# makefile.vc -- -*- Makefile -*-
#
# Microsoft Visual C++ makefile for use with nmake.exe v1.62+ (VC++ 5.0+)
#
# This makefile is based upon the Tcl 8.4 Makefile.vc and modified to
# make it suitable as a general package makefile. Look for the word EDIT
# which marks sections that may need modification. As a minumum you will
# need to change the PROJECT, DOTVERSION and DLLOBJS variables to values
# relevant to your package.
#
# See the file "license.terms" for information on usage and redistribution
# of this file, and for a DISCLAIMER OF ALL WARRANTIES.
#
# Copyright (c) 1995-1996 Sun Microsystems, Inc.
# Copyright (c) 1998-2000 Ajuba Solutions.
# Copyright (c) 2001 ActiveState Corporation.
# Copyright (c) 2001-2002 David Gravereaux.
# Copyright (c) 2003 Pat Thoyts
#
#-------------------------------------------------------------------------
# RCS: @(#)$Id: makefile.vc,v 1.3 2007/02/28 23:33:41 patthoyts Exp $
#-------------------------------------------------------------------------
!if !defined(MSDEVDIR) && !defined(MSVCDIR) && !defined(VCToolkitInstallDir)
MSG = ^
You will need to run vcvars32.bat from Developer Studio, first, to setup^
the environment. Jump to this line to read the new instructions.
!error $(MSG)
!endif
#------------------------------------------------------------------------------
# HOW TO USE this makefile:
#
# 1) It is now necessary to have %MSVCDir% set in the environment. This is
# used as a check to see if vcvars32.bat had been run prior to running
# nmake or during the installation of Microsoft Visual C++, MSVCDir had
# been set globally and the PATH adjusted. Either way is valid.
#
# You'll need to run vcvars32.bat contained in the MsDev's vc(98)/bin
# directory to setup the proper environment, if needed, for your current
# setup. This is a needed bootstrap requirement and allows the swapping of
# different environments to be easier.
#
# 2) To use the Platform SDK (not expressly needed), run setenv.bat after
# vcvars32.bat according to the instructions for it. This can also turn on
# the 64-bit compiler, if your SDK has it.
#
# 3) Targets are:
# all -- Builds everything.
# <project> -- Builds the project (eg: nmake sample)
# test -- Builds and runs the test suite.
# install -- Installs the built binaries and libraries to $(INSTALLDIR)
# in an appropriate subdirectory.
# clean/realclean/distclean -- varying levels of cleaning.
#
# 4) Macros usable on the commandline:
# INSTALLDIR=<path>
# Sets where to install Tcl from the built binaries.
# C:\Progra~1\Tcl is assumed when not specified.
#
# OPTS=static,msvcrt,staticpkg,threads,symbols,profile,loimpact,none
# Sets special options for the core. The default is for none.
# Any combination of the above may be used (comma separated).
# 'none' will over-ride everything to nothing.
#
# static = Builds a static library of the core instead of a
# dll. The shell will be static (and large), as well.
# msvcrt = Effects the static option only to switch it from
# using libcmt(d) as the C runtime [by default] to
# msvcrt(d). This is useful for static embedding
# support.
# staticpkg = Effects the static option only to switch
# tclshXX.exe to have the dde and reg extension linked
# inside it.
# threads = Turns on full multithreading support.
# thrdalloc = Use the thread allocator (shared global free pool).
# symbols = Adds symbols for step debugging.
# profile = Adds profiling hooks. Map file is assumed.
# loimpact = Adds a flag for how NT treats the heap to keep memory
# in use, low. This is said to impact alloc performance.
#
# STATS=memdbg,compdbg,none
# Sets optional memory and bytecode compiler debugging code added
# to the core. The default is for none. Any combination of the
# above may be used (comma separated). 'none' will over-ride
# everything to nothing.
#
# memdbg = Enables the debugging memory allocator.
# compdbg = Enables byte compilation logging.
#
# MACHINE=(IX86|IA64|ALPHA)
# Set the machine type used for the compiler, linker, and
# resource compiler. This hook is needed to tell the tools
# when alternate platforms are requested. IX86 is the default
# when not specified.
#
# TMP_DIR=<path>
# OUT_DIR=<path>
# Hooks to allow the intermediate and output directories to be
# changed. $(OUT_DIR) is assumed to be
# $(BINROOT)\(Release|Debug) based on if symbols are requested.
# $(TMP_DIR) will de $(OUT_DIR)\<buildtype> by default.
#
# TESTPAT=<file>
# Reads the tests requested to be run from this file.
#
# CFG_ENCODING=encoding
# name of encoding for configuration information. Defaults
# to cp1252
#
# 5) Examples:
#
# Basic syntax of calling nmake looks like this:
# nmake [-nologo] -f makefile.vc [target|macrodef [target|macrodef] [...]]
#
# Standard (no frills)
# c:\tcl_src\win\>c:\progra~1\micros~1\vc98\bin\vcvars32.bat
# Setting environment for using Microsoft Visual C++ tools.
# c:\tcl_src\win\>nmake -f makefile.vc all
# c:\tcl_src\win\>nmake -f makefile.vc install INSTALLDIR=c:\progra~1\tcl
#
# Building for Win64
# c:\tcl_src\win\>c:\progra~1\micros~1\vc98\bin\vcvars32.bat
# Setting environment for using Microsoft Visual C++ tools.
# c:\tcl_src\win\>c:\progra~1\platfo~1\setenv.bat /pre64 /RETAIL
# Targeting Windows pre64 RETAIL
# c:\tcl_src\win\>nmake -f makefile.vc MACHINE=IA64
#
#------------------------------------------------------------------------------
#==============================================================================
###############################################################################
#------------------------------------------------------------------------------
!if !exist("makefile.vc")
MSG = ^
You must run this makefile only from the directory it is in.^
Please `cd` to its location first.
!error $(MSG)
!endif
#-------------------------------------------------------------------------
# Project specific information (EDIT)
#
# You should edit this with the name and version of your project. This
# information is used to generate the name of the package library and
# it's install location.
#
# For example, the sample extension is going to build sample04.dll and
# would install it into $(INSTALLDIR)\lib\sample04
#
# You need to specify the object files that need to be linked into your
# binary here.
#
#-------------------------------------------------------------------------
PROJECT = tls
!include "rules.vc"
DOTVERSION = 1.5.1
VERSION = $(DOTVERSION:.=)
STUBPREFIX = $(PROJECT)stub
DLLOBJS = \
$(TMP_DIR)\tls.obj \
$(TMP_DIR)\tlsBIO.obj \
$(TMP_DIR)\tlsIO.obj \
$(TMP_DIR)\tlsX509.obj \
$(TMP_DIR)\tls.res
#-------------------------------------------------------------------------
# Locate the OpenSSL library and headers
#-------------------------------------------------------------------------
!ifndef OPENSSL
OPENSSL = c:\opt
!endif
SSL_INCLUDE_DIR = $(OPENSSL)\include
SSL_LIB_DIR = $(OPENSSL)\lib
SSL_LIBS =-libpath:"$(SSL_LIB_DIR)" ssleay32s.lib libeay32s.lib
SSL_CFLAGS =-DNO_IDEA=1 -DNO_RC5=1
!if !exist("$(SSL_LIB_DIR)\ssleay32s.lib")
MSG = ^
You must provide the path to your OpenSSL library....
!error $(MSG)
!endif
#-------------------------------------------------------------------------
# Target names and paths ( shouldn't need changing )
#-------------------------------------------------------------------------
BINROOT = .
ROOT = ..
PRJIMPLIB = $(OUT_DIR)\$(PROJECT)$(VERSION)$(SUFX).lib
PRJLIBNAME = $(PROJECT)$(VERSION)$(SUFX).$(EXT)
PRJLIB = $(OUT_DIR)\$(PRJLIBNAME)
PRJSTUBLIBNAME = $(STUBPREFIX)$(VERSION).lib
PRJSTUBLIB = $(OUT_DIR)\$(PRJSTUBLIBNAME)
### Make sure we use backslash only.
PRJ_INSTALL_DIR = $(_INSTALLDIR)\$(PROJECT)$(DOTVERSION)
LIB_INSTALL_DIR = $(PRJ_INSTALL_DIR)
BIN_INSTALL_DIR = $(PRJ_INSTALL_DIR)
DOC_INSTALL_DIR = $(PRJ_INSTALL_DIR)
SCRIPT_INSTALL_DIR = $(PRJ_INSTALL_DIR)
INCLUDE_INSTALL_DIR = $(_TCLDIR)\include
### The following paths CANNOT have spaces in them.
GENERICDIR = $(ROOT)
WINDIR = $(ROOT)\win
LIBDIR = $(ROOT)
DOCDIR = $(ROOT)
TOOLSDIR = $(ROOT)\tools
COMPATDIR = $(ROOT)\compat
#---------------------------------------------------------------------
# Compile flags
#---------------------------------------------------------------------
!if !$(DEBUG)
!if $(OPTIMIZING)
### This cranks the optimization level to maximize speed
cdebug = -O2 -Op -Gs
!else
cdebug =
!endif
!else if "$(MACHINE)" == "IA64"
### Warnings are too many, can't support warnings into errors.
cdebug = -Z7 -Od -GZ
!else
cdebug = -Z7 -WX -Od -GZ
!endif
### Declarations common to all compiler options
cflags = -nologo -c -W3 -YX -Fp$(TMP_DIR)^\
!if $(PENT_0F_ERRATA)
cflags = $(cflags) -QI0f
!endif
!if $(ITAN_B_ERRATA)
cflags = $(cflags) -QIA64_Bx
!endif
!if $(MSVCRT)
!if $(DEBUG)
crt = -MDd
!else
crt = -MD
!endif
!else
!if $(DEBUG)
crt = -MTd
!else
crt = -MT
!endif
!endif
INCLUDES = $(TCL_INCLUDES) -I"$(WINDIR)" -I"$(GENERICDIR)" \
-I"$(SSL_INCLUDE_DIR)"
BASE_CLFAGS = $(cflags) $(cdebug) $(crt) $(INCLUDES)
CON_CFLAGS = $(cflags) $(cdebug) $(crt) -DCONSOLE
TCL_CFLAGS = -DUSE_TCL_STUBS -DBUILD_$(PROJECT) $(SSL_CFLAGS) \
-DPACKAGE_VERSION="\"$(DOTVERSION)\"" \
-DPACKAGE_NAME="\"$(PROJECT)\"" \
$(BASE_CLFAGS) $(OPTDEFINES)
#---------------------------------------------------------------------
# Link flags
#---------------------------------------------------------------------
!if $(DEBUG)
ldebug = -debug:full -debugtype:cv
!else
ldebug = -release -opt:ref -opt:icf,3
!endif
### Declarations common to all linker options
lflags = -nologo -machine:$(MACHINE) $(ldebug)
!if $(PROFILE)
lflags = $(lflags) -profile
!endif
!if $(ALIGN98_HACK) && !$(STATIC_BUILD)
### Align sections for PE size savings.
lflags = $(lflags) -opt:nowin98
!else if !$(ALIGN98_HACK) && $(STATIC_BUILD)
### Align sections for speed in loading by choosing the virtual page size.
lflags = $(lflags) -align:4096
!endif
!if $(LOIMPACT)
lflags = $(lflags) -ws:aggressive
!endif
dlllflags = $(lflags) -dll
conlflags = $(lflags) -subsystem:console
guilflags = $(lflags) -subsystem:windows
baselibs = $(TCLSTUBLIB) $(SSL_LIBS) ws2_32.lib user32.lib gdi32.lib advapi32.lib
#---------------------------------------------------------------------
# TclTest flags
#---------------------------------------------------------------------
!IF "$(TESTPAT)" != ""
TESTFLAGS = $(TESTFLAGS) -file $(TESTPAT)
!ENDIF
#---------------------------------------------------------------------
# Project specific targets (EDIT)
#---------------------------------------------------------------------
all: setup $(PROJECT)
$(PROJECT): setup $(PRJLIB)
install: install-binaries install-libraries install-docs
# Tests need to ensure we load the right dll file we
# have to handle the output differently on Win9x.
#
!if "$(OS)" == "Windows_NT" || "$(MSVCDIR)" == "IDE"
test: setup $(PROJECT)
set TCL_LIBRARY=$(ROOT)/library
$(TCLSH) <<
load $(PRJLIB:\=/)
source [file normalize [file join $(LIBDIR) tls.tcl]]
cd "$(ROOT)/tests"
set argv "$(TESTFLAGS)"
source all.tcl
<<
!else
test: setup $(PROJECT)
echo Please wait while the test results are collected
set TCL_LIBRARY=$(ROOT)/library
$(TCLSH) << >tests.log
load $(PRJLIB:\=/)
source [file normalize [file join $(LIBDIR) tls.tcl]]
cd "$(ROOT)/tests"
set argv "$(TESTFLAGS)"
source all.tcl
<<
type tests.log | more
!endif
setup:
@if not exist $(OUT_DIR)\nul mkdir $(OUT_DIR)
@if not exist $(TMP_DIR)\nul mkdir $(TMP_DIR)
# See <tcl>/win/coffbase.txt for extension base addresses.
$(PRJLIB): $(DLLOBJS)
$(link32) $(dlllflags) -base:0x10780000 -out:$@ $(baselibs) @<<
$**
<<
-@del $*.exp
$(PRJSTUBLIB): $(PRJSTUBOBJS)
$(lib32) -nologo -out:$@ $(PRJSTUBOBJS)
#---------------------------------------------------------------------
# Implicit rules
#---------------------------------------------------------------------
{$(WINDIR)}.c{$(TMP_DIR)}.obj::
$(cc32) $(TCL_CFLAGS) -DBUILD_$(PROJECT) -Fo$(TMP_DIR)\ @<<
$<
<<
{$(GENERICDIR)}.c{$(TMP_DIR)}.obj::
$(cc32) $(TCL_CFLAGS) -DBUILD_$(PROJECT) -Fo$(TMP_DIR)\ @<<
$<
<<
{$(COMPATDIR)}.c{$(TMP_DIR)}.obj::
$(cc32) $(TCL_CFLAGS) -DBUILD_$(PROJECT) -Fo$(TMP_DIR)\ @<<
$<
<<
{$(WINDIR)}.rc{$(TMP_DIR)}.res:
$(rc32) -fo $@ -r -i "$(GENERICDIR)" -D__WIN32__ \
-DCOMMAVERSION=$(DOTVERSION:.=,),0 \
-DDOTVERSION=\"$(DOTVERSION)\" \
-DVERSION=\"$(VERSION)$(SUFX)\" \
!if $(DEBUG)
-d DEBUG \
!endif
!if $(TCL_THREADS)
-d TCL_THREADS \
!endif
!if $(STATIC_BUILD)
-d STATIC_BUILD \
!endif
$<
.SUFFIXES:
.SUFFIXES:.c .rc
#---------------------------------------------------------------------
# Installation. (EDIT)
#
# You may need to modify this section to reflect the final distribution
# of your files and possibly to generate documentation.
#
#---------------------------------------------------------------------
install-binaries:
@echo Installing binaries to '$(SCRIPT_INSTALL_DIR)'
@if not exist "$(SCRIPT_INSTALL_DIR)" mkdir "$(SCRIPT_INSTALL_DIR)"
@$(CPY) $(PRJLIB) "$(SCRIPT_INSTALL_DIR)" >NUL
install-libraries:
@echo Installing libraries to '$(SCRIPT_INSTALL_DIR)'
@if exist $(LIBDIR) $(CPY) $(LIBDIR)\tls.tcl "$(SCRIPT_INSTALL_DIR)" > NUL
@echo Installing package index in '$(SCRIPT_INSTALL_DIR)'
@type << >"$(SCRIPT_INSTALL_DIR)\pkgIndex.tcl"
# pkgIndex.tcl -
if {![package vsatisfies [package provide Tcl] 8.3]} {return}
package ifneeded $(PROJECT) $(DOTVERSION) "[list load [file join $$dir $(PROJECT)$(VERSION).$(EXT)] Tls] ; [list source [file join $$dir tls.tcl]]"
<<
install-docs:
@echo Installing documentation files to '$(DOC_INSTALL_DIR)'
@if exist $(DOCDIR) $(CPY) $(DOCDIR)\tls.htm "$(DOC_INSTALL_DIR)" >NUL
#---------------------------------------------------------------------
# Clean up
#---------------------------------------------------------------------
clean:
@if exist $(TMP_DIR)\nul $(RMDIR) $(TMP_DIR)
@if exist $(WINDIR)\version.vc del $(WINDIR)\version.vc
realclean: clean
@if exist $(OUT_DIR)\nul $(RMDIR) $(OUT_DIR)
distclean: realclean
@if exist $(WINDIR)\nmakehlp.exe del $(WINDIR)\nmakehlp.exe
@if exist $(WINDIR)\nmakehlp.obj del $(WINDIR)\nmakehlp.obj