# makefile.vc -- -*- Makefile -*- # # Microsoft Visual C++ makefile for use with nmake.exe v1.62+ (VC++ 5.0+) # # This makefile is based upon the Tcl 8.4 Makefile.vc and modified to # make it suitable as a general package makefile. Look for the word EDIT # which marks sections that may need modification. As a minumum you will # need to change the PROJECT, DOTVERSION and DLLOBJS variables to values # relevant to your package. # # See the file "license.terms" for information on usage and redistribution # of this file, and for a DISCLAIMER OF ALL WARRANTIES. # # Copyright (c) 1995-1996 Sun Microsystems, Inc. # Copyright (c) 1998-2000 Ajuba Solutions. # Copyright (c) 2001 ActiveState Corporation. # Copyright (c) 2001-2002 David Gravereaux. # Copyright (c) 2003-2006 Pat Thoyts # #------------------------------------------------------------------------- # RCS: @(#)$Id: makefile.vc,v 1.6 2008/03/19 22:38:26 hobbs2 Exp $ #------------------------------------------------------------------------- # Check to see we are configured to build with MSVC (MSDEVDIR or MSVCDIR) # or with the MS Platform SDK (MSSDK). Visual Studio .NET 2003 and 2005 define # VCINSTALLDIR instead. The MSVC Toolkit release defines yet another. !if !defined(MSDEVDIR) && !defined(MSVCDIR) && !defined(MSSDK) && !defined(VCINSTALLDIR) && !defined(VCToolkitInstallDir) MSG = ^ You need to run vcvars32.bat from Developer Studio or setenv.bat from the^ Platform SDK first to setup the environment. Jump to this line to read^ the build instructions. !error $(MSG) !endif #------------------------------------------------------------------------------ # HOW TO USE this makefile: # # 1) It is now necessary to have %MSVCDir% set in the environment. This is # used as a check to see if vcvars32.bat had been run prior to running # nmake or during the installation of Microsoft Visual C++, MSVCDir had # been set globally and the PATH adjusted. Either way is valid. # # You'll need to run vcvars32.bat contained in the MsDev's vc(98)/bin # directory to setup the proper environment, if needed, for your current # setup. This is a needed bootstrap requirement and allows the swapping of # different environments to be easier. # # 2) To use the Platform SDK (not expressly needed), run setenv.bat after # vcvars32.bat according to the instructions for it. This can also turn on # the 64-bit compiler, if your SDK has it. # # 3) Targets are: # all -- Builds everything. # -- Builds the project (eg: nmake sample) # test -- Builds and runs the test suite. # install -- Installs the built binaries and libraries to $(INSTALLDIR) # in an appropriate subdirectory. # clean/realclean/distclean -- varying levels of cleaning. # # 4) Macros usable on the commandline: # INSTALLDIR= # Sets where to install Tcl from the built binaries. # C:\Progra~1\Tcl is assumed when not specified. # # OPTS=static,msvcrt,staticpkg,threads,symbols,profile,loimpact,none # Sets special options for the core. The default is for none. # Any combination of the above may be used (comma separated). # 'none' will over-ride everything to nothing. # # static = Builds a static library of the core instead of a # dll. The shell will be static (and large), as well. # msvcrt = Effects the static option only to switch it from # using libcmt(d) as the C runtime [by default] to # msvcrt(d). This is useful for static embedding # support. # staticpkg = Effects the static option only to switch # tclshXX.exe to have the dde and reg extension linked # inside it. # nothreads = Turns off multithreading support (not recommended) # thrdalloc = Use the thread allocator (shared global free pool). # symbols = Adds symbols for step debugging. # profile = Adds profiling hooks. Map file is assumed. # loimpact = Adds a flag for how NT treats the heap to keep memory # in use, low. This is said to impact alloc performance. # # STATS=memdbg,compdbg,none # Sets optional memory and bytecode compiler debugging code added # to the core. The default is for none. Any combination of the # above may be used (comma separated). 'none' will over-ride # everything to nothing. # # memdbg = Enables the debugging memory allocator. # compdbg = Enables byte compilation logging. # # MACHINE=(IX86|IA64|ALPHA|AMD64) # Set the machine type used for the compiler, linker, and # resource compiler. This hook is needed to tell the tools # when alternate platforms are requested. IX86 is the default # when not specified. If the CPU environment variable has been # set (ie: recent Platform SDK) then MACHINE is set from CPU. # # TMP_DIR= # OUT_DIR= # Hooks to allow the intermediate and output directories to be # changed. $(OUT_DIR) is assumed to be # $(BINROOT)\(Release|Debug) based on if symbols are requested. # $(TMP_DIR) will de $(OUT_DIR)\ by default. # # TESTPAT= # Reads the tests requested to be run from this file. # # CFG_ENCODING=encoding # name of encoding for configuration information. Defaults # to cp1252 # # 5) Examples: # # Basic syntax of calling nmake looks like this: # nmake [-nologo] -f makefile.vc [target|macrodef [target|macrodef] [...]] # # Standard (no frills) # c:\tcl_src\win\>c:\progra~1\micros~1\vc98\bin\vcvars32.bat # Setting environment for using Microsoft Visual C++ tools. # c:\tcl_src\win\>nmake -f makefile.vc all # c:\tcl_src\win\>nmake -f makefile.vc install INSTALLDIR=c:\progra~1\tcl # # Building for Win64 # c:\tcl_src\win\>c:\progra~1\micros~1\vc98\bin\vcvars32.bat # Setting environment for using Microsoft Visual C++ tools. # c:\tcl_src\win\>c:\progra~1\platfo~1\setenv.bat /pre64 /RETAIL # Targeting Windows pre64 RETAIL # c:\tcl_src\win\>nmake -f makefile.vc MACHINE=IA64 # #------------------------------------------------------------------------------ #============================================================================== ############################################################################### #------------------------------------------------------------------------------ !if !exist("makefile.vc") MSG = ^ You must run this makefile only from the directory it is in.^ Please `cd` to its location first. !error $(MSG) !endif #------------------------------------------------------------------------- # Project specific information (EDIT) # # You should edit this with the name and version of your project. This # information is used to generate the name of the package library and # it's install location. # # For example, the sample extension is going to build sample04.dll and # would install it into $(INSTALLDIR)\lib\sample04 # # You need to specify the object files that need to be linked into your # binary here. # #------------------------------------------------------------------------- PROJECT = tls # Uncomment the following line if this is a Tk extension. #PROJECT_REQUIRES_TK=1 !include "rules.vc" DOTVERSION = 1.6 VERSION = $(DOTVERSION:.=) STUBPREFIX = $(PROJECT)stub DLLOBJS = \ $(TMP_DIR)\tls.obj \ $(TMP_DIR)\tlsBIO.obj \ $(TMP_DIR)\tlsIO.obj \ $(TMP_DIR)\tlsX509.obj \ !if !$(STATIC_BUILD) $(TMP_DIR)\tls.res !endif #------------------------------------------------------------------------- # Locate the OpenSSL library and headers #------------------------------------------------------------------------- !ifndef OPENSSL OPENSSL = c:\opt\openssl !endif !ifndef SSL_INCLUDE_DIR SSL_INCLUDE_DIR = $(OPENSSL)\include !endif !ifndef SSL_LIB_DIR SSL_LIB_DIR = $(OPENSSL)\lib !endif SSL_LIBS =-libpath:"$(SSL_LIB_DIR)" ssleay32s.lib libeay32s.lib SSL_CFLAGS =-DNO_IDEA=1 -DNO_RC5=1 !if !exist("$(SSL_LIB_DIR)\ssleay32s.lib") MSG = ^ Failed to locate "$(SSL_LIB_DIR)\ssleay32s.lib" You must provide the path to your OpenSSL library.... !error $(MSG) !endif #------------------------------------------------------------------------- # Target names and paths ( shouldn't need changing ) #------------------------------------------------------------------------- BINROOT = . ROOT = .. PRJIMPLIB = $(OUT_DIR)\$(PROJECT)$(VERSION)$(SUFX).lib PRJLIBNAME = $(PROJECT)$(VERSION)$(SUFX).$(EXT) PRJLIB = $(OUT_DIR)\$(PRJLIBNAME) PRJSTUBLIBNAME = $(STUBPREFIX)$(VERSION).lib PRJSTUBLIB = $(OUT_DIR)\$(PRJSTUBLIBNAME) ### Make sure we use backslash only. PRJ_INSTALL_DIR = $(_INSTALLDIR)\$(PROJECT)$(DOTVERSION) LIB_INSTALL_DIR = $(PRJ_INSTALL_DIR) BIN_INSTALL_DIR = $(PRJ_INSTALL_DIR) DOC_INSTALL_DIR = $(PRJ_INSTALL_DIR) SCRIPT_INSTALL_DIR = $(PRJ_INSTALL_DIR) INCLUDE_INSTALL_DIR = $(_TCLDIR)\include ### The following paths CANNOT have spaces in them. GENERICDIR = $(ROOT) WINDIR = $(ROOT)\win LIBDIR = $(ROOT) DOCDIR = $(ROOT) TOOLSDIR = $(ROOT)\tools COMPATDIR = $(ROOT)\compat #--------------------------------------------------------------------- # Compile flags #--------------------------------------------------------------------- !if !$(DEBUG) !if $(OPTIMIZING) ### This cranks the optimization level to maximize speed cdebug = $(OPTIMIZATIONS) !else cdebug = !endif !else if "$(MACHINE)" == "IA64" #|| "$(MACHINE)" == "AMD64" ### Warnings are too many, can't support warnings into errors. cdebug = -Zi -Od $(DEBUGFLAGS) !else cdebug = -Zi -WX $(DEBUGFLAGS) !endif ### Declarations common to all compiler options cwarn = $(WARNINGS) -D _CRT_SECURE_NO_DEPRECATE -D _CRT_NONSTDC_NO_DEPRECATE cflags = -nologo -c $(COMPILERFLAGS) $(cwarn) -Fp$(TMP_DIR)^\ !if $(MSVCRT) !if $(DEBUG) && !$(UNCHECKED) crt = -MDd !else crt = -MD !endif !else !if $(DEBUG) && !$(UNCHECKED) crt = -MTd !else crt = -MT !endif !endif !if !$(STATIC_BUILD) cflags = $(cflags) -DUSE_TCL_STUBS !if defined(TKSTUBLIB) cflags = $(cflags) -DUSE_TK_STUBS !endif !endif INCLUDES = $(TCL_INCLUDES) -I"$(WINDIR)" -I"$(GENERICDIR)" \ -I"$(SSL_INCLUDE_DIR)" BASE_CFLAGS = $(cflags) $(cdebug) $(crt) $(INCLUDES) CON_CFLAGS = $(cflags) $(cdebug) $(crt) -DCONSOLE TCL_CFLAGS = -DPACKAGE_NAME="\"$(PROJECT)\"" \ -DPACKAGE_VERSION="\"$(DOTVERSION)\"" \ $(SSL_CFLAGS) \ $(BASE_CFLAGS) $(OPTDEFINES) #--------------------------------------------------------------------- # Link flags #--------------------------------------------------------------------- !if $(DEBUG) ldebug = -debug:full -debugtype:cv !if $(MSVCRT) ldebug = $(ldebug) -nodefaultlib:msvcrt !endif !else ldebug = -release -opt:ref -opt:icf,3 !endif ### Declarations common to all linker options lflags = -nologo -machine:$(MACHINE) $(LINKERFLAGS) $(ldebug) !if $(PROFILE) lflags = $(lflags) -profile !endif !if $(ALIGN98_HACK) && !$(STATIC_BUILD) ### Align sections for PE size savings. lflags = $(lflags) -opt:nowin98 !else if !$(ALIGN98_HACK) && $(STATIC_BUILD) ### Align sections for speed in loading by choosing the virtual page size. lflags = $(lflags) -align:4096 !endif !if $(LOIMPACT) lflags = $(lflags) -ws:aggressive !endif dlllflags = $(lflags) -dll conlflags = $(lflags) -subsystem:console guilflags = $(lflags) -subsystem:windows !if !$(STATIC_BUILD) baselibs = $(TCLSTUBLIB) !if defined(TKSTUBLIB) baselibs = $(baselibs) $(TKSTUBLIB) !endif !endif # Avoid 'unresolved external symbol __security_cookie' errors. # c.f. http://support.microsoft.com/?id=894573 !if "$(MACHINE)" == "IA64" || "$(MACHINE)" == "AMD64" !if $(VCVERSION) >= 1400 && $(VCVERSION) < 1500 baselibs = $(baselibs) bufferoverflowU.lib !endif !endif baselibs = $(baselibs) $(SSL_LIBS) ws2_32.lib user32.lib gdi32.lib advapi32.lib #--------------------------------------------------------------------- # TclTest flags #--------------------------------------------------------------------- !IF "$(TESTPAT)" != "" TESTFLAGS = $(TESTFLAGS) -file $(TESTPAT) !ENDIF #--------------------------------------------------------------------- # Project specific targets (EDIT) #--------------------------------------------------------------------- all: setup $(PROJECT) $(PROJECT): setup $(OUT_DIR)\pkgIndex.tcl $(OUT_DIR)\tls.tcl $(PRJLIB) install: install-binaries install-libraries install-docs test: setup $(PROJECT) @set TCL_LIBRARY=$(TCL_LIBRARY:\=/) @set TCLLIBPATH=$(OUT_DIR:\=/) !if $(TCLINSTALL) @set PATH=$(_TCLDIR)\bin;$(PATH) !else @set PATH=$(_TCLDIR)\win\$(BUILDDIRTOP);$(PATH) !endif !if "$(OS)" == "Windows_NT" || "$(MSVCDIR)" == "IDE" $(DEBUGGER) $(TCLSH) "$(ROOT)/tests/all.tcl" $(TESTFLAGS) !else @echo Please wait while the tests are collected... $(TCLSH) "$(ROOT)/tests/all.tcl" $(TESTFLAGS) > tests.log type tests.log | more !endif shell: setup $(PROJECT) @set TCL_LIBRARY=$(TCL_LIBRARY:\=/) @set TCLLIBPATH=$(OUT_DIR:\=/) !if $(TCLINSTALL) @set PATH=$(_TCLDIR)\bin;$(PATH) !else @set PATH=$(_TCLDIR)\win\$(BUILDDIRTOP);$(PATH) !endif $(DEBUGGER) $(TCLSH) setup: @if not exist $(OUT_DIR)\nul mkdir $(OUT_DIR) @if not exist $(TMP_DIR)\nul mkdir $(TMP_DIR) # See /win/coffbase.txt for extension base addresses. $(PRJLIB): $(DLLOBJS) !if $(STATIC_BUILD) $(lib32) -nologo -out:$@ @<< $** << !else $(link32) $(dlllflags) -base:0x10780000 -out:$@ $(baselibs) @<< $** << $(_VC_MANIFEST_EMBED_DLL) -@del $*.exp !endif $(PRJSTUBLIB): $(PRJSTUBOBJS) $(lib32) -nologo -out:$@ $(PRJSTUBOBJS) #--------------------------------------------------------------------- # Implicit rules #--------------------------------------------------------------------- {$(WINDIR)}.c{$(TMP_DIR)}.obj:: $(cc32) $(TCL_CFLAGS) -DBUILD_$(PROJECT) -Fo$(TMP_DIR)\ @<< $< << {$(GENERICDIR)}.c{$(TMP_DIR)}.obj:: $(cc32) $(TCL_CFLAGS) -DBUILD_$(PROJECT) -Fo$(TMP_DIR)\ @<< $< << {$(COMPATDIR)}.c{$(TMP_DIR)}.obj:: $(cc32) $(TCL_CFLAGS) -DBUILD_$(PROJECT) -Fo$(TMP_DIR)\ @<< $< << {$(WINDIR)}.rc{$(TMP_DIR)}.res: $(rc32) -fo $@ -r -i "$(GENERICDIR)" -D__WIN32__ \ -DCOMMAVERSION=$(DOTVERSION:.=,),0 \ -DDOTVERSION=\"$(DOTVERSION)\" \ -DVERSION=\"$(VERSION)$(SUFX)\" \ !if $(DEBUG) -d DEBUG \ !endif !if $(TCL_THREADS) -d TCL_THREADS \ !endif !if $(STATIC_BUILD) -d STATIC_BUILD \ !endif $< .SUFFIXES: .SUFFIXES:.c .rc #------------------------------------------------------------------------- # Explicit dependency rules # #------------------------------------------------------------------------- .PHONY: $(OUT_DIR)\pkgIndex.tcl $(OUT_DIR)\tls.tcl $(OUT_DIR)\tls.tcl: $(GENERICDIR)\tls.tcl @$(COPY) $** $@ $(OUT_DIR)\pkgIndex.tcl: @type << > $@ if {![package vsatisfies [package provide Tcl] 8.3]} {return} package ifneeded $(PROJECT) $(DOTVERSION) "source \[file join [list $$dir] tls.tcl\] ; tls::initlib [list $$dir] $(PRJLIBNAME)" << #--------------------------------------------------------------------- # Installation. (EDIT) # # You may need to modify this section to reflect the final distribution # of your files and possibly to generate documentation. # #--------------------------------------------------------------------- install-binaries: @echo Installing binaries to '$(SCRIPT_INSTALL_DIR)' @if not exist "$(SCRIPT_INSTALL_DIR)" mkdir "$(SCRIPT_INSTALL_DIR)" @$(CPY) $(PRJLIB) "$(SCRIPT_INSTALL_DIR)" >NUL install-libraries: @echo Installing libraries to '$(SCRIPT_INSTALL_DIR)' @if exist $(LIBDIR) $(CPY) $(LIBDIR)\tls.tcl "$(SCRIPT_INSTALL_DIR)" > NUL @echo Installing package index in '$(SCRIPT_INSTALL_DIR)' @$(CPY) $(OUT_DIR)\pkgIndex.tcl "$(SCRIPT_INSTALL_DIR)" install-docs: @echo Installing documentation files to '$(DOC_INSTALL_DIR)' @if exist $(DOCDIR) $(CPY) $(DOCDIR)\tls.htm "$(DOC_INSTALL_DIR)" >NUL #--------------------------------------------------------------------- # Clean up #--------------------------------------------------------------------- clean: @if exist $(TMP_DIR)\nul $(RMDIR) $(TMP_DIR) @if exist $(WINDIR)\version.vc del $(WINDIR)\version.vc @if exist $(WINDIR)\vercl.i del $(WINDIR)\vercl.i @if exist $(WINDIR)\vercl.x del $(WINDIR)\vercl.x @if exist $(WINDIR)\_junk.pch del $(WINDIR)\_junk.pch realclean: clean @if exist $(OUT_DIR)\nul $(RMDIR) $(OUT_DIR) distclean: realclean @if exist $(WINDIR)\nmakehlp.exe del $(WINDIR)\nmakehlp.exe @if exist $(WINDIR)\nmakehlp.obj del $(WINDIR)\nmakehlp.obj