# tcl.m4 --
#
# This file provides a set of autoconf macros to help TEA-enable
# a Tcl extension.
#
# Copyright (c) 1999-2000 Ajuba Solutions.
# Copyright (c) 2002-2005 ActiveState Corporation.
#
# See the file "license.terms" for information on usage and redistribution
# of this file, and for a DISCLAIMER OF ALL WARRANTIES.
#
# RCS: @(#) $Id: tcl.m4,v 1.6 2007/06/22 21:19:12 hobbs2 Exp $
AC_PREREQ(2.57)
dnl TEA extensions pass us the version of TEA they think they
dnl are compatible with (must be set in TEA_INIT below)
dnl TEA_VERSION="3.6"
# Possible values for key variables defined:
#
# TEA_WINDOWINGSYSTEM - win32 aqua x11 (mirrors 'tk windowingsystem')
# TEA_PLATFORM - windows unix
#
#------------------------------------------------------------------------
# TEA_PATH_TCLCONFIG --
#
# Locate the tclConfig.sh file and perform a sanity check on
# the Tcl compile flags
#
# Arguments:
# none
#
# Results:
#
# Adds the following arguments to configure:
# --with-tcl=...
#
# Defines the following vars:
# TCL_BIN_DIR Full path to the directory containing
# the tclConfig.sh file
#------------------------------------------------------------------------
AC_DEFUN([TEA_PATH_TCLCONFIG], [
dnl Make sure we are initialized
AC_REQUIRE([TEA_INIT])
#
# Ok, lets find the tcl configuration
# First, look for one uninstalled.
# the alternative search directory is invoked by --with-tcl
#
if test x"${no_tcl}" = x ; then
# we reset no_tcl in case something fails here
no_tcl=true
AC_ARG_WITH(tcl,
AC_HELP_STRING([--with-tcl],
[directory containing tcl configuration (tclConfig.sh)]),
with_tclconfig=${withval})
AC_MSG_CHECKING([for Tcl configuration])
AC_CACHE_VAL(ac_cv_c_tclconfig,[
# First check to see if --with-tcl was specified.
if test x"${with_tclconfig}" != x ; then
case ${with_tclconfig} in
*/tclConfig.sh )
if test -f ${with_tclconfig}; then
AC_MSG_WARN([--with-tcl argument should refer to directory containing tclConfig.sh, not to tclConfig.sh itself])
with_tclconfig=`echo ${with_tclconfig} | sed 's!/tclConfig\.sh$!!'`
fi ;;
esac
if test -f "${with_tclconfig}/tclConfig.sh" ; then
ac_cv_c_tclconfig=`(cd ${with_tclconfig}; pwd)`
else
AC_MSG_ERROR([${with_tclconfig} directory doesn't contain tclConfig.sh])
fi
fi
# then check for a private Tcl installation
if test x"${ac_cv_c_tclconfig}" = x ; then
for i in \
../tcl \
`ls -dr ../tcl[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \
`ls -dr ../tcl[[8-9]].[[0-9]] 2>/dev/null` \
`ls -dr ../tcl[[8-9]].[[0-9]]* 2>/dev/null` \
../../tcl \
`ls -dr ../../tcl[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \
`ls -dr ../../tcl[[8-9]].[[0-9]] 2>/dev/null` \
`ls -dr ../../tcl[[8-9]].[[0-9]]* 2>/dev/null` \
../../../tcl \
`ls -dr ../../../tcl[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \
`ls -dr ../../../tcl[[8-9]].[[0-9]] 2>/dev/null` \
`ls -dr ../../../tcl[[8-9]].[[0-9]]* 2>/dev/null` ; do
if test -f "$i/unix/tclConfig.sh" ; then
ac_cv_c_tclconfig=`(cd $i/unix; pwd)`
break
fi
done
fi
# on Darwin, check in Framework installation locations
if test "`uname -s`" = "Darwin" -a x"${ac_cv_c_tclconfig}" = x ; then
for i in `ls -d ~/Library/Frameworks 2>/dev/null` \
`ls -d /Library/Frameworks 2>/dev/null` \
`ls -d /Network/Library/Frameworks 2>/dev/null` \
`ls -d /System/Library/Frameworks 2>/dev/null` \
; do
if test -f "$i/Tcl.framework/tclConfig.sh" ; then
ac_cv_c_tclconfig=`(cd $i/Tcl.framework; pwd)`
break
fi
done
fi
# on Windows, check in common installation locations
if test "${TEA_PLATFORM}" = "windows" \
-a x"${ac_cv_c_tclconfig}" = x ; then
for i in `ls -d C:/Tcl/lib 2>/dev/null` \
`ls -d C:/Progra~1/Tcl/lib 2>/dev/null` \
; do
if test -f "$i/tclConfig.sh" ; then
ac_cv_c_tclconfig=`(cd $i; pwd)`
break
fi
done
fi
# check in a few common install locations
if test x"${ac_cv_c_tclconfig}" = x ; then
for i in `ls -d ${libdir} 2>/dev/null` \
`ls -d ${exec_prefix}/lib 2>/dev/null` \
`ls -d ${prefix}/lib 2>/dev/null` \
`ls -d /usr/local/lib 2>/dev/null` \
`ls -d /usr/contrib/lib 2>/dev/null` \
`ls -d /usr/lib 2>/dev/null` \
; do
if test -f "$i/tclConfig.sh" ; then
ac_cv_c_tclconfig=`(cd $i; pwd)`
break
fi
done
fi
# check in a few other private locations
if test x"${ac_cv_c_tclconfig}" = x ; then
for i in \
${srcdir}/../tcl \
`ls -dr ${srcdir}/../tcl[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \
`ls -dr ${srcdir}/../tcl[[8-9]].[[0-9]] 2>/dev/null` \
`ls -dr ${srcdir}/../tcl[[8-9]].[[0-9]]* 2>/dev/null` ; do
if test -f "$i/unix/tclConfig.sh" ; then
ac_cv_c_tclconfig=`(cd $i/unix; pwd)`
break
fi
done
fi
])
if test x"${ac_cv_c_tclconfig}" = x ; then
TCL_BIN_DIR="# no Tcl configs found"
AC_MSG_WARN([Can't find Tcl configuration definitions])
exit 0
else
no_tcl=
TCL_BIN_DIR=${ac_cv_c_tclconfig}
AC_MSG_RESULT([found ${TCL_BIN_DIR}/tclConfig.sh])
fi
fi
])
#------------------------------------------------------------------------
# TEA_PATH_TKCONFIG --
#
# Locate the tkConfig.sh file
#
# Arguments:
# none
#
# Results:
#
# Adds the following arguments to configure:
# --with-tk=...
#
# Defines the following vars:
# TK_BIN_DIR Full path to the directory containing
# the tkConfig.sh file
#------------------------------------------------------------------------
AC_DEFUN([TEA_PATH_TKCONFIG], [
#
# Ok, lets find the tk configuration
# First, look for one uninstalled.
# the alternative search directory is invoked by --with-tk
#
if test x"${no_tk}" = x ; then
# we reset no_tk in case something fails here
no_tk=true
AC_ARG_WITH(tk,
AC_HELP_STRING([--with-tk],
[directory containing tk configuration (tkConfig.sh)]),
with_tkconfig=${withval})
AC_MSG_CHECKING([for Tk configuration])
AC_CACHE_VAL(ac_cv_c_tkconfig,[
# First check to see if --with-tkconfig was specified.
if test x"${with_tkconfig}" != x ; then
case ${with_tkconfig} in
*/tkConfig.sh )
if test -f ${with_tkconfig}; then
AC_MSG_WARN([--with-tk argument should refer to directory containing tkConfig.sh, not to tkConfig.sh itself])
with_tkconfig=`echo ${with_tkconfig} | sed 's!/tkConfig\.sh$!!'`
fi ;;
esac
if test -f "${with_tkconfig}/tkConfig.sh" ; then
ac_cv_c_tkconfig=`(cd ${with_tkconfig}; pwd)`
else
AC_MSG_ERROR([${with_tkconfig} directory doesn't contain tkConfig.sh])
fi
fi
# then check for a private Tk library
if test x"${ac_cv_c_tkconfig}" = x ; then
for i in \
../tk \
`ls -dr ../tk[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \
`ls -dr ../tk[[8-9]].[[0-9]] 2>/dev/null` \
`ls -dr ../tk[[8-9]].[[0-9]]* 2>/dev/null` \
../../tk \
`ls -dr ../../tk[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \
`ls -dr ../../tk[[8-9]].[[0-9]] 2>/dev/null` \
`ls -dr ../../tk[[8-9]].[[0-9]]* 2>/dev/null` \
../../../tk \
`ls -dr ../../../tk[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \
`ls -dr ../../../tk[[8-9]].[[0-9]] 2>/dev/null` \
`ls -dr ../../../tk[[8-9]].[[0-9]]* 2>/dev/null` ; do
if test -f "$i/unix/tkConfig.sh" ; then
ac_cv_c_tkconfig=`(cd $i/unix; pwd)`
break
fi
done
fi
# on Darwin, check in Framework installation locations
if test "`uname -s`" = "Darwin" -a x"${ac_cv_c_tkconfig}" = x ; then
for i in `ls -d ~/Library/Frameworks 2>/dev/null` \
`ls -d /Library/Frameworks 2>/dev/null` \
`ls -d /Network/Library/Frameworks 2>/dev/null` \
`ls -d /System/Library/Frameworks 2>/dev/null` \
; do
if test -f "$i/Tk.framework/tkConfig.sh" ; then
ac_cv_c_tkconfig=`(cd $i/Tk.framework; pwd)`
break
fi
done
fi
# check in a few common install locations
if test x"${ac_cv_c_tkconfig}" = x ; then
for i in `ls -d ${libdir} 2>/dev/null` \
`ls -d ${exec_prefix}/lib 2>/dev/null` \
`ls -d ${prefix}/lib 2>/dev/null` \
`ls -d /usr/local/lib 2>/dev/null` \
`ls -d /usr/contrib/lib 2>/dev/null` \
`ls -d /usr/lib 2>/dev/null` \
; do
if test -f "$i/tkConfig.sh" ; then
ac_cv_c_tkconfig=`(cd $i; pwd)`
break
fi
done
fi
# on Windows, check in common installation locations
if test "${TEA_PLATFORM}" = "windows" \
-a x"${ac_cv_c_tkconfig}" = x ; then
for i in `ls -d C:/Tcl/lib 2>/dev/null` \
`ls -d C:/Progra~1/Tcl/lib 2>/dev/null` \
; do
if test -f "$i/tkConfig.sh" ; then
ac_cv_c_tkconfig=`(cd $i; pwd)`
break
fi
done
fi
# check in a few other private locations
if test x"${ac_cv_c_tkconfig}" = x ; then
for i in \
${srcdir}/../tk \
`ls -dr ${srcdir}/../tk[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \
`ls -dr ${srcdir}/../tk[[8-9]].[[0-9]] 2>/dev/null` \
`ls -dr ${srcdir}/../tk[[8-9]].[[0-9]]* 2>/dev/null` ; do
if test -f "$i/unix/tkConfig.sh" ; then
ac_cv_c_tkconfig=`(cd $i/unix; pwd)`
break
fi
done
fi
])
if test x"${ac_cv_c_tkconfig}" = x ; then
TK_BIN_DIR="# no Tk configs found"
AC_MSG_WARN([Can't find Tk configuration definitions])
exit 0
else
no_tk=
TK_BIN_DIR=${ac_cv_c_tkconfig}
AC_MSG_RESULT([found ${TK_BIN_DIR}/tkConfig.sh])
fi
fi
])
#------------------------------------------------------------------------
# TEA_LOAD_TCLCONFIG --
#
# Load the tclConfig.sh file
#
# Arguments:
#
# Requires the following vars to be set:
# TCL_BIN_DIR
#
# Results:
#
# Subst the following vars:
# TCL_BIN_DIR
# TCL_SRC_DIR
# TCL_LIB_FILE
#
#------------------------------------------------------------------------
AC_DEFUN([TEA_LOAD_TCLCONFIG], [
AC_MSG_CHECKING([for existence of ${TCL_BIN_DIR}/tclConfig.sh])
if test -f "${TCL_BIN_DIR}/tclConfig.sh" ; then
AC_MSG_RESULT([loading])
. "${TCL_BIN_DIR}/tclConfig.sh"
else
AC_MSG_RESULT([could not find ${TCL_BIN_DIR}/tclConfig.sh])
fi
# eval is required to do the TCL_DBGX substitution
eval "TCL_LIB_FILE=\"${TCL_LIB_FILE}\""
eval "TCL_STUB_LIB_FILE=\"${TCL_STUB_LIB_FILE}\""
# If the TCL_BIN_DIR is the build directory (not the install directory),
# then set the common variable name to the value of the build variables.
# For example, the variable TCL_LIB_SPEC will be set to the value
# of TCL_BUILD_LIB_SPEC. An extension should make use of TCL_LIB_SPEC
# instead of TCL_BUILD_LIB_SPEC since it will work with both an
# installed and uninstalled version of Tcl.
if test -f "${TCL_BIN_DIR}/Makefile" ; then
TCL_LIB_SPEC=${TCL_BUILD_LIB_SPEC}
TCL_STUB_LIB_SPEC=${TCL_BUILD_STUB_LIB_SPEC}
TCL_STUB_LIB_PATH=${TCL_BUILD_STUB_LIB_PATH}
elif test "`uname -s`" = "Darwin"; then
# If Tcl was built as a framework, attempt to use the libraries
# from the framework at the given location so that linking works
# against Tcl.framework installed in an arbitary location.
case ${TCL_DEFS} in
*TCL_FRAMEWORK*)
if test -f "${TCL_BIN_DIR}/${TCL_LIB_FILE}"; then
for i in "`cd ${TCL_BIN_DIR}; pwd`" \
"`cd ${TCL_BIN_DIR}/../..; pwd`"; do
if test "`basename "$i"`" = "${TCL_LIB_FILE}.framework"; then
TCL_LIB_SPEC="-F`dirname "$i"` -framework ${TCL_LIB_FILE}"
break
fi
done
fi
if test -f "${TCL_BIN_DIR}/${TCL_STUB_LIB_FILE}"; then
TCL_STUB_LIB_SPEC="-L${TCL_BIN_DIR} ${TCL_STUB_LIB_FLAG}"
TCL_STUB_LIB_PATH="${TCL_BIN_DIR}/${TCL_STUB_LIB_FILE}"
fi
;;
esac
fi
# eval is required to do the TCL_DBGX substitution
eval "TCL_LIB_FLAG=\"${TCL_LIB_FLAG}\""
eval "TCL_LIB_SPEC=\"${TCL_LIB_SPEC}\""
eval "TCL_STUB_LIB_FLAG=\"${TCL_STUB_LIB_FLAG}\""
eval "TCL_STUB_LIB_SPEC=\"${TCL_STUB_LIB_SPEC}\""
AC_SUBST(TCL_VERSION)
AC_SUBST(TCL_BIN_DIR)
AC_SUBST(TCL_SRC_DIR)
AC_SUBST(TCL_LIB_FILE)
AC_SUBST(TCL_LIB_FLAG)
AC_SUBST(TCL_LIB_SPEC)
AC_SUBST(TCL_STUB_LIB_FILE)
AC_SUBST(TCL_STUB_LIB_FLAG)
AC_SUBST(TCL_STUB_LIB_SPEC)
AC_SUBST(TCL_LIBS)
AC_SUBST(TCL_DEFS)
AC_SUBST(TCL_EXTRA_CFLAGS)
AC_SUBST(TCL_LD_FLAGS)
AC_SUBST(TCL_SHLIB_LD_LIBS)
])
#------------------------------------------------------------------------
# TEA_LOAD_TKCONFIG --
#
# Load the tkConfig.sh file
#
# Arguments:
#
# Requires the following vars to be set:
# TK_BIN_DIR
#
# Results:
#
# Sets the following vars that should be in tkConfig.sh:
# TK_BIN_DIR
#------------------------------------------------------------------------
AC_DEFUN([TEA_LOAD_TKCONFIG], [
AC_MSG_CHECKING([for existence of ${TK_BIN_DIR}/tkConfig.sh])
if test -f "${TK_BIN_DIR}/tkConfig.sh" ; then
AC_MSG_RESULT([loading])
. "${TK_BIN_DIR}/tkConfig.sh"
else
AC_MSG_RESULT([could not find ${TK_BIN_DIR}/tkConfig.sh])
fi
# eval is required to do the TK_DBGX substitution
eval "TK_LIB_FILE=\"${TK_LIB_FILE}\""
eval "TK_STUB_LIB_FILE=\"${TK_STUB_LIB_FILE}\""
# If the TK_BIN_DIR is the build directory (not the install directory),
# then set the common variable name to the value of the build variables.
# For example, the variable TK_LIB_SPEC will be set to the value
# of TK_BUILD_LIB_SPEC. An extension should make use of TK_LIB_SPEC
# instead of TK_BUILD_LIB_SPEC since it will work with both an
# installed and uninstalled version of Tcl.
if test -f "${TK_BIN_DIR}/Makefile" ; then
TK_LIB_SPEC=${TK_BUILD_LIB_SPEC}
TK_STUB_LIB_SPEC=${TK_BUILD_STUB_LIB_SPEC}
TK_STUB_LIB_PATH=${TK_BUILD_STUB_LIB_PATH}
elif test "`uname -s`" = "Darwin"; then
# If Tk was built as a framework, attempt to use the libraries
# from the framework at the given location so that linking works
# against Tk.framework installed in an arbitary location.
case ${TK_DEFS} in
*TK_FRAMEWORK*)
if test -f "${TK_BIN_DIR}/${TK_LIB_FILE}"; then
for i in "`cd ${TK_BIN_DIR}; pwd`" \
"`cd ${TK_BIN_DIR}/../..; pwd`"; do
if test "`basename "$i"`" = "${TK_LIB_FILE}.framework"; then
TK_LIB_SPEC="-F`dirname "$i"` -framework ${TK_LIB_FILE}"
break
fi
done
fi
if test -f "${TK_BIN_DIR}/${TK_STUB_LIB_FILE}"; then
TK_STUB_LIB_SPEC="-L${TK_BIN_DIR} ${TK_STUB_LIB_FLAG}"
TK_STUB_LIB_PATH="${TK_BIN_DIR}/${TK_STUB_LIB_FILE}"
fi
;;
esac
fi
# eval is required to do the TK_DBGX substitution
eval "TK_LIB_FLAG=\"${TK_LIB_FLAG}\""
eval "TK_LIB_SPEC=\"${TK_LIB_SPEC}\""
eval "TK_STUB_LIB_FLAG=\"${TK_STUB_LIB_FLAG}\""
eval "TK_STUB_LIB_SPEC=\"${TK_STUB_LIB_SPEC}\""
# Ensure windowingsystem is defined
if test "${TEA_PLATFORM}" = "unix" ; then
case ${TK_DEFS} in
*MAC_OSX_TK*)
AC_DEFINE(MAC_OSX_TK, 1, [Are we building against Mac OS X TkAqua?])
TEA_WINDOWINGSYSTEM="aqua"
;;
*)
TEA_WINDOWINGSYSTEM="x11"
;;
esac
elif test "${TEA_PLATFORM}" = "windows" ; then
TEA_WINDOWINGSYSTEM="win32"
fi
AC_SUBST(TK_VERSION)
AC_SUBST(TK_BIN_DIR)
AC_SUBST(TK_SRC_DIR)
AC_SUBST(TK_LIB_FILE)
AC_SUBST(TK_LIB_FLAG)
AC_SUBST(TK_LIB_SPEC)
AC_SUBST(TK_STUB_LIB_FILE)
AC_SUBST(TK_STUB_LIB_FLAG)
AC_SUBST(TK_STUB_LIB_SPEC)
AC_SUBST(TK_LIBS)
AC_SUBST(TK_XINCLUDES)
])
#------------------------------------------------------------------------
# TEA_ENABLE_SHARED --
#
# Allows the building of shared libraries
#
# Arguments:
# none
#
# Results:
#
# Adds the following arguments to configure:
# --enable-shared=yes|no
#
# Defines the following vars:
# STATIC_BUILD Used for building import/export libraries
# on Windows.
#
# Sets the following vars:
# SHARED_BUILD Value of 1 or 0
#------------------------------------------------------------------------
AC_DEFUN([TEA_ENABLE_SHARED], [
AC_MSG_CHECKING([how to build libraries])
AC_ARG_ENABLE(shared,
AC_HELP_STRING([--enable-shared],
[build and link with shared libraries (default: on)]),
[tcl_ok=$enableval], [tcl_ok=yes])
if test "${enable_shared+set}" = set; then
enableval="$enable_shared"
tcl_ok=$enableval
else
tcl_ok=yes
fi
if test "$tcl_ok" = "yes" ; then
AC_MSG_RESULT([shared])
SHARED_BUILD=1
else
AC_MSG_RESULT([static])
SHARED_BUILD=0
AC_DEFINE(STATIC_BUILD, 1, [Is this a static build?])
fi
AC_SUBST(SHARED_BUILD)
])
#------------------------------------------------------------------------
# TEA_ENABLE_THREADS --
#
# Specify if thread support should be enabled. If "yes" is specified
# as an arg (optional), threads are enabled by default, "no" means
# threads are disabled. "yes" is the default.
#
# TCL_THREADS is checked so that if you are compiling an extension
# against a threaded core, your extension must be compiled threaded
# as well.
#
# Note that it is legal to have a thread enabled extension run in a
# threaded or non-threaded Tcl core, but a non-threaded extension may
# only run in a non-threaded Tcl core.
#
# Arguments:
# none
#
# Results:
#
# Adds the following arguments to configure:
# --enable-threads
#
# Sets the following vars:
# THREADS_LIBS Thread library(s)
#
# Defines the following vars:
# TCL_THREADS
# _REENTRANT
# _THREAD_SAFE
#
#------------------------------------------------------------------------
AC_DEFUN([TEA_ENABLE_THREADS], [
AC_ARG_ENABLE(threads,
AC_HELP_STRING([--enable-threads],
[build with threads]),
[tcl_ok=$enableval], [tcl_ok=yes])
if test "${enable_threads+set}" = set; then
enableval="$enable_threads"
tcl_ok=$enableval
else
tcl_ok=yes
fi
if test "$tcl_ok" = "yes" -o "${TCL_THREADS}" = 1; then
TCL_THREADS=1
if test "${TEA_PLATFORM}" != "windows" ; then
# We are always OK on Windows, so check what this platform wants:
# USE_THREAD_ALLOC tells us to try the special thread-based
# allocator that significantly reduces lock contention
AC_DEFINE(USE_THREAD_ALLOC, 1,
[Do we want to use the threaded memory allocator?])
AC_DEFINE(_REENTRANT, 1, [Do we want the reentrant OS API?])
if test "`uname -s`" = "SunOS" ; then
AC_DEFINE(_POSIX_PTHREAD_SEMANTICS, 1,
[Do we really want to follow the standard? Yes we do!])
fi
AC_DEFINE(_THREAD_SAFE, 1, [Do we want the thread-safe OS API?])
AC_CHECK_LIB(pthread,pthread_mutex_init,tcl_ok=yes,tcl_ok=no)
if test "$tcl_ok" = "no"; then
# Check a little harder for __pthread_mutex_init in the same
# library, as some systems hide it there until pthread.h is
# defined. We could alternatively do an AC_TRY_COMPILE with
# pthread.h, but that will work with libpthread really doesn't
# exist, like AIX 4.2. [Bug: 4359]
AC_CHECK_LIB(pthread, __pthread_mutex_init,
tcl_ok=yes, tcl_ok=no)
fi
if test "$tcl_ok" = "yes"; then
# The space is needed
THREADS_LIBS=" -lpthread"
else
AC_CHECK_LIB(pthreads, pthread_mutex_init,
tcl_ok=yes, tcl_ok=no)
if test "$tcl_ok" = "yes"; then
# The space is needed
THREADS_LIBS=" -lpthreads"
else
AC_CHECK_LIB(c, pthread_mutex_init,
tcl_ok=yes, tcl_ok=no)
if test "$tcl_ok" = "no"; then
AC_CHECK_LIB(c_r, pthread_mutex_init,
tcl_ok=yes, tcl_ok=no)
if test "$tcl_ok" = "yes"; then
# The space is needed
THREADS_LIBS=" -pthread"
else
TCL_THREADS=0
AC_MSG_WARN([Do not know how to find pthread lib on your system - thread support disabled])
fi
fi
fi
fi
fi
else
TCL_THREADS=0
fi
# Do checking message here to not mess up interleaved configure output
AC_MSG_CHECKING([for building with threads])
if test "${TCL_THREADS}" = 1; then
AC_DEFINE(TCL_THREADS, 1, [Are we building with threads enabled?])
AC_MSG_RESULT([yes (default)])
else
AC_MSG_RESULT([no])
fi
# TCL_THREADS sanity checking. See if our request for building with
# threads is the same as the way Tcl was built. If not, warn the user.
case ${TCL_DEFS} in
*THREADS=1*)
if test "${TCL_THREADS}" = "0"; then
AC_MSG_WARN([
Building ${PACKAGE_NAME} without threads enabled, but building against Tcl
that IS thread-enabled. It is recommended to use --enable-threads.])
fi
;;
*)
if test "${TCL_THREADS}" = "1"; then
AC_MSG_WARN([
--enable-threads requested, but building against a Tcl that is NOT
thread-enabled. This is an OK configuration that will also run in
a thread-enabled core.])
fi
;;
esac
AC_SUBST(TCL_THREADS)
])
#------------------------------------------------------------------------
# TEA_ENABLE_SYMBOLS --
#
# Specify if debugging symbols should be used.
# Memory (TCL_MEM_DEBUG) debugging can also be enabled.
#
# Arguments:
# none
#
# TEA varies from core Tcl in that C|LDFLAGS_DEFAULT receives
# the value of C|LDFLAGS_OPTIMIZE|DEBUG already substituted.
# Requires the following vars to be set in the Makefile:
# CFLAGS_DEFAULT
# LDFLAGS_DEFAULT
#
# Results:
#
# Adds the following arguments to configure:
# --enable-symbols
#
# Defines the following vars:
# CFLAGS_DEFAULT Sets to $(CFLAGS_DEBUG) if true
# Sets to $(CFLAGS_OPTIMIZE) if false
# LDFLAGS_DEFAULT Sets to $(LDFLAGS_DEBUG) if true
# Sets to $(LDFLAGS_OPTIMIZE) if false
# DBGX Formerly used as debug library extension;
# always blank now.
#
#------------------------------------------------------------------------
AC_DEFUN([TEA_ENABLE_SYMBOLS], [
dnl Make sure we are initialized
AC_REQUIRE([TEA_CONFIG_CFLAGS])
AC_MSG_CHECKING([for build with symbols])
AC_ARG_ENABLE(symbols,
AC_HELP_STRING([--enable-symbols],
[build with debugging symbols (default: off)]),
[tcl_ok=$enableval], [tcl_ok=no])
DBGX=""
if test "$tcl_ok" = "no"; then
CFLAGS_DEFAULT="${CFLAGS_OPTIMIZE}"
LDFLAGS_DEFAULT="${LDFLAGS_OPTIMIZE}"
AC_MSG_RESULT([no])
else
CFLAGS_DEFAULT="${CFLAGS_DEBUG}"
LDFLAGS_DEFAULT="${LDFLAGS_DEBUG}"
if test "$tcl_ok" = "yes"; then
AC_MSG_RESULT([yes (standard debugging)])
fi
fi
if test "${TEA_PLATFORM}" != "windows" ; then
LDFLAGS_DEFAULT="${LDFLAGS}"
fi
AC_SUBST(TCL_DBGX)
AC_SUBST(CFLAGS_DEFAULT)
AC_SUBST(LDFLAGS_DEFAULT)
if test "$tcl_ok" = "mem" -o "$tcl_ok" = "all"; then
AC_DEFINE(TCL_MEM_DEBUG, 1, [Is memory debugging enabled?])
fi
if test "$tcl_ok" != "yes" -a "$tcl_ok" != "no"; then
if test "$tcl_ok" = "all"; then
AC_MSG_RESULT([enabled symbols mem debugging])
else
AC_MSG_RESULT([enabled $tcl_ok debugging])
fi
fi
])
#------------------------------------------------------------------------
# TEA_ENABLE_LANGINFO --
#
# Allows use of modern nl_langinfo check for better l10n.
# This is only relevant for Unix.
#
# Arguments:
# none
#
# Results:
#
# Adds the following arguments to configure:
# --enable-langinfo=yes|no (default is yes)
#
# Defines the following vars:
# HAVE_LANGINFO Triggers use of nl_langinfo if defined.
#
#------------------------------------------------------------------------
AC_DEFUN([TEA_ENABLE_LANGINFO], [
AC_ARG_ENABLE(langinfo,
AC_HELP_STRING([--enable-langinfo],
[use nl_langinfo if possible to determine encoding at startup, otherwise use old heuristic (default: on)]),
[langinfo_ok=$enableval], [langinfo_ok=yes])
HAVE_LANGINFO=0
if test "$langinfo_ok" = "yes"; then
AC_CHECK_HEADER(langinfo.h,[langinfo_ok=yes],[langinfo_ok=no])
fi
AC_MSG_CHECKING([whether to use nl_langinfo])
if test "$langinfo_ok" = "yes"; then
AC_CACHE_VAL(tcl_cv_langinfo_h, [
AC_TRY_COMPILE([#include <langinfo.h>], [nl_langinfo(CODESET);],
[tcl_cv_langinfo_h=yes],[tcl_cv_langinfo_h=no])])
AC_MSG_RESULT([$tcl_cv_langinfo_h])
if test $tcl_cv_langinfo_h = yes; then
AC_DEFINE(HAVE_LANGINFO, 1, [Do we have nl_langinfo()?])
fi
else
AC_MSG_RESULT([$langinfo_ok])
fi
])
#--------------------------------------------------------------------
# TEA_CONFIG_SYSTEM
#
# Determine what the system is (some things cannot be easily checked
# on a feature-driven basis, alas). This can usually be done via the
# "uname" command, but there are a few systems, like Next, where
# this doesn't work.
#
# Arguments:
# none
#
# Results:
# Defines the following var:
#
# system - System/platform/version identification code.
#
#--------------------------------------------------------------------
AC_DEFUN([TEA_CONFIG_SYSTEM], [
AC_CACHE_CHECK([system version], tcl_cv_sys_version, [
if test "${TEA_PLATFORM}" = "windows" ; then
tcl_cv_sys_version=windows
elif test -f /usr/lib/NextStep/software_version; then
tcl_cv_sys_version=NEXTSTEP-`awk '/3/,/3/' /usr/lib/NextStep/software_version`
else
tcl_cv_sys_version=`uname -s`-`uname -r`
if test "$?" -ne 0 ; then
AC_MSG_WARN([can't find uname command])
tcl_cv_sys_version=unknown
else
# Special check for weird MP-RAS system (uname returns weird
# results, and the version is kept in special file).
if test -r /etc/.relid -a "X`uname -n`" = "X`uname -s`" ; then
tcl_cv_sys_version=MP-RAS-`awk '{print $[3]}' /etc/.relid`
fi
if test "`uname -s`" = "AIX" ; then
tcl_cv_sys_version=AIX-`uname -v`.`uname -r`
fi
fi
fi
])
system=$tcl_cv_sys_version
])
#--------------------------------------------------------------------
# TEA_CONFIG_CFLAGS
#
# Try to determine the proper flags to pass to the compiler
# for building shared libraries and other such nonsense.
#
# Arguments:
# none
#
# Results:
#
# Defines and substitutes the following vars:
#
# DL_OBJS - Name of the object file that implements dynamic
# loading for Tcl on this system.
# DL_LIBS - Library file(s) to include in tclsh and other base
# applications in order for the "load" command to work.
# LDFLAGS - Flags to pass to the compiler when linking object
# files into an executable application binary such
# as tclsh.
# LD_SEARCH_FLAGS-Flags to pass to ld, such as "-R /usr/local/tcl/lib",
# that tell the run-time dynamic linker where to look
# for shared libraries such as libtcl.so. Depends on
# the variable LIB_RUNTIME_DIR in the Makefile. Could
# be the same as CC_SEARCH_FLAGS if ${CC} is used to link.
# CC_SEARCH_FLAGS-Flags to pass to ${CC}, such as "-Wl,-rpath,/usr/local/tcl/lib",
# that tell the run-time dynamic linker where to look
# for shared libraries such as libtcl.so. Depends on
# the variable LIB_RUNTIME_DIR in the Makefile.
# SHLIB_CFLAGS - Flags to pass to cc when compiling the components
# of a shared library (may request position-independent
# code, among other things).
# SHLIB_LD - Base command to use for combining object files
# into a shared library.
# SHLIB_LD_LIBS - Dependent libraries for the linker to scan when
# creating shared libraries. This symbol typically
# goes at the end of the "ld" commands that build
# shared libraries. The value of the symbol is
# "${LIBS}" if all of the dependent libraries should
# be specified when creating a shared library. If
# dependent libraries should not be specified (as on
# SunOS 4.x, where they cause the link to fail, or in
# general if Tcl and Tk aren't themselves shared
# libraries), then this symbol has an empty string
# as its value.
# SHLIB_SUFFIX - Suffix to use for the names of dynamically loadable
# extensions. An empty string means we don't know how
# to use shared libraries on this platform.
# LIB_SUFFIX - Specifies everything that comes after the "libfoo"
# in a static or shared library name, using the $VERSION variable
# to put the version in the right place. This is used
# by platforms that need non-standard library names.
# Examples: ${VERSION}.so.1.1 on NetBSD, since it needs
# to have a version after the .so, and ${VERSION}.a
# on AIX, since a shared library needs to have
# a .a extension whereas shared objects for loadable
# extensions have a .so extension. Defaults to
# ${VERSION}${SHLIB_SUFFIX}.
# TCL_NEEDS_EXP_FILE -
# 1 means that an export file is needed to link to a
# shared library.
# TCL_EXP_FILE - The name of the installed export / import file which
# should be used to link to the Tcl shared library.
# Empty if Tcl is unshared.
# TCL_BUILD_EXP_FILE -
# The name of the built export / import file which
# should be used to link to the Tcl shared library.
# Empty if Tcl is unshared.
# CFLAGS_DEBUG -
# Flags used when running the compiler in debug mode
# CFLAGS_OPTIMIZE -
# Flags used when running the compiler in optimize mode
# CFLAGS - Additional CFLAGS added as necessary (usually 64-bit)
#
#--------------------------------------------------------------------
AC_DEFUN([TEA_CONFIG_CFLAGS], [
dnl Make sure we are initialized
AC_REQUIRE([TEA_INIT])
# Step 0.a: Enable 64 bit support?
AC_MSG_CHECKING([if 64bit support is requested])
AC_ARG_ENABLE(64bit,
AC_HELP_STRING([--enable-64bit],
[enable 64bit support (default: off)]),
[do64bit=$enableval], [do64bit=no])
AC_MSG_RESULT([$do64bit])
# Step 0.b: Enable Solaris 64 bit VIS support?
AC_MSG_CHECKING([if 64bit Sparc VIS support is requested])
AC_ARG_ENABLE(64bit-vis,
AC_HELP_STRING([--enable-64bit-vis],
[enable 64bit Sparc VIS support (default: off)]),
[do64bitVIS=$enableval], [do64bitVIS=no])
AC_MSG_RESULT([$do64bitVIS])
if test "$do64bitVIS" = "yes"; then
# Force 64bit on with VIS
do64bit=yes
fi
# Step 0.c: Cross-compiling options for Windows/CE builds?
if test "${TEA_PLATFORM}" = "windows" ; then
AC_MSG_CHECKING([if Windows/CE build is requested])
AC_ARG_ENABLE(wince,[ --enable-wince enable Win/CE support (where applicable)], [doWince=$enableval], [doWince=no])
AC_MSG_RESULT([$doWince])
fi
# Step 1: set the variable "system" to hold the name and version number
# for the system.
TEA_CONFIG_SYSTEM
# Step 2: check for existence of -ldl library. This is needed because
# Linux can use either -ldl or -ldld for dynamic loading.
AC_CHECK_LIB(dl, dlopen, have_dl=yes, have_dl=no)
# Require ranlib early so we can override it in special cases below.
AC_REQUIRE([AC_PROG_RANLIB])
# Step 3: set configuration options based on system name and version.
# This is similar to Tcl's unix/tcl.m4 except that we've added a
# "windows" case.
do64bit_ok=no
LDFLAGS_ORIG="$LDFLAGS"
# When ld needs options to work in 64-bit mode, put them in
# LDFLAGS_ARCH so they eventually end up in LDFLAGS even if [load]
# is disabled by the user. [Bug 1016796]
LDFLAGS_ARCH=""
TCL_EXPORT_FILE_SUFFIX=""
UNSHARED_LIB_SUFFIX=""
TCL_TRIM_DOTS='`echo ${PACKAGE_VERSION} | tr -d .`'
ECHO_VERSION='`echo ${PACKAGE_VERSION}`'
TCL_LIB_VERSIONS_OK=ok
CFLAGS_DEBUG=-g
CFLAGS_OPTIMIZE=-O
if test "$GCC" = "yes" ; then
CFLAGS_OPTIMIZE=-O2
CFLAGS_WARNING="-Wall -Wno-implicit-int"
else
CFLAGS_WARNING=""
fi
TCL_NEEDS_EXP_FILE=0
TCL_BUILD_EXP_FILE=""
TCL_EXP_FILE=""
dnl FIXME: Replace AC_CHECK_PROG with AC_CHECK_TOOL once cross compiling is fixed.
dnl AC_CHECK_TOOL(AR, ar)
AC_CHECK_PROG(AR, ar, ar)
STLIB_LD='${AR} cr'
LD_LIBRARY_PATH_VAR="LD_LIBRARY_PATH"
case $system in
windows)
# This is a 2-stage check to make sure we have the 64-bit SDK
# We have to know where the SDK is installed.
# This magic is based on MS Platform SDK for Win2003 SP1 - hobbs
# MACHINE is IX86 for LINK, but this is used by the manifest,
# which requires x86|amd64|ia64.
MACHINE="X86"
if test "$do64bit" != "no" ; then
if test "x${MSSDK}x" = "xx" ; then
MSSDK="C:/Progra~1/Microsoft Platform SDK"
fi
MSSDK=`echo "$MSSDK" | sed -e 's!\\\!/!g'`
PATH64=""
case "$do64bit" in
amd64|x64|yes)
MACHINE="AMD64" ; # default to AMD64 64-bit build
PATH64="${MSSDK}/Bin/Win64/x86/AMD64"
;;
ia64)
MACHINE="IA64"
PATH64="${MSSDK}/Bin/Win64"
;;
esac
if test ! -d "${PATH64}" ; then
AC_MSG_WARN([Could not find 64-bit $MACHINE SDK to enable 64bit mode])
AC_MSG_WARN([Ensure latest Platform SDK is installed])
do64bit="no"
else
AC_MSG_RESULT([ Using 64-bit $MACHINE mode])
do64bit_ok="yes"
fi
fi
if test "$doWince" != "no" ; then
if test "$do64bit" != "no" ; then
AC_MSG_ERROR([Windows/CE and 64-bit builds incompatible])
fi
if test "$GCC" = "yes" ; then
AC_MSG_ERROR([Windows/CE and GCC builds incompatible])
fi
TEA_PATH_CELIB
# Set defaults for common evc4/PPC2003 setup
# Currently Tcl requires 300+, possibly 420+ for sockets
CEVERSION=420; # could be 211 300 301 400 420 ...
TARGETCPU=ARMV4; # could be ARMV4 ARM MIPS SH3 X86 ...
ARCH=ARM; # could be ARM MIPS X86EM ...
PLATFORM="Pocket PC 2003"; # or "Pocket PC 2002"
if test "$doWince" != "yes"; then
# If !yes then the user specified something
# Reset ARCH to allow user to skip specifying it
ARCH=
eval `echo $doWince | awk -F, '{ \
if (length([$]1)) { printf "CEVERSION=\"%s\"\n", [$]1; \
if ([$]1 < 400) { printf "PLATFORM=\"Pocket PC 2002\"\n" } }; \
if (length([$]2)) { printf "TARGETCPU=\"%s\"\n", toupper([$]2) }; \
if (length([$]3)) { printf "ARCH=\"%s\"\n", toupper([$]3) }; \
if (length([$]4)) { printf "PLATFORM=\"%s\"\n", [$]4 }; \
}'`
if test "x${ARCH}" = "x" ; then
ARCH=$TARGETCPU;
fi
fi
OSVERSION=WCE$CEVERSION;
if test "x${WCEROOT}" = "x" ; then
WCEROOT="C:/Program Files/Microsoft eMbedded C++ 4.0"
if test ! -d "${WCEROOT}" ; then
WCEROOT="C:/Program Files/Microsoft eMbedded Tools"
fi
fi
if test "x${SDKROOT}" = "x" ; then
SDKROOT="C:/Program Files/Windows CE Tools"
if test ! -d "${SDKROOT}" ; then
SDKROOT="C:/Windows CE Tools"
fi
fi
WCEROOT=`echo "$WCEROOT" | sed -e 's!\\\!/!g'`
SDKROOT=`echo "$SDKROOT" | sed -e 's!\\\!/!g'`
if test ! -d "${SDKROOT}/${OSVERSION}/${PLATFORM}/Lib/${TARGETCPU}" \
-o ! -d "${WCEROOT}/EVC/${OSVERSION}/bin"; then
AC_MSG_ERROR([could not find PocketPC SDK or target compiler to enable WinCE mode [$CEVERSION,$TARGETCPU,$ARCH,$PLATFORM]])
doWince="no"
else
# We could PATH_NOSPACE these, but that's not important,
# as long as we quote them when used.
CEINCLUDE="${SDKROOT}/${OSVERSION}/${PLATFORM}/include"
if test -d "${CEINCLUDE}/${TARGETCPU}" ; then
CEINCLUDE="${CEINCLUDE}/${TARGETCPU}"
fi
CELIBPATH="${SDKROOT}/${OSVERSION}/${PLATFORM}/Lib/${TARGETCPU}"
fi
fi
if test "$GCC" != "yes" ; then
if test "${SHARED_BUILD}" = "0" ; then
runtime=-MT
else
runtime=-MD
fi
if test "$do64bit" != "no" ; then
# All this magic is necessary for the Win64 SDK RC1 - hobbs
CC="\"${PATH64}/cl.exe\""
CFLAGS="${CFLAGS} -I\"${MSSDK}/Include\" -I\"${MSSDK}/Include/crt\" -I\"${MSSDK}/Include/crt/sys\""
RC="\"${MSSDK}/bin/rc.exe\""
lflags="-nologo -MACHINE:${MACHINE} -LIBPATH:\"${MSSDK}/Lib/${MACHINE}\""
LINKBIN="\"${PATH64}/link.exe\""
CFLAGS_DEBUG="-nologo -Zi -Od -W3 ${runtime}d"
CFLAGS_OPTIMIZE="-nologo -O2 -W2 ${runtime}"
# Avoid 'unresolved external symbol __security_cookie'
# errors, c.f. http://support.microsoft.com/?id=894573
TEA_ADD_LIBS([bufferoverflowU.lib])
elif test "$doWince" != "no" ; then
CEBINROOT="${WCEROOT}/EVC/${OSVERSION}/bin"
if test "${TARGETCPU}" = "X86"; then
CC="\"${CEBINROOT}/cl.exe\""
else
CC="\"${CEBINROOT}/cl${ARCH}.exe\""
fi
CFLAGS="$CFLAGS -I\"${CELIB_DIR}/inc\" -I\"${CEINCLUDE}\""
RC="\"${WCEROOT}/Common/EVC/bin/rc.exe\""
arch=`echo ${ARCH} | awk '{print tolower([$]0)}'`
defs="${ARCH} _${ARCH}_ ${arch} PALM_SIZE _MT _WINDOWS"
if test "${SHARED_BUILD}" = "1" ; then
# Static CE builds require static celib as well
defs="${defs} _DLL"
fi
for i in $defs ; do
AC_DEFINE_UNQUOTED($i, 1, [WinCE def ]$i)
done
AC_DEFINE_UNQUOTED(_WIN32_WCE, $CEVERSION, [_WIN32_WCE version])
AC_DEFINE_UNQUOTED(UNDER_CE, $CEVERSION, [UNDER_CE version])
CFLAGS_DEBUG="-nologo -Zi -Od"
CFLAGS_OPTIMIZE="-nologo -Ox"
lversion=`echo ${CEVERSION} | sed -e 's/\(.\)\(..\)/\1\.\2/'`
lflags="-MACHINE:${ARCH} -LIBPATH:\"${CELIBPATH}\" -subsystem:windowsce,${lversion} -nologo"
LINKBIN="\"${CEBINROOT}/link.exe\""
AC_SUBST(CELIB_DIR)
else
RC="rc"
lflags="-nologo"
LINKBIN="link"
CFLAGS_DEBUG="-nologo -Z7 -Od -W3 -WX ${runtime}d"
CFLAGS_OPTIMIZE="-nologo -O2 -W2 ${runtime}"
fi
fi
if test "$GCC" = "yes"; then
# mingw gcc mode
RC="windres"
CFLAGS_DEBUG="-g"
CFLAGS_OPTIMIZE="-O2 -fomit-frame-pointer"
SHLIB_LD="$CC -shared"
UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.a'
LDFLAGS_CONSOLE="-wl,--subsystem,console ${lflags}"
LDFLAGS_WINDOW="-wl,--subsystem,windows ${lflags}"
else
SHLIB_LD="${LINKBIN} -dll ${lflags}"
# link -lib only works when -lib is the first arg
STLIB_LD="${LINKBIN} -lib ${lflags}"
UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.lib'
PATHTYPE=-w
# For information on what debugtype is most useful, see:
# http://msdn.microsoft.com/library/en-us/dnvc60/html/gendepdebug.asp
# This essentially turns it all on.
LDFLAGS_DEBUG="-debug:full -debugtype:both -warn:2"
LDFLAGS_OPTIMIZE="-release"
if test "$doWince" != "no" ; then
LDFLAGS_CONSOLE="-link ${lflags}"
LDFLAGS_WINDOW=${LDFLAGS_CONSOLE}
else
LDFLAGS_CONSOLE="-link -subsystem:console ${lflags}"
LDFLAGS_WINDOW="-link -subsystem:windows ${lflags}"
fi
fi
SHLIB_LD_LIBS='${LIBS}'
SHLIB_SUFFIX=".dll"
SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.dll'
TCL_LIB_VERSIONS_OK=nodots
# Bogus to avoid getting this turned off
DL_OBJS="tclLoadNone.obj"
;;
AIX-*)
if test "${TCL_THREADS}" = "1" -a "$GCC" != "yes" ; then
# AIX requires the _r compiler when gcc isn't being used
case "${CC}" in
*_r)
# ok ...
;;
*)
CC=${CC}_r
;;
esac
AC_MSG_RESULT([Using $CC for compiling with threads])
fi
LIBS="$LIBS -lc"
SHLIB_CFLAGS=""
SHLIB_LD_LIBS='${LIBS}'
SHLIB_SUFFIX=".so"
DL_OBJS="tclLoadDl.o"
LD_LIBRARY_PATH_VAR="LIBPATH"
# Check to enable 64-bit flags for compiler/linker on AIX 4+
if test "$do64bit" = "yes" -a "`uname -v`" -gt "3" ; then
if test "$GCC" = "yes" ; then
AC_MSG_WARN([64bit mode not supported with GCC on $system])
else
do64bit_ok=yes
CFLAGS="$CFLAGS -q64"
LDFLAGS_ARCH="-q64"
RANLIB="${RANLIB} -X64"
AR="${AR} -X64"
SHLIB_LD_FLAGS="-b64"
fi
fi
if test "`uname -m`" = "ia64" ; then
# AIX-5 uses ELF style dynamic libraries on IA-64, but not PPC
SHLIB_LD="/usr/ccs/bin/ld -G -z text"
# AIX-5 has dl* in libc.so
DL_LIBS=""
if test "$GCC" = "yes" ; then
CC_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}'
else
CC_SEARCH_FLAGS='-R${LIB_RUNTIME_DIR}'
fi
LD_SEARCH_FLAGS='-R ${LIB_RUNTIME_DIR}'
else
if test "$GCC" = "yes" ; then
SHLIB_LD="gcc -shared"
else
SHLIB_LD="/bin/ld -bhalt:4 -bM:SRE -bE:lib.exp -H512 -T512 -bnoentry"
fi
SHLIB_LD="${TCL_SRC_DIR}/unix/ldAix ${SHLIB_LD} ${SHLIB_LD_FLAGS}"
DL_LIBS="-ldl"
CC_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}'
LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS}
TCL_NEEDS_EXP_FILE=1
TCL_EXPORT_FILE_SUFFIX='${PACKAGE_VERSION}.exp'
fi
# AIX v<=4.1 has some different flags than 4.2+
if test "$system" = "AIX-4.1" -o "`uname -v`" -lt "4" ; then
AC_LIBOBJ([tclLoadAix])
DL_LIBS="-lld"
fi
# On AIX <=v4 systems, libbsd.a has to be linked in to support
# non-blocking file IO. This library has to be linked in after
# the MATH_LIBS or it breaks the pow() function. The way to
# insure proper sequencing, is to add it to the tail of MATH_LIBS.
# This library also supplies gettimeofday.
#
# AIX does not have a timezone field in struct tm. When the AIX
# bsd library is used, the timezone global and the gettimeofday
# methods are to be avoided for timezone deduction instead, we
# deduce the timezone by comparing the localtime result on a
# known GMT value.
AC_CHECK_LIB(bsd, gettimeofday, libbsd=yes, libbsd=no)
if test $libbsd = yes; then
MATH_LIBS="$MATH_LIBS -lbsd"
AC_DEFINE(USE_DELTA_FOR_TZ, 1, [Do we need a special AIX hack for timezones?])
fi
;;
BeOS*)
SHLIB_CFLAGS="-fPIC"
SHLIB_LD="${CC} -nostart"
SHLIB_LD_LIBS='${LIBS}'
SHLIB_SUFFIX=".so"
DL_OBJS="tclLoadDl.o"
DL_LIBS="-ldl"
#-----------------------------------------------------------
# Check for inet_ntoa in -lbind, for BeOS (which also needs
# -lsocket, even if the network functions are in -lnet which
# is always linked to, for compatibility.
#-----------------------------------------------------------
AC_CHECK_LIB(bind, inet_ntoa, [LIBS="$LIBS -lbind -lsocket"])
;;
BSD/OS-2.1*|BSD/OS-3*)
SHLIB_CFLAGS=""
SHLIB_LD="shlicc -r"
SHLIB_LD_LIBS='${LIBS}'
SHLIB_SUFFIX=".so"
DL_OBJS="tclLoadDl.o"
DL_LIBS="-ldl"
CC_SEARCH_FLAGS=""
LD_SEARCH_FLAGS=""
;;
BSD/OS-4.*)
SHLIB_CFLAGS="-export-dynamic -fPIC"
SHLIB_LD="cc -shared"
SHLIB_LD_LIBS='${LIBS}'
SHLIB_SUFFIX=".so"
DL_OBJS="tclLoadDl.o"
DL_LIBS="-ldl"
LDFLAGS="$LDFLAGS -export-dynamic"
CC_SEARCH_FLAGS=""
LD_SEARCH_FLAGS=""
;;
dgux*)
SHLIB_CFLAGS="-K PIC"
SHLIB_LD="cc -G"
SHLIB_LD_LIBS=""
SHLIB_SUFFIX=".so"
DL_OBJS="tclLoadDl.o"
DL_LIBS="-ldl"
CC_SEARCH_FLAGS=""
LD_SEARCH_FLAGS=""
;;
HP-UX-*.11.*)
# Use updated header definitions where possible
AC_DEFINE(_XOPEN_SOURCE_EXTENDED, 1, [Do we want to use the XOPEN network library?])
# Needed by Tcl, but not most extensions
#AC_DEFINE(_XOPEN_SOURCE, 1, [Do we want to use the XOPEN network library?])
#LIBS="$LIBS -lxnet" # Use the XOPEN network library
if test "`uname -m`" = "ia64" ; then
SHLIB_SUFFIX=".so"
# Use newer C++ library for C++ extensions
#if test "$GCC" != "yes" ; then
# CPPFLAGS="-AA"
#fi
else
SHLIB_SUFFIX=".sl"
fi
AC_CHECK_LIB(dld, shl_load, tcl_ok=yes, tcl_ok=no)
if test "$tcl_ok" = yes; then
SHLIB_CFLAGS="+z"
SHLIB_LD="ld -b"
SHLIB_LD_LIBS='${LIBS}'
DL_OBJS="tclLoadShl.o"
DL_LIBS="-ldld"
LDFLAGS="$LDFLAGS -Wl,-E"
CC_SEARCH_FLAGS='-Wl,+s,+b,${LIB_RUNTIME_DIR}:.'
LD_SEARCH_FLAGS='+s +b ${LIB_RUNTIME_DIR}:.'
LD_LIBRARY_PATH_VAR="SHLIB_PATH"
fi
if test "$GCC" = "yes" ; then
SHLIB_LD="gcc -shared"
SHLIB_LD_LIBS='${LIBS}'
LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS}
fi
# Users may want PA-RISC 1.1/2.0 portable code - needs HP cc
#CFLAGS="$CFLAGS +DAportable"
# Check to enable 64-bit flags for compiler/linker
if test "$do64bit" = "yes" ; then
if test "$GCC" = "yes" ; then
hpux_arch=`${CC} -dumpmachine`
case $hpux_arch in
hppa64*)
# 64-bit gcc in use. Fix flags for GNU ld.
do64bit_ok=yes
SHLIB_LD="${CC} -shared"
SHLIB_LD_LIBS='${LIBS}'
CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}'
LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS}
;;
*)
AC_MSG_WARN([64bit mode not supported with GCC on $system])
;;
esac
else
do64bit_ok=yes
CFLAGS="$CFLAGS +DD64"
LDFLAGS_ARCH="+DD64"
fi
fi
;;
HP-UX-*.08.*|HP-UX-*.09.*|HP-UX-*.10.*)
SHLIB_SUFFIX=".sl"
AC_CHECK_LIB(dld, shl_load, tcl_ok=yes, tcl_ok=no)
if test "$tcl_ok" = yes; then
SHLIB_CFLAGS="+z"
SHLIB_LD="ld -b"
SHLIB_LD_LIBS=""
DL_OBJS="tclLoadShl.o"
DL_LIBS="-ldld"
LDFLAGS="$LDFLAGS -Wl,-E"
CC_SEARCH_FLAGS='-Wl,+s,+b,${LIB_RUNTIME_DIR}:.'
LD_SEARCH_FLAGS='+s +b ${LIB_RUNTIME_DIR}:.'
LD_LIBRARY_PATH_VAR="SHLIB_PATH"
fi
;;
IRIX-5.*)
SHLIB_CFLAGS=""
SHLIB_LD="ld -shared -rdata_shared"
SHLIB_LD_LIBS='${LIBS}'
SHLIB_SUFFIX=".so"
DL_OBJS="tclLoadDl.o"
DL_LIBS=""
CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}'
LD_SEARCH_FLAGS='-rpath ${LIB_RUNTIME_DIR}'
;;
IRIX-6.*)
SHLIB_CFLAGS=""
SHLIB_LD="ld -n32 -shared -rdata_shared"
SHLIB_LD_LIBS='${LIBS}'
SHLIB_SUFFIX=".so"
DL_OBJS="tclLoadDl.o"
DL_LIBS=""
CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}'
LD_SEARCH_FLAGS='-rpath ${LIB_RUNTIME_DIR}'
if test "$GCC" = "yes" ; then
CFLAGS="$CFLAGS -mabi=n32"
LDFLAGS="$LDFLAGS -mabi=n32"
else
case $system in
IRIX-6.3)
# Use to build 6.2 compatible binaries on 6.3.
CFLAGS="$CFLAGS -n32 -D_OLD_TERMIOS"
;;
*)
CFLAGS="$CFLAGS -n32"
;;
esac
LDFLAGS="$LDFLAGS -n32"
fi
;;
IRIX64-6.*)
SHLIB_CFLAGS=""
SHLIB_LD="ld -n32 -shared -rdata_shared"
SHLIB_LD_LIBS='${LIBS}'
SHLIB_SUFFIX=".so"
DL_OBJS="tclLoadDl.o"
DL_LIBS=""
CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}'
LD_SEARCH_FLAGS='-rpath ${LIB_RUNTIME_DIR}'
# Check to enable 64-bit flags for compiler/linker
if test "$do64bit" = "yes" ; then
if test "$GCC" = "yes" ; then
AC_MSG_WARN([64bit mode not supported by gcc])
else
do64bit_ok=yes
SHLIB_LD="ld -64 -shared -rdata_shared"
CFLAGS="$CFLAGS -64"
LDFLAGS_ARCH="-64"
fi
fi
;;
Linux*)
SHLIB_CFLAGS="-fPIC"
SHLIB_LD_LIBS='${LIBS}'
SHLIB_SUFFIX=".so"
CFLAGS_OPTIMIZE="-O2 -fomit-frame-pointer"
# egcs-2.91.66 on Redhat Linux 6.0 generates lots of warnings
# when you inline the string and math operations. Turn this off to
# get rid of the warnings.
#CFLAGS_OPTIMIZE="${CFLAGS_OPTIMIZE} -D__NO_STRING_INLINES -D__NO_MATH_INLINES"
# TEA specific: use LDFLAGS_DEFAULT instead of LDFLAGS here:
SHLIB_LD='${CC} -shared ${CFLAGS} ${LDFLAGS_DEFAULT}'
DL_OBJS="tclLoadDl.o"
DL_LIBS="-ldl"
LDFLAGS="$LDFLAGS -Wl,--export-dynamic"
CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}'
LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS}
if test "`uname -m`" = "alpha" ; then
CFLAGS="$CFLAGS -mieee"
fi
if test $do64bit = yes; then
AC_CACHE_CHECK([if compiler accepts -m64 flag], tcl_cv_cc_m64, [
hold_cflags=$CFLAGS
CFLAGS="$CFLAGS -m64"
AC_TRY_LINK(,, tcl_cv_cc_m64=yes, tcl_cv_cc_m64=no)
CFLAGS=$hold_cflags])
if test $tcl_cv_cc_m64 = yes; then
CFLAGS="$CFLAGS -m64"
do64bit_ok=yes
fi
fi
# The combo of gcc + glibc has a bug related
# to inlining of functions like strtod(). The
# -fno-builtin flag should address this problem
# but it does not work. The -fno-inline flag
# is kind of overkill but it works.
# Disable inlining only when one of the
# files in compat/*.c is being linked in.
if test x"${USE_COMPAT}" != x ; then
CFLAGS="$CFLAGS -fno-inline"
fi
;;
GNU*)
SHLIB_CFLAGS="-fPIC"
SHLIB_LD_LIBS='${LIBS}'
SHLIB_SUFFIX=".so"
SHLIB_LD="${CC} -shared"
DL_OBJS=""
DL_LIBS="-ldl"
LDFLAGS="$LDFLAGS -Wl,--export-dynamic"
CC_SEARCH_FLAGS=""
LD_SEARCH_FLAGS=""
if test "`uname -m`" = "alpha" ; then
CFLAGS="$CFLAGS -mieee"
fi
;;
Lynx*)
SHLIB_CFLAGS="-fPIC"
SHLIB_LD_LIBS='${LIBS}'
SHLIB_SUFFIX=".so"
CFLAGS_OPTIMIZE=-02
SHLIB_LD="${CC} -shared "
DL_OBJS="tclLoadDl.o"
DL_LIBS="-mshared -ldl"
LD_FLAGS="-Wl,--export-dynamic"
CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}'
LD_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}'
;;
MP-RAS-02*)
SHLIB_CFLAGS="-K PIC"
SHLIB_LD="cc -G"
SHLIB_LD_LIBS=""
SHLIB_SUFFIX=".so"
DL_OBJS="tclLoadDl.o"
DL_LIBS="-ldl"
CC_SEARCH_FLAGS=""
LD_SEARCH_FLAGS=""
;;
MP-RAS-*)
SHLIB_CFLAGS="-K PIC"
SHLIB_LD="cc -G"
SHLIB_LD_LIBS=""
SHLIB_SUFFIX=".so"
DL_OBJS="tclLoadDl.o"
DL_LIBS="-ldl"
LDFLAGS="$LDFLAGS -Wl,-Bexport"
CC_SEARCH_FLAGS=""
LD_SEARCH_FLAGS=""
;;
NetBSD-*|FreeBSD-[[1-2]].*)
# NetBSD/SPARC needs -fPIC, -fpic will not do.
SHLIB_CFLAGS="-fPIC"
SHLIB_LD="ld -Bshareable -x"
SHLIB_LD_LIBS='${LIBS}'
SHLIB_SUFFIX=".so"
DL_OBJS="tclLoadDl.o"
DL_LIBS=""
CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}'
LD_SEARCH_FLAGS='-rpath ${LIB_RUNTIME_DIR}'
AC_CACHE_CHECK([for ELF], tcl_cv_ld_elf, [
AC_EGREP_CPP(yes, [
#ifdef __ELF__
yes
#endif
], tcl_cv_ld_elf=yes, tcl_cv_ld_elf=no)])
if test $tcl_cv_ld_elf = yes; then
SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.so'
else
SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.so.1.0'
fi
# Ancient FreeBSD doesn't handle version numbers with dots.
UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.a'
TCL_LIB_VERSIONS_OK=nodots
;;
OpenBSD-*)
# OpenBSD/SPARC[64] needs -fPIC, -fpic will not do.
case `machine` in
sparc|sparc64)
SHLIB_CFLAGS="-fPIC";;
*)
SHLIB_CFLAGS="-fpic";;
esac
SHLIB_LD="${CC} -shared ${SHLIB_CFLAGS}"
SHLIB_LD_LIBS='${LIBS}'
SHLIB_SUFFIX=".so"
DL_OBJS="tclLoadDl.o"
DL_LIBS=""
CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}'
LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS}
SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.so.1.0'
AC_CACHE_CHECK([for ELF], tcl_cv_ld_elf, [
AC_EGREP_CPP(yes, [
#ifdef __ELF__
yes
#endif
], tcl_cv_ld_elf=yes, tcl_cv_ld_elf=no)])
if test $tcl_cv_ld_elf = yes; then
LDFLAGS=-Wl,-export-dynamic
else
LDFLAGS=""
fi
# OpenBSD doesn't do version numbers with dots.
UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.a'
TCL_LIB_VERSIONS_OK=nodots
;;
FreeBSD-*)
# FreeBSD 3.* and greater have ELF.
SHLIB_CFLAGS="-fPIC"
SHLIB_LD="ld -Bshareable -x"
SHLIB_LD_LIBS='${LIBS}'
SHLIB_SUFFIX=".so"
DL_OBJS="tclLoadDl.o"
DL_LIBS=""
LDFLAGS="$LDFLAGS -export-dynamic"
CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}'
LD_SEARCH_FLAGS='-rpath ${LIB_RUNTIME_DIR}'
if test "${TCL_THREADS}" = "1" ; then
# The -pthread needs to go in the CFLAGS, not LIBS
LIBS=`echo $LIBS | sed s/-pthread//`
CFLAGS="$CFLAGS -pthread"
LDFLAGS="$LDFLAGS -pthread"
fi
case $system in
FreeBSD-3.*)
# FreeBSD-3 doesn't handle version numbers with dots.
UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.a'
SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.so'
TCL_LIB_VERSIONS_OK=nodots
;;
esac
;;
Darwin-*)
CFLAGS_OPTIMIZE="-Os"
SHLIB_CFLAGS="-fno-common"
# To avoid discrepancies between what headers configure sees during
# preprocessing tests and compiling tests, move any -isysroot and
# -mmacosx-version-min flags from CFLAGS to CPPFLAGS:
CPPFLAGS="${CPPFLAGS} `echo " ${CFLAGS}" | \
awk 'BEGIN {FS=" +-";ORS=" "}; {for (i=2;i<=NF;i++) \
if ([$]i~/^(isysroot|mmacosx-version-min)/) print "-"[$]i}'`"
CFLAGS="`echo " ${CFLAGS}" | \
awk 'BEGIN {FS=" +-";ORS=" "}; {for (i=2;i<=NF;i++) \
if (!([$]i~/^(isysroot|mmacosx-version-min)/)) print "-"[$]i}'`"
if test $do64bit = yes; then
case `arch` in
ppc)
AC_CACHE_CHECK([if compiler accepts -arch ppc64 flag],
tcl_cv_cc_arch_ppc64, [
hold_cflags=$CFLAGS
CFLAGS="$CFLAGS -arch ppc64 -mpowerpc64 -mcpu=G5"
AC_TRY_LINK(,, tcl_cv_cc_arch_ppc64=yes,
tcl_cv_cc_arch_ppc64=no)
CFLAGS=$hold_cflags])
if test $tcl_cv_cc_arch_ppc64 = yes; then
CFLAGS="$CFLAGS -arch ppc64 -mpowerpc64 -mcpu=G5"
do64bit_ok=yes
fi;;
i386)
AC_CACHE_CHECK([if compiler accepts -arch x86_64 flag],
tcl_cv_cc_arch_x86_64, [
hold_cflags=$CFLAGS
CFLAGS="$CFLAGS -arch x86_64"
AC_TRY_LINK(,, tcl_cv_cc_arch_x86_64=yes,
tcl_cv_cc_arch_x86_64=no)
CFLAGS=$hold_cflags])
if test $tcl_cv_cc_arch_x86_64 = yes; then
CFLAGS="$CFLAGS -arch x86_64"
do64bit_ok=yes
fi;;
*)
AC_MSG_WARN([Don't know how enable 64-bit on architecture `arch`]);;
esac
else
# Check for combined 32-bit and 64-bit fat build
echo "$CFLAGS " | grep -E -q -- '-arch (ppc64|x86_64) ' && \
echo "$CFLAGS " | grep -E -q -- '-arch (ppc|i386) ' && \
fat_32_64=yes
fi
# TEA specific: use LDFLAGS_DEFAULT instead of LDFLAGS here:
SHLIB_LD='${CC} -dynamiclib ${CFLAGS} ${LDFLAGS_DEFAULT}'
AC_CACHE_CHECK([if ld accepts -single_module flag], tcl_cv_ld_single_module, [
hold_ldflags=$LDFLAGS
LDFLAGS="$LDFLAGS -dynamiclib -Wl,-single_module"
AC_TRY_LINK(, [int i;], tcl_cv_ld_single_module=yes, tcl_cv_ld_single_module=no)
LDFLAGS=$hold_ldflags])
if test $tcl_cv_ld_single_module = yes; then
SHLIB_LD="${SHLIB_LD} -Wl,-single_module"
fi
SHLIB_LD_LIBS='${LIBS}'
SHLIB_SUFFIX=".dylib"
DL_OBJS="tclLoadDyld.o"
DL_LIBS=""
# Don't use -prebind when building for Mac OS X 10.4 or later only:
test "`echo "${MACOSX_DEPLOYMENT_TARGET}" | awk -F '10\\.' '{print int([$]2)}'`" -lt 4 -a \
"`echo "${CPPFLAGS}" | awk -F '-mmacosx-version-min=10\\.' '{print int([$]2)}'`" -lt 4 && \
LDFLAGS="$LDFLAGS -prebind"
LDFLAGS="$LDFLAGS -headerpad_max_install_names"
AC_CACHE_CHECK([if ld accepts -search_paths_first flag], tcl_cv_ld_search_paths_first, [
hold_ldflags=$LDFLAGS
LDFLAGS="$LDFLAGS -Wl,-search_paths_first"
AC_TRY_LINK(, [int i;], tcl_cv_ld_search_paths_first=yes, tcl_cv_ld_search_paths_first=no)
LDFLAGS=$hold_ldflags])
if test $tcl_cv_ld_search_paths_first = yes; then
LDFLAGS="$LDFLAGS -Wl,-search_paths_first"
fi
CC_SEARCH_FLAGS=""
LD_SEARCH_FLAGS=""
LD_LIBRARY_PATH_VAR="DYLD_LIBRARY_PATH"
# TEA specific: for Tk extensions, remove 64-bit arch flags from
# CFLAGS et al. for combined 32 & 64 bit fat builds as neither
# TkAqua nor TkX11 can be built for 64-bit at present.
test "$fat_32_64" = yes && test -n "${TK_BIN_DIR}" && for v in CFLAGS CPPFLAGS LDFLAGS; do
eval $v'="`echo "$'$v' "|sed -e "s/-arch ppc64 / /g" -e "s/-arch x86_64 / /g"`"'; done
;;
NEXTSTEP-*)
SHLIB_CFLAGS=""
SHLIB_LD="cc -nostdlib -r"
SHLIB_LD_LIBS=""
SHLIB_SUFFIX=".so"
DL_OBJS="tclLoadNext.o"
DL_LIBS=""
CC_SEARCH_FLAGS=""
LD_SEARCH_FLAGS=""
;;
OS/390-*)
CFLAGS_OPTIMIZE="" # Optimizer is buggy
AC_DEFINE(_OE_SOCKETS, 1, # needed in sys/socket.h
[Should OS/390 do the right thing with sockets?])
;;
OSF1-1.0|OSF1-1.1|OSF1-1.2)
# OSF/1 1.[012] from OSF, and derivatives, including Paragon OSF/1
SHLIB_CFLAGS=""
# Hack: make package name same as library name
SHLIB_LD='ld -R -export $@:'
SHLIB_LD_LIBS=""
SHLIB_SUFFIX=".so"
DL_OBJS="tclLoadOSF.o"
DL_LIBS=""
CC_SEARCH_FLAGS=""
LD_SEARCH_FLAGS=""
;;
OSF1-1.*)
# OSF/1 1.3 from OSF using ELF, and derivatives, including AD2
SHLIB_CFLAGS="-fPIC"
if test "$SHARED_BUILD" = "1" ; then
SHLIB_LD="ld -shared"
else
SHLIB_LD="ld -non_shared"
fi
SHLIB_LD_LIBS=""
SHLIB_SUFFIX=".so"
DL_OBJS="tclLoadDl.o"
DL_LIBS=""
CC_SEARCH_FLAGS=""
LD_SEARCH_FLAGS=""
;;
OSF1-V*)
# Digital OSF/1
SHLIB_CFLAGS=""
if test "$SHARED_BUILD" = "1" ; then
SHLIB_LD='ld -shared -expect_unresolved "*"'
else
SHLIB_LD='ld -non_shared -expect_unresolved "*"'
fi
SHLIB_LD_LIBS=""
SHLIB_SUFFIX=".so"
DL_OBJS="tclLoadDl.o"
DL_LIBS=""
CC_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}'
LD_SEARCH_FLAGS='-rpath ${LIB_RUNTIME_DIR}'
if test "$GCC" = "yes" ; then
CFLAGS="$CFLAGS -mieee"
else
CFLAGS="$CFLAGS -DHAVE_TZSET -std1 -ieee"
fi
# see pthread_intro(3) for pthread support on osf1, k.furukawa
if test "${TCL_THREADS}" = "1" ; then
CFLAGS="$CFLAGS -DHAVE_PTHREAD_ATTR_SETSTACKSIZE"
CFLAGS="$CFLAGS -DTCL_THREAD_STACK_MIN=PTHREAD_STACK_MIN*64"
LIBS=`echo $LIBS | sed s/-lpthreads//`
if test "$GCC" = "yes" ; then
LIBS="$LIBS -lpthread -lmach -lexc"
else
CFLAGS="$CFLAGS -pthread"
LDFLAGS="$LDFLAGS -pthread"
fi
fi
;;
QNX-6*)
# QNX RTP
# This may work for all QNX, but it was only reported for v6.
SHLIB_CFLAGS="-fPIC"
SHLIB_LD="ld -Bshareable -x"
SHLIB_LD_LIBS=""
SHLIB_SUFFIX=".so"
DL_OBJS="tclLoadDl.o"
# dlopen is in -lc on QNX
DL_LIBS=""
CC_SEARCH_FLAGS=""
LD_SEARCH_FLAGS=""
;;
SCO_SV-3.2*)
# Note, dlopen is available only on SCO 3.2.5 and greater. However,
# this test works, since "uname -s" was non-standard in 3.2.4 and
# below.
if test "$GCC" = "yes" ; then
SHLIB_CFLAGS="-fPIC -melf"
LDFLAGS="$LDFLAGS -melf -Wl,-Bexport"
else
SHLIB_CFLAGS="-Kpic -belf"
LDFLAGS="$LDFLAGS -belf -Wl,-Bexport"
fi
SHLIB_LD="ld -G"
SHLIB_LD_LIBS=""
SHLIB_SUFFIX=".so"
DL_OBJS="tclLoadDl.o"
DL_LIBS=""
CC_SEARCH_FLAGS=""
LD_SEARCH_FLAGS=""
;;
SINIX*5.4*)
SHLIB_CFLAGS="-K PIC"
SHLIB_LD="cc -G"
SHLIB_LD_LIBS=""
SHLIB_SUFFIX=".so"
DL_OBJS="tclLoadDl.o"
DL_LIBS="-ldl"
CC_SEARCH_FLAGS=""
LD_SEARCH_FLAGS=""
;;
SunOS-4*)
SHLIB_CFLAGS="-PIC"
SHLIB_LD="ld"
SHLIB_LD_LIBS=""
SHLIB_SUFFIX=".so"
DL_OBJS="tclLoadDl.o"
DL_LIBS="-ldl"
CC_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}'
LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS}
# SunOS can't handle version numbers with dots in them in library
# specs, like -ltcl7.5, so use -ltcl75 instead. Also, it
# requires an extra version number at the end of .so file names.
# So, the library has to have a name like libtcl75.so.1.0
SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.so.1.0'
UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}.a'
TCL_LIB_VERSIONS_OK=nodots
;;
SunOS-5.[[0-6]])
# Careful to not let 5.10+ fall into this case
# Note: If _REENTRANT isn't defined, then Solaris
# won't define thread-safe library routines.
AC_DEFINE(_REENTRANT, 1, [Do we want the reentrant OS API?])
AC_DEFINE(_POSIX_PTHREAD_SEMANTICS, 1,
[Do we really want to follow the standard? Yes we do!])
SHLIB_CFLAGS="-KPIC"
# Note: need the LIBS below, otherwise Tk won't find Tcl's
# symbols when dynamically loaded into tclsh.
SHLIB_LD_LIBS='${LIBS}'
SHLIB_SUFFIX=".so"
DL_OBJS="tclLoadDl.o"
DL_LIBS="-ldl"
if test "$GCC" = "yes" ; then
SHLIB_LD="$CC -shared"
CC_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}'
LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS}
else
SHLIB_LD="/usr/ccs/bin/ld -G -z text"
CC_SEARCH_FLAGS='-R ${LIB_RUNTIME_DIR}'
LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS}
fi
;;
SunOS-5*)
# Note: If _REENTRANT isn't defined, then Solaris
# won't define thread-safe library routines.
AC_DEFINE(_REENTRANT, 1, [Do we want the reentrant OS API?])
AC_DEFINE(_POSIX_PTHREAD_SEMANTICS, 1,
[Do we really want to follow the standard? Yes we do!])
SHLIB_CFLAGS="-KPIC"
# Check to enable 64-bit flags for compiler/linker
if test "$do64bit" = "yes" ; then
arch=`isainfo`
if test "$arch" = "sparcv9 sparc" ; then
if test "$GCC" = "yes" ; then
if test "`gcc -dumpversion | awk -F. '{print [$]1}'`" -lt "3" ; then
AC_MSG_WARN([64bit mode not supported with GCC < 3.2 on $system])
else
do64bit_ok=yes
CFLAGS="$CFLAGS -m64 -mcpu=v9"
LDFLAGS="$LDFLAGS -m64 -mcpu=v9"
SHLIB_CFLAGS="-fPIC"
fi
else
do64bit_ok=yes
if test "$do64bitVIS" = "yes" ; then
CFLAGS="$CFLAGS -xarch=v9a"
LDFLAGS_ARCH="-xarch=v9a"
else
CFLAGS="$CFLAGS -xarch=v9"
LDFLAGS_ARCH="-xarch=v9"
fi
# Solaris 64 uses this as well
#LD_LIBRARY_PATH_VAR="LD_LIBRARY_PATH_64"
fi
elif test "$arch" = "amd64 i386" ; then
if test "$GCC" = "yes" ; then
AC_MSG_WARN([64bit mode not supported with GCC on $system])
else
do64bit_ok=yes
CFLAGS="$CFLAGS -xarch=amd64"
LDFLAGS="$LDFLAGS -xarch=amd64"
fi
else
AC_MSG_WARN([64bit mode not supported for $arch])
fi
fi
# Note: need the LIBS below, otherwise Tk won't find Tcl's
# symbols when dynamically loaded into tclsh.
SHLIB_LD_LIBS='${LIBS}'
SHLIB_SUFFIX=".so"
DL_OBJS="tclLoadDl.o"
DL_LIBS="-ldl"
if test "$GCC" = "yes" ; then
SHLIB_LD="$CC -shared"
CC_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}'
LD_SEARCH_FLAGS=${CC_SEARCH_FLAGS}
if test "$do64bit_ok" = "yes" ; then
# We need to specify -static-libgcc or we need to
# add the path to the sparv9 libgcc.
# JH: static-libgcc is necessary for core Tcl, but may
# not be necessary for extensions.
SHLIB_LD="$SHLIB_LD -m64 -mcpu=v9 -static-libgcc"
# for finding sparcv9 libgcc, get the regular libgcc
# path, remove so name and append 'sparcv9'
#v9gcclibdir="`gcc -print-file-name=libgcc_s.so` | ..."
#CC_SEARCH_FLAGS="${CC_SEARCH_FLAGS},-R,$v9gcclibdir"
fi
else
SHLIB_LD="/usr/ccs/bin/ld -G -z text"
CC_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}'
LD_SEARCH_FLAGS='-R ${LIB_RUNTIME_DIR}'
fi
;;
UNIX_SV* | UnixWare-5*)
SHLIB_CFLAGS="-KPIC"
SHLIB_LD="cc -G"
SHLIB_LD_LIBS=""
SHLIB_SUFFIX=".so"
DL_OBJS="tclLoadDl.o"
DL_LIBS="-ldl"
# Some UNIX_SV* systems (unixware 1.1.2 for example) have linkers
# that don't grok the -Bexport option. Test that it does.
AC_CACHE_CHECK([for ld accepts -Bexport flag], tcl_cv_ld_Bexport, [
hold_ldflags=$LDFLAGS
LDFLAGS="$LDFLAGS -Wl,-Bexport"
AC_TRY_LINK(, [int i;], tcl_cv_ld_Bexport=yes, tcl_cv_ld_Bexport=no)
LDFLAGS=$hold_ldflags])
if test $tcl_cv_ld_Bexport = yes; then
LDFLAGS="$LDFLAGS -Wl,-Bexport"
fi
CC_SEARCH_FLAGS=""
LD_SEARCH_FLAGS=""
;;
esac
if test "$do64bit" = "yes" -a "$do64bit_ok" = "no" ; then
AC_MSG_WARN([64bit support being disabled -- don't know magic for this platform])
fi
dnl # Add any CPPFLAGS set in the environment to our CFLAGS, but delay doing so
dnl # until the end of configure, as configure's compile and link tests use
dnl # both CPPFLAGS and CFLAGS (unlike our compile and link) but configure's
dnl # preprocessing tests use only CPPFLAGS.
AC_CONFIG_COMMANDS_PRE([CFLAGS="${CFLAGS} ${CPPFLAGS}"; CPPFLAGS=""])
# Step 4: disable dynamic loading if requested via a command-line switch.
AC_ARG_ENABLE(load,
AC_HELP_STRING([--enable-load],
[allow dynamic loading and "load" command (default: on)]),
[tcl_ok=$enableval], [tcl_ok=yes])
if test "$tcl_ok" = "no"; then
DL_OBJS=""
fi
if test "x$DL_OBJS" != "x" ; then
BUILD_DLTEST="\$(DLTEST_TARGETS)"
else
echo "Can't figure out how to do dynamic loading or shared libraries"
echo "on this system."
SHLIB_CFLAGS=""
SHLIB_LD=""
SHLIB_SUFFIX=""
DL_OBJS="tclLoadNone.o"
DL_LIBS=""
LDFLAGS="$LDFLAGS_ORIG"
CC_SEARCH_FLAGS=""
LD_SEARCH_FLAGS=""
BUILD_DLTEST=""
fi
LDFLAGS="$LDFLAGS $LDFLAGS_ARCH"
# If we're running gcc, then change the C flags for compiling shared
# libraries to the right flags for gcc, instead of those for the
# standard manufacturer compiler.
if test "$DL_OBJS" != "tclLoadNone.o" ; then
if test "$GCC" = "yes" ; then
case $system in
AIX-*)
;;
BSD/OS*)
;;
IRIX*)
;;
NetBSD-*|FreeBSD-*)
;;
Darwin-*)
;;
SCO_SV-3.2*)
;;
windows)
;;
*)
SHLIB_CFLAGS="-fPIC"
;;
esac
fi
fi
if test "$SHARED_LIB_SUFFIX" = "" ; then
SHARED_LIB_SUFFIX='${PACKAGE_VERSION}${SHLIB_SUFFIX}'
fi
if test "$UNSHARED_LIB_SUFFIX" = "" ; then
UNSHARED_LIB_SUFFIX='${PACKAGE_VERSION}.a'
fi
AC_SUBST(DL_LIBS)
AC_SUBST(CFLAGS_DEBUG)
AC_SUBST(CFLAGS_OPTIMIZE)
AC_SUBST(CFLAGS_WARNING)
AC_SUBST(STLIB_LD)
AC_SUBST(SHLIB_LD)
AC_SUBST(SHLIB_LD_LIBS)
AC_SUBST(SHLIB_CFLAGS)
AC_SUBST(LD_LIBRARY_PATH_VAR)
# These must be called after we do the basic CFLAGS checks and
# verify any possible 64-bit or similar switches are necessary
TEA_TCL_EARLY_FLAGS
TEA_TCL_64BIT_FLAGS
])
#--------------------------------------------------------------------
# TEA_SERIAL_PORT
#
# Determine which interface to use to talk to the serial port.
# Note that #include lines must begin in leftmost column for
# some compilers to recognize them as preprocessor directives,
# and some build environments have stdin not pointing at a
# pseudo-terminal (usually /dev/null instead.)
#
# Arguments:
# none
#
# Results:
#
# Defines only one of the following vars:
# HAVE_SYS_MODEM_H
# USE_TERMIOS
# USE_TERMIO
# USE_SGTTY
#
#--------------------------------------------------------------------
AC_DEFUN([TEA_SERIAL_PORT], [
AC_CHECK_HEADERS(sys/modem.h)
AC_CACHE_CHECK([termios vs. termio vs. sgtty], tcl_cv_api_serial, [
AC_TRY_RUN([
#include <termios.h>
int main() {
struct termios t;
if (tcgetattr(0, &t) == 0) {
cfsetospeed(&t, 0);
t.c_cflag |= PARENB | PARODD | CSIZE | CSTOPB;
return 0;
}
return 1;
}], tcl_cv_api_serial=termios, tcl_cv_api_serial=no, tcl_cv_api_serial=no)
if test $tcl_cv_api_serial = no ; then
AC_TRY_RUN([
#include <termio.h>
int main() {
struct termio t;
if (ioctl(0, TCGETA, &t) == 0) {
t.c_cflag |= CBAUD | PARENB | PARODD | CSIZE | CSTOPB;
return 0;
}
return 1;
}], tcl_cv_api_serial=termio, tcl_cv_api_serial=no, tcl_cv_api_serial=no)
fi
if test $tcl_cv_api_serial = no ; then
AC_TRY_RUN([
#include <sgtty.h>
int main() {
struct sgttyb t;
if (ioctl(0, TIOCGETP, &t) == 0) {
t.sg_ospeed = 0;
t.sg_flags |= ODDP | EVENP | RAW;
return 0;
}
return 1;
}], tcl_cv_api_serial=sgtty, tcl_cv_api_serial=no, tcl_cv_api_serial=no)
fi
if test $tcl_cv_api_serial = no ; then
AC_TRY_RUN([
#include <termios.h>
#include <errno.h>
int main() {
struct termios t;
if (tcgetattr(0, &t) == 0
|| errno == ENOTTY || errno == ENXIO || errno == EINVAL) {
cfsetospeed(&t, 0);
t.c_cflag |= PARENB | PARODD | CSIZE | CSTOPB;
return 0;
}
return 1;
}], tcl_cv_api_serial=termios, tcl_cv_api_serial=no, tcl_cv_api_serial=no)
fi
if test $tcl_cv_api_serial = no; then
AC_TRY_RUN([
#include <termio.h>
#include <errno.h>
int main() {
struct termio t;
if (ioctl(0, TCGETA, &t) == 0
|| errno == ENOTTY || errno == ENXIO || errno == EINVAL) {
t.c_cflag |= CBAUD | PARENB | PARODD | CSIZE | CSTOPB;
return 0;
}
return 1;
}], tcl_cv_api_serial=termio, tcl_cv_api_serial=no, tcl_cv_api_serial=no)
fi
if test $tcl_cv_api_serial = no; then
AC_TRY_RUN([
#include <sgtty.h>
#include <errno.h>
int main() {
struct sgttyb t;
if (ioctl(0, TIOCGETP, &t) == 0
|| errno == ENOTTY || errno == ENXIO || errno == EINVAL) {
t.sg_ospeed = 0;
t.sg_flags |= ODDP | EVENP | RAW;
return 0;
}
return 1;
}], tcl_cv_api_serial=sgtty, tcl_cv_api_serial=none, tcl_cv_api_serial=none)
fi])
case $tcl_cv_api_serial in
termios) AC_DEFINE(USE_TERMIOS, 1, [Use the termios API for serial lines]);;
termio) AC_DEFINE(USE_TERMIO, 1, [Use the termio API for serial lines]);;
sgtty) AC_DEFINE(USE_SGTTY, 1, [Use the sgtty API for serial lines]);;
esac
])
#--------------------------------------------------------------------
# TEA_MISSING_POSIX_HEADERS
#
# Supply substitutes for missing POSIX header files. Special
# notes:
# - stdlib.h doesn't define strtol, strtoul, or
# strtod insome versions of SunOS
# - some versions of string.h don't declare procedures such
# as strstr
#
# Arguments:
# none
#
# Results:
#
# Defines some of the following vars:
# NO_DIRENT_H
# NO_ERRNO_H
# NO_VALUES_H
# HAVE_LIMITS_H or NO_LIMITS_H
# NO_STDLIB_H
# NO_STRING_H
# NO_SYS_WAIT_H
# NO_DLFCN_H
# HAVE_SYS_PARAM_H
#
# HAVE_STRING_H ?
#
# tkUnixPort.h checks for HAVE_LIMITS_H, so do both HAVE and
# CHECK on limits.h
#--------------------------------------------------------------------
AC_DEFUN([TEA_MISSING_POSIX_HEADERS], [
AC_CACHE_CHECK([dirent.h], tcl_cv_dirent_h, [
AC_TRY_LINK([#include <sys/types.h>
#include <dirent.h>], [
#ifndef _POSIX_SOURCE
# ifdef __Lynx__
/*
* Generate compilation error to make the test fail: Lynx headers
* are only valid if really in the POSIX environment.
*/
missing_procedure();
# endif
#endif
DIR *d;
struct dirent *entryPtr;
char *p;
d = opendir("foobar");
entryPtr = readdir(d);
p = entryPtr->d_name;
closedir(d);
], tcl_cv_dirent_h=yes, tcl_cv_dirent_h=no)])
if test $tcl_cv_dirent_h = no; then
AC_DEFINE(NO_DIRENT_H, 1, [Do we have <dirent.h>?])
fi
AC_CHECK_HEADER(errno.h, , [AC_DEFINE(NO_ERRNO_H, 1, [Do we have <errno.h>?])])
AC_CHECK_HEADER(float.h, , [AC_DEFINE(NO_FLOAT_H, 1, [Do we have <float.h>?])])
AC_CHECK_HEADER(values.h, , [AC_DEFINE(NO_VALUES_H, 1, [Do we have <values.h>?])])
AC_CHECK_HEADER(limits.h,
[AC_DEFINE(HAVE_LIMITS_H, 1, [Do we have <limits.h>?])],
[AC_DEFINE(NO_LIMITS_H, 1, [Do we have <limits.h>?])])
AC_CHECK_HEADER(stdlib.h, tcl_ok=1, tcl_ok=0)
AC_EGREP_HEADER(strtol, stdlib.h, , tcl_ok=0)
AC_EGREP_HEADER(strtoul, stdlib.h, , tcl_ok=0)
AC_EGREP_HEADER(strtod, stdlib.h, , tcl_ok=0)
if test $tcl_ok = 0; then
AC_DEFINE(NO_STDLIB_H, 1, [Do we have <stdlib.h>?])
fi
AC_CHECK_HEADER(string.h, tcl_ok=1, tcl_ok=0)
AC_EGREP_HEADER(strstr, string.h, , tcl_ok=0)
AC_EGREP_HEADER(strerror, string.h, , tcl_ok=0)
# See also memmove check below for a place where NO_STRING_H can be
# set and why.
if test $tcl_ok = 0; then
AC_DEFINE(NO_STRING_H, 1, [Do we have <string.h>?])
fi
AC_CHECK_HEADER(sys/wait.h, , [AC_DEFINE(NO_SYS_WAIT_H, 1, [Do we have <sys/wait.h>?])])
AC_CHECK_HEADER(dlfcn.h, , [AC_DEFINE(NO_DLFCN_H, 1, [Do we have <dlfcn.h>?])])
# OS/390 lacks sys/param.h (and doesn't need it, by chance).
AC_HAVE_HEADERS(sys/param.h)
])
#--------------------------------------------------------------------
# TEA_PATH_X
#
# Locate the X11 header files and the X11 library archive. Try
# the ac_path_x macro first, but if it doesn't find the X stuff
# (e.g. because there's no xmkmf program) then check through
# a list of possible directories. Under some conditions the
# autoconf macro will return an include directory that contains
# no include files, so double-check its result just to be safe.
#
# This should be called after TEA_CONFIG_CFLAGS as setting the
# LIBS line can confuse some configure macro magic.
#
# Arguments:
# none
#
# Results:
#
# Sets the following vars:
# XINCLUDES
# XLIBSW
# PKG_LIBS (appends to)
#
#--------------------------------------------------------------------
AC_DEFUN([TEA_PATH_X], [
if test "${TEA_WINDOWINGSYSTEM}" = "x11" ; then
TEA_PATH_UNIX_X
fi
])
AC_DEFUN([TEA_PATH_UNIX_X], [
AC_PATH_X
not_really_there=""
if test "$no_x" = ""; then
if test "$x_includes" = ""; then
AC_TRY_CPP([#include <X11/XIntrinsic.h>], , not_really_there="yes")
else
if test ! -r $x_includes/X11/Intrinsic.h; then
not_really_there="yes"
fi
fi
fi
if test "$no_x" = "yes" -o "$not_really_there" = "yes"; then
AC_MSG_CHECKING([for X11 header files])
found_xincludes="no"
AC_TRY_CPP([#include <X11/Intrinsic.h>], found_xincludes="yes", found_xincludes="no")
if test "$found_xincludes" = "no"; then
dirs="/usr/unsupported/include /usr/local/include /usr/X386/include /usr/X11R6/include /usr/X11R5/include /usr/include/X11R5 /usr/include/X11R4 /usr/openwin/include /usr/X11/include /usr/sww/include"
for i in $dirs ; do
if test -r $i/X11/Intrinsic.h; then
AC_MSG_RESULT([$i])
XINCLUDES=" -I$i"
found_xincludes="yes"
break
fi
done
fi
else
if test "$x_includes" != ""; then
XINCLUDES="-I$x_includes"
found_xincludes="yes"
fi
fi
if test found_xincludes = "no"; then
AC_MSG_RESULT([couldn't find any!])
fi
if test "$no_x" = yes; then
AC_MSG_CHECKING([for X11 libraries])
XLIBSW=nope
dirs="/usr/unsupported/lib /usr/local/lib /usr/X386/lib /usr/X11R6/lib /usr/X11R5/lib /usr/lib/X11R5 /usr/lib/X11R4 /usr/openwin/lib /usr/X11/lib /usr/sww/X11/lib"
for i in $dirs ; do
if test -r $i/libX11.a -o -r $i/libX11.so -o -r $i/libX11.sl; then
AC_MSG_RESULT([$i])
XLIBSW="-L$i -lX11"
x_libraries="$i"
break
fi
done
else
if test "$x_libraries" = ""; then
XLIBSW=-lX11
else
XLIBSW="-L$x_libraries -lX11"
fi
fi
if test "$XLIBSW" = nope ; then
AC_CHECK_LIB(Xwindow, XCreateWindow, XLIBSW=-lXwindow)
fi
if test "$XLIBSW" = nope ; then
AC_MSG_RESULT([could not find any! Using -lX11.])
XLIBSW=-lX11
fi
if test x"${XLIBSW}" != x ; then
PKG_LIBS="${PKG_LIBS} ${XLIBSW}"
fi
])
#--------------------------------------------------------------------
# TEA_BLOCKING_STYLE
#
# The statements below check for systems where POSIX-style
# non-blocking I/O (O_NONBLOCK) doesn't work or is unimplemented.
# On these systems (mostly older ones), use the old BSD-style
# FIONBIO approach instead.
#
# Arguments:
# none
#
# Results:
#
# Defines some of the following vars:
# HAVE_SYS_IOCTL_H
# HAVE_SYS_FILIO_H
# USE_FIONBIO
# O_NONBLOCK
#
#--------------------------------------------------------------------
AC_DEFUN([TEA_BLOCKING_STYLE], [
AC_CHECK_HEADERS(sys/ioctl.h)
AC_CHECK_HEADERS(sys/filio.h)
TEA_CONFIG_SYSTEM
AC_MSG_CHECKING([FIONBIO vs. O_NONBLOCK for nonblocking I/O])
case $system in
# There used to be code here to use FIONBIO under AIX. However, it
# was reported that FIONBIO doesn't work under AIX 3.2.5. Since
# using O_NONBLOCK seems fine under AIX 4.*, I removed the FIONBIO
# code (JO, 5/31/97).
OSF*)
AC_DEFINE(USE_FIONBIO, 1, [Should we use FIONBIO?])
AC_MSG_RESULT([FIONBIO])
;;
SunOS-4*)
AC_DEFINE(USE_FIONBIO, 1, [Should we use FIONBIO?])
AC_MSG_RESULT([FIONBIO])
;;
*)
AC_MSG_RESULT([O_NONBLOCK])
;;
esac
])
#--------------------------------------------------------------------
# TEA_TIME_HANLDER
#
# Checks how the system deals with time.h, what time structures
# are used on the system, and what fields the structures have.
#
# Arguments:
# none
#
# Results:
#
# Defines some of the following vars:
# USE_DELTA_FOR_TZ
# HAVE_TM_GMTOFF
# HAVE_TM_TZADJ
# HAVE_TIMEZONE_VAR
#
#--------------------------------------------------------------------
AC_DEFUN([TEA_TIME_HANDLER], [
AC_CHECK_HEADERS(sys/time.h)
AC_HEADER_TIME
AC_STRUCT_TIMEZONE
AC_CHECK_FUNCS(gmtime_r localtime_r)
AC_CACHE_CHECK([tm_tzadj in struct tm], tcl_cv_member_tm_tzadj, [
AC_TRY_COMPILE([#include <time.h>], [struct tm tm; tm.tm_tzadj;],
tcl_cv_member_tm_tzadj=yes, tcl_cv_member_tm_tzadj=no)])
if test $tcl_cv_member_tm_tzadj = yes ; then
AC_DEFINE(HAVE_TM_TZADJ, 1, [Should we use the tm_tzadj field of struct tm?])
fi
AC_CACHE_CHECK([tm_gmtoff in struct tm], tcl_cv_member_tm_gmtoff, [
AC_TRY_COMPILE([#include <time.h>], [struct tm tm; tm.tm_gmtoff;],
tcl_cv_member_tm_gmtoff=yes, tcl_cv_member_tm_gmtoff=no)])
if test $tcl_cv_member_tm_gmtoff = yes ; then
AC_DEFINE(HAVE_TM_GMTOFF, 1, [Should we use the tm_gmtoff field of struct tm?])
fi
#
# Its important to include time.h in this check, as some systems
# (like convex) have timezone functions, etc.
#
AC_CACHE_CHECK([long timezone variable], tcl_cv_timezone_long, [
AC_TRY_COMPILE([#include <time.h>],
[extern long timezone;
timezone += 1;
exit (0);],
tcl_cv_timezone_long=yes, tcl_cv_timezone_long=no)])
if test $tcl_cv_timezone_long = yes ; then
AC_DEFINE(HAVE_TIMEZONE_VAR, 1, [Should we use the global timezone variable?])
else
#
# On some systems (eg IRIX 6.2), timezone is a time_t and not a long.
#
AC_CACHE_CHECK([time_t timezone variable], tcl_cv_timezone_time, [
AC_TRY_COMPILE([#include <time.h>],
[extern time_t timezone;
timezone += 1;
exit (0);],
tcl_cv_timezone_time=yes, tcl_cv_timezone_time=no)])
if test $tcl_cv_timezone_time = yes ; then
AC_DEFINE(HAVE_TIMEZONE_VAR, 1, [Should we use the global timezone variable?])
fi
fi
])
#--------------------------------------------------------------------
# TEA_BUGGY_STRTOD
#
# Under Solaris 2.4, strtod returns the wrong value for the
# terminating character under some conditions. Check for this
# and if the problem exists use a substitute procedure
# "fixstrtod" (provided by Tcl) that corrects the error.
# Also, on Compaq's Tru64 Unix 5.0,
# strtod(" ") returns 0.0 instead of a failure to convert.
#
# Arguments:
# none
#
# Results:
#
# Might defines some of the following vars:
# strtod (=fixstrtod)
#
#--------------------------------------------------------------------
AC_DEFUN([TEA_BUGGY_STRTOD], [
AC_CHECK_FUNC(strtod, tcl_strtod=1, tcl_strtod=0)
if test "$tcl_strtod" = 1; then
AC_CACHE_CHECK([for Solaris2.4/Tru64 strtod bugs], tcl_cv_strtod_buggy,[
AC_TRY_RUN([
extern double strtod();
int main() {
char *infString="Inf", *nanString="NaN", *spaceString=" ";
char *term;
double value;
value = strtod(infString, &term);
if ((term != infString) && (term[-1] == 0)) {
exit(1);
}
value = strtod(nanString, &term);
if ((term != nanString) && (term[-1] == 0)) {
exit(1);
}
value = strtod(spaceString, &term);
if (term == (spaceString+1)) {
exit(1);
}
exit(0);
}], tcl_cv_strtod_buggy=ok, tcl_cv_strtod_buggy=buggy,
tcl_cv_strtod_buggy=buggy)])
if test "$tcl_cv_strtod_buggy" = buggy; then
AC_LIBOBJ([fixstrtod])
USE_COMPAT=1
AC_DEFINE(strtod, fixstrtod, [Do we want to use the strtod() in compat?])
fi
fi
])
#--------------------------------------------------------------------
# TEA_TCL_LINK_LIBS
#
# Search for the libraries needed to link the Tcl shell.
# Things like the math library (-lm) and socket stuff (-lsocket vs.
# -lnsl) are dealt with here.
#
# Arguments:
# Requires the following vars to be set in the Makefile:
# DL_LIBS
# LIBS
# MATH_LIBS
#
# Results:
#
# Subst's the following var:
# TCL_LIBS
# MATH_LIBS
#
# Might append to the following vars:
# LIBS
#
# Might define the following vars:
# HAVE_NET_ERRNO_H
#
#--------------------------------------------------------------------
AC_DEFUN([TEA_TCL_LINK_LIBS], [
#--------------------------------------------------------------------
# On a few very rare systems, all of the libm.a stuff is
# already in libc.a. Set compiler flags accordingly.
# Also, Linux requires the "ieee" library for math to work
# right (and it must appear before "-lm").
#--------------------------------------------------------------------
AC_CHECK_FUNC(sin, MATH_LIBS="", MATH_LIBS="-lm")
AC_CHECK_LIB(ieee, main, [MATH_LIBS="-lieee $MATH_LIBS"])
#--------------------------------------------------------------------
# Interactive UNIX requires -linet instead of -lsocket, plus it
# needs net/errno.h to define the socket-related error codes.
#--------------------------------------------------------------------
AC_CHECK_LIB(inet, main, [LIBS="$LIBS -linet"])
AC_CHECK_HEADER(net/errno.h, [
AC_DEFINE(HAVE_NET_ERRNO_H, 1, [Do we have <net/errno.h>?])])
#--------------------------------------------------------------------
# Check for the existence of the -lsocket and -lnsl libraries.
# The order here is important, so that they end up in the right
# order in the command line generated by make. Here are some
# special considerations:
# 1. Use "connect" and "accept" to check for -lsocket, and
# "gethostbyname" to check for -lnsl.
# 2. Use each function name only once: can't redo a check because
# autoconf caches the results of the last check and won't redo it.
# 3. Use -lnsl and -lsocket only if they supply procedures that
# aren't already present in the normal libraries. This is because
# IRIX 5.2 has libraries, but they aren't needed and they're
# bogus: they goof up name resolution if used.
# 4. On some SVR4 systems, can't use -lsocket without -lnsl too.
# To get around this problem, check for both libraries together
# if -lsocket doesn't work by itself.
#--------------------------------------------------------------------
tcl_checkBoth=0
AC_CHECK_FUNC(connect, tcl_checkSocket=0, tcl_checkSocket=1)
if test "$tcl_checkSocket" = 1; then
AC_CHECK_FUNC(setsockopt, , [AC_CHECK_LIB(socket, setsockopt,
LIBS="$LIBS -lsocket", tcl_checkBoth=1)])
fi
if test "$tcl_checkBoth" = 1; then
tk_oldLibs=$LIBS
LIBS="$LIBS -lsocket -lnsl"
AC_CHECK_FUNC(accept, tcl_checkNsl=0, [LIBS=$tk_oldLibs])
fi
AC_CHECK_FUNC(gethostbyname, , [AC_CHECK_LIB(nsl, gethostbyname,
[LIBS="$LIBS -lnsl"])])
# Don't perform the eval of the libraries here because DL_LIBS
# won't be set until we call TEA_CONFIG_CFLAGS
TCL_LIBS='${DL_LIBS} ${LIBS} ${MATH_LIBS}'
AC_SUBST(TCL_LIBS)
AC_SUBST(MATH_LIBS)
])
#--------------------------------------------------------------------
# TEA_TCL_EARLY_FLAGS
#
# Check for what flags are needed to be passed so the correct OS
# features are available.
#
# Arguments:
# None
#
# Results:
#
# Might define the following vars:
# _ISOC99_SOURCE
# _LARGEFILE64_SOURCE
# _LARGEFILE_SOURCE64
#
#--------------------------------------------------------------------
AC_DEFUN([TEA_TCL_EARLY_FLAG],[
AC_CACHE_VAL([tcl_cv_flag_]translit($1,[A-Z],[a-z]),
AC_TRY_COMPILE([$2], $3, [tcl_cv_flag_]translit($1,[A-Z],[a-z])=no,
AC_TRY_COMPILE([[#define ]$1[ 1
]$2], $3,
[tcl_cv_flag_]translit($1,[A-Z],[a-z])=yes,
[tcl_cv_flag_]translit($1,[A-Z],[a-z])=no)))
if test ["x${tcl_cv_flag_]translit($1,[A-Z],[a-z])[}" = "xyes"] ; then
AC_DEFINE($1, 1, [Add the ]$1[ flag when building])
tcl_flags="$tcl_flags $1"
fi
])
AC_DEFUN([TEA_TCL_EARLY_FLAGS],[
AC_MSG_CHECKING([for required early compiler flags])
tcl_flags=""
TEA_TCL_EARLY_FLAG(_ISOC99_SOURCE,[#include <stdlib.h>],
[char *p = (char *)strtoll; char *q = (char *)strtoull;])
TEA_TCL_EARLY_FLAG(_LARGEFILE64_SOURCE,[#include <sys/stat.h>],
[struct stat64 buf; int i = stat64("/", &buf);])
TEA_TCL_EARLY_FLAG(_LARGEFILE_SOURCE64,[#include <sys/stat.h>],
[char *p = (char *)open64;])
if test "x${tcl_flags}" = "x" ; then
AC_MSG_RESULT([none])
else
AC_MSG_RESULT([${tcl_flags}])
fi
])
#--------------------------------------------------------------------
# TEA_TCL_64BIT_FLAGS
#
# Check for what is defined in the way of 64-bit features.
#
# Arguments:
# None
#
# Results:
#
# Might define the following vars:
# TCL_WIDE_INT_IS_LONG
# TCL_WIDE_INT_TYPE
# HAVE_STRUCT_DIRENT64
# HAVE_STRUCT_STAT64
# HAVE_TYPE_OFF64_T
#
#--------------------------------------------------------------------
AC_DEFUN([TEA_TCL_64BIT_FLAGS], [
AC_MSG_CHECKING([for 64-bit integer type])
AC_CACHE_VAL(tcl_cv_type_64bit,[
tcl_cv_type_64bit=none
# See if the compiler knows natively about __int64
AC_TRY_COMPILE(,[__int64 value = (__int64) 0;],
tcl_type_64bit=__int64, tcl_type_64bit="long long")
# See if we should use long anyway Note that we substitute in the
# type that is our current guess for a 64-bit type inside this check
# program, so it should be modified only carefully...
AC_TRY_COMPILE(,[switch (0) {
case 1: case (sizeof(]${tcl_type_64bit}[)==sizeof(long)): ;
}],tcl_cv_type_64bit=${tcl_type_64bit})])
if test "${tcl_cv_type_64bit}" = none ; then
AC_DEFINE(TCL_WIDE_INT_IS_LONG, 1, [Are wide integers to be implemented with C 'long's?])
AC_MSG_RESULT([using long])
elif test "${tcl_cv_type_64bit}" = "__int64" \
-a "${TEA_PLATFORM}" = "windows" ; then
# We actually want to use the default tcl.h checks in this
# case to handle both TCL_WIDE_INT_TYPE and TCL_LL_MODIFIER*
AC_MSG_RESULT([using Tcl header defaults])
else
AC_DEFINE_UNQUOTED(TCL_WIDE_INT_TYPE,${tcl_cv_type_64bit},
[What type should be used to define wide integers?])
AC_MSG_RESULT([${tcl_cv_type_64bit}])
# Now check for auxiliary declarations
AC_CACHE_CHECK([for struct dirent64], tcl_cv_struct_dirent64,[
AC_TRY_COMPILE([#include <sys/types.h>
#include <sys/dirent.h>],[struct dirent64 p;],
tcl_cv_struct_dirent64=yes,tcl_cv_struct_dirent64=no)])
if test "x${tcl_cv_struct_dirent64}" = "xyes" ; then
AC_DEFINE(HAVE_STRUCT_DIRENT64, 1, [Is 'struct dirent64' in <sys/types.h>?])
fi
AC_CACHE_CHECK([for struct stat64], tcl_cv_struct_stat64,[
AC_TRY_COMPILE([#include <sys/stat.h>],[struct stat64 p;
],
tcl_cv_struct_stat64=yes,tcl_cv_struct_stat64=no)])
if test "x${tcl_cv_struct_stat64}" = "xyes" ; then
AC_DEFINE(HAVE_STRUCT_STAT64, 1, [Is 'struct stat64' in <sys/stat.h>?])
fi
AC_CHECK_FUNCS(open64 lseek64)
AC_MSG_CHECKING([for off64_t])
AC_CACHE_VAL(tcl_cv_type_off64_t,[
AC_TRY_COMPILE([#include <sys/types.h>],[off64_t offset;
],
tcl_cv_type_off64_t=yes,tcl_cv_type_off64_t=no)])
dnl Define HAVE_TYPE_OFF64_T only when the off64_t type and the
dnl functions lseek64 and open64 are defined.
if test "x${tcl_cv_type_off64_t}" = "xyes" && \
test "x${ac_cv_func_lseek64}" = "xyes" && \
test "x${ac_cv_func_open64}" = "xyes" ; then
AC_DEFINE(HAVE_TYPE_OFF64_T, 1, [Is off64_t in <sys/types.h>?])
AC_MSG_RESULT([yes])
else
AC_MSG_RESULT([no])
fi
fi
])
##
## Here ends the standard Tcl configuration bits and starts the
## TEA specific functions
##
#------------------------------------------------------------------------
# TEA_INIT --
#
# Init various Tcl Extension Architecture (TEA) variables.
# This should be the first called TEA_* macro.
#
# Arguments:
# none
#
# Results:
#
# Defines and substs the following vars:
# CYGPATH
# EXEEXT
# Defines only:
# TEA_VERSION
# TEA_INITED
# TEA_PLATFORM (windows or unix)
#
# "cygpath" is used on windows to generate native path names for include
# files. These variables should only be used with the compiler and linker
# since they generate native path names.
#
# EXEEXT
# Select the executable extension based on the host type. This
# is a lightweight replacement for AC_EXEEXT that doesn't require
# a compiler.
#------------------------------------------------------------------------
AC_DEFUN([TEA_INIT], [
# TEA extensions pass this us the version of TEA they think they
# are compatible with.
TEA_VERSION="3.6"
AC_MSG_CHECKING([for correct TEA configuration])
if test x"${PACKAGE_NAME}" = x ; then
AC_MSG_ERROR([
The PACKAGE_NAME variable must be defined by your TEA configure.in])
fi
if test x"$1" = x ; then
AC_MSG_ERROR([
TEA version not specified.])
elif test "$1" != "${TEA_VERSION}" ; then
AC_MSG_RESULT([warning: requested TEA version "$1", have "${TEA_VERSION}"])
else
AC_MSG_RESULT([ok (TEA ${TEA_VERSION})])
fi
case "`uname -s`" in
*win32*|*WIN32*|*CYGWIN_NT*|*CYGWIN_9*|*CYGWIN_ME*|*MINGW32_*)
AC_CHECK_PROG(CYGPATH, cygpath, cygpath -w, echo)
EXEEXT=".exe"
TEA_PLATFORM="windows"
;;
*)
CYGPATH=echo
EXEEXT=""
TEA_PLATFORM="unix"
;;
esac
# Check if exec_prefix is set. If not use fall back to prefix.
# Note when adjusted, so that TEA_PREFIX can correct for this.
# This is needed for recursive configures, since autoconf propagates
# $prefix, but not $exec_prefix (doh!).
if test x$exec_prefix = xNONE ; then
exec_prefix_default=yes
exec_prefix=$prefix
fi
AC_SUBST(EXEEXT)
AC_SUBST(CYGPATH)
# This package name must be replaced statically for AC_SUBST to work
AC_SUBST(PKG_LIB_FILE)
# Substitute STUB_LIB_FILE in case package creates a stub library too.
AC_SUBST(PKG_STUB_LIB_FILE)
# We AC_SUBST these here to ensure they are subst'ed,
# in case the user doesn't call TEA_ADD_...
AC_SUBST(PKG_STUB_SOURCES)
AC_SUBST(PKG_STUB_OBJECTS)
AC_SUBST(PKG_TCL_SOURCES)
AC_SUBST(PKG_HEADERS)
AC_SUBST(PKG_INCLUDES)
AC_SUBST(PKG_LIBS)
AC_SUBST(PKG_CFLAGS)
])
#------------------------------------------------------------------------
# TEA_ADD_SOURCES --
#
# Specify one or more source files. Users should check for
# the right platform before adding to their list.
# It is not important to specify the directory, as long as it is
# in the generic, win or unix subdirectory of $(srcdir).
#
# Arguments:
# one or more file names
#
# Results:
#
# Defines and substs the following vars:
# PKG_SOURCES
# PKG_OBJECTS
#------------------------------------------------------------------------
AC_DEFUN([TEA_ADD_SOURCES], [
vars="$@"
for i in $vars; do
case $i in
[\$]*)
# allow $-var names
PKG_SOURCES="$PKG_SOURCES $i"
PKG_OBJECTS="$PKG_OBJECTS $i"
;;
*)
# check for existence - allows for generic/win/unix VPATH
if test ! -f "${srcdir}/$i" -a ! -f "${srcdir}/generic/$i" \
-a ! -f "${srcdir}/win/$i" -a ! -f "${srcdir}/unix/$i" \
; then
AC_MSG_ERROR([could not find source file '$i'])
fi
PKG_SOURCES="$PKG_SOURCES $i"
# this assumes it is in a VPATH dir
i=`basename $i`
# handle user calling this before or after TEA_SETUP_COMPILER
if test x"${OBJEXT}" != x ; then
j="`echo $i | sed -e 's/\.[[^.]]*$//'`.${OBJEXT}"
else
j="`echo $i | sed -e 's/\.[[^.]]*$//'`.\${OBJEXT}"
fi
PKG_OBJECTS="$PKG_OBJECTS $j"
;;
esac
done
AC_SUBST(PKG_SOURCES)
AC_SUBST(PKG_OBJECTS)
])
#------------------------------------------------------------------------
# TEA_ADD_STUB_SOURCES --
#
# Specify one or more source files. Users should check for
# the right platform before adding to their list.
# It is not important to specify the directory, as long as it is
# in the generic, win or unix subdirectory of $(srcdir).
#
# Arguments:
# one or more file names
#
# Results:
#
# Defines and substs the following vars:
# PKG_STUB_SOURCES
# PKG_STUB_OBJECTS
#------------------------------------------------------------------------
AC_DEFUN([TEA_ADD_STUB_SOURCES], [
vars="$@"
for i in $vars; do
# check for existence - allows for generic/win/unix VPATH
if test ! -f "${srcdir}/$i" -a ! -f "${srcdir}/generic/$i" \
-a ! -f "${srcdir}/win/$i" -a ! -f "${srcdir}/unix/$i" \
; then
AC_MSG_ERROR([could not find stub source file '$i'])
fi
PKG_STUB_SOURCES="$PKG_STUB_SOURCES $i"
# this assumes it is in a VPATH dir
i=`basename $i`
# handle user calling this before or after TEA_SETUP_COMPILER
if test x"${OBJEXT}" != x ; then
j="`echo $i | sed -e 's/\.[[^.]]*$//'`.${OBJEXT}"
else
j="`echo $i | sed -e 's/\.[[^.]]*$//'`.\${OBJEXT}"
fi
PKG_STUB_OBJECTS="$PKG_STUB_OBJECTS $j"
done
AC_SUBST(PKG_STUB_SOURCES)
AC_SUBST(PKG_STUB_OBJECTS)
])
#------------------------------------------------------------------------
# TEA_ADD_TCL_SOURCES --
#
# Specify one or more Tcl source files. These should be platform
# independent runtime files.
#
# Arguments:
# one or more file names
#
# Results:
#
# Defines and substs the following vars:
# PKG_TCL_SOURCES
#------------------------------------------------------------------------
AC_DEFUN([TEA_ADD_TCL_SOURCES], [
vars="$@"
for i in $vars; do
# check for existence, be strict because it is installed
if test ! -f "${srcdir}/$i" ; then
AC_MSG_ERROR([could not find tcl source file '${srcdir}/$i'])
fi
PKG_TCL_SOURCES="$PKG_TCL_SOURCES $i"
done
AC_SUBST(PKG_TCL_SOURCES)
])
#------------------------------------------------------------------------
# TEA_ADD_HEADERS --
#
# Specify one or more source headers. Users should check for
# the right platform before adding to their list.
#
# Arguments:
# one or more file names
#
# Results:
#
# Defines and substs the following vars:
# PKG_HEADERS
#------------------------------------------------------------------------
AC_DEFUN([TEA_ADD_HEADERS], [
vars="$@"
for i in $vars; do
# check for existence, be strict because it is installed
if test ! -f "${srcdir}/$i" ; then
AC_MSG_ERROR([could not find header file '${srcdir}/$i'])
fi
PKG_HEADERS="$PKG_HEADERS $i"
done
AC_SUBST(PKG_HEADERS)
])
#------------------------------------------------------------------------
# TEA_ADD_INCLUDES --
#
# Specify one or more include dirs. Users should check for
# the right platform before adding to their list.
#
# Arguments:
# one or more file names
#
# Results:
#
# Defines and substs the following vars:
# PKG_INCLUDES
#------------------------------------------------------------------------
AC_DEFUN([TEA_ADD_INCLUDES], [
vars="$@"
for i in $vars; do
PKG_INCLUDES="$PKG_INCLUDES $i"
done
AC_SUBST(PKG_INCLUDES)
])
#------------------------------------------------------------------------
# TEA_ADD_LIBS --
#
# Specify one or more libraries. Users should check for
# the right platform before adding to their list. For Windows,
# libraries provided in "foo.lib" format will be converted to
# "-lfoo" when using GCC (mingw).
#
# Arguments:
# one or more file names
#
# Results:
#
# Defines and substs the following vars:
# PKG_LIBS
#------------------------------------------------------------------------
AC_DEFUN([TEA_ADD_LIBS], [
vars="$@"
for i in $vars; do
if test "${TEA_PLATFORM}" = "windows" -a "$GCC" = "yes" ; then
# Convert foo.lib to -lfoo for GCC. No-op if not *.lib
i=`echo "$i" | sed -e 's/^\([[^-]].*\)\.lib[$]/-l\1/i'`
fi
PKG_LIBS="$PKG_LIBS $i"
done
AC_SUBST(PKG_LIBS)
])
#------------------------------------------------------------------------
# TEA_ADD_CFLAGS --
#
# Specify one or more CFLAGS. Users should check for
# the right platform before adding to their list.
#
# Arguments:
# one or more file names
#
# Results:
#
# Defines and substs the following vars:
# PKG_CFLAGS
#------------------------------------------------------------------------
AC_DEFUN([TEA_ADD_CFLAGS], [
PKG_CFLAGS="$PKG_CFLAGS $@"
AC_SUBST(PKG_CFLAGS)
])
#------------------------------------------------------------------------
# TEA_PREFIX --
#
# Handle the --prefix=... option by defaulting to what Tcl gave
#
# Arguments:
# none
#
# Results:
#
# If --prefix or --exec-prefix was not specified, $prefix and
# $exec_prefix will be set to the values given to Tcl when it was
# configured.
#------------------------------------------------------------------------
AC_DEFUN([TEA_PREFIX], [
if test "${prefix}" = "NONE"; then
prefix_default=yes
if test x"${TCL_PREFIX}" != x; then
AC_MSG_NOTICE([--prefix defaulting to TCL_PREFIX ${TCL_PREFIX}])
prefix=${TCL_PREFIX}
else
AC_MSG_NOTICE([--prefix defaulting to /usr/local])
prefix=/usr/local
fi
fi
if test "${exec_prefix}" = "NONE" -a x"${prefix_default}" = x"yes" \
-o x"${exec_prefix_default}" = x"yes" ; then
if test x"${TCL_EXEC_PREFIX}" != x; then
AC_MSG_NOTICE([--exec-prefix defaulting to TCL_EXEC_PREFIX ${TCL_EXEC_PREFIX}])
exec_prefix=${TCL_EXEC_PREFIX}
else
AC_MSG_NOTICE([--exec-prefix defaulting to ${prefix}])
exec_prefix=$prefix
fi
fi
])
#------------------------------------------------------------------------
# TEA_SETUP_COMPILER_CC --
#
# Do compiler checks the way we want. This is just a replacement
# for AC_PROG_CC in TEA configure.in files to make them cleaner.
#
# Arguments:
# none
#
# Results:
#
# Sets up CC var and other standard bits we need to make executables.
#------------------------------------------------------------------------
AC_DEFUN([TEA_SETUP_COMPILER_CC], [
# Don't put any macros that use the compiler (e.g. AC_TRY_COMPILE)
# in this macro, they need to go into TEA_SETUP_COMPILER instead.
# If the user did not set CFLAGS, set it now to keep
# the AC_PROG_CC macro from adding "-g -O2".
if test "${CFLAGS+set}" != "set" ; then
CFLAGS=""
fi
AC_PROG_CC
AC_PROG_CPP
AC_PROG_INSTALL
#--------------------------------------------------------------------
# Checks to see if the make program sets the $MAKE variable.
#--------------------------------------------------------------------
AC_PROG_MAKE_SET
#--------------------------------------------------------------------
# Find ranlib
#--------------------------------------------------------------------
AC_PROG_RANLIB
#--------------------------------------------------------------------
# Determines the correct binary file extension (.o, .obj, .exe etc.)
#--------------------------------------------------------------------
AC_OBJEXT
AC_EXEEXT
])
#------------------------------------------------------------------------
# TEA_SETUP_COMPILER --
#
# Do compiler checks that use the compiler. This must go after
# TEA_SETUP_COMPILER_CC, which does the actual compiler check.
#
# Arguments:
# none
#
# Results:
#
# Sets up CC var and other standard bits we need to make executables.
#------------------------------------------------------------------------
AC_DEFUN([TEA_SETUP_COMPILER], [
# Any macros that use the compiler (e.g. AC_TRY_COMPILE) have to go here.
AC_REQUIRE([TEA_SETUP_COMPILER_CC])
#------------------------------------------------------------------------
# If we're using GCC, see if the compiler understands -pipe. If so, use it.
# It makes compiling go faster. (This is only a performance feature.)
#------------------------------------------------------------------------
if test -z "$no_pipe" -a -n "$GCC"; then
AC_CACHE_CHECK([if the compiler understands -pipe],
tcl_cv_cc_pipe, [
hold_cflags=$CFLAGS; CFLAGS="$CFLAGS -pipe"
AC_TRY_COMPILE(,, tcl_cv_cc_pipe=yes, tcl_cv_cc_pipe=no)
CFLAGS=$hold_cflags])
if test $tcl_cv_cc_pipe = yes; then
CFLAGS="$CFLAGS -pipe"
fi
fi
#--------------------------------------------------------------------
# Common compiler flag setup
#--------------------------------------------------------------------
AC_C_BIGENDIAN
if test "${TEA_PLATFORM}" = "unix" ; then
TEA_TCL_LINK_LIBS
TEA_MISSING_POSIX_HEADERS
# Let the user call this, because if it triggers, they will
# need a compat/strtod.c that is correct. Users can also
# use Tcl_GetDouble(FromObj) instead.
#TEA_BUGGY_STRTOD
fi
])
#------------------------------------------------------------------------
# TEA_MAKE_LIB --
#
# Generate a line that can be used to build a shared/unshared library
# in a platform independent manner.
#
# Arguments:
# none
#
# Requires:
#
# Results:
#
# Defines the following vars:
# CFLAGS - Done late here to note disturb other AC macros
# MAKE_LIB - Command to execute to build the Tcl library;
# differs depending on whether or not Tcl is being
# compiled as a shared library.
# MAKE_SHARED_LIB Makefile rule for building a shared library
# MAKE_STATIC_LIB Makefile rule for building a static library
# MAKE_STUB_LIB Makefile rule for building a stub library
#------------------------------------------------------------------------
AC_DEFUN([TEA_MAKE_LIB], [
if test "${TEA_PLATFORM}" = "windows" -a "$GCC" != "yes"; then
MAKE_STATIC_LIB="\${STLIB_LD} -out:\[$]@ \$(PKG_OBJECTS)"
MAKE_SHARED_LIB="\${SHLIB_LD} \${SHLIB_LD_LIBS} \${LDFLAGS_DEFAULT} -out:\[$]@ \$(PKG_OBJECTS)"
MAKE_STUB_LIB="\${STLIB_LD} -out:\[$]@ \$(PKG_STUB_OBJECTS)"
else
MAKE_STATIC_LIB="\${STLIB_LD} \[$]@ \$(PKG_OBJECTS)"
MAKE_SHARED_LIB="\${SHLIB_LD} -o \[$]@ \$(PKG_OBJECTS) \${SHLIB_LD_LIBS}"
MAKE_STUB_LIB="\${STLIB_LD} \[$]@ \$(PKG_STUB_OBJECTS)"
fi
if test "${SHARED_BUILD}" = "1" ; then
MAKE_LIB="${MAKE_SHARED_LIB} "
else
MAKE_LIB="${MAKE_STATIC_LIB} "
fi
#--------------------------------------------------------------------
# Shared libraries and static libraries have different names.
# Use the double eval to make sure any variables in the suffix is
# substituted. (@@@ Might not be necessary anymore)
#--------------------------------------------------------------------
if test "${TEA_PLATFORM}" = "windows" ; then
if test "${SHARED_BUILD}" = "1" ; then
# We force the unresolved linking of symbols that are really in
# the private libraries of Tcl and Tk.
SHLIB_LD_LIBS="${SHLIB_LD_LIBS} \"`${CYGPATH} ${TCL_BIN_DIR}/${TCL_STUB_LIB_FILE}`\""
if test x"${TK_BIN_DIR}" != x ; then
SHLIB_LD_LIBS="${SHLIB_LD_LIBS} \"`${CYGPATH} ${TK_BIN_DIR}/${TK_STUB_LIB_FILE}`\""
fi
eval eval "PKG_LIB_FILE=${PACKAGE_NAME}${SHARED_LIB_SUFFIX}"
else
eval eval "PKG_LIB_FILE=${PACKAGE_NAME}${UNSHARED_LIB_SUFFIX}"
fi
# Some packages build their own stubs libraries
eval eval "PKG_STUB_LIB_FILE=${PACKAGE_NAME}stub${UNSHARED_LIB_SUFFIX}"
if test "$GCC" = "yes"; then
PKG_STUB_LIB_FILE=lib${PKG_STUB_LIB_FILE}
fi
# These aren't needed on Windows (either MSVC or gcc)
RANLIB=:
RANLIB_STUB=:
else
RANLIB_STUB="${RANLIB}"
if test "${SHARED_BUILD}" = "1" ; then
SHLIB_LD_LIBS="${SHLIB_LD_LIBS} ${TCL_STUB_LIB_SPEC}"
if test x"${TK_BIN_DIR}" != x ; then
SHLIB_LD_LIBS="${SHLIB_LD_LIBS} ${TK_STUB_LIB_SPEC}"
fi
eval eval "PKG_LIB_FILE=lib${PACKAGE_NAME}${SHARED_LIB_SUFFIX}"
RANLIB=:
else
eval eval "PKG_LIB_FILE=lib${PACKAGE_NAME}${UNSHARED_LIB_SUFFIX}"
fi
# Some packages build their own stubs libraries
eval eval "PKG_STUB_LIB_FILE=lib${PACKAGE_NAME}stub${UNSHARED_LIB_SUFFIX}"
fi
# These are escaped so that only CFLAGS is picked up at configure time.
# The other values will be substituted at make time.
CFLAGS="${CFLAGS} \${CFLAGS_DEFAULT} \${CFLAGS_WARNING}"
if test "${SHARED_BUILD}" = "1" ; then
CFLAGS="${CFLAGS} \${SHLIB_CFLAGS}"
fi
AC_SUBST(MAKE_LIB)
AC_SUBST(MAKE_SHARED_LIB)
AC_SUBST(MAKE_STATIC_LIB)
AC_SUBST(MAKE_STUB_LIB)
AC_SUBST(RANLIB_STUB)
])
#------------------------------------------------------------------------
# TEA_LIB_SPEC --
#
# Compute the name of an existing object library located in libdir
# from the given base name and produce the appropriate linker flags.
#
# Arguments:
# basename The base name of the library without version
# numbers, extensions, or "lib" prefixes.
# extra_dir Extra directory in which to search for the
# library. This location is used first, then
# $prefix/$exec-prefix, then some defaults.
#
# Requires:
# TEA_INIT and TEA_PREFIX must be called first.
#
# Results:
#
# Defines the following vars:
# ${basename}_LIB_NAME The computed library name.
# ${basename}_LIB_SPEC The computed linker flags.
#------------------------------------------------------------------------
AC_DEFUN([TEA_LIB_SPEC], [
AC_MSG_CHECKING([for $1 library])
# Look in exec-prefix for the library (defined by TEA_PREFIX).
tea_lib_name_dir="${exec_prefix}/lib"
# Or in a user-specified location.
if test x"$2" != x ; then
tea_extra_lib_dir=$2
else
tea_extra_lib_dir=NONE
fi
for i in \
`ls -dr ${tea_extra_lib_dir}/$1[[0-9]]*.lib 2>/dev/null ` \
`ls -dr ${tea_extra_lib_dir}/lib$1[[0-9]]* 2>/dev/null ` \
`ls -dr ${tea_lib_name_dir}/$1[[0-9]]*.lib 2>/dev/null ` \
`ls -dr ${tea_lib_name_dir}/lib$1[[0-9]]* 2>/dev/null ` \
`ls -dr /usr/lib/$1[[0-9]]*.lib 2>/dev/null ` \
`ls -dr /usr/lib/lib$1[[0-9]]* 2>/dev/null ` \
`ls -dr /usr/local/lib/$1[[0-9]]*.lib 2>/dev/null ` \
`ls -dr /usr/local/lib/lib$1[[0-9]]* 2>/dev/null ` ; do
if test -f "$i" ; then
tea_lib_name_dir=`dirname $i`
$1_LIB_NAME=`basename $i`
$1_LIB_PATH_NAME=$i
break
fi
done
if test "${TEA_PLATFORM}" = "windows"; then
$1_LIB_SPEC=\"`${CYGPATH} ${$1_LIB_PATH_NAME} 2>/dev/null`\"
else
# Strip off the leading "lib" and trailing ".a" or ".so"
tea_lib_name_lib=`echo ${$1_LIB_NAME}|sed -e 's/^lib//' -e 's/\.[[^.]]*$//' -e 's/\.so.*//'`
$1_LIB_SPEC="-L${tea_lib_name_dir} -l${tea_lib_name_lib}"
fi
if test "x${$1_LIB_NAME}" = x ; then
AC_MSG_ERROR([not found])
else
AC_MSG_RESULT([${$1_LIB_SPEC}])
fi
])
#------------------------------------------------------------------------
# TEA_PRIVATE_TCL_HEADERS --
#
# Locate the private Tcl include files
#
# Arguments:
#
# Requires:
# TCL_SRC_DIR Assumes that TEA_LOAD_TCLCONFIG has
# already been called.
#
# Results:
#
# Substs the following vars:
# TCL_TOP_DIR_NATIVE
# TCL_GENERIC_DIR_NATIVE
# TCL_UNIX_DIR_NATIVE
# TCL_WIN_DIR_NATIVE
# TCL_BMAP_DIR_NATIVE
# TCL_TOOL_DIR_NATIVE
# TCL_PLATFORM_DIR_NATIVE
# TCL_BIN_DIR_NATIVE
# TCL_INCLUDES
#------------------------------------------------------------------------
AC_DEFUN([TEA_PRIVATE_TCL_HEADERS], [
AC_MSG_CHECKING([for Tcl private include files])
TCL_SRC_DIR_NATIVE=`${CYGPATH} ${TCL_SRC_DIR}`
TCL_TOP_DIR_NATIVE=\"${TCL_SRC_DIR_NATIVE}\"
TCL_GENERIC_DIR_NATIVE=\"${TCL_SRC_DIR_NATIVE}/generic\"
TCL_UNIX_DIR_NATIVE=\"${TCL_SRC_DIR_NATIVE}/unix\"
TCL_WIN_DIR_NATIVE=\"${TCL_SRC_DIR_NATIVE}/win\"
TCL_BMAP_DIR_NATIVE=\"${TCL_SRC_DIR_NATIVE}/bitmaps\"
TCL_TOOL_DIR_NATIVE=\"${TCL_SRC_DIR_NATIVE}/tools\"
TCL_COMPAT_DIR_NATIVE=\"${TCL_SRC_DIR_NATIVE}/compat\"
if test "${TEA_PLATFORM}" = "windows"; then
TCL_PLATFORM_DIR_NATIVE=${TCL_WIN_DIR_NATIVE}
else
TCL_PLATFORM_DIR_NATIVE=${TCL_UNIX_DIR_NATIVE}
fi
# We want to ensure these are substituted so as not to require
# any *_NATIVE vars be defined in the Makefile
TCL_INCLUDES="-I${TCL_GENERIC_DIR_NATIVE} -I${TCL_PLATFORM_DIR_NATIVE}"
if test "`uname -s`" = "Darwin"; then
# If Tcl was built as a framework, attempt to use
# the framework's Headers and PrivateHeaders directories
case ${TCL_DEFS} in
*TCL_FRAMEWORK*)
if test -d "${TCL_BIN_DIR}/Headers" -a -d "${TCL_BIN_DIR}/PrivateHeaders"; then
TCL_INCLUDES="-I\"${TCL_BIN_DIR}/Headers\" -I\"${TCL_BIN_DIR}/PrivateHeaders\" ${TCL_INCLUDES}"; else
TCL_INCLUDES="${TCL_INCLUDES} ${TCL_INCLUDE_SPEC} `echo "${TCL_INCLUDE_SPEC}" | sed -e 's/Headers/PrivateHeaders/'`"; fi
;;
esac
else
if test ! -f "${TCL_SRC_DIR}/generic/tclInt.h" ; then
AC_MSG_ERROR([Cannot find private header tclInt.h in ${TCL_SRC_DIR}])
fi
fi
AC_SUBST(TCL_TOP_DIR_NATIVE)
AC_SUBST(TCL_GENERIC_DIR_NATIVE)
AC_SUBST(TCL_UNIX_DIR_NATIVE)
AC_SUBST(TCL_WIN_DIR_NATIVE)
AC_SUBST(TCL_BMAP_DIR_NATIVE)
AC_SUBST(TCL_TOOL_DIR_NATIVE)
AC_SUBST(TCL_PLATFORM_DIR_NATIVE)
AC_SUBST(TCL_INCLUDES)
AC_MSG_RESULT([Using srcdir found in tclConfig.sh: ${TCL_SRC_DIR}])
])
#------------------------------------------------------------------------
# TEA_PUBLIC_TCL_HEADERS --
#
# Locate the installed public Tcl header files
#
# Arguments:
# None.
#
# Requires:
# CYGPATH must be set
#
# Results:
#
# Adds a --with-tclinclude switch to configure.
# Result is cached.
#
# Substs the following vars:
# TCL_INCLUDES
#------------------------------------------------------------------------
AC_DEFUN([TEA_PUBLIC_TCL_HEADERS], [
AC_MSG_CHECKING([for Tcl public headers])
AC_ARG_WITH(tclinclude, [ --with-tclinclude directory containing the public Tcl header files], with_tclinclude=${withval})
AC_CACHE_VAL(ac_cv_c_tclh, [
# Use the value from --with-tclinclude, if it was given
if test x"${with_tclinclude}" != x ; then
if test -f "${with_tclinclude}/tcl.h" ; then
ac_cv_c_tclh=${with_tclinclude}
else
AC_MSG_ERROR([${with_tclinclude} directory does not contain tcl.h])
fi
else
if test "`uname -s`" = "Darwin"; then
# If Tcl was built as a framework, attempt to use
# the framework's Headers directory
case ${TCL_DEFS} in
*TCL_FRAMEWORK*)
list="`ls -d ${TCL_BIN_DIR}/Headers 2>/dev/null`"
;;
esac
fi
# Look in the source dir only if Tcl is not installed,
# and in that situation, look there before installed locations.
if test -f "${TCL_BIN_DIR}/Makefile" ; then
list="$list `ls -d ${TCL_SRC_DIR}/generic 2>/dev/null`"
fi
# Check order: pkg --prefix location, Tcl's --prefix location,
# relative to directory of tclConfig.sh.
eval "temp_includedir=${includedir}"
list="$list \
`ls -d ${temp_includedir} 2>/dev/null` \
`ls -d ${TCL_PREFIX}/include 2>/dev/null` \
`ls -d ${TCL_BIN_DIR}/../include 2>/dev/null`"
if test "${TEA_PLATFORM}" != "windows" -o "$GCC" = "yes"; then
list="$list /usr/local/include /usr/include"
if test x"${TCL_INCLUDE_SPEC}" != x ; then
d=`echo "${TCL_INCLUDE_SPEC}" | sed -e 's/^-I//'`
list="$list `ls -d ${d} 2>/dev/null`"
fi
fi
for i in $list ; do
if test -f "$i/tcl.h" ; then
ac_cv_c_tclh=$i
break
fi
done
fi
])
# Print a message based on how we determined the include path
if test x"${ac_cv_c_tclh}" = x ; then
AC_MSG_ERROR([tcl.h not found. Please specify its location with --with-tclinclude])
else
AC_MSG_RESULT([${ac_cv_c_tclh}])
fi
# Convert to a native path and substitute into the output files.
INCLUDE_DIR_NATIVE=`${CYGPATH} ${ac_cv_c_tclh}`
TCL_INCLUDES=-I\"${INCLUDE_DIR_NATIVE}\"
AC_SUBST(TCL_INCLUDES)
])
#------------------------------------------------------------------------
# TEA_PRIVATE_TK_HEADERS --
#
# Locate the private Tk include files
#
# Arguments:
#
# Requires:
# TK_SRC_DIR Assumes that TEA_LOAD_TKCONFIG has
# already been called.
#
# Results:
#
# Substs the following vars:
# TK_INCLUDES
#------------------------------------------------------------------------
AC_DEFUN([TEA_PRIVATE_TK_HEADERS], [
AC_MSG_CHECKING([for Tk private include files])
TK_SRC_DIR_NATIVE=`${CYGPATH} ${TK_SRC_DIR}`
TK_TOP_DIR_NATIVE=\"${TK_SRC_DIR_NATIVE}\"
TK_UNIX_DIR_NATIVE=\"${TK_SRC_DIR_NATIVE}/unix\"
TK_WIN_DIR_NATIVE=\"${TK_SRC_DIR_NATIVE}/win\"
TK_GENERIC_DIR_NATIVE=\"${TK_SRC_DIR_NATIVE}/generic\"
TK_XLIB_DIR_NATIVE=\"${TK_SRC_DIR_NATIVE}/xlib\"
if test "${TEA_PLATFORM}" = "windows"; then
TK_PLATFORM_DIR_NATIVE=${TK_WIN_DIR_NATIVE}
else
TK_PLATFORM_DIR_NATIVE=${TK_UNIX_DIR_NATIVE}
fi
# We want to ensure these are substituted so as not to require
# any *_NATIVE vars be defined in the Makefile
TK_INCLUDES="-I${TK_GENERIC_DIR_NATIVE} -I${TK_PLATFORM_DIR_NATIVE}"
if test "${TEA_WINDOWINGSYSTEM}" = "win32" \
-o "${TEA_WINDOWINGSYSTEM}" = "aqua"; then
TK_INCLUDES="${TK_INCLUDES} -I${TK_XLIB_DIR_NATIVE}"
fi
if test "${TEA_WINDOWINGSYSTEM}" = "aqua"; then
TK_INCLUDES="${TK_INCLUDES} -I${TK_SRC_DIR_NATIVE}/macosx"
fi
if test "`uname -s`" = "Darwin"; then
# If Tk was built as a framework, attempt to use
# the framework's Headers and PrivateHeaders directories
case ${TK_DEFS} in
*TK_FRAMEWORK*)
if test -d "${TK_BIN_DIR}/Headers" -a -d "${TK_BIN_DIR}/PrivateHeaders"; then
TK_INCLUDES="-I\"${TK_BIN_DIR}/Headers\" -I\"${TK_BIN_DIR}/PrivateHeaders\" ${TK_INCLUDES}"; fi
;;
esac
else
if test ! -f "${TK_SRC_DIR}/generic/tkInt.h" ; then
AC_MSG_ERROR([Cannot find private header tkInt.h in ${TK_SRC_DIR}])
fi
fi
AC_SUBST(TK_TOP_DIR_NATIVE)
AC_SUBST(TK_UNIX_DIR_NATIVE)
AC_SUBST(TK_WIN_DIR_NATIVE)
AC_SUBST(TK_GENERIC_DIR_NATIVE)
AC_SUBST(TK_XLIB_DIR_NATIVE)
AC_SUBST(TK_PLATFORM_DIR_NATIVE)
AC_SUBST(TK_INCLUDES)
AC_MSG_RESULT([Using srcdir found in tkConfig.sh: ${TK_SRC_DIR}])
])
#------------------------------------------------------------------------
# TEA_PUBLIC_TK_HEADERS --
#
# Locate the installed public Tk header files
#
# Arguments:
# None.
#
# Requires:
# CYGPATH must be set
#
# Results:
#
# Adds a --with-tkinclude switch to configure.
# Result is cached.
#
# Substs the following vars:
# TK_INCLUDES
#------------------------------------------------------------------------
AC_DEFUN([TEA_PUBLIC_TK_HEADERS], [
AC_MSG_CHECKING([for Tk public headers])
AC_ARG_WITH(tkinclude, [ --with-tkinclude directory containing the public Tk header files], with_tkinclude=${withval})
AC_CACHE_VAL(ac_cv_c_tkh, [
# Use the value from --with-tkinclude, if it was given
if test x"${with_tkinclude}" != x ; then
if test -f "${with_tkinclude}/tk.h" ; then
ac_cv_c_tkh=${with_tkinclude}
else
AC_MSG_ERROR([${with_tkinclude} directory does not contain tk.h])
fi
else
if test "`uname -s`" = "Darwin"; then
# If Tk was built as a framework, attempt to use
# the framework's Headers directory.
case ${TK_DEFS} in
*TK_FRAMEWORK*)
list="`ls -d ${TK_BIN_DIR}/Headers 2>/dev/null`"
;;
esac
fi
# Look in the source dir only if Tk is not installed,
# and in that situation, look there before installed locations.
if test -f "${TK_BIN_DIR}/Makefile" ; then
list="$list `ls -d ${TK_SRC_DIR}/generic 2>/dev/null`"
fi
# Check order: pkg --prefix location, Tk's --prefix location,
# relative to directory of tkConfig.sh, Tcl's --prefix location,
# relative to directory of tclConfig.sh.
eval "temp_includedir=${includedir}"
list="$list \
`ls -d ${temp_includedir} 2>/dev/null` \
`ls -d ${TK_PREFIX}/include 2>/dev/null` \
`ls -d ${TK_BIN_DIR}/../include 2>/dev/null` \
`ls -d ${TCL_PREFIX}/include 2>/dev/null` \
`ls -d ${TCL_BIN_DIR}/../include 2>/dev/null`"
if test "${TEA_PLATFORM}" != "windows" -o "$GCC" = "yes"; then
list="$list /usr/local/include /usr/include"
fi
for i in $list ; do
if test -f "$i/tk.h" ; then
ac_cv_c_tkh=$i
break
fi
done
fi
])
# Print a message based on how we determined the include path
if test x"${ac_cv_c_tkh}" = x ; then
AC_MSG_ERROR([tk.h not found. Please specify its location with --with-tkinclude])
else
AC_MSG_RESULT([${ac_cv_c_tkh}])
fi
# Convert to a native path and substitute into the output files.
INCLUDE_DIR_NATIVE=`${CYGPATH} ${ac_cv_c_tkh}`
TK_INCLUDES=-I\"${INCLUDE_DIR_NATIVE}\"
AC_SUBST(TK_INCLUDES)
if test "${TEA_WINDOWINGSYSTEM}" = "win32" \
-o "${TEA_WINDOWINGSYSTEM}" = "aqua"; then
# On Windows and Aqua, we need the X compat headers
AC_MSG_CHECKING([for X11 header files])
if test ! -r "${INCLUDE_DIR_NATIVE}/X11/Xlib.h"; then
INCLUDE_DIR_NATIVE="`${CYGPATH} ${TK_SRC_DIR}/xlib`"
TK_XINCLUDES=-I\"${INCLUDE_DIR_NATIVE}\"
AC_SUBST(TK_XINCLUDES)
fi
AC_MSG_RESULT([${INCLUDE_DIR_NATIVE}])
fi
])
#------------------------------------------------------------------------
# TEA_PROG_TCLSH
# Determine the fully qualified path name of the tclsh executable
# in the Tcl build directory or the tclsh installed in a bin
# directory. This macro will correctly determine the name
# of the tclsh executable even if tclsh has not yet been
# built in the build directory. The tclsh found is always
# associated with a tclConfig.sh file. This tclsh should be used
# only for running extension test cases. It should never be
# or generation of files (like pkgIndex.tcl) at build time.
#
# Arguments
# none
#
# Results
# Subst's the following values:
# TCLSH_PROG
#------------------------------------------------------------------------
AC_DEFUN([TEA_PROG_TCLSH], [
AC_MSG_CHECKING([for tclsh])
if test -f "${TCL_BIN_DIR}/Makefile" ; then
# tclConfig.sh is in Tcl build directory
if test "${TEA_PLATFORM}" = "windows"; then
TCLSH_PROG="${TCL_BIN_DIR}/tclsh${TCL_MAJOR_VERSION}${TCL_MINOR_VERSION}${TCL_DBGX}${EXEEXT}"
else
TCLSH_PROG="${TCL_BIN_DIR}/tclsh"
fi
else
# tclConfig.sh is in install location
if test "${TEA_PLATFORM}" = "windows"; then
TCLSH_PROG="tclsh${TCL_MAJOR_VERSION}${TCL_MINOR_VERSION}${TCL_DBGX}${EXEEXT}"
else
TCLSH_PROG="tclsh${TCL_MAJOR_VERSION}.${TCL_MINOR_VERSION}${TCL_DBGX}"
fi
list="`ls -d ${TCL_BIN_DIR}/../bin 2>/dev/null` \
`ls -d ${TCL_BIN_DIR}/.. 2>/dev/null` \
`ls -d ${TCL_PREFIX}/bin 2>/dev/null`"
for i in $list ; do
if test -f "$i/${TCLSH_PROG}" ; then
REAL_TCL_BIN_DIR="`cd "$i"; pwd`"
break
fi
done
TCLSH_PROG="${REAL_TCL_BIN_DIR}/${TCLSH_PROG}"
fi
AC_MSG_RESULT([${TCLSH_PROG}])
AC_SUBST(TCLSH_PROG)
])
#------------------------------------------------------------------------
# TEA_PROG_WISH
# Determine the fully qualified path name of the wish executable
# in the Tk build directory or the wish installed in a bin
# directory. This macro will correctly determine the name
# of the wish executable even if wish has not yet been
# built in the build directory. The wish found is always
# associated with a tkConfig.sh file. This wish should be used
# only for running extension test cases. It should never be
# or generation of files (like pkgIndex.tcl) at build time.
#
# Arguments
# none
#
# Results
# Subst's the following values:
# WISH_PROG
#------------------------------------------------------------------------
AC_DEFUN([TEA_PROG_WISH], [
AC_MSG_CHECKING([for wish])
if test -f "${TK_BIN_DIR}/Makefile" ; then
# tkConfig.sh is in Tk build directory
if test "${TEA_PLATFORM}" = "windows"; then
WISH_PROG="${TK_BIN_DIR}/wish${TK_MAJOR_VERSION}${TK_MINOR_VERSION}${TK_DBGX}${EXEEXT}"
else
WISH_PROG="${TK_BIN_DIR}/wish"
fi
else
# tkConfig.sh is in install location
if test "${TEA_PLATFORM}" = "windows"; then
WISH_PROG="wish${TK_MAJOR_VERSION}${TK_MINOR_VERSION}${TK_DBGX}${EXEEXT}"
else
WISH_PROG="wish${TK_MAJOR_VERSION}.${TK_MINOR_VERSION}${TK_DBGX}"
fi
list="`ls -d ${TK_BIN_DIR}/../bin 2>/dev/null` \
`ls -d ${TK_BIN_DIR}/.. 2>/dev/null` \
`ls -d ${TK_PREFIX}/bin 2>/dev/null`"
for i in $list ; do
if test -f "$i/${WISH_PROG}" ; then
REAL_TK_BIN_DIR="`cd "$i"; pwd`"
break
fi
done
WISH_PROG="${REAL_TK_BIN_DIR}/${WISH_PROG}"
fi
AC_MSG_RESULT([${WISH_PROG}])
AC_SUBST(WISH_PROG)
])
#------------------------------------------------------------------------
# TEA_PATH_CONFIG --
#
# Locate the ${1}Config.sh file and perform a sanity check on
# the ${1} compile flags. These are used by packages like
# [incr Tk] that load *Config.sh files from more than Tcl and Tk.
#
# Arguments:
# none
#
# Results:
#
# Adds the following arguments to configure:
# --with-$1=...
#
# Defines the following vars:
# $1_BIN_DIR Full path to the directory containing
# the $1Config.sh file
#------------------------------------------------------------------------
AC_DEFUN([TEA_PATH_CONFIG], [
#
# Ok, lets find the $1 configuration
# First, look for one uninstalled.
# the alternative search directory is invoked by --with-$1
#
if test x"${no_$1}" = x ; then
# we reset no_$1 in case something fails here
no_$1=true
AC_ARG_WITH($1, [ --with-$1 directory containing $1 configuration ($1Config.sh)], with_$1config=${withval})
AC_MSG_CHECKING([for $1 configuration])
AC_CACHE_VAL(ac_cv_c_$1config,[
# First check to see if --with-$1 was specified.
if test x"${with_$1config}" != x ; then
case ${with_$1config} in
*/$1Config.sh )
if test -f ${with_$1config}; then
AC_MSG_WARN([--with-$1 argument should refer to directory containing $1Config.sh, not to $1Config.sh itself])
with_$1config=`echo ${with_$1config} | sed 's!/$1Config\.sh$!!'`
fi;;
esac
if test -f "${with_$1config}/$1Config.sh" ; then
ac_cv_c_$1config=`(cd ${with_$1config}; pwd)`
else
AC_MSG_ERROR([${with_$1config} directory doesn't contain $1Config.sh])
fi
fi
# then check for a private $1 installation
if test x"${ac_cv_c_$1config}" = x ; then
for i in \
../$1 \
`ls -dr ../$1*[[0-9]].[[0-9]]*.[[0-9]]* 2>/dev/null` \
`ls -dr ../$1*[[0-9]].[[0-9]][[0-9]] 2>/dev/null` \
`ls -dr ../$1*[[0-9]].[[0-9]] 2>/dev/null` \
`ls -dr ../$1*[[0-9]].[[0-9]]* 2>/dev/null` \
../../$1 \
`ls -dr ../../$1*[[0-9]].[[0-9]]*.[[0-9]]* 2>/dev/null` \
`ls -dr ../../$1*[[0-9]].[[0-9]][[0-9]] 2>/dev/null` \
`ls -dr ../../$1*[[0-9]].[[0-9]] 2>/dev/null` \
`ls -dr ../../$1*[[0-9]].[[0-9]]* 2>/dev/null` \
../../../$1 \
`ls -dr ../../../$1*[[0-9]].[[0-9]]*.[[0-9]]* 2>/dev/null` \
`ls -dr ../../../$1*[[0-9]].[[0-9]][[0-9]] 2>/dev/null` \
`ls -dr ../../../$1*[[0-9]].[[0-9]] 2>/dev/null` \
`ls -dr ../../../$1*[[0-9]].[[0-9]]* 2>/dev/null` \
${srcdir}/../$1 \
`ls -dr ${srcdir}/../$1*[[0-9]].[[0-9]]*.[[0-9]]* 2>/dev/null` \
`ls -dr ${srcdir}/../$1*[[0-9]].[[0-9]][[0-9]] 2>/dev/null` \
`ls -dr ${srcdir}/../$1*[[0-9]].[[0-9]] 2>/dev/null` \
`ls -dr ${srcdir}/../$1*[[0-9]].[[0-9]]* 2>/dev/null` \
; do
if test -f "$i/$1Config.sh" ; then
ac_cv_c_$1config=`(cd $i; pwd)`
break
fi
if test -f "$i/unix/$1Config.sh" ; then
ac_cv_c_$1config=`(cd $i/unix; pwd)`
break
fi
done
fi
# check in a few common install locations
if test x"${ac_cv_c_$1config}" = x ; then
for i in `ls -d ${libdir} 2>/dev/null` \
`ls -d ${exec_prefix}/lib 2>/dev/null` \
`ls -d ${prefix}/lib 2>/dev/null` \
`ls -d /usr/local/lib 2>/dev/null` \
`ls -d /usr/contrib/lib 2>/dev/null` \
`ls -d /usr/lib 2>/dev/null` \
; do
if test -f "$i/$1Config.sh" ; then
ac_cv_c_$1config=`(cd $i; pwd)`
break
fi
done
fi
])
if test x"${ac_cv_c_$1config}" = x ; then
$1_BIN_DIR="# no $1 configs found"
AC_MSG_WARN([Cannot find $1 configuration definitions])
exit 0
else
no_$1=
$1_BIN_DIR=${ac_cv_c_$1config}
AC_MSG_RESULT([found $$1_BIN_DIR/$1Config.sh])
fi
fi
])
#------------------------------------------------------------------------
# TEA_LOAD_CONFIG --
#
# Load the $1Config.sh file
#
# Arguments:
#
# Requires the following vars to be set:
# $1_BIN_DIR
#
# Results:
#
# Subst the following vars:
# $1_SRC_DIR
# $1_LIB_FILE
# $1_LIB_SPEC
#
#------------------------------------------------------------------------
AC_DEFUN([TEA_LOAD_CONFIG], [
AC_MSG_CHECKING([for existence of ${$1_BIN_DIR}/$1Config.sh])
if test -f "${$1_BIN_DIR}/$1Config.sh" ; then
AC_MSG_RESULT([loading])
. "${$1_BIN_DIR}/$1Config.sh"
else
AC_MSG_RESULT([file not found])
fi
#
# If the $1_BIN_DIR is the build directory (not the install directory),
# then set the common variable name to the value of the build variables.
# For example, the variable $1_LIB_SPEC will be set to the value
# of $1_BUILD_LIB_SPEC. An extension should make use of $1_LIB_SPEC
# instead of $1_BUILD_LIB_SPEC since it will work with both an
# installed and uninstalled version of Tcl.
#
if test -f "${$1_BIN_DIR}/Makefile" ; then
AC_MSG_WARN([Found Makefile - using build library specs for $1])
$1_LIB_SPEC=${$1_BUILD_LIB_SPEC}
$1_STUB_LIB_SPEC=${$1_BUILD_STUB_LIB_SPEC}
$1_STUB_LIB_PATH=${$1_BUILD_STUB_LIB_PATH}
fi
AC_SUBST($1_VERSION)
AC_SUBST($1_BIN_DIR)
AC_SUBST($1_SRC_DIR)
AC_SUBST($1_LIB_FILE)
AC_SUBST($1_LIB_SPEC)
AC_SUBST($1_STUB_LIB_FILE)
AC_SUBST($1_STUB_LIB_SPEC)
AC_SUBST($1_STUB_LIB_PATH)
])
#------------------------------------------------------------------------
# TEA_PATH_CELIB --
#
# Locate Keuchel's celib emulation layer for targeting Win/CE
#
# Arguments:
# none
#
# Results:
#
# Adds the following arguments to configure:
# --with-celib=...
#
# Defines the following vars:
# CELIB_DIR Full path to the directory containing
# the include and platform lib files
#------------------------------------------------------------------------
AC_DEFUN([TEA_PATH_CELIB], [
# First, look for one uninstalled.
# the alternative search directory is invoked by --with-celib
if test x"${no_celib}" = x ; then
# we reset no_celib in case something fails here
no_celib=true
AC_ARG_WITH(celib,[ --with-celib=DIR use Windows/CE support library from DIR], with_celibconfig=${withval})
AC_MSG_CHECKING([for Windows/CE celib directory])
AC_CACHE_VAL(ac_cv_c_celibconfig,[
# First check to see if --with-celibconfig was specified.
if test x"${with_celibconfig}" != x ; then
if test -d "${with_celibconfig}/inc" ; then
ac_cv_c_celibconfig=`(cd ${with_celibconfig}; pwd)`
else
AC_MSG_ERROR([${with_celibconfig} directory doesn't contain inc directory])
fi
fi
# then check for a celib library
if test x"${ac_cv_c_celibconfig}" = x ; then
for i in \
../celib-palm-3.0 \
../celib \
../../celib-palm-3.0 \
../../celib \
`ls -dr ../celib-*3.[[0-9]]* 2>/dev/null` \
${srcdir}/../celib-palm-3.0 \
${srcdir}/../celib \
`ls -dr ${srcdir}/../celib-*3.[[0-9]]* 2>/dev/null` \
; do
if test -d "$i/inc" ; then
ac_cv_c_celibconfig=`(cd $i; pwd)`
break
fi
done
fi
])
if test x"${ac_cv_c_celibconfig}" = x ; then
AC_MSG_ERROR([Cannot find celib support library directory])
else
no_celib=
CELIB_DIR=${ac_cv_c_celibconfig}
CELIB_DIR=`echo "$CELIB_DIR" | sed -e 's!\\\!/!g'`
AC_MSG_RESULT([found $CELIB_DIR])
fi
fi
])
# Local Variables:
# mode: autoconf
# End: