
-	    DL_OBJS="tclLoadDl.o"
-	    DL_LIBS="-ldl"
-	    LDFLAGS=""
-	    LD_SEARCH_FLAGS=""
-	    ;;
-	MP-RAS-*)
-	    SHLIB_CFLAGS="-K PIC"
-	    SHLIB_LD="cc -G"
-	    SHLIB_LD_LIBS=""
-	    SHLIB_SUFFIX=".so"
-	    DL_OBJS="tclLoadDl.o"
-	    DL_LIBS="-ldl"
-	    LDFLAGS="-Wl,-Bexport"
-	    LD_SEARCH_FLAGS=""
-	    ;;
-	NetBSD-*|FreeBSD-[[12]].*|OpenBSD-*)
-	    # Not available on all versions:  check for include file.
-	    AC_CHECK_HEADER(dlfcn.h, [
-		SHLIB_CFLAGS="-fpic"
-		SHLIB_LD="ld -Bshareable -x"
-		SHLIB_LD_LIBS=""
-		SHLIB_SUFFIX=".so"
-		DL_OBJS="tclLoadDl.o"
-		DL_LIBS=""
-		LDFLAGS=""
-		LD_SEARCH_FLAGS=""
-		SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}\$\{DBGX\}.so.1.0'
-	    ], [
-		SHLIB_CFLAGS=""
-		SHLIB_LD="echo tclLdAout $CC \{$SHLIB_CFLAGS\} | `pwd`/tclsh -r"
-		SHLIB_LD_LIBS='${LIBS}'
-		SHLIB_SUFFIX=".a"
-		DL_OBJS="tclLoadAout.o"
-		DL_LIBS=""
-		LDFLAGS=""
-		LD_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}'
-		SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}\$\{DBGX\}.a'
-	    ])
-
-	    # FreeBSD doesn't handle version numbers with dots.
-
-	    UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}\$\{DBGX\}.a'
-	    TCL_LIB_VERSIONS_OK=nodots
-	    ;;
-	FreeBSD-*)
-	    # FreeBSD 3.* and greater have ELF.
-	    SHLIB_CFLAGS="-fpic"
-	    SHLIB_LD="ld -Bshareable -x"
-	    SHLIB_LD_LIBS=""
-	    SHLIB_SUFFIX=".so"
-	    DL_OBJS="tclLoadDl.o"
-	    DL_LIBS=""
-	    LDFLAGS=""
-	    LD_SEARCH_FLAGS=""
-	    ;;
-	NEXTSTEP-*)
-	    SHLIB_CFLAGS=""
-	    SHLIB_LD="cc -nostdlib -r"
-	    SHLIB_LD_LIBS=""
-	    SHLIB_SUFFIX=".so"
-	    DL_OBJS="tclLoadNext.o"
-	    DL_LIBS=""
-	    LDFLAGS=""
-	    LD_SEARCH_FLAGS=""
-	    ;;
-	OS/390-*)
-	    CFLAGS_OPTIMIZE=""      # Optimizer is buggy
-	    AC_DEFINE(_OE_SOCKETS)  # needed in sys/socket.h
-	    ;;      
-	OSF1-1.0|OSF1-1.1|OSF1-1.2)
-	    # OSF/1 1.[012] from OSF, and derivatives, including Paragon OSF/1
-	    SHLIB_CFLAGS=""
-	    # Hack: make package name same as library name
-	    SHLIB_LD='ld -R -export $@:'
-	    SHLIB_LD_LIBS=""
-	    SHLIB_SUFFIX=".so"
-	    DL_OBJS="tclLoadOSF.o"
-	    DL_LIBS=""
-	    LDFLAGS=""
-	    LD_SEARCH_FLAGS=""
-	    ;;
-	OSF1-1.*)
-	    # OSF/1 1.3 from OSF using ELF, and derivatives, including AD2
-	    SHLIB_CFLAGS="-fpic"
-	    SHLIB_LD="ld -shared"
-	    SHLIB_LD_LIBS=""
-	    SHLIB_SUFFIX=".so"
-	    DL_OBJS="tclLoadDl.o"
-	    DL_LIBS=""
-	    LDFLAGS=""
-	    LD_SEARCH_FLAGS=""
-	    ;;
-	OSF1-V*)
-	    # Digital OSF/1
-	    SHLIB_CFLAGS=""
-	    SHLIB_LD='ld -shared -expect_unresolved "*"'
-	    SHLIB_LD_LIBS=""
-	    SHLIB_SUFFIX=".so"
-	    DL_OBJS="tclLoadDl.o"
-	    DL_LIBS=""
-	    LDFLAGS=""
-	    LD_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}'
-	    ;;
-	RISCos-*)
-	    SHLIB_CFLAGS="-G 0"
-	    SHLIB_LD="echo tclLdAout $CC \{$SHLIB_CFLAGS\} | `pwd`/tclsh -r -G 0"
-	    SHLIB_LD_LIBS='${LIBS}'
-	    SHLIB_SUFFIX=".a"
-	    DL_OBJS="tclLoadAout.o"
-	    DL_LIBS=""
-	    LDFLAGS="-Wl,-D,08000000"
-	    LD_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}'
-	    ;;
-	SCO_SV-3.2*)
-	    # Note, dlopen is available only on SCO 3.2.5 and greater.  However,
-	    # this test works, since "uname -s" was non-standard in 3.2.4 and
-	    # below.
-	    SHLIB_CFLAGS="-Kpic -belf"
-	    SHLIB_LD="ld -G"
-	    SHLIB_LD_LIBS=""
-	    SHLIB_SUFFIX=".so"
-	    DL_OBJS="tclLoadDl.o"
-	    DL_LIBS=""
-	    LDFLAGS="-belf -Wl,-Bexport"
-	    LD_SEARCH_FLAGS=""
-	    ;;
-	SINIX*5.4*)
-	    SHLIB_CFLAGS="-K PIC"
-	    SHLIB_LD="cc -G"
-	    SHLIB_LD_LIBS=""
-	    SHLIB_SUFFIX=".so"
-	    DL_OBJS="tclLoadDl.o"
-	    DL_LIBS="-ldl"
-	    LDFLAGS=""
-	    LD_SEARCH_FLAGS=""
-	    ;;
-	SunOS-4*)
-	    SHLIB_CFLAGS="-PIC"
-	    SHLIB_LD="ld"
-	    SHLIB_LD_LIBS=""
-	    SHLIB_SUFFIX=".so"
-	    DL_OBJS="tclLoadDl.o"
-	    DL_LIBS="-ldl"
-	    LDFLAGS=""
-	    LD_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}'
-
-	    # SunOS can't handle version numbers with dots in them in library
-	    # specs, like -ltcl7.5, so use -ltcl75 instead.  Also, it
-	    # requires an extra version number at the end of .so file names.
-	    # So, the library has to have a name like libtcl75.so.1.0
-
-	    SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}\$\{DBGX\}.so.1.0'
-	    UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}\$\{DBGX\}.a'
-	    TCL_LIB_VERSIONS_OK=nodots
-	    ;;
-	SunOS-5.[[0-6]]*)
-	    SHLIB_CFLAGS="-KPIC"
-	    SHLIB_LD="/usr/ccs/bin/ld -G -z text"
-
-	    # Note: need the LIBS below, otherwise Tk won't find Tcl's
-	    # symbols when dynamically loaded into tclsh.
-
-	    SHLIB_LD_LIBS='${LIBS}'
-	    SHLIB_SUFFIX=".so"
-	    DL_OBJS="tclLoadDl.o"
-	    DL_LIBS="-ldl"
-	    LDFLAGS=""
-	    LD_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}'
-	    ;;
-	SunOS-5*)
-	    SHLIB_CFLAGS="-KPIC"
-	    SHLIB_LD="/usr/ccs/bin/ld -G -z text"
-	    LDFLAGS=""
-    
-	    do64bit_ok=no
-	    if test "$do64bit" = "yes" ; then
-	    arch=`isainfo`
-	    if test "$arch" = "sparcv9 sparc" ; then
-		if test "$CC" != "gcc" -a `$CC -v 2>&1 | grep -c gcc` = "0" ; then
-		do64bit_ok=yes
-		EXTRA_CFLAGS="-xarch=v9"
-		LDFLAGS="-xarch=v9"
-		else 
-		AC_MSG_WARN("64bit mode not supported using GCC on $system")
-		fi
-	    else
-		AC_MSG_WARN("64bit mode only supported sparcv9 system")
-	    fi
-	    fi
-	    
-	    # Note: need the LIBS below, otherwise Tk won't find Tcl's
-	    # symbols when dynamically loaded into tclsh.
-
-	    SHLIB_LD_LIBS='${LIBS}'
-	    SHLIB_SUFFIX=".so"
-	    DL_OBJS="tclLoadDl.o"
-	    DL_LIBS="-ldl"
-	    if test "$CC" = "gcc" -o `$CC -v 2>&1 | grep -c gcc` != "0" ; then
-		LD_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}'
-	    else
-		LD_SEARCH_FLAGS='-R ${LIB_RUNTIME_DIR}'
-	    fi
-	    ;;
-	ULTRIX-4.*)
-	    SHLIB_CFLAGS="-G 0"
-	    SHLIB_SUFFIX=".a"
-	    SHLIB_LD="echo tclLdAout $CC \{$SHLIB_CFLAGS\} | `pwd`/tclsh -r -G 0"
-	    SHLIB_LD_LIBS='${LIBS}'
-	    DL_OBJS="tclLoadAout.o"
-	    DL_LIBS=""
-	    LDFLAGS="-Wl,-D,08000000"
-	    LD_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}'
-	    ;;
-	UNIX_SV* | UnixWare-5*)
-	    SHLIB_CFLAGS="-KPIC"
-	    SHLIB_LD="cc -G"
-	    SHLIB_LD_LIBS=""
-	    SHLIB_SUFFIX=".so"
-	    DL_OBJS="tclLoadDl.o"
-	    DL_LIBS="-ldl"
-	    # Some UNIX_SV* systems (unixware 1.1.2 for example) have linkers
-	    # that don't grok the -Bexport option.  Test that it does.
-	    hold_ldflags=$LDFLAGS
-	    AC_MSG_CHECKING(for ld accepts -Bexport flag)
-	    LDFLAGS="${LDFLAGS} -Wl,-Bexport"
-	    AC_TRY_LINK(, [int i;], found=yes, found=no)
-	    LDFLAGS=$hold_ldflags
-	    AC_MSG_RESULT($found)
-	    if test $found = yes; then
-	    LDFLAGS="-Wl,-Bexport"
-	    else
-	    LDFLAGS=""
-	    fi
-	    LD_SEARCH_FLAGS=""
-	    ;;
-    esac
-
-    if test "$do64bit" = "yes" -a "$do64bit_ok" = "no" ; then
-    AC_MSG_WARN("64bit support being disabled -- not supported on this platform")
-    fi
-
-    # Step 4: If pseudo-static linking is in use (see K. B. Kenny, "Dynamic
-    # Loading for Tcl -- What Became of It?".  Proc. 2nd Tcl/Tk Workshop,
-    # New Orleans, LA, Computerized Processes Unlimited, 1994), then we need
-    # to determine which of several header files defines the a.out file
-    # format (a.out.h, sys/exec.h, or sys/exec_aout.h).  At present, we
-    # support only a file format that is more or less version-7-compatible. 
-    # In particular,
-    #	- a.out files must begin with `struct exec'.
-    #	- the N_TXTOFF on the `struct exec' must compute the seek address
-    #	  of the text segment
-    #	- The `struct exec' must contain a_magic, a_text, a_data, a_bss
-    #	  and a_entry fields.
-    # The following compilation should succeed if and only if either sys/exec.h
-    # or a.out.h is usable for the purpose.
-    #
-    # Note that the modified COFF format used on MIPS Ultrix 4.x is usable; the
-    # `struct exec' includes a second header that contains information that
-    # duplicates the v7 fields that are needed.
-
-    if test "x$DL_OBJS" = "xtclLoadAout.o" ; then
-	AC_MSG_CHECKING(sys/exec.h)
-	AC_TRY_COMPILE([#include <sys/exec.h>],[
-	    struct exec foo;
-	    unsigned long seek;
-	    int flag;
-#if defined(__mips) || defined(mips)
-	    seek = N_TXTOFF (foo.ex_f, foo.ex_o);
-#else
-	    seek = N_TXTOFF (foo);
-#endif
-	    flag = (foo.a_magic == OMAGIC);
-	    return foo.a_text + foo.a_data + foo.a_bss + foo.a_entry;
-    ], tcl_ok=usable, tcl_ok=unusable)
-	AC_MSG_RESULT($tcl_ok)
-	if test $tcl_ok = usable; then
-	    AC_DEFINE(USE_SYS_EXEC_H)
-	else
-	    AC_MSG_CHECKING(a.out.h)
-	    AC_TRY_COMPILE([#include <a.out.h>],[
-		struct exec foo;
-		unsigned long seek;
-		int flag;
-#if defined(__mips) || defined(mips)
-		seek = N_TXTOFF (foo.ex_f, foo.ex_o);
-#else
-		seek = N_TXTOFF (foo);
-#endif
-		flag = (foo.a_magic == OMAGIC);
-		return foo.a_text + foo.a_data + foo.a_bss + foo.a_entry;
-	    ], tcl_ok=usable, tcl_ok=unusable)
-	    AC_MSG_RESULT($tcl_ok)
-	    if test $tcl_ok = usable; then
-		AC_DEFINE(USE_A_OUT_H)
-	    else
-		AC_MSG_CHECKING(sys/exec_aout.h)
-		AC_TRY_COMPILE([#include <sys/exec_aout.h>],[
-		    struct exec foo;
-		    unsigned long seek;
-		    int flag;
-#if defined(__mips) || defined(mips)
-		    seek = N_TXTOFF (foo.ex_f, foo.ex_o);
-#else
-		    seek = N_TXTOFF (foo);
-#endif
-		    flag = (foo.a_midmag == OMAGIC);
-		    return foo.a_text + foo.a_data + foo.a_bss + foo.a_entry;
-		], tcl_ok=usable, tcl_ok=unusable)
-		AC_MSG_RESULT($tcl_ok)
-		if test $tcl_ok = usable; then
-		    AC_DEFINE(USE_SYS_EXEC_AOUT_H)
-		else
-		    DL_OBJS=""
-		fi
-	    fi
-	fi
-    fi
-
-    # Step 5: disable dynamic loading if requested via a command-line switch.
-
-    AC_ARG_ENABLE(load, [  --disable-load          disallow dynamic loading and "load" command],
-	[tcl_ok=$enableval], [tcl_ok=yes])
-    if test "$tcl_ok" = "no"; then
-	DL_OBJS=""
-    fi
-
-    if test "x$DL_OBJS" != "x" ; then
-	BUILD_DLTEST="\$(DLTEST_TARGETS)"
-    else
-	echo "Can't figure out how to do dynamic loading or shared libraries"
-	echo "on this system."
-	SHLIB_CFLAGS=""
-	SHLIB_LD=""
-	SHLIB_SUFFIX=""
-	DL_OBJS="tclLoadNone.o"
-	DL_LIBS=""
-	LDFLAGS=""
-	LD_SEARCH_FLAGS=""
-	BUILD_DLTEST=""
-    fi
-
-    # If we're running gcc, then change the C flags for compiling shared
-    # libraries to the right flags for gcc, instead of those for the
-    # standard manufacturer compiler.
-
-    if test "$DL_OBJS" != "tclLoadNone.o" ; then
-	if test "$CC" = "gcc" -o `$CC -v 2>&1 | grep -c gcc` != "0" ; then
-	    case $system in
-		AIX-*)
-		    ;;
-		BSD/OS*)
-		    ;;
-		IRIX*)
-		    ;;
-		NetBSD-*|FreeBSD-*|OpenBSD-*)
-		    ;;
-		RISCos-*)
-		    ;;
-		ULTRIX-4.*)
-		    ;;
-		*)
-		    SHLIB_CFLAGS="-fPIC"
-		    ;;
-	    esac
-	fi
-    fi
-
-    if test "$SHARED_LIB_SUFFIX" = "" ; then
-	SHARED_LIB_SUFFIX='${VERSION}\$\{DBGX\}${SHLIB_SUFFIX}'
-    fi
-    if test "$UNSHARED_LIB_SUFFIX" = "" ; then
-	UNSHARED_LIB_SUFFIX='${VERSION}\$\{DBGX\}.a'
-    fi
-
-    AC_SUBST(STLIB_LD)
-    AC_SUBST(SHLIB_LD)
-    AC_SUBST(SHLIB_CFLAGS)
-    AC_SUBST(SHLIB_LDFLAGS)
-    AC_SUBST(DL_LIBS)
-    AC_SUBST(CFLAGS_DEBUG)
-    AC_SUBST(CFLAGS_OPTIMIZE)
-    AC_SUBST(LDFLAGS_DEBUG)
-    AC_SUBST(LDFLAGS_OPTIMIZE)
-])
-
-#--------------------------------------------------------------------
-# SC_SERIAL_PORT
-#
-#	Determine which interface to use to talk to the serial port.
-#	Note that #include lines must begin in leftmost column for
-#	some compilers to recognize them as preprocessor directives.
-#
-# Arguments:
-#	none
-#	
-# Results:
-#
-#	Defines only one of the following vars:
-#		USE_TERMIOS
-#		USE_TERMIO
-#		USE_SGTTY
-#
-#--------------------------------------------------------------------
-
-AC_DEFUN(SC_SERIAL_PORT, [
-    AC_MSG_CHECKING([termios vs. termio vs. sgtty])
-
-    AC_TRY_RUN([
-#include <termios.h>
-
-main()
-{
-    struct termios t;
-    if (tcgetattr(0, &t) == 0) {
-	cfsetospeed(&t, 0);
-	t.c_cflag |= PARENB | PARODD | CSIZE | CSTOPB;
-	return 0;
-    }
-    return 1;
-}], tk_ok=termios, tk_ok=no, tk_ok=no)
-
-    if test $tk_ok = termios; then
-	AC_DEFINE(USE_TERMIOS)
-    else
-	AC_TRY_RUN([
-#include <termio.h>
-
-main()
-{
-    struct termio t;
-    if (ioctl(0, TCGETA, &t) == 0) {
-	t.c_cflag |= CBAUD | PARENB | PARODD | CSIZE | CSTOPB;
-	return 0;
-    }
-    return 1;
-    }], tk_ok=termio, tk_ok=no, tk_ok=no)
-
-    if test $tk_ok = termio; then
-	AC_DEFINE(USE_TERMIO)
-    else
-	AC_TRY_RUN([
-#include <sgtty.h>
-
-main()
-{
-    struct sgttyb t;
-    if (ioctl(0, TIOCGETP, &t) == 0) {
-	t.sg_ospeed = 0;
-	t.sg_flags |= ODDP | EVENP | RAW;
-	return 0;
-    }
-    return 1;
-}], tk_ok=sgtty, tk_ok=none, tk_ok=none)
-    if test $tk_ok = sgtty; then
-	AC_DEFINE(USE_SGTTY)
-    fi
-    fi
-    fi
-    AC_MSG_RESULT($tk_ok)
-])
-
-#--------------------------------------------------------------------
-# SC_MISSING_POSIX_HEADERS
-#
-#	Supply substitutes for missing POSIX header files.  Special
-#	notes:
-#	    - stdlib.h doesn't define strtol, strtoul, or
-#	      strtod insome versions of SunOS
-#	    - some versions of string.h don't declare procedures such
-#	      as strstr
-#
-# Arguments:
-#	none
-#	
-# Results:
-#
-#	Defines some of the following vars:
-#		NO_DIRENT_H
-#		NO_ERRNO_H
-#		NO_VALUES_H
-#		NO_LIMITS_H
-#		NO_STDLIB_H
-#		NO_STRING_H
-#		NO_SYS_WAIT_H
-#		NO_DLFCN_H
-#		HAVE_UNISTD_H
-#		HAVE_SYS_PARAM_H
-#
-#		HAVE_STRING_H ?
-#
-#--------------------------------------------------------------------
-
-AC_DEFUN(SC_MISSING_POSIX_HEADERS, [
-
-    AC_MSG_CHECKING(dirent.h)
-    AC_TRY_LINK([#include <sys/types.h>
-#include <dirent.h>], [
-#ifndef _POSIX_SOURCE
-#   ifdef __Lynx__
-	/*
-	 * Generate compilation error to make the test fail:  Lynx headers
-	 * are only valid if really in the POSIX environment.
-	 */
-
-	missing_procedure();
-#   endif
-#endif
-DIR *d;
-struct dirent *entryPtr;
-char *p;
-d = opendir("foobar");
-entryPtr = readdir(d);
-p = entryPtr->d_name;
-closedir(d);
-], tcl_ok=yes, tcl_ok=no)
-
-    if test $tcl_ok = no; then
-	AC_DEFINE(NO_DIRENT_H)
-    fi
-
-    AC_MSG_RESULT($tcl_ok)
-    AC_CHECK_HEADER(errno.h, , AC_DEFINE(NO_ERRNO_H))
-    AC_CHECK_HEADER(float.h, , AC_DEFINE(NO_FLOAT_H))
-    AC_CHECK_HEADER(values.h, , AC_DEFINE(NO_VALUES_H))
-    AC_CHECK_HEADER(limits.h, , AC_DEFINE(NO_LIMITS_H))
-    AC_CHECK_HEADER(stdlib.h, tcl_ok=1, tcl_ok=0)
-    AC_EGREP_HEADER(strtol, stdlib.h, , tcl_ok=0)
-    AC_EGREP_HEADER(strtoul, stdlib.h, , tcl_ok=0)
-    AC_EGREP_HEADER(strtod, stdlib.h, , tcl_ok=0)
-    if test $tcl_ok = 0; then
-	AC_DEFINE(NO_STDLIB_H)
-    fi
-    AC_CHECK_HEADER(string.h, tcl_ok=1, tcl_ok=0)
-    AC_EGREP_HEADER(strstr, string.h, , tcl_ok=0)
-    AC_EGREP_HEADER(strerror, string.h, , tcl_ok=0)
-
-    # See also memmove check below for a place where NO_STRING_H can be
-    # set and why.
-
-    if test $tcl_ok = 0; then
-	AC_DEFINE(NO_STRING_H)
-    fi
-
-    AC_CHECK_HEADER(sys/wait.h, , AC_DEFINE(NO_SYS_WAIT_H))
-    AC_CHECK_HEADER(dlfcn.h, , AC_DEFINE(NO_DLFCN_H))
-
-    # OS/390 lacks sys/param.h (and doesn't need it, by chance).
-
-    AC_HAVE_HEADERS(unistd.h sys/param.h)
-
-])
-
-#--------------------------------------------------------------------
-# SC_PATH_X
-#
-#	Locate the X11 header files and the X11 library archive.  Try
-#	the ac_path_x macro first, but if it doesn't find the X stuff
-#	(e.g. because there's no xmkmf program) then check through
-#	a list of possible directories.  Under some conditions the
-#	autoconf macro will return an include directory that contains
-#	no include files, so double-check its result just to be safe.
-#
-# Arguments:
-#	none
-#	
-# Results:
-#
-#	Sets the the following vars:
-#		XINCLUDES
-#		XLIBSW
-#
-#--------------------------------------------------------------------
-
-AC_DEFUN(SC_PATH_X, [
-    AC_PATH_X
-    not_really_there=""
-    if test "$no_x" = ""; then
-	if test "$x_includes" = ""; then
-	    AC_TRY_CPP([#include <X11/XIntrinsic.h>], , not_really_there="yes")
-	else
-	    if test ! -r $x_includes/X11/Intrinsic.h; then
-		not_really_there="yes"
-	    fi
-	fi
-    fi
-    if test "$no_x" = "yes" -o "$not_really_there" = "yes"; then
-	AC_MSG_CHECKING(for X11 header files)
-	XINCLUDES="# no special path needed"
-	AC_TRY_CPP([#include <X11/Intrinsic.h>], , XINCLUDES="nope")
-	if test "$XINCLUDES" = nope; then
-	    dirs="/usr/unsupported/include /usr/local/include /usr/X386/include /usr/X11R6/include /usr/X11R5/include /usr/include/X11R5 /usr/include/X11R4 /usr/openwin/include /usr/X11/include /usr/sww/include"
-	    for i in $dirs ; do
-		if test -r $i/X11/Intrinsic.h; then
-		    AC_MSG_RESULT($i)
-		    XINCLUDES=" -I$i"
-		    break
-		fi
-	    done
-	fi
-    else
-	if test "$x_includes" != ""; then
-	    XINCLUDES=-I$x_includes
-	else
-	    XINCLUDES="# no special path needed"
-	fi
-    fi
-    if test "$XINCLUDES" = nope; then
-	AC_MSG_RESULT(couldn't find any!)
-	XINCLUDES="# no include files found"
-    fi
-
-    if test "$no_x" = yes; then
-	AC_MSG_CHECKING(for X11 libraries)
-	XLIBSW=nope
-	dirs="/usr/unsupported/lib /usr/local/lib /usr/X386/lib /usr/X11R6/lib /usr/X11R5/lib /usr/lib/X11R5 /usr/lib/X11R4 /usr/openwin/lib /usr/X11/lib /usr/sww/X11/lib"
-	for i in $dirs ; do
-	    if test -r $i/libX11.a -o -r $i/libX11.so -o -r $i/libX11.sl; then
-		AC_MSG_RESULT($i)
-		XLIBSW="-L$i -lX11"
-		x_libraries="$i"
-		break
-	    fi
-	done
-    else
-	if test "$x_libraries" = ""; then
-	    XLIBSW=-lX11
-	else
-	    XLIBSW="-L$x_libraries -lX11"
-	fi
-    fi
-    if test "$XLIBSW" = nope ; then
-	AC_CHECK_LIB(Xwindow, XCreateWindow, XLIBSW=-lXwindow)
-    fi
-    if test "$XLIBSW" = nope ; then
-	AC_MSG_RESULT(couldn't find any!  Using -lX11.)
-	XLIBSW=-lX11
-    fi
-])
-#--------------------------------------------------------------------
-# SC_BLOCKING_STYLE
-#
-#	The statements below check for systems where POSIX-style
-#	non-blocking I/O (O_NONBLOCK) doesn't work or is unimplemented. 
-#	On these systems (mostly older ones), use the old BSD-style
-#	FIONBIO approach instead.
-#
-# Arguments:
-#	none
-#	
-# Results:
-#
-#	Defines some of the following vars:
-#		HAVE_SYS_IOCTL_H
-#		HAVE_SYS_FILIO_H
-#		USE_FIONBIO
-#		O_NONBLOCK
-#
-#--------------------------------------------------------------------
-
-AC_DEFUN(SC_BLOCKING_STYLE, [
-    AC_CHECK_HEADERS(sys/ioctl.h)
-    AC_CHECK_HEADERS(sys/filio.h)
-    AC_MSG_CHECKING([FIONBIO vs. O_NONBLOCK for nonblocking I/O])
-    if test -f /usr/lib/NextStep/software_version; then
-	system=NEXTSTEP-`awk '/3/,/3/' /usr/lib/NextStep/software_version`
-    else
-	system=`uname -s`-`uname -r`
-	if test "$?" -ne 0 ; then
-	    system=unknown
-	else
-	    # Special check for weird MP-RAS system (uname returns weird
-	    # results, and the version is kept in special file).
-	
-	    if test -r /etc/.relid -a "X`uname -n`" = "X`uname -s`" ; then
-		system=MP-RAS-`awk '{print $3}' /etc/.relid'`
-	    fi
-	    if test "`uname -s`" = "AIX" ; then
-		system=AIX-`uname -v`.`uname -r`
-	    fi
-	fi
-    fi
-    case $system in
-	# There used to be code here to use FIONBIO under AIX.  However, it
-	# was reported that FIONBIO doesn't work under AIX 3.2.5.  Since
-	# using O_NONBLOCK seems fine under AIX 4.*, I removed the FIONBIO
-	# code (JO, 5/31/97).
-
-	OSF*)
-	    AC_DEFINE(USE_FIONBIO)
-	    AC_MSG_RESULT(FIONBIO)
-	    ;;
-	SunOS-4*)
-	    AC_DEFINE(USE_FIONBIO)
-	    AC_MSG_RESULT(FIONBIO)
-	    ;;
-	ULTRIX-4.*)
-	    AC_DEFINE(USE_FIONBIO)
-	    AC_MSG_RESULT(FIONBIO)
-	    ;;
-	*)
-	    AC_MSG_RESULT(O_NONBLOCK)
-	    ;;
-    esac
-])
-
-#--------------------------------------------------------------------
-# SC_HAVE_VFORK
-#
-#	Check to see whether the system provides a vfork kernel call.
-#	If not, then use fork instead.  Also, check for a problem with
-#	vforks and signals that can cause core dumps if a vforked child
-#	resets a signal handler.  If the problem exists, then use fork
-#	instead of vfork.
-#
-# Arguments:
-#	none
-#	
-# Results:
-#
-#	Defines some of the following vars:
-#		vfork (=fork)
-#
-#--------------------------------------------------------------------
-
-AC_DEFUN(SC_HAVE_VFORK, [
-    AC_TYPE_SIGNAL()
-    AC_CHECK_FUNC(vfork, tcl_ok=1, tcl_ok=0)
-    if test "$tcl_ok" = 1; then
-	AC_MSG_CHECKING([vfork/signal bug]);
-	AC_TRY_RUN([
-#include <stdio.h>
-#include <signal.h>
-#include <sys/wait.h>
-int gotSignal = 0;
-sigProc(sig)
-    int sig;
-{
-    gotSignal = 1;
-}
-main()
-{
-    int pid, sts;
-    (void) signal(SIGCHLD, sigProc);
-    pid = vfork();
-    if (pid <  0) {
-	exit(1);
-    } else if (pid == 0) {
-	(void) signal(SIGCHLD, SIG_DFL);
-	_exit(0);
-    } else {
-	(void) wait(&sts);
-    }
-    exit((gotSignal) ? 0 : 1);
-}], tcl_ok=1, tcl_ok=0, tcl_ok=0)
-
-	if test "$tcl_ok" = 1; then
-	    AC_MSG_RESULT(ok)
-	else
-	    AC_MSG_RESULT([buggy, using fork instead])
-	fi
-    fi
-    rm -f core
-    if test "$tcl_ok" = 0; then
-	AC_DEFINE(vfork, fork)
-    fi
-])
-
-#--------------------------------------------------------------------
-# SC_TIME_HANLDER
-#
-#	Checks how the system deals with time.h, what time structures
-#	are used on the system, and what fields the structures have.
-#
-# Arguments:
-#	none
-#	
-# Results:
-#
-#	Defines some of the following vars:
-#		USE_DELTA_FOR_TZ
-#		HAVE_TM_GMTOFF
-#		HAVE_TM_TZADJ
-#		HAVE_TIMEZONE_VAR
-#
-#--------------------------------------------------------------------
-
-AC_DEFUN(SC_TIME_HANDLER, [
-    AC_CHECK_HEADERS(sys/time.h)
-    AC_HEADER_TIME
-    AC_STRUCT_TIMEZONE
-
-    AC_MSG_CHECKING([tm_tzadj in struct tm])
-    AC_TRY_COMPILE([#include <time.h>], [struct tm tm; tm.tm_tzadj;],
-	    [AC_DEFINE(HAVE_TM_TZADJ)
-	    AC_MSG_RESULT(yes)],
-	    AC_MSG_RESULT(no))
-
-    AC_MSG_CHECKING([tm_gmtoff in struct tm])
-    AC_TRY_COMPILE([#include <time.h>], [struct tm tm; tm.tm_gmtoff;],
-	    [AC_DEFINE(HAVE_TM_GMTOFF)
-	    AC_MSG_RESULT(yes)],
-	    AC_MSG_RESULT(no))
-
-    #
-    # Its important to include time.h in this check, as some systems
-    # (like convex) have timezone functions, etc.
-    #
-    have_timezone=no
-    AC_MSG_CHECKING([long timezone variable])
-    AC_TRY_COMPILE([#include <time.h>],
-	    [extern long timezone;
-	    timezone += 1;
-	    exit (0);],
-	    [have_timezone=yes
-	    AC_DEFINE(HAVE_TIMEZONE_VAR)
-	    AC_MSG_RESULT(yes)],
-	    AC_MSG_RESULT(no))
-
-    #
-    # On some systems (eg IRIX 6.2), timezone is a time_t and not a long.
-    #
-    if test "$have_timezone" = no; then
-    AC_MSG_CHECKING([time_t timezone variable])
-    AC_TRY_COMPILE([#include <time.h>],
-	    [extern time_t timezone;
-	    timezone += 1;
-	    exit (0);],
-	    [AC_DEFINE(HAVE_TIMEZONE_VAR)
-	    AC_MSG_RESULT(yes)],
-	    AC_MSG_RESULT(no))
-    fi
-
-    #
-    # AIX does not have a timezone field in struct tm. When the AIX bsd
-    # library is used, the timezone global and the gettimeofday methods are
-    # to be avoided for timezone deduction instead, we deduce the timezone
-    # by comparing the localtime result on a known GMT value.
-    #
-
-    if test "`uname -s`" = "AIX" ; then
-	AC_CHECK_LIB(bsd, gettimeofday, libbsd=yes)
-	if test $libbsd = yes; then
-	    AC_DEFINE(USE_DELTA_FOR_TZ)
-	fi
-    fi
-])
-
-#--------------------------------------------------------------------
-# SC_BUGGY_STRTOD
-#
-#	Under Solaris 2.4, strtod returns the wrong value for the
-#	terminating character under some conditions.  Check for this
-#	and if the problem exists use a substitute procedure
-#	"fixstrtod" (provided by Tcl) that corrects the error.
-#
-# Arguments:
-#	none
-#	
-# Results:
-#
-#	Might defines some of the following vars:
-#		strtod (=fixstrtod)
-#
-#--------------------------------------------------------------------
-
-AC_DEFUN(SC_BUGGY_STRTOD, [
-    AC_CHECK_FUNC(strtod, tk_strtod=1, tk_strtod=0)
-    if test "$tk_strtod" = 1; then
-	AC_MSG_CHECKING([for Solaris 2.4 strtod bug])
-	AC_TRY_RUN([
-	    extern double strtod();
-	    int main()
-	    {
-		char *string = "NaN";
-		char *term;
-		strtod(string, &term);
-		if ((term != string) && (term[-1] == 0)) {
-		    exit(1);
-		}
-		exit(0);
-	    }], tk_ok=1, tk_ok=0, tk_ok=0)
-	if test "$tk_ok" = 1; then
-	    AC_MSG_RESULT(ok)
-	else
-	    AC_MSG_RESULT(buggy)
-	    AC_DEFINE(strtod, fixstrtod)
-	fi
-    fi
-])
-
-#--------------------------------------------------------------------
-# SC_TCL_LINK_LIBS
-#
-#	Search for the libraries needed to link the Tcl shell.
-#	Things like the math library (-lm) and socket stuff (-lsocket vs.
-#	-lnsl) are dealt with here.
-#
-# Arguments:
-#	Requires the following vars to be set in the Makefile:
-#		DL_LIBS
-#		LIBS
-#		MATH_LIBS
-#	
-# Results:
-#
-#	Subst's the following var:
-#		TCL_LIBS
-#		MATH_LIBS
-#
-#	Might append to the following vars:
-#		LIBS
-#
-#	Might define the following vars:
-#		HAVE_NET_ERRNO_H
-#
-#--------------------------------------------------------------------
-
-AC_DEFUN(SC_TCL_LINK_LIBS, [
-    #--------------------------------------------------------------------
-    # On a few very rare systems, all of the libm.a stuff is
-    # already in libc.a.  Set compiler flags accordingly.
-    # Also, Linux requires the "ieee" library for math to work
-    # right (and it must appear before "-lm").
-    #--------------------------------------------------------------------
-
-    AC_CHECK_FUNC(sin, MATH_LIBS="", MATH_LIBS="-lm")
-    AC_CHECK_LIB(ieee, main, [MATH_LIBS="-lieee $MATH_LIBS"])
-
-    #--------------------------------------------------------------------
-    # On AIX systems, libbsd.a has to be linked in to support
-    # non-blocking file IO.  This library has to be linked in after
-    # the MATH_LIBS or it breaks the pow() function.  The way to
-    # insure proper sequencing, is to add it to the tail of MATH_LIBS.
-    # This library also supplies gettimeofday.
-    #--------------------------------------------------------------------
-
-    libbsd=no
-    if test "`uname -s`" = "AIX" ; then
-	AC_CHECK_LIB(bsd, gettimeofday, libbsd=yes)
-	if test $libbsd = yes; then
-	    MATH_LIBS="$MATH_LIBS -lbsd"
-	fi
-    fi
-
-
-    #--------------------------------------------------------------------
-    # Interactive UNIX requires -linet instead of -lsocket, plus it
-    # needs net/errno.h to define the socket-related error codes.
-    #--------------------------------------------------------------------
-
-    AC_CHECK_LIB(inet, main, [LIBS="$LIBS -linet"])
-    AC_CHECK_HEADER(net/errno.h, AC_DEFINE(HAVE_NET_ERRNO_H))
-
-    #--------------------------------------------------------------------
-    #	Check for the existence of the -lsocket and -lnsl libraries.
-    #	The order here is important, so that they end up in the right
-    #	order in the command line generated by make.  Here are some
-    #	special considerations:
-    #	1. Use "connect" and "accept" to check for -lsocket, and
-    #	   "gethostbyname" to check for -lnsl.
-    #	2. Use each function name only once:  can't redo a check because
-    #	   autoconf caches the results of the last check and won't redo it.
-    #	3. Use -lnsl and -lsocket only if they supply procedures that
-    #	   aren't already present in the normal libraries.  This is because
-    #	   IRIX 5.2 has libraries, but they aren't needed and they're
-    #	   bogus:  they goof up name resolution if used.
-    #	4. On some SVR4 systems, can't use -lsocket without -lnsl too.
-    #	   To get around this problem, check for both libraries together
-    #	   if -lsocket doesn't work by itself.
-    #--------------------------------------------------------------------
-
-    tcl_checkBoth=0
-    AC_CHECK_FUNC(connect, tcl_checkSocket=0, tcl_checkSocket=1)
-    if test "$tcl_checkSocket" = 1; then
-	AC_CHECK_LIB(socket, main, LIBS="$LIBS -lsocket", tcl_checkBoth=1)
-    fi
-    if test "$tcl_checkBoth" = 1; then
-	tk_oldLibs=$LIBS
-	LIBS="$LIBS -lsocket -lnsl"
-	AC_CHECK_FUNC(accept, tcl_checkNsl=0, [LIBS=$tk_oldLibs])
-    fi
-    AC_CHECK_FUNC(gethostbyname, , AC_CHECK_LIB(nsl, main,
-	    [LIBS="$LIBS -lnsl"]))
-    
-    # Don't perform the eval of the libraries here because DL_LIBS
-    # won't be set until we call SC_CONFIG_CFLAGS
-
-    TCL_LIBS='${DL_LIBS} ${LIBS} ${MATH_LIBS}'
-    AC_SUBST(TCL_LIBS)
-    AC_SUBST(MATH_LIBS)
-])
-
-#------------------------------------------------------------------------
-# SC_MAKE_LIB --
-#
-#	Generate a line that can be used to build a shared/unshared library
-#	in a platform independent manner.
-#
-# Arguments:
-#	none
-#
-#	Requires:
-#
-# Results:
-#
-#	Defines the following vars:
-#		MAKE_LIB	Makefile rule for building a library
-#		MAKE_SHARED_LIB	Makefile rule for building a shared library
-#		MAKE_UNSHARED_LIB	Makefile rule for building a static
-#				library
-#------------------------------------------------------------------------
-
-AC_DEFUN(SC_MAKE_LIB, [
-    case "`uname -s`" in
-	*win32* | *WIN32* | *CYGWIN_NT* |*CYGWIN_98*|*CYGWIN_95*)
-	    if test "${CC-cc}" = "cl"; then
-		MAKE_STATIC_LIB="\${STLIB_LD} -out:\[$]@ \$(\[$]@_OBJECTS) "
-		MAKE_SHARED_LIB="\${SHLIB_LD} \${SHLIB_LDFLAGS} \${SHLIB_LD_LIBS} \$(LDFLAGS) -out:\[$]@ \$(\[$]@_OBJECTS) "
-	    fi
-	    ;;
-	*)
-	    MAKE_STATIC_LIB="\${STLIB_LD} \[$]@ \$(\[$]@_OBJECTS)"
-	    MAKE_SHARED_LIB="\${SHLIB_LD} -o \[$]@ \$(\[$]@_OBJECTS) \${SHLIB_LDFLAGS} \${SHLIB_LD_LIBS}"
-	    ;;
-    esac
-
-    if test "${SHARED_BUILD}" = "1" ; then
-	MAKE_LIB=${MAKE_SHARED_LIB}
-    else
-	MAKE_LIB=${MAKE_STATIC_LIB}
-    fi
-
-    AC_SUBST(MAKE_LIB)
-    AC_SUBST(MAKE_SHARED_LIB)
-    AC_SUBST(MAKE_STATIC_LIB)
-])
-
-#------------------------------------------------------------------------
-# SC_LIB_SPEC --
-#
-#	Compute the name of an existing object library located in libdir
-#	from the given base name and produce the appropriate linker flags.
-#
-# Arguments:
-#	basename	The base name of the library without version
-#			numbers, extensions, or "lib" prefixes.
-#	extra_dir	Extra directory in which to search for the
-#			library.  This location is used first, then
-#			$prefix/$exec-prefix, then some defaults.
-#
-# Requires:
-#	CYGPATH		command used to generate native style paths
-#
-# Results:
-#
-#	Defines the following vars:
-#		${basename}_LIB_NAME	The computed library name.
-#		${basename}_LIB_SPEC	The computed linker flags.
-#------------------------------------------------------------------------
-
-AC_DEFUN(SC_LIB_SPEC, [
-    AC_MSG_CHECKING(for $1 library)
-
-    # Look in exec-prefix and prefix for the library.  If neither of
-    # these were specified, look in libdir.  It doesn't matter if libdir
-    # wasn't specified since a search in the unspecified directory will
-    # fail (NONE/lib)
-
-    if test x"${exec_prefix}" != x"NONE" ; then
-	sc_lib_name_dir="${exec_prefix}/lib"
-    elif test x"${prefix}" != "NONE" ; then
-	sc_lib_name_dir="${prefix}/lib"
-    else
-	eval "sc_lib_name_dir=${libdir}"
-    fi
-
-    if test x"$2" != x ; then
-	sc_extra_lib_dir=$2
-    else
-	sc_extra_lib_dir=NONE
-    fi
-
-    for i in \
-	    `ls -dr ${sc_extra_lib_dir}/$1[[0-9]]*.lib 2>/dev/null ` \
-	    `ls -dr ${sc_extra_lib_dir}/lib$1[[0-9]]* 2>/dev/null ` \
-	    `ls -dr ${sc_lib_name_dir}/$1[[0-9]]*.lib 2>/dev/null ` \
-	    `ls -dr ${sc_lib_name_dir}/lib$1[[0-9]]* 2>/dev/null ` \
-	    `ls -dr /usr/lib/$1[[0-9]]*.lib 2>/dev/null ` \
-	    `ls -dr /usr/lib/lib$1[[0-9]]* 2>/dev/null ` \
-	    `ls -dr /usr/local/lib/$1[[0-9]]*.lib 2>/dev/null ` \
-	    `ls -dr /usr/local/lib/lib$1[[0-9]]* 2>/dev/null ` ; do
-	if test -f "$i" ; then
-
-	    sc_lib_name_dir=`dirname $i`
-	    $1_LIB_NAME=`basename $i`
-	    $1_LIB_PATH_NAME=$i
-	    break
-	fi
-    done
-
-    case "`uname -s`" in
-	*win32* | *WIN32* | *CYGWIN_NT* |*CYGWIN_98*|*CYGWIN_95*)
-	    $1_LIB_SPEC=\"`${CYGPATH} ${$1_LIB_PATH_NAME}`\"
-	    ;;
-	*)
-	    # Strip off the leading "lib" and trailing ".a" or ".so"
-
-	    sc_lib_name_lib=`echo ${$1_LIB_NAME}|sed -e 's/^lib//' -e 's/\.[[^.]]*$//'`
-	    $1_LIB_SPEC="-L${sc_lib_name_dir} -l${sc_lib_name_lib}"
-	    ;;
-    esac
-    if test "x$1_LIB_NAME" = x ; then
-	AC_MSG_ERROR(not found)
-    else
-	AC_MSG_RESULT(${$1_LIB_SPEC})
-    fi
-])
-
-#------------------------------------------------------------------------
-# SC_PRIVATE_TCL_HEADERS --
-#
-#	Locate the private Tcl include files
-#
-# Arguments:
-#
-#	Requires:
-#		TCL_SRC_DIR	Assumes that SC_LOAD_TCLCONFIG has
-#				 already been called.
-#
-# Results:
-#
-#	Substs the following vars:
-#		TCL_TOP_DIR_NATIVE
-#		TCL_GENERIC_DIR_NATIVE
-#		TCL_UNIX_DIR_NATIVE
-#		TCL_WIN_DIR_NATIVE
-#		TCL_BMAP_DIR_NATIVE
-#		TCL_TOOL_DIR_NATIVE
-#		TCL_PLATFORM_DIR_NATIVE
-#		TCL_BIN_DIR_NATIVE
-#		TCL_INCLUDES
-#------------------------------------------------------------------------
-
-AC_DEFUN(SC_PRIVATE_TCL_HEADERS, [
-    AC_MSG_CHECKING(for Tcl private include files)
-
-    case "`uname -s`" in
-	*win32* | *WIN32* | *CYGWIN_NT* |*CYGWIN_98*|*CYGWIN_95*)
-	    TCL_TOP_DIR_NATIVE=\"`${CYGPATH} ${TCL_SRC_DIR}/..`\"
-	    TCL_GENERIC_DIR_NATIVE=\"`${CYGPATH} ${TCL_SRC_DIR}/../generic`\"
-	    TCL_UNIX_DIR_NATIVE=\"`${CYGPATH} ${TCL_SRC_DIR}/../unix`\"
-	    TCL_WIN_DIR_NATIVE=\"`${CYGPATH} ${TCL_SRC_DIR}/../win`\"
-	    TCL_BMAP_DIR_NATIVE=\"`${CYGPATH} ${TCL_SRC_DIR}/../bitmaps`\"
-	    TCL_TOOL_DIR_NATIVE=\"`${CYGPATH} ${TCL_SRC_DIR}/../tools`\"
-	    TCL_COMPAT_DIR_NATIVE=\"`${CYGPATH} ${TCL_SRC_DIR}/../compat`\"
-	    TCL_PLATFORM_DIR_NATIVE=${TCL_WIN_DIR_NATIVE}
-	;;
-	*)
-	    TCL_TOP_DIR_NATIVE='$(TCL_SRC_DIR)'
-	    TCL_GENERIC_DIR_NATIVE='$(TCL_TOP_DIR_NATIVE)/generic'
-	    TCL_UNIX_DIR_NATIVE='$(TCL_TOP_DIR_NATIVE)/unix'
-	    TCL_WIN_DIR_NATIVE='$(TCL_TOP_DIR_NATIVE)/win'
-	    TCL_BMAP_DIR_NATIVE='$(TCL_TOP_DIR_NATIVE)/bitmaps'
-	    TCL_TOOL_DIR_NATIVE='$(TCL_TOP_DIR_NATIVE)/tools'
-	    TCL_COMPAT_DIR_NATIVE='$(TCL_TOP_DIR_NATIVE)/compat'
-	    TCL_PLATFORM_DIR_NATIVE=${TCL_UNIX_DIR_NATIVE}
-	;;
-    esac
-
-    AC_SUBST(TCL_TOP_DIR_NATIVE)
-    AC_SUBST(TCL_GENERIC_DIR_NATIVE)
-    AC_SUBST(TCL_UNIX_DIR_NATIVE)
-    AC_SUBST(TCL_WIN_DIR_NATIVE)
-    AC_SUBST(TCL_BMAP_DIR_NATIVE)
-    AC_SUBST(TCL_TOOL_DIR_NATIVE)
-    AC_SUBST(TCL_PLATFORM_DIR_NATIVE)
-
-    TCL_INCLUDES="-I${TCL_GENERIC_DIR_NATIVE} -I${TCL_PLATFORM_DIR_NATIVE}"
-    AC_SUBST(TCL_INCLUDES)
-    AC_MSG_RESULT(Using srcdir found in tclConfig.sh)
-])
-
-#------------------------------------------------------------------------
-# SC_PUBLIC_TCL_HEADERS --
-#
-#	Locate the installed public Tcl header files
-#
-# Arguments:
-#	None.
-#
-# Requires:
-#	CYGPATH must be set
-#
-# Results:
-#
-#	Adds a --with-tclinclude switch to configure.
-#	Result is cached.
-#
-#	Substs the following vars:
-#		TCL_INCLUDES
-#------------------------------------------------------------------------
-
-AC_DEFUN(SC_PUBLIC_TCL_HEADERS, [
-    AC_MSG_CHECKING(for Tcl public headers)
-
-    AC_ARG_WITH(tclinclude, [ --with-tclinclude      directory containing the public Tcl header files.], with_tclinclude=${withval})
-
-    if test x"${with_tclinclude}" != x ; then
-	if test -f "${with_tclinclude}/tcl.h" ; then
-	    ac_cv_c_tclh=${with_tclinclude}
-	else
-	    AC_MSG_ERROR([${with_tclinclude} directory does not contain Tcl public header file tcl.h])
-	fi
-    else
-	AC_CACHE_VAL(ac_cv_c_tclh, [
-	    # Use the value from --with-tclinclude, if it was given
-
-	    if test x"${with_tclinclude}" != x ; then
-		ac_cv_c_tclh=${with_tclinclude}
-	    else
-		# Check in the includedir, if --prefix was specified
-
-		eval "temp_includedir=${includedir}"
-		for i in \
-			`ls -d ${temp_includedir} 2>/dev/null` \
-			/usr/local/include /usr/include ; do
-		    if test -f "$i/tcl.h" ; then
-			ac_cv_c_tclh=$i
-			break
-		    fi
-		done
-	    fi
-	])
-    fi
-
-    # Print a message based on how we determined the include path
-
-    if test x"${ac_cv_c_tclh}" = x ; then
-	AC_MSG_ERROR(tcl.h not found.  Please specify its location with --with-tclinclude)
-    else
-	AC_MSG_RESULT(${ac_cv_c_tclh})
-    fi
-
-    # Convert to a native path and substitute into the output files.
-
-    INCLUDE_DIR_NATIVE=`${CYGPATH} ${ac_cv_c_tclh}`
-
-    TCL_INCLUDES=-I\"${INCLUDE_DIR_NATIVE}\"
-
-    AC_SUBST(TCL_INCLUDES)
-])
-
-#------------------------------------------------------------------------
-# SC_PRIVATE_TK_HEADERS --
-#
-#	Locate the private Tk include files
-#
-# Arguments:
-#
-#	Requires:
-#		TK_SRC_DIR	Assumes that SC_LOAD_TKCONFIG has
-#				 already been called.
-#
-# Results:
-#
-#	Substs the following vars:
-#		TK_INCLUDES
-#------------------------------------------------------------------------
-
-AC_DEFUN(SC_PRIVATE_TK_HEADERS, [
-    AC_MSG_CHECKING(for Tk private include files)
-
-    case "`uname -s`" in
-	*win32* | *WIN32* | *CYGWIN_NT* |*CYGWIN_98*|*CYGWIN_95*)
-	    TK_UNIX_DIR_NATIVE=\"`${CYGPATH} ${TK_SRC_DIR}/../unix`\"
-	    TK_WIN_DIR_NATIVE=\"`${CYGPATH} ${TK_SRC_DIR}/../win`\"
-	    TK_GENERIC_DIR_NATIVE=\"`${CYGPATH} ${TK_SRC_DIR}/../generic`\"
-	    TK_XLIB_DIR_NATIVE=\"`${CYGPATH} ${TK_SRC_DIR}/../xlib`\"
-	    TK_PLATFORM_DIR_NATIVE=${TK_WIN_DIR_NATIVE}
-
-	    TK_INCLUDES="-I${TK_GENERIC_DIR_NATIVE} -I${TK_PLATFORM_DIR_NATIVE} -I${TK_XLIB_DIR_NATIVE}"
-	;;
-	*)
-	    TK_GENERIC_DIR_NATIVE='$(TK_TOP_DIR_NATIVE)/generic'
-	    TK_UNIX_DIR_NATIVE='$(TK_TOP_DIR_NATIVE)/unix'
-	    TK_WIN_DIR_NATIVE='$(TK_TOP_DIR_NATIVE)/win'
-	    TK_PLATFORM_DIR_NATIVE=${TK_UNIX_DIR_NATIVE}
-
-	    TK_INCLUDES="-I${TK_GENERIC_DIR_NATIVE} -I${TK_PLATFORM_DIR_NATIVE}"
-	;;
-    esac
-
-    AC_SUBST(TK_UNIX_DIR_NATIVE)
-    AC_SUBST(TK_WIN_DIR_NATIVE)
-    AC_SUBST(TK_GENERIC_DIR_NATIVE)
-    AC_SUBST(TK_XLIB_DIR_NATIVE)
-    AC_SUBST(TK_PLATFORM_DIR_NATIVE)
-
-    AC_SUBST(TK_INCLUDES)
-    AC_MSG_RESULT(Using srcdir found in tkConfig.sh)
-])
-
-#------------------------------------------------------------------------
-# SC_PUBLIC_TK_HEADERS --
-#
-#	Locate the installed public Tk header files
-#
-# Arguments:
-#	None.
-#
-# Requires:
-#	CYGPATH must be set
-#
-# Results:
-#
-#	Adds a --with-tkinclude switch to configure.
-#	Result is cached.
-#
-#	Substs the following vars:
-#		TK_INCLUDES
-#------------------------------------------------------------------------
-
-AC_DEFUN(SC_PUBLIC_TK_HEADERS, [
-    AC_MSG_CHECKING(for Tk public headers)
-
-    AC_ARG_WITH(tkinclude, [ --with-tkinclude      directory containing the public Tk header files.], with_tkinclude=${withval})
-
-    if test x"${with_tkinclude}" != x ; then
-	if test -f "${with_tkinclude}/tk.h" ; then
-	    ac_cv_c_tkh=${with_tkinclude}
-	else
-	    AC_MSG_ERROR([${with_tkinclude} directory does not contain Tk public header file tk.h])
-	fi
-    else
-	AC_CACHE_VAL(ac_cv_c_tkh, [
-	    # Use the value from --with-tkinclude, if it was given
-
-	    if test x"${with_tkinclude}" != x ; then
-		ac_cv_c_tkh=${with_tkinclude}
-	    else
-		# Check in the includedir, if --prefix was specified
-
-		eval "temp_includedir=${includedir}"
-		for i in \
-			`ls -d ${temp_includedir} 2>/dev/null` \
-			/usr/local/include /usr/include ; do
-		    if test -f "$i/tk.h" ; then
-			ac_cv_c_tkh=$i
-			break
-		    fi
-		done
-	    fi
-	])
-    fi
-
-    # Print a message based on how we determined the include path
-
-    if test x"${ac_cv_c_tkh}" = x ; then
-	AC_MSG_ERROR(tk.h not found.  Please specify its location with --with-tkinclude)
-    else
-	AC_MSG_RESULT(${ac_cv_c_tkh})
-    fi
-
-    # Convert to a native path and substitute into the output files.
-
-    INCLUDE_DIR_NATIVE=`${CYGPATH} ${ac_cv_c_tkh}`
-
-    TK_INCLUDES=-I\"${INCLUDE_DIR_NATIVE}\"
-
-    AC_SUBST(TK_INCLUDES)
-])
-
-#------------------------------------------------------------------------
-# SC_SIMPLE_EXEEXT
-#	Select the executable extension based on the host type.  This
-#	is a lightweight replacement for AC_EXEEXT that doesn't require
-#	a compiler.
-#
-# Arguments
-#	none
-#
-# Results
-#	Subst's the following values:
-#		EXEEXT
-#------------------------------------------------------------------------
-
-AC_DEFUN(SC_SIMPLE_EXEEXT, [
-    AC_MSG_CHECKING(executable extension based on host type)
-
-    case "`uname -s`" in
-	*win32* | *WIN32* | *CYGWIN_NT* |*CYGWIN_98*|*CYGWIN_95*)
-	    EXEEXT=".exe"
-	;;
-	*)
-	    EXEEXT=""
-	;;
-    esac
-
-    AC_MSG_RESULT(${EXEEXT})
-    AC_SUBST(EXEEXT)
-])
-
-#------------------------------------------------------------------------
-# SC_PROG_TCLSH
-#	Locate a tclsh shell in the following directories:
-#		${exec_prefix}/bin
-#		${prefix}/bin
-#		${TCL_BIN_DIR}
-#		${TCL_BIN_DIR}/../bin
-#		${PATH}
-#
-# Arguments
-#	none
-#
-# Results
-#	Subst's the following values:
-#		TCLSH_PROG
-#------------------------------------------------------------------------
-
-AC_DEFUN(SC_PROG_TCLSH, [
-    AC_MSG_CHECKING([for tclsh])
-
-    AC_CACHE_VAL(ac_cv_path_tclsh, [
-	search_path=`echo ${exec_prefix}/bin:${prefix}/bin:${TCL_BIN_DIR}:${TCL_BIN_DIR}/../bin:${PATH} | sed -e 's/:/ /g'`
-	for dir in $search_path ; do
-	    for j in `ls -r $dir/tclsh[[8-9]]*${EXEEXT} 2> /dev/null` \
-		    `ls -r $dir/tclsh*${EXEEXT} 2> /dev/null` ; do
-		if test x"$ac_cv_path_tclsh" = x ; then
-		    if test -f "$j" ; then
-			ac_cv_path_tclsh=$j
-			break
-		    fi
-		fi
-	    done
-	done
-    ])
-
-    if test -f "$ac_cv_path_tclsh" ; then
-	TCLSH_PROG=$ac_cv_path_tclsh
-	AC_MSG_RESULT($TCLSH_PROG)
-    else
-	AC_MSG_ERROR(No tclsh found in PATH:  $search_path)
-    fi
-    AC_SUBST(TCLSH_PROG)
-])
-
-#------------------------------------------------------------------------
-# SC_PROG_WISH
-#	Locate a wish shell in the following directories:
-#		${exec_prefix}/bin
-#		${prefix}/bin
-#		${TCL_BIN_DIR}
-#		${TCL_BIN_DIR}/../bin
-#		${PATH}
-#
-# Arguments
-#	none
-#
-# Results
-#	Subst's the following values:
-#		WISH_PROG
-#------------------------------------------------------------------------
-
-AC_DEFUN(SC_PROG_WISH, [
-    AC_MSG_CHECKING([for wish])
-
-    AC_CACHE_VAL(ac_cv_path_wish, [
-	search_path=`echo ${exec_prefix}/bin:${prefix}/bin:${TCL_BIN_DIR}:${TCL_BIN_DIR}/../bin:${PATH} | sed -e 's/:/ /g'`
-	for dir in $search_path ; do
-	    for j in `ls -r $dir/wish[[8-9]]*${EXEEXT} 2> /dev/null` \
-		    `ls -r $dir/wish*${EXEEXT} 2> /dev/null` ; do
-		if test x"$ac_cv_path_wish" = x ; then
-		    if test -f "$j" ; then
-			ac_cv_path_wish=$j
-			break
-		    fi
-		fi
-	    done
-	done
-    ])
-
-    if test -f "$ac_cv_path_wish" ; then
-	WISH_PROG=$ac_cv_path_wish
-	AC_MSG_RESULT($WISH_PROG)
-    else
-	AC_MSG_ERROR(No wish found in PATH:  $search_path)
-    fi
-    AC_SUBST(WISH_PROG)
-])
-