# Commands tested in this file: socket.
#
# This file contains a collection of tests for one or more of the Tcl
# built-in commands. Sourcing this file into Tcl runs the tests and
# generates output for errors. No output means no errors were found.
#
# Copyright (c) 1994-1996 Sun Microsystems, Inc.
# Copyright (c) 1998-2000 Ajuba Solutions.
#
# See the file "license.terms" for information on usage and redistribution
# of this file, and for a DISCLAIMER OF ALL WARRANTIES.
#
# RCS: @(#) $Id: tlsIO.test,v 1.3 2000/06/05 20:39:31 aborr Exp $
# Running socket tests with a remote server:
# ------------------------------------------
#
# Some tests in socket.test depend on the existence of a remote server to
# which they connect. The remote server must be an instance of tcltest and it
# must run the script found in the file "remote.tcl" in this directory. You
# can start the remote server on any machine reachable from the machine on
# which you want to run the socket tests, by issuing:
#
# tcltest remote.tcl -port 2048 # Or choose another port number.
#
# If the machine you are running the remote server on has several IP
# interfaces, you can choose which interface the server listens on for
# connections by specifying the -address command line flag, so:
#
# tcltest remote.tcl -address your.machine.com
#
# These options can also be set by environment variables. On Unix, you can
# type these commands to the shell from which the remote server is started:
#
# shell% setenv serverPort 2048
# shell% setenv serverAddress your.machine.com
#
# and subsequently you can start the remote server with:
#
# tcltest remote.tcl
#
# to have it listen on port 2048 on the interface your.machine.com.
#
# When the server starts, it prints out a detailed message containing its
# configuration information, and it will block until killed with a Ctrl-C.
# Once the remote server exists, you can run the tests in socket.test with
# the server by setting two Tcl variables:
#
# % set remoteServerIP <name or address of machine on which server runs>
# % set remoteServerPort 2048
#
# These variables are also settable from the environment. On Unix, you can:
#
# shell% setenv remoteServerIP machine.where.server.runs
# shell% senetv remoteServerPort 2048
#
# The preamble of the socket.test file checks to see if the variables are set
# either in Tcl or in the environment; if they are, it attempts to connect to
# the server. If the connection is successful, the tests using the remote
# server will be performed; otherwise, it will attempt to start the remote
# server (via exec) on platforms that support this, on the local host,
# listening at port 2048. If all fails, a message is printed and the tests
# using the remote server are not performed.
if {[lsearch [namespace children] ::tcltest] == -1} {
package require tcltest
namespace import -force ::tcltest::*
}
# Load the tls package
package require tls
set serverCert [file join $::tcltest::testsDirectory certs server.pem]
set clientCert [file join $::tcltest::testsDirectory certs client.pem]
set caCert [file join $::tcltest::testsDirectory certs cacert.pem]
set serverKey [file join $::tcltest::testsDirectory certs skey.pem]
set clientKey [file join $::tcltest::testsDirectory certs ckey.pem]
# Some tests require the testthread command
set ::tcltest::testConstraints(testthread) \
[expr {[info commands testthread] != {}}]
#
# If remoteServerIP or remoteServerPort are not set, check in the
# environment variables for externally set values.
#
if {![info exists remoteServerIP]} {
if {[info exists env(remoteServerIP)]} {
set remoteServerIP $env(remoteServerIP)
}
}
if {![info exists remoteServerPort]} {
if {[info exists env(remoteServerIP)]} {
set remoteServerPort $env(remoteServerPort)
} else {
if {[info exists remoteServerIP]} {
set remoteServerPort 2048
}
}
}
#
# Check if we're supposed to do tests against the remote server
#
set doTestsWithRemoteServer 1
if {![info exists remoteServerIP] && ($tcl_platform(platform) != "macintosh")} {
set remoteServerIP 127.0.0.1
}
if {($doTestsWithRemoteServer == 1) && (![info exists remoteServerPort])} {
set remoteServerPort 2048
}
# Attempt to connect to a remote server if one is already running. If it
# is not running or for some other reason the connect fails, attempt to
# start the remote server on the local host listening on port 2048. This
# is only done on platforms that support exec (i.e. not on the Mac). On
# platforms that do not support exec, the remote server must be started
# by the user before running the tests.
set remoteProcChan ""
set commandSocket ""
if {$doTestsWithRemoteServer} {
catch {close $commandSocket}
if {[catch {set commandSocket [tls::socket \
-certfile $clientCert -cafile $caCert -keyfile $clientKey \
$remoteServerIP \
$remoteServerPort]}] != 0} {
if {[info commands exec] == ""} {
set noRemoteTestReason "can't exec"
set doTestsWithRemoteServer 0
} else {
set remoteServerIP 127.0.0.1
set remoteFile [file join [pwd] remote.tcl]
if {[catch {set remoteProcChan \
[open "|[list $::tcltest::tcltest $remoteFile \
-serverIsSilent \
-port $remoteServerPort \
-address $remoteServerIP]" \
w+]} \
msg] == 0} {
after 1000
if {[catch {set commandSocket [tls::socket \
-certfile $clientCert -cafile $caCert -keyfile $clientKey \
$remoteServerIP \
$remoteServerPort]} msg] == 0} {
fconfigure $commandSocket -translation crlf -buffering line
} else {
set noRemoteTestReason $msg
set doTestsWithRemoteServer 0
}
} else {
set noRemoteTestReason "$msg $::tcltest::tcltest"
set doTestsWithRemoteServer 0
}
}
} else {
fconfigure $commandSocket -translation crlf -buffering line
}
}
# Some tests are run only if we are doing testing against a remote server.
set ::tcltest::testConstraints(doTestsWithRemoteServer) $doTestsWithRemoteServer
if {$doTestsWithRemoteServer == 0} {
if {[string first s $::tcltest::verbose] != -1} {
puts "Skipping tests with remote server. See tests/socket.test for"
puts "information on how to run remote server."
puts "Reason for not doing remote tests: $noRemoteTestReason"
}
}
#
# If we do the tests, define a command to send a command to the
# remote server.
#
if {$doTestsWithRemoteServer == 1} {
proc sendCommand {c} {
global commandSocket
if {[eof $commandSocket]} {
error "remote server disappeared"
}
if {[catch {puts $commandSocket $c} msg]} {
error "remote server disappaered: $msg"
}
if {[catch {puts $commandSocket "--Marker--Marker--Marker--"} msg]} {
error "remote server disappeared: $msg"
}
set resp ""
while {1} {
set line [gets $commandSocket]
if {[eof $commandSocket]} {
error "remote server disappeared"
}
if {[string compare $line "--Marker--Marker--Marker--"] == 0} {
if {[string compare [lindex $resp 0] error] == 0} {
error [lindex $resp 1]
} else {
return [lindex $resp 1]
}
} else {
append resp $line "\n"
}
}
}
}
test tlsIO-1.1 {arg parsing for socket command} {socket} {
list [catch {tls::socket -server} msg] $msg
} {1 {wrong # args: should be "tls::socket -server command ?options? port"}}
test tlsIO-1.2 {arg parsing for socket command} {socket} {
list [catch {tls::socket -server foo} msg] $msg
} {1 {wrong # args: should be "tls::socket -server command ?options? port"}}
test tlsIO-1.3 {arg parsing for socket command} {socket} {
list [catch {tls::socket -myaddr} msg] $msg
} {1 {wrong # args: should be "tls::socket ?options? host port"}}
test tlsIO-1.4 {arg parsing for socket command} {socket} {
list [catch {tls::socket -myaddr 127.0.0.1} msg] $msg
} {1 {wrong # args: should be "tls::socket ?options? host port"}}
test tlsIO-1.5 {arg parsing for socket command} {socket} {
list [catch {tls::socket -myport} msg] $msg
} {1 {wrong # args: should be "tls::socket ?options? host port"}}
test tlsIO-1.6 {arg parsing for socket command} {socket} {
list [catch {tls::socket -myport xxxx} msg] $msg
} {1 {wrong # args: should be "tls::socket ?options? host port"}}
test tlsIO-1.7 {arg parsing for socket command} {socket} {
list [catch {tls::socket -myport 2522} msg] $msg
} {1 {wrong # args: should be "tls::socket ?options? host port"}}
test tlsIO-1.8 {arg parsing for socket command} {socket} {
list [catch {tls::socket -froboz} msg] $msg
} {1 {wrong # args: should be "tls::socket ?options? host port"}}
test tlsIO-1.9 {arg parsing for socket command} {socket} {
list [catch {tls::socket -server foo -myport 2521 3333} msg] $msg
} {1 {wrong # args: should be "tls::socket -server command ?options? port"}}
test tlsIO-1.10 {arg parsing for socket command} {socket} {
list [catch {tls::socket host 2528 -junk} msg] $msg
} {1 {wrong # args: should be "tls::socket ?options? host port"}}
test tlsIO-1.11 {arg parsing for socket command} {socket} {
list [catch {tls::socket -server callback 2520 --} msg] $msg
} {1 {wrong # args: should be "tls::socket -server command ?options? port"}}
test tlsIO-1.12 {arg parsing for socket command} {socket} {
list [catch {tls::socket foo badport} msg] $msg
} {1 {expected integer but got "badport"}}
test tlsIO-2.1 {tcp connection} {socket stdio} {
removeFile script
set f [open script w]
puts $f {
package require tls
set timer [after 2000 "set x timed_out"]
}
puts $f "set f \[tls::socket -server accept -certfile $serverCert -cafile $caCert -keyfile $serverKey 2828 \]"
puts $f {
proc accept {file addr port} {
global x
set x done
close $file
}
puts ready
vwait x
after cancel $timer
close $f
puts $x
}
close $f
set f [open "|[list $::tcltest::tcltest script]" r]
gets $f x
if {[catch {tls::socket -certfile $clientCert -cafile $caCert \
-keyfile $clientKey 127.0.0.1 2828} msg]} {
set x $msg
} else {
lappend x [gets $f]
close $msg
}
lappend x [gets $f]
close $f
set x
} {ready done {}}
if [info exists port] {
incr port
} else {
set port [expr 2048 + [pid]%1024]
}
test tlsIO-2.2 {tcp connection with client port specified} {socket stdio} {
removeFile script
set f [open script w]
puts $f {
package require tls
set timer [after 2000 "set x done"]
}
puts $f "set f \[tls::socket -server accept -certfile $serverCert -cafile $caCert -keyfile $serverKey 2829 \]"
puts $f {
proc accept {file addr port} {
global x
puts "[gets $file] $port"
close $file
set x done
}
puts ready
vwait x
after cancel $timer
close $f
}
close $f
set f [open "|[list $::tcltest::tcltest script]" r]
gets $f x
global port
if {[catch {tls::socket -myport $port \
-certfile $clientCert -cafile $caCert \
-keyfile $clientKey 127.0.0.1 2829} sock]} {
set x $sock
catch {close [tls::socket 127.0.0.1 2829]}
} else {
puts $sock hello
flush $sock
lappend x [gets $f]
close $sock
}
close $f
set x
} [list ready "hello $port"]
test tlsIO-2.3 {tcp connection with client interface specified} {socket stdio} {
removeFile script
set f [open script w]
puts $f {
package require tls
set timer [after 2000 "set x done"]
}
puts $f "set f \[tls::socket -server accept -certfile $serverCert -cafile $caCert -keyfile $serverKey 2830 \]"
puts $f {
proc accept {file addr port} {
global x
puts "[gets $file] $addr"
close $file
set x done
}
puts ready
vwait x
after cancel $timer
close $f
}
close $f
set f [open "|[list $::tcltest::tcltest script]" r]
gets $f x
if {[catch {tls::socket -myaddr 127.0.0.1 \
-certfile $clientCert -cafile $caCert \
-keyfile $clientKey 127.0.0.1 2830} sock]} {
set x $sock
} else {
puts $sock hello
catch {flush $sock}
lappend x [gets $f]
close $sock
}
close $f
set x
} {ready {hello 127.0.0.1}}
test tlsIO-2.4 {tcp connection with server interface specified} {socket stdio} {
removeFile script
set f [open script w]
puts $f {
package require tls
set timer [after 2000 "set x done"]
}
puts $f "set f \[tls::socket -server accept -certfile $serverCert -cafile $caCert -keyfile $serverKey -myaddr [info hostname] 2831 \]"
puts $f {
proc accept {file addr port} {
global x
puts "[gets $file]"
close $file
set x done
}
puts ready
vwait x
after cancel $timer
close $f
}
close $f
set f [open "|[list $::tcltest::tcltest script]" r]
gets $f x
if {[catch {tls::socket -certfile $clientCert -cafile $caCert \
-keyfile $clientKey [info hostname] 2831} sock]} {
set x $sock
} else {
puts $sock hello
flush $sock
lappend x [gets $f]
close $sock
}
close $f
set x
} {ready hello}
test tlsIO-2.5 {tcp connection with redundant server port} {socket stdio} {
removeFile script
set f [open script w]
puts $f {
package require tls
set timer [after 2000 "set x done"]
}
puts $f "set f \[tls::socket -server accept -certfile $serverCert -cafile $caCert -keyfile $serverKey 2832 \]"
puts $f {
proc accept {file addr port} {
global x
puts "[gets $file]"
close $file
set x done
}
puts ready
vwait x
after cancel $timer
close $f
}
close $f
set f [open "|[list $::tcltest::tcltest script]" r]
gets $f x
if {[catch {tls::socket -certfile $clientCert -cafile $caCert \
-keyfile $clientKey 127.0.0.1 2832} sock]} {
set x $sock
} else {
puts $sock hello
flush $sock
lappend x [gets $f]
close $sock
}
close $f
set x
} {ready hello}
test tlsIO-2.6 {tcp connection} {socket} {
set status ok
if {![catch {set sock [tls::socket 127.0.0.1 2833]}]} {
if {![catch {gets $sock}]} {
set status broken
}
close $sock
}
set status
} ok
test tlsIO-2.7 {echo server, one line} {socket stdio} {
removeFile script
set f [open script w]
puts $f {
package require tls
set timer [after 2000 "set x done"]
}
puts $f "set f \[tls::socket -server accept -certfile $serverCert -cafile $caCert -keyfile $serverKey 2834 \]"
puts $f {
proc accept {s a p} {
fileevent $s readable [list echo $s]
fconfigure $s -translation lf -buffering line
}
proc echo {s} {
set l [gets $s]
if {[eof $s]} {
global x
close $s
set x done
} else {
puts $s $l
}
}
puts ready
vwait x
after cancel $timer
close $f
puts done
}
close $f
set f [open "|[list $::tcltest::tcltest script]" r]
gets $f
set s [tls::socket -certfile $clientCert -cafile $caCert \
-keyfile $clientKey 127.0.0.1 2834]
fconfigure $s -buffering line -translation lf
puts $s "hello abcdefghijklmnop"
after 1000
set x [gets $s]
close $s
set y [gets $f]
close $f
list $x $y
} {{hello abcdefghijklmnop} done}
test tlsIO-2.8 {echo server, loop 50 times, single connection} {socket stdio} {
set f [open script w]
puts $f {
package require tls
}
puts $f "set f \[tls::socket -server accept -certfile $serverCert -cafile $caCert -keyfile $serverKey 2835 \]"
puts $f {
proc accept {s a p} {
fileevent $s readable [list echo $s]
fconfigure $s -buffering line
}
proc echo {s} {
global i
set l [gets $s]
if {[eof $s]} {
global x
close $s
set x done
} else {
incr i
puts $s $l
}
}
set i 0
puts ready
set timer [after 20000 "set x done"]
vwait x
after cancel $timer
close $f
puts "done $i"
}
close $f
set f [open "|[list $::tcltest::tcltest script]" r]
gets $f
set s [tls::socket -certfile $clientCert -cafile $caCert \
-keyfile $clientKey 127.0.0.1 2835]
fconfigure $s -buffering line
catch {
for {set x 0} {$x < 50} {incr x} {
puts $s "hello abcdefghijklmnop"
gets $s
}
}
close $s
catch {set x [gets $f]}
close $f
set x
} {done 50}
test tlsIO-2.9 {socket conflict} {socket stdio} {
set s [tls::socket -server accept 2828]
removeFile script
set f [open script w]
puts -nonewline $f {package require tls; tls::socket -server accept 2828}
close $f
set f [open "|[list $::tcltest::tcltest script]" r]
gets $f
after 100
set x [list [catch {close $f} msg] $msg]
close $s
set x
} {1 {couldn't open socket: address already in use
while executing
"::socket -server {tls::_accept {-server 1} accept} 2828"
("eval" body line 1)
invoked from within
"eval ::socket $sopts"
(procedure "tls::socket" line 62)
invoked from within
"tls::socket -server accept 2828"
(file "script" line 1)}}
test tlsIO-2.10 {close on accept, accepted socket lives} {socket knownBug} {
set done 0
set timer [after 20000 "set done timed_out"]
set ss [tls::socket -server accept -certfile $serverCert -cafile $caCert \
-keyfile $serverKey 2830]
proc accept {s a p} {
global ss
close $ss
fileevent $s readable "readit $s"
fconfigure $s -trans lf
}
proc readit {s} {
global done
gets $s
close $s
set done 1
}
set cs [tls::socket -certfile $clientCert -cafile $caCert \
-keyfile $clientKey [info hostname] 2830]
close $cs
vwait done
after cancel $timer
set done
} 1
test tlsIO-2.11 {detecting new data} {socket knownBug} {
proc accept {s a p} {
global sock
set sock $s
set f [open awb.log w]
puts $f [catch {tls::handshake $sock} err]
puts $f "err: $err"
puts $f "[tls::status $sock]"
close $s
}
set s [tls::socket -require 0 -request 0 -server accept -certfile $serverCert -cafile $caCert \
-keyfile $serverKey 2400]
set sock ""
set s2 [tls::socket -certfile $clientCert -cafile $caCert \
-keyfile $clientKey 127.0.0.1 2400]
vwait sock
puts $s2 one
flush $s2
after 500
fconfigure $sock -blocking 0
set result [gets $sock]
lappend result [gets $sock]
fconfigure $sock -blocking 1
puts $s2 two
flush $s2
fconfigure $sock -blocking 0
lappend result [gets $sock]
fconfigure $sock -blocking 1
close $s2
close $s
close $sock
set result
} {one {} two}
test tlsIO-2.12 {tcp connection; no certificates specified} {socket stdio pcCrash} {
removeFile script
set f [open script w]
puts $f {
package require tls
set timer [after 2000 "set x timed_out"]
set f [tls::socket -server accept 2828]
proc accept {file addr port} {
global x
set x done
close $file
}
puts ready
vwait x
after cancel $timer
close $f
puts $x
}
close $f
set f [open "|[list $::tcltest::tcltest script]" r]
gets $f x
if {[catch {tls::socket 127.0.0.1 2828} msg]} {
set x $msg
} else {
lappend x [gets $f]
close $msg
}
lappend x [gets $f]
close $f
set x
} {ready done {}}
test tlsIO-3.1 {socket conflict} {socket stdio} {
removeFile script
set f [open script w]
puts $f {
package require tls
}
puts $f "set f \[tls::socket -server accept -certfile $serverCert -cafile $caCert -keyfile $serverKey 2828 \]"
puts $f {
puts ready
gets stdin
close $f
}
close $f
set f [open "|[list $::tcltest::tcltest script]" r+]
gets $f
set x [list [catch {tls::socket \
-certfile $clientCert -cafile $caCert -keyfile $clientKey \
-server accept 2828} msg] \
$msg]
puts $f bye
close $f
set x
} {1 {couldn't open socket: address already in use}}
test tlsIO-3.2 {server with several clients} {socket stdio} {
removeFile script
set f [open script w]
puts $f {
package require tls
set t1 [after 30000 "set x timed_out"]
set t2 [after 31000 "set x timed_out"]
set t3 [after 32000 "set x timed_out"]
set counter 0
}
puts $f "set s \[tls::socket -server accept -certfile $serverCert -cafile $caCert -keyfile $serverKey 2828 \]"
puts $f {
proc accept {s a p} {
fileevent $s readable [list echo $s]
fconfigure $s -buffering line
}
proc echo {s} {
global x
set l [gets $s]
if {[eof $s]} {
close $s
set x done
} else {
puts $s $l
}
}
puts ready
vwait x
after cancel $t1
vwait x
after cancel $t2
vwait x
after cancel $t3
close $s
puts $x
}
close $f
set f [open "|[list $::tcltest::tcltest script]" r+]
set x [gets $f]
set s1 [tls::socket \
-certfile $clientCert -cafile $caCert -keyfile $clientKey \
127.0.0.1 2828]
fconfigure $s1 -buffering line
set s2 [tls::socket \
-certfile $clientCert -cafile $caCert -keyfile $clientKey \
127.0.0.1 2828]
fconfigure $s2 -buffering line
set s3 [tls::socket \
-certfile $clientCert -cafile $caCert -keyfile $clientKey \
127.0.0.1 2828]
fconfigure $s3 -buffering line
for {set i 0} {$i < 100} {incr i} {
puts $s1 hello,s1
gets $s1
puts $s2 hello,s2
gets $s2
puts $s3 hello,s3
gets $s3
}
close $s1
close $s2
close $s3
lappend x [gets $f]
close $f
set x
} {ready done}
test tlsIO-4.1 {server with several clients} {socket stdio} {
removeFile script
set f [open script w]
puts $f {
package require tls
gets stdin
}
puts $f "set s \[tls::socket -certfile $clientCert -cafile $caCert -keyfile $clientKey 127.0.0.1 2828 \]"
puts $f {
fconfigure $s -buffering line
for {set i 0} {$i < 100} {incr i} {
puts $s hello
gets $s
}
close $s
puts bye
gets stdin
}
close $f
set p1 [open "|[list $::tcltest::tcltest script]" r+]
fconfigure $p1 -buffering line
set p2 [open "|[list $::tcltest::tcltest script]" r+]
fconfigure $p2 -buffering line
set p3 [open "|[list $::tcltest::tcltest script]" r+]
fconfigure $p3 -buffering line
proc accept {s a p} {
fconfigure $s -buffering line
fileevent $s readable [list echo $s]
}
proc echo {s} {
global x
set l [gets $s]
if {[eof $s]} {
close $s
set x done
} else {
puts $s $l
}
}
set t1 [after 30000 "set x timed_out"]
set t2 [after 31000 "set x timed_out"]
set t3 [after 32000 "set x timed_out"]
set s [tls::socket \
-certfile $serverCert -cafile $caCert -keyfile $serverKey \
-server accept 2828]
puts $p1 open
puts $p2 open
puts $p3 open
vwait x
vwait x
vwait x
after cancel $t1
after cancel $t2
after cancel $t3
close $s
set l ""
lappend l [list p1 [gets $p1] $x]
lappend l [list p2 [gets $p2] $x]
lappend l [list p3 [gets $p3] $x]
puts $p1 bye
puts $p2 bye
puts $p3 bye
close $p1
close $p2
close $p3
set l
} {{p1 bye done} {p2 bye done} {p3 bye done}}
test tlsIO-4.2 {byte order problems, socket numbers, htons} {socket} {
set x ok
if {[catch {tls::socket -server dodo 0x3000} msg]} {
set x $msg
} else {
close $msg
}
set x
} ok
test tlsIO-5.1 {byte order problems, socket numbers, htons} \
{socket unixOnly notRoot} {
set x {couldn't open socket: not owner}
if {![catch {tls::socket -server dodo 0x1} msg]} {
set x {htons problem, should be disallowed, are you running as SU?}
close $msg
}
set x
} {couldn't open socket: not owner}
test tlsIO-5.2 {byte order problems, socket numbers, htons} {socket} {
set x {couldn't open socket: port number too high}
if {![catch {tls::socket -server dodo 0x10000} msg]} {
set x {port resolution problem, should be disallowed}
close $msg
}
set x
} {couldn't open socket: port number too high}
test tlsIO-5.3 {byte order problems, socket numbers, htons} \
{socket unixOnly notRoot} {
set x {couldn't open socket: not owner}
if {![catch {tls::socket -server dodo 21} msg]} {
set x {htons problem, should be disallowed, are you running as SU?}
close $msg
}
set x
} {couldn't open socket: not owner}
test tlsIO-6.1 {accept callback error} {socket stdio pcCrash} {
removeFile script
set f [open script w]
puts $f {
package require tls
gets stdin
tls::socket 127.0.0.1 2848
}
close $f
set f [open "|[list $::tcltest::tcltest script]" r+]
proc bgerror args {
global x
set x $args
}
proc accept {s a p} {expr 10 / 0}
set s [tls::socket -server accept 2848]
puts $f hello
close $f
set timer [after 10000 "set x timed_out"]
vwait x
after cancel $timer
close $s
rename bgerror {}
set x
} {{divide by zero}}
test tlsIO-7.1 {testing socket specific options} {socket stdio} {
removeFile script
set f [open script w]
puts $f {
package require tls
}
puts $f "tls::socket -server accept -certfile $serverCert -cafile $caCert -keyfile $serverKey 2820"
puts $f {
proc accept args {
global x
set x done
}
puts ready
set timer [after 10000 "set x timed_out"]
vwait x
after cancel $timer
}
close $f
set f [open "|[list $::tcltest::tcltest script]" r]
gets $f
set s [tls::socket \
-certfile $clientCert -cafile $caCert -keyfile $clientKey \
127.0.0.1 2820]
set p [fconfigure $s -peername]
close $s
close $f
set l ""
lappend l [string compare [lindex $p 0] 127.0.0.1]
lappend l [string compare [lindex $p 2] 2820]
lappend l [llength $p]
} {0 0 3}
test tlsIO-7.2 {testing socket specific options} {socket stdio} {
removeFile script
set f [open script w]
puts $f {
package require tls
}
puts $f "tls::socket -server accept -certfile $serverCert -cafile $caCert -keyfile $serverKey 2821"
puts $f {
proc accept args {
global x
set x done
}
puts ready
set timer [after 10000 "set x timed_out"]
vwait x
after cancel $timer
}
close $f
set f [open "|[list $::tcltest::tcltest script]" r]
gets $f
set s [tls::socket \
-certfile $clientCert -cafile $caCert -keyfile $clientKey \
127.0.0.1 2821]
set p [fconfigure $s -sockname]
close $s
close $f
set l ""
lappend l [llength $p]
lappend l [lindex $p 0]
lappend l [string equal [lindex $p 2] 2821]
} {3 127.0.0.1 0}
test tlsIO-7.3 {testing socket specific options} {socket} {
set s [tls::socket \
-certfile $serverCert -cafile $caCert -keyfile $serverKey \
-server accept 2822]
set l [fconfigure $s]
close $s
update
llength $l
} 12
test tlsIO-7.4 {testing socket specific options} {socket} {
set s [tls::socket \
-certfile $serverCert -cafile $caCert -keyfile $serverKey \
-server accept 2823]
proc accept {s a p} {
global x
set x [fconfigure $s -sockname]
close $s
}
set s1 [tls::socket \
-certfile $clientCert -cafile $caCert -keyfile $clientKey \
[info hostname] 2823]
set timer [after 10000 "set x timed_out"]
vwait x
after cancel $timer
close $s
close $s1
set l ""
lappend l [lindex $x 2] [llength $x]
} {2823 3}
test tlsIO-7.5 {testing socket specific options} {socket unixOrPc} {
set s [tls::socket \
-certfile $serverCert -cafile $caCert -keyfile $serverKey \
-server accept 2829]
proc accept {s a p} {
global x
set x [fconfigure $s -sockname]
close $s
}
set s1 [tls::socket \
-certfile $clientCert -cafile $caCert -keyfile $clientKey \
127.0.0.1 2829]
set timer [after 10000 "set x timed_out"]
vwait x
after cancel $timer
close $s
close $s1
set l ""
lappend l [lindex $x 0] [lindex $x 2] [llength $x]
} {127.0.0.1 2829 3}
test tlsIO-8.1 {testing -async flag on sockets} {empty socket} {
# test seems to hang -- awb 6/2/2000
# NOTE: This test may fail on some Solaris 2.4 systems. If it does,
# check that you have these patches installed (using showrev -p):
#
# 101907-05, 101925-02, 101945-14, 101959-03, 101969-05, 101973-03,
# 101977-03, 101981-02, 101985-01, 102001-03, 102003-01, 102007-01,
# 102011-02, 102024-01, 102039-01, 102044-01, 102048-01, 102062-03,
# 102066-04, 102070-01, 102105-01, 102153-03, 102216-01, 102232-01,
# 101878-03, 101879-01, 101880-03, 101933-01, 101950-01, 102030-01,
# 102057-08, 102140-01, 101920-02, 101921-09, 101922-07, 101923-03
#
# If after installing these patches you are still experiencing a
# problem, please email [email protected]. We have not observed this
# failure on Solaris 2.5, so another option (instead of installing
# these patches) is to upgrade to Solaris 2.5.
set s [tls::socket \
-certfile $serverCert -cafile $caCert -keyfile $serverKey \
-server accept 2830]
proc accept {s a p} {
global x
puts $s bye
close $s
set x done
}
set s1 [tls::socket \
-certfile $clientCert -cafile $caCert -keyfile $clientKey \
-async [info hostname] 2830]
vwait x
set z [gets $s1]
close $s
close $s1
set z
} bye
test tlsIO-9.1 {testing spurious events} {empty socket} {
# locks up
set len 0
set spurious 0
set done 0
proc readlittle {s} {
global spurious done len
set l [read $s 1]
if {[string length $l] == 0} {
if {![eof $s]} {
incr spurious
} else {
close $s
set done 1
}
} else {
incr len [string length $l]
}
}
proc accept {s a p} {
fconfigure $s -buffering none -blocking off
fileevent $s readable [list readlittle $s]
}
set s [tls::socket \
-certfile $serverCert -cafile $caCert -keyfile $serverKey \
-server accept 2831]
set c [tls::socket \
-certfile $clientCert -cafile $caCert -keyfile $clientKey \
[info hostname] 2831]
puts -nonewline $c 01234567890123456789012345678901234567890123456789
close $c
set timer [after 10000 "set done timed_out"]
vwait done
after cancel $timer
close $s
list $spurious $len
} {0 50}
test tlsIO-9.2 {testing async write, fileevents, flush on close} {socket} {
set firstblock ""
for {set i 0} {$i < 5} {incr i} {set firstblock "a$firstblock$firstblock"}
set secondblock ""
for {set i 0} {$i < 16} {incr i} {
set secondblock "b$secondblock$secondblock"
}
set l [tls::socket \
-certfile $serverCert -cafile $caCert -keyfile $serverKey \
-server accept 2832]
proc accept {s a p} {
fconfigure $s -blocking 0 -translation lf -buffersize 16384 \
-buffering line
fileevent $s readable "readable $s"
}
proc readable {s} {
set l [gets $s]
fileevent $s readable {}
after 1000 respond $s
}
proc respond {s} {
global firstblock
puts -nonewline $s $firstblock
after 1000 writedata $s
}
proc writedata {s} {
global secondblock
puts -nonewline $s $secondblock
close $s
}
set s [tls::socket \
-certfile $clientCert -cafile $caCert -keyfile $clientKey \
[info hostname] 2832]
fconfigure $s -blocking 0 -trans lf -buffering line
set count 0
puts $s hello
proc readit {s} {
global count done
set l [read $s]
incr count [string length $l]
if {[eof $s]} {
close $s
set done 1
}
}
fileevent $s readable "readit $s"
set timer [after 10000 "set done timed_out"]
vwait done
after cancel $timer
close $l
set count
} 65566
test tlsIO-9.3 {testing EOF stickyness} {empty socket} {
# hangs
proc count_to_eof {s} {
global count done timer
set l [gets $s]
if {[eof $s]} {
incr count
if {$count > 9} {
close $s
set done true
set count {eof is sticky}
after cancel $timer
}
}
}
proc timerproc {} {
global done count c
set done true
set count {timer went off, eof is not sticky}
close $c
}
set count 0
set done false
proc write_then_close {s} {
puts $s bye
close $s
}
proc accept {s a p} {
fconfigure $s -buffering line -translation lf
fileevent $s writable "write_then_close $s"
}
set s [tls::socket \
-certfile $serverCert -cafile $caCert -keyfile $serverKey \
-server accept 2833]
set c [tls::socket \
-certfile $clientCert -cafile $caCert -keyfile $clientKey \
[info hostname] 2833]
fconfigure $c -blocking off -buffering line -translation lf
fileevent $c readable "count_to_eof $c"
set timer [after 1000 timerproc]
vwait done
close $s
set count
} {eof is sticky}
removeFile script
test tlsIO-10.1 {testing socket accept callback error handling} {socket} {
set goterror 0
proc bgerror args {global goterror; set goterror 1}
set s [tls::socket \
-certfile $serverCert -cafile $caCert -keyfile $serverKey \
-server accept 2898]
proc accept {s a p} {close $s; error}
set c [tls::socket \
-certfile $clientCert -cafile $caCert -keyfile $clientKey \
127.0.0.1 2898]
vwait goterror
close $s
close $c
set goterror
} 1
test tlsIO-11.1 {tcp connection} {socket doTestsWithRemoteServer} {
sendCommand "set caCert $caCert"
sendCommand "set serverCert $serverCert"
sendCommand "set clientCert $clientCert"
sendCommand "set serverKey $serverKey"
sendCommand "set clientKey $clientKey"
sendCommand {
set socket9_1_test_server [tls::socket -server accept \
-certfile $serverCert \
-cafile $caCert \
-keyfile $serverKey \
2834]
proc accept {s a p} {
puts $s done
tls::handshake $s
close $s
}
}
set s [tls::socket \
-certfile $clientCert -cafile $caCert -keyfile $clientKey \
$remoteServerIP 2834]
set r [gets $s]
close $s
sendCommand {close $socket9_1_test_server}
set r
} done
test tlsIO-11.2 {client specifies its port} {socket doTestsWithRemoteServer} {
sendCommand "set caCert $caCert"
sendCommand "set serverCert $serverCert"
sendCommand "set clientCert $clientCert"
sendCommand "set serverKey $serverKey"
sendCommand "set clientKey $clientKey"
if {[info exists port]} {
incr port
} else {
set port [expr 2048 + [pid]%1024]
}
sendCommand {
set socket9_2_test_server [tls::socket -server accept \
-certfile $serverCert \
-cafile $caCert \
-keyfile $serverKey \
2835]
proc accept {s a p} {
tls::handshake $s
puts $s $p
close $s
}
}
set s [tls::socket \
-certfile $clientCert -cafile $caCert -keyfile $clientKey \
-myport $port $remoteServerIP 2835]
set r [gets $s]
close $s
sendCommand {close $socket9_2_test_server}
if {$r == $port} {
set result ok
} else {
set result broken
}
set result
} ok
test tlsIO-11.3 {trying to connect, no server} {socket doTestsWithRemoteServer} {
set status ok
if {![catch {set s [tls::socket \
-certfile $clientCert -cafile $caCert -keyfile $clientKey \
$remoteServerIp 2836]}]} {
if {![catch {gets $s}]} {
set status broken
}
close $s
}
set status
} ok
test tlsIO-11.4 {remote echo, one line} {socket doTestsWithRemoteServer} {
sendCommand "set caCert $caCert"
sendCommand "set serverCert $serverCert"
sendCommand "set clientCert $clientCert"
sendCommand "set serverKey $serverKey"
sendCommand "set clientKey $clientKey"
sendCommand {
global serverCert
global caCert
global serverKey
set socket10_6_test_server [tls::socket \
-certfile $serverCert \
-cafile $caCert \
-keyfile $serverKey \
-server accept 2836]
proc accept {s a p} {
tls::handshake $s
fileevent $s readable [list echo $s]
fconfigure $s -buffering line -translation crlf
}
proc echo {s} {
set l [gets $s]
if {[eof $s]} {
close $s
} else {
puts $s $l
}
}
}
set f [tls::socket \
-certfile $clientCert -cafile $caCert -keyfile $clientKey \
$remoteServerIP 2836]
fconfigure $f -translation crlf -buffering line
puts $f hello
set r [gets $f]
close $f
sendCommand {close $socket10_6_test_server}
set r
} hello
test tlsIO-11.5 {remote echo, 50 lines} {socket doTestsWithRemoteServer} {
sendCommand "set caCert $caCert"
sendCommand "set serverCert $serverCert"
sendCommand "set clientCert $clientCert"
sendCommand "set serverKey $serverKey"
sendCommand "set clientKey $clientKey"
sendCommand {
set socket10_7_test_server [tls::socket -server accept \
-certfile $serverCert \
-cafile $caCert \
-keyfile $serverKey \
2836]
proc accept {s a p} {
tls::handshake $s
fileevent $s readable [list echo $s]
fconfigure $s -buffering line -translation crlf
}
proc echo {s} {
set l [gets $s]
if {[eof $s]} {
close $s
} else {
puts $s $l
}
}
}
set f [tls::socket \
-certfile $clientCert -cafile $caCert -keyfile $clientKey \
$remoteServerIP 2836]
fconfigure $f -translation crlf -buffering line
for {set cnt 0} {$cnt < 50} {incr cnt} {
puts $f "hello, $cnt"
if {[string compare [gets $f] "hello, $cnt"] != 0} {
break
}
}
close $f
sendCommand {close $socket10_7_test_server}
set cnt
} 50
# Macintosh sockets can have more than one server per port
if {$tcl_platform(platform) == "macintosh"} {
set conflictResult {0 2836}
} else {
set conflictResult {1 {couldn't open socket: address already in use}}
}
test tlsIO-11.6 {socket conflict} {socket doTestsWithRemoteServer} {
set s1 [tls::socket \
-certfile $serverCert -cafile $caCert -keyfile $serverKey \
-server accept 2836]
if {[catch {set s2 [tls::socket \
-certfile $serverCert -cafile $caCert -keyfile $serverKey \
-server accept 2836]} msg]} {
set result [list 1 $msg]
} else {
set result [list 0 [lindex [fconfigure $s2 -sockname] 2]]
close $s2
}
close $s1
set result
} $conflictResult
test tlsIO-11.7 {server with several clients} {socket doTestsWithRemoteServer} {
sendCommand {
set socket10_9_test_server [tls::socket \
-certfile [file join [pwd] certs server.pem] \
-cafile [file join [pwd] certs caFile.pem] \
-keyfile [file join [pwd] certs skey.pem] \
-server accept 2836]
proc accept {s a p} {
# handshake locks up the three synchronous clients
# tls::handshake $s
fconfigure $s -buffering line
fileevent $s readable [list echo $s]
}
proc echo {s} {
set l [gets $s]
if {[eof $s]} {
close $s
} else {
puts $s $l
}
}
}
set s1 [tls::socket \
-certfile $clientCert -cafile $caCert -keyfile $clientKey \
$remoteServerIP 2836]
fconfigure $s1 -buffering line
set s2 [tls::socket \
-certfile $clientCert -cafile $caCert -keyfile $clientKey \
$remoteServerIP 2836]
fconfigure $s2 -buffering line
set s3 [tls::socket \
-certfile $clientCert -cafile $caCert -keyfile $clientKey \
$remoteServerIP 2836]
fconfigure $s3 -buffering line
for {set i 0} {$i < 100} {incr i} {
puts $s1 hello,s1
gets $s1
puts $s2 hello,s2
gets $s2
puts $s3 hello,s3
gets $s3
}
close $s1
close $s2
close $s3
sendCommand {close $socket10_9_test_server}
set i
} 100
test tlsIO-11.8 {client with several servers} {empty socket doTestsWithRemoteServer} {
# this one seems to hang -- awb 6/2/2000
sendCommand {
set s1 [tls::socket \
-certfile [file join [pwd] certs server.pem] \
-cafile [file join [pwd] certs caFile.pem] \
-keyfile [file join [pwd] certs skey.pem] \
-server "accept 4003" 4003]
set s2 [tls::socket \
-certfile [file join [pwd] certs server.pem] \
-cafile [file join [pwd] certs caFile.pem] \
-keyfile [file join [pwd] certs skey.pem] \
-server "accept 4004" 4004]
set s3 [tls::socket \
-certfile [file join [pwd] certs server.pem] \
-cafile [file join [pwd] certs caFile.pem] \
-keyfile [file join [pwd] certs skey.pem] \
-server "accept 4005" 4005]
proc accept {mp s a p} {
tls::handshake $s
puts $s $mp
close $s
}
}
set s1 [tls::socket \
-certfile $clientCert -cafile $caCert -keyfile $clientKey \
$remoteServerIP 4003]
set s2 [tls::socket \
-certfile $clientCert -cafile $caCert -keyfile $clientKey \
$remoteServerIP 4004]
set s3 [tls::socket \
-certfile $clientCert -cafile $caCert -keyfile $clientKey \
$remoteServerIP 4005]
set l ""
lappend l [gets $s1] [gets $s1] [eof $s1] [gets $s2] [gets $s2] [eof $s2] \
[gets $s3] [gets $s3] [eof $s3]
close $s1
close $s2
close $s3
sendCommand {
close $s1
close $s2
close $s3
}
set l
} {4003 {} 1 4004 {} 1 4005 {} 1}
test tlsIO-11.9 {accept callback error} {socket doTestsWithRemoteServer} {
set s [tls::socket \
-certfile $serverCert -cafile $caCert -keyfile $serverKey \
-server accept 2836]
proc accept {s a p} {expr 10 / 0}
proc bgerror args {
global x
set x $args
}
sendCommand "set caCert $caCert"
sendCommand "set serverCert $serverCert"
sendCommand "set clientCert $clientCert"
sendCommand "set serverKey $serverKey"
sendCommand "set clientKey $clientKey"
if {[catch {sendCommand {
set peername [fconfigure $callerSocket -peername]
set s [tls::socket \
-certfile $clientCert \
-cafile $caCert \
-keyfile $clientKey \
[lindex $peername 0] 2836]
close $s
}} msg]} {
close $s
error $msg
}
set timer [after 10000 "set x timed_out"]
vwait x
after cancel $timer
close $s
rename bgerror {}
set x
} {{divide by zero}}
test tlsIO-11.10 {testing socket specific options} {socket doTestsWithRemoteServer} {
sendCommand "set caCert $caCert"
sendCommand "set serverCert $serverCert"
sendCommand "set clientCert $clientCert"
sendCommand "set serverKey $serverKey"
sendCommand "set clientKey $clientKey"
sendCommand {
set socket10_12_test_server [tls::socket \
-certfile $serverCert \
-cafile $caCert \
-keyfile $serverKey \
-server accept 2836]
proc accept {s a p} {close $s}
}
set s [tls::socket \
-certfile $clientCert -cafile $caCert -keyfile $clientKey \
$remoteServerIP 2836]
set p [fconfigure $s -peername]
set n [fconfigure $s -sockname]
set l ""
lappend l [lindex $p 2] [llength $p] [llength $p]
close $s
sendCommand {close $socket10_12_test_server}
set l
} {2836 3 3}
test tlsIO-11.11 {testing spurious events} {empty socket doTestsWithRemoteServer} {
# hangs
sendCommand "set caCert $caCert"
sendCommand "set serverCert $serverCert"
sendCommand "set clientCert $clientCert"
sendCommand "set serverKey $serverKey"
sendCommand "set clientKey $clientKey"
sendCommand {
set socket10_13_test_server [tls::socket \
-certfile $serverCert \
-cafile $caCert \
-keyfile $serverKey \
-server accept 2836]
proc accept {s a p} {
tls::handshake $s
fconfigure $s -translation "auto lf"
after 100 writesome $s
}
proc writesome {s} {
for {set i 0} {$i < 100} {incr i} {
puts $s "line $i from remote server"
}
close $s
}
}
set len 0
set spurious 0
set done 0
proc readlittle {s} {
global spurious done len
set l [read $s 1]
if {[string length $l] == 0} {
if {![eof $s]} {
incr spurious
} else {
close $s
set done 1
}
} else {
incr len [string length $l]
}
}
set c [tls::socket \
-certfile $clientCert -cafile $caCert -keyfile $clientKey \
$remoteServerIP 2836]
fileevent $c readable "readlittle $c"
set timer [after 10000 "set done timed_out"]
vwait done
after cancel $timer
sendCommand {close $socket10_13_test_server}
list $spurious $len
} {0 2690}
test tlsIO-11.12 {testing EOF stickyness} {socket doTestsWithRemoteServer} {
set counter 0
set done 0
proc count_up {s} {
global counter done after_id
set l [gets $s]
if {[eof $s]} {
incr counter
if {$counter > 9} {
set done {EOF is sticky}
after cancel $after_id
close $s
}
}
}
proc timed_out {} {
global c done
set done {timed_out, EOF is not sticky}
close $c
}
sendCommand "set caCert $caCert"
sendCommand "set serverCert $serverCert"
sendCommand "set clientCert $clientCert"
sendCommand "set serverKey $serverKey"
sendCommand "set clientKey $clientKey"
sendCommand {
set socket10_14_test_server [tls::socket \
-certfile $serverCert \
-cafile $caCert \
-keyfile $serverKey \
-server accept 2836]
proc accept {s a p} {
tls::handshake $s
after 100 close $s
}
}
set c [tls::socket \
-certfile $clientCert -cafile $caCert -keyfile $clientKey \
$remoteServerIP 2836]
fileevent $c readable "count_up $c"
set after_id [after 1000 timed_out]
vwait done
sendCommand {close $socket10_14_test_server}
set done
} {EOF is sticky}
test tlsIO-11.13 {testing async write, async flush, async close} \
{socket doTestsWithRemoteServer} {
proc readit {s} {
global count done
set l [read $s]
incr count [string length $l]
if {[eof $s]} {
close $s
set done 1
}
}
sendCommand "set caCert $caCert"
sendCommand "set serverCert $serverCert"
sendCommand "set clientCert $clientCert"
sendCommand "set serverKey $serverKey"
sendCommand "set clientKey $clientKey"
sendCommand {
set firstblock ""
for {set i 0} {$i < 5} {incr i} {
set firstblock "a$firstblock$firstblock"
}
set secondblock ""
for {set i 0} {$i < 16} {incr i} {
set secondblock "b$secondblock$secondblock"
}
set l [tls::socket \
-certfile $serverCert \
-cafile $caCert \
-keyfile $serverKey \
-server accept 2845]
proc accept {s a p} {
tls::handshake $s
fconfigure $s -blocking 0 -translation lf -buffersize 16384 \
-buffering line
fileevent $s readable "readable $s"
}
proc readable {s} {
set l [gets $s]
fileevent $s readable {}
after 1000 respond $s
}
proc respond {s} {
global firstblock
puts -nonewline $s $firstblock
after 1000 writedata $s
}
proc writedata {s} {
global secondblock
puts -nonewline $s $secondblock
close $s
}
}
set s [tls::socket \
-certfile $clientCert -cafile $caCert -keyfile $clientKey \
$remoteServerIP 2845]
fconfigure $s -blocking 0 -trans lf -buffering line
set count 0
puts $s hello
fileevent $s readable "readit $s"
set timer [after 10000 "set done timed_out"]
vwait done
after cancel $timer
sendCommand {close $l}
set count
} 65566
test tlsIO-12.1 {testing inheritance of server sockets} \
{socket doTestsWithRemoteServer} {
removeFile script1
removeFile script2
# Script1 is just a 10 second delay. If the server socket
# is inherited, it will be held open for 10 seconds
set f [open script1 w]
puts $f {
after 10000 exit
vwait forever
}
close $f
# Script2 creates the server socket, launches script1,
# waits a second, and exits. The server socket will now
# be closed unless script1 inherited it.
set f [open script2 w]
# puts $f [list set tcltest $::tcltest::tcltest]
puts $f [list set tclsh [info nameofexecutable]]
puts $f {
package require tcltest
package require tls
}
puts $f "set f \[tls::socket -server accept -certfile $serverCert -cafile $caCert -keyfile $serverKey 2828 \]"
puts $f {
proc accept { file addr port } {
close $file
}
# exec $::tcltest::tcltest script1 &
exec $tclsh script1 &
close $f
after 1000 exit
vwait forever
}
close $f
# Launch script2 and wait 5 seconds
# exec $::tcltest::tcltest script2 &
exec [info nameofexecutable] script2 &
after 5000 { set ok_to_proceed 1 }
vwait ok_to_proceed
# If we can still connect to the server, the socket got inherited.
if {[catch {tls::socket \
-certfile $clientCert -cafile $caCert -keyfile $clientKey \
127.0.0.1 2828} msg]} {
set x {server socket was not inherited}
} else {
close $msg
set x {server socket was inherited}
}
removeFile script1
removeFile script2
set x
} {server socket was not inherited}
test tlsIO-12.2 {testing inheritance of client sockets} \
{socket doTestsWithRemoteServer} {
removeFile script1
removeFile script2
# Script1 is just a 10 second delay. If the server socket
# is inherited, it will be held open for 10 seconds
set f [open script1 w]
puts $f {
after 10000 exit
vwait forever
}
close $f
# Script2 opens the client socket and writes to it. It then
# launches script1 and exits. If the child process inherited the
# client socket, the socket will still be open.
set f [open script2 w]
puts $f [list set tclsh [info nameofexecutable]]
puts $f {
package require tls
}
puts $f "set f \[tls::socket -certfile $clientCert -cafile $caCert -keyfile $clientKey 127.0.0.1 2829 \]"
puts $f {
exec $tclsh script1 &
puts $f testing
flush $f
after 1000 exit
vwait forever
}
close $f
# Create the server socket
set server [tls::socket \
-certfile $serverCert -cafile $caCert -keyfile $serverKey \
-server accept 2829]
proc accept { file host port } {
# When the client connects, establish the read handler
global server
close $server
fileevent $file readable [list getdata $file]
fconfigure $file -buffering line -blocking 0
return
}
proc getdata { file } {
# Read handler on the accepted socket.
global x
global failed
set status [catch {read $file} data]
if {$status != 0} {
set x {read failed, error was $data}
catch { close $file }
} elseif {[string compare {} $data]} {
} elseif {[fblocked $file]} {
} elseif {[eof $file]} {
if {$failed} {
set x {client socket was inherited}
} else {
set x {client socket was not inherited}
}
catch { close $file }
} else {
set x {impossible case}
catch { close $file }
}
return
}
# If the socket doesn't hit end-of-file in 5 seconds, the
# script1 process must have inherited the client.
set failed 0
after 5000 [list set failed 1]
# Launch the script2 process
exec [info nameofexecutable] script2 &
vwait x
if {!$failed} {
vwait failed
}
removeFile script1
removeFile script2
set x
} {client socket was not inherited}
test tlsIO-12.3 {testing inheritance of accepted sockets} \
{empty socket doTestsWithRemoteServer} {
# hangs on Linux
removeFile script1
removeFile script2
set f [open script1 w]
puts $f {
after 10000 exit
vwait forever
}
close $f
set f [open script2 w]
puts $f [list set tclsh [info nameofexecutable]]
puts $f {
package require tls
}
puts $f "catch {set f \[tls::socket -server accept -certfile $serverCert -cafile $caCert -keyfile $serverKey 2930 \]}"
puts $f {
proc accept { file host port } {
global tclsh
puts $file {test data on socket}
exec $tclsh script1 &
after 1000 exit
}
catch {vwait forever}
}
close $f
# Launch the script2 process and connect to it. See how long
# the socket stays open
exec [info nameofexecutable] script2 &
after 1000 set ok_to_proceed 1
vwait ok_to_proceed
set f [tls::socket \
-certfile $clientCert -cafile $caCert -keyfile $clientKey \
127.0.0.1 2930]
fconfigure $f -buffering full -blocking 0
fileevent $f readable [list getdata $f]
# If the socket is still open after 5 seconds, the script1 process
# must have inherited the accepted socket.
set failed 0
after 5000 set failed 1
proc getdata { file } {
# Read handler on the client socket.
global x
global failed
set status [catch {read $file} data]
if {$status != 0} {
set x {read failed, error was $data}
catch { close $file }
} elseif {[string compare {} $data]} {
} elseif {[fblocked $file]} {
} elseif {[eof $file]} {
if {$failed} {
set x {accepted socket was inherited}
} else {
set x {accepted socket was not inherited}
}
catch { close $file }
} else {
set x {impossible case}
catch { close $file }
}
return
}
vwait x
removeFile script1
removeFile script2
set x
} {accepted socket was not inherited}
test tlsIO-13.1 {Testing use of shared socket between two threads} \
{socket testthread} {
removeFile script
threadReap
makeFile {
package require tls
set f [tls::socket -server accept 2828]
proc accept {s a p} {
fileevent $s readable [list echo $s]
fconfigure $s -buffering line
}
proc echo {s} {
global i
set l [gets $s]
if {[eof $s]} {
global x
close $s
set x done
} else {
incr i
puts $s $l
}
}
set i 0
vwait x
close $f
# thread cleans itself up.
testthread exit
} script
# create a thread
set serverthread [testthread create { source script } ]
update
after 1000
set s [tls::socket 127.0.0.1 2828]
fconfigure $s -buffering line
catch {
puts $s "hello"
gets $s result
}
close $s
update
after 2000
lappend result [threadReap]
set result
} {hello 1}
# cleanup
if {[string match sock* $commandSocket] == 1} {
puts $commandSocket exit
flush $commandSocket
}
catch {close $commandSocket}
catch {close $remoteProcChan}
::tcltest::cleanupTests
flush stdout
return