# that your library may use.  TCL_DEFS can actually be a problem if
# you do not compile with a similar machine setup as the Tcl core was
# compiled with.
#DEFS		= $(TCL_DEFS) @DEFS@ $(PKG_CFLAGS)
DEFS		= @DEFS@ $(PKG_CFLAGS)

# Move pkgIndex.tcl to 'BINARIES' var if it is generated in the Makefile
CONFIG_CLEAN_FILES = Makefile pkgIndex.tcl tlsUuid.h
CLEANFILES	= @CLEANFILES@

CPPFLAGS	= @CPPFLAGS@
LIBS		= @PKG_LIBS@ @LIBS@
AR		= @AR@
CFLAGS		= @CFLAGS@
LDFLAGS		= @LDFLAGS@

doc:
	@echo "If you have documentation to create, place the commands to"
	@echo "build the docs in the 'doc:' target.  For example:"
	@echo "        xml2nroff sample.xml > sample.n"
	@echo "        xml2html sample.xml > sample.html"

install: all install-binaries install-libraries install-doc-n install-doc-html

install-binaries: binaries install-lib-binaries install-bin-binaries

#========================================================================
# This rule installs platform-independent files, such as header files.
# The list=...; for p in $$list handles the empty list case x-platform.
#========================================================================

install-libraries: libraries
	@$(INSTALL_DATA_DIR) "$(DESTDIR)$(includedir)"
	@echo "Installing header files in $(DESTDIR)$(includedir)"
	@list='$(PKG_HEADERS)'; for i in $$list; do \
	    echo "Installing $(srcdir)/$$i" ; \
	    $(INSTALL_DATA) $(srcdir)/$$i "$(DESTDIR)$(includedir)" ; \
	done

#========================================================================
# Install documentation.  Unix manpages should go in the $(mandir)
# directory.
#========================================================================

install-doc-html: doc
	@$(INSTALL_DATA_DIR) "$(DESTDIR)$(pkglibdir)/html"
	@echo "Installing HTML documentation in $(DESTDIR)$(pkglibdir)/html"
	@list='doc/*.html'; for i in $$list; do \
	    if test -f $$i ; then \
		echo "Installing $$i"; \
		$(INSTALL_DATA) $$i "$(DESTDIR)$(pkglibdir)/html"; \
	    fi; \
	done

install-doc-n: doc
	@$(INSTALL_DATA_DIR) "$(DESTDIR)$(mandir)/mann"
	@echo "Installing nroff documentation in $(DESTDIR)$(mandir)/mann"
	@list='doc/*.n'; for i in $$list; do \
	    if test -f $$i ; then \
		if test -f "$(DESTDIR)$(mandir)/mann/Tcl.n.gz" -o \
		    "$(DESTDIR)$(mandir)/mann/Tcl*.n.gz" ; then \
		    gzip -k $$i ; \
		    echo "Installing $$i.gz"; \
		    $(INSTALL_DATA) $$i.gz "$(DESTDIR)$(mandir)/mann" ; \
		    rm -f $$i.gz;\
		else \
		    echo "Installing $$i"; \
		    $(INSTALL_DATA) $$i "$(DESTDIR)$(mandir)/mann" ; \
		fi; \
	    fi; \
	done

#========================================================================
# Test and debug
#========================================================================

test: binaries libraries
	$(TCLSH) `@CYGPATH@ $(srcdir)/tests/all.tcl` $(TESTFLAGS) \
	    -load "package ifneeded $(PACKAGE_NAME) $(PACKAGE_VERSION) \
		[list load `@CYGPATH@ $(PKG_LIB_FILE)` [string totitle $(PACKAGE_NAME)]]"

shell: binaries libraries

	${MAKE_LIB}
	$(RANLIB) $(PKG_LIB_FILE)

$(PKG_STUB_LIB_FILE): $(PKG_STUB_OBJECTS)
	-rm -f $(PKG_STUB_LIB_FILE)
	${MAKE_STUB_LIB}
	$(RANLIB_STUB) $(PKG_STUB_LIB_FILE)

#========================================================================
# Support files needed to compile C code
#========================================================================

# Create a C-source-ified version of the script resources for this
# package so that we only need a single file to enable this extension.
# I would prefer to use $< over $?, but FreeBSD's can't handle it, and
# with only one prereq, $? is sufficient.
tls.tcl.h: library/tls.tcl
	sed -e '/^\\s*\#/d' -e '/^\\s*$$/d' -e 's/\\/\\\\/g' -e 's/\"/\\"/g' -e 's/^/"/' \
	    -e 's/$$/\\n\"/' '$?' > '$@' || { rm -f $@; exit 1; }

# Create header file with fossil, git, or svn UUID for build-info command 
$(srcdir)/manifest.uuid:
	printf "git-" >$(srcdir)/manifest.uuid
	(cd $(srcdir); git rev-parse HEAD >>$(srcdir)/manifest.uuid || \
	    (printf "svn-r" >$(srcdir)/manifest.uuid ; \
	    svn info --show-item last-changed-revision >>$(srcdir)/manifest.uuid) || \
	    printf "unknown" >$(srcdir)/manifest.uuid)

tlsUuid.h:	$(srcdir)/manifest.uuid
	echo "#define TLS_VERSION_UUID \\" >$@
	cat $(srcdir)/manifest.uuid >>$@
	echo "" >>$@

#========================================================================
# We need to enumerate the list of .c to .o lines here.
#
# In the following lines, $(srcdir) refers to the toplevel directory
# containing your extension.  If your sources are in a subdirectory,
# you will have to modify the paths to reflect this:
#
# sample.$(OBJEXT): $(srcdir)/generic/sample.c
# 	$(COMPILE) -c `@CYGPATH@ $(srcdir)/generic/sample.c` -o $@
#
# Setting the VPATH variable to a list of paths will cause the makefile
# to look into these paths when resolving .c to .obj dependencies.
# As necessary, add $(srcdir):$(srcdir)/compat:....
#========================================================================

VPATH = $(srcdir):$(srcdir)/generic:$(srcdir)/unix:$(srcdir)/win:$(srcdir)/macosx

tls.@OBJEXT@:	tlsUuid.h tls.tcl.h










.c.@OBJEXT@:

	$(COMPILE) -c `@CYGPATH@ $<` -o $@












#========================================================================
# Create the pkgIndex.tcl file.
# It is usually easiest to let Tcl do this for you with pkg_mkIndex, but
# you may find that you need to customize the package.  If so, either
# modify the -hand version, or create a pkgIndex.tcl.in file and have
# the configure script output the pkgIndex.tcl by editing configure.in.
#========================================================================

DIST_DIR	= $(DIST_ROOT)/$(PKG_DIR)

DIST_INSTALL_DATA	= CPPROG='cp -p' $(INSTALL) -m 644
DIST_INSTALL_DATA_RECUR	= CPPROG='cp -p -R' $(INSTALL)
DIST_INSTALL_SCRIPT	= CPPROG='cp -p' $(INSTALL) -m 755

dist-clean:
	rm -rf $(DIST_DIR) $(top_builddir)/$(PKG_DIR).tar.*

dist: dist-clean manifest.uuid
	# TEA files
	$(INSTALL_DATA_DIR) $(DIST_DIR)
	$(DIST_INSTALL_DATA) $(srcdir)/Makefile.in \
		$(srcdir)/acinclude.m4 $(srcdir)/aclocal.m4 \
		$(srcdir)/configure.ac $(DIST_DIR)/
	$(DIST_INSTALL_SCRIPT) $(srcdir)/configure $(DIST_DIR)/

	# Extension files
	$(DIST_INSTALL_DATA) $(srcdir)/ChangeLog \
		$(srcdir)/license.terms $(srcdir)/manifest.uuid \
		$(srcdir)/README.txt $(srcdir)/pkgIndex.tcl.in $(DIST_DIR)/












	list='build demos doc generic library tclconfig tests win'; \
	for p in $$list; do \
	    if test -d $(srcdir)/$$p ; then \
		$(INSTALL_DATA_DIR) $(DIST_DIR)/$$p; \
		$(DIST_INSTALL_DATA_RECUR) $(srcdir)/$$p/* $(DIST_DIR)/$$p/; \
	    fi; \
	done

	(cd $(DIST_ROOT); $(COMPRESS);)

	mv $(DIST_ROOT)/$(PKG_DIR).tar.gz $(top_builddir)
	cd $(top_builddir)

#========================================================================
# End of user-definable section
#========================================================================

#========================================================================
# Don't modify the file to clean here.  Instead, set the "CLEANFILES"
# variable in configure.ac
#========================================================================

clean:
	-test -z "$(BINARIES)" || rm -f $(BINARIES)
	-rm -f *.$(OBJEXT) core *.core
	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)

distclean: clean
	-rm -f *.tab.c
	-rm -f $(CONFIG_CLEAN_FILES)
	-rm -f config.cache config.log config.status configure~
	-rm -fR autom4te.cache

#========================================================================
# Install binary object libraries.  On Windows this includes both .dll and
# .lib files.  Because the .lib files are not explicitly listed anywhere,
# we need to deduce their existence from the .dll file of the same name.
# Library files go into the lib directory.

	    $(INSTALL_DATA) $(srcdir)/$$p "$(DESTDIR)$(pkglibdir)/$$destp"; \
	  fi; \
	done
	@if test "x$(SHARED_BUILD)" = "x1"; then \
	    echo " Install pkgIndex.tcl $(DESTDIR)$(pkglibdir)"; \
	    $(INSTALL_DATA) pkgIndex.tcl "$(DESTDIR)$(pkglibdir)"; \
	fi
	@if test -f "$(srcdir)/tlsConfig.sh"; then \
	    $(INSTALL_DATA) $(srcdir)/tlsConfig.sh $(DESTDIR)$(libdir); \
	fi

#========================================================================
# Install binary executables (e.g. .exe files and dependent .dll files)
# This is for files that must go in the bin directory (located next to
# wish and tclsh), like dependent .dll files on Windows.
#
# You should not have to modify this target, except to define bin_BINARIES