/* * TLS Channel - This extension provides a encrypted communication channel * using the TLS or SSL protocols. It can be layered on top of any * bi-directional Tcl_Channel. * * This was initially built (almost) from scratch based upon observation of * OpenSSL 0.9.2B. * * Copyright (C) 1997-1999 Matt Newman <[email protected]> * some modifications: * Copyright (C) 2000 Ajuba Solutions * Copyright (C) 2002 ActiveState Corporation * Copyright (C) 2004 Starfish Systems * Copyright (C) 2023 Brian O'Hagan * * Additional credit is due for Andreas Kupries ([email protected]), for * providing the Tcl_ReplaceChannel mechanism and working closely with me * to enhance it to support full fileevent semantics. * * Also work done by the follow people provided the impetus to do this "right": * tclSSL (Colin McCormack, Shared Technology) * SSLtcl (Peter Antman) * */ #include "tlsInt.h" #include "tclOpts.h" #include "tlsUuid.h" #include <stdio.h> #include <stdlib.h> #include <openssl/ssl.h> #include <openssl/crypto.h> #include <openssl/opensslconf.h> #include <openssl/rsa.h> #include <openssl/safestack.h> /* Min OpenSSL version */ #if OPENSSL_VERSION_NUMBER < 0x10101000L #error "Only OpenSSL v1.1.1 or later is supported" #endif /* * Forward declarations */ #define F2N(key, dsp) \ (((key) == NULL) ? (char *) NULL : \ Tcl_TranslateFileName(interp, (key), (dsp))) static SSL_CTX *CTX_Init(State *statePtr, int isServer, int proto, char *key, char *certfile, unsigned char *key_asn1, unsigned char *cert_asn1, Tcl_Size key_asn1_len, Tcl_Size cert_asn1_len, char *CApath, char *CAstore, char *CAfile, char *ciphers, char *ciphersuites, int level, char *DHparams); #define TLS_PROTO_SSL2 0x01 #define TLS_PROTO_SSL3 0x02 #define TLS_PROTO_TLS1 0x04 #define TLS_PROTO_TLS1_1 0x08 #define TLS_PROTO_TLS1_2 0x10 #define TLS_PROTO_TLS1_3 0x20 #define ENABLED(flag, mask) (((flag) & (mask)) == (mask)) #define SSLKEYLOGFILE "SSLKEYLOGFILE" /********************/ /* Callbacks */ /********************/ /* *------------------------------------------------------------------- * * Eval Callback Command -- * * Eval callback command and catch any errors * * Results: * 0 = Command returned fail or eval returned TCL_ERROR * 1 = Command returned success or eval returned TCL_OK * * Side effects: * Evaluates callback command * *------------------------------------------------------------------- */ static int EvalCallback(Tcl_Interp *interp, State *statePtr, Tcl_Obj *cmdPtr) { int code, ok = 0; dprintf("Called"); Tcl_Preserve((ClientData) interp); Tcl_Preserve((ClientData) statePtr); /* Eval callback with success for ok or return value 1, fail for error or return value 0 */ Tcl_ResetResult(interp); code = Tcl_EvalObjEx(interp, cmdPtr, TCL_EVAL_GLOBAL); dprintf("EvalCallback: %d", code); if (code == TCL_OK) { /* Check result for return value */ Tcl_Obj *result = Tcl_GetObjResult(interp); if (result == NULL || Tcl_GetIntFromObj(interp, result, &ok) != TCL_OK) { ok = 1; } dprintf("Result: %d", ok); } else { /* Error - reject the certificate */ dprintf("Tcl_BackgroundError"); #if (TCL_MAJOR_VERSION == 8) && (TCL_MINOR_VERSION < 6) Tcl_BackgroundError(interp); #else Tcl_BackgroundException(interp, code); #endif } Tcl_Release((ClientData) statePtr); Tcl_Release((ClientData) interp); return ok; } /* *------------------------------------------------------------------- * * InfoCallback -- * * Monitors SSL connection process * * Results: * None * * Side effects: * Calls callback (if defined) * *------------------------------------------------------------------- */ static void InfoCallback(const SSL *ssl, int where, int ret) { State *statePtr = (State*)SSL_get_app_data((SSL *)ssl); Tcl_Interp *interp = statePtr->interp; Tcl_Obj *cmdPtr; const char *major, *minor; dprintf("Called"); if (statePtr->callback == (Tcl_Obj*)NULL) { return; } if (where & SSL_CB_HANDSHAKE_START) { major = "handshake"; minor = "start"; } else if (where & SSL_CB_HANDSHAKE_DONE) { major = "handshake"; minor = "done"; } else { if (where & SSL_CB_ALERT) major = "alert"; else if (where & SSL_ST_CONNECT) major = "connect"; else if (where & SSL_ST_ACCEPT) major = "accept"; else major = "unknown"; if (where & SSL_CB_READ) minor = "read"; else if (where & SSL_CB_WRITE) minor = "write"; else if (where & SSL_CB_LOOP) minor = "loop"; else if (where & SSL_CB_EXIT) minor = "exit"; else minor = "unknown"; } /* Create command to eval with fn, chan, major, minor, message, and type args */ cmdPtr = Tcl_DuplicateObj(statePtr->callback); Tcl_ListObjAppendElement(interp, cmdPtr, Tcl_NewStringObj("info", -1)); Tcl_ListObjAppendElement(interp, cmdPtr, Tcl_NewStringObj(Tcl_GetChannelName(statePtr->self), -1)); Tcl_ListObjAppendElement(interp, cmdPtr, Tcl_NewStringObj(major, -1)); Tcl_ListObjAppendElement(interp, cmdPtr, Tcl_NewStringObj(minor, -1)); if (where & SSL_CB_ALERT) { Tcl_ListObjAppendElement(interp, cmdPtr, Tcl_NewStringObj(SSL_alert_desc_string_long(ret), -1)); Tcl_ListObjAppendElement(interp, cmdPtr, Tcl_NewStringObj(SSL_alert_type_string_long(ret), -1)); } else { Tcl_ListObjAppendElement(interp, cmdPtr, Tcl_NewStringObj(SSL_state_string_long(ssl), -1)); Tcl_ListObjAppendElement(interp, cmdPtr, Tcl_NewStringObj("info", -1)); } /* Eval callback command */ Tcl_IncrRefCount(cmdPtr); EvalCallback(interp, statePtr, cmdPtr); Tcl_DecrRefCount(cmdPtr); } /* *------------------------------------------------------------------- * * MessageCallback -- * * Monitors SSL protocol messages * * Results: * None * * Side effects: * Calls callback (if defined) * *------------------------------------------------------------------- */ #ifndef OPENSSL_NO_SSL_TRACE static void MessageCallback(int write_p, int version, int content_type, const void *buf, size_t len, SSL *ssl, void *arg) { State *statePtr = (State*)arg; Tcl_Interp *interp = statePtr->interp; Tcl_Obj *cmdPtr; char *ver, *type; BIO *bio; char buffer[15000]; buffer[0] = 0; dprintf("Called"); if (statePtr->callback == (Tcl_Obj*)NULL) { return; } switch(version) { #if OPENSSL_VERSION_NUMBER < 0x10100000L && !defined(NO_SSL2) && !defined(OPENSSL_NO_SSL2) case SSL2_VERSION: ver = "SSLv2"; break; #endif #if !defined(NO_SSL3) && !defined(OPENSSL_NO_SSL3) case SSL3_VERSION: ver = "SSLv3"; break; #endif case TLS1_VERSION: ver = "TLSv1"; break; case TLS1_1_VERSION: ver = "TLSv1.1"; break; case TLS1_2_VERSION: ver = "TLSv1.2"; break; case TLS1_3_VERSION: ver = "TLSv1.3"; break; case 0: ver = "none"; break; default: ver = "unknown"; break; } switch (content_type) { case SSL3_RT_HEADER: type = "Header"; break; case SSL3_RT_INNER_CONTENT_TYPE: type = "Inner Content Type"; break; case SSL3_RT_CHANGE_CIPHER_SPEC: type = "Change Cipher"; break; case SSL3_RT_ALERT: type = "Alert"; break; case SSL3_RT_HANDSHAKE: type = "Handshake"; break; case SSL3_RT_APPLICATION_DATA: type = "App Data"; break; #if OPENSSL_VERSION_NUMBER < 0x30000000L case DTLS1_RT_HEARTBEAT: type = "Heartbeat"; break; #endif default: type = "unknown"; } /* Needs compile time option "enable-ssl-trace". */ if ((bio = BIO_new(BIO_s_mem())) != NULL) { int n; SSL_trace(write_p, version, content_type, buf, len, ssl, (void *)bio); n = BIO_read(bio, buffer, BIO_pending(bio) < 15000 ? BIO_pending(bio) : 14999); n = (n<0) ? 0 : n; buffer[n] = 0; (void)BIO_flush(bio); BIO_free(bio); } dprintf("Message direction=%d, ver=%s, type=%s, message=%s", write_p, ver, type, &buffer[0]); /* Create command to eval with fn, chan, direction, version, type, and message args */ cmdPtr = Tcl_DuplicateObj(statePtr->callback); Tcl_ListObjAppendElement(interp, cmdPtr, Tcl_NewStringObj("message", -1)); Tcl_ListObjAppendElement(interp, cmdPtr, Tcl_NewStringObj(Tcl_GetChannelName(statePtr->self), -1)); Tcl_ListObjAppendElement(interp, cmdPtr, Tcl_NewStringObj(write_p ? "Sent" : "Received", -1)); Tcl_ListObjAppendElement(interp, cmdPtr, Tcl_NewStringObj(ver, -1)); Tcl_ListObjAppendElement(interp, cmdPtr, Tcl_NewStringObj(type, -1)); Tcl_ListObjAppendElement(interp, cmdPtr, Tcl_NewStringObj(buffer, -1)); /* Eval callback command */ Tcl_IncrRefCount(cmdPtr); EvalCallback(interp, statePtr, cmdPtr); Tcl_DecrRefCount(cmdPtr); } #endif /* *------------------------------------------------------------------- * * VerifyCallback -- * * Monitors SSL certificate validation process. Used to control the * behavior when the SSL_VERIFY_PEER flag is set. This is called * whenever a certificate is inspected or decided invalid. Called for * each certificate in the cert chain. * * Checks: * The certificate chain is checked starting with the deepest nesting level * (the root CA certificate) and worked upward to the peer's certificate. * All signatures are valid, current time is within first and last validity time. * Check that the certificate is issued by the issuer certificate issuer. * Check the revocation status for each certificate. * Check the validity of the given CRL and the cert revocation status. * Check the policies of all the certificates * * Args * preverify_ok indicates whether the certificate verification passed (1) or not (0) * * Results: * A callback bound to the socket may return one of: * 0 - the certificate is deemed invalid, send verification * failure alert to peer, and terminate handshake. * 1 - the certificate is deemed valid, continue with handshake. * empty string - no change to certificate validation * * Side effects: * The err field of the currently operative State is set * to a string describing the SSL negotiation failure reason * *------------------------------------------------------------------- */ static int VerifyCallback(int ok, X509_STORE_CTX *ctx) { Tcl_Obj *cmdPtr; SSL *ssl = (SSL*)X509_STORE_CTX_get_ex_data(ctx, SSL_get_ex_data_X509_STORE_CTX_idx()); X509 *cert = X509_STORE_CTX_get_current_cert(ctx); State *statePtr = (State*)SSL_get_app_data(ssl); Tcl_Interp *interp = statePtr->interp; int depth = X509_STORE_CTX_get_error_depth(ctx); int err = X509_STORE_CTX_get_error(ctx); dprintf("Called"); dprintf("VerifyCallback: %d", ok); if (statePtr->vcmd == (Tcl_Obj*)NULL) { /* Use ok value if verification is required */ if (statePtr->vflags & SSL_VERIFY_FAIL_IF_NO_PEER_CERT) { return ok; } else { return 1; } } else if (cert == NULL || ssl == NULL) { return 0; } dprintf("VerifyCallback: create callback command"); /* Create command to eval with fn, chan, depth, cert info list, status, and error args */ cmdPtr = Tcl_DuplicateObj(statePtr->vcmd); Tcl_ListObjAppendElement(interp, cmdPtr, Tcl_NewStringObj("verify", -1)); Tcl_ListObjAppendElement(interp, cmdPtr, Tcl_NewStringObj(Tcl_GetChannelName(statePtr->self), -1)); Tcl_ListObjAppendElement(interp, cmdPtr, Tcl_NewIntObj(depth)); Tcl_ListObjAppendElement(interp, cmdPtr, Tls_NewX509Obj(interp, cert, 0)); Tcl_ListObjAppendElement(interp, cmdPtr, Tcl_NewIntObj(ok)); Tcl_ListObjAppendElement(interp, cmdPtr, Tcl_NewStringObj((char*)X509_verify_cert_error_string(err), -1)); /* Prevent I/O while callback is in progress */ /* statePtr->flags |= TLS_TCL_CALLBACK; */ dprintf("VerifyCallback: eval callback"); /* Eval callback command */ Tcl_IncrRefCount(cmdPtr); ok = EvalCallback(interp, statePtr, cmdPtr); Tcl_DecrRefCount(cmdPtr); dprintf("VerifyCallback: command result = %d", ok); /* statePtr->flags &= ~(TLS_TCL_CALLBACK); */ return ok; /* By default, leave verification unchanged. */ } /* *------------------------------------------------------------------- * * Tls_Error -- * * Calls callback with error message. * * Side effects: * The err field of the currently operative State is set * to a string describing the SSL negotiation failure reason * *------------------------------------------------------------------- */ void Tls_Error(State *statePtr, const char *msg) { Tcl_Interp *interp = statePtr->interp; Tcl_Obj *cmdPtr, *listPtr; unsigned long err; statePtr->err = msg; dprintf("Called with message %s", msg); if (statePtr->callback == (Tcl_Obj*)NULL) { return; } dprintf("Tls_Error: create callback command"); /* Create command to eval with fn, chan, and message args */ cmdPtr = Tcl_DuplicateObj(statePtr->callback); Tcl_ListObjAppendElement(interp, cmdPtr, Tcl_NewStringObj("error", -1)); Tcl_ListObjAppendElement(interp, cmdPtr, Tcl_NewStringObj(Tcl_GetChannelName(statePtr->self), -1)); if (msg != NULL) { Tcl_ListObjAppendElement(interp, cmdPtr, Tcl_NewStringObj(msg, -1)); } else if ((msg = Tcl_GetString(Tcl_GetObjResult(interp))) != NULL) { Tcl_ListObjAppendElement(interp, cmdPtr, Tcl_NewStringObj(msg, -1)); } else { listPtr = Tcl_NewListObj(0, NULL); while ((err = ERR_get_error()) != 0) { Tcl_ListObjAppendElement(interp, listPtr, Tcl_NewStringObj(ERR_reason_error_string(err), -1)); } Tcl_ListObjAppendElement(interp, cmdPtr, listPtr); } dprintf("Tls_Error: eval callback"); /* Eval callback command */ Tcl_IncrRefCount(cmdPtr); EvalCallback(interp, statePtr, cmdPtr); Tcl_DecrRefCount(cmdPtr); } /* *------------------------------------------------------------------- * * KeyLogCallback -- * * Write received key data to log file. * * Side effects: * none * *------------------------------------------------------------------- */ void KeyLogCallback(const SSL *ssl, const char *line) { char *str = getenv(SSLKEYLOGFILE); FILE *fd; dprintf("Called"); if (str) { fd = fopen(str, "a"); fprintf(fd, "%s\n",line); fclose(fd); } } /* *------------------------------------------------------------------- * * Password Callback -- * * Called when a password is needed for a private key when loading * or storing a PEM certificate with encryption. Evals callback * script and returns the result as the password string in buf. * * Results: * None * * Side effects: * Calls callback (if defined) * * Returns: * Password size in bytes or -1 for an error. * *------------------------------------------------------------------- */ static int PasswordCallback(char *buf, int size, int rwflag, void *udata) { State *statePtr = (State *) udata; Tcl_Interp *interp = statePtr->interp; Tcl_Obj *cmdPtr; int code; Tcl_Size len; dprintf("Called"); /* If no callback, use default callback */ if (statePtr->password == NULL) { if (Tcl_EvalEx(interp, "tls::password", -1, TCL_EVAL_GLOBAL) == TCL_OK) { char *ret = (char *) Tcl_GetStringFromObj(Tcl_GetObjResult(interp), &len); if (len > (Tcl_Size) size-1) { len = (Tcl_Size) size-1; } strncpy(buf, ret, (size_t) len); buf[len] = '\0'; return (int) len; } else { return -1; } } dprintf("PasswordCallback: create callback command"); /* Create command to eval with fn, rwflag, and size args */ cmdPtr = Tcl_DuplicateObj(statePtr->password); Tcl_ListObjAppendElement(interp, cmdPtr, Tcl_NewStringObj("password", -1)); Tcl_ListObjAppendElement(interp, cmdPtr, Tcl_NewIntObj(rwflag)); Tcl_ListObjAppendElement(interp, cmdPtr, Tcl_NewIntObj(size)); dprintf("PasswordCallback: eval callback"); Tcl_Preserve((ClientData) interp); Tcl_Preserve((ClientData) statePtr); /* Eval callback command */ Tcl_IncrRefCount(cmdPtr); code = Tcl_EvalObjEx(interp, cmdPtr, TCL_EVAL_GLOBAL); if (code != TCL_OK) { #if (TCL_MAJOR_VERSION == 8) && (TCL_MINOR_VERSION < 6) Tcl_BackgroundError(interp); #else Tcl_BackgroundException(interp, code); #endif } Tcl_DecrRefCount(cmdPtr); Tcl_Release((ClientData) statePtr); /* If successful, pass back password string and truncate if too long */ if (code == TCL_OK) { char *ret = (char *) Tcl_GetStringFromObj(Tcl_GetObjResult(interp), &len); if (len > (Tcl_Size) size-1) { len = (Tcl_Size) size-1; } strncpy(buf, ret, (size_t) len); buf[len] = '\0'; Tcl_Release((ClientData) interp); return (int) len; } Tcl_Release((ClientData) interp); return -1; } /* *------------------------------------------------------------------- * * Session Callback for Clients -- * * Called when a new session is added to the cache. In TLS 1.3 * this may be received multiple times after the handshake. For * earlier versions, this will be received during the handshake. * This is the preferred way to obtain a resumable session. * * Results: * None * * Side effects: * Calls callback (if defined) * * Return codes: * 0 = error where session will be immediately removed from the internal cache. * 1 = success where app retains session in session cache, and must call SSL_SESSION_free() when done. * *------------------------------------------------------------------- */ static int SessionCallback(SSL *ssl, SSL_SESSION *session) { State *statePtr = (State*)SSL_get_app_data((SSL *)ssl); Tcl_Interp *interp = statePtr->interp; Tcl_Obj *cmdPtr; const unsigned char *ticket; const unsigned char *session_id; size_t len2; unsigned int ulen; dprintf("Called"); if (statePtr->callback == (Tcl_Obj*)NULL) { return SSL_TLSEXT_ERR_OK; } else if (ssl == NULL) { return SSL_TLSEXT_ERR_NOACK; } /* Create command to eval with fn, chan, session id, session ticket, and lifetime args */ cmdPtr = Tcl_DuplicateObj(statePtr->callback); Tcl_ListObjAppendElement(interp, cmdPtr, Tcl_NewStringObj("session", -1)); Tcl_ListObjAppendElement(interp, cmdPtr, Tcl_NewStringObj(Tcl_GetChannelName(statePtr->self), -1)); /* Session id */ session_id = SSL_SESSION_get_id(session, &ulen); Tcl_ListObjAppendElement(interp, cmdPtr, Tcl_NewByteArrayObj(session_id, (Tcl_Size) ulen)); /* Session ticket */ SSL_SESSION_get0_ticket(session, &ticket, &len2); Tcl_ListObjAppendElement(interp, cmdPtr, Tcl_NewByteArrayObj(ticket, (Tcl_Size) len2)); /* Lifetime - number of seconds */ Tcl_ListObjAppendElement(interp, cmdPtr, Tcl_NewLongObj((long) SSL_SESSION_get_ticket_lifetime_hint(session))); /* Eval callback command */ Tcl_IncrRefCount(cmdPtr); EvalCallback(interp, statePtr, cmdPtr); Tcl_DecrRefCount(cmdPtr); /* Return 0 for now until session handling is complete */ return 0; } /* *------------------------------------------------------------------- * * ALPN Callback for Servers and NPN Callback for Clients -- * * Perform protocol (http/1.1, h2, h3, etc.) selection for the * incoming connection. Called after Hello and server callbacks. * Where 'out' is selected protocol and 'in' is the peer advertised list. * * Results: * None * * Side effects: * Calls callback (if defined) * * Return codes: * SSL_TLSEXT_ERR_OK: ALPN protocol selected. The connection continues. * SSL_TLSEXT_ERR_ALERT_FATAL: There was no overlap between the client's * supplied list and the server configuration. The connection will be aborted. * SSL_TLSEXT_ERR_NOACK: ALPN protocol not selected, e.g., because no ALPN * protocols are configured for this connection. The connection continues. * *------------------------------------------------------------------- */ static int ALPNCallback(SSL *ssl, const unsigned char **out, unsigned char *outlen, const unsigned char *in, unsigned int inlen, void *arg) { State *statePtr = (State*)arg; Tcl_Interp *interp = statePtr->interp; Tcl_Obj *cmdPtr; int code, res; dprintf("Called"); if (ssl == NULL || arg == NULL) { return SSL_TLSEXT_ERR_NOACK; } /* Select protocol */ if (SSL_select_next_proto((unsigned char **) out, outlen, statePtr->protos, statePtr->protos_len, in, inlen) == OPENSSL_NPN_NEGOTIATED) { /* Match found */ res = SSL_TLSEXT_ERR_OK; } else { /* OPENSSL_NPN_NO_OVERLAP = No overlap, so use first item from client protocol list */ res = SSL_TLSEXT_ERR_NOACK; } if (statePtr->vcmd == (Tcl_Obj*)NULL) { return res; } /* Create command to eval with fn, chan, depth, cert info list, status, and error args */ cmdPtr = Tcl_DuplicateObj(statePtr->vcmd); Tcl_ListObjAppendElement(interp, cmdPtr, Tcl_NewStringObj("alpn", -1)); Tcl_ListObjAppendElement(interp, cmdPtr, Tcl_NewStringObj(Tcl_GetChannelName(statePtr->self), -1)); Tcl_ListObjAppendElement(interp, cmdPtr, Tcl_NewStringObj((const char *) *out, -1)); Tcl_ListObjAppendElement(interp, cmdPtr, Tcl_NewBooleanObj(res == SSL_TLSEXT_ERR_OK)); /* Eval callback command */ Tcl_IncrRefCount(cmdPtr); if ((code = EvalCallback(interp, statePtr, cmdPtr)) > 1) { res = SSL_TLSEXT_ERR_NOACK; } else if (code == 1) { res = SSL_TLSEXT_ERR_OK; } else { res = SSL_TLSEXT_ERR_ALERT_FATAL; } Tcl_DecrRefCount(cmdPtr); return res; } /* *------------------------------------------------------------------- * * Advertise Protocols Callback for Next Protocol Negotiation (NPN) in ServerHello -- * * called when a TLS server needs a list of supported protocols for Next * Protocol Negotiation. * * Results: * None * * Side effects: * * Return codes: * SSL_TLSEXT_ERR_OK: NPN protocol selected. The connection continues. * SSL_TLSEXT_ERR_NOACK: NPN protocol not selected. The connection continues. * *------------------------------------------------------------------- */ #ifdef USE_NPN static int NPNCallback(const SSL *ssl, const unsigned char **out, unsigned int *outlen, void *arg) { State *statePtr = (State*)arg; dprintf("Called"); if (ssl == NULL || arg == NULL) { return SSL_TLSEXT_ERR_NOACK; } /* Set protocols list */ if (statePtr->protos != NULL) { *out = statePtr->protos; *outlen = statePtr->protos_len; } else { *out = NULL; *outlen = 0; return SSL_TLSEXT_ERR_NOACK; } return SSL_TLSEXT_ERR_OK; } #endif /* *------------------------------------------------------------------- * * SNI Callback for Servers -- * * Perform server-side SNI hostname selection after receiving SNI extension * in Client Hello. Called after hello callback but before ALPN callback. * * Results: * None * * Side effects: * Calls callback (if defined) * * Return codes: * SSL_TLSEXT_ERR_OK: SNI hostname is accepted. The connection continues. * SSL_TLSEXT_ERR_ALERT_FATAL: SNI hostname is not accepted. The connection * is aborted. Default for alert is SSL_AD_UNRECOGNIZED_NAME. * SSL_TLSEXT_ERR_ALERT_WARNING: SNI hostname is not accepted, warning alert * sent (not supported in TLSv1.3). The connection continues. * SSL_TLSEXT_ERR_NOACK: SNI hostname is not accepted and not acknowledged, * e.g. if SNI has not been configured. The connection continues. * *------------------------------------------------------------------- */ static int SNICallback(const SSL *ssl, int *alert, void *arg) { State *statePtr = (State*)arg; Tcl_Interp *interp = statePtr->interp; Tcl_Obj *cmdPtr; int code, res; const char *servername = NULL; dprintf("Called"); if (ssl == NULL || arg == NULL) { return SSL_TLSEXT_ERR_NOACK; } /* Only works for TLS 1.2 and earlier */ servername = SSL_get_servername(ssl, TLSEXT_NAMETYPE_host_name); if (!servername || servername[0] == '\0') { return SSL_TLSEXT_ERR_NOACK; } if (statePtr->vcmd == (Tcl_Obj*)NULL) { return SSL_TLSEXT_ERR_OK; } /* Create command to eval with fn, chan, and server name args */ cmdPtr = Tcl_DuplicateObj(statePtr->vcmd); Tcl_ListObjAppendElement(interp, cmdPtr, Tcl_NewStringObj("sni", -1)); Tcl_ListObjAppendElement(interp, cmdPtr, Tcl_NewStringObj(Tcl_GetChannelName(statePtr->self), -1)); Tcl_ListObjAppendElement(interp, cmdPtr, Tcl_NewStringObj(servername , -1)); /* Eval callback command */ Tcl_IncrRefCount(cmdPtr); if ((code = EvalCallback(interp, statePtr, cmdPtr)) > 1) { res = SSL_TLSEXT_ERR_ALERT_WARNING; *alert = SSL_AD_UNRECOGNIZED_NAME; /* Not supported by TLS 1.3 */ } else if (code == 1) { res = SSL_TLSEXT_ERR_OK; } else { res = SSL_TLSEXT_ERR_ALERT_FATAL; *alert = SSL_AD_UNRECOGNIZED_NAME; /* Not supported by TLS 1.3 */ } Tcl_DecrRefCount(cmdPtr); return res; } /* *------------------------------------------------------------------- * * ClientHello Handshake Callback for Servers -- * * Used by server to examine the server name indication (SNI) extension * provided by the client in order to select an appropriate certificate to * present, and make other configuration adjustments relevant to that server * name and its configuration. This includes swapping out the associated * SSL_CTX pointer, modifying the server's list of permitted TLS versions, * changing the server's cipher list in response to the client's cipher list, etc. * Called before SNI and ALPN callbacks. * * Results: * None * * Side effects: * Calls callback (if defined) * * Return codes: * SSL_CLIENT_HELLO_RETRY: suspend the handshake, and the handshake function will return immediately * SSL_CLIENT_HELLO_ERROR: failure, terminate connection. Set alert to error code. * SSL_CLIENT_HELLO_SUCCESS: success * *------------------------------------------------------------------- */ static int HelloCallback(SSL *ssl, int *alert, void *arg) { State *statePtr = (State*)arg; Tcl_Interp *interp = statePtr->interp; Tcl_Obj *cmdPtr; int code, res; const char *servername; const unsigned char *p; size_t len, remaining; dprintf("Called"); if (statePtr->vcmd == (Tcl_Obj*)NULL) { return SSL_CLIENT_HELLO_SUCCESS; } else if (ssl == (const SSL *)NULL || arg == (void *)NULL) { return SSL_CLIENT_HELLO_ERROR; } /* Get names */ if (!SSL_client_hello_get0_ext(ssl, TLSEXT_TYPE_server_name, &p, &remaining) || remaining <= 2) { *alert = SSL_R_SSLV3_ALERT_ILLEGAL_PARAMETER; return SSL_CLIENT_HELLO_ERROR; } /* Extract the length of the supplied list of names. */ len = (*(p++) << 8); len += *(p++); if (len + 2 != remaining) { *alert = SSL_R_SSLV3_ALERT_ILLEGAL_PARAMETER; return SSL_CLIENT_HELLO_ERROR; } remaining = len; /* The list in practice only has a single element, so we only consider the first one. */ if (remaining == 0 || *p++ != TLSEXT_NAMETYPE_host_name) { *alert = SSL_R_TLSV1_ALERT_INTERNAL_ERROR; return SSL_CLIENT_HELLO_ERROR; } remaining--; /* Now we can finally pull out the byte array with the actual hostname. */ if (remaining <= 2) { *alert = SSL_R_TLSV1_ALERT_INTERNAL_ERROR; return SSL_CLIENT_HELLO_ERROR; } len = (*(p++) << 8); len += *(p++); if (len + 2 > remaining) { *alert = SSL_R_TLSV1_ALERT_INTERNAL_ERROR; return SSL_CLIENT_HELLO_ERROR; } remaining = len; servername = (const char *)p; /* Create command to eval with fn, chan, and server name args */ cmdPtr = Tcl_DuplicateObj(statePtr->vcmd); Tcl_ListObjAppendElement(interp, cmdPtr, Tcl_NewStringObj("hello", -1)); Tcl_ListObjAppendElement(interp, cmdPtr, Tcl_NewStringObj(Tcl_GetChannelName(statePtr->self), -1)); Tcl_ListObjAppendElement(interp, cmdPtr, Tcl_NewStringObj(servername, (Tcl_Size) len)); /* Eval callback command */ Tcl_IncrRefCount(cmdPtr); if ((code = EvalCallback(interp, statePtr, cmdPtr)) > 1) { res = SSL_CLIENT_HELLO_RETRY; *alert = SSL_R_TLSV1_ALERT_USER_CANCELLED; } else if (code == 1) { res = SSL_CLIENT_HELLO_SUCCESS; } else { res = SSL_CLIENT_HELLO_ERROR; *alert = SSL_R_TLSV1_ALERT_INTERNAL_ERROR; } Tcl_DecrRefCount(cmdPtr); return res; } /********************/ /* Commands */ /********************/ /* *------------------------------------------------------------------- * * CiphersObjCmd -- list available ciphers * * This procedure is invoked to process the "tls::ciphers" command * to list available ciphers, based upon protocol selected. * * Results: * A standard Tcl result list. * * Side effects: * constructs and destroys SSL context (CTX) * *------------------------------------------------------------------- */ static const char *protocols[] = { "ssl2", "ssl3", "tls1", "tls1.1", "tls1.2", "tls1.3", NULL }; enum protocol { TLS_SSL2, TLS_SSL3, TLS_TLS1, TLS_TLS1_1, TLS_TLS1_2, TLS_TLS1_3, TLS_NONE }; static int CiphersObjCmd(ClientData clientData, Tcl_Interp *interp, int objc, Tcl_Obj *const objv[]) { Tcl_Obj *objPtr = NULL; SSL_CTX *ctx = NULL; SSL *ssl = NULL; STACK_OF(SSL_CIPHER) *sk; char buf[BUFSIZ]; Tcl_Size index; int verbose = 0, use_supported = 0; const SSL_METHOD *method; (void) clientData; dprintf("Called"); if ((objc < 2) || (objc > 4)) { Tcl_WrongNumArgs(interp, 1, objv, "protocol ?verbose? ?supported?"); return TCL_ERROR; } if (Tcl_GetIndexFromObj(interp, objv[1], protocols, "protocol", 0, &index) != TCL_OK) { return TCL_ERROR; } if ((objc > 2) && Tcl_GetBooleanFromObj(interp, objv[2], &verbose) != TCL_OK) { return TCL_ERROR; } if ((objc > 3) && Tcl_GetBooleanFromObj(interp, objv[3], &use_supported) != TCL_OK) { return TCL_ERROR; } ERR_clear_error(); switch ((enum protocol)index) { case TLS_SSL2: #if OPENSSL_VERSION_NUMBER >= 0x10100000L || defined(NO_SSL2) || defined(OPENSSL_NO_SSL2) Tcl_AppendResult(interp, protocols[index], ": protocol not supported", (char *) NULL); return TCL_ERROR; #else method = SSLv2_method(); break; #endif case TLS_SSL3: #if defined(NO_SSL3) || defined(OPENSSL_NO_SSL3) || defined(OPENSSL_NO_SSL3_METHOD) Tcl_AppendResult(interp, protocols[index], ": protocol not supported", (char *) NULL); return TCL_ERROR; #else method = SSLv3_method(); break; #endif case TLS_TLS1: #if defined(NO_TLS1) || defined(OPENSSL_NO_TLS1) || defined(OPENSSL_NO_TLS1_METHOD) Tcl_AppendResult(interp, protocols[index], ": protocol not supported", (char *) NULL); return TCL_ERROR; #else method = TLSv1_method(); break; #endif case TLS_TLS1_1: #if defined(NO_TLS1_1) || defined(OPENSSL_NO_TLS1_1) || defined(OPENSSL_NO_TLS1_1_METHOD) Tcl_AppendResult(interp, protocols[index], ": protocol not supported", (char *) NULL); return TCL_ERROR; #else method = TLSv1_1_method(); break; #endif case TLS_TLS1_2: #if defined(NO_TLS1_2) || defined(OPENSSL_NO_TLS1_2) || defined(OPENSSL_NO_TLS1_2_METHOD) Tcl_AppendResult(interp, protocols[index], ": protocol not supported", (char *) NULL); return TCL_ERROR; #else method = TLSv1_2_method(); break; #endif case TLS_TLS1_3: #if defined(NO_TLS1_3) || defined(OPENSSL_NO_TLS1_3) Tcl_AppendResult(interp, protocols[index], ": protocol not supported", (char *) NULL); return TCL_ERROR; #else method = TLS_method(); SSL_CTX_set_min_proto_version(ctx, TLS1_3_VERSION); SSL_CTX_set_max_proto_version(ctx, TLS1_3_VERSION); break; #endif default: method = TLS_method(); break; } ctx = SSL_CTX_new(method); if (ctx == NULL) { Tcl_AppendResult(interp, GET_ERR_REASON(), (char *) NULL); return TCL_ERROR; } ssl = SSL_new(ctx); if (ssl == NULL) { Tcl_AppendResult(interp, GET_ERR_REASON(), (char *) NULL); SSL_CTX_free(ctx); return TCL_ERROR; } /* Use list and order as would be sent in a ClientHello or all available ciphers */ if (use_supported) { sk = SSL_get1_supported_ciphers(ssl); } else { sk = SSL_get_ciphers(ssl); } if (sk != NULL) { if (!verbose) { const char *cp; objPtr = Tcl_NewListObj(0, NULL); for (int i = 0; i < sk_SSL_CIPHER_num(sk); i++) { const SSL_CIPHER *c = sk_SSL_CIPHER_value(sk, i); if (c == NULL) continue; /* cipher name or (NONE) */ cp = SSL_CIPHER_get_name(c); if (cp == NULL) break; Tcl_ListObjAppendElement(interp, objPtr, Tcl_NewStringObj((char *) cp, -1)); } } else { objPtr = Tcl_NewStringObj("",0); for (int i = 0; i < sk_SSL_CIPHER_num(sk); i++) { const SSL_CIPHER *c = sk_SSL_CIPHER_value(sk, i); if (c == NULL) continue; /* textual description of the cipher */ if (SSL_CIPHER_description(c, buf, sizeof(buf)) != NULL) { Tcl_AppendToObj(objPtr, buf, (Tcl_Size) strlen(buf)); } else { Tcl_AppendToObj(objPtr, "UNKNOWN\n", 8); } } } if (use_supported) { sk_SSL_CIPHER_free(sk); } } SSL_free(ssl); SSL_CTX_free(ctx); Tcl_SetObjResult(interp, objPtr); return TCL_OK; } /* *------------------------------------------------------------------- * * ProtocolsObjCmd -- list available protocols * * This procedure is invoked to process the "tls::protocols" command * to list available protocols. * * Results: * A standard Tcl result list. * * Side effects: * none * *------------------------------------------------------------------- */ static int ProtocolsObjCmd(ClientData clientData, Tcl_Interp *interp, int objc, Tcl_Obj *const objv[]) { Tcl_Obj *objPtr; (void) clientData; dprintf("Called"); if (objc != 1) { Tcl_WrongNumArgs(interp, 1, objv, ""); return TCL_ERROR; } ERR_clear_error(); objPtr = Tcl_NewListObj(0, NULL); #if OPENSSL_VERSION_NUMBER < 0x10100000L && !defined(NO_SSL2) && !defined(OPENSSL_NO_SSL2) Tcl_ListObjAppendElement(interp, objPtr, Tcl_NewStringObj(protocols[TLS_SSL2], -1)); #endif #if !defined(NO_SSL3) && !defined(OPENSSL_NO_SSL3) && !defined(OPENSSL_NO_SSL3_METHOD) Tcl_ListObjAppendElement(interp, objPtr, Tcl_NewStringObj(protocols[TLS_SSL3], -1)); #endif #if !defined(NO_TLS1) && !defined(OPENSSL_NO_TLS1) && !defined(OPENSSL_NO_TLS1_METHOD) Tcl_ListObjAppendElement(interp, objPtr, Tcl_NewStringObj(protocols[TLS_TLS1], -1)); #endif #if !defined(NO_TLS1_1) && !defined(OPENSSL_NO_TLS1_1) && !defined(OPENSSL_NO_TLS1_1_METHOD) Tcl_ListObjAppendElement(interp, objPtr, Tcl_NewStringObj(protocols[TLS_TLS1_1], -1)); #endif #if !defined(NO_TLS1_2) && !defined(OPENSSL_NO_TLS1_2) && !defined(OPENSSL_NO_TLS1_2_METHOD) Tcl_ListObjAppendElement(interp, objPtr, Tcl_NewStringObj(protocols[TLS_TLS1_2], -1)); #endif #if !defined(NO_TLS1_3) && !defined(OPENSSL_NO_TLS1_3) Tcl_ListObjAppendElement(interp, objPtr, Tcl_NewStringObj(protocols[TLS_TLS1_3], -1)); #endif Tcl_SetObjResult(interp, objPtr); return TCL_OK; } /* *------------------------------------------------------------------- * * HandshakeObjCmd -- * * This command is used to verify whether the handshake is complete * or not. * * Results: * A standard Tcl result. 1 means handshake complete, 0 means pending. * * Side effects: * May force SSL negotiation to take place. * *------------------------------------------------------------------- */ static int HandshakeObjCmd(ClientData clientData, Tcl_Interp *interp, int objc, Tcl_Obj *const objv[]) { Tcl_Channel chan; /* The channel to set a mode on. */ State *statePtr; /* client state for ssl socket */ const char *errStr = NULL; int ret = 1; int err = 0; (void) clientData; dprintf("Called"); if (objc != 2) { Tcl_WrongNumArgs(interp, 1, objv, "channel"); return TCL_ERROR; } ERR_clear_error(); chan = Tcl_GetChannel(interp, Tcl_GetString(objv[1]), NULL); if (chan == (Tcl_Channel) NULL) { return TCL_ERROR; } /* Make sure to operate on the topmost channel */ chan = Tcl_GetTopChannel(chan); if (Tcl_GetChannelType(chan) != Tls_ChannelType()) { Tcl_AppendResult(interp, "bad channel \"", Tcl_GetChannelName(chan), "\": not a TLS channel", (char *) NULL); Tcl_SetErrorCode(interp, "TLS", "HANDSHAKE", "CHANNEL", "INVALID", (char *) NULL); return TCL_ERROR; } statePtr = (State *)Tcl_GetChannelInstanceData(chan); dprintf("Calling Tls_WaitForConnect"); ret = Tls_WaitForConnect(statePtr, &err, 1); dprintf("Tls_WaitForConnect returned: %i", ret); if (ret < 0 && ((statePtr->flags & TLS_TCL_ASYNC) && (err == EAGAIN))) { dprintf("Async set and err = EAGAIN"); ret = 0; } else if (ret < 0) { long result; errStr = statePtr->err; Tcl_ResetResult(interp); Tcl_SetErrno(err); if (!errStr || (*errStr == 0)) { errStr = Tcl_PosixError(interp); } Tcl_AppendResult(interp, "handshake failed: ", errStr, (char *) NULL); if ((result = SSL_get_verify_result(statePtr->ssl)) != X509_V_OK) { Tcl_AppendResult(interp, " due to \"", X509_verify_cert_error_string(result), "\"", (char *) NULL); } Tcl_SetErrorCode(interp, "TLS", "HANDSHAKE", "FAILED", (char *) NULL); dprintf("Returning TCL_ERROR with handshake failed: %s", errStr); return TCL_ERROR; } else { if (err != 0) { dprintf("Got an error with a completed handshake: err = %i", err); } ret = 1; } dprintf("Returning TCL_OK with data \"%i\"", ret); Tcl_SetObjResult(interp, Tcl_NewIntObj(ret)); return TCL_OK; } /* *------------------------------------------------------------------- * * ImportObjCmd -- * * This procedure is invoked to process the "ssl" command * * The ssl command pushes SSL over a (newly connected) tcp socket * * Results: * A standard Tcl result. * * Side effects: * May modify the behavior of an IO channel. * *------------------------------------------------------------------- */ static int ImportObjCmd(ClientData clientData, Tcl_Interp *interp, int objc, Tcl_Obj *const objv[]) { Tcl_Channel chan; /* The channel to set a mode on. */ State *statePtr; /* client state for ssl socket */ SSL_CTX *ctx = NULL; Tcl_Obj *script = NULL; Tcl_Obj *password = NULL; Tcl_Obj *vcmd = NULL; Tcl_DString upperChannelTranslation, upperChannelBlocking, upperChannelEncoding, upperChannelEOFChar; int idx; Tcl_Size len; int flags = TLS_TCL_INIT; int server = 0; /* is connection incoming or outgoing? */ char *keyfile = NULL; char *certfile = NULL; unsigned char *key = NULL; Tcl_Size key_len = 0; unsigned char *cert = NULL; Tcl_Size cert_len = 0; char *ciphers = NULL; char *ciphersuites = NULL; char *CAfile = NULL; char *CApath = NULL; char *CAstore = NULL; char *DHparams = NULL; char *model = NULL; char *servername = NULL; /* hostname for Server Name Indication */ char *session_id = NULL; Tcl_Obj *alpn = NULL; int ssl2 = 0, ssl3 = 0; int tls1 = 1, tls1_1 = 1, tls1_2 = 1, tls1_3 = 1; int proto = 0, level = -1; int verify = 0, require = 0, request = 1, post_handshake = 0; (void) clientData; dprintf("Called"); #if defined(NO_TLS1) || defined(OPENSSL_NO_TLS1) tls1 = 0; #endif #if defined(NO_TLS1_1) || defined(OPENSSL_NO_TLS1_1) tls1_1 = 0; #endif #if defined(NO_TLS1_2) || defined(OPENSSL_NO_TLS1_2) tls1_2 = 0; #endif #if defined(NO_TLS1_3) || defined(OPENSSL_NO_TLS1_3) tls1_3 = 0; #endif if (objc < 2) { Tcl_WrongNumArgs(interp, 1, objv, "channel ?options?"); return TCL_ERROR; } ERR_clear_error(); chan = Tcl_GetChannel(interp, Tcl_GetString(objv[1]), NULL); if (chan == (Tcl_Channel) NULL) { return TCL_ERROR; } /* Make sure to operate on the topmost channel */ chan = Tcl_GetTopChannel(chan); for (idx = 2; idx < objc; idx++) { char *opt = Tcl_GetString(objv[idx]); if (opt[0] != '-') break; OPTOBJ("-alpn", alpn); OPTSTR("-cadir", CApath); OPTSTR("-cafile", CAfile); OPTSTR("-castore", CAstore); OPTBYTE("-cert", cert, cert_len); OPTSTR("-certfile", certfile); OPTSTR("-cipher", ciphers); OPTSTR("-ciphers", ciphers); OPTSTR("-ciphersuites", ciphersuites); OPTOBJ("-command", script); OPTSTR("-dhparams", DHparams); OPTBYTE("-key", key, key_len); OPTSTR("-keyfile", keyfile); OPTSTR("-model", model); OPTOBJ("-password", password); OPTBOOL("-post_handshake", post_handshake); OPTBOOL("-request", request); OPTBOOL("-require", require); OPTINT("-security_level", level); OPTBOOL("-server", server); OPTSTR("-servername", servername); OPTSTR("-session_id", session_id); OPTBOOL("-ssl2", ssl2); OPTBOOL("-ssl3", ssl3); OPTBOOL("-tls1", tls1); OPTBOOL("-tls1.1", tls1_1); OPTBOOL("-tls1.2", tls1_2); OPTBOOL("-tls1.3", tls1_3); OPTOBJ("-validatecommand", vcmd); OPTOBJ("-vcmd", vcmd); OPTBAD("option", "-alpn, -cadir, -cafile, -castore, -cert, -certfile, -cipher, -ciphersuites, -command, -dhparams, -key, -keyfile, -model, -password, -post_handshake, -request, -require, -security_level, -server, -servername, -session_id, -ssl2, -ssl3, -tls1, -tls1.1, -tls1.2, -tls1.3, or -validatecommand"); return TCL_ERROR; } if (request) verify |= SSL_VERIFY_CLIENT_ONCE | SSL_VERIFY_PEER; if (request && require) verify |= SSL_VERIFY_FAIL_IF_NO_PEER_CERT; if (request && post_handshake) verify |= SSL_VERIFY_POST_HANDSHAKE; if (verify == 0) verify = SSL_VERIFY_NONE; proto |= (ssl2 ? TLS_PROTO_SSL2 : 0); proto |= (ssl3 ? TLS_PROTO_SSL3 : 0); proto |= (tls1 ? TLS_PROTO_TLS1 : 0); proto |= (tls1_1 ? TLS_PROTO_TLS1_1 : 0); proto |= (tls1_2 ? TLS_PROTO_TLS1_2 : 0); proto |= (tls1_3 ? TLS_PROTO_TLS1_3 : 0); /* reset to NULL if blank string provided */ if (cert && !*cert) cert = NULL; if (key && !*key) key = NULL; if (certfile && !*certfile) certfile = NULL; if (keyfile && !*keyfile) keyfile = NULL; if (ciphers && !*ciphers) ciphers = NULL; if (ciphersuites && !*ciphersuites) ciphersuites = NULL; if (CAfile && !*CAfile) CAfile = NULL; if (CApath && !*CApath) CApath = NULL; if (CAstore && !*CAstore) CAstore = NULL; if (DHparams && !*DHparams) DHparams = NULL; /* new SSL state */ statePtr = (State *) ckalloc((unsigned) sizeof(State)); memset(statePtr, 0, sizeof(State)); statePtr->flags = flags; statePtr->interp = interp; statePtr->want = 0; statePtr->vflags = verify; statePtr->err = ""; /* allocate script */ if (script) { (void) Tcl_GetStringFromObj(script, &len); if (len) { statePtr->callback = script; Tcl_IncrRefCount(statePtr->callback); } } /* allocate password */ if (password) { (void) Tcl_GetStringFromObj(password, &len); if (len) { statePtr->password = password; Tcl_IncrRefCount(statePtr->password); } } /* allocate validate command */ if (vcmd) { (void) Tcl_GetStringFromObj(vcmd, &len); if (len) { statePtr->vcmd = vcmd; Tcl_IncrRefCount(statePtr->vcmd); } } if (model != NULL) { int mode; /* Get the "model" context */ chan = Tcl_GetChannel(interp, model, &mode); if (chan == (Tcl_Channel) NULL) { Tls_Free((tls_free_type *) statePtr); return TCL_ERROR; } /* * Make sure to operate on the topmost channel */ chan = Tcl_GetTopChannel(chan); if (Tcl_GetChannelType(chan) != Tls_ChannelType()) { Tcl_AppendResult(interp, "bad channel \"", Tcl_GetChannelName(chan), "\": not a TLS channel", (char *) NULL); Tcl_SetErrorCode(interp, "TLS", "IMPORT", "CHANNEL", "INVALID", (char *) NULL); Tls_Free((tls_free_type *) statePtr); return TCL_ERROR; } ctx = ((State *)Tcl_GetChannelInstanceData(chan))->ctx; } else { if ((ctx = CTX_Init(statePtr, server, proto, keyfile, certfile, key, cert, key_len, cert_len, CApath, CAstore, CAfile, ciphers, ciphersuites, level, DHparams)) == NULL) { Tls_Free((tls_free_type *) statePtr); return TCL_ERROR; } } statePtr->ctx = ctx; /* Preserve channel config */ Tcl_DStringInit(&upperChannelTranslation); Tcl_DStringInit(&upperChannelBlocking); Tcl_DStringInit(&upperChannelEOFChar); Tcl_DStringInit(&upperChannelEncoding); Tcl_GetChannelOption(interp, chan, "-eofchar", &upperChannelEOFChar); Tcl_GetChannelOption(interp, chan, "-encoding", &upperChannelEncoding); Tcl_GetChannelOption(interp, chan, "-translation", &upperChannelTranslation); Tcl_GetChannelOption(interp, chan, "-blocking", &upperChannelBlocking); /* Ensure the channel works in binary mode (for the encryption not to get goofed up). */ Tcl_SetChannelOption(interp, chan, "-translation", "binary"); Tcl_SetChannelOption(interp, chan, "-blocking", "true"); /* Create stacked channel */ dprintf("Consuming Tcl channel %s", Tcl_GetChannelName(chan)); statePtr->self = Tcl_StackChannel(interp, Tls_ChannelType(), (ClientData) statePtr, (TCL_READABLE | TCL_WRITABLE), chan); dprintf("Created channel named %s", Tcl_GetChannelName(statePtr->self)); if (statePtr->self == (Tcl_Channel) NULL) { /* * No use of Tcl_EventuallyFree because no possible Tcl_Preserve. */ Tls_Free((tls_free_type *) statePtr); Tcl_DStringFree(&upperChannelTranslation); Tcl_DStringFree(&upperChannelEncoding); Tcl_DStringFree(&upperChannelEOFChar); Tcl_DStringFree(&upperChannelBlocking); return TCL_ERROR; } /* Restore channel config */ Tcl_SetChannelOption(interp, statePtr->self, "-translation", Tcl_DStringValue(&upperChannelTranslation)); Tcl_SetChannelOption(interp, statePtr->self, "-encoding", Tcl_DStringValue(&upperChannelEncoding)); Tcl_SetChannelOption(interp, statePtr->self, "-eofchar", Tcl_DStringValue(&upperChannelEOFChar)); Tcl_SetChannelOption(interp, statePtr->self, "-blocking", Tcl_DStringValue(&upperChannelBlocking)); Tcl_DStringFree(&upperChannelTranslation); Tcl_DStringFree(&upperChannelEncoding); Tcl_DStringFree(&upperChannelEOFChar); Tcl_DStringFree(&upperChannelBlocking); /* * SSL Initialization */ statePtr->ssl = SSL_new(statePtr->ctx); if (!statePtr->ssl) { /* SSL library error */ Tcl_AppendResult(interp, "couldn't construct ssl session: ", GET_ERR_REASON(), (char *) NULL); Tcl_SetErrorCode(interp, "TLS", "IMPORT", "INIT", "FAILED", (char *) NULL); Tls_Free((tls_free_type *) statePtr); return TCL_ERROR; } /* Set host server name */ if (servername) { /* Sets the server name indication (SNI) in ClientHello extension */ /* Per RFC 6066, hostname is a ASCII encoded string, though RFC 4366 says UTF-8. */ if (!SSL_set_tlsext_host_name(statePtr->ssl, servername) && require) { Tcl_AppendResult(interp, "Set SNI extension failed: ", GET_ERR_REASON(), (char *) NULL); Tcl_SetErrorCode(interp, "TLS", "IMPORT", "SNI", "FAILED", (char *) NULL); Tls_Free((tls_free_type *) statePtr); return TCL_ERROR; } /* Set hostname for peer certificate hostname verification in clients. Don't use SSL_set1_host since it has limitations. */ if (!SSL_add1_host(statePtr->ssl, servername)) { Tcl_AppendResult(interp, "Set DNS hostname failed: ", GET_ERR_REASON(), (char *) NULL); Tcl_SetErrorCode(interp, "TLS", "IMPORT", "HOSTNAME", "FAILED", (char *) NULL); Tls_Free((tls_free_type *) statePtr); return TCL_ERROR; } } /* Resume session id */ if (session_id && strlen(session_id) <= SSL_MAX_SID_CTX_LENGTH) { /* SSL_set_session() */ if (!SSL_SESSION_set1_id_context(SSL_get_session(statePtr->ssl), (const unsigned char *) session_id, (unsigned int) strlen(session_id))) { Tcl_AppendResult(interp, "Resume session failed: ", GET_ERR_REASON(), (char *) NULL); Tcl_SetErrorCode(interp, "TLS", "IMPORT", "SESSION", "FAILED", (char *) NULL); Tls_Free((tls_free_type *) statePtr); return TCL_ERROR; } } /* Enable Application-Layer Protocol Negotiation. Examples are: http/1.0, http/1.1, h2, h3, ftp, imap, pop3, xmpp-client, xmpp-server, mqtt, irc, etc. */ if (alpn) { /* Convert a TCL list into a protocol-list in wire-format */ unsigned char *protos, *p; unsigned int protos_len = 0; Tcl_Size cnt, i; int j; Tcl_Obj **list; if (Tcl_ListObjGetElements(interp, alpn, &cnt, &list) != TCL_OK) { Tls_Free((tls_free_type *) statePtr); return TCL_ERROR; } /* Determine the memory required for the protocol-list */ for (i = 0; i < cnt; i++) { Tcl_GetStringFromObj(list[i], &len); if (len > 255) { Tcl_AppendResult(interp, "ALPN protocol names too long", (char *) NULL); Tcl_SetErrorCode(interp, "TLS", "IMPORT", "ALPN", "FAILED", (char *) NULL); Tls_Free((tls_free_type *) statePtr); return TCL_ERROR; } protos_len += 1 + (int) len; } /* Build the complete protocol-list */ protos = ckalloc(protos_len); /* protocol-lists consist of 8-bit length-prefixed, byte strings */ for (j = 0, p = protos; j < cnt; j++) { char *str = Tcl_GetStringFromObj(list[j], &len); *p++ = (unsigned char) len; memcpy(p, str, (size_t) len); p += len; } /* SSL_set_alpn_protos makes a copy of the protocol-list */ /* Note: This function reverses the return value convention */ if (SSL_set_alpn_protos(statePtr->ssl, protos, protos_len)) { Tcl_AppendResult(interp, "Set ALPN protocols failed: ", GET_ERR_REASON(), (char *) NULL); Tcl_SetErrorCode(interp, "TLS", "IMPORT", "ALPN", "FAILED", (char *) NULL); Tls_Free((tls_free_type *) statePtr); ckfree(protos); return TCL_ERROR; } /* Store protocols list */ statePtr->protos = protos; statePtr->protos_len = protos_len; } else { statePtr->protos = NULL; statePtr->protos_len = 0; } /* * SSL Callbacks */ SSL_set_app_data(statePtr->ssl, (void *)statePtr); /* point back to us */ SSL_set_verify(statePtr->ssl, verify, VerifyCallback); /*SSL_set_verify_depth(SSL_set_verify_depth, 0);*/ SSL_set_info_callback(statePtr->ssl, InfoCallback); /* Callback for observing protocol messages */ #ifndef OPENSSL_NO_SSL_TRACE /* void SSL_CTX_set_msg_callback_arg(statePtr->ctx, (void *)statePtr); void SSL_CTX_set_msg_callback(statePtr->ctx, MessageCallback); */ SSL_set_msg_callback_arg(statePtr->ssl, (void *)statePtr); SSL_set_msg_callback(statePtr->ssl, MessageCallback); #endif /* Create Tcl_Channel BIO Handler */ statePtr->p_bio = BIO_new_tcl(statePtr, BIO_NOCLOSE); statePtr->bio = BIO_new(BIO_f_ssl()); if (server) { /* Server callbacks */ SSL_CTX_set_tlsext_servername_arg(statePtr->ctx, (void *)statePtr); SSL_CTX_set_tlsext_servername_callback(statePtr->ctx, SNICallback); SSL_CTX_set_client_hello_cb(statePtr->ctx, HelloCallback, (void *)statePtr); if (statePtr->protos != NULL) { SSL_CTX_set_alpn_select_cb(statePtr->ctx, ALPNCallback, (void *)statePtr); #ifdef USE_NPN if (tls1_2 == 0 && tls1_3 == 0) { SSL_CTX_set_next_protos_advertised_cb(statePtr->ctx, NPNCallback, (void *)statePtr); } #endif } /* Enable server to send cert request after handshake (TLS 1.3 only) */ /* A write operation must take place for the Certificate Request to be sent to the client, this can be done with SSL_do_handshake(). */ if (request && post_handshake && tls1_3) { SSL_verify_client_post_handshake(statePtr->ssl); } /* Set server mode */ statePtr->flags |= TLS_TCL_SERVER; SSL_set_accept_state(statePtr->ssl); } else { /* Client callbacks */ #ifdef USE_NPN if (statePtr->protos != NULL && tls1_2 == 0 && tls1_3 == 0) { SSL_CTX_set_next_proto_select_cb(statePtr->ctx, ALPNCallback, (void *)statePtr); } #endif /* Session caching */ SSL_CTX_set_session_cache_mode(statePtr->ctx, SSL_SESS_CACHE_CLIENT | SSL_SESS_CACHE_NO_INTERNAL_STORE); SSL_CTX_sess_set_new_cb(statePtr->ctx, SessionCallback); /* Enable post handshake Authentication extension. TLS 1.3 only, not http/2. */ if (request && post_handshake) { SSL_set_post_handshake_auth(statePtr->ssl, 1); } /* Set client mode */ SSL_set_connect_state(statePtr->ssl); } /* Set BIO for read and write operations on SSL object */ SSL_set_bio(statePtr->ssl, statePtr->p_bio, statePtr->p_bio); BIO_set_ssl(statePtr->bio, statePtr->ssl, BIO_NOCLOSE); BIO_set_ssl_mode(statePtr->bio, (long) !server); /* * End of SSL Init */ dprintf("Returning %s", Tcl_GetChannelName(statePtr->self)); Tcl_SetResult(interp, (char *) Tcl_GetChannelName(statePtr->self), TCL_VOLATILE); return TCL_OK; } /* *------------------------------------------------------------------- * * UnimportObjCmd -- * * This procedure is invoked to remove the topmost channel filter. * * Results: * A standard Tcl result. * * Side effects: * May modify the behavior of an IO channel. * *------------------------------------------------------------------- */ static int UnimportObjCmd(ClientData clientData, Tcl_Interp *interp, int objc, Tcl_Obj *const objv[]) { Tcl_Channel chan, parent; /* The stacked and underlying channels */ Tcl_DString upperChannelTranslation, upperChannelBlocking, upperChannelEncoding, upperChannelEOFChar; int res = TCL_OK; (void) clientData; dprintf("Called"); if (objc != 2) { Tcl_WrongNumArgs(interp, 1, objv, "channel"); return TCL_ERROR; } /* Validate channel name */ chan = Tcl_GetChannel(interp, Tcl_GetString(objv[1]), NULL); if (chan == (Tcl_Channel) NULL) { return TCL_ERROR; } /* Make sure to operate on the topmost channel */ chan = Tcl_GetTopChannel(chan); parent = Tcl_GetStackedChannel(chan); /* Verify is a stacked channel */ if (parent == NULL) { Tcl_AppendResult(interp, "bad channel \"", Tcl_GetChannelName(chan), "\": not a stacked channel", (char *) NULL); Tcl_SetErrorCode(interp, "TLS", "UNIMPORT", "CHANNEL", "INVALID", (char *) NULL); return TCL_ERROR; } /* Flush any pending data */ if (Tcl_OutputBuffered(chan) > 0 && Tcl_Flush(chan) != TCL_OK) { Tcl_AppendResult(interp, "can't flush channel", (char *) NULL); return TCL_ERROR; } /* Init storage */ Tcl_DStringInit(&upperChannelTranslation); Tcl_DStringInit(&upperChannelBlocking); Tcl_DStringInit(&upperChannelEOFChar); Tcl_DStringInit(&upperChannelEncoding); /* Preserve current channel config */ Tcl_GetChannelOption(interp, chan, "-blocking", &upperChannelBlocking); Tcl_GetChannelOption(interp, chan, "-encoding", &upperChannelEncoding); Tcl_GetChannelOption(interp, chan, "-eofchar", &upperChannelEOFChar); Tcl_GetChannelOption(interp, chan, "-translation", &upperChannelTranslation); /* Unstack the channel */ if (Tcl_UnstackChannel(interp, chan) != TCL_OK) { res = TCL_ERROR; } /* Restore channel config */ Tcl_SetChannelOption(interp, parent, "-encoding", Tcl_DStringValue(&upperChannelEncoding)); Tcl_SetChannelOption(interp, parent, "-eofchar", Tcl_DStringValue(&upperChannelEOFChar)); Tcl_SetChannelOption(interp, parent, "-translation", Tcl_DStringValue(&upperChannelTranslation)); Tcl_SetChannelOption(interp, parent, "-blocking", Tcl_DStringValue(&upperChannelBlocking)); /* Clean-up */ Tcl_DStringFree(&upperChannelTranslation); Tcl_DStringFree(&upperChannelEncoding); Tcl_DStringFree(&upperChannelEOFChar); Tcl_DStringFree(&upperChannelBlocking); return res; } /* *------------------------------------------------------------------- * * TlsLoadClientCAFileFromMemory -- Load certificates from a client * CA file from VFS into memory. * * Results: * Number of certificates loaded or 0 for none. * * Side effects: * Loads CA certificates * *------------------------------------------------------------------- */ static int TlsLoadClientCAFileFromMemory(Tcl_Interp *interp, SSL_CTX *ctx, Tcl_Obj *file) { BIO *bio = NULL; X509 *cert = NULL; X509_STORE *store = NULL; Tcl_Obj *buf = NULL; const void *data = NULL; X509_NAME *name = NULL; STACK_OF(X509_NAME) *certNames = NULL; int ret = 0; Tcl_Size len = 0; /* Read file into memory */ Tcl_Channel in = Tcl_FSOpenFileChannel(interp, file, "r", 0); if (in == NULL) { goto cleanup; } Tcl_SetChannelOption(interp, in, "-encoding", "binary"); buf = Tcl_NewObj(); Tcl_IncrRefCount(buf); if (Tcl_ReadChars(in, buf, -1, 0) < 0) { Tcl_Close(interp, in); goto cleanup; } Tcl_Close(interp, in); data = (const void *) Tcl_GetByteArrayFromObj(buf, &len); bio = BIO_new_mem_buf(data, len); if (bio == NULL) { goto cleanup; } /* Where the certs go */ store = SSL_CTX_get_cert_store(ctx); if (store == NULL) { store = X509_STORE_new(); if (store == NULL) { goto cleanup; } } /* Where the CA names go */ certNames = sk_X509_NAME_new_null(); if (!certNames) { goto cleanup; } /* Attempt to load all certs from the PEM file */ while ((cert = PEM_read_bio_X509(bio, NULL, 0, NULL)) != NULL) { if (X509_STORE_add_cert(store, cert) == 0) { X509_free(cert); ret = 0; goto cleanup; } /* Copy name to stack before certificate gets freed */ name = X509_get_subject_name(cert); if (name) { X509_NAME *name_copy = X509_NAME_dup(name); if (!name_copy || !sk_X509_NAME_push(certNames, name_copy)) { X509_free(cert); ret = 0; goto cleanup; } } X509_free(cert); ret ++; } /* At least one cert was added so retain the store and CA list */ if (ret) { if (SSL_CTX_get_cert_store(ctx) == NULL) { SSL_CTX_set_cert_store(ctx, store); } SSL_CTX_set_client_CA_list(ctx, certNames); } cleanup: if (! ret) { /* New store is not required */ if (store != SSL_CTX_get_cert_store(ctx)) { X509_STORE_free(store); } /* Cert names will not be used */ if (certNames) { sk_X509_NAME_pop_free(certNames, X509_NAME_free); } } BIO_free(bio); if (buf) Tcl_DecrRefCount(buf); return ret; } /* *------------------------------------------------------------------- * * CTX_Init -- construct a SSL_CTX instance * * Results: * A valid SSL_CTX instance or NULL. * * Side effects: * constructs SSL context (CTX) * *------------------------------------------------------------------- */ static SSL_CTX * CTX_Init(State *statePtr, int isServer, int proto, char *keyfile, char *certfile, unsigned char *key, unsigned char *cert, Tcl_Size key_len, Tcl_Size cert_len, char *CApath, char *CAstore, char *CAfile, char *ciphers, char *ciphersuites, int level, char *DHparams) { Tcl_Interp *interp = statePtr->interp; SSL_CTX *ctx = NULL; Tcl_DString ds; int off = 0, abort = 0; int load_private_key; const SSL_METHOD *method; dprintf("Called"); if (!proto) { Tcl_AppendResult(interp, "no valid protocol selected", (char *) NULL); return NULL; } /* create SSL context */ #if OPENSSL_VERSION_NUMBER >= 0x10100000L || defined(NO_SSL2) || defined(OPENSSL_NO_SSL2) if (ENABLED(proto, TLS_PROTO_SSL2)) { Tcl_AppendResult(interp, "SSL2 protocol not supported", (char *) NULL); return NULL; } #endif #if defined(NO_SSL3) || defined(OPENSSL_NO_SSL3) if (ENABLED(proto, TLS_PROTO_SSL3)) { Tcl_AppendResult(interp, "SSL3 protocol not supported", (char *) NULL); return NULL; } #endif #if defined(NO_TLS1) || defined(OPENSSL_NO_TLS1) if (ENABLED(proto, TLS_PROTO_TLS1)) { Tcl_AppendResult(interp, "TLS 1.0 protocol not supported", (char *) NULL); return NULL; } #endif #if defined(NO_TLS1_1) || defined(OPENSSL_NO_TLS1_1) if (ENABLED(proto, TLS_PROTO_TLS1_1)) { Tcl_AppendResult(interp, "TLS 1.1 protocol not supported", (char *) NULL); return NULL; } #endif #if defined(NO_TLS1_2) || defined(OPENSSL_NO_TLS1_2) if (ENABLED(proto, TLS_PROTO_TLS1_2)) { Tcl_AppendResult(interp, "TLS 1.2 protocol not supported", (char *) NULL); return NULL; } #endif #if defined(NO_TLS1_3) || defined(OPENSSL_NO_TLS1_3) if (ENABLED(proto, TLS_PROTO_TLS1_3)) { Tcl_AppendResult(interp, "TLS 1.3 protocol not supported", (char *) NULL); return NULL; } #endif if (proto == 0) { /* Use full range */ SSL_CTX_set_min_proto_version(ctx, 0); SSL_CTX_set_max_proto_version(ctx, 0); } switch (proto) { #if OPENSSL_VERSION_NUMBER < 0x10100000L && !defined(NO_SSL2) && !defined(OPENSSL_NO_SSL2) case TLS_PROTO_SSL2: method = isServer ? SSLv2_server_method() : SSLv2_client_method(); break; #endif #if !defined(NO_SSL3) && !defined(OPENSSL_NO_SSL3) && !defined(OPENSSL_NO_SSL3_METHOD) case TLS_PROTO_SSL3: method = isServer ? SSLv3_server_method() : SSLv3_client_method(); break; #endif #if !defined(NO_TLS1) && !defined(OPENSSL_NO_TLS1) && !defined(OPENSSL_NO_TLS1_METHOD) case TLS_PROTO_TLS1: method = isServer ? TLSv1_server_method() : TLSv1_client_method(); break; #endif #if !defined(NO_TLS1_1) && !defined(OPENSSL_NO_TLS1_1) && !defined(OPENSSL_NO_TLS1_1_METHOD) case TLS_PROTO_TLS1_1: method = isServer ? TLSv1_1_server_method() : TLSv1_1_client_method(); break; #endif #if !defined(NO_TLS1_2) && !defined(OPENSSL_NO_TLS1_2) && !defined(OPENSSL_NO_TLS1_2_METHOD) case TLS_PROTO_TLS1_2: method = isServer ? TLSv1_2_server_method() : TLSv1_2_client_method(); break; #endif #if !defined(NO_TLS1_3) && !defined(OPENSSL_NO_TLS1_3) case TLS_PROTO_TLS1_3: /* Use the generic method and constraint range after context is created */ method = isServer ? TLS_server_method() : TLS_client_method(); break; #endif default: /* Negotiate highest available SSL/TLS version */ method = isServer ? TLS_server_method() : TLS_client_method(); #if OPENSSL_VERSION_NUMBER < 0x10100000L && !defined(NO_SSL2) && !defined(OPENSSL_NO_SSL2) off |= (ENABLED(proto, TLS_PROTO_SSL2) ? 0 : SSL_OP_NO_SSLv2); #endif #if !defined(NO_SSL3) && !defined(OPENSSL_NO_SSL3) off |= (ENABLED(proto, TLS_PROTO_SSL3) ? 0 : SSL_OP_NO_SSLv3); #endif #if !defined(NO_TLS1) && !defined(OPENSSL_NO_TLS1) off |= (ENABLED(proto, TLS_PROTO_TLS1) ? 0 : SSL_OP_NO_TLSv1); #endif #if !defined(NO_TLS1_1) && !defined(OPENSSL_NO_TLS1_1) off |= (ENABLED(proto, TLS_PROTO_TLS1_1) ? 0 : SSL_OP_NO_TLSv1_1); #endif #if !defined(NO_TLS1_2) && !defined(OPENSSL_NO_TLS1_2) off |= (ENABLED(proto, TLS_PROTO_TLS1_2) ? 0 : SSL_OP_NO_TLSv1_2); #endif #if !defined(NO_TLS1_3) && !defined(OPENSSL_NO_TLS1_3) off |= (ENABLED(proto, TLS_PROTO_TLS1_3) ? 0 : SSL_OP_NO_TLSv1_3); #endif break; } ERR_clear_error(); ctx = SSL_CTX_new(method); if (!ctx) { return NULL; } if (getenv(SSLKEYLOGFILE)) { SSL_CTX_set_keylog_callback(ctx, KeyLogCallback); } #if !defined(NO_TLS1_3) && !defined(OPENSSL_NO_TLS1_3) if (proto == TLS_PROTO_TLS1_3) { SSL_CTX_set_min_proto_version(ctx, TLS1_3_VERSION); SSL_CTX_set_max_proto_version(ctx, TLS1_3_VERSION); } #endif /* Force cipher selection order by server */ if (!isServer) { SSL_CTX_set_options(ctx, SSL_OP_CIPHER_SERVER_PREFERENCE); } #if OPENSSL_VERSION_NUMBER < 0x10100000L OpenSSL_add_all_algorithms(); /* Load ciphers and digests */ #endif SSL_CTX_set_app_data(ctx, (void*)interp); /* remember the interpreter */ SSL_CTX_set_options(ctx, SSL_OP_ALL); /* Enable all SSL bug workarounds */ SSL_CTX_set_options(ctx, SSL_OP_NO_COMPRESSION); /* Disable compression even if supported */ SSL_CTX_set_options(ctx, off); /* Disable specified protocol versions */ /* Allow writes to report success when less than all records have been written */ SSL_CTX_set_mode(ctx, SSL_MODE_ENABLE_PARTIAL_WRITE); /* Disable attempts to try to process the next record instead of returning after a non-app record. Avoids hangs in blocking mode, when using SSL_read() and a non-application record was sent without any application data. */ /*SSL_CTX_clear_mode(ctx, SSL_MODE_AUTO_RETRY);*/ SSL_CTX_sess_set_cache_size(ctx, 128); /* Set user defined ciphers, cipher suites, and security level */ if ((ciphers != NULL) && !SSL_CTX_set_cipher_list(ctx, ciphers)) { Tcl_AppendResult(interp, "Set ciphers failed: No valid ciphers", (char *) NULL); SSL_CTX_free(ctx); return NULL; } if ((ciphersuites != NULL) && !SSL_CTX_set_ciphersuites(ctx, ciphersuites)) { Tcl_AppendResult(interp, "Set cipher suites failed: No valid ciphers", (char *) NULL); SSL_CTX_free(ctx); return NULL; } /* set automatic curve selection */ SSL_CTX_set_ecdh_auto(ctx, 1); /* Set security level */ if (level > -1 && level < 6) { /* SSL_set_security_level */ SSL_CTX_set_security_level(ctx, level); } /* set some callbacks */ SSL_CTX_set_default_passwd_cb(ctx, PasswordCallback); SSL_CTX_set_default_passwd_cb_userdata(ctx, (void *)statePtr); /* read a Diffie-Hellman parameters file, or use the built-in one */ Tcl_DStringInit(&ds); #ifdef OPENSSL_NO_DH if (DHparams != NULL) { Tcl_AppendResult(interp, "DH parameter support not available", (char *) NULL); SSL_CTX_free(ctx); return NULL; } #else { DH* dh; if (DHparams != NULL) { BIO *bio; bio = BIO_new_file(F2N(DHparams, &ds), "r"); if (!bio) { Tcl_DStringFree(&ds); Tcl_AppendResult(interp, "Could not find DH parameters file", (char *) NULL); SSL_CTX_free(ctx); return NULL; } dh = PEM_read_bio_DHparams(bio, NULL, NULL, NULL); BIO_free(bio); Tcl_DStringFree(&ds); if (!dh) { Tcl_AppendResult(interp, "Could not read DH parameters from file", (char *) NULL); SSL_CTX_free(ctx); return NULL; } SSL_CTX_set_tmp_dh(ctx, dh); DH_free(dh); } else { /* Use well known DH parameters that have built-in support in OpenSSL */ if (!SSL_CTX_set_dh_auto(ctx, 1)) { Tcl_AppendResult(interp, "Could not enable set DH auto: ", GET_ERR_REASON(), (char *) NULL); SSL_CTX_free(ctx); return NULL; } } } #endif /* set our certificate */ load_private_key = 0; if (certfile != NULL) { load_private_key = 1; if (SSL_CTX_use_certificate_file(ctx, F2N(certfile, &ds), SSL_FILETYPE_PEM) <= 0) { Tcl_DStringFree(&ds); Tcl_AppendResult(interp, "unable to set certificate file ", certfile, ": ", GET_ERR_REASON(), (char *) NULL); SSL_CTX_free(ctx); return NULL; } Tcl_DStringFree(&ds); } else if (cert != NULL) { load_private_key = 1; if (SSL_CTX_use_certificate_ASN1(ctx, (int) cert_len, cert) <= 0) { Tcl_AppendResult(interp, "unable to set certificate: ", GET_ERR_REASON(), (char *) NULL); SSL_CTX_free(ctx); return NULL; } } else { certfile = (char*)X509_get_default_cert_file(); if (SSL_CTX_use_certificate_file(ctx, certfile, SSL_FILETYPE_PEM) <= 0) { #if 0 Tcl_AppendResult(interp, "unable to use default certificate file ", certfile, ": ", GET_ERR_REASON(), (char *) NULL); SSL_CTX_free(ctx); return NULL; #endif } } /* set our private key */ if (load_private_key) { if (keyfile == NULL && key == NULL) { keyfile = certfile; } if (keyfile != NULL) { /* get the private key associated with this certificate */ if (keyfile == NULL) { keyfile = certfile; } if (SSL_CTX_use_PrivateKey_file(ctx, F2N(keyfile, &ds), SSL_FILETYPE_PEM) <= 0) { Tcl_DStringFree(&ds); /* flush the passphrase which might be left in the result */ Tcl_SetResult(interp, NULL, TCL_STATIC); Tcl_AppendResult(interp, "unable to set public key file ", keyfile, " ", GET_ERR_REASON(), (char *) NULL); SSL_CTX_free(ctx); return NULL; } Tcl_DStringFree(&ds); } else if (key != NULL) { if (SSL_CTX_use_PrivateKey_ASN1(EVP_PKEY_RSA, ctx, key, (int) key_len) <= 0) { /* flush the passphrase which might be left in the result */ Tcl_SetResult(interp, NULL, TCL_STATIC); Tcl_AppendResult(interp, "unable to set public key: ", GET_ERR_REASON(), (char *) NULL); SSL_CTX_free(ctx); return NULL; } } /* Now we know that a key and cert have been set against * the SSL context */ if (!SSL_CTX_check_private_key(ctx)) { Tcl_AppendResult(interp, "private key does not match the certificate public key", (char *) NULL); SSL_CTX_free(ctx); return NULL; } } /* Set to use the default location and file for Certificate Authority (CA) certificates. * The default CA certificates directory is called certs in the default OpenSSL * directory. It contains the CA certificates in PEM format, with one certificate per * file. The verify path and store can be overridden by the SSL_CERT_DIR env var. The * default CA certificates file is called cert.pem in the default OpenSSL directory. * The verify file can be overridden by the SSL_CERT_FILE env var. */ if (!SSL_CTX_set_default_verify_paths(ctx)) { abort++; } /* Overrides for the CA verify path and file */ { #if OPENSSL_VERSION_NUMBER < 0x30000000L if (CApath != NULL || CAfile != NULL) { Tcl_DString ds1; Tcl_DStringInit(&ds1); if (!SSL_CTX_load_verify_locations(ctx, F2N(CAfile, &ds), F2N(CApath, &ds1))) { abort++; return NULL; } Tcl_DStringFree(&ds); Tcl_DStringFree(&ds1); /* Set list of CAs to send to client when requesting a client certificate */ /* https://sourceforge.net/p/tls/bugs/57/ */ /* XXX:TODO: Let the user supply values here instead of something that exists on the filesystem */ STACK_OF(X509_NAME) *certNames = SSL_load_client_CA_file(F2N(CAfile, &ds)); if (certNames != NULL) { SSL_CTX_set_client_CA_list(ctx, certNames); } Tcl_DStringFree(&ds); } #else /* Set directory containing CA certificates in PEM format. */ if (CApath != NULL) { if (!SSL_CTX_load_verify_dir(ctx, F2N(CApath, &ds))) { abort++; } Tcl_DStringFree(&ds); } /* Set URI for to a store, which may be a single container or a catalog of containers. */ if (CAstore != NULL) { if (!SSL_CTX_load_verify_store(ctx, F2N(CAstore, &ds))) { abort++; } Tcl_DStringFree(&ds); } /* Set file of CA certificates in PEM format. */ if (CAfile != NULL) { Tcl_Obj *cafileobj = Tcl_NewStringObj(CAfile, -1); Tcl_IncrRefCount(cafileobj); Tcl_Obj *fsinfo = Tcl_FSFileSystemInfo(cafileobj); if (fsinfo) { Tcl_IncrRefCount(fsinfo); Tcl_Obj *fstype = NULL; Tcl_ListObjIndex(interp, fsinfo, 0, &fstype); if (Tcl_StringMatch("native", Tcl_GetString(fstype))) { if (!SSL_CTX_load_verify_file(ctx, F2N(CAfile, &ds))) { abort++; } Tcl_DStringFree(&ds); /* Set list of CAs to send to client when requesting a client certificate */ STACK_OF(X509_NAME) *certNames = SSL_load_client_CA_file(F2N(CAfile, &ds)); if (certNames != NULL) { SSL_CTX_set_client_CA_list(ctx, certNames); } Tcl_DStringFree(&ds); } else { /* Load certificate into memory */ if (!TlsLoadClientCAFileFromMemory(interp, ctx, cafileobj)) { abort++; } } Tcl_DecrRefCount(fsinfo); } else { abort++; /* Path is not recognized */ } Tcl_DecrRefCount(cafileobj); } #endif } if (abort > 0) { /* return error */ } return ctx; } /* *------------------------------------------------------------------- * * StatusObjCmd -- return certificate for connected peer info. * * Results: * A standard Tcl result. * * Side effects: * None. * *------------------------------------------------------------------- */ static int StatusObjCmd(ClientData clientData, Tcl_Interp *interp, int objc, Tcl_Obj *const objv[]) { State *statePtr; X509 *peer; Tcl_Obj *objPtr; Tcl_Channel chan; char *channelName, *ciphers; int mode; const unsigned char *proto; unsigned int len; int nid, res; (void) clientData; dprintf("Called"); if (objc < 2 || objc > 3 || (objc == 3 && !strcmp(Tcl_GetString(objv[1]), "-local"))) { Tcl_WrongNumArgs(interp, 1, objv, "?-local? channel"); return TCL_ERROR; } /* Get channel Id */ channelName = Tcl_GetString(objv[(objc == 2 ? 1 : 2)]); chan = Tcl_GetChannel(interp, channelName, &mode); if (chan == (Tcl_Channel) NULL) { return TCL_ERROR; } /* Make sure to operate on the topmost channel */ chan = Tcl_GetTopChannel(chan); if (Tcl_GetChannelType(chan) != Tls_ChannelType()) { Tcl_AppendResult(interp, "bad channel \"", Tcl_GetChannelName(chan), "\": not a TLS channel", (char *) NULL); Tcl_SetErrorCode(interp, "TLS", "STATUS", "CHANNEL", "INVALID", (char *) NULL); return TCL_ERROR; } statePtr = (State *) Tcl_GetChannelInstanceData(chan); /* Get certificate for peer or self */ if (objc == 2) { peer = SSL_get_peer_certificate(statePtr->ssl); } else { peer = SSL_get_certificate(statePtr->ssl); } /* Get X509 certificate info */ if (peer) { objPtr = Tls_NewX509Obj(interp, peer, 1); if (objc == 2) { X509_free(peer); peer = NULL; } } else { objPtr = Tcl_NewListObj(0, NULL); } /* Peer name */ LAPPEND_STR(interp, objPtr, "peername", SSL_get0_peername(statePtr->ssl), -1); LAPPEND_INT(interp, objPtr, "sbits", SSL_get_cipher_bits(statePtr->ssl, NULL)); ciphers = (char*)SSL_get_cipher(statePtr->ssl); LAPPEND_STR(interp, objPtr, "cipher", ciphers, -1); /* Verify the X509 certificate presented by the peer */ LAPPEND_STR(interp, objPtr, "verifyResult", X509_verify_cert_error_string(SSL_get_verify_result(statePtr->ssl)), -1); /* Verify mode */ mode = SSL_get_verify_mode(statePtr->ssl); if (mode & SSL_VERIFY_NONE) { LAPPEND_STR(interp, objPtr, "verifyMode", "none", -1); } else { Tcl_Obj *listObjPtr = Tcl_NewListObj(0, NULL); if (mode & SSL_VERIFY_PEER) { Tcl_ListObjAppendElement(interp, listObjPtr, Tcl_NewStringObj("peer", -1)); } if (mode & SSL_VERIFY_FAIL_IF_NO_PEER_CERT) { Tcl_ListObjAppendElement(interp, listObjPtr, Tcl_NewStringObj("fail if no peer cert", -1)); } if (mode & SSL_VERIFY_CLIENT_ONCE) { Tcl_ListObjAppendElement(interp, listObjPtr, Tcl_NewStringObj("client once", -1)); } if (mode & SSL_VERIFY_POST_HANDSHAKE) { Tcl_ListObjAppendElement(interp, listObjPtr, Tcl_NewStringObj("post handshake", -1)); } LAPPEND_OBJ(interp, objPtr, "verifyMode", listObjPtr) } /* Verify mode depth */ LAPPEND_INT(interp, objPtr, "verifyDepth", SSL_get_verify_depth(statePtr->ssl)); /* Report the selected protocol as a result of the negotiation */ SSL_get0_alpn_selected(statePtr->ssl, &proto, &len); LAPPEND_STR(interp, objPtr, "alpn", (char *)proto, (Tcl_Size) len); LAPPEND_STR(interp, objPtr, "protocol", SSL_get_version(statePtr->ssl), -1); /* Valid for non-RSA signature and TLS 1.3 */ if (objc == 2) { res = SSL_get_peer_signature_nid(statePtr->ssl, &nid); } else { res = SSL_get_signature_nid(statePtr->ssl, &nid); } if (!res) {nid = 0;} LAPPEND_STR(interp, objPtr, "signatureHashAlgorithm", OBJ_nid2ln(nid), -1); /* Added in OpenSSL 1.1.1a */ #if OPENSSL_VERSION_NUMBER > 0x10101000L if (objc == 2) { res = SSL_get_peer_signature_type_nid(statePtr->ssl, &nid); } else { res = SSL_get_signature_type_nid(statePtr->ssl, &nid); } if (!res) {nid = 0;} LAPPEND_STR(interp, objPtr, "signatureType", OBJ_nid2ln(nid), -1); #endif Tcl_SetObjResult(interp, objPtr); return TCL_OK; } /* *------------------------------------------------------------------- * * ConnectionInfoObjCmd -- return connection info from OpenSSL. * * Results: * A list of connection info * *------------------------------------------------------------------- */ static int ConnectionInfoObjCmd(ClientData clientData, Tcl_Interp *interp, int objc, Tcl_Obj *const objv[]) { Tcl_Channel chan; /* The channel to set a mode on */ State *statePtr; /* client state for ssl socket */ Tcl_Obj *objPtr, *listPtr; const SSL *ssl; const SSL_CIPHER *cipher; const SSL_SESSION *session; const EVP_MD *md; (void) clientData; dprintf("Called"); if (objc != 2) { Tcl_WrongNumArgs(interp, 1, objv, "channel"); return TCL_ERROR; } chan = Tcl_GetChannel(interp, Tcl_GetString(objv[1]), NULL); if (chan == (Tcl_Channel) NULL) { return TCL_ERROR; } /* Make sure to operate on the topmost channel */ chan = Tcl_GetTopChannel(chan); if (Tcl_GetChannelType(chan) != Tls_ChannelType()) { Tcl_AppendResult(interp, "bad channel \"", Tcl_GetChannelName(chan), "\": not a TLS channel", (char *) NULL); Tcl_SetErrorCode(interp, "TLS", "CONNECTION", "CHANNEL", "INVALID", (char *) NULL); return TCL_ERROR; } objPtr = Tcl_NewListObj(0, NULL); /* Connection info */ statePtr = (State *)Tcl_GetChannelInstanceData(chan); ssl = statePtr->ssl; if (ssl != NULL) { const unsigned char *proto; unsigned int ulen; /* Initialization finished */ LAPPEND_BOOL(interp, objPtr, "init_finished", SSL_is_init_finished(ssl)); /* connection state */ LAPPEND_STR(interp, objPtr, "state", SSL_state_string_long(ssl), -1); /* Get SNI requested server name */ LAPPEND_STR(interp, objPtr, "servername", SSL_get_servername(ssl, TLSEXT_NAMETYPE_host_name), -1); /* Report the selected protocol as a result of the negotiation */ SSL_get0_alpn_selected(statePtr->ssl, &proto, &ulen); LAPPEND_STR(interp, objPtr, "alpn", (char *)proto, (Tcl_Size) ulen); /* Get protocol */ LAPPEND_STR(interp, objPtr, "protocol", SSL_get_version(ssl), -1); /* Renegotiation allowed */ LAPPEND_BOOL(interp, objPtr, "renegotiation_allowed", SSL_get_secure_renegotiation_support((SSL *) ssl)); /* Get security level */ LAPPEND_INT(interp, objPtr, "security_level", SSL_get_security_level(ssl)); /* Session info */ LAPPEND_BOOL(interp, objPtr, "session_reused", SSL_session_reused(ssl)); /* Is server info */ LAPPEND_BOOL(interp, objPtr, "is_server", SSL_is_server(ssl)); /* Is DTLS */ LAPPEND_BOOL(interp, objPtr, "is_dtls", SSL_is_dtls(ssl)); #if OPENSSL_VERSION_NUMBER >= 0x30200000L /* Is QUIC */ LAPPEND_BOOL(interp, objPtr, "is_quic", SSL_is_quic(ssl)); /* Is TLS */ LAPPEND_BOOL(interp, objPtr, "is_tls", SSL_is_tls(ssl)); #endif /* DANE TLS authentication */ LAPPEND_BOOL(interp, objPtr, "dane_auth", SSL_get0_dane((SSL *)ssl) != NULL); /* Waiting for async */ LAPPEND_BOOL(interp, objPtr, "waiting_for_async", SSL_waiting_for_async((SSL *)ssl)); /* Time-out */ LAPPEND_LONG(interp, objPtr, "time-out", SSL_get_default_timeout(ssl)); /* Is Certificate Transparency validation enabled */ LAPPEND_BOOL(interp, objPtr, "ct_enabled", SSL_ct_is_enabled(ssl)); } /* Cipher info */ cipher = SSL_get_current_cipher(ssl); if (cipher != NULL) { char buf[BUFSIZ] = {0}; int bits, alg_bits; /* Cipher name */ LAPPEND_STR(interp, objPtr, "cipher", SSL_CIPHER_get_name(cipher), -1); /* RFC name of cipher */ LAPPEND_STR(interp, objPtr, "standard_name", SSL_CIPHER_standard_name(cipher), -1); /* OpenSSL name of cipher */ LAPPEND_STR(interp, objPtr, "openssl_name", OPENSSL_cipher_name(SSL_CIPHER_standard_name(cipher)), -1); /* number of secret bits used for cipher */ bits = SSL_CIPHER_get_bits(cipher, &alg_bits); LAPPEND_INT(interp, objPtr, "secret_bits", bits); LAPPEND_INT(interp, objPtr, "algorithm_bits", alg_bits); /* alg_bits is actual key secret bits. If use bits and secret (algorithm) bits differ, the rest of the bits are fixed, i.e. for limited export ciphers (bits < 56) */ /* Indicates which SSL/TLS protocol version first defined the cipher */ LAPPEND_STR(interp, objPtr, "min_version", SSL_CIPHER_get_version(cipher), -1); /* Cipher NID */ LAPPEND_STR(interp, objPtr, "cipherNID", (char *)OBJ_nid2ln(SSL_CIPHER_get_cipher_nid(cipher)), -1); LAPPEND_STR(interp, objPtr, "digestNID", (char *)OBJ_nid2ln(SSL_CIPHER_get_digest_nid(cipher)), -1); LAPPEND_STR(interp, objPtr, "keyExchangeNID", (char *)OBJ_nid2ln(SSL_CIPHER_get_kx_nid(cipher)), -1); LAPPEND_STR(interp, objPtr, "authenticationNID", (char *)OBJ_nid2ln(SSL_CIPHER_get_auth_nid(cipher)), -1); /* message authentication code - Cipher is AEAD (e.g. GCM or ChaCha20/Poly1305) or not */ /* Authenticated Encryption with associated data (AEAD) check */ LAPPEND_BOOL(interp, objPtr, "cipher_is_aead", SSL_CIPHER_is_aead(cipher)); /* Digest used during the SSL/TLS handshake when using the cipher. */ md = SSL_CIPHER_get_handshake_digest(cipher); LAPPEND_STR(interp, objPtr, "handshake_digest", (char *)EVP_MD_name(md), -1); /* Get OpenSSL-specific ID, not IANA ID */ LAPPEND_INT(interp, objPtr, "cipher_id", (int) SSL_CIPHER_get_id(cipher)); /* Two-byte ID used in the TLS protocol of the given cipher */ LAPPEND_INT(interp, objPtr, "protocol_id", (int) SSL_CIPHER_get_protocol_id(cipher)); /* Textual description of the cipher */ if (SSL_CIPHER_description(cipher, buf, sizeof(buf)) != NULL) { LAPPEND_STR(interp, objPtr, "description", buf, -1); } } /* Session info */ session = SSL_get_session(ssl); if (session != NULL) { const unsigned char *ticket; size_t len2; unsigned int ulen; const unsigned char *session_id, *proto; unsigned char buffer[SSL_MAX_MASTER_KEY_LENGTH]; /* Report the selected protocol as a result of the ALPN negotiation */ SSL_SESSION_get0_alpn_selected(session, &proto, &len2); LAPPEND_STR(interp, objPtr, "alpn", (char *) proto, (Tcl_Size) len2); /* Report the selected protocol as a result of the NPN negotiation */ #ifdef USE_NPN SSL_get0_next_proto_negotiated(ssl, &proto, &ulen); LAPPEND_STR(interp, objPtr, "npn", (char *) proto, (Tcl_Size) ulen); #endif /* Resumable session */ LAPPEND_BOOL(interp, objPtr, "resumable", SSL_SESSION_is_resumable(session)); /* Session start time (seconds since epoch) */ LAPPEND_LONG(interp, objPtr, "start_time", SSL_SESSION_get_time(session)); /* Timeout value - SSL_CTX_get_timeout (in seconds) */ LAPPEND_LONG(interp, objPtr, "timeout", SSL_SESSION_get_timeout(session)); /* Session id - TLSv1.2 and below only */ session_id = SSL_SESSION_get_id(session, &ulen); LAPPEND_BARRAY(interp, objPtr, "session_id", session_id, (Tcl_Size) ulen); /* Session context */ session_id = SSL_SESSION_get0_id_context(session, &ulen); LAPPEND_BARRAY(interp, objPtr, "session_context", session_id, (Tcl_Size) ulen); /* Session ticket - client only */ SSL_SESSION_get0_ticket(session, &ticket, &len2); LAPPEND_BARRAY(interp, objPtr, "session_ticket", ticket, (Tcl_Size) len2); /* Session ticket lifetime hint (in seconds) */ LAPPEND_LONG(interp, objPtr, "lifetime", SSL_SESSION_get_ticket_lifetime_hint(session)); /* Ticket app data */ #if OPENSSL_VERSION_NUMBER < 0x30000000L SSL_SESSION_get0_ticket_appdata((SSL_SESSION *) session, &ticket, &len2); LAPPEND_BARRAY(interp, objPtr, "ticket_app_data", ticket, (Tcl_Size) len2); #endif /* Get master key */ len2 = SSL_SESSION_get_master_key(session, buffer, SSL_MAX_MASTER_KEY_LENGTH); LAPPEND_BARRAY(interp, objPtr, "master_key", buffer, (Tcl_Size) len2); /* Compression id */ unsigned int id = SSL_SESSION_get_compress_id(session); LAPPEND_STR(interp, objPtr, "compression_id", id == 1 ? "zlib" : "none", -1); } /* Compression info */ if (ssl != NULL) { #ifdef HAVE_SSL_COMPRESSION const COMP_METHOD *comp, *expn; comp = SSL_get_current_compression(ssl); expn = SSL_get_current_expansion(ssl); LAPPEND_STR(interp, objPtr, "compression", comp ? SSL_COMP_get_name(comp) : "none", -1); LAPPEND_STR(interp, objPtr, "expansion", expn ? SSL_COMP_get_name(expn) : "none", -1); #else LAPPEND_STR(interp, objPtr, "compression", "none", -1); LAPPEND_STR(interp, objPtr, "expansion", "none", -1); #endif } /* Server info */ { long mode = SSL_CTX_get_session_cache_mode(statePtr->ctx); char *msg; if (mode & SSL_SESS_CACHE_OFF) { msg = "off"; } else if (mode & SSL_SESS_CACHE_CLIENT) { msg = "client"; } else if (mode & SSL_SESS_CACHE_SERVER) { msg = "server"; } else if (mode & SSL_SESS_CACHE_BOTH) { msg = "both"; } else { msg = "unknown"; } LAPPEND_STR(interp, objPtr, "session_cache_mode", msg, -1); } /* CA List */ /* IF not a server, same as SSL_get0_peer_CA_list. If server same as SSL_CTX_get_client_CA_list */ listPtr = Tcl_NewListObj(0, NULL); STACK_OF(X509_NAME) *ca_list; if ((ca_list = SSL_get_client_CA_list(ssl)) != NULL) { char buffer[BUFSIZ]; for (int i = 0; i < sk_X509_NAME_num(ca_list); i++) { X509_NAME *name = sk_X509_NAME_value(ca_list, i); if (name) { X509_NAME_oneline(name, buffer, BUFSIZ); Tcl_ListObjAppendElement(interp, listPtr, Tcl_NewStringObj(buffer, -1)); } } } LAPPEND_OBJ(interp, objPtr, "caList", listPtr); LAPPEND_INT(interp, objPtr, "caListCount", sk_X509_NAME_num(ca_list)); Tcl_SetObjResult(interp, objPtr); return TCL_OK; } /* *------------------------------------------------------------------- * * VersionObjCmd -- return version string from OpenSSL. * * Results: * A standard Tcl result. * * Side effects: * None. * *------------------------------------------------------------------- */ static int VersionObjCmd(ClientData clientData, Tcl_Interp *interp, int objc, Tcl_Obj *const objv[]) { Tcl_Obj *objPtr; (void) clientData; (void) objc; (void) objv; dprintf("Called"); objPtr = Tcl_NewStringObj(OPENSSL_VERSION_TEXT, -1); Tcl_SetObjResult(interp, objPtr); return TCL_OK; } /* *------------------------------------------------------------------- * * MiscObjCmd -- misc commands * * Results: * A standard Tcl result. * * Side effects: * None. * *------------------------------------------------------------------- */ static int MiscObjCmd(ClientData clientData, Tcl_Interp *interp, int objc, Tcl_Obj *const objv[]) { static const char *commands [] = { "req", "strreq", NULL }; enum command { C_REQ, C_STRREQ, C_DUMMY }; Tcl_Size cmd; int isStr; char buffer[16384]; (void) clientData; dprintf("Called"); if (objc < 2) { Tcl_WrongNumArgs(interp, 1, objv, "subcommand ?args?"); return TCL_ERROR; } if (Tcl_GetIndexFromObj(interp, objv[1], commands, "command", 0, &cmd) != TCL_OK) { return TCL_ERROR; } ERR_clear_error(); isStr = (cmd == C_STRREQ); switch ((enum command) cmd) { case C_REQ: case C_STRREQ: { EVP_PKEY *pkey=NULL; X509 *cert=NULL; X509_NAME *name=NULL; Tcl_Obj **listv; Tcl_Size listc; int i; BIO *out=NULL; char *k_C="",*k_ST="",*k_L="",*k_O="",*k_OU="",*k_CN="",*k_Email=""; char *keyout,*pemout,*str; int keysize,serial=0,days=365; #if OPENSSL_VERSION_NUMBER < 0x30000000L BIGNUM *bne = NULL; RSA *rsa = NULL; #else EVP_PKEY_CTX *ctx = NULL; #endif if ((objc<5) || (objc>6)) { Tcl_WrongNumArgs(interp, 2, objv, "keysize keyfile certfile ?info?"); return TCL_ERROR; } if (Tcl_GetIntFromObj(interp, objv[2], &keysize) != TCL_OK) { return TCL_ERROR; } keyout=Tcl_GetString(objv[3]); pemout=Tcl_GetString(objv[4]); if (isStr) { Tcl_SetVar(interp,keyout,"",0); Tcl_SetVar(interp,pemout,"",0); } if (objc>=6) { if (Tcl_ListObjGetElements(interp, objv[5], &listc, &listv) != TCL_OK) { return TCL_ERROR; } if ((listc%2) != 0) { Tcl_SetResult(interp,"Information list must have even number of arguments",NULL); return TCL_ERROR; } for (i=0; i<listc; i+=2) { str=Tcl_GetString(listv[i]); if (strcmp(str,"days")==0) { if (Tcl_GetIntFromObj(interp,listv[i+1],&days)!=TCL_OK) return TCL_ERROR; } else if (strcmp(str,"serial")==0) { if (Tcl_GetIntFromObj(interp,listv[i+1],&serial)!=TCL_OK) return TCL_ERROR; } else if (strcmp(str,"C")==0) { k_C=Tcl_GetString(listv[i+1]); } else if (strcmp(str,"ST")==0) { k_ST=Tcl_GetString(listv[i+1]); } else if (strcmp(str,"L")==0) { k_L=Tcl_GetString(listv[i+1]); } else if (strcmp(str,"O")==0) { k_O=Tcl_GetString(listv[i+1]); } else if (strcmp(str,"OU")==0) { k_OU=Tcl_GetString(listv[i+1]); } else if (strcmp(str,"CN")==0) { k_CN=Tcl_GetString(listv[i+1]); } else if (strcmp(str,"Email")==0) { k_Email=Tcl_GetString(listv[i+1]); } else { Tcl_SetResult(interp,"Unknown parameter",NULL); return TCL_ERROR; } } } #if OPENSSL_VERSION_NUMBER < 0x30000000L bne = BN_new(); rsa = RSA_new(); pkey = EVP_PKEY_new(); if (bne == NULL || rsa == NULL || pkey == NULL || !BN_set_word(bne,RSA_F4) || !RSA_generate_key_ex(rsa, keysize, bne, NULL) || !EVP_PKEY_assign_RSA(pkey, rsa)) { EVP_PKEY_free(pkey); /* RSA_free(rsa); freed by EVP_PKEY_free */ BN_free(bne); #else pkey = EVP_RSA_gen((unsigned int) keysize); ctx = EVP_PKEY_CTX_new(pkey,NULL); if (pkey == NULL || ctx == NULL || !EVP_PKEY_keygen_init(ctx) || !EVP_PKEY_CTX_set_rsa_keygen_bits(ctx, keysize) || !EVP_PKEY_keygen(ctx, &pkey)) { EVP_PKEY_free(pkey); EVP_PKEY_CTX_free(ctx); #endif Tcl_SetResult(interp,"Error generating private key",NULL); return TCL_ERROR; } else { if (isStr) { out=BIO_new(BIO_s_mem()); PEM_write_bio_PrivateKey(out,pkey,NULL,NULL,0,NULL,NULL); i=BIO_read(out,buffer,sizeof(buffer)-1); i=(i<0) ? 0 : i; buffer[i]='\0'; Tcl_SetVar(interp,keyout,buffer,0); BIO_flush(out); BIO_free(out); } else { out=BIO_new(BIO_s_file()); BIO_write_filename(out,keyout); PEM_write_bio_PrivateKey(out,pkey,NULL,NULL,0,NULL,NULL); /* PEM_write_bio_RSAPrivateKey(out, rsa, NULL, NULL, 0, NULL, NULL); */ BIO_free_all(out); } if ((cert=X509_new())==NULL) { Tcl_SetResult(interp,"Error generating certificate request",NULL); EVP_PKEY_free(pkey); #if OPENSSL_VERSION_NUMBER < 0x30000000L BN_free(bne); #endif return TCL_ERROR; } X509_set_version(cert,2); ASN1_INTEGER_set(X509_get_serialNumber(cert),serial); X509_gmtime_adj(X509_getm_notBefore(cert),0); X509_gmtime_adj(X509_getm_notAfter(cert),(long)60*60*24*days); X509_set_pubkey(cert,pkey); name=X509_get_subject_name(cert); X509_NAME_add_entry_by_txt(name,"C", MBSTRING_ASC, (const unsigned char *) k_C, -1, -1, 0); X509_NAME_add_entry_by_txt(name,"ST", MBSTRING_ASC, (const unsigned char *) k_ST, -1, -1, 0); X509_NAME_add_entry_by_txt(name,"L", MBSTRING_ASC, (const unsigned char *) k_L, -1, -1, 0); X509_NAME_add_entry_by_txt(name,"O", MBSTRING_ASC, (const unsigned char *) k_O, -1, -1, 0); X509_NAME_add_entry_by_txt(name,"OU", MBSTRING_ASC, (const unsigned char *) k_OU, -1, -1, 0); X509_NAME_add_entry_by_txt(name,"CN", MBSTRING_ASC, (const unsigned char *) k_CN, -1, -1, 0); X509_NAME_add_entry_by_txt(name,"Email", MBSTRING_ASC, (const unsigned char *) k_Email, -1, -1, 0); X509_set_subject_name(cert,name); if (!X509_sign(cert,pkey,EVP_sha256())) { X509_free(cert); EVP_PKEY_free(pkey); #if OPENSSL_VERSION_NUMBER < 0x30000000L BN_free(bne); #endif Tcl_SetResult(interp,"Error signing certificate",NULL); return TCL_ERROR; } if (isStr) { out=BIO_new(BIO_s_mem()); PEM_write_bio_X509(out,cert); i=BIO_read(out,buffer,sizeof(buffer)-1); i=(i<0) ? 0 : i; buffer[i]='\0'; Tcl_SetVar(interp,pemout,buffer,0); BIO_flush(out); BIO_free(out); } else { out=BIO_new(BIO_s_file()); BIO_write_filename(out,pemout); PEM_write_bio_X509(out,cert); BIO_free_all(out); } X509_free(cert); EVP_PKEY_free(pkey); #if OPENSSL_VERSION_NUMBER < 0x30000000L BN_free(bne); #endif } } break; default: break; } return TCL_OK; } /********************/ /* Init */ /********************/ /* *------------------------------------------------------------------- * * Tls_Free -- * * This procedure cleans up when a SSL socket based channel * is closed and its reference count falls below 1 * * Results: * none * * Side effects: * Frees all the state * *------------------------------------------------------------------- */ void Tls_Free(tls_free_type *blockPtr) { State *statePtr = (State *)blockPtr; dprintf("Called"); Tls_Clean(statePtr); ckfree(blockPtr); } /* *------------------------------------------------------------------- * * Tls_Clean -- * * This procedure cleans up when a SSL socket based channel * is closed and its reference count falls below 1. This should * be called synchronously by the CloseProc, not in the * EventuallyFree callback. * * Results: * none * * Side effects: * Frees all the state * *------------------------------------------------------------------- */ void Tls_Clean(State *statePtr) { dprintf("Called"); /* * we're assuming here that we're single-threaded */ if (statePtr->timer != (Tcl_TimerToken) NULL) { Tcl_DeleteTimerHandler(statePtr->timer); statePtr->timer = NULL; } /* Remove callbacks */ if (statePtr->callback) { Tcl_DecrRefCount(statePtr->callback); statePtr->callback = NULL; } if (statePtr->password) { Tcl_DecrRefCount(statePtr->password); statePtr->password = NULL; } if (statePtr->vcmd) { Tcl_DecrRefCount(statePtr->vcmd); statePtr->vcmd = NULL; } if (statePtr->protos) { ckfree(statePtr->protos); statePtr->protos = NULL; } if (statePtr->bio) { /* This will call SSL_shutdown. Bug 1414045 */ dprintf("BIO_free_all(%p)", statePtr->bio); BIO_free_all(statePtr->bio); statePtr->bio = NULL; } if (statePtr->ssl) { dprintf("SSL_free(%p)", statePtr->ssl); SSL_free(statePtr->ssl); statePtr->ssl = NULL; } if (statePtr->ctx) { SSL_CTX_free(statePtr->ctx); statePtr->ctx = NULL; } dprintf("Returning"); } /* *---------------------------------------------------------------------- * * Build Info Command -- * * Create command to return build info for package. * * Results: * A standard Tcl result * * Side effects: * Created build-info command. * *---------------------------------------------------------------------- */ #ifndef STRINGIFY # define STRINGIFY(x) STRINGIFY1(x) # define STRINGIFY1(x) #x #endif int BuildInfoCommand(Tcl_Interp* interp) { Tcl_CmdInfo info; if (Tcl_GetCommandInfo(interp, "::tcl::build-info", &info)) { Tcl_CreateObjCommand(interp, "::tls::build-info", info.objProc, (void *)( PACKAGE_VERSION "+" STRINGIFY(TLS_VERSION_UUID) #if defined(__clang__) && defined(__clang_major__) ".clang-" STRINGIFY(__clang_major__) #if __clang_minor__ < 10 "0" #endif STRINGIFY(__clang_minor__) #endif #if defined(__cplusplus) && !defined(__OBJC__) ".cplusplus" #endif #ifndef NDEBUG ".debug" #endif #if !defined(__clang__) && !defined(__INTEL_COMPILER) && defined(__GNUC__) ".gcc-" STRINGIFY(__GNUC__) #if __GNUC_MINOR__ < 10 "0" #endif STRINGIFY(__GNUC_MINOR__) #endif #ifdef __INTEL_COMPILER ".icc-" STRINGIFY(__INTEL_COMPILER) #endif #ifdef TCL_MEM_DEBUG ".memdebug" #endif #if defined(_MSC_VER) ".msvc-" STRINGIFY(_MSC_VER) #endif #ifdef USE_NMAKE ".nmake" #endif #ifndef TCL_CFG_OPTIMIZED ".no-optimize" #endif #ifdef __OBJC__ ".objective-c" #if defined(__cplusplus) "plusplus" #endif #endif #ifdef TCL_CFG_PROFILED ".profile" #endif #ifdef PURIFY ".purify" #endif #ifdef STATIC_BUILD ".static" #endif ), NULL); } return TCL_OK; } /* *------------------------------------------------------* * * TlsLibShutdown -- * * Shutdown SSL library once per application * * Results: * A standard TCL result * * Side effects: * Shutdown SSL library * *------------------------------------------------------* */ void TlsLibShutdown(ClientData clientData) { dprintf("Called"); BIO_cleanup(); } /* *------------------------------------------------------* * * TlsLibInit -- * * Initializes SSL library once per application * * Results: * A standard Tcl result * * Side effects: * Initializes SSL library * *------------------------------------------------------* */ static int TlsLibInit() { static int initialized = 0; dprintf("Called"); if (!initialized) { /* Initialize BOTH libcrypto and libssl. */ if (!OPENSSL_init_ssl(OPENSSL_INIT_LOAD_SSL_STRINGS | OPENSSL_INIT_LOAD_CRYPTO_STRINGS | OPENSSL_INIT_ADD_ALL_CIPHERS | OPENSSL_INIT_ADD_ALL_DIGESTS | OPENSSL_INIT_LOAD_CONFIG | OPENSSL_INIT_ASYNC, NULL)) { return TCL_ERROR; } /* Create BIO handlers */ BIO_new_tcl(NULL, 0); /* Create exit handler */ Tcl_CreateExitHandler(TlsLibShutdown, NULL); initialized = 1; } return TCL_OK; } /* Init script */ static const char tlsTclInitScript[] = { #include "tls.tcl.h" }; /* *------------------------------------------------------------------- * * Tls_Init -- * * This is a package initialization procedure, which is called * by TCL when this package is to be added to an interpreter. * * Results: * Initializes structures and creates commands. * * Side effects: * Create the commands * *------------------------------------------------------------------- */ #if TCL_MAJOR_VERSION > 8 #define MIN_VERSION "9.0" #else #define MIN_VERSION "8.5" #endif DLLEXPORT int Tls_Init(Tcl_Interp *interp) { dprintf("Called"); #ifdef USE_TCL_STUBS if (Tcl_InitStubs(interp, MIN_VERSION, 0) == NULL) { return TCL_ERROR; } #else if (Tcl_PkgRequireEx(interp, "Tcl", MIN_VERSION, 0, NULL) == NULL) { return TCL_ERROR; } #endif if (TlsLibInit() != TCL_OK) { Tcl_AppendResult(interp, "could not initialize SSL library", (char *) NULL); return TCL_ERROR; } Tcl_CreateObjCommand(interp, "::tls::ciphers", CiphersObjCmd, (ClientData) NULL, (Tcl_CmdDeleteProc *) NULL); Tcl_CreateObjCommand(interp, "::tls::connection", ConnectionInfoObjCmd, (ClientData) NULL, (Tcl_CmdDeleteProc *) NULL); Tcl_CreateObjCommand(interp, "::tls::handshake", HandshakeObjCmd, (ClientData) NULL, (Tcl_CmdDeleteProc *) NULL); Tcl_CreateObjCommand(interp, "::tls::import", ImportObjCmd, (ClientData) NULL, (Tcl_CmdDeleteProc *) NULL); Tcl_CreateObjCommand(interp, "::tls::unimport", UnimportObjCmd, (ClientData) NULL, (Tcl_CmdDeleteProc *) NULL); Tcl_CreateObjCommand(interp, "::tls::unstack", UnimportObjCmd, (ClientData) NULL, (Tcl_CmdDeleteProc *) NULL); Tcl_CreateObjCommand(interp, "::tls::status", StatusObjCmd, (ClientData) NULL, (Tcl_CmdDeleteProc *) NULL); Tcl_CreateObjCommand(interp, "::tls::version", VersionObjCmd, (ClientData) NULL, (Tcl_CmdDeleteProc *) NULL); Tcl_CreateObjCommand(interp, "::tls::misc", MiscObjCmd, (ClientData) NULL, (Tcl_CmdDeleteProc *) NULL); Tcl_CreateObjCommand(interp, "::tls::protocols", ProtocolsObjCmd, (ClientData) NULL, (Tcl_CmdDeleteProc *) NULL); BuildInfoCommand(interp); if (interp && Tcl_Eval(interp, tlsTclInitScript) != TCL_OK) { return TCL_ERROR; } return Tcl_PkgProvide(interp, PACKAGE_NAME, PACKAGE_VERSION); } /* *------------------------------------------------------------------- * * Tls_SafeInit -- * * This is a package initialization procedure for safe interps. * * Results: * Same as of 'Tls_Init' * * Side effects: * Same as of 'Tls_Init' * *------------------------------------------------------------------- */ DLLEXPORT int Tls_SafeInit(Tcl_Interp *interp) { dprintf("Called"); return Tls_Init(interp); }