# tcl.m4 --
#
# This file provides a set of autoconf macros to help TEA-enable
# a Tcl extension.
#
# Copyright (c) 1999-2000 Ajuba Solutions.
# Copyright (c) 2002-2003 ActiveState Corporation.
#
# See the file "license.terms" for information on usage and redistribution
# of this file, and for a DISCLAIMER OF ALL WARRANTIES.
#
# RCS: @(#) $Id: tcl.m4,v 1.3 2004/06/29 10:38:39 patthoyts Exp $
AC_PREREQ(2.50)
#------------------------------------------------------------------------
# TEA_PATH_TCLCONFIG --
#
# Locate the tclConfig.sh file and perform a sanity check on
# the Tcl compile flags
#
# Arguments:
# none
#
# Results:
#
# Adds the following arguments to configure:
# --with-tcl=...
#
# Defines the following vars:
# TCL_BIN_DIR Full path to the directory containing
# the tclConfig.sh file
#------------------------------------------------------------------------
AC_DEFUN(TEA_PATH_TCLCONFIG, [
dnl Make sure we are initialized
AC_REQUIRE([TEA_INIT])
#
# Ok, lets find the tcl configuration
# First, look for one uninstalled.
# the alternative search directory is invoked by --with-tcl
#
if test x"${no_tcl}" = x ; then
# we reset no_tcl in case something fails here
no_tcl=true
AC_ARG_WITH(tcl, [ --with-tcl directory containing tcl configuration (tclConfig.sh)], with_tclconfig=${withval})
AC_MSG_CHECKING([for Tcl configuration])
AC_CACHE_VAL(ac_cv_c_tclconfig,[
# First check to see if --with-tcl was specified.
if test x"${with_tclconfig}" != x ; then
if test -f "${with_tclconfig}/tclConfig.sh" ; then
ac_cv_c_tclconfig=`(cd ${with_tclconfig}; pwd)`
else
AC_MSG_ERROR([${with_tclconfig} directory doesn't contain tclConfig.sh])
fi
fi
# then check for a private Tcl installation
if test x"${ac_cv_c_tclconfig}" = x ; then
for i in \
../tcl \
`ls -dr ../tcl[[8-9]].[[0-9]]* 2>/dev/null` \
../../tcl \
`ls -dr ../../tcl[[8-9]].[[0-9]]* 2>/dev/null` \
../../../tcl \
`ls -dr ../../../tcl[[8-9]].[[0-9]]* 2>/dev/null` ; do
if test -f "$i/unix/tclConfig.sh" ; then
ac_cv_c_tclconfig=`(cd $i/unix; pwd)`
break
fi
done
fi
# check in a few common install locations
if test x"${ac_cv_c_tclconfig}" = x ; then
for i in `ls -d ${exec_prefix}/lib 2>/dev/null` \
`ls -d ${prefix}/lib 2>/dev/null` \
`ls -d /usr/local/lib 2>/dev/null` \
`ls -d /usr/contrib/lib 2>/dev/null` \
`ls -d /usr/lib 2>/dev/null` \
; do
if test -f "$i/tclConfig.sh" ; then
ac_cv_c_tclconfig=`(cd $i; pwd)`
break
fi
done
fi
# check in a few other private locations
if test x"${ac_cv_c_tclconfig}" = x ; then
for i in \
${srcdir}/../tcl \
`ls -dr ${srcdir}/../tcl[[8-9]].[[0-9]]* 2>/dev/null` ; do
if test -f "$i/unix/tclConfig.sh" ; then
ac_cv_c_tclconfig=`(cd $i/unix; pwd)`
break
fi
done
fi
])
if test x"${ac_cv_c_tclconfig}" = x ; then
TCL_BIN_DIR="# no Tcl configs found"
AC_MSG_WARN("Cannot find Tcl configuration definitions")
exit 0
else
no_tcl=
TCL_BIN_DIR=${ac_cv_c_tclconfig}
AC_MSG_RESULT([found $TCL_BIN_DIR/tclConfig.sh])
fi
fi
])
#------------------------------------------------------------------------
# TEA_PATH_TKCONFIG --
#
# Locate the tkConfig.sh file
#
# Arguments:
# none
#
# Results:
#
# Adds the following arguments to configure:
# --with-tk=...
#
# Defines the following vars:
# TK_BIN_DIR Full path to the directory containing
# the tkConfig.sh file
#------------------------------------------------------------------------
AC_DEFUN(TEA_PATH_TKCONFIG, [
#
# Ok, lets find the tk configuration
# First, look for one uninstalled.
# the alternative search directory is invoked by --with-tk
#
if test x"${no_tk}" = x ; then
# we reset no_tk in case something fails here
no_tk=true
AC_ARG_WITH(tk, [ --with-tk directory containing tk configuration (tkConfig.sh)], with_tkconfig=${withval})
AC_MSG_CHECKING([for Tk configuration])
AC_CACHE_VAL(ac_cv_c_tkconfig,[
# First check to see if --with-tkconfig was specified.
if test x"${with_tkconfig}" != x ; then
if test -f "${with_tkconfig}/tkConfig.sh" ; then
ac_cv_c_tkconfig=`(cd ${with_tkconfig}; pwd)`
else
AC_MSG_ERROR([${with_tkconfig} directory doesn't contain tkConfig.sh])
fi
fi
# then check for a private Tk library
if test x"${ac_cv_c_tkconfig}" = x ; then
for i in \
../tk \
`ls -dr ../tk[[8-9]].[[0-9]]* 2>/dev/null` \
../../tk \
`ls -dr ../../tk[[8-9]].[[0-9]]* 2>/dev/null` \
../../../tk \
`ls -dr ../../../tk[[8-9]].[[0-9]]* 2>/dev/null` ; do
if test -f "$i/unix/tkConfig.sh" ; then
ac_cv_c_tkconfig=`(cd $i/unix; pwd)`
break
fi
done
fi
# check in a few common install locations
if test x"${ac_cv_c_tkconfig}" = x ; then
for i in `ls -d ${exec_prefix}/lib 2>/dev/null` \
`ls -d ${prefix}/lib 2>/dev/null` \
`ls -d /usr/local/lib 2>/dev/null` \
`ls -d /usr/contrib/lib 2>/dev/null` \
`ls -d /usr/lib 2>/dev/null` \
; do
if test -f "$i/tkConfig.sh" ; then
ac_cv_c_tkconfig=`(cd $i; pwd)`
break
fi
done
fi
# check in a few other private locations
if test x"${ac_cv_c_tkconfig}" = x ; then
for i in \
${srcdir}/../tk \
`ls -dr ${srcdir}/../tk[[8-9]].[[0-9]]* 2>/dev/null` ; do
if test -f "$i/unix/tkConfig.sh" ; then
ac_cv_c_tkconfig=`(cd $i/unix; pwd)`
break
fi
done
fi
])
if test x"${ac_cv_c_tkconfig}" = x ; then
TK_BIN_DIR="# no Tk configs found"
AC_MSG_WARN("Cannot find Tk configuration definitions")
exit 0
else
no_tk=
TK_BIN_DIR=${ac_cv_c_tkconfig}
AC_MSG_RESULT([found $TK_BIN_DIR/tkConfig.sh])
fi
fi
])
#------------------------------------------------------------------------
# TEA_LOAD_TCLCONFIG --
#
# Load the tclConfig.sh file
#
# Arguments:
#
# Requires the following vars to be set:
# TCL_BIN_DIR
#
# Results:
#
# Subst the following vars:
# TCL_BIN_DIR
# TCL_SRC_DIR
# TCL_LIB_FILE
#
#------------------------------------------------------------------------
AC_DEFUN(TEA_LOAD_TCLCONFIG, [
AC_MSG_CHECKING([for existence of $TCL_BIN_DIR/tclConfig.sh])
if test -f "$TCL_BIN_DIR/tclConfig.sh" ; then
AC_MSG_RESULT([loading])
. $TCL_BIN_DIR/tclConfig.sh
else
AC_MSG_RESULT([file not found])
fi
#
# If the TCL_BIN_DIR is the build directory (not the install directory),
# then set the common variable name to the value of the build variables.
# For example, the variable TCL_LIB_SPEC will be set to the value
# of TCL_BUILD_LIB_SPEC. An extension should make use of TCL_LIB_SPEC
# instead of TCL_BUILD_LIB_SPEC since it will work with both an
# installed and uninstalled version of Tcl.
#
if test -f $TCL_BIN_DIR/Makefile ; then
TCL_LIB_SPEC=${TCL_BUILD_LIB_SPEC}
TCL_STUB_LIB_SPEC=${TCL_BUILD_STUB_LIB_SPEC}
TCL_STUB_LIB_PATH=${TCL_BUILD_STUB_LIB_PATH}
fi
#
# eval is required to do the TCL_DBGX substitution
#
eval "TCL_LIB_FILE=\"${TCL_LIB_FILE}\""
eval "TCL_LIB_FLAG=\"${TCL_LIB_FLAG}\""
eval "TCL_LIB_SPEC=\"${TCL_LIB_SPEC}\""
eval "TCL_STUB_LIB_FILE=\"${TCL_STUB_LIB_FILE}\""
eval "TCL_STUB_LIB_FLAG=\"${TCL_STUB_LIB_FLAG}\""
eval "TCL_STUB_LIB_SPEC=\"${TCL_STUB_LIB_SPEC}\""
AC_SUBST(TCL_VERSION)
AC_SUBST(TCL_BIN_DIR)
AC_SUBST(TCL_SRC_DIR)
AC_SUBST(TCL_LIB_FILE)
AC_SUBST(TCL_LIB_FLAG)
AC_SUBST(TCL_LIB_SPEC)
AC_SUBST(TCL_STUB_LIB_FILE)
AC_SUBST(TCL_STUB_LIB_FLAG)
AC_SUBST(TCL_STUB_LIB_SPEC)
#AC_SUBST(TCL_DBGX)
AC_SUBST(TCL_LIBS)
AC_SUBST(TCL_DEFS)
AC_SUBST(TCL_EXTRA_CFLAGS)
AC_SUBST(TCL_LD_FLAGS)
AC_SUBST(TCL_SHLIB_LD_LIBS)
#AC_SUBST(TCL_BUILD_LIB_SPEC)
#AC_SUBST(TCL_BUILD_STUB_LIB_SPEC)
])
#------------------------------------------------------------------------
# TEA_LOAD_TKCONFIG --
#
# Load the tkConfig.sh file
#
# Arguments:
#
# Requires the following vars to be set:
# TK_BIN_DIR
#
# Results:
#
# Sets the following vars that should be in tkConfig.sh:
# TK_BIN_DIR
#------------------------------------------------------------------------
AC_DEFUN(TEA_LOAD_TKCONFIG, [
AC_MSG_CHECKING([for existence of ${TK_BIN_DIR}/tkConfig.sh])
if test -f "${TK_BIN_DIR}/tkConfig.sh" ; then
AC_MSG_RESULT([loading])
. $TK_BIN_DIR/tkConfig.sh
else
AC_MSG_RESULT([could not find ${TK_BIN_DIR}/tkConfig.sh])
fi
#
# If the TK_BIN_DIR is the build directory (not the install directory),
# then set the common variable name to the value of the build variables.
# For example, the variable TK_LIB_SPEC will be set to the value
# of TK_BUILD_LIB_SPEC. An extension should make use of TK_LIB_SPEC
# instead of TK_BUILD_LIB_SPEC since it will work with both an
# installed and uninstalled version of Tcl.
#
if test -f $TK_BIN_DIR/Makefile ; then
TK_LIB_SPEC=${TK_BUILD_LIB_SPEC}
TK_STUB_LIB_SPEC=${TK_BUILD_STUB_LIB_SPEC}
TK_STUB_LIB_PATH=${TK_BUILD_STUB_LIB_PATH}
fi
#
# eval is required to do the TK_DBGX substitution
#
eval "TK_LIB_FILE=\"${TK_LIB_FILE}\""
eval "TK_LIB_FLAG=\"${TK_LIB_FLAG}\""
eval "TK_LIB_SPEC=\"${TK_LIB_SPEC}\""
eval "TK_STUB_LIB_FILE=\"${TK_STUB_LIB_FILE}\""
eval "TK_STUB_LIB_FLAG=\"${TK_STUB_LIB_FLAG}\""
eval "TK_STUB_LIB_SPEC=\"${TK_STUB_LIB_SPEC}\""
AC_SUBST(TK_VERSION)
AC_SUBST(TK_BIN_DIR)
AC_SUBST(TK_SRC_DIR)
AC_SUBST(TK_LIB_FILE)
AC_SUBST(TK_LIB_FLAG)
AC_SUBST(TK_LIB_SPEC)
AC_SUBST(TK_STUB_LIB_FILE)
AC_SUBST(TK_STUB_LIB_FLAG)
AC_SUBST(TK_STUB_LIB_SPEC)
AC_SUBST(TK_LIBS)
AC_SUBST(TK_XINCLUDES)
])
#------------------------------------------------------------------------
# TEA_ENABLE_SHARED --
#
# Allows the building of shared libraries
#
# Arguments:
# none
#
# Results:
#
# Adds the following arguments to configure:
# --enable-shared=yes|no
#
# Defines the following vars:
# STATIC_BUILD Used for building import/export libraries
# on Windows.
#
# Sets the following vars:
# SHARED_BUILD Value of 1 or 0
#------------------------------------------------------------------------
AC_DEFUN(TEA_ENABLE_SHARED, [
AC_MSG_CHECKING([how to build libraries])
AC_ARG_ENABLE(shared,
[ --enable-shared build and link with shared libraries [--enable-shared]],
[tcl_ok=$enableval], [tcl_ok=yes])
if test "${enable_shared+set}" = set; then
enableval="$enable_shared"
tcl_ok=$enableval
else
tcl_ok=yes
fi
if test "$tcl_ok" = "yes" ; then
AC_MSG_RESULT([shared])
SHARED_BUILD=1
else
AC_MSG_RESULT([static])
SHARED_BUILD=0
AC_DEFINE(STATIC_BUILD)
fi
AC_SUBST(SHARED_BUILD)
])
#------------------------------------------------------------------------
# TEA_ENABLE_THREADS --
#
# Specify if thread support should be enabled. If "yes" is
# specified as an arg (optional), threads are enabled by default.
#
# Arguments:
# none
#
# Results:
#
# Adds the following arguments to configure:
# --enable-threads
#
# Sets the following vars:
# THREADS_LIBS Thread library(s)
#
# Defines the following vars:
# TCL_THREADS
# _REENTRANT
#
#------------------------------------------------------------------------
AC_DEFUN(TEA_ENABLE_THREADS, [
AC_ARG_ENABLE(threads, [ --enable-threads build with threads],
[tcl_ok=$enableval], [tcl_ok=$1])
if test "$tcl_ok" = "yes"; then
TCL_THREADS=1
if test "${TEA_PLATFORM}" != "windows" ; then
# We are always OK on Windows, so check what this platform wants.
AC_DEFINE(USE_THREAD_ALLOC)
AC_DEFINE(_REENTRANT)
AC_DEFINE(_THREAD_SAFE)
AC_CHECK_LIB(pthread,pthread_mutex_init,tcl_ok=yes,tcl_ok=no)
if test "$tcl_ok" = "no"; then
# Check a little harder for __pthread_mutex_init in the
# same library, as some systems hide it there until
# pthread.h is defined. We could alternatively do an
# AC_TRY_COMPILE with pthread.h, but that will work with
# libpthread really doesn't exist, like AIX 4.2.
# [Bug: 4359]
AC_CHECK_LIB(pthread, __pthread_mutex_init,
tcl_ok=yes, tcl_ok=no)
fi
if test "$tcl_ok" = "yes"; then
# The space is needed
THREADS_LIBS=" -lpthread"
else
AC_CHECK_LIB(pthreads, pthread_mutex_init,
tcl_ok=yes, tcl_ok=no)
if test "$tcl_ok" = "yes"; then
# The space is needed
THREADS_LIBS=" -lpthreads"
else
AC_CHECK_LIB(c, pthread_mutex_init,
tcl_ok=yes, tcl_ok=no)
if test "$tcl_ok" = "no"; then
AC_CHECK_LIB(c_r, pthread_mutex_init,
tcl_ok=yes, tcl_ok=no)
if test "$tcl_ok" = "yes"; then
# The space is needed
THREADS_LIBS=" -pthread"
else
TCL_THREADS=0
AC_MSG_WARN("Don t know how to find pthread lib on your system - thread support disabled")
fi
fi
fi
fi
# Does the pthread-implementation provide
# 'pthread_attr_setstacksize' ?
ac_saved_libs=$LIBS
LIBS="$LIBS $THREADS_LIBS"
AC_CHECK_FUNCS(pthread_attr_setstacksize)
LIBS=$ac_saved_libs
AC_CHECK_FUNCS(readdir_r)
fi
else
TCL_THREADS=0
fi
# Do checking message here to not mess up interleaved configure output
AC_MSG_CHECKING([for building with threads])
if test "${TCL_THREADS}" = "1"; then
AC_DEFINE(TCL_THREADS)
AC_MSG_RESULT([yes])
else
AC_MSG_RESULT([no (default)])
fi
# TCL_THREADS sanity checking. See if our request for building with
# threads is the same as the way Tcl was built. If not, warn the user.
case ${TCL_DEFS} in
*THREADS=1*)
if test "${TCL_THREADS}" = "0"; then
AC_MSG_WARN([
Building ${PACKAGE_NAME} without threads enabled, but building against a Tcl
that IS thread-enabled.])
fi
;;
*)
if test "${TCL_THREADS}" = "1"; then
AC_MSG_WARN([
--enable-threads requested, but attempting building against a Tcl
that is NOT thread-enabled.])
fi
;;
esac
AC_SUBST(TCL_THREADS)
])
#------------------------------------------------------------------------
# TEA_ENABLE_SYMBOLS --
#
# Specify if debugging symbols should be used
# Memory (TCL_MEM_DEBUG) debugging can also be enabled.
#
# Arguments:
# none
#
# Requires the following vars to be set:
# CFLAGS_DEBUG
# CFLAGS_OPTIMIZE
# LDFLAGS_DEBUG
# LDFLAGS_OPTIMIZE
#
# Results:
#
# Adds the following arguments to configure:
# --enable-symbols
#
# Defines the following vars:
# CFLAGS_DEFAULT Sets to CFLAGS_DEBUG if true
# Sets to CFLAGS_OPTIMIZE if false
# LDFLAGS_DEFAULT Sets to LDFLAGS_DEBUG if true
# Sets to LDFLAGS_OPTIMIZE if false
# DBGX Debug library extension
#
#------------------------------------------------------------------------
AC_DEFUN(TEA_ENABLE_SYMBOLS, [
dnl Make sure we are initialized
AC_REQUIRE([TEA_CONFIG_CFLAGS])
if test "${TEA_PLATFORM}" = "windows" ; then
tcl_dbgx=d
else
tcl_dbgx=g
fi
AC_MSG_CHECKING([for build with symbols])
AC_ARG_ENABLE(symbols, [ --enable-symbols build with debugging symbols [--disable-symbols]], [tcl_ok=$enableval], [tcl_ok=no])
if test "$tcl_ok" = "no"; then
CFLAGS_DEFAULT="${CFLAGS_OPTIMIZE}"
LDFLAGS_DEFAULT="${LDFLAGS_OPTIMIZE}"
DBGX=""
TCL_DBGX=""
AC_MSG_RESULT([no])
else
CFLAGS_DEFAULT="${CFLAGS_DEBUG}"
LDFLAGS_DEFAULT="${LDFLAGS_DEBUG}"
DBGX=${tcl_dbgx}
TCL_DBGX=${tcl_dbgx}
if test "$tcl_ok" = "yes"; then
AC_MSG_RESULT([yes (standard debugging)])
fi
fi
if test "${TEA_PLATFORM}" != "windows" ; then
LDFLAGS_DEFAULT="${LDFLAGS}"
fi
AC_SUBST(TCL_DBGX)
AC_SUBST(CFLAGS_DEFAULT)
AC_SUBST(LDFLAGS_DEFAULT)
if test "$tcl_ok" = "mem" -o "$tcl_ok" = "all"; then
AC_DEFINE(TCL_MEM_DEBUG)
fi
if test "$tcl_ok" != "yes" -a "$tcl_ok" != "no"; then
if test "$tcl_ok" = "all"; then
AC_MSG_RESULT([enabled symbols mem debugging])
else
AC_MSG_RESULT([enabled $tcl_ok debugging])
fi
fi
])
#------------------------------------------------------------------------
# TEA_ENABLE_LANGINFO --
#
# Allows use of modern nl_langinfo check for better l10n.
# This is only relevant for Unix.
#
# Arguments:
# none
#
# Results:
#
# Adds the following arguments to configure:
# --enable-langinfo=yes|no (default is yes)
#
# Defines the following vars:
# HAVE_LANGINFO Triggers use of nl_langinfo if defined.
#
#------------------------------------------------------------------------
AC_DEFUN(TEA_ENABLE_LANGINFO, [
AC_ARG_ENABLE(langinfo,
[ --enable-langinfo use nl_langinfo if possible to determine
encoding at startup, otherwise use old heuristic],
[langinfo_ok=$enableval], [langinfo_ok=yes])
HAVE_LANGINFO=0
if test "$langinfo_ok" = "yes"; then
if test "$langinfo_ok" = "yes"; then
AC_CHECK_HEADER(langinfo.h,[langinfo_ok=yes],[langinfo_ok=no])
fi
fi
AC_MSG_CHECKING([whether to use nl_langinfo])
if test "$langinfo_ok" = "yes"; then
AC_TRY_COMPILE([#include <langinfo.h>],
[nl_langinfo(CODESET);],[langinfo_ok=yes],[langinfo_ok=no])
if test "$langinfo_ok" = "no"; then
langinfo_ok="no (could not compile with nl_langinfo)";
fi
if test "$langinfo_ok" = "yes"; then
AC_DEFINE(HAVE_LANGINFO)
fi
fi
AC_MSG_RESULT([$langinfo_ok])
])
#--------------------------------------------------------------------
# TEA_CONFIG_CFLAGS
#
# Try to determine the proper flags to pass to the compiler
# for building shared libraries and other such nonsense.
#
# Arguments:
# none
#
# Results:
#
# Defines the following vars:
#
# DL_OBJS - Name of the object file that implements dynamic
# loading for Tcl on this system.
# DL_LIBS - Library file(s) to include in tclsh and other base
# applications in order for the "load" command to work.
# LDFLAGS - Flags to pass to the compiler when linking object
# files into an executable application binary such
# as tclsh.
# LD_SEARCH_FLAGS-Flags to pass to ld, such as "-R /usr/local/tcl/lib",
# that tell the run-time dynamic linker where to look
# for shared libraries such as libtcl.so. Depends on
# the variable LIB_RUNTIME_DIR in the Makefile.
# SHLIB_CFLAGS - Flags to pass to cc when compiling the components
# of a shared library (may request position-independent
# code, among other things).
# SHLIB_LD - Base command to use for combining object files
# into a shared library.
# SHLIB_LD_LIBS - Dependent libraries for the linker to scan when
# creating shared libraries. This symbol typically
# goes at the end of the "ld" commands that build
# shared libraries. The value of the symbol is
# "${LIBS}" if all of the dependent libraries should
# be specified when creating a shared library. If
# dependent libraries should not be specified (as on
# SunOS 4.x, where they cause the link to fail, or in
# general if Tcl and Tk aren't themselves shared
# libraries), then this symbol has an empty string
# as its value.
# SHLIB_SUFFIX - Suffix to use for the names of dynamically loadable
# extensions. An empty string means we don't know how
# to use shared libraries on this platform.
# TCL_LIB_FILE - Name of the file that contains the Tcl library, such
# as libtcl7.8.so or libtcl7.8.a.
# TCL_LIB_SUFFIX -Specifies everything that comes after the "libtcl"
# in the shared library name, using the
# ${PACKAGE_VERSION} variable to put the version in
# the right place. This is used by platforms that
# need non-standard library names.
# Examples: ${PACKAGE_VERSION}.so.1.1 on NetBSD,
# since it needs to have a version after the .so, and
# ${PACKAGE_VERSION}.a on AIX, since the Tcl shared
# library needs to have a .a extension whereas shared
# objects for loadable extensions have a .so
# extension. Defaults to
# ${PACKAGE_VERSION}${SHLIB_SUFFIX}.
# TCL_NEEDS_EXP_FILE -
# 1 means that an export file is needed to link to a
# shared library.
# TCL_EXP_FILE - The name of the installed export / import file which
# should be used to link to the Tcl shared library.
# Empty if Tcl is unshared.
# TCL_BUILD_EXP_FILE -
# The name of the built export / import file which
# should be used to link to the Tcl shared library.
# Empty if Tcl is unshared.
# CFLAGS_DEBUG -
# Flags used when running the compiler in debug mode
# CFLAGS_OPTIMIZE -
# Flags used when running the compiler in optimize mode
# EXTRA_CFLAGS -
# Extra CFLAGS to pass to the compiler
#
# Subst's the following vars:
# DL_LIBS
# CFLAGS_DEBUG
# CFLAGS_OPTIMIZE
# CFLAGS_WARNING
#
# STLIB_LD
# SHLIB_LD
# SHLIB_CFLAGS
# SHLIB_LD_FLAGS
# LDFLAGS_DEBUG
# LDFLAGS_OPTIMIZE
#--------------------------------------------------------------------
AC_DEFUN(TEA_CONFIG_CFLAGS, [
dnl Make sure we are initialized
AC_REQUIRE([TEA_INIT])
# Step 0: Enable 64 bit support?
AC_MSG_CHECKING([if 64bit support is enabled])
AC_ARG_ENABLE(64bit,[ --enable-64bit enable 64bit support (where applicable)], [do64bit=$enableval], [do64bit=no])
AC_MSG_RESULT([$do64bit])
# Step 0.b: Enable Solaris 64 bit VIS support?
AC_MSG_CHECKING([if 64bit Sparc VIS support is requested])
AC_ARG_ENABLE(64bit-vis,[ --enable-64bit-vis enable 64bit Sparc VIS support], [do64bitVIS=$enableval], [do64bitVIS=no])
AC_MSG_RESULT([$do64bitVIS])
if test "$do64bitVIS" = "yes"; then
# Force 64bit on with VIS
do64bit=yes
fi
# Step 0.c: Cross-compiling options for Windows/CE builds?
if test "${TEA_PLATFORM}" = "windows" ; then
AC_MSG_CHECKING([if Windows/CE build is requested])
AC_ARG_ENABLE(wince,[ --enable-wince enable Win/CE support (where applicable)], [doWince=$enableval], [doWince=no])
AC_MSG_RESULT($doWince)
fi
# Step 1: set the variable "system" to hold the name and version number
# for the system. This can usually be done via the "uname" command, but
# there are a few systems, like Next, where this doesn't work.
AC_MSG_CHECKING([system version (for dynamic loading)])
if test -f /usr/lib/NextStep/software_version; then
system=NEXTSTEP-`awk '/3/,/3/' /usr/lib/NextStep/software_version`
else
system=`uname -s`-`uname -r`
if test "$?" -ne 0 ; then
AC_MSG_RESULT([unknown (can't find uname command)])
system=unknown
else
# Special check for weird MP-RAS system (uname returns weird
# results, and the version is kept in special file).
if test -r /etc/.relid -a "X`uname -n`" = "X`uname -s`" ; then
system=MP-RAS-`awk '{print $3}' /etc/.relid'`
fi
if test "`uname -s`" = "AIX" ; then
system=AIX-`uname -v`.`uname -r`
fi
if test "${TEA_PLATFORM}" = "windows" ; then
system=windows
fi
AC_MSG_RESULT([$system])
fi
fi
# Step 2: check for existence of -ldl library. This is needed because
# Linux can use either -ldl or -ldld for dynamic loading.
AC_CHECK_LIB(dl, dlopen, have_dl=yes, have_dl=no)
# Step 3: set configuration options based on system name and version.
do64bit_ok=no
EXTRA_CFLAGS=""
TCL_EXPORT_FILE_SUFFIX=""
UNSHARED_LIB_SUFFIX=""
TCL_TRIM_DOTS='`echo ${PACKAGE_VERSION} | tr -d .`'
ECHO_VERSION='`echo ${PACKAGE_VERSION}`'
TCL_LIB_VERSIONS_OK=ok
CFLAGS_DEBUG=-g
CFLAGS_OPTIMIZE=-O
if test "$GCC" = "yes" ; then
CFLAGS_WARNING="-Wall -Wconversion -Wno-implicit-int"
else
CFLAGS_WARNING=""
fi
TCL_NEEDS_EXP_FILE=0
TCL_BUILD_EXP_FILE=""
TCL_EXP_FILE=""
dnl FIXME: Replace AC_CHECK_PROG with AC_CHECK_TOOL once cross compiling is fixed.
dnl AC_CHECK_TOOL(AR, ar, :)
AC_CHECK_PROG(AR, ar, ar)
STLIB_LD='${AR} cr'
LD_LIBRARY_PATH_VAR="LD_LIBRARY_PATH"
case $system in
windows)
# This is a 2-stage check to make sure we have the 64-bit SDK
# We have to know where the SDK is installed.
if test "$do64bit" = "yes" ; then
if test "x${MSSDK}x" = "xx" ; then
MSSDK="C:/Progra~1/Microsoft SDK"
fi
# In order to work in the tortured autoconf environment,
# we need to ensure that this path has no spaces
MSSDK=`cygpath -w -s "$MSSDK" | sed -e 's!\\\!/!g'`
if test ! -d "${MSSDK}/bin/win64" ; then
AC_MSG_WARN("could not find 64-bit SDK to enable 64bit mode")
do64bit="no"
else
do64bit_ok="yes"
fi
fi
if test "$doWince" != "no" ; then
if test "$do64bit" = "yes" ; then
AC_MSG_ERROR([Windows/CE and 64-bit builds incompatible])
fi
if test "$GCC" = "yes" ; then
AC_MSG_ERROR([Windows/CE and GCC builds incompatible])
fi
TEA_PATH_CELIB
# set defaults
# Currently Tcl requires 300+
CEVERSION=300; # could be 211 300 301 ...
TARGETCPU=ARM; # could be ARM MIPS SH3 X86 ...
PLATFORM="Pocket PC 2002"
if test "$doWince" = "yes"; then
doWince="300,ARM,ARM,Pocket PC 2002"
fi
eval `echo $doWince | awk -F "," '{ \
if (length([$]1)) { printf "CEVERSION=%s\n", [$]1 }; \
if (length([$]2)) { printf "TARGETCPU=%s\n", toupper([$]2) }; \
if (length([$]3)) { printf "ARCH=%s\n", toupper([$]3) }; \
if (length([$]4)) { printf "PLATFORM=%s\n", [$]4 }; \
}'`
OSVERSION=WCE$CEVERSION;
if test "x${ARCH}" = "x" ; then
ARCH=$TARGETCPU; # could be ARM MIPS SH3 X86 X86EM ...
fi
if test "x${WCEROOT}" = "x" ; then
WCEROOT="C:/Program Files/Microsoft eMbedded Tools"
fi
if test "x${SDKROOT}" = "x" ; then
SDKROOT="C:/Windows CE Tools"
fi
# In order to work in the tortured autoconf environment,
# we need to ensure that this path has no spaces
WCEROOT=`cygpath -w -s "$WCEROOT" | sed -e 's!\\\!/!g'`
SDKROOT=`cygpath -w -s "$SDKROOT" | sed -e 's!\\\!/!g'`
CELIB_DIR=`cygpath -w -s "$CELIB_DIR" | sed -e 's!\\\!/!g'`
if test ! -d "${SDKROOT}/${OSVERSION}/${PLATFORM}/Lib/${TARGETCPU}" \
-o ! -d "${WCEROOT}/EVC/${OSVERSION}/bin"; then
AC_MSG_ERROR([could not find PocketPC SDK or target compiler to enable WinCE mode [$CEVERSION,$TARGETCPU,$ARCH,$PLATFORM]])
doWince="no"
else
CEINCLUDE=`cygpath -w -s "${SDKROOT}/${OSVERSION}/${PLATFORM}/include" | sed -e 's!\\\!/!g'`
CELIBPATH=`cygpath -w -s "${SDKROOT}/${OSVERSION}/${PLATFORM}/Lib/${TARGETCPU}" | sed -e 's!\\\!/!g'`
fi
fi
if test "$GCC" != "yes" ; then
if test "${SHARED_BUILD}" = "0" ; then
runtime=-MT
else
runtime=-MD
fi
if test "$do64bit" = "yes" ; then
# All this magic is necessary for the Win64 SDK RC1 - hobbs
export CC="${MSSDK}/Bin/Win64/cl.exe \
-I${MSSDK}/Include/prerelease \
-I${MSSDK}/Include/Win64/crt \
-I${MSSDK}/Include"
export RC="${MSSDK}/bin/rc.exe"
export lflags="-MACHINE:IA64 -LIBPATH:${MSSDK}/Lib/IA64 \
-LIBPATH:${MSSDK}/Lib/Prerelease/IA64"
export STLIB_LD="${MSSDK}/bin/win64/lib.exe -nologo ${lflags}"
export LINKBIN="${MSSDK}/bin/win64/link.exe ${lflags}"
CFLAGS_DEBUG="-nologo -Zi -Od -W3 ${runtime}d"
CFLAGS_OPTIMIZE="-nologo -O2 -Gs -W2 ${runtime}"
elif test "$doWince" != "no" ; then
if test "${TARGETCPU}" = "X86"; then
CC="${WCEROOT}/EVC/${OSVERSION}/bin/cl.exe -I\"${CELIB_DIR}/inc\" -I\"${CEINCLUDE}\""
else
CC="${WCEROOT}/EVC/${OSVERSION}/bin/cl${TARGETCPU}.exe -I\"${CELIB_DIR}/inc\" -I\"${CEINCLUDE}\""
fi
RC="${WCEROOT}/Common/EVC/bin/rc.exe"
cpulower=`echo ${TARGETCPU} | awk '{print tolower([$]0)}'`
defs="${TARGETCPU} _${TARGETCPU}_ ${cpulower} _${cpulower}_ POCKET_SIZE PALM_SIZE _MT _DLL _WINDOWS"
for i in $defs ; do
AC_DEFINE_UNQUOTED($i)
done
AC_DEFINE_UNQUOTED(_WIN32_WCE, $CEVERSION)
AC_DEFINE_UNQUOTED(UNDER_CE, $CEVERSION)
CFLAGS_DEBUG="-nologo -Zi -Od"
CFLAGS_OPTIMIZE="-nologo -Ox"
lflags="-MACHINE:${TARGETCPU} -LIBPATH:\"${CELIBPATH}\" -subsystem:windowsce,3.00"
STLIB_LD="${WCEROOT}/EVC/${OSVERSION}/bin/lib.exe -nologo ${lflags}"
LINKBIN="${WCEROOT}/EVC/${OSVERSION}/bin/link.exe ${lflags}"
else
RC="rc"
STLIB_LD="lib -nologo"
LINKBIN="link -link50compat"
CFLAGS_DEBUG="-nologo -Z7 -Od -W3 -WX ${runtime}d"
CFLAGS_OPTIMIZE="-nologo -O2 -Gs -GD -W2 ${runtime}"
fi
fi
if test "$GCC" = "yes"; then
# mingw gcc mode
RC="windres"
CFLAGS_DEBUG="-g"
CFLAGS_OPTIMIZE="-O2"
SHLIB_LD="$CC -shared"
UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}\$\{DBGX\}.a'
LDFLAGS_CONSOLE="-wl,--subsystem,console ${lflags}"
LDFLAGS_WINDOW="-wl,--subsystem,windows ${lflags}"
else
SHLIB_LD="${LINKBIN} -dll -nologo"
UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}\$\{DBGX\}.lib'
EXTRA_CFLAGS="-YX"
PATHTYPE=-w
# For information on what debugtype is most useful, see:
# http://msdn.microsoft.com/library/en-us/dnvc60/html/gendepdebug.asp
# This essentially turns it all on.
LDFLAGS_DEBUG="-debug:full -debugtype:both -warn:2"
LDFLAGS_OPTIMIZE="-release"
if test "$doWince" != "no" ; then
LDFLAGS_CONSOLE="-link ${lflags}"
LDFLAGS_WINDOW=${LDFLAGS_CONSOLE}
else
LDFLAGS_CONSOLE="-link -subsystem:console ${lflags}"
LDFLAGS_WINDOW="-link -subsystem:windows ${lflags}"
fi
fi
SHLIB_LD_LIBS='${LIBS}'
SHLIB_SUFFIX=".dll"
SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}\$\{DBGX\}.dll'
TCL_LIB_VERSIONS_OK=nodots
# Bogus to avoid getting this turned off
DL_OBJS="tclLoadNone.obj"
;;
AIX-*)
if test "${TCL_THREADS}" = "1" -a "$GCC" != "yes" ; then
# AIX requires the _r compiler when gcc isn't being used
if test "${CC}" != "cc_r" ; then
CC=${CC}_r
fi
AC_MSG_RESULT([Using $CC for compiling with threads])
fi
LIBS="$LIBS -lc"
SHLIB_CFLAGS=""
SHLIB_SUFFIX=".so"
SHLIB_LD_LIBS='${LIBS}'
DL_OBJS="tclLoadDl.o"
LDFLAGS=""
LD_LIBRARY_PATH_VAR="LIBPATH"
# AIX v<=4.1 has some different flags than 4.2+
if test "$system" = "AIX-4.1" -o "`uname -v`" -lt "4" ; then
#LIBOBJS="$LIBOBJS tclLoadAix.o"
AC_LIBOBJ([tclLoadAix])
DL_LIBS="-lld"
fi
# Check to enable 64-bit flags for compiler/linker on AIX 4+
if test "$do64bit" = "yes" -a "`uname -v`" -gt "3" ; then
if test "$GCC" = "yes" ; then
AC_MSG_WARN("64bit mode not supported with GCC on $system")
else
do64bit_ok=yes
EXTRA_CFLAGS="-q64"
LDFLAGS="-q64"
RANLIB="${RANLIB} -X64"
AR="${AR} -X64"
SHLIB_LD_FLAGS="-b64"
fi
fi
if test "`uname -m`" = "ia64" ; then
# AIX-5 uses ELF style dynamic libraries on IA-64, but not PPC
SHLIB_LD="/usr/ccs/bin/ld -G -z text"
# AIX-5 has dl* in libc.so
DL_LIBS=""
if test "$GCC" = "yes" ; then
LD_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}'
else
LD_SEARCH_FLAGS='-R${LIB_RUNTIME_DIR}'
fi
else
SHLIB_LD="${TCL_SRC_DIR}/unix/ldAix /bin/ld -bhalt:4 -bM:SRE -bE:lib.exp -H512 -T512 -bnoentry ${SHLIB_LD_FLAGS}"
DL_LIBS="-ldl"
LD_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}'
TCL_NEEDS_EXP_FILE=1
TCL_EXPORT_FILE_SUFFIX='${PACKAGE_VERSION}\$\{DBGX\}.exp'
fi
# On AIX <=v4 systems, libbsd.a has to be linked in to support
# non-blocking file IO. This library has to be linked in after
# the MATH_LIBS or it breaks the pow() function. The way to
# insure proper sequencing, is to add it to the tail of MATH_LIBS.
# This library also supplies gettimeofday.
#
# AIX does not have a timezone field in struct tm. When the AIX
# bsd library is used, the timezone global and the gettimeofday
# methods are to be avoided for timezone deduction instead, we
# deduce the timezone by comparing the localtime result on a
# known GMT value.
AC_CHECK_LIB(bsd, gettimeofday, libbsd=yes, libbsd=no)
if test $libbsd = yes; then
MATH_LIBS="$MATH_LIBS -lbsd"
AC_DEFINE(USE_DELTA_FOR_TZ)
fi
;;
BSD/OS-2.1*|BSD/OS-3*)
SHLIB_CFLAGS=""
SHLIB_LD="shlicc -r"
SHLIB_LD_LIBS='${LIBS}'
SHLIB_SUFFIX=".so"
DL_OBJS="tclLoadDl.o"
DL_LIBS="-ldl"
LDFLAGS=""
LD_SEARCH_FLAGS=""
;;
BSD/OS-4.*)
SHLIB_CFLAGS="-export-dynamic -fPIC"
SHLIB_LD="cc -shared"
SHLIB_LD_LIBS='${LIBS}'
SHLIB_SUFFIX=".so"
DL_OBJS="tclLoadDl.o"
DL_LIBS="-ldl"
LDFLAGS="-export-dynamic"
LD_SEARCH_FLAGS=""
;;
dgux*)
SHLIB_CFLAGS="-K PIC"
SHLIB_LD="cc -G"
SHLIB_LD_LIBS=""
SHLIB_SUFFIX=".so"
DL_OBJS="tclLoadDl.o"
DL_LIBS="-ldl"
LDFLAGS=""
LD_SEARCH_FLAGS=""
;;
HP-UX-*.11.*)
# Use updated header definitions where possible
AC_DEFINE(_XOPEN_SOURCE_EXTENDED)
SHLIB_SUFFIX=".sl"
AC_CHECK_LIB(dld, shl_load, tcl_ok=yes, tcl_ok=no)
if test "$tcl_ok" = yes; then
SHLIB_CFLAGS="+z"
SHLIB_LD="ld -b"
SHLIB_LD_LIBS='${LIBS}'
DL_OBJS="tclLoadShl.o"
DL_LIBS="-ldld"
LDFLAGS="-Wl,-E"
LD_SEARCH_FLAGS='-Wl,+s,+b,${LIB_RUNTIME_DIR}:.'
fi
LD_LIBRARY_PATH_VAR="SHLIB_PATH"
# Users may want PA-RISC 1.1/2.0 portable code - needs HP cc
#EXTRA_CFLAGS="+DAportable"
# Check to enable 64-bit flags for compiler/linker
if test "$do64bit" = "yes" ; then
if test "$GCC" = "yes" ; then
hpux_arch=`${CC} -dumpmachine`
case $hpux_arch in
hppa64*)
# 64-bit gcc in use. Fix flags for GNU ld.
do64bit_ok=yes
SHLIB_LD="${CC} -shared"
SHLIB_LD_LIBS=""
LD_SEARCH_FLAGS=''
;;
*)
AC_MSG_WARN("64bit mode not supported with GCC on $system")
;;
esac
else
do64bit_ok=yes
if test "`uname -m`" = "ia64" ; then
EXTRA_CFLAGS="+DD64"
LDFLAGS="+DD64 $LDFLAGS"
else
EXTRA_CFLAGS="+DA2.0W"
LDFLAGS="+DA2.0W $LDFLAGS"
fi
fi
fi
;;
HP-UX-*.08.*|HP-UX-*.09.*|HP-UX-*.10.*)
SHLIB_SUFFIX=".sl"
AC_CHECK_LIB(dld, shl_load, tcl_ok=yes, tcl_ok=no)
if test "$tcl_ok" = yes; then
SHLIB_CFLAGS="+z"
SHLIB_LD="ld -b"
SHLIB_LD_LIBS=""
DL_OBJS="tclLoadShl.o"
DL_LIBS="-ldld"
LDFLAGS="-Wl,-E"
LD_SEARCH_FLAGS='-Wl,+s,+b,${LIB_RUNTIME_DIR}:.'
fi
LD_LIBRARY_PATH_VAR="SHLIB_PATH"
;;
IRIX-4.*)
SHLIB_CFLAGS="-G 0"
SHLIB_SUFFIX=".a"
SHLIB_LD="echo tclLdAout $CC \{$SHLIB_CFLAGS\} | `pwd`/tclsh -r -G 0"
SHLIB_LD_LIBS='${LIBS}'
DL_OBJS="tclLoadAout.o"
DL_LIBS=""
LDFLAGS="-Wl,-D,08000000"
LD_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}'
SHARED_LIB_SUFFIX='${PACKAGE_VERSION}\$\{DBGX\}.a'
;;
IRIX-5.*)
SHLIB_CFLAGS=""
SHLIB_LD="ld -shared -rdata_shared"
SHLIB_LD_LIBS='${LIBS}'
SHLIB_SUFFIX=".so"
DL_OBJS="tclLoadDl.o"
DL_LIBS=""
LD_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}'
EXTRA_CFLAGS=""
LDFLAGS=""
;;
IRIX-6.*|IRIX64-6.5*)
SHLIB_CFLAGS=""
SHLIB_LD="ld -n32 -shared -rdata_shared"
SHLIB_LD_LIBS='${LIBS}'
SHLIB_SUFFIX=".so"
DL_OBJS="tclLoadDl.o"
DL_LIBS=""
LD_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}'
if test "$GCC" = "yes" ; then
EXTRA_CFLAGS="-mabi=n32"
LDFLAGS="-mabi=n32"
else
case $system in
IRIX-6.3)
# Use to build 6.2 compatible binaries on 6.3.
EXTRA_CFLAGS="-n32 -D_OLD_TERMIOS"
;;
*)
EXTRA_CFLAGS="-n32"
;;
esac
LDFLAGS="-n32"
fi
;;
IRIX64-6.*)
SHLIB_CFLAGS=""
SHLIB_LD="ld -n32 -shared -rdata_shared"
SHLIB_LD_LIBS='${LIBS}'
SHLIB_SUFFIX=".so"
DL_OBJS="tclLoadDl.o"
DL_LIBS=""
LDFLAGS=""
LD_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}'
# Check to enable 64-bit flags for compiler/linker
if test "$do64bit" = "yes" ; then
if test "$GCC" = "yes" ; then
AC_MSG_WARN([64bit mode not supported by gcc])
else
do64bit_ok=yes
SHLIB_LD="ld -64 -shared -rdata_shared"
EXTRA_CFLAGS="-64"
LDFLAGS="-64"
fi
fi
;;
Linux*)
SHLIB_CFLAGS="-fPIC"
SHLIB_LD_LIBS='${LIBS}'
SHLIB_SUFFIX=".so"
# egcs-2.91.66 on Redhat Linux 6.0 generates lots of warnings
# when you inline the string and math operations. Turn this off to
# get rid of the warnings.
#CFLAGS_OPTIMIZE="${CFLAGS_OPTIMIZE} -D__NO_STRING_INLINES -D__NO_MATH_INLINES"
if test "$have_dl" = yes; then
SHLIB_LD="${CC} -shared"
DL_OBJS="tclLoadDl.o"
DL_LIBS="-ldl"
LDFLAGS="-rdynamic"
LD_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}'
else
AC_CHECK_HEADER(dld.h, [
SHLIB_LD="ld -shared"
DL_OBJS="tclLoadDld.o"
DL_LIBS="-ldld"
LDFLAGS=""
LD_SEARCH_FLAGS=""])
fi
if test "`uname -m`" = "alpha" ; then
EXTRA_CFLAGS="-mieee"
fi
# The combo of gcc + glibc has a bug related
# to inlining of functions like strtod(). The
# -fno-builtin flag should address this problem
# but it does not work. The -fno-inline flag
# is kind of overkill but it works.
# Disable inlining only when one of the
# files in compat/*.c is being linked in.
if test x"${USE_COMPAT}" != x ; then
EXTRA_CFLAGS="${EXTRA_CFLAGS} -fno-inline"
fi
;;
GNU*)
SHLIB_CFLAGS="-fPIC"
SHLIB_LD_LIBS='${LIBS}'
SHLIB_SUFFIX=".so"
if test "$have_dl" = yes; then
SHLIB_LD="${CC} -shared"
DL_OBJS=""
DL_LIBS="-ldl"
LDFLAGS="-rdynamic"
LD_SEARCH_FLAGS=""
else
AC_CHECK_HEADER(dld.h, [
SHLIB_LD="ld -shared"
DL_OBJS=""
DL_LIBS="-ldld"
LDFLAGS=""
LD_SEARCH_FLAGS=""])
fi
if test "`uname -m`" = "alpha" ; then
EXTRA_CFLAGS="-mieee"
fi
;;
MP-RAS-02*)
SHLIB_CFLAGS="-K PIC"
SHLIB_LD="cc -G"
SHLIB_LD_LIBS=""
SHLIB_SUFFIX=".so"
DL_OBJS="tclLoadDl.o"
DL_LIBS="-ldl"
LDFLAGS=""
LD_SEARCH_FLAGS=""
;;
MP-RAS-*)
SHLIB_CFLAGS="-K PIC"
SHLIB_LD="cc -G"
SHLIB_LD_LIBS=""
SHLIB_SUFFIX=".so"
DL_OBJS="tclLoadDl.o"
DL_LIBS="-ldl"
LDFLAGS="-Wl,-Bexport"
LD_SEARCH_FLAGS=""
;;
NetBSD-*|FreeBSD-[[1-2]].*)
# Not available on all versions: check for include file.
AC_CHECK_HEADER(dlfcn.h, [
# NetBSD/SPARC needs -fPIC, -fpic will not do.
SHLIB_CFLAGS="-fPIC"
SHLIB_LD="ld -Bshareable -x"
SHLIB_LD_LIBS=""
SHLIB_SUFFIX=".so"
DL_OBJS="tclLoadDl.o"
DL_LIBS=""
LDFLAGS=""
LD_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}'
AC_MSG_CHECKING([for ELF])
AC_EGREP_CPP(yes, [
#ifdef __ELF__
yes
#endif
],
AC_MSG_RESULT([yes])
SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}\$\{DBGX\}.so',
AC_MSG_RESULT([no])
SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}\$\{DBGX\}.so.1.0'
)
], [
SHLIB_CFLAGS=""
SHLIB_LD="echo tclLdAout $CC \{$SHLIB_CFLAGS\} | `pwd`/tclsh -r"
SHLIB_LD_LIBS='${LIBS}'
SHLIB_SUFFIX=".a"
DL_OBJS="tclLoadAout.o"
DL_LIBS=""
LDFLAGS=""
LD_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}'
SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}\$\{DBGX\}.a'
])
# FreeBSD doesn't handle version numbers with dots.
UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}\$\{DBGX\}.a'
TCL_LIB_VERSIONS_OK=nodots
;;
OpenBSD-*)
SHLIB_LD="${CC} -shared"
SHLIB_LD_LIBS='${LIBS}'
SHLIB_SUFFIX=".so"
DL_OBJS="tclLoadDl.o"
DL_LIBS=""
LDFLAGS=""
LD_SEARCH_FLAGS=""
AC_MSG_CHECKING(for ELF)
AC_EGREP_CPP(yes, [
#ifdef __ELF__
yes
#endif
],
[AC_MSG_RESULT(yes)
SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}\$\{DBGX\}.so.1.0'],
[AC_MSG_RESULT(no)
SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}\$\{DBGX\}.so.1.0']
)
# OpenBSD doesn't do version numbers with dots.
UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}\$\{DBGX\}.a'
TCL_LIB_VERSIONS_OK=nodots
;;
FreeBSD-*)
# FreeBSD 3.* and greater have ELF.
SHLIB_CFLAGS="-fPIC"
SHLIB_LD="ld -Bshareable -x"
SHLIB_LD_LIBS='${LIBS}'
SHLIB_SUFFIX=".so"
DL_OBJS="tclLoadDl.o"
DL_LIBS=""
LDFLAGS="-export-dynamic"
LD_SEARCH_FLAGS='-Wl,-rpath,${LIB_RUNTIME_DIR}'
if test "${TCL_THREADS}" = "1" ; then
# The -pthread needs to go in the CFLAGS, not LIBS
LIBS=`echo $LIBS | sed s/-pthread//`
EXTRA_CFLAGS="-pthread"
LDFLAGS="$LDFLAGS -pthread"
fi
case $system in
FreeBSD-3.*)
# FreeBSD-3 doesn't handle version numbers with dots.
UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}\$\{DBGX\}.a'
SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}\$\{DBGX\}.so'
TCL_LIB_VERSIONS_OK=nodots
;;
esac
;;
Rhapsody-*|Darwin-*)
SHLIB_CFLAGS="-fno-common"
SHLIB_LD="cc -dynamiclib \${LDFLAGS}"
TCL_SHLIB_LD_EXTRAS="-compatibility_version ${TCL_MAJOR_VERSION} -current_version \${PACKAGE_VERSION} -install_name \${LIB_RUNTIME_DIR}/\${TCL_LIB_FILE} -prebind -seg1addr 0xa000000"
SHLIB_LD_LIBS='${LIBS}'
SHLIB_SUFFIX=".dylib"
DL_OBJS="tclLoadDyld.o"
DL_LIBS=""
LDFLAGS="-prebind"
LD_SEARCH_FLAGS=""
LD_LIBRARY_PATH_VAR="DYLD_LIBRARY_PATH"
CFLAGS_OPTIMIZE="-O3"
EXTRA_CFLAGS="-arch ppc -pipe"
;;
NEXTSTEP-*)
SHLIB_CFLAGS=""
SHLIB_LD="cc -nostdlib -r"
SHLIB_LD_LIBS=""
SHLIB_SUFFIX=".so"
DL_OBJS="tclLoadNext.o"
DL_LIBS=""
LDFLAGS=""
LD_SEARCH_FLAGS=""
;;
OS/390-*)
CFLAGS_OPTIMIZE="" # Optimizer is buggy
AC_DEFINE(_OE_SOCKETS) # needed in sys/socket.h
;;
OSF1-1.0|OSF1-1.1|OSF1-1.2)
# OSF/1 1.[012] from OSF, and derivatives, including Paragon OSF/1
SHLIB_CFLAGS=""
# Hack: make package name same as library name
SHLIB_LD='ld -R -export $@:'
SHLIB_LD_LIBS=""
SHLIB_SUFFIX=".so"
DL_OBJS="tclLoadOSF.o"
DL_LIBS=""
LDFLAGS=""
LD_SEARCH_FLAGS=""
;;
OSF1-1.*)
# OSF/1 1.3 from OSF using ELF, and derivatives, including AD2
SHLIB_CFLAGS="-fPIC"
if test "$SHARED_BUILD" = "1" ; then
SHLIB_LD="ld -shared"
else
SHLIB_LD="ld -non_shared"
fi
SHLIB_LD_LIBS=""
SHLIB_SUFFIX=".so"
DL_OBJS="tclLoadDl.o"
DL_LIBS=""
LDFLAGS=""
LD_SEARCH_FLAGS=""
;;
OSF1-V*)
# Digital OSF/1
SHLIB_CFLAGS=""
if test "$SHARED_BUILD" = "1" ; then
SHLIB_LD='ld -shared -expect_unresolved "*"'
else
SHLIB_LD='ld -non_shared -expect_unresolved "*"'
fi
SHLIB_LD_LIBS=""
SHLIB_SUFFIX=".so"
DL_OBJS="tclLoadDl.o"
DL_LIBS=""
LDFLAGS=""
LD_SEARCH_FLAGS='-rpath ${LIB_RUNTIME_DIR}'
if test "$GCC" != "yes" ; then
EXTRA_CFLAGS="-DHAVE_TZSET -std1"
fi
# see pthread_intro(3) for pthread support on osf1, k.furukawa
if test "${TCL_THREADS}" = "1" ; then
EXTRA_CFLAGS="${EXTRA_CFLAGS} -DHAVE_PTHREAD_ATTR_SETSTACKSIZE"
EXTRA_CFLAGS="${EXTRA_CFLAGS} -DTCL_THREAD_STACK_MIN=PTHREAD_STACK_MIN*64"
LIBS=`echo $LIBS | sed s/-lpthreads//`
if test "$GCC" = "yes" ; then
LIBS="$LIBS -lpthread -lmach -lexc"
else
EXTRA_CFLAGS="${EXTRA_CFLAGS} -pthread"
LDFLAGS="-pthread"
fi
fi
;;
QNX-6*)
# QNX RTP
# This may work for all QNX, but it was only reported for v6.
SHLIB_CFLAGS="-fPIC"
SHLIB_LD="ld -Bshareable -x"
SHLIB_LD_LIBS=""
SHLIB_SUFFIX=".so"
DL_OBJS="tclLoadDl.o"
# dlopen is in -lc on QNX
DL_LIBS=""
LDFLAGS=""
LD_SEARCH_FLAGS=""
;;
RISCos-*)
SHLIB_CFLAGS="-G 0"
SHLIB_LD="echo tclLdAout $CC \{$SHLIB_CFLAGS\} | `pwd`/tclsh -r -G 0"
SHLIB_LD_LIBS='${LIBS}'
SHLIB_SUFFIX=".a"
DL_OBJS="tclLoadAout.o"
DL_LIBS=""
LDFLAGS="-Wl,-D,08000000"
LD_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}'
;;
SCO_SV-3.2*)
# Note, dlopen is available only on SCO 3.2.5 and greater. However,
# this test works, since "uname -s" was non-standard in 3.2.4 and
# below.
if test "$GCC" = "yes" ; then
SHLIB_CFLAGS="-fPIC -melf"
LDFLAGS="-melf -Wl,-Bexport"
else
SHLIB_CFLAGS="-Kpic -belf"
LDFLAGS="-belf -Wl,-Bexport"
fi
SHLIB_LD="ld -G"
SHLIB_LD_LIBS=""
SHLIB_SUFFIX=".so"
DL_OBJS="tclLoadDl.o"
DL_LIBS=""
LD_SEARCH_FLAGS=""
;;
SINIX*5.4*)
SHLIB_CFLAGS="-K PIC"
SHLIB_LD="cc -G"
SHLIB_LD_LIBS=""
SHLIB_SUFFIX=".so"
DL_OBJS="tclLoadDl.o"
DL_LIBS="-ldl"
LDFLAGS=""
LD_SEARCH_FLAGS=""
;;
SunOS-4*)
SHLIB_CFLAGS="-PIC"
SHLIB_LD="ld"
SHLIB_LD_LIBS=""
SHLIB_SUFFIX=".so"
DL_OBJS="tclLoadDl.o"
DL_LIBS="-ldl"
LDFLAGS=""
LD_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}'
# SunOS can't handle version numbers with dots in them in library
# specs, like -ltcl7.5, so use -ltcl75 instead. Also, it
# requires an extra version number at the end of .so file names.
# So, the library has to have a name like libtcl75.so.1.0
SHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}\$\{DBGX\}.so.1.0'
UNSHARED_LIB_SUFFIX='${TCL_TRIM_DOTS}\$\{DBGX\}.a'
TCL_LIB_VERSIONS_OK=nodots
;;
SunOS-5.[[0-6]]*)
# Note: If _REENTRANT isn't defined, then Solaris
# won't define thread-safe library routines.
AC_DEFINE(_REENTRANT)
AC_DEFINE(_POSIX_PTHREAD_SEMANTICS)
SHLIB_CFLAGS="-KPIC"
# Note: need the LIBS below, otherwise Tk won't find Tcl's
# symbols when dynamically loaded into tclsh.
SHLIB_LD_LIBS='${LIBS}'
SHLIB_SUFFIX=".so"
DL_OBJS="tclLoadDl.o"
DL_LIBS="-ldl"
LDFLAGS=""
if test "$GCC" = "yes" ; then
SHLIB_LD="$CC -shared"
LD_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}'
else
SHLIB_LD="/usr/ccs/bin/ld -G -z text"
LD_SEARCH_FLAGS='-R ${LIB_RUNTIME_DIR}'
fi
;;
SunOS-5*)
# Note: If _REENTRANT isn't defined, then Solaris
# won't define thread-safe library routines.
AC_DEFINE(_REENTRANT)
AC_DEFINE(_POSIX_PTHREAD_SEMANTICS)
SHLIB_CFLAGS="-KPIC"
LDFLAGS=""
# Check to enable 64-bit flags for compiler/linker
if test "$do64bit" = "yes" ; then
arch=`isainfo`
if test "$arch" = "sparcv9 sparc" ; then
if test "$GCC" = "yes" ; then
AC_MSG_WARN("64bit mode not supported with GCC on $system")
else
do64bit_ok=yes
if test "$do64bitVIS" = "yes" ; then
EXTRA_CFLAGS="-xarch=v9a"
LDFLAGS="-xarch=v9a"
else
EXTRA_CFLAGS="-xarch=v9"
LDFLAGS="-xarch=v9"
fi
fi
else
AC_MSG_WARN("64bit mode only supported sparcv9 system")
fi
fi
# Note: need the LIBS below, otherwise Tk won't find Tcl's
# symbols when dynamically loaded into tclsh.
SHLIB_LD_LIBS='${LIBS}'
SHLIB_SUFFIX=".so"
DL_OBJS="tclLoadDl.o"
DL_LIBS="-ldl"
if test "$GCC" = "yes" ; then
SHLIB_LD="$CC -shared"
LD_SEARCH_FLAGS='-Wl,-R,${LIB_RUNTIME_DIR}'
else
SHLIB_LD="/usr/ccs/bin/ld -G -z text"
LD_SEARCH_FLAGS='-R ${LIB_RUNTIME_DIR}'
fi
;;
ULTRIX-4.*)
SHLIB_CFLAGS="-G 0"
SHLIB_SUFFIX=".a"
SHLIB_LD="echo tclLdAout $CC \{$SHLIB_CFLAGS\} | `pwd`/tclsh -r -G 0"
SHLIB_LD_LIBS='${LIBS}'
DL_OBJS="tclLoadAout.o"
DL_LIBS=""
LDFLAGS="-Wl,-D,08000000"
LD_SEARCH_FLAGS='-L${LIB_RUNTIME_DIR}'
if test "$GCC" != "yes" ; then
EXTRA_CFLAGS="-DHAVE_TZSET -std1"
fi
;;
UNIX_SV* | UnixWare-5*)
SHLIB_CFLAGS="-KPIC"
SHLIB_LD="cc -G"
SHLIB_LD_LIBS=""
SHLIB_SUFFIX=".so"
DL_OBJS="tclLoadDl.o"
DL_LIBS="-ldl"
# Some UNIX_SV* systems (unixware 1.1.2 for example) have linkers
# that don't grok the -Bexport option. Test that it does.
hold_ldflags=$LDFLAGS
AC_MSG_CHECKING([for ld accepts -Bexport flag])
LDFLAGS="${LDFLAGS} -Wl,-Bexport"
AC_TRY_LINK(, [int i;], found=yes, found=no)
LDFLAGS=$hold_ldflags
AC_MSG_RESULT([$found])
if test $found = yes; then
LDFLAGS="-Wl,-Bexport"
else
LDFLAGS=""
fi
LD_SEARCH_FLAGS=""
;;
esac
if test "$do64bit" = "yes" -a "$do64bit_ok" = "no" ; then
AC_MSG_WARN("64bit support being disabled -- don\'t know magic for this platform")
fi
# Step 4: If pseudo-static linking is in use (see K. B. Kenny, "Dynamic
# Loading for Tcl -- What Became of It?". Proc. 2nd Tcl/Tk Workshop,
# New Orleans, LA, Computerized Processes Unlimited, 1994), then we need
# to determine which of several header files defines the a.out file
# format (a.out.h, sys/exec.h, or sys/exec_aout.h). At present, we
# support only a file format that is more or less version-7-compatible.
# In particular,
# - a.out files must begin with `struct exec'.
# - the N_TXTOFF on the `struct exec' must compute the seek address
# of the text segment
# - The `struct exec' must contain a_magic, a_text, a_data, a_bss
# and a_entry fields.
# The following compilation should succeed if and only if either sys/exec.h
# or a.out.h is usable for the purpose.
#
# Note that the modified COFF format used on MIPS Ultrix 4.x is usable; the
# `struct exec' includes a second header that contains information that
# duplicates the v7 fields that are needed.
if test "x$DL_OBJS" = "xtclLoadAout.o" ; then
AC_MSG_CHECKING([sys/exec.h])
AC_TRY_COMPILE([#include <sys/exec.h>],[
struct exec foo;
unsigned long seek;
int flag;
#if defined(__mips) || defined(mips)
seek = N_TXTOFF (foo.ex_f, foo.ex_o);
#else
seek = N_TXTOFF (foo);
#endif
flag = (foo.a_magic == OMAGIC);
return foo.a_text + foo.a_data + foo.a_bss + foo.a_entry;
], tcl_ok=usable, tcl_ok=unusable)
AC_MSG_RESULT([$tcl_ok])
if test $tcl_ok = usable; then
AC_DEFINE(USE_SYS_EXEC_H)
else
AC_MSG_CHECKING([a.out.h])
AC_TRY_COMPILE([#include <a.out.h>],[
struct exec foo;
unsigned long seek;
int flag;
#if defined(__mips) || defined(mips)
seek = N_TXTOFF (foo.ex_f, foo.ex_o);
#else
seek = N_TXTOFF (foo);
#endif
flag = (foo.a_magic == OMAGIC);
return foo.a_text + foo.a_data + foo.a_bss + foo.a_entry;
], tcl_ok=usable, tcl_ok=unusable)
AC_MSG_RESULT([$tcl_ok])
if test $tcl_ok = usable; then
AC_DEFINE(USE_A_OUT_H)
else
AC_MSG_CHECKING([sys/exec_aout.h])
AC_TRY_COMPILE([#include <sys/exec_aout.h>],[
struct exec foo;
unsigned long seek;
int flag;
#if defined(__mips) || defined(mips)
seek = N_TXTOFF (foo.ex_f, foo.ex_o);
#else
seek = N_TXTOFF (foo);
#endif
flag = (foo.a_midmag == OMAGIC);
return foo.a_text + foo.a_data + foo.a_bss + foo.a_entry;
], tcl_ok=usable, tcl_ok=unusable)
AC_MSG_RESULT([$tcl_ok])
if test $tcl_ok = usable; then
AC_DEFINE(USE_SYS_EXEC_AOUT_H)
else
DL_OBJS=""
fi
fi
fi
fi
# Step 5: disable dynamic loading if requested via a command-line switch.
AC_ARG_ENABLE(load, [ --disable-load disallow dynamic loading and "load" command],
[tcl_ok=$enableval], [tcl_ok=yes])
if test "$tcl_ok" = "no"; then
DL_OBJS=""
fi
if test "x$DL_OBJS" != "x" ; then
BUILD_DLTEST="\$(DLTEST_TARGETS)"
else
echo "Can't figure out how to do dynamic loading or shared libraries"
echo "on this system."
SHLIB_CFLAGS=""
SHLIB_LD=""
SHLIB_SUFFIX=""
DL_OBJS="tclLoadNone.o"
DL_LIBS=""
LDFLAGS=""
LD_SEARCH_FLAGS=""
BUILD_DLTEST=""
fi
# If we're running gcc, then change the C flags for compiling shared
# libraries to the right flags for gcc, instead of those for the
# standard manufacturer compiler.
if test "$DL_OBJS" != "tclLoadNone.o" ; then
if test "$GCC" = "yes" ; then
case $system in
AIX-*)
;;
BSD/OS*)
;;
IRIX*)
;;
NetBSD-*|FreeBSD-*)
;;
Rhapsody-*|Darwin-*)
;;
RISCos-*)
;;
SCO_SV-3.2*)
;;
ULTRIX-4.*)
;;
windows)
;;
*)
SHLIB_CFLAGS="-fPIC"
;;
esac
fi
fi
if test "$SHARED_LIB_SUFFIX" = "" ; then
SHARED_LIB_SUFFIX='${PACKAGE_VERSION}\$\{DBGX\}${SHLIB_SUFFIX}'
fi
if test "$UNSHARED_LIB_SUFFIX" = "" ; then
UNSHARED_LIB_SUFFIX='${PACKAGE_VERSION}\$\{DBGX\}.a'
fi
AC_SUBST(DL_LIBS)
AC_SUBST(CFLAGS_DEBUG)
AC_SUBST(CFLAGS_OPTIMIZE)
AC_SUBST(CFLAGS_WARNING)
AC_SUBST(EXTRA_CFLAGS)
AC_SUBST(STLIB_LD)
AC_SUBST(SHLIB_LD)
AC_SUBST(SHLIB_CFLAGS)
AC_SUBST(SHLIB_LD_FLAGS)
AC_SUBST(SHLIB_LD_LIBS)
AC_SUBST(LDFLAGS_DEBUG)
AC_SUBST(LDFLAGS_OPTIMIZE)
AC_SUBST(LD_LIBRARY_PATH_VAR)
])
#--------------------------------------------------------------------
# TEA_SERIAL_PORT
#
# Determine which interface to use to talk to the serial port.
# Note that #include lines must begin in leftmost column for
# some compilers to recognize them as preprocessor directives,
# and some build environments have stdin not pointing at a
# pseudo-terminal (usually /dev/null instead.)
#
# Arguments:
# none
#
# Results:
#
# Defines only one of the following vars:
# HAVE_SYS_MODEM_H
# USE_TERMIOS
# USE_TERMIO
# USE_SGTTY
#
#--------------------------------------------------------------------
AC_DEFUN(TEA_SERIAL_PORT, [
AC_CHECK_HEADERS(sys/modem.h)
AC_MSG_CHECKING([termios vs. termio vs. sgtty])
AC_CACHE_VAL(tcl_cv_api_serial, [
AC_TRY_RUN([
#include <termios.h>
int main() {
struct termios t;
if (tcgetattr(0, &t) == 0) {
cfsetospeed(&t, 0);
t.c_cflag |= PARENB | PARODD | CSIZE | CSTOPB;
return 0;
}
return 1;
}], tcl_cv_api_serial=termios, tcl_cv_api_serial=no, tcl_cv_api_serial=no)
if test $tcl_cv_api_serial = no ; then
AC_TRY_RUN([
#include <termio.h>
int main() {
struct termio t;
if (ioctl(0, TCGETA, &t) == 0) {
t.c_cflag |= CBAUD | PARENB | PARODD | CSIZE | CSTOPB;
return 0;
}
return 1;
}], tcl_cv_api_serial=termio, tcl_cv_api_serial=no, tcl_cv_api_serial=no)
fi
if test $tcl_cv_api_serial = no ; then
AC_TRY_RUN([
#include <sgtty.h>
int main() {
struct sgttyb t;
if (ioctl(0, TIOCGETP, &t) == 0) {
t.sg_ospeed = 0;
t.sg_flags |= ODDP | EVENP | RAW;
return 0;
}
return 1;
}], tcl_cv_api_serial=sgtty, tcl_cv_api_serial=none, tcl_cv_api_serial=none)
fi
if test $tcl_cv_api_serial = no ; then
AC_TRY_RUN([
#include <termios.h>
#include <errno.h>
int main() {
struct termios t;
if (tcgetattr(0, &t) == 0
|| errno == ENOTTY || errno == ENXIO || errno == EINVAL) {
cfsetospeed(&t, 0);
t.c_cflag |= PARENB | PARODD | CSIZE | CSTOPB;
return 0;
}
return 1;
}], tcl_cv_api_serial=termios, tcl_cv_api_serial=no, tcl_cv_api_serial=no)
fi
if test $tcl_cv_api_serial = no; then
AC_TRY_RUN([
#include <termio.h>
#include <errno.h>
int main() {
struct termio t;
if (ioctl(0, TCGETA, &t) == 0
|| errno == ENOTTY || errno == ENXIO || errno == EINVAL) {
t.c_cflag |= CBAUD | PARENB | PARODD | CSIZE | CSTOPB;
return 0;
}
return 1;
}], tcl_cv_api_serial=termio, tcl_cv_api_serial=no, tcl_cv_api_serial=no)
fi
if test $tcl_cv_api_serial = no; then
AC_TRY_RUN([
#include <sgtty.h>
#include <errno.h>
int main() {
struct sgttyb t;
if (ioctl(0, TIOCGETP, &t) == 0
|| errno == ENOTTY || errno == ENXIO || errno == EINVAL) {
t.sg_ospeed = 0;
t.sg_flags |= ODDP | EVENP | RAW;
return 0;
}
return 1;
}], tcl_cv_api_serial=sgtty, tcl_cv_api_serial=none, tcl_cv_api_serial=none)
fi])
case $tcl_cv_api_serial in
termios) AC_DEFINE(USE_TERMIOS);;
termio) AC_DEFINE(USE_TERMIO);;
sgtty) AC_DEFINE(USE_SGTTY);;
esac
AC_MSG_RESULT([$tcl_cv_api_serial])
])
#--------------------------------------------------------------------
# TEA_MISSING_POSIX_HEADERS
#
# Supply substitutes for missing POSIX header files. Special
# notes:
# - stdlib.h doesn't define strtol, strtoul, or
# strtod insome versions of SunOS
# - some versions of string.h don't declare procedures such
# as strstr
#
# Arguments:
# none
#
# Results:
#
# Defines some of the following vars:
# NO_DIRENT_H
# NO_ERRNO_H
# NO_VALUES_H
# NO_LIMITS_H
# NO_STDLIB_H
# NO_STRING_H
# NO_SYS_WAIT_H
# NO_DLFCN_H
# HAVE_UNISTD_H
# HAVE_SYS_PARAM_H
#
# HAVE_STRING_H ?
#
#--------------------------------------------------------------------
AC_DEFUN(TEA_MISSING_POSIX_HEADERS, [
AC_MSG_CHECKING([dirent.h])
AC_TRY_LINK([#include <sys/types.h>
#include <dirent.h>], [
#ifndef _POSIX_SOURCE
# ifdef __Lynx__
/*
* Generate compilation error to make the test fail: Lynx headers
* are only valid if really in the POSIX environment.
*/
missing_procedure();
# endif
#endif
DIR *d;
struct dirent *entryPtr;
char *p;
d = opendir("foobar");
entryPtr = readdir(d);
p = entryPtr->d_name;
closedir(d);
], tcl_ok=yes, tcl_ok=no)
if test $tcl_ok = no; then
AC_DEFINE(NO_DIRENT_H)
fi
AC_MSG_RESULT([$tcl_ok])
AC_CHECK_HEADER(errno.h, , [AC_DEFINE(NO_ERRNO_H)])
AC_CHECK_HEADER(float.h, , [AC_DEFINE(NO_FLOAT_H)])
AC_CHECK_HEADER(values.h, , [AC_DEFINE(NO_VALUES_H)])
AC_CHECK_HEADER(limits.h, , [AC_DEFINE(NO_LIMITS_H)])
AC_CHECK_HEADER(stdlib.h, tcl_ok=1, tcl_ok=0)
AC_EGREP_HEADER(strtol, stdlib.h, , tcl_ok=0)
AC_EGREP_HEADER(strtoul, stdlib.h, , tcl_ok=0)
AC_EGREP_HEADER(strtod, stdlib.h, , tcl_ok=0)
if test $tcl_ok = 0; then
AC_DEFINE(NO_STDLIB_H)
fi
AC_CHECK_HEADER(string.h, tcl_ok=1, tcl_ok=0)
AC_EGREP_HEADER(strstr, string.h, , tcl_ok=0)
AC_EGREP_HEADER(strerror, string.h, , tcl_ok=0)
# See also memmove check below for a place where NO_STRING_H can be
# set and why.
if test $tcl_ok = 0; then
AC_DEFINE(NO_STRING_H)
fi
AC_CHECK_HEADER(sys/wait.h, , [AC_DEFINE(NO_SYS_WAIT_H)])
AC_CHECK_HEADER(dlfcn.h, , [AC_DEFINE(NO_DLFCN_H)])
# OS/390 lacks sys/param.h (and doesn't need it, by chance).
# tkUnixPort.h checks for HAVE_LIMITS_H, so do both HAVE and
# CHECK on limits.h
AC_HAVE_HEADERS(limits.h unistd.h sys/param.h)
])
#--------------------------------------------------------------------
# TEA_PATH_X
#
# Locate the X11 header files and the X11 library archive. Try
# the ac_path_x macro first, but if it doesn't find the X stuff
# (e.g. because there's no xmkmf program) then check through
# a list of possible directories. Under some conditions the
# autoconf macro will return an include directory that contains
# no include files, so double-check its result just to be safe.
#
# This should be called after TEA_CONFIG_CFLAGS as setting the
# LIBS line can confuse some configure macro magic.
#
# Arguments:
# none
#
# Results:
#
# Sets the following vars:
# XINCLUDES
# XLIBSW
# LIBS (appends to)
#
#--------------------------------------------------------------------
AC_DEFUN(TEA_PATH_X, [
if test "${TEA_PLATFORM}" = "unix" ; then
TEA_PATH_UNIX_X
fi
])
AC_DEFUN(TEA_PATH_UNIX_X, [
AC_PATH_X
not_really_there=""
if test "$no_x" = ""; then
if test "$x_includes" = ""; then
AC_TRY_CPP([#include <X11/XIntrinsic.h>], , not_really_there="yes")
else
if test ! -r $x_includes/X11/Intrinsic.h; then
not_really_there="yes"
fi
fi
fi
if test "$no_x" = "yes" -o "$not_really_there" = "yes"; then
AC_MSG_CHECKING([for X11 header files])
XINCLUDES="# no special path needed"
AC_TRY_CPP([#include <X11/Intrinsic.h>], , XINCLUDES="nope")
if test "$XINCLUDES" = nope; then
dirs="/usr/unsupported/include /usr/local/include /usr/X386/include /usr/X11R6/include /usr/X11R5/include /usr/include/X11R5 /usr/include/X11R4 /usr/openwin/include /usr/X11/include /usr/sww/include"
for i in $dirs ; do
if test -r $i/X11/Intrinsic.h; then
AC_MSG_RESULT([$i])
XINCLUDES=" -I$i"
break
fi
done
fi
else
if test "$x_includes" != ""; then
XINCLUDES=-I$x_includes
else
XINCLUDES="# no special path needed"
fi
fi
if test "$XINCLUDES" = nope; then
AC_MSG_RESULT([could not find any!])
XINCLUDES="# no include files found"
fi
if test "$no_x" = yes; then
AC_MSG_CHECKING([for X11 libraries])
XLIBSW=nope
dirs="/usr/unsupported/lib /usr/local/lib /usr/X386/lib /usr/X11R6/lib /usr/X11R5/lib /usr/lib/X11R5 /usr/lib/X11R4 /usr/openwin/lib /usr/X11/lib /usr/sww/X11/lib"
for i in $dirs ; do
if test -r $i/libX11.a -o -r $i/libX11.so -o -r $i/libX11.sl; then
AC_MSG_RESULT([$i])
XLIBSW="-L$i -lX11"
x_libraries="$i"
break
fi
done
else
if test "$x_libraries" = ""; then
XLIBSW=-lX11
else
XLIBSW="-L$x_libraries -lX11"
fi
fi
if test "$XLIBSW" = nope ; then
AC_CHECK_LIB(Xwindow, XCreateWindow, XLIBSW=-lXwindow)
fi
if test "$XLIBSW" = nope ; then
AC_MSG_RESULT([could not find any! Using -lX11.])
XLIBSW=-lX11
fi
if test x"${XLIBSW}" != x ; then
PKG_LIBS="${PKG_LIBS} ${XLIBSW}"
fi
])
#--------------------------------------------------------------------
# TEA_BLOCKING_STYLE
#
# The statements below check for systems where POSIX-style
# non-blocking I/O (O_NONBLOCK) doesn't work or is unimplemented.
# On these systems (mostly older ones), use the old BSD-style
# FIONBIO approach instead.
#
# Arguments:
# none
#
# Results:
#
# Defines some of the following vars:
# HAVE_SYS_IOCTL_H
# HAVE_SYS_FILIO_H
# USE_FIONBIO
# O_NONBLOCK
#
#--------------------------------------------------------------------
AC_DEFUN(TEA_BLOCKING_STYLE, [
AC_CHECK_HEADERS(sys/ioctl.h)
AC_CHECK_HEADERS(sys/filio.h)
AC_MSG_CHECKING([FIONBIO vs. O_NONBLOCK for nonblocking I/O])
if test -f /usr/lib/NextStep/software_version; then
system=NEXTSTEP-`awk '/3/,/3/' /usr/lib/NextStep/software_version`
else
system=`uname -s`-`uname -r`
if test "$?" -ne 0 ; then
system=unknown
else
# Special check for weird MP-RAS system (uname returns weird
# results, and the version is kept in special file).
if test -r /etc/.relid -a "X`uname -n`" = "X`uname -s`" ; then
system=MP-RAS-`awk '{print $3}' /etc/.relid'`
fi
if test "`uname -s`" = "AIX" ; then
system=AIX-`uname -v`.`uname -r`
fi
fi
fi
case $system in
# There used to be code here to use FIONBIO under AIX. However, it
# was reported that FIONBIO doesn't work under AIX 3.2.5. Since
# using O_NONBLOCK seems fine under AIX 4.*, I removed the FIONBIO
# code (JO, 5/31/97).
OSF*)
AC_DEFINE(USE_FIONBIO)
AC_MSG_RESULT([FIONBIO])
;;
SunOS-4*)
AC_DEFINE(USE_FIONBIO)
AC_MSG_RESULT([FIONBIO])
;;
ULTRIX-4.*)
AC_DEFINE(USE_FIONBIO)
AC_MSG_RESULT([FIONBIO])
;;
*)
AC_MSG_RESULT([O_NONBLOCK])
;;
esac
])
#--------------------------------------------------------------------
# TEA_TIME_HANLDER
#
# Checks how the system deals with time.h, what time structures
# are used on the system, and what fields the structures have.
#
# Arguments:
# none
#
# Results:
#
# Defines some of the following vars:
# USE_DELTA_FOR_TZ
# HAVE_TM_GMTOFF
# HAVE_TM_TZADJ
# HAVE_TIMEZONE_VAR
#
#--------------------------------------------------------------------
AC_DEFUN(TEA_TIME_HANDLER, [
AC_CHECK_HEADERS(sys/time.h)
AC_HEADER_TIME
AC_STRUCT_TIMEZONE
AC_CHECK_FUNCS(gmtime_r localtime_r)
AC_MSG_CHECKING([tm_tzadj in struct tm])
AC_CACHE_VAL(tcl_cv_member_tm_tzadj,
AC_TRY_COMPILE([#include <time.h>], [struct tm tm; tm.tm_tzadj;],
tcl_cv_member_tm_tzadj=yes, tcl_cv_member_tm_tzadj=no))
AC_MSG_RESULT([$tcl_cv_member_tm_tzadj])
if test $tcl_cv_member_tm_tzadj = yes ; then
AC_DEFINE(HAVE_TM_TZADJ)
fi
AC_MSG_CHECKING([tm_gmtoff in struct tm])
AC_CACHE_VAL(tcl_cv_member_tm_gmtoff,
AC_TRY_COMPILE([#include <time.h>], [struct tm tm; tm.tm_gmtoff;],
tcl_cv_member_tm_gmtoff=yes, tcl_cv_member_tm_gmtoff=no))
AC_MSG_RESULT([$tcl_cv_member_tm_gmtoff])
if test $tcl_cv_member_tm_gmtoff = yes ; then
AC_DEFINE(HAVE_TM_GMTOFF)
fi
#
# Its important to include time.h in this check, as some systems
# (like convex) have timezone functions, etc.
#
AC_MSG_CHECKING([long timezone variable])
AC_CACHE_VAL(tcl_cv_var_timezone,
AC_TRY_COMPILE([#include <time.h>],
[extern long timezone;
timezone += 1;
exit (0);],
tcl_cv_timezone_long=yes, tcl_cv_timezone_long=no))
AC_MSG_RESULT([$tcl_cv_timezone_long])
if test $tcl_cv_timezone_long = yes ; then
AC_DEFINE(HAVE_TIMEZONE_VAR)
else
#
# On some systems (eg IRIX 6.2), timezone is a time_t and not a long.
#
AC_MSG_CHECKING([time_t timezone variable])
AC_CACHE_VAL(tcl_cv_timezone_time,
AC_TRY_COMPILE([#include <time.h>],
[extern time_t timezone;
timezone += 1;
exit (0);],
tcl_cv_timezone_time=yes, tcl_cv_timezone_time=no))
AC_MSG_RESULT([$tcl_cv_timezone_time])
if test $tcl_cv_timezone_time = yes ; then
AC_DEFINE(HAVE_TIMEZONE_VAR)
fi
fi
])
#--------------------------------------------------------------------
# TEA_BUGGY_STRTOD
#
# Under Solaris 2.4, strtod returns the wrong value for the
# terminating character under some conditions. Check for this
# and if the problem exists use a substitute procedure
# "fixstrtod" (provided by Tcl) that corrects the error.
# Also, on Compaq's Tru64 Unix 5.0,
# strtod(" ") returns 0.0 instead of a failure to convert.
#
# Arguments:
# none
#
# Results:
#
# Might defines some of the following vars:
# strtod (=fixstrtod)
#
#--------------------------------------------------------------------
AC_DEFUN(TEA_BUGGY_STRTOD, [
AC_CHECK_FUNC(strtod, tcl_strtod=1, tcl_strtod=0)
if test "$tcl_strtod" = 1; then
AC_MSG_CHECKING([for Solaris2.4/Tru64 strtod bugs])
AC_TRY_RUN([
extern double strtod();
int main()
{
char *string = "NaN", *spaceString = " ";
char *term;
double value;
value = strtod(string, &term);
if ((term != string) && (term[-1] == 0)) {
exit(1);
}
value = strtod(spaceString, &term);
if (term == (spaceString+1)) {
exit(1);
}
exit(0);
}], tcl_ok=1, tcl_ok=0, tcl_ok=0)
if test "$tcl_ok" = 1; then
AC_MSG_RESULT([ok])
else
AC_MSG_RESULT([buggy])
#LIBOBJS="$LIBOBJS fixstrtod.o"
AC_LIBOBJ([fixstrtod])
USE_COMPAT=1
AC_DEFINE(strtod, fixstrtod)
fi
fi
])
#--------------------------------------------------------------------
# TEA_TCL_LINK_LIBS
#
# Search for the libraries needed to link the Tcl shell.
# Things like the math library (-lm) and socket stuff (-lsocket vs.
# -lnsl) are dealt with here.
#
# Arguments:
# Requires the following vars to be set in the Makefile:
# DL_LIBS
# LIBS
# MATH_LIBS
#
# Results:
#
# Subst's the following var:
# TCL_LIBS
# MATH_LIBS
#
# Might append to the following vars:
# LIBS
#
# Might define the following vars:
# HAVE_NET_ERRNO_H
#
#--------------------------------------------------------------------
AC_DEFUN(TEA_TCL_LINK_LIBS, [
#--------------------------------------------------------------------
# On a few very rare systems, all of the libm.a stuff is
# already in libc.a. Set compiler flags accordingly.
# Also, Linux requires the "ieee" library for math to work
# right (and it must appear before "-lm").
#--------------------------------------------------------------------
AC_CHECK_FUNC(sin, MATH_LIBS="", MATH_LIBS="-lm")
AC_CHECK_LIB(ieee, main, [MATH_LIBS="-lieee $MATH_LIBS"])
#--------------------------------------------------------------------
# Interactive UNIX requires -linet instead of -lsocket, plus it
# needs net/errno.h to define the socket-related error codes.
#--------------------------------------------------------------------
AC_CHECK_LIB(inet, main, [LIBS="$LIBS -linet"])
AC_CHECK_HEADER(net/errno.h, AC_DEFINE(HAVE_NET_ERRNO_H))
#--------------------------------------------------------------------
# Check for the existence of the -lsocket and -lnsl libraries.
# The order here is important, so that they end up in the right
# order in the command line generated by make. Here are some
# special considerations:
# 1. Use "connect" and "accept" to check for -lsocket, and
# "gethostbyname" to check for -lnsl.
# 2. Use each function name only once: can't redo a check because
# autoconf caches the results of the last check and won't redo it.
# 3. Use -lnsl and -lsocket only if they supply procedures that
# aren't already present in the normal libraries. This is because
# IRIX 5.2 has libraries, but they aren't needed and they're
# bogus: they goof up name resolution if used.
# 4. On some SVR4 systems, can't use -lsocket without -lnsl too.
# To get around this problem, check for both libraries together
# if -lsocket doesn't work by itself.
#--------------------------------------------------------------------
tcl_checkBoth=0
AC_CHECK_FUNC(connect, tcl_checkSocket=0, tcl_checkSocket=1)
if test "$tcl_checkSocket" = 1; then
AC_CHECK_FUNC(setsockopt, , [AC_CHECK_LIB(socket, setsockopt,
LIBS="$LIBS -lsocket", tcl_checkBoth=1)])
fi
if test "$tcl_checkBoth" = 1; then
tk_oldLibs=$LIBS
LIBS="$LIBS -lsocket -lnsl"
AC_CHECK_FUNC(accept, tcl_checkNsl=0, [LIBS=$tk_oldLibs])
fi
AC_CHECK_FUNC(gethostbyname, , [AC_CHECK_LIB(nsl, gethostbyname,
[LIBS="$LIBS -lnsl"])])
# Don't perform the eval of the libraries here because DL_LIBS
# won't be set until we call TEA_CONFIG_CFLAGS
TCL_LIBS='${DL_LIBS} ${LIBS} ${MATH_LIBS}'
AC_SUBST(TCL_LIBS)
AC_SUBST(MATH_LIBS)
])
#--------------------------------------------------------------------
# TEA_TCL_EARLY_FLAGS
#
# Check for what flags are needed to be passed so the correct OS
# features are available.
#
# Arguments:
# None
#
# Results:
#
# Might define the following vars:
# _ISOC99_SOURCE
# _LARGEFILE64_SOURCE
#
#--------------------------------------------------------------------
AC_DEFUN(TEA_TCL_EARLY_FLAG,[
AC_CACHE_VAL([tcl_cv_flag_]translit($1,[A-Z],[a-z]),
AC_TRY_COMPILE([$2], $3, [tcl_cv_flag_]translit($1,[A-Z],[a-z])=no,
AC_TRY_COMPILE([[#define ]$1[ 1
]$2], $3,
[tcl_cv_flag_]translit($1,[A-Z],[a-z])=yes,
[tcl_cv_flag_]translit($1,[A-Z],[a-z])=no)))
if test ["x${tcl_cv_flag_]translit($1,[A-Z],[a-z])[}" = "xyes"] ; then
AC_DEFINE($1)
tcl_flags="$tcl_flags $1"
fi
])
AC_DEFUN(TEA_TCL_EARLY_FLAGS,[
AC_MSG_CHECKING([for required early compiler flags])
tcl_flags=""
TEA_TCL_EARLY_FLAG(_ISOC99_SOURCE,[#include <stdlib.h>],
[char *p = (char *)strtoll; char *q = (char *)strtoull;])
TEA_TCL_EARLY_FLAG(_LARGEFILE64_SOURCE,[#include <sys/stat.h>],
[struct stat64 buf; int i = stat64("/", &buf);])
if test "x${tcl_flags}" = "x" ; then
AC_MSG_RESULT([none])
else
AC_MSG_RESULT([${tcl_flags}])
fi
])
#--------------------------------------------------------------------
# TEA_TCL_64BIT_FLAGS
#
# Check for what is defined in the way of 64-bit features.
#
# Arguments:
# None
#
# Results:
#
# Might define the following vars:
# TCL_WIDE_INT_IS_LONG
# TCL_WIDE_INT_TYPE
# HAVE_STRUCT_DIRENT64
# HAVE_STRUCT_STAT64
# HAVE_TYPE_OFF64_T
#
#--------------------------------------------------------------------
AC_DEFUN(TEA_TCL_64BIT_FLAGS, [
AC_MSG_CHECKING([for 64-bit integer type])
AC_CACHE_VAL(tcl_cv_type_64bit,[
tcl_cv_type_64bit=none
# See if the compiler knows natively about __int64
AC_TRY_COMPILE(,[__int64 value = (__int64) 0;],
tcl_type_64bit=__int64, tcl_type_64bit="long long")
# See if we should use long anyway Note that we substitute in the
# type that is our current guess for a 64-bit type inside this check
# program, so it should be modified only carefully...
AC_TRY_COMPILE(,[switch (0) {
case 1: case (sizeof(]${tcl_type_64bit}[)==sizeof(long)): ;
}],tcl_cv_type_64bit=${tcl_type_64bit})])
if test "${tcl_cv_type_64bit}" = none ; then
AC_DEFINE(TCL_WIDE_INT_IS_LONG)
AC_MSG_RESULT([using long])
elif test "${tcl_cv_type_64bit}" = "__int64" ; then
# We actually want to use the default tcl.h checks in this
# case to handle both TCL_WIDE_INT_TYPE and TCL_LL_MODIFIER*
AC_MSG_RESULT([using Tcl header defaults])
else
AC_DEFINE_UNQUOTED(TCL_WIDE_INT_TYPE,${tcl_cv_type_64bit})
AC_MSG_RESULT([${tcl_cv_type_64bit}])
# Now check for auxiliary declarations
AC_MSG_CHECKING([for struct dirent64])
AC_CACHE_VAL(tcl_cv_struct_dirent64,[
AC_TRY_COMPILE([#include <sys/types.h>
#include <sys/dirent.h>],[struct dirent64 p;],
tcl_cv_struct_dirent64=yes,tcl_cv_struct_dirent64=no)])
if test "x${tcl_cv_struct_dirent64}" = "xyes" ; then
AC_DEFINE(HAVE_STRUCT_DIRENT64)
fi
AC_MSG_RESULT([${tcl_cv_struct_dirent64}])
AC_MSG_CHECKING([for struct stat64])
AC_CACHE_VAL(tcl_cv_struct_stat64,[
AC_TRY_COMPILE([#include <sys/stat.h>],[struct stat64 p;
],
tcl_cv_struct_stat64=yes,tcl_cv_struct_stat64=no)])
if test "x${tcl_cv_struct_stat64}" = "xyes" ; then
AC_DEFINE(HAVE_STRUCT_STAT64)
fi
AC_MSG_RESULT([${tcl_cv_struct_stat64}])
AC_MSG_CHECKING([for off64_t])
AC_CACHE_VAL(tcl_cv_type_off64_t,[
AC_TRY_COMPILE([#include <sys/types.h>],[off64_t offset;
],
tcl_cv_type_off64_t=yes,tcl_cv_type_off64_t=no)])
if test "x${tcl_cv_type_off64_t}" = "xyes" ; then
AC_DEFINE(HAVE_TYPE_OFF64_T)
fi
AC_MSG_RESULT([${tcl_cv_type_off64_t}])
fi
])
##
## Here ends the standard Tcl configuration bits and starts the
## TEA specific functions
##
#------------------------------------------------------------------------
# TEA_INIT --
#
# Init various Tcl Extension Architecture (TEA) variables.
# This should be the first called TEA_* macro.
#
# Arguments:
# none
#
# Results:
#
# Defines and substs the following vars:
# CYGPATH
# EXEEXT
# Defines only:
# TEA_INITED
# TEA_PLATFORM (windows or unix)
#
# "cygpath" is used on windows to generate native path names for include
# files. These variables should only be used with the compiler and linker
# since they generate native path names.
#
# EXEEXT
# Select the executable extension based on the host type. This
# is a lightweight replacement for AC_EXEEXT that doesn't require
# a compiler.
#------------------------------------------------------------------------
AC_DEFUN(TEA_INIT, [
TEA_VERSION="3.0"
AC_MSG_CHECKING([for correct TEA configuration])
if test x"${PACKAGE_NAME}" = x ; then
AC_MSG_ERROR([
The PACKAGE_NAME variable must be defined by your TEA configure.in])
fi
if test x"$1" = x ; then
AC_MSG_ERROR([
TEA version not specified.])
elif test "$1" != "${TEA_VERSION}" ; then
AC_MSG_RESULT([warning: TEA version "$1" != ${TEA_VERSION}])
else
AC_MSG_RESULT([ok])
fi
case "`uname -s`" in
*win32*|*WIN32*|*CYGWIN_NT*|*CYGWIN_9*|*CYGWIN_ME*|*MINGW32_*)
AC_CHECK_PROG(CYGPATH, cygpath, cygpath -w, echo)
EXEEXT=".exe"
TEA_PLATFORM="windows"
;;
*)
CYGPATH=echo
EXEEXT=""
TEA_PLATFORM="unix"
;;
esac
# Check if exec_prefix is set. If not use fall back to prefix
if test x$exec_prefix = xNONE ; then exec_prefix=$prefix ; fi
AC_SUBST(EXEEXT)
AC_SUBST(CYGPATH)
# This package name must be replaced statically for AC_SUBST to work
AC_SUBST(PKG_LIB_FILE)
# Substitute STUB_LIB_FILE in case package creates a stub library too.
AC_SUBST(PKG_STUB_LIB_FILE)
# We AC_SUBST these here to ensure they are subst'ed,
# in case the user doesn't call TEA_ADD_...
AC_SUBST(PKG_STUB_SOURCES)
AC_SUBST(PKG_STUB_OBJECTS)
AC_SUBST(PKG_TCL_SOURCES)
AC_SUBST(PKG_HEADERS)
AC_SUBST(PKG_INCLUDES)
AC_SUBST(PKG_LIBS)
AC_SUBST(PKG_CFLAGS)
])
#------------------------------------------------------------------------
# TEA_ADD_SOURCES --
#
# Specify one or more source files. Users should check for
# the right platform before adding to their list.
# It is not important to specify the directory, as long as it is
# in the generic, win or unix subdirectory of $(srcdir).
#
# Arguments:
# one or more file names
#
# Results:
#
# Defines and substs the following vars:
# PKG_SOURCES
# PKG_OBJECTS
#------------------------------------------------------------------------
AC_DEFUN(TEA_ADD_SOURCES, [
vars="$@"
for i in $vars; do
case $i in
[\$]*)
# allow $-var names
PKG_SOURCES="$PKG_SOURCES $i"
PKG_OBJECTS="$PKG_OBJECTS $i"
;;
*)
# check for existence - allows for generic/win/unix VPATH
if test ! -f "${srcdir}/$i" -a ! -f "${srcdir}/generic/$i" \
-a ! -f "${srcdir}/win/$i" -a ! -f "${srcdir}/unix/$i" \
; then
AC_MSG_ERROR([could not find source file '$i'])
fi
PKG_SOURCES="$PKG_SOURCES $i"
# this assumes it is in a VPATH dir
i=`basename $i`
# handle user calling this before or after TEA_SETUP_COMPILER
if test x"${OBJEXT}" != x ; then
j="`echo $i | sed -e 's/\.[[^.]]*$//'`.${OBJEXT}"
else
j="`echo $i | sed -e 's/\.[[^.]]*$//'`.\${OBJEXT}"
fi
PKG_OBJECTS="$PKG_OBJECTS $j"
;;
esac
done
AC_SUBST(PKG_SOURCES)
AC_SUBST(PKG_OBJECTS)
])
#------------------------------------------------------------------------
# TEA_ADD_STUB_SOURCES --
#
# Specify one or more source files. Users should check for
# the right platform before adding to their list.
# It is not important to specify the directory, as long as it is
# in the generic, win or unix subdirectory of $(srcdir).
#
# Arguments:
# one or more file names
#
# Results:
#
# Defines and substs the following vars:
# PKG_STUB_SOURCES
# PKG_STUB_OBJECTS
#------------------------------------------------------------------------
AC_DEFUN(TEA_ADD_STUB_SOURCES, [
vars="$@"
for i in $vars; do
# check for existence - allows for generic/win/unix VPATH
if test ! -f "${srcdir}/$i" -a ! -f "${srcdir}/generic/$i" \
-a ! -f "${srcdir}/win/$i" -a ! -f "${srcdir}/unix/$i" \
; then
AC_MSG_ERROR([could not find stub source file '$i'])
fi
PKG_STUB_SOURCES="$PKG_STUB_SOURCES $i"
# this assumes it is in a VPATH dir
i=`basename $i`
# handle user calling this before or after TEA_SETUP_COMPILER
if test x"${OBJEXT}" != x ; then
j="`echo $i | sed -e 's/\.[[^.]]*$//'`.${OBJEXT}"
else
j="`echo $i | sed -e 's/\.[[^.]]*$//'`.\${OBJEXT}"
fi
PKG_STUB_OBJECTS="$PKG_STUB_OBJECTS $j"
done
AC_SUBST(PKG_STUB_SOURCES)
AC_SUBST(PKG_STUB_OBJECTS)
])
#------------------------------------------------------------------------
# TEA_ADD_TCL_SOURCES --
#
# Specify one or more Tcl source files. These should be platform
# independent runtime files.
#
# Arguments:
# one or more file names
#
# Results:
#
# Defines and substs the following vars:
# PKG_TCL_SOURCES
#------------------------------------------------------------------------
AC_DEFUN(TEA_ADD_TCL_SOURCES, [
vars="$@"
for i in $vars; do
# check for existence, be strict because it is installed
if test ! -f "${srcdir}/$i" ; then
AC_MSG_ERROR([could not find tcl source file '${srcdir}/$i'])
fi
PKG_TCL_SOURCES="$PKG_TCL_SOURCES $i"
done
AC_SUBST(PKG_TCL_SOURCES)
])
#------------------------------------------------------------------------
# TEA_ADD_HEADERS --
#
# Specify one or more source headers. Users should check for
# the right platform before adding to their list.
#
# Arguments:
# one or more file names
#
# Results:
#
# Defines and substs the following vars:
# PKG_HEADERS
#------------------------------------------------------------------------
AC_DEFUN(TEA_ADD_HEADERS, [
vars="$@"
for i in $vars; do
# check for existence, be strict because it is installed
if test ! -f "${srcdir}/$i" ; then
AC_MSG_ERROR([could not find header file '${srcdir}/$i'])
fi
PKG_HEADERS="$PKG_HEADERS $i"
done
AC_SUBST(PKG_HEADERS)
])
#------------------------------------------------------------------------
# TEA_ADD_INCLUDES --
#
# Specify one or more include dirs. Users should check for
# the right platform before adding to their list.
#
# Arguments:
# one or more file names
#
# Results:
#
# Defines and substs the following vars:
# PKG_INCLUDES
#------------------------------------------------------------------------
AC_DEFUN(TEA_ADD_INCLUDES, [
vars="$@"
for i in $vars; do
PKG_INCLUDES="$PKG_INCLUDES $i"
done
AC_SUBST(PKG_INCLUDES)
])
#------------------------------------------------------------------------
# TEA_ADD_LIBS --
#
# Specify one or more libraries. Users should check for
# the right platform before adding to their list.
#
# Arguments:
# one or more file names
#
# Results:
#
# Defines and substs the following vars:
# PKG_LIBS
#------------------------------------------------------------------------
AC_DEFUN(TEA_ADD_LIBS, [
vars="$@"
for i in $vars; do
PKG_LIBS="$PKG_LIBS $i"
done
AC_SUBST(PKG_LIBS)
])
#------------------------------------------------------------------------
# TEA_ADD_CFLAGS --
#
# Specify one or more CFLAGS. Users should check for
# the right platform before adding to their list.
#
# Arguments:
# one or more file names
#
# Results:
#
# Defines and substs the following vars:
# PKG_CFLAGS
#------------------------------------------------------------------------
AC_DEFUN(TEA_ADD_CFLAGS, [
PKG_CFLAGS="$PKG_CFLAGS $@"
AC_SUBST(PKG_CFLAGS)
])
#------------------------------------------------------------------------
# TEA_PREFIX --
#
# Handle the --prefix=... option by defaulting to what Tcl gave
#
# Arguments:
# none
#
# Results:
#
# If --prefix or --exec-prefix was not specified, $prefix and
# $exec_prefix will be set to the values given to Tcl when it was
# configured.
#------------------------------------------------------------------------
AC_DEFUN(TEA_PREFIX, [
# Should be AC_MSG_NOTICE, but that requires autoconf 2.50
if test "${prefix}" = "NONE"; then
prefix_default=yes
if test x"${TCL_PREFIX}" != x; then
AC_MSG_WARN([--prefix defaulting to TCL_PREFIX ${TCL_PREFIX}])
prefix=${TCL_PREFIX}
else
prefix=/usr/local
fi
fi
if test "${exec_prefix}" = "NONE" -a x"${prefix_default}" = x"yes" ; then
if test x"${TCL_EXEC_PREFIX}" != x; then
AC_MSG_WARN([--exec-prefix defaulting to TCL_EXEC_PREFIX ${TCL_EXEC_PREFIX}])
exec_prefix=${TCL_EXEC_PREFIX}
else
exec_prefix=$prefix
fi
fi
])
#------------------------------------------------------------------------
# TEA_SETUP_COMPILER_CC --
#
# Do compiler checks the way we want. This is just a replacement
# for AC_PROG_CC in TEA configure.in files to make them cleaner.
#
# Arguments:
# none
#
# Results:
#
# Sets up CC var and other standard bits we need to make executables.
#------------------------------------------------------------------------
AC_DEFUN(TEA_SETUP_COMPILER_CC, [
# Don't put any macros that use the compiler (e.g. AC_TRY_COMPILE)
# in this macro, they need to go into TEA_SETUP_COMPILER instead.
# If the user did not set CFLAGS, set it now to keep
# the AC_PROG_CC macro from adding "-g -O2".
if test "${CFLAGS+set}" != "set" ; then
CFLAGS=""
fi
AC_PROG_CC
AC_PROG_CPP
AC_PROG_INSTALL
#--------------------------------------------------------------------
# Checks to see if the make program sets the $MAKE variable.
#--------------------------------------------------------------------
AC_PROG_MAKE_SET
#--------------------------------------------------------------------
# Find ranlib
#--------------------------------------------------------------------
AC_PROG_RANLIB
#--------------------------------------------------------------------
# Determines the correct binary file extension (.o, .obj, .exe etc.)
#--------------------------------------------------------------------
AC_OBJEXT
AC_EXEEXT
])
#------------------------------------------------------------------------
# TEA_SETUP_COMPILER --
#
# Do compiler checks that use the compiler. This must go after
# TEA_SETUP_COMPILER_CC, which does the actual compiler check.
#
# Arguments:
# none
#
# Results:
#
# Sets up CC var and other standard bits we need to make executables.
#------------------------------------------------------------------------
AC_DEFUN(TEA_SETUP_COMPILER, [
# Any macros that use the compiler (e.g. AC_TRY_COMPILE) have to go here.
AC_REQUIRE([TEA_SETUP_COMPILER_CC])
#------------------------------------------------------------------------
# If we're using GCC, see if the compiler understands -pipe. If so, use it.
# It makes compiling go faster. (This is only a performance feature.)
#------------------------------------------------------------------------
if test -z "$no_pipe" -a -n "$GCC"; then
AC_MSG_CHECKING([if the compiler understands -pipe])
OLDCC="$CC"
CC="$CC -pipe"
AC_TRY_COMPILE(,, AC_MSG_RESULT([yes]), CC="$OLDCC"
AC_MSG_RESULT([no]))
fi
#--------------------------------------------------------------------
# Common compiler flag setup
#--------------------------------------------------------------------
TEA_TCL_EARLY_FLAGS
TEA_TCL_64BIT_FLAGS
AC_C_BIGENDIAN
if test "${TEA_PLATFORM}" = "unix" ; then
TEA_TCL_LINK_LIBS
TEA_MISSING_POSIX_HEADERS
# Let the user call this, because if it triggers, they will
# need a compat/strtod.c that is correct. Users can also
# use Tcl_GetDouble(FromObj) instead.
#TEA_BUGGY_STRTOD
fi
])
#------------------------------------------------------------------------
# TEA_MAKE_LIB --
#
# Generate a line that can be used to build a shared/unshared library
# in a platform independent manner.
#
# Arguments:
# none
#
# Requires:
#
# Results:
#
# Defines the following vars:
# CFLAGS - Done late here to note disturb other AC macros
# MAKE_LIB - Command to execute to build the Tcl library;
# differs depending on whether or not Tcl is being
# compiled as a shared library.
# MAKE_SHARED_LIB Makefile rule for building a shared library
# MAKE_STATIC_LIB Makefile rule for building a static library
# MAKE_STUB_LIB Makefile rule for building a stub library
#------------------------------------------------------------------------
AC_DEFUN(TEA_MAKE_LIB, [
if test "${TEA_PLATFORM}" = "windows" -a "$GCC" != "yes"; then
MAKE_STATIC_LIB="\${STLIB_LD} -out:\[$]@ \$(PKG_OBJECTS)"
MAKE_SHARED_LIB="\${SHLIB_LD} \${SHLIB_LD_FLAGS} \${SHLIB_LD_LIBS} \${LDFLAGS_DEFAULT} -out:\[$]@ \$(PKG_OBJECTS)"
MAKE_STUB_LIB="\${STLIB_LD} -out:\[$]@ \$(PKG_STUB_OBJECTS)"
else
MAKE_STATIC_LIB="\${STLIB_LD} \[$]@ \$(PKG_OBJECTS)"
MAKE_SHARED_LIB="\${SHLIB_LD} -o \[$]@ \$(PKG_OBJECTS) \${SHLIB_LD_FLAGS} \${SHLIB_LD_LIBS}"
MAKE_STUB_LIB="\${STLIB_LD} \[$]@ \$(PKG_STUB_OBJECTS)"
fi
if test "${SHARED_BUILD}" = "1" ; then
MAKE_LIB="${MAKE_SHARED_LIB} "
else
MAKE_LIB="${MAKE_STATIC_LIB} "
fi
#--------------------------------------------------------------------
# Shared libraries and static libraries have different names.
# Use the double eval to make sure the ${DBGX} in the suffix is
# substituted.
#--------------------------------------------------------------------
RANLIB_STUB="${RANLIB}"
if test "${TEA_PLATFORM}" = "windows" ; then
if test "${SHARED_BUILD}" = "1" ; then
# We force the unresolved linking of symbols that are really in
# the private libraries of Tcl and Tk.
SHLIB_LD_LIBS="${SHLIB_LD_LIBS} \"`${CYGPATH} ${TCL_BIN_DIR}/${TCL_STUB_LIB_FILE}`\""
if test x"${TK_BIN_DIR}" != x ; then
SHLIB_LD_LIBS="${SHLIB_LD_LIBS} \"`${CYGPATH} ${TK_BIN_DIR}/${TK_STUB_LIB_FILE}`\""
fi
eval eval "PKG_LIB_FILE=${PACKAGE_NAME}${SHARED_LIB_SUFFIX}"
RANLIB=:
else
eval eval "PKG_LIB_FILE=${PACKAGE_NAME}${UNSHARED_LIB_SUFFIX}"
fi
# Some packages build there own stubs libraries
eval eval "PKG_STUB_LIB_FILE=${PACKAGE_NAME}stub${UNSHARED_LIB_SUFFIX}"
else
if test "${SHARED_BUILD}" = "1" ; then
SHLIB_LD_LIBS="${SHLIB_LD_LIBS} ${TCL_STUB_LIB_SPEC}"
if test x"${TK_BIN_DIR}" != x ; then
SHLIB_LD_LIBS="${SHLIB_LD_LIBS} ${TK_STUB_LIB_SPEC}"
fi
eval eval "PKG_LIB_FILE=lib${PACKAGE_NAME}${SHARED_LIB_SUFFIX}"
RANLIB=:
else
eval eval "PKG_LIB_FILE=lib${PACKAGE_NAME}${UNSHARED_LIB_SUFFIX}"
fi
# Some packages build there own stubs libraries
eval eval "PKG_STUB_LIB_FILE=lib${PACKAGE_NAME}stub${UNSHARED_LIB_SUFFIX}"
fi
# These are escaped so that only CFLAGS is picked up at configure time.
# The other values will be substituted at make time.
CFLAGS="${CFLAGS} \${CFLAGS_DEFAULT} \${CFLAGS_WARNING}"
if test "${SHARED_BUILD}" = "1" ; then
CFLAGS="${CFLAGS} \${SHLIB_CFLAGS}"
fi
AC_SUBST(MAKE_LIB)
AC_SUBST(MAKE_SHARED_LIB)
AC_SUBST(MAKE_STATIC_LIB)
AC_SUBST(MAKE_STUB_LIB)
AC_SUBST(RANLIB_STUB)
])
#------------------------------------------------------------------------
# TEA_LIB_SPEC --
#
# Compute the name of an existing object library located in libdir
# from the given base name and produce the appropriate linker flags.
#
# Arguments:
# basename The base name of the library without version
# numbers, extensions, or "lib" prefixes.
# extra_dir Extra directory in which to search for the
# library. This location is used first, then
# $prefix/$exec-prefix, then some defaults.
#
# Requires:
# TEA_INIT and TEA_PREFIX must be called first.
#
# Results:
#
# Defines the following vars:
# ${basename}_LIB_NAME The computed library name.
# ${basename}_LIB_SPEC The computed linker flags.
#------------------------------------------------------------------------
AC_DEFUN(TEA_LIB_SPEC, [
AC_MSG_CHECKING([for $1 library])
# Look in exec-prefix for the library (defined by TEA_PREFIX).
tea_lib_name_dir="${exec_prefix}/lib"
# Or in a user-specified location.
if test x"$2" != x ; then
tea_extra_lib_dir=$2
else
tea_extra_lib_dir=NONE
fi
for i in \
`ls -dr ${tea_extra_lib_dir}/$1[[0-9]]*.lib 2>/dev/null ` \
`ls -dr ${tea_extra_lib_dir}/lib$1[[0-9]]* 2>/dev/null ` \
`ls -dr ${tea_lib_name_dir}/$1[[0-9]]*.lib 2>/dev/null ` \
`ls -dr ${tea_lib_name_dir}/lib$1[[0-9]]* 2>/dev/null ` \
`ls -dr /usr/lib/$1[[0-9]]*.lib 2>/dev/null ` \
`ls -dr /usr/lib/lib$1[[0-9]]* 2>/dev/null ` \
`ls -dr /usr/local/lib/$1[[0-9]]*.lib 2>/dev/null ` \
`ls -dr /usr/local/lib/lib$1[[0-9]]* 2>/dev/null ` ; do
if test -f "$i" ; then
tea_lib_name_dir=`dirname $i`
$1_LIB_NAME=`basename $i`
$1_LIB_PATH_NAME=$i
break
fi
done
if test "${TEA_PLATFORM}" = "windows"; then
$1_LIB_SPEC=\"`${CYGPATH} ${$1_LIB_PATH_NAME} 2>/dev/null`\"
else
# Strip off the leading "lib" and trailing ".a" or ".so"
tea_lib_name_lib=`echo ${$1_LIB_NAME}|sed -e 's/^lib//' -e 's/\.[[^.]]*$//' -e 's/\.so.*//'`
$1_LIB_SPEC="-L${tea_lib_name_dir} -l${tea_lib_name_lib}"
fi
if test "x${$1_LIB_NAME}" = x ; then
AC_MSG_ERROR([not found])
else
AC_MSG_RESULT([${$1_LIB_SPEC}])
fi
])
#------------------------------------------------------------------------
# TEA_PRIVATE_TCL_HEADERS --
#
# Locate the private Tcl include files
#
# Arguments:
#
# Requires:
# TCL_SRC_DIR Assumes that TEA_LOAD_TCLCONFIG has
# already been called.
#
# Results:
#
# Substs the following vars:
# TCL_TOP_DIR_NATIVE
# TCL_GENERIC_DIR_NATIVE
# TCL_UNIX_DIR_NATIVE
# TCL_WIN_DIR_NATIVE
# TCL_BMAP_DIR_NATIVE
# TCL_TOOL_DIR_NATIVE
# TCL_PLATFORM_DIR_NATIVE
# TCL_BIN_DIR_NATIVE
# TCL_INCLUDES
#------------------------------------------------------------------------
AC_DEFUN(TEA_PRIVATE_TCL_HEADERS, [
AC_MSG_CHECKING([for Tcl private include files])
if test "${TEA_PLATFORM}" = "windows"; then
TCL_TOP_DIR_NATIVE=\"`${CYGPATH} ${TCL_SRC_DIR}`\"
TCL_GENERIC_DIR_NATIVE=\"`${CYGPATH} ${TCL_SRC_DIR}/generic`\"
TCL_UNIX_DIR_NATIVE=\"`${CYGPATH} ${TCL_SRC_DIR}/unix`\"
TCL_WIN_DIR_NATIVE=\"`${CYGPATH} ${TCL_SRC_DIR}/win`\"
TCL_BMAP_DIR_NATIVE=\"`${CYGPATH} ${TCL_SRC_DIR}/bitmaps`\"
TCL_TOOL_DIR_NATIVE=\"`${CYGPATH} ${TCL_SRC_DIR}/tools`\"
TCL_COMPAT_DIR_NATIVE=\"`${CYGPATH} ${TCL_SRC_DIR}/compat`\"
TCL_PLATFORM_DIR_NATIVE=${TCL_WIN_DIR_NATIVE}
TCL_INCLUDES="-I${TCL_GENERIC_DIR_NATIVE} -I${TCL_PLATFORM_DIR_NATIVE}"
else
TCL_TOP_DIR_NATIVE='$(TCL_SRC_DIR)'
TCL_GENERIC_DIR_NATIVE='${TCL_TOP_DIR_NATIVE}/generic'
TCL_UNIX_DIR_NATIVE='${TCL_TOP_DIR_NATIVE}/unix'
TCL_WIN_DIR_NATIVE='${TCL_TOP_DIR_NATIVE}/win'
TCL_BMAP_DIR_NATIVE='${TCL_TOP_DIR_NATIVE}/bitmaps'
TCL_TOOL_DIR_NATIVE='${TCL_TOP_DIR_NATIVE}/tools'
TCL_COMPAT_DIR_NATIVE='${TCL_TOP_DIR_NATIVE}/compat'
TCL_PLATFORM_DIR_NATIVE=${TCL_UNIX_DIR_NATIVE}
# substitute these in "relaxed" so that TCL_INCLUDES still works
# without requiring the other vars to be defined in the Makefile
eval "TCL_INCLUDES=\"-I${TCL_GENERIC_DIR_NATIVE} -I${TCL_PLATFORM_DIR_NATIVE}\""
fi
AC_SUBST(TCL_TOP_DIR_NATIVE)
AC_SUBST(TCL_GENERIC_DIR_NATIVE)
AC_SUBST(TCL_UNIX_DIR_NATIVE)
AC_SUBST(TCL_WIN_DIR_NATIVE)
AC_SUBST(TCL_BMAP_DIR_NATIVE)
AC_SUBST(TCL_TOOL_DIR_NATIVE)
AC_SUBST(TCL_PLATFORM_DIR_NATIVE)
AC_SUBST(TCL_INCLUDES)
AC_MSG_RESULT([Using srcdir found in tclConfig.sh: ${TCL_SRC_DIR}])
])
#------------------------------------------------------------------------
# TEA_PUBLIC_TCL_HEADERS --
#
# Locate the installed public Tcl header files
#
# Arguments:
# None.
#
# Requires:
# CYGPATH must be set
#
# Results:
#
# Adds a --with-tclinclude switch to configure.
# Result is cached.
#
# Substs the following vars:
# TCL_INCLUDES
#------------------------------------------------------------------------
AC_DEFUN(TEA_PUBLIC_TCL_HEADERS, [
AC_MSG_CHECKING([for Tcl public headers])
AC_ARG_WITH(tclinclude, [ --with-tclinclude directory containing the public Tcl header files], with_tclinclude=${withval})
AC_CACHE_VAL(ac_cv_c_tclh, [
# Use the value from --with-tclinclude, if it was given
if test x"${with_tclinclude}" != x ; then
if test -f "${with_tclinclude}/tcl.h" ; then
ac_cv_c_tclh=${with_tclinclude}
else
AC_MSG_ERROR([${with_tclinclude} directory does not contain tcl.h])
fi
else
# Check order: pkg --prefix location, Tcl's --prefix location,
# directory of tclConfig.sh, and Tcl source directory.
# Looking in the source dir is not ideal, but OK.
eval "temp_includedir=${includedir}"
list="`ls -d ${temp_includedir} 2>/dev/null` \
`ls -d ${TCL_PREFIX}/include 2>/dev/null` \
`ls -d ${TCL_BIN_DIR}/../include 2>/dev/null` \
`ls -d ${TCL_SRC_DIR}/generic 2>/dev/null`"
if test "${TEA_PLATFORM}" != "windows" -o "$GCC" = "yes"; then
list="$list /usr/local/include /usr/include"
fi
for i in $list ; do
if test -f "$i/tcl.h" ; then
ac_cv_c_tclh=$i
break
fi
done
fi
])
# Print a message based on how we determined the include path
if test x"${ac_cv_c_tclh}" = x ; then
AC_MSG_ERROR([tcl.h not found. Please specify its location with --with-tclinclude])
else
AC_MSG_RESULT([${ac_cv_c_tclh}])
fi
# Convert to a native path and substitute into the output files.
INCLUDE_DIR_NATIVE=`${CYGPATH} ${ac_cv_c_tclh}`
TCL_INCLUDES=-I\"${INCLUDE_DIR_NATIVE}\"
AC_SUBST(TCL_INCLUDES)
])
#------------------------------------------------------------------------
# TEA_PRIVATE_TK_HEADERS --
#
# Locate the private Tk include files
#
# Arguments:
#
# Requires:
# TK_SRC_DIR Assumes that TEA_LOAD_TKCONFIG has
# already been called.
#
# Results:
#
# Substs the following vars:
# TK_INCLUDES
#------------------------------------------------------------------------
AC_DEFUN(TEA_PRIVATE_TK_HEADERS, [
AC_MSG_CHECKING([for Tk private include files])
if test "${TEA_PLATFORM}" = "windows"; then
TK_TOP_DIR_NATIVE=\"`${CYGPATH} ${TK_SRC_DIR}`\"
TK_UNIX_DIR_NATIVE=\"`${CYGPATH} ${TK_SRC_DIR}/unix`\"
TK_WIN_DIR_NATIVE=\"`${CYGPATH} ${TK_SRC_DIR}/win`\"
TK_GENERIC_DIR_NATIVE=\"`${CYGPATH} ${TK_SRC_DIR}/generic`\"
TK_XLIB_DIR_NATIVE=\"`${CYGPATH} ${TK_SRC_DIR}/xlib`\"
TK_PLATFORM_DIR_NATIVE=${TK_WIN_DIR_NATIVE}
TK_INCLUDES="-I${TK_GENERIC_DIR_NATIVE} -I${TK_PLATFORM_DIR_NATIVE} -I${TK_XLIB_DIR_NATIVE}"
else
TK_TOP_DIR_NATIVE='${TK_SRC_DIR}'
TK_GENERIC_DIR_NATIVE='${TK_TOP_DIR_NATIVE}/generic'
TK_UNIX_DIR_NATIVE='${TK_TOP_DIR_NATIVE}/unix'
TK_WIN_DIR_NATIVE='${TK_TOP_DIR_NATIVE}/win'
TK_PLATFORM_DIR_NATIVE=${TK_UNIX_DIR_NATIVE}
# substitute these in "relaxed" so that TK_INCLUDES still works
# without requiring the other vars to be defined in the Makefile
eval "TK_INCLUDES=\"-I${TK_GENERIC_DIR_NATIVE} -I${TK_PLATFORM_DIR_NATIVE}\""
fi
AC_SUBST(TK_TOP_DIR_NATIVE)
AC_SUBST(TK_UNIX_DIR_NATIVE)
AC_SUBST(TK_WIN_DIR_NATIVE)
AC_SUBST(TK_GENERIC_DIR_NATIVE)
AC_SUBST(TK_XLIB_DIR_NATIVE)
AC_SUBST(TK_PLATFORM_DIR_NATIVE)
AC_SUBST(TK_INCLUDES)
AC_MSG_RESULT([Using srcdir found in tkConfig.sh: ${TK_SRC_DIR}])
])
#------------------------------------------------------------------------
# TEA_PUBLIC_TK_HEADERS --
#
# Locate the installed public Tk header files
#
# Arguments:
# None.
#
# Requires:
# CYGPATH must be set
#
# Results:
#
# Adds a --with-tkinclude switch to configure.
# Result is cached.
#
# Substs the following vars:
# TK_INCLUDES
#------------------------------------------------------------------------
AC_DEFUN(TEA_PUBLIC_TK_HEADERS, [
AC_MSG_CHECKING([for Tk public headers])
AC_ARG_WITH(tkinclude, [ --with-tkinclude directory containing the public Tk header files.], with_tkinclude=${withval})
AC_CACHE_VAL(ac_cv_c_tkh, [
# Use the value from --with-tkinclude, if it was given
if test x"${with_tkinclude}" != x ; then
if test -f "${with_tkinclude}/tk.h" ; then
ac_cv_c_tkh=${with_tkinclude}
else
AC_MSG_ERROR([${with_tkinclude} directory does not contain tk.h])
fi
else
# Check order: pkg --prefix location, Tcl's --prefix location,
# directory of tclConfig.sh, and Tcl source directory.
# Looking in the source dir is not ideal, but OK.
eval "temp_includedir=${includedir}"
list="`ls -d ${temp_includedir} 2>/dev/null` \
`ls -d ${TK_PREFIX}/include 2>/dev/null` \
`ls -d ${TCL_PREFIX}/include 2>/dev/null` \
`ls -d ${TCL_BIN_DIR}/../include 2>/dev/null` \
`ls -d ${TK_SRC_DIR}/generic 2>/dev/null`"
if test "${TEA_PLATFORM}" != "windows" -o "$GCC" = "yes"; then
list="$list /usr/local/include /usr/include"
fi
for i in $list ; do
if test -f "$i/tk.h" ; then
ac_cv_c_tkh=$i
break
fi
done
fi
])
# Print a message based on how we determined the include path
if test x"${ac_cv_c_tkh}" = x ; then
AC_MSG_ERROR([tk.h not found. Please specify its location with --with-tkinclude])
else
AC_MSG_RESULT([${ac_cv_c_tkh}])
fi
# Convert to a native path and substitute into the output files.
INCLUDE_DIR_NATIVE=`${CYGPATH} ${ac_cv_c_tkh}`
TK_INCLUDES=-I\"${INCLUDE_DIR_NATIVE}\"
AC_SUBST(TK_INCLUDES)
if test "${TEA_PLATFORM}" = "windows" ; then
# On Windows, we need the X compat headers
AC_MSG_CHECKING([for X11 header files])
if test ! -r "${INCLUDE_DIR_NATIVE}/X11/Xlib.h"; then
INCLUDE_DIR_NATIVE="`${CYGPATH} ${TK_SRC_DIR}/xlib`"
TK_XINCLUDES=-I\"${INCLUDE_DIR_NATIVE}\"
AC_SUBST(TK_XINCLUDES)
fi
AC_MSG_RESULT([${INCLUDE_DIR_NATIVE}])
fi
])
#------------------------------------------------------------------------
# TEA_PROG_TCLSH
# Locate a tclsh shell in the following directories:
# ${TCL_BIN_DIR} ${TCL_BIN_DIR}/../bin
# ${exec_prefix}/bin ${prefix}/bin
# ${PATH}
#
# Arguments
# none
#
# Results
# Subst's the following values:
# TCLSH_PROG
#------------------------------------------------------------------------
AC_DEFUN(TEA_PROG_TCLSH, [
AC_MSG_CHECKING([for tclsh])
AC_CACHE_VAL(ac_cv_path_tclsh, [
if test "x${CELIB_DIR}" != "x" ; then
# If CELIB_DIR is defined, assume Windows/CE target is requested
# which means target tclsh cannot be run (cross-compile)
search_path=`echo ${PATH} | sed -e 's/:/ /g'`
else
search_path=`echo ${TCL_BIN_DIR}:${TCL_BIN_DIR}/../bin:${exec_prefix}/bin:${prefix}/bin:${PATH} | sed -e 's/:/ /g'`
fi
for dir in $search_path ; do
for j in `ls -r $dir/tclsh[[8-9]]*${EXEEXT} 2> /dev/null` \
`ls -r $dir/tclsh*${EXEEXT} 2> /dev/null` ; do
if test x"$ac_cv_path_tclsh" = x ; then
if test -f "$j" ; then
ac_cv_path_tclsh=$j
break
fi
fi
done
done
])
if test -f "$ac_cv_path_tclsh" ; then
TCLSH_PROG=$ac_cv_path_tclsh
AC_MSG_RESULT([$TCLSH_PROG])
else
AC_MSG_ERROR([No tclsh found in PATH: $search_path])
fi
AC_SUBST(TCLSH_PROG)
])
#------------------------------------------------------------------------
# TEA_PROG_WISH
# Locate a wish shell in the following directories:
# ${TK_BIN_DIR} ${TK_BIN_DIR}/../bin
# ${TCL_BIN_DIR} ${TCL_BIN_DIR}/../bin
# ${exec_prefix}/bin ${prefix}/bin
# ${PATH}
#
# Arguments
# none
#
# Results
# Subst's the following values:
# WISH_PROG
#------------------------------------------------------------------------
AC_DEFUN(TEA_PROG_WISH, [
AC_MSG_CHECKING([for wish])
AC_CACHE_VAL(ac_cv_path_wish, [
if test "x${CELIB_DIR}" != "x" ; then
# If CELIB_DIR is defined, assume Windows/CE target is requested
# which means target wish cannot be run (cross-compile)
search_path=`echo ${PATH} | sed -e 's/:/ /g'`
else
search_path=`echo ${TK_BIN_DIR}:${TK_BIN_DIR}/../bin:${TCL_BIN_DIR}:${TCL_BIN_DIR}/../bin:${exec_prefix}/bin:${prefix}/bin:${PATH} | sed -e 's/:/ /g'`
fi
for dir in $search_path ; do
for j in `ls -r $dir/wish[[8-9]]*${EXEEXT} 2> /dev/null` \
`ls -r $dir/wish*${EXEEXT} 2> /dev/null` ; do
if test x"$ac_cv_path_wish" = x ; then
if test -f "$j" ; then
ac_cv_path_wish=$j
break
fi
fi
done
done
])
if test -f "$ac_cv_path_wish" ; then
WISH_PROG=$ac_cv_path_wish
AC_MSG_RESULT([$WISH_PROG])
else
AC_MSG_ERROR([No wish found in PATH: $search_path])
fi
AC_SUBST(WISH_PROG)
])
#------------------------------------------------------------------------
# TEA_PATH_CONFIG --
#
# Locate the ${1}Config.sh file and perform a sanity check on
# the ${1} compile flags. These are used by packages like
# [incr Tk] that load *Config.sh files from more than Tcl and Tk.
#
# Arguments:
# none
#
# Results:
#
# Adds the following arguments to configure:
# --with-$1=...
#
# Defines the following vars:
# $1_BIN_DIR Full path to the directory containing
# the $1Config.sh file
#------------------------------------------------------------------------
AC_DEFUN(TEA_PATH_CONFIG, [
#
# Ok, lets find the $1 configuration
# First, look for one uninstalled.
# the alternative search directory is invoked by --with-$1
#
if test x"${no_$1}" = x ; then
# we reset no_$1 in case something fails here
no_$1=true
AC_ARG_WITH($1, [ --with-$1 directory containing $1 configuration ($1Config.sh)], with_$1config=${withval})
AC_MSG_CHECKING([for $1 configuration])
AC_CACHE_VAL(ac_cv_c_$1config,[
# First check to see if --with-$1 was specified.
if test x"${with_$1config}" != x ; then
if test -f "${with_$1config}/$1Config.sh" ; then
ac_cv_c_$1config=`(cd ${with_$1config}; pwd)`
else
AC_MSG_ERROR([${with_$1config} directory doesn't contain $1Config.sh])
fi
fi
# then check for a private $1 installation
if test x"${ac_cv_c_$1config}" = x ; then
for i in \
../$1 \
`ls -dr ../$1[[8-9]].[[0-9]]* 2>/dev/null` \
../../$1 \
`ls -dr ../../$1[[8-9]].[[0-9]]* 2>/dev/null` \
../../../$1 \
`ls -dr ../../../$1[[8-9]].[[0-9]]* 2>/dev/null` \
${srcdir}/../$1 \
`ls -dr ${srcdir}/../$1[[8-9]].[[0-9]]* 2>/dev/null` \
; do
if test -f "$i/$1Config.sh" ; then
ac_cv_c_$1config=`(cd $i; pwd)`
break
fi
if test -f "$i/unix/$1Config.sh" ; then
ac_cv_c_$1config=`(cd $i/unix; pwd)`
break
fi
done
fi
# check in a few common install locations
if test x"${ac_cv_c_$1config}" = x ; then
for i in `ls -d ${exec_prefix}/lib 2>/dev/null` \
`ls -d ${prefix}/lib 2>/dev/null` \
`ls -d /usr/local/lib 2>/dev/null` \
`ls -d /usr/contrib/lib 2>/dev/null` \
`ls -d /usr/lib 2>/dev/null` \
; do
if test -f "$i/$1Config.sh" ; then
ac_cv_c_$1config=`(cd $i; pwd)`
break
fi
done
fi
])
if test x"${ac_cv_c_$1config}" = x ; then
$1_BIN_DIR="# no $1 configs found"
AC_MSG_WARN("Cannot find $1 configuration definitions")
exit 0
else
no_$1=
$1_BIN_DIR=${ac_cv_c_$1config}
AC_MSG_RESULT([found $$1_BIN_DIR/$1Config.sh])
fi
fi
])
#------------------------------------------------------------------------
# TEA_LOAD_CONFIG --
#
# Load the $1Config.sh file
#
# Arguments:
#
# Requires the following vars to be set:
# $1_BIN_DIR
#
# Results:
#
# Subst the following vars:
# $1_SRC_DIR
# $1_LIB_FILE
# $1_LIB_SPEC
#
#------------------------------------------------------------------------
AC_DEFUN(TEA_LOAD_CONFIG, [
AC_MSG_CHECKING([for existence of ${$1_BIN_DIR}/$1Config.sh])
if test -f "${$1_BIN_DIR}/$1Config.sh" ; then
AC_MSG_RESULT([loading])
. ${$1_BIN_DIR}/$1Config.sh
else
AC_MSG_RESULT([file not found])
fi
#
# If the $1_BIN_DIR is the build directory (not the install directory),
# then set the common variable name to the value of the build variables.
# For example, the variable $1_LIB_SPEC will be set to the value
# of $1_BUILD_LIB_SPEC. An extension should make use of $1_LIB_SPEC
# instead of $1_BUILD_LIB_SPEC since it will work with both an
# installed and uninstalled version of Tcl.
#
if test -f ${$1_BIN_DIR}/Makefile ; then
AC_MSG_WARN([Found Makefile - using build library specs for $1])
$1_LIB_SPEC=${$1_BUILD_LIB_SPEC}
$1_STUB_LIB_SPEC=${$1_BUILD_STUB_LIB_SPEC}
$1_STUB_LIB_PATH=${$1_BUILD_STUB_LIB_PATH}
fi
AC_SUBST($1_VERSION)
AC_SUBST($1_SRC_DIR)
AC_SUBST($1_LIB_FILE)
AC_SUBST($1_LIB_SPEC)
AC_SUBST($1_STUB_LIB_FILE)
AC_SUBST($1_STUB_LIB_SPEC)
AC_SUBST($1_STUB_LIB_PATH)
])
#------------------------------------------------------------------------
# TEA_PATH_CELIB --
#
# Locate Keuchel's celib emulation layer for targeting Win/CE
#
# Arguments:
# none
#
# Results:
#
# Adds the following arguments to configure:
# --with-celib=...
#
# Defines the following vars:
# CELIB_DIR Full path to the directory containing
# the include and platform lib files
#------------------------------------------------------------------------
AC_DEFUN(TEA_PATH_CELIB, [
# First, look for one uninstalled.
# the alternative search directory is invoked by --with-celib
if test x"${no_celib}" = x ; then
# we reset no_celib in case something fails here
no_celib=true
AC_ARG_WITH(celib,[ --with-celib=DIR use Windows/CE support library from DIR], with_celibconfig=${withval})
AC_MSG_CHECKING([for Windows/CE celib directory])
AC_CACHE_VAL(ac_cv_c_celibconfig,[
# First check to see if --with-celibconfig was specified.
if test x"${with_celibconfig}" != x ; then
if test -d "${with_celibconfig}/inc" ; then
ac_cv_c_celibconfig=`(cd ${with_celibconfig}; pwd)`
else
AC_MSG_ERROR([${with_celibconfig} directory doesn't contain inc directory])
fi
fi
# then check for a celib library
if test x"${ac_cv_c_celibconfig}" = x ; then
for i in \
../celib-palm-3.0 \
../celib \
../../celib-palm-3.0 \
../../celib \
`ls -dr ../celib-*3.[[0-9]]* 2>/dev/null` \
${srcdir}/../celib-palm-3.0 \
${srcdir}/../celib \
`ls -dr ${srcdir}/../celib-*3.[[0-9]]* 2>/dev/null` \
; do
if test -d "$i/inc" ; then
ac_cv_c_celibconfig=`(cd $i; pwd)`
break
fi
done
fi
])
if test x"${ac_cv_c_celibconfig}" = x ; then
CELIB_DIR="# no Celib configs found"
AC_MSG_ERROR([Cannot find celib support library directory])
else
no_celib=
CELIB_DIR=${ac_cv_c_celibconfig}
AC_MSG_RESULT([found $CELIB_DIR])
fi
fi
])