# tcl.m4 -- # # This file provides a set of autoconf macros to help TEA-enable # a Tcl extension. # # Copyright (c) 1999-2000 Ajuba Solutions. # Copyright (c) 2002-2003 ActiveState Corporation. # # See the file "license.terms" for information on usage and redistribution # of this file, and for a DISCLAIMER OF ALL WARRANTIES. # # RCS: @(#) $Id: tcl.m4,v 1.4 2005/02/09 00:58:27 hobbs2 Exp $ AC_PREREQ(2.50) #------------------------------------------------------------------------ # TEA_PATH_TCLCONFIG -- # # Locate the tclConfig.sh file and perform a sanity check on # the Tcl compile flags # # Arguments: # none # # Results: # # Adds the following arguments to configure: # --with-tcl=... # # Defines the following vars: # TCL_BIN_DIR Full path to the directory containing # the tclConfig.sh file #------------------------------------------------------------------------ AC_DEFUN(TEA_PATH_TCLCONFIG, [ dnl Make sure we are initialized AC_REQUIRE([TEA_INIT]) # # Ok, lets find the tcl configuration # First, look for one uninstalled. # the alternative search directory is invoked by --with-tcl # if test x"${no_tcl}" = x ; then # we reset no_tcl in case something fails here no_tcl=true AC_ARG_WITH(tcl, [ --with-tcl directory containing tcl configuration (tclConfig.sh)], with_tclconfig=${withval}) AC_MSG_CHECKING([for Tcl configuration]) AC_CACHE_VAL(ac_cv_c_tclconfig,[ # First check to see if --with-tcl was specified. if test x"${with_tclconfig}" != x ; then if test -f "${with_tclconfig}/tclConfig.sh" ; then ac_cv_c_tclconfig=`(cd ${with_tclconfig}; pwd)` else AC_MSG_ERROR([${with_tclconfig} directory doesn't contain tclConfig.sh]) fi fi # then check for a private Tcl installation if test x"${ac_cv_c_tclconfig}" = x ; then for i in \ ../tcl \ `ls -dr ../tcl[[8-9]].[[0-9]]* 2>/dev/null` \ ../../tcl \ `ls -dr ../../tcl[[8-9]].[[0-9]]* 2>/dev/null` \ ../../../tcl \ `ls -dr ../../../tcl[[8-9]].[[0-9]]* 2>/dev/null` ; do if test -f "$i/unix/tclConfig.sh" ; then ac_cv_c_tclconfig=`(cd $i/unix; pwd)` break fi done fi # check in a few common install locations if test x"${ac_cv_c_tclconfig}" = x ; then for i in `ls -d ${exec_prefix}/lib 2>/dev/null` \ `ls -d ${prefix}/lib 2>/dev/null` \ `ls -d /usr/local/lib 2>/dev/null` \ `ls -d /usr/contrib/lib 2>/dev/null` \ `ls -d /usr/lib 2>/dev/null` \ ; do if test -f "$i/tclConfig.sh" ; then ac_cv_c_tclconfig=`(cd $i; pwd)` break fi done fi # check in a few other private locations if test x"${ac_cv_c_tclconfig}" = x ; then for i in \ ${srcdir}/../tcl \ `ls -dr ${srcdir}/../tcl[[8-9]].[[0-9]]* 2>/dev/null` ; do if test -f "$i/unix/tclConfig.sh" ; then ac_cv_c_tclconfig=`(cd $i/unix; pwd)` break fi done fi ]) if test x"${ac_cv_c_tclconfig}" = x ; then TCL_BIN_DIR="# no Tcl configs found" AC_MSG_WARN("Cannot find Tcl configuration definitions") exit 0 else no_tcl= TCL_BIN_DIR=${ac_cv_c_tclconfig} AC_MSG_RESULT([found $TCL_BIN_DIR/tclConfig.sh]) fi fi ]) #------------------------------------------------------------------------ # TEA_PATH_TKCONFIG -- # # Locate the tkConfig.sh file # # Arguments: # none # # Results: # # Adds the following arguments to configure: # --with-tk=... # # Defines the following vars: # TK_BIN_DIR Full path to the directory containing # the tkConfig.sh file #------------------------------------------------------------------------ AC_DEFUN(TEA_PATH_TKCONFIG, [ # # Ok, lets find the tk configuration # First, look for one uninstalled. # the alternative search directory is invoked by --with-tk # if test x"${no_tk}" = x ; then # we reset no_tk in case something fails here no_tk=true AC_ARG_WITH(tk, [ --with-tk directory containing tk configuration (tkConfig.sh)], with_tkconfig=${withval}) AC_MSG_CHECKING([for Tk configuration]) AC_CACHE_VAL(ac_cv_c_tkconfig,[ # First check to see if --with-tkconfig was specified. if test x"${with_tkconfig}" != x ; then if test -f "${with_tkconfig}/tkConfig.sh" ; then ac_cv_c_tkconfig=`(cd ${with_tkconfig}; pwd)` else AC_MSG_ERROR([${with_tkconfig} directory doesn't contain tkConfig.sh]) fi fi # then check for a private Tk library if test x"${ac_cv_c_tkconfig}" = x ; then for i in \ ../tk \ `ls -dr ../tk[[8-9]].[[0-9]]* 2>/dev/null` \ ../../tk \ `ls -dr ../../tk[[8-9]].[[0-9]]* 2>/dev/null` \ ../../../tk \ `ls -dr ../../../tk[[8-9]].[[0-9]]* 2>/dev/null` ; do if test -f "$i/unix/tkConfig.sh" ; then ac_cv_c_tkconfig=`(cd $i/unix; pwd)` break fi done fi # check in a few common install locations if test x"${ac_cv_c_tkconfig}" = x ; then for i in `ls -d ${exec_prefix}/lib 2>/dev/null` \ `ls -d ${prefix}/lib 2>/dev/null` \ `ls -d /usr/local/lib 2>/dev/null` \ `ls -d /usr/contrib/lib 2>/dev/null` \ `ls -d /usr/lib 2>/dev/null` \ ; do if test -f "$i/tkConfig.sh" ; then ac_cv_c_tkconfig=`(cd $i; pwd)` break fi done fi # check in a few other private locations if test x"${ac_cv_c_tkconfig}" = x ; then for i in \ ${srcdir}/../tk \ `ls -dr ${srcdir}/../tk[[8-9]].[[0-9]]* 2>/dev/null` ; do if test -f "$i/unix/tkConfig.sh" ; then ac_cv_c_tkconfig=`(cd $i/unix; pwd)` break fi done fi ]) if test x"${ac_cv_c_tkconfig}" = x ; then TK_BIN_DIR="# no Tk configs found" AC_MSG_WARN("Cannot find Tk configuration definitions") exit 0 else no_tk= TK_BIN_DIR=${ac_cv_c_tkconfig} AC_MSG_RESULT([found $TK_BIN_DIR/tkConfig.sh]) fi fi ]) #------------------------------------------------------------------------ # TEA_LOAD_TCLCONFIG -- # # Load the tclConfig.sh file # # Arguments: # # Requires the following vars to be set: # TCL_BIN_DIR # # Results: # # Subst the following vars: # TCL_BIN_DIR # TCL_SRC_DIR # TCL_LIB_FILE # #------------------------------------------------------------------------ AC_DEFUN(TEA_LOAD_TCLCONFIG, [ AC_MSG_CHECKING([for existence of $TCL_BIN_DIR/tclConfig.sh]) if test -f "$TCL_BIN_DIR/tclConfig.sh" ; then AC_MSG_RESULT([loading]) . $TCL_BIN_DIR/tclConfig.sh else AC_MSG_RESULT([file not found]) fi # # If the TCL_BIN_DIR is the build directory (not the install directory), # then set the common variable name to the value of the build variables. # For example, the variable TCL_LIB_SPEC will be set to the value # of TCL_BUILD_LIB_SPEC. An extension should make use of TCL_LIB_SPEC # instead of TCL_BUILD_LIB_SPEC since it will work with both an # installed and uninstalled version of Tcl. # if test -f $TCL_BIN_DIR/Makefile ; then TCL_LIB_SPEC=${TCL_BUILD_LIB_SPEC} TCL_STUB_LIB_SPEC=${TCL_BUILD_STUB_LIB_SPEC} TCL_STUB_LIB_PATH=${TCL_BUILD_STUB_LIB_PATH} fi # # eval is required to do the TCL_DBGX substitution # eval "TCL_LIB_FILE=\"${TCL_LIB_FILE}\"" eval "TCL_LIB_FLAG=\"${TCL_LIB_FLAG}\"" eval "TCL_LIB_SPEC=\"${TCL_LIB_SPEC}\"" eval "TCL_STUB_LIB_FILE=\"${TCL_STUB_LIB_FILE}\"" eval "TCL_STUB_LIB_FLAG=\"${TCL_STUB_LIB_FLAG}\"" eval "TCL_STUB_LIB_SPEC=\"${TCL_STUB_LIB_SPEC}\"" AC_SUBST(TCL_VERSION) AC_SUBST(TCL_BIN_DIR) AC_SUBST(TCL_SRC_DIR) AC_SUBST(TCL_LIB_FILE) AC_SUBST(TCL_LIB_FLAG) AC_SUBST(TCL_LIB_SPEC) AC_SUBST(TCL_STUB_LIB_FILE) AC_SUBST(TCL_STUB_LIB_FLAG) AC_SUBST(TCL_STUB_LIB_SPEC) AC_SUBST(TCL_LIBS) AC_SUBST(TCL_DEFS) AC_SUBST(TCL_EXTRA_CFLAGS) AC_SUBST(TCL_LD_FLAGS) AC_SUBST(TCL_SHLIB_LD_LIBS) #AC_SUBST(TCL_BUILD_LIB_SPEC) #AC_SUBST(TCL_BUILD_STUB_LIB_SPEC) ]) #------------------------------------------------------------------------ # TEA_LOAD_TKCONFIG -- # # Load the tkConfig.sh file # # Arguments: # # Requires the following vars to be set: # TK_BIN_DIR # # Results: # # Sets the following vars that should be in tkConfig.sh: # TK_BIN_DIR #------------------------------------------------------------------------ AC_DEFUN(TEA_LOAD_TKCONFIG, [ AC_MSG_CHECKING([for existence of ${TK_BIN_DIR}/tkConfig.sh]) if test -f "${TK_BIN_DIR}/tkConfig.sh" ; then AC_MSG_RESULT([loading]) . $TK_BIN_DIR/tkConfig.sh else AC_MSG_RESULT([could not find ${TK_BIN_DIR}/tkConfig.sh]) fi # # If the TK_BIN_DIR is the build directory (not the install directory), # then set the common variable name to the value of the build variables. # For example, the variable TK_LIB_SPEC will be set to the value # of TK_BUILD_LIB_SPEC. An extension should make use of TK_LIB_SPEC # instead of TK_BUILD_LIB_SPEC since it will work with both an # installed and uninstalled version of Tcl. # if test -f $TK_BIN_DIR/Makefile ; then TK_LIB_SPEC=${TK_BUILD_LIB_SPEC} TK_STUB_LIB_SPEC=${TK_BUILD_STUB_LIB_SPEC} TK_STUB_LIB_PATH=${TK_BUILD_STUB_LIB_PATH} fi # # eval is required to do the TK_DBGX substitution # eval "TK_LIB_FILE=\"${TK_LIB_FILE}\"" eval "TK_LIB_FLAG=\"${TK_LIB_FLAG}\"" eval "TK_LIB_SPEC=\"${TK_LIB_SPEC}\"" eval "TK_STUB_LIB_FILE=\"${TK_STUB_LIB_FILE}\"" eval "TK_STUB_LIB_FLAG=\"${TK_STUB_LIB_FLAG}\"" eval "TK_STUB_LIB_SPEC=\"${TK_STUB_LIB_SPEC}\"" AC_SUBST(TK_VERSION) AC_SUBST(TK_BIN_DIR) AC_SUBST(TK_SRC_DIR) AC_SUBST(TK_LIB_FILE) AC_SUBST(TK_LIB_FLAG) AC_SUBST(TK_LIB_SPEC) AC_SUBST(TK_STUB_LIB_FILE) AC_SUBST(TK_STUB_LIB_FLAG) AC_SUBST(TK_STUB_LIB_SPEC) AC_SUBST(TK_LIBS) AC_SUBST(TK_XINCLUDES) ]) #------------------------------------------------------------------------ # TEA_ENABLE_SHARED -- # # Allows the building of shared libraries # # Arguments: # none # # Results: # # Adds the following arguments to configure: # --enable-shared=yes|no # # Defines the following vars: # STATIC_BUILD Used for building import/export libraries # on Windows. # # Sets the following vars: # SHARED_BUILD Value of 1 or 0 #------------------------------------------------------------------------ AC_DEFUN(TEA_ENABLE_SHARED, [ AC_MSG_CHECKING([how to build libraries]) AC_ARG_ENABLE(shared, [ --enable-shared build and link with shared libraries [--enable-shared]], [tcl_ok=$enableval], [tcl_ok=yes]) if test "${enable_shared+set}" = set; then enableval="$enable_shared" tcl_ok=$enableval else tcl_ok=yes fi if test "$tcl_ok" = "yes" ; then AC_MSG_RESULT([shared]) SHARED_BUILD=1 else AC_MSG_RESULT([static]) SHARED_BUILD=0 AC_DEFINE(STATIC_BUILD) fi AC_SUBST(SHARED_BUILD) ]) #------------------------------------------------------------------------ # TEA_ENABLE_THREADS -- # # Specify if thread support should be enabled. If "yes" is # specified as an arg (optional), threads are enabled by default. # TCL_THREADS is checked so that if you are compiling an extension # against a threaded core, your extension must be compiled threaded # as well. # # Arguments: # none # # Results: # # Adds the following arguments to configure: # --enable-threads # # Sets the following vars: # THREADS_LIBS Thread library(s) # # Defines the following vars: # TCL_THREADS # _REENTRANT # #------------------------------------------------------------------------ AC_DEFUN(TEA_ENABLE_THREADS, [ AC_ARG_ENABLE(threads, [ --enable-threads build with threads], [tcl_ok=$enableval], [tcl_ok=$1]) if test "$tcl_ok" = "yes" -o "${TCL_THREADS}" = 1; then TCL_THREADS=1 if test "${TEA_PLATFORM}" != "windows" ; then # We are always OK on Windows, so check what this platform wants. AC_DEFINE(USE_THREAD_ALLOC) AC_DEFINE(_REENTRANT) AC_DEFINE(_THREAD_SAFE) AC_CHECK_LIB(pthread,pthread_mutex_init,tcl_ok=yes,tcl_ok=no) if test "$tcl_ok" = "no"; then # Check a little harder for __pthread_mutex_init in the # same library, as some systems hide it there until # pthread.h is defined. We could alternatively do an # AC_TRY_COMPILE with pthread.h, but that will work with # libpthread really doesn't exist, like AIX 4.2. # [Bug: 4359] AC_CHECK_LIB(pthread, __pthread_mutex_init, tcl_ok=yes, tcl_ok=no) fi if test "$tcl_ok" = "yes"; then # The space is needed THREADS_LIBS=" -lpthread" else AC_CHECK_LIB(pthreads, pthread_mutex_init, tcl_ok=yes, tcl_ok=no) if test "$tcl_ok" = "yes"; then # The space is needed THREADS_LIBS=" -lpthreads" else AC_CHECK_LIB(c, pthread_mutex_init, tcl_ok=yes, tcl_ok=no) if test "$tcl_ok" = "no"; then AC_CHECK_LIB(c_r, pthread_mutex_init, tcl_ok=yes, tcl_ok=no) if test "$tcl_ok" = "yes"; then # The space is needed THREADS_LIBS=" -pthread" else TCL_THREADS=0 AC_MSG_WARN("Don t know how to find pthread lib on your system - thread support disabled") fi fi fi fi # Does the pthread-implementation provide # 'pthread_attr_setstacksize' ? ac_saved_libs=$LIBS LIBS="$LIBS $THREADS_LIBS" AC_CHECK_FUNCS(pthread_attr_setstacksize) LIBS=$ac_saved_libs AC_CHECK_FUNCS(readdir_r) fi else TCL_THREADS=0 fi # Do checking message here to not mess up interleaved configure output AC_MSG_CHECKING([for building with threads]) if test "${TCL_THREADS}" = "1"; then AC_DEFINE(TCL_THREADS) #LIBS="$LIBS $THREADS_LIBS" AC_MSG_RESULT([yes]) else AC_MSG_RESULT([no (default)]) fi # TCL_THREADS sanity checking. See if our request for building with # threads is the same as the way Tcl was built. If not, warn the user. case ${TCL_DEFS} in *THREADS=1*) if test "${TCL_THREADS}" = "0"; then AC_MSG_WARN([ Building ${PACKAGE_NAME} without threads enabled, but building against a Tcl that IS thread-enabled.]) fi ;; *) if test "${TCL_THREADS}" = "1"; then AC_MSG_WARN([ --enable-threads requested, but attempting building against a Tcl that is NOT thread-enabled.]) fi ;; esac AC_SUBST(TCL_THREADS) ]) #------------------------------------------------------------------------ # TEA_ENABLE_SYMBOLS -- # # Specify if debugging symbols should be used # Memory (TCL_MEM_DEBUG) debugging can also be enabled. # # Arguments: # none # # Requires the following vars to be set: # CFLAGS_DEBUG # CFLAGS_OPTIMIZE # LDFLAGS_DEBUG # LDFLAGS_OPTIMIZE # # Results: # # Adds the following arguments to configure: # --enable-symbols # # Defines the following vars: # CFLAGS_DEFAULT Sets to CFLAGS_DEBUG if true # Sets to CFLAGS_OPTIMIZE if false # LDFLAGS_DEFAULT Sets to LDFLAGS_DEBUG if true # Sets to LDFLAGS_OPTIMIZE if false # DBGX Formerly used as debug library extension; # always blank now. # #------------------------------------------------------------------------ AC_DEFUN(TEA_ENABLE_SYMBOLS, [ dnl Make sure we are initialized AC_REQUIRE([TEA_CONFIG_CFLAGS]) DBGX="" AC_MSG_CHECKING([for build with symbols]) AC_ARG_ENABLE(symbols, [ --enable-symbols build with debugging symbols [--disable-symbols]], [tcl_ok=$enableval], [tcl_ok=no]) if test "$tcl_ok" = "no"; then CFLAGS_DEFAULT="${CFLAGS_OPTIMIZE}" LDFLAGS_DEFAULT="${LDFLAGS_OPTIMIZE}" AC_MSG_RESULT([no]) else CFLAGS_DEFAULT="${CFLAGS_DEBUG}" LDFLAGS_DEFAULT="${LDFLAGS_DEBUG}" if test "$tcl_ok" = "yes"; then AC_MSG_RESULT([yes (standard debugging)]) fi fi if test "${TEA_PLATFORM}" != "windows" ; then LDFLAGS_DEFAULT="${LDFLAGS}" fi AC_SUBST(TCL_DBGX) AC_SUBST(CFLAGS_DEFAULT) AC_SUBST(LDFLAGS_DEFAULT) if test "$tcl_ok" = "mem" -o "$tcl_ok" = "all"; then AC_DEFINE(TCL_MEM_DEBUG) fi if test "$tcl_ok" != "yes" -a "$tcl_ok" != "no"; then if test "$tcl_ok" = "all"; then AC_MSG_RESULT([enabled symbols mem debugging]) else AC_MSG_RESULT([enabled $tcl_ok debugging]) fi fi ]) #------------------------------------------------------------------------ # TEA_ENABLE_LANGINFO -- # # Allows use of modern nl_langinfo check for better l10n. # This is only relevant for Unix. # # Arguments: # none # # Results: # # Adds the following arguments to configure: # --enable-langinfo=yes|no (default is yes) # # Defines the following vars: # HAVE_LANGINFO Triggers use of nl_langinfo if defined. # #------------------------------------------------------------------------ AC_DEFUN(TEA_ENABLE_LANGINFO, [ AC_ARG_ENABLE(langinfo, [ --enable-langinfo use nl_langinfo if possible to determine encoding at startup, otherwise use old heuristic], [langinfo_ok=$enableval], [langinfo_ok=yes]) HAVE_LANGINFO=0 if test "$langinfo_ok" = "yes"; then if test "$langinfo_ok" = "yes"; then AC_CHECK_HEADER(langinfo.h,[langinfo_ok=yes],[langinfo_ok=no]) fi fi AC_MSG_CHECKING([whether to use nl_langinfo]) if test "$langinfo_ok" = "yes"; then AC_TRY_COMPILE([#include ], [nl_langinfo(CODESET);],[langinfo_ok=yes],[langinfo_ok=no]) if test "$langinfo_ok" = "no"; then langinfo_ok="no (could not compile with nl_langinfo)"; fi if test "$langinfo_ok" = "yes"; then AC_DEFINE(HAVE_LANGINFO) fi fi AC_MSG_RESULT([$langinfo_ok]) ]) #-------------------------------------------------------------------- # TEA_CONFIG_CFLAGS # # Try to determine the proper flags to pass to the compiler # for building shared libraries and other such nonsense. # # Arguments: # none # # Results: # # Defines the following vars: # # DL_OBJS - Name of the object file that implements dynamic # loading for Tcl on this system. # DL_LIBS - Library file(s) to include in tclsh and other base # applications in order for the "load" command to work. # LDFLAGS - Flags to pass to the compiler when linking object # files into an executable application binary such # as tclsh. # LD_SEARCH_FLAGS-Flags to pass to ld, such as "-R /usr/local/tcl/lib", # that tell the run-time dynamic linker where to look # for shared libraries such as libtcl.so. Depends on # the variable LIB_RUNTIME_DIR in the Makefile. # SHLIB_CFLAGS - Flags to pass to cc when compiling the components # of a shared library (may request position-independent # code, among other things). # SHLIB_LD - Base command to use for combining object files # into a shared library. # SHLIB_LD_LIBS - Dependent libraries for the linker to scan when # creating shared libraries. This symbol typically # goes at the end of the "ld" commands that build # shared libraries. The value of the symbol is # "${LIBS}" if all of the dependent libraries should # be specified when creating a shared library. If # dependent libraries should not be specified (as on # SunOS 4.x, where they cause the link to fail, or in # general if Tcl and Tk aren't themselves shared # libraries), then this symbol has an empty string # as its value. # SHLIB_SUFFIX - Suffix to use for the names of dynamically loadable # extensions. An empty string means we don't know how # to use shared libraries on this platform. # TCL_LIB_FILE - Name of the file that contains the Tcl library, such # as libtcl7.8.so or libtcl7.8.a. # TCL_LIB_SUFFIX -Specifies everything that comes after the "libtcl" # in the shared library name, using the # ${PACKAGE_VERSION} variable to put the version in # the right place. This is used by platforms that # need non-standard library names. # Examples: ${PACKAGE_VERSION}.so.1.1 on NetBSD, # since it needs to have a version after the .so, and # ${PACKAGE_VERSION}.a on AIX, since the Tcl shared # library needs to have a .a extension whereas shared # objects for loadable extensions have a .so # extension. Defaults to # ${PACKAGE_VERSION}${SHLIB_SUFFIX}. # TCL_NEEDS_EXP_FILE - # 1 means that an export file is needed to link to a # shared library. # TCL_EXP_FILE - The name of the installed export / import file which # should be used to link to the Tcl shared library. # Empty if Tcl is unshared. # TCL_BUILD_EXP_FILE - # The name of the built export / import file which # should be used to link to the Tcl shared library. # Empty if Tcl is unshared. # CFLAGS_DEBUG - # Flags used when running the compiler in debug mode # CFLAGS_OPTIMIZE - # Flags used when running the compiler in optimize mode # CFLAGS - We add CFLAGS to pass to the compiler # # Subst's the following vars: # DL_LIBS # CFLAGS_DEBUG # CFLAGS_OPTIMIZE # CFLAGS_WARNING # # STLIB_LD # SHLIB_LD # SHLIB_CFLAGS # LDFLAGS_DEBUG # LDFLAGS_OPTIMIZE #-------------------------------------------------------------------- AC_DEFUN(TEA_CONFIG_CFLAGS, [ dnl Make sure we are initialized AC_REQUIRE([TEA_INIT]) # Step 0: Enable 64 bit support? AC_MSG_CHECKING([if 64bit support is enabled]) AC_ARG_ENABLE(64bit,[ --enable-64bit enable 64bit support (where applicable)], [do64bit=$enableval], [do64bit=no]) AC_MSG_RESULT([$do64bit]) # Step 0.b: Enable Solaris 64 bit VIS support? AC_MSG_CHECKING([if 64bit Sparc VIS support is requested]) AC_ARG_ENABLE(64bit-vis,[ --enable-64bit-vis enable 64bit Sparc VIS support], [do64bitVIS=$enableval], [do64bitVIS=no]) AC_MSG_RESULT([$do64bitVIS]) if test "$do64bitVIS" = "yes"; then # Force 64bit on with VIS do64bit=yes fi # Step 0.c: Cross-compiling options for Windows/CE builds? if test "${TEA_PLATFORM}" = "windows" ; then AC_MSG_CHECKING([if Windows/CE build is requested]) AC_ARG_ENABLE(wince,[ --enable-wince enable Win/CE support (where applicable)], [doWince=$enableval], [doWince=no]) AC_MSG_RESULT($doWince) fi # Step 1: set the variable "system" to hold the name and version number # for the system. This can usually be done via the "uname" command, but # there are a few systems, like Next, where this doesn't work. AC_MSG_CHECKING([system version (for dynamic loading)]) if test -f /usr/lib/NextStep/software_version; then system=NEXTSTEP-`awk '/3/,/3/' /usr/lib/NextStep/software_version` else system=`uname -s`-`uname -r` if test "$?" -ne 0 ; then AC_MSG_RESULT([unknown (can't find uname command)]) system=unknown else # Special check for weird MP-RAS system (uname returns weird # results, and the version is kept in special file). if test -r /etc/.relid -a "X`uname -n`" = "X`uname -s`" ; then system=MP-RAS-`awk '{print $3}' /etc/.relid'` fi if test "`uname -s`" = "AIX" ; then system=AIX-`uname -v`.`uname -r` fi if test "${TEA_PLATFORM}" = "windows" ; then system=windows fi AC_MSG_RESULT([$system]) fi fi # Step 2: check for existence of -ldl library. This is needed because # Linux can use either -ldl or -ldld for dynamic loading. AC_CHECK_LIB(dl, dlopen, have_dl=yes, have_dl=no) # Step 3: set configuration options based on system name and version. # This is similar to Tcl's unix/tcl.m4 except that we've added a # "windows" case and CC_SEARCH_FLAGS becomes LD_SEARCH_FLAGS for us # (and we have no CC_SEARCH_FLAGS). do64bit_ok=no LDFLAGS_ORIG="$LDFLAGS" TCL_EXPORT_FILE_SUFFIX="" UNSHARED_LIB_SUFFIX="" TCL_TRIM_DOTS='`echo ${PACKAGE_VERSION} | tr -d .`' ECHO_VERSION='`echo ${PACKAGE_VERSION}`' TCL_LIB_VERSIONS_OK=ok CFLAGS_DEBUG=-g if test "$GCC" = "yes" ; then CFLAGS_OPTIMIZE=-O2 CFLAGS_WARNING="-Wall -Wno-implicit-int" else CFLAGS_OPTIMIZE=-O CFLAGS_WARNING="" fi TCL_NEEDS_EXP_FILE=0 TCL_BUILD_EXP_FILE="" TCL_EXP_FILE="" dnl FIXME: Replace AC_CHECK_PROG with AC_CHECK_TOOL once cross compiling is fixed. dnl AC_CHECK_TOOL(AR, ar, :) AC_CHECK_PROG(AR, ar, ar) STLIB_LD='${AR} cr' LD_LIBRARY_PATH_VAR="LD_LIBRARY_PATH" case $system in windows) # This is a 2-stage check to make sure we have the 64-bit SDK # We have to know where the SDK is installed. if test "$do64bit" = "yes" ; then if test "x${MSSDK}x" = "xx" ; then MSSDK="C:/Progra~1/Microsoft SDK" fi # Ensure that this path has no spaces to work in autoconf TEA_PATH_NOSPACE(MSSDK, ${MSSDK}) if test ! -d "${MSSDK}/bin/win64" ; then AC_MSG_WARN([could not find 64-bit SDK to enable 64bit mode]) do64bit="no" else do64bit_ok="yes" fi fi if test "$doWince" != "no" ; then if test "$do64bit" = "yes" ; then AC_MSG_ERROR([Windows/CE and 64-bit builds incompatible]) fi if test "$GCC" = "yes" ; then AC_MSG_ERROR([Windows/CE and GCC builds incompatible]) fi TEA_PATH_CELIB # Set defaults for common evc4/PPC2003 setup # Currently Tcl requires 300+, possibly 420+ for sockets CEVERSION=420; # could be 211 300 301 400 420 ... TARGETCPU=ARMV4; # could be ARMV4 ARM MIPS SH3 X86 ... ARCH=ARM; # could be ARM MIPS X86EM ... PLATFORM="Pocket PC 2003"; # or "Pocket PC 2002" if test "$doWince" != "yes"; then # If !yes then the user specified something # Reset ARCH to allow user to skip specifying it ARCH= eval `echo $doWince | awk -F, '{ \ if (length([$]1)) { printf "CEVERSION=\"%s\"\n", [$]1; \ if ([$]1 < 400) { printf "PLATFORM=\"Pocket PC 2002\"\n" } }; \ if (length([$]2)) { printf "TARGETCPU=\"%s\"\n", toupper([$]2) }; \ if (length([$]3)) { printf "ARCH=\"%s\"\n", toupper([$]3) }; \ if (length([$]4)) { printf "PLATFORM=\"%s\"\n", [$]4 }; \ }'` if test "x${ARCH}" = "x" ; then ARCH=$TARGETCPU; fi fi OSVERSION=WCE$CEVERSION; if test "x${WCEROOT}" = "x" ; then WCEROOT="C:/Program Files/Microsoft eMbedded C++ 4.0" if test ! -d "${WCEROOT}" ; then WCEROOT="C:/Program Files/Microsoft eMbedded Tools" fi fi if test "x${SDKROOT}" = "x" ; then SDKROOT="C:/Program Files/Windows CE Tools" if test ! -d "${SDKROOT}" ; then SDKROOT="C:/Windows CE Tools" fi fi # Ensure that this path has no spaces to work in autoconf TEA_PATH_NOSPACE(WCEROOT, ${WCEROOT}) TEA_PATH_NOSPACE(SDKROOT, ${SDKROOT}) if test ! -d "${SDKROOT}/${OSVERSION}/${PLATFORM}/Lib/${TARGETCPU}" \ -o ! -d "${WCEROOT}/EVC/${OSVERSION}/bin"; then AC_MSG_ERROR([could not find PocketPC SDK or target compiler to enable WinCE mode [$CEVERSION,$TARGETCPU,$ARCH,$PLATFORM]]) doWince="no" else # We could PATH_NOSPACE these, but that's not important, # as long as we quote them when used. CEINCLUDE="${SDKROOT}/${OSVERSION}/${PLATFORM}/include" if test -d "${CEINCLUDE}/${TARGETCPU}" ; then CEINCLUDE="${CEINCLUDE}/${TARGETCPU}" fi CELIBPATH="${SDKROOT}/${OSVERSION}/${PLATFORM}/Lib/${TARGETCPU}" fi fi if test "$GCC" != "yes" ; then if test "${SHARED_BUILD}" = "0" ; then runtime=-MT else runtime=-MD fi if test "$do64bit" = "yes" ; then # All this magic is necessary for the Win64 SDK RC1 - hobbs CC="${MSSDK}/Bin/Win64/cl.exe" CFLAGS="${CFLAGS} -I${MSSDK}/Include/prerelease \ -I${MSSDK}/Include/Win64/crt \ -I${MSSDK}/Include" RC="${MSSDK}/bin/rc.exe" lflags="-MACHINE:IA64 -LIBPATH:${MSSDK}/Lib/IA64 \ -LIBPATH:${MSSDK}/Lib/Prerelease/IA64 -nologo" LINKBIN="${MSSDK}/bin/win64/link.exe" CFLAGS_DEBUG="-nologo -Zi -Od -W3 ${runtime}d" CFLAGS_OPTIMIZE="-nologo -O2 -W2 ${runtime}" elif test "$doWince" != "no" ; then CEBINROOT="${WCEROOT}/EVC/${OSVERSION}/bin" if test "${TARGETCPU}" = "X86"; then CC="${CEBINROOT}/cl.exe" else CC="${CEBINROOT}/cl${ARCH}.exe" fi CFLAGS="$CFLAGS -I\"${CELIB_DIR}/inc\" -I\"${CEINCLUDE}\"" RC="${WCEROOT}/Common/EVC/bin/rc.exe" arch=`echo ${ARCH} | awk '{print tolower([$]0)}'` defs="${ARCH} _${ARCH}_ ${arch} PALM_SIZE _MT _WINDOWS" if test "${SHARED_BUILD}" = "1" ; then # Static CE builds require static celib as well defs="${defs} _DLL" fi for i in $defs ; do AC_DEFINE_UNQUOTED($i) done AC_DEFINE_UNQUOTED(_WIN32_WCE, $CEVERSION) AC_DEFINE_UNQUOTED(UNDER_CE, $CEVERSION) CFLAGS_DEBUG="-nologo -Zi -Od" CFLAGS_OPTIMIZE="-nologo -Ox" lversion=`echo ${CEVERSION} | sed -e 's/\(.\)\(..\)/\1\.\2/'` lflags="-MACHINE:${ARCH} -LIBPATH:\"${CELIBPATH}\" -subsystem:windowsce,${lversion} -nologo" LINKBIN="${CEBINROOT}/link.exe" AC_SUBST(CELIB_DIR) else RC="rc" lflags="-nologo" LINKBIN="link" CFLAGS_DEBUG="-nologo -Z7 -Od -W3 -WX ${runtime}d" CFLAGS_OPTIMIZE="-nologo -O2 -W2 ${runtime}" fi fi if test "$GCC" = "yes"; then # mingw gcc mode RC="windres" CFLAGS_DEBUG="-g" CFLAGS_OPTIMIZE="-O2 -fomit-frame-pointer" SHLIB_LD="$CC -shared" UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.a' LDFLAGS_CONSOLE="-wl,--subsystem,console ${lflags}" LDFLAGS_WINDOW="-wl,--subsystem,windows ${lflags}" else SHLIB_LD="${LINKBIN} -dll ${lflags}" # link -lib only works when -lib is the first arg STLIB_LD="${LINKBIN} -lib ${lflags}" UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.lib' PATHTYPE=-w # For information on what debugtype is most useful, see: # http://msdn.microsoft.com/library/en-us/dnvc60/html/gendepdebug.asp # This essentially turns it all on. LDFLAGS_DEBUG="-debug:full -debugtype:both -warn:2" LDFLAGS_OPTIMIZE="-release" if test "$doWince" != "no" ; then LDFLAGS_CONSOLE="-link ${lflags}" LDFLAGS_WINDOW=${LDFLAGS_CONSOLE} else LDFLAGS_CONSOLE="-link -subsystem:console ${lflags}" LDFLAGS_WINDOW="-link -subsystem:windows ${lflags}" fi fi SHLIB_LD_LIBS='${LIBS}' SHLIB_SUFFIX=".dll" SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.dll' TCL_LIB_VERSIONS_OK=nodots # Bogus to avoid getting this turned off DL_OBJS="tclLoadNone.obj" ;; AIX-*) if test "${TCL_THREADS}" = "1" -a "$GCC" != "yes" ; then # AIX requires the _r compiler when gcc isn't being used if test "${CC}" != "cc_r" ; then CC=${CC}_r fi AC_MSG_RESULT([Using $CC for compiling with threads]) fi LIBS="$LIBS -lc" SHLIB_CFLAGS="" SHLIB_SUFFIX=".so" SHLIB_LD_LIBS='${LIBS}' DL_OBJS="tclLoadDl.o" LD_LIBRARY_PATH_VAR="LIBPATH" # AIX v<=4.1 has some different flags than 4.2+ if test "$system" = "AIX-4.1" -o "`uname -v`" -lt "4" ; then #LIBOBJS="$LIBOBJS tclLoadAix.o" AC_LIBOBJ([tclLoadAix]) DL_LIBS="-lld" fi # Check to enable 64-bit flags for compiler/linker on AIX 4+ if test "$do64bit" = "yes" -a "`uname -v`" -gt "3" ; then if test "$GCC" = "yes" ; then AC_MSG_WARN("64bit mode not supported with GCC on $system") else do64bit_ok=yes CFLAGS="$CFLAGS -q64" LDFLAGS="$LDFLAGS -q64" RANLIB="${RANLIB} -X64" AR="${AR} -X64" SHLIB_LD_FLAGS="-b64" fi fi if test "`uname -m`" = "ia64" ; then # AIX-5 uses ELF style dynamic libraries on IA-64, but not PPC SHLIB_LD="/usr/ccs/bin/ld -G -z text" # AIX-5 has dl* in libc.so DL_LIBS="" if test "$GCC" = "yes" ; then LD_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}' else LD_SEARCH_FLAGS='-R${LIB_RUNTIME_DIR}' fi else if test "$GCC" = "yes" ; then SHLIB_LD="gcc -shared" else SHLIB_LD="/bin/ld -bhalt:4 -bM:SRE -bE:lib.exp -H512 -T512 -bnoentry" fi SHLIB_LD="${TCL_SRC_DIR}/unix/ldAix ${SHLIB_LD} ${SHLIB_LD_FLAGS}" DL_LIBS="-ldl" LD_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}' TCL_NEEDS_EXP_FILE=1 TCL_EXPORT_FILE_SUFFIX='${PACKAGE_VERSION}.exp' fi # On AIX <=v4 systems, libbsd.a has to be linked in to support # non-blocking file IO. This library has to be linked in after # the MATH_LIBS or it breaks the pow() function. The way to # insure proper sequencing, is to add it to the tail of MATH_LIBS. # This library also supplies gettimeofday. # # AIX does not have a timezone field in struct tm. When the AIX # bsd library is used, the timezone global and the gettimeofday # methods are to be avoided for timezone deduction instead, we # deduce the timezone by comparing the localtime result on a # known GMT value. AC_CHECK_LIB(bsd, gettimeofday, libbsd=yes, libbsd=no) if test $libbsd = yes; then MATH_LIBS="$MATH_LIBS -lbsd" AC_DEFINE(USE_DELTA_FOR_TZ) fi ;; BeOS*) SHLIB_CFLAGS="-fPIC" SHLIB_LD="${CC} -nostart" SHLIB_LD_LIBS='${LIBS}' SHLIB_SUFFIX=".so" DL_OBJS="tclLoadDl.o" DL_LIBS="-ldl" ;; BSD/OS-2.1*|BSD/OS-3*) SHLIB_CFLAGS="" SHLIB_LD="shlicc -r" SHLIB_LD_LIBS='${LIBS}' SHLIB_SUFFIX=".so" DL_OBJS="tclLoadDl.o" DL_LIBS="-ldl" LD_SEARCH_FLAGS="" ;; BSD/OS-4.*) SHLIB_CFLAGS="-export-dynamic -fPIC" SHLIB_LD="cc -shared" SHLIB_LD_LIBS='${LIBS}' SHLIB_SUFFIX=".so" DL_OBJS="tclLoadDl.o" DL_LIBS="-ldl" LDFLAGS="$LDFLAGS -export-dynamic" LD_SEARCH_FLAGS="" ;; dgux*) SHLIB_CFLAGS="-K PIC" SHLIB_LD="cc -G" SHLIB_LD_LIBS="" SHLIB_SUFFIX=".so" DL_OBJS="tclLoadDl.o" DL_LIBS="-ldl" LD_SEARCH_FLAGS="" ;; HP-UX-*.11.*) # Use updated header definitions where possible AC_DEFINE(_XOPEN_SOURCE_EXTENDED) SHLIB_SUFFIX=".sl" AC_CHECK_LIB(dld, shl_load, tcl_ok=yes, tcl_ok=no) if test "$tcl_ok" = yes; then SHLIB_CFLAGS="+z" SHLIB_LD="ld -b" SHLIB_LD_LIBS='${LIBS}' DL_OBJS="tclLoadShl.o" DL_LIBS="-ldld" LDFLAGS="$LDFLAGS -Wl,-E" LD_SEARCH_FLAGS='-Wl,+s,+b,${LIB_RUNTIME_DIR}:.' LD_LIBRARY_PATH_VAR="SHLIB_PATH" fi if test "$GCC" = "yes" ; then SHLIB_LD="gcc -shared" SHLIB_LD_LIBS='${LIBS}' LD_SEARCH_FLAGS='' fi # Users may want PA-RISC 1.1/2.0 portable code - needs HP cc #CFLAGS="$CFLAGS +DAportable" # Check to enable 64-bit flags for compiler/linker if test "$do64bit" = "yes" ; then if test "$GCC" = "yes" ; then hpux_arch=`${CC} -dumpmachine` case $hpux_arch in hppa64*) # 64-bit gcc in use. Fix flags for GNU ld. do64bit_ok=yes SHLIB_LD="${CC} -shared" SHLIB_LD_LIBS='${LIBS}' LD_SEARCH_FLAGS='' ;; *) AC_MSG_WARN("64bit mode not supported with GCC on $system") ;; esac else do64bit_ok=yes CFLAGS="$CFLAGS +DD64" LDFLAGS="$LDFLAGS +DD64" fi fi ;; HP-UX-*.08.*|HP-UX-*.09.*|HP-UX-*.10.*) SHLIB_SUFFIX=".sl" AC_CHECK_LIB(dld, shl_load, tcl_ok=yes, tcl_ok=no) if test "$tcl_ok" = yes; then SHLIB_CFLAGS="+z" SHLIB_LD="ld -b" SHLIB_LD_LIBS="" DL_OBJS="tclLoadShl.o" DL_LIBS="-ldld" LDFLAGS="$LDFLAGS -Wl,-E" LD_SEARCH_FLAGS='-Wl,+s,+b,${LIB_RUNTIME_DIR}:.' fi LD_LIBRARY_PATH_VAR="SHLIB_PATH" ;; IRIX-4.*) SHLIB_CFLAGS="-G 0" SHLIB_SUFFIX=".a" SHLIB_LD="echo tclLdAout $CC \{$SHLIB_CFLAGS\} | `pwd`/tclsh -r -G 0" SHLIB_LD_LIBS='${LIBS}' DL_OBJS="tclLoadAout.o" DL_LIBS="" LDFLAGS="$LDFLAGS -Wl,-D,08000000" LD_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}' SHARED_LIB_SUFFIX='${PACKAGE_VERSION}.a' ;; IRIX-5.*) SHLIB_CFLAGS="" SHLIB_LD="ld -shared -rdata_shared" SHLIB_LD_LIBS='${LIBS}' SHLIB_SUFFIX=".so" DL_OBJS="tclLoadDl.o" DL_LIBS="" LD_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' ;; IRIX-6.*|IRIX64-6.5*) SHLIB_CFLAGS="" SHLIB_LD="ld -n32 -shared -rdata_shared" SHLIB_LD_LIBS='${LIBS}' SHLIB_SUFFIX=".so" DL_OBJS="tclLoadDl.o" DL_LIBS="" LD_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' if test "$GCC" = "yes" ; then CFLAGS="$CFLAGS -mabi=n32" LDFLAGS="$LDFLAGS -mabi=n32" else case $system in IRIX-6.3) # Use to build 6.2 compatible binaries on 6.3. CFLAGS="$CFLAGS -n32 -D_OLD_TERMIOS" ;; *) CFLAGS="$CFLAGS -n32" ;; esac LDFLAGS="$LDFLAGS -n32" fi ;; IRIX64-6.*) SHLIB_CFLAGS="" SHLIB_LD="ld -n32 -shared -rdata_shared" SHLIB_LD_LIBS='${LIBS}' SHLIB_SUFFIX=".so" DL_OBJS="tclLoadDl.o" DL_LIBS="" LD_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' # Check to enable 64-bit flags for compiler/linker if test "$do64bit" = "yes" ; then if test "$GCC" = "yes" ; then AC_MSG_WARN([64bit mode not supported by gcc]) else do64bit_ok=yes SHLIB_LD="ld -64 -shared -rdata_shared" CFLAGS="$CFLAGS -64" LDFLAGS="$LDFLAGS -64" fi fi ;; Linux*) SHLIB_CFLAGS="-fPIC" SHLIB_LD_LIBS='${LIBS}' SHLIB_SUFFIX=".so" CFLAGS_OPTIMIZE="-O2 -fomit-frame-pointer" # egcs-2.91.66 on Redhat Linux 6.0 generates lots of warnings # when you inline the string and math operations. Turn this off to # get rid of the warnings. #CFLAGS_OPTIMIZE="${CFLAGS_OPTIMIZE} -D__NO_STRING_INLINES -D__NO_MATH_INLINES" if test "$have_dl" = yes; then SHLIB_LD="${CC} -shared" DL_OBJS="tclLoadDl.o" DL_LIBS="-ldl" LDFLAGS="$LDFLAGS -Wl,--export-dynamic" LD_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' else AC_CHECK_HEADER(dld.h, [ SHLIB_LD="ld -shared" DL_OBJS="tclLoadDld.o" DL_LIBS="-ldld" LD_SEARCH_FLAGS=""]) fi if test "`uname -m`" = "alpha" ; then CFLAGS="$CFLAGS -mieee" fi # The combo of gcc + glibc has a bug related # to inlining of functions like strtod(). The # -fno-builtin flag should address this problem # but it does not work. The -fno-inline flag # is kind of overkill but it works. # Disable inlining only when one of the # files in compat/*.c is being linked in. if test x"${USE_COMPAT}" != x ; then CFLAGS="$CFLAGS -fno-inline" fi ;; GNU*) SHLIB_CFLAGS="-fPIC" SHLIB_LD_LIBS='${LIBS}' SHLIB_SUFFIX=".so" if test "$have_dl" = yes; then SHLIB_LD="${CC} -shared" DL_OBJS="" DL_LIBS="-ldl" LDFLAGS="$LDFLAGS -Wl,--export-dynamic" LD_SEARCH_FLAGS="" else AC_CHECK_HEADER(dld.h, [ SHLIB_LD="ld -shared" DL_OBJS="" DL_LIBS="-ldld" LD_SEARCH_FLAGS=""]) fi if test "`uname -m`" = "alpha" ; then CFLAGS="$CFLAGS -mieee" fi ;; MP-RAS-02*) SHLIB_CFLAGS="-K PIC" SHLIB_LD="cc -G" SHLIB_LD_LIBS="" SHLIB_SUFFIX=".so" DL_OBJS="tclLoadDl.o" DL_LIBS="-ldl" LD_SEARCH_FLAGS="" ;; MP-RAS-*) SHLIB_CFLAGS="-K PIC" SHLIB_LD="cc -G" SHLIB_LD_LIBS="" SHLIB_SUFFIX=".so" DL_OBJS="tclLoadDl.o" DL_LIBS="-ldl" LDFLAGS="$LDFLAGS -Wl,-Bexport" LD_SEARCH_FLAGS="" ;; NetBSD-*|FreeBSD-[[1-2]].*) # Not available on all versions: check for include file. AC_CHECK_HEADER(dlfcn.h, [ # NetBSD/SPARC needs -fPIC, -fpic will not do. SHLIB_CFLAGS="-fPIC" SHLIB_LD="ld -Bshareable -x" SHLIB_LD_LIBS="" SHLIB_SUFFIX=".so" DL_OBJS="tclLoadDl.o" DL_LIBS="" LD_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' AC_MSG_CHECKING([for ELF]) AC_EGREP_CPP(yes, [ #ifdef __ELF__ yes #endif ], AC_MSG_RESULT([yes]) SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.so', AC_MSG_RESULT([no]) SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.so.1.0' ) ], [ SHLIB_CFLAGS="" SHLIB_LD="echo tclLdAout $CC \{$SHLIB_CFLAGS\} | `pwd`/tclsh -r" SHLIB_LD_LIBS='${LIBS}' SHLIB_SUFFIX=".a" DL_OBJS="tclLoadAout.o" DL_LIBS="" LD_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}' SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.a' ]) # FreeBSD doesn't handle version numbers with dots. UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.a' TCL_LIB_VERSIONS_OK=nodots ;; OpenBSD-*) SHLIB_LD="${CC} -shared" SHLIB_LD_LIBS='${LIBS}' SHLIB_SUFFIX=".so" DL_OBJS="tclLoadDl.o" DL_LIBS="" LD_SEARCH_FLAGS="" AC_MSG_CHECKING(for ELF) AC_EGREP_CPP(yes, [ #ifdef __ELF__ yes #endif ], [AC_MSG_RESULT(yes) SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.so.1.0'], [AC_MSG_RESULT(no) SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.so.1.0'] ) # OpenBSD doesn't do version numbers with dots. UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.a' TCL_LIB_VERSIONS_OK=nodots ;; FreeBSD-*) # FreeBSD 3.* and greater have ELF. SHLIB_CFLAGS="-fPIC" SHLIB_LD="ld -Bshareable -x" SHLIB_LD_LIBS='${LIBS}' SHLIB_SUFFIX=".so" DL_OBJS="tclLoadDl.o" DL_LIBS="" LDFLAGS="$LDFLAGS -export-dynamic" LD_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}' if test "${TCL_THREADS}" = "1" ; then # The -pthread needs to go in the CFLAGS, not LIBS LIBS=`echo $LIBS | sed s/-pthread//` CFLAGS="$CFLAGS -pthread" LDFLAGS="$LDFLAGS -pthread" fi case $system in FreeBSD-3.*) # FreeBSD-3 doesn't handle version numbers with dots. UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.a' SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.so' TCL_LIB_VERSIONS_OK=nodots ;; esac ;; Darwin-*) SHLIB_CFLAGS="-fno-common" SHLIB_LD="cc -dynamiclib \${LDFLAGS}" SHLIB_LD_LIBS='${LIBS}' SHLIB_SUFFIX=".dylib" DL_OBJS="tclLoadDyld.o" DL_LIBS="" LDFLAGS="$LDFLAGS -prebind -Wl,-search_paths_first" LD_SEARCH_FLAGS="" LD_LIBRARY_PATH_VAR="DYLD_LIBRARY_PATH" CFLAGS_OPTIMIZE="-Os" ;; NEXTSTEP-*) SHLIB_CFLAGS="" SHLIB_LD="cc -nostdlib -r" SHLIB_LD_LIBS="" SHLIB_SUFFIX=".so" DL_OBJS="tclLoadNext.o" DL_LIBS="" LD_SEARCH_FLAGS="" ;; OS/390-*) CFLAGS_OPTIMIZE="" # Optimizer is buggy AC_DEFINE(_OE_SOCKETS) # needed in sys/socket.h ;; OSF1-1.0|OSF1-1.1|OSF1-1.2) # OSF/1 1.[012] from OSF, and derivatives, including Paragon OSF/1 SHLIB_CFLAGS="" # Hack: make package name same as library name SHLIB_LD='ld -R -export $@:' SHLIB_LD_LIBS="" SHLIB_SUFFIX=".so" DL_OBJS="tclLoadOSF.o" DL_LIBS="" LD_SEARCH_FLAGS="" ;; OSF1-1.*) # OSF/1 1.3 from OSF using ELF, and derivatives, including AD2 SHLIB_CFLAGS="-fPIC" if test "$SHARED_BUILD" = "1" ; then SHLIB_LD="ld -shared" else SHLIB_LD="ld -non_shared" fi SHLIB_LD_LIBS="" SHLIB_SUFFIX=".so" DL_OBJS="tclLoadDl.o" DL_LIBS="" LD_SEARCH_FLAGS="" ;; OSF1-V*) # Digital OSF/1 SHLIB_CFLAGS="" if test "$SHARED_BUILD" = "1" ; then SHLIB_LD='ld -shared -expect_unresolved "*"' else SHLIB_LD='ld -non_shared -expect_unresolved "*"' fi SHLIB_LD_LIBS="" SHLIB_SUFFIX=".so" DL_OBJS="tclLoadDl.o" DL_LIBS="" LD_SEARCH_FLAGS='-rpath ${LIB_RUNTIME_DIR}' if test "$GCC" = "yes" ; then CFLAGS="$CFLAGS -mieee" else CFLAGS="$CFLAGS -DHAVE_TZSET -std1 -ieee" fi # see pthread_intro(3) for pthread support on osf1, k.furukawa if test "${TCL_THREADS}" = "1" ; then CFLAGS="$CFLAGS -DHAVE_PTHREAD_ATTR_SETSTACKSIZE" CFLAGS="$CFLAGS -DTCL_THREAD_STACK_MIN=PTHREAD_STACK_MIN*64" LIBS=`echo $LIBS | sed s/-lpthreads//` if test "$GCC" = "yes" ; then LIBS="$LIBS -lpthread -lmach -lexc" else CFLAGS="$CFLAGS -pthread" LDFLAGS="$LDFLAGS -pthread" fi fi ;; QNX-6*) # QNX RTP # This may work for all QNX, but it was only reported for v6. SHLIB_CFLAGS="-fPIC" SHLIB_LD="ld -Bshareable -x" SHLIB_LD_LIBS="" SHLIB_SUFFIX=".so" DL_OBJS="tclLoadDl.o" # dlopen is in -lc on QNX DL_LIBS="" LD_SEARCH_FLAGS="" ;; RISCos-*) SHLIB_CFLAGS="-G 0" SHLIB_LD="echo tclLdAout $CC \{$SHLIB_CFLAGS\} | `pwd`/tclsh -r -G 0" SHLIB_LD_LIBS='${LIBS}' SHLIB_SUFFIX=".a" DL_OBJS="tclLoadAout.o" DL_LIBS="" LDFLAGS="$LDFLAGS -Wl,-D,08000000" LD_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}' ;; SCO_SV-3.2*) # Note, dlopen is available only on SCO 3.2.5 and greater. However, # this test works, since "uname -s" was non-standard in 3.2.4 and # below. if test "$GCC" = "yes" ; then SHLIB_CFLAGS="-fPIC -melf" LDFLAGS="$LDFLAGS -melf -Wl,-Bexport" else SHLIB_CFLAGS="-Kpic -belf" LDFLAGS="$LDFLAGS -belf -Wl,-Bexport" fi SHLIB_LD="ld -G" SHLIB_LD_LIBS="" SHLIB_SUFFIX=".so" DL_OBJS="tclLoadDl.o" DL_LIBS="" LD_SEARCH_FLAGS="" ;; SINIX*5.4*) SHLIB_CFLAGS="-K PIC" SHLIB_LD="cc -G" SHLIB_LD_LIBS="" SHLIB_SUFFIX=".so" DL_OBJS="tclLoadDl.o" DL_LIBS="-ldl" LD_SEARCH_FLAGS="" ;; SunOS-4*) SHLIB_CFLAGS="-PIC" SHLIB_LD="ld" SHLIB_LD_LIBS="" SHLIB_SUFFIX=".so" DL_OBJS="tclLoadDl.o" DL_LIBS="-ldl" LD_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}' # SunOS can't handle version numbers with dots in them in library # specs, like -ltcl7.5, so use -ltcl75 instead. Also, it # requires an extra version number at the end of .so file names. # So, the library has to have a name like libtcl75.so.1.0 SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.so.1.0' UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.a' TCL_LIB_VERSIONS_OK=nodots ;; SunOS-5.[[0-6]]*) # Note: If _REENTRANT isn't defined, then Solaris # won't define thread-safe library routines. AC_DEFINE(_REENTRANT) AC_DEFINE(_POSIX_PTHREAD_SEMANTICS) SHLIB_CFLAGS="-KPIC" # Note: need the LIBS below, otherwise Tk won't find Tcl's # symbols when dynamically loaded into tclsh. SHLIB_LD_LIBS='${LIBS}' SHLIB_SUFFIX=".so" DL_OBJS="tclLoadDl.o" DL_LIBS="-ldl" if test "$GCC" = "yes" ; then SHLIB_LD="$CC -shared" LD_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}' else SHLIB_LD="/usr/ccs/bin/ld -G -z text" LD_SEARCH_FLAGS='-R ${LIB_RUNTIME_DIR}' fi ;; SunOS-5*) # Note: If _REENTRANT isn't defined, then Solaris # won't define thread-safe library routines. AC_DEFINE(_REENTRANT) AC_DEFINE(_POSIX_PTHREAD_SEMANTICS) SHLIB_CFLAGS="-KPIC" # Check to enable 64-bit flags for compiler/linker if test "$do64bit" = "yes" ; then arch=`isainfo` if test "$arch" = "sparcv9 sparc" ; then if test "$GCC" = "yes" ; then if test "`gcc -dumpversion` | awk -F. '{print $1}'" -lt "3" ; then AC_MSG_WARN([64bit mode not supported with GCC < 3.2 on $system]) else do64bit_ok=yes CFLAGS="$CFLAGS -m64 -mcpu=v9" LDFLAGS="$LDFLAGS -m64 -mcpu=v9" SHLIB_CFLAGS="-fPIC" fi else do64bit_ok=yes if test "$do64bitVIS" = "yes" ; then CFLAGS="$CFLAGS -xarch=v9a" LDFLAGS="$LDFLAGS -xarch=v9a" else CFLAGS="$CFLAGS -xarch=v9" LDFLAGS="$LDFLAGS -xarch=v9" fi fi else AC_MSG_WARN("64bit mode only supported sparcv9 system") fi fi # Note: need the LIBS below, otherwise Tk won't find Tcl's # symbols when dynamically loaded into tclsh. SHLIB_LD_LIBS='${LIBS}' SHLIB_SUFFIX=".so" DL_OBJS="tclLoadDl.o" DL_LIBS="-ldl" if test "$GCC" = "yes" ; then SHLIB_LD="$CC -shared" LD_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}' if test "$do64bit" = "yes" ; then # We need to specify -static-libgcc or we need to # add the path to the sparv9 libgcc. # JH: static-libgcc is necessary for core Tcl, but may # not be necessary for extensions. SHLIB_LD="$SHLIB_LD -m64 -mcpu=v9 -static-libgcc" # for finding sparcv9 libgcc, get the regular libgcc # path, remove so name and append 'sparcv9' #v9gcclibdir="`gcc -print-file-name=libgcc_s.so` | ..." #LD_SEARCH_FLAGS="${LD_SEARCH_FLAGS},-R,$v9gcclibdir" fi else SHLIB_LD="/usr/ccs/bin/ld -G -z text" LD_SEARCH_FLAGS='-R ${LIB_RUNTIME_DIR}' fi ;; ULTRIX-4.*) SHLIB_CFLAGS="-G 0" SHLIB_SUFFIX=".a" SHLIB_LD="echo tclLdAout $CC \{$SHLIB_CFLAGS\} | `pwd`/tclsh -r -G 0" SHLIB_LD_LIBS='${LIBS}' DL_OBJS="tclLoadAout.o" DL_LIBS="" LDFLAGS="$LDFLAGS -Wl,-D,08000000" LD_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}' if test "$GCC" != "yes" ; then CFLAGS="$CFLAGS -DHAVE_TZSET -std1" fi ;; UNIX_SV* | UnixWare-5*) SHLIB_CFLAGS="-KPIC" SHLIB_LD="cc -G" SHLIB_LD_LIBS="" SHLIB_SUFFIX=".so" DL_OBJS="tclLoadDl.o" DL_LIBS="-ldl" # Some UNIX_SV* systems (unixware 1.1.2 for example) have linkers # that don't grok the -Bexport option. Test that it does. hold_ldflags=$LDFLAGS AC_MSG_CHECKING(for ld accepts -Bexport flag) LDFLAGS="$LDFLAGS -Wl,-Bexport" AC_TRY_LINK(, [int i;], [found=yes], [LDFLAGS=$hold_ldflags found=no]) AC_MSG_RESULT([$found]) LD_SEARCH_FLAGS="" ;; esac if test "$do64bit" = "yes" -a "$do64bit_ok" = "no" ; then AC_MSG_WARN("64bit support being disabled -- don\'t know magic for this platform") fi # Step 4: If pseudo-static linking is in use (see K. B. Kenny, "Dynamic # Loading for Tcl -- What Became of It?". Proc. 2nd Tcl/Tk Workshop, # New Orleans, LA, Computerized Processes Unlimited, 1994), then we need # to determine which of several header files defines the a.out file # format (a.out.h, sys/exec.h, or sys/exec_aout.h). At present, we # support only a file format that is more or less version-7-compatible. # In particular, # - a.out files must begin with `struct exec'. # - the N_TXTOFF on the `struct exec' must compute the seek address # of the text segment # - The `struct exec' must contain a_magic, a_text, a_data, a_bss # and a_entry fields. # The following compilation should succeed if and only if either sys/exec.h # or a.out.h is usable for the purpose. # # Note that the modified COFF format used on MIPS Ultrix 4.x is usable; the # `struct exec' includes a second header that contains information that # duplicates the v7 fields that are needed. if test "x$DL_OBJS" = "xtclLoadAout.o" ; then AC_MSG_CHECKING([sys/exec.h]) AC_TRY_COMPILE([#include ],[ struct exec foo; unsigned long seek; int flag; #if defined(__mips) || defined(mips) seek = N_TXTOFF (foo.ex_f, foo.ex_o); #else seek = N_TXTOFF (foo); #endif flag = (foo.a_magic == OMAGIC); return foo.a_text + foo.a_data + foo.a_bss + foo.a_entry; ], tcl_ok=usable, tcl_ok=unusable) AC_MSG_RESULT([$tcl_ok]) if test $tcl_ok = usable; then AC_DEFINE(USE_SYS_EXEC_H) else AC_MSG_CHECKING([a.out.h]) AC_TRY_COMPILE([#include ],[ struct exec foo; unsigned long seek; int flag; #if defined(__mips) || defined(mips) seek = N_TXTOFF (foo.ex_f, foo.ex_o); #else seek = N_TXTOFF (foo); #endif flag = (foo.a_magic == OMAGIC); return foo.a_text + foo.a_data + foo.a_bss + foo.a_entry; ], tcl_ok=usable, tcl_ok=unusable) AC_MSG_RESULT([$tcl_ok]) if test $tcl_ok = usable; then AC_DEFINE(USE_A_OUT_H) else AC_MSG_CHECKING([sys/exec_aout.h]) AC_TRY_COMPILE([#include ],[ struct exec foo; unsigned long seek; int flag; #if defined(__mips) || defined(mips) seek = N_TXTOFF (foo.ex_f, foo.ex_o); #else seek = N_TXTOFF (foo); #endif flag = (foo.a_midmag == OMAGIC); return foo.a_text + foo.a_data + foo.a_bss + foo.a_entry; ], tcl_ok=usable, tcl_ok=unusable) AC_MSG_RESULT([$tcl_ok]) if test $tcl_ok = usable; then AC_DEFINE(USE_SYS_EXEC_AOUT_H) else DL_OBJS="" fi fi fi fi # Step 5: disable dynamic loading if requested via a command-line switch. AC_ARG_ENABLE(load, [ --disable-load disallow dynamic loading and "load" command], [tcl_ok=$enableval], [tcl_ok=yes]) if test "$tcl_ok" = "no"; then DL_OBJS="" fi if test "x$DL_OBJS" != "x" ; then BUILD_DLTEST="\$(DLTEST_TARGETS)" else echo "Can't figure out how to do dynamic loading or shared libraries" echo "on this system." SHLIB_CFLAGS="" SHLIB_LD="" SHLIB_SUFFIX="" DL_OBJS="tclLoadNone.o" DL_LIBS="" LDFLAGS="$LDFLAGS_ORIG" LD_SEARCH_FLAGS="" BUILD_DLTEST="" fi # If we're running gcc, then change the C flags for compiling shared # libraries to the right flags for gcc, instead of those for the # standard manufacturer compiler. if test "$DL_OBJS" != "tclLoadNone.o" ; then if test "$GCC" = "yes" ; then case $system in AIX-*) ;; BSD/OS*) ;; IRIX*) ;; NetBSD-*|FreeBSD-*) ;; Darwin-*) ;; RISCos-*) ;; SCO_SV-3.2*) ;; ULTRIX-4.*) ;; windows) ;; *) SHLIB_CFLAGS="-fPIC" ;; esac fi fi if test "$SHARED_LIB_SUFFIX" = "" ; then SHARED_LIB_SUFFIX='${PACKAGE_VERSION}${SHLIB_SUFFIX}' fi if test "$UNSHARED_LIB_SUFFIX" = "" ; then UNSHARED_LIB_SUFFIX='${PACKAGE_VERSION}.a' fi AC_SUBST(DL_LIBS) AC_SUBST(CFLAGS_DEBUG) AC_SUBST(CFLAGS_OPTIMIZE) AC_SUBST(CFLAGS_WARNING) AC_SUBST(STLIB_LD) AC_SUBST(SHLIB_LD) AC_SUBST(SHLIB_CFLAGS) AC_SUBST(SHLIB_LD_LIBS) AC_SUBST(LDFLAGS_DEBUG) AC_SUBST(LDFLAGS_OPTIMIZE) AC_SUBST(LD_LIBRARY_PATH_VAR) # These must be called after we do the basic CFLAGS checks and # verify any possible 64-bit or similar switches are necessary TEA_TCL_EARLY_FLAGS TEA_TCL_64BIT_FLAGS ]) #-------------------------------------------------------------------- # TEA_SERIAL_PORT # # Determine which interface to use to talk to the serial port. # Note that #include lines must begin in leftmost column for # some compilers to recognize them as preprocessor directives, # and some build environments have stdin not pointing at a # pseudo-terminal (usually /dev/null instead.) # # Arguments: # none # # Results: # # Defines only one of the following vars: # HAVE_SYS_MODEM_H # USE_TERMIOS # USE_TERMIO # USE_SGTTY # #-------------------------------------------------------------------- AC_DEFUN(TEA_SERIAL_PORT, [ AC_CHECK_HEADERS(sys/modem.h) AC_MSG_CHECKING([termios vs. termio vs. sgtty]) AC_CACHE_VAL(tcl_cv_api_serial, [ AC_TRY_RUN([ #include int main() { struct termios t; if (tcgetattr(0, &t) == 0) { cfsetospeed(&t, 0); t.c_cflag |= PARENB | PARODD | CSIZE | CSTOPB; return 0; } return 1; }], tcl_cv_api_serial=termios, tcl_cv_api_serial=no, tcl_cv_api_serial=no) if test $tcl_cv_api_serial = no ; then AC_TRY_RUN([ #include int main() { struct termio t; if (ioctl(0, TCGETA, &t) == 0) { t.c_cflag |= CBAUD | PARENB | PARODD | CSIZE | CSTOPB; return 0; } return 1; }], tcl_cv_api_serial=termio, tcl_cv_api_serial=no, tcl_cv_api_serial=no) fi if test $tcl_cv_api_serial = no ; then AC_TRY_RUN([ #include int main() { struct sgttyb t; if (ioctl(0, TIOCGETP, &t) == 0) { t.sg_ospeed = 0; t.sg_flags |= ODDP | EVENP | RAW; return 0; } return 1; }], tcl_cv_api_serial=sgtty, tcl_cv_api_serial=none, tcl_cv_api_serial=none) fi if test $tcl_cv_api_serial = no ; then AC_TRY_RUN([ #include #include int main() { struct termios t; if (tcgetattr(0, &t) == 0 || errno == ENOTTY || errno == ENXIO || errno == EINVAL) { cfsetospeed(&t, 0); t.c_cflag |= PARENB | PARODD | CSIZE | CSTOPB; return 0; } return 1; }], tcl_cv_api_serial=termios, tcl_cv_api_serial=no, tcl_cv_api_serial=no) fi if test $tcl_cv_api_serial = no; then AC_TRY_RUN([ #include #include int main() { struct termio t; if (ioctl(0, TCGETA, &t) == 0 || errno == ENOTTY || errno == ENXIO || errno == EINVAL) { t.c_cflag |= CBAUD | PARENB | PARODD | CSIZE | CSTOPB; return 0; } return 1; }], tcl_cv_api_serial=termio, tcl_cv_api_serial=no, tcl_cv_api_serial=no) fi if test $tcl_cv_api_serial = no; then AC_TRY_RUN([ #include #include int main() { struct sgttyb t; if (ioctl(0, TIOCGETP, &t) == 0 || errno == ENOTTY || errno == ENXIO || errno == EINVAL) { t.sg_ospeed = 0; t.sg_flags |= ODDP | EVENP | RAW; return 0; } return 1; }], tcl_cv_api_serial=sgtty, tcl_cv_api_serial=none, tcl_cv_api_serial=none) fi]) case $tcl_cv_api_serial in termios) AC_DEFINE(USE_TERMIOS);; termio) AC_DEFINE(USE_TERMIO);; sgtty) AC_DEFINE(USE_SGTTY);; esac AC_MSG_RESULT([$tcl_cv_api_serial]) ]) #-------------------------------------------------------------------- # TEA_MISSING_POSIX_HEADERS # # Supply substitutes for missing POSIX header files. Special # notes: # - stdlib.h doesn't define strtol, strtoul, or # strtod insome versions of SunOS # - some versions of string.h don't declare procedures such # as strstr # # Arguments: # none # # Results: # # Defines some of the following vars: # NO_DIRENT_H # NO_ERRNO_H # NO_VALUES_H # HAVE_LIMITS_H or NO_LIMITS_H # NO_STDLIB_H # NO_STRING_H # NO_SYS_WAIT_H # NO_DLFCN_H # HAVE_SYS_PARAM_H # # HAVE_STRING_H ? # # tkUnixPort.h checks for HAVE_LIMITS_H, so do both HAVE and # CHECK on limits.h #-------------------------------------------------------------------- AC_DEFUN(TEA_MISSING_POSIX_HEADERS, [ AC_MSG_CHECKING([dirent.h]) AC_TRY_LINK([#include #include ], [ #ifndef _POSIX_SOURCE # ifdef __Lynx__ /* * Generate compilation error to make the test fail: Lynx headers * are only valid if really in the POSIX environment. */ missing_procedure(); # endif #endif DIR *d; struct dirent *entryPtr; char *p; d = opendir("foobar"); entryPtr = readdir(d); p = entryPtr->d_name; closedir(d); ], tcl_ok=yes, tcl_ok=no) if test $tcl_ok = no; then AC_DEFINE(NO_DIRENT_H) fi AC_MSG_RESULT([$tcl_ok]) AC_CHECK_HEADER(errno.h, , [AC_DEFINE(NO_ERRNO_H)]) AC_CHECK_HEADER(float.h, , [AC_DEFINE(NO_FLOAT_H)]) AC_CHECK_HEADER(values.h, , [AC_DEFINE(NO_VALUES_H)]) AC_CHECK_HEADER(limits.h, [AC_DEFINE(HAVE_LIMITS_H)], [AC_DEFINE(NO_LIMITS_H)]) AC_CHECK_HEADER(stdlib.h, tcl_ok=1, tcl_ok=0) AC_EGREP_HEADER(strtol, stdlib.h, , tcl_ok=0) AC_EGREP_HEADER(strtoul, stdlib.h, , tcl_ok=0) AC_EGREP_HEADER(strtod, stdlib.h, , tcl_ok=0) if test $tcl_ok = 0; then AC_DEFINE(NO_STDLIB_H) fi AC_CHECK_HEADER(string.h, tcl_ok=1, tcl_ok=0) AC_EGREP_HEADER(strstr, string.h, , tcl_ok=0) AC_EGREP_HEADER(strerror, string.h, , tcl_ok=0) # See also memmove check below for a place where NO_STRING_H can be # set and why. if test $tcl_ok = 0; then AC_DEFINE(NO_STRING_H) fi AC_CHECK_HEADER(sys/wait.h, , [AC_DEFINE(NO_SYS_WAIT_H)]) AC_CHECK_HEADER(dlfcn.h, , [AC_DEFINE(NO_DLFCN_H)]) # OS/390 lacks sys/param.h (and doesn't need it, by chance). AC_HAVE_HEADERS(sys/param.h) ]) #-------------------------------------------------------------------- # TEA_PATH_X # # Locate the X11 header files and the X11 library archive. Try # the ac_path_x macro first, but if it doesn't find the X stuff # (e.g. because there's no xmkmf program) then check through # a list of possible directories. Under some conditions the # autoconf macro will return an include directory that contains # no include files, so double-check its result just to be safe. # # This should be called after TEA_CONFIG_CFLAGS as setting the # LIBS line can confuse some configure macro magic. # # Arguments: # none # # Results: # # Sets the following vars: # XINCLUDES # XLIBSW # LIBS (appends to) # TEA_WINDOWINGSYSTEM # #-------------------------------------------------------------------- AC_DEFUN(TEA_PATH_X, [ if test "${TEA_PLATFORM}" = "unix" ; then case ${TK_DEFS} in *MAC_OSX_TK*) AC_DEFINE(MAC_OSX_TK) TEA_WINDOWINGSYSTEM="aqua" ;; *) TEA_PATH_UNIX_X TEA_WINDOWINGSYSTEM="x11" ;; esac elif test "${TEA_PLATFORM}" = "windows" ; then TEA_WINDOWINGSYSTEM="windows" fi ]) AC_DEFUN(TEA_PATH_UNIX_X, [ AC_PATH_X not_really_there="" if test "$no_x" = ""; then if test "$x_includes" = ""; then AC_TRY_CPP([#include ], , not_really_there="yes") else if test ! -r $x_includes/X11/Intrinsic.h; then not_really_there="yes" fi fi fi if test "$no_x" = "yes" -o "$not_really_there" = "yes"; then AC_MSG_CHECKING([for X11 header files]) XINCLUDES="# no special path needed" AC_TRY_CPP([#include ], , XINCLUDES="nope") if test "$XINCLUDES" = nope; then dirs="/usr/unsupported/include /usr/local/include /usr/X386/include /usr/X11R6/include /usr/X11R5/include /usr/include/X11R5 /usr/include/X11R4 /usr/openwin/include /usr/X11/include /usr/sww/include" for i in $dirs ; do if test -r $i/X11/Intrinsic.h; then AC_MSG_RESULT([$i]) XINCLUDES=" -I$i" break fi done fi else if test "$x_includes" != ""; then XINCLUDES=-I$x_includes else XINCLUDES="# no special path needed" fi fi if test "$XINCLUDES" = nope; then AC_MSG_RESULT([could not find any!]) XINCLUDES="# no include files found" fi if test "$no_x" = yes; then AC_MSG_CHECKING([for X11 libraries]) XLIBSW=nope dirs="/usr/unsupported/lib /usr/local/lib /usr/X386/lib /usr/X11R6/lib /usr/X11R5/lib /usr/lib/X11R5 /usr/lib/X11R4 /usr/openwin/lib /usr/X11/lib /usr/sww/X11/lib" for i in $dirs ; do if test -r $i/libX11.a -o -r $i/libX11.so -o -r $i/libX11.sl; then AC_MSG_RESULT([$i]) XLIBSW="-L$i -lX11" x_libraries="$i" break fi done else if test "$x_libraries" = ""; then XLIBSW=-lX11 else XLIBSW="-L$x_libraries -lX11" fi fi if test "$XLIBSW" = nope ; then AC_CHECK_LIB(Xwindow, XCreateWindow, XLIBSW=-lXwindow) fi if test "$XLIBSW" = nope ; then AC_MSG_RESULT([could not find any! Using -lX11.]) XLIBSW=-lX11 fi if test x"${XLIBSW}" != x ; then PKG_LIBS="${PKG_LIBS} ${XLIBSW}" fi ]) #-------------------------------------------------------------------- # TEA_BLOCKING_STYLE # # The statements below check for systems where POSIX-style # non-blocking I/O (O_NONBLOCK) doesn't work or is unimplemented. # On these systems (mostly older ones), use the old BSD-style # FIONBIO approach instead. # # Arguments: # none # # Results: # # Defines some of the following vars: # HAVE_SYS_IOCTL_H # HAVE_SYS_FILIO_H # USE_FIONBIO # O_NONBLOCK # #-------------------------------------------------------------------- AC_DEFUN(TEA_BLOCKING_STYLE, [ AC_CHECK_HEADERS(sys/ioctl.h) AC_CHECK_HEADERS(sys/filio.h) AC_MSG_CHECKING([FIONBIO vs. O_NONBLOCK for nonblocking I/O]) if test -f /usr/lib/NextStep/software_version; then system=NEXTSTEP-`awk '/3/,/3/' /usr/lib/NextStep/software_version` else system=`uname -s`-`uname -r` if test "$?" -ne 0 ; then system=unknown else # Special check for weird MP-RAS system (uname returns weird # results, and the version is kept in special file). if test -r /etc/.relid -a "X`uname -n`" = "X`uname -s`" ; then system=MP-RAS-`awk '{print $3}' /etc/.relid'` fi if test "`uname -s`" = "AIX" ; then system=AIX-`uname -v`.`uname -r` fi fi fi case $system in # There used to be code here to use FIONBIO under AIX. However, it # was reported that FIONBIO doesn't work under AIX 3.2.5. Since # using O_NONBLOCK seems fine under AIX 4.*, I removed the FIONBIO # code (JO, 5/31/97). OSF*) AC_DEFINE(USE_FIONBIO) AC_MSG_RESULT([FIONBIO]) ;; SunOS-4*) AC_DEFINE(USE_FIONBIO) AC_MSG_RESULT([FIONBIO]) ;; ULTRIX-4.*) AC_DEFINE(USE_FIONBIO) AC_MSG_RESULT([FIONBIO]) ;; *) AC_MSG_RESULT([O_NONBLOCK]) ;; esac ]) #-------------------------------------------------------------------- # TEA_TIME_HANLDER # # Checks how the system deals with time.h, what time structures # are used on the system, and what fields the structures have. # # Arguments: # none # # Results: # # Defines some of the following vars: # USE_DELTA_FOR_TZ # HAVE_TM_GMTOFF # HAVE_TM_TZADJ # HAVE_TIMEZONE_VAR # #-------------------------------------------------------------------- AC_DEFUN(TEA_TIME_HANDLER, [ AC_CHECK_HEADERS(sys/time.h) AC_HEADER_TIME AC_STRUCT_TIMEZONE AC_CHECK_FUNCS(gmtime_r localtime_r) AC_MSG_CHECKING([tm_tzadj in struct tm]) AC_CACHE_VAL(tcl_cv_member_tm_tzadj, AC_TRY_COMPILE([#include ], [struct tm tm; tm.tm_tzadj;], tcl_cv_member_tm_tzadj=yes, tcl_cv_member_tm_tzadj=no)) AC_MSG_RESULT([$tcl_cv_member_tm_tzadj]) if test $tcl_cv_member_tm_tzadj = yes ; then AC_DEFINE(HAVE_TM_TZADJ) fi AC_MSG_CHECKING([tm_gmtoff in struct tm]) AC_CACHE_VAL(tcl_cv_member_tm_gmtoff, AC_TRY_COMPILE([#include ], [struct tm tm; tm.tm_gmtoff;], tcl_cv_member_tm_gmtoff=yes, tcl_cv_member_tm_gmtoff=no)) AC_MSG_RESULT([$tcl_cv_member_tm_gmtoff]) if test $tcl_cv_member_tm_gmtoff = yes ; then AC_DEFINE(HAVE_TM_GMTOFF) fi # # Its important to include time.h in this check, as some systems # (like convex) have timezone functions, etc. # AC_MSG_CHECKING([long timezone variable]) AC_CACHE_VAL(tcl_cv_var_timezone, AC_TRY_COMPILE([#include ], [extern long timezone; timezone += 1; exit (0);], tcl_cv_timezone_long=yes, tcl_cv_timezone_long=no)) AC_MSG_RESULT([$tcl_cv_timezone_long]) if test $tcl_cv_timezone_long = yes ; then AC_DEFINE(HAVE_TIMEZONE_VAR) else # # On some systems (eg IRIX 6.2), timezone is a time_t and not a long. # AC_MSG_CHECKING([time_t timezone variable]) AC_CACHE_VAL(tcl_cv_timezone_time, AC_TRY_COMPILE([#include ], [extern time_t timezone; timezone += 1; exit (0);], tcl_cv_timezone_time=yes, tcl_cv_timezone_time=no)) AC_MSG_RESULT([$tcl_cv_timezone_time]) if test $tcl_cv_timezone_time = yes ; then AC_DEFINE(HAVE_TIMEZONE_VAR) fi fi ]) #-------------------------------------------------------------------- # TEA_BUGGY_STRTOD # # Under Solaris 2.4, strtod returns the wrong value for the # terminating character under some conditions. Check for this # and if the problem exists use a substitute procedure # "fixstrtod" (provided by Tcl) that corrects the error. # Also, on Compaq's Tru64 Unix 5.0, # strtod(" ") returns 0.0 instead of a failure to convert. # # Arguments: # none # # Results: # # Might defines some of the following vars: # strtod (=fixstrtod) # #-------------------------------------------------------------------- AC_DEFUN(TEA_BUGGY_STRTOD, [ AC_CHECK_FUNC(strtod, tcl_strtod=1, tcl_strtod=0) if test "$tcl_strtod" = 1; then AC_MSG_CHECKING([for Solaris2.4/Tru64 strtod bugs]) AC_TRY_RUN([ extern double strtod(); int main() { char *string = "NaN", *spaceString = " "; char *term; double value; value = strtod(string, &term); if ((term != string) && (term[-1] == 0)) { exit(1); } value = strtod(spaceString, &term); if (term == (spaceString+1)) { exit(1); } exit(0); }], tcl_ok=1, tcl_ok=0, tcl_ok=0) if test "$tcl_ok" = 1; then AC_MSG_RESULT([ok]) else AC_MSG_RESULT([buggy]) #LIBOBJS="$LIBOBJS fixstrtod.o" AC_LIBOBJ([fixstrtod]) USE_COMPAT=1 AC_DEFINE(strtod, fixstrtod) fi fi ]) #-------------------------------------------------------------------- # TEA_TCL_LINK_LIBS # # Search for the libraries needed to link the Tcl shell. # Things like the math library (-lm) and socket stuff (-lsocket vs. # -lnsl) are dealt with here. # # Arguments: # Requires the following vars to be set in the Makefile: # DL_LIBS # LIBS # MATH_LIBS # # Results: # # Subst's the following var: # TCL_LIBS # MATH_LIBS # # Might append to the following vars: # LIBS # # Might define the following vars: # HAVE_NET_ERRNO_H # #-------------------------------------------------------------------- AC_DEFUN(TEA_TCL_LINK_LIBS, [ #-------------------------------------------------------------------- # On a few very rare systems, all of the libm.a stuff is # already in libc.a. Set compiler flags accordingly. # Also, Linux requires the "ieee" library for math to work # right (and it must appear before "-lm"). #-------------------------------------------------------------------- AC_CHECK_FUNC(sin, MATH_LIBS="", MATH_LIBS="-lm") AC_CHECK_LIB(ieee, main, [MATH_LIBS="-lieee $MATH_LIBS"]) #-------------------------------------------------------------------- # Interactive UNIX requires -linet instead of -lsocket, plus it # needs net/errno.h to define the socket-related error codes. #-------------------------------------------------------------------- AC_CHECK_LIB(inet, main, [LIBS="$LIBS -linet"]) AC_CHECK_HEADER(net/errno.h, AC_DEFINE(HAVE_NET_ERRNO_H)) #-------------------------------------------------------------------- # Check for the existence of the -lsocket and -lnsl libraries. # The order here is important, so that they end up in the right # order in the command line generated by make. Here are some # special considerations: # 1. Use "connect" and "accept" to check for -lsocket, and # "gethostbyname" to check for -lnsl. # 2. Use each function name only once: can't redo a check because # autoconf caches the results of the last check and won't redo it. # 3. Use -lnsl and -lsocket only if they supply procedures that # aren't already present in the normal libraries. This is because # IRIX 5.2 has libraries, but they aren't needed and they're # bogus: they goof up name resolution if used. # 4. On some SVR4 systems, can't use -lsocket without -lnsl too. # To get around this problem, check for both libraries together # if -lsocket doesn't work by itself. #-------------------------------------------------------------------- tcl_checkBoth=0 AC_CHECK_FUNC(connect, tcl_checkSocket=0, tcl_checkSocket=1) if test "$tcl_checkSocket" = 1; then AC_CHECK_FUNC(setsockopt, , [AC_CHECK_LIB(socket, setsockopt, LIBS="$LIBS -lsocket", tcl_checkBoth=1)]) fi if test "$tcl_checkBoth" = 1; then tk_oldLibs=$LIBS LIBS="$LIBS -lsocket -lnsl" AC_CHECK_FUNC(accept, tcl_checkNsl=0, [LIBS=$tk_oldLibs]) fi AC_CHECK_FUNC(gethostbyname, , [AC_CHECK_LIB(nsl, gethostbyname, [LIBS="$LIBS -lnsl"])]) # Don't perform the eval of the libraries here because DL_LIBS # won't be set until we call TEA_CONFIG_CFLAGS TCL_LIBS='${DL_LIBS} ${LIBS} ${MATH_LIBS}' AC_SUBST(TCL_LIBS) AC_SUBST(MATH_LIBS) ]) #-------------------------------------------------------------------- # TEA_TCL_EARLY_FLAGS # # Check for what flags are needed to be passed so the correct OS # features are available. # # Arguments: # None # # Results: # # Might define the following vars: # _ISOC99_SOURCE # _LARGEFILE64_SOURCE # #-------------------------------------------------------------------- AC_DEFUN(TEA_TCL_EARLY_FLAG,[ AC_CACHE_VAL([tcl_cv_flag_]translit($1,[A-Z],[a-z]), AC_TRY_COMPILE([$2], $3, [tcl_cv_flag_]translit($1,[A-Z],[a-z])=no, AC_TRY_COMPILE([[#define ]$1[ 1 ]$2], $3, [tcl_cv_flag_]translit($1,[A-Z],[a-z])=yes, [tcl_cv_flag_]translit($1,[A-Z],[a-z])=no))) if test ["x${tcl_cv_flag_]translit($1,[A-Z],[a-z])[}" = "xyes"] ; then AC_DEFINE($1) tcl_flags="$tcl_flags $1" fi ]) AC_DEFUN(TEA_TCL_EARLY_FLAGS,[ AC_MSG_CHECKING([for required early compiler flags]) tcl_flags="" TEA_TCL_EARLY_FLAG(_ISOC99_SOURCE,[#include ], [char *p = (char *)strtoll; char *q = (char *)strtoull;]) TEA_TCL_EARLY_FLAG(_LARGEFILE64_SOURCE,[#include ], [struct stat64 buf; int i = stat64("/", &buf);]) if test "x${tcl_flags}" = "x" ; then AC_MSG_RESULT([none]) else AC_MSG_RESULT([${tcl_flags}]) fi ]) #-------------------------------------------------------------------- # TEA_TCL_64BIT_FLAGS # # Check for what is defined in the way of 64-bit features. # # Arguments: # None # # Results: # # Might define the following vars: # TCL_WIDE_INT_IS_LONG # TCL_WIDE_INT_TYPE # HAVE_STRUCT_DIRENT64 # HAVE_STRUCT_STAT64 # HAVE_TYPE_OFF64_T # #-------------------------------------------------------------------- AC_DEFUN(TEA_TCL_64BIT_FLAGS, [ AC_MSG_CHECKING([for 64-bit integer type]) AC_CACHE_VAL(tcl_cv_type_64bit,[ tcl_cv_type_64bit=none # See if the compiler knows natively about __int64 AC_TRY_COMPILE(,[__int64 value = (__int64) 0;], tcl_type_64bit=__int64, tcl_type_64bit="long long") # See if we should use long anyway Note that we substitute in the # type that is our current guess for a 64-bit type inside this check # program, so it should be modified only carefully... AC_TRY_COMPILE(,[switch (0) { case 1: case (sizeof(]${tcl_type_64bit}[)==sizeof(long)): ; }],tcl_cv_type_64bit=${tcl_type_64bit})]) if test "${tcl_cv_type_64bit}" = none ; then AC_DEFINE(TCL_WIDE_INT_IS_LONG) AC_MSG_RESULT([using long]) elif test "${tcl_cv_type_64bit}" = "__int64" ; then # We actually want to use the default tcl.h checks in this # case to handle both TCL_WIDE_INT_TYPE and TCL_LL_MODIFIER* AC_MSG_RESULT([using Tcl header defaults]) else AC_DEFINE_UNQUOTED(TCL_WIDE_INT_TYPE,${tcl_cv_type_64bit}) AC_MSG_RESULT([${tcl_cv_type_64bit}]) # Now check for auxiliary declarations AC_MSG_CHECKING([for struct dirent64]) AC_CACHE_VAL(tcl_cv_struct_dirent64,[ AC_TRY_COMPILE([#include #include ],[struct dirent64 p;], tcl_cv_struct_dirent64=yes,tcl_cv_struct_dirent64=no)]) if test "x${tcl_cv_struct_dirent64}" = "xyes" ; then AC_DEFINE(HAVE_STRUCT_DIRENT64) fi AC_MSG_RESULT([${tcl_cv_struct_dirent64}]) AC_MSG_CHECKING([for struct stat64]) AC_CACHE_VAL(tcl_cv_struct_stat64,[ AC_TRY_COMPILE([#include ],[struct stat64 p; ], tcl_cv_struct_stat64=yes,tcl_cv_struct_stat64=no)]) if test "x${tcl_cv_struct_stat64}" = "xyes" ; then AC_DEFINE(HAVE_STRUCT_STAT64) fi AC_MSG_RESULT([${tcl_cv_struct_stat64}]) AC_MSG_CHECKING([for off64_t]) AC_CACHE_VAL(tcl_cv_type_off64_t,[ AC_TRY_COMPILE([#include ],[off64_t offset; ], tcl_cv_type_off64_t=yes,tcl_cv_type_off64_t=no)]) if test "x${tcl_cv_type_off64_t}" = "xyes" ; then AC_DEFINE(HAVE_TYPE_OFF64_T) fi AC_MSG_RESULT([${tcl_cv_type_off64_t}]) fi ]) ## ## Here ends the standard Tcl configuration bits and starts the ## TEA specific functions ## #------------------------------------------------------------------------ # TEA_INIT -- # # Init various Tcl Extension Architecture (TEA) variables. # This should be the first called TEA_* macro. # # Arguments: # none # # Results: # # Defines and substs the following vars: # CYGPATH # EXEEXT # Defines only: # TEA_INITED # TEA_PLATFORM (windows or unix) # # "cygpath" is used on windows to generate native path names for include # files. These variables should only be used with the compiler and linker # since they generate native path names. # # EXEEXT # Select the executable extension based on the host type. This # is a lightweight replacement for AC_EXEEXT that doesn't require # a compiler. #------------------------------------------------------------------------ AC_DEFUN(TEA_INIT, [ # TEA extensions pass this us the version of TEA they think they # are compatible with. TEA_VERSION="3.2" AC_MSG_CHECKING([for correct TEA configuration]) if test x"${PACKAGE_NAME}" = x ; then AC_MSG_ERROR([ The PACKAGE_NAME variable must be defined by your TEA configure.in]) fi if test x"$1" = x ; then AC_MSG_ERROR([ TEA version not specified.]) elif test "$1" != "${TEA_VERSION}" ; then AC_MSG_RESULT([warning: requested TEA version "$1", have "${TEA_VERSION}"]) else AC_MSG_RESULT([ok (TEA ${TEA_VERSION})]) fi case "`uname -s`" in *win32*|*WIN32*|*CYGWIN_NT*|*CYGWIN_9*|*CYGWIN_ME*|*MINGW32_*) AC_CHECK_PROG(CYGPATH, cygpath, cygpath -w, echo) EXEEXT=".exe" TEA_PLATFORM="windows" ;; *) CYGPATH=echo EXEEXT="" TEA_PLATFORM="unix" ;; esac # Check if exec_prefix is set. If not use fall back to prefix. # Note when adjusted, so that TEA_PREFIX can correct for this. # This is needed for recursive configures, since autoconf propagates # $prefix, but not $exec_prefix (doh!). if test x$exec_prefix = xNONE ; then exec_prefix_default=yes exec_prefix=$prefix fi AC_SUBST(EXEEXT) AC_SUBST(CYGPATH) # This package name must be replaced statically for AC_SUBST to work AC_SUBST(PKG_LIB_FILE) # Substitute STUB_LIB_FILE in case package creates a stub library too. AC_SUBST(PKG_STUB_LIB_FILE) # We AC_SUBST these here to ensure they are subst'ed, # in case the user doesn't call TEA_ADD_... AC_SUBST(PKG_STUB_SOURCES) AC_SUBST(PKG_STUB_OBJECTS) AC_SUBST(PKG_TCL_SOURCES) AC_SUBST(PKG_HEADERS) AC_SUBST(PKG_INCLUDES) AC_SUBST(PKG_LIBS) AC_SUBST(PKG_CFLAGS) ]) #------------------------------------------------------------------------ # TEA_ADD_SOURCES -- # # Specify one or more source files. Users should check for # the right platform before adding to their list. # It is not important to specify the directory, as long as it is # in the generic, win or unix subdirectory of $(srcdir). # # Arguments: # one or more file names # # Results: # # Defines and substs the following vars: # PKG_SOURCES # PKG_OBJECTS #------------------------------------------------------------------------ AC_DEFUN(TEA_ADD_SOURCES, [ vars="$@" for i in $vars; do case $i in [\$]*) # allow $-var names PKG_SOURCES="$PKG_SOURCES $i" PKG_OBJECTS="$PKG_OBJECTS $i" ;; *) # check for existence - allows for generic/win/unix VPATH if test ! -f "${srcdir}/$i" -a ! -f "${srcdir}/generic/$i" \ -a ! -f "${srcdir}/win/$i" -a ! -f "${srcdir}/unix/$i" \ ; then AC_MSG_ERROR([could not find source file '$i']) fi PKG_SOURCES="$PKG_SOURCES $i" # this assumes it is in a VPATH dir i=`basename $i` # handle user calling this before or after TEA_SETUP_COMPILER if test x"${OBJEXT}" != x ; then j="`echo $i | sed -e 's/\.[[^.]]*$//'`.${OBJEXT}" else j="`echo $i | sed -e 's/\.[[^.]]*$//'`.\${OBJEXT}" fi PKG_OBJECTS="$PKG_OBJECTS $j" ;; esac done AC_SUBST(PKG_SOURCES) AC_SUBST(PKG_OBJECTS) ]) #------------------------------------------------------------------------ # TEA_ADD_STUB_SOURCES -- # # Specify one or more source files. Users should check for # the right platform before adding to their list. # It is not important to specify the directory, as long as it is # in the generic, win or unix subdirectory of $(srcdir). # # Arguments: # one or more file names # # Results: # # Defines and substs the following vars: # PKG_STUB_SOURCES # PKG_STUB_OBJECTS #------------------------------------------------------------------------ AC_DEFUN(TEA_ADD_STUB_SOURCES, [ vars="$@" for i in $vars; do # check for existence - allows for generic/win/unix VPATH if test ! -f "${srcdir}/$i" -a ! -f "${srcdir}/generic/$i" \ -a ! -f "${srcdir}/win/$i" -a ! -f "${srcdir}/unix/$i" \ ; then AC_MSG_ERROR([could not find stub source file '$i']) fi PKG_STUB_SOURCES="$PKG_STUB_SOURCES $i" # this assumes it is in a VPATH dir i=`basename $i` # handle user calling this before or after TEA_SETUP_COMPILER if test x"${OBJEXT}" != x ; then j="`echo $i | sed -e 's/\.[[^.]]*$//'`.${OBJEXT}" else j="`echo $i | sed -e 's/\.[[^.]]*$//'`.\${OBJEXT}" fi PKG_STUB_OBJECTS="$PKG_STUB_OBJECTS $j" done AC_SUBST(PKG_STUB_SOURCES) AC_SUBST(PKG_STUB_OBJECTS) ]) #------------------------------------------------------------------------ # TEA_ADD_TCL_SOURCES -- # # Specify one or more Tcl source files. These should be platform # independent runtime files. # # Arguments: # one or more file names # # Results: # # Defines and substs the following vars: # PKG_TCL_SOURCES #------------------------------------------------------------------------ AC_DEFUN(TEA_ADD_TCL_SOURCES, [ vars="$@" for i in $vars; do # check for existence, be strict because it is installed if test ! -f "${srcdir}/$i" ; then AC_MSG_ERROR([could not find tcl source file '${srcdir}/$i']) fi PKG_TCL_SOURCES="$PKG_TCL_SOURCES $i" done AC_SUBST(PKG_TCL_SOURCES) ]) #------------------------------------------------------------------------ # TEA_ADD_HEADERS -- # # Specify one or more source headers. Users should check for # the right platform before adding to their list. # # Arguments: # one or more file names # # Results: # # Defines and substs the following vars: # PKG_HEADERS #------------------------------------------------------------------------ AC_DEFUN(TEA_ADD_HEADERS, [ vars="$@" for i in $vars; do # check for existence, be strict because it is installed if test ! -f "${srcdir}/$i" ; then AC_MSG_ERROR([could not find header file '${srcdir}/$i']) fi PKG_HEADERS="$PKG_HEADERS $i" done AC_SUBST(PKG_HEADERS) ]) #------------------------------------------------------------------------ # TEA_ADD_INCLUDES -- # # Specify one or more include dirs. Users should check for # the right platform before adding to their list. # # Arguments: # one or more file names # # Results: # # Defines and substs the following vars: # PKG_INCLUDES #------------------------------------------------------------------------ AC_DEFUN(TEA_ADD_INCLUDES, [ vars="$@" for i in $vars; do PKG_INCLUDES="$PKG_INCLUDES $i" done AC_SUBST(PKG_INCLUDES) ]) #------------------------------------------------------------------------ # TEA_ADD_LIBS -- # # Specify one or more libraries. Users should check for # the right platform before adding to their list. For Windows, # libraries provided in "foo.lib" format will be converted to # "-lfoo" when using GCC (mingw). # # Arguments: # one or more file names # # Results: # # Defines and substs the following vars: # PKG_LIBS #------------------------------------------------------------------------ AC_DEFUN(TEA_ADD_LIBS, [ vars="$@" for i in $vars; do if test "${TEA_PLATFORM}" = "windows" -a "$GCC" = "yes" ; then # Convert foo.lib to -lfoo for GCC. No-op if not *.lib i=`echo "$i" | sed -e 's/^\([[^-]].*\)\.lib[$]/-l\1/i'` fi PKG_LIBS="$PKG_LIBS $i" done AC_SUBST(PKG_LIBS) ]) #------------------------------------------------------------------------ # TEA_ADD_CFLAGS -- # # Specify one or more CFLAGS. Users should check for # the right platform before adding to their list. # # Arguments: # one or more file names # # Results: # # Defines and substs the following vars: # PKG_CFLAGS #------------------------------------------------------------------------ AC_DEFUN(TEA_ADD_CFLAGS, [ PKG_CFLAGS="$PKG_CFLAGS $@" AC_SUBST(PKG_CFLAGS) ]) #------------------------------------------------------------------------ # TEA_PREFIX -- # # Handle the --prefix=... option by defaulting to what Tcl gave # # Arguments: # none # # Results: # # If --prefix or --exec-prefix was not specified, $prefix and # $exec_prefix will be set to the values given to Tcl when it was # configured. #------------------------------------------------------------------------ AC_DEFUN(TEA_PREFIX, [ if test "${prefix}" = "NONE"; then prefix_default=yes if test x"${TCL_PREFIX}" != x; then AC_MSG_NOTICE([--prefix defaulting to TCL_PREFIX ${TCL_PREFIX}]) prefix=${TCL_PREFIX} else AC_MSG_NOTICE([--prefix defaulting to /usr/local]) prefix=/usr/local fi fi if test "${exec_prefix}" = "NONE" -a x"${prefix_default}" = x"yes" \ -o x"${exec_prefix_default}" = x"yes" ; then if test x"${TCL_EXEC_PREFIX}" != x; then AC_MSG_NOTICE([--exec-prefix defaulting to TCL_EXEC_PREFIX ${TCL_EXEC_PREFIX}]) exec_prefix=${TCL_EXEC_PREFIX} else AC_MSG_NOTICE([--exec-prefix defaulting to ${prefix}]) exec_prefix=$prefix fi fi ]) #------------------------------------------------------------------------ # TEA_SETUP_COMPILER_CC -- # # Do compiler checks the way we want. This is just a replacement # for AC_PROG_CC in TEA configure.in files to make them cleaner. # # Arguments: # none # # Results: # # Sets up CC var and other standard bits we need to make executables. #------------------------------------------------------------------------ AC_DEFUN(TEA_SETUP_COMPILER_CC, [ # Don't put any macros that use the compiler (e.g. AC_TRY_COMPILE) # in this macro, they need to go into TEA_SETUP_COMPILER instead. # If the user did not set CFLAGS, set it now to keep # the AC_PROG_CC macro from adding "-g -O2". if test "${CFLAGS+set}" != "set" ; then CFLAGS="" fi AC_PROG_CC AC_PROG_CPP AC_PROG_INSTALL #-------------------------------------------------------------------- # Checks to see if the make program sets the $MAKE variable. #-------------------------------------------------------------------- AC_PROG_MAKE_SET #-------------------------------------------------------------------- # Find ranlib #-------------------------------------------------------------------- AC_PROG_RANLIB #-------------------------------------------------------------------- # Determines the correct binary file extension (.o, .obj, .exe etc.) #-------------------------------------------------------------------- AC_OBJEXT AC_EXEEXT ]) #------------------------------------------------------------------------ # TEA_SETUP_COMPILER -- # # Do compiler checks that use the compiler. This must go after # TEA_SETUP_COMPILER_CC, which does the actual compiler check. # # Arguments: # none # # Results: # # Sets up CC var and other standard bits we need to make executables. #------------------------------------------------------------------------ AC_DEFUN(TEA_SETUP_COMPILER, [ # Any macros that use the compiler (e.g. AC_TRY_COMPILE) have to go here. AC_REQUIRE([TEA_SETUP_COMPILER_CC]) #------------------------------------------------------------------------ # If we're using GCC, see if the compiler understands -pipe. If so, use it. # It makes compiling go faster. (This is only a performance feature.) #------------------------------------------------------------------------ if test -z "$no_pipe" -a -n "$GCC"; then AC_MSG_CHECKING([if the compiler understands -pipe]) OLDCC="$CC" CC="$CC -pipe" AC_TRY_COMPILE(,, AC_MSG_RESULT([yes]), CC="$OLDCC" AC_MSG_RESULT([no])) fi #-------------------------------------------------------------------- # Common compiler flag setup #-------------------------------------------------------------------- AC_C_BIGENDIAN if test "${TEA_PLATFORM}" = "unix" ; then TEA_TCL_LINK_LIBS TEA_MISSING_POSIX_HEADERS # Let the user call this, because if it triggers, they will # need a compat/strtod.c that is correct. Users can also # use Tcl_GetDouble(FromObj) instead. #TEA_BUGGY_STRTOD fi ]) #------------------------------------------------------------------------ # TEA_MAKE_LIB -- # # Generate a line that can be used to build a shared/unshared library # in a platform independent manner. # # Arguments: # none # # Requires: # # Results: # # Defines the following vars: # CFLAGS - Done late here to note disturb other AC macros # MAKE_LIB - Command to execute to build the Tcl library; # differs depending on whether or not Tcl is being # compiled as a shared library. # MAKE_SHARED_LIB Makefile rule for building a shared library # MAKE_STATIC_LIB Makefile rule for building a static library # MAKE_STUB_LIB Makefile rule for building a stub library #------------------------------------------------------------------------ AC_DEFUN(TEA_MAKE_LIB, [ if test "${TEA_PLATFORM}" = "windows" -a "$GCC" != "yes"; then MAKE_STATIC_LIB="\${STLIB_LD} -out:\[$]@ \$(PKG_OBJECTS)" MAKE_SHARED_LIB="\${SHLIB_LD} \${SHLIB_LD_LIBS} \${LDFLAGS_DEFAULT} -out:\[$]@ \$(PKG_OBJECTS)" MAKE_STUB_LIB="\${STLIB_LD} -out:\[$]@ \$(PKG_STUB_OBJECTS)" else MAKE_STATIC_LIB="\${STLIB_LD} \[$]@ \$(PKG_OBJECTS)" MAKE_SHARED_LIB="\${SHLIB_LD} -o \[$]@ \$(PKG_OBJECTS) \${SHLIB_LD_LIBS}" MAKE_STUB_LIB="\${STLIB_LD} \[$]@ \$(PKG_STUB_OBJECTS)" fi if test "${SHARED_BUILD}" = "1" ; then MAKE_LIB="${MAKE_SHARED_LIB} " else MAKE_LIB="${MAKE_STATIC_LIB} " fi #-------------------------------------------------------------------- # Shared libraries and static libraries have different names. # Use the double eval to make sure any variables in the suffix is # substituted. (@@@ Might not be necessary anymore) #-------------------------------------------------------------------- if test "${TEA_PLATFORM}" = "windows" ; then if test "${SHARED_BUILD}" = "1" ; then # We force the unresolved linking of symbols that are really in # the private libraries of Tcl and Tk. SHLIB_LD_LIBS="${SHLIB_LD_LIBS} \"`${CYGPATH} ${TCL_BIN_DIR}/${TCL_STUB_LIB_FILE}`\"" if test x"${TK_BIN_DIR}" != x ; then SHLIB_LD_LIBS="${SHLIB_LD_LIBS} \"`${CYGPATH} ${TK_BIN_DIR}/${TK_STUB_LIB_FILE}`\"" fi eval eval "PKG_LIB_FILE=${PACKAGE_NAME}${SHARED_LIB_SUFFIX}" else eval eval "PKG_LIB_FILE=${PACKAGE_NAME}${UNSHARED_LIB_SUFFIX}" fi # Some packages build there own stubs libraries eval eval "PKG_STUB_LIB_FILE=${PACKAGE_NAME}stub${UNSHARED_LIB_SUFFIX}" # These aren't needed on Windows (either MSVC or gcc) RANLIB=: RANLIB_STUB=: else RANLIB_STUB="${RANLIB}" if test "${SHARED_BUILD}" = "1" ; then SHLIB_LD_LIBS="${SHLIB_LD_LIBS} ${TCL_STUB_LIB_SPEC}" if test x"${TK_BIN_DIR}" != x ; then SHLIB_LD_LIBS="${SHLIB_LD_LIBS} ${TK_STUB_LIB_SPEC}" fi eval eval "PKG_LIB_FILE=lib${PACKAGE_NAME}${SHARED_LIB_SUFFIX}" RANLIB=: else eval eval "PKG_LIB_FILE=lib${PACKAGE_NAME}${UNSHARED_LIB_SUFFIX}" fi # Some packages build there own stubs libraries eval eval "PKG_STUB_LIB_FILE=lib${PACKAGE_NAME}stub${UNSHARED_LIB_SUFFIX}" fi # These are escaped so that only CFLAGS is picked up at configure time. # The other values will be substituted at make time. CFLAGS="${CFLAGS} \${CFLAGS_DEFAULT} \${CFLAGS_WARNING}" if test "${SHARED_BUILD}" = "1" ; then CFLAGS="${CFLAGS} \${SHLIB_CFLAGS}" fi AC_SUBST(MAKE_LIB) AC_SUBST(MAKE_SHARED_LIB) AC_SUBST(MAKE_STATIC_LIB) AC_SUBST(MAKE_STUB_LIB) AC_SUBST(RANLIB_STUB) ]) #------------------------------------------------------------------------ # TEA_LIB_SPEC -- # # Compute the name of an existing object library located in libdir # from the given base name and produce the appropriate linker flags. # # Arguments: # basename The base name of the library without version # numbers, extensions, or "lib" prefixes. # extra_dir Extra directory in which to search for the # library. This location is used first, then # $prefix/$exec-prefix, then some defaults. # # Requires: # TEA_INIT and TEA_PREFIX must be called first. # # Results: # # Defines the following vars: # ${basename}_LIB_NAME The computed library name. # ${basename}_LIB_SPEC The computed linker flags. #------------------------------------------------------------------------ AC_DEFUN(TEA_LIB_SPEC, [ AC_MSG_CHECKING([for $1 library]) # Look in exec-prefix for the library (defined by TEA_PREFIX). tea_lib_name_dir="${exec_prefix}/lib" # Or in a user-specified location. if test x"$2" != x ; then tea_extra_lib_dir=$2 else tea_extra_lib_dir=NONE fi for i in \ `ls -dr ${tea_extra_lib_dir}/$1[[0-9]]*.lib 2>/dev/null ` \ `ls -dr ${tea_extra_lib_dir}/lib$1[[0-9]]* 2>/dev/null ` \ `ls -dr ${tea_lib_name_dir}/$1[[0-9]]*.lib 2>/dev/null ` \ `ls -dr ${tea_lib_name_dir}/lib$1[[0-9]]* 2>/dev/null ` \ `ls -dr /usr/lib/$1[[0-9]]*.lib 2>/dev/null ` \ `ls -dr /usr/lib/lib$1[[0-9]]* 2>/dev/null ` \ `ls -dr /usr/local/lib/$1[[0-9]]*.lib 2>/dev/null ` \ `ls -dr /usr/local/lib/lib$1[[0-9]]* 2>/dev/null ` ; do if test -f "$i" ; then tea_lib_name_dir=`dirname $i` $1_LIB_NAME=`basename $i` $1_LIB_PATH_NAME=$i break fi done if test "${TEA_PLATFORM}" = "windows"; then $1_LIB_SPEC=\"`${CYGPATH} ${$1_LIB_PATH_NAME} 2>/dev/null`\" else # Strip off the leading "lib" and trailing ".a" or ".so" tea_lib_name_lib=`echo ${$1_LIB_NAME}|sed -e 's/^lib//' -e 's/\.[[^.]]*$//' -e 's/\.so.*//'` $1_LIB_SPEC="-L${tea_lib_name_dir} -l${tea_lib_name_lib}" fi if test "x${$1_LIB_NAME}" = x ; then AC_MSG_ERROR([not found]) else AC_MSG_RESULT([${$1_LIB_SPEC}]) fi ]) #------------------------------------------------------------------------ # TEA_PRIVATE_TCL_HEADERS -- # # Locate the private Tcl include files # # Arguments: # # Requires: # TCL_SRC_DIR Assumes that TEA_LOAD_TCLCONFIG has # already been called. # # Results: # # Substs the following vars: # TCL_TOP_DIR_NATIVE # TCL_GENERIC_DIR_NATIVE # TCL_UNIX_DIR_NATIVE # TCL_WIN_DIR_NATIVE # TCL_BMAP_DIR_NATIVE # TCL_TOOL_DIR_NATIVE # TCL_PLATFORM_DIR_NATIVE # TCL_BIN_DIR_NATIVE # TCL_INCLUDES #------------------------------------------------------------------------ AC_DEFUN(TEA_PRIVATE_TCL_HEADERS, [ AC_MSG_CHECKING([for Tcl private include files]) if test "${TEA_PLATFORM}" = "windows"; then TCL_TOP_DIR_NATIVE=\"`${CYGPATH} ${TCL_SRC_DIR}`\" TCL_GENERIC_DIR_NATIVE=\"`${CYGPATH} ${TCL_SRC_DIR}/generic`\" TCL_UNIX_DIR_NATIVE=\"`${CYGPATH} ${TCL_SRC_DIR}/unix`\" TCL_WIN_DIR_NATIVE=\"`${CYGPATH} ${TCL_SRC_DIR}/win`\" TCL_BMAP_DIR_NATIVE=\"`${CYGPATH} ${TCL_SRC_DIR}/bitmaps`\" TCL_TOOL_DIR_NATIVE=\"`${CYGPATH} ${TCL_SRC_DIR}/tools`\" TCL_COMPAT_DIR_NATIVE=\"`${CYGPATH} ${TCL_SRC_DIR}/compat`\" TCL_PLATFORM_DIR_NATIVE=${TCL_WIN_DIR_NATIVE} TCL_INCLUDES="-I${TCL_GENERIC_DIR_NATIVE} -I${TCL_PLATFORM_DIR_NATIVE}" else TCL_TOP_DIR_NATIVE='$(TCL_SRC_DIR)' TCL_GENERIC_DIR_NATIVE='${TCL_TOP_DIR_NATIVE}/generic' TCL_UNIX_DIR_NATIVE='${TCL_TOP_DIR_NATIVE}/unix' TCL_WIN_DIR_NATIVE='${TCL_TOP_DIR_NATIVE}/win' TCL_BMAP_DIR_NATIVE='${TCL_TOP_DIR_NATIVE}/bitmaps' TCL_TOOL_DIR_NATIVE='${TCL_TOP_DIR_NATIVE}/tools' TCL_COMPAT_DIR_NATIVE='${TCL_TOP_DIR_NATIVE}/compat' TCL_PLATFORM_DIR_NATIVE=${TCL_UNIX_DIR_NATIVE} # substitute these in "relaxed" so that TCL_INCLUDES still works # without requiring the other vars to be defined in the Makefile eval "TCL_INCLUDES=\"-I${TCL_GENERIC_DIR_NATIVE} -I${TCL_PLATFORM_DIR_NATIVE}\"" fi AC_SUBST(TCL_TOP_DIR_NATIVE) AC_SUBST(TCL_GENERIC_DIR_NATIVE) AC_SUBST(TCL_UNIX_DIR_NATIVE) AC_SUBST(TCL_WIN_DIR_NATIVE) AC_SUBST(TCL_BMAP_DIR_NATIVE) AC_SUBST(TCL_TOOL_DIR_NATIVE) AC_SUBST(TCL_PLATFORM_DIR_NATIVE) AC_SUBST(TCL_INCLUDES) AC_MSG_RESULT([Using srcdir found in tclConfig.sh: ${TCL_SRC_DIR}]) ]) #------------------------------------------------------------------------ # TEA_PUBLIC_TCL_HEADERS -- # # Locate the installed public Tcl header files # # Arguments: # None. # # Requires: # CYGPATH must be set # # Results: # # Adds a --with-tclinclude switch to configure. # Result is cached. # # Substs the following vars: # TCL_INCLUDES #------------------------------------------------------------------------ AC_DEFUN(TEA_PUBLIC_TCL_HEADERS, [ AC_MSG_CHECKING([for Tcl public headers]) AC_ARG_WITH(tclinclude, [ --with-tclinclude directory containing the public Tcl header files], with_tclinclude=${withval}) AC_CACHE_VAL(ac_cv_c_tclh, [ # Use the value from --with-tclinclude, if it was given if test x"${with_tclinclude}" != x ; then if test -f "${with_tclinclude}/tcl.h" ; then ac_cv_c_tclh=${with_tclinclude} else AC_MSG_ERROR([${with_tclinclude} directory does not contain tcl.h]) fi else # Check order: pkg --prefix location, Tcl's --prefix location, # directory of tclConfig.sh, and Tcl source directory. # Looking in the source dir is not ideal, but OK. eval "temp_includedir=${includedir}" list="`ls -d ${temp_includedir} 2>/dev/null` \ `ls -d ${TCL_PREFIX}/include 2>/dev/null` \ `ls -d ${TCL_BIN_DIR}/../include 2>/dev/null` \ `ls -d ${TCL_SRC_DIR}/generic 2>/dev/null`" if test "${TEA_PLATFORM}" != "windows" -o "$GCC" = "yes"; then list="$list /usr/local/include /usr/include" fi for i in $list ; do if test -f "$i/tcl.h" ; then ac_cv_c_tclh=$i break fi done fi ]) # Print a message based on how we determined the include path if test x"${ac_cv_c_tclh}" = x ; then AC_MSG_ERROR([tcl.h not found. Please specify its location with --with-tclinclude]) else AC_MSG_RESULT([${ac_cv_c_tclh}]) fi # Convert to a native path and substitute into the output files. INCLUDE_DIR_NATIVE=`${CYGPATH} ${ac_cv_c_tclh}` TCL_INCLUDES=-I\"${INCLUDE_DIR_NATIVE}\" AC_SUBST(TCL_INCLUDES) ]) #------------------------------------------------------------------------ # TEA_PRIVATE_TK_HEADERS -- # # Locate the private Tk include files # # Arguments: # # Requires: # TK_SRC_DIR Assumes that TEA_LOAD_TKCONFIG has # already been called. # # Results: # # Substs the following vars: # TK_INCLUDES #------------------------------------------------------------------------ AC_DEFUN(TEA_PRIVATE_TK_HEADERS, [ AC_MSG_CHECKING([for Tk private include files]) if test "${TEA_PLATFORM}" = "windows"; then TK_TOP_DIR_NATIVE=\"`${CYGPATH} ${TK_SRC_DIR}`\" TK_UNIX_DIR_NATIVE=\"`${CYGPATH} ${TK_SRC_DIR}/unix`\" TK_WIN_DIR_NATIVE=\"`${CYGPATH} ${TK_SRC_DIR}/win`\" TK_GENERIC_DIR_NATIVE=\"`${CYGPATH} ${TK_SRC_DIR}/generic`\" TK_XLIB_DIR_NATIVE=\"`${CYGPATH} ${TK_SRC_DIR}/xlib`\" TK_PLATFORM_DIR_NATIVE=${TK_WIN_DIR_NATIVE} TK_INCLUDES="-I${TK_GENERIC_DIR_NATIVE} -I${TK_PLATFORM_DIR_NATIVE} -I${TK_XLIB_DIR_NATIVE}" else TK_TOP_DIR_NATIVE='${TK_SRC_DIR}' TK_GENERIC_DIR_NATIVE='${TK_TOP_DIR_NATIVE}/generic' TK_UNIX_DIR_NATIVE='${TK_TOP_DIR_NATIVE}/unix' TK_WIN_DIR_NATIVE='${TK_TOP_DIR_NATIVE}/win' TK_PLATFORM_DIR_NATIVE=${TK_UNIX_DIR_NATIVE} # substitute these in "relaxed" so that TK_INCLUDES still works # without requiring the other vars to be defined in the Makefile eval "TK_INCLUDES=\"-I${TK_GENERIC_DIR_NATIVE} -I${TK_PLATFORM_DIR_NATIVE}\"" fi AC_SUBST(TK_TOP_DIR_NATIVE) AC_SUBST(TK_UNIX_DIR_NATIVE) AC_SUBST(TK_WIN_DIR_NATIVE) AC_SUBST(TK_GENERIC_DIR_NATIVE) AC_SUBST(TK_XLIB_DIR_NATIVE) AC_SUBST(TK_PLATFORM_DIR_NATIVE) AC_SUBST(TK_INCLUDES) AC_MSG_RESULT([Using srcdir found in tkConfig.sh: ${TK_SRC_DIR}]) ]) #------------------------------------------------------------------------ # TEA_PUBLIC_TK_HEADERS -- # # Locate the installed public Tk header files # # Arguments: # None. # # Requires: # CYGPATH must be set # # Results: # # Adds a --with-tkinclude switch to configure. # Result is cached. # # Substs the following vars: # TK_INCLUDES #------------------------------------------------------------------------ AC_DEFUN(TEA_PUBLIC_TK_HEADERS, [ AC_MSG_CHECKING([for Tk public headers]) AC_ARG_WITH(tkinclude, [ --with-tkinclude directory containing the public Tk header files.], with_tkinclude=${withval}) AC_CACHE_VAL(ac_cv_c_tkh, [ # Use the value from --with-tkinclude, if it was given if test x"${with_tkinclude}" != x ; then if test -f "${with_tkinclude}/tk.h" ; then ac_cv_c_tkh=${with_tkinclude} else AC_MSG_ERROR([${with_tkinclude} directory does not contain tk.h]) fi else # Check order: pkg --prefix location, Tcl's --prefix location, # directory of tclConfig.sh, and Tcl source directory. # Looking in the source dir is not ideal, but OK. eval "temp_includedir=${includedir}" list="`ls -d ${temp_includedir} 2>/dev/null` \ `ls -d ${TK_PREFIX}/include 2>/dev/null` \ `ls -d ${TCL_PREFIX}/include 2>/dev/null` \ `ls -d ${TCL_BIN_DIR}/../include 2>/dev/null` \ `ls -d ${TK_SRC_DIR}/generic 2>/dev/null`" if test "${TEA_PLATFORM}" != "windows" -o "$GCC" = "yes"; then list="$list /usr/local/include /usr/include" fi for i in $list ; do if test -f "$i/tk.h" ; then ac_cv_c_tkh=$i break fi done fi ]) # Print a message based on how we determined the include path if test x"${ac_cv_c_tkh}" = x ; then AC_MSG_ERROR([tk.h not found. Please specify its location with --with-tkinclude]) else AC_MSG_RESULT([${ac_cv_c_tkh}]) fi # Convert to a native path and substitute into the output files. INCLUDE_DIR_NATIVE=`${CYGPATH} ${ac_cv_c_tkh}` TK_INCLUDES=-I\"${INCLUDE_DIR_NATIVE}\" AC_SUBST(TK_INCLUDES) if test "${TEA_PLATFORM}" = "windows" ; then # On Windows, we need the X compat headers AC_MSG_CHECKING([for X11 header files]) if test ! -r "${INCLUDE_DIR_NATIVE}/X11/Xlib.h"; then INCLUDE_DIR_NATIVE="`${CYGPATH} ${TK_SRC_DIR}/xlib`" TK_XINCLUDES=-I\"${INCLUDE_DIR_NATIVE}\" AC_SUBST(TK_XINCLUDES) fi AC_MSG_RESULT([${INCLUDE_DIR_NATIVE}]) fi ]) #------------------------------------------------------------------------ # TEA_PROG_TCLSH # Locate a tclsh shell in the following directories: # ${TCL_BIN_DIR} ${TCL_BIN_DIR}/../bin # ${exec_prefix}/bin ${prefix}/bin # ${PATH} # # Arguments # none # # Results # Subst's the following values: # TCLSH_PROG #------------------------------------------------------------------------ AC_DEFUN(TEA_PROG_TCLSH, [ # Allow the user to provide this setting in the env if test "x${TCLSH_PROG}" = "x" ; then AC_MSG_CHECKING([for tclsh]) AC_CACHE_VAL(ac_cv_path_tclsh, [ if test "${TEA_PLATFORM}" = "windows" -a "$do64bit_ok" = "yes" \ -o "$doWince" != "no" ; then # A Windows cross-compile build - restrict target tclsh # as we need one we can run on this system search_path=`echo ${PATH} | sed -e 's/:/ /g'` else search_path=`echo ${TCL_BIN_DIR}:${TCL_BIN_DIR}/../bin:${exec_prefix}/bin:${prefix}/bin:${PATH} | sed -e 's/:/ /g'` fi for dir in $search_path ; do for j in `ls -r $dir/tclsh[[8-9]]*${EXEEXT} 2> /dev/null` \ `ls -r $dir/tclsh*${EXEEXT} 2> /dev/null` ; do if test x"$ac_cv_path_tclsh" = x ; then if test -f "$j" ; then ac_cv_path_tclsh=$j break fi fi done done ]) if test -f "$ac_cv_path_tclsh" ; then TCLSH_PROG=$ac_cv_path_tclsh AC_MSG_RESULT([$TCLSH_PROG]) else AC_MSG_ERROR([No tclsh found in PATH: $search_path]) fi fi AC_SUBST(TCLSH_PROG) ]) #------------------------------------------------------------------------ # TEA_PROG_WISH # Locate a wish shell in the following directories: # ${TK_BIN_DIR} ${TK_BIN_DIR}/../bin # ${TCL_BIN_DIR} ${TCL_BIN_DIR}/../bin # ${exec_prefix}/bin ${prefix}/bin # ${PATH} # # Arguments # none # # Results # Subst's the following values: # WISH_PROG #------------------------------------------------------------------------ AC_DEFUN(TEA_PROG_WISH, [ # Allow the user to provide this setting in the env if test "x${WISH_PROG}" = "x" ; then AC_MSG_CHECKING([for wish]) AC_CACHE_VAL(ac_cv_path_wish, [ if test "${TEA_PLATFORM}" = "windows" -a "$do64bit_ok" = "yes" \ -o "$doWince" != "no" ; then # A Windows cross-compile build - restrict target tclsh # as we need one we can run on this system search_path=`echo ${PATH} | sed -e 's/:/ /g'` else search_path=`echo ${TK_BIN_DIR}:${TK_BIN_DIR}/../bin:${TCL_BIN_DIR}:${TCL_BIN_DIR}/../bin:${exec_prefix}/bin:${prefix}/bin:${PATH} | sed -e 's/:/ /g'` fi for dir in $search_path ; do for j in `ls -r $dir/wish[[8-9]]*${EXEEXT} 2> /dev/null` \ `ls -r $dir/wish*${EXEEXT} 2> /dev/null` ; do if test x"$ac_cv_path_wish" = x ; then if test -f "$j" ; then ac_cv_path_wish=$j break fi fi done done ]) if test -f "$ac_cv_path_wish" ; then WISH_PROG=$ac_cv_path_wish AC_MSG_RESULT([$WISH_PROG]) else AC_MSG_ERROR([No wish found in PATH: $search_path]) fi fi AC_SUBST(WISH_PROG) ]) #------------------------------------------------------------------------ # TEA_PATH_CONFIG -- # # Locate the ${1}Config.sh file and perform a sanity check on # the ${1} compile flags. These are used by packages like # [incr Tk] that load *Config.sh files from more than Tcl and Tk. # # Arguments: # none # # Results: # # Adds the following arguments to configure: # --with-$1=... # # Defines the following vars: # $1_BIN_DIR Full path to the directory containing # the $1Config.sh file #------------------------------------------------------------------------ AC_DEFUN(TEA_PATH_CONFIG, [ # # Ok, lets find the $1 configuration # First, look for one uninstalled. # the alternative search directory is invoked by --with-$1 # if test x"${no_$1}" = x ; then # we reset no_$1 in case something fails here no_$1=true AC_ARG_WITH($1, [ --with-$1 directory containing $1 configuration ($1Config.sh)], with_$1config=${withval}) AC_MSG_CHECKING([for $1 configuration]) AC_CACHE_VAL(ac_cv_c_$1config,[ # First check to see if --with-$1 was specified. if test x"${with_$1config}" != x ; then if test -f "${with_$1config}/$1Config.sh" ; then ac_cv_c_$1config=`(cd ${with_$1config}; pwd)` else AC_MSG_ERROR([${with_$1config} directory doesn't contain $1Config.sh]) fi fi # then check for a private $1 installation if test x"${ac_cv_c_$1config}" = x ; then for i in \ ../$1 \ `ls -dr ../$1[[8-9]].[[0-9]]* 2>/dev/null` \ ../../$1 \ `ls -dr ../../$1[[8-9]].[[0-9]]* 2>/dev/null` \ ../../../$1 \ `ls -dr ../../../$1[[8-9]].[[0-9]]* 2>/dev/null` \ ${srcdir}/../$1 \ `ls -dr ${srcdir}/../$1[[8-9]].[[0-9]]* 2>/dev/null` \ ; do if test -f "$i/$1Config.sh" ; then ac_cv_c_$1config=`(cd $i; pwd)` break fi if test -f "$i/unix/$1Config.sh" ; then ac_cv_c_$1config=`(cd $i/unix; pwd)` break fi done fi # check in a few common install locations if test x"${ac_cv_c_$1config}" = x ; then for i in `ls -d ${exec_prefix}/lib 2>/dev/null` \ `ls -d ${prefix}/lib 2>/dev/null` \ `ls -d /usr/local/lib 2>/dev/null` \ `ls -d /usr/contrib/lib 2>/dev/null` \ `ls -d /usr/lib 2>/dev/null` \ ; do if test -f "$i/$1Config.sh" ; then ac_cv_c_$1config=`(cd $i; pwd)` break fi done fi ]) if test x"${ac_cv_c_$1config}" = x ; then $1_BIN_DIR="# no $1 configs found" AC_MSG_WARN("Cannot find $1 configuration definitions") exit 0 else no_$1= $1_BIN_DIR=${ac_cv_c_$1config} AC_MSG_RESULT([found $$1_BIN_DIR/$1Config.sh]) fi fi ]) #------------------------------------------------------------------------ # TEA_LOAD_CONFIG -- # # Load the $1Config.sh file # # Arguments: # # Requires the following vars to be set: # $1_BIN_DIR # # Results: # # Subst the following vars: # $1_SRC_DIR # $1_LIB_FILE # $1_LIB_SPEC # #------------------------------------------------------------------------ AC_DEFUN(TEA_LOAD_CONFIG, [ AC_MSG_CHECKING([for existence of ${$1_BIN_DIR}/$1Config.sh]) if test -f "${$1_BIN_DIR}/$1Config.sh" ; then AC_MSG_RESULT([loading]) . ${$1_BIN_DIR}/$1Config.sh else AC_MSG_RESULT([file not found]) fi # # If the $1_BIN_DIR is the build directory (not the install directory), # then set the common variable name to the value of the build variables. # For example, the variable $1_LIB_SPEC will be set to the value # of $1_BUILD_LIB_SPEC. An extension should make use of $1_LIB_SPEC # instead of $1_BUILD_LIB_SPEC since it will work with both an # installed and uninstalled version of Tcl. # if test -f ${$1_BIN_DIR}/Makefile ; then AC_MSG_WARN([Found Makefile - using build library specs for $1]) $1_LIB_SPEC=${$1_BUILD_LIB_SPEC} $1_STUB_LIB_SPEC=${$1_BUILD_STUB_LIB_SPEC} $1_STUB_LIB_PATH=${$1_BUILD_STUB_LIB_PATH} fi AC_SUBST($1_VERSION) AC_SUBST($1_SRC_DIR) AC_SUBST($1_LIB_FILE) AC_SUBST($1_LIB_SPEC) AC_SUBST($1_STUB_LIB_FILE) AC_SUBST($1_STUB_LIB_SPEC) AC_SUBST($1_STUB_LIB_PATH) ]) #------------------------------------------------------------------------ # TEA_PATH_CELIB -- # # Locate Keuchel's celib emulation layer for targeting Win/CE # # Arguments: # none # # Results: # # Adds the following arguments to configure: # --with-celib=... # # Defines the following vars: # CELIB_DIR Full path to the directory containing # the include and platform lib files #------------------------------------------------------------------------ AC_DEFUN(TEA_PATH_CELIB, [ # First, look for one uninstalled. # the alternative search directory is invoked by --with-celib if test x"${no_celib}" = x ; then # we reset no_celib in case something fails here no_celib=true AC_ARG_WITH(celib,[ --with-celib=DIR use Windows/CE support library from DIR], with_celibconfig=${withval}) AC_MSG_CHECKING([for Windows/CE celib directory]) AC_CACHE_VAL(ac_cv_c_celibconfig,[ # First check to see if --with-celibconfig was specified. if test x"${with_celibconfig}" != x ; then if test -d "${with_celibconfig}/inc" ; then ac_cv_c_celibconfig=`(cd ${with_celibconfig}; pwd)` else AC_MSG_ERROR([${with_celibconfig} directory doesn't contain inc directory]) fi fi # then check for a celib library if test x"${ac_cv_c_celibconfig}" = x ; then for i in \ ../celib-palm-3.0 \ ../celib \ ../../celib-palm-3.0 \ ../../celib \ `ls -dr ../celib-*3.[[0-9]]* 2>/dev/null` \ ${srcdir}/../celib-palm-3.0 \ ${srcdir}/../celib \ `ls -dr ${srcdir}/../celib-*3.[[0-9]]* 2>/dev/null` \ ; do if test -d "$i/inc" ; then ac_cv_c_celibconfig=`(cd $i; pwd)` break fi done fi ]) if test x"${ac_cv_c_celibconfig}" = x ; then AC_MSG_ERROR([Cannot find celib support library directory]) else no_celib= CELIB_DIR=${ac_cv_c_celibconfig} AC_MSG_RESULT([found $CELIB_DIR]) TEA_PATH_NOSPACE(CELIB_DIR, ${ac_cv_c_celibconfig}) fi fi ]) #------------------------------------------------------------------------ # TEA_PATH_NOSPACE # Ensure that the given path has no spaces. This is necessary for # CC (and consitutuent vars that build it up) to work in the # tortured autoconf environment. Currently only for Windows use. # # Arguments # VAR - name of the variable to set # PATH - path to ensure no spaces in # # Results # Sets $VAR to short path of $PATH if it can be found. #------------------------------------------------------------------------ AC_DEFUN([TEA_PATH_NOSPACE], [ if test "${TEA_PLATFORM}" = "windows" ; then # we need TCLSH_PROG defined to get Windows short pathnames AC_REQUIRE([TEA_PROG_TCLSH]) AC_MSG_CHECKING([short pathname for $1 ($2)]) shortpath= case "$2" in *\ *) # Only do this if we need to. shortpath=`echo "puts [[file attributes {$2} -shortname]] ; exit" | ${TCLSH_PROG} 2>/dev/null` ;; esac if test "x${shortpath}" = "x" ; then AC_MSG_RESULT([not changed]) else $1=$shortpath AC_MSG_RESULT([${$1}]) fi fi ])