# Commands tested in this file: socket.
#
# This file contains a collection of tests for one or more of the Tcl
# built-in commands.  Sourcing this file into Tcl runs the tests and
# generates output for errors.  No output means no errors were found.
#
# Copyright (c) 1994-1996 Sun Microsystems, Inc.
# Copyright (c) 1998-2000 Ajuba Solutions. 
#
# See the file "license.terms" for information on usage and redistribution
# of this file, and for a DISCLAIMER OF ALL WARRANTIES.
#
# RCS: @(#) $Id: tlsIO.test,v 1.9 2000/06/06 01:50:36 aborr Exp $
# RCS: @(#) $Id: tlsIO.test,v 1.10 2000/06/06 22:00:48 aborr Exp $

# Running socket tests with a remote server:
# ------------------------------------------
# 
# Some tests in socket.test depend on the existence of a remote server to
# which they connect. The remote server must be an instance of tcltest and it
# must run the script found in the file "remote.tcl" in this directory. You
# can start the remote server on any machine reachable from the machine on
# which you want to run the socket tests, by issuing:
# 
#     tcltest remote.tcl -port 2048	# Or choose another port number.
#     tcltest remote.tcl -port 8048	# Or choose another port number.
# 
# If the machine you are running the remote server on has several IP
# interfaces, you can choose which interface the server listens on for
# connections by specifying the -address command line flag, so:
# 
#     tcltest remote.tcl -address your.machine.com
# 
# These options can also be set by environment variables. On Unix, you can
# type these commands to the shell from which the remote server is started:
# 
#     shell% setenv serverPort 2048
#     shell% setenv serverPort 8048
#     shell% setenv serverAddress your.machine.com
# 
# and subsequently you can start the remote server with:
# 
#     tcltest remote.tcl
# 
# to have it listen on port 2048 on the interface your.machine.com.
# to have it listen on port 8048 on the interface your.machine.com.
#     
# When the server starts, it prints out a detailed message containing its
# configuration information, and it will block until killed with a Ctrl-C.
# Once the remote server exists, you can run the tests in socket.test with
# the server by setting two Tcl variables:
# 
#     % set remoteServerIP <name or address of machine on which server runs>
#     % set remoteServerPort 2048
#     % set remoteServerPort 8048
# 
# These variables are also settable from the environment. On Unix, you can:
# 
#     shell% setenv remoteServerIP machine.where.server.runs
#     shell% senetv remoteServerPort 2048
#     shell% senetv remoteServerPort 8048
# 
# The preamble of the socket.test file checks to see if the variables are set
# either in Tcl or in the environment; if they are, it attempts to connect to
# the server. If the connection is successful, the tests using the remote
# server will be performed; otherwise, it will attempt to start the remote
# server (via exec) on platforms that support this, on the local host,
# listening at port 2048. If all fails, a message is printed and the tests
# listening at port 8048. If all fails, a message is printed and the tests
# using the remote server are not performed.

if {[lsearch [namespace children] ::tcltest] == -1} {
    package require tcltest
    namespace import -force ::tcltest::*
}

# Load the tls package

package require tls

set tlsServerPort 8048

set certsDir [file join [file dirname [info script]] certs] 

set serverCert [file join $certsDir server.pem]
set clientCert [file join $certsDir client.pem]
set caCert [file join $certsDir cacert.pem]
set serverKey [file join $certsDir skey.pem]

    }
}
if {![info exists remoteServerPort]} {
    if {[info exists env(remoteServerPort)]} {
	set remoteServerPort $env(remoteServerPort)
    } else {
        if {[info exists remoteServerIP]} {
	    set remoteServerPort 2048
	    set remoteServerPort $tlsServerPort
        }
    }
}

#
# Check if we're supposed to do tests against the remote server
#

set doTestsWithRemoteServer 1
if {![info exists remoteServerIP] && ($tcl_platform(platform) != "macintosh")} {
    set remoteServerIP 127.0.0.1
}
if {($doTestsWithRemoteServer == 1) && (![info exists remoteServerPort])} {
    set remoteServerPort 2048
    set remoteServerPort $tlsServerPort
}

# Attempt to connect to a remote server if one is already running. If it
# is not running or for some other reason the connect fails, attempt to
# start the remote server on the local host listening on port 2048. This
# start the remote server on the local host listening on port 8048. This
# is only done on platforms that support exec (i.e. not on the Mac). On
# platforms that do not support exec, the remote server must be started
# by the user before running the tests.

set remoteProcChan ""
set commandSocket ""
if {$doTestsWithRemoteServer} {

test tlsIO-2.1 {tcp connection} {socket stdio} {
    removeFile script
    set f [open script w]
    puts $f {
    	package require tls
	set timer [after 2000 "set x timed_out"]
    }
    puts $f "set f \[tls::socket -server accept -certfile $serverCert -cafile $caCert -keyfile $serverKey 2828 \]"
    puts $f "set f \[tls::socket -server accept -certfile $serverCert -cafile $caCert -keyfile $serverKey $tlsServerPort \]"
    puts $f {
	proc accept {file addr port} {
	    global x
	    set x done
            close $file
	}
	puts ready
	vwait x
	after cancel $timer
	close $f
	puts $x
    }
    close $f
    set f [open "|[list $::tcltest::tcltest script]" r]
    gets $f x
    if {[catch {tls::socket -certfile $clientCert -cafile $caCert \
	-keyfile $clientKey 127.0.0.1 2828} msg]} {
	-keyfile $clientKey 127.0.0.1 $tlsServerPort msg]} {
        set x $msg
    } else {
        lappend x [gets $f]
        close $msg
    }
    lappend x [gets $f]
    close $f
    set x
} {ready done {}}

if [info exists port] {
    incr port
} else { 
    set port [expr 2048 + [pid]%1024]
    set port [expr $tlsServerPort + [pid]%1024]
}

test tlsIO-2.2 {tcp connection with client port specified} {socket stdio} {
    removeFile script
    set f [open script w]
    puts $f {
	package require tls
	set timer [after 2000 "set x done"]
    }
    puts $f "set f \[tls::socket -server accept -certfile $serverCert -cafile $caCert -keyfile $serverKey 2829 \]"
    puts $f "set f \[tls::socket -server accept -certfile $serverCert -cafile $caCert -keyfile $serverKey 8829 \]"
    puts $f {
	proc accept {file addr port} {
            global x
            puts "[gets $file] $port"
            close $file
            set x done
	}
	puts ready
	vwait x
	after cancel $timer
	close $f
    }
    close $f
    set f [open "|[list $::tcltest::tcltest script]" r]
    gets $f x
    global port
    if {[catch {tls::socket -myport $port \
	-certfile $clientCert -cafile $caCert \
	-keyfile $clientKey 127.0.0.1 2829} sock]} {
	-keyfile $clientKey 127.0.0.1 8829} sock]} {
        set x $sock
	catch {close [tls::socket 127.0.0.1 2829]}
	catch {close [tls::socket 127.0.0.1 8829]}
    } else {
        puts $sock hello
	flush $sock
        lappend x [gets $f]
        close $sock
    }
    close $f
    set x
} [list ready "hello $port"]

test tlsIO-2.3 {tcp connection with client interface specified} {socket stdio} {
    removeFile script
    set f [open script w]
    puts $f {
	package require tls
	set timer [after 2000 "set x done"]
    }
    puts $f "set f \[tls::socket -server accept -certfile $serverCert -cafile $caCert -keyfile $serverKey 2830 \]"
    puts $f "set f \[tls::socket -server accept -certfile $serverCert -cafile $caCert -keyfile $serverKey 8830 \]"
    puts $f {
	proc accept {file addr port} {
            global x
            puts "[gets $file] $addr"
            close $file
            set x done
	}
	puts ready
	vwait x
	after cancel $timer
	close $f
    }
    close $f
    set f [open "|[list $::tcltest::tcltest script]" r]
    gets $f x
    if {[catch {tls::socket -myaddr 127.0.0.1 \
	-certfile $clientCert -cafile $caCert \
	-keyfile $clientKey 127.0.0.1 2830} sock]} {
	-keyfile $clientKey 127.0.0.1 8830} sock]} {
        set x $sock
    } else {
        puts $sock hello
	catch {flush $sock}
        lappend x [gets $f]
        close $sock
    }
    close $f
    set x
} {ready {hello 127.0.0.1}}

test tlsIO-2.4 {tcp connection with server interface specified} {socket stdio} {
    removeFile script
    set f [open script w]
    puts $f {
	package require tls
	set timer [after 2000 "set x done"]
    }
    puts $f "set f \[tls::socket -server accept -certfile $serverCert -cafile $caCert -keyfile $serverKey -myaddr [info hostname] 2831 \]"
    puts $f "set f \[tls::socket -server accept -certfile $serverCert -cafile $caCert -keyfile $serverKey -myaddr [info hostname] 8831 \]"
    puts $f {
	proc accept {file addr port} {
            global x
            puts "[gets $file]"
            close $file
            set x done
	}
	puts ready
	vwait x
	after cancel $timer
	close $f
    }
    close $f
    set f [open "|[list $::tcltest::tcltest script]" r]
    gets $f x
    if {[catch {tls::socket -certfile $clientCert -cafile $caCert \
	-keyfile $clientKey [info hostname] 2831} sock]} {
	-keyfile $clientKey [info hostname] 8831} sock]} {
        set x $sock
    } else {
        puts $sock hello
	flush $sock
        lappend x [gets $f]
        close $sock
    }
    close $f
    set x
} {ready hello}

test tlsIO-2.5 {tcp connection with redundant server port} {socket stdio} {
    removeFile script
    set f [open script w]
    puts $f {
	package require tls
	set timer [after 2000 "set x done"]
    }
    puts $f "set f \[tls::socket -server accept -certfile $serverCert -cafile $caCert -keyfile $serverKey 2832 \]"
    puts $f "set f \[tls::socket -server accept -certfile $serverCert -cafile $caCert -keyfile $serverKey 8832 \]"
    puts $f {
	proc accept {file addr port} {
            global x
            puts "[gets $file]"
            close $file
            set x done
	}
	puts ready
	vwait x
	after cancel $timer
	close $f
    }
    close $f
    set f [open "|[list $::tcltest::tcltest script]" r]
    gets $f x
    if {[catch {tls::socket -certfile $clientCert -cafile $caCert \
	-keyfile $clientKey 127.0.0.1 2832} sock]} {
	-keyfile $clientKey 127.0.0.1 8832} sock]} {
        set x $sock
    } else {
        puts $sock hello
	flush $sock
        lappend x [gets $f]
        close $sock
    }
    close $f
    set x
} {ready hello}
test tlsIO-2.6 {tcp connection} {socket} {
    set status ok
    if {![catch {set sock [tls::socket 127.0.0.1 2833]}]} {
    if {![catch {set sock [tls::socket 127.0.0.1 8833]}]} {
	if {![catch {gets $sock}]} {
	    set status broken
	}
	close $sock
    }
    set status
} ok

test tlsIO-2.7 {echo server, one line} {socket stdio} {
    removeFile script
    set f [open script w]
    puts $f {
	package require tls
	set timer [after 2000 "set x done"]
    }
    puts $f "set f \[tls::socket -server accept -certfile $serverCert -cafile $caCert -keyfile $serverKey 2834 \]"
    puts $f "set f \[tls::socket -server accept -certfile $serverCert -cafile $caCert -keyfile $serverKey 8834 \]"
    puts $f {
	proc accept {s a p} {
            fileevent $s readable [list echo $s]
	    fconfigure $s -translation lf -buffering line
        }
	proc echo {s} {
	     set l [gets $s]

	close $f
	puts done
    }
    close $f
    set f [open "|[list $::tcltest::tcltest script]" r]
    gets $f
    set s [tls::socket -certfile $clientCert -cafile $caCert \
	-keyfile $clientKey 127.0.0.1 2834]
	-keyfile $clientKey 127.0.0.1 8834]
    fconfigure $s -buffering line -translation lf
    puts $s "hello abcdefghijklmnop"
    after 1000
    set x [gets $s]
    close $s
    set y [gets $f]
    close $f
    list $x $y
} {{hello abcdefghijklmnop} done}

test tlsIO-2.8 {echo server, loop 50 times, single connection} {socket stdio} {
    set f [open script w]
    puts $f {
    	package require tls
    }
    puts $f "set f \[tls::socket -server accept -certfile $serverCert -cafile $caCert -keyfile $serverKey 2835 \]"
    puts $f "set f \[tls::socket -server accept -certfile $serverCert -cafile $caCert -keyfile $serverKey 8835 \]"
    puts $f {
	proc accept {s a p} {
            fileevent $s readable [list echo $s]
            fconfigure $s -buffering line
        }
	proc echo {s} {
	     global i

	close $f
	puts "done $i"
    }
    close $f
    set f [open "|[list $::tcltest::tcltest script]" r]
    gets $f
    set s [tls::socket -certfile $clientCert -cafile $caCert \
	-keyfile $clientKey 127.0.0.1 2835]
	-keyfile $clientKey 127.0.0.1 8835]
    fconfigure $s -buffering line
    catch {
	for {set x 0} {$x < 50} {incr x} {
	    puts $s "hello abcdefghijklmnop"
	    gets $s
	}
    }
    close $s
    catch {set x [gets $f]}
    close $f
    set x
} {done 50}

test tlsIO-2.9 {socket conflict} {socket stdio} {
    set s [tls::socket -server accept 2828]
    set s [tls::socket -server accept 8828]
    removeFile script
    set f [open script w]
    puts -nonewline $f {package require tls; tls::socket -server accept 2828}
    puts -nonewline $f {package require tls; tls::socket -server accept 8828}
    close $f
    set f [open "|[list $::tcltest::tcltest script]" r]
    gets $f
    after 100
    set x [list [catch {close $f} msg] $msg]
    close $s
    set x
} {1 {couldn't open socket: address already in use
    while executing
"::socket -server {tls::_accept {-server 1} accept} 2828"
"::socket -server {tls::_accept {-server 1} accept} 8828"
    ("eval" body line 1)
    invoked from within
"eval ::socket $sopts"
    (procedure "tls::socket" line 62)
    invoked from within
"tls::socket -server accept 2828"
"tls::socket -server accept 8828"
    (file "script" line 1)}}

test tlsIO-2.10 {close on accept, accepted socket lives} {socket knownBug} {
    set done 0
    set timer [after 20000 "set done timed_out"]
    set ss [tls::socket -server accept -certfile $serverCert -cafile $caCert \
	-keyfile $serverKey 2830]
	-keyfile $serverKey 8830]
    proc accept {s a p} {
	global ss
	close $ss
	fileevent $s readable "readit $s"
	fconfigure $s -trans lf
    }
    proc readit {s} {
	global done
	gets $s
	close $s
	set done 1
    }
    set cs [tls::socket -certfile $clientCert -cafile $caCert \
	-keyfile $clientKey [info hostname] 2830]
	-keyfile $clientKey [info hostname] 8830]
    close $cs

    vwait done
    after cancel $timer
    set done
} 1

test tlsIO-2.11 {detecting new data} {socket knownBug} {
    proc accept {s a p} {
	global sock
	set sock $s
	set f [open awb.log w]
	puts $f [catch {tls::handshake $sock} err]
	puts $f "err: $err"
	puts $f "[tls::status $sock]"
	close $s
    }

    set s [tls::socket -require 0 -request 0 -server accept -certfile $serverCert -cafile $caCert \
	-keyfile $serverKey 2400]
	-keyfile $serverKey 8400]
    set sock ""
    set s2 [tls::socket -certfile $clientCert -cafile $caCert \
	-keyfile $clientKey 127.0.0.1 2400]
	-keyfile $clientKey 127.0.0.1 8400]
    vwait sock
    puts $s2 one
    flush $s2
    after 500
    fconfigure $sock -blocking 0
    set result [gets $sock]
    lappend result [gets $sock]

test tlsIO-2.12 {tcp connection; no certificates specified} {socket stdio pcCrash} {
    removeFile script
    set f [open script w]
    puts $f {
    	package require tls
	set timer [after 2000 "set x timed_out"]
	set f [tls::socket -server accept 2828]
	set f [tls::socket -server accept 8828]
	proc accept {file addr port} {
	    global x
	    set x done
            close $file
	}
	puts ready
	vwait x
	after cancel $timer
	close $f
	puts $x
    }
    close $f
    set f [open "|[list $::tcltest::tcltest script]" r]
    gets $f x
    if {[catch {tls::socket 127.0.0.1 2828} msg]} {
    if {[catch {tls::socket 127.0.0.1 8828} msg]} {
        set x $msg
    } else {
        lappend x [gets $f]
        close $msg
    }
    lappend x [gets $f]
    close $f
    set x
} {ready done {}}

test tlsIO-3.1 {socket conflict} {socket stdio} {
    removeFile script
    set f [open script w]
    puts $f {
    	package require tls
    }
    puts $f "set f \[tls::socket -server accept -certfile $serverCert -cafile $caCert -keyfile $serverKey 2828 \]"
    puts $f "set f \[tls::socket -server accept -certfile $serverCert -cafile $caCert -keyfile $serverKey 8828 \]"
    puts $f {
	puts ready
	gets stdin
	close $f
    }
    close $f
    set f [open "|[list $::tcltest::tcltest script]" r+]
    gets $f
    set x [list [catch {tls::socket \
	    -certfile $clientCert -cafile $caCert -keyfile $clientKey \
    	-server accept 2828} msg] \
    	-server accept 8828} msg] \
		$msg]
    puts $f bye
    close $f
    set x
} {1 {couldn't open socket: address already in use}}

test tlsIO-3.2 {server with several clients} {socket stdio} {
    removeFile script
    set f [open script w]
    puts $f {
    	package require tls
	set t1 [after 30000 "set x timed_out"]
	set t2 [after 31000 "set x timed_out"]
	set t3 [after 32000 "set x timed_out"]
	set counter 0
    }
    puts $f "set s \[tls::socket -server accept -certfile $serverCert -cafile $caCert -keyfile $serverKey 2828 \]"
    puts $f "set s \[tls::socket -server accept -certfile $serverCert -cafile $caCert -keyfile $serverKey 8828 \]"
    puts $f {
	proc accept {s a p} {
	    fileevent $s readable [list echo $s]
	    fconfigure $s -buffering line
	}
	proc echo {s} {
	     global x

	puts $x
    }
    close $f
    set f [open "|[list $::tcltest::tcltest script]" r+]
    set x [gets $f]
    set s1 [tls::socket \
	    -certfile $clientCert -cafile $caCert -keyfile $clientKey \
	    127.0.0.1 2828]
	    127.0.0.1 8828]
    fconfigure $s1 -buffering line
    set s2 [tls::socket \
	    -certfile $clientCert -cafile $caCert -keyfile $clientKey \
	    127.0.0.1 2828]
	    127.0.0.1 8828]
    fconfigure $s2 -buffering line
    set s3 [tls::socket \
	    -certfile $clientCert -cafile $caCert -keyfile $clientKey \
	    127.0.0.1 2828]
	    127.0.0.1 8828]
    fconfigure $s3 -buffering line
    for {set i 0} {$i < 100} {incr i} {
	puts $s1 hello,s1
	gets $s1
	puts $s2 hello,s2
	gets $s2
	puts $s3 hello,s3

test tlsIO-4.1 {server with several clients} {socket stdio} {
    removeFile script
    set f [open script w]
    puts $f {
    	package require tls
	gets stdin
    }
    puts $f "set s \[tls::socket -certfile $clientCert -cafile $caCert -keyfile $clientKey 127.0.0.1 2828 \]"
    puts $f "set s \[tls::socket -certfile $clientCert -cafile $caCert -keyfile $clientKey 127.0.0.1 8828 \]"
    puts $f {
	fconfigure $s -buffering line
	for {set i 0} {$i < 100} {incr i} {
	    puts $s hello
	    gets $s
	}
	close $s

        }
    }
    set t1 [after 30000 "set x timed_out"]
    set t2 [after 31000 "set x timed_out"]
    set t3 [after 32000 "set x timed_out"]
    set s [tls::socket \
	    -certfile $serverCert -cafile $caCert -keyfile $serverKey \
    	-server accept 2828]
    	-server accept 8828]
    puts $p1 open
    puts $p2 open
    puts $p3 open
    vwait x
    vwait x
    vwait x
    after cancel $t1

test tlsIO-6.1 {accept callback error} {unexplainedFailure socket stdio pcCrash} {
    removeFile script
    set f [open script w]
    puts $f {
    	package require tls
	gets stdin
	tls::socket 127.0.0.1 2848
	tls::socket 127.0.0.1 8848
    }
    close $f
    set f [open "|[list $::tcltest::tcltest script]" r+]
    proc bgerror args {
	global x
	set x $args
    }
    proc accept {s a p} {expr 10 / 0}
    set s [tls::socket -server accept 2848]
    set s [tls::socket -server accept 8848]
    puts $f hello
    close $f
    set timer [after 10000 "set x timed_out"]
    vwait x
    after cancel $timer
    close $s
    rename bgerror {}
    set x
} {{divide by zero}}

# bug report #5812 fconfigure doesn't return value for '-peername'

test tlsIO-7.1 {testing socket specific options} {knownBug socket stdio} {
    removeFile script
    set f [open script w]
    puts $f {
	package require tls
    }
    puts $f "tls::socket -server accept -certfile $serverCert -cafile $caCert -keyfile $serverKey 2820"
    puts $f "tls::socket -server accept -certfile $serverCert -cafile $caCert -keyfile $serverKey 8820"
    puts $f {
	proc accept args {
	    global x
	    set x done
	}
	puts ready
	set timer [after 10000 "set x timed_out"]
	vwait x
	after cancel $timer
    }
    close $f
    set f [open "|[list $::tcltest::tcltest script]" r]
    gets $f
    set s [tls::socket \
	    -certfile $clientCert -cafile $caCert -keyfile $clientKey \
	    127.0.0.1 2820]
	    127.0.0.1 8820]
    set p [fconfigure $s -peername]
    close $s
    close $f
    set l ""
    lappend l [string compare [lindex $p 0] 127.0.0.1]
    lappend l [string compare [lindex $p 2] 2820]
    lappend l [string compare [lindex $p 2] 8820]
    lappend l [llength $p]
} {0 0 3}

# bug report #5812 fconfigure doesn't return value for '-sockname'

test tlsIO-7.2 {testing socket specific options} {knownBug socket stdio} {
    removeFile script
    set f [open script w]
    puts $f {
	package require tls
    }
    puts $f "tls::socket -server accept -certfile $serverCert -cafile $caCert -keyfile $serverKey 2821"
    puts $f "tls::socket -server accept -certfile $serverCert -cafile $caCert -keyfile $serverKey 8821"
    puts $f {
	proc accept args {
	    global x
	    set x done
	}
	puts ready
	set timer [after 10000 "set x timed_out"]
	vwait x
	after cancel $timer
    }
    close $f
    set f [open "|[list $::tcltest::tcltest script]" r]
    gets $f
    set s [tls::socket \
	    -certfile $clientCert -cafile $caCert -keyfile $clientKey \
	    127.0.0.1 2821]
	    127.0.0.1 8821]
    set p [fconfigure $s -sockname]
    close $s
    close $f
    set l ""
    lappend l [llength $p]
    lappend l [lindex $p 0]
    lappend l [string equal [lindex $p 2] 2821]
    lappend l [string equal [lindex $p 2] 8821]
} {3 127.0.0.1 0}

test tlsIO-7.3 {testing socket specific options} {socket} {
    set s [tls::socket \
	-certfile $serverCert -cafile $caCert -keyfile $serverKey \
    	-server accept 2822]
    	-server accept 8822]
    set l [fconfigure $s]
    close $s
    update
    llength $l
} 12

# bug report #5812 fconfigure doesn't return value for '-sockname'

test tlsIO-7.4 {testing socket specific options} {knownBug socket} {
    set s [tls::socket \
	-certfile $serverCert -cafile $caCert -keyfile $serverKey \
    	-server accept 2823]
    	-server accept 8823]
    proc accept {s a p} {
	global x
	set x [fconfigure $s -sockname]
	close $s
    }
    set s1 [tls::socket \
	-certfile $clientCert -cafile $caCert -keyfile $clientKey \
    	[info hostname] 2823]
    	[info hostname] 8823]
    set timer [after 10000 "set x timed_out"]
    vwait x
    after cancel $timer
    close $s
    close $s1
    set l ""
    lappend l [lindex $x 2] [llength $x]
} {2823 3}
} {8823 3}

# bug report #5812 fconfigure doesn't return value for '-sockname'

test tlsIO-7.5 {testing socket specific options} {knownBug socket unixOrPc} {
    set s [tls::socket \
	-certfile $serverCert -cafile $caCert -keyfile $serverKey \
    	-server accept 2829]
    	-server accept 8829]
    proc accept {s a p} {
	global x
	set x [fconfigure $s -sockname]
	close $s
    }
    set s1 [tls::socket \
	-certfile $clientCert -cafile $caCert -keyfile $clientKey \
    	127.0.0.1 2829]
    	127.0.0.1 8829]
    set timer [after 10000 "set x timed_out"]
    vwait x
    after cancel $timer
    close $s
    close $s1
    set l ""
    lappend l [lindex $x 0] [lindex $x 2] [llength $x]
} {127.0.0.1 2829 3}
} {127.0.0.1 8829 3}

test tlsIO-8.1 {testing -async flag on sockets} {unexplainedHang socket} {
    # test seems to hang -- awb 6/2/2000
    # NOTE: This test may fail on some Solaris 2.4 systems. If it does,
    # check that you have these patches installed (using showrev -p):
    #
    # 101907-05, 101925-02, 101945-14, 101959-03, 101969-05, 101973-03,
    # 101977-03, 101981-02, 101985-01, 102001-03, 102003-01, 102007-01,
    # 102011-02, 102024-01, 102039-01, 102044-01, 102048-01, 102062-03,
    # 102066-04, 102070-01, 102105-01, 102153-03, 102216-01, 102232-01,
    # 101878-03, 101879-01, 101880-03, 101933-01, 101950-01, 102030-01,
    # 102057-08, 102140-01, 101920-02, 101921-09, 101922-07, 101923-03
    #
    # If after installing these patches you are still experiencing a
    # problem, please email [email protected]. We have not observed this
    # failure on Solaris 2.5, so another option (instead of installing
    # these patches) is to upgrade to Solaris 2.5.
    set s [tls::socket \
	-certfile $serverCert -cafile $caCert -keyfile $serverKey \
    	-server accept 2830]
    	-server accept 8830]
    proc accept {s a p} {
	global x
	puts $s bye
	close $s
	set x done
    }
    set s1 [tls::socket \
	-certfile $clientCert -cafile $caCert -keyfile $clientKey \
	-async [info hostname] 2830]
	-async [info hostname] 8830]
    vwait x
    set z [gets $s1]
    close $s
    close $s1
    set z
} bye

    }
    proc accept {s a p} {
	fconfigure $s -buffering none -blocking off
	fileevent $s readable [list readlittle $s]
    }
    set s [tls::socket \
	-certfile $serverCert -cafile $caCert -keyfile $serverKey \
   	-server accept 2831]
   	-server accept 8831]
    set c [tls::socket \
	-certfile $clientCert -cafile $caCert -keyfile $clientKey \
    	[info hostname] 2831]
    	[info hostname] 8831]
    puts -nonewline $c 01234567890123456789012345678901234567890123456789
    close $c
    set timer [after 10000 "set done timed_out"]
    vwait done
    after cancel $timer
    close $s
    list $spurious $len
} {0 50}

test tlsIO-9.2 {testing async write, fileevents, flush on close} {socket} {
    set firstblock ""
    for {set i 0} {$i < 5} {incr i} {set firstblock "a$firstblock$firstblock"}
    set secondblock ""
    for {set i 0} {$i < 16} {incr i} {
	set secondblock "b$secondblock$secondblock"
    }
    set l [tls::socket \
	-certfile $serverCert -cafile $caCert -keyfile $serverKey \
    	-server accept 2832]
    	-server accept 8832]
    proc accept {s a p} {
	fconfigure $s -blocking 0 -translation lf -buffersize 16384 \
		-buffering line
	fileevent $s readable "readable $s"
    }
    proc readable {s} {
	set l [gets $s]

    proc writedata {s} {
	global secondblock
	puts -nonewline $s $secondblock
	close $s
    }
    set s [tls::socket \
	-certfile $clientCert -cafile $caCert -keyfile $clientKey \
    	[info hostname] 2832]
    	[info hostname] 8832]
    fconfigure $s -blocking 0 -trans lf -buffering line
    set count 0
    puts $s hello
    proc readit {s} {
	global count done
	set l [read $s]
	incr count [string length $l]

    }
    proc accept {s a p} {
	fconfigure $s -buffering line -translation lf
	fileevent $s writable "write_then_close $s"
    }
    set s [tls::socket \
	-certfile $serverCert -cafile $caCert -keyfile $serverKey \
    	-server accept 2833]
    	-server accept 8833]
    set c [tls::socket \
	-certfile $clientCert -cafile $caCert -keyfile $clientKey \
    	[info hostname] 2833]
    	[info hostname] 8833]
    fconfigure $c -blocking off -buffering line -translation lf
    fileevent $c readable "count_to_eof $c"
    set timer [after 1000 timerproc]
    vwait done
    close $s
    set count
} {eof is sticky}

removeFile script

test tlsIO-10.1 {testing socket accept callback error handling} {socket} {
    set goterror 0
    proc bgerror args {global goterror; set goterror 1}
    set s [tls::socket \
	-certfile $serverCert -cafile $caCert -keyfile $serverKey \
    	-server accept 2898]
    	-server accept 8898]
    proc accept {s a p} {close $s; error}
    set c [tls::socket \
	-certfile $clientCert -cafile $caCert -keyfile $clientKey \
	127.0.0.1 2898]
	127.0.0.1 8898]
    vwait goterror
    close $s
    close $c
    set goterror
} 1

test tlsIO-11.1 {tcp connection} {socket doTestsWithRemoteServer} {
    sendCommand "set caCert $caCert"
    sendCommand "set serverCert $serverCert"
    sendCommand "set clientCert $clientCert"
    sendCommand "set serverKey $serverKey"
    sendCommand "set clientKey $clientKey"
    sendCommand {
	set socket9_1_test_server [tls::socket -server accept \
		-certfile $serverCert \
		-cafile $caCert \
		-keyfile $serverKey \
		2834]
		8834]
	proc accept {s a p} {
	    puts $s done
	    tls::handshake $s
	    close $s
	}
    }
    set s [tls::socket \
	    -certfile $clientCert -cafile $caCert -keyfile $clientKey \
	    $remoteServerIP 2834]
	    $remoteServerIP 8834]
    set r [gets $s]
    close $s
    sendCommand {close $socket9_1_test_server}
    set r
} done

test tlsIO-11.2 {client specifies its port} {socket doTestsWithRemoteServer} {
    sendCommand "set caCert $caCert"
    sendCommand "set serverCert $serverCert"
    sendCommand "set clientCert $clientCert"
    sendCommand "set serverKey $serverKey"
    sendCommand "set clientKey $clientKey"
    if {[info exists port]} {
	incr port
    } else {
	set port [expr 2048 + [pid]%1024]
	set port [expr $tlsServerPort + [pid]%1024]
    }
    sendCommand {
	set socket9_2_test_server [tls::socket -server accept \
		-certfile $serverCert \
		-cafile $caCert \
		-keyfile $serverKey \
	    2835]
	    8835]
	proc accept {s a p} {
	    tls::handshake $s
	    puts $s $p
	    close $s
	}
    }
    set s [tls::socket \
	    -certfile $clientCert -cafile $caCert -keyfile $clientKey \
	    -myport $port $remoteServerIP 2835]
	    -myport $port $remoteServerIP 8835]
    set r [gets $s]
    close $s
    sendCommand {close $socket9_2_test_server}
    if {$r == $port} {
	set result ok
    } else {
	set result broken
    }
    set result
} ok
test tlsIO-11.3 {trying to connect, no server} {socket doTestsWithRemoteServer} {
    set status ok
    if {![catch {set s [tls::socket \
	    -certfile $clientCert -cafile $caCert -keyfile $clientKey \
	    $remoteServerIp 2836]}]} {
	    $remoteServerIp 8836]}]} {
	if {![catch {gets $s}]} {
	    set status broken
	}
	close $s
    }
    set status
} ok

    	global serverCert
	global caCert
	global serverKey
	set socket10_6_test_server [tls::socket \
		-certfile $serverCert \
		-cafile $caCert \
		-keyfile $serverKey \
		-server accept 2836]
		-server accept 8836]
	proc accept {s a p} {
	    tls::handshake $s
	    fileevent $s readable [list echo $s]
	    fconfigure $s -buffering line -translation crlf
	}
	proc echo {s} {
	    set l [gets $s]
	    if {[eof $s]} {
		close $s
	    } else {
		puts $s $l
	    }
	}
    }
    set f [tls::socket \
	    -certfile $clientCert -cafile $caCert -keyfile $clientKey \
	    $remoteServerIP 2836]
	    $remoteServerIP 8836]
    fconfigure $f -translation crlf -buffering line
    puts $f hello
    set r [gets $f]
    close $f
    sendCommand {close $socket10_6_test_server}
    set r
} hello

test tlsIO-11.5 {remote echo, 50 lines} {socket doTestsWithRemoteServer} {
    sendCommand "set caCert $caCert"
    sendCommand "set serverCert $serverCert"
    sendCommand "set clientCert $clientCert"
    sendCommand "set serverKey $serverKey"
    sendCommand "set clientKey $clientKey"
    sendCommand {
	set socket10_7_test_server [tls::socket -server accept \
		-certfile $serverCert \
		-cafile $caCert \
		-keyfile $serverKey \
		2836]
		8836]
	proc accept {s a p} {
	    tls::handshake $s
	    fileevent $s readable [list echo $s]
	    fconfigure $s -buffering line -translation crlf
	}
	proc echo {s} {
	    set l [gets $s]
	    if {[eof $s]} {
		close $s
	    } else {
		puts $s $l
	    }
	}
    }
    set f [tls::socket \
	    -certfile $clientCert -cafile $caCert -keyfile $clientKey \
	    $remoteServerIP 2836]
	    $remoteServerIP 8836]
    fconfigure $f -translation crlf -buffering line
    for {set cnt 0} {$cnt < 50} {incr cnt} {
	puts $f "hello, $cnt"
	if {[string compare [gets $f] "hello, $cnt"] != 0} {
	    break
	}
    }
    close $f
    sendCommand {close $socket10_7_test_server}
    set cnt
} 50

# Macintosh sockets can have more than one server per port
if {$tcl_platform(platform) == "macintosh"} {
    set conflictResult {0 2836}
    set conflictResult {0 8836}
} else {
    set conflictResult {1 {couldn't open socket: address already in use}}
}

test tlsIO-11.6 {socket conflict} {socket doTestsWithRemoteServer} {
    set s1 [tls::socket \
	    -certfile $serverCert -cafile $caCert -keyfile $serverKey \
	    -server accept 2836]
	    -server accept 8836]
    if {[catch {set s2 [tls::socket \
	    -certfile $serverCert -cafile $caCert -keyfile $serverKey \
	    -server accept 2836]} msg]} {
	    -server accept 8836]} msg]} {
	set result [list 1 $msg]
    } else {
	set result [list 0 [lindex [fconfigure $s2 -sockname] 2]]
	close $s2
    }
    close $s1
    set result
} $conflictResult

test tlsIO-11.7 {server with several clients} {socket doTestsWithRemoteServer} {
    sendCommand {
	set socket10_9_test_server [tls::socket \
		-certfile [file join [pwd] certs server.pem] \
		-cafile [file join [pwd] certs caFile.pem] \
		-keyfile [file join [pwd] certs skey.pem] \
		-server accept 2836]
		-server accept 8836]
	proc accept {s a p} {
	    # handshake locks up the three synchronous clients
	    # tls::handshake $s
	    fconfigure $s -buffering line
	    fileevent $s readable [list echo $s]
	}
	proc echo {s} {
	    set l [gets $s]
	    if {[eof $s]} {
		close $s
	    } else {
		puts $s $l
	    }
	}
    }
    set s1 [tls::socket \
	    -certfile $clientCert -cafile $caCert -keyfile $clientKey \
	    $remoteServerIP 2836]
	    $remoteServerIP 8836]
    fconfigure $s1 -buffering line
    set s2 [tls::socket \
	    -certfile $clientCert -cafile $caCert -keyfile $clientKey \
	    $remoteServerIP 2836]
	    $remoteServerIP 8836]
    fconfigure $s2 -buffering line
    set s3 [tls::socket \
	    -certfile $clientCert -cafile $caCert -keyfile $clientKey \
	    $remoteServerIP 2836]
	    $remoteServerIP 8836]
    fconfigure $s3 -buffering line
    for {set i 0} {$i < 100} {incr i} {
	puts $s1 hello,s1
	gets $s1
	puts $s2 hello,s2
	gets $s2
	puts $s3 hello,s3

    }
    set l
} {4003 {} 1 4004 {} 1 4005 {} 1}

test tlsIO-11.9 {accept callback error} {socket doTestsWithRemoteServer} {
    set s [tls::socket \
	    -certfile $serverCert -cafile $caCert -keyfile $serverKey \
	    -server accept 2836]
	    -server accept 8836]
    proc accept {s a p} {expr 10 / 0}
    proc bgerror args {
	global x
	set x $args
    }
    sendCommand "set caCert $caCert"
    sendCommand "set serverCert $serverCert"
    sendCommand "set clientCert $clientCert"
    sendCommand "set serverKey $serverKey"
    sendCommand "set clientKey $clientKey"
    if {[catch {sendCommand {
	    set peername [fconfigure $callerSocket -peername]
	    set s [tls::socket \
		-certfile $clientCert \
		-cafile $caCert \
		-keyfile $clientKey \
	    	[lindex $peername 0] 2836]
	    	[lindex $peername 0] 8836]
	    close $s
    	 }} msg]} {
	close $s
	error $msg
    }
    set timer [after 10000 "set x timed_out"]
    vwait x

    sendCommand "set serverKey $serverKey"
    sendCommand "set clientKey $clientKey"
    sendCommand {
	set socket10_12_test_server [tls::socket \
		-certfile $serverCert \
		-cafile $caCert \
		-keyfile $serverKey \
		-server accept 2836]
		-server accept 8836]
	proc accept {s a p} {close $s}
    }
    set s [tls::socket \
	    -certfile $clientCert -cafile $caCert -keyfile $clientKey \
	    $remoteServerIP 2836]
	    $remoteServerIP 8836]
    set p [fconfigure $s -peername]
    set n [fconfigure $s -sockname]
    set l ""
    lappend l [lindex $p 2] [llength $p] [llength $p]
    close $s
    sendCommand {close $socket10_12_test_server}
    set l
} {2836 3 3}
} {8836 3 3}

test tlsIO-11.11 {testing spurious events} {unexplainedHang socket doTestsWithRemoteServer} {
    # hangs
    sendCommand "set caCert $caCert"
    sendCommand "set serverCert $serverCert"
    sendCommand "set clientCert $clientCert"
    sendCommand "set serverKey $serverKey"
    sendCommand "set clientKey $clientKey"
    sendCommand {
	set socket10_13_test_server [tls::socket \
		-certfile $serverCert \
		-cafile $caCert \
		-keyfile $serverKey \
		-server accept 2836]
		-server accept 8836]
	proc accept {s a p} {
	    tls::handshake $s
	    fconfigure $s -translation "auto lf"
	    after 100 writesome $s
	}
	proc writesome {s} {
	    for {set i 0} {$i < 100} {incr i} {

	    }
	} else {
	    incr len [string length $l]
	}
    }
    set c [tls::socket \
	    -certfile $clientCert -cafile $caCert -keyfile $clientKey \
	    $remoteServerIP 2836]
	    $remoteServerIP 8836]
    fileevent $c readable "readlittle $c"
    set timer [after 10000 "set done timed_out"]
    vwait done
    after cancel $timer
    sendCommand {close $socket10_13_test_server}
    list $spurious $len
} {0 2690}

    sendCommand "set serverKey $serverKey"
    sendCommand "set clientKey $clientKey"
    sendCommand {
	set socket10_14_test_server [tls::socket \
		-certfile $serverCert \
		-cafile $caCert \
		-keyfile $serverKey \
		-server accept 2836]
		-server accept 8836]
	proc accept {s a p} {
	    tls::handshake $s
	    after 100 close $s
	}
    }
    set c [tls::socket \
	    -certfile $clientCert -cafile $caCert -keyfile $clientKey \
    	$remoteServerIP 2836]
    	$remoteServerIP 8836]
    fileevent $c readable "count_up $c"
    set after_id [after 1000 timed_out]
    vwait done
    sendCommand {close $socket10_14_test_server}
    set done
} {EOF is sticky}

	for {set i 0} {$i < 16} {incr i} {
	    set secondblock "b$secondblock$secondblock"
	}
	set l [tls::socket \
		-certfile $serverCert \
		-cafile $caCert \
		-keyfile $serverKey \
		-server accept 2845]
		-server accept 8845]
	proc accept {s a p} {
	    tls::handshake $s
	    fconfigure $s -blocking 0 -translation lf -buffersize 16384 \
		-buffering line
	    fileevent $s readable "readable $s"
	}
	proc readable {s} {

	    global secondblock
	    puts -nonewline $s $secondblock
	    close $s
	}
    }
    set s [tls::socket \
	    -certfile $clientCert -cafile $caCert -keyfile $clientKey \
    	$remoteServerIP 2845]
    	$remoteServerIP 8845]
    fconfigure $s -blocking 0 -trans lf -buffering line
    set count 0
    puts $s hello
    fileevent $s readable "readit $s"
    set timer [after 10000 "set done timed_out"]
    vwait done
    after cancel $timer

    set f [open script2 w]
    # puts $f [list set tcltest $::tcltest::tcltest]
    puts $f [list set tclsh [info nameofexecutable]]
    puts $f {
	package require tcltest
	package require tls
    }
    puts $f "set f \[tls::socket -server accept -certfile $serverCert -cafile $caCert -keyfile $serverKey 2828 \]"
    puts $f "set f \[tls::socket -server accept -certfile $serverCert -cafile $caCert -keyfile $serverKey 8828 \]"
    puts $f {
	proc accept { file addr port } {
	    close $file
	}
	# exec $::tcltest::tcltest script1 &
	exec $tclsh script1 &
	close $f

    after 5000 { set ok_to_proceed 1 }
    vwait ok_to_proceed

    # If we can still connect to the server, the socket got inherited.

    if {[catch {tls::socket \
	-certfile $clientCert -cafile $caCert -keyfile $clientKey \
   	 127.0.0.1 2828} msg]} {
   	 127.0.0.1 8828} msg]} {
	set x {server socket was not inherited}
    } else {
	close $msg
	set x {server socket was inherited}
    }

    removeFile script1

    # client socket, the socket will still be open.

    set f [open script2 w]
    puts $f [list set tclsh [info nameofexecutable]]
    puts $f {
    	package require tls
    }
    puts $f "set f \[tls::socket -certfile $clientCert -cafile $caCert -keyfile $clientKey 127.0.0.1 2829 \]"
    puts $f "set f \[tls::socket -certfile $clientCert -cafile $caCert -keyfile $clientKey 127.0.0.1 8829 \]"
    puts $f {
	exec $tclsh script1 &
	puts $f testing
	flush $f
	after 1000 exit
	vwait forever
    }
    close $f

    # Create the server socket

    set server [tls::socket \
	-certfile $serverCert -cafile $caCert -keyfile $serverKey \
	-server accept 2829]
	-server accept 8829]
    proc accept { file host port } {

	# When the client connects, establish the read handler
	global server
	close $server
	fileevent $file readable [list getdata $file]
	fconfigure $file -buffering line -blocking 0

    close $f

    set f [open script2 w]
    puts $f [list set tclsh [info nameofexecutable]]
    puts $f {
    	package require tls
    }
    puts $f "catch {set f \[tls::socket -server accept -certfile $serverCert -cafile $caCert -keyfile $serverKey 2930 \]}"
    puts $f "catch {set f \[tls::socket -server accept -certfile $serverCert -cafile $caCert -keyfile $serverKey 8930 \]}"
    puts $f {
	proc accept { file host port } {
	    global tclsh
	    puts $file {test data on socket}
	    exec $tclsh script1 &
	    after 1000 exit
	}

    exec [info nameofexecutable] script2 &

    after 1000 set ok_to_proceed 1
    vwait ok_to_proceed

    set f [tls::socket \
	    -certfile $clientCert -cafile $caCert -keyfile $clientKey \
	    127.0.0.1 2930]
	    127.0.0.1 8930]
    fconfigure $f -buffering full -blocking 0
    fileevent $f readable [list getdata $f]

    # If the socket is still open after 5 seconds, the script1 process
    # must have inherited the accepted socket.

    set failed 0

	{socket testthread} {

    removeFile script
    threadReap

    makeFile {
    	package require tls
	set f [tls::socket -server accept 2828]
	set f [tls::socket -server accept 8828]
	proc accept {s a p} {
            fileevent $s readable [list echo $s]
            fconfigure $s -buffering line
        }
	proc echo {s} {
	     global i
             set l [gets $s]

    } script
    
    # create a thread
    set serverthread [testthread create { source script } ]
    update
    
    after 1000
    set s [tls::socket 127.0.0.1 2828]
    set s [tls::socket 127.0.0.1 8828]
    fconfigure $s -buffering line

    catch {
	puts $s "hello"
	gets $s result
    }
    close $s