# tcl.m4 --
#
# This file provides a set of autoconf macros to help TEA-enable
# a Tcl extension.
#
# Copyright (c) 1999 Scriptics Corporation.
#
# See the file "license.terms" for information on usage and redistribution
# of this file, and for a DISCLAIMER OF ALL WARRANTIES.
#------------------------------------------------------------------------
# SC_PATH_TCLCONFIG --
#
# Locate the tclConfig.sh file and perform a sanity check on
# the Tcl compile flags
#
# Arguments:
# none
#
# Results:
#
# Adds the following arguments to configure:
# --with-tcl=...
#
# Defines the following vars:
# TCL_BIN_DIR Full path to the directory containing
# the tclConfig.sh file
#------------------------------------------------------------------------
AC_DEFUN(SC_PATH_TCLCONFIG, [
#
# Ok, lets find the tcl configuration
# First, look for one uninstalled.
# the alternative search directory is invoked by --with-tcl
#
if test x"${no_tcl}" = x ; then
# we reset no_tcl in case something fails here
no_tcl=true
AC_ARG_WITH(tcl, [ --with-tcl directory containing tcl configuration (tclConfig.sh)], with_tclconfig=${withval})
AC_MSG_CHECKING([for Tcl configuration])
AC_CACHE_VAL(ac_cv_c_tclconfig,[
# First check to see if --with-tcl was specified.
if test x"${with_tclconfig}" != x ; then
if test -f "${with_tclconfig}/tclConfig.sh" ; then
ac_cv_c_tclconfig=`(cd ${with_tclconfig}; pwd)`
else
AC_MSG_ERROR([${with_tclconfig} directory doesn't contain tclConfig.sh])
fi
fi
# then check for a private Tcl installation
if test x"${ac_cv_c_tclconfig}" = x ; then
for i in \
../tcl \
`ls -dr ../tcl[[8-9]].[[0-9]]* 2>/dev/null` \
../../tcl \
`ls -dr ../../tcl[[8-9]].[[0-9]]* 2>/dev/null` \
../../../tcl \
`ls -dr ../../../tcl[[8-9]].[[0-9]]* 2>/dev/null` ; do
if test -f "$i/unix/tclConfig.sh" ; then
ac_cv_c_tclconfig=`(cd $i/unix; pwd)`
break
fi
done
fi
# check in a few common install locations
if test x"${ac_cv_c_tclconfig}" = x ; then
for i in `ls -d ${prefix}/lib 2>/dev/null` \
`ls -d /usr/local/lib 2>/dev/null` ; do
if test -f "$i/tclConfig.sh" ; then
ac_cv_c_tclconfig=`(cd $i; pwd)`
break
fi
done
fi
# check in a few other private locations
if test x"${ac_cv_c_tclconfig}" = x ; then
for i in \
${srcdir}/../tcl \
`ls -dr ${srcdir}/../tcl[[8-9]].[[0-9]]* 2>/dev/null` ; do
if test -f "$i/unix/tclConfig.sh" ; then
ac_cv_c_tclconfig=`(cd $i/unix; pwd)`
break
fi
done
fi
])
if test x"${ac_cv_c_tclconfig}" = x ; then
TCL_BIN_DIR="# no Tcl configs found"
AC_MSG_WARN(Can't find Tcl configuration definitions)
exit 0
else
no_tcl=
TCL_BIN_DIR=${ac_cv_c_tclconfig}
AC_MSG_RESULT(found $TCL_BIN_DIR/tclConfig.sh)
fi
fi
])
#------------------------------------------------------------------------
# SC_PATH_TKCONFIG --
#
# Locate the tkConfig.sh file
#
# Arguments:
# none
#
# Results:
#
# Adds the following arguments to configure:
# --with-tk=...
#
# Defines the following vars:
# TK_BIN_DIR Full path to the directory containing
# the tkConfig.sh file
#------------------------------------------------------------------------
AC_DEFUN(SC_PATH_TKCONFIG, [
#
# Ok, lets find the tk configuration
# First, look for one uninstalled.
# the alternative search directory is invoked by --with-tk
#
if test x"${no_tk}" = x ; then
# we reset no_tk in case something fails here
no_tk=true
AC_ARG_WITH(tk, [ --with-tk directory containing tk configuration (tkConfig.sh)], with_tkconfig=${withval})
AC_MSG_CHECKING([for Tk configuration])
AC_CACHE_VAL(ac_cv_c_tkconfig,[
# First check to see if --with-tkconfig was specified.
if test x"${with_tkconfig}" != x ; then
if test -f "${with_tkconfig}/tkConfig.sh" ; then
ac_cv_c_tkconfig=`(cd ${with_tkconfig}; pwd)`
else
AC_MSG_ERROR([${with_tkconfig} directory doesn't contain tkConfig.sh])
fi
fi
# then check for a private Tk library
if test x"${ac_cv_c_tkconfig}" = x ; then
for i in \
../tk \
`ls -dr ../tk[[8-9]].[[0-9]]* 2>/dev/null` \
../../tk \
`ls -dr ../../tk[[8-9]].[[0-9]]* 2>/dev/null` \
../../../tk \
`ls -dr ../../../tk[[8-9]].[[0-9]]* 2>/dev/null` ; do
if test -f "$i/unix/tkConfig.sh" ; then
ac_cv_c_tkconfig=`(cd $i/unix; pwd)`
break
fi
done
fi
# check in a few common install locations
if test x"${ac_cv_c_tkconfig}" = x ; then
for i in `ls -d ${prefix}/lib 2>/dev/null` \
`ls -d /usr/local/lib 2>/dev/null` ; do
if test -f "$i/tkConfig.sh" ; then
ac_cv_c_tkconfig=`(cd $i; pwd)`
break
fi
done
fi
# check in a few other private locations
if test x"${ac_cv_c_tkconfig}" = x ; then
for i in \
${srcdir}/../tk \
`ls -dr ${srcdir}/../tk[[8-9]].[[0-9]]* 2>/dev/null` ; do
if test -f "$i/unix/tkConfig.sh" ; then
ac_cv_c_tkconfig=`(cd $i/unix; pwd)`
break
fi
done
fi
])
if test x"${ac_cv_c_tkconfig}" = x ; then
TK_BIN_DIR="# no Tk configs found"
AC_MSG_WARN(Can't find Tk configuration definitions)
exit 0
else
no_tk=
TK_BIN_DIR=${ac_cv_c_tkconfig}
AC_MSG_RESULT(found $TK_BIN_DIR/tkConfig.sh)
fi
fi
])
#------------------------------------------------------------------------
# SC_LOAD_TCLCONFIG --
#
# Load the tclConfig.sh file
#
# Arguments:
#
# Requires the following vars to be set:
# TCL_BIN_DIR
#
# Results:
#
# Subst the following vars:
# TCL_BIN_DIR
# TCL_SRC_DIR
# TCL_LIB_FILE
#
#------------------------------------------------------------------------
AC_DEFUN(SC_LOAD_TCLCONFIG, [
AC_MSG_CHECKING([for existence of $TCL_BIN_DIR/tclConfig.sh])
if test -f "$TCL_BIN_DIR/tclConfig.sh" ; then
AC_MSG_RESULT([loading])
. $TCL_BIN_DIR/tclConfig.sh
else
AC_MSG_RESULT([file not found])
fi
#
# The eval is required to do the TCL_DBGX substitution in the
# TCL_LIB_FILE variable
#
eval TCL_LIB_FILE=${TCL_LIB_FILE}
eval TCL_LIB_FLAG=${TCL_LIB_FLAG}
AC_SUBST(TCL_DBGX)
AC_SUBST(TCL_BIN_DIR)
AC_SUBST(TCL_SRC_DIR)
AC_SUBST(TCL_LIB_FILE)
AC_SUBST(TCL_LIBS)
AC_SUBST(TCL_DEFS)
AC_SUBST(TCL_SHLIB_LD_LIBS)
AC_SUBST(TCL_EXTRA_CFLAGS)
AC_SUBST(TCL_LD_FLAGS)
AC_SUBST(TCL_LIB_FILE)
AC_SUBST(TCL_STUB_LIB_FILE)
AC_SUBST(TCL_LIB_SPEC)
AC_SUBST(TCL_BUILD_LIB_SPEC)
AC_SUBST(TCL_STUB_LIB_SPEC)
AC_SUBST(TCL_BUILD_STUB_LIB_SPEC)
])
#------------------------------------------------------------------------
# SC_LOAD_TKCONFIG --
#
# Load the tkConfig.sh file
#
# Arguments:
#
# Requires the following vars to be set:
# TK_BIN_DIR
#
# Results:
#
# Sets the following vars that should be in tkConfig.sh:
# TK_BIN_DIR
#------------------------------------------------------------------------
AC_DEFUN(SC_LOAD_TKCONFIG, [
AC_MSG_CHECKING([for existence of $TK_BIN_DIR/tkConfig.sh])
if test -f "$TK_BIN_DIR/tkConfig.sh" ; then
AC_MSG_RESULT([loading])
. $TK_BIN_DIR/tkConfig.sh
else
AC_MSG_RESULT([could not find $TK_BIN_DIR/tkConfig.sh])
fi
AC_SUBST(TK_BIN_DIR)
AC_SUBST(TK_SRC_DIR)
AC_SUBST(TK_LIB_FILE)
AC_SUBST(TK_XINCLUDES)
])
#------------------------------------------------------------------------
# SC_ENABLE_GCC --
#
# Allows the use of GCC if available
#
# Arguments:
# none
#
# Results:
#
# Adds the following arguments to configure:
# --enable-gcc
#
# Sets the following vars:
# CC Command to use for the compiler
#------------------------------------------------------------------------
AC_DEFUN(SC_ENABLE_GCC, [
AC_ARG_ENABLE(gcc, [ --enable-gcc allow use of gcc if available [--disable-gcc]],
[ok=$enableval], [ok=no])
if test "$ok" = "yes"; then
CC=gcc
else
case "`uname -s`" in
*win32* | *WIN32* | *CYGWIN_NT*)
CC=cl
;;
*)
CC=${CC-cc}
;;
esac
fi
AC_PROG_CC
])
#------------------------------------------------------------------------
# SC_ENABLE_SHARED --
#
# Allows the building of shared libraries
#
# Arguments:
# none
#
# Results:
#
# Adds the following arguments to configure:
# --enable-shared=yes|no
#
# Defines the following vars:
# STATIC_BUILD Used for building import/export libraries
# on Windows.
#
# Sets the following vars:
# SHARED_BUILD Value of 1 or 0
#------------------------------------------------------------------------
AC_DEFUN(SC_ENABLE_SHARED, [
AC_MSG_CHECKING([how to build libraries])
AC_ARG_ENABLE(shared,
[ --enable-shared build and link with shared libraries [--enable-shared]],
[tcl_ok=$enableval], [tcl_ok=yes])
if test "${enable_shared+set}" = set; then
enableval="$enable_shared"
tcl_ok=$enableval
else
tcl_ok=yes
fi
if test "$tcl_ok" = "yes" ; then
AC_MSG_RESULT([shared])
SHARED_BUILD=1
else
AC_MSG_RESULT([static])
SHARED_BUILD=0
AC_DEFINE(STATIC_BUILD)
fi
])
#------------------------------------------------------------------------
# SC_ENABLE_THREADS --
#
# Specify if thread support should be enabled
#
# Arguments:
# none
#
# Results:
#
# Adds the following arguments to configure:
# --enable-threads
#
# Sets the following vars:
# THREADS_LIBS Thread library(s)
#
# Defines the following vars:
# TCL_THREADS
# _REENTRANT
#
#------------------------------------------------------------------------
AC_DEFUN(SC_ENABLE_THREADS, [
AC_MSG_CHECKING(for building with threads)
AC_ARG_ENABLE(threads, [ --enable-threads build with threads],
[tcl_ok=$enableval], [tcl_ok=no])
if test "$tcl_ok" = "yes"; then
TCL_THREADS=1
AC_DEFINE(TCL_THREADS)
AC_DEFINE(_REENTRANT)
case "`uname -s`" in
*win32* | *WIN32* | *CYGWIN_NT*)
AC_MSG_RESULT(yes)
;;
*)
AC_CHECK_LIB(pthread,pthread_mutex_init,tcl_ok=yes,tcl_ok=no)
if test "$tcl_ok" = "yes"; then
# The space is needed
THREADS_LIBS=" -lpthread"
AC_MSG_RESULT(yes)
else
TCL_THREADS=0
AC_MSG_RESULT(no)
AC_MSG_WARN("Don t know how to find pthread lib on your system - you must disable thread support or edit the LIBS in the Makefile...")
fi
;;
esac
else
TCL_THREADS=0
AC_MSG_RESULT(no (default))
fi
])
#------------------------------------------------------------------------
# SC_ENABLE_SYMBOLS --
#
# Specify if debugging symbols should be used
#
# Arguments:
# none
#
# Requires the following vars to be set:
# CFLAGS_DEBUG
# CFLAGS_OPTIMIZE
# LDFLAGS_DEBUG
# LDFLAGS_OPTIMIZE
#
# Results:
#
# Adds the following arguments to configure:
# --enable-symbols
#
# Defines the following vars:
# CFLAGS_DEFAULT Sets to CFLAGS_DEBUG if true
# Sets to CFLAGS_OPTIMIZE if false
# LDFLAGS_DEFAULT Sets to LDFLAGS_DEBUG if true
# Sets to LDFLAGS_OPTIMIZE if false
# DBGX Debug library extension
#
#------------------------------------------------------------------------
AC_DEFUN(SC_ENABLE_SYMBOLS, [
case "`uname -s`" in
*win32* | *WIN32* | *CYGWIN_NT*)
tcl_dbgx=d
;;
*)
tcl_dbgx=g
;;
esac
AC_MSG_CHECKING([for build with symbols])
AC_ARG_ENABLE(symbols, [ --enable-symbols build with debugging symbols [--disable-symbols]], [tcl_ok=$enableval], [tcl_ok=no])
if test "$tcl_ok" = "yes"; then
CFLAGS_DEFAULT="${CFLAGS_DEBUG}"
LDFLAGS_DEFAULT="${LDFLAGS_DEBUG}"
DBGX=${tcl_dbgx}
TCL_DBGX=${tcl_dbgx}
AC_MSG_RESULT([yes])
else
CFLAGS_DEFAULT="${CFLAGS_OPTIMIZE}"
LDFLAGS_DEFAULT="${LDFLAGS_OPTIMIZE}"
DBGX=""
TCL_DBGX=""
AC_MSG_RESULT([no])
fi
AC_SUBST(TCL_DBGX)
AC_SUBST(CFLAGS_DEFAULT)
AC_SUBST(LDFLAGS_DEFAULT)
])
#--------------------------------------------------------------------
# SC_CONFIG_CFLAGS
#
# Try to determine the proper flags to pass to the compiler
# for building shared libraries and other such nonsense.
#
# Arguments:
# none
#
# Results:
#
# Defines the following vars:
#
# DL_OBJS - Name of the object file that implements dynamic
# loading for Tcl on this system.
# DL_LIBS - Library file(s) to include in tclsh and other base
# applications in order for the "load" command to work.
# LDFLAGS - Flags to pass to the compiler when linking object
# files into an executable application binary such
# as tclsh.
# LD_SEARCH_FLAGS-Flags to pass to ld, such as "-R /usr/local/tcl/lib",
# that tell the run-time dynamic linker where to look
# for shared libraries such as libtcl.so. Depends on
# the variable LIB_RUNTIME_DIR in the Makefile.
# MAKE_LIB - Command to execute to build the Tcl library;
# differs depending on whether or not Tcl is being
# compiled as a shared library.
# SHLIB_CFLAGS - Flags to pass to cc when compiling the components
# of a shared library (may request position-independent
# code, among other things).
# SHLIB_LD - Base command to use for combining object files
# into a shared library.
# SHLIB_LD_LIBS - Dependent libraries for the linker to scan when
# creating shared libraries. This symbol typically
# goes at the end of the "ld" commands that build
# shared libraries. The value of the symbol is
# "${LIBS}" if all of the dependent libraries should
# be specified when creating a shared library. If
# dependent libraries should not be specified (as on
# SunOS 4.x, where they cause the link to fail, or in
# general if Tcl and Tk aren't themselves shared
# libraries), then this symbol has an empty string
# as its value.
# SHLIB_SUFFIX - Suffix to use for the names of dynamically loadable
# extensions. An empty string means we don't know how
# to use shared libraries on this platform.
# TCL_LIB_FILE - Name of the file that contains the Tcl library, such
# as libtcl7.8.so or libtcl7.8.a.
# TCL_LIB_SUFFIX -Specifies everything that comes after the "libtcl"
# in the shared library name, using the $VERSION variable
# to put the version in the right place. This is used
# by platforms that need non-standard library names.
# Examples: ${VERSION}.so.1.1 on NetBSD, since it needs
# to have a version after the .so, and ${VERSION}.a
# on AIX, since the Tcl shared library needs to have
# a .a extension whereas shared objects for loadable
# extensions have a .so extension. Defaults to
# ${VERSION}${SHLIB_SUFFIX}.
# TCL_NEEDS_EXP_FILE -
# 1 means that an export file is needed to link to a
# shared library.
# TCL_EXP_FILE - The name of the installed export / import file which
# should be used to link to the Tcl shared library.
# Empty if Tcl is unshared.
# TCL_BUILD_EXP_FILE -
# The name of the built export / import file which
# should be used to link to the Tcl shared library.
# Empty if Tcl is unshared.
# CFLAGS_DEBUG -
# Flags used when running the compiler in debug mode
# CFLAGS_OPTIMIZE -
# Flags used when running the compiler in optimize mode
#
# EXTRA_CFLAGS
#
# Subst's the following vars:
# DL_LIBS
# CFLAGS_DEBUG
# CFLAGS_OPTIMIZE
#--------------------------------------------------------------------
AC_DEFUN(SC_CONFIG_CFLAGS, [
# Step 0: Enable 64 bit support?
AC_MSG_CHECKING([if 64bit support is enabled])
AC_ARG_ENABLE(64bit,[ --enable-64bit enable 64bit support],,enableval="no")
if test "$enableval" = "yes"; then
AC_MSG_RESULT(Will compile with 64bit support)
do64bit=yes
else
do64bit=no
fi
AC_MSG_RESULT($do64bit)
# Step 1: set the variable "system" to hold the name and version number
# for the system. This can usually be done via the "uname" command, but
# there are a few systems, like Next, where this doesn't work.
AC_MSG_CHECKING([system version (for dynamic loading)])
if test -f /usr/lib/NextStep/software_version; then
system=NEXTSTEP-`awk '/3/,/3/' /usr/lib/NextStep/software_version`
else
system=`uname -s`-`uname -r`
if test "$?" -ne 0 ; then
AC_MSG_RESULT([unknown (can't find uname command)])
system=unknown
else
# Special check for weird MP-RAS system (uname returns weird
# results, and the version is kept in special file).
if test -r /etc/.relid -a "X`uname -n`" = "X`uname -s`" ; then
system=MP-RAS-`awk '{print $3}' /etc/.relid'`
fi
if test "`uname -s`" = "AIX" ; then
system=AIX-`uname -v`.`uname -r`
fi
AC_MSG_RESULT($system)
fi
fi
# Step 2: check for existence of -ldl library. This is needed because
# Linux can use either -ldl or -ldld for dynamic loading.
AC_CHECK_LIB(dl, dlopen, have_dl=yes, have_dl=no)
# Step 3: set configuration options based on system name and version.
do64bit_ok=no
fullSrcDir=`cd $srcdir; pwd`
EXTRA_CFLAGS=""
TCL_EXPORT_FILE_SUFFIX=""
UNSHARED_LIB_SUFFIX=""
TCL_TRIM_DOTS='`echo ${VERSION} | tr -d .`'
ECHO_VERSION='`echo ${VERSION}`'
TCL_LIB_VERSIONS_OK=ok
CFLAGS_DEBUG=-g
CFLAGS_OPTIMIZE=-O
TCL_NEEDS_EXP_FILE=0
TCL_BUILD_EXP_FILE=""
TCL_EXP_FILE=""
STLIB_LD="ar cr"
case $system in
AIX-4.[[2-9]])
SHLIB_CFLAGS=""
SHLIB_LD="$fullSrcDir/ldAix /bin/ld -bhalt:4 -bM:SRE -bE:lib.exp -H512 -T512 -bnoentry"
SHLIB_LD_LIBS='${LIBS}'
SHLIB_SUFFIX=".so"
DL_OBJS="tclLoadDl.o"
DL_LIBS="-ldl"
LDFLAGS=""
LD_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}'
TCL_NEEDS_EXP_FILE=1
TCL_EXPORT_FILE_SUFFIX='${VERSION}\$\{DBGX\}.exp'
;;
AIX-*)
SHLIB_CFLAGS=""
SHLIB_LD="$fullSrcDir/ldAix /bin/ld -bhalt:4 -bM:SRE -bE:lib.exp -H512 -T512"
SHLIB_LD_LIBS='${LIBS}'
SHLIB_SUFFIX=".so"
DL_OBJS="tclLoadDl.o"
LIBOBJS="$LIBOBJS tclLoadAix.o"
DL_LIBS="-lld"
LDFLAGS=""
LD_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}'
TCL_NEEDS_EXP_FILE=1
TCL_EXPORT_FILE_SUFFIX='${VERSION}\$\{DBGX\}.exp'
;;
BSD/OS-2.1*|BSD/OS-3*)
SHLIB_CFLAGS=""
SHLIB_LD="shlicc -r"
SHLIB_LD_LIBS='${LIBS}'
SHLIB_SUFFIX=".so"
DL_OBJS="tclLoadDl.o"
DL_LIBS="-ldl"
LDFLAGS=""
LD_SEARCH_FLAGS=""
;;
BSD/OS-4.*)
SHLIB_CFLAGS="-export-dynamic -fPIC"
SHLIB_LD="cc -shared"
SHLIB_LD_LIBS='${LIBS}'
SHLIB_SUFFIX=".so"
DL_OBJS="tclLoadDl.o"
DL_LIBS="-ldl"
LDFLAGS="-export-dynamic"
LD_SEARCH_FLAGS=""
;;
*win32*|*WIN32*|CYGWIN_NT*|cygwin_nt*)
CFLAGS_DEBUG="-nologo -Z7 -Od -WX ${runtime}d"
CFLAGS_OPTIMIZE="-nologo -Oti -Gs -GD ${runtime}"
LDFLAGS_CONSOLE="-subsystem:console"
LDFLAGS_WINDOW="-subsystem:windows"
LDFLAGS_DEBUG="-debug:full -debugtype:cv"
LDFLAGS_OPTIMIZE="-release"
EXTRA_CFLAGS="-YX"
PATHTYPE=-w
STLIB_LD="lib -nologo"
SHLIB_LD="link -dll -nologo"
SHLIB_LD_LIBS="user32.lib advapi32.lib"
RC="rc"
;;
dgux*)
SHLIB_CFLAGS="-K PIC"
SHLIB_LD="cc -G"
SHLIB_LD_LIBS=""
SHLIB_SUFFIX=".so"
DL_OBJS="tclLoadDl.o"
DL_LIBS="-ldl"
LDFLAGS=""
LD_SEARCH_FLAGS=""
;;
HP-UX-*.08.*|HP-UX-*.09.*|HP-UX-*.10.*|HP-UX-*.11.*)
SHLIB_SUFFIX=".sl"
AC_CHECK_LIB(dld, shl_load, tcl_ok=yes, tcl_ok=no)
if test "$tcl_ok" = yes; then
SHLIB_CFLAGS="+z"
SHLIB_LD="ld -b"
SHLIB_LD_LIBS=""
DL_OBJS="tclLoadShl.o"
DL_LIBS="-ldld"
LDFLAGS="-Wl,-E"
LD_SEARCH_FLAGS='-Wl,+s,+b,${LIB_RUNTIME_DIR}:.'
fi
;;
IRIX-4.*)
SHLIB_CFLAGS="-G 0"
SHLIB_SUFFIX=".a"
SHLIB_LD="echo tclLdAout $CC \{$SHLIB_CFLAGS\} | `pwd`/tclsh -r -G 0"
SHLIB_LD_LIBS='${LIBS}'
DL_OBJS="tclLoadAout.o"
DL_LIBS=""
LDFLAGS="-Wl,-D,08000000"
LD_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}'
SHARED_LIB_SUFFIX='${VERSION}\$\{DBGX\}.a'
;;
IRIX-5.*|IRIX-6.*|IRIX64-6.5*)
SHLIB_CFLAGS=""
SHLIB_LD="ld -n32 -shared -rdata_shared"
SHLIB_LD_LIBS=""
SHLIB_SUFFIX=".so"
DL_OBJS="tclLoadDl.o"
DL_LIBS=""
LD_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}'
if test "$CC" = "gcc" -o `$CC -v 2>&1 | grep -c gcc` != "0" ; then
EXTRA_CFLAGS="-mabi=n32"
LDFLAGS="-mabi=n32"
else
case $system in
IRIX-6.3)
# Use to build 6.2 compatible binaries on 6.3.
EXTRA_CFLAGS="-n32 -D_OLD_TERMIOS"
;;
*)
EXTRA_CFLAGS="-n32"
;;
esac
LDFLAGS="-n32"
fi
;;
IRIX64-6.*)
SHLIB_CFLAGS=""
SHLIB_LD="ld -32 -shared -rdata_shared"
SHLIB_LD_LIBS='${LIBS}'
SHLIB_SUFFIX=".so"
DL_OBJS="tclLoadDl.o"
DL_LIBS=""
LDFLAGS=""
LD_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}'
;;
Linux*)
SHLIB_CFLAGS="-fPIC"
SHLIB_LD_LIBS='${LIBS}'
SHLIB_SUFFIX=".so"
# egcs-2.91.66 on Redhat Linux 6.0 generates lots of warnings
# when you inline the string and math operations. Turn this off to
# get rid of the warnings.
CFLAGS_OPTIMIZE="${CFLAGS_OPTIMIZE} -D__NO_STRING_INLINES -D__NO_MATH_INLINES"
if test "$have_dl" = yes; then
SHLIB_LD="${CC} -shared"
DL_OBJS="tclLoadDl.o"
DL_LIBS="-ldl"
LDFLAGS="-rdynamic"
LD_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}'
else
AC_CHECK_HEADER(dld.h, [
SHLIB_LD="ld -shared"
DL_OBJS="tclLoadDld.o"
DL_LIBS="-ldld"
LDFLAGS=""
LD_SEARCH_FLAGS=""])
fi
if test "`uname -m`" = "alpha" ; then
EXTRA_CFLAGS="-mieee"
fi
;;
MP-RAS-02*)
SHLIB_CFLAGS="-K PIC"
SHLIB_LD="cc -G"
SHLIB_LD_LIBS=""
SHLIB_SUFFIX=".so"
DL_OBJS="tclLoadDl.o"
DL_LIBS="-ldl"
LDFLAGS=""
LD_SEARCH_FLAGS=""
;;
MP-RAS-*)
SHLIB_CFLAGS="-K PIC"
SHLIB_LD="cc -G"
SHLIB_LD_LIBS=""
SHLIB_SUFFIX=".so"
DL_OBJS="tclLoadDl.o"
DL_LIBS="-ldl"
LDFLAGS="-Wl,-Bexport"
LD_SEARCH_FLAGS=""
;;
NetBSD-*|FreeBSD-[[12]].*|OpenBSD-*)
# Not available on all versions: check for include file.
AC_CHECK_HEADER(dlfcn.h, [
SHLIB_CFLAGS="-fpic"
SHLIB_LD="ld -Bshareable -x"
SHLIB_LD_LIBS=""
SHLIB_SUFFIX=".so"
DL_OBJS="tclLoadDl.o"
DL_LIBS=""
LDFLAGS=""
LD_SEARCH_FLAGS=""
SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}\$\{DBGX\}.so.1.0'
], [
SHLIB_CFLAGS=""
SHLIB_LD="echo tclLdAout $CC \{$SHLIB_CFLAGS\} | `pwd`/tclsh -r"
SHLIB_LD_LIBS='${LIBS}'
SHLIB_SUFFIX=".a"
DL_OBJS="tclLoadAout.o"
DL_LIBS=""
LDFLAGS=""
LD_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}'
SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}\$\{DBGX\}.a'
])
# FreeBSD doesn't handle version numbers with dots.
UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}\$\{DBGX\}.a'
TCL_LIB_VERSIONS_OK=nodots
;;
FreeBSD-*)
# FreeBSD 3.* and greater have ELF.
SHLIB_CFLAGS="-fpic"
SHLIB_LD="ld -Bshareable -x"
SHLIB_LD_LIBS=""
SHLIB_SUFFIX=".so"
DL_OBJS="tclLoadDl.o"
DL_LIBS=""
LDFLAGS=""
LD_SEARCH_FLAGS=""
;;
NEXTSTEP-*)
SHLIB_CFLAGS=""
SHLIB_LD="cc -nostdlib -r"
SHLIB_LD_LIBS=""
SHLIB_SUFFIX=".so"
DL_OBJS="tclLoadNext.o"
DL_LIBS=""
LDFLAGS=""
LD_SEARCH_FLAGS=""
;;
OS/390-*)
CFLAGS_OPTIMIZE="" # Optimizer is buggy
AC_DEFINE(_OE_SOCKETS) # needed in sys/socket.h
;;
OSF1-1.0|OSF1-1.1|OSF1-1.2)
# OSF/1 1.[012] from OSF, and derivatives, including Paragon OSF/1
SHLIB_CFLAGS=""
# Hack: make package name same as library name
SHLIB_LD='ld -R -export $@:'
SHLIB_LD_LIBS=""
SHLIB_SUFFIX=".so"
DL_OBJS="tclLoadOSF.o"
DL_LIBS=""
LDFLAGS=""
LD_SEARCH_FLAGS=""
;;
OSF1-1.*)
# OSF/1 1.3 from OSF using ELF, and derivatives, including AD2
SHLIB_CFLAGS="-fpic"
SHLIB_LD="ld -shared"
SHLIB_LD_LIBS=""
SHLIB_SUFFIX=".so"
DL_OBJS="tclLoadDl.o"
DL_LIBS=""
LDFLAGS=""
LD_SEARCH_FLAGS=""
;;
OSF1-V*)
# Digital OSF/1
SHLIB_CFLAGS=""
SHLIB_LD='ld -shared -expect_unresolved "*"'
SHLIB_LD_LIBS=""
SHLIB_SUFFIX=".so"
DL_OBJS="tclLoadDl.o"
DL_LIBS=""
LDFLAGS=""
LD_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}'
;;
RISCos-*)
SHLIB_CFLAGS="-G 0"
SHLIB_LD="echo tclLdAout $CC \{$SHLIB_CFLAGS\} | `pwd`/tclsh -r -G 0"
SHLIB_LD_LIBS='${LIBS}'
SHLIB_SUFFIX=".a"
DL_OBJS="tclLoadAout.o"
DL_LIBS=""
LDFLAGS="-Wl,-D,08000000"
LD_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}'
;;
SCO_SV-3.2*)
# Note, dlopen is available only on SCO 3.2.5 and greater. However,
# this test works, since "uname -s" was non-standard in 3.2.4 and
# below.
SHLIB_CFLAGS="-Kpic -belf"
SHLIB_LD="ld -G"
SHLIB_LD_LIBS=""
SHLIB_SUFFIX=".so"
DL_OBJS="tclLoadDl.o"
DL_LIBS=""
LDFLAGS="-belf -Wl,-Bexport"
LD_SEARCH_FLAGS=""
;;
SINIX*5.4*)
SHLIB_CFLAGS="-K PIC"
SHLIB_LD="cc -G"
SHLIB_LD_LIBS=""
SHLIB_SUFFIX=".so"
DL_OBJS="tclLoadDl.o"
DL_LIBS="-ldl"
LDFLAGS=""
LD_SEARCH_FLAGS=""
;;
SunOS-4*)
SHLIB_CFLAGS="-PIC"
SHLIB_LD="ld"
SHLIB_LD_LIBS=""
SHLIB_SUFFIX=".so"
DL_OBJS="tclLoadDl.o"
DL_LIBS="-ldl"
LDFLAGS=""
LD_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}'
# SunOS can't handle version numbers with dots in them in library
# specs, like -ltcl7.5, so use -ltcl75 instead. Also, it
# requires an extra version number at the end of .so file names.
# So, the library has to have a name like libtcl75.so.1.0
SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}\$\{DBGX\}.so.1.0'
UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}\$\{DBGX\}.a'
TCL_LIB_VERSIONS_OK=nodots
;;
SunOS-5.[[0-6]]*)
SHLIB_CFLAGS="-KPIC"
SHLIB_LD="/usr/ccs/bin/ld -G -z text"
# Note: need the LIBS below, otherwise Tk won't find Tcl's
# symbols when dynamically loaded into tclsh.
SHLIB_LD_LIBS='${LIBS}'
SHLIB_SUFFIX=".so"
DL_OBJS="tclLoadDl.o"
DL_LIBS="-ldl"
LDFLAGS=""
LD_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}'
;;
SunOS-5*)
SHLIB_CFLAGS="-KPIC"
SHLIB_LD="/usr/ccs/bin/ld -G -z text"
LDFLAGS=""
do64bit_ok=no
if test "$do64bit" = "yes" ; then
arch=`isainfo`
if test "$arch" = "sparcv9 sparc" ; then
if test "$CC" != "gcc" -a `$CC -v 2>&1 | grep -c gcc` = "0" ; then
do64bit_ok=yes
EXTRA_CFLAGS="-xarch=v9"
LDFLAGS="-xarch=v9"
else
AC_MSG_WARN("64bit mode not supported using GCC on $system")
fi
else
AC_MSG_WARN("64bit mode only supported sparcv9 system")
fi
fi
# Note: need the LIBS below, otherwise Tk won't find Tcl's
# symbols when dynamically loaded into tclsh.
SHLIB_LD_LIBS='${LIBS}'
SHLIB_SUFFIX=".so"
DL_OBJS="tclLoadDl.o"
DL_LIBS="-ldl"
if test "$CC" = "gcc" -o `$CC -v 2>&1 | grep -c gcc` != "0" ; then
LD_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}'
else
LD_SEARCH_FLAGS='-R ${LIB_RUNTIME_DIR}'
fi
;;
ULTRIX-4.*)
SHLIB_CFLAGS="-G 0"
SHLIB_SUFFIX=".a"
SHLIB_LD="echo tclLdAout $CC \{$SHLIB_CFLAGS\} | `pwd`/tclsh -r -G 0"
SHLIB_LD_LIBS='${LIBS}'
DL_OBJS="tclLoadAout.o"
DL_LIBS=""
LDFLAGS="-Wl,-D,08000000"
LD_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}'
;;
UNIX_SV* | UnixWare-5*)
SHLIB_CFLAGS="-KPIC"
SHLIB_LD="cc -G"
SHLIB_LD_LIBS=""
SHLIB_SUFFIX=".so"
DL_OBJS="tclLoadDl.o"
DL_LIBS="-ldl"
# Some UNIX_SV* systems (unixware 1.1.2 for example) have linkers
# that don't grok the -Bexport option. Test that it does.
hold_ldflags=$LDFLAGS
AC_MSG_CHECKING(for ld accepts -Bexport flag)
LDFLAGS="${LDFLAGS} -Wl,-Bexport"
AC_TRY_LINK(, [int i;], found=yes, found=no)
LDFLAGS=$hold_ldflags
AC_MSG_RESULT($found)
if test $found = yes; then
LDFLAGS="-Wl,-Bexport"
else
LDFLAGS=""
fi
LD_SEARCH_FLAGS=""
;;
esac
if test "$do64bit" = "yes" -a "$do64bit_ok" = "no" ; then
AC_MSG_WARN("64bit support being disabled -- not supported on this platform")
fi
# Step 4: If pseudo-static linking is in use (see K. B. Kenny, "Dynamic
# Loading for Tcl -- What Became of It?". Proc. 2nd Tcl/Tk Workshop,
# New Orleans, LA, Computerized Processes Unlimited, 1994), then we need
# to determine which of several header files defines the a.out file
# format (a.out.h, sys/exec.h, or sys/exec_aout.h). At present, we
# support only a file format that is more or less version-7-compatible.
# In particular,
# - a.out files must begin with `struct exec'.
# - the N_TXTOFF on the `struct exec' must compute the seek address
# of the text segment
# - The `struct exec' must contain a_magic, a_text, a_data, a_bss
# and a_entry fields.
# The following compilation should succeed if and only if either sys/exec.h
# or a.out.h is usable for the purpose.
#
# Note that the modified COFF format used on MIPS Ultrix 4.x is usable; the
# `struct exec' includes a second header that contains information that
# duplicates the v7 fields that are needed.
if test "x$DL_OBJS" = "xtclLoadAout.o" ; then
AC_MSG_CHECKING(sys/exec.h)
AC_TRY_COMPILE([#include <sys/exec.h>],[
struct exec foo;
unsigned long seek;
int flag;
#if defined(__mips) || defined(mips)
seek = N_TXTOFF (foo.ex_f, foo.ex_o);
#else
seek = N_TXTOFF (foo);
#endif
flag = (foo.a_magic == OMAGIC);
return foo.a_text + foo.a_data + foo.a_bss + foo.a_entry;
], tcl_ok=usable, tcl_ok=unusable)
AC_MSG_RESULT($tcl_ok)
if test $tcl_ok = usable; then
AC_DEFINE(USE_SYS_EXEC_H)
else
AC_MSG_CHECKING(a.out.h)
AC_TRY_COMPILE([#include <a.out.h>],[
struct exec foo;
unsigned long seek;
int flag;
#if defined(__mips) || defined(mips)
seek = N_TXTOFF (foo.ex_f, foo.ex_o);
#else
seek = N_TXTOFF (foo);
#endif
flag = (foo.a_magic == OMAGIC);
return foo.a_text + foo.a_data + foo.a_bss + foo.a_entry;
], tcl_ok=usable, tcl_ok=unusable)
AC_MSG_RESULT($tcl_ok)
if test $tcl_ok = usable; then
AC_DEFINE(USE_A_OUT_H)
else
AC_MSG_CHECKING(sys/exec_aout.h)
AC_TRY_COMPILE([#include <sys/exec_aout.h>],[
struct exec foo;
unsigned long seek;
int flag;
#if defined(__mips) || defined(mips)
seek = N_TXTOFF (foo.ex_f, foo.ex_o);
#else
seek = N_TXTOFF (foo);
#endif
flag = (foo.a_midmag == OMAGIC);
return foo.a_text + foo.a_data + foo.a_bss + foo.a_entry;
], tcl_ok=usable, tcl_ok=unusable)
AC_MSG_RESULT($tcl_ok)
if test $tcl_ok = usable; then
AC_DEFINE(USE_SYS_EXEC_AOUT_H)
else
DL_OBJS=""
fi
fi
fi
fi
# Step 5: disable dynamic loading if requested via a command-line switch.
AC_ARG_ENABLE(load, [ --disable-load disallow dynamic loading and "load" command],
[tcl_ok=$enableval], [tcl_ok=yes])
if test "$tcl_ok" = "no"; then
DL_OBJS=""
fi
if test "x$DL_OBJS" != "x" ; then
BUILD_DLTEST="\$(DLTEST_TARGETS)"
else
echo "Can't figure out how to do dynamic loading or shared libraries"
echo "on this system."
SHLIB_CFLAGS=""
SHLIB_LD=""
SHLIB_SUFFIX=""
DL_OBJS="tclLoadNone.o"
DL_LIBS=""
LDFLAGS=""
LD_SEARCH_FLAGS=""
BUILD_DLTEST=""
fi
# If we're running gcc, then change the C flags for compiling shared
# libraries to the right flags for gcc, instead of those for the
# standard manufacturer compiler.
if test "$DL_OBJS" != "tclLoadNone.o" ; then
if test "$CC" = "gcc" -o `$CC -v 2>&1 | grep -c gcc` != "0" ; then
case $system in
AIX-*)
;;
BSD/OS*)
;;
IRIX*)
;;
NetBSD-*|FreeBSD-*|OpenBSD-*)
;;
RISCos-*)
;;
ULTRIX-4.*)
;;
*)
SHLIB_CFLAGS="-fPIC"
;;
esac
fi
fi
if test "$SHARED_LIB_SUFFIX" = "" ; then
SHARED_LIB_SUFFIX='${VERSION}\$\{DBGX\}${SHLIB_SUFFIX}'
fi
if test "$UNSHARED_LIB_SUFFIX" = "" ; then
UNSHARED_LIB_SUFFIX='${VERSION}\$\{DBGX\}.a'
fi
AC_SUBST(STLIB_LD)
AC_SUBST(SHLIB_LD)
AC_SUBST(SHLIB_CFLAGS)
AC_SUBST(SHLIB_LDFLAGS)
AC_SUBST(DL_LIBS)
AC_SUBST(CFLAGS_DEBUG)
AC_SUBST(CFLAGS_OPTIMIZE)
AC_SUBST(LDFLAGS_DEBUG)
AC_SUBST(LDFLAGS_OPTIMIZE)
])
#--------------------------------------------------------------------
# SC_SERIAL_PORT
#
# Determine which interface to use to talk to the serial port.
# Note that #include lines must begin in leftmost column for
# some compilers to recognize them as preprocessor directives.
#
# Arguments:
# none
#
# Results:
#
# Defines only one of the following vars:
# USE_TERMIOS
# USE_TERMIO
# USE_SGTTY
#
#--------------------------------------------------------------------
AC_DEFUN(SC_SERIAL_PORT, [
AC_MSG_CHECKING([termios vs. termio vs. sgtty])
AC_TRY_RUN([
#include <termios.h>
main()
{
struct termios t;
if (tcgetattr(0, &t) == 0) {
cfsetospeed(&t, 0);
t.c_cflag |= PARENB | PARODD | CSIZE | CSTOPB;
return 0;
}
return 1;
}], tk_ok=termios, tk_ok=no, tk_ok=no)
if test $tk_ok = termios; then
AC_DEFINE(USE_TERMIOS)
else
AC_TRY_RUN([
#include <termio.h>
main()
{
struct termio t;
if (ioctl(0, TCGETA, &t) == 0) {
t.c_cflag |= CBAUD | PARENB | PARODD | CSIZE | CSTOPB;
return 0;
}
return 1;
}], tk_ok=termio, tk_ok=no, tk_ok=no)
if test $tk_ok = termio; then
AC_DEFINE(USE_TERMIO)
else
AC_TRY_RUN([
#include <sgtty.h>
main()
{
struct sgttyb t;
if (ioctl(0, TIOCGETP, &t) == 0) {
t.sg_ospeed = 0;
t.sg_flags |= ODDP | EVENP | RAW;
return 0;
}
return 1;
}], tk_ok=sgtty, tk_ok=none, tk_ok=none)
if test $tk_ok = sgtty; then
AC_DEFINE(USE_SGTTY)
fi
fi
fi
AC_MSG_RESULT($tk_ok)
])
#--------------------------------------------------------------------
# SC_MISSING_POSIX_HEADERS
#
# Supply substitutes for missing POSIX header files. Special
# notes:
# - stdlib.h doesn't define strtol, strtoul, or
# strtod insome versions of SunOS
# - some versions of string.h don't declare procedures such
# as strstr
#
# Arguments:
# none
#
# Results:
#
# Defines some of the following vars:
# NO_DIRENT_H
# NO_ERRNO_H
# NO_VALUES_H
# NO_LIMITS_H
# NO_STDLIB_H
# NO_STRING_H
# NO_SYS_WAIT_H
# NO_DLFCN_H
# HAVE_UNISTD_H
# HAVE_SYS_PARAM_H
#
# HAVE_STRING_H ?
#
#--------------------------------------------------------------------
AC_DEFUN(SC_MISSING_POSIX_HEADERS, [
AC_MSG_CHECKING(dirent.h)
AC_TRY_LINK([#include <sys/types.h>
#include <dirent.h>], [
#ifndef _POSIX_SOURCE
# ifdef __Lynx__
/*
* Generate compilation error to make the test fail: Lynx headers
* are only valid if really in the POSIX environment.
*/
missing_procedure();
# endif
#endif
DIR *d;
struct dirent *entryPtr;
char *p;
d = opendir("foobar");
entryPtr = readdir(d);
p = entryPtr->d_name;
closedir(d);
], tcl_ok=yes, tcl_ok=no)
if test $tcl_ok = no; then
AC_DEFINE(NO_DIRENT_H)
fi
AC_MSG_RESULT($tcl_ok)
AC_CHECK_HEADER(errno.h, , AC_DEFINE(NO_ERRNO_H))
AC_CHECK_HEADER(float.h, , AC_DEFINE(NO_FLOAT_H))
AC_CHECK_HEADER(values.h, , AC_DEFINE(NO_VALUES_H))
AC_CHECK_HEADER(limits.h, , AC_DEFINE(NO_LIMITS_H))
AC_CHECK_HEADER(stdlib.h, tcl_ok=1, tcl_ok=0)
AC_EGREP_HEADER(strtol, stdlib.h, , tcl_ok=0)
AC_EGREP_HEADER(strtoul, stdlib.h, , tcl_ok=0)
AC_EGREP_HEADER(strtod, stdlib.h, , tcl_ok=0)
if test $tcl_ok = 0; then
AC_DEFINE(NO_STDLIB_H)
fi
AC_CHECK_HEADER(string.h, tcl_ok=1, tcl_ok=0)
AC_EGREP_HEADER(strstr, string.h, , tcl_ok=0)
AC_EGREP_HEADER(strerror, string.h, , tcl_ok=0)
# See also memmove check below for a place where NO_STRING_H can be
# set and why.
if test $tcl_ok = 0; then
AC_DEFINE(NO_STRING_H)
fi
AC_CHECK_HEADER(sys/wait.h, , AC_DEFINE(NO_SYS_WAIT_H))
AC_CHECK_HEADER(dlfcn.h, , AC_DEFINE(NO_DLFCN_H))
# OS/390 lacks sys/param.h (and doesn't need it, by chance).
AC_HAVE_HEADERS(unistd.h sys/param.h)
])
#--------------------------------------------------------------------
# SC_PATH_X
#
# Locate the X11 header files and the X11 library archive. Try
# the ac_path_x macro first, but if it doesn't find the X stuff
# (e.g. because there's no xmkmf program) then check through
# a list of possible directories. Under some conditions the
# autoconf macro will return an include directory that contains
# no include files, so double-check its result just to be safe.
#
# Arguments:
# none
#
# Results:
#
# Sets the the following vars:
# XINCLUDES
# XLIBSW
#
#--------------------------------------------------------------------
AC_DEFUN(SC_PATH_X, [
AC_PATH_X
not_really_there=""
if test "$no_x" = ""; then
if test "$x_includes" = ""; then
AC_TRY_CPP([#include <X11/XIntrinsic.h>], , not_really_there="yes")
else
if test ! -r $x_includes/X11/Intrinsic.h; then
not_really_there="yes"
fi
fi
fi
if test "$no_x" = "yes" -o "$not_really_there" = "yes"; then
AC_MSG_CHECKING(for X11 header files)
XINCLUDES="# no special path needed"
AC_TRY_CPP([#include <X11/Intrinsic.h>], , XINCLUDES="nope")
if test "$XINCLUDES" = nope; then
dirs="/usr/unsupported/include /usr/local/include /usr/X386/include /usr/X11R6/include /usr/X11R5/include /usr/include/X11R5 /usr/include/X11R4 /usr/openwin/include /usr/X11/include /usr/sww/include"
for i in $dirs ; do
if test -r $i/X11/Intrinsic.h; then
AC_MSG_RESULT($i)
XINCLUDES=" -I$i"
break
fi
done
fi
else
if test "$x_includes" != ""; then
XINCLUDES=-I$x_includes
else
XINCLUDES="# no special path needed"
fi
fi
if test "$XINCLUDES" = nope; then
AC_MSG_RESULT(couldn't find any!)
XINCLUDES="# no include files found"
fi
if test "$no_x" = yes; then
AC_MSG_CHECKING(for X11 libraries)
XLIBSW=nope
dirs="/usr/unsupported/lib /usr/local/lib /usr/X386/lib /usr/X11R6/lib /usr/X11R5/lib /usr/lib/X11R5 /usr/lib/X11R4 /usr/openwin/lib /usr/X11/lib /usr/sww/X11/lib"
for i in $dirs ; do
if test -r $i/libX11.a -o -r $i/libX11.so -o -r $i/libX11.sl; then
AC_MSG_RESULT($i)
XLIBSW="-L$i -lX11"
x_libraries="$i"
break
fi
done
else
if test "$x_libraries" = ""; then
XLIBSW=-lX11
else
XLIBSW="-L$x_libraries -lX11"
fi
fi
if test "$XLIBSW" = nope ; then
AC_CHECK_LIB(Xwindow, XCreateWindow, XLIBSW=-lXwindow)
fi
if test "$XLIBSW" = nope ; then
AC_MSG_RESULT(couldn't find any! Using -lX11.)
XLIBSW=-lX11
fi
])
#--------------------------------------------------------------------
# SC_BLOCKING_STYLE
#
# The statements below check for systems where POSIX-style
# non-blocking I/O (O_NONBLOCK) doesn't work or is unimplemented.
# On these systems (mostly older ones), use the old BSD-style
# FIONBIO approach instead.
#
# Arguments:
# none
#
# Results:
#
# Defines some of the following vars:
# HAVE_SYS_IOCTL_H
# HAVE_SYS_FILIO_H
# USE_FIONBIO
# O_NONBLOCK
#
#--------------------------------------------------------------------
AC_DEFUN(SC_BLOCKING_STYLE, [
AC_CHECK_HEADERS(sys/ioctl.h)
AC_CHECK_HEADERS(sys/filio.h)
AC_MSG_CHECKING([FIONBIO vs. O_NONBLOCK for nonblocking I/O])
if test -f /usr/lib/NextStep/software_version; then
system=NEXTSTEP-`awk '/3/,/3/' /usr/lib/NextStep/software_version`
else
system=`uname -s`-`uname -r`
if test "$?" -ne 0 ; then
system=unknown
else
# Special check for weird MP-RAS system (uname returns weird
# results, and the version is kept in special file).
if test -r /etc/.relid -a "X`uname -n`" = "X`uname -s`" ; then
system=MP-RAS-`awk '{print $3}' /etc/.relid'`
fi
if test "`uname -s`" = "AIX" ; then
system=AIX-`uname -v`.`uname -r`
fi
fi
fi
case $system in
# There used to be code here to use FIONBIO under AIX. However, it
# was reported that FIONBIO doesn't work under AIX 3.2.5. Since
# using O_NONBLOCK seems fine under AIX 4.*, I removed the FIONBIO
# code (JO, 5/31/97).
OSF*)
AC_DEFINE(USE_FIONBIO)
AC_MSG_RESULT(FIONBIO)
;;
SunOS-4*)
AC_DEFINE(USE_FIONBIO)
AC_MSG_RESULT(FIONBIO)
;;
ULTRIX-4.*)
AC_DEFINE(USE_FIONBIO)
AC_MSG_RESULT(FIONBIO)
;;
*)
AC_MSG_RESULT(O_NONBLOCK)
;;
esac
])
#--------------------------------------------------------------------
# SC_HAVE_VFORK
#
# Check to see whether the system provides a vfork kernel call.
# If not, then use fork instead. Also, check for a problem with
# vforks and signals that can cause core dumps if a vforked child
# resets a signal handler. If the problem exists, then use fork
# instead of vfork.
#
# Arguments:
# none
#
# Results:
#
# Defines some of the following vars:
# vfork (=fork)
#
#--------------------------------------------------------------------
AC_DEFUN(SC_HAVE_VFORK, [
AC_TYPE_SIGNAL()
AC_CHECK_FUNC(vfork, tcl_ok=1, tcl_ok=0)
if test "$tcl_ok" = 1; then
AC_MSG_CHECKING([vfork/signal bug]);
AC_TRY_RUN([
#include <stdio.h>
#include <signal.h>
#include <sys/wait.h>
int gotSignal = 0;
sigProc(sig)
int sig;
{
gotSignal = 1;
}
main()
{
int pid, sts;
(void) signal(SIGCHLD, sigProc);
pid = vfork();
if (pid < 0) {
exit(1);
} else if (pid == 0) {
(void) signal(SIGCHLD, SIG_DFL);
_exit(0);
} else {
(void) wait(&sts);
}
exit((gotSignal) ? 0 : 1);
}], tcl_ok=1, tcl_ok=0, tcl_ok=0)
if test "$tcl_ok" = 1; then
AC_MSG_RESULT(ok)
else
AC_MSG_RESULT([buggy, using fork instead])
fi
fi
rm -f core
if test "$tcl_ok" = 0; then
AC_DEFINE(vfork, fork)
fi
])
#--------------------------------------------------------------------
# SC_TIME_HANLDER
#
# Checks how the system deals with time.h, what time structures
# are used on the system, and what fields the structures have.
#
# Arguments:
# none
#
# Results:
#
# Defines some of the following vars:
# USE_DELTA_FOR_TZ
# HAVE_TM_GMTOFF
# HAVE_TM_TZADJ
# HAVE_TIMEZONE_VAR
#
#--------------------------------------------------------------------
AC_DEFUN(SC_TIME_HANDLER, [
AC_CHECK_HEADERS(sys/time.h)
AC_HEADER_TIME
AC_STRUCT_TIMEZONE
AC_MSG_CHECKING([tm_tzadj in struct tm])
AC_TRY_COMPILE([#include <time.h>], [struct tm tm; tm.tm_tzadj;],
[AC_DEFINE(HAVE_TM_TZADJ)
AC_MSG_RESULT(yes)],
AC_MSG_RESULT(no))
AC_MSG_CHECKING([tm_gmtoff in struct tm])
AC_TRY_COMPILE([#include <time.h>], [struct tm tm; tm.tm_gmtoff;],
[AC_DEFINE(HAVE_TM_GMTOFF)
AC_MSG_RESULT(yes)],
AC_MSG_RESULT(no))
#
# Its important to include time.h in this check, as some systems
# (like convex) have timezone functions, etc.
#
have_timezone=no
AC_MSG_CHECKING([long timezone variable])
AC_TRY_COMPILE([#include <time.h>],
[extern long timezone;
timezone += 1;
exit (0);],
[have_timezone=yes
AC_DEFINE(HAVE_TIMEZONE_VAR)
AC_MSG_RESULT(yes)],
AC_MSG_RESULT(no))
#
# On some systems (eg IRIX 6.2), timezone is a time_t and not a long.
#
if test "$have_timezone" = no; then
AC_MSG_CHECKING([time_t timezone variable])
AC_TRY_COMPILE([#include <time.h>],
[extern time_t timezone;
timezone += 1;
exit (0);],
[AC_DEFINE(HAVE_TIMEZONE_VAR)
AC_MSG_RESULT(yes)],
AC_MSG_RESULT(no))
fi
#
# AIX does not have a timezone field in struct tm. When the AIX bsd
# library is used, the timezone global and the gettimeofday methods are
# to be avoided for timezone deduction instead, we deduce the timezone
# by comparing the localtime result on a known GMT value.
#
if test "`uname -s`" = "AIX" ; then
AC_CHECK_LIB(bsd, gettimeofday, libbsd=yes)
if test $libbsd = yes; then
AC_DEFINE(USE_DELTA_FOR_TZ)
fi
fi
])
#--------------------------------------------------------------------
# SC_BUGGY_STRTOD
#
# Under Solaris 2.4, strtod returns the wrong value for the
# terminating character under some conditions. Check for this
# and if the problem exists use a substitute procedure
# "fixstrtod" (provided by Tcl) that corrects the error.
#
# Arguments:
# none
#
# Results:
#
# Might defines some of the following vars:
# strtod (=fixstrtod)
#
#--------------------------------------------------------------------
AC_DEFUN(SC_BUGGY_STRTOD, [
AC_CHECK_FUNC(strtod, tk_strtod=1, tk_strtod=0)
if test "$tk_strtod" = 1; then
AC_MSG_CHECKING([for Solaris 2.4 strtod bug])
AC_TRY_RUN([
extern double strtod();
int main()
{
char *string = "NaN";
char *term;
strtod(string, &term);
if ((term != string) && (term[-1] == 0)) {
exit(1);
}
exit(0);
}], tk_ok=1, tk_ok=0, tk_ok=0)
if test "$tk_ok" = 1; then
AC_MSG_RESULT(ok)
else
AC_MSG_RESULT(buggy)
AC_DEFINE(strtod, fixstrtod)
fi
fi
])
#--------------------------------------------------------------------
# SC_TCL_LINK_LIBS
#
# Search for the libraries needed to link the Tcl shell.
# Things like the math library (-lm) and socket stuff (-lsocket vs.
# -lnsl) are dealt with here.
#
# Arguments:
# Requires the following vars to be set in the Makefile:
# DL_LIBS
# LIBS
# MATH_LIBS
#
# Results:
#
# Subst's the following var:
# TCL_LIBS
# MATH_LIBS
#
# Might append to the following vars:
# LIBS
#
# Might define the following vars:
# HAVE_NET_ERRNO_H
#
#--------------------------------------------------------------------
AC_DEFUN(SC_TCL_LINK_LIBS, [
#--------------------------------------------------------------------
# On a few very rare systems, all of the libm.a stuff is
# already in libc.a. Set compiler flags accordingly.
# Also, Linux requires the "ieee" library for math to work
# right (and it must appear before "-lm").
#--------------------------------------------------------------------
AC_CHECK_FUNC(sin, MATH_LIBS="", MATH_LIBS="-lm")
AC_CHECK_LIB(ieee, main, [MATH_LIBS="-lieee $MATH_LIBS"])
#--------------------------------------------------------------------
# On AIX systems, libbsd.a has to be linked in to support
# non-blocking file IO. This library has to be linked in after
# the MATH_LIBS or it breaks the pow() function. The way to
# insure proper sequencing, is to add it to the tail of MATH_LIBS.
# This library also supplies gettimeofday.
#--------------------------------------------------------------------
libbsd=no
if test "`uname -s`" = "AIX" ; then
AC_CHECK_LIB(bsd, gettimeofday, libbsd=yes)
if test $libbsd = yes; then
MATH_LIBS="$MATH_LIBS -lbsd"
fi
fi
#--------------------------------------------------------------------
# Interactive UNIX requires -linet instead of -lsocket, plus it
# needs net/errno.h to define the socket-related error codes.
#--------------------------------------------------------------------
AC_CHECK_LIB(inet, main, [LIBS="$LIBS -linet"])
AC_CHECK_HEADER(net/errno.h, AC_DEFINE(HAVE_NET_ERRNO_H))
#--------------------------------------------------------------------
# Check for the existence of the -lsocket and -lnsl libraries.
# The order here is important, so that they end up in the right
# order in the command line generated by make. Here are some
# special considerations:
# 1. Use "connect" and "accept" to check for -lsocket, and
# "gethostbyname" to check for -lnsl.
# 2. Use each function name only once: can't redo a check because
# autoconf caches the results of the last check and won't redo it.
# 3. Use -lnsl and -lsocket only if they supply procedures that
# aren't already present in the normal libraries. This is because
# IRIX 5.2 has libraries, but they aren't needed and they're
# bogus: they goof up name resolution if used.
# 4. On some SVR4 systems, can't use -lsocket without -lnsl too.
# To get around this problem, check for both libraries together
# if -lsocket doesn't work by itself.
#--------------------------------------------------------------------
tcl_checkBoth=0
AC_CHECK_FUNC(connect, tcl_checkSocket=0, tcl_checkSocket=1)
if test "$tcl_checkSocket" = 1; then
AC_CHECK_LIB(socket, main, LIBS="$LIBS -lsocket", tcl_checkBoth=1)
fi
if test "$tcl_checkBoth" = 1; then
tk_oldLibs=$LIBS
LIBS="$LIBS -lsocket -lnsl"
AC_CHECK_FUNC(accept, tcl_checkNsl=0, [LIBS=$tk_oldLibs])
fi
AC_CHECK_FUNC(gethostbyname, , AC_CHECK_LIB(nsl, main,
[LIBS="$LIBS -lnsl"]))
# Don't perform the eval of the libraries here because DL_LIBS
# won't be set until we call SC_CONFIG_CFLAGS
TCL_LIBS='${DL_LIBS} ${LIBS} ${MATH_LIBS}'
AC_SUBST(TCL_LIBS)
AC_SUBST(MATH_LIBS)
])
#------------------------------------------------------------------------
# SC_MAKE_LIB --
#
# Generate a line that can be used to build a shared/unshared library
# in a platform independent manner.
#
# Arguments:
# none
#
# Requires:
#
# Results:
#
# Defines the following vars:
# MAKE_LIB Makefile rule for building a library
# MAKE_SHARED_LIB Makefile rule for building a shared library
# MAKE_UNSHARED_LIB Makefile rule for building a static
# library
#------------------------------------------------------------------------
AC_DEFUN(SC_MAKE_LIB, [
case "`uname -s`" in
*win32* | *WIN32* | *CYGWIN_NT*)
if test "${CC-cc}" = "cl"; then
MAKE_STATIC_LIB="\${STLIB_LD} -out:\[$]@ \$(\[$]@_OBJECTS) "
MAKE_SHARED_LIB="\${SHLIB_LD} \${SHLIB_LDFLAGS} \${SHLIB_LD_LIBS} \$(LDFLAGS) -out:\[$]@ \$(\[$]@_OBJECTS) "
fi
;;
*)
MAKE_STATIC_LIB="\${STLIB_LD} \[$]@ \$(\[$]@_OBJECTS)"
MAKE_SHARED_LIB="\${SHLIB_LD} -o \[$]@ \$(\[$]@_OBJECTS) \${SHLIB_LDFLAGS} \${SHLIB_LD_LIBS}"
;;
esac
if test "${SHARED_BUILD}" = "1" ; then
MAKE_LIB=${MAKE_SHARED_LIB}
else
MAKE_LIB=${MAKE_STATIC_LIB}
fi
AC_SUBST(MAKE_LIB)
AC_SUBST(MAKE_SHARED_LIB)
AC_SUBST(MAKE_STATIC_LIB)
])
#------------------------------------------------------------------------
# SC_LIB_SPEC --
#
# Compute the name of an existing object library located in libdir
# from the given base name and produce the appropriate linker flags.
#
# Arguments:
# basename The base name of the library without version
# numbers, extensions, or "lib" prefixes.
# extra_dir Extra directory in which to search for the
# library. This location is used first, then
# $prefix/$exec-prefix, then some defaults.
#
# Requires:
# CYGPATH command used to generate native style paths
#
# Results:
#
# Defines the following vars:
# ${basename}_LIB_NAME The computed library name.
# ${basename}_LIB_SPEC The computed linker flags.
#------------------------------------------------------------------------
AC_DEFUN(SC_LIB_SPEC, [
AC_MSG_CHECKING(for $1 library)
# Look in exec-prefix and prefix for the library. If neither of
# these were specified, look in libdir. It doesn't matter if libdir
# wasn't specified since a search in the unspecified directory will
# fail (NONE/lib)
if test x"${exec_prefix}" != x"NONE" ; then
sc_lib_name_dir="${exec_prefix}/lib"
elif test x"${prefix}" != "NONE" ; then
sc_lib_name_dir="${prefix}/lib"
else
eval "sc_lib_name_dir=${libdir}"
fi
if test x"$2" != x ; then
sc_extra_lib_dir=$2
else
sc_extra_lib_dir=NONE
fi
for i in \
`ls -dr ${sc_extra_lib_dir}/$1[[0-9]]*.lib 2>/dev/null ` \
`ls -dr ${sc_extra_lib_dir}/lib$1[[0-9]]* 2>/dev/null ` \
`ls -dr ${sc_lib_name_dir}/$1[[0-9]]*.lib 2>/dev/null ` \
`ls -dr ${sc_lib_name_dir}/lib$1[[0-9]]* 2>/dev/null ` \
`ls -dr /usr/lib/$1[[0-9]]*.lib 2>/dev/null ` \
`ls -dr /usr/lib/lib$1[[0-9]]* 2>/dev/null ` \
`ls -dr /usr/local/lib/$1[[0-9]]*.lib 2>/dev/null ` \
`ls -dr /usr/local/lib/lib$1[[0-9]]* 2>/dev/null ` ; do
if test -f "$i" ; then
sc_lib_name_dir=`dirname $i`
$1_LIB_NAME=`basename $i`
$1_LIB_PATH_NAME=$i
break
fi
done
case "`uname -s`" in
*win32* | *WIN32* | *CYGWIN_NT*)
$1_LIB_SPEC=\"`${CYGPATH} ${$1_LIB_PATH_NAME}`\"
;;
*)
# Strip off the leading "lib" and trailing ".a" or ".so"
sc_lib_name_lib=`echo ${$1_LIB_NAME}|sed -e 's/^lib//' -e 's/\.[[^.]]*$//'`
$1_LIB_SPEC="-L${sc_lib_name_dir} -l${sc_lib_name_lib}"
;;
esac
if test "x$1_LIB_NAME" = x ; then
AC_MSG_ERROR(not found)
else
AC_MSG_RESULT(${$1_LIB_SPEC})
fi
AC_SUBST($1_LIB_SPEC)
AC_SUBST($1_LIB_NAME)
])
#------------------------------------------------------------------------
# SC_PRIVATE_TCL_HEADERS --
#
# Locate the private Tcl include files
#
# Arguments:
#
# Requires:
# TCL_SRC_DIR Assumes that SC_LOAD_TCLCONFIG has
# already been called.
#
# Results:
#
# Substs the following vars:
# TCL_TOP_DIR_NATIVE
# TCL_GENERIC_DIR_NATIVE
# TCL_UNIX_DIR_NATIVE
# TCL_WIN_DIR_NATIVE
# TCL_BMAP_DIR_NATIVE
# TCL_TOOL_DIR_NATIVE
# TCL_PLATFORM_DIR_NATIVE
# TCL_BIN_DIR_NATIVE
# TCL_INCLUDES
#------------------------------------------------------------------------
AC_DEFUN(SC_PRIVATE_TCL_HEADERS, [
AC_MSG_CHECKING(for Tcl private include files)
case "`uname -s`" in
*win32* | *WIN32* | *CYGWIN_NT*)
TCL_TOP_DIR_NATIVE=\"`${CYGPATH} ${TCL_SRC_DIR}/..`\"
TCL_GENERIC_DIR_NATIVE=\"`${CYGPATH} ${TCL_SRC_DIR}/../generic`\"
TCL_UNIX_DIR_NATIVE=\"`${CYGPATH} ${TCL_SRC_DIR}/../unix`\"
TCL_WIN_DIR_NATIVE=\"`${CYGPATH} ${TCL_SRC_DIR}/../win`\"
TCL_BMAP_DIR_NATIVE=\"`${CYGPATH} ${TCL_SRC_DIR}/../bitmaps`\"
TCL_TOOL_DIR_NATIVE=\"`${CYGPATH} ${TCL_SRC_DIR}/../tools`\"
TCL_COMPAT_DIR_NATIVE=\"`${CYGPATH} ${TCL_SRC_DIR}/../compat`\"
TCL_PLATFORM_DIR_NATIVE=${TCL_WIN_DIR_NATIVE}
;;
*)
TCL_TOP_DIR_NATIVE='$(TCL_SRC_DIR)'
TCL_GENERIC_DIR_NATIVE='$(TCL_TOP_DIR_NATIVE)/generic'
TCL_UNIX_DIR_NATIVE='$(TCL_TOP_DIR_NATIVE)/unix'
TCL_WIN_DIR_NATIVE='$(TCL_TOP_DIR_NATIVE)/win'
TCL_BMAP_DIR_NATIVE='$(TCL_TOP_DIR_NATIVE)/bitmaps'
TCL_TOOL_DIR_NATIVE='$(TCL_TOP_DIR_NATIVE)/tools'
TCL_COMPAT_DIR_NATIVE='$(TCL_TOP_DIR_NATIVE)/compat'
TCL_PLATFORM_DIR_NATIVE=${TCL_UNIX_DIR_NATIVE}
;;
esac
AC_SUBST(TCL_TOP_DIR_NATIVE)
AC_SUBST(TCL_GENERIC_DIR_NATIVE)
AC_SUBST(TCL_UNIX_DIR_NATIVE)
AC_SUBST(TCL_WIN_DIR_NATIVE)
AC_SUBST(TCL_BMAP_DIR_NATIVE)
AC_SUBST(TCL_TOOL_DIR_NATIVE)
AC_SUBST(TCL_PLATFORM_DIR_NATIVE)
TCL_INCLUDES="-I${TCL_GENERIC_DIR_NATIVE} -I${TCL_PLATFORM_DIR_NATIVE}"
AC_SUBST(TCL_INCLUDES)
AC_MSG_RESULT(Using srcdir found in tclConfig.sh)
])
#------------------------------------------------------------------------
# SC_PUBLIC_TCL_HEADERS --
#
# Locate the installed public Tcl header files
#
# Arguments:
# None.
#
# Requires:
# CYGPATH must be set
#
# Results:
#
# Adds a --with-tclinclude switch to configure.
# Result is cached.
#
# Substs the following vars:
# TCL_INCLUDES
#------------------------------------------------------------------------
AC_DEFUN(SC_PUBLIC_TCL_HEADERS, [
AC_MSG_CHECKING(for Tcl public headers)
AC_ARG_WITH(tclinclude, [ --with-tclinclude directory containing the public Tcl header files.], with_tclinclude=${withval})
if test x"${with_tclinclude}" != x ; then
if test -f "${with_tclinclude}/tcl.h" ; then
ac_cv_c_tclh=${with_tclinclude}
else
AC_MSG_ERROR([${with_tclinclude} directory does not contain Tcl public header file tcl.h])
fi
else
AC_CACHE_VAL(ac_cv_c_tclh, [
# Use the value from --with-tclinclude, if it was given
if test x"${with_tclinclude}" != x ; then
ac_cv_c_tclh=${with_tclinclude}
else
# Check in the includedir, if --prefix was specified
eval "temp_includedir=${includedir}"
for i in \
`ls -d ${temp_includedir} 2>/dev/null` \
/usr/local/include /usr/include ; do
if test -f "$i/tcl.h" ; then
ac_cv_c_tclh=$i
break
fi
done
fi
])
fi
# Print a message based on how we determined the include path
if test x"${ac_cv_c_tclh}" = x ; then
AC_MSG_ERROR(tcl.h not found. Please specify its location with --with-tclinclude)
else
AC_MSG_RESULT(${ac_cv_c_tclh})
fi
# Convert to a native path and substitute into the output files.
INCLUDE_DIR_NATIVE=`${CYGPATH} ${ac_cv_c_tclh}`
TCL_INCLUDES=-I\"${INCLUDE_DIR_NATIVE}\"
AC_SUBST(TCL_INCLUDES)
])
#------------------------------------------------------------------------
# SC_PRIVATE_TK_HEADERS --
#
# Locate the private Tk include files
#
# Arguments:
#
# Requires:
# TK_SRC_DIR Assumes that SC_LOAD_TKCONFIG has
# already been called.
#
# Results:
#
# Substs the following vars:
# TK_INCLUDES
#------------------------------------------------------------------------
AC_DEFUN(SC_PRIVATE_TK_HEADERS, [
AC_MSG_CHECKING(for Tk private include files)
case "`uname -s`" in
*win32* | *WIN32* | *CYGWIN_NT*)
TK_UNIX_DIR_NATIVE=\"`${CYGPATH} ${TK_SRC_DIR}/../unix`\"
TK_WIN_DIR_NATIVE=\"`${CYGPATH} ${TK_SRC_DIR}/../win`\"
TK_GENERIC_DIR_NATIVE=\"`${CYGPATH} ${TK_SRC_DIR}/../generic`\"
TK_XLIB_DIR_NATIVE=\"`${CYGPATH} ${TK_SRC_DIR}/../xlib`\"
TK_PLATFORM_DIR_NATIVE=${TK_WIN_DIR_NATIVE}
TK_INCLUDES="-I${TK_GENERIC_DIR_NATIVE} -I${TK_PLATFORM_DIR_NATIVE} -I${TK_XLIB_DIR_NATIVE}"
;;
*)
TK_GENERIC_DIR_NATIVE='$(TK_TOP_DIR_NATIVE)/generic'
TK_UNIX_DIR_NATIVE='$(TK_TOP_DIR_NATIVE)/unix'
TK_WIN_DIR_NATIVE='$(TK_TOP_DIR_NATIVE)/win'
TK_PLATFORM_DIR_NATIVE=${TK_UNIX_DIR_NATIVE}
TK_INCLUDES="-I${TK_GENERIC_DIR_NATIVE} -I${TK_PLATFORM_DIR_NATIVE}"
;;
esac
AC_SUBST(TK_UNIX_DIR_NATIVE)
AC_SUBST(TK_WIN_DIR_NATIVE)
AC_SUBST(TK_GENERIC_DIR_NATIVE)
AC_SUBST(TK_XLIB_DIR_NATIVE)
AC_SUBST(TK_PLATFORM_DIR_NATIVE)
AC_SUBST(TK_INCLUDES)
AC_MSG_RESULT(Using srcdir found in tkConfig.sh)
])
#------------------------------------------------------------------------
# SC_PUBLIC_TK_HEADERS --
#
# Locate the installed public Tk header files
#
# Arguments:
# None.
#
# Requires:
# CYGPATH must be set
#
# Results:
#
# Adds a --with-tkinclude switch to configure.
# Result is cached.
#
# Substs the following vars:
# TK_INCLUDES
#------------------------------------------------------------------------
AC_DEFUN(SC_PUBLIC_TK_HEADERS, [
AC_MSG_CHECKING(for Tk public headers)
AC_ARG_WITH(tkinclude, [ --with-tkinclude directory containing the public Tk header files.], with_tkinclude=${withval})
if test x"${with_tkinclude}" != x ; then
if test -f "${with_tkinclude}/tk.h" ; then
ac_cv_c_tkh=${with_tkinclude}
else
AC_MSG_ERROR([${with_tkinclude} directory does not contain Tk public header file tk.h])
fi
else
AC_CACHE_VAL(ac_cv_c_tkh, [
# Use the value from --with-tkinclude, if it was given
if test x"${with_tkinclude}" != x ; then
ac_cv_c_tkh=${with_tkinclude}
else
# Check in the includedir, if --prefix was specified
eval "temp_includedir=${includedir}"
for i in \
`ls -d ${temp_includedir} 2>/dev/null` \
/usr/local/include /usr/include ; do
if test -f "$i/tk.h" ; then
ac_cv_c_tkh=$i
break
fi
done
fi
])
fi
# Print a message based on how we determined the include path
if test x"${ac_cv_c_tkh}" = x ; then
AC_MSG_ERROR(tk.h not found. Please specify its location with --with-tkinclude)
else
AC_MSG_RESULT(${ac_cv_c_tkh})
fi
# Convert to a native path and substitute into the output files.
INCLUDE_DIR_NATIVE=`${CYGPATH} ${ac_cv_c_tkh}`
TK_INCLUDES=-I\"${INCLUDE_DIR_NATIVE}\"
AC_SUBST(TK_INCLUDES)
])
#------------------------------------------------------------------------
# SC_SIMPLE_EXEEXT
# Select the executable extension based on the host type. This
# is a lightweight replacement for AC_EXEEXT that doesn't require
# a compiler.
#
# Arguments
# none
#
# Results
# Subst's the following values:
# EXEEXT
#------------------------------------------------------------------------
AC_DEFUN(SC_SIMPLE_EXEEXT, [
AC_MSG_CHECKING(executable extension based on host type)
case "`uname -s`" in
*win32* | *WIN32* | *CYGWIN_NT*)
EXEEXT=".exe"
;;
*)
EXEEXT=""
;;
esac
AC_MSG_RESULT(${EXEEXT})
AC_SUBST(EXEEXT)
])
#------------------------------------------------------------------------
# SC_PROG_TCLSH
# Locate a tclsh shell in the following directories:
# ${exec_prefix}/bin
# ${prefix}/bin
# ${TCL_BIN_DIR}
# ${TCL_BIN_DIR}/../bin
# ${PATH}
#
# Arguments
# none
#
# Results
# Subst's the following values:
# TCLSH_PROG
#------------------------------------------------------------------------
AC_DEFUN(SC_PROG_TCLSH, [
AC_MSG_CHECKING([for tclsh])
AC_CACHE_VAL(ac_cv_path_tclsh, [
search_path=`echo ${exec_prefix}/bin:${prefix}/bin:${TCL_BIN_DIR}:${TCL_BIN_DIR}/../bin:${PATH} | sed -e 's/:/ /g'`
for dir in $search_path ; do
for j in `ls -r $dir/tclsh[[8-9]]* 2> /dev/null` \
`ls -r $dir/tclsh* 2> /dev/null` ; do
if test x"$ac_cv_path_tclsh" = x ; then
if test -f "$j" ; then
ac_cv_path_tclsh=$j
break
fi
fi
done
done
])
if test -f "$ac_cv_path_tclsh" ; then
TCLSH_PROG=$ac_cv_path_tclsh
AC_MSG_RESULT($TCLSH_PROG)
else
AC_MSG_ERROR(No tclsh found in PATH: $search_path)
fi
AC_SUBST(TCLSH_PROG)
])
#------------------------------------------------------------------------
# SC_PROG_WISH
# Locate a wish shell in the following directories:
# ${exec_prefix}/bin
# ${prefix}/bin
# ${TCL_BIN_DIR}
# ${TCL_BIN_DIR}/../bin
# ${PATH}
#
# Arguments
# none
#
# Results
# Subst's the following values:
# WISH_PROG
#------------------------------------------------------------------------
AC_DEFUN(SC_PROG_WISH, [
AC_MSG_CHECKING([for wish])
AC_CACHE_VAL(ac_cv_path_wish, [
search_path=`echo ${exec_prefix}/bin:${prefix}/bin:${TCL_BIN_DIR}:${TCL_BIN_DIR}/../bin:${PATH} | sed -e 's/:/ /g'`
for dir in $search_path ; do
for j in `ls -r $dir/wish[[8-9]]* 2> /dev/null` \
`ls -r $dir/wish* 2> /dev/null` ; do
if test x"$ac_cv_path_wish" = x ; then
if test -f "$j" ; then
ac_cv_path_wish=$j
break
fi
fi
done
done
])
if test -f "$ac_cv_path_wish" ; then
WISH_PROG=$ac_cv_path_wish
AC_MSG_RESULT($WISH_PROG)
else
AC_MSG_ERROR(No wish found in PATH: $search_path)
fi
AC_SUBST(WISH_PROG)
])