Tcl Source Code

int
\fBTcl_JoinThread\fR(\fIid, result\fR)
.SH ARGUMENTS
.AS Tcl_CreateThreadProc proc out
.AP Tcl_Condition *condPtr in
A condition variable, which must be associated with a mutex lock.
.AP Tcl_Mutex *mutexPtr in

A mutex lock.

.AP "const Tcl_Time" *timePtr in
A time limit on the condition wait.  NULL to wait forever.
Note that a polling value of 0 seconds does not make much sense.
.AP Tcl_ThreadDataKey *keyPtr in
This identifies a block of thread local storage.  The key should be
static and process-wide, yet each thread will end up associating
a different block of storage with this key.
................................................................................
allocated and initialized to all zeros the first time each thread asks for it.
The storage is automatically deallocated by \fBTcl_FinalizeThread\fR.
.SS "SYNCHRONIZATION AND COMMUNICATION"
Tcl provides \fBTcl_ThreadQueueEvent\fR and \fBTcl_ThreadAlert\fR
for handling event queuing in multithreaded applications.  See
the \fBNotifier\fR manual page for more information on these procedures.
.PP




A mutex is a lock that is used to serialize all threads through a piece
of code by calling \fBTcl_MutexLock\fR and \fBTcl_MutexUnlock\fR.
If one thread holds a mutex, any other thread calling \fBTcl_MutexLock\fR will
block until \fBTcl_MutexUnlock\fR is called.
A mutex can be destroyed after its use by calling \fBTcl_MutexFinalize\fR.
The result of locking a mutex twice from the same thread is undefined.
On some platforms it will result in a deadlock.
The \fBTcl_MutexLock\fR, \fBTcl_MutexUnlock\fR and \fBTcl_MutexFinalize\fR

int
\fBTcl_JoinThread\fR(\fIid, result\fR)
.SH ARGUMENTS
.AS Tcl_CreateThreadProc proc out
.AP Tcl_Condition *condPtr in
A condition variable, which must be associated with a mutex lock.
.AP Tcl_Mutex *mutexPtr in
.VS TIP509
A recursive mutex lock.
.VE TIP509
.AP "const Tcl_Time" *timePtr in
A time limit on the condition wait.  NULL to wait forever.
Note that a polling value of 0 seconds does not make much sense.
.AP Tcl_ThreadDataKey *keyPtr in
This identifies a block of thread local storage.  The key should be
static and process-wide, yet each thread will end up associating
a different block of storage with this key.
................................................................................
allocated and initialized to all zeros the first time each thread asks for it.
The storage is automatically deallocated by \fBTcl_FinalizeThread\fR.
.SS "SYNCHRONIZATION AND COMMUNICATION"
Tcl provides \fBTcl_ThreadQueueEvent\fR and \fBTcl_ThreadAlert\fR
for handling event queuing in multithreaded applications.  See
the \fBNotifier\fR manual page for more information on these procedures.
.PP
A mutex is a
.VS TIP509
recursive
.VE TIP509
lock that is used to serialize all threads through a piece
of code by calling \fBTcl_MutexLock\fR and \fBTcl_MutexUnlock\fR.
If one thread holds a mutex, any other thread calling \fBTcl_MutexLock\fR will
block until \fBTcl_MutexUnlock\fR is called.
A mutex can be destroyed after its use by calling \fBTcl_MutexFinalize\fR.
The result of locking a mutex twice from the same thread is undefined.
On some platforms it will result in a deadlock.
The \fBTcl_MutexLock\fR, \fBTcl_MutexUnlock\fR and \fBTcl_MutexFinalize\fR

fi
eval ac_res=\$$3
	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
$as_echo "$ac_res" >&6; }
  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno

} # ac_fn_c_check_func















































# ac_fn_c_check_type LINENO TYPE VAR INCLUDES
# -------------------------------------------
# Tests whether TYPE exists after having included INCLUDES, setting cache
# variable VAR accordingly.
ac_fn_c_check_type ()
{
................................................................................
#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
_ACEOF

fi
done

    LIBS=$ac_saved_libs





















# Add the threads support libraries
LIBS="$LIBS$THREADS_LIBS"


    { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to build libraries" >&5

fi
eval ac_res=\$$3
	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
$as_echo "$ac_res" >&6; }
  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno

} # ac_fn_c_check_func

# ac_fn_c_check_decl LINENO SYMBOL VAR INCLUDES
# ---------------------------------------------
# Tests whether SYMBOL is declared in INCLUDES, setting cache variable VAR
# accordingly.
ac_fn_c_check_decl ()
{
  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
  as_decl_name=`echo $2|sed 's/ *(.*//'`
  as_decl_use=`echo $2|sed -e 's/(/((/' -e 's/)/) 0&/' -e 's/,/) 0& (/g'`
  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $as_decl_name is declared" >&5
$as_echo_n "checking whether $as_decl_name is declared... " >&6; }
if eval \${$3+:} false; then :
  $as_echo_n "(cached) " >&6
else
  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h.  */
$4
int
main ()
{
#ifndef $as_decl_name
#ifdef __cplusplus
  (void) $as_decl_use;
#else
  (void) $as_decl_name;
#endif
#endif

  ;
  return 0;
}
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
  eval "$3=yes"
else
  eval "$3=no"
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
eval ac_res=\$$3
	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
$as_echo "$ac_res" >&6; }
  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno

} # ac_fn_c_check_decl

# ac_fn_c_check_type LINENO TYPE VAR INCLUDES
# -------------------------------------------
# Tests whether TYPE exists after having included INCLUDES, setting cache
# variable VAR accordingly.
ac_fn_c_check_type ()
{
................................................................................
#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
_ACEOF

fi
done

    LIBS=$ac_saved_libs

    # TIP #509
    ac_fn_c_check_decl "$LINENO" "PTHREAD_MUTEX_RECURSIVE" "ac_cv_have_decl_PTHREAD_MUTEX_RECURSIVE" "#include <pthread.h>
"
if test "x$ac_cv_have_decl_PTHREAD_MUTEX_RECURSIVE" = xyes; then :
  ac_have_decl=1
else
  ac_have_decl=0
fi

cat >>confdefs.h <<_ACEOF
#define HAVE_DECL_PTHREAD_MUTEX_RECURSIVE $ac_have_decl
_ACEOF
if test $ac_have_decl = 1; then :
  tcl_ok=yes
else
  tcl_ok=no
fi



# Add the threads support libraries
LIBS="$LIBS$THREADS_LIBS"


    { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to build libraries" >&5

    # Does the pthread-implementation provide
    # 'pthread_attr_setstacksize' ?

    ac_saved_libs=$LIBS
    LIBS="$LIBS $THREADS_LIBS"
    AC_CHECK_FUNCS(pthread_attr_setstacksize pthread_atfork)
    LIBS=$ac_saved_libs



])

#--------------------------------------------------------------------
# SC_TCL_EARLY_FLAGS
#
#	Check for what flags are needed to be passed so the correct OS
#	features are available.

    # Does the pthread-implementation provide
    # 'pthread_attr_setstacksize' ?

    ac_saved_libs=$LIBS
    LIBS="$LIBS $THREADS_LIBS"
    AC_CHECK_FUNCS(pthread_attr_setstacksize pthread_atfork)
    LIBS=$ac_saved_libs

    # TIP #509
    AC_CHECK_DECLS([PTHREAD_MUTEX_RECURSIVE],tcl_ok=yes,tcl_ok=no, [[#include <pthread.h>]])
])

#--------------------------------------------------------------------
# SC_TCL_EARLY_FLAGS
#
#	Check for what flags are needed to be passed so the correct OS
#	features are available.

 * See the file "license.terms" for information on usage and redistribution of
 * this file, and for a DISCLAIMER OF ALL WARRANTIES.
 */

#include "tclInt.h"

#if TCL_THREADS


















































































































































#ifndef TCL_NO_DEPRECATED
typedef struct {
    char nabuf[16];
} ThreadSpecificData;

static Tcl_ThreadDataKey dataKey;
#endif


/*
 * masterLock is used to serialize creation of mutexes, condition variables,
 * and thread local storage. This is the only place that can count on the
 * ability to statically initialize the mutex.
 */

................................................................................
static pthread_mutex_t initLock = PTHREAD_MUTEX_INITIALIZER;

/*
 * allocLock is used by Tcl's version of malloc for synchronization. For
 * obvious reasons, cannot use any dyamically allocated storage.
 */

static pthread_mutex_t allocLock = PTHREAD_MUTEX_INITIALIZER;







static pthread_mutex_t *allocLockPtr = &allocLock;

#endif /* TCL_THREADS */
 
/*
 *----------------------------------------------------------------------
 *
 * TclpThreadCreate --
................................................................................
	if (!result && (size < TCL_THREAD_STACK_MIN)) {
	    pthread_attr_setstacksize(&attr, (size_t) TCL_THREAD_STACK_MIN);
	}
#endif /* TCL_THREAD_STACK_MIN */
    }
#endif /* HAVE_PTHREAD_ATTR_SETSTACKSIZE */

    if (! (flags & TCL_THREAD_JOINABLE)) {
	pthread_attr_setdetachstate (&attr, PTHREAD_CREATE_DETACHED);
    }

    if (pthread_create(&theThread, &attr,
	    (void * (*)(void *))proc, (void *)clientData) &&
	    pthread_create(&theThread, NULL,
		    (void * (*)(void *))proc, (void *)clientData)) {
	result = TCL_ERROR;
    } else {
	*idPtr = (Tcl_ThreadId)theThread;
	result = TCL_OK;
    }
    pthread_attr_destroy(&attr);
    return result;
#else
    return TCL_ERROR;
#endif /* TCL_THREADS */
................................................................................
void
TclpMasterLock(void)
{
#if TCL_THREADS
    pthread_mutex_lock(&masterLock);
#endif
}

 
/*
 *----------------------------------------------------------------------
 *
 * TclpMasterUnlock
 *
 *	This procedure is used to release a lock that serializes creation and
................................................................................
 *----------------------------------------------------------------------
 */

Tcl_Mutex *
Tcl_GetAllocMutex(void)
{
#if TCL_THREADS
    pthread_mutex_t **allocLockPtrPtr = &allocLockPtr;


    return (Tcl_Mutex *) allocLockPtrPtr;
#else
    return NULL;
#endif
}

#if TCL_THREADS
................................................................................
 *	first time this Tcl_Mutex is used.
 *
 *----------------------------------------------------------------------
 */

void
Tcl_MutexLock(
    Tcl_Mutex *mutexPtr)	/* Really (pthread_mutex_t **) */
{
    pthread_mutex_t *pmutexPtr;

    if (*mutexPtr == NULL) {
	pthread_mutex_lock(&masterLock);
	if (*mutexPtr == NULL) {
	    /*
	     * Double inside master lock check to avoid a race condition.
	     */

	    pmutexPtr = ckalloc(sizeof(pthread_mutex_t));
	    pthread_mutex_init(pmutexPtr, NULL);
	    *mutexPtr = (Tcl_Mutex)pmutexPtr;
	    TclRememberMutex(mutexPtr);
	}
	pthread_mutex_unlock(&masterLock);
    }
    pmutexPtr = *((pthread_mutex_t **)mutexPtr);
    pthread_mutex_lock(pmutexPtr);
}
 
/*
 *----------------------------------------------------------------------
 *
 * Tcl_MutexUnlock --
 *
................................................................................
 *	The mutex is released when this returns.
 *
 *----------------------------------------------------------------------
 */

void
Tcl_MutexUnlock(
    Tcl_Mutex *mutexPtr)	/* Really (pthread_mutex_t **) */
{
    pthread_mutex_t *pmutexPtr = *(pthread_mutex_t **) mutexPtr;

    pthread_mutex_unlock(pmutexPtr);
}
 
/*
 *----------------------------------------------------------------------
 *
 * TclpFinalizeMutex --
 *
................................................................................
 *----------------------------------------------------------------------
 */

void
TclpFinalizeMutex(
    Tcl_Mutex *mutexPtr)
{
    pthread_mutex_t *pmutexPtr = *(pthread_mutex_t **) mutexPtr;

    if (pmutexPtr != NULL) {
	pthread_mutex_destroy(pmutexPtr);
	ckfree(pmutexPtr);
	*mutexPtr = NULL;
    }
}
 
/*
 *----------------------------------------------------------------------
................................................................................
 *
 *----------------------------------------------------------------------
 */

void
Tcl_ConditionWait(
    Tcl_Condition *condPtr,	/* Really (pthread_cond_t **) */
    Tcl_Mutex *mutexPtr,	/* Really (pthread_mutex_t **) */
    const Tcl_Time *timePtr) /* Timeout on waiting period */
{
    pthread_cond_t *pcondPtr;
    pthread_mutex_t *pmutexPtr;
    struct timespec ptime;

    if (*condPtr == NULL) {
	pthread_mutex_lock(&masterLock);

	/*
	 * Double check inside mutex to avoid race, then initialize condition
................................................................................
	    pcondPtr = ckalloc(sizeof(pthread_cond_t));
	    pthread_cond_init(pcondPtr, NULL);
	    *condPtr = (Tcl_Condition) pcondPtr;
	    TclRememberCondition(condPtr);
	}
	pthread_mutex_unlock(&masterLock);
    }
    pmutexPtr = *((pthread_mutex_t **)mutexPtr);
    pcondPtr = *((pthread_cond_t **)condPtr);
    if (timePtr == NULL) {
	pthread_cond_wait(pcondPtr, pmutexPtr);
    } else {
	Tcl_Time now;

	/*
	 * Make sure to take into account the microsecond component of the
	 * current time, including possible overflow situations. [Bug #411603]
	 */

	Tcl_GetTime(&now);
	ptime.tv_sec = timePtr->sec + now.sec +
	    (timePtr->usec + now.usec) / 1000000;
	ptime.tv_nsec = 1000 * ((timePtr->usec + now.usec) % 1000000);
	pthread_cond_timedwait(pcondPtr, pmutexPtr, &ptime);
    }
}
 
/*
 *----------------------------------------------------------------------
 *
 * Tcl_ConditionNotify --
................................................................................
 *----------------------------------------------------------------------
 */

void
Tcl_ConditionNotify(
    Tcl_Condition *condPtr)
{
    pthread_cond_t *pcondPtr = *((pthread_cond_t **)condPtr);

    if (pcondPtr != NULL) {
	pthread_cond_broadcast(pcondPtr);
    } else {
	/*
	 * Noone has used the condition variable, so there are no waiters.
	 */
    }
}
 
/*
 *----------------------------------------------------------------------
 *
................................................................................
 *----------------------------------------------------------------------
 */

void
TclpFinalizeCondition(
    Tcl_Condition *condPtr)
{
    pthread_cond_t *pcondPtr = *(pthread_cond_t **)condPtr;

    if (pcondPtr != NULL) {
	pthread_cond_destroy(pcondPtr);
	ckfree(pcondPtr);
	*condPtr = NULL;
    }
}
................................................................................
 */

#ifdef USE_THREAD_ALLOC
static pthread_key_t key;

typedef struct {
    Tcl_Mutex tlock;
    pthread_mutex_t plock;
} allocMutex;

Tcl_Mutex *
TclpNewAllocMutex(void)
{
    allocMutex *lockPtr;
    register pthread_mutex_t *plockPtr;

    lockPtr = malloc(sizeof(allocMutex));
    if (lockPtr == NULL) {
	Tcl_Panic("could not allocate lock");
    }
    plockPtr = &lockPtr->plock;
    lockPtr->tlock = (Tcl_Mutex) plockPtr;
    pthread_mutex_init(&lockPtr->plock, NULL);
    return &lockPtr->tlock;
}

void
TclpFreeAllocMutex(
    Tcl_Mutex *mutex)		/* The alloc mutex to free. */
{
    allocMutex* lockPtr = (allocMutex*) mutex;

    if (!lockPtr) {
	return;
    }
    pthread_mutex_destroy(&lockPtr->plock);
    free(lockPtr);
}

void
TclpInitAllocCache(void)
{
    pthread_key_create(&key, NULL);
................................................................................
#endif /* USE_THREAD_ALLOC */

void *
TclpThreadCreateKey(void)
{
    pthread_key_t *ptkeyPtr;

    ptkeyPtr = TclpSysAlloc(sizeof *ptkeyPtr, 0);
    if (NULL == ptkeyPtr) {
	Tcl_Panic("unable to allocate thread key!");
    }

    if (pthread_key_create(ptkeyPtr, NULL)) {
	Tcl_Panic("unable to create pthread key!");
    }

 * See the file "license.terms" for information on usage and redistribution of
 * this file, and for a DISCLAIMER OF ALL WARRANTIES.
 */

#include "tclInt.h"

#if TCL_THREADS
 
/*
 * TIP #509. Ensures that Tcl's mutexes are reentrant.
 *
 *----------------------------------------------------------------------
 *
 * PMutexInit --
 *
 *	Sets up the memory pointed to by its argument so that it contains the
 *	implementation of a recursive lock. Caller supplies the space.
 *
 *----------------------------------------------------------------------
 *
 * PMutexDestroy --
 *
 *	Tears down the implementation of a recursive lock (but does not
 *	deallocate the space holding the lock).
 *
 *----------------------------------------------------------------------
 *
 * PMutexLock --
 *
 *	Locks a recursive lock. (Similar to pthread_mutex_lock)
 *
 *----------------------------------------------------------------------
 *
 * PMutexUnlock --
 *
 *	Unlocks a recursive lock. (Similar to pthread_mutex_unlock)
 *
 *----------------------------------------------------------------------
 *
 * PCondWait --
 *
 *	Waits on a condition variable linked a recursive lock. (Similar to
 *	pthread_cond_wait)
 *
 *----------------------------------------------------------------------
 *
 * PCondTimedWait --
 *
 *	Waits for a limited amount of time on a condition variable linked to a
 *	recursive lock. (Similar to pthread_cond_timedwait)
 *
 *----------------------------------------------------------------------
 */

#ifndef HAVE_DECL_PTHREAD_MUTEX_RECURSIVE
#define HAVE_DECL_PTHREAD_MUTEX_RECURSIVE 0
#endif

#if HAVE_DECL_PTHREAD_MUTEX_RECURSIVE
/*
 * Pthread has native reentrant (AKA recursive) mutexes. Use them for
 * Tcl_Mutex.
 */

typedef pthread_mutex_t PMutex;

static void
PMutexInit(
    PMutex *pmutexPtr)
{
    pthread_mutexattr_t attr;

    pthread_mutexattr_init(&attr);
    pthread_mutexattr_settype(&attr, PTHREAD_MUTEX_RECURSIVE);
    pthread_mutex_init(pmutexPtr, &attr);
}

#define PMutexDestroy	pthread_mutex_destroy
#define PMutexLock	pthread_mutex_lock
#define PMutexUnlock	pthread_mutex_unlock
#define PCondWait	pthread_cond_wait
#define PCondTimedWait	pthread_cond_timedwait

#else /* !HAVE_PTHREAD_MUTEX_RECURSIVE */

/*
 * No native support for reentrant mutexes. Emulate them with regular mutexes
 * and thread-local counters.
 */

typedef struct PMutex {
    pthread_mutex_t mutex;
    pthread_t thread;
    int counter;
} PMutex;

static void
PMutexInit(
    PMutex *pmutexPtr)
{
    pthread_mutex_init(&pmutexPtr->mutex, NULL);
    pmutexPtr->thread = 0;
    pmutexPtr->counter = 0;
}

static void
PMutexDestroy(
    PMutex *pmutexPtr)
{
    pthread_mutex_destroy(&pmutexPtr->mutex);
}

static void
PMutexLock(
    PMutex *pmutexPtr)
{
    if (pmutexPtr->thread != pthread_self() || pmutexPtr->counter == 0) {
	pthread_mutex_lock(&pmutexPtr->mutex);
	pmutexPtr->thread = pthread_self();
	pmutexPtr->counter = 0;
    }
    pmutexPtr->counter++;
}

static void
PMutexUnlock(
    PMutex *pmutexPtr)
{
    pmutexPtr->counter--;
    if (pmutexPtr->counter == 0) {
	pmutexPtr->thread = 0;
	pthread_mutex_unlock(&pmutexPtr->mutex);
    }
}

static void
PCondWait(
    pthread_cond_t *pcondPtr,
    PMutex *pmutexPtr)
{
    pthread_cond_wait(pcondPtr, &pmutexPtr->mutex);
}

static void
PCondTimedWait(
    pthread_cond_t *pcondPtr,
    PMutex *pmutexPtr,
    struct timespec *ptime)
{
    pthread_cond_timedwait(pcondPtr, &pmutexPtr->mutex, ptime);
}
#endif /* HAVE_PTHREAD_MUTEX_RECURSIVE */
 
#ifndef TCL_NO_DEPRECATED
typedef struct {
    char nabuf[16];
} ThreadSpecificData;

static Tcl_ThreadDataKey dataKey;

#endif /* TCL_NO_DEPRECATED */

/*
 * masterLock is used to serialize creation of mutexes, condition variables,
 * and thread local storage. This is the only place that can count on the
 * ability to statically initialize the mutex.
 */

................................................................................
static pthread_mutex_t initLock = PTHREAD_MUTEX_INITIALIZER;

/*
 * allocLock is used by Tcl's version of malloc for synchronization. For
 * obvious reasons, cannot use any dyamically allocated storage.
 */

static PMutex allocLock;
static pthread_once_t allocLockInitOnce = PTHREAD_ONCE_INIT;

static void
allocLockInit(void)
{
    PMutexInit(&allocLock);
}
static PMutex *allocLockPtr = &allocLock;

#endif /* TCL_THREADS */
 
/*
 *----------------------------------------------------------------------
 *
 * TclpThreadCreate --
................................................................................
	if (!result && (size < TCL_THREAD_STACK_MIN)) {
	    pthread_attr_setstacksize(&attr, (size_t) TCL_THREAD_STACK_MIN);
	}
#endif /* TCL_THREAD_STACK_MIN */
    }
#endif /* HAVE_PTHREAD_ATTR_SETSTACKSIZE */

    if (!(flags & TCL_THREAD_JOINABLE)) {
	pthread_attr_setdetachstate(&attr, PTHREAD_CREATE_DETACHED);
    }

    if (pthread_create(&theThread, &attr,
	    (void * (*)(void *)) proc, (void *) clientData) &&
	    pthread_create(&theThread, NULL,
		    (void * (*)(void *)) proc, (void *) clientData)) {
	result = TCL_ERROR;
    } else {
	*idPtr = (Tcl_ThreadId) theThread;
	result = TCL_OK;
    }
    pthread_attr_destroy(&attr);
    return result;
#else
    return TCL_ERROR;
#endif /* TCL_THREADS */
................................................................................
void
TclpMasterLock(void)
{
#if TCL_THREADS
    pthread_mutex_lock(&masterLock);
#endif
}

 
/*
 *----------------------------------------------------------------------
 *
 * TclpMasterUnlock
 *
 *	This procedure is used to release a lock that serializes creation and
................................................................................
 *----------------------------------------------------------------------
 */

Tcl_Mutex *
Tcl_GetAllocMutex(void)
{
#if TCL_THREADS
    PMutex **allocLockPtrPtr = &allocLockPtr;

    pthread_once(&allocLockInitOnce, allocLockInit);
    return (Tcl_Mutex *) allocLockPtrPtr;
#else
    return NULL;
#endif
}

#if TCL_THREADS
................................................................................
 *	first time this Tcl_Mutex is used.
 *
 *----------------------------------------------------------------------
 */

void
Tcl_MutexLock(
    Tcl_Mutex *mutexPtr)	/* Really (PMutex **) */
{
    PMutex *pmutexPtr;

    if (*mutexPtr == NULL) {
	pthread_mutex_lock(&masterLock);
	if (*mutexPtr == NULL) {
	    /*
	     * Double inside master lock check to avoid a race condition.
	     */

	    pmutexPtr = ckalloc(sizeof(PMutex));
	    PMutexInit(pmutexPtr);
	    *mutexPtr = (Tcl_Mutex) pmutexPtr;
	    TclRememberMutex(mutexPtr);
	}
	pthread_mutex_unlock(&masterLock);
    }
    pmutexPtr = *((PMutex **) mutexPtr);
    PMutexLock(pmutexPtr);
}
 
/*
 *----------------------------------------------------------------------
 *
 * Tcl_MutexUnlock --
 *
................................................................................
 *	The mutex is released when this returns.
 *
 *----------------------------------------------------------------------
 */

void
Tcl_MutexUnlock(
    Tcl_Mutex *mutexPtr)	/* Really (PMutex **) */
{
    PMutex *pmutexPtr = *(PMutex **) mutexPtr;

    PMutexUnlock(pmutexPtr);
}
 
/*
 *----------------------------------------------------------------------
 *
 * TclpFinalizeMutex --
 *
................................................................................
 *----------------------------------------------------------------------
 */

void
TclpFinalizeMutex(
    Tcl_Mutex *mutexPtr)
{
    PMutex *pmutexPtr = *(PMutex **) mutexPtr;

    if (pmutexPtr != NULL) {
	PMutexDestroy(pmutexPtr);
	ckfree(pmutexPtr);
	*mutexPtr = NULL;
    }
}
 
/*
 *----------------------------------------------------------------------
................................................................................
 *
 *----------------------------------------------------------------------
 */

void
Tcl_ConditionWait(
    Tcl_Condition *condPtr,	/* Really (pthread_cond_t **) */
    Tcl_Mutex *mutexPtr,	/* Really (PMutex **) */
    const Tcl_Time *timePtr) /* Timeout on waiting period */
{
    pthread_cond_t *pcondPtr;
    PMutex *pmutexPtr;
    struct timespec ptime;

    if (*condPtr == NULL) {
	pthread_mutex_lock(&masterLock);

	/*
	 * Double check inside mutex to avoid race, then initialize condition
................................................................................
	    pcondPtr = ckalloc(sizeof(pthread_cond_t));
	    pthread_cond_init(pcondPtr, NULL);
	    *condPtr = (Tcl_Condition) pcondPtr;
	    TclRememberCondition(condPtr);
	}
	pthread_mutex_unlock(&masterLock);
    }
    pmutexPtr = *((PMutex **) mutexPtr);
    pcondPtr = *((pthread_cond_t **) condPtr);
    if (timePtr == NULL) {
	PCondWait(pcondPtr, pmutexPtr);
    } else {
	Tcl_Time now;

	/*
	 * Make sure to take into account the microsecond component of the
	 * current time, including possible overflow situations. [Bug #411603]
	 */

	Tcl_GetTime(&now);
	ptime.tv_sec = timePtr->sec + now.sec +
	    (timePtr->usec + now.usec) / 1000000;
	ptime.tv_nsec = 1000 * ((timePtr->usec + now.usec) % 1000000);
	PCondTimedWait(pcondPtr, pmutexPtr, &ptime);
    }
}
 
/*
 *----------------------------------------------------------------------
 *
 * Tcl_ConditionNotify --
................................................................................
 *----------------------------------------------------------------------
 */

void
Tcl_ConditionNotify(
    Tcl_Condition *condPtr)
{
    pthread_cond_t *pcondPtr = *((pthread_cond_t **) condPtr);

    if (pcondPtr != NULL) {
	pthread_cond_broadcast(pcondPtr);
    } else {
	/*
	 * No-one has used the condition variable, so there are no waiters.
	 */
    }
}
 
/*
 *----------------------------------------------------------------------
 *
................................................................................
 *----------------------------------------------------------------------
 */

void
TclpFinalizeCondition(
    Tcl_Condition *condPtr)
{
    pthread_cond_t *pcondPtr = *(pthread_cond_t **) condPtr;

    if (pcondPtr != NULL) {
	pthread_cond_destroy(pcondPtr);
	ckfree(pcondPtr);
	*condPtr = NULL;
    }
}
................................................................................
 */

#ifdef USE_THREAD_ALLOC
static pthread_key_t key;

typedef struct {
    Tcl_Mutex tlock;
    PMutex plock;
} AllocMutex;

Tcl_Mutex *
TclpNewAllocMutex(void)
{
    AllocMutex *lockPtr;
    register PMutex *plockPtr;

    lockPtr = malloc(sizeof(AllocMutex));
    if (lockPtr == NULL) {
	Tcl_Panic("could not allocate lock");
    }
    plockPtr = &lockPtr->plock;
    lockPtr->tlock = (Tcl_Mutex) plockPtr;
    PMutexInit(&lockPtr->plock);
    return &lockPtr->tlock;
}

void
TclpFreeAllocMutex(
    Tcl_Mutex *mutex)		/* The alloc mutex to free. */
{
    AllocMutex *lockPtr = (AllocMutex *) mutex;

    if (!lockPtr) {
	return;
    }
    PMutexDestroy(&lockPtr->plock);
    free(lockPtr);
}

void
TclpInitAllocCache(void)
{
    pthread_key_create(&key, NULL);
................................................................................
#endif /* USE_THREAD_ALLOC */

void *
TclpThreadCreateKey(void)
{
    pthread_key_t *ptkeyPtr;

    ptkeyPtr = TclpSysAlloc(sizeof(pthread_key_t), 0);
    if (NULL == ptkeyPtr) {
	Tcl_Panic("unable to allocate thread key!");
    }

    if (pthread_key_create(ptkeyPtr, NULL)) {
	Tcl_Panic("unable to create pthread key!");
    }